[lantiq] adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73

32 files changed, 31530 insertions, 0 deletions

diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile
new file mode 100644
index 0000000000..5afe5662da
--- /dev/null
+++ b/target/linux/lantiq/Makefile
@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2007-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mips
+BOARD:=lantiq
+BOARDNAME:=Lantiq GPON/XWAY
+FEATURES:=squashfs jffs2 atm
+SUBTARGETS:=xway
+
+LINUX_VERSION:=2.6.35.9
+
+CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -funit-at-a-time
+
+include $(INCLUDE_DIR)/target.mk
+
+define Target/Description
+	Build firmware images for Lantiq SoC
+endef
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/lantiq/base-files/etc/config/network b/target/linux/lantiq/base-files/etc/config/network
new file mode 100644
index 0000000000..183e6bf34c
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/config/network
@@ -0,0 +1,26 @@
+config interface loopback
+	option ifname   lo
+	option proto    static
+	option ipaddr   127.0.0.1
+	option netmask  255.0.0.0
+
+config interface lan
+	option ifname   eth0
+	option type     bridge
+	option proto    static
+	option ipaddr   192.168.1.1
+	option netmask  255.255.255.0
+
+config atm-bridge
+	option unit		0
+	option encaps	llc
+	option vpi		1
+	option vci		32
+	option payload	bridged # some ISPs need this set to 'routed'
+
+config interface wan
+	option ifname	nas0
+	option proto	pppoe
+	option username ""
+	option password	""
+	option unit 0
diff --git a/target/linux/lantiq/base-files/etc/inittab b/target/linux/lantiq/base-files/etc/inittab
new file mode 100644
index 0000000000..7989a7f60e
--- /dev/null
+++ b/target/linux/lantiq/base-files/etc/inittab
@@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K stop
+ttyS0::askfirst:/bin/ash --login
+ttyS1::askfirst:/bin/ash --login
diff --git a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..247ba1a25c
--- /dev/null
+++ b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,25 @@
+PART_NAME=linux
+
+platform_check_image() {
+	[ "$ARGC" -gt 1 ] && return 1
+
+	case "$(get_magic_word "$1")" in
+		# .trx files
+		2705) return 0;;
+		*)
+			echo "Invalid image type"
+			return 1
+		;;
+	esac
+}
+
+# use default for platform_do_upgrade()
+
+disable_watchdog() {
+	killall watchdog
+	( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
+		echo 'Could not disable watchdog'
+		return 1
+	}
+}
+append sysupgrade_pre_upgrade disable_watchdog
diff --git a/target/linux/lantiq/config-default b/target/linux/lantiq/config-default
new file mode 100644
index 0000000000..95104710ac
--- /dev/null
+++ b/target/linux/lantiq/config-default
@@ -0,0 +1,163 @@
+# CONFIG_TC35815 is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_HAVE_IDE is not set
+# CONFIG_64BIT is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_AR7 is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_DM9000 is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_LOONGSON_UART_BASE is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_32BIT=y
+CONFIG_ADM6996_PHY=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BITREVERSE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEVPORT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_LANTIQ=y
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_LANTIQ=y
+CONFIG_NLS=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PHYLIB=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_SERIAL_LANTIQ=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_TREE_RCU=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_IFX_UDP_REDIRECT=y
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
new file mode 100644
index 0000000000..ee1f86dd45
--- /dev/null
+++ b/target/linux/lantiq/image/Makefile
@@ -0,0 +1,89 @@
+# 
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+JFFS2_BLOCKSIZE = 64k 128k 256k
+
+xway_cmdline=-console=ttyS1,115200 rootfstype=squashfs,jffs2
+falcon_cmdline=-console=ttyS0,115200 rootfstype=squashfs,jffs2
+
+define CompressLzma
+  $(STAGING_DIR_HOST)/bin/lzma e $(1) $(2)
+endef
+
+define PatchKernelLzma
+	cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+	$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
+	$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).lzma)
+endef
+
+define MkImageLzma
+	mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma \
+		-e 0x80002000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+		-d $(KDIR)/vmlinux-$(1).lzma $(KDIR)/uImage-$(1)
+endef
+
+define Image/Build/squashfs
+	cat $(KDIR)/uImage-$(2) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
+	$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image)
+endef
+
+define Image/Build/jffs2-64k
+	dd if=$(KDIR)/uImage-$(2) of=$(KDIR)/uImage-$(2)-$(1) bs=64k conv=sync
+	cat $(KDIR)/uImage-$(2)-$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
+endef
+
+define Image/Build/jffs2-128k
+	dd if=$(KDIR)/uImage-$(2) of=$(KDIR)/uImage-$(2)-$(1) bs=128k conv=sync
+	cat $(KDIR)/uImage-$(2)-$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
+endef
+
+define Image/Build/jffs2-256k
+	dd if=$(KDIR)/uImage-$(2) of=$(KDIR)/uImage-$(2)-$(1) bs=256k conv=sync
+	cat $(KDIR)/uImage-$(2)-$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
+endef
+
+define Image/BuildKernel/Template
+	$(call PatchKernelLzma,$(1),$(if $(2),$(2) machtype=$(1),))
+	$(call MkImageLzma,$(1))
+	$(CP) $(KDIR)/uImage-$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1)-uImage
+endef
+
+ifeq ($(CONFIG_SOC_LANTIQ_XWAY),y)
+define Image/BuildKernel
+	$(call Image/BuildKernel/Template,EASY4010,$(xway_cmdline))
+	$(call Image/BuildKernel/Template,EASY50712,$(xway_cmdline))
+	$(call Image/BuildKernel/Template,EASY50812,$(xway_cmdline))
+	$(call Image/BuildKernel/Template,ARV452,$(xway_cmdline))
+	$(call Image/BuildKernel/Template,NONE)
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1),EASY4010)
+	$(call Image/Build/$(1),$(1),EASY50712)
+	$(call Image/Build/$(1),$(1),EASY50812)
+	$(call Image/Build/$(1),$(1),ARV452)
+	$(call Image/Build/$(1),$(1),NONE)
+	$(CP) $(KDIR)/root.$(1)  $(BIN_DIR)/$(IMG_PREFIX)-$(1).rootfs
+endef
+endif
+
+ifeq ($(CONFIG_SOC_LANTIQ_FALCON),y)
+define Image/BuildKernel
+	$(call Image/BuildKernel/Template,EASY98000,$(falcon_cmdline))
+	$(call Image/BuildKernel/Template,NONE)
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1),EASY98000)
+	$(call Image/Build/$(1),$(1),NONE)
+	$(CP) $(KDIR)/root.$(1)  $(BIN_DIR)/$(IMG_PREFIX)-$(1).rootfs
+endef
+endif
+
+$(eval $(call BuildImage))
diff --git a/target/linux/lantiq/modules.mk b/target/linux/lantiq/modules.mk
new file mode 100644
index 0000000000..78289a1a11
--- /dev/null
+++ b/target/linux/lantiq/modules.mk
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define KernelPackage/lantiq-deu
+  TITLE:=Lantiq data encryption unit
+  SUBMENU:=$(CRYPTO_MENU)
+  DEPENDS:=@TARGET_lantiq
+  KCONFIG:=CONFIG_CRYPTO_DEV_LANTIQ \
+	   CONFIG_CRYPTO_HW=y \
+	   CONFIG_CRYPTO_DEV_LANTIQ_AES=y \
+	   CONFIG_CRYPTO_DEV_LANTIQ_DES=y \
+	   CONFIG_CRYPTO_DEV_LANTIQ_MD5=y \
+	   CONFIG_CRYPTO_DEV_LANTIQ_SHA1=y
+  $(call AddDepends/crypto)
+endef
+
+define KernelPackage/lantiq-deu/description
+  Kernel support for the Lantiq crypto HW
+endef
+
+$(eval $(call KernelPackage,lantiq-deu))
+
+USB_MENU:=USB Support
+
+define KernelPackage/usb-dwc-otg
+  TITLE:=Synopsis DWC_OTG support
+  SUBMENU:=$(USB_MENU)
+  DEPENDS+=@TARGET_lantiq_xway +kmod-usb-core
+  KCONFIG:=CONFIG_DWC_OTG \
+  	CONFIG_DWC_OTG_DEBUG=n \
+	CONFIG_DWC_OTG_LANTIQ=y \
+	CONFIG_DWC_OTG_HOST_ONLY=y
+  FILES:=$(LINUX_DIR)/drivers/usb/dwc_otg/dwc_otg.ko
+  AUTOLOAD:=$(call AutoLoad,50,dwc_otg)
+endef
+
+define KernelPackage/usb-dwc-otg/description
+  Kernel support for Synopsis USB on XWAY
+endef
+
+$(eval $(call KernelPackage,usb-dwc-otg))
+
+
diff --git a/target/linux/lantiq/patches/000-mips-bad-intctl.patch b/target/linux/lantiq/patches/000-mips-bad-intctl.patch
new file mode 100644
index 0000000000..7c0f52db06
--- /dev/null
+++ b/target/linux/lantiq/patches/000-mips-bad-intctl.patch
@@ -0,0 +1,35 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -1496,7 +1496,18 @@ void __cpuinit per_cpu_trap_init(void)
+ 	if (cpu_has_mips_r2) {
+ 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
++
++		if (!cp0_compare_irq)
++			cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
++
+ 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
++
++		if (!cp0_perfcount_irq)
++			cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
++
++		if (arch_fixup_c0_irqs)
++			arch_fixup_c0_irqs();
++
+ 		if (cp0_perfcount_irq == cp0_compare_irq)
+ 			cp0_perfcount_irq = -1;
+ 	} else {
+--- a/arch/mips/include/asm/irq.h
++++ b/arch/mips/include/asm/irq.h
+@@ -133,9 +133,11 @@ extern void free_irqno(unsigned int irq)
+  * IE7.  Since R2 their number has to be read from the c0_intctl register.
+  */
+ #define CP0_LEGACY_COMPARE_IRQ 7
++#define CP0_LEGACY_PERFCNT_IRQ 7
+ 
+ extern int cp0_compare_irq;
+ extern int cp0_compare_irq_shift;
+ extern int cp0_perfcount_irq;
++extern void __weak arch_fixup_c0_irqs(void);
+ 
+ #endif /* _ASM_IRQ_H */
diff --git a/target/linux/lantiq/patches/010-mips_clocksource_init_war.patch b/target/linux/lantiq/patches/010-mips_clocksource_init_war.patch
new file mode 100644
index 0000000000..81eabc6dcd
--- /dev/null
+++ b/target/linux/lantiq/patches/010-mips_clocksource_init_war.patch
@@ -0,0 +1,33 @@
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -22,6 +22,22 @@
+ 
+ #ifndef CONFIG_MIPS_MT_SMTC
+ 
++/*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register.  4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++	do { \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++	} while (0)
++
+ static int mips_next_event(unsigned long delta,
+                            struct clock_event_device *evt)
+ {
+@@ -31,6 +47,7 @@ static int mips_next_event(unsigned long
+ 	cnt = read_c0_count();
+ 	cnt += delta;
+ 	write_c0_compare(cnt);
++	compare_change_hazard();
+ 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ 	return res;
+ }
diff --git a/target/linux/lantiq/patches/020-genirq_fix.patch b/target/linux/lantiq/patches/020-genirq_fix.patch
new file mode 100644
index 0000000000..0503d0d2ac
--- /dev/null
+++ b/target/linux/lantiq/patches/020-genirq_fix.patch
@@ -0,0 +1,12 @@
+--- a/kernel/irq/chip.c
++++ b/kernel/irq/chip.c
+@@ -650,6 +650,9 @@ handle_percpu_irq(unsigned int irq, stru
+ 
+ 	kstat_incr_irqs_this_cpu(irq, desc);
+ 
++	if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
++		return;
++
+ 	if (desc->chip->ack)
+ 		desc->chip->ack(irq);
+ 
diff --git a/target/linux/lantiq/patches/100-board.patch b/target/linux/lantiq/patches/100-board.patch
new file mode 100644
index 0000000000..201fa96737
--- /dev/null
+++ b/target/linux/lantiq/patches/100-board.patch
@@ -0,0 +1,641 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -139,6 +139,9 @@ config MACH_DECSTATION
+ 
+ 	  otherwise choose R3000.
+ 
++config LANTIQ
++	bool "Lantiq MIPS"
++
+ config MACH_JAZZ
+ 	bool "Jazz family of machines"
+ 	select ARC
+@@ -693,6 +696,7 @@ source "arch/mips/txx9/Kconfig"
+ source "arch/mips/vr41xx/Kconfig"
+ source "arch/mips/cavium-octeon/Kconfig"
+ source "arch/mips/loongson/Kconfig"
++source "arch/mips/lantiq/Kconfig"
+ 
+ endmenu
+ 
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -317,6 +317,17 @@ cflags-$(CONFIG_MIPS_COBALT)	+= -I$(srct
+ load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
+ 
+ #
++# Lantiq
++#
++load-$(CONFIG_LANTIQ) += 0xffffffff80002000
++core-$(CONFIG_LANTIQ) += arch/mips/lantiq/
++cflags-$(CONFIG_LANTIQ)   += -I$(srctree)/arch/mips/include/asm/mach-lantiq
++core-$(CONFIG_SOC_LANTIQ_FALCON) += arch/mips/lantiq/falcon/
++cflags-$(CONFIG_SOC_LANTIQ_FALCON)   += -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
++core-$(CONFIG_SOC_LANTIQ_XWAY) += arch/mips/lantiq/xway/
++cflags-$(CONFIG_SOC_LANTIQ_XWAY)   += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
++
++#
+ # DECstation family
+ #
+ core-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/
+--- /dev/null
++++ b/arch/mips/lantiq/Kconfig
+@@ -0,0 +1,36 @@
++if LANTIQ
++
++config SOC_LANTIQ
++	bool
++	select DMA_NONCOHERENT
++	select IRQ_CPU
++	select CEVT_R4K
++	select CSRC_R4K
++	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_CPU_MIPS32_R2
++	select SYS_SUPPORTS_BIG_ENDIAN
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select SYS_SUPPORTS_MULTITHREADING
++	select SYS_HAS_EARLY_PRINTK
++	select HW_HAS_PCI
++	select ARCH_REQUIRE_GPIOLIB
++	select SWAP_IO_SPACE
++	select MIPS_MACHINE
++
++choice
++	prompt "SoC Type"
++	default SOC_LANTIQ_XWAY
++
++#config SOC_LANTIQ_FALCON
++#	bool "FALCON"
++#	select SOC_LANTIQ
++
++config SOC_LANTIQ_XWAY
++	bool "XWAY"
++	select SOC_LANTIQ
++endchoice
++
++#source "arch/mips/lantiq/falcon/Kconfig"
++source "arch/mips/lantiq/xway/Kconfig"
++
++endif
+--- /dev/null
++++ b/arch/mips/lantiq/Makefile
+@@ -0,0 +1,2 @@
++obj-y := irq.o setup.o clk.o prom.o
++obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+--- /dev/null
++++ b/arch/mips/lantiq/irq.c
+@@ -0,0 +1,212 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/interrupt.h>
++
++#include <asm/bootinfo.h>
++#include <asm/irq_cpu.h>
++
++#include <lantiq.h>
++#include <irq.h>
++
++#define LQ_ICU_BASE_ADDR	(KSEG1 | 0x1F880200)
++
++#define LQ_ICU_IM0_ISR		((u32 *)(LQ_ICU_BASE_ADDR + 0x0000))
++#define LQ_ICU_IM0_IER		((u32 *)(LQ_ICU_BASE_ADDR + 0x0008))
++#define LQ_ICU_IM0_IOSR		((u32 *)(LQ_ICU_BASE_ADDR + 0x0010))
++#define LQ_ICU_IM0_IRSR		((u32 *)(LQ_ICU_BASE_ADDR + 0x0018))
++#define LQ_ICU_IM0_IMR		((u32 *)(LQ_ICU_BASE_ADDR + 0x0020))
++
++#define LQ_ICU_IM1_ISR		((u32 *)(LQ_ICU_BASE_ADDR + 0x0028))
++#define LQ_ICU_IM2_ISR		((u32 *)(LQ_ICU_BASE_ADDR + 0x0050))
++#define LQ_ICU_IM3_ISR		((u32 *)(LQ_ICU_BASE_ADDR + 0x0078))
++#define LQ_ICU_IM4_ISR		((u32 *)(LQ_ICU_BASE_ADDR + 0x00A0))
++
++#define LQ_ICU_OFFSET		(LQ_ICU_IM1_ISR - LQ_ICU_IM0_ISR)
++
++void
++lq_disable_irq(unsigned int irq_nr)
++{
++	u32 *ier = LQ_ICU_IM0_IER;
++	irq_nr -= INT_NUM_IRQ0;
++	ier += LQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
++	irq_nr %= INT_NUM_IM_OFFSET;
++	lq_w32(lq_r32(ier) & ~(1 << irq_nr), ier);
++}
++EXPORT_SYMBOL(lq_disable_irq);
++
++void
++lq_mask_and_ack_irq(unsigned int irq_nr)
++{
++	u32 *ier = LQ_ICU_IM0_IER;
++	u32 *isr = LQ_ICU_IM0_ISR;
++	irq_nr -= INT_NUM_IRQ0;
++	ier += LQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
++	isr += LQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
++	irq_nr %= INT_NUM_IM_OFFSET;
++	lq_w32(lq_r32(ier) & ~(1 << irq_nr), ier);
++	lq_w32((1 << irq_nr), isr);
++}
++EXPORT_SYMBOL(lq_mask_and_ack_irq);
++
++static void
++lq_ack_irq(unsigned int irq_nr)
++{
++	u32 *isr = LQ_ICU_IM0_ISR;
++	irq_nr -= INT_NUM_IRQ0;
++	isr += LQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
++	irq_nr %= INT_NUM_IM_OFFSET;
++	lq_w32((1 << irq_nr), isr);
++}
++
++void
++lq_enable_irq(unsigned int irq_nr)
++{
++	u32 *ier = LQ_ICU_IM0_IER;
++	irq_nr -= INT_NUM_IRQ0;
++	ier += LQ_ICU_OFFSET  * (irq_nr / INT_NUM_IM_OFFSET);
++	irq_nr %= INT_NUM_IM_OFFSET;
++	lq_w32(lq_r32(ier) | (1 << irq_nr), ier);
++}
++EXPORT_SYMBOL(lq_enable_irq);
++
++static unsigned int
++lq_startup_irq(unsigned int irq)
++{
++	lq_enable_irq(irq);
++	return 0;
++}
++
++static void
++lq_end_irq(unsigned int irq)
++{
++	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++		lq_enable_irq(irq);
++}
++
++static struct irq_chip
++lq_irq_type = {
++	"lq_irq",
++	.startup = lq_startup_irq,
++	.enable = lq_enable_irq,
++	.disable = lq_disable_irq,
++	.unmask = lq_enable_irq,
++	.ack = lq_ack_irq,
++	.mask = lq_disable_irq,
