diff options
Diffstat (limited to 'target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h')
| -rw-r--r-- | target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h | 757 |
1 files changed, 0 insertions, 757 deletions
diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h deleted file mode 100644 index 02a150eac4..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h +++ /dev/null @@ -1,757 +0,0 @@ -//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl -#ifndef _AMAZON_MEI_IOCTL_H -#define _AMAZON_MEI_IOCTL_H - -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define PCM_BUFF_SIZE 1024 //bytes -// interrupt numbers - -#ifndef _AMAZON_ADSL_APP - -typedef struct pcm_data_struct{ - u16 S; - u16 temp; - u16 LSW; - u16 MSW; - u16 len; - u16 rdindex; - u16 wrindex; - u16 flow; - - int finish; - u8 buff[PCM_BUFF_SIZE]; - int point; -}pcm_data_struct; - -typedef struct amazon_clreoc_pkt{ - struct list_head list; - u8 * command; //point to clreoc command data - int len; //command length -}amazon_clreoc_pkt; - -// Number of intervals -#define INTERVAL_NUM 192 //two days -typedef struct amazon_mei_mib{ - struct list_head list; - struct timeval start_time; //start of current interval - - int AtucPerfLof; - int AtucPerfLos; - int AtucPerfEs; - int AtucPerfInit; - - int AturPerfLof; - int AturPerfLos; - int AturPerfLpr; - int AturPerfEs; - - int AturChanPerfRxBlk; - int AturChanPerfTxBlk; - int AturChanPerfCorrBlk; - int AturChanPerfUncorrBlk; - - //RFC-3440 - int AtucPerfStatFastR; - int AtucPerfStatFailedFastR; - int AtucPerfStatSesL; - int AtucPerfStatUasL; - int AturPerfStatSesL; - int AturPerfStatUasL; -}amazon_mei_mib; - -typedef struct adslChanPrevTxRate{ - u32 adslAtucChanPrevTxRate; - u32 adslAturChanPrevTxRate; -}adslChanPrevTxRate; - -typedef struct adslPhysCurrStatus{ - u32 adslAtucCurrStatus; - u32 adslAturCurrStatus; -}adslPhysCurrStatus; - -typedef struct ChanType{ - int interleave; - int fast; -// 603221:tc.chen start - int bearchannel0; - int bearchannel1; -// 603221:tc.chen end -}ChanType; - -typedef struct mib_previous_read{ - u16 ATUC_PERF_ESS; - u16 ATUR_PERF_ESS; - u32 ATUR_CHAN_RECV_BLK; - u16 ATUR_CHAN_CORR_BLK_INTL; - u16 ATUR_CHAN_CORR_BLK_FAST; - u16 ATUR_CHAN_UNCORR_BLK_INTL; - u16 ATUR_CHAN_UNCORR_BLK_FAST; - u16 ATUC_PERF_STAT_FASTR; - u16 ATUC_PERF_STAT_FAILED_FASTR; - u16 ATUC_PERF_STAT_SESL; - u16 ATUC_PERF_STAT_UASL; - u16 ATUR_PERF_STAT_SESL; -}mib_previous_read; - -typedef struct mib_flags_pretime{ - struct timeval ATUC_PERF_LOSS_PTIME; - struct timeval ATUC_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LOSS_PTIME; - struct timeval ATUR_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LPR_PTIME; -}mib_flags_pretime; - - // cmv message structures -#define MP_PAYLOAD_SIZE 12 -typedef struct mpmessage{ - u16 iFunction; - u16 iGroup; - u16 iAddress; - u16 iIndex; - u16 iPayload[MP_PAYLOAD_SIZE]; -}MPMessage; -#endif - - -typedef struct meireg{ - u32 iAddress; - u32 iData; -}meireg; - -#define MEIDEBUG_BUFFER_SIZES 50 -typedef struct meidebug{ - u32 iAddress; - u32 iCount; - u32 buffer[MEIDEBUG_BUFFER_SIZES]; -}meidebug; - -//============================================================================== -// Group definitions -//============================================================================== -#define OPTN 5 -#define CNFG 8 -#define CNTL 1 -#define STAT 2 -#define RATE 6 -#define PLAM 7 -#define INFO 3 -#define TEST 4 -//============================================================================== -// Opcode definitions -//============================================================================== -#define