index
:
openwrt.git
fast2504n-3.10.17
fast2504n-3.10.26
fast2504n-3.8
master
OpenWRT with patches for F@ST2504n board
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
target
/
linux
/
ar71xx
/
files
/
drivers
Age
Commit message (
Expand
)
Author
2011-12-15
ar71xx: ag71xx: fix switch port setup for AR934X
juhosg
2011-12-15
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
juhosg
2011-12-15
ar71xx: ag71xx: setup switch interface mode on AR934X
juhosg
2011-12-15
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
juhosg
2011-12-15
ar71xx: introduce ar71xx_switch_data
juhosg
2011-12-15
ar71xx: tplinkpart: allow to detect JFFS2 as well
juhosg
2011-12-15
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
juhosg
2011-12-15
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
juhosg
2011-12-15
ar71xx: ag71xx: nuke ar7240sw_init
juhosg
2011-12-05
ar71xx: check squashfs signature in TP-Link mtd parser
juhosg
2011-12-03
ar71xx: add mtd partition parser for the TP-Link boards
juhosg
2011-11-14
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
juhosg
2011-11-14
ar71xx: merge nand scan patch
juhosg
2011-11-13
ar71xx: ag71xx: add support for getting switch port link status
juhosg
2011-11-13
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
juhosg
2011-11-13
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
juhosg
2011-11-13
ar71xx: set MII interface speed from the set_speed callbacks
juhosg
2011-11-13
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
juhosg
2011-11-13
ar71xx: ag71xx: remove MII interface setup code
juhosg
2011-11-12
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
juhosg
2011-11-08
ar71xx: remove dead code
nbd
2011-11-08
ar71xx: on ar7240, exclude ports from their own port vlan destination mask
nbd
2011-10-08
ag71xx: close a race between the phy state machine and link state
jogo
2011-09-11
ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)
nbd
2011-08-13
ar71xx: add some code to detect DMA stuck conditions on ar7240
nbd
2011-08-13
ar71xx: on ar724x only reset the link status in the restart handler, the fast...
nbd
2011-08-04
ar71xx: fix ethernet FIFO state corruption on ar7240
nbd
2011-08-04
ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop
nbd
2011-08-04
ar71xx: fix MAC/MDIO reset mask handling
nbd
2011-07-20
ar71xx: reinitialize global switch settings after reset on ar7240
nbd
2011-07-20
ar71xx: configure address aging on ar7240
nbd
2011-07-20
ar71xx: reset the phy in the ethernet init on ar724x
nbd
2011-07-20
ar71xx: make sure that rx and interrupts are disabled before issuing the hard...
nbd
2011-07-20
ar71xx: increase the delay after the ethernet MAC reset
nbd
2011-07-20
ar71xx: fix an unused variable warning
nbd
2011-07-09
ar71xx: do not reset the hardware on transmit timeout - this would mess up th...
nbd
2011-07-09
ag71xx: keep the rx engine stopped while the link is not up, should hopefully...
nbd
2011-06-29
ar71xx: merge 2.6.39 patches
juhosg
2011-06-29
ar71xx: add 2.6.39 support
juhosg
2011-06-19
ar71xx: cleanup AR933X UART driver
juhosg
2011-06-13
ar71xx: use ar933x_uart.h in the AR933X serial driver
juhosg
2011-06-04
ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
juhosg
2011-06-01
Revert "ar71xx: only enable the rx engine after the link is up..."
nbd
2011-05-31
ar71xx: add serial driver for the AR933X UART
juhosg
2011-05-31
ar71xx: the watchdog uses the reference clock on the AR933x SoCs
juhosg
2011-05-31
ar71xx: Fix header offset for newer WRT160NL models
juhosg
2011-05-31
ar71xx: ag71xx: make ring sizes configurable via ethtool
juhosg
2011-05-31
ar71xx: ag71xx: prepare to make ring sizes configurable
juhosg
2011-05-31
ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
juhosg
2011-05-30
ar71xx: only enable the rx engine after the link is up, fixes a race conditio...
nbd
[next]