summaryrefslogtreecommitdiff
path: root/target/linux/generic/files/drivers/net
AgeCommit message (Expand)Author
2014-03-30revert: kernel: rtl8306: fix max pvid & remove port isolationblogic
2014-03-30kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfxblogic
2014-03-30kernel: rtl8306: fix max pvid & remove port isolationblogic
2014-03-30kernel: rtl8306: cosmetic changes for swconfigblogic
2014-02-22b53: Make b53_switch_init staticjogo
2014-02-22b53: Add BCM53128 switch supportjogo
2014-02-15kernel: rtl8306: update reset functionluka
2014-01-26ar71xx: swconfig: use the local helper to set LED brightness on link downjuhosg
2014-01-21modules: swconfig.c: update the error path on 3.13, and behave nicely with re...wigyori
2014-01-21modules: update swconfig.c to compile on 3.13 (compile-tested)wigyori
2014-01-20b53: use drvdata to store driver datahauke
2014-01-20b53: make b53_switch_reset_gpio() statichauke
2014-01-20generic: ar8216: add custom LED support for the AR8327 switchjuhosg
2014-01-20generic: ar8216: allow to use chip specific cleanup callbackjuhosg
2014-01-20generic: ar8216: add optimized rmw operationjuhosg
2013-12-15generic: ar8216: Enable jumbo frames on AR8327 by defaultjuhosg
2013-11-29generic: ar8216: add AR8337N switch supportjuhosg
2013-11-29generic: ar8216: remove trailing whitespacesjuhosg
2013-11-13kernel: b53: fix untagged shift for BCM5365hauke
2013-11-10kernel: b53: add initial support for switches in BCM5301Xhauke
2013-11-09kernel: adm6996: add support for ADM6996L and GPIO interfacehauke
2013-10-24kernel: make swconfig checkpath compliantflorian
2013-10-06kernel: b53: add switch name into printk when it fails.hauke
2013-09-25kernel: b53: add Register Access Bridge Registers (SRAB) interfacehauke
2013-09-15kernel: b53: detect revision of BCM5325hauke
2013-09-15kernel: b53: fix vlan write for BCM5325 revison 3+hauke
2013-09-14kernel: b53: use hard coded switch reset gpio on some boards.hauke
2013-09-14kernel: b53: add soft reset for BCM539x switcheshauke
2013-09-05kernel: b53: support phy ids for BCM5365jogo
2013-09-04kernel: b53: allow access the MIB counters on BCM5365hauke
2013-08-12rtl8367: add support for configuring the VLAN FIDnbd
2013-08-01kernel: b53: use devm_gpio_request_one() to request gpiohauke
2013-08-01kernel: b53: add support for GPIO resethauke
2013-07-27strict_strtoul is obsolete, use kstrtoul insteadblogic
2013-07-14brcm47xx: use b53 phy driver for the switch in kernel 3.10hauke
2013-06-04generic: add port mirroring/monitoring capability to rtl8366rb switchjuhosg
2013-05-30generic: ar8216: allow to specify SGMII config via platform datajuhosg
2013-05-30generic: ar8216: add get_port_link callbackjuhosg
2013-05-30generic: ar8216: show chip revision in the kernel logjuhosg
2013-05-24generic: ar8216: add port mirroringluka
2013-05-13kernel: add missing PHY ID for an AR8327 switch variantnbd
2013-05-09kernel: b53: use correct oops for bcm5365 switchhauke
2013-04-25generic: fix rtl8366_smi compile warningblogic
2013-04-12[geneirc] fix rtl8366s OF bindingblogic
2013-04-09[ramips] unbreak portmapping - typo fixblogic
2013-04-09[swconfig] allow loading port maps from OFblogic
2013-04-06generic: rtl8367: add compatible string with vendor prefixjuhosg
2013-04-06generic: rtl8367b: fix rtl8367b_extif_init_ofjuhosg
2013-04-06generic: rtl8367: allow to load extif config from OFjuhosg
2013-04-06generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macrojuhosg
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-24 19:06:58 +0000