H2D_CMV_READ 0x00 -#define H2D_CMV_WRITE 0x04 -#define H2D_CMV_INDICATE_REPLY 0x10 -#define H2D_ERROR_OPCODE_UNKNOWN 0x20 -#define H2D_ERROR_CMV_UNKNOWN 0x30 - -#define D2H_CMV_READ_REPLY 0x01 -#define D2H_CMV_WRITE_REPLY 0x05 -#define D2H_CMV_INDICATE 0x11 -#define D2H_ERROR_OPCODE_UNKNOWN 0x21 -#define D2H_ERROR_CMV_UNKNOWN 0x31 -#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41 -#define D2H_ERROR_CMV_WRITE_ONLY 0x51 -#define D2H_ERROR_CMV_READ_ONLY 0x61 - -#define H2D_DEBUG_READ_DM 0x02 -#define H2D_DEBUG_READ_PM 0x06 -#define H2D_DEBUG_WRITE_DM 0x0a -#define H2D_DEBUG_WRITE_PM 0x0e - -#define D2H_DEBUG_READ_DM_REPLY 0x03 -#define D2H_DEBUG_READ_FM_REPLY 0x07 -#define D2H_DEBUG_WRITE_DM_REPLY 0x0b -#define D2H_DEBUG_WRITE_FM_REPLY 0x0f -#define D2H_ERROR_ADDR_UNKNOWN 0x33 - -#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1 -//============================================================================== -// INFO register address field definitions -//============================================================================== - -#define INFO_TxState 0 -#define INFO_RxState 1 -#define INFO_TxNextState 2 -#define INFO_RxNextState 3 -#define INFO_TxStateJumpFrom 4 -#define INFO_RxStateJumpFrom 5 - -#define INFO_ReverbSnrBuf 8 -#define INFO_ReverbEchoSnrBuf 9 -#define INFO_MedleySnrBuf 10 -#define INFO_RxShowtimeSnrBuf 11 -#define INFO_DECdelay 12 -#define INFO_DECExponent 13 -#define INFO_DECTaps 14 -#define INFO_AECdelay 15 -#define INFO_AECExponent 16 -#define INFO_AECTaps 17 -#define INFO_TDQExponent 18 -#define INFO_TDQTaps 19 -#define INFO_FDQExponent 20 -#define INFO_FDQTaps 21 -#define INFO_USBat 22 -#define INFO_DSBat 23 -#define INFO_USFineGains 24 -#define INFO_DSFineGains 25 -#define INFO_BitloadFirstChannel 26 -#define INFO_BitloadLastChannel 27 -#define INFO_PollEOCData 28 // CO specific -#define INFO_CSNRMargin 29 // CO specific -#define INFO_RCMsgs1 30 -#define INFO_RMsgs1 31 -#define INFO_RMsgRA 32 -#define INFO_RCMsgRA 33 -#define INFO_RMsg2 34 -#define INFO_RCMsg2 35 -#define INFO_BitLoadOK 36 -#define INFO_RCRates1 37 -#define INFO_RRates1Tab 38 -#define INFO_RMsgs1Tab 39 -#define INFO_RMsgRATab 40 -#define INFO_RRatesRA 41 -#define INFO_RCRatesRA 42 -#define INFO_RRates2 43 -#define INFO_RCRates2 44 -#define INFO_PackedRMsg2 45 -#define INFO_RxBitSwapFlag 46 -#define INFO_TxBitSwapFlag 47 -#define INFO_ShowtimeSNRUpdateCount 48 -#define INFO_ShowtimeFDQUpdateCount 49 -#define INFO_ShowtimeDECUpdateCount 50 -#define INFO_CopyRxBuffer 51 -#define INFO_RxToneBuf 52 -#define INFO_TxToneBuf 53 -#define INFO_Version 54 -#define INFO_TimeStamp 55 -#define INFO_feVendorID 56 -#define INFO_feSerialNum 57 -#define INFO_feVersionNum 58 -#define INFO_BulkMemory 59 //Points to start of bulk memory -#define INFO_neVendorID 60 -#define INFO_neVersionNum 61 -#define INFO_neSerialNum 62 - -//============================================================================== -// RATE register address field definitions -//============================================================================== - - -#define RATE_UsRate 0 -#define RATE_DsRate 1 - - -//============================================================================== -// PLAM (Physical Layer Management) register address field definitions -// (See G997.1 for reference) -//============================================================================== - - - // /// - // Failure Flags /// - // /// - -#define PLAM_NearEndFailureFlags 0 -#define PLAM_FarEndFailureFlags 1 - - // /// - // Near End Failure Flags Bit Definitions /// - // /// - -// ADSL Failures /// -#define