diff options
Diffstat (limited to 'target/image')
51 files changed, 0 insertions, 5298 deletions
diff --git a/target/image/ar7/Makefile b/target/image/ar7/Makefile deleted file mode 100644 index bcdef970cf..0000000000 --- a/target/image/ar7/Makefile +++ /dev/null @@ -1,102 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -PKG_BUILD_DIR:=$(BUILD_DIR)/ar7loader - -LOADADDR := 0x94020000 -OUTPUT_FORMAT := elf32-tradlittlemips - -CFLAGS := -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -pipe -mlong-calls -fno-common \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap \ - -DLOADADDR=$(LOADADDR) - -$(PKG_BUILD_DIR)/cksum.o: $(PKG_BUILD_DIR)/cksum.c - $(HOSTCC) -o $@ $< - -$(PKG_BUILD_DIR)/ckmain.o: $(PKG_BUILD_DIR)/ckmain.c - $(HOSTCC) -o $@ $< - -$(PKG_BUILD_DIR)/tichksum: $(PKG_BUILD_DIR)/ckmain.o $(PKG_BUILD_DIR)/cksum.o - $(HOSTCC) -o $@ $< - -$(PKG_BUILD_DIR)/LzmaDecode.o: src/LzmaDecode.c - $(TARGET_CC) $(CFLAGS) -c -o $@ $< - -$(PKG_BUILD_DIR)/loader.o: src/loader.c - $(TARGET_CC) $(CFLAGS) -c -o $@ $< - -$(STAGING_DIR)/bin/srec2bin: src/srec2bin.c - $(HOSTCC) -o $@ $< - - -define Build/Compile - mkdir -p $(PKG_BUILD_DIR) - sed -e 's/@@OUTPUT_FORMAT@@/$(OUTPUT_FORMAT)/' \ - -e 's/@@LOADADDR@@/$(LOADADDR)/' \ - < src/zimage.script.in \ - > $(PKG_BUILD_DIR)/zimage.script - sed -e 's/@@OUTPUT_FORMAT@@/$(OUTPUT_FORMAT)/' \ - -e 's/@@LOADADDR@@/$(LOADADDR)/' \ - < src/ld.script.in \ - > $(PKG_BUILD_DIR)/ld.script - $(MAKE) $(PKG_BUILD_DIR)/loader.o $(PKG_BUILD_DIR)/LzmaDecode.o $(STAGING_DIR)/bin/srec2bin -endef - -define Build/Clean - rm -rf $(PKG_BUILD_DIR) -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - $(TARGET_CROSS)ld -T $(PKG_BUILD_DIR)/zimage.script -r -b binary $(KDIR)/vmlinux.lzma -o $(KDIR)/zimage.o - $(TARGET_CROSS)ld -static -G 0 --defsym kernel_entry=0x$${shell $(TARGET_CROSS)nm $(KDIR)/linux-*/vmlinux | grep kernel_entry | cut -d' ' -f1} -T $(PKG_BUILD_DIR)/ld.script \ - $(PKG_BUILD_DIR)/loader.o \ - $(PKG_BUILD_DIR)/LzmaDecode.o \ - $(KDIR)/zimage.o \ - -o $(KDIR)/loader - $(TARGET_CROSS)objcopy -O srec $(KDIR)/loader $(KDIR)/ram_zimage.sre - $(STAGING_DIR)/bin/srec2bin $(KDIR)/ram_zimage.sre $(KDIR)/vmlinux.bin -endef - -define align/jffs2-64k -bs=65536 conv=sync -endef - -define align/jffs2-128k -bs=131072 conv=sync -endef - -define Image/Build/CyberTAN - (dd if=/dev/zero bs=16 count=1; cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin) | \ - $(STAGING_DIR)/bin/addpattern -p $(3) -o $(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(4).bin -endef - -define Image/Build/sErCoMm - cat sercomm/adam2.bin "$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin" > "$(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(3).img" - dd if=sercomm/$(2) of="$(KDIR)/dgfw.tmp" bs=$$$$((0x3e0000 - 80)) seek=1 conv=notrunc - $(STAGING_DIR)/bin/dgfirmware -f -w "$(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(3).img" "$(KDIR)/dgfw.tmp" - rm -f "$(KDIR)/dgfw.tmp" -endef - -define Image/Build - dd if=$(KDIR)/vmlinux.bin $(call align/$(1)) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin - cat $(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)/root.$(1) >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin - $(call Image/Build/CyberTAN,$(1),AG1B,AG1B,$(1)) - $(call Image/Build/CyberTAN,$(1),WA21,WA21,$(1)) - $(call Image/Build/CyberTAN,$(1),WA22,WA22,$(1)) - $(call Image/Build/CyberTAN,$(1),WAG2,WAG2,$(1)) - $(call Image/Build/CyberTAN,$(1),WA31,WA31 -b,$(1)) - $(call Image/Build/CyberTAN,$(1),WA32,WA32 -b,$(1)) - $(call Image/Build/sErCoMm,$(1),dg834,$(1)) - $(call Image/Build/sErCoMm,$(1),jdr454wb,$(1)) -endef - -$(eval $(call BuildImage)) diff --git a/target/image/ar7/sercomm/adam2.bin b/target/image/ar7/sercomm/adam2.bin Binary files differdeleted file mode 100644 index d4aa0cd2d3..0000000000 --- a/target/image/ar7/sercomm/adam2.bin +++ /dev/null diff --git a/target/image/ar7/sercomm/dg834 b/target/image/ar7/sercomm/dg834 Binary files differdeleted file mode 100644 index 61fe336e85..0000000000 --- a/target/image/ar7/sercomm/dg834 +++ /dev/null diff --git a/target/image/ar7/sercomm/jdr454wb b/target/image/ar7/sercomm/jdr454wb Binary files differdeleted file mode 100644 index 821ff1c1af..0000000000 --- a/target/image/ar7/sercomm/jdr454wb +++ /dev/null diff --git a/target/image/ar7/src/LzmaDecode.c b/target/image/ar7/src/LzmaDecode.c deleted file mode 100644 index 951700bddf..0000000000 --- a/target/image/ar7/src/LzmaDecode.c +++ /dev/null @@ -1,663 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -typedef struct _CRangeDecoder -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback; - int Result; - #endif - int ExtraBytes; -} CRangeDecoder; - -Byte RangeDecoderReadByte(CRangeDecoder *rd) -{ - if (rd->Buffer == rd->BufferLim) - { - #ifdef _LZMA_IN_CB - UInt32 size; - rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); - rd->BufferLim = rd->Buffer + size; - if (size == 0) - #endif - { - rd->ExtraBytes = 1; - return 0xFF; - } - } - return (*rd->Buffer++); -} - -/* #define ReadByte (*rd->Buffer++) */ -#define ReadByte (RangeDecoderReadByte(rd)) - -void RangeDecoderInit(CRangeDecoder *rd, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - Byte *stream, UInt32 bufferSize - #endif - ) -{ - int i; - #ifdef _LZMA_IN_CB - rd->InCallback = inCallback; - rd->Buffer = rd->BufferLim = 0; - #else - rd->Buffer = stream; - rd->BufferLim = stream + bufferSize; - #endif - rd->ExtraBytes = 0; - rd->Code = 0; - rd->Range = (0xFFFFFFFF); - for(i = 0; i < 5; i++) - rd->Code = (rd->Code << 8) | ReadByte; -} - -#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; -#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; -#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } - -UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) -{ - RC_INIT_VAR - UInt32 result = 0; - int i; - for (i = numTotalBits; i > 0; i--) - { - /* UInt32 t; */ - range >>= 1; - - result <<= 1; - if (code >= range) - { - code -= range; - result |= 1; - } - /* - t = (code - range) >> 31; - t &= 1; - code -= range & (t - 1); - result = (result + result) | (1 - t); - */ - RC_NORMALIZE - } - RC_FLUSH_VAR - return result; -} - -int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) -{ - UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; - if (rd->Code < bound) - { - rd->Range = bound; - *prob += (kBitModelTotal - *prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 0; - } - else - { - rd->Range -= bound; - rd->Code -= bound; - *prob -= (*prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 1; - } -} - -#define RC_GET_BIT2(prob, mi, A0, A1) \ - UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ - if (code < bound) \ - { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ - else \ - { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ - RC_NORMALIZE - -#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) - -int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = numLevels; i > 0; i--) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT(prob, mi) - #else - mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return mi - (1 << numLevels); -} - -int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - int symbol = 0; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = 0; i < numLevels; i++) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) - #else - int bit = RangeDecoderBitDecode(probs + mi, rd); - mi = mi + mi + bit; - symbol |= (bit << i); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - int bit; - int matchBit = (matchByte >> 7) & 1; - matchByte <<= 1; - #ifdef _LZMA_LOC_OPT - { - CProb *prob = probs + ((1 + matchBit) << 8) + symbol; - RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) - } - #else - bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); - symbol = (symbol << 1) | bit; - #endif - if (matchBit != bit) - { - while (symbol < 0x100) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - break; - } - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - -int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) -{ - if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) - return RangeDecoderBitTreeDecode(p + LenLow + - (posState << kLenNumLowBits), kLenNumLowBits, rd); - if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) - return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + - (posState << kLenNumMidBits), kLenNumMidBits, rd); - return kLenNumLowSymbols + kLenNumMidSymbols + - RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); -} - -#define kNumStates 12 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#ifdef _LZMA_OUT_READ - -typedef struct _LzmaVarState -{ - CRangeDecoder RangeDecoder; - Byte *Dictionary; - UInt32 DictionarySize; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 Reps[4]; - int lc; - int lp; - int pb; - int State; - int PreviousIsMatch; - int RemainLen; -} LzmaVarState; - -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif - ) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - UInt32 i; - if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - vs->Dictionary = dictionary; - vs->DictionarySize = dictionarySize; - vs->DictionaryPos = 0; - vs->GlobalPos = 0; - vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; - vs->lc = lc; - vs->lp = lp; - vs->pb = pb; - vs->State = 0; - vs->PreviousIsMatch = 0; - vs->RemainLen = 0; - dictionary[dictionarySize - 1] = 0; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&vs->RangeDecoder, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); - return LZMA_RESULT_OK; -} - -int LzmaDecode(unsigned char *buffer, - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - CRangeDecoder rd = vs->RangeDecoder; - int state = vs->State; - int previousIsMatch = vs->PreviousIsMatch; - Byte previousByte; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << (vs->pb)) - 1; - UInt32 literalPosMask = (1 << (vs->lp)) - 1; - int lc = vs->lc; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - if (len == -1) - { - *outSizeProcessed = 0; - return LZMA_RESULT_OK; - } - - while(len > 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; -#else - -int LzmaDecode( - Byte *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - CProb *p = (CProb *)buffer; - CRangeDecoder rd; - UInt32 i; - int state = 0; - int previousIsMatch = 0; - Byte previousByte = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << pb) - 1; - UInt32 literalPosMask = (1 << lp) - 1; - int len = 0; - if (bufferSize < numProbs * sizeof(CProb)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&rd, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); -#endif - - *outSizeProcessed = 0; - while(nowPos < outSize) - { - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - #ifdef _LZMA_IN_CB - if (rd.Result != LZMA_RESULT_OK) - return rd.Result; - #endif - if (rd.ExtraBytes != 0) - return LZMA_RESULT_DATA_ERROR; - if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - CProb *probs = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - if (previousIsMatch) - { - Byte matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); - previousIsMatch = 0; - } - else - previousByte = LzmaLiteralDecode(probs, &rd); - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - } - else - { - previousIsMatch = 1; - if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) - { - if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) - { - if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - if ( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - == 0) - return LZMA_RESULT_DATA_ERROR; - state = state < 7 ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - continue; - } - } - else - { - UInt32 distance; - if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) - distance = rep1; - else - { - if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) - distance = rep2; - else - { - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - len = LzmaLenDecode(p + RepLenCoder, &rd, posState); - state = state < 7 ? 