summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2013-03-15generic: ar8216: simplify and rename ar8327_config_portjuhosg
Return with the PORT_STATUS register value instead of writing that directly into the corresponding register. Also rename the function to ar8327_get_port_init_status. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15generic: ar8216: remove superfluous pdata checksjuhosg
The presence of the platform data is already verified in ar8327_hw_init, and the driver does not start without that anyway. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15kernel: update linux 3.8 to 3.8.3juhosg
Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15ar71xx: build images for the TL-MR11U v2juhosg
[juhosg: use different profile name for v1 and v2, and add multi profile to build for both versions] Signed-off-by: Guilhem Lettron <guilhem@lettron.fr> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15ar71xx: rw2458n - Use eeprom (art) from wifi cardjuhosg
Use eeprom (art) from included wifi card, not hard coded in flash. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configurationjuhosg
Error in using another MDIO (AP123 platform using only one GE1 device for eth0 and eth1) for the router mr3420v2. ?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779 Routers in this sense are the same and the only difference is: USB port, USB led, instead of the GPIO-switch we have GPIO-button. Signed-off-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] ACMP252: fix USB-enable GPIO and use default PCI configuration for nowblogic
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove ralink_eep from the dts. USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force). PCI works with default settings as long as the vendor bootloader is used. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] fix buttons on vr9 eval kitblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] select vdsl packages on vr9 boardsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] fix fritzbox 3370 partitions/memory/cmdlineblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] build jffs images for nand based fritzboxblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] bump to v3.8blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] move GPHY FW blobs to non versioned folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14kernel: add support for 3.9-rc2florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13[base-files/generic] update the /init file to start /sbin/initblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13[ar71xx] make sure the console works when using procd as our pid 1blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12gemini: remove 3.3 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12gemini: switch to 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12gemini: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] fixes NO_XIP on CFI0001 flashblogic
This patch disables the execute-in-place (XIP) support for flash on lantiq. This has to be disabled since the bus which flash is connected to does not support unaligned accesses. Resolves data bus errors on Lantiq routers with Intel command set flash. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] add support for AudioCodes AC-252blogic
user-space support for extracting the EEPROM for the RaLink WiFi is still missing. Besides this, it's all working. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] unbreak dgn3500 spi-gpioblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[ramips] make sure errors get sent to /dev/nullblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[ar71xx] make sure errors get sent to /dev/nullblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: remove 3.3 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: switch to 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: add sysupgrade supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: add firmware partitionjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: add diag supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: create network config dynamicallyjuhosg
The default network configuration from base-files is not correct for the NGW100 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12avr32: built the firmware images from the lzma compressed uImagejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12mpc52xx: remove 3.3 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12mpc52xx: switch to 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12mpc52xx: add support for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ramips: add profile and build image for the Upvel UR-326N4G boardjuhosg
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ramips: add user-space support for the Upvel UR-326N4G boardjuhosg
[juhosg: fix mac address setup] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ramips: add kernel support for the Upvel UR-326N4G boardjuhosg
[juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: om2p-hs: use correct bit mask to disable JTAG functionalityjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: add AR934X_GPIO_FUNC_* definesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: makefile changes to build image for MR3420v2juhosg
Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3440/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: add user-space support for MR3420v2juhosg
Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3442/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: add kernel support for MR3420v2juhosg
[juhosg: use gpio_request_one to enable the USB power] Patch-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@opewrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11Ujuhosg
LAN1 and LAN2 LEDs not present (it pulled to ground via resistors) on MR3040 and MR11U devices. This little patch enabling ability to control GPIO14 and GPIO15. Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3439/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: add profile support for dir-835-a1juhosg
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: add user space support for dir-835-a1juhosg
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ar71xx: add kernel support for dir-835-a1juhosg
[juhosg: - remove custom mdio bus info and platform data for ar8327, clear the .led_cfg field from dir835a1_setup instead, - remove arguments of dir835c1_generic_setup function, register the LEDs directly from the board specific setup instead] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce ↵nbd
memory pressure git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11cns3xxx: ethernet - clean the tx ring only in the poll function, not in the ↵nbd
xmit handler git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10cns3xxx: increase number of ethernet driver rx buffersnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35951 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 19:40:28 +0000