summaryrefslogtreecommitdiff
path: root/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch')
-rw-r--r--target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch551
1 files changed, 0 insertions, 551 deletions
diff --git a/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch b/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch
deleted file mode 100644
index 5f27aa7999..0000000000
--- a/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch
+++ /dev/null
@@ -1,551 +0,0 @@
-This patch adds support for the D-Link DSM-G600 Rev A.
-This is an ARM XScale IXP4xx system relatively similar to
-the NSLU2 and NAS-100D already supported by mainline. An
-important difference is Gigabit Ethernet support using
-the Via Velocity chipset.
-
-This patch is the combined work of Michael Westerhof and
-Alessandro Zummo, with contributions from Michael-Luke
-Jones. This version addresses review comments from rmk
-and Deepak Saxena.
-
-Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
-Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
-Signed-off-by: Michael Westerhof <mwester@dls.net>
-
----
- arch/arm/mach-ixp4xx/Kconfig | 9 +
- arch/arm/mach-ixp4xx/Makefile | 2
- arch/arm/mach-ixp4xx/dsmg600-pci.c | 74 +++++++++++++
- arch/arm/mach-ixp4xx/dsmg600-power.c | 130 ++++++++++++++++++++++++
- arch/arm/mach-ixp4xx/dsmg600-setup.c | 175 +++++++++++++++++++++++++++++++++
- include/asm-arm/arch-ixp4xx/dsmg600.h | 57 ++++++++++
- include/asm-arm/arch-ixp4xx/hardware.h | 1
- include/asm-arm/arch-ixp4xx/irqs.h | 10 +
- 8 files changed, 458 insertions(+)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,15 @@ config MACH_NAS100D
- NAS 100d device. For more information on this platform,
- see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
-
-+config MACH_DSMG600
-+ bool
-+ prompt "D-Link DSM-G600 RevA"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support D-Link's
-+ DSM-G600 RevA device. For more information on this platform,
-+ see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
-+
- #
- # Avila and IXDP share the same source for now. Will change in future
- #
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -12,6 +12,7 @@ obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coy
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
- obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
-+obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
-
- obj-y += common.o
-
-@@ -22,5 +23,6 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
-+obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * DSM-G600 board-level PCI initialization
-+ *
-+ * Copyright (C) 2006 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init dsmg600_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
-+ {
-+ { IRQ_DSMG600_PCI_INTE, -1, -1 },
-+ { IRQ_DSMG600_PCI_INTA, -1, -1 },
-+ { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
-+ { IRQ_DSMG600_PCI_INTF, -1, -1 },
-+ };
-+
-+ int irq = -1;
-+
-+ if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
-+ irq = pci_irq_table[slot-1][pin-1];
-+
-+ return irq;
-+}
-+
-+struct hw_pci __initdata dsmg600_pci = {
-+ .nr_controllers = 1,
-+ .preinit = dsmg600_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = dsmg600_map_irq,
-+};
-+
-+int __init dsmg600_pci_init(void)
-+{
-+ if (machine_is_dsmg600())
-+ pci_common_init(&dsmg600_pci);
-+
-+ return 0;
-+}
-+
-+subsys_initcall(dsmg600_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-power.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-power.c
-@@ -0,0 +1,130 @@
-+/*
-+ * arch/arm/mach-ixp4xx/dsmg600-power.c
-+ *
-+ * DSM-G600 Power/Reset driver
-+ * Author: Michael Westerhof <mwester@dls.net>
-+ *
-+ * Based on nslu2-power.c
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * which was based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
-+
-+#include <asm/mach-types.h>
-+
-+extern void ctrl_alt_del(void);
-+
-+/* This is used to make sure the power-button pusher is serious. The button
-+ * must be held until the value of this counter reaches zero.
-+ */
-+static volatile int power_button_countdown;
-+
-+/* Must hold the button down for at least this many counts to be processed */
-+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-+
-+static void dsmg600_power_handler(unsigned long data);
-+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-+
-+static void dsmg600_power_handler(unsigned long data)
-+{
-+ /* This routine is called twice per second to check the
-+ * state of the power button.
-+ */
-+
-+ if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
-+
-+ /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0) {
-+ power_button_countdown--;
-+ }
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
-+ if (power_button_countdown == 0) {
-+ /* Signal init to do the ctrlaltdel action, this will bypass
-+ * init if it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ /* Change the state of the power LED to "blink" */
-+ gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+ }
-+ }
-+
-+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-+}
-+
-+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly. */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init dsmg600_power_init(void)
-+{
-+ if (!(machine_is_dsmg600()))
-+ return 0;
-+
-+ if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
-+ IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
-+ NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ DSMG600_RB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ /* The power button on the D-Link DSM-G600 is on GPIO 15, but
-+ * it cannot handle interrupts on that GPIO line. So we'll
-+ * have to poll it with a kernel timer.