8 : 11; - } - else - { - int posSlot; - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < 7 ? 7 : 10; - len = LzmaLenDecode(p + LenCoder, &rd, posState); - posSlot = RangeDecoderBitTreeDecode(p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits), kNumPosSlotBits, &rd); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); - if (posSlot < kEndPosModelIndex) - { - rep0 += RangeDecoderReverseBitTreeDecode( - p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); - } - else - { - rep0 += RangeDecoderDecodeDirectBits(&rd, - numDirectBits - kNumAlignBits) << kNumAlignBits; - rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); - } - } - else - rep0 = posSlot; - rep0++; - } - if (rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = -1; - break; - } - if (rep0 > nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - { - return LZMA_RESULT_DATA_ERROR; - } - len += kMatchMinLen; - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - len--; - } - while(len > 0 && nowPos < outSize); - } - } - - #ifdef _LZMA_OUT_READ - vs->RangeDecoder = rd; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + nowPos; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->PreviousIsMatch = previousIsMatch; - vs->RemainLen = len; - #endif - - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/image/ar7/src/LzmaDecode.h b/target/image/ar7/src/LzmaDecode.h deleted file mode 100644 index f58944e3c3..0000000000 --- a/target/image/ar7/src/LzmaDecode.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 -#define LZMA_RESULT_NOT_ENOUGH_MEM 2 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -/* -bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -bufferSize += 100 in case of _LZMA_OUT_READ -by default CProb is unsigned short, -but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -*/ - -#ifdef _LZMA_OUT_READ -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif -); -#endif - -int LzmaDecode( - unsigned char *buffer, - #ifndef _LZMA_OUT_READ - UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#endif diff --git a/target/image/ar7/src/gzip.h b/target/image/ar7/src/gzip.h deleted file mode 100644 index 917e66655c..0000000000 --- a/target/image/ar7/src/gzip.h +++ /dev/null @@ -1,51 +0,0 @@ -//bvb#include "timemmap.h" - -#define OF(args) args -#define STATIC static - -#define WSIZE 0x8000 /* Slideing window size (defined as var - * "window" below) must be at least 32k, - * and a power of two. This is the - * data work window used for input buffer - * by the input routine */ - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - - -static char *output_data; -static ulg output_ptr; - -#ifndef NULL -#define NULL 0 -#endif - -#define NOMEMCPY /* Does routine memcpy exist? */ - -//bvb static uch *inbuf; /* input buffer */ -static uch *window; - -//bvb static uch outwin[WSIZE]; - -//bvb static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to process in inbuf */ - -static unsigned outcnt; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */ -#define BMAX 16 /* maximum bit length of any code (16 for explode) */ -#define N_MAX 288 /* maximum number of codes in any set */ - -static char *input_data; - -static void *freememstart; diff --git a/target/image/ar7/src/ld.script.in b/target/image/ar7/src/ld.script.in deleted file mode 100644 index 40389e644f..0000000000 --- a/target/image/ar7/src/ld.script.in +++ /dev/null @@ -1,34 +0,0 @@ - OUTPUT_FORMAT("@@OUTPUT_FORMAT@@") - OUTPUT_ARCH(mips) -ENTRY(tikernelunzip) - SECTIONS -{ - - /* Allocate memory space on top of kernel bss space */ - . = 0x94200000; - .text : - { - *(.text) - *(.rodata) - *(.rodata1) - *(.gnu.warning) - *(.text.init) - *(.data.init) - } - - .data : - { - *(*) - } - - .bss : - { - *(.dynbss) - *(COMMON) - *(.bss) - *(.sbss) - *(.scommon) - . = ALIGN (0x8000); - workspace = .; - } -} diff --git a/target/image/ar7/src/loader.c b/target/image/ar7/src/loader.c deleted file mode 100644 index 22b909d7e9..0000000000 --- a/target/image/ar7/src/loader.c +++ /dev/null @@ -1,140 +0,0 @@ -/* inflate.c -- Not copyrighted 1992 by Mark Adler - version c10p1, 10 January 1993 */ - -/* - * Adapted for booting Linux by Hannu Savolainen 1993 - * based on gzip-1.0.3 - * - * Nicolas Pitre <nico@visuaide.com>, 1999/04/14 : - * Little mods for all variable to reside either into rodata or bss segments - * by marking constant variables with 'const' and initializing all the others - * at run-time only. This allows for the kernel uncompressor to run - * directly from Flash or ROM memory on embeded systems. - */ - -#include <linux/config.h> -#include "gzip.h" -#include "LzmaDecode.h" - -/* Function prototypes */ -unsigned char get_byte(void); -int tikernelunzip(int,char *[], char *[]); -static int tidecompress(uch *, uch *); - -void kernel_entry(int, char *[], char *[]); -void (*ke)(int, char *[], char *[]); /* Gen reference to kernel function */ -void (*prnt)(unsigned int, char *); /* Gen reference to Yamon print function */ -void printf(char *ptr); /* Generate our own printf */ - -int tikernelunzip(int argc, char *argv[], char *arge[]) -{ - extern unsigned int _ftext; - extern uch kernelimage[]; - uch *in, *out; - int status; - - printf("Launching kernel decompressor.\n"); - - out = (unsigned char *) LOADADDR; - in = &(kernelimage[0]); - - status = tidecompress(in, out); - - if (status == 0) { - printf("Kernel decompressor was successful ... launching kernel.\n"); - - ke = ( void(*)(int, char *[],char*[]))kernel_entry; - (*ke)(argc,argv,arge); - - return (0); - } else { - printf("Error in decompression.\n"); - return(1); - } -} - -#if 0 -char hex[] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'}; -void print_i(int i) -{ - int j; - char buf[11]; - - buf[0] = '0'; - buf[1] = 'x'; - buf[10] = 0; - - for (j = 0; j < 8; j++) - { - buf[2 + 7 - j] = hex[i & 0xf]; - i = i >> 4; - } - - printf(buf); -} -#endif - -int tidecompress(uch *indata, uch *outdata) -{ - extern unsigned int workspace; - extern unsigned char kernelimage[], kernelimage_end[]; - unsigned int i; /* temp value */ - unsigned int lc; /* literal context bits */ - unsigned int lp; /* literal pos state bits */ - unsigned int pb; /* pos state bits */ - unsigned int osize; /* uncompressed size */ - unsigned int wsize; /* window size */ - unsigned int insize = kernelimage_end - kernelimage; - int status; - - output_ptr = 0; - output_data = outdata; - input_data = indata; - - /* lzma args */ - i = get_byte(); - lc = i % 9, i = i / 9; - lp = i % 5, pb = i / 5; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - i = 0; - wsize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb); - - if ((status = LzmaDecode((unsigned char *) &workspace, wsize, lc, lp, pb, - indata + 13, insize - 13, (unsigned char *) output_data, osize, &i)) == LZMA_RESULT_OK) - return 0; - - return status; -} - - -void printf(char *ptr) -{ - unsigned int *tempptr = (unsigned int *)0x90000534; - prnt = ( void (*)(unsigned int, char *)) *tempptr; - (*prnt)(0,ptr); -} - -unsigned char get_byte() -{ - unsigned char c; - - c = *input_data; - input_data++; - - return c; -} - diff --git a/target/image/ar7/src/srec2bin.c b/target/image/ar7/src/srec2bin.c deleted file mode 100644 index 0eb8b2023a..0000000000 --- a/target/image/ar7/src/srec2bin.c +++ /dev/null @@ -1,523 +0,0 @@ -#include <stdio.h> -#include <ctype.h> - -//Rev 0.1 Original -// 8 Jan 2001 MJH Added code to write data to Binary file -// note: outputfile is name.bin, where name is first part -// of input file. ie tmp.rec -> tmp.bin -// -// srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian> -// -// TAG -// bit32u TAG_BIG = 0xDEADBE42; -// bit32u TAG_LITTLE = 0xFEEDFA42; -// -// File Structure -// -// TAG : 32 Bits -// [DATA RECORDS] -// -// Data Records Structure -// -// LENGTH : 32 Bits <- Length of DATA, excludes ADDRESS and CHECKSUM -// ADDRESS : 32 Bits -// DATA : 8 Bits * LENGTH -// CHECKSUM: 32 Bits <- 0 - (Sum of Length --> End of Data) -// -// Note : If Length == 0, Address will be Program Start -// -// -// -// -// - -#define MajRevNum 0 -#define MinRevNum 2 - - -#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) ) - -typedef unsigned char bit8u; -typedef unsigned int bit32u; -typedef int bit32; - -#define FALSE 0 -#define TRUE (!FALSE) - - -bit32u CheckSum; -int RecStart; -int debug; -int verbose; - -FILE *OpenOutputFile( char *Name ); -FILE *fOut; -bit32u RecLength=0; - -bit32u AddressCurrent; - -bit32u gh(char *cp,int nibs); - -int BigEndian; - -int inputline; - -// char buf[16*1024]; - -char buffer[2048]; -char *cur_ptr; -int cur_line=0; -int cur_len=0; - -int s1s2s3_total=0; - -bit32u PBVal; -int PBValid; -bit32u PBAdr; - - -void dumpfTell(char *s, bit32u Value) -{ - int Length; - Length = (int) RecLength; - if (debug) - printf("[%s ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n", - s, ftell(fOut), Length, Length, Value); -} - -void DispHex(bit32u Hex) -{ -// printf("%X", Hex); -} - -void WaitDisplay(void) -{ - static int Count=0; - static int Index=0; - char iline[]={"-\\|/"}; - - Count++; - if ((Count % 32)==0) - { - if (verbose) - printf("%c%c",iline[Index++],8); - Index &= 3; - } -} - - -void binOut32 ( bit32u Data ) -{ -// On UNIX machine all 32bit writes need ENDIAN switched -// Data = EndianSwitch(Data); -// fwrite( &Data, sizeof(bit32u), 1, fOut); - - char sdat[4]; - int i; - - for(i=0;i<4;i++) - sdat[i]=(char)(Data>>(i*8)); - fwrite( sdat, 1, 4, fOut); - dumpfTell("Out32" , Data); -} - -// Only update RecLength on Byte Writes -// All 32 bit writes will be for Length etc - -void binOut8 ( bit8u Data ) -{ - int n; - dumpfTell("B4Data" , (bit32u) (Data & 0xFF) ); - n = fwrite( &Data, sizeof(bit8u), 1, fOut); - if (n != 1) - printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent); - RecLength += 1; -} - -// Currently ONLY used for outputting Program Start - -void binRecStart(bit32u Address) -{ - RecLength = 0; - CheckSum = Address; - RecStart = TRUE; - - if (debug) - printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n", - CheckSum, RecLength, Address); - - - dumpfTell("RecLength", RecLength); - binOut32( RecLength ); - dumpfTell("Address", Address); - binOut32( Address ); -} - -void binRecEnd(void) -{ - long RecEnd; - - if (!RecStart) // if no record started, do not end it - { - return; - } - - RecStart = FALSE; - - - RecEnd = ftell(fOut); // Save Current position - - if (debug) - printf("[RecEnd ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n", - CheckSum, RecLength, RecLength, RecEnd); - - fseek( fOut, -((long) RecLength), SEEK_CUR); // move back Start Of Data - - dumpfTell("Data ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Address - - dumpfTell("Address ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Length - - dumpfTell("Length ", -1); - - binOut32( RecLength ); - - fseek( fOut, RecEnd, SEEK_SET); // move to end of Record - - CheckSum += RecLength; - - CheckSum = ~CheckSum + 1; // Two's complement - - binOut32( CheckSum ); - - if (verbose) - printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum); -} - -void binRecOutProgramStart(bit32u Address) -{ - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; -} -void binRecOutByte(bit32u Address, bit8u Data) -{ - // If Address is one after Current Address, output Byte - // If not, close out last record, update Length, write checksum - // Then Start New Record, updating Current Address - - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; - CheckSum += Data; - binOut8( Data ); -} - -//============================================================================= -// SUPPORT FUNCTIONS -//============================================================================= -int readline(FILE *fil,char *buf,int len) -{ - int rlen; - - rlen=0; - if (len==0) return(0); - while(1) - { - if (cur_len==0) - { - cur_len=fread(buffer, 1, sizeof(buffer), fil); - if (cur_len==0) - { - if (rlen) - { - *buf=0; - return(rlen); - } - return(-1); - } - cur_ptr=buffer; - } - if (cur_len) - { - if (*cur_ptr=='\n') - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - else - { - if ((len>1)&&(*cur_ptr!