++	.mask_ack = lq_mask_and_ack_irq,
++	.end = lq_end_irq,
++};
++
++static void
++lq_hw_irqdispatch(int module)
++{
++	u32 irq;
++
++	irq = lq_r32(LQ_ICU_IM0_IOSR + (module * LQ_ICU_OFFSET));
++	if (irq == 0)
++		return;
++
++	/* silicon bug causes only the msb set to 1 to be valid. all
++	   other bits might be bogus */
++	irq = __fls(irq);
++	do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
++}
++
++#define DEFINE_HWx_IRQDISPATCH(x) \
++static void lq_hw ## x ## _irqdispatch(void)\
++{\
++	lq_hw_irqdispatch(x); \
++}
++static void lq_hw5_irqdispatch(void)
++{
++	do_IRQ(MIPS_CPU_TIMER_IRQ);
++}
++DEFINE_HWx_IRQDISPATCH(0)
++DEFINE_HWx_IRQDISPATCH(1)
++DEFINE_HWx_IRQDISPATCH(2)
++DEFINE_HWx_IRQDISPATCH(3)
++DEFINE_HWx_IRQDISPATCH(4)
++/*DEFINE_HWx_IRQDISPATCH(5)*/
++
++asmlinkage void
++plat_irq_dispatch(void)
++{
++	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
++	unsigned int i;
++
++	if (pending & CAUSEF_IP7)
++	{
++		do_IRQ(MIPS_CPU_TIMER_IRQ);
++		goto out;
++	} else {
++		for (i = 0; i < 5; i++)
++		{
++			if (pending & (CAUSEF_IP2 << i))
++			{
++				lq_hw_irqdispatch(i);
++				goto out;
++			}
++		}
++	}
++	printk(KERN_ALERT "Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
++
++out:
++	return;
++}
++
++static struct irqaction
++cascade = {
++	.handler = no_action,
++	.flags = IRQF_DISABLED,
++	.name = "cascade",
++};
++
++void __init
++arch_init_irq(void)
++{
++	int i;
++
++	for (i = 0; i < 5; i++)
++		lq_w32(0, LQ_ICU_IM0_IER + (i * LQ_ICU_OFFSET));
++
++	mips_cpu_irq_init();
++
++	for (i = 2; i <= 6; i++)
++		setup_irq(i, &cascade);
++
++	if (cpu_has_vint) {
++		printk(KERN_INFO "Setting up vectored interrupts\n");
++		set_vi_handler(2, lq_hw0_irqdispatch);
++		set_vi_handler(3, lq_hw1_irqdispatch);
++		set_vi_handler(4, lq_hw2_irqdispatch);
++		set_vi_handler(5, lq_hw3_irqdispatch);
++		set_vi_handler(6, lq_hw4_irqdispatch);
++		set_vi_handler(7, lq_hw5_irqdispatch);
++	}
++
++	for (i = INT_NUM_IRQ0; i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
++		set_irq_chip_and_handler(i, &lq_irq_type,
++			handle_level_irq);
++
++	#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
++	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
++		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
++	#else
++	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
++		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
++	#endif
++}
++
++void __cpuinit
++arch_fixup_c0_irqs(void)
++{
++	/* FIXME: check for CPUID and only do fix for specific chips/versions */
++	cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
++	cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
++}
+--- /dev/null
++++ b/arch/mips/lantiq/setup.c
+@@ -0,0 +1,47 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++
++#include <lantiq.h>
++#include <lantiq_regs.h>
++
++void __init
++plat_mem_setup(void)
++{
++	/* assume 16M as default */
++	int memsize = 16;
++	char **envp = (char **) KSEG1ADDR(fw_arg2);
++	u32 status;
++
++	/* make sure to have no "reverse endian" for user mode! */
++	status = read_c0_status();
++	status &= (~(1<<25));
++	write_c0_status(status);
++
++	ioport_resource.start = IOPORT_RESOURCE_START;
++	ioport_resource.end = IOPORT_RESOURCE_END;
++	iomem_resource.start = IOMEM_RESOURCE_START;
++	iomem_resource.end = IOMEM_RESOURCE_END;
++
++	while (*envp)
++	{
++		char *e = (char *)KSEG1ADDR(*envp);
++		if (!strncmp(e, "memsize=", 8))
++		{
++			e += 8;
++			memsize = simple_strtoul(e, NULL, 10);
++		}
++		envp++;
++	}
++	memsize *= 1024 * 1024;
++	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
++}
+--- /dev/null
++++ b/arch/mips/lantiq/clk.c
+@@ -0,0 +1,141 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 Thomas Langer, Lantiq Deutschland
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/list.h>
++
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/div64.h>
++
++#include <lantiq.h>
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++#include <xway.h>
++#endif
++
++extern unsigned long lq_get_cpu_hz(void);
++extern unsigned long lq_get_fpi_hz(void);
++extern unsigned long lq_get_io_region_clock(void);
++
++struct clk {
++	const char *name;
++	unsigned long rate;
++	unsigned long (*get_rate) (void);
++};
++
++static struct clk *cpu_clk = 0;
++static int cpu_clk_cnt = 0;
++
++static unsigned int r4k_offset;
++static unsigned int r4k_cur;
++
++static struct clk cpu_clk_generic[] = {
++	{
++		.name = "cpu",
++		.get_rate = lq_get_cpu_hz,
++	}, {
++		.name = "fpi",
++		.get_rate = lq_get_fpi_hz,
++	}, {
++		.name = "io",
++		.get_rate = lq_get_io_region_clock,
++	},
++};
++
++void
++clk_init(void)
++{
++	int i;
++	cpu_clk = cpu_clk_generic;
++	cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
++	for(i = 0; i < cpu_clk_cnt; i++)
++		printk("%s: %ld\n", cpu_clk[i].name, clk_get_rate(&cpu_clk[i]));
++}
++
++static inline int
++clk_good(struct clk *clk)
++{
++	return clk && !IS_ERR(clk);
++}
++
++unsigned long
++clk_get_rate(struct clk *clk)
++{
++	if (unlikely(!clk_good(clk)))
++		return 0;
++
++	if (clk->rate != 0)
++		return clk->rate;
++
++	if (clk->get_rate != NULL)
++		return clk->get_rate();
++
++	return 0;
++}
++EXPORT_SYMBOL(clk_get_rate);
++
++struct clk*
++clk_get(struct device *dev, const char *id)
++{
++	int i;
++	for(i = 0; i < cpu_clk_cnt; i++)
++		if (!strcmp(id, cpu_clk[i].name))
++			return &cpu_clk[i];
++	BUG();
++	return ERR_PTR(-ENOENT);
++}
++EXPORT_SYMBOL(clk_get);
++
++void
++clk_put(struct clk *clk)
++{
++	/* not used */
++}
++EXPORT_SYMBOL(clk_put);
++
++static inline u32
++lq_get_counter_resolution(void)
++{
++	u32 res;
++	__asm__ __volatile__(
++		".set   push\n"
++		".set   mips32r2\n"
++		".set   noreorder\n"
++		"rdhwr  %0, $3\n"
++		"ehb\n"
++		".set pop\n"
++		: "=&r" (res)
++		: /* no input */
++		: "memory");
++	instruction_hazard();
++	return res;
++}
++
++void __init
++plat_time_init(void)
++{
++	struct clk *clk = clk_get(0, "cpu");
++	mips_hpt_frequency = clk_get_rate(clk) / lq_get_counter_resolution();
++	r4k_cur = (read_c0_count() + r4k_offset);
++	write_c0_compare(r4k_cur);
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++#define LQ_GPTU_GPT_CLC			((u32 *)(LQ_GPTU_BASE_ADDR + 0x0000))
++	lq_pmu_enable(PMU_GPT);
++	lq_pmu_enable(PMU_FPI);
++
++	lq_w32(0x100, LQ_GPTU_GPT_CLC);
++#endif
++}
+--- /dev/null
++++ b/arch/mips/lantiq/prom.c
+@@ -0,0 +1,118 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <asm/bootinfo.h>
++#include <asm/time.h>
++
++#include <lantiq.h>
++
++#include "prom.h"
++
++static struct lq_soc_info soc_info;
++
++/* for Multithreading (APRP) on MIPS34K */
++unsigned long physical_memsize;
++
++/* all access to the ebu must be locked */
++DEFINE_SPINLOCK(ebu_lock);
++EXPORT_SYMBOL_GPL(ebu_lock);
++
++extern void clk_init(void);
++
++unsigned int
++lq_get_cpu_ver(void)
++{
++	return soc_info.rev;
++}
++EXPORT_SYMBOL(lq_get_cpu_ver);
++
++unsigned int
++lq_get_soc_type(void)
++{
++	return soc_info.type;
++}
++EXPORT_SYMBOL(lq_get_soc_type);
++
++const char*
++get_system_type(void)
++{
++	return soc_info.sys_type;
++}
++
++void
++prom_free_prom_memory(void)
++{
++}
++
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static void __init
++prom_init_image_cmdline(void)
++{
++	char *p = __image_cmdline;
++	int replace = 0;
++
++	if (*p == '-') {
++		replace = 1;
++		p++;
++	}
++
++	if (*p == '\0')
++		return;
++
++	if (replace) {
++		strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++	} else {
++		strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++		strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++	}
++}
++#else
++static void __init prom_init_image_cmdline(void) { return; }
++#endif
++
++static void __init
++prom_init_cmdline(void)
++{
++	int argc = fw_arg0;
++	char **argv = (char**)KSEG1ADDR(fw_arg1);
++	int i;
++
++	arcs_cmdline[0] = '\0';
++	if(argc)
++		for (i = 1; i < argc; i++)
++		{
++			strlcat(arcs_cmdline, (char*)KSEG1ADDR(argv[i]), COMMAND_LINE_SIZE);
++			if(i + 1 != argc)
++				strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
++		}
++
++	if (!*arcs_cmdline)
++		strcpy(&(arcs_cmdline[0]),
++			"console=ttyS1,115200 rootfstype=squashfs,jffs2");
++	prom_init_image_cmdline();
++}
++
++void __init
++prom_init(void)
++{
++	struct clk *clk;
++	lq_soc_detect(&soc_info);
++
++	clk_init();
++	clk = clk_get(0, "cpu");
++	snprintf(soc_info.sys_type, LQ_SYS_TYPE_LEN - 1, "%s rev1.%d %ldMhz",
++		soc_info.name, soc_info.rev, clk_get_rate(clk) / 1000000);
++	soc_info.sys_type[LQ_SYS_TYPE_LEN - 1] = '\0';
++	printk("SoC: %s\n", soc_info.sys_type);
++
++	prom_init_cmdline();
++}
+--- /dev/null
++++ b/arch/mips/lantiq/prom.h
+@@ -0,0 +1,24 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LQ_PROM_H__
++#define _LQ_PROM_H__
++
++#define LQ_SYS_TYPE_LEN	0x100
++
++struct lq_soc_info {
++	unsigned char *name;
++	unsigned int rev;
++	unsigned int partnum;
++	unsigned int type;
++	unsigned char sys_type[LQ_SYS_TYPE_LEN];
++};
++
++void lq_soc_detect(struct lq_soc_info *i);
++
++#endif
diff --git a/target/linux/lantiq/patches/101-header.patch b/target/linux/lantiq/patches/101-header.patch
new file mode 100644
index 0000000000..3d0caf2f16
--- /dev/null
+++ b/target/linux/lantiq/patches/101-header.patch
@@ -0,0 +1,136 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/war.h
+@@ -0,0 +1,24 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ */
++#ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H
++#define __ASM_MIPS_MACH_LANTIQ_WAR_H
++
++#define R4600_V1_INDEX_ICACHEOP_WAR     0
++#define R4600_V1_HIT_CACHEOP_WAR        0
++#define R4600_V2_HIT_CACHEOP_WAR        0
++#define R5432_CP0_INTERRUPT_WAR         0
++#define BCM1250_M3_WAR                  0
++#define SIBYTE_1956_WAR                 0
++#define MIPS4K_ICACHE_REFILL_WAR        0
++#define MIPS_CACHE_SYNC_WAR             0
++#define TX49XX_ICACHE_INDEX_INV_WAR     0
++#define RM9000_CDEX_SMP_WAR             0
++#define ICACHE_REFILLS_WORKAROUND_WAR   0
++#define R10000_LLSC_WAR                 0
++#define MIPS34K_MISSED_ITLB_WAR         0
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -0,0 +1,47 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LANTIQ_H__
++#define _LANTIQ_H__
++
++/* generic reg access functions */
++#define lq_r32(reg)						__raw_readl(reg)
++#define lq_w32(val, reg)				__raw_writel(val, reg)
++#define lq_w32_mask(clear, set, reg)	lq_w32((lq_r32(reg) & ~clear) | set, reg)
++
++extern unsigned int lq_get_cpu_ver(void);
++extern unsigned int lq_get_soc_type(void);
++
++/* clock speeds */
++#define CLOCK_60M			60000000
++#define CLOCK_83M			83333333
++#define CLOCK_111M			111111111
++#define CLOCK_111M			111111111
++#define CLOCK_133M			133333333
++#define CLOCK_167M			166666667
++#define CLOCK_200M			200000000
++#define CLOCK_333M			333333333
++#define CLOCK_400M			400000000
++
++/* spinlock all ebu i/o */
++extern spinlock_t ebu_lock;
++
++/* some irq helpers */
++extern void lq_disable_irq(unsigned int irq_nr);
++extern void lq_mask_and_ack_irq(unsigned int irq_nr);
++extern void lq_enable_irq(unsigned int irq_nr);
++
++#define IOPORT_RESOURCE_START		0x10000000
++#define IOPORT_RESOURCE_END		0xffffffff
++#define IOMEM_RESOURCE_START		0x10000000
++#define IOMEM_RESOURCE_END		0xffffffff
++
++#define LQ_FLASH_START		0x10000000
++#define LQ_FLASH_MAX		0x04000000
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_regs.h
+@@ -0,0 +1,17 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LANTIQ_REGS_H__
++#define _LANTIQ_REGS_H__
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++#include <xway.h>
++#include <xway_irq.h>
++#endif
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
+@@ -0,0 +1,36 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LANTIQ_PLATFORM_H__
++#define _LANTIQ_PLATFORM_H__
++
++#include <linux/mtd/partitions.h>
++
++/* struct used to pass info to network drivers */
++enum {
++	MII_MODE,
++	REV_MII_MODE,
++};
++
++struct lq_eth_data {
++	unsigned char *mac;
++	int mii_mode;
++};
++
++/* struct used to pass info to the pci core */
++enum {
++	PCI_CLOCK_INT = 0,
++	PCI_CLOCK_EXT
++};
++
++struct lq_pci_data {
++	int clock;
++	int req_mask;
++};
++
++#endif
diff --git a/target/linux/lantiq/patches/104-board_xway.patch b/target/linux/lantiq/patches/104-board_xway.patch
new file mode 100644
index 0000000000..1aaeab63e1
--- /dev/null
+++ b/target/linux/lantiq/patches/104-board_xway.patch
@@ -0,0 +1,3129 @@
+
+--- /dev/null
++++ b/arch/mips/lantiq/xway/Kconfig
+@@ -0,0 +1,19 @@
++if SOC_LANTIQ_XWAY
++
++menu "Mips Machine"
++
++config LANTIQ_MACH_EASY50812
++	bool "Easy50812"
++	default y
++
++config LANTIQ_MACH_EASY50712
++	bool "Easy50712"
++	default y
++
++config LANTIQ_MACH_EASY4010
++	bool "Easy4010"
++	default y
++
++endmenu
++
++endif
+--- /dev/null
++++ b/arch/mips/lantiq/xway/gpio_ebu.c
+@@ -0,0 +1,107 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/gpio.h>
++
++#include <xway.h>
++
++#define LQ_EBU_BUSCON	0x1e7ff
++#define LQ_EBU_WP		0x80000000
++
++static int shadow = 0x0000;
++static void __iomem *virt;
++
++static int
++lq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, int value)
++{
++	return 0;
++}
++
++static void
++lq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++	unsigned long flags;
++	if(value)
++		shadow |= (1 << offset);
++	else
++		shadow &= ~(1 << offset);
++	spin_lock_irqsave(&ebu_lock, flags);
++	lq_w32(LQ_EBU_BUSCON, LQ_EBU_BUSCON1);
++	*((__u16*)virt) = shadow;
++	lq_w32(LQ_EBU_BUSCON | LQ_EBU_WP, LQ_EBU_BUSCON1);
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
++static struct gpio_chip
++lq_ebu_chip =
++{
++	.label = "lq_ebu",
++	.direction_output = lq_ebu_direction_output,
++	.set = lq_ebu_set,
++	.base = 32,
++	.ngpio = 16,
++	.can_sleep = 1,
++	.owner = THIS_MODULE,
++};
++
++static int __devinit
++lq_ebu_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int ret = 0;
++	if (!res)
++		return -ENOENT;
++	res = request_mem_region(res->start, resource_size(res),
++		dev_name(&pdev->dev));
++	if (!res)
++		return -EBUSY;
++
++	/* tell the ebu controller which mem addr we will be using */
++	lq_w32(pdev->resource->start | 0x1, LQ_EBU_ADDRSEL1);
++	lq_w32(LQ_EBU_BUSCON | LQ_EBU_WP, LQ_EBU_BUSCON1);
++
++	virt = ioremap_nocache(res->start, resource_size(res));
++	if (!virt)
++	{
++		dev_err(&pdev->dev, "Failed to ioremap mem region\n");
++		ret = -ENOMEM;
++		goto err_release_mem_region;
++	}
++	/* grab the default settings passed form the platform code */
++	shadow = (unsigned int) pdev->dev.platform_data;
++
++	ret = gpiochip_add(&lq_ebu_chip);
++	if (!ret)
++		return 0;
++
++err_release_mem_region:
++	release_mem_region(res->start, resource_size(res));
++	return ret;
++}
++
++static struct platform_driver
++lq_ebu_driver = {
++	.probe = lq_ebu_probe,
++	.driver = {
++		.name = "lq_ebu",
++		.owner = THIS_MODULE,
++	},
++};
++
++static int __init
++init_lq_ebu(void)
++{
++	return platform_driver_register(&lq_ebu_driver);
++}
++
++arch_initcall(init_lq_ebu);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/gpio_leds.c
+@@ -0,0 +1,161 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2007 John Crispin <blogic@openwrt.org>
++ *
++ */
++
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/gpio.h>
++
++#include <xway.h>
++
++#define LQ_STP_BASE			0x1E100BB0
++#define LQ_STP_SIZE			0x40
++
++#define LQ_STP_CON0			0x00
++#define LQ_STP_CON1			0x04
++#define LQ_STP_CPU0			0x08
++#define LQ_STP_CPU1			0x0C
++#define LQ_STP_AR			0x10
++
++#define STP_CON0_SWU		(1 << 31)
++
++#define LQ_STP_2HZ			(0)
++#define LQ_STP_4HZ			(1 << 23)
++#define LQ_STP_8HZ			(2 << 23)
++#define LQ_STP_10HZ			(3 << 23)
++#define LQ_STP_MASK			(0xf << 23)
++
++#define LQ_STP_UPD_SRC_FPI	(1 << 31)
