summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2014-02-23x86/olpc: add config for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/net5501: remove old kernel configjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/net5501: switch to 3.10 and add broken flagjuhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/net5501: add config for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23brcm47xx: b44: start the phyhauke
We did not start the PHY when an external phy was in use. Without this patch the driver uses half duplex mode and the switch uses full duplex mode, which causes problems. Thank you fback for spotting this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23brcm47xx: fix detection of some Linksys WRT54G* deviceshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/thincan: remove old kernel configjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/thincan: switch to 3.10 and add broken flagjuhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/thincan: add config for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/xen_domu: remove old kernel configjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/xen_domu: switch to 3.10 and add broken flagjuhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/xen_domu: add config for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/geos: remove old kernel configsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/geos: switch to 3.10 and add broken flagjuhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23x86/geos: add config for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23brcm63xx: update LINUX_VERSION to 3.10.32juhosg
Missed from the previous comit. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23kernel: update 3.10 to 3.10.32juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: define status LED for the RB91x boardsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: rb91x: register GPIO LEDsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: rb91x: add SPI device for the serial shift registerjuhosg
The RB91x boards are using a serial shift register connected to the SPI bus to drive some of the LEDs. Rework the board setup code to register a SPI device for that. This makes it possible to use the 'spi-74x164' driver to control the device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx/mikrotik: enable the 74x164 GPIO driverjuhosg
That will be used to drive the 74HC595 serial-in/parallel-out 8-bits shift register which can be found on some RouterBOARDs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: improve platform device support in the gpio-74x164 driverjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23ar71xx: rb91x-nand: rewrite to use GPIO APIjuhosg
Rewrite tha rb91x-nand driver to use GPIO API to modify the NAND control lines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: rb91x: register a gpio-latch platform devicejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx/mikrotik: enable the GPIO latch driverjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: add a generic GPIO latch driverjuhosg
It will be used for the Mikrotik boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx/mikrotik: enable small sector erase in the m25p80 driverjuhosg
The serial flash devices used on the ROuterBOARDs are supporting 4KiB erase blocks. Enable the small sector erase option in the m25p80 driver to avoid superfluous erase/write of adjacent blocks. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: spi-ath79: fix initial GPIO CS line setupjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22ar71xx: refresh unaligned access hacks patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22target/sunxi: add dependency on sunxi to kmod-wdt-sunxinico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22gianfar: Fix reported number of sent bytes to BQLnbd
This is a backported patch for the gianfar ethernet driver used in TPLink 4900 v1. It is supposed to fix the error which show up in dmesg with: NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242 Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22b53: Make b53_switch_init staticjogo
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4869/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22b53: Add BCM53128 switch supportjogo
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4867/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix RG100A/DB120 usb port numberjogo
Set usbh ports to 2 to fix #15007. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix number of usb ports for HW556 variantsjogo
Don't only fix up the fallback board, but also all three variants. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add initial support for BCM963268BU_P300 reference boardjogo
Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add VW6339GU supportjogo
Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: fix number of switch ports for BCM63168/63268jogo
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268 has two additional RGMII ports, making it 8. Fix this by checking the chip variant and applying an appropriate limit. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: F@ST2504n board support (image, base-files)fast2504n-3.10.28-mergedjogo
Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: F@ST2504n board supportjogo
Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4729/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: add support for Asmax AR 1004g routerjogo
Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks <mexit@o2.pl> Patchwork: http://patchwork.openwrt.org/patch/4464/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL routerjogo
This adds profile and build image for Sagemcom F@st2704, using b43 driver. For WiFi to work properly BCMA fallback SPROM support patch must be applied (http://git.io/z1Ki8A). Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4212/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL routerjogo
This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL routerjogo
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20imx6: update Ventana dtsluka
Update the Ventana device-tree to match upstream: - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx - align pinctrl with upstream - consolidate multiple patches into one Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20imx6: enable IMX6 watchdogluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet lossjuhosg
When the RB91x device uses a GbE link the connection suffers from packet loss: root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 20 packets transmitted, 9 packets received, 55% packet loss round-trip min/avg/max = 4.570/4.815/4.999 ms Using a different PLL value fixes the issue. root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q PING 192.168.1.254 (192.168.1.254): 65507 data bytes --- 192.168.1.254 ping statistics --- 100 packets transmitted, 100 packets received, 0% packet loss round-trip min/avg/max = 4.449/5.413/13.870 ms Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20ar71xx: Add support for MikroTik RB951Ui-2HnDjuhosg
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP casesjuhosg
This is a backport of code to improve the quality of fq_codel hashing for 3.10 for some encapsulated protocols. Not needed in 3.11 and later. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4902/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20imx6: drop upstream rejected patchluka
http://article.gmane.org/gmane.linux.drivers.i2c/17891 Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39639 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-30 22:01:06 +0000