1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
From 3924996bab2845bdf9a9d16ff7c20445de1ab55d Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Thu, 21 Oct 2010 15:48:33 -0400
Subject: [PATCH] [ARM] Kirkwood: restrict the scope of the PCIe reset workaround
Commit 21f0ba90a447 "orion/kirkwood: reset PCIe unit on boot" made the
reset of the PCIe unit unconditional. While this may fix problems on some
targets, this also causes problems on other targets.
Saeed Bishara <saeed@marvell.com> said about the original problem: "We
couln't pinpoint the root cause of this issue, actually we failed to
reproduce that issue."
So let's restrict the reset of the PCIe unit only to the target where
the original problem was observed.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
arch/arm/mach-kirkwood/ts41x-setup.c | 14 +++++++++++++-
arch/arm/plat-orion/include/plat/pcie.h | 3 +++
arch/arm/plat-orion/pcie.c | 5 -----
3 files changed, 16 insertions(+), 6 deletions(-)
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -27,6 +27,10 @@
#include "mpp.h"
#include "tsx1x-common.h"
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
#define QNAP_TS41X_JUMPER_JP1 45
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
static int __init ts41x_pci_init(void)
{
- if (machine_is_ts41x())
+ if (machine_is_ts41x()) {
+ /*
+ * Without this explicit reset, the PCIe SATA controller
+ * (Marvell 88sx7042/sata_mv) is known to stop working
+ * after a few minutes.
+ */
+ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
kirkwood_pcie_init(KW_PCIE0);
+ }
return 0;
}
--- a/arch/arm/plat-orion/include/plat/pcie.h
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -11,12 +11,15 @@
#ifndef __PLAT_PCIE_H
#define __PLAT_PCIE_H
+struct pci_bus;
+
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
int orion_pcie_link_up(void __iomem *base);
int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
void orion_pcie_setup(void __iomem *base,
struct mbus_dram_target_info *dram);
int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -182,11 +182,6 @@ void __init orion_pcie_setup(void __iome
u32 mask;
/*
- * soft reset PCIe unit
- */
- orion_pcie_reset(base);
-
- /*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
orion_pcie_setup_wins(base, dram);
|