++#define LQ_STP_UPD_MASK		(3 << 30)
++#define LQ_STP_ADSL_SRC		(3 << 24)
++
++#define LQ_STP_GROUP0		(1 << 0)
++
++#define LQ_STP_RISING		0
++#define LQ_STP_FALLING		(1 << 26)
++#define LQ_STP_EDGE_MASK	(1 << 26)
++
++#define lq_stp_r32(reg)				__raw_readl(virt + reg)
++#define lq_stp_w32(val, reg)		__raw_writel(val, virt + reg)
++#define lq_stp_w32_mask(clear, set, reg) \
++        lq_w32((lq_r32(virt + reg) & ~clear) | set, virt + reg)
++
++static int shadow = 0xffff;
++static void __iomem *virt;
++
++static int
++lq_stp_direction_output(struct gpio_chip *chip, unsigned offset, int value)
++{
++	return 0;
++}
++
++static void
++lq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++	if(value)
++		shadow |= (1 << offset);
++	else
++		shadow &= ~(1 << offset);
++	lq_stp_w32(shadow, LQ_STP_CPU0);
++}
++
++static struct gpio_chip lq_stp_chip =
++{
++	.label = "lq_stp",
++	.direction_output = lq_stp_direction_output,
++	.set = lq_stp_set,
++	.base = 48,
++	.ngpio = 24,
++	.can_sleep = 1,
++	.owner = THIS_MODULE,
++};
++
++static int
++lq_stp_hw_init(void)
++{
++	/* the 3 pins used to control the external stp */
++	lq_gpio_request(4, 1, 0, 1, "stp-st");
++	lq_gpio_request(5, 1, 0, 1, "stp-d");
++	lq_gpio_request(6, 1, 0, 1, "stp-sh");
++
++	/* sane defaults */
++	lq_stp_w32(0, LQ_STP_AR);
++	lq_stp_w32(0, LQ_STP_CPU0);
++	lq_stp_w32(0, LQ_STP_CPU1);
++	lq_stp_w32(STP_CON0_SWU, LQ_STP_CON0);
++	lq_stp_w32(0, LQ_STP_CON1);
++
++	/* rising or falling edge */
++	lq_stp_w32_mask(LQ_STP_EDGE_MASK, LQ_STP_FALLING, LQ_STP_CON0);
++
++	/* per default stp 15-0 are set */
++	lq_stp_w32_mask(0, LQ_STP_GROUP0, LQ_STP_CON1);
++
++	/* stp are update periodically by the FPID */
++	lq_stp_w32_mask(LQ_STP_UPD_MASK, LQ_STP_UPD_SRC_FPI, LQ_STP_CON1);
++
++	/* set stp update speed */
++	lq_stp_w32_mask(LQ_STP_MASK, LQ_STP_8HZ, LQ_STP_CON1);
++
++	/* adsl 0 and 1 stp are updated by the arc */
++	lq_stp_w32_mask(0, LQ_STP_ADSL_SRC, LQ_STP_CON0);
++
++	lq_pmu_enable(PMU_LED);
++	return 0;
++}
++
++static int
++lq_stp_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int ret = 0;
++	if (!res)
++		return -ENOENT;
++	res = request_mem_region(res->start, resource_size(res),
++		dev_name(&pdev->dev));
++	if (!res)
++		return -EBUSY;
++	virt = ioremap_nocache(res->start, resource_size(res));
++	if(!virt)
++	{
++		ret = -ENOMEM;
++		goto err_release_mem_region;
++	}
++	ret = gpiochip_add(&lq_stp_chip);
++	if(!ret)
++		return lq_stp_hw_init();
++
++	iounmap(virt);
++err_release_mem_region:
++	release_mem_region(res->start, resource_size(res));
++	return ret;
++}
++
++static struct platform_driver lq_stp_driver = {
++	.probe = lq_stp_probe,
++	.driver = {
++		.name = "lq_stp",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init
++init_lq_stp(void)
++{
++	int ret = platform_driver_register(&lq_stp_driver);
++	if (ret)
++		printk(KERN_INFO
++			"lq_stp: error registering platfom driver");
++	return ret;
++}
++
++arch_initcall(init_lq_stp);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/mach-easy4010.c
+@@ -0,0 +1,79 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/gpio.h>
++#include <linux/gpio_buttons.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++
++#include <machine.h>
++
++#include <xway.h>
++#include <lantiq_platform.h>
++
++#include "devices.h"
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition easy4010_partitions[] =
++{
++	{
++		.name	= "uboot",
++		.offset	= 0x0,
++		.size	= 0x20000,
++	},
++	{
++		.name	= "uboot_env",
++		.offset	= 0x20000,
++		.size	= 0x10000,
++	},
++	{
++		.name	= "linux",
++		.offset	= 0x30000,
++		.size	= 0x3D0000,
++	},
++};
++#endif
++
++static struct physmap_flash_data easy4010_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++	.nr_parts	= ARRAY_SIZE(easy4010_partitions),
++	.parts		= easy4010_partitions,
++#endif
++};
++
++static struct lq_pci_data lq_pci_data = {
++	.clock      = PCI_CLOCK_INT,
++	.req_mask   = 0xf,
++};
++
++static struct lq_eth_data lq_eth_data = {
++	.mii_mode = REV_MII_MODE,
++};
++
++static void __init
++easy4010_init(void)
++{
++	lq_register_gpio();
++	lq_register_gpio_stp();
++	lq_register_asc(0);
++	lq_register_asc(1);
++	lq_register_nor(&easy4010_flash_data);
++	lq_register_wdt();
++	lq_register_pci(&lq_pci_data);
++	lq_register_ethernet(&lq_eth_data);
++}
++
++MIPS_MACHINE(LANTIQ_MACH_EASY4010,
++			"EASY4010",
++			"EASY4010 Eval Board",
++			easy4010_init);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/mach-easy50712.c
+@@ -0,0 +1,79 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/gpio.h>
++#include <linux/gpio_buttons.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++
++#include <machine.h>
++
++#include <xway.h>
++#include <lantiq_platform.h>
++
++#include "devices.h"
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition easy50712_partitions[] =
++{
++	{
++		.name	= "uboot",
++		.offset	= 0x0,
++		.size	= 0x20000,
++	},
++	{
++		.name	= "uboot_env",
++		.offset	= 0x20000,
++		.size	= 0x10000,
++	},
++	{
++		.name	= "linux",
++		.offset	= 0x30000,
++		.size	= 0x3D0000,
++	},
++};
++#endif
++
++static struct physmap_flash_data easy50712_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++	.nr_parts	= ARRAY_SIZE(easy50712_partitions),
++	.parts		= easy50712_partitions,
++#endif
++};
++
++static struct lq_pci_data lq_pci_data = {
++	.clock      = PCI_CLOCK_INT,
++	.req_mask   = 0xf,
++};
++
++static struct lq_eth_data lq_eth_data = {
++	.mii_mode = REV_MII_MODE,
++};
++
++static void __init
++easy50712_init(void)
++{
++	lq_register_asc(0);
++	lq_register_asc(1);
++	lq_register_gpio();
++	lq_register_gpio_stp();
++	lq_register_nor(&easy50712_flash_data);
++	lq_register_wdt();
++	lq_register_pci(&lq_pci_data);
++	lq_register_ethernet(&lq_eth_data);
++}
++
++MIPS_MACHINE(LANTIQ_MACH_EASY50712,
++			"EASY50712",
++			"EASY50712 Eval Board",
++			easy50712_init);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/mach-easy50812.c
+@@ -0,0 +1,78 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/gpio.h>
++#include <linux/gpio_buttons.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++
++#include <machine.h>
++
++#include <xway.h>
++#include <lantiq_platform.h>
++
++#include "devices.h"
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition easy50812_partitions[] =
++{
++	{
++		.name	= "uboot",
++		.offset	= 0x0,
++		.size	= 0x40000,
++	},
++	{
++		.name	= "uboot_env",
++		.offset	= 0x40000,
++		.size	= 0x10000,
++	},
++	{
++		.name	= "linux",
++		.offset	= 0x50000,
++		.size	= 0x3B0000,
++	},
++};
++#endif
++
++static struct physmap_flash_data easy50812_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++	.nr_parts	= ARRAY_SIZE(easy50812_partitions),
++	.parts		= easy50812_partitions,
++#endif
++};
++
++static struct lq_pci_data lq_pci_data = {
++	.clock      = PCI_CLOCK_INT,
++	.req_mask   = 0xf,
++};
++
++static struct lq_eth_data lq_eth_data = {
++	.mii_mode = REV_MII_MODE,
++};
++
++static void __init
++easy50812_init(void)
++{
++	lq_register_gpio();
++	lq_register_asc(0);
++	lq_register_asc(1);
++	lq_register_nor(&easy50812_flash_data);
++	lq_register_wdt();
++	lq_register_pci(&lq_pci_data);
++	lq_register_ethernet(&lq_eth_data);
++}
++
++MIPS_MACHINE(LANTIQ_MACH_EASY50812,
++			"EASY50812",
++			"EASY50812 Eval Board",
++			easy50812_init);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -0,0 +1,52 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <asm/bootinfo.h>
++#include <asm/time.h>
++
++#include <xway.h>
++
++#include "../prom.h"
++
++#define SOC_DANUBE		"Danube"
++#define SOC_TWINPASS	"Twinpass"
++#define SOC_AR9			"AR9"
++
++void __init
++lq_soc_detect(struct lq_soc_info *i)
++{
++	i->partnum = (lq_r32(LQ_MPS_CHIPID) & 0x0FFFFFFF) >> 12;
++	i->rev = (lq_r32(LQ_MPS_CHIPID) & 0xF0000000) >> 28;
++	switch (i->partnum)
++	{
++	case SOC_ID_DANUBE1:
++	case SOC_ID_DANUBE2:
++		i->name = SOC_DANUBE;
++		i->type = SOC_TYPE_DANUBE;
++		break;
++
++	case SOC_ID_TWINPASS:
++		i->name = SOC_TWINPASS;
++		i->type = SOC_TYPE_DANUBE;
++		break;
++
++	case SOC_ID_ARX188:
++	case SOC_ID_ARX168:
++	case SOC_ID_ARX182:
++		i->name = SOC_AR9;
++		i->type = SOC_TYPE_AR9;
++		break;
++
++	default:
++		printk(KERN_ERR "unknown chiprev : 0x%08X\n", i->partnum);
++		while(1) {	};
++		break;
++	}
++}
+--- /dev/null
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -0,0 +1,278 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mtd/physmap.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/etherdevice.h>
++#include <linux/reboot.h>
++#include <linux/time.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++
++#include <xway.h>
++#include <xway_irq.h>
++#include <lantiq_platform.h>
++
++#define IRQ_RES(resname,irq) {.name=#resname,.start=(irq),.flags=IORESOURCE_IRQ}
++
++/* gpio leds */
++static struct gpio_led_platform_data lq_gpio_led_data;
++
++static struct platform_device lq_gpio_leds =
++{
++	.name = "leds-gpio",
++	.dev = {
++		.platform_data = (void *) &lq_gpio_led_data,
++	}
++};
++
++void __init
++lq_register_gpio_leds(struct gpio_led *leds, int cnt)
++{
++	lq_gpio_led_data.leds = leds;
++	lq_gpio_led_data.num_leds = cnt;
++	platform_device_register(&lq_gpio_leds);
++}
++
++/* serial to parallel conversion */
++static struct resource lq_stp_resource =
++{
++	.name	= "stp",
++	.start	= LQ_STP_BASE,
++	.end	= LQ_STP_BASE + LQ_STP_SIZE - 1,
++	.flags	= IORESOURCE_MEM,
++};
++
++void __init
++lq_register_gpio_stp(void)
++{
++	platform_device_register_simple("lq_stp", 0, &lq_stp_resource, 1);
++}
++
++/* nor flash */
++static struct resource lq_nor_resource =
++{
++	.name	= "nor",
++	.start	= LQ_FLASH_START,
++	.end	= LQ_FLASH_START + LQ_FLASH_MAX - 1,
++	.flags  = IORESOURCE_MEM,
++};
++
++static struct platform_device lq_nor =
++{
++	.name			= "lq_nor",
++	.resource		= &lq_nor_resource,
++	.num_resources	= 1,
++};
++
++void __init
++lq_register_nor(struct physmap_flash_data *data)
++{
++	lq_nor.dev.platform_data = data;
++	platform_device_register(&lq_nor);
++}
++
++/* watchdog */
++static struct resource lq_wdt_resource =
++{
++	.name	= "watchdog",
++	.start  = LQ_WDT_BASE,
++	.end    = LQ_WDT_BASE + LQ_WDT_SIZE - 1,
++	.flags  = IORESOURCE_MEM,
++};
++
++void __init
++lq_register_wdt(void)
++{
++	platform_device_register_simple("lq_wdt", 0, &lq_wdt_resource, 1);
++}
++
++/* gpio */
++static struct resource lq_gpio_resource[] = {
++	{
++		.name	= "gpio0",
++		.start  = LQ_GPIO0_BASE_ADDR,
++		.end    = LQ_GPIO0_BASE_ADDR + LQ_GPIO_SIZE - 1,
++		.flags  = IORESOURCE_MEM,
++	}, {
++		.name	= "gpio1",
++		.start  = LQ_GPIO1_BASE_ADDR,
++		.end    = LQ_GPIO1_BASE_ADDR + LQ_GPIO_SIZE - 1,
++		.flags  = IORESOURCE_MEM,
++	}
++};
++
++void __init
++lq_register_gpio(void)
++{
++	platform_device_register_simple("lq_gpio", 0, &lq_gpio_resource[0], 1);
++	platform_device_register_simple("lq_gpio", 1, &lq_gpio_resource[1], 1);
++}
++
++/* pci */
++static struct platform_device lq_pci =
++{
++	.name			= "lq_pci",
++	.num_resources	= 0,
++};
++
++void __init
++lq_register_pci(struct lq_pci_data *data)
++{
++	lq_pci.dev.platform_data = data;
++	platform_device_register(&lq_pci);
++}
++
++/* ebu */
++static struct resource lq_ebu_resource =
++{
++	.name	= "gpio_ebu",
++	.start	= LQ_EBU_GPIO_START,
++	.end	= LQ_EBU_GPIO_START + LQ_EBU_GPIO_SIZE - 1,
++	.flags	= IORESOURCE_MEM,
++};
++
++void __init
++lq_register_gpio_ebu(unsigned int value)
++{
++	platform_device_register_simple("lq_ebu", 0, &lq_ebu_resource, 1);
++}
++
++/* ethernet */
++unsigned char lq_ethaddr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++
++static int __init
++lq_set_ethaddr(char *str)
++{
++	sscanf(&str[8], "0%02hhx:0%02hhx:0%02hhx:0%02hhx:0%02hhx:0%02hhx",
++		&lq_ethaddr[0], &lq_ethaddr[1], &lq_ethaddr[2],
++		&lq_ethaddr[3], &lq_ethaddr[4], &lq_ethaddr[5]);
++	return 0;
++}
++__setup("ethaddr=", lq_set_ethaddr);
++
++static struct resource lq_ethernet_resources =
++{
++	.name	= "etop",
++	.start  = LQ_PPE32_BASE_ADDR,
++	.end    = LQ_PPE32_BASE_ADDR + LQ_PPE32_SIZE - 1,
++	.flags  = IORESOURCE_MEM,
++};
++
++static struct platform_device lq_ethernet =
++{
++	.name			= "lq_etop",
++	.resource		= &lq_ethernet_resources,
++	.num_resources	= 1,
++};
++
++void __init
++lq_register_ethernet(struct lq_eth_data *eth)
++{
++	if(!eth)
++		return;
++	if(!eth->mac)
++		eth->mac = lq_ethaddr;
++	if(!is_valid_ether_addr(eth->mac))
++		random_ether_addr(eth->mac);
++	lq_ethernet.dev.platform_data = eth;
++	platform_device_register(&lq_ethernet);
++}
++
++/* tapi */
++static struct resource mps_resources[] = {
++	{
++		.name = "voice-mem",
++		.flags = IORESOURCE_MEM,
++		.start = 0x1f107000,
++		.end =   0x1f1073ff,
++	},
++	{
++		.name = "voice-mailbox",
++		.flags = IORESOURCE_MEM,
++		.start = 0x1f200000,
++		.end =   0x1f2007ff,
++	},
++};
++
++static struct platform_device mps_device = {
++	.name = "mps",
++	.resource = mps_resources,
++	.num_resources = ARRAY_SIZE(mps_resources),
++};
++
++static struct platform_device vmmc_device = {
++	.name = "vmmc",
++	.dev = {
++		.parent = &mps_device.dev,
++	},
++};
++
++void __init
++lq_register_tapi(void)
++{
++#define CP1_SIZE	(1 << 20)
++	dma_addr_t dma;
++	mps_device.dev.platform_data =
++		(void*)CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, &dma, GFP_ATOMIC));
++	platform_device_register(&mps_device);
++	platform_device_register(&vmmc_device);
++}
++
++/* asc ports */
++static struct resource lq_asc0_resources[] =
++{
++	{
++		.start  = LQ_ASC0_BASE,
++		.end    = LQ_ASC0_BASE + LQ_ASC_SIZE - 1,
++		.flags  = IORESOURCE_MEM,
++	},
++	IRQ_RES(tx, INT_NUM_IM3_IRL0),
++	IRQ_RES(rx, INT_NUM_IM3_IRL0 + 1),
++	IRQ_RES(err, INT_NUM_IM3_IRL0 + 2),
++};
++
++static struct resource lq_asc1_resources[] =
++{
++	{
++		.start  = LQ_ASC1_BASE,
++		.end    = LQ_ASC1_BASE + LQ_ASC_SIZE - 1,
++		.flags  = IORESOURCE_MEM,
++	},
++	IRQ_RES(tx, INT_NUM_IM3_IRL0 + 8),
++	IRQ_RES(rx, INT_NUM_IM3_IRL0 + 9),
++	IRQ_RES(err, INT_NUM_IM3_IRL0 + 10),
++};
++
++void __init
++lq_register_asc(int port)
++{
++	switch (port) {
++	case 0:
++		platform_device_register_simple("lq_asc", 0,
++			lq_asc0_resources, ARRAY_SIZE(lq_asc0_resources));
++		break;
++	case 1:
++		platform_device_register_simple("lq_asc", 1,
++			lq_asc1_resources, ARRAY_SIZE(lq_asc1_resources));
++		break;
++	default:
++		break;
++	}
++}
+--- /dev/null
++++ b/arch/mips/lantiq/xway/devices.h
+@@ -0,0 +1,24 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LQ_DEVICES_H__
++#define _LQ_DEVICES_H__
++
++#include <lantiq_platform.h>
++
++extern void __init lq_register_gpio(void);
++extern void __init lq_register_gpio_stp(void);
++extern void __init lq_register_gpio_ebu(unsigned int value);
++extern void __init lq_register_gpio_leds(struct gpio_led *leds, int cnt);
++extern void __init lq_register_pci(struct lq_pci_data *data);
++extern void __init lq_register_nor(struct physmap_flash_data *data);
++extern void __init lq_register_wdt(void);
++extern void __init lq_register_ethernet(struct lq_eth_data *eth);
++extern void __init lq_register_asc(int port);
++
++#endif
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -0,0 +1,701 @@
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/timer.h>
++#include <linux/fs.h>
++#include <linux/errno.h>
++#include <linux/stat.h>
++#include <linux/mm.h>
++#include <linux/tty.h>
++#include <linux/selection.h>
++#include <linux/kmod.h>
++#include <linux/vmalloc.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/uaccess.h>
++#include <linux/errno.h>
++#include <linux/io.h>
++
++#include <xway.h>
++#include <xway_irq.h>
++#include <xway_dma.h>
++
++#define LQ_DMA_CS			((u32 *)(LQ_DMA_BASE_ADDR + 0x18))
++#define LQ_DMA_CIE			((u32 *)(LQ_DMA_BASE_ADDR + 0x2C))
