summaryrefslogtreecommitdiff
path: root/target/linux/generic-2.6/files/drivers
AgeCommit message (Expand)Author
2010-03-09ar8216: fix the mtu register definitionnbd
2010-03-09Several small fixes for ar8216 driver (patch by Jonas Gorski)nbd
2010-02-24kernel: add driver for the RTL8366RB switchjuhosg
2010-02-24kernel: fix typos in the AR8216 header filejuhosg
2010-01-30rtl8366_smi: sanitize gpio values to a 0/1 booleanjuhosg
2010-01-27rtl8366s: reset the chip early, this allows ethernet to work as soon as possiblejuhosg
2010-01-25rtl8366: make it available on all platformsjuhosg
2010-01-13kernel: change debounce logic in the gpio-buttons driverjuhosg
2009-12-25deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic ...nbd
2009-12-09rtl8306: manage the wan port as a separate phy device with proper link status...nbd
2009-12-08ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160n...nbd
2009-12-08fix link status detection in various switch driversnbd
2009-09-16move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic file...nbd
2009-08-14add a driver for rtl8306 switchesnbd
2009-07-11ar8216: rename the vlan attribute to enable_vlan to keep it consistent with o...nbd
2009-06-29ar8216: fix transmission of large frames by setting the switch mtunbd
2009-06-14ar8216: add delay for page switching to work around register setting corrupti...nbd
2009-04-30fix a crash in ip175c attribute enumerationnbd
2009-04-29Add a driver for Atheros AR8216 switchesnbd
2009-04-28swconfig: add a generic switch reset callnbd
2009-04-20clean up the ip175c driver some more, add support for setting the pvid and fi...nbd
2009-04-20swconfig: add a generic method for setting the port primary vlan id (used for...nbd
2009-04-20add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)nbd
2009-04-20swconfig: treat struct switch_attr as constantnbd
2009-04-20swconfig: remove old debugging stuffnbd
2009-04-10mvswitch: re-enable header modenbd
2009-03-22atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2...nbd
2009-03-22mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware ...nbd
2009-01-23[kernel] generic-2.6: make MyLoader parser compatible with the old partition ...juhosg
2008-11-17[adm5120] move MyLoader partition parser into generic files, will be used on ...juhosg
2008-10-28improve routing/nat performance for devices using the marvell 88e6060 switchnbd
2008-10-18change the way ./files* and the generic kernel files are applied. ./files now...nbd
2008-10-05[kernel] make gpio_dev compatible with GPIOLIB & GPIO_SYSFS (closes #4016)juhosg
2008-08-05[kernel] modules/gpio_dev: move to drivers/char/ on older kernels as well, an...juhosg
2008-08-04makes ledtrignetdev work on .26 and fix whitespacesblogic
2008-07-21add missing defines for mvswitchnbd
2008-07-19some more mvswitch fixes:nbd
2008-07-19add extra safety for the packet mangling in the mvswitch drivernbd
2008-06-09set marvell switch ATU ageing time to minimum instead of maximum - hopefully ...nbd
2008-05-18Remove bogus zero-length ohci-ssb.c in generic-2.6/filesnoz
2008-04-29enable a different pseudo-vlan mode in the marvell switch (uses a proprietary...nbd
2008-04-28allow bigger packets in the marvell switch (does not fix the mtu problems yet)nbd
2008-04-24fix vlan mapping for cpu port on the marvell switchnbd
2008-04-23clear VLANTunnel bit on the marvell switch ports - should help with some brid...nbd
2008-04-20Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ an...nbd
2008-04-20Add stub driver for ADM6996F switches (configured through MII)nbd
2008-04-15[package] move spi_gpio driver into the kernel, clean-up SPI modulesjuhosg
2008-04-08[kernel] modules/gpio-buttons: fix build error on older kernelsjuhosg
2008-04-08ssb-mips: Fix IRQ routing on the MIPS core.mb
2008-04-07[kernel] add a polled GPIO buttons input driverjuhosg