diff options
Diffstat (limited to 'package/libertas/src/host.h')
| -rw-r--r-- | package/libertas/src/host.h | 292 |
1 files changed, 0 insertions, 292 deletions
diff --git a/package/libertas/src/host.h b/package/libertas/src/host.h deleted file mode 100644 index 3915c3144f..0000000000 --- a/package/libertas/src/host.h +++ /dev/null @@ -1,292 +0,0 @@ -/** - * This file contains definitions of WLAN commands. - */ - -#ifndef _LBS_HOST_H_ -#define _LBS_HOST_H_ - -/** PUBLIC DEFINITIONS */ -#define DEFAULT_AD_HOC_CHANNEL 6 -#define DEFAULT_AD_HOC_CHANNEL_A 36 - -/** IEEE 802.11 oids */ -#define OID_802_11_SSID 0x00008002 -#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008 -#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009 -#define OID_802_11_RTS_THRESHOLD 0x0000800A -#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D -#define OID_802_11_SUPPORTED_RATES 0x0000800E -#define OID_802_11_STATISTICS 0x00008012 -#define OID_802_11_TX_RETRYCOUNT 0x0000801D -#define OID_802_11D_ENABLE 0x00008020 - -#define CMD_OPTION_WAITFORRSP 0x0002 - -/** Host command IDs */ - -/* Return command are almost always the same as the host command, but with - * bit 15 set high. There are a few exceptions, though... - */ -#define CMD_RET(cmd) (0x8000 | cmd) - -/* Return command convention exceptions: */ -#define CMD_RET_802_11_ASSOCIATE 0x8012 - -/* Command codes */ -#define CMD_GET_HW_SPEC 0x0003 -#define CMD_EEPROM_UPDATE 0x0004 -#define CMD_802_11_RESET 0x0005 -#define CMD_802_11_SCAN 0x0006 -#define CMD_802_11_GET_LOG 0x000b -#define CMD_MAC_MULTICAST_ADR 0x0010 -#define CMD_802_11_AUTHENTICATE 0x0011 -#define CMD_802_11_EEPROM_ACCESS 0x0059 -#define CMD_802_11_ASSOCIATE 0x0050 -#define CMD_802_11_SET_WEP 0x0013 -#define CMD_802_11_GET_STAT 0x0014 -#define CMD_802_3_GET_STAT 0x0015 -#define CMD_802_11_SNMP_MIB 0x0016 -#define CMD_MAC_REG_MAP 0x0017 -#define CMD_BBP_REG_MAP 0x0018 -#define CMD_MAC_REG_ACCESS 0x0019 -#define CMD_BBP_REG_ACCESS 0x001a -#define CMD_RF_REG_ACCESS 0x001b -#define CMD_802_11_RADIO_CONTROL 0x001c -#define CMD_802_11_RF_CHANNEL 0x001d -#define CMD_802_11_RF_TX_POWER 0x001e -#define CMD_802_11_RSSI 0x001f -#define CMD_802_11_RF_ANTENNA 0x0020 -#define CMD_802_11_PS_MODE 0x0021 -#define CMD_802_11_DATA_RATE 0x0022 -#define CMD_RF_REG_MAP 0x0023 -#define CMD_802_11_DEAUTHENTICATE 0x0024 -#define CMD_802_11_REASSOCIATE 0x0025 -#define CMD_802_11_DISASSOCIATE 0x0026 -#define CMD_MAC_CONTROL 0x0028 -#define CMD_802_11_AD_HOC_START 0x002b -#define CMD_802_11_AD_HOC_JOIN 0x002c -#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e -#define CMD_802_11_ENABLE_RSN 0x002f -#define CMD_802_11_SET_AFC 0x003c -#define CMD_802_11_GET_AFC 0x003d -#define CMD_802_11_AD_HOC_STOP 0x0040 -#define CMD_802_11_HOST_SLEEP_CFG 0x0043 -#define CMD_802_11_WAKEUP_CONFIRM 0x0044 -#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045 -#define CMD_802_11_BEACON_STOP 0x0049 -#define CMD_802_11_MAC_ADDRESS 0x004d -#define CMD_802_11_LED_GPIO_CTRL 0x004e -#define CMD_802_11_EEPROM_ACCESS 0x0059 -#define CMD_802_11_BAND_CONFIG 0x0058 -#define CMD_802_11D_DOMAIN_INFO 0x005b -#define CMD_802_11_KEY_MATERIAL 0x005e -#define CMD_802_11_SLEEP_PARAMS 0x0066 -#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 -#define CMD_802_11_SLEEP_PERIOD 0x0068 -#define CMD_802_11_TPC_CFG 0x0072 -#define CMD_802_11_FW_WAKE_METHOD 0x0074 -#define