1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
|
/*
* Broadcom SiliconBackplane hardware register definitions.
*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
*/
#ifndef _SBCONFIG_H
#define _SBCONFIG_H
#include "linuxver.h"
/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define _PADLINE(line) pad ## line
#define _XSTR(line) _PADLINE(line)
#define PAD _XSTR(__LINE__)
#endif
/*
* SiliconBackplane Address Map.
* All regions may not exist on all chips.
*/
#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */
#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */
#define SB_PCI_MEM_SZ (64 * 1024 * 1024)
#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */
#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */
#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */
#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */
#define SB_ARMCM3_ROM 0x1e000000 /* ARM Cortex-M3 ROM */
#define SB_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
#define SB_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
#define SB_ARM7S_ROM 0x20000000 /* ARM7TDMI-S ROM */
#define SB_ARMCM3_SRAM2 0x60000000 /* ARM Cortex-M3 SRAM Region 2 */
#define SB_ARM7S_SRAM2 0x80000000 /* ARM7TDMI-S SRAM Region 2 */
#define SB_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */
#define SB_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */
#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */
#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */
#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2
* (2 ZettaBytes), low 32 bits
*/
#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2
* (2 ZettaBytes), high 32 bits
*/
#define SB_EUART (SB_EXTIF_BASE + 0x00800000)
#define SB_LED (SB_EXTIF_BASE + 0x00900000)
/* enumeration space related defs */
#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */
#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
#define SB_MAXFUNCS 4 /* max. # functions per core */
#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */
#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */
/* mips address */
#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
/*
* Sonics Configuration Space Registers.
*/
#define SBIPSFLAG 0x08
#define SBTPSFLAG 0x18
#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */
#define SBTMERRLOG 0x50 /* sonics >= 2.3 */
#define SBADMATCH3 0x60
#define SBADMATCH2 0x68
#define SBADMATCH1 0x70
#define SBIMSTATE 0x90
#define SBINTVEC 0x94
#define SBTMSTATELOW 0x98
#define SBTMSTATEHIGH 0x9c
#define SBBWA0 0xa0
#define SBIMCONFIGLOW 0xa8
#define SBIMCONFIGHIGH 0xac
#define SBADMATCH0 0xb0
#define SBTMCONFIGLOW 0xb8
#define SBTMCONFIGHIGH 0xbc
#define SBBCONFIG 0xc0
#define SBBSTATE 0xc8
#define SBACTCNFG 0xd8
#define SBFLAGST 0xe8
#define SBIDLOW 0xf8
#define SBIDHIGH 0xfc
/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
* a few registers *below* that line. I think it would be very confusing to try
* and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
*/
#define SBIMERRLOGA 0xea8
#define SBIMERRLOG 0xeb0
#define SBTMPORTCONNID0 0xed8
#define SBTMPORTLOCK0 0xef8
#ifndef _LANGUAGE_ASSEMBLY
typedef volatile struct _sbconfig {
uint32 PAD[2];
uint32 sbipsflag; /* initiator port ocp slave flag */
uint32 PAD[3];
uint32 sbtpsflag; /* target port ocp slave flag */
uint32 PAD[11];
uint32 sbtmerrloga; /* (sonics >= 2.3) */
uint32 PAD;
uint32 sbtmerrlog; /* (sonics >= 2.3) */
uint32 PAD[3];
uint32 sbadmatch3; /* address match3 */
uint32 PAD;
uint32 sbadmatch2; /* address match2 */
uint32 PAD;
uint32 sbadmatch1; /* address match1 */
uint32 PAD[7];
uint32 sbimstate; /* initiator agent state */
uint32 sbintvec; /* interrupt mask */
uint32 sbtmstatelow; /* target state */
uint32 sbtmstatehigh; /* target state */
uint32 sbbwa0; /* bandwidth allocation table0 */
uint32 PAD;
uint32 sbimconfiglow; /* initiator configuration */
uint32 sbimconfighigh; /* initiator configuration */
uint32 sbadmatch0; /* address match0 */
uint32 PAD;
uint32 sbtmconfiglow; /* target configuration */
uint32 sbtmconfighigh; /* target configuration */
uint32 sbbconfig; /* broadcast configuration */
uint32 PAD;
uint32 sbbstate; /* broadcast state */
uint32 PAD[3];
uint32 sbactcnfg; /* activate configuration */
uint32 PAD[3];
uint32 sbflagst; /* current sbflags */
uint32 PAD[3];
uint32 sbidlow; /* identification */
uint32 sbidhigh; /* identification */
} sbconfig_t;
#endif /* _LANGUAGE_ASSEMBLY */
/* sbipsflag */
#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */
