summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ubicom32/config-default (renamed from target/linux/ubicom32/config-2.6.30)0
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h5
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/include/asm/bitsperlong.h1
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h16
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h4
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h5
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h3
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c3
-rw-r--r--target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c16
-rw-r--r--target/linux/ubicom32/files/drivers/net/ubi32-eth.c24
-rw-r--r--target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c10
-rw-r--r--target/linux/ubicom32/patches-2.6.32/100-ubicom32_support.patch1725
-rw-r--r--target/linux/ubicom32/patches-2.6.32/110-vmlinux_lds_fix.patch150
-rw-r--r--target/linux/ubicom32/patches-2.6.32/120-libgcc_func.patch419
-rw-r--r--target/linux/ubicom32/patches-2.6.32/130-flash_driver_fix.patch13
-rw-r--r--target/linux/ubicom32/patches-2.6.32/140-arch_cflags.patch13
16 files changed, 2387 insertions, 20 deletions
diff --git a/target/linux/ubicom32/config-2.6.30 b/target/linux/ubicom32/config-default
index 47cb52995b..47cb52995b 100755
--- a/target/linux/ubicom32/config-2.6.30
+++ b/target/linux/ubicom32/config-default
diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h
index 78d9fcd8f2..aaf7726020 100644
--- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h
+++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h
@@ -236,7 +236,12 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+#include <asm-generic/atomic-long.h>
+#else
#include <asm-generic/atomic.h>
+#endif
/*
* The following is not a real function. The compiler should remove the function
diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitsperlong.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitsperlong.h
new file mode 100644
index 0000000000..6dc0bb0c13
--- /dev/null
+++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitsperlong.h
@@ -0,0 +1 @@
+#include <asm-generic/bitsperlong.h>
diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h
index 89c6ce61c7..1ecb174a65 100644
--- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h
+++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h
@@ -28,10 +28,12 @@
#ifndef _ASM_UBICOM32_PAGE_H
#define _ASM_UBICOM32_PAGE_H
+#include <linux/const.h>
+
/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define PAGE_SHIFT (12)
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#include <asm/setup.h>
@@ -99,7 +101,15 @@ extern unsigned long memory_end;
#endif /* __ASSEMBLY__ */
-#ifdef __KERNEL__
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+#include <asm-generic/getorder.h>
+#else
#include <asm-generic/page.h>
#endif
diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h
index 70ad115ccf..ffb30a9ecf 100644
--- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h
+++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h
@@ -114,11 +114,15 @@ extern inline void flush_pages_to_ram (unsigned long address, int n)
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+#include <asm-generic/pgtable.h>
+#else
#define arch_enter_lazy_mmu_mode() do {} while (0)
#define arch_leave_lazy_mmu_mode() do {} while (0)
#define arch_flush_lazy_mmu_mode() do {} while (0)
#define arch_enter_lazy_cpu_mode() do {} while (0)
#define arch_leave_lazy_cpu_mode() do {} while (0)
#define arch_flush_lazy_cpu_mode() do {} while (0)
+#endif
#endif /* _ASM_UBICOM32_PGTABLE_H */
diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h
index a334e19ea3..946b3f77d6 100644
--- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h
+++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h
@@ -124,7 +124,12 @@ typedef struct {
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+#include <asm-generic/signal-defs.h>
+#else
#include <asm-generic/signal.h>
+#endif
#ifdef __KERNEL__
struct old_sigaction {
diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h
index 2d95c24f78..24ac113140 100644
--- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h
+++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h
@@ -84,4 +84,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_UBICOM32_SOCKET_H */
diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c
index ff0634424d..58baf52709 100644
--- a/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c
+++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c
@@ -34,12 +34,15 @@
#include <linux/mqueue.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
+#include <linux/version.h>
///static struct fs_struct init_fs = INIT_FS;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32)
struct mm_struct init_mm = INIT_MM(init_mm);
EXPORT_SYMBOL(init_mm);
+#endif
/*
* Initial task structure.
diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c
index d2d094d37a..1943cbb9ee 100644
--- a/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c
+++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c
@@ -169,7 +169,7 @@ static struct clocksource timer_device_clockbase = {
* timer_device_alloc_event()
* Allocate a timer device event.
*/
-static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t *mask)
+static int timer_device_alloc_event(const char *name, int cpuid, const struct cpumask *cpumask)
{
struct clock_event_device *dev;
struct irqaction *action;
@@ -208,10 +208,10 @@ static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t
action->name = name;
action->flags = IRQF_DISABLED | IRQF_TIMER;
action->handler = timer_device_event;
- cpumask_copy(&action->mask, mask);
+ //cpumask_copy(&action->mask, mask);
action->dev_id = dev;
setup_irq(dev->irq, action);
- irq_set_affinity(dev->irq, mask);
+ irq_set_affinity(dev->irq, cpumask);
ldsr_disable_vector(dev->irq);
/*
@@ -229,7 +229,7 @@ static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t
dev->mult = div_sc(frequency, NSEC_PER_SEC, dev->shift);
dev->max_delta_ns = clockevent_delta2ns(0xffffffff, dev);
dev->min_delta_ns = clockevent_delta2ns(100, dev);
- dev->cpumask = mask;
+ //dev->cpumask = mask;
printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name);
/*
@@ -246,7 +246,7 @@ static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t
*/
int __cpuinit local_timer_setup(unsigned int cpu)
{
- return timer_device_alloc_event("timer-cpu", cpu, cpumask_of(cpu));
+ return timer_device_alloc_event("timer-cpu", cpu);
}
#endif
@@ -283,19 +283,19 @@ void timer_device_init(void)
/*
* Always allocate a primary timer.
*/
- timer_device_alloc_event("timer-primary", -1, CPU_MASK_ALL_PTR);
+ timer_device_alloc_event("timer-primary", -1, cpu_all_mask);
#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
/*
* If BROADCAST is selected we need to add a broadcast timer.
*/
- timer_device_alloc_event("timer-broadcast", -1, CPU_MASK_ALL_PTR);
+ timer_device_alloc_event("timer-broadcast", -1, cpu_all_mask);
#endif
/*
* Allocate extra timers that are requested.
*/
for (i = 0; i < CONFIG_TIMER_EXTRA_ALLOC; i++) {
- timer_device_alloc_event("timer-extra", -1, CPU_MASK_ALL_PTR);
+ timer_device_alloc_event("timer-extra", -1, cpu_all_mask);
}
}
diff --git a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
index e6c7392e06..e9c62f4625 100644
--- a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
+++ b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
@@ -634,6 +634,19 @@ void ubi32_eth_cleanup(void)
}
}
+ static const struct net_device_ops ubi32_netdev_ops = {
+ .ndo_open = ubi32_eth_open,
+ .ndo_stop = ubi32_eth_close,
+ .ndo_start_xmit = ubi32_eth_start_xmit,
+ .ndo_tx_timeout = ubi32_eth_tx_timeout,
+ .ndo_do_ioctl = ubi32_eth_ioctl,
+ .ndo_change_mtu = ubi32_eth_change_mtu,
+ .ndo_set_config = ubi32_eth_set_config,
+ .ndo_get_stats = ubi32_eth_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ };
+
int ubi32_eth_init_module(void)
{
struct ethtionode *eth_node;
@@ -706,16 +719,9 @@ int ubi32_eth_init_module(void)
spin_lock_init(&priv->lock);
- dev->open = ubi32_eth_open;
- dev->stop = ubi32_eth_close;
- dev->hard_start_xmit = ubi32_eth_start_xmit;
- dev->tx_timeout = ubi32_eth_tx_timeout;
- dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT;
+ dev->netdev_ops = &ubi32_netdev_ops;
- dev->set_config = ubi32_eth_set_config;
- dev->do_ioctl = ubi32_eth_ioctl;
- dev->get_stats = ubi32_eth_get_stats;
- dev->change_mtu = ubi32_eth_change_mtu;
+ dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT;
#ifdef UBICOM32_USE_NAPI
netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT);
#endif
diff --git a/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c b/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c
index fc0d6d21b6..f14fcdfd9a 100644
--- a/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c
+++ b/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c
@@ -34,6 +34,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <linux/version.h>
#include <asm/ip5000.h>
@@ -259,8 +260,13 @@ static void ubi32_mailbox_enable_ms(struct uart_port *port)
static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart)
{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+ struct uart_state *state = uart->port.state;
+ struct tty_struct *tty = state->port.tty;
+#else
struct uart_info *info = uart->port.info;
struct tty_struct *tty = info->port.tty;
+#endif
unsigned int status, ch, flg;
status = 0; // XXX? UART_GET_LSR(uart);
@@ -308,7 +314,11 @@ static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart)
static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart)
{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+ struct circ_buf *xmit = &uart->port.state->xmit;
+#else
struct circ_buf *xmit = &uart->port.info->xmit;
+#endif
if (uart->port.x_char) {
UART_PUT_CHAR(uart, uart->port.x_char);
diff --git a/target/linux/ubicom32/patches-2.6.32/100-ubicom32_support.patch b/target/linux/ubicom32/patches-2.6.32/100-ubicom32_support.patch
new file mode 100644
index 0000000000..e16ec7ddab
--- /dev/null
+++ b/target/linux/ubicom32/patches-2.6.32/100-ubicom32_support.patch
@@ -0,0 +1,1725 @@
+--- a/drivers/char/hw_random/Kconfig
++++ b/drivers/char/hw_random/Kconfig
+@@ -186,3 +186,16 @@ config HW_RANDOM_MXC_RNGA
+ module will be called mxc-rnga.
+
+ If unsure, say Y.
++
++config HW_RANDOM_UBICOM32
++ tristate "Ubicom32 HW Random Number Generator support"
++ depends on HW_RANDOM && UBICOM32
++ default HW_RANDOM
++ ---help---
++ This driver provides kernel-side support for the Random Number
++ Generator hardware found on Ubicom32 processors.
++
++ To compile this driver as a module, choose M here: the
++ module will be called pasemi-rng.
++
++ If unsure, say Y.
