diff options
Diffstat (limited to 'target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c')
| -rw-r--r-- | target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c | 1066 |
1 files changed, 1066 insertions, 0 deletions
diff --git a/target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c b/target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c new file mode 100644 index 0000000000..405491cc40 --- /dev/null +++ b/target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c @@ -0,0 +1,1066 @@ +/* + * drivers/mtd/devices/ubi32-m25p80.c + * NOR flash driver, Ubicom processor internal SPI flash interface. + * + * This code instantiates the serial flash that contains the + * original bootcode. The serial flash start at address 0x60000000 + * in both Ubicom32V3 and Ubicom32V4 ISAs. + * + * This piece of flash is made to appear as a Memory Technology + * Device (MTD) with this driver to allow Read/Write/Erase operations. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/types.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> + +#include <asm/ip5000.h> +#include <asm/devtree.h> + +#define UBICOM32_FLASH_BASE 0x60000000 +#define UBICOM32_FLASH_MAX_SIZE 0x01000000 +#define UBICOM32_FLASH_START 0x00000000 +#define UBICOM32_KERNEL_OFFSET 0x00010000 /* The kernel starts after Ubicom + * .protect section. */ + +static struct mtd_partition ubicom32_flash_partitions[] = { + { + .name = "Bootloader", /* Protected Section + * Partition */ + .size = 0x10000, + .offset = UBICOM32_FLASH_START, +// .mask_flags = MTD_WRITEABLE /* Mark Read-only */ + }, + { + .name = "Kernel", /* Kernel Partition. */ + .size = 0, /* this will be set up during + * probe stage. At that time we + * will know end of linux image + * in flash. */ + .offset = MTDPART_OFS_APPEND, /* Starts right after Protected + * section. */ +// .mask_flags = MTD_WRITEABLE /* Mark Read-only */ + }, + { + .name = "Rest", /* Rest of the flash. */ + .size = 0x200000, /* Use up what remains in the + * flash. */ + .offset = MTDPART_OFS_NXTBLK, /* Starts right after Protected + * section. */ + } +}; + +static struct flash_platform_data ubicom32_flash_data = { + .name = "ubicom32_boot_flash", + .parts = ubicom32_flash_partitions, + .nr_parts = ARRAY_SIZE(ubicom32_flash_partitions), +}; + +static struct resource ubicom32_flash_resource[] = { + { + .start = UBICOM32_FLASH_BASE, + .end = UBICOM32_FLASH_BASE + + UBICOM32_FLASH_MAX_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ubicom32_flash_device = { + .name = "ubicom32flashdriver", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(ubicom32_flash_resource), + .resource = ubicom32_flash_resource, + .dev = { + .platform_data = &ubicom32_flash_data, + }, +}; + +static struct platform_device *ubicom32_flash_devices[] = { + &ubicom32_flash_device, +}; + +static int __init ubicom32_flash_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", + __FUNCTION__); + platform_add_devices(ubicom32_flash_devices, + ARRAY_SIZE(ubicom32_flash_devices)); + return 0; +} + +arch_initcall(ubicom32_flash_init); + +/* + * MTD SPI driver for ST M25Pxx (and similar) serial flash chips through + * Ubicom32 SPI controller. + * + * Author: Mike Lavender, mike@steroidmicros.com + * + * Copyright (c) 2005, Intec Automation Inc. + * + * Some parts are based on lart.c by Abraham Van Der Merwe + * + * Cleaned up and generalized based on mtd_dataflash.c + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define FLASH_PAGESIZE 256 + +/* Flash opcodes. */ +#define OPCODE_WREN 0x06 /* Write enable */ +#define OPCODE_RDSR 0x05 /* Read status register */ +#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */ +#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ +#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ +#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ +#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ +#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ + +/* Status Register bits. */ +#define SR_WIP 1 /* Write in progress */ +#define SR_WEL 2 /* Write enable latch */ +/* meaning of other SR_* bits may differ between vendors */ +#define SR_BP0 4 /* Block protect 0 */ +#define SR_BP1 8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ + +/* Define max times to check status register before we give up. */ +#define MAX_READY_WAIT_COUNT 100000 + + +#ifdef CONFIG_MTD_PARTITIONS +#define mtd_has_partitions() (1) +#else +#define mtd_has_partitions() (0) +#endif + +/* + * Ubicom32 FLASH Command Set + */ +#define FLASH_FC_INST_CMD 0x00 /* for SPI command only transaction */ +#define FLASH_FC_INST_WR 0x01 /* for SPI write transaction */ +#define FLASH_FC_INST_RD 0x02 /* for SPI read transaction */ + +#define ALIGN_DOWN(v, a) ((v) & ~((a) - 1)) +#define ALIGN_UP(v, a) (((v) + ((a) - 1)) & ~((a) - 1)) + +#define FLASH_COMMAND_KICK_OFF(io) \ + asm volatile( \ + " bset "D(IO_INT_CLR)"(%0), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t" \ + " jmpt.t .+4 \n\t" \ + " bset "D(IO_INT_SET)"(%0), #0, #%%bit("D(IO_XFL_INT_START)") \n\t" \ + : \ + : "a" (io) \ + : "memory", "cc" \ + ); + +#define FLASH_COMMAND_WAIT_FOR_COMPLETION(io) \ + asm volatile( \ + " btst "D(IO_INT_STATUS)"(%0), #%%bit("D(IO_XFL_INT_DONE)") \n\t" \ + " jmpeq.f .-4 \n\t" \ + : \ + : "a" (io) \ + : "memory", "cc" \ + ); + +#define FLASH_COMMAND_EXEC(io) \ + FLASH_COMMAND_KICK_OFF(io) \ + FLASH_COMMAND_WAIT_FOR_COMPLETION(io) + + +#define OSC1_FREQ 12000000 +#define TEN_MICRO_SECONDS (OSC1_FREQ * 10 / 1000000) + +/* + * We will have to eventually replace this null definition with the real thing. + */ +#define WATCHDOG_RESET() + +#define EXTFLASH_WRITE_FIFO_SIZE 32 +#define EXTFLASH_WRITE_BLOCK_SIZE EXTFLASH_WRITE_FIFO_SIZE /* limit the size to + * FIFO capacity, so + * the thread can be + * suspended. */ + +#define JFFS2_FILESYSTEM_SIZE 0x100000 + +/****************************************************************************/ + +struct m25p { + struct platform_device *plt_dev; + struct mutex lock; + struct mtd_info mtd; + unsigned partitioned:1; + u8 erase_opcode; + u8 command[4]; +}; + +static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) +{ + return container_of(mtd, struct m25p, mtd); +} + +/****************************************************************************/ + +/* + * Internal helper functions + */ + +/* + * Read the status register, returning its value in the location + * Return the status register value. + * Returns negative if error occurred. + */ +static int read_sr(struct m25p *flash) +{ + struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; + + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | + IO_XFL_CTL1_FC_DATA(1); + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR); + FLASH_COMMAND_EXEC(io); + + return io->status1 & 0xff; +} + +/* + * mem_flash_io_read_u32() + */ +static u32 mem_flash_io_read_u32(u32 addr) +{ + struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | + IO_XFL_CTL1_FC_DATA(4) | IO_XFL_CTL1_FC_DUMMY(1) | + IO_XFL_CTL1_FC_ADDR; + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_FAST_READ) | + IO_XFL_CTL2_FC_ADDR(addr); + FLASH_COMMAND_EXEC(io); + return io->status1; +} + +/* + * mem_flash_read_u8() + */ +static u8 mem_flash_read_u8(u32 addr) +{ + u32 tmp_addr = ALIGN_DOWN(addr, 4); + u32 tmp_data = mem_flash_io_read_u32(tmp_addr); + u8 *ptr = (u8 *)&tmp_data; + return ptr[addr & 0x3]; +} + +/* + * mem_flash_read() + * No need to lock as read is implemented with ireads (same as normal flash + * execution). + */ +static void mem_flash_read(u32 addr, void *dst, size_t length) +{ + /* + * Range check + */ + /* + * Fix source alignment. + */ + while (addr & 0x03) { + if (length == 0) { + return; + } + *((u8 *)dst) = mem_flash_read_u8(addr++); + dst++; + length--; + } + + while (length >= 4) { + u32 tmp_data = mem_flash_io_read_u32(addr); + addr += 4; + length -= 4; + + /* + * Send the data to the destination. + */ + memcpy((void *)dst, (void *)&tmp_data, 4); + dst += 4; + } + + while (length--) { + *((u8 *)dst) = mem_flash_read_u8(addr++); + dst++; + } +} + +/* + * mem_flash_wait_until_complete() + */ +static void mem_flash_wait_until_complete(void) +{ + struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; + + do { + /* + * Put a delay here to deal with flash programming problem. + */ + u32 mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS; + while (UBICOM32_IO_TIMER->mptval < mptval) + ; + + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | + IO_XFL_CTL1_FC_DATA(1); + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR); + FLASH_COMMAND_EXEC(io); + } while (io->status1 & SR_WIP); +} + +/* + * mem_flash_write_next() + */ +static size_t mem_flash_write_next(u32 addr, u8 *buf, size_t length) +{ + struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; + u32 data_start = addr; + u32 data_end = addr + length; + size_t count; + u32 i, j; + + /* + * Top limit address. + */ + u32 block_start = ALIGN_DOWN(data_start, 4); + u32 block_end = block_start + EXTFLASH_WRITE_BLOCK_SIZE; + + union { + u8 byte[EXTFLASH_WRITE_BLOCK_SIZE]; + u32 word[EXTFLASH_WRITE_BLOCK_SIZE / 4]; + } write_buf; + + u32 *flash_addr = (u32 *)block_start; + + /* + * The write block must be limited by FLASH internal buffer. + */ + u32 block_end_align = ALIGN_DOWN(block_end, 256); + bool write_needed; + + block_end = (block_end_align > block_start) + ? block_end_align : block_end; + data_end = (data_end <= block_end) ? data_end : block_end; + block_end = ALIGN_UP(data_end, 4); + count = data_end - data_start; + + /* + * Transfer data to a buffer. + */ + for (i = 0; i < (block_end - block_start) / 4; i++) { + /* + * The FLASH read can hold D-cache for a long time. + * Use I/O operation to read FLASH to avoid starving other + * threads, especially HRT. (Do this for application only) + */ + write_buf.word[i] = mem_flash_io_read_u32( + (u32)(&flash_addr[i])); + } + + write_needed = false; + for (i = 0, j = (data_start - block_start); + i < (data_end - data_start); i++, j++) { + write_needed = write_needed || (write_buf.byte[j] != buf[i]); + write_buf.byte[j] &= buf[i]; + } + + + /* + * If the data in FLASH is identical to what to be written. Then skip + * it. + */ + if (write_needed) { + /* + * Write to flash. + */ + void *tmp __attribute__((unused)); + s32 extra_words; + + asm volatile( + " move.4 %0, %2 \n\t" + " bset "D(IO_INT_SET)"(%1), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t" + " pipe_flush 0 \n\t" + " .rept "D(EXTFLASH_WRITE_FIFO_SIZE / 4)" \n\t" + " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t" + " .endr \n\t" + : "=&a" (tmp) + : "a" (io), "r" (&write_buf.word[0]) + : "memory", "cc" + ); + + /* Lock FLASH for write access. */ + io->ctl0 |= IO_XFL_CTL0_MCB_LOCK; + + /* Command: WREN */ + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD); + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN); + FLASH_COMMAND_EXEC(io); + + /* Command: BYTE PROGRAM */ + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | + IO_XFL_CTL1_FC_DATA(block_end - block_start) | + IO_XFL_CTL1_FC_ADDR; + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_PP) | + IO_XFL_CTL2_FC_ADDR(block_start); + FLASH_COMMAND_KICK_OFF(io); + + extra_words = (s32)(block_end - block_start - + EXTFLASH_WRITE_FIFO_SIZE) / 4; + if (extra_words > 0) { + asm volatile( + " move.4 %0, %3 \n\t" + "1: cmpi "D(IO_FIFO_LEVEL)"(%1), #4 \n\t" + " jmpgt.s.t 1b \n\t" + " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t" + " add.4 %2, #-1, %2 \n\t" + " jmpgt.t 1b \n\t" + : "=&a" (tmp) + : "a" (io), "d" (extra_words), + "r" (&write_buf.word[EXTFLASH_WRITE_FIFO_SIZE / 