='\r')) - { - *buf++=*cur_ptr++; - len--; - } - else - cur_ptr++; - - rlen++; - cur_len--; - } - } - else - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - } -} - - -int SRLerrorout(char *c1,char *c2) -{ - printf("\nERROR: %s - '%s'.",c1,c2); - return(FALSE); -} - - -int checksum(char *cp,int count) -{ - char *scp; - int cksum; - int dum; - - scp=cp; - while(*scp) - { - if (!isxdigit(*scp++)) - return(SRLerrorout("Invalid hex digits",cp)); - } - scp=cp; - - cksum=count; - - while(count) - { - cksum += gh(scp,2); - if (count == 2) - dum = ~cksum; - scp += 2; - count--; - } - cksum&=0x0ff; - // printf("\nCk:%02x",cksum); - return(cksum==0x0ff); -} - -bit32u gh(char *cp,int nibs) -{ - int i; - bit32u j; - - j=0; - - for(i=0;i<nibs;i++) - { - j<<=4; - if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f; - if ((*cp>='0')&&(*cp<='9')) - j += (*cp-0x30); - else - if ((*cp>='A')&&(*cp<='F')) - j += (*cp-0x37); - else - SRLerrorout("Bad Hex char", cp); - cp++; - } - return(j); -} - - -//============================================================================= -// PROCESS SREC LINE -//============================================================================= - -int srecLine(char *pSrecLine) -{ - char *scp,ch; - int itmp,count,dat; - bit32u adr; - static bit32u RecordCounter=0; - - cur_line++; - scp=pSrecLine; - - if (*pSrecLine!='S') - return(SRLerrorout("Not an Srecord file",scp)); - pSrecLine++; - if (strlen(pSrecLine)<4) - return(SRLerrorout("Srecord too short",scp)); - - ch=*pSrecLine++; - - count=gh(pSrecLine,2); - - pSrecLine += 2; - - // if(debug) - // printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine); - RecordCounter++; - DispHex(RecordCounter); - - if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp)); - - if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp)); - - switch(ch) - { - case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp)); - break; - case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - count--; - while(count) - { - dat=gh(pSrecLine,2); pSrecLine+=2; count--; - binRecOutByte(adr, (char) (dat & 0xFF)); - adr++; - } - s1s2s3_total++; - break; - case '4': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp)); - break; - case '6': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '7': // PROGRAM START - if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp)); - binRecOutProgramStart(adr); - break; - case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - default: - break; - } - return(TRUE); -} - - -//============================================================================= -// MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY -//============================================================================= - -int srec2bin(int argc,char *argv[],int verbose) -{ - int i,rlen,sts; - FILE *fp; - char ac; - char buff[256]; - bit32u TAG_BIG = 0xDEADBE42; - bit32u TAG_LITTLE = 0xFEEDFA42; - - bit32u Tag; - - - if(argc < 3) - { - printf("\nError: <srec2bin <srec input file> <bin output file>\n\n"); - return(0); - } - - if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE; - - if (BigEndian) - Tag = TAG_BIG; - else - Tag = TAG_LITTLE; - - if (verbose) - printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag); - - fp = fopen(argv[1],"rt"); - - if (fp==NULL) - { - printf("\nError: Opening input file, %s.", argv[1]); - return(0); - } - - fOut = fopen( argv[2], "wb"); - - if (fOut==NULL) - { - printf("\nError: Opening Output file, %s.", argv[2]); - if(fp) fclose(fp); - return(0); - } - - RecStart = FALSE; - - AddressCurrent = 0xFFFFFFFFL; - - // Setup Tag - - dumpfTell("Tag", Tag); - - binOut32(Tag); - - - inputline=0; - sts=TRUE; - - rlen = readline(fp,buff,sizeof buff); - - while( (sts) && (rlen != -1)) - { - if (strlen(buff)) - { - sts &= srecLine(buff); - WaitDisplay(); - } - rlen = readline(fp,buff,sizeof buff); - } - - - // printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE); - - binRecEnd(); - - if(fp) fclose(fp); - if(fOut) fclose(fOut); - - return(1); -} - -main(int argc, char *argv[]) -{ - debug = TRUE; - debug = FALSE; - verbose = FALSE; - srec2bin(argc,argv,verbose); - return 0; -} - diff --git a/target/image/ar7/src/zimage.script.in b/target/image/ar7/src/zimage.script.in deleted file mode 100644 index 1a0865b086..0000000000 --- a/target/image/ar7/src/zimage.script.in +++ /dev/null @@ -1,11 +0,0 @@ - OUTPUT_FORMAT("@@OUTPUT_FORMAT@@") -OUTPUT_ARCH(mips) - SECTIONS -{ - .data : - { - kernelimage = .; - *(.data) - kernelimage_end = .; - } -} diff --git a/target/image/aruba/Makefile b/target/image/aruba/Makefile deleted file mode 100644 index 09aa8eabd4..0000000000 --- a/target/image/aruba/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -LOADADDR = 0x81000000 # RAM start + 16M -KERNEL_ENTRY = 0x80100000 -RAMSIZE = 0x00100000 # 1MB - -LOADER_MAKEOPTS= \ - KDIR=$(KDIR) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) \ - RAMSIZE=$(RAMSIZE) - -define Build/Clean - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean compile -endef - -define Image/BuildKernel - ./addVersion -n ArubaOS $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari version -endef - -define Image/Build/jffs2-64k - @dd if=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari of=$(KDIR)/image.tmp bs=655360 conv=sync - @cat $(KDIR)/root.$(1) >> $(KDIR)/image.tmp - mv $(KDIR)/image.tmp $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(patsubst jffs2-%,jffs2,$(1)).bin -endef - -define Image/Build - $(call Image/Build/$(1),$(1)) -endef - -$(eval $(call BuildImage)) diff --git a/target/image/aruba/addVersion b/target/image/aruba/addVersion Binary files differdeleted file mode 100755 index 796f73ad1b..0000000000 --- a/target/image/aruba/addVersion +++ /dev/null diff --git a/target/image/aruba/version b/target/image/aruba/version deleted file mode 100644 index fff5589e14..0000000000 --- a/target/image/aruba/version +++ /dev/null @@ -1 +0,0 @@ -3.0.0.0 diff --git a/target/image/au1000/Makefile b/target/image/au1000/Makefile deleted file mode 100644 index fa3f06e318..0000000000 --- a/target/image/au1000/Makefile +++ /dev/null @@ -1,55 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -LOADADDR = 0x81000000 # RAM start + 16M -KERNEL_ENTRY = 0x80100000 -RAMSIZE = 0x00100000 # 1MB - -FLASH_KERNEL := 0xBFD00000 -FLASH_FS := 0xBE000000 - -LOADER_MAKEOPTS= \ - KDIR=$(KDIR) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) \ - RAMSIZE=$(RAMSIZE) - -define Build/Clean - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean -endef - -DROP_SECTIONS := .reginfo .mdebug .comment .note .pdr .options .MIPS.options -OBJCOPY_KERNEL := $(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS)) - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - - # Build RAM image - $(MAKE) -C ../generic/lzma-loader \ - $(LOADER_MAKEOPTS) \ - clean compile - $(OBJCOPY_KERNEL) $(KDIR)/loader.elf $(KDIR)/kernel.ram.srec - - # Build Flash image - $(MAKE) -C ../generic/lzma-loader \ - $(LOADER_MAKEOPTS) \ - IMAGE_COPY=1 \ - LOADER_ENTRY=$(FLASH_KERNEL) \ - LOADER_TYPE=_flash \ - clean compile - $(OBJCOPY_KERNEL) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.srec -endef - -define Image/Build - $(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma $(FLASH_FS) $(KDIR)/root.$(1) $(KDIR)/root.$(1).srec - grep -v S7 $(KDIR)/root.$(1).srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img - grep -v S0 $(KDIR)/kernel.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img -endef - -$(eval $(call BuildImage)) diff --git a/target/image/brcm/Makefile b/target/image/brcm/Makefile deleted file mode 100644 index 6aad5581e7..0000000000 --- a/target/image/brcm/Makefile +++ /dev/null @@ -1,74 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Build/Compile - rm -f $(KDIR)/loader.gz - $(MAKE) -C lzma-loader \ - BUILD_DIR="$(KDIR)" \ - TARGET="$(KDIR)" \ - install - echo -ne "\\x00" >> $(KDIR)/loader.gz -endef - -define Build/Clean - $(MAKE) -C lzma-loader clean -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma -endef - -define Image/Build/wgt634u - dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(2).bin bs=131072 conv=sync - cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(KERNEL)-$(2).bin -endef - -define Image/Build/CyberTAN - $(STAGING_DIR)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(5).bin -endef - -define Image/Build/Motorola - $(STAGING_DIR)/bin/motorola-bin -$(3) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin -endef - -define Image/Build/USR - $(STAGING_DIR)/bin/trx2usr $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin -endef - -define trxalign/jffs2-128k --a 0x20000 -endef -define trxalign/jffs2-64k --a 0x10000 -endef -define trxalign/squashfs --a 1024 -endef - -define Image/Build - $(STAGING_DIR)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1) -ifneq ($(1),jffs2-128k) - $(call Image/Build/CyberTAN,$(1),wrt54g3g,W54F,1.99.5,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.40.1,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1))) -endif -ifneq ($(1),jffs2-64k) - $(call Image/Build/CyberTAN,$(1),wrt54gs,W54S,4.80.1,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/CyberTAN,$(1),wrtsl54gs,W54U,2.00.5,$(patsubst jffs2-%,jffs2,$(1))) -ifeq ($(KERNEL),2.6) - $(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1))) -endif -endif - $(call Image/Build/Motorola,$(1),wr850g,1,$(1)) - $(call Image/Build/USR,$(1),usr5461,$(1)) -endef - -$(eval $(call BuildImage)) diff --git a/target/image/brcm/lzma-loader/Makefile b/target/image/brcm/lzma-loader/Makefile deleted file mode 100644 index b56cbaab0f..0000000000 --- a/target/image/brcm/lzma-loader/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id$ - -include $(TOPDIR)/rules.mk - -PKG_NAME := lzma-loader -PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared - $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \ - LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)" - -download: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: $(PKG_BUILD_DIR)/loader.gz -install: - -ifneq ($(TARGET),) -install: compile - $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/ -endif - -clean: - rm -rf $(PKG_BUILD_DIR) diff --git a/target/image/brcm/lzma-loader/src/LzmaDecode.c b/target/image/brcm/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index 951700bddf..0000000000 --- a/target/image/brcm/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,663 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -typedef struct _CRangeDecoder -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback; - int Result; - #endif - int ExtraBytes; -} CRangeDecoder; - -Byte RangeDecoderReadByte(CRangeDecoder *rd) -{ - if (rd->Buffer == rd->BufferLim) - { - #ifdef _LZMA_IN_CB - UInt32 size; - rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); - rd->BufferLim = rd->Buffer + size; - if (size == 0) - #endif - { - rd->ExtraBytes = 1; - return 0xFF; - } - } - return (*rd->Buffer++); -} - -/* #define ReadByte (*rd->Buffer++) */ -#define ReadByte (RangeDecoderReadByte(rd)) - -void RangeDecoderInit(CRangeDecoder *rd, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - Byte *stream, UInt32 bufferSize - #endif - ) -{ - int i; - #ifdef _LZMA_IN_CB - rd->InCallback = inCallback; - rd->Buffer = rd->BufferLim = 0; - #else - rd->Buffer = stream; - rd->BufferLim = stream + bufferSize; - #endif - rd->ExtraBytes = 0; - rd->Code = 0; - rd->Range = (0xFFFFFFFF); - for(i = 0; i < 5; i++) - rd->Code = (rd->Code << 8) | ReadByte; -} - -#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; -#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; -#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } - -UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) -{ - RC_INIT_VAR - UInt32 result = 0; - int i; - for (i = numTotalBits; i > 0; i--) - { - /* UInt32 t; */ - range >>= 1; - - result <<= 1; - if (code >= range) - { - code -= range; - result |= 1; - } - /* - t = (code - range) >> 31; - t &= 1; - code -= range & (t - 1); - result = (result + result) | (1 - t); - */ - RC_NORMALIZE - } - RC_FLUSH_VAR - return result; -} - -int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) -{ - UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; - if (rd->Code < bound) - { - rd->Range = bound; - *prob += (kBitModelTotal - *prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 0; - } - else - { - rd->Range -= bound; - rd->Code -= bound; - *prob -= (*prob) >> kNumMoveBits; - if (rd->Range < kTopValue) - { - rd->Code = (rd->Code << 8) | ReadByte; - rd->Range <<= 8; - } - return 1; - } -} - -#define RC_GET_BIT2(prob, mi, A0, A1) \ - UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ - if (code < bound) \ - { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ - else \ - { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ - RC_NORMALIZE - -#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) - -int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = numLevels; i > 0; i--) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT(prob, mi) - #else - mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return mi - (1 << numLevels); -} - -int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) -{ - int mi = 1; - int i; - int symbol = 0; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - for(i = 0; i < numLevels; i++) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + mi; - RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) - #else - int bit = RangeDecoderBitDecode(probs + mi, rd); - mi = mi + mi + bit; - symbol |= (bit << i); - #endif - } - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) -{ - int symbol = 1; - #ifdef _LZMA_LOC_OPT - RC_INIT_VAR - #endif - do - { - int bit; - int matchBit = (matchByte >> 7) & 1; - matchByte <<= 1; - #ifdef _LZMA_LOC_OPT - { - CProb *prob = probs + ((1 + matchBit) << 8) + symbol; - RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) - } - #else - bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); - symbol = (symbol << 1) | bit; - #endif - if (matchBit != bit) - { - while (symbol < 0x100) - { - #ifdef _LZMA_LOC_OPT - CProb *prob = probs + symbol; - RC_GET_BIT(prob, symbol) - #else - symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); - #endif - } - break; - } - } - while (symbol < 0x100); - #ifdef _LZMA_LOC_OPT - RC_FLUSH_VAR - #endif - return symbol; -} - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - -int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) -{ - if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) - return RangeDecoderBitTreeDecode(p + LenLow + - (posState << kLenNumLowBits), kLenNumLowBits, rd); - if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) - return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + - (posState << kLenNumMidBits), kLenNumMidBits, rd); - return kLenNumLowSymbols + kLenNumMidSymbols + - RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); -} - -#define kNumStates 12 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#ifdef _LZMA_OUT_READ - -typedef struct _LzmaVarState -{ - CRangeDecoder RangeDecoder; - Byte *Dictionary; - UInt32 DictionarySize; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 Reps[4]; - int lc; - int lp; - int pb; - int State; - int PreviousIsMatch; - int RemainLen; -} LzmaVarState; - -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif - ) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - UInt32 i; - if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - vs->Dictionary = dictionary; - vs->DictionarySize = dictionarySize; - vs->DictionaryPos = 0; - vs->GlobalPos = 0; - vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; - vs->lc = lc; - vs->lp = lp; - vs->pb = pb; - vs->State = 0; - vs->PreviousIsMatch = 0; - vs->RemainLen = 0; - dictionary[dictionarySize - 1] = 0; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&vs->RangeDecoder, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); - return LZMA_RESULT_OK; -} - -int LzmaDecode(unsigned char *buffer, - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - CRangeDecoder rd = vs->RangeDecoder; - int state = vs->State; - int previousIsMatch = vs->PreviousIsMatch; - Byte previousByte; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << (vs->pb)) - 1; - UInt32 literalPosMask = (1 << (vs->lp)) - 1; - int lc = vs->lc; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - if (len == -1) - { - *outSizeProcessed = 0; - return LZMA_RESULT_OK; - } - - while(len > 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; -#else - -int LzmaDecode( - Byte *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - CProb *p = (CProb *)buffer; - CRangeDecoder rd; - UInt32 i; - int state = 0; - int previousIsMatch = 0; - Byte previousByte = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << pb) - 1; - UInt32 literalPosMask = (1 << lp) - 1; - int len = 0; - if (bufferSize < numProbs * sizeof(CProb)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - RangeDecoderInit(&rd, - #ifdef _LZMA_IN_CB - inCallback - #else - inStream, inSize - #endif - ); -#endif - - *outSizeProcessed = 0; - while(nowPos < outSize) - { - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - #ifdef _LZMA_IN_CB - if (rd.Result != LZMA_RESULT_OK) - return rd.Result; - #endif - if (rd.ExtraBytes != 0) - return LZMA_RESULT_DATA_ERROR; - if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - CProb *probs = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - if (previousIsMatch) - { - Byte matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); - previousIsMatch = 0; - } - else - previousByte = LzmaLiteralDecode(probs, &rd); - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - } - else - { - previousIsMatch = 1; - if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) - { - if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) - { - if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - if ( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - == 0) - return LZMA_RESULT_DATA_ERROR; - state = state < 7 ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - continue; - } - } - else - { - UInt32 distance; - if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) - distance = rep1; - else - { - if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) - distance = rep2; - else - { - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - len = LzmaLenDecode(p + RepLenCoder, &rd, posState); - state = state < 7 ? 8 : 11; - } - else - { - int posSlot; - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < 7 ? 7 : 10; - len = LzmaLenDecode(p + LenCoder, &rd, posState); - posSlot = RangeDecoderBitTreeDecode(p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits), kNumPosSlotBits, &rd); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); - if (posSlot < kEndPosModelIndex) - { - rep0 += RangeDecoderReverseBitTreeDecode( - p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); - } - else - { - rep0 += RangeDecoderDecodeDirectBits(&rd, - numDirectBits - kNumAlignBits) << kNumAlignBits; - rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); - } - } - else - rep0 = posSlot; - rep0++; - } - if (rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = -1; - break; - } - if (rep0 > nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - { - return LZMA_RESULT_DATA_ERROR; - } - len += kMatchMinLen; - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - len--; - } - while(len > 0 && nowPos < outSize); - } - } - - #ifdef _LZMA_OUT_READ - vs->RangeDecoder = rd; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + nowPos; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->PreviousIsMatch = previousIsMatch; - vs->RemainLen = len; - #endif - - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/image/brcm/lzma-loader/src/LzmaDecode.h b/target/image/brcm/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index f58944e3c3..0000000000 --- a/target/image/brcm/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 -#define LZMA_RESULT_NOT_ENOUGH_MEM 2 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -/* -bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -bufferSize += 100 in case of _LZMA_OUT_READ -by default CProb is unsigned short, -but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -*/ - -#ifdef _LZMA_OUT_READ -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif -); -#endif - -int LzmaDecode( - unsigned char *buffer, - #ifndef _LZMA_OUT_READ - UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#endif diff --git a/target/image/brcm/lzma-loader/src/Makefile b/target/image/brcm/lzma-loader/src/Makefile deleted file mode 100644 index 85a864674b..0000000000 --- a/target/image/brcm/lzma-loader/src/Makefile +++ /dev/null @@ -1,77 +0,0 @@ -# -# Makefile for Broadcom BCM947XX boards -# -# Copyright 2001-2003, Broadcom Corporation -# All Rights Reserved. -# -# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -# -# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org> -# Modified to support bzip'd kernels. -# Of course, it would be better to integrate bunzip capability into CFE. -# -# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su> -# Cleaned up, modified for lzma support, removed from kernel -# - -TEXT_START := 0x80001000 -BZ_TEXT_START := 0x80300000 - -OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -ffunction-sections -pipe -mlong-calls -fno-common \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) - -SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/ - -OBJECTS := head.o data.o - -all: loader.gz loader.elf - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -loader.gz: loader - gzip -nc9 $< > $@ - -loader.elf: loader.o - cp $< $@ - -loader: loader.o - $(OBJCOPY) $< $@ - -loader.o: loader.lds $(OBJECTS) - $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS) - -loader.lds: loader.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ - -data.o: data.lds decompress.image - $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips - -data.lds: - @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ - -decompress.image: decompress - $(OBJCOPY) $< $@ - -decompress: decompress.lds decompress.o LzmaDecode.o - $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o - -decompress.lds: decompress.