diff options
| -rw-r--r-- | package/wondershaper/patches/wondershaper-OpenWrt.patch | 73 |
1 files changed, 5 insertions, 68 deletions
diff --git a/package/wondershaper/patches/wondershaper-OpenWrt.patch b/package/wondershaper/patches/wondershaper-OpenWrt.patch index a748a4b551..43d7fb115c 100644 --- a/package/wondershaper/patches/wondershaper-OpenWrt.patch +++ b/package/wondershaper/patches/wondershaper-OpenWrt.patch @@ -1,67 +1,3 @@ -diff -Nur wondershaper-1.1a/wshaper wondershaper-1.1a_openwrt/wshaper ---- wondershaper-1.1a/wshaper 2002-04-16 16:26:35.000000000 +0200 -+++ wondershaper-1.1a_openwrt/wshaper 2005-09-09 00:46:22.095406568 +0200 -@@ -1,33 +1,7 @@ --#!/bin/bash -- -+#!/bin/sh - # Wonder Shaper --# please read the README before filling out these values --# --# Set the following values to somewhat less than your actual download --# and uplink speed. In kilobits. Also set the device that is to be shaped. --DOWNLINK=800 --UPLINK=220 --DEV=eth0 -- --# low priority OUTGOING traffic - you can leave this blank if you want --# low priority source netmasks --NOPRIOHOSTSRC=80 -- --# low priority destination netmasks --NOPRIOHOSTDST= -- --# low priority source ports --NOPRIOPORTSRC= -- --# low priority destination ports --NOPRIOPORTDST= -- --# Now remove the following two lines :-) -- --echo Please read the documentation in 'README' first :-\) --exit -- --######################################################### -+. /etc/functions.sh -+. /etc/wshaper.conf - - if [ "$1" = "status" ] - then -@@ -46,6 +20,8 @@ - exit - fi - -+ -+ - ###### uplink - - # install root CBQ -@@ -67,12 +43,12 @@ - # bulk and default class 1:20 - gets slightly less traffic, - # and a lower priority: - --tc class add dev $DEV parent 1:1 classid 1:20 cbq rate $[9*$UPLINK/10]kbit \ -+tc class add dev $DEV parent 1:1 classid 1:20 cbq rate $((9*$UPLINK/10))kbit \ - allot 1600 prio 2 avpkt 1000 - - # 'traffic we hate' - --tc class add dev $DEV parent 1:1 classid 1:30 cbq rate $[8*$UPLINK/10]kbit \ -+tc class add dev $DEV parent 1:1 classid 1:30 cbq rate $((8*$UPLINK/10))kbit \ - allot 1600 prio 2 avpkt 1000 - - # all get Stochastic Fairness: diff -Nur wondershaper-1.1a/wshaper.conf wondershaper-1.1a_openwrt/wshaper.conf --- wondershaper-1.1a/wshaper.conf 1970-01-01 01:00:00.000000000 +0100 +++ wondershaper-1.1a_openwrt/wshaper.conf 2005-09-09 00:31:54.239340744 +0200 @@ -95,7 +31,7 @@ diff -Nur wondershaper-1.1a/wshaper.conf wondershaper-1.1a_openwrt/wshaper.conf + diff -Nur wondershaper-1.1a/wshaper.htb wondershaper-1.1a_openwrt/wshaper.htb --- wondershaper-1.1a/wshaper.htb 2002-04-16 16:26:51.000000000 +0200 -+++ wondershaper-1.1a_openwrt/wshaper.htb 2005-09-11 12:03:39.756950000 +0200 ++++ wondershaper-1.1a_openwrt/wshaper.htb 2005-09-11 13:24:56.143626544 +0200 @@ -1,44 +1,22 @@ -#!/bin/bash +#!/bin/ash @@ -149,7 +85,7 @@ diff -Nur wondershaper-1.1a/wshaper.htb wondershaper-1.1a_openwrt/wshaper.htb if [ "$1" = "stop" ] then -@@ -46,50 +24,65 @@ +@@ -46,50 +24,66 @@ fi @@ -158,6 +94,7 @@ diff -Nur wondershaper-1.1a/wshaper.htb wondershaper-1.1a_openwrt/wshaper.htb +if [ $DEV = "ppp0" ] && ! grep -q wshaper /etc/ppp/ip-up +then + echo "/usr/sbin/wshaper" >> /etc/ppp/ip-up ++ chmod 755 /etc/ppp/ip-up +fi + + @@ -226,7 +163,7 @@ diff -Nur wondershaper-1.1a/wshaper.htb wondershaper-1.1a_openwrt/wshaper.htb match ip protocol 6 0xff \ match u8 0x05 0x0f at 0 \ match u16 0x0000 0xffc0 at 2 \ -@@ -101,31 +94,31 @@ +@@ -101,31 +95,31 @@ # some traffic however suffers a worse fate for a in $NOPRIOPORTDST do @@ -263,7 +200,7 @@ diff -Nur wondershaper-1.1a/wshaper.htb wondershaper-1.1a_openwrt/wshaper.htb match ip dst 0.0.0.0/0 flowid 1:20 -@@ -136,12 +129,12 @@ +@@ -136,12 +130,12 @@ # # attach ingress policer: |