PLAM_LOS_FailureBit 0x0001 -#define PLAM_LOF_FailureBit 0x0002 -#define PLAM_LPR_FailureBit 0x0004 -#define PLAM_RFI_FailureBit 0x0008 - -// ATM Failures /// -#define PLAM_NCD_LP0_FailureBit 0x0010 -#define PLAM_NCD_LP1_FailureBit 0x0020 -#define PLAM_LCD_LP0_FailureBit 0x0040 -#define PLAM_LCD_LP1_FailureBit 0x0080 - -#define PLAM_NCD_BC0_FailureBit 0x0100 -#define PLAM_NCD_BC1_FailureBit 0x0200 -#define PLAM_LCD_BC0_FailureBit 0x0400 -#define PLAM_LCD_BC1_FailureBit 0x0800 - // /// - // Performance Counts /// - // /// - -#define PLAM_NearEndCrcCnt 2 -#define PLAM_CorrectedRSErrors 3 - -#define PLAM_NearEndECSCnt 6 -#define PLAM_NearEndESCnt 7 -#define PLAM_NearEndSESCnt 8 -#define PLAM_NearEndLOSSCnt 9 -#define PLAM_NearEndUASLCnt 10 - -#define PLAM_NearEndHECErrCnt 11 - -#define PLAM_NearEndHECTotCnt 16 -#define PLAM_NearEndCellTotCnt 18 -#define PLAM_NearEndSfCntLSW 20 -#define PLAM_NearEndSfCntMSW 21 - -#define PLAM_FarEndFebeCnt 24 - -#define PLAM_FarEndFecCnt 28 - -#define PLAM_FarEndFECSCnt 32 -#define PLAM_FarEndESCnt 33 -#define PLAM_FarEndSESCnt 34 -#define PLAM_FarEndLOSSCnt 35 -#define PLAM_FarEndUASLCnt 36 - -#define PLAM_FarEndHECErrCnt 37 - -#define PLAM_FarEndHECTotCnt 41 - -#define PLAM_FarEndCellTotCnt 43 - -#define PLAM_LineAttn 45 -#define PLAM_SNRMargin 46 - - -//============================================================================== -// CNTL register address and bit field definitions -//============================================================================== - - -#define CNTL_ModemControl 0 - -#define CNTL_ModemReset 0x0 -#define CNTL_ModemStart 0x2 - - -//============================================================================== -// STAT register address and bit field definitions -//============================================================================== - -#define STAT_MacroState 0 -#define STAT_Mode 1 -#define STAT_DMTFramingMode 2 -#define STAT_SleepState 3 -#define STAT_Misc 4 -#define STAT_FailureState 5 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - //16-bit STAT_OLRStatus_DS - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits). - // [11]: 1=Receive Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRStatus_DS 6 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - // 16-bit STAT_OLRStatus_US CMV - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [8]: 1=Request Received. 0=not. - // [10:9]: Reserved - // [11]: 1=Response Sent, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -/// -#define STAT_OLRStatus_US 7 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_PMStatus provides status of PM - // 16-bit STAT_PMStatus CMV - // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted - // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM - // [3]: Reserved - // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits). - // [11]: 1=Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_PMStatus 8 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError - // [3:0]: OLR/PM response reason code - // [7:4]: OLR/PM Internal error code - // [15:8]: OLR/PM Reserved for future - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRError_DS 9 -#define STAT_OLRError_US 10 -#define STAT_PMError 11 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_MacroState -// MacroState reflects the high level state of the modem - -#define STAT_InitState 0x0000 -#define STAT_ReadyState 0x0001 -#define STAT_FailState 0x0002 -#define STAT_IdleState 0x0003 -#define STAT_QuietState 0x0004 -#define STAT_GhsState 0x0005 -#define STAT_FullInitState 0x0006 -#define STAT_ShowTimeState 0x0007 -#define STAT_FastRetrainState 