summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2007-12-13danube gpio clean upblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13danube gpio clean upblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9741 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13danube gpio cleanupblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9740 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13danube gpio cleanupblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9739 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13add original danube gpio driver ... already did some minor cleanupblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13danube led cleanupblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13danube led cleanupblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13danube led cleanupblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13add original danube led driverblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13cleanup danube watchdog timerblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13cleanup danube watchdog timerblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13cleanup danube watchdog timerblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13initial merge of danube wdt codeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13add atheros reset button fixes from #2774nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12[adm5120] use a shadow value for the write-only GPIO_CONF2 registerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12[adm5120] use the right irq_handler in the CF driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12[adm5120] fix mac address setup on RouterBOARDsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12Removing Grub for olpc (unnecessary)ryd
Adding Bootscript Some SD-Card fixes Config changes git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12remove an unused #include statement that is causing compile issues on osxnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11[adm5120] enable wait state pin for the CF slot on the RB153 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11[adm5120] RB153 CF driver fixesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11[adm5120] new experimental driver for the CF slot on the RouterBOARD 153juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-11Replace deprecated DEBUG config symbolflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10added CONFIG_DANUBE_PCI_HW_SWAPblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10initial merge of danube, pci is still broken and the new dma code still ↵blogic
needs to be tested, before the merge git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10[adm5120] add support for GPIO IRQsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10Enable SSB ohci driver (#2828)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10Disable CONFIG_NETDEVICES_MULTIQUEUE for ar7 until we fix the race conditionflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Use $(CP) instead of $(INSTALL_BIN) for binaries.nbd
Signed-off-by: Andy Boyett <agb-openwrt@padded-cell.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Forgot removing that file while applying patch from #2757florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Add bcm5354 patches from #2757florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Add bcm5354 patch from #2754florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Fix missing returnflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Setup MAC addresses for routerboardsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-08bump kernel to 2.6.23.9 for x86pavlov
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-08updated layer7 to 2.15.. current is 2.16.1, i might bump again, this has ↵pavlov
been uncommitted for a bit git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07ixp4xx: Rename fsg3 subtarget to harddisk to better reflect the intention of ↵rwhitby
the subtarget git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07ixp4xx: Split into two subtargets, one normal and one for boards which boot ↵rwhitby
directly from attached storage (and therefore need most kernel modules compiled in) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07add missing kernel config symbolnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07Minor patch to the AR7 diag.sh to make the status LED a bit more useful. ↵nbd
From the patch: This setup gives us 3.5 distinguishable states: - Solid OFF: Bootloader running, or kernel hung (timer task stalled) - Solid ON: Kernel hung (timer task stalled) - 5Hz blink: preinit - Heartbeat: normal operation Signed-off-by: oliver@opencloud.com git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07[PATCH 2/2] Reimplement rx ring with EOQ markers to avoid reset stormsnbd
Signed-off-by: oliver@opencloud.com git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-07[PATCH 1/2] Fix race between device reset and start_xmitnbd
Signed-off-by: oliver@opencloud.com git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-05[adm5120] add copyright header to the USB driver's filesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-04Fix VLYNQ device enable for DG834Gv1nbd
This patch allows VLYNQ devices on the DG834Gv1 to be successfully enabled. Currently the "__vlynq_enable_device" function attempts to set the VLYNQ device clock divisor to values from 1 through 8 until a link is successfully established. On the DG834Gv1 (but not the DG834Gv2), setting the VLYNQ device clock divisor to 1 (full rate) results in all further VLYNQ operations failing (including software reset), so the device is never enabled. This patches changes the function to only attempt divisors 2 through 8, and hence the device is successfully enabled. Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com> --------- git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-29[adm5120] switch to 2.6.23.9juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28add support for the PCEngines Alixthepeople
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28add txpower patches and add uci configuration file From: Vasilis T. (aka ↵thepeople
Acinonyx) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28ps3: use readable video mode descriptions in readmenbd
The ps3 video modes can be specified as readable names (eg "720p"), so use those instead. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-28ps3: build-in ps3 system managernbd
This changes the ps3 kernel config to build-in the System Manager module, which is required for proper shutdown and reboot. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-26[adm5120] add Edimax BR-61x4WG board support to the LED driver, thanks to ↵juhosg
scream_ (closes: #2756) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9600 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 10:45:44 +0000