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ - -mrproper: clean - -clean: - rm -f loader.gz loader decompress *.lds *.o *.image diff --git a/target/image/brcm/lzma-loader/src/README b/target/image/brcm/lzma-loader/src/README deleted file mode 100644 index 16649e9500..0000000000 --- a/target/image/brcm/lzma-loader/src/README +++ /dev/null @@ -1,55 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -The code is intended to decompress kernel, being compressed using lzma utility -build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory - -decompressor code expects that your .trx file consist of three partitions: - -1) decompressor itself (this is gziped code which pmon/cfe will extract and run -on boot-up instead of real kernel) -2) LZMA compressed kernel (both streamed and regular modes are supported now) -3) Root filesystem - -Please be sure to apply the following patch for use this new trx layout (it will -allow using both new and old trx files for root filesystem lookup code) - ---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 -+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 -@@ -221,7 +221,9 @@ - /* Try looking at TRX header for rootfs offset */ - if (le32_to_cpu(trx->magic) == TRX_MAGIC) { - bcm947xx_parts[1].offset = off; -- if (le32_to_cpu(trx->offsets[1]) > off) -+ if (le32_to_cpu(trx->offsets[2]) > off) -+ off = le32_to_cpu(trx->offsets[2]); -+ else if (le32_to_cpu(trx->offsets[1]) > off) - off = le32_to_cpu(trx->offsets[1]); - continue; - } - - -Revision history: - 0.02 Initial release - 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual - output size to decoder (stream mode compressed input is not - a requirement anymore) - 0.04 Reordered functions using lds script diff --git a/target/image/brcm/lzma-loader/src/decompress.c b/target/image/brcm/lzma-loader/src/decompress.c deleted file mode 100644 index ec510e21e3..0000000000 --- a/target/image/brcm/lzma-loader/src/decompress.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Please note, this was code based on the bunzip2 decompressor code - * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left - * is an idea and part of original vendor code - * - * - * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com> - * pass actual output size to decoder (stream mode - * compressed input is not a requirement anymore) - * - * 24-Apr-2005 Oleg I. Vdovikin - * reordered functions using lds script, removed forward decl - * - */ - -#include "LzmaDecode.h" - -#define BCM4710_FLASH 0x1fc00000 /* Flash */ - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -#define cache_unroll(base,op) \ - __asm__ __volatile__( \ - ".set noreorder;\n" \ - ".set mips3;\n" \ - "cache %1, (%0);\n" \ - ".set mips0;\n" \ - ".set reorder\n" \ - : \ - : "r" (base), \ - "i" (op)); - -static __inline__ void blast_icache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += lsize; - } -} - -static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += lsize; - } -} - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ - -struct trx_header { - unsigned int magic; /* "HDR0" */ - unsigned int len; /* Length of file including header */ - unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ - unsigned int flag_version; /* 0:15 flags, 16:31 version */ - unsigned int offsets[3]; /* Offsets of partitions from start of header */ -}; - -/* beyound the image end, size not known in advance */ -extern unsigned char workspace[]; - -unsigned int offset; -unsigned char *data; - -/* flash access should be aligned, so wrapper is used */ -/* read byte from the flash, all accesses are 32-bit aligned */ -static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) -{ - static unsigned int val; - - if (((unsigned int)offset % 4) == 0) { - val = *(unsigned int *)data; - data += 4; - } - - *bufferSize = 1; - *buffer = ((unsigned char *)&val) + (offset++ & 3); - - return LZMA_RESULT_OK; -} - -static __inline__ unsigned char get_byte(void) -{ - unsigned char *buffer; - UInt32 fake; - - return read_byte(0, &buffer, &fake), *buffer; -} - -/* should be the first function */ -void entry(unsigned long icache_size, unsigned long icache_lsize, - unsigned long dcache_size, unsigned long dcache_lsize) -{ - unsigned int i; /* temp value */ - unsigned int lc; /* literal context bits */ - unsigned int lp; /* literal pos state bits */ - unsigned int pb; /* pos state bits */ - unsigned int osize; /* uncompressed size */ - - ILzmaInCallback callback; - callback.Read = read_byte; - - /* look for trx header, 32-bit data access */ - for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH)); - ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536); - - /* compressed kernel is in the partition 0 or 1 */ - if (((struct trx_header *)data)->offsets[1] > 65536) - data += ((struct trx_header *)data)->offsets[0]; - else - data += ((struct trx_header *)data)->offsets[1]; - - offset = 0; - - /* lzma args */ - i = get_byte(); - lc = i % 9, i = i / 9; - lp = i % 5, pb = i / 5; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - /* decompress kernel */ - if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback, - (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK) - { - blast_dcache(dcache_size, dcache_lsize); - blast_icache(icache_size, icache_lsize); - - /* Jump to load address */ - ((void (*)(void)) LOADADDR)(); - } -} diff --git a/target/image/brcm/lzma-loader/src/decompress.lds.in b/target/image/brcm/lzma-loader/src/decompress.lds.in deleted file mode 100644 index 33f56f8a09..0000000000 --- a/target/image/brcm/lzma-loader/src/decompress.lds.in +++ /dev/null @@ -1,20 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(entry) -SECTIONS { - . = BZ_TEXT_START; - .text : { - *(.text.entry) - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } - - workspace = .; -} diff --git a/target/image/brcm/lzma-loader/src/head.S b/target/image/brcm/lzma-loader/src/head.S deleted file mode 100644 index 9bfbd53d51..0000000000 --- a/target/image/brcm/lzma-loader/src/head.S +++ /dev/null @@ -1,155 +0,0 @@ -/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ -/* cache manipulation adapted from Broadcom code */ -/* idea taken from original bunzip2 decompressor code */ -/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ -/* Licensed under the linux kernel's version of the GPL.*/ - -#include <asm/asm.h> -#include <asm/regdef.h> - -#define KSEG0 0x80000000 - -#define C0_CONFIG $16 -#define C0_TAGLO $28 -#define C0_TAGHI $29 - -#define CONF1_DA_SHIFT 7 /* D$ associativity */ -#define CONF1_DA_MASK 0x00000380 -#define CONF1_DA_BASE 1 -#define CONF1_DL_SHIFT 10 /* D$ line size */ -#define CONF1_DL_MASK 0x00001c00 -#define CONF1_DL_BASE 2 -#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -#define CONF1_DS_MASK 0x0000e000 -#define CONF1_DS_BASE 64 -#define CONF1_IA_SHIFT 16 /* I$ associativity */ -#define CONF1_IA_MASK 0x00070000 -#define CONF1_IA_BASE 1 -#define CONF1_IL_SHIFT 19 /* I$ line size */ -#define CONF1_IL_MASK 0x00380000 -#define CONF1_IL_BASE 2 -#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -#define CONF1_IS_MASK 0x01c00000 -#define CONF1_IS_BASE 64 - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - - .text - LEAF(startup) - .set noreorder - - /* Copy decompressor code to the right place */ - li t2, BZ_TEXT_START - add a0, t2, 0 - la a1, code_start - la a2, code_stop -$L1: - lw t0, 0(a1) - sw t0, 0(a0) - add a1, 4 - add a0, 4 - blt a1, a2, $L1 - nop - - /* At this point we need to invalidate dcache and */ - /* icache before jumping to new code */ - -1: /* Get cache sizes */ - .set mips32 - mfc0 s0,C0_CONFIG,1 - .set mips0 - - li s1,CONF1_DL_MASK - and s1,s0 - beq s1,zero,nodc - nop - - srl s1,CONF1_DL_SHIFT - li t0,CONF1_DL_BASE - sll s1,t0,s1 /* s1 has D$ cache line size */ - - li s2,CONF1_DA_MASK - and s2,s0 - srl s2,CONF1_DA_SHIFT - addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ - - li t0,CONF1_DS_MASK - and t0,s0 - srl t0,CONF1_DS_SHIFT - li s3,CONF1_DS_BASE - sll s3,s3,t0 /* s3 has D$ sets per way */ - - multu s2,s3 /* sets/way * associativity */ - mflo t0 /* total cache lines */ - - multu s1,t0 /* D$ linesize * lines */ - mflo s2 /* s2 is now D$ size in bytes */ - - /* Initilize the D$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s2 /* + size of cache == end */ - - .set mips3 -1: cache Index_Writeback_Inv_D,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s1 - -nodc: - /* Now we get to do it all again for the I$ */ - - move s3,zero /* just in case there is no icache */ - move s4,zero - - li t0,CONF1_IL_MASK - and t0,s0 - beq t0,zero,noic - nop - - srl t0,CONF1_IL_SHIFT - li s3,CONF1_IL_BASE - sll s3,t0 /* s3 has I$ cache line size */ - - li t0,CONF1_IA_MASK - and t0,s0 - srl t0,CONF1_IA_SHIFT - addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ - - li t0,CONF1_IS_MASK - and t0,s0 - srl t0,CONF1_IS_SHIFT - li s5,CONF1_IS_BASE - sll s5,t0 /* s5 has I$ sets per way */ - - multu s4,s5 /* sets/way * associativity */ - mflo t0 /* s4 is now total cache lines */ - - multu s3,t0 /* I$ linesize * lines */ - mflo s4 /* s4 is cache size in bytes */ - - /* Initilize the I$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s4 /* + size of cache == end */ - - .set mips3 -1: cache Index_Invalidate_I,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s3 - -noic: - move a0,s3 /* icache line size */ - move a1,s4 /* icache size */ - move a2,s1 /* dcache line size */ - jal t2 - move a3,s2 /* dcache size */ - - .set reorder - END(startup) diff --git a/target/image/brcm/lzma-loader/src/loader.lds.in b/target/image/brcm/lzma-loader/src/loader.lds.in deleted file mode 100644 index 20f2ea98ec..0000000000 --- a/target/image/brcm/lzma-loader/src/loader.lds.in +++ /dev/null @@ -1,17 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(startup) -SECTIONS { - . = TEXT_START; - .text : { - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } -} diff --git a/target/image/brcm63xx/Makefile b/target/image/brcm63xx/Makefile deleted file mode 100644 index 6aa72c2920..0000000000 --- a/target/image/brcm63xx/Makefile +++ /dev/null @@ -1,33 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -LOADADDR = 0x8108c8f4 # RAM start + 16M -KERNEL_ENTRY = 0x80100000 # Default kernel entry in arch/mips/Makefile -RAMSIZE = 0x01000000 # 64MB - -LOADER_MAKEOPTS= \ - KDIR=$(KDIR) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) \ - RAMSIZE=$(RAMSIZE) - -define Build/Clean - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) compile -endef - -define Image/Build - cp $(KDIR)/vmlinux $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img -endef - -$(eval $(call BuildImage)) diff --git a/target/image/generic/Makefile b/target/image/generic/Makefile deleted file mode 100644 index 64b294d76e..0000000000 --- a/target/image/generic/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -# use default targets for everything - -$(eval $(call BuildImage)) diff --git a/target/image/generic/lzma-loader/Makefile b/target/image/generic/lzma-loader/Makefile deleted file mode 100644 index e3a98afbce..0000000000 --- a/target/image/generic/lzma-loader/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id: Makefile 1823 2005-09-01 20:07:42Z nbd $ - -include $(TOPDIR)/rules.mk - -PKG_NAME := loader -PKG_VERSION := 0.05 - -PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)-$(PKG_VERSION)$(LOADER_TYPE) - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -$(PKG_BUILD_DIR)/lzma.elf: $(PKG_BUILD_DIR)/.prepared $(PKG_BUILD_DIR)/vmlinux.lzma - PATH="$(TARGET_PATH)" $(MAKE) -C $(PKG_BUILD_DIR) \ - CC="$(TARGET_CC)" CROSS_COMPILE="$(TARGET_CROSS)" \ - RAMSIZE=$(RAMSIZE) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) \ - IMAGE_COPY=$(IMAGE_COPY) - - -$(PKG_BUILD_DIR)/vmlinux.lzma: $(KDIR)/vmlinux.lzma - $(CP) $< $@ - -$(KDIR)/loader$(LOADER_TYPE).elf: $(PKG_BUILD_DIR)/lzma.elf - $(CP) $< $@ - -download: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: $(KDIR)/loader$(LOADER_TYPE).elf -install: - -clean: - rm -rf $(PKG_BUILD_DIR) - rm -f $(KDIR)/loader.elf diff --git a/target/image/generic/lzma-loader/src/LzmaDecode.c b/target/image/generic/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index c90a0d3ef4..0000000000 --- a/target/image/generic/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.22 Copyright (c) 1999-2005 Igor Pavlov (2005-06-10) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#if 0 -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - #ifdef _LZMA_OUT_READ - { - int i; - propsRes->DictionarySize = 0; - for (i = 0; i < 4; i++) - propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); - if (propsRes->DictionarySize == 0) - propsRes->DictionarySize = 1; - } - #endif - return LZMA_RESULT_OK; -} -#endif - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - #ifdef _LZMA_OUT_READ - - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - const Byte *Buffer = vs->Buffer; - const Byte *BufferLim = vs->BufferLim; - #else - const Byte *Buffer = inStream; - const Byte *BufferLim = inStream + inSize; - #endif - int state = vs->State; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - UInt32 distanceLimit = vs->DistanceLimit; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->Properties.DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - if (len == kLzmaStreamWasFinishedId) - return LZMA_RESULT_OK; - - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == kLzmaNeedInitId) - { - { - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - UInt32 i; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - rep0 = rep1 = rep2 = rep3 = 1; - state = 0; - globalPos = 0; - distanceLimit = 0; - dictionaryPos = 0; - dictionary[dictionarySize - 1] = 0; - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - } - len = 0; - } - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; - - #else /* if !_LZMA_OUT_READ */ - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - - #endif /* _LZMA_OUT_READ */ - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - - #ifdef _LZMA_OUT_READ - if (distanceLimit == 0) - #else - if (nowPos == 0) - #endif - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - #endif - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - #ifdef _LZMA_OUT_READ - if (rep0 > distanceLimit) - #else - if (rep0 > nowPos) - #endif - return LZMA_RESULT_DATA_ERROR; - - #ifdef _LZMA_OUT_READ - if (dictionarySize - distanceLimit > (UInt32)len) - distanceLimit += len; - else - distanceLimit = dictionarySize; - #endif - - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + (UInt32)nowPos; - vs->DistanceLimit = distanceLimit; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - #ifdef _LZMA_IN_CB - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - #else - *inSizeProcessed = (SizeT)(Buffer - inStream); - #endif - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/image/generic/lzma-loader/src/LzmaDecode.h b/target/image/generic/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index 213062af12..0000000000 --- a/target/image/generic/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.21 Copyright (c) 1999-2005 Igor Pavlov (2005-06-08) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -/* #define _LZMA_SYSTEM_SIZE_T */ -/* Use system's size_t. You can use it to enable 64-bit sizes supporting*/ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifndef SizeT -#ifdef _LZMA_SYSTEM_SIZE_T -#include <stddef.h> -#define SizeT size_t -#else -#define SizeT UInt32 -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; - #ifdef _LZMA_OUT_READ - UInt32 DictionarySize; - #endif -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - #ifdef _LZMA_IN_CB - const unsigned char *Buffer; - const unsigned char *BufferLim; - #endif - - #ifdef _LZMA_OUT_READ - unsigned char *Dictionary; - UInt32 Range; - UInt32 Code; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 DistanceLimit; - UInt32 Reps[4]; - int State; - int RemainLen; - unsigned char TempDictionary[4]; - #endif -} CLzmaDecoderState; - -#ifdef _LZMA_OUT_READ -#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } -#endif - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/target/image/generic/lzma-loader/src/Makefile b/target/image/generic/lzma-loader/src/Makefile deleted file mode 100644 index dbe9019f2b..0000000000 --- a/target/image/generic/lzma-loader/src/Makefile +++ /dev/null @@ -1,64 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -LOADADDR = 0x80400000 # RAM start + 4M -KERNEL_ENTRY = 0x80001000 -RAMSIZE = 0x00100000 # 1MB -IMAGE_COPY:=0 - -CROSS_COMPILE = mips-linux- - -OBJCOPY:= $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S -CFLAGS := -fno-builtin -Os -G 0 -ffunction-sections -mno-abicalls -fno-pic -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -Wall -DRAMSIZE=${RAMSIZE} -DKERNEL_ENTRY=${KERNEL_ENTRY} -D_LZMA_IN_CB -ifeq ($(IMAGE_COPY),1) -CFLAGS += -DLOADADDR=${LOADADDR} -DIMAGE_COPY=1 -endif - -.S.s: - $(CPP) $(CFLAGS) $< -o $*.s -.S.o: - $(CC) $(CFLAGS) -c $< -o $*.o -.c.o: - $(CC) $(CFLAGS) -c $< -o $*.o - -CC = $(CROSS_COMPILE)gcc -LD = $(CROSS_COMPILE)ld -OBJDUMP = $(CROSS_COMPILE)objdump - -O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) - -# Drop some uninteresting sections in the kernel. -# This is only relevant for ELF kernels but doesn't hurt a.out -drop-sections = .reginfo .mdebug .comment -strip-flags = $(addprefix --remove-section=,$(drop-sections)) - -all : lzma.elf - -lzma.lds: lzma.lds.in - sed -e 's,@LOADADDR@,$(LOADADDR),g' -e 's,@ENTRY@,_start,g' $< >$@ - -kernel.o: vmlinux.lzma lzma.lds - $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $< - -ifeq ($(IMAGE_COPY),1) -LOADER_ENTRY ?= $(KERNEL_ENTRY) -lzma.o: decompress.o LzmaDecode.o kernel.o - sed -e 's,@LOADADDR@,$(LOADADDR),g' -e 's,@ENTRY@,entry,g' lzma.lds.in >lzma-stage2.lds - $(LD) -static --no-warn-mismatch -e entry -Tlzma-stage2.lds -o temp-$@ $^ - $(OBJCOPY) temp-$@ lzma.tmp - @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > lzma-data.lds - $(LD) -no-warn-mismatch -T lzma-data.lds -r -o $@ -b binary lzma.tmp --oformat $(O_FORMAT) - -lzma.elf: start.o lzma.o - sed -e 's,@LOADADDR@,$(LOADER_ENTRY),g' lzma-copy.lds.in >lzma-copy.lds - $(LD) -s -Tlzma-copy.lds -o $@ $^ -else -lzma.elf: start.o decompress.o LzmaDecode.o kernel.o - $(LD) -s -Tlzma.lds -o $@ $^ -endif - -clean: - rm -f *.o lzma.elf *.tmp *.lds diff --git a/target/image/generic/lzma-loader/src/decompress.c b/target/image/generic/lzma-loader/src/decompress.c deleted file mode 100644 index 4ed432d1a5..0000000000 --- a/target/image/generic/lzma-loader/src/decompress.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Please note, this was code based on the bunzip2 decompressor code - * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left - * is an idea and part of original vendor code - * - * - * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com> - * pass actual output size to decoder (stream mode - * compressed input is not a requirement anymore) - * - * 24-Apr-2005 Oleg I. Vdovikin - * reordered functions using lds script, removed forward decl - * - * ??-Nov-2005 Mike Baker - * reorder the script as an lzma wrapper; do not depend on flash access - */ - -#include "LzmaDecode.h" - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -#define cache_unroll(base,op) \ - __asm__ __volatile__( \ - ".set noreorder;\n" \ - ".set mips3;\n" \ - "cache %1, (%0);\n" \ - ".set mips0;\n" \ - ".set reorder\n" \ - : \ - : "r" (base), \ - "i" (op)); - - -static __inline__ void blast_icache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += lsize; - } -} - -static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += lsize; - } -} - -unsigned char *data; - -static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) -{ - *bufferSize = 1; - *buffer = data; - ++data; - return LZMA_RESULT_OK; -} - -static __inline__ unsigned char get_byte(void) -{ - unsigned char *buffer; - UInt32 fake; - - return read_byte(0, &buffer, &fake), *buffer; -} - -static char *buffer = (char *)0x80C00000; -extern char lzma_start[]; -extern char lzma_end[]; - -/* should be the first function */ -void entry(unsigned long icache_size, unsigned long icache_lsize, - unsigned long dcache_size, unsigned long dcache_lsize) -{ - unsigned int i; /* temp value */ - unsigned int osize; /* uncompressed size */ - volatile unsigned int arg0, arg1, arg2, arg3; - - /* restore argument registers */ - __asm__ __volatile__ ("ori %0, $12, 0":"=r"(arg0)); - __asm__ __volatile__ ("ori %0, $13, 0":"=r"(arg1)); - __asm__ __volatile__ ("ori %0, $14, 0":"=r"(arg2)); - __asm__ __volatile__ ("ori %0, $15, 0":"=r"(arg3)); - - ILzmaInCallback callback; - CLzmaDecoderState vs; - callback.Read = read_byte; - - data = lzma_start; - - /* lzma args */ - i = get_byte(); - vs.Properties.lc = i % 9, i = i / 9; - vs.Properties.lp = i % 5, vs.Properties.pb = i / 5; - - vs.Probs = (CProb *)buffer; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - /* decompress kernel */ - if ((i = LzmaDecode(&vs, &callback, - (unsigned char*)KERNEL_ENTRY, osize, &osize)) == LZMA_RESULT_OK) - { - blast_dcache(dcache_size, dcache_lsize); - blast_icache(icache_size, icache_lsize); - - /* Jump to load address */ - ((void (*)(int a0, int a1, int a2, int a3)) KERNEL_ENTRY)(arg0, arg1, arg2, arg3); - } -} diff --git a/target/image/generic/lzma-loader/src/lzma-copy.lds.in b/target/image/generic/lzma-loader/src/lzma-copy.lds.in deleted file mode 100644 index fbc87ab8e2..0000000000 --- a/target/image/generic/lzma-loader/src/lzma-copy.lds.in +++ /dev/null @@ -1,20 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(_start) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = @LOADADDR@; - .text : - { - _ftext = . ; - *(.text) - *(.rodata) - } =0 - - .reginfo : { *(.reginfo) } - - .bss : - { - *(.bss) - } -} diff --git a/target/image/generic/lzma-loader/src/lzma.lds.in b/target/image/generic/lzma-loader/src/lzma.lds.in deleted file mode 100644 index 6021cec014..0000000000 --- a/target/image/generic/lzma-loader/src/lzma.lds.in +++ /dev/null @@ -1,24 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(@ENTRY@) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = @LOADADDR@; - .text : - { - _ftext = . ; - *(.text.entry) - *(.text) - *(.rodata) - lzma_start = .; - kernel.o - lzma_end = .; - } =0 - - .reginfo : { *(.reginfo) } - - .bss : - { - *(.bss) - } -} diff --git a/target/image/generic/lzma-loader/src/print.c b/target/image/generic/lzma-loader/src/print.c deleted file mode 100644 index 950687beff..0000000000 --- a/target/image/generic/lzma-loader/src/print.