0x0008 -#define STAT_LoopDiagMode 0x0009 -#define STAT_ShortInit 0x000A // Bis short initialization /// - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Mode -// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use -// G.Hs or some other mechanism to negotiate the specific mode of operation. -// The OPTN_modeControl CMV is used to select a set of desired modes. -// The STAT_Mode CMV indicates which mode was actually selected. - -#define STAT_ConfigMode_T1413 0x0001 -#define STAT_ConfigMode_G992_2_AB 0x0002 -#define STAT_ConfigMode_G992_1_A 0x0004 -#define STAT_ConfigMode_G992_1_B 0x0008 -#define STAT_ConfigMode_G992_1_C 0x0010 -#define STAT_ConfigMode_G992_2_C 0x0020 - -#define STAT_ConfigMode_G992_3_A 0x0100 -#define STAT_ConfigMode_G992_3_B 0x0200 -#define STAT_ConfigMode_G992_3_I 0x0400 -#define STAT_ConfigMode_G992_3_J 0x0800 -#define STAT_ConfigMode_G992_3_L 0x1000 - -#define STAT_ConfigMode_G992_4_A 0x2000 -#define STAT_ConfigMode_G992_4_I 0x4000 - -#define STAT_ConfigMode_G992_5 0x8000 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_DMTFramingMode -// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode -// status is not applicable in BIS mode and its value is undefined -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_FramingModeMask 0x0003 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Misc -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OverlappedSpectrum 0x0008 -#define STAT_TCM 0x0010 -#define STAT_TDQ_at_1104 0x0020 -#define STAT_T1413_Signal_Detected 0x0040 -#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1 -#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_FailureState -// when the MacroSTate indicates the fail state, FailureState provides a failure code -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - - -#define E_CODE_NO_ERROR 0 -#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */ -#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */ -#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */ -#define E_CODE_TX_AOC_FIFO_OVERFLOW 4 -#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/ -#define E_CODE_BITLOAD 6 // bit loading fails */ -#define E_CODE_ST_ERROR 7 // showtime CRC error */ -#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */ -#define E_CODE_C_TONES 9 // detected C_TONES */ -#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */ -#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */ -#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */ -#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */ -#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */ -#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */ -#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */ -#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */ -#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */ -#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */ -#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */ -#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */ -#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */ -#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */ -#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */ -#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */ -#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */ -#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */ -#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */ -#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */ -#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */ -#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */ -#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */ -#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */ -#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */ -#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */ -#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */ -#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */ -#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */ -#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */ -#define E_CODE_BAD_MEM_ACCESS 46 -#define E_CODE_BAD_INSTRUCTION_ACCESS 47 -#define E_CODE_TX_EOC_FIFO_OVERFLOW 48 -#define E_CODE_RX_EOC_FIFO_OVERFLOW 49 -#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */ - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//STAT_OLRStatus: -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OLRPM_IDLE 0x0000 -#define STAT_OLRPM_IN_PROGRESS 0x0001 -#define STAT_OLRPM_COMPLETE 0x0002 -#define STAT_OLRPM_ABORTED 0x0003 -#define STAT_OLRPM_RESPONSE 0x0800 - -#define STAT_OLR_BITSWAP 0x0010 -#define STAT_OLR_DRR 0x0020 -#define STAT_OLR_SRA 0x0030 - -//STAT_PMStatus_US: -#define STAT_PM_CO_REQ 0x0004 -#define STAT_PM_SIMPLE_REQ 0x0010 -#define STAT_PM_L2_REQ 0x0020 -#define STAT_PM_L2_TRIM_REQ 0x0030 - -// STAT_OLRError_DS, STAT_OLRError_US -//4 bit response reason code: -#define RESP_BUSY 0x01 -#define RESP_INVALID_PARAMETERS 0x02 -#define RESP_NOT_ENABLED 0x03 -#define RESP_NOT_SUPPORTED 0x04 - -//4 bit internal error code (common for OLR and PM) -#define REQ_INVALID_BiGi 0x10 -#define REQ_INVALID_Lp 0x20 -#define REQ_INVALID_Bpn 0x30 -#define REQ_INVALID_FRAMING_CONSTRAINT 0x40 -#define REQ_NOT_IN_L0_STATE 0x50 -#define REQ_NOT_IN_L2_STATE 0x60 -#define REQ_INVALID_PCB 0x70 -#define REQ_VIOLATES_MARGIN 0x80 - -//STAT_PMError -//4 bit response reason code: -#define RESP_STATE_NOT_DESIRED 0x03 -#define RESP_INFEASIBLE_PARAMETERS 0x04 - - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN register address and bit field definitions -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_ModeControl 0 -#define OPTN_DMTLnkCtl 1 -// Reserved 2 -#define OPTN_GhsControl 3 -// Reserved 4 -#define OPTN_PwrManControl 5 -#define OPTN_AnnexControl 6 -#define OPTN_ModeControl1 7 -// Reserved 8 -#define OPTN_StateMachineCtrl 9 -// Reserved 10 -// Reserved 11 -#define OPTN_BisLinkControl 12 -#define OPTN_ATMAddrConfig 13 -#define OPTN_ATMNumCellConfig 14 - -// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may /// -// use G.Hs or some other mechanism to negotiate the specific mode of operation. /// -// The OPTN_ModeControl CMV is used to select a set of desired modes /// -// The STAT_ModeControl CMV indicates which mode was actually selected /// - -// OPTN_ModeControl -#define OPTN_ConfigMode_T1413 0x0001 -#define OPTN_ConfigMode_G992_2_AB 0x0002 -#define OPTN_ConfigMode_G992_1_A 0x0004 -#define OPTN_ConfigMode_G992_1_B 0x0008 -#define OPTN_ConfigMode_G992_1_C 0x0010 -#define OPTN_ConfigMode_G992_2_C 0x0020 - -#define OPTN_ConfigMode_G992_3_A 0x0100 -#define OPTN_ConfigMode_G992_3_B 0x0200 -#define OPTN_ConfigMode_G992_3_I 0x0400 -#define OPTN_ConfigMode_G992_3_J 0x0800 -#define OPTN_ConfigMode_G992_3_L 0x1000 - -#define OPTN_ConfigMode_G992_4_A 0x2000 -#define OPTN_ConfigMode_G992_4_I 0x4000 - -#define OPTN_ConfigMode_G992_5 0x8000 - -// OPTN_PwrManControl -#define OPTN_PwrManWakeUpGhs 0x1 -#define OPTN_PwrManWakeUpFR 0x2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_DMT Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_DMT_DualLatency_Dis 0x200 -#define OPTN_DMT_S_Dis 0x100 -#define OPTN_DMT_FRAMINGMODE 0x1 -#define OPTN_DMT_FRAMINGMODE_MASK 0x7 