summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2014-02-20ar71xx: Add support for MikroTik RB951Ui-2HnDjuhosg
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP casesjuhosg
This is a backport of code to improve the quality of fq_codel hashing for 3.10 for some encapsulated protocols. Not needed in 3.11 and later. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4902/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-20imx6: drop upstream rejected patchluka
http://article.gmane.org/gmane.linux.drivers.i2c/17891 Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 boardjuhosg
Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4850/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 boardjuhosg
Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4849/ [juhosg: - use the Archer C7 specific LED setup instead of adding identical code] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 boardjuhosg
Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4848/ [juhosg: - rename and refresh kernel patch, - merge the board setup code into mach-archer-c7.c and drop mach-tl-wdr49000-v2.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19sunxi: move a lost CONFIG_CHARGER symbol to genericnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18target/sunxi: make REGMAP built-in (used by REGULATOR)nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39633 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18target/uml: update READMEnico
invoking uml is now simplier, not need to setup console & serial git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18kernel: refresh configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ar71xx: fix unaligned access hacks for tcp timestampsjuhosg
This missing bit of the hack saves hugely on instruction traps on tcp connections to ar71xx based routers. Patch-by: Dave Taht <dave.taht@bufferbloat.net> Patchwork: http://patchwork.openwrt.org/patch/4905/ [juhosg: adjust subject, refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ar71xx: WNR2200: fix mounting root fs problemjuhosg
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356> Without this patch, UART output will show only 4 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000050000 : "u-boot" [ 0.760000] 0x000000050000-0x000000070000 : "u-boot-env" [ 0.770000] 0x000000070000-0x0000007f0000 : "firmware" [ 0.790000] 0x0000007f0000-0x000000800000 : "art" and then linux complains :VFS: Cannot open root device "(null)" With this patch, UART out will show 7 partitions: [ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.750000] Creating 4 MTD partitions on "spi0.0": [ 0.750000] 0x000000000000-0x000000040000 : "u-boot" [ 0.760000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.770000] 0x000000050000-0x0000007f0000 : "firmware" [ 0.780000] 2 netgear-fw partitions found on MTD device firmware [ 0.780000] 0x000000050000-0x00000014b440 : "kernel" [ 0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.800000] 0x00000014b440-0x0000007f0000 : "rootfs" [ 0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 0.820000] mtd: device 4 (rootfs) set to be root filesystem [ 0.830000] 1 squashfs-split partitions found on MTD device rootfs [ 0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data" [ 0.840000] 0x0000007f0000-0x000000800000 : "art" This patch is tested against r39502 of trunk. Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw> Patchwork: http://patchwork.openwrt.org/patch/4870/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ralink: add support for na930blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ralink: add gpio_uartf mux groupblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18ralink: fix the gpio mode mappingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-173.13: revert r39601 as the symbol is already therewigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-173.13: add missing NF_TABLES symbol - until someone packages itwigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-173.13: add missing symbolwigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-16kirkwood: dockstar: remove sata from packagesluka
The dockstar doesn't have any sata ports. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-16kirkwood: add support for Seagate GoFlexNetluka
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-15kirkwood: update support for dockstarluka
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by: Alexander Couzens <lynxis@fe80.eu> CC: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-15kirkwood: update support for ib62x0luka
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-15kirkwood: update support for iconnectluka
Previous patch was pushed due to false user report. While at it fix alphabetic ordering. The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0x1fe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-15kernel: rtl8306: update reset functionluka
Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-15lantiq: fix typo in pinctl driverluka
Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-15lantiq: fix PCI problems on ARV4510PWluka
Some ARV4510PW units seem to have unstable PCI due to missing pull-up resistors. This patch makes sure that the GPIO lines are driven properly. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-14[omap]: use the default package setkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-13ar71xx: fix mtdpartsize macro in image Makefile (#14961)jow
The mtdpartsize macro triggers shell errors on various Linux distributions when the partname argument $(1) does not appear within the partmap $(2). Change the sed pattern to only emit anything if a successful substitution occured and only evaluate the arithmetic expression if something was printed by the sed program. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-13upgrade 3.13 targets to 3.13.2, refresh patcheskaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-13[generic]: upgrade 3.12 to 3.12.10kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-13[omap]: change image generation logickaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-12[omap]: handle some CONFIG_TARGET_ROOTFS_INCLUDE_ fookaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39578 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-12[omap]: copy initramfs zImage to the bin dir as wellkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-12[omap]: generate ubifs imageskaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-12imx6: drop 3.12 supportluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-12imx6: add initial 3.13 supportluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-11mvebu: enable NAND controller supportluka
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-11mvebu: add support for the Armada XP GP board (DB-MV784MP-GP)luka
This Armada XP GP board from Marvell comes with: * 2GB DDR3 DIMM * 1GB NAND flash (8-bit interface) * 16MB NOR flash (16-bot interrface) * 16MB SPI flash * SDIO module * 3 PCIe * 1 SATA link * 2 USB EHCI * 1 internal SSD * 4 Ethernet Gigabit * 1 RS232 port over USB Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-11mvebu: update kernel configluka
The config-3.10 doesn't specify the configuration of the backported PCI features, and the Marvell EBU Device Bus Controller, this will prevent a clean compile. This patch enables these features to archive a clean compile without having to specify the state of these configuration after starting to compile. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-11mvebu: backport mainline patches from kernel 3.13luka
This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13. This work mainly covers: * Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family, and the Armada family. * timer initialization update, and access function for the Armada family. * Generic IRQ handling backporting. * Some bug fixes. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-11mvebu: backport mainline patches from kernel 3.12luka
This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12. This work mainly covers: * Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family,and the Armada family. * Further updates to the mvebu MBus. * Work and ground work for enabling MSI on the Armada family. * some phy / mdio bus initialization related work. * Device tree binding documentation update. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-11mvebu: backport mainline patches from kernel 3.11luka
This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11. This work mainly covers: * Enabling USB storage, and PCI to mvebu_defconfig. * Add support for NOR flash. * Some PCI device tree related updates, and bus parsing. * Adding Armada XP & 370 PCI driver, and update some clock gating specifics. * Introduce Marvell EBU Device Bus driver. * Enaling USB in the armada*.dts. * Enabling, and updating the mvebu-mbus. * Some SATA and Ethernet related fixes. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-10kernel: fix kmod-usb-net-smsc95xxhauke
smsc95xx.ko depends on crc16.ko on kernel >= 3.8 There was an additional kmod-usb-net-smsc95xx definition in the mxs target code which conflicted with the one in the common area. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-10[generic/3.13]: keep initramfs the default for uskaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-10[omap]: don't build in usb stuffkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-09[usb]: additional musb fixupskaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-09[usb]: move some omap24xx modules to the generic Makefilekaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-08kernel: XHCI PCI quirks for kernel 3.12 and 3.13hauke
This adds empty definitions for the PCI quirks functions when they should not be included in the kernel. This is based on a patch by Daniel <daniel@makrotopia.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-08kernel: fix bridge compilation on kernel 3.13hauke
The int brnf_call_ebtables in the header should be extern, otherwise every object file gets its own int and they will conflict when linking the binary. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-08kernel: add missing config symbol for 3.13.hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39531 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 03:33:53 +0000