1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
|
From ff31834cfaac386f94ddd65fab8b87d090c69bcc Mon Sep 17 00:00:00 2001
From: Mike Westerhof <mwester@dls.net>
Date: Thu, 13 Nov 2008 20:38:35 +0000
Subject: [PATCH] fix-gta01-s3c-mci-stop-clock-when-idle.patch
This patch, based on the work done by Andy Green for the Glamo mci
driver, makes sure that the SD clock only runs during data transfers.
This can be overridden on the kernel command line if desired. Also
added is the ability for the maximum SD clock speed to be limited.
Signed-off-by: Mike Westerhof (mwester@dls.net)
---
drivers/mmc/host/s3cmci.c | 113 +++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 109 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index edba055..8f88721 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -15,6 +15,8 @@
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
#include <asm/dma.h>
#include <asm/dma-mapping.h>
@@ -29,6 +31,37 @@
#define DRIVER_NAME "s3c-mci"
+static spinlock_t clock_lock;
+
+/*
+ * Max SD clock rate (in Hz)
+ *
+ * you can override this on the kernel command line using
+ *
+ * s3cmci.sd_max_clk=10000000
+ *
+ * for example.
+ */
+
+static int sd_max_clk = 25000000;
+module_param(sd_max_clk, int, 0644);
+
+/*
+ * SD allow SD clock to run while idle
+ *
+ * you can override this on kernel commandline using
+ *
+ * s3cmci.sd_idleclk=0
+ *
+ * for example.
+ */
+
+static int sd_idleclk; /* disallow idle clock by default */
+module_param(sd_idleclk, int, 0644);
+
+/* used to stash real idleclk state in suspend: we force it to run in there */
+static int suspend_sd_idleclk;
+
enum dbg_channels {
dbg_err = (1 << 0),
dbg_debug = (1 << 1),
@@ -368,6 +401,40 @@ static void pio_tasklet(unsigned long data)
enable_irq(host->irq);
}
+static void __s3cmci_enable_clock(struct s3cmci_host *host)
+{
+ u32 mci_con;
+ unsigned long flags;
+
+ /* enable the clock if clock rate is > 0 */
+ if (host->real_rate) {
+ spin_lock_irqsave(&clock_lock, flags);
+
+ mci_con = readl(host->base + S3C2410_SDICON);
+ mci_con |= S3C2410_SDICON_CLOCKTYPE;
+ writel(mci_con, host->base + S3C2410_SDICON);
+
+ spin_unlock_irqrestore(&clock_lock, flags);
+ }
+}
+
+static void __s3cmci_disable_clock(struct s3cmci_host *host)
+{
+ u32 mci_con;
+ unsigned long flags;
+
+ if (!sd_idleclk) {
+ spin_lock_irqsave(&clock_lock, flags);
+
+ mci_con = readl(host->base + S3C2410_SDICON);
+ mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
+ writel(mci_con, host->base + S3C2410_SDICON);
+
+ spin_unlock_irqrestore(&clock_lock, flags);
+ }
+}
+
+
/*
* ISR for SDI Interface IRQ
* Communication between driver and ISR works as follows:
@@ -749,6 +816,7 @@ static void finalize_request(struct s3cmci_host *host)
}
request_done:
+ __s3cmci_disable_clock(host);
host->complete_what = COMPLETION_NONE;
host->mrq = NULL;
mmc_request_done(host->mmc, mrq);
@@ -1005,6 +1073,7 @@ static void s3cmci_send_request(struct mmc_host *mmc)
}
+ __s3cmci_enable_clock(host);
s3cmci_send_command(host, cmd);
enable_irq(host->irq);
}
@@ -1087,14 +1156,30 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if ((ios->power_mode == MMC_POWER_ON)
|| (ios->power_mode == MMC_POWER_UP)) {
- dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
- host->real_rate/1000, ios->clock/1000);
+ dbg(host, dbg_conf,
+ "powered (vdd: %d), clk: %lukHz div=%lu (req: %ukHz),"
+ " bus width: %d\n", ios->vdd, host->real_rate / 1000,
+ host->clk_div * (host->prescaler + 1),
+ ios->clock / 1000, ios->bus_width);
+
+ /* After power-up, we need to give the card 74 clocks to
+ * initialize, so sleep just a moment before we disable
+ * the clock again.
+ */
+ if (ios->clock)
+ msleep(1);
+
} else {
dbg(host, dbg_conf, "powered down.\n");
}
host->bus_width = ios->bus_width;
+ /* No need to run the clock until we have data to move */
+ if (!sd_idleclk) {
+ __s3cmci_disable_clock(host);
+ dbg(host, dbg_conf, "SD clock disabled when idle.\n");
+ }
}
static void s3cmci_reset(struct s3cmci_host *host)
@@ -1267,7 +1352,7 @@ static int s3cmci_probe(struct platform_device *pdev, int is2440)
mmc->ocr_avail = host->pdata->ocr_avail;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
mmc->f_min = host->clk_rate / (host->clk_div * 256);
- mmc->f_max = host->clk_rate / host->clk_div;
+ mmc->f_max = sd_max_clk;
mmc->max_blk_count = 4095;
mmc->max_blk_size = 4095;
@@ -1354,14 +1439,33 @@ static int s3cmci_probe_2440(struct platform_device *dev)
static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct s3cmci_host *host = mmc_priv(mmc);
+ int ret;
+
+ /* Ensure clock is running so it will be running on resume */
+ __s3cmci_enable_clock(host);
- return mmc_suspend_host(mmc, state);
+ /* We will do more commands, make sure the clock stays running,
+ * and save our state so that we can restore it on resume.
+ */
+ suspend_sd_idleclk = sd_idleclk;
+ sd_idleclk = 1;
+
+ ret = mmc_suspend_host(mmc, state);
+
+ /* so that when we resume, we use any modified max rate */
+ mmc->f_max = sd_max_clk;
+
+ return ret;
}
static int s3cmci_resume(struct platform_device *dev)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
+ /* Put the sd_idleclk state back to what it was */
+ sd_idleclk = suspend_sd_idleclk;
+
return mmc_resume_host(mmc);
}
@@ -1398,6 +1502,7 @@ static struct platform_driver s3cmci_driver_2440 = {
static int __init s3cmci_init(void)
{
+ spin_lock_init(&clock_lock);
platform_driver_register(&s3cmci_driver_2410);
platform_driver_register(&s3cmci_driver_2412);
platform_driver_register(&s3cmci_driver_2440);
--
1.5.6.5
|