++#define LQ_DMA_IRNEN		((u32 *)(LQ_DMA_BASE_ADDR + 0xf4))
++#define LQ_DMA_CCTRL		((u32 *)(LQ_DMA_BASE_ADDR + 0x1C))
++#define LQ_DMA_CIS			((u32 *)(LQ_DMA_BASE_ADDR + 0x28))
++#define LQ_DMA_CDLEN		((u32 *)(LQ_DMA_BASE_ADDR + 0x24))
++#define LQ_DMA_PS			((u32 *)(LQ_DMA_BASE_ADDR + 0x40))
++#define LQ_DMA_PCTRL		((u32 *)(LQ_DMA_BASE_ADDR + 0x44))
++#define LQ_DMA_CTRL		((u32 *)(LQ_DMA_BASE_ADDR + 0x10))
++#define LQ_DMA_CPOLL		((u32 *)(LQ_DMA_BASE_ADDR + 0x14))
++#define LQ_DMA_CDBA		((u32 *)(LQ_DMA_BASE_ADDR + 0x20))
++
++/*25 descriptors for each dma channel,4096/8/20=25.xx*/
++#define LQ_DMA_DESCRIPTOR_OFFSET 25
++
++#define MAX_DMA_DEVICE_NUM  6	/*max ports connecting to dma */
++#define MAX_DMA_CHANNEL_NUM 20	/*max dma channels */
++#define DMA_INT_BUDGET      100	/*budget for interrupt handling */
++#define DMA_POLL_COUNTER    4	/*fix me, set the correct counter value here! */
++
++extern void lq_mask_and_ack_irq(unsigned int irq_nr);
++extern void lq_enable_irq(unsigned int irq_nr);
++extern void lq_disable_irq(unsigned int irq_nr);
++
++u64 *g_desc_list;
++struct dma_device_info dma_devs[MAX_DMA_DEVICE_NUM];
++struct dma_channel_info dma_chan[MAX_DMA_CHANNEL_NUM];
++
++static const char *global_device_name[MAX_DMA_DEVICE_NUM] =
++	{ "PPE", "DEU", "SPI", "SDIO", "MCTRL0", "MCTRL1" };
++
++struct dma_chan_map default_dma_map[MAX_DMA_CHANNEL_NUM] = {
++	{"PPE", LQ_DMA_RX, 0, LQ_DMA_CH0_INT, 0},
++	{"PPE", LQ_DMA_TX, 0, LQ_DMA_CH1_INT, 0},
++	{"PPE", LQ_DMA_RX, 1, LQ_DMA_CH2_INT, 1},
++	{"PPE", LQ_DMA_TX, 1, LQ_DMA_CH3_INT, 1},
++	{"PPE", LQ_DMA_RX, 2, LQ_DMA_CH4_INT, 2},
++	{"PPE", LQ_DMA_TX, 2, LQ_DMA_CH5_INT, 2},
++	{"PPE", LQ_DMA_RX, 3, LQ_DMA_CH6_INT, 3},
++	{"PPE", LQ_DMA_TX, 3, LQ_DMA_CH7_INT, 3},
++	{"DEU", LQ_DMA_RX, 0, LQ_DMA_CH8_INT, 0},
++	{"DEU", LQ_DMA_TX, 0, LQ_DMA_CH9_INT, 0},
++	{"DEU", LQ_DMA_RX, 1, LQ_DMA_CH10_INT, 1},
++	{"DEU", LQ_DMA_TX, 1, LQ_DMA_CH11_INT, 1},
++	{"SPI", LQ_DMA_RX, 0, LQ_DMA_CH12_INT, 0},
++	{"SPI", LQ_DMA_TX, 0, LQ_DMA_CH13_INT, 0},
++	{"SDIO", LQ_DMA_RX, 0, LQ_DMA_CH14_INT, 0},
++	{"SDIO", LQ_DMA_TX, 0, LQ_DMA_CH15_INT, 0},
++	{"MCTRL0", LQ_DMA_RX, 0, LQ_DMA_CH16_INT, 0},
++	{"MCTRL0", LQ_DMA_TX, 0, LQ_DMA_CH17_INT, 0},
++	{"MCTRL1", LQ_DMA_RX, 1, LQ_DMA_CH18_INT, 1},
++	{"MCTRL1", LQ_DMA_TX, 1, LQ_DMA_CH19_INT, 1}
++};
++
++struct dma_chan_map *chan_map = default_dma_map;
++volatile u32 g_lq_dma_int_status;
++volatile int g_lq_dma_in_process; /* 0=not in process, 1=in process */
++
++void do_dma_tasklet(unsigned long);
++DECLARE_TASKLET(dma_tasklet, do_dma_tasklet, 0);
++
++u8 *common_buffer_alloc(int len, int *byte_offset, void **opt)
++{
++	u8 *buffer = kmalloc(len * sizeof(u8), GFP_KERNEL);
++
++	*byte_offset = 0;
++
++	return buffer;
++}
++
++void common_buffer_free(u8 *dataptr, void *opt)
++{
++	kfree(dataptr);
++}
++
++void enable_ch_irq(struct dma_channel_info *pCh)
++{
++	int chan_no = (int)(pCh - dma_chan);
++	unsigned long flag;
++
++	local_irq_save(flag);
++	lq_w32(chan_no, LQ_DMA_CS);
++	lq_w32(0x4a, LQ_DMA_CIE);
++	lq_w32(lq_r32(LQ_DMA_IRNEN) | (1 << chan_no), LQ_DMA_IRNEN);
++	local_irq_restore(flag);
++	lq_enable_irq(pCh->irq);
++}
++
++void disable_ch_irq(struct dma_channel_info *pCh)
++{
++	unsigned long flag;
++	int chan_no = (int) (pCh - dma_chan);
++
++	local_irq_save(flag);
++	g_lq_dma_int_status &= ~(1 << chan_no);
++	lq_w32(chan_no, LQ_DMA_CS);
++	lq_w32(0, LQ_DMA_CIE);
++	lq_w32(lq_r32(LQ_DMA_IRNEN) & ~(1 << chan_no), LQ_DMA_IRNEN);
++	local_irq_restore(flag);
++	lq_mask_and_ack_irq(pCh->irq);
++}
++
++void open_chan(struct dma_channel_info *pCh)
++{
++	unsigned long flag;
++	int chan_no = (int)(pCh - dma_chan);
++
++	local_irq_save(flag);
++	lq_w32(chan_no, LQ_DMA_CS);
++	lq_w32(lq_r32(LQ_DMA_CCTRL) | 1, LQ_DMA_CCTRL);
++	if (pCh->dir == LQ_DMA_RX)
++		enable_ch_irq(pCh);
++	local_irq_restore(flag);
++}
++
++void close_chan(struct dma_channel_info *pCh)
++{
++	unsigned long flag;
++	int chan_no = (int) (pCh - dma_chan);
++
++	local_irq_save(flag);
++	lq_w32(chan_no, LQ_DMA_CS);
++	lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL);
++	disable_ch_irq(pCh);
++	local_irq_restore(flag);
++}
++
++void reset_chan(struct dma_channel_info *pCh)
++{
++	int chan_no = (int) (pCh - dma_chan);
++
++	lq_w32(chan_no, LQ_DMA_CS);
++	lq_w32(lq_r32(LQ_DMA_CCTRL) | 2, LQ_DMA_CCTRL);
++}
++
++void rx_chan_intr_handler(int chan_no)
++{
++	struct dma_device_info *pDev = (struct dma_device_info *)dma_chan[chan_no].dma_dev;
++	struct dma_channel_info *pCh = &dma_chan[chan_no];
++	struct rx_desc *rx_desc_p;
++	int tmp;
++	unsigned long flag;
++
++	/*handle command complete interrupt */
++	rx_desc_p = (struct rx_desc *)pCh->desc_base + pCh->curr_desc;
++	if (rx_desc_p->status.field.OWN == CPU_OWN
++	    && rx_desc_p->status.field.C
++	    && rx_desc_p->status.field.data_length < 1536){
++		/* Every thing is correct, then we inform the upper layer */
++		pDev->current_rx_chan = pCh->rel_chan_no;
++		if (pDev->intr_handler)
++			pDev->intr_handler(pDev, RCV_INT);
++		pCh->weight--;
++	} else {
++		local_irq_save(flag);
++		tmp = lq_r32(LQ_DMA_CS);
++		lq_w32(chan_no, LQ_DMA_CS);
++		lq_w32(lq_r32(LQ_DMA_CIS) | 0x7e, LQ_DMA_CIS);
++		lq_w32(tmp, LQ_DMA_CS);
++		g_lq_dma_int_status &= ~(1 << chan_no);
++		local_irq_restore(flag);
++		lq_enable_irq(dma_chan[chan_no].irq);
++	}
++}
++
++inline void tx_chan_intr_handler(int chan_no)
++{
++	struct dma_device_info *pDev = (struct dma_device_info *)dma_chan[chan_no].dma_dev;
++	struct dma_channel_info *pCh = &dma_chan[chan_no];
++	int tmp;
++	unsigned long flag;
++
++	local_irq_save(flag);
++	tmp = lq_r32(LQ_DMA_CS);
++	lq_w32(chan_no, LQ_DMA_CS);
++	lq_w32(lq_r32(LQ_DMA_CIS) | 0x7e, LQ_DMA_CIS);
++	lq_w32(tmp, LQ_DMA_CS);
++	g_lq_dma_int_status &= ~(1 << chan_no);
++	local_irq_restore(flag);
++	pDev->current_tx_chan = pCh->rel_chan_no;
++	if (pDev->intr_handler)
++		pDev->intr_handler(pDev, TRANSMIT_CPT_INT);
++}
++
++void do_dma_tasklet(unsigned long unused)
++{
++	int i;
++	int chan_no = 0;
++	int budget = DMA_INT_BUDGET;
++	int weight = 0;
++	unsigned long flag;
++
++	while (g_lq_dma_int_status) {
++		if (budget-- < 0) {
++			tasklet_schedule(&dma_tasklet);
++			return;
++		}
++		chan_no = -1;
++		weight = 0;
++		for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) {
++			if ((g_lq_dma_int_status & (1 << i)) && dma_chan[i].weight > 0) {
++				if (dma_chan[i].weight > weight) {
++					chan_no = i;
++					weight = dma_chan[chan_no].weight;
++				}
++			}
++		}
++
++		if (chan_no >= 0) {
++			if (chan_map[chan_no].dir == LQ_DMA_RX)
++				rx_chan_intr_handler(chan_no);
++			else
++				tx_chan_intr_handler(chan_no);
++		} else {
++			for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
++				dma_chan[i].weight = dma_chan[i].default_weight;
++		}
++	}
++
++	local_irq_save(flag);
++	g_lq_dma_in_process = 0;
++	if (g_lq_dma_int_status) {
++		g_lq_dma_in_process = 1;
++		tasklet_schedule(&dma_tasklet);
++	}
++	local_irq_restore(flag);
++}
++
++irqreturn_t dma_interrupt(int irq, void *dev_id)
++{
++	struct dma_channel_info *pCh;
++	int chan_no = 0;
++	int tmp;
++
++	pCh = (struct dma_channel_info *)dev_id;
++	chan_no = (int)(pCh - dma_chan);
++	if (chan_no < 0 || chan_no > 19)
++		BUG();
++
++	tmp = lq_r32(LQ_DMA_IRNEN);
++	lq_w32(0, LQ_DMA_IRNEN);
++	g_lq_dma_int_status |= 1 << chan_no;
++	lq_w32(tmp, LQ_DMA_IRNEN);
++	lq_mask_and_ack_irq(irq);
++
++	if (!g_lq_dma_in_process) {
++		g_lq_dma_in_process = 1;
++		tasklet_schedule(&dma_tasklet);
++	}
++
++	return IRQ_HANDLED;
++}
++
++struct dma_device_info *dma_device_reserve(char *dev_name)
++{
++	int i;
++
++	for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) {
++		if (strcmp(dev_name, dma_devs[i].device_name) == 0) {
++			if (dma_devs[i].reserved)
++				return NULL;
++			dma_devs[i].reserved = 1;
++			break;
++		}
++	}
++
++	return &dma_devs[i];
++}
++EXPORT_SYMBOL(dma_device_reserve);
++
++void dma_device_release(struct dma_device_info *dev)
++{
++	dev->reserved = 0;
++}
++EXPORT_SYMBOL(dma_device_release);
++
++void dma_device_register(struct dma_device_info *dev)
++{
++	int i, j;
++	int chan_no = 0;
++	u8 *buffer;
++	int byte_offset;
++	unsigned long flag;
++	struct dma_device_info *pDev;
++	struct dma_channel_info *pCh;
++	struct rx_desc *rx_desc_p;
++	struct tx_desc *tx_desc_p;
++
++	for (i = 0; i < dev->max_tx_chan_num; i++) {
++		pCh = dev->tx_chan[i];
++		if (pCh->control == LQ_DMA_CH_ON) {
++			chan_no = (int)(pCh - dma_chan);
++			for (j = 0; j < pCh->desc_len; j++) {
++				tx_desc_p = (struct tx_desc *)pCh->desc_base + j;
++				memset(tx_desc_p, 0, sizeof(struct tx_desc));
++			}
++			local_irq_save(flag);
++			lq_w32(chan_no, LQ_DMA_CS);
++			/* check if the descriptor length is changed */
++			if (lq_r32(LQ_DMA_CDLEN) != pCh->desc_len)
++				lq_w32(pCh->desc_len, LQ_DMA_CDLEN);
++
++			lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL);
++			lq_w32(lq_r32(LQ_DMA_CCTRL) | 2, LQ_DMA_CCTRL);
++			while (lq_r32(LQ_DMA_CCTRL) & 2)
++				;
++			lq_w32(lq_r32(LQ_DMA_IRNEN) | (1 << chan_no), LQ_DMA_IRNEN);
++			lq_w32(0x30100, LQ_DMA_CCTRL); /* reset and enable channel,enable channel later */
++			local_irq_restore(flag);
++		}
++	}
++
++	for (i = 0; i < dev->max_rx_chan_num; i++) {
++		pCh = dev->rx_chan[i];
++		if (pCh->control == LQ_DMA_CH_ON) {
++			chan_no = (int)(pCh - dma_chan);
++
++			for (j = 0; j < pCh->desc_len; j++) {
++				rx_desc_p = (struct rx_desc *)pCh->desc_base + j;
++				pDev = (struct dma_device_info *)(pCh->dma_dev);
++				buffer = pDev->buffer_alloc(pCh->packet_size, &byte_offset, (void *)&(pCh->opt[j]));
++				if (!buffer)
++					break;
++
++				dma_cache_inv((unsigned long) buffer, pCh->packet_size);
++
++				rx_desc_p->Data_Pointer = (u32)CPHYSADDR((u32)buffer);
++				rx_desc_p->status.word = 0;
++				rx_desc_p->status.field.byte_offset = byte_offset;
++				rx_desc_p->status.field.OWN = DMA_OWN;
++				rx_desc_p->status.field.data_length = pCh->packet_size;
++			}
++
++			local_irq_save(flag);
++			lq_w32(chan_no, LQ_DMA_CS);
++			/* check if the descriptor length is changed */
++			if (lq_r32(LQ_DMA_CDLEN) != pCh->desc_len)
++				lq_w32(pCh->desc_len, LQ_DMA_CDLEN);
++			lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL);
++			lq_w32(lq_r32(LQ_DMA_CCTRL) | 2, LQ_DMA_CCTRL);
++			while (lq_r32(LQ_DMA_CCTRL) & 2)
++				;
++			lq_w32(0x0a, LQ_DMA_CIE); /* fix me, should enable all the interrupts here? */
++			lq_w32(lq_r32(LQ_DMA_IRNEN) | (1 << chan_no), LQ_DMA_IRNEN);
++			lq_w32(0x30000, LQ_DMA_CCTRL);
++			local_irq_restore(flag);
++			lq_enable_irq(dma_chan[chan_no].irq);
++		}
++	}
++}
++EXPORT_SYMBOL(dma_device_register);
++
++void dma_device_unregister(struct dma_device_info *dev)
++{
++	int i, j;
++	int chan_no;
++	struct dma_channel_info *pCh;
++	struct rx_desc *rx_desc_p;
++	struct tx_desc *tx_desc_p;
++	unsigned long flag;
++
++	for (i = 0; i < dev->max_tx_chan_num; i++) {
++		pCh = dev->tx_chan[i];
++		if (pCh->control == LQ_DMA_CH_ON) {
++			chan_no = (int)(dev->tx_chan[i] - dma_chan);
++			local_irq_save(flag);
++			lq_w32(chan_no, LQ_DMA_CS);
++			pCh->curr_desc = 0;
++			pCh->prev_desc = 0;
++			pCh->control = LQ_DMA_CH_OFF;
++			lq_w32(0, LQ_DMA_CIE); /* fix me, should disable all the interrupts here? */
++			lq_w32(lq_r32(LQ_DMA_IRNEN) & ~(1 << chan_no), LQ_DMA_IRNEN); /* disable interrupts */
++			lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL);
++			while (lq_r32(LQ_DMA_CCTRL) & 1)
++				;
++			local_irq_restore(flag);
++
++			for (j = 0; j < pCh->desc_len; j++) {
++				tx_desc_p = (struct tx_desc *)pCh->desc_base + j;
++				if ((tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C)
++						|| (tx_desc_p->status.field.OWN == DMA_OWN && tx_desc_p->status.field.data_length > 0)) {
++					dev->buffer_free((u8 *) __va(tx_desc_p->Data_Pointer), (void *)pCh->opt[j]);
++				}
++				tx_desc_p->status.field.OWN = CPU_OWN;
++				memset(tx_desc_p, 0, sizeof(struct tx_desc));
++			}
++			/* TODO should free buffer that is not transferred by dma */
++		}
++	}
++
++	for (i = 0; i < dev->max_rx_chan_num; i++) {
++		pCh = dev->rx_chan[i];
++		chan_no = (int)(dev->rx_chan[i] - dma_chan);
++		lq_disable_irq(pCh->irq);
++
++		local_irq_save(flag);
++		g_lq_dma_int_status &= ~(1 << chan_no);
++		pCh->curr_desc = 0;
++		pCh->prev_desc = 0;
++		pCh->control = LQ_DMA_CH_OFF;
++
++		lq_w32(chan_no, LQ_DMA_CS);
++		lq_w32(0, LQ_DMA_CIE); /* fix me, should disable all the interrupts here? */
++		lq_w32(lq_r32(LQ_DMA_IRNEN) & ~(1 << chan_no), LQ_DMA_IRNEN); /* disable interrupts */
++		lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL);
++		while (lq_r32(LQ_DMA_CCTRL) & 1)
++			;
++
++		local_irq_restore(flag);
++		for (j = 0; j < pCh->desc_len; j++) {
++			rx_desc_p = (struct rx_desc *) pCh->desc_base + j;
++			if ((rx_desc_p->status.field.OWN == CPU_OWN
++			     && rx_desc_p->status.field.C)
++			    || (rx_desc_p->status.field.OWN == DMA_OWN
++				&& rx_desc_p->status.field.data_length > 0)) {
++				dev->buffer_free((u8 *)
++						 __va(rx_desc_p->Data_Pointer),
++						 (void *) pCh->opt[j]);
++			}
++		}
++	}
++}
++EXPORT_SYMBOL(dma_device_unregister);
++
++int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt)
++{
++	u8 *buf;
++	int len;
++	int byte_offset = 0;
++	void *p = NULL;
++	struct dma_channel_info *pCh = dma_dev->rx_chan[dma_dev->current_rx_chan];
++	struct rx_desc *rx_desc_p;
++
++	/* get the rx data first */
++	rx_desc_p = (struct rx_desc *) pCh->desc_base + pCh->curr_desc;
++	if (!(rx_desc_p->status.field.OWN == CPU_OWN && rx_desc_p->status.field.C))
++		return 0;
++
++	buf = (u8 *) __va(rx_desc_p->Data_Pointer);
++	*(u32 *)dataptr = (u32)buf;
++	len = rx_desc_p->status.field.data_length;
++
++	if (opt)
++		*(int *)opt = (int)pCh->opt[pCh->curr_desc];
++
++	/* replace with a new allocated buffer */
++	buf = dma_dev->buffer_alloc(pCh->packet_size, &byte_offset, &p);
++
++	if (buf) {
++		dma_cache_inv((unsigned long) buf, pCh->packet_size);
++		pCh->opt[pCh->curr_desc] = p;
++		wmb();
++
++		rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf);
++		rx_desc_p->status.word = (DMA_OWN << 31) | ((byte_offset) << 23) | pCh->packet_size;
++		wmb();
++	} else {
++		*(u32 *) dataptr = 0;
++		if (opt)
++			*(int *) opt = 0;
++		len = 0;
++	}
++
++	/* increase the curr_desc pointer */
++	pCh->curr_desc++;
++	if (pCh->curr_desc == pCh->desc_len)
++		pCh->curr_desc = 0;
++
++	return len;
++}
++EXPORT_SYMBOL(dma_device_read);
++
++int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr, int len, void *opt)
++{
++	unsigned long flag;
++	u32 tmp, byte_offset;
++	struct dma_channel_info *pCh;
++	int chan_no;
++	struct tx_desc *tx_desc_p;
++	local_irq_save(flag);
++
++	pCh = dma_dev->tx_chan[dma_dev->current_tx_chan];
++	chan_no = (int)(pCh - (struct dma_channel_info *) dma_chan);
++
++	tx_desc_p = (struct tx_desc *)pCh->desc_base + pCh->prev_desc;
++	while (tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C) {
++		dma_dev->buffer_free((u8 *) __va(tx_desc_p->Data_Pointer), pCh->opt[pCh->prev_desc]);
++		memset(tx_desc_p, 0, sizeof(struct tx_desc));
++		pCh->prev_desc = (pCh->prev_desc + 1) % (pCh->desc_len);
++		tx_desc_p = (struct tx_desc *)pCh->desc_base + pCh->prev_desc;
++	}
++	tx_desc_p = (struct tx_desc *)pCh->desc_base + pCh->curr_desc;
++	/* Check whether this descriptor is available */
++	if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C) {
++		/* if not, the tell the upper layer device */
++		dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
++		local_irq_restore(flag);
++		printk(KERN_INFO "%s %d: failed to write!\n", __func__, __LINE__);
++
++		return 0;
++	}
++	pCh->opt[pCh->curr_desc] = opt;