+--- a/drivers/char/hw_random/Makefile
++++ b/drivers/char/hw_random/Makefile
+@@ -18,3 +18,4 @@ obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio
+ obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
+ obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
+ obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
++obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -61,6 +61,40 @@ config CRYPTO_DEV_GEODE
+ To compile this driver as a module, choose M here: the module
+ will be called geode-aes.
+
++config CRYPTO_UBICOM32
++ bool "Ubicom32 Security Module"
++ depends on UBICOM32
++ help
++ This is the ubicom32 hardware acceleration common code.
++
++config CRYPTO_AES_UBICOM32
++ tristate "Ubicom32 AES implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware AES implementation.
++
++config CRYPTO_DES_UBICOM32
++ tristate "Ubicom32 DES implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware DES and 3DES implementation.
++
++config CRYPTO_SHA1_UBICOM32
++ tristate "Ubicom32 SHA1 implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware SHA1 implementation.
++
++config CRYPTO_MD5_UBICOM32
++ tristate "Ubicom32 MD5 implementation"
++ depends on CRYPTO_UBICOM32
++ select CRYPTO_ALGAPI
++ help
++ This is the ubicom32 hardware MD5 implementation.
++
+ config ZCRYPT
+ tristate "Support for PCI-attached cryptographic adapters"
+ depends on S390
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -382,3 +382,10 @@ config MMC_VIA_SDMMC
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
++
++config MMC_UBICOM32
++ tristate "Ubicom32 MMC/SD host controller"
++ depends on UBICOM32
++ help
++ This provides support for the SD/MMC hardware found on Ubicom32
++ IP7K processors
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
+ obj-$(CONFIG_GPIOMMC) += gpiommc.o
++obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o
+
+ ifeq ($(CONFIG_CB710_DEBUG),y)
+ CFLAGS-cb710-mmc += -DDEBUG
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -114,6 +114,31 @@ config MTD_SST25L
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning.
+
++config MTD_UBI32_NAND_SPI_ER
++ tristate "UBI32_NAND SPI-ER support"
++ help
++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
++ using the built in flash controller on the Ubicom32 architecture.
++ Partial page writes are not supported by this driver.
++
++config MTD_NAND_SPI_ER
++ tristate "NAND SPI-ER support"
++ help
++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip
++ using a generic SPI bus. Partial page writes are supported
++ by this driver.
++
++config MTD_UBI32_M25P80
++ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)"
++ depends on UBICOM32
++ default y
++ help
++ This enables access to most modern SPI flash chips, used for
++ program and data storage. Series supported include Atmel AT26DF,
++ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
++ are supported as well. See the driver source for the current list,
++ or to add other chips.
++
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -17,3 +17,6 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
+ obj-$(CONFIG_MTD_SST25L) += sst25l.o
++obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o
++obj-$(CONFIG_MTD_NAND_SPI_ER) += nand-spi-er.o
++obj-$(CONFIG_MTD_UBI32_NAND_SPI_ER) += ubi32-nand-spi-er.o
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2608,6 +2608,19 @@ config S6GMAC
+
+ source "drivers/net/stmmac/Kconfig"
+
++config UBICOM32_GMAC
++ tristate "Ubicom Gigabit Ethernet support"
++ depends on UBICOM32
++ help
++ Gigabit Ethernet support for ubicom32 processors
++
++config UBICOM32_OCM_FOR_SKB
++ bool "USE OCM for SKB (EXPERIMENTAL)"
++ depends on UBICOM32_GMAC
++ default n
++ help
++ Allocate skb from OCM for Ethernet Receive when possible
++
+ endif # NETDEV_1000
+
+ #
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -286,3 +286,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+ obj-$(CONFIG_SFC) += sfc/
+
+ obj-$(CONFIG_WIMAX) += wimax/
++
++obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o
+--- a/drivers/net/usb/asix.c
++++ b/drivers/net/usb/asix.c
+@@ -319,14 +319,33 @@ static int asix_rx_fixup(struct usbnet *
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
++ if ((skb->len) - ((size + 1) & 0xfffe) == 0) {
++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (((u32)packet & 0x02) == 0) {
++ memmove(packet - 2, packet, size);
++ skb->data -= 2;
++ skb->tail -= 2;
++ }
++#endif
+ return 2;
++ }
++
+ if (size > ETH_FRAME_LEN) {
+ deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (((u32)packet & 0x02) == 0) {
++ memmove(packet - 2, packet, size);
++ ax_skb->data = packet - 2;
++ } else {
++ ax_skb->data = packet;
++ }
++#else
++ ax_skb->data = packet;
++#endif
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ skb_set_tail_pointer(ax_skb, size);
+@@ -1125,13 +1144,19 @@ static int ax88178_link_reset(struct usb
+ mode = AX88178_MEDIUM_DEFAULT;
+
+ if (ecmd.speed == SPEED_1000)
++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ mode |= AX_MEDIUM_GM;
++#else
++ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
++#endif
+ else if (ecmd.speed == SPEED_100)
+ mode |= AX_MEDIUM_PS;
+ else
+ mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+ mode |= AX_MEDIUM_ENCK;
++#endif
+
+ if (ecmd.duplex == DUPLEX_FULL)
+ mode |= AX_MEDIUM_FD;
+--- a/drivers/oprofile/cpu_buffer.c
++++ b/drivers/oprofile/cpu_buffer.c
+@@ -327,10 +327,10 @@ static inline void oprofile_end_trace(st
+ }
+
+ static inline void
+-__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+- unsigned long event, int is_kernel)
++__oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
++ unsigned long event, int is_kernel, int cpu)
+ {
+- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
++ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
+ unsigned long backtrace = oprofile_backtrace_depth;
+
+ /*
+@@ -352,7 +352,8 @@ __oprofile_add_ext_sample(unsigned long
+ void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel)
+ {
+- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
++ __oprofile_add_ext_sample_cpu(pc, regs, event,
++ is_kernel, smp_processor_id());
+ }
+
+ void oprofile_add_sample(struct pt_regs * const regs, unsigned long event)
+@@ -360,7 +361,8 @@ void oprofile_add_sample(struct pt_regs
+ int is_kernel = !user_mode(regs);
+ unsigned long pc = profile_pc(regs);
+
+- __oprofile_add_ext_sample(pc, regs, event, is_kernel);
++ __oprofile_add_ext_sample_cpu(pc, regs, event,
++ is_kernel, smp_processor_id());
+ }
+
+ /*
+--- a/drivers/pci/Makefile
++++ b/drivers/pci/Makefile
+@@ -47,8 +47,8 @@ obj-$(CONFIG_PPC) += setup-bus.o
+ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
+ obj-$(CONFIG_X86_VISWS) += setup-irq.o
+ obj-$(CONFIG_MN10300) += setup-bus.o
++obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o
+
+-#
+ # ACPI Related PCI FW Functions
+ #
+ obj-$(CONFIG_ACPI) += pci-acpi.o
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -879,6 +879,57 @@ config SERIAL_UARTLITE_CONSOLE
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
++config SERIAL_UBI32_UARTTIO
++ tristate "Ubicom UARTTIO support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default y
++ help
++ Add support for the Ubicom virtual peripherial serial interface.
++
++config SERIAL_UBI32_UARTTIO_NR_UARTS
++ int "Maximum number of UARTTIO virtual serial ports"
++ depends on SERIAL_UBI32_UARTTIO
++ default "4"
++ help
++ Set this to the maximum number of serial ports you want the driver to support.
++
++config SERIAL_UBI32_UARTTIO_CONSOLE
++ tristate "Ubicom UARTTIO console support"
++ depends on SERIAL_UBI32_UARTTIO=y
++ select SERIAL_CORE_CONSOLE
++ default y
++ help
++ Add support for console on the Ubicom virtual peripherial serial interface.
++
++config SERIAL_UBI32_SERDES
++ bool "Ubicom serial port support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default y
++ help
++ Add support for the Ubicom serial interface.
++
++config SERIAL_UBI32_SERDES_CONSOLE
++ bool "Ubicom serial console support"
++ depends on SERIAL_UBI32_SERDES=y
++ select SERIAL_CORE_CONSOLE
++ default y
++
++config SERIAL_UBI32_MAILBOX
++ bool "Ubicom mailbox support"
++ depends on UBICOM32=y
++ select SERIAL_CORE
++ default n
++ help
++ Add support for the Ubicom mailbox interface.
++
++config SERIAL_UBI32_MAILBOX_CONSOLE
++ bool "Ubicom mailbox console support"
++ depends on SERIAL_UBI32_MAILBOX=y
++ select SERIAL_CORE_CONSOLE
++ default y
++
+ config SERIAL_SUNCORE
+ bool
+ depends on SPARC
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -81,3 +81,6 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
+ obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
+ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
++obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o
++obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o
++obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -214,6 +214,15 @@ config SPI_S3C24XX
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs
+
++config SPI_UBICOM32_GPIO
++ tristate "Ubicom32 SPI over GPIO"
++ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL
++ select SPI_BITBANG
++ select HAS_DMA
++ help
++ SPI driver for the Ubicom32 architecture using
++ GPIO lines to provide the SPI bus.
++
+ config SPI_S3C24XX_GPIO
+ tristate "Samsung S3C24XX series SPI by GPIO"
+ depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52x
+ obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o
+ obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
+ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
++obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
+ obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+--- a/drivers/uio/Kconfig
++++ b/drivers/uio/Kconfig
+@@ -94,4 +94,12 @@ config UIO_PCI_GENERIC
+ primarily, for virtualization scenarios.
+ If you compile this as a module, it will be called uio_pci_generic.
+
++config UIO_UBICOM32RING
++ tristate "Ubicom32 Ring Buffer driver"
++ default n
++ help
++ Userspace I/O interface for a Ubicom32 Ring Buffer.
