path: root/target/linux/brcm47xx/patches-2.6.39/022-USB-Add-ehci-ssb-driver.patch

--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -215,6 +215,19 @@ config USB_OXU210HP_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called oxu210hp-hcd.
 
+config USB_EHCI_HCD_SSB
+	bool "EHCI support for Broadcom SSB EHCI core"
+	depends on USB_EHCI_HCD && (SSB = y || SSB = USB_EHCI_HCD) && EXPERIMENTAL
+	default n
+	---help---
+	  Support for the Sonics Silicon Backplane (SSB) attached
+	  Broadcom USB EHCI core.
+
+	  This device is present in some embedded devices with
+	  Broadcom based SSB bus.
+
+	  If unsure, say N.
+
 config USB_ISP116X_HCD
 	tristate "ISP116X HCD support"
 	depends on USB
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1267,9 +1267,14 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		tegra_ehci_driver
 #endif
 
+#ifdef CONFIG_USB_EHCI_HCD_SSB
+#include "ehci-ssb.c"
+#define SSB_EHCI_DRIVER		ssb_ehci_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-    !defined(XILINX_OF_PLATFORM_DRIVER)
+    !defined(XILINX_OF_PLATFORM_DRIVER) && !defined(SSB_EHCI_DRIVER)
 #error "missing bus glue for ehci-hcd"
 #endif
 
@@ -1329,10 +1334,20 @@ static int __init ehci_hcd_init(void)
 	if (retval < 0)
 		goto clean4;
 #endif
+
+#ifdef SSB_EHCI_DRIVER
+	retval = ssb_driver_register(&SSB_EHCI_DRIVER);
+	if (retval < 0)
+		goto clean5;
+#endif
 	return retval;
 
+#ifdef SSB_EHCI_DRIVER
+	/* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
+clean5:
+#endif
 #ifdef XILINX_OF_PLATFORM_DRIVER
-	/* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */
+	platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
 clean4:
 #endif
 #ifdef OF_PLATFORM_DRIVER
@@ -1363,6 +1378,9 @@ module_init(ehci_hcd_init);
 
 static void __exit ehci_hcd_cleanup(void)
 {
+#ifdef SSB_EHCI_DRIVER
+	ssb_driver_unregister(&SSB_EHCI_DRIVER);
+#endif
 #ifdef XILINX_OF_PLATFORM_DRIVER
 	platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
 #endif
--- /dev/null
+++ b/drivers/usb/host/ehci-ssb.c
@@ -0,0 +1,255 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core EHCI driver (SSB bus glue)
+ *
+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
+ * Copyright 2010 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Derived from the OHCI-SSB driver
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ *
+ * Derived from the EHCI-PCI driver
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+
+
+struct ssb_ehci_device {
+	struct ehci_hcd ehci; /* _must_ be at the beginning. */
+};
+
+static inline
+struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd)
+{
+	return (struct ssb_ehci_device *)(hcd->hcd_priv);
+}
+
+static int ssb_ehci_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int err;
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	err = ehci_halt(ehci);
+
+	if (err)
+		return err;
+
+	err = ehci_init(hcd);
+
+	if (err)
+		return err;
+
+	ehci_reset(ehci);
+
+	return err;
+}
+
+static const struct hc_driver ssb_ehci_hc_driver = {
+	.description		= "ssb-usb-ehci",
+	.product_desc		= "SSB EHCI Controller",
+	.hcd_priv_size		= sizeof(struct ssb_ehci_device),
+
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	.reset			= ssb_ehci_reset,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	.get_frame_number	= ehci_get_frame,
+
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#if defined(CONFIG_PM)
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static void ssb_ehci_detach(struct ssb_device *dev)
+{
+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	ssb_device_disable(dev, 0);
+}
+
+static int ssb_ehci_attach(struct ssb_device *dev)
+{
+	struct ssb_ehci_device *ehcidev;
+	struct usb_hcd *hcd;
+	int err = -ENOMEM;
+	u32 tmp;
+
+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	/*
+	 * USB 2.0 special considerations:
+	 *
+	 * In addition to the standard SSB reset sequence, the Host Control
+	 * Register must be programmed to bring the USB core and various phy
+	 * components out of reset.
+	 */
+	ssb_device_enable(dev, 0);
+	ssb_write32(dev, 0x200, 0x7ff);
+
+	/* Change Flush control reg */
+	tmp = ssb_read32(dev, 0x400);
+	tmp &= ~8;
+	ssb_write32(dev, 0x400, tmp);
+	tmp = ssb_read32(dev, 0x400);
+
+	/* Change Shim control reg */
+	tmp = ssb_read32(dev, 0x304);
+	tmp &= ~0x100;
+	ssb_write32(dev, 0x304, tmp);
+	tmp = ssb_read32(dev, 0x304);
+
+	udelay(1);
+
+	/* Work around for 5354 failures */
+	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+		/* Change syn01 reg */
+		tmp = 0x00fe00fe;
+		ssb_write32(dev, 0x894, tmp);
+
+		/* Change syn03 reg */
+		tmp = ssb_read32(dev, 0x89c);
+		tmp |= 0x1;
+		ssb_write32(dev, 0x89c, tmp);
+	}
+
+	hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
+			     dev_name(dev->dev));
+	if (!hcd)
+		goto err_dev_disable;
+
+	ehcidev = hcd_to_ssb_ehci(hcd);
+	tmp = ssb_read32(dev, SSB_ADMATCH0);
+	hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
+	hcd->rsrc_len = 0x100; /* ehci reg block size */
+	/*
+	 * start & size modified per sbutils.c
+	 */
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs)
+		goto err_put_hcd;
+	err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
+	if (err)
+		goto err_iounmap;
+
+	ssb_set_drvdata(dev, hcd);
+
+	return err;
+
+err_iounmap:
+	iounmap(hcd->regs);
+err_put_hcd:
+	usb_put_hcd(hcd);
+err_dev_disable:
+	ssb_device_disable(dev, 0);
+	return err;
+}
+
+static int ssb_ehci_probe(struct ssb_device *dev,
+		const struct ssb_device_id *id)
+{
+	int err;
+	u16 chipid_top;
+
+	/* USBcores are only connected on embedded devices. */
+	chipid_top = (dev->bus->chip_id & 0xFF00);
+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
+		return -ENODEV;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	err = ssb_ehci_attach(dev);
+
+	return err;
+}
+
+static void ssb_ehci_remove(struct ssb_device *dev)
+{
+	ssb_ehci_detach(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_ehci_suspend(struct ssb_device *dev, pm_message_t state)
+{
+	ssb_device_disable(dev, 0);
+
+	return 0;
+}
+
+static int ssb_ehci_resume(struct ssb_device *dev)
+{
+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
+	struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
+
+	ssb_device_enable(dev, 0);
+
+	ehci_finish_controller_resume(hcd);
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_ehci_suspend	NULL
+#define ssb_ehci_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_ehci_table[] = {
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+	SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
+
+static struct ssb_driver ssb_ehci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= ssb_ehci_table,
+	.probe		= ssb_ehci_probe,
+	.remove		= ssb_ehci_remove,
+	.suspend	= ssb_ehci_suspend,
+	.resume		= ssb_ehci_resume,
+};