++	/* byte offset----to adjust the starting address of the data buffer, should be multiple of the burst length. */
++	byte_offset = ((u32) CPHYSADDR((u32) dataptr)) % ((dma_dev->tx_burst_len) * 4);
++	dma_cache_wback((unsigned long) dataptr, len);
++	wmb();
++	tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset;
++	wmb();
++	tx_desc_p->status.word = (DMA_OWN << 31) | DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | ((byte_offset) << 23) | len;
++	wmb();
++
++	pCh->curr_desc++;
++	if (pCh->curr_desc == pCh->desc_len)
++		pCh->curr_desc = 0;
++
++	/*Check whether this descriptor is available */
++	tx_desc_p = (struct tx_desc *) pCh->desc_base + pCh->curr_desc;
++	if (tx_desc_p->status.field.OWN == DMA_OWN) {
++		/*if not , the tell the upper layer device */
++		dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
++	}
++
++	lq_w32(chan_no, LQ_DMA_CS);
++	tmp = lq_r32(LQ_DMA_CCTRL);
++
++	if (!(tmp & 1))
++		pCh->open(pCh);
++
++	local_irq_restore(flag);
++
++	return len;
++}
++EXPORT_SYMBOL(dma_device_write);
++
++int map_dma_chan(struct dma_chan_map *map)
++{
++	int i, j;
++	int result;
++
++	for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
++		strcpy(dma_devs[i].device_name, global_device_name[i]);
++
++	for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) {
++		dma_chan[i].irq = map[i].irq;
++		result = request_irq(dma_chan[i].irq, dma_interrupt, IRQF_DISABLED, map[i].dev_name, (void *)&dma_chan[i]);
++		if (result) {
++			printk(KERN_WARNING "error, cannot get dma_irq!\n");
++			free_irq(dma_chan[i].irq, (void *) &dma_interrupt);
++
++			return -EFAULT;
++		}
++	}
++
++	for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) {
++		dma_devs[i].num_tx_chan = 0;	/*set default tx channel number to be one */
++		dma_devs[i].num_rx_chan = 0;	/*set default rx channel number to be one */
++		dma_devs[i].max_rx_chan_num = 0;
++		dma_devs[i].max_tx_chan_num = 0;
++		dma_devs[i].buffer_alloc = &common_buffer_alloc;
++		dma_devs[i].buffer_free = &common_buffer_free;
++		dma_devs[i].intr_handler = NULL;
++		dma_devs[i].tx_burst_len = 4;
++		dma_devs[i].rx_burst_len = 4;
++		if (i == 0) {
++			lq_w32(0, LQ_DMA_PS);
++			lq_w32(lq_r32(LQ_DMA_PCTRL) | ((0xf << 8) | (1 << 6)), LQ_DMA_PCTRL);	/*enable dma drop */
++		}
++
++		if (i == 1) {
++			lq_w32(1, LQ_DMA_PS);
++			lq_w32(0x14, LQ_DMA_PCTRL);	/*deu port setting */
++		}
++
++		for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++) {
++			dma_chan[j].byte_offset = 0;
++			dma_chan[j].open = &open_chan;
++			dma_chan[j].close = &close_chan;
++			dma_chan[j].reset = &reset_chan;
++			dma_chan[j].enable_irq = &enable_ch_irq;
++			dma_chan[j].disable_irq = &disable_ch_irq;
++			dma_chan[j].rel_chan_no = map[j].rel_chan_no;
++			dma_chan[j].control = LQ_DMA_CH_OFF;
++			dma_chan[j].default_weight = LQ_DMA_CH_DEFAULT_WEIGHT;
++			dma_chan[j].weight = dma_chan[j].default_weight;
++			dma_chan[j].curr_desc = 0;
++			dma_chan[j].prev_desc = 0;
++		}
++
++		for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++) {
++			if (strcmp(dma_devs[i].device_name, map[j].dev_name) == 0) {
++				if (map[j].dir == LQ_DMA_RX) {
++					dma_chan[j].dir = LQ_DMA_RX;
++					dma_devs[i].max_rx_chan_num++;
++					dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1] = &dma_chan[j];
++					dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1]->pri = map[j].pri;
++					dma_chan[j].dma_dev = (void *)&dma_devs[i];
++				} else if (map[j].dir == LQ_DMA_TX) {
++					/*TX direction */
++					dma_chan[j].dir = LQ_DMA_TX;
++					dma_devs[i].max_tx_chan_num++;
++					dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1] = &dma_chan[j];
++					dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1]->pri = map[j].pri;
++					dma_chan[j].dma_dev = (void *)&dma_devs[i];
++				} else {
++					printk(KERN_WARNING "WRONG DMA MAP!\n");
++				}
++			}
++		}
++	}
++
++	return 0;
++}
++
++void dma_chip_init(void)
++{
++	int i;
++
++	/* enable DMA from PMU */
++	lq_pmu_enable(PMU_DMA);
++
++	/* reset DMA */
++	lq_w32(lq_r32(LQ_DMA_CTRL) | 1, LQ_DMA_CTRL);
++
++	/* disable all interrupts */
++	lq_w32(0, LQ_DMA_IRNEN);
++
++	for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) {
++		lq_w32(i, LQ_DMA_CS);
++		lq_w32(0x2, LQ_DMA_CCTRL);
++		lq_w32(0x80000040, LQ_DMA_CPOLL);
++		lq_w32(lq_r32(LQ_DMA_CCTRL) & ~0x1, LQ_DMA_CCTRL);
++	}
++}
++
++int lq_dma_init(void)
++{
++	int i;
++
++	dma_chip_init();
++
++	if (map_dma_chan(default_dma_map))
++		BUG();
++
++	g_desc_list = (u64 *)KSEG1ADDR(__get_free_page(GFP_DMA));
++
++	if (g_desc_list == NULL) {
++		printk(KERN_WARNING "no memory for desriptor\n");
++		return -ENOMEM;
++	}
++
++	memset(g_desc_list, 0, PAGE_SIZE);
++
++	for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) {
++		dma_chan[i].desc_base = (u32)g_desc_list + i * LQ_DMA_DESCRIPTOR_OFFSET * 8;
++		dma_chan[i].curr_desc = 0;
++		dma_chan[i].desc_len = LQ_DMA_DESCRIPTOR_OFFSET;
++
++		lq_w32(i, LQ_DMA_CS);
++		lq_w32((u32)CPHYSADDR(dma_chan[i].desc_base), LQ_DMA_CDBA);
++		lq_w32(dma_chan[i].desc_len, LQ_DMA_CDLEN);
++	}
++	return 0;
++}
++
++arch_initcall(lq_dma_init);
++
++void dma_cleanup(void)
++{
++	int i;
++
++	free_page(KSEG0ADDR((unsigned long) g_desc_list));
++	for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
++		free_irq(dma_chan[i].irq, (void  *)&dma_interrupt);
++}
++
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/arch/mips/lantiq/xway/pmu.c
+@@ -0,0 +1,36 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++
++#include <xway.h>
++
++#define LQ_PMU_PWDCR        ((u32 *)(LQ_PMU_BASE_ADDR + 0x001C))
++#define LQ_PMU_PWDSR        ((u32 *)(LQ_PMU_BASE_ADDR + 0x0020))
++
++void
++lq_pmu_enable(unsigned int module)
++{
++	int err = 1000000;
++
++	lq_w32(lq_r32(LQ_PMU_PWDCR) & ~module, LQ_PMU_PWDCR);
++	while (--err && (lq_r32(LQ_PMU_PWDSR) & module));
++
++	if (!err)
++		panic("activating PMU module failed!");
++}
++EXPORT_SYMBOL(lq_pmu_enable);
++
++void
++lq_pmu_disable(unsigned int module)
++{
++	lq_w32(lq_r32(LQ_PMU_PWDCR) | module, LQ_PMU_PWDCR);
++}
++EXPORT_SYMBOL(lq_pmu_disable);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/timer.c
+@@ -0,0 +1,828 @@
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <linux/uaccess.h>
++#include <linux/unistd.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++#include <asm/div64.h>
++
++#include <xway.h>
++#include <xway_irq.h>
++#include <lantiq_timer.h>
++
++#define MAX_NUM_OF_32BIT_TIMER_BLOCKS	6
++
++#ifdef TIMER1A
++#define FIRST_TIMER			TIMER1A
++#else
++#define FIRST_TIMER			2
++#endif
++
++/*
++ *  GPTC divider is set or not.
++ */
++#define GPTU_CLC_RMC_IS_SET		0
++
++/*
++ *  Timer Interrupt (IRQ)
++ */
++/*  Must be adjusted when ICU driver is available */
++#define TIMER_INTERRUPT			(INT_NUM_IM3_IRL0 + 22)
++
++/*
++ *  Bits Operation
++ */
++#define GET_BITS(x, msb, lsb)		\
++	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++#define SET_BITS(x, msb, lsb, value)	\
++	(((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
++	(((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
++
++/*
++ *  GPTU Register Mapping
++ */
++#define LQ_GPTU			(KSEG1 + 0x1E100A00)
++#define LQ_GPTU_CLC		((volatile u32 *)(LQ_GPTU + 0x0000))
++#define LQ_GPTU_ID			((volatile u32 *)(LQ_GPTU + 0x0008))
++#define LQ_GPTU_CON(n, X)		((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_RUN(n, X)		((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_RELOAD(n, X)	((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_COUNT(n, X)	((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_IRNEN		((volatile u32 *)(LQ_GPTU + 0x00F4))
++#define LQ_GPTU_IRNICR		((volatile u32 *)(LQ_GPTU + 0x00F8))
++#define LQ_GPTU_IRNCR		((volatile u32 *)(LQ_GPTU + 0x00FC))
++
++/*
++ *  Clock Control Register
++ */
++#define GPTU_CLC_SMC			GET_BITS(*LQ_GPTU_CLC, 23, 16)
++#define GPTU_CLC_RMC			GET_BITS(*LQ_GPTU_CLC, 15, 8)
++#define GPTU_CLC_FSOE			(*LQ_GPTU_CLC & (1 << 5))
++#define GPTU_CLC_EDIS			(*LQ_GPTU_CLC & (1 << 3))
++#define GPTU_CLC_SPEN			(*LQ_GPTU_CLC & (1 << 2))
++#define GPTU_CLC_DISS			(*LQ_GPTU_CLC & (1 << 1))
++#define GPTU_CLC_DISR			(*LQ_GPTU_CLC & (1 << 0))
++
++#define GPTU_CLC_SMC_SET(value)		SET_BITS(0, 23, 16, (value))
++#define GPTU_CLC_RMC_SET(value)		SET_BITS(0, 15, 8, (value))
++#define GPTU_CLC_FSOE_SET(value)	((value) ? (1 << 5) : 0)
++#define GPTU_CLC_SBWE_SET(value)	((value) ? (1 << 4) : 0)
++#define GPTU_CLC_EDIS_SET(value)	((value) ? (1 << 3) : 0)
++#define GPTU_CLC_SPEN_SET(value)	((value) ? (1 << 2) : 0)
++#define GPTU_CLC_DISR_SET(value)	((value) ? (1 << 0) : 0)
++
++/*
++ *  ID Register
++ */
++#define GPTU_ID_ID			GET_BITS(*LQ_GPTU_ID, 15, 8)
++#define GPTU_ID_CFG			GET_BITS(*LQ_GPTU_ID, 7, 5)
++#define GPTU_ID_REV			GET_BITS(*LQ_GPTU_ID, 4, 0)
++
++/*
++ *  Control Register of Timer/Counter nX
++ *    n is the index of block (1 based index)
++ *    X is either A or B
++ */
++#define GPTU_CON_SRC_EG(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 10))
++#define GPTU_CON_SRC_EXT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 9))
++#define GPTU_CON_SYNC(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 8))
++#define GPTU_CON_EDGE(n, X)		GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
++#define GPTU_CON_INV(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 5))
++#define GPTU_CON_EXT(n, X)		(*LQ_GPTU_CON(n, A) & (1 << 4))	/* Timer/Counter B does not have this bit */
++#define GPTU_CON_STP(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 3))
++#define GPTU_CON_CNT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 2))
++#define GPTU_CON_DIR(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 1))
++#define GPTU_CON_EN(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 0))
++
++#define GPTU_CON_SRC_EG_SET(value)	((value) ? 0 : (1 << 10))
++#define GPTU_CON_SRC_EXT_SET(value)	((value) ? (1 << 9) : 0)
++#define GPTU_CON_SYNC_SET(value)	((value) ? (1 << 8) : 0)
++#define GPTU_CON_EDGE_SET(value)	SET_BITS(0, 7, 6, (value))
++#define GPTU_CON_INV_SET(value)		((value) ? (1 << 5) : 0)
++#define GPTU_CON_EXT_SET(value)		((value) ? (1 << 4) : 0)
++#define GPTU_CON_STP_SET(value)		((value) ? (1 << 3) : 0)
++#define GPTU_CON_CNT_SET(value)		((value) ? (1 << 2) : 0)
++#define GPTU_CON_DIR_SET(value)		((value) ? (1 << 1) : 0)
++
++#define GPTU_RUN_RL_SET(value)		((value) ? (1 << 2) : 0)
++#define GPTU_RUN_CEN_SET(value)		((value) ? (1 << 1) : 0)
++#define GPTU_RUN_SEN_SET(value)		((value) ? (1 << 0) : 0)
++
++#define GPTU_IRNEN_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++#define GPTU_IRNCR_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++
++#define TIMER_FLAG_MASK_SIZE(x)		(x & 0x0001)
++#define TIMER_FLAG_MASK_TYPE(x)		(x & 0x0002)
++#define TIMER_FLAG_MASK_STOP(x)		(x & 0x0004)
++#define TIMER_FLAG_MASK_DIR(x)		(x & 0x0008)
++#define TIMER_FLAG_NONE_EDGE		0x0000
++#define TIMER_FLAG_MASK_EDGE(x)		(x & 0x0030)
++#define TIMER_FLAG_REAL			0x0000
++#define TIMER_FLAG_INVERT		0x0040
++#define TIMER_FLAG_MASK_INVERT(x)	(x & 0x0040)
++#define TIMER_FLAG_MASK_TRIGGER(x)	(x & 0x0070)
++#define TIMER_FLAG_MASK_SYNC(x)		(x & 0x0080)
++#define TIMER_FLAG_CALLBACK_IN_HB	0x0200
++#define TIMER_FLAG_MASK_HANDLE(x)	(x & 0x0300)
++#define TIMER_FLAG_MASK_SRC(x)		(x & 0x1000)
++
++struct timer_dev_timer {
++	unsigned int f_irq_on;
++	unsigned int irq;
++	unsigned int flag;
++	unsigned long arg1;
++	unsigned long arg2;
++};
++
++struct timer_dev {
++	struct mutex gptu_mutex;
++	unsigned int number_of_timers;
++	unsigned int occupation;
++	unsigned int f_gptu_on;
++	struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
++};
++
++static int gptu_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
++static int gptu_open(struct inode *, struct file *);
++static int gptu_release(struct inode *, struct file *);
++
++static struct file_operations gptu_fops = {
++	.owner = THIS_MODULE,
++	.ioctl = gptu_ioctl,
++	.open = gptu_open,
++	.release = gptu_release
++};
++
++static struct miscdevice gptu_miscdev = {
++	.minor = MISC_DYNAMIC_MINOR,
++	.name = "gptu",
++	.fops = &gptu_fops,
++};
++
++static struct timer_dev timer_dev;
++
++static irqreturn_t timer_irq_handler(int irq, void *p)
++{
++	unsigned int timer;
++	unsigned int flag;
++	struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
++
++	timer = irq - TIMER_INTERRUPT;
++	if (timer < timer_dev.number_of_timers
++		&& dev_timer == &timer_dev.timer[timer]) {
++		/*  Clear interrupt.    */
++		lq_w32(1 << timer, LQ_GPTU_IRNCR);
++
++		/*  Call user hanler or signal. */
++		flag = dev_timer->flag;
++		if (!(timer & 0x01)
++			|| TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++			/* 16-bit timer or timer A of 32-bit timer  */
++			switch (TIMER_FLAG_MASK_HANDLE(flag)) {
++			case TIMER_FLAG_CALLBACK_IN_IRQ:
++			case TIMER_FLAG_CALLBACK_IN_HB:
++				if (dev_timer->arg1)
++					(*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
++				break;
++			case TIMER_FLAG_SIGNAL:
++				send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
++				break;
++			}
++		}
++	}
++	return IRQ_HANDLED;
++}
++
++static inline void lq_enable_gptu(void)
++{
++	lq_pmu_enable(PMU_GPT);
++
++	/*  Set divider as 1, disable write protection for SPEN, enable module. */
++	*LQ_GPTU_CLC =
++		GPTU_CLC_SMC_SET(0x00) |
++		GPTU_CLC_RMC_SET(0x01) |
++		GPTU_CLC_FSOE_SET(0) |
++		GPTU_CLC_SBWE_SET(1) |
++		GPTU_CLC_EDIS_SET(0) |
++		GPTU_CLC_SPEN_SET(0) |
++		GPTU_CLC_DISR_SET(0);
++}
++
++static inline void lq_disable_gptu(void)
++{
++	lq_w32(0x00, LQ_GPTU_IRNEN);
++	lq_w32(0xfff, LQ_GPTU_IRNCR);
++
++	/*  Set divider as 0, enable write protection for SPEN, disable module. */
++	*LQ_GPTU_CLC =
++		GPTU_CLC_SMC_SET(0x00) |
++		GPTU_CLC_RMC_SET(0x00) |
++		GPTU_CLC_FSOE_SET(0) |
++		GPTU_CLC_SBWE_SET(0) |
++		GPTU_CLC_EDIS_SET(0) |
++		GPTU_CLC_SPEN_SET(0) |
++		GPTU_CLC_DISR_SET(1);
++
++	lq_pmu_disable(PMU_GPT);
++}
++
++int lq_request_timer(unsigned int timer, unsigned int flag,
++	unsigned long value, unsigned long arg1, unsigned long arg2)
++{
++	int ret = 0;
++	unsigned int con_reg, irnen_reg;
++	int n, X;
++
++	if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
++		timer, flag, value);
++
++	if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
++		value &= 0xFFFF;
++	else
++		timer &= ~0x01;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	/*
++	 *  Allocate timer.
++	 */
++	if (timer < FIRST_TIMER) {
++		unsigned int mask;
++		unsigned int shift;
++		/* This takes care of TIMER1B which is the only choice for Voice TAPI system */
++		unsigned int offset = TIMER2A;
++
++		/*
++		 *  Pick up a free timer.
++		 */
++		if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++			mask = 1 << offset;
++			shift = 1;
++		} else {
++			mask = 3 << offset;
++			shift = 2;
++		}
++		for (timer = offset;
++		     timer < offset + timer_dev.number_of_timers;
++		     timer += shift, mask <<= shift)
++			if (!(timer_dev.occupation & mask)) {
++				timer_dev.occupation |= mask;
++				break;
++			}
++		if (timer >= offset + timer_dev.number_of_timers) {
++			printk("failed![%d]\n", __LINE__);
++			mutex_unlock(&timer_dev.gptu_mutex);
++			return -EINVAL;
++		} else
++			ret = timer;
++	} else {
++		register unsigned int mask;
++
++		/*
++		 *  Check if the requested timer is free.
++		 */
++		mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++		if ((timer_dev.occupation & mask)) {
++			printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
++				__LINE__, mask, timer_dev.occupation);
++			mutex_unlock(&timer_dev.gptu_mutex);
++			return -EBUSY;
++		} else {
++			timer_dev.occupation |= mask;
++			ret = 0;
++		}
++	}
++
++	/*
++	 *  Prepare control register value.