4]) + : "memory", "cc" + ); + } + FLASH_COMMAND_WAIT_FOR_COMPLETION(io); + + mem_flash_wait_until_complete(); + + + /* Unlock FLASH for cache access. */ + io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK; + } + + /* + * Complete. + */ + return count; +} + +/* + * mem_flash_write() + */ +static void mem_flash_write(u32 addr, const void *src, size_t length) +{ + /* + * Write data + */ + u8_t *ptr = (u8_t *)src; + while (length) { + size_t count = mem_flash_write_next(addr, ptr, length); + addr += count; + ptr += count; + length -= count; + } +} + +/* + * Service routine to read status register until ready, or timeout occurs. + * Returns non-zero if error. + */ +static int wait_till_ready(struct m25p *flash) +{ + int count; + int sr; + + /* one chip guarantees max 5 msec wait here after page writes, + * but potentially three seconds (!) after page erase. + */ + for (count = 0; count < MAX_READY_WAIT_COUNT; count++) { + u32 mptval; + sr = read_sr(flash); + if (sr < 0) + break; + else if (!(sr & SR_WIP)) + return 0; + + /* + * Put a 10us delay here to deal with flash programming problem. + */ + mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS; + while ((s32)(mptval - UBICOM32_IO_TIMER->mptval) > 0) { + WATCHDOG_RESET(); + } + /* REVISIT sometimes sleeping would be best */ + } + + return 1; +} + +/* + * mem_flash_erase_page() + */ +static void mem_flash_erase_page(u32 addr) +{ + struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; + + /* Lock FLASH for write access. */ + io->ctl0 |= IO_XFL_CTL0_MCB_LOCK; + + /* Command: WREN */ + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD); + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN); + FLASH_COMMAND_EXEC(io); + + /* Command: ERASE */ + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD) | + IO_XFL_CTL1_FC_ADDR; + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_SE) | + IO_XFL_CTL2_FC_ADDR(addr); + FLASH_COMMAND_EXEC(io); + + mem_flash_wait_until_complete(); + + /* Unlock FLASH for cache access. */ + io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK; +} + +/* + * mem_flash_erase() + */ +static u32 mem_flash_erase(u32 addr, u32 length) +{ + /* + * Calculate the endaddress to be the first address of the page + * just beyond this erase section of pages. + */ + u32 endaddr = addr + length; + + /* + * Erase. + */ + while (addr < endaddr) { + u32 test_addr = addr; + mem_flash_erase_page(addr); + + /* + * Test how much was erased as actual flash page at this address + * may be smaller than the expected page size. + */ + while (test_addr < endaddr) { + /* + * The FLASH read can hold D-cache for a long time. Use + * I/O operation to read FLASH to avoid starving other + * threads, especially HRT. (Do this for application + * only) + */ + if (mem_flash_io_read_u32(test_addr) != 0xFFFFFFFF) { + break; + } + test_addr += 4; + } + if (test_addr == addr) { + printk("erase failed at address 0x%x, skipping", + test_addr); + test_addr += 4; + return 1; + } + addr = test_addr; + } + return 0; +} + + +/****************************************************************************/ + +/* + * MTD implementation + */ + +/* + * Erase an address range on the flash chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int ubicom32_flash_driver_erase(struct mtd_info *mtd, + struct erase_info *instr) +{ + struct m25p *flash = mtd_to_m25p(mtd); + u32 addr, len; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %lld\n", + dev_name(&flash->plt_dev->dev), __FUNCTION__, "at", + (u32)instr->addr, instr->len); + + /* sanity checks */ + if (instr->addr + instr->len > flash->mtd.size) + return -EINVAL; + if ((instr->addr % mtd->erasesize) != 0 + || (instr->len % mtd->erasesize) != 0) { + return -EINVAL; + } + + addr = instr->addr + UBICOM32_FLASH_BASE; + len = instr->len; + + mutex_lock(&flash->lock); + + /* REVISIT in some cases we could speed up erasing large regions + * by using