++
++ If you compile this as a module, it will be called uio_ubicom32ring
++
+ endif
+--- a/drivers/uio/Makefile
++++ b/drivers/uio/Makefile
+@@ -6,3 +6,4 @@ obj-$(CONFIG_UIO_SMX) += uio_smx.o
+ obj-$(CONFIG_UIO_AEC) += uio_aec.o
+ obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
+ obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o
++obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o
+--- a/drivers/usb/gadget/epautoconf.c
++++ b/drivers/usb/gadget/epautoconf.c
+@@ -154,6 +154,10 @@ ep_matches (
+ /* configure your hardware with enough buffering!! */
+ }
+ break;
++
++ case USB_ENDPOINT_XFER_BULK:
++ if ((gadget->is_dualspeed) && (ep->maxpacket < 512))
++ return 0;
+ }
+
+ /* MATCH!! */
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD
+ default y if PCMCIA && !M32R # sl811_cs
+ default y if ARM # SL-811
+ default y if SUPERH # r8a66597-hcd
++ default y if UBICOM32 # Ubicom's onchip USB Duial role controller
+ default PCI
+
+ # many non-PCI SOC chips embed OHCI
+--- a/drivers/usb/musb/Kconfig
++++ b/drivers/usb/musb/Kconfig
+@@ -14,7 +14,7 @@ config USB_MUSB_HDRC
+ select TWL4030_USB if MACH_OMAP_3430SDP
+ select NOP_USB_XCEIV if MACH_OMAP3EVM
+ select USB_OTG_UTILS
+- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
++ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, Ubicom, ...)'
+ help
+ Say Y here if your system has a dual role high speed USB
+ controller based on the Mentor Graphics silicon IP. Then
+--- a/drivers/usb/musb/Makefile
++++ b/drivers/usb/musb/Makefile
+@@ -30,6 +30,10 @@ ifeq ($(CONFIG_BF52x),y)
+ musb_hdrc-objs += blackfin.o
+ endif
+
++ifeq ($(CONFIG_UBICOM32), y)
++ musb_hdrc-objs += ubi32_usb.o
++endif
++
+ ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+ musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
+ endif
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -105,6 +105,13 @@
+ #include <asm/mach-types.h>
+ #endif
+
++#ifdef CONFIG_UBICOM32
++#include <asm/ip5000.h>
++#include <asm/ubicom32-tio.h>
++extern void ubi32_usb_init(void);
++extern void ubi32_usb_int_clr(void);
++#endif
++
+ #include "musb_core.h"
+
+
+@@ -148,8 +155,37 @@ static inline struct musb *dev_to_musb(s
+ }
+
+ /*-------------------------------------------------------------------------*/
++#if defined(CONFIG_UBICOM32)
++
++/*
++ * Load an endpoint's FIFO
++ */
++void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource)
++{
++ void __iomem *fifo = hw_ep->fifo;
++
++ prefetch((u8 *)pSource);
++
++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
++ 'T', hw_ep->epnum, fifo, wCount, pSource);
++
++ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount);
++
++}
++
++/*
++ * Unload an endpoint's FIFO
++ */
++void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest)
++{
++
++ void __iomem *fifo = hw_ep->fifo;
++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
++ 'R', hw_ep->epnum, fifo, wCount, pDest);
++ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount);
++}
+
+-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
++#elif !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+
+ /*
+ * Load an endpoint's FIFO
+@@ -228,8 +264,7 @@ void musb_read_fifo(struct musb_hw_ep *h
+ readsb(fifo, dst, len);
+ }
+ }
+-
+-#endif /* normal PIO */
++#endif /* !T6010 && !BLACKFIN */
+
+
+ /*-------------------------------------------------------------------------*/
+@@ -890,12 +925,19 @@ void musb_start(struct musb *musb)
+ musb_writeb(regs, MUSB_TESTMODE, 0);
+
+ /* put into basic highspeed mode and start session */
++#ifndef CONFIG_UBICOM32
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+ | MUSB_POWER_SOFTCONN
+ | MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
++#else
++ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB
++ /* ENSUSPEND wedges tusb */
++ /* | MUSB_POWER_ENSUSPEND */
++ );
++#endif
+
+ musb->is_active = 0;
+ devctl = musb_readb(regs, MUSB_DEVCTL);
+@@ -1096,6 +1138,7 @@ static struct fifo_cfg __initdata mode_4
+ };
+
+
++#ifndef CONFIG_UBICOM32
+ /*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+@@ -1255,7 +1298,7 @@ static int __init ep_config_from_table(s
+
+ return 0;
+ }
+-
++#endif /* CONFIG_UBICOM32 */
+
+ /*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+@@ -1271,6 +1314,11 @@ static int __init ep_config_from_hw(stru
+ DBG(2, "<== static silicon ep config\n");
+
+ /* FIXME pick up ep0 maxpacket size */
++#ifdef CONFIG_UBICOM32
++ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/
++ hw_ep = musb->endpoints;
++ hw_ep->is_shared_fifo = true;
++#endif
+
+ for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+ musb_ep_select(mbase, epnum);
+@@ -1291,14 +1339,27 @@ static int __init ep_config_from_hw(stru
+ /* REVISIT: this algorithm is lazy, we should at least
+ * try to pick a double buffered endpoint.
+ */
++#ifndef CONFIG_UBICOM32
+ if (musb->bulk_ep)
+ continue;
+ musb->bulk_ep = hw_ep;
++#else
++ if ((musb->bulk_ep_in) && (musb->bulk_ep_out))
++ continue;
++ /* Save theEP with 1024 Bytes FIFO for ISO */
++ if(hw_ep->max_packet_sz_tx == 512) {
++ if (!musb->bulk_ep_in) {
++ musb->bulk_ep_in = hw_ep;
++ } else if (!musb->bulk_ep_out) {
++ musb->bulk_ep_out = hw_ep;
++ }
++ }
++#endif /* CONFIG_UBICOM32 */
+ #endif
+ }
+
+ #ifdef CONFIG_USB_MUSB_HDRC_HCD
+- if (!musb->bulk_ep) {
++ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) {
+ pr_debug("%s: missing bulk\n", musb_driver_name);
+ return -EINVAL;
+ }
+@@ -1407,12 +1468,16 @@ static int __init musb_core_init(u16 mus
+ musb->epmask = 1;
+
+ if (reg & MUSB_CONFIGDATA_DYNFIFO) {
++#ifndef CONFIG_UBICOM32
+ if (musb->config->dyn_fifo)
+ status = ep_config_from_table(musb);
+- else {
++ else
++#endif
++ {
+ ERR("reconfigure software for Dynamic FIFOs\n");
+ status = -ENODEV;
+ }
++
+ } else {
+ if (!musb->config->dyn_fifo)
+ status = ep_config_from_hw(musb);
+@@ -1476,8 +1541,8 @@ static int __init musb_core_init(u16 mus
+
+ /*-------------------------------------------------------------------------*/
+
+-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+-
++#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32)
++static u32_t musb_int_count = 0;
+ static irqreturn_t generic_interrupt(int irq, void *__hci)
+ {
+ unsigned long flags;
+@@ -1486,10 +1551,17 @@ static irqreturn_t generic_interrupt(int
+
+ spin_lock_irqsave(&musb->lock, flags);
+
++#ifndef CONFIG_UBICOM32
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
++#else
++ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx);
++ //ubi32_usb_int_clr();
++ musb_int_count++;
++#endif
+
++ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx);
+ if (musb->int_usb || musb->int_tx || musb->int_rx)
+ retval = musb_interrupt(musb);
+
+@@ -2241,6 +2313,10 @@ static struct platform_driver musb_drive
+
+ static int __init musb_init(void)
+ {
++#ifdef CONFIG_UBICOM32
++ ubi32_usb_init();
++#endif
++
+ #ifdef CONFIG_USB_MUSB_HDRC_HCD
+ if (usb_disabled())
+ return 0;
+--- a/drivers/usb/musb/musb_core.h
++++ b/drivers/usb/musb/musb_core.h
+@@ -339,7 +339,12 @@ struct musb {
+ * queue until it completes or NAKs too much; then we try the next
+ * endpoint.