CMD_802_11_SUBSCRIBE_EVENT 0x0075 -#define CMD_802_11_RATE_ADAPT_RATESET 0x0076 -#define CMD_802_11_TX_RATE_QUERY 0x007f -#define CMD_GET_TSF 0x0080 -#define CMD_BT_ACCESS 0x0087 -#define CMD_FWT_ACCESS 0x0095 -#define CMD_802_11_MONITOR_MODE 0x0098 -#define CMD_MESH_ACCESS 0x009b -#define CMD_MESH_CONFIG 0x00a3 -#define CMD_SET_BOOT2_VER 0x00a5 -#define CMD_802_11_BEACON_CTRL 0x00b0 - -/* For the IEEE Power Save */ -#define CMD_SUBCMD_ENTER_PS 0x0030 -#define CMD_SUBCMD_EXIT_PS 0x0031 -#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034 -#define CMD_SUBCMD_FULL_POWERDOWN 0x0035 -#define CMD_SUBCMD_FULL_POWERUP 0x0036 - -#define CMD_ENABLE_RSN 0x0001 -#define CMD_DISABLE_RSN 0x0000 - -#define CMD_ACT_GET 0x0000 -#define CMD_ACT_SET 0x0001 -#define CMD_ACT_GET_AES 0x0002 -#define CMD_ACT_SET_AES 0x0003 -#define CMD_ACT_REMOVE_AES 0x0004 - -/* Define action or option for CMD_802_11_SET_WEP */ -#define CMD_ACT_ADD 0x0002 -#define CMD_ACT_REMOVE 0x0004 -#define CMD_ACT_USE_DEFAULT 0x0008 - -#define CMD_TYPE_WEP_40_BIT 0x01 -#define CMD_TYPE_WEP_104_BIT 0x02 - -#define CMD_NUM_OF_WEP_KEYS 4 - -#define CMD_WEP_KEY_INDEX_MASK 0x3fff - -/* Define action or option for CMD_802_11_RESET */ -#define CMD_ACT_HALT 0x0003 - -/* Define action or option for CMD_802_11_SCAN */ -#define CMD_BSS_TYPE_BSS 0x0001 -#define CMD_BSS_TYPE_IBSS 0x0002 -#define CMD_BSS_TYPE_ANY 0x0003 - -/* Define action or option for CMD_802_11_SCAN */ -#define CMD_SCAN_TYPE_ACTIVE 0x0000 -#define CMD_SCAN_TYPE_PASSIVE 0x0001 - -#define CMD_SCAN_RADIO_TYPE_BG 0 - -#define CMD_SCAN_PROBE_DELAY_TIME 0 - -/* Define action or option for CMD_MAC_CONTROL */ -#define CMD_ACT_MAC_RX_ON 0x0001 -#define CMD_ACT_MAC_TX_ON 0x0002 -#define CMD_ACT_MAC_LOOPBACK_ON 0x0004 -#define CMD_ACT_MAC_WEP_ENABLE 0x0008 -#define CMD_ACT_MAC_INT_ENABLE 0x0010 -#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 -#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 -#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 -#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 -#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 - -/* Define action or option for CMD_802_11_RADIO_CONTROL */ -#define CMD_TYPE_AUTO_PREAMBLE 0x0001 -#define CMD_TYPE_SHORT_PREAMBLE 0x0002 -#define CMD_TYPE_LONG_PREAMBLE 0x0003 - -/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ -#define CMD_SUBSCRIBE_RSSI_LOW 0x0001 -#define CMD_SUBSCRIBE_SNR_LOW 0x0002 -#define CMD_SUBSCRIBE_FAILCOUNT 0x0004 -#define CMD_SUBSCRIBE_BCNMISS 0x0008 -#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 -#define CMD_SUBSCRIBE_SNR_HIGH 0x0020 - -#define TURN_ON_RF 0x01 -#define RADIO_ON 0x01 -#define RADIO_OFF 0x00 - -#define SET_AUTO_PREAMBLE 0x05 -#define SET_SHORT_PREAMBLE 0x03 -#define SET_LONG_PREAMBLE 0x01 - -/* Define action or option for CMD_802_11_RF_CHANNEL */ -#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 -#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 - -/* Define action or option for CMD_802_11_RF_TX_POWER */ -#define CMD_ACT_TX_POWER_OPT_GET 0x0000 -#define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007 -#define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004 -#define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000 - -#define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007 -#define CMD_ACT_TX_POWER_INDEX_MID 0x0004 -#define CMD_ACT_TX_POWER_INDEX_LOW 