move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the developers are ready

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@4944 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 0 insertions, 217 deletions

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/hotplug.d/net/09-net b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/hotplug.d/net/09-net
deleted file mode 100644
index 9dd77963ba..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/hotplug.d/net/09-net
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-setup_wl()
-{
-	[ -f /proc/net/wl0 ] && {
-		lsmod | grep wlcompat >&- || insmod wlcompat
-	}
-	iwconfig "$INTERFACE" 2>&- | grep -v 'no wireless' >&- && {
-		/sbin/wifi
-	}
-}
-setup_eth()
-{
-	[ -d /proc/switch ] || {
-		insmod switch-core
-		insmod switch-robo || insmod switch-adm
-	}
-	if="$(echo "$INTERFACE" | sed s,eth,et,)"
-	ifconfig "$INTERFACE" up 2>&- >&-
-	[ -d "/proc/switch/$INTERFACE" ] || return 0
-	echo "1" > "/proc/switch/$INTERFACE/reset"
-	echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
-	for vlan in $(seq 0 15); do
-		eval "hwname=\"\${vlan${vlan}hwname}\""
-		[ "$hwname" = "$if" ] && {
-			eval "vports=\"\${vlan${vlan}ports}\""
-			[ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
-			$DEBUG vconfig add "$INTERFACE" "$vlan"
-		}
-	done
-}
-
-do_register()
-{
-	case "${INTERFACE%%[0-9]*}" in
-		eth) setup_eth;;
-		wl) setup_wl;;
-	esac
-}
-
-
-case "$ACTION" in
-	add|register) do_register;;
-esac
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
deleted file mode 100755
index 4de124735b..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-# NVRAM setup
-#
-# This file handles the NVRAM quirks of various hardware.
-
-# WGT634u
-grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
-
-alias debug=${DEBUG:-:}
-
-nvram_default() {
-	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
-}
-
-nvram_set() { # for the linksys fixup part
-	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
-		COMMIT=1
-		/usr/sbin/nvram set "$1=$2"
-	}
-}
-
-# work around braindead CFE defaults in linksys routers
-boardtype=$(nvram get boardtype)
-boardnum=$(nvram get boardnum)
-boardflags=$(($(nvram get boardflags)))
-adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
-
-case "$(( $boardtype ))" in
-	"1800") #0x708
-		if [ "$adm_switch" = 0 ]; then
-			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_config 0x0062
-				nvram_set clkfreq 216
-				nvram_set sdram_ncdl 0x0
-				nvram_set pa0itssit 62
-				nvram_set pa0b0 0x15eb
-				nvram_set pa0b1 0xfa82
-				nvram_set pa0b2 0xfe66
-				nvram_set pa0maxpwr 0x4e
-			}
-		fi
-	;;
-	"1127") #0x467
-		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-		[ "$COMMIT" = 1 ] && {
-			nvram_set sdram_config 0x0062
-			nvram_set sdram_ncdl 0x0
-			nvram_set pa0itssit 62
-			nvram_set pa0b0 0x168b
-			nvram_set pa0b1 0xfabf
-			nvram_set pa0b2 0xfeaf
-			nvram_set pa0maxpwr 0x4e
-		}
-	;;
-esac
-[ "$COMMIT" = "1" ] && nvram commit
-
-# hack for some motorola routers
-nvram unset wl0gpio0
-
-[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-	# if default wifi mac, set two higher than the lan mac
-	nvram set il0macaddr=$(nvram get et0macaddr|
-	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-}
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
deleted file mode 100755
index 6a626f54a5..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-[ -e /etc/config/network ] && exit 0
-
-mkdir -p /etc/config
-
-(
-	if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
-		# WGT634u
-		echo boardtype=wgt634u
-	else
-		strings /dev/mtdblock/3
-	fi
-) | awk '
-function p(name) {
-	if (c[name] != "") print name "=\"" c[name] "\""
-}
-
-BEGIN {
-	FS="="
-	c["lan_ifname"]="br0"
-	c["lan_ifnames"]="vlan0 eth1"
-	c["wan_proto"]="none"
-	c["wan_ifname"]="vlan1"
-	c["vlan0ports"]="1 2 3 4 5*"
-	c["vlan1ports"]="0 5"
-}
-
-($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
-	nvram[$1] = $2
-}
-
-END {
-	# v1 hardware
-	if (nvram["boardtype"] == "bcm94710dev") {
-		# Linksys WRT54G v1.x
-		if (nvram["boardnum"] == "42") {
-			c["vlan0ports"]=""
-			c["vlan1ports"]=""
-			c["lan_ifnames"]="vlan2 eth2"
-		}
-
-		# Asus WL-500g
-		if (nvram["boardnum"] == "asusX") {
-			c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
-			# wan_ifname=eth1
-		}
-	}
-	if (nvram["boardtype"] == "wgt634u") {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-		c["lan_ifnames"] = "vlan0 ath0"
-	}
-	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
-		c["vlan0ports"] = "0 1 2 3 5*"
-		c["vlan1ports"] = "4 5"
-	}
-
-	# WAP54G
-	if ((nvram["boardnum"] == "2") || \
-		(nvram["boardnum"] == "1024")) {
-		c["lan_ifnames"]="eth0 eth1"
-		c["wan_ifname"]=""
-	}
-
-	print "#### VLAN configuration "
-	print "vlan0hwname=et0"
-	print "vlan1hwname=et0"
-	p("vlan0ports")
-	p("vlan1ports")
-	print ""
-	print ""
-	
-	print "#### LAN configuration"
-	print "lan_proto=\"static\""
-	p("lan_ifname")
-	p("lan_ifnames")
-	print "lan_ipaddr=\"192.168.1.1\""
-	print "lan_netmask=\"255.255.255.0\""
-	print "# lan_dns=\"192.168.1.1\""
-	print "# lan_gateway=\"192.168.1.1\""
-
-	print ""
-	print ""
-
-	print "#### WAN configuration"
-	print "# wan_proto: WAN protocol, available protocols:"
-	print "#   none: disable"
-	print "#   dhcp: DHCP"
-	print "#   static: Static IP"
-	print "#   pppoe: PPP over Ethernet"
-	print "#   pptp: Point-to-Point tunneling Protocol"
-	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
-	print ""
-	print "wan_proto=dhcp"
-	p("wan_ifname")
-	print "wan_device=\"" c["wan_ifname"] "\""
-	print "# wan_ipaddr=\"192.168.0.2\""
-	print "# wan_netmask=\"255.255.255.0\""
-	print "# wan_gateway=\"192.168.0.1\""
-	print "# wan_dns=\"192.168.0.1\""
-	print ""
-	print "## PPP over Ethernet and PPTP"
-	print "# wan_ifname=\"ppp0\""
-	print "# ppp_username=\"my_username\""
-	print "# ppp_passwd=\"my_password\""
-	print "# pptp_server_ip=\"192.168.0.1\""
-}
-' > /etc/config/network