+ */
++#ifdef CONFIG_UBICOM32
++ struct musb_hw_ep *bulk_ep_in;
++ struct musb_hw_ep *bulk_ep_out;
++#else
+ struct musb_hw_ep *bulk_ep;
++#endif
+
+ struct list_head control; /* of musb_qh */
+ struct list_head in_bulk; /* of musb_qh */
+--- a/drivers/usb/musb/musb_gadget.c
++++ b/drivers/usb/musb/musb_gadget.c
+@@ -434,7 +434,7 @@ void musb_g_tx(struct musb *musb, u8 epn
+ * probably rates reporting as a host error
+ */
+ if (csr & MUSB_TXCSR_P_SENTSTALL) {
+- csr |= MUSB_TXCSR_P_WZC_BITS;
++ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~MUSB_TXCSR_P_SENTSTALL;
+ musb_writew(epio, MUSB_TXCSR, csr);
+ break;
+@@ -442,7 +442,7 @@ void musb_g_tx(struct musb *musb, u8 epn
+
+ if (csr & MUSB_TXCSR_P_UNDERRUN) {
+ /* we NAKed, no big deal ... little reason to care */
+- csr |= MUSB_TXCSR_P_WZC_BITS;
++ csr &= ~(MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~(MUSB_TXCSR_P_UNDERRUN
+ | MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR, csr);
+@@ -577,12 +577,18 @@ static void rxstate(struct musb *musb, s
+ {
+ const u8 epnum = req->epnum;
+ struct usb_request *request = &req->request;
+- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
++ struct musb_ep *musb_ep = NULL;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+- unsigned fifo_count = 0;
+- u16 len = musb_ep->packet_sz;
++ u16 fifo_count = 0;
++ u16 len = 0;
+ u16 csr = musb_readw(epio, MUSB_RXCSR);
+
++ if (musb->endpoints[epnum].is_shared_fifo)
++ musb_ep = &musb->endpoints[epnum].ep_in;
++ else
++ musb_ep = &musb->endpoints[epnum].ep_out;
++ len = musb_ep->packet_sz;
++
+ /* We shouldn't get here while DMA is active, but we do... */
+ if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+ DBG(4, "DMA pending...\n");
+@@ -730,7 +736,7 @@ static void rxstate(struct musb *musb, s
+ */
+
+ /* ack the read! */
+- csr |= MUSB_RXCSR_P_WZC_BITS;
++ csr &= ~MUSB_RXCSR_P_WZC_BITS;
+ csr &= ~MUSB_RXCSR_RXPKTRDY;
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
+@@ -749,10 +755,15 @@ void musb_g_rx(struct musb *musb, u8 epn
+ u16 csr;
+ struct usb_request *request;
+ void __iomem *mbase = musb->mregs;
+- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
++ struct musb_ep *musb_ep = NULL;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+ struct dma_channel *dma;
+
++ if (musb->endpoints[epnum].is_shared_fifo)
++ musb_ep = &musb->endpoints[epnum].ep_in;
++ else
++ musb_ep = &musb->endpoints[epnum].ep_out;
++
+ musb_ep_select(mbase, epnum);
+
+ request = next_request(musb_ep);
+@@ -1756,7 +1767,9 @@ int usb_gadget_register_driver(struct us
+ }
+ }
+ }
+-
++#ifndef CONFIG_USB_MUSB_OTG
++ musb_pullup(musb, 1);
++#endif
+ return retval;
+ }
+ EXPORT_SYMBOL(usb_gadget_register_driver);
+--- a/drivers/usb/musb/musb_gadget_ep0.c
++++ b/drivers/usb/musb/musb_gadget_ep0.c
+@@ -241,14 +241,14 @@ __acquires(musb->lock)
+ case USB_REQ_SET_ADDRESS:
+ /* change it after the status stage */
+ musb->set_address = true;
+- musb->address = (u8) (ctrlrequest->wValue & 0x7f);
++ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f);
+ handled = 1;
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+- if (ctrlrequest->wValue
++ if (le16_to_cpu(ctrlrequest->wValue)
+ != USB_DEVICE_REMOTE_WAKEUP)
+ break;
+ musb->may_wakeup = 0;
+@@ -262,8 +262,8 @@ __acquires(musb->lock)
+
+ if (num == 0
+ || num >= MUSB_C_NUM_EPS
+- || ctrlrequest->wValue
+- != USB_ENDPOINT_HALT)
++ || le16_to_cpu(ctrlrequest->wValue
++ != USB_ENDPOINT_HALT))
+ break;
+
+ if (ctrlrequest->wIndex & USB_DIR_IN)
+@@ -293,7 +293,7 @@ __acquires(musb->lock)
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+ handled = 1;
+- switch (ctrlrequest->wValue) {
++ switch (le16_to_cpu(ctrlrequest->wValue)) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ musb->may_wakeup = 1;
+ break;
+@@ -375,8 +375,8 @@ stall:
+
+ if (epnum == 0
+ || epnum >= MUSB_C_NUM_EPS
+- || ctrlrequest->wValue
+- != USB_ENDPOINT_HALT)
++ || le16_to_cpu(ctrlrequest->wValue
++ != USB_ENDPOINT_HALT))
+ break;
+
+ ep = musb->endpoints + epnum;
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -160,7 +160,11 @@ static inline void musb_h_tx_start(struc
+ /* NOTE: no locks here; caller should lock and select EP */
+ if (ep->epnum) {
+ txcsr = musb_readw(ep->regs, MUSB_TXCSR);
++#ifndef CONFIG_UBICOM32
+ txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
++#else
++ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS));
++#endif
+ musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+ } else {
+ txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+@@ -235,6 +239,8 @@ musb_start_urb(struct musb *musb, int is
+ break;
+ default: /* bulk, interrupt */
+ /* actual_length may be nonzero on retry paths */
++ if (urb->actual_length)
++ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length);
+ buf = urb->transfer_buffer + urb->actual_length;
+ len = urb->transfer_buffer_length - urb->actual_length;
+ }
+@@ -532,7 +538,11 @@ musb_host_packet_rx(struct musb *musb, s
+ musb_read_fifo(hw_ep, length, buf);
+
+ csr = musb_readw(epio, MUSB_RXCSR);
++#ifndef CONFIG_UBICOM32
+ csr |= MUSB_RXCSR_H_WZC_BITS;
++#else
++ csr &= ~MUSB_RXCSR_H_WZC_BITS;
++#endif
+ if (unlikely(do_flush))
+ musb_h_flush_rxfifo(hw_ep, csr);
+ else {
+@@ -566,6 +576,7 @@ musb_rx_reinit(struct musb *musb, struct
+
+ /* if programmed for Tx, put it in RX mode */
+ if (ep->is_shared_fifo) {
++#ifndef CONFIG_UBICOM32
+ csr = musb_readw(ep->regs, MUSB_TXCSR);
+ if (csr & MUSB_TXCSR_MODE) {
+ musb_h_tx_flush_fifo(ep);
+@@ -580,7 +591,18 @@ musb_rx_reinit(struct musb *musb, struct
+ */
+ if (csr & MUSB_TXCSR_DMAMODE)
+ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
++
++#else
++ /* clear mode (and everything else) to enable Rx */
+ musb_writew(ep->regs, MUSB_TXCSR, 0);
++ /* scrub all previous state, clearing toggle */
++ csr = musb_readw(ep->regs, MUSB_RXCSR);
++ if (csr & MUSB_RXCSR_RXPKTRDY)
++ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
++ musb_readw(ep->regs, MUSB_RXCOUNT));
++
++ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
++#endif
+
+ /* scrub all previous state, clearing toggle */
+ } else {
+@@ -1108,6 +1130,16 @@ void musb_host_tx(struct musb *musb, u8
+ void __iomem *mbase = musb->mregs;
+ struct dma_channel *dma;
+
++#ifdef CONFIG_UBICOM32
++ if (hw_ep->is_shared_fifo) {
++ qh = hw_ep->in_qh;
++ }
++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
++ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
++ dma ? ", dma" : "");
++#endif
++#endif
++
+ musb_ep_select(mbase, epnum);
+ tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+@@ -1148,9 +1180,14 @@ void musb_host_tx(struct musb *musb, u8
+ * we have a candidate... NAKing is *NOT* an error
+ */
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS
+ | MUSB_TXCSR_TXPKTRDY);
++#else
++ musb_writew(epio, MUSB_TXCSR,
++ MUSB_TXCSR_TXPKTRDY);
++#endif
+ return;
+ }
+
+@@ -1324,8 +1361,14 @@ void musb_host_tx(struct musb *musb, u8
+ qh->segsize = length;
+
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
++ musb_writew(epio, MUSB_TXCSR,
++ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
++#else
+ musb_writew(epio, MUSB_TXCSR,
+- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
++ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
++#endif
++
+ }
+
+
+@@ -1385,7 +1428,11 @@ static void musb_bulk_rx_nak_timeout(str
+
+ /* clear nak timeout bit */
+ rx_csr = musb_readw(epio, MUSB_RXCSR);
++#ifndef CONFIG_UBICOM32
+ rx_csr |= MUSB_RXCSR_H_WZC_BITS;
++#else
++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
++#endif
+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+@@ -1454,6 +1501,13 @@ void musb_host_rx(struct musb *musb, u8
+
+ pipe = urb->pipe;
+
++#ifdef CONFIG_UBICOM32
++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
++ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
++ xfer_len, dma ? ", dma" : "");
++#endif
++#endif
++
+ DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+ epnum, rx_csr, urb->actual_length,
+ dma ? dma->actual_len : 0);
+@@ -1492,8 +1546,15 @@ void musb_host_rx(struct musb *musb, u8
+ return;
+ }
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+ rx_csr &= ~MUSB_RXCSR_DATAERROR;
++#else
++ /* NEED TO EVALUATE CHANGE */
++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS;
++ rx_csr &= ~MUSB_RXCSR_DATAERROR;
++// musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT);
++#endif
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+ goto finish;
+@@ -1554,8 +1615,13 @@ void musb_host_rx(struct musb *musb, u8
+ rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+ musb_ep_select(mbase, epnum);
++#ifndef CONFIG_UBICOM32
+ musb_writew(epio, MUSB_RXCSR,
+ MUSB_RXCSR_H_WZC_BITS | rx_csr);
++#else
++ musb_writew(epio, MUSB_RXCSR,
++ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr);
++#endif
+ }
+ #endif
+ if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+@@ -1585,7 +1651,7 @@ void musb_host_rx(struct musb *musb, u8
+ else
+ done = false;
+
+- } else {
++ } else {
+ /* done if urb buffer is full or short packet is recd */
+ done = (urb->actual_length + xfer_len >=
+ urb->transfer_buffer_length
+@@ -1799,7 +1865,11 @@ static int musb_schedule(
+ if (musb_ep_get_qh(hw_ep, is_in) != NULL)
+ continue;
+
++#ifndef CONFIG_UBICOM32
+ if (hw_ep == musb->bulk_ep)
++#else
++ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */
++#endif
+ continue;
+
+ if (is_in)
+@@ -1813,7 +1883,14 @@ static int musb_schedule(
+ best_end = epnum;
+ }
+ }
++
++#ifdef CONFIG_UBICOM32
++ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in)))
++ best_end = -1;
++#endif
++
+ /* use bulk reserved ep1 if no other ep is free */
++#ifndef CONFIG_UBICOM32
+ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+ hw_ep = musb->bulk_ep;
+ if (is_in)
+@@ -1835,6 +1912,22 @@ static int musb_schedule(
+ } else if (best_end < 0) {
+ return -ENOSPC;
+ }
++#else
++ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
++ /* hw_ep = musb->bulk_ep; */
++ if (is_in) {
++ head = &musb->in_bulk;
++ hw_ep = musb->bulk_ep_in; /* UBICOM */
++ }
++ else {
++ head = &musb->out_bulk;
++ hw_ep = musb->bulk_ep_out; /* UBICOM */
++ }
++ goto success;
++ } else if (best_end < 0) {
++ return -ENOSPC;
++ }
++#endif
+
+ idle = 1;
+ qh->mux = 0;
+@@ -1846,6 +1939,13 @@ success:
+ list_add_tail(&qh->ring, head);
+ qh->mux = 1;
+ }
++ /*
++ * It's not make sense to set NAK timeout when qh->mux = 0,
++ * There is nothing else to schedule
++ */
++ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0))
++ qh->intv_reg = 0;
++
+ qh->hw_ep = hw_ep;
+ qh->hep->hcpriv = qh;
+ if (idle)
+@@ -1964,6 +2064,15 @@ static int musb_urb_enqueue(
+ /* ISO always uses logarithmic encoding */
+ interval = min_t(u8, epd->bInterval, 16);
+ break;
++#ifdef COMFIG_UBICOM32
++ case USB_ENDPOINT_XFER_BULK:
++ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
++ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2;
++ else
++ interval = 0;
++ break;
++#endif
++
+ default:
+ /* REVISIT we actually want to use NAK limits, hinting to the
+ * transfer scheduling logic to try some other qh, e.g. try
+--- a/drivers/usb/musb/musb_io.h
++++ b/drivers/usb/musb/musb_io.h
+@@ -58,6 +58,7 @@ static inline void writesb(const void __
+
+ #ifndef CONFIG_BLACKFIN
+
++#ifndef CONFIG_UBICOM32
+ /* NOTE: these offsets are all in bytes */
+
+ static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+@@ -72,7 +73,37 @@ static inline void musb_writew(void __io
+
+ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+ { __raw_writel(data, addr + offset); }
++#else
++#include <asm/ubicom32-tio.h>
++static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
++{
++ u16 data;
++ usb_tio_read_u16((u32)(addr + offset), &data);
++ return data;
++}
+
++static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
++{
++ u8 data;
++ usb_tio_read_u8((u32)(addr + offset), &data);
++ return data;
++}
++
++static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
++{
++ usb_tio_write_u16((u32)(addr + offset), data);
++}
++
++static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
++{
++ usb_tio_write_u8((u32)(addr + offset), data);
++}
++
++static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx)
++{
++ return usb_tio_read_int_status(int_usb, int_tx, int_rx);
++}
++#endif /* CONFIG_UBICOM32 */
+
+ #ifdef CONFIG_USB_TUSB6010
+
+@@ -106,7 +137,7 @@ static inline void musb_writeb(void __io
+ __raw_writew(tmp, addr + (offset & ~1));
+ }
+
+-#else
++#elif !defined(CONFIG_UBICOM32)
+
+ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+ { return __raw_readb(addr + offset); }
+--- a/drivers/usb/musb/musb_regs.h
++++ b/drivers/usb/musb/musb_regs.h
+@@ -167,6 +167,7 @@
+ (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+ | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
++
+ /* RXCSR in Peripheral and Host mode */
+ #define MUSB_RXCSR_AUTOCLEAR 0x8000
+ #define MUSB_RXCSR_DMAENAB 0x2000
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -100,6 +100,63 @@ config LCD_HP700
+ If you have an HP Jornada 700 series handheld (710/720/728)
+ say Y to enable LCD control driver.
