summaryrefslogtreecommitdiff
path: root/target/linux/generic/files/drivers
AgeCommit message (Expand)Author
2014-03-30revert: kernel: rtl8306: fix max pvid & remove port isolationblogic
2014-03-30kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfxblogic
2014-03-30kernel: rtl8306: fix max pvid & remove port isolationblogic
2014-03-30kernel: rtl8306: cosmetic changes for swconfigblogic
2014-02-22b53: Make b53_switch_init staticjogo
2014-02-22b53: Add BCM53128 switch supportjogo
2014-02-15kernel: rtl8306: update reset functionluka
2014-01-26ar71xx: swconfig: use the local helper to set LED brightness on link downjuhosg
2014-01-24kernel/3.1x: add split code for LZMA compressed kernel based firmwaresjuhosg
2014-01-24Revert "kernel: create firmware partition from MyLoader partition parser"juhosg
2014-01-21modules: swconfig.c: update the error path on 3.13, and behave nicely with re...wigyori
2014-01-21modules: update swconfig.c to compile on 3.13 (compile-tested)wigyori
2014-01-20b53: use drvdata to store driver datahauke
2014-01-20b53: make b53_switch_reset_gpio() statichauke
2014-01-20generic: ar8216: add custom LED support for the AR8327 switchjuhosg
2014-01-20generic: ar8216: allow to use chip specific cleanup callbackjuhosg
2014-01-20generic: ar8216: add optimized rmw operationjuhosg
2013-12-15generic: ar8216: Enable jumbo frames on AR8327 by defaultjuhosg
2013-11-29generic: ar8216: add AR8337N switch supportjuhosg
2013-11-29generic: ar8216: remove trailing whitespacesjuhosg
2013-11-13kernel: b53: fix untagged shift for BCM5365hauke
2013-11-10kernel: b53: add initial support for switches in BCM5301Xhauke
2013-11-09kernel: adm6996: add support for ADM6996L and GPIO interfacehauke
2013-10-30generic: mtdsplit_uimage: add uImage magic for the WRN2200 boardjuhosg
2013-10-24kernel: make swconfig checkpath compliantflorian
2013-10-06kernel: b53: add switch name into printk when it fails.hauke
2013-09-25kernel: b53: add Register Access Bridge Registers (SRAB) interfacehauke
2013-09-25kernel: create firmware partition from MyLoader partition parserjuhosg
2013-09-21kernel/3.10: add partition parser for Seama firmwaresjuhosg
2013-09-21kernel/3.10: add partition parser for uImage firmwaresjuhosg
2013-09-21kernel/3.10: add default partition name defines to mtdsplit.hjuhosg
2013-09-21kernel/3.10: add more helpers to the mtdsplit codejuhosg
2013-09-21kernel/3.10: add separate rootfs partition parserjuhosg
2013-09-21kernel/3.10: move squashfs check from rootfs split code into a separate filejuhosg
2013-09-15kernel: b53: detect revision of BCM5325hauke
2013-09-15kernel: b53: fix vlan write for BCM5325 revison 3+hauke
2013-09-14kernel: b53: use hard coded switch reset gpio on some boards.hauke
2013-09-14kernel: b53: add soft reset for BCM539x switcheshauke
2013-09-05kernel: b53: support phy ids for BCM5365jogo
2013-09-04kernel: b53: allow access the MIB counters on BCM5365hauke
2013-09-02generic: remove linux version checks from myloader.cjuhosg
2013-08-12rtl8367: add support for configuring the VLAN FIDnbd
2013-08-01kernel: b53: use devm_gpio_request_one() to request gpiohauke
2013-08-01kernel: b53: add support for GPIO resethauke
2013-07-27strict_strtoul is obsolete, use kstrtoul insteadblogic
2013-07-21kernel: Remove gpio-pwm patcheslars
2013-07-19kernel: remove gpio_buttonsjogo
2013-07-14brcm47xx: use b53 phy driver for the switch in kernel 3.10hauke
2013-06-04generic: add port mirroring/monitoring capability to rtl8366rb switchjuhosg
2013-05-30generic: ar8216: allow to specify SGMII config via platform datajuhosg