++	 */
++	switch (TIMER_FLAG_MASK_EDGE(flag)) {
++	default:
++	case TIMER_FLAG_NONE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x00);
++		break;
++	case TIMER_FLAG_RISE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x01);
++		break;
++	case TIMER_FLAG_FALL_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x02);
++		break;
++	case TIMER_FLAG_ANY_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x03);
++		break;
++	}
++	if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
++		con_reg |=
++			TIMER_FLAG_MASK_SRC(flag) ==
++			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
++			GPTU_CON_SRC_EXT_SET(0);
++	else
++		con_reg |=
++			TIMER_FLAG_MASK_SRC(flag) ==
++			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
++			GPTU_CON_SRC_EG_SET(0);
++	con_reg |=
++		TIMER_FLAG_MASK_SYNC(flag) ==
++		TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
++		GPTU_CON_SYNC_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_INVERT(flag) ==
++		TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_SIZE(flag) ==
++		TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
++		GPTU_CON_EXT_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_STOP(flag) ==
++		TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++	con_reg |=
++		TIMER_FLAG_MASK_TYPE(flag) ==
++		TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
++		GPTU_CON_CNT_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_DIR(flag) ==
++		TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++	/*
++	 *  Fill up running data.
++	 */
++	timer_dev.timer[timer - FIRST_TIMER].flag = flag;
++	timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
++	timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
++
++	/*
++	 *  Enable GPTU module.
++	 */
++	if (!timer_dev.f_gptu_on) {
++		lq_enable_gptu();
++		timer_dev.f_gptu_on = 1;
++	}
++
++	/*
++	 *  Enable IRQ.
++	 */
++	if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
++		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
++			timer_dev.timer[timer - FIRST_TIMER].arg1 =
++				(unsigned long) find_task_by_vpid((int) arg1);
++
++		irnen_reg = 1 << (timer - FIRST_TIMER);
++
++		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
++		    || (TIMER_FLAG_MASK_HANDLE(flag) ==
++			TIMER_FLAG_CALLBACK_IN_IRQ
++			&& timer_dev.timer[timer - FIRST_TIMER].arg1)) {
++			enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++			timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
++		}
++	} else
++		irnen_reg = 0;
++
++	/*
++	 *  Write config register, reload value and enable interrupt.
++	 */
++	n = timer >> 1;
++	X = timer & 0x01;
++	*LQ_GPTU_CON(n, X) = con_reg;
++	*LQ_GPTU_RELOAD(n, X) = value;
++	/* printk("reload value = %d\n", (u32)value); */
++	*LQ_GPTU_IRNEN |= irnen_reg;
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++	printk("successful!\n");
++	return ret;
++}
++EXPORT_SYMBOL(lq_request_timer);
++
++int lq_free_timer(unsigned int timer)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	if (GPTU_CON_EN(n, X))
++		*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++	*LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
++	*LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
++
++	if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
++		disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++		timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
++	}
++
++	timer_dev.occupation &= ~mask;
++	if (!timer_dev.occupation && timer_dev.f_gptu_on) {
++		lq_disable_gptu();
++		timer_dev.f_gptu_on = 0;
++	}
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_free_timer);
++
++int lq_start_timer(unsigned int timer, int is_resume)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) ==
++	TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_start_timer);
++
++int lq_stop_timer(unsigned int timer)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER
++	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_stop_timer);
++
++int lq_reset_counter_flags(u32 timer, u32 flags)
++{
++	unsigned int oflag;
++	unsigned int mask, con_reg;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	switch (TIMER_FLAG_MASK_EDGE(flags)) {
++	default:
++	case TIMER_FLAG_NONE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x00);
++		break;
++	case TIMER_FLAG_RISE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x01);
++		break;
++	case TIMER_FLAG_FALL_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x02);
++		break;
++	case TIMER_FLAG_ANY_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x03);
++		break;
++	}
++	if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
++		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
++	else
++		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
++	con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
++	con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++	con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
++	con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++	con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
++	con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++	timer_dev.timer[timer - FIRST_TIMER].flag = flags;
++	if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
++		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_CON(n, X) = con_reg;
++	smp_wmb();
++	printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X));
++	mutex_unlock(&timer_dev.gptu_mutex);
++	return 0;
++}
++EXPORT_SYMBOL(lq_reset_counter_flags);
++
++int lq_get_count_value(unsigned int timer, unsigned long *value)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER
++	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*value = *LQ_GPTU_COUNT(n, X);
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_get_count_value);
++
++u32 lq_cal_divider(unsigned long freq)
++{
++	u64 module_freq, fpi = lq_get_fpi_bus_clock(2);
++	u32 clock_divider = 1;
++	module_freq = fpi * 1000;
++	do_div(module_freq, clock_divider * freq);
++	return module_freq;
++}
++EXPORT_SYMBOL(lq_cal_divider);
++
++int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
++	int is_ext_src, unsigned int handle_flag, unsigned long arg1,
++	unsigned long arg2)
++{
++	unsigned long divider;
++	unsigned int flag;
++
++	divider = lq_cal_divider(freq);
++	if (divider == 0)
++		return -EINVAL;
++	flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
++		| (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
++		| (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
++		| TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
++		| TIMER_FLAG_MASK_HANDLE(handle_flag);
++
++	printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
++		timer, freq, divider);
++	return lq_request_timer(timer, flag, divider, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_timer);
++
++int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
++	unsigned long arg1, unsigned long arg2)
++{
++	printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
++	return lq_request_timer(timer, flag, reload, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_counter);
++
++static int gptu_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
++	unsigned long arg)
++{
++	int ret;
++	struct gptu_ioctl_param param;
++
++	if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
++		return -EFAULT;
++	copy_from_user(&param, (void *) arg, sizeof(param));
++
++	if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
++	       || GPTU_SET_COUNTER) && param.timer < 2)
++	     || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
++	    && !access_ok(VERIFY_WRITE, arg,
++			   sizeof(struct gptu_ioctl_param)))
++		return -EFAULT;
++
++	switch (cmd) {
++	case GPTU_REQUEST_TIMER:
++		ret = lq_request_timer(param.timer, param.flag, param.value,
++				     (unsigned long) param.pid,
++				     (unsigned long) param.sig);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	case GPTU_FREE_TIMER:
++		ret = lq_free_timer(param.timer);
++		break;
++	case GPTU_START_TIMER:
++		ret = lq_start_timer(param.timer, param.flag);
++		break;
++	case GPTU_STOP_TIMER:
++		ret = lq_stop_timer(param.timer);
++		break;
++	case GPTU_GET_COUNT_VALUE:
++		ret = lq_get_count_value(param.timer, &param.value);
++		if (!ret)
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      value, &param.value,
++				      sizeof(param.value));
++		break;
++	case GPTU_CALCULATE_DIVIDER:
++		param.value = lq_cal_divider(param.value);
++		if (param.value == 0)
++			ret = -EINVAL;
++		else {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      value, &param.value,
++				      sizeof(param.value));
++			ret = 0;
++		}
++		break;
++	case GPTU_SET_TIMER:
++		ret = lq_set_timer(param.timer, param.value,
++				 TIMER_FLAG_MASK_STOP(param.flag) !=
++				 TIMER_FLAG_ONCE ? 1 : 0,
++				 TIMER_FLAG_MASK_SRC(param.flag) ==
++				 TIMER_FLAG_EXT_SRC ? 1 : 0,
++				 TIMER_FLAG_MASK_HANDLE(param.flag) ==
++				 TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
++				 TIMER_FLAG_NO_HANDLE,
++				 (unsigned long) param.pid,
++				 (unsigned long) param.sig);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	case GPTU_SET_COUNTER:
++		lq_set_counter(param.timer, param.flag, param.value, 0, 0);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	default:
++		ret = -ENOTTY;
++	}
++
++	return ret;
++}
++
++static int gptu_open(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++static int gptu_release(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++int __init lq_gptu_init(void)
++{
++	int ret;
++	unsigned int i;
++
++	lq_w32(0, LQ_GPTU_IRNEN);
++	lq_w32(0xfff, LQ_GPTU_IRNCR);
++
++	memset(&timer_dev, 0, sizeof(timer_dev));
++	mutex_init(&timer_dev.gptu_mutex);
++
++	lq_enable_gptu();
++	timer_dev.number_of_timers = GPTU_ID_CFG * 2;
++	lq_disable_gptu();
++	if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
++		timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
++	printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
++
++	ret = misc_register(&gptu_miscdev);
++	if (ret) {
++		printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
++		return ret;
++	} else {
++		printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
++	}
++
++	for (i = 0; i < timer_dev.number_of_timers; i++) {
++		ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
++		if (ret) {
++			for (; i >= 0; i--)
++				free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
++			misc_deregister(&gptu_miscdev);
++			printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
++			return ret;
++		} else {
++			timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
++			disable_irq(timer_dev.timer[i].irq);
++			printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
++		}
++	}
++
++	return 0;
++}
++
++void __exit lq_gptu_exit(void)
++{
++	unsigned int i;
++
++	for (i = 0; i < timer_dev.number_of_timers; i++) {
++		if (timer_dev.timer[i].f_irq_on)
++			disable_irq(timer_dev.timer[i].irq);
++		free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
++	}
++	lq_disable_gptu();
++	misc_deregister(&gptu_miscdev);
++}
++
++module_init(lq_gptu_init);
++module_exit(lq_gptu_exit);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/timer.h
+@@ -0,0 +1,155 @@
++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++
++
++/******************************************************************************
++       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
++
++                               No Warranty
++   Because the program is licensed free of charge, there is no warranty for
++   the program, to the extent permitted by applicable law.  Except when
++   otherwise stated in writing the copyright holders and/or other parties
++   provide the program "as is" without warranty of any kind, either
++   expressed or implied, including, but not limited to, the implied
++   warranties of merchantability and fitness for a particular purpose. The
++   entire risk as to the quality and performance of the program is with
++   you.  should the program prove defective, you assume the cost of all
++   necessary servicing, repair or correction.
++
++   In no event unless required by applicable law or agreed to in writing
++   will any copyright holder, or any other party who may modify and/or
++   redistribute the program as permitted above, be liable to you for
++   damages, including any general, special, incidental or consequential
++   damages arising out of the use or inability to use the program
++   (including but not limited to loss of data or data being rendered
++   inaccurate or losses sustained by you or third parties or a failure of
++   the program to operate with any other programs), even if such holder or
++   other party has been advised of the possibility of such damages.
++******************************************************************************/
++
++
++/*
++ * ####################################
++ *              Definition
++ * ####################################
++ */
++
++/*
++ *  Available Timer/Counter Index
++ */
++#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
++#define TIMER_ANY                       0x00
++#define TIMER1A                         TIMER(1, 0)
++#define TIMER1B                         TIMER(1, 1)
++#define TIMER2A                         TIMER(2, 0)
++#define TIMER2B                         TIMER(2, 1)
++#define TIMER3A                         TIMER(3, 0)
++#define TIMER3B                         TIMER(3, 1)
++
++/*
++ *  Flag of Timer/Counter
++ *  These flags specify the way in which timer is configured.
++ */
++/*  Bit size of timer/counter.                      */
++#define TIMER_FLAG_16BIT                0x0000
++#define TIMER_FLAG_32BIT                0x0001
++/*  Switch between timer and counter.               */
++#define TIMER_FLAG_TIMER                0x0000
++#define TIMER_FLAG_COUNTER              0x0002
++/*  Stop or continue when overflowing/underflowing. */
++#define TIMER_FLAG_ONCE                 0x0000
++#define TIMER_FLAG_CYCLIC               0x0004
++/*  Count up or counter down.                       */
++#define TIMER_FLAG_UP                   0x0000
++#define TIMER_FLAG_DOWN                 0x0008
++/*  Count on specific level or edge.                */
++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
++#define TIMER_FLAG_RISE_EDGE            0x0010
++#define TIMER_FLAG_FALL_EDGE            0x0020
++#define TIMER_FLAG_ANY_EDGE             0x0030
++/*  Signal is syncronous to module clock or not.    */
++#define TIMER_FLAG_UNSYNC               0x0000
++#define TIMER_FLAG_SYNC                 0x0080
++/*  Different interrupt handle type.                */
++#define TIMER_FLAG_NO_HANDLE            0x0000
++#if defined(__KERNEL__)
++    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
++#endif  //  defined(__KERNEL__)
++#define TIMER_FLAG_SIGNAL               0x0300
++/*  Internal clock source or external clock source  */
++#define TIMER_FLAG_INT_SRC              0x0000
++#define TIMER_FLAG_EXT_SRC              0x1000
++
++
++/*
++ *  ioctl Command
++ */
++#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
++#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
++#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
++#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
++#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
++#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
++#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
++#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
++
++/*
++ *  Data Type Used to Call ioctl
++ */
++struct gptu_ioctl_param {
++    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
++                                                 *  timer/counter. If it's zero, a timer/counter would  *
++                                                 *  be dynamically allocated and ID would be stored in  *
++                                                 *  this field.                                         *
++                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
++                                                 *  ignored.                                            *
++                                                 *  In other command, this field is ID of timer/counter *
++                                                 *  allocated.                                          */
++    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
++                                                 *  specify how to configure timer/counter.             *
++                                                 *  In command GPTU_START_TIMER, zero indicate start    *
++                                                 *  and non-zero indicate resume timer/counter.         *
++                                                 *  In other command, this field is ignored.            */
++    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
++                                                 *  init/reload value.                                  *
++                                                 *  In command GPTU_SET_TIMER, this field contains      *
++                                                 *  frequency (0.001Hz) of timer.                       *
++                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
++                                                 *  value would be stored in this field.                *
++                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
++                                                 *  contains frequency wanted, and after calculation,   *
++                                                 *  divider would be stored in this field to overwrite  *
++                                                 *  the frequency.                                      *
++                                                 *  In other command, this field is ignored.            */
++    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains process  *
++                                                 *  ID to which signal would be sent.                   *
++                                                 *  In other command, this field is ignored.            */
++    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains signal   *
++                                                 *  number which would be sent.                         *
++                                                 *  In other command, this field is ignored.            */
++};
++
++/*
++ * ####################################
++ *              Data Type
++ * ####################################
++ */
++typedef void (*timer_callback)(unsigned long arg);
++
++extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
++extern int ifxmips_free_timer(unsigned int);
++extern int ifxmips_start_timer(unsigned int, int);
++extern int ifxmips_stop_timer(unsigned int);
++extern int ifxmips_reset_counter_flags(u32 timer, u32 flags);
++extern int ifxmips_get_count_value(unsigned int, unsigned long *);
++extern u32 ifxmips_cal_divider(unsigned long);
++extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
++extern int ifxmips_set_counter(unsigned int timer, unsigned int flag,
++	u32 reload, unsigned long arg1, unsigned long arg2);
++
++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+--- /dev/null
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -0,0 +1,5 @@
++obj-y := pmu.o prom.o dma.o timer.o reset.o clk-xway.o
++obj-y += gpio.o gpio_ebu.o gpio_leds.o devices.o
++obj-$(CONFIG_LANTIQ_MACH_EASY50812) += mach-easy50812.o
++obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
++obj-$(CONFIG_LANTIQ_MACH_EASY4010) += mach-easy4010.o
+--- /dev/null
++++ b/arch/mips/lantiq/xway/clk-xway.c
+@@ -0,0 +1,219 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2007 Xu Liang, infineon
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/div64.h>
++
++#include <xway.h>
++
++static unsigned int lq_ram_clocks[] = {CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
++#define DDR_HZ lq_ram_clocks[lq_r32(LQ_CGU_SYS) & 0x3]
++
++#define BASIC_FREQUENCY_1	35328000
++#define BASIC_FREQUENCY_2	36000000
++#define BASIS_REQUENCY_USB	12000000
++
++#define GET_BITS(x, msb, lsb)           (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++
++#define CGU_PLL0_PHASE_DIVIDER_ENABLE   (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 31))
++#define CGU_PLL0_BYPASS                 (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 30))
++#define CGU_PLL0_CFG_DSMSEL             (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 28))
++#define CGU_PLL0_CFG_FRAC_EN            (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 27))
++#define CGU_PLL1_SRC                    (lq_r32(LQ_CGU_PLL1_CFG) & (1 << 31))
++#define CGU_PLL2_PHASE_DIVIDER_ENABLE   (lq_r32(LQ_CGU_PLL2_CFG) & (1 << 20))
++#define CGU_SYS_FPI_SEL                 (1 << 6)
++#define CGU_SYS_DDR_SEL                 0x3
++#define CGU_PLL0_SRC                    (1 << 29)
++
++#define CGU_PLL0_CFG_PLLK               GET_BITS(*LQ_CGU_PLL0_CFG, 26, 17)
++#define CGU_PLL0_CFG_PLLN               GET_BITS(*LQ_CGU_PLL0_CFG, 12, 6)
++#define CGU_PLL0_CFG_PLLM               GET_BITS(*LQ_CGU_PLL0_CFG, 5, 2)
++#define CGU_PLL2_SRC                    GET_BITS(*LQ_CGU_PLL2_CFG, 18, 17)
++#define CGU_PLL2_CFG_INPUT_DIV          GET_BITS(*LQ_CGU_PLL2_CFG, 16, 13)
++
++#define LQ_GPTU_GPT_CLC		((u32 *)(LQ_GPTU_BASE_ADDR + 0x0000))
++#define LQ_CGU_PLL0_CFG		((u32 *)(LQ_CGU_BASE_ADDR + 0x0004))
++#define LQ_CGU_PLL1_CFG		((u32 *)(LQ_CGU_BASE_ADDR + 0x0008))
++#define LQ_CGU_PLL2_CFG		((u32 *)(LQ_CGU_BASE_ADDR + 0x000C))
++#define LQ_CGU_SYS			((u32 *)(LQ_CGU_BASE_ADDR + 0x0010))
++#define LQ_CGU_UPDATE		((u32 *)(LQ_CGU_BASE_ADDR + 0x0014))
++#define LQ_CGU_IF_CLK		((u32 *)(LQ_CGU_BASE_ADDR + 0x0018))
++#define LQ_CGU_OSC_CON		((u32 *)(LQ_CGU_BASE_ADDR + 0x001C))
++#define LQ_CGU_SMD			((u32 *)(LQ_CGU_BASE_ADDR + 0x0020))
++#define LQ_CGU_CT1SR		((u32 *)(LQ_CGU_BASE_ADDR + 0x0028))
++#define LQ_CGU_CT2SR		((u32 *)(LQ_CGU_BASE_ADDR + 0x002C))
++#define LQ_CGU_PCMCR		((u32 *)(LQ_CGU_BASE_ADDR + 0x0030))
++#define LQ_CGU_PCI_CR		((u32 *)(LQ_CGU_BASE_ADDR + 0x0034))
++#define LQ_CGU_PD_PC		((u32 *)(LQ_CGU_BASE_ADDR + 0x0038))
++#define LQ_CGU_FMR			((u32 *)(LQ_CGU_BASE_ADDR + 0x003C))
++
++static unsigned int lq_get_pll0_fdiv(void);
++
++static inline unsigned int
++get_input_clock(int pll)
++{
++	switch (pll) {
++	case 0:
++		if (lq_r32(LQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
++			return BASIS_REQUENCY_USB;
++		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
++			return BASIC_FREQUENCY_1;
++		else
++			return BASIC_FREQUENCY_2;
++	case 1:
++		if (CGU_PLL1_SRC)
++			return BASIS_REQUENCY_USB;
++		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
++			return BASIC_FREQUENCY_1;
++		else
++			return BASIC_FREQUENCY_2;
++	case 2:
++		switch (CGU_PLL2_SRC) {
++		case 0:
++			return lq_get_pll0_fdiv();
++		case 1:
++			return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
++				BASIC_FREQUENCY_1 :
++				BASIC_FREQUENCY_2;
++		case 2:
++			return BASIS_REQUENCY_USB;
++		}
++	default:
++		return 0;
++	}
++}
++
++static inline unsigned int
++cal_dsm(int pll, unsigned int num, unsigned int den)
++{
++	u64 res, clock = get_input_clock(pll);
++	res = num * clock;
++	do_div(res, den);
++	return res;
++}
++
++static inline unsigned int
++mash_dsm(int pll, unsigned int M, unsigned int N, unsigned int K)
++{
++	unsigned int num = ((N + 1) << 10) + K;
++	unsigned int den = (M + 1) << 10;
++	return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int
++ssff_dsm_1(int pll, unsigned int M, unsigned int N,	unsigned int K)
++{
++	unsigned int num = ((N + 1) << 11) + K + 512;
++	unsigned int den = (M + 1) << 11;
++	return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int
++ssff_dsm_2(int pll, unsigned int M, unsigned int N, unsigned int K)
++{
++	unsigned int num = K >= 512 ?
