ramips: add Poray IP2202 support

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37640 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 121 insertions, 0 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 689fee7104..6ecb13352c 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -45,6 +45,9 @@ get_status_led() {
 	fonera20n)
 		status_led="fonera20n:green:power"
 		;;
+	ip2202)
+		status_led="ip2202:green:run"
+		;;
 	rt-n13u)
 		status_led="rt-n13u:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 2df7b0842b..ef13e364a5 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -173,6 +173,7 @@ ramips_setup_macs()
 	broadway | \
 	dir-620-d1 | \
 	f5d8235-v1 | \
+	ip2202 | \
 	mpr-a1 | \
 	mpr-a2 | \
 	mzk-w300nh2 | \
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 6712154dc4..a0d9b6123b 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -60,6 +60,7 @@ preinit_set_mac_address() {
 	carambola |\
 	dir-615-h1 |\
 	fonera20n |\
+	ip2202 |\
 	rt-n13u |\
 	hw550-3g |\
 	nbg-419n |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 6960c6d401..858a8092e7 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -148,6 +148,9 @@ ramips_board_detect() {
 	*"Planex MZK-W300NH2"*)
 		name="mzk-w300nh2"
 		;;
+	*"Poray IP2202")
+		name="ip2202"
+		;;
 	*"Poray M3")
 		name="m3"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index df3b32479d..e85beada39 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -44,6 +44,7 @@ platform_check_image() {
 	freestation5 | \
 	hw550-3g | \
 	hg255d | \
+	ip2202 | \
 	m3 | \
 	m4 | \
 	mofi3500-3gn | \
diff --git a/target/linux/ramips/dts/IP2202.dts b/target/linux/ramips/dts/IP2202.dts
new file mode 100644
index 0000000000..ea9f1702e6
--- /dev/null
+++ b/target/linux/ramips/dts/IP2202.dts
@@ -0,0 +1,97 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	compatible = "IP2202", "ralink,rt3052-soc";
+	model = "Poray IP2202";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+			ralink,gpiomux = "mdio";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x7b0000>;
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		run {
+			label = "ip2202:green:run";
+			gpios = <&gpio0 9 1>;
+		};
+		net {
+			label = "ip2202:amber:net";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+		ralink,led-polarity = <0>;
+	};
+
+	otg@101c0000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 4bfcced46f..88954f13aa 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -374,6 +374,8 @@ Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-
 
 Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5)
 
+Image/Build/Profile/IP2202=$(call BuildFirmware/Default8M/$(1),$(1),ip2202,IP2202)
+
 Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
 
 Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
@@ -516,6 +518,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/FREESTATION5,$(1))
 #	$(call Image/Build/Profile/HG255D,$(1))
 	$(call Image/Build/Profile/HW550-3G,$(1))
+	$(call Image/Build/Profile/IP2202,$(1))
 	$(call Image/Build/Profile/M3,$(1))
 	$(call Image/Build/Profile/M4,$(1))
 	$(call Image/Build/Profile/MOFI3500-3GN,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/poray.mk b/target/linux/ramips/rt305x/profiles/poray.mk
index 8c1ed6194f..ed017b7d84 100644
--- a/target/linux/ramips/rt305x/profiles/poray.mk
+++ b/target/linux/ramips/rt305x/profiles/poray.mk
@@ -5,6 +5,18 @@
 # See /LICENSE for more information.
 #
 
+define Profile/IP2202
+	NAME:=Poray IP2202
+	PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-rt305x-dwc_otg \
+	kmod-ledtrig-netdev kmod-ledtrig-timer restorefactory
+endef
+
+define Profile/IP2202/Description
+	Package set for Poray IP2202 board
+endef
+
+$(eval $(call Profile,IP2202))
+
 define Profile/M3
 	NAME:=Poray M3
 	PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer