summaryrefslogtreecommitdiff
path: root/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch')
-rw-r--r--target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch304
1 files changed, 0 insertions, 304 deletions
diff --git a/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch
deleted file mode 100644
index e75371bf99..0000000000
--- a/target/linux/ar7/patches-2.6.32/160-vlynq_try_remote_first.patch
+++ /dev/null
@@ -1,304 +0,0 @@
---- a/drivers/vlynq/vlynq.c
-+++ b/drivers/vlynq/vlynq.c
-@@ -103,6 +103,12 @@ static void vlynq_dump_mem(u32 *base, in
- }
- #endif
-
-+u32 __vlynq_rev_reg(struct vlynq_regs *regs)
-+{
-+ return readl(&regs->revision);
-+}
-+EXPORT_SYMBOL(__vlynq_rev_reg);
-+
- /* Check the VLYNQ link status with a given device */
- static int vlynq_linked(struct vlynq_device *dev)
- {
-@@ -117,20 +123,40 @@ static int vlynq_linked(struct vlynq_dev
- return 0;
- }
-
-+static volatile int vlynq_delay_value_new = 0;
-+
-+static void vlynq_delay_wait(u32 count)
-+{
-+ /* Code adopted from original vlynq driver */
-+ int i = 0;
-+ volatile int *ptr = &vlynq_delay_value_new;
-+ *ptr = 0;
-+
-+ /* We are assuming that the each cycle takes about
-+ * 23 assembly instructions. */
-+ for(i = 0; i < (count + 23)/23; i++)
-+ *ptr = *ptr + 1;
-+}
-+
- static void vlynq_reset(struct vlynq_device *dev)
- {
-+ u32 rtm = readl(&dev->local->revision);
-+
-+ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
-+ 0 : 0x600000;
-+
- writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
- &dev->local->control);
-
- /* Wait for the devices to finish resetting */
-- msleep(5);
-+ vlynq_delay_wait(0xffffff);
-
- /* Remove reset bit */
-- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
-+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
- &dev->local->control);
-
- /* Give some time for the devices to settle */
-- msleep(5);
-+ vlynq_delay_wait(0xffffff);
- }
-
- static void vlynq_irq_unmask(unsigned int irq)
-@@ -379,6 +405,61 @@ void vlynq_unregister_driver(struct vlyn
- }
- EXPORT_SYMBOL(vlynq_unregister_driver);
-
-+enum vlynq_clk_src {
-+ vlynq_clk_external,
-+ vlynq_clk_local,
-+ vlynq_clk_remote,
-+ vlynq_clk_invalid,
-+};
-+
-+static int __vlynq_set_clocks(struct vlynq_device *dev,
-+ enum vlynq_clk_src clk_dir,
-+ int lclk_div, int rclk_div)
-+{
-+ u32 reg;
-+
-+ if (clk_dir == vlynq_clk_invalid) {
-+ printk(KERN_ERR "%s: attempt to set invalid clocking\n",
-+ dev_name(&dev->dev));
-+ return -EINVAL;
-+ }
-+
-+ reg = readl(&dev->local->control);
-+ if (readl(&dev->local->revision) < 0x00010205) {
-+ if (clk_dir & vlynq_clk_local)
-+ reg |= VLYNQ_CTRL_CLOCK_INT;
-+ else
-+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+ }
-+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
-+ writel(reg, &dev->local->control);
-+
-+ if (!vlynq_linked(dev))
-+ return -ENODEV;
-+
-+ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
-+ dev_name(&dev->dev), readl(&dev->local->revision));
-+ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
-+ dev_name(&dev->dev), readl(&dev->remote->revision));
-+
-+ reg = readl(&dev->remote->control);
-+ if (readl(&dev->remote->revision) < 0x00010205) {
-+ if (clk_dir & vlynq_clk_remote)
-+ reg |= VLYNQ_CTRL_CLOCK_INT;
-+ else
-+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+ }
-+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
-+ writel(reg, &dev->remote->control);
-+
-+ if (!vlynq_linked(dev))
-+ return -ENODEV;
-+
-+ return 0;
-+}
-+
- /*
- * A VLYNQ remote device can clock the VLYNQ bus master
- * using a dedicated clock line. In that case, both the
-@@ -392,29 +473,17 @@ static int __vlynq_try_remote(struct vly
- int i;
-
- vlynq_reset(dev);
-- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
-- i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
-- dev->dev_id ? i++ : i--) {
-+ for (i = dev->dev_id ? 0 : 7; dev->dev_id ? i <= 7 : i >= 0;
-+ dev->dev_id ? i++ : i--) {
-
- if (!vlynq_linked(dev))
- break;
-
-- writel((readl(&dev->remote->control) &
-- ~VLYNQ_CTRL_CLOCK_MASK) |
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-- &dev->remote->control);
-- writel((readl(&dev->local->control)
-- & ~(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_MASK)) |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using remote clock divisor %d\n",
-- dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
-- dev->divisor = i;
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
-+ printk(KERN_INFO
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev), i + 1);
-+ dev->divisor = i + vlynq_rdiv1;
- return 0;
- } else {
- vlynq_reset(dev);
-@@ -437,21 +506,14 @@ static int __vlynq_try_local(struct vlyn
-
- vlynq_reset(dev);
-
-- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
-- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
-- dev->dev_id ? i++ : i--) {
--
-- writel((readl(&dev->local->control) &
-- ~VLYNQ_CTRL_CLOCK_MASK) |
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using local clock divisor %d\n",
-- dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
-- dev->divisor = i;
-+ for (i = dev->dev_id ? 0 : 7; dev->dev_id ? i <= 7 : i >= 0;
-+ dev->dev_id ? i++ : i--) {
-+
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
-+ printk(KERN_INFO
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev), i + 1);
-+ dev->divisor = i + vlynq_ldiv1;
- return 0;
- } else {
- vlynq_reset(dev);
-@@ -473,18 +535,10 @@ static int __vlynq_try_external(struct v
- if (!vlynq_linked(dev))
- return -ENODEV;
-
-- writel((readl(&dev->remote->control) &
-- ~VLYNQ_CTRL_CLOCK_INT),
-- &dev->remote->control);
--
-- writel((readl(&dev->local->control) &
-- ~VLYNQ_CTRL_CLOCK_INT),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG "%s: using external clock\n",
-- dev_name(&dev->dev));
-- dev->divisor = vlynq_div_external;
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
-+ printk(KERN_INFO "%s: using external clock\n",
-+ dev_name(&dev->dev));
-+ dev->divisor = vlynq_div_external;
- return 0;
- }
-
-@@ -507,18 +561,9 @@ static int __vlynq_enable_device(struct
- * generation negotiated by hardware.
- * Check which device is generating clocks and perform setup
- * accordingly */
-- if (vlynq_linked(dev) && readl(&dev->remote->control) &
-- VLYNQ_CTRL_CLOCK_INT) {
-- if (!__vlynq_try_remote(dev) ||
-- !__vlynq_try_local(dev) ||
-- !__vlynq_try_external(dev))
-- return 0;
-- } else {
-- if (!__vlynq_try_external(dev) ||
-- !__vlynq_try_local(dev) ||
-- !__vlynq_try_remote(dev))
-- return 0;
-- }
-+ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev) ||
-+ !__vlynq_try_external(dev))
-+ return 0;
- break;
- case vlynq_ldiv1:
- case vlynq_ldiv2:
-@@ -528,15 +573,12 @@ static int __vlynq_enable_device(struct
- case vlynq_ldiv6:
- case vlynq_ldiv7:
- case vlynq_ldiv8:
-- writel(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_ldiv1), &dev->local->control);
-- writel(0, &dev->remote->control);
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using local clock divisor %d\n",
-- dev_name(&dev->dev),
-- dev->divisor - vlynq_ldiv1 + 1);
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
-+ vlynq_ldiv1, 0)) {
-+ printk(KERN_INFO
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_ldiv1 + 1);
- return 0;
- }
- break;
-@@ -548,15 +590,12 @@ static int __vlynq_enable_device(struct
- case vlynq_rdiv6:
- case vlynq_rdiv7:
- case vlynq_rdiv8:
-- writel(0, &dev->local->control);
-- writel(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_rdiv1), &dev->remote->control);
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using remote clock divisor %d\n",
-- dev_name(&dev->dev),
-- dev->divisor - vlynq_rdiv1 + 1);
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
-+ dev->divisor - vlynq_rdiv1)) {
-+ printk(KERN_INFO
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_rdiv1 + 1);
- return 0;
- }
- break;
-@@ -732,13 +771,12 @@ static int vlynq_probe(struct platform_d
- platform_set_drvdata(pdev, dev);
-
- printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
-- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
-- (void *)dev->mem_start);
-+ dev_name(&dev->dev), (void *)dev->regs_start,
-+ dev->irq, (void *)dev->mem_start);
-
- dev->dev_id = 0;
- dev->divisor = vlynq_div_auto;
-- result = __vlynq_enable_device(dev);
-- if (result == 0) {
-+ if (!__vlynq_enable_device(dev)) {
- dev->dev_id = readl(&dev->remote->chip);
- ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
- }
---- a/include/linux/vlynq.h
-+++ b/include/linux/vlynq.h
-@@ -98,6 +98,7 @@ static inline struct vlynq_device *to_vl
-
- extern struct bus_type vlynq_bus_type;
-
-+extern u32 __vlynq_rev_reg(struct vlynq_regs *regs);
- extern int __vlynq_register_driver(struct vlynq_driver *driver,
- struct module *owner);
-
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 04:24:39 +0000