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_BIS Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_BisLinkContrl_LineProbeDis 0x1 -#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2 -#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_GhsControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// -// for OPTN_GhsControl, we will assign 16bit word as follows -// bit 0~3: set the control over which start(initial) message CPE will send: -// -// BIT: 2 1 0 -// 0 0 1 CLR -// 0 1 0 MR -// 0 1 1 MS -// 1 0 0 MP -// -// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange -// BIT: 5 4 -// 0 1 MS -// 1 0 MR -// 1 1 MP -// -// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default. -// BIT: 15 -// 1 means session one -// -/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_GHS_ST_GHS 0x8000 -#define OPTN_GHS_INIT_MASK 0x000F -#define OPTN_GHS_RESP_MASK 0x00F0 - -#define OPTN_RTInitTxMsg_CLR 0x0001 -#define OPTN_RTInitTxMsg_MR 0x0002 -#define OPTN_RTInitTxMsg_MS 0x0003 -#define OPTN_RTInitTxMsg_MP 0x0004 - -#define OPTN_RTRespTxMsg_MS 0x0010 -#define OPTN_RTRespTxMsg_MR 0x0020 -#define OPTN_RTRespTxMsg_MP 0x0030 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_AnnexControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - - -// G.992.3 Annex A/L1/L2 US PSD Mask preferred - -#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000 -#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask /// - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMAddrConfig -// Bits 4:0 are Utopia address for BC1 -// Bits 9:5 are Utopia address for BC0 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_UTPADDR_BC1 0x001F -#define OPTN_UTPADDR_BC0 0x03E0 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMNumCellConfig -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 /// -#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 /// - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// CNFG register address field /// -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -/////////////////////////////////////////// -// these cmvs are used by bis handshake /// -/////////////////////////////////////////// - -// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t) -#define CNFG_TPS_TC_DS0 0 -#define CNFG_TPS_TC_DS1 1 -#define CNFG_TPS_TC_US0 2 -#define CNFG_TPS_TC_US1 3 - -#define CNFG_HDLC_Overhead_Requirements 4 - -// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t) -#define CNFG_PMS_TC_DS0 5 -#define CNFG_PMS_TC_DS1 6 -#define CNFG_PMS_TC_US0 7 -#define CNFG_PMS_TC_US1 8 - -// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t) -#define CNFG_PMD_PARAMETERS 9 - -//////////////////////////////////////////////////////////// -// these cmvs are used by bis training and showtime code /// -//////////////////////////////////////////////////////////// - -//////////////// -// Tx Config /// -//////////////// -#define CNFG_tx_Cnfg_Nbc 10 -#define CNFG_tx_Cnfg_Nlp 11 -#define CNFG_tx_Cnfg_Rp 12 -#define CNFG_tx_Cnfg_Mp 13 -#define CNFG_tx_Cnfg_Lp 14 -#define CNFG_tx_Cnfg_Tp 15 -#define CNFG_tx_Cnfg_Dp 16 -#define CNFG_tx_Cnfg_Bpn 17 -#define CNFG_tx_Cnfg_FramingMode 18 -#define CNFG_tx_Cnfg_MSGLp 19 -#define CNFG_tx_Cnfg_MSGc 20 - - -//////////////// -// Rx Config /// -//////////////// -#define CNFG_rx_Cnfg_Nbc 21 -#define CNFG_rx_Cnfg_Nlp 22 -#define CNFG_rx_Cnfg_Rp 23 -#define CNFG_rx_Cnfg_Mp 24 -#define CNFG_rx_Cnfg_Lp 25 -#define CNFG_rx_Cnfg_Tp 26 -#define CNFG_rx_Cnfg_Dp 27 -#define CNFG_rx_Cnfg_Bpn 28 -#define CNFG_rx_Cnfg_FramingMode 29 -#define CNFG_rx_Cnfg_MSGLp 30 -#define CNFG_rx_Cnfg_MSGc 31 - -#define CNFG_tx_Cnfg_BCnToLPp 32 -#define CNFG_rx_Cnfg_BCnToLPp 33 - - - -#endif - |