+
++config LCD_UBICOM32POWER
++ tristate "Ubicom LCD power Driver"
++ depends on LCD_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ If you have a Ubicom32 based system with an LCD panel that requires
++ power control, say Y to enable the power control driver for it.
++
++config LCD_UBICOM32
++ tristate "Ubicom Backlight Driver"
++ depends on LCD_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ This driver takes care of initialization of LCD panels with
++ built in controllers.
++
++menu "Ubicom32 LCD Panel Support"
++ depends on UBICOM32 && LCD_UBICOM32
++
++config LCD_UBICOM32_TFT2N0369E_P
++ bool "TFT2N0369E (Portrait)"
++ default n
++ help
++ Support for TFT2N0369 in portrait mode
++
++config LCD_UBICOM32_TFT2N0369E_L
++ bool "TFT2N0369E (Landscape)"
++ default n
++ help
++ Support for TFT2N0369 in landscape mode
++
++config LCD_UBICOM32_CFAF240320KTTS
++ bool "CFAF240320KTTS"
++ default n
++ help
++ Support for CFAF240320KTTS
++
++config LCD_UBICOM32_CFAF240320KTTS_180
++ bool "CFAF240320KTTS (180 rotation)"
++ default n
++ help
++ Support for CFAF240320KTTS rotated 180 degrees
++
++config LCD_UBICOM32_CFAF240320D
++ bool "CFAF240320D"
++ default n
++ help
++ Support for CFAF240320D
++
++config LCD_UBICOM32_CFAF320240F
++ bool "CFAF320240F"
++ default n
++ help
++ Support for CFAF320240F
++
++endmenu
++
+ #
+ # Backlight
+ #
+@@ -262,3 +319,11 @@ config BACKLIGHT_ADP5520
+ To compile this driver as a module, choose M here: the module will
+ be called adp5520_bl.
+
++config BACKLIGHT_UBICOM32
++ tristate "Ubicom Backlight Driver"
++ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32
++ default n
++ help
++ If you have a Ubicom32 based system with a backlight say Y to enable the
++ backlight driver.
++
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -10,6 +10,9 @@ obj-$(CONFIG_LCD_PLATFORM) += platfor
+ obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
+ obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
+ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++obj-$(CONFIG_LCD_UBICOM32POWER) += ubicom32lcdpower.o
++obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o
+
+ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+ obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
+@@ -28,4 +31,4 @@ obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886
+ obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
+ obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
+ obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
+-
++obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -611,6 +611,50 @@ config FB_BFIN_T350MCQB
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
++config FB_UBICOM32
++ tristate "Ubicom32 Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ help
++ This is the framebuffer device driver for the Ubicom32 architecture.
++ You can configure video memory by using kernel command line parameters, for example:
++ video=ubicomfb:vram_size=512,init_value=0xffff
++
++config FB_UBICOM32_PLIO80
++ tristate "Ubicom32 80 Bus PLIO Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ select UBICOM32_PLIO
++ help
++ This is a framebuffer device driver for the Ubicom32 architecture.
++ You can configure the xres, yres and vram size (in kilobytes) by using
++ kernel command line parameters, for example:
++ video=ubicom32vfb:xres=320,yres=240,vram_size=512
++
++config FB_UBICOM32_VIRTUAL
++ tristate "Ubicom32 Virtual Frame Buffer driver"
++ depends on FB && UBICOM32
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ select FONT_6x11 if FRAMEBUFFER_CONSOLE
++ help
++ This is a virtual framebuffer device driver for the Ubicom32 architecture.
++ You can configure the xres, yres and vram size (in kilobytes) by using
++ kernel command line parameters, for example:
++ video=ubicom32vfb:xres=320,yres=240,vram_size=512
++
++config FB_UBICOM32_VIRTUAL_NOAUTO
++ bool "Do not automatically load"
++ depends on FB_UBICOM32_VIRTUAL
++ help
++ Select this option to prevent the VFB from automatically loading at boot.
+
+ config FB_STI
+ tristate "HP STI frame buffer device support"
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -140,6 +140,10 @@ obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin
+ obj-$(CONFIG_FB_MX3) += mx3fb.o
+ obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
+
++obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o
++obj-$(CONFIG_FB_UBICOM32_PLIO80) += ubicom32plio80.o
++obj-$(CONFIG_FB_UBICOM32_VIRTUAL) += ubicom32vfb.o
++
+ # the test framebuffer is last
+ obj-$(CONFIG_FB_VIRTUAL) += vfb.o
+
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -973,6 +973,19 @@ config WATCHDOG_RIO
+ machines. The watchdog timeout period is normally one minute but
+ can be changed with a boot-time parameter.
+
++# Ubicom32
++
++config UBI32_WDT
++ tristate "Ubicom32 Hardware Watchdog support"
++ depends on UBICOM32
++ ---help---
++ If you say yes here you will get support for the Ubicom32 On-Chip
++ Watchdog Timer. If you have one of these processors and wish to
++ have watchdog support enabled, say Y, otherwise say N.
++
++ To compile this driver as a module, choose M here: the
++ module will be called ubi32_wdt.
++
+ # XTENSA Architecture
+
+ #
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -139,6 +139,9 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
+ obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
+ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
+
++# Ubicom32 Architecture
++obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o
++
+ # XTENSA Architecture
+
+ # Architecture Independant
+--- a/fs/binfmt_flat.c
++++ b/fs/binfmt_flat.c
+@@ -67,6 +67,11 @@
+ #define FLAT_DATA_ALIGN (sizeof(void *))
+ #endif
+
++#ifndef ARCH_FLAT_ALIGN
++#undef FLAT_DATA_ALIGN
++#define FLAT_DATA_ALIGN ARCH_FLAT_ALIGN
++#endif
++
+ #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
+ #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
+
+@@ -434,6 +439,7 @@ static int load_flat_file(struct linux_b
+ loff_t fpos;
+ unsigned long start_code, end_code;
+ int ret;
++ int flush_happened = 0;
+
+ hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
+ inode = bprm->file->f_path.dentry->d_inode;
+@@ -520,6 +526,7 @@ static int load_flat_file(struct linux_b
+ /* OK, This is the point of no return */
+ set_personality(PER_LINUX_32BIT);
+ setup_new_exec(bprm);
++ flush_happened = 1;
+ }
+
+ /*
+@@ -534,6 +541,12 @@ static int load_flat_file(struct linux_b
+ * it all together.