0x0000 - -/* Define action or option for CMD_802_11_DATA_RATE */ -#define CMD_ACT_SET_TX_AUTO 0x0000 -#define CMD_ACT_SET_TX_FIX_RATE 0x0001 -#define CMD_ACT_GET_TX_RATE 0x0002 - -#define CMD_ACT_SET_RX 0x0001 -#define CMD_ACT_SET_TX 0x0002 -#define CMD_ACT_SET_BOTH 0x0003 -#define CMD_ACT_GET_RX 0x0004 -#define CMD_ACT_GET_TX 0x0008 -#define CMD_ACT_GET_BOTH 0x000c - -/* Define action or option for CMD_802_11_PS_MODE */ -#define CMD_TYPE_CAM 0x0000 -#define CMD_TYPE_MAX_PSP 0x0001 -#define CMD_TYPE_FAST_PSP 0x0002 - -/* Options for CMD_802_11_FW_WAKE_METHOD */ -#define CMD_WAKE_METHOD_UNCHANGED 0x0000 -#define CMD_WAKE_METHOD_COMMAND_INT 0x0001 -#define CMD_WAKE_METHOD_GPIO 0x0002 - -/* Define action or option for CMD_BT_ACCESS */ -enum cmd_bt_access_opts { - /* The bt commands start at 5 instead of 1 because the old dft commands - * are mapped to 1-4. These old commands are no longer maintained and - * should not be called. - */ - CMD_ACT_BT_ACCESS_ADD = 5, - CMD_ACT_BT_ACCESS_DEL, - CMD_ACT_BT_ACCESS_LIST, - CMD_ACT_BT_ACCESS_RESET, - CMD_ACT_BT_ACCESS_SET_INVERT, - CMD_ACT_BT_ACCESS_GET_INVERT -}; - -/* Define action or option for CMD_FWT_ACCESS */ -enum cmd_fwt_access_opts { - CMD_ACT_FWT_ACCESS_ADD = 1, - CMD_ACT_FWT_ACCESS_DEL, - CMD_ACT_FWT_ACCESS_LOOKUP, - CMD_ACT_FWT_ACCESS_LIST, - CMD_ACT_FWT_ACCESS_LIST_ROUTE, - CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR, - CMD_ACT_FWT_ACCESS_RESET, - CMD_ACT_FWT_ACCESS_CLEANUP, - CMD_ACT_FWT_ACCESS_TIME, -}; - -/* Define action or option for CMD_MESH_ACCESS */ -enum cmd_mesh_access_opts { - CMD_ACT_MESH_GET_TTL = 1, - CMD_ACT_MESH_SET_TTL, - CMD_ACT_MESH_GET_STATS, - CMD_ACT_MESH_GET_ANYCAST, - CMD_ACT_MESH_SET_ANYCAST, - CMD_ACT_MESH_SET_LINK_COSTS, - CMD_ACT_MESH_GET_LINK_COSTS, - CMD_ACT_MESH_SET_BCAST_RATE, - CMD_ACT_MESH_GET_BCAST_RATE, - CMD_ACT_MESH_SET_RREQ_DELAY, - CMD_ACT_MESH_GET_RREQ_DELAY, - CMD_ACT_MESH_SET_ROUTE_EXP, - CMD_ACT_MESH_GET_ROUTE_EXP, - CMD_ACT_MESH_SET_AUTOSTART_ENABLED, - CMD_ACT_MESH_GET_AUTOSTART_ENABLED, -}; - -/** Card Event definition */ -#define MACREG_INT_CODE_TX_PPA_FREE 0 -#define MACREG_INT_CODE_TX_DMA_DONE 1 -#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2 -#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3 -#define MACREG_INT_CODE_LINK_SENSED 4 -#define MACREG_INT_CODE_CMD_FINISHED 5 -#define MACREG_INT_CODE_MIB_CHANGED 6 -#define MACREG_INT_CODE_INIT_DONE 7 -#define MACREG_INT_CODE_DEAUTHENTICATED 8 -#define MACREG_INT_CODE_DISASSOCIATED 9 -#define MACREG_INT_CODE_PS_AWAKE 10 -#define MACREG_INT_CODE_PS_SLEEP 11 -#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13 -#define MACREG_INT_CODE_MIC_ERR_UNICAST 14 -#define MACREG_INT_CODE_WM_AWAKE 15 -#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16 -#define MACREG_INT_CODE_ADHOC_BCN_LOST 17 -#define MACREG_INT_CODE_HOST_AWAKE 18 -#define MACREG_INT_CODE_STOP_TX 19 -#define MACREG_INT_CODE_START_TX 20 -#define MACREG_INT_CODE_CHANNEL_SWITCH 21 -#define MACREG_INT_CODE_MEASUREMENT_RDY 22 -#define MACREG_INT_CODE_WMM_CHANGE 23 -#define MACREG_INT_CODE_BG_SCAN_REPORT 24 -#define MACREG_INT_CODE_RSSI_LOW 25 -#define MACREG_INT_CODE_SNR_LOW 26 -#define MACREG_INT_CODE_MAX_FAIL 27 -#define MACREG_INT_CODE_RSSI_HIGH 28 -#define MACREG_INT_CODE_SNR_HIGH 29 -#define MACREG_INT_CODE_MESH_AUTO_STARTED 35 -#define MACREG_INT_CODE_FIRMWARE_READY 48 - -#endif |