-+ */
-+
-+ /* Make sure that the power button GPIO is set up as an input */
-+ gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Set the initial value for the power button IRQ handler */
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+
-+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-+
-+ return 0;
-+}
-+
-+static void __exit dsmg600_power_exit(void)
-+{
-+ if (!(machine_is_dsmg600()))
-+ return;
-+
-+ del_timer_sync(&dsmg600_power_timer);
-+
-+ free_irq(DSMG600_RB_IRQ, NULL);
-+}
-+
-+module_init(dsmg600_power_init);
-+module_exit(dsmg600_power_exit);
-+
-+MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
-+MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -0,0 +1,175 @@
-+/*
-+ * DSM-G600 board-setup
-+ *
-+ * Copyright (C) 2006 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data dsmg600_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource dsmg600_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device dsmg600_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &dsmg600_flash_data,
-+ .num_resources = 1,
-+ .resource = &dsmg600_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
-+ .sda_pin = DSMG600_SDA_PIN,
-+ .scl_pin = DSMG600_SCL_PIN,
-+};
-+
-+static struct platform_device dsmg600_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &dsmg600_i2c_gpio_pins,
-+};
-+
-+#ifdef CONFIG_LEDS_CLASS
-+static struct resource dsmg600_led_resources[] = {
-+ {
-+ .name = "power",
-+ .start = DSMG600_LED_PWR_GPIO,
-+ .end = DSMG600_LED_PWR_GPIO,
-+ .flags = IXP4XX_GPIO_HIGH,
-+ },
-+ {
-+ .name = "wlan",
-+ .start = DSMG600_LED_WLAN_GPIO,
-+ .end = DSMG600_LED_WLAN_GPIO,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+};
-+
-+static struct platform_device dsmg600_leds = {
-+ .name = "IXP4XX-GPIO-LED",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(dsmg600_led_resources),
-+ .resource = dsmg600_led_resources,
-+};
-+#endif
-+
-+static struct resource dsmg600_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port dsmg600_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device dsmg600_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = dsmg600_uart_data,
-+ .num_resources = ARRAY_SIZE(dsmg600_uart_resources),
-+ .resource = dsmg600_uart_resources,
-+};
-+
-+static struct platform_device *dsmg600_devices[] __initdata = {
-+ &dsmg600_i2c_controller,
-+ &dsmg600_flash,
-+};
-+
-+static void dsmg600_power_off(void)
-+{
-+ /* enable the pwr cntl gpio */
-+ gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+ /* poweroff */
-+ gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init dsmg600_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ /* Make sure that GPIO14 and GPIO15 are not used as clocks */
-+ *IXP4XX_GPIO_GPCLKR = 0;
-+
-+ dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ dsmg600_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ pm_power_off = dsmg600_power_off;
-+
-+ /* The UART is required on the DSM-G600 (Redboot cannot use the
-+ * NIC) -- do it here so that it does *not* get removed if
-+ * platform_add_devices fails!
-+ */
-+ (void)platform_device_register(&dsmg600_uart);
-+
-+ platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
-+
-+#ifdef CONFIG_LEDS_CLASS
-+ /* We don't care whether or not this works. */
-+ (void)platform_device_register(&dsmg600_leds);
-+#endif
-+}
-+
-+static void __init dsmg600_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ /* The xtal on this machine is non-standard. */
-+ ixp4xx_timer_freq = DSMG600_FREQ;
-+}
-+
-+MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+ .boot_params = 0x00000100,
-+ .fixup = dsmg600_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .init_machine = dsmg600_init,
-+MACHINE_END
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/dsmg600.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/dsmg600.h
-@@ -0,0 +1,57 @@
-+/*
-+ * DSM-G600 platform specific definitions
-+ *
-+ * Copyright (C) 2006 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on ixdp425.h:
-+ * Copyright 2004 (C) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define DSMG600_SDA_PIN 5
-+#define DSMG600_SCL_PIN 4
-+
-+/*
-+ * DSMG600 PCI IRQs
-+ */
-+#define DSMG600_PCI_MAX_DEV 4
-+#define DSMG600_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define DSMG600_PCI_INTA_PIN 11
-+#define DSMG600_PCI_INTB_PIN 10
-+#define DSMG600_PCI_INTC_PIN 9
-+#define DSMG600_PCI_INTD_PIN 8
-+#define DSMG600_PCI_INTE_PIN 7
-+#define DSMG600_PCI_INTF_PIN 6
-+
-+/* DSM-G600 Timer Setting */
-+#define DSMG600_FREQ 66000000
-+
-+/* Buttons */
-+
-+#define DSMG600_PB_GPIO 15 /* power button */
-+#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO)
-+
-+#define DSMG600_RB_GPIO 3 /* reset button */
-+
-+#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3
-+
-+#define DSMG600_PO_GPIO 2 /* power off */
-+
-+/* LEDs */
-+
-+#define DSMG600_LED_PWR_GPIO 0
-+#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO)
-+
-+#define DSMG600_LED_WLAN_GPIO 14
-+#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO)
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -47,5 +47,6 @@ extern unsigned int processor_id;
- #include "prpmc1100.h"
- #include "nslu2.h"
- #include "nas100d.h"
-+#include "dsmg600.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/irqs.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/irqs.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/irqs.h
-@@ -118,4 +118,14 @@
- #define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8
- #define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7
-
-+/*
-+ * D-Link DSM-G600 RevA board IRQs
-+ */
-+#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11
-+#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10
-+#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9
-+#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8
-+#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
-+#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
-+
- #endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 01:16:23 +0000