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "print.h" - -/* macros */ -#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) -#define Ctod(x) ( (x) - '0') - -/* forward declaration */ -extern int PrintChar(char *, char, int, int); -extern int PrintString(char *, char *, int, int); -extern int PrintNum(char *, unsigned long, int, int, int, int, char, int); - -/* private variable */ -static const char theFatalMsg[] = "fatal error in lp_Print!"; - -/* -*- - * A low level printf() function. - */ -void -lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap) -{ - -#define OUTPUT(arg, s, l) \ - { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ - (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ - } else { \ - (*output)(arg, s, l); \ - } \ - } - - char buf[LP_MAX_BUF]; - - char c; - char *s; - long int num; - - int longFlag; - int negFlag; - int width; - int prec; - int ladjust; - char padc; - - int length; - - for(;;) { - { - /* scan for the next '%' */ - char *fmtStart = fmt; - while ( (*fmt != '\0') && (*fmt != '%')) { - fmt ++; - } - - /* flush the string found so far */ - OUTPUT(arg, fmtStart, fmt-fmtStart); - - /* are we hitting the end? */ - if (*fmt == '\0') break; - } - - /* we found a '%' */ - fmt ++; - - /* check for long */ - if (*fmt == 'l') { - longFlag = 1; - fmt ++; - } else { - longFlag = 0; - } - - /* check for other prefixes */ - width = 0; - prec = -1; - ladjust = 0; - padc = ' '; - - if (*fmt == '-') { - ladjust = 1; - fmt ++; - } - - if (*fmt == '0') { - padc = '0'; - fmt++; - } - - if (IsDigit(*fmt)) { - while (IsDigit(*fmt)) { - width = 10 * width + Ctod(*fmt++); - } - } - - if (*fmt == '.') { - fmt ++; - if (IsDigit(*fmt)) { - prec = 0; - while (IsDigit(*fmt)) { - prec = prec*10 + Ctod(*fmt++); - } - } - } - - - /* check format flag */ - negFlag = 0; - switch (*fmt) { - case 'b': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'd': - case 'D': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - if (num < 0) { - num = - num; - negFlag = 1; - } - length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'o': - case 'O': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'u': - case 'U': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'x': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'X': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); - OUTPUT(arg, buf, length); - break; - - case 'c': - c = (char)va_arg(ap, int); - length = PrintChar(buf, c, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case 's': - s = (char*)va_arg(ap, char *); - length = PrintString(buf, s, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case '\0': - fmt --; - break; - - default: - /* output this char as it is */ - OUTPUT(arg, fmt, 1); - } /* switch (*fmt) */ - - fmt ++; - } /* for(;;) */ - - /* special termination call */ - OUTPUT(arg, "\0", 1); -} - - -/* --------------- local help functions --------------------- */ -int -PrintChar(char * buf, char c, int length, int ladjust) -{ - int i; - - if (length < 1) length = 1; - if (ladjust) { - *buf = c; - for (i=1; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-1; i++) buf[i] = ' '; - buf[length - 1] = c; - } - return length; -} - -int -PrintString(char * buf, char* s, int length, int ladjust) -{ - int i; - int len=0; - char* s1 = s; - while (*s1++) len++; - if (length < len) length = len; - - if (ladjust) { - for (i=0; i< len; i++) buf[i] = s[i]; - for (i=len; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-len; i++) buf[i] = ' '; - for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; - } - return length; -} - -int -PrintNum(char * buf, unsigned long u, int base, int negFlag, - int length, int ladjust, char padc, int upcase) -{ - /* algorithm : - * 1. prints the number from left to right in reverse form. - * 2. fill the remaining spaces with padc if length is longer than - * the actual length - * TRICKY : if left adjusted, no "0" padding. - * if negtive, insert "0" padding between "0" and number. - * 3. if (!ladjust) we reverse the whole string including paddings - * 4. otherwise we only reverse the actual string representing the num. - */ - - int actualLength =0; - char *p = buf; - int i; - - do { - int tmp = u %base; - if (tmp <= 9) { - *p++ = '0' + tmp; - } else if (upcase) { - *p++ = 'A' + tmp - 10; - } else { - *p++ = 'a' + tmp - 10; - } - u /= base; - } while (u != 0); - - if (negFlag) { - *p++ = '-'; - } - - /* figure out actual length and adjust the maximum length */ - actualLength = p - buf; - if (length < actualLength) length = actualLength; - - /* add padding */ - if (ladjust) { - padc = ' '; - } - if (negFlag && !ladjust && (padc == '0')) { - for (i = actualLength-1; i< length-1; i++) buf[i] = padc; - buf[length -1] = '-'; - } else { - for (i = actualLength; i< length; i++) buf[i] = padc; - } - - - /* prepare to reverse the string */ - { - int begin = 0; - int end; - if (ladjust) { - end = actualLength - 1; - } else { - end = length -1; - } - - while (end > begin) { - char tmp = buf[begin]; - buf[begin] = buf[end]; - buf[end] = tmp; - begin ++; - end --; - } - } - - /* adjust the string pointer */ - return length; -} diff --git a/target/image/generic/lzma-loader/src/print.h b/target/image/generic/lzma-loader/src/print.h deleted file mode 100644 index b051463909..0000000000 --- a/target/image/generic/lzma-loader/src/print.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _print_h_ -#define _print_h_ - -#include <stdarg.h> - -/* this is the maximum width for a variable */ -#define LP_MAX_BUF 80 - -/* -*- - * output function takes an void pointer which is passed in as the - * second argument in lp_Print(). This black-box argument gives output - * function a way to track state. - * - * The second argument in output function is a pointer to char buffer. - * The third argument specifies the number of chars to outputed. - * - * output function cannot assume the buffer is null-terminated after - * l number of chars. - */ -void lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap); - -#endif diff --git a/target/image/generic/lzma-loader/src/printf.c b/target/image/generic/lzma-loader/src/printf.c deleted file mode 100644 index 49bd50d7c7..0000000000 --- a/target/image/generic/lzma-loader/src/printf.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "printf.h" -#include "print.h" -#include "uart16550.h" - -static void myoutput(void *arg, char *s, int l) -{ - int i; - - // special termination call - if ((l==1) && (s[0] == '\0')) return; - - for (i=0; i< l; i++) { - Uart16550Put(s[i]); - if (s[i] == '\n') Uart16550Put('\r'); - } -} - -void printf(char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - lp_Print(myoutput, 0, fmt, ap); - va_end(ap); -} diff --git a/target/image/generic/lzma-loader/src/printf.h b/target/image/generic/lzma-loader/src/printf.h deleted file mode 100644 index 9b1c1df232..0000000000 --- a/target/image/generic/lzma-loader/src/printf.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _printf_h_ -#define _printf_h_ - -#include <stdarg.h> -void printf(char *fmt, ...); - -#endif /* _printf_h_ */ diff --git a/target/image/generic/lzma-loader/src/start.S b/target/image/generic/lzma-loader/src/start.S deleted file mode 100644 index 9a85c4c357..0000000000 --- a/target/image/generic/lzma-loader/src/start.S +++ /dev/null @@ -1,160 +0,0 @@ -#include <asm/asm.h> -#include <asm/regdef.h> - -#define KSEG0 0x80000000 - -#define C0_CONFIG $16 -#define C0_TAGLO $28 -#define C0_TAGHI $29 - -#define CONF1_DA_SHIFT 7 /* D$ associativity */ -#define CONF1_DA_MASK 0x00000380 -#define CONF1_DA_BASE 1 -#define CONF1_DL_SHIFT 10 /* D$ line size */ -#define CONF1_DL_MASK 0x00001c00 -#define CONF1_DL_BASE 2 -#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -#define CONF1_DS_MASK 0x0000e000 -#define CONF1_DS_BASE 64 -#define CONF1_IA_SHIFT 16 /* I$ associativity */ -#define CONF1_IA_MASK 0x00070000 -#define CONF1_IA_BASE 1 -#define CONF1_IL_SHIFT 19 /* I$ line size */ -#define CONF1_IL_MASK 0x00380000 -#define CONF1_IL_BASE 2 -#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -#define CONF1_IS_MASK 0x01c00000 -#define CONF1_IS_BASE 64 - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -LEAF(_start) - - .set mips32 - .set noreorder - - /* save argument registers */ - move t4, a0 - move t5, a1 - move t6, a2 - move t7, a3 - - /* set up stack */ - li sp, 0xa0000000 + RAMSIZE - 16 - -#ifdef IMAGE_COPY - /* Copy decompressor code to the right place */ - li t2, LOADADDR - add a0, t2, 0 - la a1, code_start - la a2, code_stop -$L1: - lw t0, 0(a1) - sw t0, 0(a0) - add a1, 4 - add a0, 4 - blt a1, a2, $L1 - nop -#endif - - /* At this point we need to invalidate dcache and */ - /* icache before jumping to new code */ - -1: /* Get cache sizes */ - mfc0 s0,C0_CONFIG,1 - - li s1,CONF1_DL_MASK - and s1,s0 - beq s1,zero,nodc - nop - - srl s1,CONF1_DL_SHIFT - li t0,CONF1_DL_BASE - sll s1,t0,s1 /* s1 has D$ cache line size */ - - li s2,CONF1_DA_MASK - and s2,s0 - srl s2,CONF1_DA_SHIFT - addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ - - li t0,CONF1_DS_MASK - and t0,s0 - srl t0,CONF1_DS_SHIFT - li s3,CONF1_DS_BASE - sll s3,s3,t0 /* s3 has D$ sets per way */ - - multu s2,s3 /* sets/way * associativity */ - mflo t0 /* total cache lines */ - - multu s1,t0 /* D$ linesize * lines */ - mflo s2 /* s2 is now D$ size in bytes */ - - /* Initilize the D$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s2 /* + size of cache == end */ - -1: cache Index_Writeback_Inv_D,0(t0) - bne t0,t1,1b - addu t0,s1 - -nodc: - /* Now we get to do it all again for the I$ */ - - move s3,zero /* just in case there is no icache */ - move s4,zero - - li t0,CONF1_IL_MASK - and t0,s0 - beq t0,zero,noic - nop - - srl t0,CONF1_IL_SHIFT - li s3,CONF1_IL_BASE - sll s3,t0 /* s3 has I$ cache line size */ - - li t0,CONF1_IA_MASK - and t0,s0 - srl t0,CONF1_IA_SHIFT - addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ - - li t0,CONF1_IS_MASK - and t0,s0 - srl t0,CONF1_IS_SHIFT - li s5,CONF1_IS_BASE - sll s5,t0 /* s5 has I$ sets per way */ - - multu s4,s5 /* sets/way * associativity */ - mflo t0 /* s4 is now total cache lines */ - - multu s3,t0 /* I$ linesize * lines */ - mflo s4 /* s4 is cache size in bytes */ - - /* Initilize the I$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s4 /* + size of cache == end */ - -1: cache Index_Invalidate_I,0(t0) - bne t0,t1,1b - addu t0,s3 -noic: - /* jump to main */ - move a0,s3 /* icache line size */ - move a1,s4 /* icache size */ - move a2,s1 /* dcache line size */ -#ifdef IMAGE_COPY - jal t2 -#else - jal entry -#endif - move a3,s2 /* dcache size */ - - .set reorder -END(_start) - diff --git a/target/image/generic/lzma-loader/src/uart16550.c b/target/image/generic/lzma-loader/src/uart16550.c deleted file mode 100644 index 7df5727600..0000000000 --- a/target/image/generic/lzma-loader/src/uart16550.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - - -#include "uart16550.h" - -/* === CONFIG === */ - -#define BASE 0xb8058000 -#define MAX_BAUD 1152000 -#define REG_OFFSET 4 - -/* === END OF CONFIG === */ - -/* register offset */ -#define OFS_RCV_BUFFER (0*REG_OFFSET) -#define OFS_TRANS_HOLD (0*REG_OFFSET) -#define OFS_SEND_BUFFER (0*REG_OFFSET) -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint32*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint32*)(BASE + y))) = z) - -#define DEBUG_LED (*(unsigned short*)0xb7ffffc0) -#define OutputLED(x) (DEBUG_LED = x) - -void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up buad rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -uint8 Uart16550GetPoll() -{ - while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -void Uart16550Put(uint8 byte) -{ - while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); -} - diff --git a/target/image/generic/lzma-loader/src/uart16550.h b/target/image/generic/lzma-loader/src/uart16550.h deleted file mode 100644 index b3fd6fdd75..0000000000 --- a/target/image/generic/lzma-loader/src/uart16550.