+ */
+ if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) {
++
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ printk("Unable to mmap rom with ARCH alignment requirements\n");
++ ret = -ENOEXEC;
++ goto err;
++#endif
+ /*
+ * this should give us a ROM ptr, but if it doesn't we don't
+ * really care
+@@ -552,7 +565,7 @@ static int load_flat_file(struct linux_b
+ goto err;
+ }
+
+- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
++ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
+ len = PAGE_ALIGN(len);
+ down_write(&current->mm->mmap_sem);
+ realdatastart = do_mmap(0, 0, len,
+@@ -571,6 +584,7 @@ static int load_flat_file(struct linux_b
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
++ //datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
+
+ DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
+ (int)(data_len + bss_len + stack_len), (int)datapos);
+@@ -599,7 +613,11 @@ static int load_flat_file(struct linux_b
+ memp_size = len;
+ } else {
+
+- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
++ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN);
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ /* Reserve space for the text alignment. */
++ len += FLAT_DATA_ALIGN;
++#endif
+ len = PAGE_ALIGN(len);
+ down_write(&current->mm->mmap_sem);
+ textpos = do_mmap(0, 0, len,
+@@ -615,10 +633,17 @@ static int load_flat_file(struct linux_b
+ goto err;
+ }
+
++ memp = textpos;
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ textpos = ALIGN(textpos + sizeof(struct flat_hdr), FLAT_DATA_ALIGN) - sizeof(struct flat_hdr);
++#endif
+ realdatastart = textpos + ntohl(hdr->data_start);
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
++// datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN);
++// reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
++// ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN));
+
+ reloc = (unsigned long *)
+ (datapos + (ntohl(hdr->reloc_start) - text_len));
+@@ -658,7 +683,7 @@ static int load_flat_file(struct linux_b
+ }
+ if (IS_ERR_VALUE(result)) {
+ printk("Unable to read code+data+bss, errno %d\n",(int)-result);
+- do_munmap(current->mm, textpos, text_len + data_len + extra +
++ do_munmap(current->mm, memp, text_len + data_len + extra +
+ MAX_SHARED_LIBS * sizeof(unsigned long));
+ ret = result;
+ goto err;
+@@ -671,6 +696,9 @@ static int load_flat_file(struct linux_b
+
+ /* The main program needs a little extra setup in the task structure */
+ start_code = textpos + sizeof (struct flat_hdr);
++#ifdef ARCH_FLAT_ALIGN_TEXT
++ BUG_ON(ALIGN(start_code, FLAT_DATA_ALIGN) != start_code);
++#endif
+ end_code = textpos + text_len;
+ if (id == 0) {
+ current->mm->start_code = start_code;
+@@ -799,6 +827,13 @@ static int load_flat_file(struct linux_b
+
+ return 0;
+ err:
++ if (flush_happened) {
++ /*
++ * The parent process has already started running. We cannot allow the child to return back to user space
++ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child.
++ */
++ do_exit(SIGTERM);
++ }
+ return ret;
+ }
+
+--- a/fs/Kconfig.binfmt
++++ b/fs/Kconfig.binfmt
+@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF
+ config BINFMT_ELF_FDPIC
+ bool "Kernel support for FDPIC ELF binaries"
+ default y
+- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU))
++ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32)
+ help
+ ELF FDPIC binaries are based on ELF, but allow the individual load
+ segments of a binary to be located in memory independently of each
+--- a/include/asm-generic/resource.h
++++ b/include/asm-generic/resource.h
+@@ -69,13 +69,16 @@
+ /*
+ * boot-time rlimit defaults for the init task:
+ */
++#ifndef CONFIG_ELF_CORE
++#define CONFIG_USER_ELF_CORE_SIZE 0
++#endif
+ #define INIT_RLIMITS \
+ { \
+ [RLIMIT_CPU] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_FSIZE] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_DATA] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_STACK] = { _STK_LIM, _STK_LIM_MAX }, \
+- [RLIMIT_CORE] = { 0, RLIM_INFINITY }, \
++ [RLIMIT_CORE] = { CONFIG_USER_ELF_CORE_SIZE, RLIM_INFINITY }, \
+ [RLIMIT_RSS] = { RLIM_INFINITY, RLIM_INFINITY }, \
+ [RLIMIT_NPROC] = { 0, 0 }, \
+ [RLIMIT_NOFILE] = { INR_OPEN, INR_OPEN }, \
+--- a/include/linux/elf-em.h
++++ b/include/linux/elf-em.h
+@@ -41,6 +41,7 @@
+ * up with a final number.
+ */
+ #define EM_ALPHA 0x9026
++#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */
+
+ /* Bogus old v850 magic number, used by old tools. */
+ #define EM_CYGNUS_V850 0x9080
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -152,6 +152,10 @@ struct dentry;
+ #define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
+ #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
+
++#define FB_ACCEL_UBICOM32 0x0100 /* Ubicom32 */
++#define FB_ACCEL_UBICOM32_VFB 0x0101 /* Ubicom32 VFB */
++#define FB_ACCEL_UBICOM32_PLIO80 0x0102 /* Ubicom32 PLIO80 */
++
+ struct fb_fix_screeninfo {
+ char id[16]; /* identification string eg "TT Builtin" */
+ unsigned long smem_start; /* Start of frame buffer mem */
+--- a/include/linux/if_ppp.h
++++ b/include/linux/if_ppp.h
+@@ -114,14 +114,14 @@ struct pppol2tp_ioc_stats {
+ __u16 tunnel_id; /* redundant */
+ __u16 session_id; /* if zero, get tunnel stats */
+ __u32 using_ipsec:1; /* valid only for session_id == 0 */
+- aligned_u64 tx_packets;
+- aligned_u64 tx_bytes;
+- aligned_u64 tx_errors;
+- aligned_u64 rx_packets;
+- aligned_u64 rx_bytes;
+- aligned_u64 rx_seq_discards;
+- aligned_u64 rx_oos_packets;
+- aligned_u64 rx_errors;
++ __u64 tx_packets;
++ __u64 tx_bytes;
++ __u64 tx_errors;
++ __u64 rx_packets;
++ __u64 rx_bytes;
++ __u64 rx_seq_discards;
++ __u64 rx_oos_packets;
++ __u64 rx_errors;
+ };
+
+ #define ifr__name b.ifr_ifrn.ifrn_name
+--- a/include/linux/oprofile.h
++++ b/include/linux/oprofile.h
+@@ -102,6 +102,8 @@ void oprofile_add_sample(struct pt_regs
+ */
+ void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+ unsigned long event, int is_kernel);
++void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs,
++ unsigned long event, int is_kernel, int cpu);
+
+ /* Use this instead when the PC value is not from the regs. Doesn't
+ * backtrace. */
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -179,6 +179,9 @@
+ /* BCM63xx family SoCs */
+ #define PORT_BCM63XX 89
+
++/* Ubicom32 */
++#define PORT_UBI32_UARTTIO 87
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -328,4 +328,14 @@ static inline void *kzalloc_node(size_t
+
+ void __init kmem_cache_init_late(void);
+
++struct kmem_cache_size_info {
++ unsigned short page;
++ unsigned short order;
++};
++
++/*
++ * get info on all the memory allocated by slab for this named cache
++ */
++extern int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data);
++
+ #endif /* _LINUX_SLAB_H */
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -844,6 +844,12 @@ config ELF_CORE
+ help
+ Enable support for generating core dumps. Disabling saves about 4k.
+
++config USER_ELF_CORE_SIZE
++ int "user core dump size (10MB to 32MB)"
++ range 10485760 33554432
++ default 16777216
++ depends on ELF_CORE
++
+ config PCSPKR_PLATFORM
+ bool "Enable PC-Speaker support" if EMBEDDED
+ depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -2945,6 +2945,9 @@ static int m_show(struct seq_file *m, vo
+ /* Used by oprofile and other similar tools. */
+ seq_printf(m, " 0x%p", mod->module_core);
+
++#ifdef ARCH_PROC_MODULES_EXTRA
++ ARCH_PROC_MODULES_EXTRA(m, mod);
++#endif
+ /* Taints info */
+ if (mod->taints)
+ seq_printf(m, " %s", module_flags(mod, buf));
+@@ -3097,8 +3100,12 @@ void print_modules(void)
+ printk(KERN_DEFAULT "Modules linked in:");
+ /* Most callers should already have preempt disabled, but make sure */
+ preempt_disable();
+- list_for_each_entry_rcu(mod, &modules, list)
++ list_for_each_entry_rcu(mod, &modules, list) {
+ printk(" %s%s", mod->name, module_flags(mod, buf));
++#ifdef ARCH_OOPS_MODULE_EXTRA
++ ARCH_OOPS_MODULE_EXTRA(mod);
++#endif
++ }
+ preempt_enable();
+ if (last_unloaded_module[0])
+ printk(" [last unloaded: %s]", last_unloaded_module);
+--- a/kernel/sched_clock.c
++++ b/kernel/sched_clock.c
+@@ -38,8 +38,7 @@
+ */
+ unsigned long long __attribute__((weak)) sched_clock(void)
+ {
+- return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+- * (NSEC_PER_SEC / HZ);
++ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
+ }
+
+ static __read_mostly int sched_clock_running;
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -690,7 +690,7 @@ config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ depends on DEBUG_KERNEL && \
+ (CRIS || M68K || M68KNOMMU || FRV || UML || \
+- AVR32 || SUPERH || BLACKFIN || MN10300) || \
++ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32) || \
+ ARCH_WANT_FRAME_POINTERS
+ default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
+ help
+--- a/mm/Makefile
++++ b/mm/Makefile
+@@ -45,3 +45,5 @@ obj-$(CONFIG_MEMORY_FAILURE) += memory-f
+ obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
+ obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
+ obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o
++
++CFLAGS_slab.o := $(PROFILING) -O2
+--- a/mm/slab.c
++++ b/mm/slab.c
+@@ -4086,6 +4086,68 @@ out:
+
+ #ifdef CONFIG_SLABINFO
+
++
++/*
++ * get info on all the memory allocated by slab for this named cache
++ */
++int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data)
++{
++ int res = 0;
++ int found = 0;
++ int node;
++ struct kmem_cache *cachep;
++ struct kmem_list3 *l3;
++ struct slab *slabp;
++
++ /* Find the cache in the chain of caches. */
++ mutex_lock(&cache_chain_mutex);
++ list_for_each_entry(cachep, &cache_chain, next) {
++ if (strcmp(cachep->name, name) == 0) {
++ found = 1;
++ break;
++ }
++ }
++ mutex_unlock(&cache_chain_mutex);
++ if (!found) {
++ return 0;
++ }
++ for_each_online_node(node) {
++ l3 = cachep->nodelists[node];
++ if (!l3)
++ continue;
++ if (res >= max_data)
++ break;
++ check_irq_on();
++ spin_lock_irq(&l3->list_lock);
++
++ list_for_each_entry(slabp, &l3->slabs_full, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
++ }
++ list_for_each_entry(slabp, &l3->slabs_partial, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
++ }
++ list_for_each_entry(slabp, &l3->slabs_free, list) {
++ if (res >= max_data)
++ break;
++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff;
++ data[res].order = cachep->gfporder;
++ res++;
++ }
++
++ spin_unlock_irq(&l3->list_lock);
++ }
++
++ return res;
++}
++
+ static void print_slabinfo_header(struct seq_file *m)
+ {
+ /*
+--- a/scripts/mod/file2alias.c
++++ b/scripts/mod/file2alias.c
+@@ -783,6 +783,15 @@ void handle_moddevtable(struct module *m
+ + sym->st_value;
+ }
+
++ /*
++ * somehow our gcc is not generating st_size correctly and set 0 for some symbols.