#define SBIPS_INT1_SHIFT 0
#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */
#define SBIPS_INT2_SHIFT 8
#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */
#define SBIPS_INT3_SHIFT 16
#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */
#define SBIPS_INT4_SHIFT 24
/* sbtpsflag */
#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */
#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */
/* sbtmerrlog */
#define SBTMEL_CM 0x00000007 /* command */
#define SBTMEL_CI 0x0000ff00 /* connection id */
#define SBTMEL_EC 0x0f000000 /* error code */
#define SBTMEL_ME 0x80000000 /* multiple error */
/* sbimstate */
#define SBIM_PC 0xf /* pipecount */
#define SBIM_AP_MASK 0x30 /* arbitration policy */
#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */
#define SBIM_AP_TS 0x10 /* use timesliaces only */
#define SBIM_AP_TK 0x20 /* use token only */
#define SBIM_AP_RSV 0x30 /* reserved */
#define SBIM_IBE 0x20000 /* inbanderror */
#define SBIM_TO 0x40000 /* timeout */
#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */
#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */
/* sbtmstatelow */
#define SBTML_RESET 0x1 /* reset */
#define SBTML_REJ_MASK 0x6 /* reject */
#define SBTML_REJ_SHIFT 1
#define SBTML_CLK 0x10000 /* clock enable */
#define SBTML_FGC 0x20000 /* force gated clocks on */
#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */
#define SBTML_PE 0x40000000 /* pme enable */
#define SBTML_BE 0x80000000 /* bist enable */
/* sbtmstatehigh */
#define SBTMH_SERR 0x1 /* serror */
#define SBTMH_INT 0x2 /* interrupt */
#define SBTMH_BUSY 0x4 /* busy */
#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */
#define SBTMH_FL_MASK 0x0fff0000 /* core-specific flags */
#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */
#define SBTMH_GCR 0x20000000 /* gated clock request */
#define SBTMH_BISTF 0x40000000 /* bist failed */
#define SBTMH_BISTD 0x80000000 /* bist done */
/* sbbwa0 */
#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */
#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */
#define SBBWA_TAB1_SHIFT 16
/* sbimconfiglow */
#define SBIMCL_STO_MASK 0x7 /* service timeout */
#define SBIMCL_RTO_MASK 0x70 /* request timeout */
#define SBIMCL_RTO_SHIFT 4
#define SBIMCL_CID_MASK 0xff0000 /* connection id */
#define SBIMCL_CID_SHIFT 16
/* sbimconfighigh */
#define SBIMCH_IEM_MASK 0xc /* inband error mode */
#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */
#define SBIMCH_TEM_SHIFT 4
#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */
#define SBIMCH_BEM_SHIFT 6
/* sbadmatch0 */
#define SBAM_TYPE_MASK 0x3 /* address type */
#define SBAM_AD64 0x4 /* reserved */
#define SBAM_ADINT0_MASK 0xf8 /* type0 size */
#define SBAM_ADINT0_SHIFT 3
#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */
#define SBAM_ADINT1_SHIFT 3
#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */
#define SBAM_ADINT2_SHIFT 3
#define SBAM_ADEN 0x400 /* enable */
#define SBAM_ADNEG 0x800 /* negative decode */
#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */
#define SBAM_BASE0_SHIFT 8
#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */
#define SBAM_BASE1_SHIFT 12
#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */
#define SBAM_BASE2_SHIFT 16
/* sbtmconfiglow */
#define SBTMCL_CD_MASK 0xff /* clock divide */
#define SBTMCL_CO_MASK 0xf800 /* clock offset */
#define SBTMCL_CO_SHIFT 11
#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */
#define SBTMCL_IF_SHIFT 18
#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */
#define SBTMCL_IM_SHIFT 24
/* sbtmconfighigh */
#define SBTMCH_BM_MASK 0x3 /* busy mode */
#define SBTMCH_RM_MASK 0x3 /* retry mode */
#define SBTMCH_RM_SHIFT 2
#define SBTMCH_SM_MASK 0x30 /* stop mode */
#define SBTMCH_SM_SHIFT 4
#define SBTMCH_EM_MASK 0x300 /* sb error mode */
#define SBTMCH_EM_SHIFT 8
#define SBTMCH_IM_MASK 0xc00 /* int mode */
#define SBTMCH_IM_SHIFT 10
/* sbbconfig */
#define SBBC_LAT_MASK 0x3 /* sb latency */
#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */
#define SBBC_MAX0_SHIFT 16
#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */
#define SBBC_MAX1_SHIFT 20
/* sbbstate */
#define SBBS_SRD 0x1 /* st reg disable */
#define SBBS_HRD 0x2 /* hold reg disable */
/* sbidlow */
#define SBIDL_CS_MASK 0x3 /* config space */
#define SBIDL_AR_MASK 0x38 /* # address ranges supported */
#define SBIDL_AR_SHIFT 3
#define SBIDL_SYNCH 0x40 /* sync */
#define SBIDL_INIT 0x80 /* initiator */
#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */
