summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/files/arch
AgeCommit message (Expand)Author
2009-12-20ar71xx: update AR7240 PCI codejuhosg
2009-12-19ar71xx: Fix LED active_low for the TL-WR1043ND boardjuhosg
2009-12-18tl-wr1043nd: Register missing leds.juhosg
2009-12-18ar71xx: ar913x_wmac device support into a separate filejuhosg
2009-12-18ar71xx: move AP94 specific PCI init code into a separate filejuhosg
2009-12-18ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on thejuhosg
2009-12-18ar71xx: add common m25p80 devicejuhosg
2009-12-11ar71xx: add driver for the USB LED on the WNDR3700juhosg
2009-12-11ar71xx: add ar71xx_device_stopped functionjuhosg
2009-12-11ar71xx: merge DSA switch patchjuhosg
2009-12-09ar71xx: register rtl8366-smi device on the DIR-825 B1 boardjuhosg
2009-12-09rtl8306: manage the wan port as a separate phy device with proper link status...nbd
2009-12-08ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160n...nbd
2009-12-08ar71xx: TL-WR1043ND support cleanupjuhosg
2009-12-08ar71xx: preliminary support for the TL-WR1043NDjuhosg
2009-12-08ar71xx: register rtl8366_smi device on the WNDR3700juhosg
2009-12-08ar71xx: add support for external mii_busjuhosg
2009-12-03ar71xx: DIR-825 support cleanupjuhosg
2009-12-03ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks tojuhosg
2009-11-30ar71xx: override fifo_cfg[123] values on AR7240juhosg
2009-11-29ar71xx: add usb support for ubnt rocket mnbd
2009-11-28ar71xx: fix mac address for 5GHz interface on WNDR3700juhosg
2009-11-27ar71xx: add PCI fixup for the WNDR3700 boardjuhosg
2009-11-27ar71xx: fix pll_1000 values for the WNDR3700juhosg
2009-11-27ar71xx: add AR724x GPIO_FUNC register bit definesjuhosg
2009-11-27ar71xx: fix AR724X_GPIO_COUNTjuhosg
2009-11-27ar71xx: add AR724x register definesjuhosg
2009-11-18ar71xx: use a separate board id for rocket mnbd
2009-11-18ar71xx: add Ubiquiti Rocket M and Nanostation M supportmatteo
2009-11-16ar71xx: setup platform data for ath9k on the TL-WR741ND, Bullet M and on the ...juhosg
2009-11-16ar71xx: register LEDs and buttons on the WNDR3700juhosg
2009-11-16ar71xx: use __init for ar{71,91}xx_usb_setupjuhosg
2009-11-13ar71xx: add preliminary support for the Netgear WNDR3700juhosg
2009-10-30ar71xx: use soc specific divider for mdio clockjuhosg
2009-10-20ar71xx: Compex WPJ543 board is supported as welljuhosg
2009-10-20ar71xx: fix PCI IRQ map of the WP543juhosg
2009-10-19ar71xx: reset the phy chip along with the ethernet mac on the WP543 boardjuhosg
2009-10-19ar71xx: reset the ethernet device before registrationjuhosg
2009-10-01ar71xx: initialize PCI controller on the Bullet Mjuhosg
2009-10-01ar71xx: init ethernet mac address on the Bullet Mjuhosg
2009-10-01ar71xx: register GPIO button on the Bullet Mjuhosg
2009-10-01ar71xx: add PCI Host Controller fixup for ar724xjuhosg
2009-10-01ar71xx: use ar71xx_pci_fixup on ar71xx SoCs onlyjuhosg
2009-10-01ar71xx: fix a typo in the ar724x PCI codejuhosg
2009-09-23ar71xx: don't use mac_base2 in the ag71xx driverjuhosg
2009-09-15ar71xx: preliminary Ubiquiti Bullet M supportmatteo
2009-09-10ar71xx: rewrite prom code (based on a patch by Jeff Hansen)juhosg
2009-09-08ar71xx: add preliminary support for the RB-411U (thanks to Feher Zoltan for t...juhosg
2009-08-26[ar71xx] move early_printk stuff into a separate filejuhosg
2009-08-25[ar71xx] remove AR71XX_EARLY_SERIAL stuffjuhosg