OPCODE_SE instead of OPCODE_BE_4K + */ + + /* now erase those sectors */ + if (mem_flash_erase(addr, len)) { + instr->state = MTD_ERASE_FAILED; + mutex_unlock(&flash->lock); + return -EIO; + } + + mutex_unlock(&flash->lock); + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + return 0; +} + +/* + * Read an address range from the flash chip. The address range + * may be any size provided it is within the physical boundaries. + */ +static int ubicom32_flash_driver_read(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + struct m25p *flash = mtd_to_m25p(mtd); + u32 base_addr = UBICOM32_FLASH_BASE + from; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n", + dev_name(&flash->plt_dev->dev), __FUNCTION__, "from", + (u32)from, len); + + /* sanity checks */ + if (!len) + return 0; + + if (from + len > flash->mtd.size) + return -EINVAL; + + /* Byte count starts at zero. */ + if (retlen) + *retlen = 0; + + mutex_lock(&flash->lock); + + /* Wait till previous write/erase is done. */ + if (wait_till_ready(flash)) { + /* REVISIT status return?? */ + mutex_unlock(&flash->lock); + return 1; + } + + mem_flash_read(base_addr, (void *)buf, len); + + if (retlen) + *retlen = len; + + mutex_unlock(&flash->lock); + + return 0; +} + +/* + * Write an address range to the flash chip. Data must be written in + * FLASH_PAGESIZE chunks. The address range may be any size provided + * it is within the physical boundaries. + */ +static int ubicom32_flash_driver_write(struct mtd_info *mtd, loff_t to, + size_t len, size_t *retlen, + const u_char *buf) +{ + struct m25p *flash = mtd_to_m25p(mtd); + u32 base_addr = UBICOM32_FLASH_BASE + to; + DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n", + dev_name(&flash->plt_dev->dev), __FUNCTION__, "to", + (u32)to, len); + + if (retlen) + *retlen = 0; + + /* sanity checks */ + if (!len) + return 0; + + if (to + len > flash->mtd.size) + return -EINVAL; + + mutex_lock(&flash->lock); + + mem_flash_write(base_addr, (void *) buf, len); + + /* Wait until finished previous write command. */ + if (wait_till_ready(flash)) { + mutex_unlock(&flash->lock); + return 1; + } + + if (retlen) + *retlen = len; + + mutex_unlock(&flash->lock); + return 0; +} + + +/****************************************************************************/ + +/* + * SPI device driver setup and teardown + */ + +struct flash_info { + char *name; + + /* JEDEC id zero means "no ID" (most older chips); otherwise it has + * a high byte of zero plus three data bytes: the manufacturer id, + * then a two byte device id. + */ + u32 jedec_id; + + /* The size listed here is what works with OPCODE_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned sector_size; + u16 n_sectors; + + u16 flags; +#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ +}; + + +/* NOTE: double check command sets and memory organization when you add + * more flash chips. This current list focusses on newer chips, which + * have been converging on command sets which including JEDEC ID. + */ +static struct flash_info __devinitdata m25p_data[] = { + + /* Atmel -- some are (confusingly) marketed as "DataFlash" */ + { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, }, + { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, }, + + { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, }, + + { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, }, + { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, }, + { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, + { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, }, + + /* Spansion -- single (large) sector size only, at least + * for the chips listed here (without boot sectors). + */ + { "s25sl004a", 0x010212, 64 * 1024, 8, }, + { "s25sl008a", 0x010213, 64 * 1024, 16, }, + { "s25sl016a", 0x010214, 64 * 1024, 32, }, + { "s25sl032a", 0x010215, 64 * 1024, 64, }, + { "s25sl064a", 