#define SBIDL_MINLAT_SHIFT 8
#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */
#define SBIDL_MAXLAT_SHIFT 12
#define SBIDL_FIRST 0x10000 /* this initiator is first */
#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */
#define SBIDL_CW_SHIFT 18
#define SBIDL_TP_MASK 0xf00000 /* target ports */
#define SBIDL_TP_SHIFT 20
#define SBIDL_IP_MASK 0xf000000 /* initiator ports */
#define SBIDL_IP_SHIFT 24
#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */
#define SBIDL_RV_SHIFT 28
#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */
#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */
/* sbidhigh */
#define SBIDH_RC_MASK 0x000f /* revision code */
#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */
#define SBIDH_RCE_SHIFT 8
#define SBCOREREV(sbidh) \
((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
#define SBIDH_CC_MASK 0x8ff0 /* core code */
#define SBIDH_CC_SHIFT 4
#define SBIDH_VC_MASK 0xffff0000 /* vendor code */
#define SBIDH_VC_SHIFT 16
#define SB_COMMIT 0xfd8 /* update buffered registers value */
/* vendor codes */
#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */
/* core codes */
#define SB_NODEV 0x700 /* Invalid coreid */
#define SB_CC 0x800 /* chipcommon core */
#define SB_ILINE20 0x801 /* iline20 core */
#define SB_SDRAM 0x803 /* sdram core */
#define SB_PCI 0x804 /* pci core */
#define SB_MIPS 0x805 /* mips core */
#define SB_ENET 0x806 /* enet mac core */
#define SB_CODEC 0x807 /* v90 codec core */
#define SB_USB 0x808 /* usb 1.1 host/device core */
#define SB_ADSL 0x809 /* ADSL core */
#define SB_ILINE100 0x80a /* iline100 core */
#define SB_IPSEC 0x80b /* ipsec core */
#define SB_PCMCIA 0x80d /* pcmcia core */
#define SB_SOCRAM 0x80e /* internal memory core */
#define SB_MEMC 0x80f /* memc sdram core */
#define SB_EXTIF 0x811 /* external interface core */
#define SB_D11 0x812 /* 802.11 MAC core */
#define SB_MIPS33 0x816 /* mips3302 core */
#define SB_USB11H 0x817 /* usb 1.1 host core */
#define SB_USB11D 0x818 /* usb 1.1 device core */
#define SB_USB20H 0x819 /* usb 2.0 host core */
#define SB_USB20D 0x81a /* usb 2.0 device core */
#define SB_SDIOH 0x81b /* sdio host core */
#define SB_ROBO 0x81c /* roboswitch core */
#define SB_ATA100 0x81d /* parallel ATA core */
#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */
#define SB_GIGETH 0x81f /* gigabit ethernet core */
#define SB_PCIE 0x820 /* pci express core */
#define SB_MIMO 0x821 /* MIMO phy core */
#define SB_SRAMC 0x822 /* SRAM controller core */
#define SB_MINIMAC 0x823 /* MINI MAC/phy core */
#define SB_ARM7S 0x825 /* ARM7tdmi-s core */
#define SB_SDIOD 0x829 /* SDIO device core */
#define SB_ARMCM3 0x82a /* ARM Cortex M3 core */
#define SB_OCP 0x830 /* OCP2OCP bridge core */
#define SB_SC 0x831 /* shared common core */
#define SB_AHB 0x832 /* OCP2AHB bridge core */
#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */
/* Not an enumeration space register, but common to all cores to
* communicate w/PMU regarding Silicon Backplane clocking.
*/
#define SB_CLK_CTL_ST 0x1e0 /* clock control and status */
/* clk_ctl_st register */
#define CCS_FORCEALP 0x00000001 /* force ALP request */
#define CCS_FORCEHT 0x00000002 /* force HT request */
#define CCS_FORCEILP 0x00000004 /* force ILP request */
#define CCS_ALPAREQ 0x00000008 /* ALP Avail Request */
#define CCS_HTAREQ 0x00000010 /* HT Avail Request */
#define CCS_FORCEHWREQOFF 0x00000020 /* Force HW Clock Request Off */
#define CCS_ALPAVAIL 0x00010000 /* ALP is available */
#define CCS_HTAVAIL 0x00020000 /* HT is available */
#define CCS0_HTAVAIL 0x00010000 /* HT avail in chipc and pcmcia on 4328a0 */
#define CCS0_ALPAVAIL 0x00020000 /* ALP avail in chipc and pcmcia on 4328a0 */
/* Not really related to Silicon Backplane, but a couple of software
* conventions for the use the flash space:
*/
/* Minumum amount of flash we support */
#define FLASH_MIN 0x00020000 /* Minimum flash size */
/* A boot/binary may have an embedded block that describes its size */
#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */
#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */
#define BISZ_MAGIC_IDX 0 /* Word 0: magic */
#define BISZ_TXTST_IDX 1 /* 1: text start */
#define BISZ_TXTEND_IDX 2 /* 2: text end */
#define BISZ_DATAST_IDX 3 /* 3: data start */
#define BISZ_DATAEND_IDX 4 /* 4: data end */
#define BISZ_BSSST_IDX 5 /* 5: bss start */
#define BISZ_BSSEND_IDX 6 /* 6: bss end */
#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */
#endif /* _SBCONFIG_H */
|