++		((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
++	unsigned int den = (M + 1) << 12;
++	return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int
++dsm(int pll, unsigned int M, unsigned int N, unsigned int K,
++	unsigned int dsmsel, unsigned int phase_div_en)
++{
++	if (!dsmsel)
++		return mash_dsm(pll, M, N, K);
++	else if (!phase_div_en)
++		return mash_dsm(pll, M, N, K);
++	else
++		return ssff_dsm_2(pll, M, N, K);
++}
++
++static inline unsigned int
++lq_get_pll0_fosc(void)
++{
++	if (CGU_PLL0_BYPASS)
++		return get_input_clock(0);
++	else
++		return !CGU_PLL0_CFG_FRAC_EN
++			? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0, CGU_PLL0_CFG_DSMSEL,
++				CGU_PLL0_PHASE_DIVIDER_ENABLE)
++			: dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, CGU_PLL0_CFG_PLLK,
++				CGU_PLL0_CFG_DSMSEL, CGU_PLL0_PHASE_DIVIDER_ENABLE);
++}
++
++static unsigned int
++lq_get_pll0_fdiv(void)
++{
++	unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
++	return (lq_get_pll0_fosc() + (div >> 1)) / div;
++}
++
++unsigned int
++lq_get_io_region_clock(void)
++{
++	unsigned int ret = lq_get_pll0_fosc();
++	switch (lq_r32(LQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
++	default:
++	case 0:
++		return (ret + 1) / 2;
++	case 1:
++		return (ret * 2 + 2) / 5;
++	case 2:
++		return (ret + 1) / 3;
++	case 3:
++		return (ret + 2) / 4;
++	}
++}
++EXPORT_SYMBOL(lq_get_io_region_clock);
++
++unsigned int
++lq_get_fpi_bus_clock(int fpi)
++{
++	unsigned int ret = lq_get_io_region_clock();
++	if ((fpi == 2) && (lq_r32(LQ_CGU_SYS) & CGU_SYS_FPI_SEL))
++		ret >>= 1;
++	return ret;
++}
++EXPORT_SYMBOL(lq_get_fpi_bus_clock);
++
++unsigned int
++lq_get_cpu_hz(void)
++{
++	switch (lq_r32(LQ_CGU_SYS) & 0xc)
++	{
++	case 0:
++		return CLOCK_333M;
++	case 4:
++		return DDR_HZ;
++	case 8:
++		return DDR_HZ << 1;
++	default:
++		return DDR_HZ >> 1;
++	}
++}
++EXPORT_SYMBOL(lq_get_cpu_hz);
++
++unsigned int
++lq_get_fpi_hz(void)
++{
++	unsigned int ddr_clock = DDR_HZ;
++	if (lq_r32(LQ_CGU_SYS) & 0x40)
++		return ddr_clock >> 1;
++	return ddr_clock;
++}
++EXPORT_SYMBOL(lq_get_fpi_hz);
++
++
+--- /dev/null
++++ b/arch/mips/lantiq/xway/gpio.c
+@@ -0,0 +1,203 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#include <lantiq.h>
++
++#define LQ_GPIO0_BASE_ADDR	0x1E100B10
++#define LQ_GPIO1_BASE_ADDR	0x1E100B40
++#define LQ_GPIO_SIZE		0x30
++
++#define LQ_GPIO_OUT			0x00
++#define LQ_GPIO_IN			0x04
++#define LQ_GPIO_DIR			0x08
++#define LQ_GPIO_ALTSEL0		0x0C
++#define LQ_GPIO_ALTSEL1		0x10
++#define LQ_GPIO_OD			0x14
++
++#define PINS_PER_PORT		16
++
++#define lq_gpio_getbit(m, r, p)		!!(lq_r32(m + r) & (1 << p))
++#define lq_gpio_setbit(m, r, p)		lq_w32_mask(0, (1 << p), m + r)
++#define lq_gpio_clearbit(m, r, p)	lq_w32_mask((1 << p), 0, m + r)
++
++struct lq_gpio
++{
++	void __iomem *membase;
++	struct gpio_chip chip;
++};
++
++int
++gpio_to_irq(unsigned int gpio)
++{
++	return -EINVAL;
++}
++EXPORT_SYMBOL(gpio_to_irq);
++
++int
++lq_gpio_setconfig(unsigned int pin, unsigned int reg, unsigned int val)
++{
++	void __iomem *membase = (void*)KSEG1ADDR(LQ_GPIO0_BASE_ADDR);
++	if(pin >= (2 * PINS_PER_PORT))
++		return -EINVAL;
++	if(pin >= PINS_PER_PORT)
++	{
++		pin -= PINS_PER_PORT;
++		membase += LQ_GPIO_SIZE;
++	}
++	if(val)
++		lq_w32_mask(0, (1 << pin), membase + reg);
++	else
++		lq_w32_mask((1 << pin), 0, membase + reg);
++	return 0;
++}
++EXPORT_SYMBOL(lq_gpio_setconfig);
++
++int
++lq_gpio_request(unsigned int pin, unsigned int alt0,
++	unsigned int alt1, unsigned int dir, const char *name)
++{
++	void __iomem *membase = (void*)KSEG1ADDR(LQ_GPIO0_BASE_ADDR);
++	if(pin >= (2 * PINS_PER_PORT))
++		return -EINVAL;
++	if(gpio_request(pin, name))
++	{
++		printk("failed to register %s gpio\n", name);
++		return -EBUSY;
++	}
++	gpio_direction_output(pin, dir);
++	if(pin >= PINS_PER_PORT)
++	{
++		pin -= PINS_PER_PORT;
++		membase += LQ_GPIO_SIZE;
++	}
++	if(alt0)
++		lq_gpio_setbit(membase, LQ_GPIO_ALTSEL0, pin);
++	else
++		lq_gpio_clearbit(membase, LQ_GPIO_ALTSEL0, pin);
++	if(alt1)
++		lq_gpio_setbit(membase, LQ_GPIO_ALTSEL1, pin);
++	else
++		lq_gpio_clearbit(membase, LQ_GPIO_ALTSEL1, pin);
++	return 0;
++}
++EXPORT_SYMBOL(lq_gpio_request);
++
++static void
++lq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
++{
++	struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip);
++	if(value)
++		lq_gpio_setbit(lq_gpio->membase, LQ_GPIO_OUT, offset);
++	else
++		lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_OUT, offset);
++}
++
++static int
++lq_gpio_get(struct gpio_chip *chip, unsigned int offset)
++{
++	struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip);
++	return lq_gpio_getbit(lq_gpio->membase, LQ_GPIO_IN, offset);
++}
++
++static int
++lq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
++{
++	struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip);
++	lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_OD, offset);
++	lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_DIR, offset);
++	return 0;
++}
++
++static int
++lq_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value)
++{
++	struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip);
++	lq_gpio_setbit(lq_gpio->membase, LQ_GPIO_OD, offset);
++	lq_gpio_setbit(lq_gpio->membase, LQ_GPIO_DIR, offset);
++	lq_gpio_set(chip, offset, value);
++	return 0;
++}
++
++static int
++lq_gpio_req(struct gpio_chip *chip, unsigned offset)
++{
++	struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip);
++	lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_ALTSEL0, offset);
++	lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_ALTSEL1, offset);
++	return 0;
++}
++
++static int
++lq_gpio_probe(struct platform_device *pdev)
++{
++	struct lq_gpio *lq_gpio = kzalloc(sizeof(struct lq_gpio), GFP_KERNEL);
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	int ret = 0;
++	if(!res)
++	{
++		ret = -ENOENT;
++		goto err_free;
++	}
++	res = request_mem_region(res->start, resource_size(res),
++		dev_name(&pdev->dev));
++	if(!res)
++	{
++		ret = -EBUSY;
++		goto err_free;
++	}
++	lq_gpio->membase = ioremap_nocache(res->start, resource_size(res));
++	if(!lq_gpio->membase)
++	{
++		ret = -ENOMEM;
++		goto err_release_mem_region;
++	}
++	lq_gpio->chip.label = "lq_gpio";
++	lq_gpio->chip.direction_input = lq_gpio_direction_input;
++	lq_gpio->chip.direction_output = lq_gpio_direction_output;
++	lq_gpio->chip.get = lq_gpio_get;
++	lq_gpio->chip.set = lq_gpio_set;
++	lq_gpio->chip.request = lq_gpio_req;
++	lq_gpio->chip.base = PINS_PER_PORT * pdev->id;
++	lq_gpio->chip.ngpio = PINS_PER_PORT;
++	platform_set_drvdata(pdev, lq_gpio);
++	ret = gpiochip_add(&lq_gpio->chip);
++	if(!ret)
++		return 0;
++
++	iounmap(lq_gpio->membase);
++err_release_mem_region:
++	release_mem_region(res->start, resource_size(res));
++err_free:
++    kfree(lq_gpio);
++	return ret;
++}
++
++static struct platform_driver
++lq_gpio_driver = {
++	.probe = lq_gpio_probe,
++	.driver = {
++		.name = "lq_gpio",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init
++lq_gpio_init(void)
++{
++	int ret = platform_driver_register(&lq_gpio_driver);
++	if(ret)
++		printk(KERN_INFO "lq_gpio : Error registering platfom driver!");
++	return ret;
++}
++
++arch_initcall(lq_gpio_init);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -0,0 +1,53 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/pm.h>
++#include <asm/reboot.h>
++
++#include <xway.h>
++
++#define LQ_RCU_RST			((u32 *)(LQ_RCU_BASE_ADDR + 0x0010))
++#define LQ_RCU_RST_ALL		0x40000000
++
++static void
++lq_machine_restart(char *command)
++{
++	printk(KERN_NOTICE "System restart\n");
++	local_irq_disable();
++	lq_w32(lq_r32(LQ_RCU_RST) | LQ_RCU_RST_ALL,	LQ_RCU_RST);
++	for(;;);
++}
++
++static void
++lq_machine_halt(void)
++{
++	printk(KERN_NOTICE "System halted.\n");
++	local_irq_disable();
++	for(;;);
++}
++
++static void
++lq_machine_power_off(void)
++{
++	printk(KERN_NOTICE "Please turn off the power now.\n");
++	local_irq_disable();
++	for(;;);
++}
++
++static int __init
++mips_reboot_setup(void)
++{
++	_machine_restart = lq_machine_restart;
++	_machine_halt = lq_machine_halt;
++	pm_power_off = lq_machine_power_off;
++	return 0;
++}
++
++arch_initcall(mips_reboot_setup);
diff --git a/target/linux/lantiq/patches/105-header_xway.patch b/target/linux/lantiq/patches/105-header_xway.patch
new file mode 100644
index 0000000000..f41e335a6c
--- /dev/null
+++ b/target/linux/lantiq/patches/105-header_xway.patch
@@ -0,0 +1,565 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/irq.h
+@@ -0,0 +1,18 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef __LANTIQ_IRQ_H
++#define __LANTIQ_IRQ_H
++
++#include <xway_irq.h>
++
++#define NR_IRQS 256
++
++#include_next <irq.h>
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+@@ -0,0 +1,155 @@
++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++
++
++/******************************************************************************
++       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
++
++                               No Warranty
++   Because the program is licensed free of charge, there is no warranty for
++   the program, to the extent permitted by applicable law.  Except when
++   otherwise stated in writing the copyright holders and/or other parties
++   provide the program "as is" without warranty of any kind, either
++   expressed or implied, including, but not limited to, the implied
++   warranties of merchantability and fitness for a particular purpose. The
++   entire risk as to the quality and performance of the program is with
++   you.  should the program prove defective, you assume the cost of all
++   necessary servicing, repair or correction.
++
++   In no event unless required by applicable law or agreed to in writing
++   will any copyright holder, or any other party who may modify and/or
++   redistribute the program as permitted above, be liable to you for
++   damages, including any general, special, incidental or consequential
++   damages arising out of the use or inability to use the program
++   (including but not limited to loss of data or data being rendered
++   inaccurate or losses sustained by you or third parties or a failure of
++   the program to operate with any other programs), even if such holder or
++   other party has been advised of the possibility of such damages.
++******************************************************************************/
++
++
++/*
++ * ####################################
++ *              Definition
++ * ####################################
++ */
++
++/*
++ *  Available Timer/Counter Index
++ */
++#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
++#define TIMER_ANY                       0x00
++#define TIMER1A                         TIMER(1, 0)
++#define TIMER1B                         TIMER(1, 1)
++#define TIMER2A                         TIMER(2, 0)
++#define TIMER2B                         TIMER(2, 1)
++#define TIMER3A                         TIMER(3, 0)
++#define TIMER3B                         TIMER(3, 1)
++
++/*
++ *  Flag of Timer/Counter
++ *  These flags specify the way in which timer is configured.
++ */
++/*  Bit size of timer/counter.                      */
++#define TIMER_FLAG_16BIT                0x0000
++#define TIMER_FLAG_32BIT                0x0001
++/*  Switch between timer and counter.               */
++#define TIMER_FLAG_TIMER                0x0000
++#define TIMER_FLAG_COUNTER              0x0002
++/*  Stop or continue when overflowing/underflowing. */
++#define TIMER_FLAG_ONCE                 0x0000
++#define TIMER_FLAG_CYCLIC               0x0004
++/*  Count up or counter down.                       */
++#define TIMER_FLAG_UP                   0x0000
++#define TIMER_FLAG_DOWN                 0x0008
++/*  Count on specific level or edge.                */
++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
++#define TIMER_FLAG_RISE_EDGE            0x0010
++#define TIMER_FLAG_FALL_EDGE            0x0020
++#define TIMER_FLAG_ANY_EDGE             0x0030
++/*  Signal is syncronous to module clock or not.    */
++#define TIMER_FLAG_UNSYNC               0x0000
++#define TIMER_FLAG_SYNC                 0x0080
++/*  Different interrupt handle type.                */
++#define TIMER_FLAG_NO_HANDLE            0x0000
++#if defined(__KERNEL__)
++    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
++#endif  //  defined(__KERNEL__)
++#define TIMER_FLAG_SIGNAL               0x0300
++/*  Internal clock source or external clock source  */
++#define TIMER_FLAG_INT_SRC              0x0000
++#define TIMER_FLAG_EXT_SRC              0x1000
++
++
++/*
++ *  ioctl Command
++ */
++#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
++#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
++#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
++#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
++#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
++#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
++#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
++#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
++
++/*
++ *  Data Type Used to Call ioctl
++ */
++struct gptu_ioctl_param {
++    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
++                                                 *  timer/counter. If it's zero, a timer/counter would  *
++                                                 *  be dynamically allocated and ID would be stored in  *
++                                                 *  this field.                                         *
++                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
++                                                 *  ignored.                                            *
++                                                 *  In other command, this field is ID of timer/counter *
++                                                 *  allocated.                                          */
++    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
++                                                 *  specify how to configure timer/counter.             *
++                                                 *  In command GPTU_START_TIMER, zero indicate start    *
++                                                 *  and non-zero indicate resume timer/counter.         *
++                                                 *  In other command, this field is ignored.            */
++    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
++                                                 *  init/reload value.                                  *
++                                                 *  In command GPTU_SET_TIMER, this field contains      *
++                                                 *  frequency (0.001Hz) of timer.                       *
++                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
++                                                 *  value would be stored in this field.                *
++                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
++                                                 *  contains frequency wanted, and after calculation,   *
++                                                 *  divider would be stored in this field to overwrite  *
++                                                 *  the frequency.                                      *
++                                                 *  In other command, this field is ignored.            */
++    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains process  *
++                                                 *  ID to which signal would be sent.                   *
++                                                 *  In other command, this field is ignored.            */
++    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains signal   *
++                                                 *  number which would be sent.                         *
++                                                 *  In other command, this field is ignored.            */
++};
++
++/*
++ * ####################################
++ *              Data Type
++ * ####################################
++ */
++typedef void (*timer_callback)(unsigned long arg);
++
++extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
++extern int ifxmips_free_timer(unsigned int);
++extern int ifxmips_start_timer(unsigned int, int);
++extern int ifxmips_stop_timer(unsigned int);
++extern int ifxmips_reset_counter_flags(u32 timer, u32 flags);
++extern int ifxmips_get_count_value(unsigned int, unsigned long *);
++extern u32 ifxmips_cal_divider(unsigned long);
++extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
++extern int ifxmips_set_counter(unsigned int timer, unsigned int flag,
++	u32 reload, unsigned long arg1, unsigned long arg2);
++
++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway.h
