summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2013-04-30x86/geos: switch to 3.8.10juhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.9: implement pcibios_get_phb_of_node for MIPSjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.8: use backported pcibios_get_phb_of_node patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36494 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30kernel: update linux 3.8 to 3.8.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30at91: add missing config symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.{8,9}: add missing symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODELjuhosg
It is forced to 'y' since r36342. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ramips: move dlink profile to correct sub folder - 2nd tryblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ramips: move dlink profile to correct sub folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28broadcom-diag: support for the WNDR3700v3hauke
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28brcm47xx: use kernel 3.8.10 as default kernelhauke
The biggest change with this kernel is a new partition parser. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28brcm47xx: add board detection for NETGEAR WNDR4500 V2hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: fix a memory leak in split_rootfs_data()hauke
allocate_partition() copies all the content of dpart into a new struct. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing ↵hauke
master-2013-04-26. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: update linux 3.9 patches to rc8jogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: add missing bcma defines and header file for bcrmfmacjogo
Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add user-space support for WNR2000v3juhosg
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add profile and build image for WNR2000v3juhosg
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: Add Netgear WNR2000v3 supportjuhosg
Network connectivity works fine (LAN and WAN). For GPIOs, only pwr led and the green wan leds are supported for now. Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add profile and build image for the TL-WR720N v3 boardjuhosg
Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add user-space support for the TL-WR720N v3 boardjuhosg
Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add kernel support for TPLINK WR720N v3juhosg
Add support for TPLINK WR720N v3 which has 4MB flash, 32MB ram, 2 ethernet interfaces, 1 USB 2.0 port. The patch is mostly a modification from mach-tl-wr703n.c. GPIO numbers for the slider switch is from mach-tl-mr3020n.c. Tested on my device and they worked fine. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26mpc85xx: Add subtargets Generic and P1020juhosg
Only difference between Generic and P1020 is that P1020 enables SMP with two CPUs in the kernel config. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26kernel: update linux 3.8 to 3.8.9juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26at91: upgrade to kernel 3.8.7 and use devicetreejuhosg
This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ramips: rt3883: fix build errorjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: make leds and network work on VG3503Jblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: fix board detection helpersblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: move dts files to thir own folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25generic: fix rtl8366_smi compile warningblogic
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports': drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not ↵blogic
work yet Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: make lzma-loader based images for VG3503Jblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: update VG3503J.dts to match new partition layoutblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: add lzma-loader sourceblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: remove now unneeded user-space board detectionblogic
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: introduce DTS for ALL5003blogic
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: set preinit interface to eth0 by default.blogic
This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: Add Alpha ASL-26555 support.blogic
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: Add support of D-link DIR-620D1blogic
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: sync kernel patches with the mips-next treeblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25preinit: move cmdline failsafe= handling ot the generic codeblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36430 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-23bcm63xx: update patches with upstream submissionsjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-23bcm63xx: switch to linux 3.8jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22Change default IPv6 config to enable DHCPv6-PDcyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULLnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22ar71xx: merge more unaligned access hacks from cerowrt-nextnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19kernel: backport SSB/BCMA changes in preparation for a compat-wireless updatenbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19linux/3.9: add missing config symboljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19linux/3.[89]: update bridge_remove_ipv6_dependency patchjuhosg
Fixes the following warning: CC [M] net/ipv6/addrconf.o net/ipv6/addrconf.c: In function 'addrconf_init': net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19kernel: update linux 3.8 to 3.8.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36363 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 12:37:48 +0000