summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/brcm63xx/base-files/etc/uci-defaults/02_network3
-rw-r--r--target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch71
-rw-r--r--target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch71
-rw-r--r--target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch71
4 files changed, 215 insertions, 1 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 106bf5f86f..f59fed6781 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -14,6 +14,8 @@ ucidef_set_interface_loopback
case "$board_name" in
+RTA770BW |\
+RTA770W |\
96348W3 |\
96358-502V |\
SPW500V)
@@ -31,7 +33,6 @@ CT6373-1 |\
D-4P-W |\
"F@ST2604" |\
RTA1320_16M |\
-RTA770BW |\
V2110)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "eth0" "1" "1"
diff --git a/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
new file mode 100644
index 0000000000..e0eedad1e7
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -796,6 +796,60 @@
+ },
+ },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++ .name = "RTA770W",
++ .expected_cpu_id = 0x6345,
++
++ .has_uart0 = 1,
++
++ .has_enet0 = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .leds = {
++ {
++ .name = "RTA770W:green:usb",
++ .gpio = 7,
++ .active_low = 1,
++ },
++ {
++ .name = "RTA770W:green:adsl",
++ .gpio = 8,
++ },
++ {
++ .name = "RTA770W:green:diag",
++ .gpio = 10,
++ .active_low = 1,
++ },
++ {
++ .name = "RTA770W:green:wlan",
++ .gpio = 11,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 13,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .active_low = 1,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -3750,6 +3804,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ &board_96345gw2,
+ &board_rta770bw,
++ &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch
new file mode 100644
index 0000000000..e0eedad1e7
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -796,6 +796,60 @@
+ },
+ },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++ .name = "RTA770W",
++ .expected_cpu_id = 0x6345,
++
++ .has_uart0 = 1,
++
++ .has_enet0 = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .leds = {
++ {
++ .name = "RTA770W:green:usb",
++ .gpio = 7,
++ .active_low = 1,
++ },
++ {
++ .name = "RTA770W:green:adsl",
++ .gpio = 8,
++ },
++ {
++ .name = "RTA770W:green:diag",
++ .gpio = 10,
++ .active_low = 1,
++ },
++ {
++ .name = "RTA770W:green:wlan",
++ .gpio = 11,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 13,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .active_low = 1,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -3750,6 +3804,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ &board_96345gw2,
+ &board_rta770bw,
++ &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
new file mode 100644
index 0000000000..e0eedad1e7
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -796,6 +796,60 @@
+ },
+ },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++ .name = "RTA770W",
++ .expected_cpu_id = 0x6345,
++
++ .has_uart0 = 1,
++
++ .has_enet0 = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .leds = {
++ {
++ .name = "RTA770W:green:usb",
++ .gpio = 7,
++ .active_low = 1,
++ },
++ {
++ .name = "RTA770W:green:adsl",
++ .gpio = 8,
++ },
++ {
++ .name = "RTA770W:green:diag",
++ .gpio = 10,
++ .active_low = 1,
++ },
++ {
++ .name = "RTA770W:green:wlan",
++ .gpio = 11,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 13,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .active_low = 1,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -3750,6 +3804,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ &board_96345gw2,
+ &board_rta770bw,
++ &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ &board_96348r,