move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the developers are ready

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@4944 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 66 deletions

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
deleted file mode 100755
index 4de124735b..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-# NVRAM setup
-#
-# This file handles the NVRAM quirks of various hardware.
-
-# WGT634u
-grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
-
-alias debug=${DEBUG:-:}
-
-nvram_default() {
-	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
-}
-
-nvram_set() { # for the linksys fixup part
-	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
-		COMMIT=1
-		/usr/sbin/nvram set "$1=$2"
-	}
-}
-
-# work around braindead CFE defaults in linksys routers
-boardtype=$(nvram get boardtype)
-boardnum=$(nvram get boardnum)
-boardflags=$(($(nvram get boardflags)))
-adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
-
-case "$(( $boardtype ))" in
-	"1800") #0x708
-		if [ "$adm_switch" = 0 ]; then
-			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_config 0x0062
-				nvram_set clkfreq 216
-				nvram_set sdram_ncdl 0x0
-				nvram_set pa0itssit 62
-				nvram_set pa0b0 0x15eb
-				nvram_set pa0b1 0xfa82
-				nvram_set pa0b2 0xfe66
-				nvram_set pa0maxpwr 0x4e
-			}
-		fi
-	;;
-	"1127") #0x467
-		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-		[ "$COMMIT" = 1 ] && {
-			nvram_set sdram_config 0x0062
-			nvram_set sdram_ncdl 0x0
-			nvram_set pa0itssit 62
-			nvram_set pa0b0 0x168b
-			nvram_set pa0b1 0xfabf
-			nvram_set pa0b2 0xfeaf
-			nvram_set pa0maxpwr 0x4e
-		}
-	;;
-esac
-[ "$COMMIT" = "1" ] && nvram commit
-
-# hack for some motorola routers
-nvram unset wl0gpio0
-
-[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-	# if default wifi mac, set two higher than the lan mac
-	nvram set il0macaddr=$(nvram get et0macaddr|
-	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-}