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _uart16550_h_ -#define _uart16550_h_ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop); - -/* blocking call */ -uint8 Uart16550GetPoll(); - -void Uart16550Put(uint8 byte); - -#endif diff --git a/target/image/ixp4xx/Makefile b/target/image/ixp4xx/Makefile deleted file mode 100644 index 23a0644338..0000000000 --- a/target/image/ixp4xx/Makefile +++ /dev/null @@ -1,32 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Build/Clean -endef - -define Image/Prepare -endef - -define Image/BuildKernel - cp $(LINUX_DIR)/arch/arm/boot/zImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-zImage -endef - -define Image/Build - $(call Image/Build/$(1),$(1)) -endef - -define Image/Build/jffs2-64k - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=65536 conv=sync -endef - -define Image/Build/jffs2-128k - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=131072 conv=sync -endef - -$(eval $(call BuildImage)) diff --git a/target/image/magicbox/Makefile b/target/image/magicbox/Makefile deleted file mode 100644 index 10f71df2a9..0000000000 --- a/target/image/magicbox/Makefile +++ /dev/null @@ -1,38 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Build/Clean -endef - -define Image/Prepare -endef - -define Image/BuildKernel - cp $(LINUX_DIR)/arch/ppc/boot/images/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage -endef - -define Image/Build - $(call Image/Build/$(1),$(1)) -endef - -define Image/Build/jffs2-64k - ( \ - dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=65536 conv=sync; \ - dd if=$(KDIR)/root.$(1) bs=65536 conv=sync; \ - ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img -endef - -#define Image/Build/jffs2-128k -# ( \ -# dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=131072 conv=sync; \ -# dd if=$(KDIR)/root.$(1) bs=131072 conv=sync; \ -# ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img -#endef - -$(eval $(call BuildImage)) diff --git a/target/image/rb532/Makefile b/target/image/rb532/Makefile deleted file mode 100644 index 7213cf8b8a..0000000000 --- a/target/image/rb532/Makefile +++ /dev/null @@ -1,76 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk -include $(INCLUDE_DIR)/kernel.mk - -LOADADDR = 0x81000000 # RAM start + 16M -KERNEL_ENTRY = 0x80101000 -RAMSIZE = 0x00100000 # 1MB -IMAGE_COPY = 1 - -LOADER_MAKEOPTS= \ - KDIR=$(KDIR) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) \ - RAMSIZE=$(RAMSIZE) \ - IMAGE_COPY=$(IMAGE_COPY) - -define Build/Clean - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean -endef - -CMDLINE_SIZE=512 -CMDLINE_OFFSET=4112 - -define Image/Prepare - echo 'root=/dev/cfa2 ' | \ - dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \ - dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1 - $(KERNEL_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUX_DIR)/vmlinux $(LINUX_KERNEL) -endef - -define Image/BuildKernel - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean compile - $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux -endef - -PARTITION1=\x80\x01\x01\x00\x27\x01\x20\x7b\x20\x00\x00\x00\xe0\x1e\x00\x00# 4 MB (kernel part) -PARTITION2=\x00\x00\x01\x7c\x83\x01\xa0\x64\x00\x1f\x00\x00\x40\x7a\x00\x00# 16 MB (rootfs part) - -define Image/cmdline/jffs2-64k -block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 -endef - -define Image/cmdline/jffs2-128k -block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 -endef - -define Image/cmdline/ext2 -root=/dev/cfa2 rootfstype=ext2 -endef - -define Image/Build - echo '$(strip $(call Image/cmdline/$(1))) ' | \ - dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \ - dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1 - ( \ - echo -ne OWRT | dd bs=$$$$((0x1be)) conv=sync; \ - ( \ - echo -ne '$(strip $(PARTITION1))'; \ - echo -ne '$(strip $(PARTITION2))'; \ - ) | dd bs=$$$$((0x40)) conv=sync; \ - echo -ne '\x55\xaa'; \ - dd if=/dev/zero bs=$$$$((0x3e00)) conv=sync count=1; \ - dd if=$(LINUX_DIR)/vmlinux bs=$$$$((0x3dc000)) conv=sync; \ - cat $(KDIR)/root.$(1); \ - echo -ne '\xde\xad\xc0\xde'; \ - ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin -endef - -$(eval $(call BuildImage)) diff --git a/target/image/rdc/Makefile b/target/image/rdc/Makefile deleted file mode 100644 index 06082404ee..0000000000 --- a/target/image/rdc/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Build/Clean -endef - -define Image/Prepare -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma -endef - -define Image/Build/ar525w -endef - -$(call Image/Build/ar525w,$(1),$(patsubst jffs2-%,jffs2,$(1))) - -$(eval $(call BuildImage)) diff --git a/target/image/uml/Makefile b/target/image/uml/Makefile deleted file mode 100755 index 6af4b8b816..0000000000 --- a/target/image/uml/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Image/Build - cp $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img - cp $(LINUX_DIR)/linux $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux -endef - -$(eval $(call BuildImage)) diff --git a/target/image/x86/Config.in b/target/image/x86/Config.in deleted file mode 100644 index 511a8d9d09..0000000000 --- a/target/image/x86/Config.in +++ /dev/null @@ -1,30 +0,0 @@ -config X86_GRUB_IMAGES - bool "Build GRUB images (Linux x86 or x86_64 host only)" - depends LINUX_2_6_X86 - depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_JFFS2 - default y - -config X86_GRUB_BAUDRATE - int "Serial port baud rate" - depends X86_GRUB_IMAGES - default 38400 - -config X86_GRUB_KERNELPART - int "Kernel partition size (in MB)" - depends X86_GRUB_IMAGES - default 4 - -config X86_GRUB_ROOTPART - string - prompt "Root partition on target device" if X86_GRUB_IMAGES - default "/dev/hda2" - help - The root partition on the final device. If you don't know, - you probably want the default (/dev/hda2). - -config X86_GRUB_BOOTOPTS - string - prompt "Extra kernel boot options" if X86_GRUB_IMAGES - default "" - help - If you don't know, just leave it blank. diff --git a/target/image/x86/Makefile b/target/image/x86/Makefile deleted file mode 100644 index 7aa03b2d27..0000000000 --- a/target/image/x86/Makefile +++ /dev/null @@ -1,62 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -export PATH=$(TARGET_PATH):/sbin -ROOTPART=$(strip $(subst ",, $(CONFIG_X86_GRUB_ROOTPART))) -#")) # fix vim's broken syntax highlighting - - -ifeq ($(CONFIG_X86_GRUB_IMAGES),y) - define Build/Compile - $(MAKE) -C grub compile - endef - - define Build/Clean - $(MAKE) -C grub clean - endef - - define Image/cmdline/jffs2-64k - block2mtd.block2mtd=$(ROOTPART),65536 root=/dev/mtdblock0 rootfstype=jffs2 - endef - - define Image/cmdline/jffs2-128k - block2mtd.block2mtd=$(ROOTPART),131072 root=/dev/mtdblock0 rootfstype=jffs2 - endef - - define Image/cmdline/ext2 - root=$(ROOTPART) rootfstype=ext2 $(CONFIG_X86_GRUB_BOOTOPTS) - endef - - define Image/Build/grub - mkdir -p $(KDIR)/root.grub/boot/grub - $(CP) \ - $(STAGING_DIR)/usr/lib/grub/i386-pc/stage1 \ - $(STAGING_DIR)/usr/lib/grub/i386-pc/stage2 \ - $(STAGING_DIR)/usr/lib/grub/i386-pc/e2fs_stage1_5 \ - $(KDIR)/root.grub/boot/grub/ - $(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/root.grub/boot/vmlinuz - sed \ - -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)))#g' \ - -e 's#@BAUDRATE@#$(CONFIG_X86_GRUB_BAUDRATE)#g' \ - ./grub/menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst - PATH="$(STAGING_DIR)/usr/sbin:$(STAGING_DIR)/bin:$(PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1) - endef -endif - -define Image/Build - $(call Image/Build/grub,$(1)) - cp $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).fs - cp $(LINUX_DIR)/arch/i386/boot/bzImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz -endef - -$(eval $(call BuildImage)) - -$(eval $(call RequireCommand,fdisk, \ - Please install fdisk \ -)) diff --git a/target/image/x86/gen_image.sh b/target/image/x86/gen_image.sh deleted file mode 100755 index 21deeee6ac..0000000000 --- a/target/image/x86/gen_image.sh +++ /dev/null @@ -1,60 +0,0 @@ -#!/usr/bin/env bash -# Copyright (C) 2006 OpenWrt.org - -[ $# == 5 ] || { - echo "SYNTAX: $0 <file> <kernel size> <kernel directory> <rootfs size> <rootfs image>" - exit 1 -} - -file="$1" -part1s="$2" -part1d="$3" -part2s="$4" -part2f="$5" - -head=16 -sect=63 -cyl=$(( ($part1s + $part2s) * 1024 * 1024 / ($head * $sect * 512))) - -dd if=/dev/zero of="$file" bs=1M count=$(($part1s + $part2s)) 2>/dev/null || exit -fdisk -u -C $cyl -H $head -S $sect "$file" > /dev/null 2>/dev/null <<EOF -n -p -1 - -+$(($part1s * 1024))K -n -p -2 - - -w -q -EOF - -block() { - echo -e 'p\nq' | fdisk -u -C $cyl -H $head -S $sect "$file" | awk -v file="$file$1" -v n="$(($2 + 2))" ' -$1 == file { - print $n * 512 -}' -} - -start="$(block 1 0)" -end="$(block 1 1)" -blocks="$(( ($end - $start) / 1024 ))" - -genext2fs -d "$part1d" -b "$blocks" "$file.kernel" -dd if="$file.kernel" of="$file" bs=512 seek="$(($start / 512))" conv=notrunc -rm -f "$file.kernel" - -start="$(block 2 0)" -dd if="$part2f" of="$file" bs=512 seek="$(($start / 512))" conv=notrunc - -which chpax >/dev/null && chpax -zp $(which grub) -grub --device-map=/dev/null <<EOF -device (hd0) $file -geometry (hd0) $cyl $head $sect -root (hd0,0) -setup (hd0) -EOF - diff --git a/target/image/x86/grub/Makefile b/target/image/x86/grub/Makefile deleted file mode 100644 index e30443e18c..0000000000 --- a/target/image/x86/grub/Makefile +++ /dev/null @@ -1,79 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id: Makefile 4855 2006-09-24 20:49:31Z nico $ - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=grub -PKG_VERSION:=0.97 -PKG_RELEASE:=1 - -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz -PKG_SOURCE_URL:=ftp://alpha.gnu.org/gnu/grub -PKG_MD5SUM:=cd3f3eb54446be6003156158d51f4884 -PKG_CAT:=zcat - -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/grub-$(PKG_VERSION) - -include $(INCLUDE_DIR)/package.mk - -ifeq ($(HOST_ARCH),x86_64) - define Build/Configure - (cd $(PKG_BUILD_DIR); \ - LDFLAGS="-static" \ - ./configure \ - --target=$(GNU_TARGET_NAME) \ - --host=$(GNU_TARGET_NAME) \ - --build=$(GNU_HOST_NAME) \ - --program-prefix="" \ - --program-suffix="" \ - --prefix=/usr \ - --exec-prefix=/usr \ - --bindir=/usr/bin \ - --sbindir=/usr/sbin \ - --libexecdir=/usr/lib \ - --sysconfdir=/etc \ - --datadir=/usr/share \ - --localstatedir=/var \ - --mandir=/usr/man \ - --infodir=/usr/info \ - $(DISABLE_NLS) \ - ) - endef -else - define Build/Configure - (cd $(PKG_BUILD_DIR); \ - LDFLAGS="-static" \ - ./configure \ - --program-prefix="" \ - --program-suffix="" \ - --prefix=/usr \ - --exec-prefix=/usr \ - --bindir=/usr/bin \ - --sbindir=/usr/sbin \ - --libexecdir=/usr/lib \ - --sysconfdir=/etc \ - --datadir=/usr/share \ - --localstatedir=/var \ - --mandir=/usr/man \ - --infodir=/usr/info \ - ) - endef -endif - -define Build/Compile - $(MAKE) -C $(PKG_BUILD_DIR) -endef - -define Build/InstallDev - $(MAKE) -C $(PKG_BUILD_DIR) \ - DESTDIR="$(STAGING_DIR)" \ - install -endef - -$(eval $(call Build/DefaultTargets)) diff --git a/target/image/x86/grub/menu.lst b/target/image/x86/grub/menu.lst deleted file mode 100644 index 590a7d5e3a..0000000000 --- a/target/image/x86/grub/menu.lst +++ /dev/null @@ -1,11 +0,0 @@ -serial --unit=0 --speed=@BAUDRATE@ --word=8 --parity=no --stop=1 -terminal --timeout=10 serial - -default 0 -timeout 5 - -title OpenWrt -root (hd0,0) -kernel /boot/vmlinuz @CMDLINE@ noinitrd console=ttyS0,@BAUDRATE@n8 reboot=bios -boot - |