++ * and 0 size will break do_table since it adjust size to (size - id_size)
++ * this is to make sure st_size fall in range.
++ */
++ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) {
++ sym->st_size = info->sechdrs[sym->st_shndx].sh_size;
++ }
++
+ if (sym_is(symname, "__mod_pci_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct pci_device_id), "pci",
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -110,6 +110,8 @@ source "sound/parisc/Kconfig"
+
+ source "sound/soc/Kconfig"
+
++source "sound/ubicom32/Kconfig"
++
+ endif # SND
+
+ menuconfig SOUND_PRIME
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ubicom32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
diff --git a/target/linux/ubicom32/patches-2.6.32/110-vmlinux_lds_fix.patch b/target/linux/ubicom32/patches-2.6.32/110-vmlinux_lds_fix.patch
new file mode 100644
index 0000000000..1a14308874
--- /dev/null
+++ b/target/linux/ubicom32/patches-2.6.32/110-vmlinux_lds_fix.patch
@@ -0,0 +1,150 @@
+--- a/arch/ubicom32/kernel/vmlinux.lds.S
++++ b/arch/ubicom32/kernel/vmlinux.lds.S
+@@ -25,7 +25,6 @@
+ * arch/blackfin
+ * arch/parisc
+ */
+-#include <asm-generic/vmlinux.lds.h>
+ #include <asm/ocm_size.h>
+ #include <asm/memory_map.h>
+ #include <asm/thread_info.h>
+@@ -201,94 +200,28 @@ SECTIONS {
+ *(__ex_table)
+ __stop___ex_table = .;
+
+- *(.rodata) *(.rodata.*)
+- *(__vermagic) /* Kernel version magic */
+- *(__markers_strings)
+- *(.rodata1)
+- *(.rodata.str1.1)
+- *(__tracepoints_strings)
+-
+- /* PCI quirks */
+- __start_pci_fixups_early = . ;
+- *(.pci_fixup_early)
+- __end_pci_fixups_early = . ;
+- __start_pci_fixups_header = . ;
+- *(.pci_fixup_header)
+- __end_pci_fixups_header = . ;
+- __start_pci_fixups_final = . ;
+- *(.pci_fixup_final)
+- __end_pci_fixups_final = . ;
+- __start_pci_fixups_enable = . ;
+- *(.pci_fixup_enable)
+- __end_pci_fixups_enable = . ;
+- __start_pci_fixups_resume = . ;
+- *(.pci_fixup_resume)
+- __end_pci_fixups_resume = . ;
+- __start_pci_fixups_resume_early = . ;
+- *(.pci_fixup_resume_early)
+- __end_pci_fixups_resume_early = . ;
+- __start_pci_fixups_suspend = . ;
+- *(.pci_fixup_suspend)
+- __end_pci_fixups_suspend = . ;
+-
+- __start_builtin_fw = . ;
+- *(.builtin_fw)
+- __end_builtin_fw = . ;
+-
+-
+- /* Kernel symbol table: Normal symbols */
+- . = ALIGN(4);
+- __start___ksymtab = .;
+- *(__ksymtab)
+- __stop___ksymtab = .;
+-
+- /* Kernel symbol table: GPL-only symbols */
+- __start___ksymtab_gpl = .;
+- *(__ksymtab_gpl)
+- __stop___ksymtab_gpl = .;
+-
+- /* Kernel symbol table: Normal unused symbols */
+- __start___ksymtab_unused = .;
+- *(__ksymtab_unused)
+- __stop___ksymtab_unused = .;
+-
+- /* Kernel symbol table: GPL-only unused symbols */
+- __start___ksymtab_unused_gpl = .;
+- *(__ksymtab_unused_gpl)
+- __stop___ksymtab_unused_gpl = .;
+-
+- /* Kernel symbol table: GPL-future symbols */
+- __start___ksymtab_gpl_future = .;
+- *(__ksymtab_gpl_future)
+- __stop___ksymtab_gpl_future = .;
+-
+- /* Kernel symbol table: Normal symbols */
+- __start___kcrctab = .;
+- *(__kcrctab)
+- __stop___kcrctab = .;
+-
+- /* Kernel symbol table: GPL-only symbols */
+- __start___kcrctab_gpl = .;
+- *(__kcrctab_gpl)
+- __stop___kcrctab_gpl = .;
+-
+- /* Kernel symbol table: GPL-future symbols */
+- __start___kcrctab_gpl_future = .;
+- *(__kcrctab_gpl_future)
+- __stop___kcrctab_gpl_future = .;
++ } > TEXT
+
+- /* Kernel symbol table: strings */
+- *(__ksymtab_strings)
++ RO_DATA(16)
+
+- /* Built-in module parameters */
+- . = ALIGN(4) ;
+- __start___param = .;
+- *(__param)
+- __stop___param = .;
++ .rodata : {} > TEXT
++ .rodata1 : {} > TEXT
++ .pci_fixup : {} > TEXT
++ .builtin_fw : {} > TEXT
++ .rio_route : {} > TEXT
++ .tracedata : {} > TEXT
++ __ksymtab : {} > TEXT
++ __ksymtab_gpl : {} > TEXT
++ __ksymtab_gpl_future : {} > TEXT
++ __kcrctab_gpl : {} > TEXT
++ __kcrctab_unused : {} > TEXT
++ __kcrctab_unused_gpl : {} > TEXT
++ __kcrctab_gpl_future : {} > TEXT
++ __ksymtab_strings : {} > TEXT
++ __init_rodata : {} > TEXT
++ __param : {} > TEXT
+
+- . = ALIGN(4) ;
+- _etext = . ;
+- } > TEXT
++ _etext = .;
+
+ .data DATA_ADDR : {
+ . = ALIGN(4);
+@@ -349,12 +282,6 @@ SECTIONS {
+ PROVIDE (___eh_frame_end = .);
+ } > INIT
+
+- /DISCARD/ : {
+- EXIT_TEXT
+- EXIT_DATA
+- *(.exitcall.exit)
+- }
+-
+ .bss : {
+ . = ALIGN(4);
+ _sbss = . ;
+@@ -365,6 +292,12 @@ SECTIONS {
+ _end = . ;
+ } > BSS
+
++ /DISCARD/ : {
++ EXIT_TEXT
++ EXIT_DATA
++ *(.exitcall.exit)
++ }
++
+ NOTES > BSS
+
+ }
diff --git a/target/linux/ubicom32/patches-2.6.32/120-libgcc_func.patch b/target/linux/ubicom32/patches-2.6.32/120-libgcc_func.patch
new file mode 100644
index 0000000000..fee4ece003
--- /dev/null
+++ b/target/linux/ubicom32/patches-2.6.32/120-libgcc_func.patch
@@ -0,0 +1,419 @@
+--- a/arch/ubicom32/Makefile
++++ b/arch/ubicom32/Makefile
+@@ -60,9 +60,6 @@ cflags-$(CONFIG_UBICOM32_V4) := -march=
+ ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
+ LDFLAGS_vmlinux := $(ldflags-y)
+
+-GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name))
+-GCC_LIBS := $(GCCLIBDIR)/libgcc.a
+-
+ KBUILD_CFLAGS += $(cflags-y) -ffunction-sections
+ KBUILD_AFLAGS += $(cflags-y)
+
+@@ -84,7 +81,6 @@ core-y += arch/$(ARCH)/kernel/ \
+ drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/
+
+ libs-y += arch/$(ARCH)/lib/
+-libs-y += $(GCC_LIBS)
+
+ archclean:
+
+--- a/arch/ubicom32/lib/Makefile
++++ b/arch/ubicom32/lib/Makefile
+@@ -30,3 +30,4 @@
+ #
+
+ lib-y := checksum.o delay.o mem_ubicom32.o
++lib-y += ashldi3.o ashrdi3.o divmod.o lshrdi3.o muldi3.o
+--- /dev/null
++++ b/arch/ubicom32/lib/ashldi3.c
+@@ -0,0 +1,62 @@
++/* ashrdi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
++/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
++
++This file is part of GNU CC.
++
++GNU CC is free software; you can redistribute it and/or modify
++it under the terms of the GNU General Public License as published by
++the Free Software Foundation; either version 2, or (at your option)
++any later version.
++
++GNU CC is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++GNU General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with GNU CC; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++#define BITS_PER_UNIT 8
++
++typedef int SItype __attribute__ ((mode (SI)));
++typedef unsigned int USItype __attribute__ ((mode (SI)));
++typedef int DItype __attribute__ ((mode (DI)));
++typedef int word_type __attribute__ ((mode (__word__)));
++
++struct DIstruct {SItype high, low;};
++
++typedef union
++{
++ struct DIstruct s;
++ DItype ll;
++} DIunion;
++
++DItype
++__ashldi3 (DItype u, word_type b)
++{
++ DIunion w;
++ word_type bm;
++ DIunion uu;
++
++ if (b == 0)
++ return u;
++
++ uu.ll = u;
++
++ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
++ if (bm <= 0)
++ {
++ w.s.low = 0;
++ w.s.high = (USItype)uu.s.low << -bm;
++ }
++ else
++ {
++ USItype carries = (USItype)uu.s.low >> bm;
++ w.s.low = (USItype)uu.s.low << b;
++ w.s.high = ((USItype)uu.s.high << b) | carries;
++ }
++
++ return w.ll;
++}
+--- /dev/null
++++ b/arch/ubicom32/lib/ashrdi3.c
+@@ -0,0 +1,63 @@
++/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
++/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
++
++This file is part of GNU CC.
