summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2014-04-19imx6-gateworks: enable new canbus packagesluka
The canbus package was recently changed to a more active project. This patch updates the default package names to include the same functionality as before. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-16lantiq: ARV7519RW22: several fixesblogic
- Fix ethernet ports. - Clean DTS files. - WiFi is lantiq based (not supported yet), remove ath9k. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-14sunxi: remove mainlined patcheswigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: rb91x: fix ethernet packet loss issuesjuhosg
The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx/mikrotik: enable the AT803x PHY driverjuhosg
It will be used on the RB91x boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: allow to configure AR803x PHYs via platform datajuhosg
Add a patch for the at803x phy driver, in order to be able to configure some register settings via platform data. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: add phy_mmd_{read,write} helpersjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: enable console on the RB91x boardsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ralink: add port_init for rt2880blogic
Forgotten patch to fix ethernet for rt2880. Based on previously submitted patch from Claudio. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: add profile and build image for the ZyXEL NBG6716 boardjuhosg
Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: remove the non-existing zyxelnand subtarget specific stuff] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: add user-space support for the ZyXEL NBG6716 boardjuhosg
Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-13ar71xx: add kernel support for ZyXEL NBG 6716juhosg
With this patch OpenWRT supports the following on the ZyXEL NBG 6716: -WiFi 2G (ath9k) -WiFi 5G (ath10k) -NAND flash -2 Ethernet interfaces -USB 2.0 -LEDs including switch -reasonale defaults at first boot Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: - rename and refresh kernel patch, - fix a few typos, - change button key codes, - use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12lantiq: enable switch on td8970blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12Fix ARV7519RW imagesblogic
This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12Fix Asus rt-n15 board supportblogic
* gpio leds and buttons * ethernet Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40494 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12rt2880 DT fixesblogic
* add pinctrl * fix ethernet port * make wifi available by default Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12Fix pinmux-rt2880blogic
The last arg to FUNC() is count, not last pin. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12Add wmac clock for rt2880blogic
Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12Don't try to generate whr-g300n image if it's going to be more than 4Mblogic
Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: build firmware image for the WNDR3700 v4 boardjuhosg
Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx/image: allow to use more arguments for some macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support filesjuhosg
Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300 is the same device. Indicate this in the kernel files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: enable 5V power for the USB portjuhosg
The 5V power of the USB is controlled by a GPIO pin of the external WiFi chip. Setup the GPIO bitmasks in the platform data of the WiFi chip to ensure that the 5V power gets enabled by the ath9k driver. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: use KEY_RFKILL code for the Wireless buttonjuhosg
Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: add default LED config for WiFi LEDs on the WNDR4300juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: add LED for 2.4Ghz wifi interfacejuhosg
Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOsjuhosg
The bootloader does not initializes the output function correctly for all LEDs. DO that from the board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: wndr4300: change 'orange' to 'amber' in LED color namesjuhosg
The hardware manual says amber so change the color part of the LED names to reflect that. Also update the constant names. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: fix typos in TP-Link rssileds definitionjuhosg
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5109/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: add rssileds for Ubiquiti XM boardsjuhosg
Adds support for the received signal strength indicator LEDs of the Bullet M, Nanostation M and Rocket M devices. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5108/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12x86/net5501: remove broken flagjuhosg
According to Christophe, the kernel boots on the Soekris net5501 board. Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12kernel: update 3.10 to 3.10.36juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: fix image generationjuhosg
Move the comments out from the shell script to fix build breakage introduced in r40464. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: avoid spurious restarts caused by the watchdog on AR934xjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: add comments for image Makefile.juhosg
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5075/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12ar71xx: initial support for TP-Link Archer C7v2juhosg
The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver. The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1. Signed-off-by: Adam Serbinski <adam@serbinski.com> Patchwork: http://patchwork.openwrt.org/patch/5071/ [juhosg: - remove the v2 specific profile add the ath10k driver to the existing Archer C7 profile instead. Although on v1 devices it does not change the non-working behaviour, but the ath10k driver is useful for users whom have replaced the wifi card with a supported one in their units. - update image/Makefile to build firmware image for both boards if the Archer C7 profile is selected] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11brcm2708: add missing configuration symbolsflorian
Spotted by buildbot and while doing a CONFIG_ALL=y build. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11lantiq: add an extra partition to the TDW8970 flash that can be used to ↵blogic
store the vdsl firmware Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11lantiq: more vdsl related cleanupsblogic
* atm module needs to be loaded before linux-atm * use absolute firmware paths * extended validation * add a script for mounting an optional firmware partition Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11x86_64: add usb support (including storage) to the kernel confignbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11x86: set default kernel version to 3.10nbd
Place the previous selection (3.3.8) into the only subtarget that did not override it to 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11x86: remove linux 3.8 supportnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11[x86_64]: generate esxi compatible vmdks, tookaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-11[x86_64]: reuqire qemu-img to be installed (the one we have in tools is too old)kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-10generic: remove obsolete symbol export from block2mtd init patchnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-10x86: try harder to attach block2mtd to fix boot issues on devices with ↵nbd
longer delays Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-10[x86_64]: specify the adapter type for the vmdk conversionkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-10lantiq: move the dsl-modem config to network.@dsl-modem[-1]blogic
make sure uci_defaults generates a proper uci config for the v/adsl modem Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-09lantiq: make dsl_notify.sh executableblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-09[x86_64]: enable native KVM and VMware driverskaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40434 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-24 03:30:15 +0000