0x010216, 64 * 1024, 128, }, + + /* SST -- large erase sizes are "overlays", "sectors" are 4K */ + { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, }, + { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, }, + { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, }, + { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, }, + + /* ST Microelectronics -- newer production may have feature updates */ + { "m25p05", 0x202010, 32 * 1024, 2, }, + { "m25p10", 0x202011, 32 * 1024, 4, }, + { "m25p20", 0x202012, 64 * 1024, 4, }, + { "m25p40", 0x202013, 64 * 1024, 8, }, + { "m25p80", 0, 64 * 1024, 16, }, + { "m25p16", 0x202015, 64 * 1024, 32, }, + { "m25p32", 0x202016, 64 * 1024, 64, }, + { "m25p64", 0x202017, 64 * 1024, 128, }, + { "m25p128", 0x202018, 256 * 1024, 64, }, + + { "m45pe80", 0x204014, 64 * 1024, 16, }, + { "m45pe16", 0x204015, 64 * 1024, 32, }, + + { "m25pe80", 0x208014, 64 * 1024, 16, }, + { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, }, + + /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ + { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, }, + { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, }, + { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, }, + { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, }, + { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, }, + { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, }, + { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, }, + + /* Macronix -- mx25lxxx */ + { "mx25l32", 0xc22016, 64 * 1024, 64, }, + { "mx25l64", 0xc22017, 64 * 1024, 128, }, + { "mx25l128", 0xc22018, 64 * 1024, 256, }, + +}; + +struct flash_info *__devinit jedec_probe(struct platform_device *spi) +{ + int tmp; + u32 jedec; + struct flash_info *info; + struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; + + /* + * Setup and run RDID command on the flash. + */ + io->ctl1 &= ~IO_XFL_CTL1_MASK; + io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | + IO_XFL_CTL1_FC_DATA(3); + io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDID); + FLASH_COMMAND_EXEC(io); + + jedec = io->status1 & 0x00ffffff; + + for (tmp = 0, info = m25p_data; + tmp < ARRAY_SIZE(m25p_data); + tmp++, info++) { + if (info->jedec_id == jedec) + return info; + } + dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); + return NULL; +} + + +/* + * board specific setup should have ensured the SPI clock used here + * matches what the READ command supports, at least until this driver + * understands FAST_READ (for clocks over 25 MHz). + */ +static int __devinit ubicom32_flash_probe(struct platform_device *spi) +{ + struct flash_platform_data *data; + struct m25p *flash; + struct flash_info *info; + unsigned i; + + /* Platform data helps sort out which chip type we have, as + * well as how this board partitions it. If we don't have + * a chip ID, try the JEDEC id commands; they'll work for most + * newer chips, even if we don't recognize the particular chip. + */ + data = spi->dev.platform_data; + if (data && data->type) { + for (i = 0, info = m25p_data; + i < ARRAY_SIZE(m25p_data); + i++, info++) { + if (strcmp(data->type, info->name) == 0) + break; + } + + /* unrecognized chip? */ + if (i == ARRAY_SIZE(m25p_data)) { + DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n", + dev_name(&spi->dev), data->type); + info = NULL; + + /* recognized; is that chip really what's there? */ + } else if (info->jedec_id) { + struct flash_info *chip = jedec_probe(spi); + + if (!chip || chip != info) { + dev_warn(&spi->dev, "found %s, expected %s\n", + chip ? chip->name : "UNKNOWN", + info->name); + info = NULL; + } + } + } else + info = jedec_probe(spi); + + if (!info) + return -ENODEV; + + flash = kzalloc(sizeof *flash, GFP_KERNEL); + if (!flash) + return -ENOMEM; + + flash->plt_dev = spi; + mutex_init(&flash->lock); + dev_set_drvdata(&spi->dev, flash); + + if (data && data->name) + flash->mtd.name = data->name; + else + flash->mtd.name = dev_name(&spi->dev); + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.writesize = 1; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = info->sector_size * info->n_sectors; + flash->mtd.erase = ubicom32_flash_driver_erase; + flash->mtd.read = ubicom32_flash_driver_read; + flash->mtd.write = ubicom32_flash_driver_write; + + /* prefer "small sector" erase if possible */ + /* + * The Ubicom erase code does not use the opcode for smaller sectors, + * so disable that functionality and keep erasesize == sector_size + * so that the test in ubicom32_flash_driver_erase works properly. + * + * This was: `if (info->flags & SECT_4K) {' instead of `if (0) {' + */ + if (0) { + flash->erase_opcode = OPCODE_BE_4K; + flash->mtd.erasesize = 4096; + } else { + flash->erase_opcode = OPCODE_SE; + flash->mtd.erasesize = info->sector_size; + } + + dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name, + flash->mtd.size / 1024); + + DEBUG(MTD_DEBUG_LEVEL2, + "mtd .name = %s, .size = 0x%.8llx (%lluMiB) " + ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + flash->mtd.name, + flash->mtd.size, flash->mtd.size / (1024*1024), + flash->mtd.erasesize, flash->mtd.erasesize / 1024, + flash->mtd.numeraseregions); + + if (flash->mtd.numeraseregions) + for (i = 0; i < flash->mtd.numeraseregions; i++) + DEBUG(MTD_DEBUG_LEVEL2, + "mtd.eraseregions[%d] = { .offset = 0x%.8llx, " + ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, flash->mtd.eraseregions[i].offset, + flash->mtd.eraseregions[i].erasesize, + flash->mtd.eraseregions[i].erasesize / 1024, + flash->mtd.eraseregions[i].numblocks); + + + /* partitions should match sector boundaries; and it may be good to + * use readonly partitions for writeprotected sectors (BP2..BP0). + */ + if (mtd_has_partitions()) { + struct mtd_partition *parts = NULL; + int nr_parts = 0; + +#ifdef CONFIG_MTD_CMDLINE_PARTS + static const char *part_probes[] = { "cmdlinepart", NULL, }; + + nr_parts = parse_mtd_partitions(&flash->mtd, + part_probes, &parts, 0); +#endif + + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; + if (nr_parts >= 2) { + /* + * Set last partition size to be 1M. + */ + parts[1].size = flash->mtd.size - + parts[0].size - JFFS2_FILESYSTEM_SIZE; + parts[2].size = JFFS2_FILESYSTEM_SIZE; + } + } + + if (nr_parts > 0) { + for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%.8llx, " + ".size = 0x%.8llx (%lluKiB) }\n", + i, parts[i].name, + parts[i].offset, + parts[i].size, + parts[i].size / 1024); + } + flash->partitioned = 1; + return add_mtd_partitions(&flash->mtd, parts, nr_parts); + } + } else if (data->nr_parts) + dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", + data->nr_parts, data->name); + + return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0; +} + + +static int __devexit ubicom32_flash_remove(struct spi_device *spi) +{ + struct m25p *flash = dev_get_drvdata(&spi->dev); + int status; + + /* Clean up MTD stuff. */ + if (mtd_has_partitions() && flash->partitioned) + status = del_mtd_partitions(&flash->mtd); + else + status = del_mtd_device(&flash->mtd); + if (status == 0) + kfree(flash); + return 0; +} + +static struct platform_driver ubicom32_flash_driver = { + .driver = { + .name = "ubicom32flashdriver", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + }, + .probe = ubicom32_flash_probe, + .remove = NULL, +}; + +static int ubicom32_flash_driver_init(void) +{ + return platform_driver_register(&ubicom32_flash_driver); +} + + +static void ubicom32_flash_driver_exit(void) +{ + platform_driver_unregister(&ubicom32_flash_driver); +} + + +module_init(ubicom32_flash_driver_init); +module_exit(ubicom32_flash_driver_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mike Lavender"); +MODULE_DESCRIPTION("Ubicom32 MTD SPI driver for ST M25Pxx flash chips"); |