++
++GNU CC is free software; you can redistribute it and/or modify
++it under the terms of the GNU General Public License as published by
++the Free Software Foundation; either version 2, or (at your option)
++any later version.
++
++GNU CC is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++GNU General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with GNU CC; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++#define BITS_PER_UNIT 8
++
++typedef int SItype __attribute__ ((mode (SI)));
++typedef unsigned int USItype __attribute__ ((mode (SI)));
++typedef int DItype __attribute__ ((mode (DI)));
++typedef int word_type __attribute__ ((mode (__word__)));
++
++struct DIstruct {SItype high, low;};
++
++typedef union
++{
++ struct DIstruct s;
++ DItype ll;
++} DIunion;
++
++DItype
++__ashrdi3 (DItype u, word_type b)
++{
++ DIunion w;
++ word_type bm;
++ DIunion uu;
++
++ if (b == 0)
++ return u;
++
++ uu.ll = u;
++
++ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
++ if (bm <= 0)
++ {
++ /* w.s.high = 1..1 or 0..0 */
++ w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
++ w.s.low = uu.s.high >> -bm;
++ }
++ else
++ {
++ USItype carries = (USItype)uu.s.high << bm;
++ w.s.high = uu.s.high >> b;
++ w.s.low = ((USItype)uu.s.low >> b) | carries;
++ }
++
++ return w.ll;
++}
+--- /dev/null
++++ b/arch/ubicom32/lib/divmod.c
+@@ -0,0 +1,85 @@
++unsigned long
++udivmodsi4(unsigned long num, unsigned long den, int modwanted)
++{
++ unsigned long bit = 1;
++ unsigned long res = 0;
++
++ while (den < num && bit && !(den & (1L<<31)))
++ {
++ den <<=1;
++ bit <<=1;
++ }
++ while (bit)
++ {
++ if (num >= den)
++ {
++ num -= den;
++ res |= bit;
++ }
++ bit >>=1;
++ den >>=1;
++ }
++ if (modwanted) return num;
++ return res;
++}
++
++long
++__udivsi3 (long a, long b)
++{
++ return udivmodsi4 (a, b, 0);
++}
++
++long
++__umodsi3 (long a, long b)
++{
++ return udivmodsi4 (a, b, 1);
++}
++
++long
++__divsi3 (long a, long b)
++{
++ int neg = 0;
++ long res;
++
++ if (a < 0)
++ {
++ a = -a;
++ neg = !neg;
++ }
++
++ if (b < 0)
++ {
++ b = -b;
++ neg = !neg;
++ }
++
++ res = udivmodsi4 (a, b, 0);
++
++ if (neg)
++ res = -res;
++
++ return res;
++}
++
++long
++__modsi3 (long a, long b)
++{
++ int neg = 0;
++ long res;
++
++ if (a < 0)
++ {
++ a = -a;
++ neg = 1;
++ }
++
++ if (b < 0)
++ b = -b;
++
++ res = udivmodsi4 (a, b, 1);
++
++ if (neg)
++ res = -res;
++
++ return res;
++}
+--- /dev/null
++++ b/arch/ubicom32/lib/lshrdi3.c
+@@ -0,0 +1,62 @@
++/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
++/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
++
++This file is part of GNU CC.
++
++GNU CC is free software; you can redistribute it and/or modify
++it under the terms of the GNU General Public License as published by
++the Free Software Foundation; either version 2, or (at your option)
++any later version.
++
++GNU CC is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++GNU General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with GNU CC; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++#define BITS_PER_UNIT 8
++
++typedef int SItype __attribute__ ((mode (SI)));
++typedef unsigned int USItype __attribute__ ((mode (SI)));
++typedef int DItype __attribute__ ((mode (DI)));
++typedef int word_type __attribute__ ((mode (__word__)));
++
++struct DIstruct {SItype high, low;};
++
++typedef union
++{
++ struct DIstruct s;
++ DItype ll;
++} DIunion;
++
++DItype
++__lshrdi3 (DItype u, word_type b)
++{
++ DIunion w;
++ word_type bm;
++ DIunion uu;
++
++ if (b == 0)
++ return u;
++
++ uu.ll = u;
++
++ bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
++ if (bm <= 0)
++ {
++ w.s.high = 0;
++ w.s.low = (USItype)uu.s.high >> -bm;
++ }
++ else
++ {
++ USItype carries = (USItype)uu.s.high << bm;
++ w.s.high = (USItype)uu.s.high >> b;
++ w.s.low = ((USItype)uu.s.low >> b) | carries;
++ }
++
++ return w.ll;
++}
+--- /dev/null
++++ b/arch/ubicom32/lib/muldi3.c
+@@ -0,0 +1,87 @@
++/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and
++ gcc-2.7.2.3/longlong.h which is: */
++/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
++
++This file is part of GNU CC.
++
++GNU CC is free software; you can redistribute it and/or modify
++it under the terms of the GNU General Public License as published by
++the Free Software Foundation; either version 2, or (at your option)
++any later version.
++
++GNU CC is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++GNU General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with GNU CC; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++#define UWtype USItype
++#define UHWtype USItype
++#define W_TYPE_SIZE 32
++#define __BITS4 (W_TYPE_SIZE / 4)
++#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
++#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
++#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
++
++#define umul_ppmm(w1, w0, u, v) \
++ do { \
++ UWtype __x0, __x1, __x2, __x3; \
++ UHWtype __ul, __vl, __uh, __vh; \
++ \
++ __ul = __ll_lowpart (u); \
++ __uh = __ll_highpart (u); \
++ __vl = __ll_lowpart (v); \
++ __vh = __ll_highpart (v); \
++ \
++ __x0 = (UWtype) __ul * __vl; \
++ __x1 = (UWtype) __ul * __vh; \
++ __x2 = (UWtype) __uh * __vl; \
++ __x3 = (UWtype) __uh * __vh; \
++ \
++ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
++ __x1 += __x2; /* but this indeed can */ \
++ if (__x1 < __x2) /* did we get it? */ \
++ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
++ \
++ (w1) = __x3 + __ll_highpart (__x1); \
++ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
++ } while (0)
++
++
++#define __umulsidi3(u, v) \
++ ({DIunion __w; \
++ umul_ppmm (__w.s.high, __w.s.low, u, v); \
++ __w.ll; })
++
++typedef int SItype __attribute__ ((mode (SI)));
++typedef unsigned int USItype __attribute__ ((mode (SI)));
++typedef int DItype __attribute__ ((mode (DI)));
++typedef int word_type __attribute__ ((mode (__word__)));
++
++struct DIstruct {SItype high, low;};
++
++typedef union
++{
++ struct DIstruct s;
++ DItype ll;
++} DIunion;
++
++DItype
++__muldi3 (DItype u, DItype v)
++{
++ DIunion w;
++ DIunion uu, vv;
++
++ uu.ll = u,
++ vv.ll = v;
++
++ w.ll = __umulsidi3 (uu.s.low, vv.s.low);
++ w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
++ + (USItype) uu.s.high * (USItype) vv.s.low);
++
++ return w.ll;
++}
+--- a/arch/ubicom32/kernel/ubicom32_ksyms.c
++++ b/arch/ubicom32/kernel/ubicom32_ksyms.c
+@@ -72,7 +72,6 @@ EXPORT_SYMBOL(memmove);
+ extern void __ashldi3(void);
+ extern void __ashrdi3(void);
+ extern void __divsi3(void);
+-extern void __divdi3(void);
+ extern void __lshrdi3(void);
+ extern void __modsi3(void);
+ extern void __muldi3(void);
+@@ -83,7 +82,6 @@ extern void __umodsi3(void);
+ EXPORT_SYMBOL(__ashldi3);
+ EXPORT_SYMBOL(__ashrdi3);
+ EXPORT_SYMBOL(__divsi3);
+-EXPORT_SYMBOL(__divdi3);
+ EXPORT_SYMBOL(__lshrdi3);
+ EXPORT_SYMBOL(__modsi3);
+ EXPORT_SYMBOL(__muldi3);
diff --git a/target/linux/ubicom32/patches-2.6.32/130-flash_driver_fix.patch b/target/linux/ubicom32/patches-2.6.32/130-flash_driver_fix.patch
new file mode 100644
index 0000000000..95fa50807b
--- /dev/null
+++ b/target/linux/ubicom32/patches-2.6.32/130-flash_driver_fix.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/ubi32-m25p80.c
++++ b/drivers/mtd/devices/ubi32-m25p80.c
+@@ -630,8 +630,8 @@ static int ubicom32_flash_driver_erase(s
+ /* sanity checks */
+ if (instr->addr + instr->len > flash->mtd.size)
+ return -EINVAL;
+- if ((instr->addr % mtd->erasesize) != 0
+- || (instr->len % mtd->erasesize) != 0) {
++ if (((u32) instr->addr % mtd->erasesize) != 0
++ || ((u32) instr->len % mtd->erasesize) != 0) {
+ return -EINVAL;
+ }
+
diff --git a/target/linux/ubicom32/patches-2.6.32/140-arch_cflags.patch b/target/linux/ubicom32/patches-2.6.32/140-arch_cflags.patch
new file mode 100644
index 0000000000..aa1396e419
--- /dev/null
+++ b/target/linux/ubicom32/patches-2.6.32/140-arch_cflags.patch
@@ -0,0 +1,13 @@
+--- a/arch/ubicom32/Makefile
++++ b/arch/ubicom32/Makefile
+@@ -54,8 +54,8 @@ CFLAGS_MODULE += -mno-fastcall
+ #
+ # Some CFLAG additions based on specific CPU type.
+ #
+-cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000
+-cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000
++cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -mno-fdpic -DIP5000
++cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -mno-fdpic -DIP7000
+
+ ldflags-$(CONFIG_LINKER_RELAXATION) := --relax
+ LDFLAGS_vmlinux := $(ldflags-y)