+@@ -0,0 +1,121 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2005 infineon
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++
++#ifndef _LQ_XWAY_H__
++#define _LQ_XWAY_H__
++
++#include <lantiq.h>
++
++/* request a non-gpio and set the PIO config */
++extern int  lq_gpio_request(unsigned int pin, unsigned int alt0,
++    unsigned int alt1, unsigned int dir, const char *name);
++extern int lq_gpio_setconfig(unsigned int pin, unsigned int reg, unsigned int val);
++
++extern void lq_pmu_enable(unsigned int module);
++extern void lq_pmu_disable(unsigned int module);
++
++extern unsigned int lq_get_fpi_bus_clock(int bus);
++
++#define BOARD_SYSTEM_TYPE		"LANTIQ"
++
++/*------------ Chip IDs */
++#define SOC_ID_DANUBE1		0x129
++#define SOC_ID_DANUBE2		0x12B
++#define SOC_ID_TWINPASS		0x12D
++#define SOC_ID_ARX188		0x16C
++#define SOC_ID_ARX168		0x16D
++#define SOC_ID_ARX182		0x16F
++
++/*------------ SoC Types */
++#define SOC_TYPE_DANUBE		0x01
++#define SOC_TYPE_TWINPASS	0x02
++#define SOC_TYPE_AR9		0x03
++
++/*------------ ASC0/1 */
++#define LQ_ASC0_BASE		0x1E100400
++#define LQ_ASC1_BASE		0x1E100C00
++#define LQ_ASC_SIZE			0x400
++
++/*------------ RCU */
++#define LQ_RCU_BASE_ADDR	0xBF203000
++
++/*------------ GPTU */
++#define LQ_GPTU_BASE_ADDR	0xB8000300
++
++/*------------ EBU */
++#define LQ_EBU_GPIO_START	0x14000000
++#define LQ_EBU_GPIO_SIZE	0x1000
++
++#define LQ_EBU_BASE_ADDR	0xBE105300
++
++#define LQ_EBU_BUSCON0		((u32 *)(LQ_EBU_BASE_ADDR + 0x0060))
++#define LQ_EBU_PCC_CON		((u32 *)(LQ_EBU_BASE_ADDR + 0x0090))
++#define LQ_EBU_PCC_IEN		((u32 *)(LQ_EBU_BASE_ADDR + 0x00A4))
++#define LQ_EBU_PCC_ISTAT	((u32 *)(LQ_EBU_BASE_ADDR + 0x00A0))
++#define LQ_EBU_BUSCON1		((u32 *)(LQ_EBU_BASE_ADDR + 0x0064))
++#define LQ_EBU_ADDRSEL1		((u32 *)(LQ_EBU_BASE_ADDR + 0x0024))
++
++#define EBU_WRDIS			0x80000000
++
++/*------------ CGU */
++#define LQ_CGU_BASE_ADDR	(KSEG1 + 0x1F103000)
++
++/*------------ PMU */
++#define LQ_PMU_BASE_ADDR	(KSEG1 + 0x1F102000)
++
++#define PMU_DMA				0x0020
++#define PMU_USB				0x8041
++#define PMU_LED				0x0800
++#define PMU_GPT				0x1000
++#define PMU_PPE				0x2000
++#define PMU_FPI				0x4000
++#define PMU_SWITCH			0x10000000
++
++/*------------ ETOP */
++#define LQ_PPE32_BASE_ADDR	0xBE180000
++#define LQ_PPE32_SIZE		0x40000
++
++/*------------ DMA */
++#define LQ_DMA_BASE_ADDR	0xBE104100
++
++/*------------ PCI */
++#define PCI_CR_PR_BASE_ADDR	(KSEG1 + 0x1E105400)
++#define PCI_CS_PR_BASE_ADDR	(KSEG1 + 0x17000000)
++
++/*------------ WDT */
++#define LQ_WDT_BASE			0x1F880000
++#define LQ_WDT_SIZE			0x400
++
++/*------------ Serial To Parallel conversion  */
++#define LQ_STP_BASE			0x1E100BB0
++#define LQ_STP_SIZE			0x40
++
++/*------------ GPIO */
++#define LQ_GPIO0_BASE_ADDR	0x1E100B10
++#define LQ_GPIO1_BASE_ADDR	0x1E100B40
++#define LQ_GPIO_SIZE		0x30
++
++/*------------ SSC */
++#define LQ_SSC_BASE_ADDR	(KSEG1 + 0x1e100800)
++
++/*------------ MEI */
++#define LQ_MEI_BASE_ADDR	(KSEG1 + 0x1E116000)
++
++/*------------ DEU */
++#define LQ_DEU_BASE			(KSEG1 + 0x1E103100)
++
++/*------------ MPS */
++#define LQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
++#define LQ_MPS_CHIPID		((u32 *)(LQ_MPS_BASE_ADDR + 0x0344))
++
++#endif
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
+@@ -0,0 +1,144 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify it
++ *   under the terms of the GNU General Public License version 2 as published
++ *   by the Free Software Foundation.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2005 infineon
++ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
++ *
++ */
++#ifndef _LQ_DMA_H__
++#define _LQ_DMA_H__
++
++#define RCV_INT						1
++#define TX_BUF_FULL_INT					2
++#define TRANSMIT_CPT_INT				4
++#define LQ_DMA_CH_ON				1
++#define LQ_DMA_CH_OFF				0
++#define LQ_DMA_CH_DEFAULT_WEIGHT			100
++
++enum attr_t{
++	TX = 0,
++	RX = 1,
++	RESERVED = 2,
++	DEFAULT = 3,
++};
++
++#define DMA_OWN						1
++#define CPU_OWN						0
++#define DMA_MAJOR					250
++
++#define DMA_DESC_OWN_CPU				0x0
++#define DMA_DESC_OWN_DMA				0x80000000
++#define DMA_DESC_CPT_SET				0x40000000
++#define DMA_DESC_SOP_SET				0x20000000
++#define DMA_DESC_EOP_SET				0x10000000
++
++#define MISCFG_MASK					0x40
++#define RDERR_MASK					0x20
++#define CHOFF_MASK					0x10
++#define DESCPT_MASK					0x8
++#define DUR_MASK					0x4
++#define EOP_MASK					0x2
++
++#define DMA_DROP_MASK					(1<<31)
++
++#define LQ_DMA_RX					-1
++#define LQ_DMA_TX					1
++
++struct dma_chan_map {
++	const char *dev_name;
++	enum attr_t dir;
++	int pri;
++	int irq;
++	int rel_chan_no;
++};
++
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++struct rx_desc {
++	u32 data_length:16;
++	volatile u32 reserved:7;
++	volatile u32 byte_offset:2;
++	volatile u32 Burst_length_offset:3;
++	volatile u32 EoP:1;
++	volatile u32 Res:1;
++	volatile u32 C:1;
++	volatile u32 OWN:1;
++	volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
++};
++
++struct tx_desc {
++	volatile u32 data_length:16;
++	volatile u32 reserved1:7;
++	volatile u32 byte_offset:5;
++	volatile u32 EoP:1;
++	volatile u32 SoP:1;
++	volatile u32 C:1;
++	volatile u32 OWN:1;
++	volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
++};
++#else /* BIG */
++struct rx_desc {
++	union {
++		struct {
++			volatile u32 OWN:1;
++			volatile u32 C:1;
++			volatile u32 SoP:1;
++			volatile u32 EoP:1;
++			volatile u32 Burst_length_offset:3;
++			volatile u32 byte_offset:2;
++			volatile u32 reserve:7;
++			volatile u32 data_length:16;
++		} field;
++		volatile u32 word;
++	} status;
++	volatile u32 Data_Pointer;
++};
++
++struct tx_desc {
++	union {
++		struct {
++			volatile u32 OWN:1;
++			volatile u32 C:1;
++			volatile u32 SoP:1;
++			volatile u32 EoP:1;
++			volatile u32 byte_offset:5;
++			volatile u32 reserved:7;
++			volatile u32 data_length:16;
++		} field;
++		volatile u32 word;
++	} status;
++	volatile u32 Data_Pointer;
++};
++#endif /* ENDIAN */
++
++struct dma_channel_info {
++	/* relative channel number */
++	int rel_chan_no;
++	/* class for this channel for QoS */
++	int pri;
++	/* specify byte_offset */
++	int byte_offset;
++	/* direction */
++	int dir;
++	/* irq number */
++	int irq;
++	/* descriptor parameter */
++	int desc_base;
++	int desc_len;
++	int curr_desc;
++	int prev_desc; /* only used if it is a tx channel*/
++	/* weight setting for WFQ algorithm*/
++	int weight;
++	int default_weight;
++	int packet_size;
++	int burst_len;
++	/* on or off of this channel */
++	int control;
++	/* optional information for the upper layer devices */
++#if defined(CONFIG_LQ_ETHERNET_D2) || defined(CONFIG_LQ_PPA)
++	void *opt[64];
++#else
++	void *opt[25];
++#endif
++	/* Pointer to the peripheral device who is using this channel */
++	void *dma_dev;
++	/* channel operations */
++	void (*open)(struct dma_channel_info *pCh);
++	void (*close)(struct dma_channel_info *pCh);
++	void (*reset)(struct dma_channel_info *pCh);
++	void (*enable_irq)(struct dma_channel_info *pCh);
++	void (*disable_irq)(struct dma_channel_info *pCh);
++};
++
++struct dma_device_info {
++	/* device name of this peripheral */
++	char device_name[15];
++	int reserved;
++	int tx_burst_len;
++	int rx_burst_len;
++	int default_weight;
++	int current_tx_chan;
++	int current_rx_chan;
++	int num_tx_chan;
++	int num_rx_chan;
++	int max_rx_chan_num;
++	int max_tx_chan_num;
++	struct dma_channel_info *tx_chan[20];
++	struct dma_channel_info *rx_chan[20];
++	/*functions, optional*/
++	u8 *(*buffer_alloc)(int len, int *offset, void **opt);
++	void (*buffer_free)(u8 *dataptr, void *opt);
++	int (*intr_handler)(struct dma_device_info *info, int status);
++	void *priv;		/* used by peripheral driver only */
++};
++
++struct dma_device_info *dma_device_reserve(char *dev_name);
++void dma_device_release(struct dma_device_info *dev);
++void dma_device_register(struct dma_device_info *info);
++void dma_device_unregister(struct dma_device_info *info);
++int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt);
++int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len,
++	void *opt);
++
++#endif
++
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/xway/xway_irq.h
+@@ -0,0 +1,62 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LANTIQ_XWAY_IRQ_H__
++#define _LANTIQ_XWAY_IRQ_H__
++
++#define INT_NUM_IRQ0			8
++#define INT_NUM_IM0_IRL0		(INT_NUM_IRQ0 + 0)
++#define INT_NUM_IM1_IRL0		(INT_NUM_IRQ0 + 32)
++#define INT_NUM_IM2_IRL0		(INT_NUM_IRQ0 + 64)
++#define INT_NUM_IM3_IRL0		(INT_NUM_IRQ0 + 96)
++#define INT_NUM_IM4_IRL0		(INT_NUM_IRQ0 + 128)
++#define INT_NUM_IM_OFFSET		(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
++
++#define LQ_ASC_TIR(x)		(INT_NUM_IM3_IRL0 + (x * 7))
++#define LQ_ASC_RIR(x)		(INT_NUM_IM3_IRL0 + (x * 7) + 2)
++#define LQ_ASC_EIR(x)		(INT_NUM_IM3_IRL0 + (x * 7) + 3)
++
++#define LQ_SSC_TIR			(INT_NUM_IM0_IRL0 + 15)
++#define LQ_SSC_RIR			(INT_NUM_IM0_IRL0 + 14)
++#define LQ_SSC_EIR			(INT_NUM_IM0_IRL0 + 16)
++
++#define LQ_MEI_DYING_GASP_INT	(INT_NUM_IM1_IRL0 + 21)
++#define LQ_MEI_INT			(INT_NUM_IM1_IRL0 + 23)
++
++#define LQ_TIMER6_INT		(INT_NUM_IM1_IRL0 + 23)
++#define LQ_USB_INT			(INT_NUM_IM1_IRL0 + 22)
++#define LQ_USB_OC_INT		(INT_NUM_IM4_IRL0 + 23)
++
++#define MIPS_CPU_TIMER_IRQ		7
++
++#define LQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
++#define LQ_DMA_CH1_INT		(INT_NUM_IM2_IRL0 + 1)
++#define LQ_DMA_CH2_INT		(INT_NUM_IM2_IRL0 + 2)
++#define LQ_DMA_CH3_INT		(INT_NUM_IM2_IRL0 + 3)
++#define LQ_DMA_CH4_INT		(INT_NUM_IM2_IRL0 + 4)
++#define LQ_DMA_CH5_INT		(INT_NUM_IM2_IRL0 + 5)
++#define LQ_DMA_CH6_INT		(INT_NUM_IM2_IRL0 + 6)
++#define LQ_DMA_CH7_INT		(INT_NUM_IM2_IRL0 + 7)
++#define LQ_DMA_CH8_INT		(INT_NUM_IM2_IRL0 + 8)
++#define LQ_DMA_CH9_INT		(INT_NUM_IM2_IRL0 + 9)
++#define LQ_DMA_CH10_INT		(INT_NUM_IM2_IRL0 + 10)
++#define LQ_DMA_CH11_INT		(INT_NUM_IM2_IRL0 + 11)
++#define LQ_DMA_CH12_INT		(INT_NUM_IM2_IRL0 + 25)
++#define LQ_DMA_CH13_INT		(INT_NUM_IM2_IRL0 + 26)
++#define LQ_DMA_CH14_INT		(INT_NUM_IM2_IRL0 + 27)
++#define LQ_DMA_CH15_INT		(INT_NUM_IM2_IRL0 + 28)
++#define LQ_DMA_CH16_INT		(INT_NUM_IM2_IRL0 + 29)
++#define LQ_DMA_CH17_INT		(INT_NUM_IM2_IRL0 + 30)
++#define LQ_DMA_CH18_INT		(INT_NUM_IM2_IRL0 + 16)
++#define LQ_DMA_CH19_INT		(INT_NUM_IM2_IRL0 + 21)
++
++#define LQ_PPE_MBOX_INT		(INT_NUM_IM2_IRL0 + 24)
++
++#define INT_NUM_IM4_IRL14			(INT_NUM_IM4_IRL0 + 14)
++
++#endif
diff --git a/target/linux/lantiq/patches/106-early_printk.patch b/target/linux/lantiq/patches/106-early_printk.patch
new file mode 100644
index 0000000000..34e0bdf4d2
--- /dev/null
+++ b/target/linux/lantiq/patches/106-early_printk.patch
@@ -0,0 +1,93 @@
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -33,4 +33,19 @@ endchoice
+ source "arch/mips/lantiq/falcon/Kconfig"
+ source "arch/mips/lantiq/xway/Kconfig"
+ 
++if EARLY_PRINTK
++choice
++	prompt "Early printk port"
++	default LANTIQ_PROM_ASC1
++	help
++	  Choose which serial port is used, until the console driver is loaded
++
++config LANTIQ_PROM_ASC0
++	bool "ASC0"
++
++config LANTIQ_PROM_ASC1
++	bool "ASC1"
++endchoice
++endif
++
+ endif
+--- /dev/null
++++ b/arch/mips/lantiq/early_printk.c
+@@ -0,0 +1,68 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/cpu.h>
++
++#include <lantiq.h>
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++#include <xway.h>
++#ifdef CONFIG_LANTIQ_PROM_ASC0
++#define LQ_ASC_BASE	KSEG1ADDR(LQ_ASC0_BASE)
++#else
++#define LQ_ASC_BASE	KSEG1ADDR(LQ_ASC1_BASE)
++#endif
++
++#elif CONFIG_SOC_LANTIQ_FALCON
++#include <falcon/gpon_reg_base.h>
++#ifdef CONFIG_LANTIQ_PROM_ASC0
++#define LQ_ASC_BASE	GPON_ASC0_BASE
++#else
++#define LQ_ASC_BASE	GPON_ASC1_BASE
++#endif
++
++#endif
++
++#define ASC_BUF				1024
++#define LQ_ASC_FSTAT		0x0048
++#define LQ_ASC_TBUF			0x0020
++#define TXMASK				0x3F00
++#define TXOFFSET			8
++
++static char buf[ASC_BUF];
++
++void
++prom_putchar(char c)
++{
++	unsigned long flags;
++
++	local_irq_save(flags);
++	while ((lq_r32((u32 *)(LQ_ASC_BASE + LQ_ASC_FSTAT)) & TXMASK) >> TXOFFSET);
++
++	if (c == '\n')
++		lq_w32('\r', (u32 *)(LQ_ASC_BASE + LQ_ASC_TBUF));
++	lq_w32(c, (u32 *)(LQ_ASC_BASE + LQ_ASC_TBUF));
++	local_irq_restore(flags);
++}
++
++void
++early_printf(const char *fmt, ...)
++{
++	va_list args;
++	int l;
++	char *p, *buf_end;
++
++	va_start(args, fmt);
++	l = vsnprintf(buf, ASC_BUF, fmt, args);
++	va_end(args);
++	buf_end = buf + l;
++
++	for (p = buf; p < buf_end; p++)
++		prom_putchar(*p);
++}
diff --git a/target/linux/lantiq/patches/110-machine.patch b/target/linux/lantiq/patches/110-machine.patch
new file mode 100644
index 0000000000..9d0b7b71c8
--- /dev/null
+++ b/target/linux/lantiq/patches/110-machine.patch
@@ -0,0 +1,55 @@
+--- a/arch/mips/lantiq/setup.c
++++ b/arch/mips/lantiq/setup.c
+@@ -13,7 +13,8 @@
+ #include <linux/ioport.h>
+ 
+ #include <lantiq.h>
+-#include <lantiq_regs.h>
++
++#include <machine.h>
+ 
+ void __init
+ plat_mem_setup(void)
+@@ -46,3 +47,25 @@ plat_mem_setup(void)
+ 	memsize *= 1024 * 1024;
+ 	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
+ }
++
++static int __init
++lq_machine_setup(void)
++{
++	mips_machine_setup();
++	return 0;
++}
++
++static void __init
++mach_generic_init(void)
++{
++}
++
++MIPS_MACHINE(LANTIQ_MACH_GENERIC,
++			"Generic",
++			"Generic",
++			mach_generic_init);
++
++arch_initcall(lq_machine_setup);
++
++/* for backward compatibility, define "board=" as alias for "machtype=" */
++__setup("board=", mips_machtype_setup);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/machine.h
+@@ -0,0 +1,14 @@
++#include <asm/mips_machine.h>
++
++enum lantiq_mach_type {
++	LANTIQ_MACH_GENERIC,
++
++	/* FALCON */
++	LANTIQ_MACH_EASY98000,		/* Falcon Eval Board, NOR Flash */
++	LANTIQ_MACH_EASY98020,		/* Falcon Reference Board */
++
++	/* XWAY */
++	LANTIQ_MACH_EASY4010,		/* Twinpass evalkit */
++	LANTIQ_MACH_EASY50712,		/* Danube evalkit */
++	LANTIQ_MACH_EASY50812,		/* AR9 eval board */
++};
diff --git a/target/linux/lantiq/patches/200-serial.patch b/target/linux/lantiq/patches/200-serial.patch
new file mode 100644
index 0000000000..a13022786b
--- /dev/null
+++ b/target/linux/lantiq/patches/200-serial.patch
@@ -0,0 +1,799 @@
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1397,6 +1397,14 @@
+ 	help
+ 	  Support for Console on the NWP serial ports.
+ 
++config SERIAL_LANTIQ
++	bool "Lantiq serial driver"
++	depends on LANTIQ
++	select SERIAL_CORE
++	select SERIAL_CORE_CONSOLE
++	help
++	  Driver for the Lantiq SoC ASC hardware
++
+ config SERIAL_QE
+ 	tristate "Freescale QUICC Engine serial port support"
+ 	depends on QUICC_ENGINE
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -84,3 +84,4 @@
+ obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
+ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
+ obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
++obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
+--- /dev/null
++++ b/drivers/serial/lantiq.c
+@@ -0,0 +1,772 @@
++/*
++ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ * Copyright (C) 2004 Infineon IFAP DC COM CPE
++ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2010 Thomas Langer, Lantiq Deutschland
++ */
++
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/console.h>
++#include <linux/sysrq.h>
++#include <linux/device.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/serial_core.h>
++#include <linux/serial.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++
++#define lq_r32(reg)			__raw_readl(reg)
++#define lq_r8(reg)				__raw_readb(reg)
++#define lq_w32(val, reg)			__raw_writel(val, reg)
++#define lq_w8(val, reg)			__raw_writeb(val, reg)
++#define lq_w32_mask(clear, set, reg)	lq_w32((lq_r32(reg) & ~(clear)) | (set), reg)
++
++#define PORT_IFXMIPSASC		111
++#define MAXPORTS		2
++
++#define UART_DUMMY_UER_RX 1
++
++#define DRVNAME "lq_asc"
++
++#ifdef __BIG_ENDIAN
++#define IFXMIPS_ASC_TBUF		(0x0020 + 3)
++#define IFXMIPS_ASC_RBUF		(0x0024 + 3)
++#else
++#define IFXMIPS_ASC_TBUF		0x0020
++#define IFXMIPS_ASC_RBUF		0x0024
++#endif
++
++#define IFXMIPS_ASC_FSTAT		0x0048
++#define IFXMIPS_ASC_WHBSTATE		0x0018
++#define IFXMIPS_ASC_STATE		0x0014
++#define IFXMIPS_ASC_IRNCR		0x00F8
++#define IFXMIPS_ASC_CLC			0x0000
++#define IFXMIPS_ASC_ID			0x0008
++#define IFXMIPS_ASC_PISEL		0x0004
++#define IFXMIPS_ASC_TXFCON		0x0044
++#define IFXMIPS_ASC_RXFCON		0x0040
++#define IFXMIPS_ASC_CON			0x0010
++#define IFXMIPS_ASC_BG			0x0050
++#define IFXMIPS_ASC_IRNREN		0x00F4
++
++#define ASC_IRNREN_TX			0x1
++#define ASC_IRNREN_RX			0x2
++#define ASC_IRNREN_ERR			0x4
++#define ASC_IRNREN_TX_BUF		0x8
++#define ASC_IRNCR_TIR			0x1
++#define ASC_IRNCR_RIR			0x2
++#define ASC_IRNCR_EIR			0x4
++
++#define ASCOPT_CSIZE			0x3
++#define ASCOPT_CS7			0x1
++#define ASCOPT_CS8			0x2
++#define ASCOPT_PARENB			0x4
++#define ASCOPT_STOPB			0x8
++#define ASCOPT_PARODD			0x0
++#define ASCOPT_CREAD			0x20
++#define TXFIFO_FL			1
++#define RXFIFO_FL			1
++#define ASCCLC_DISS			0x2
++#define ASCCLC_RMCMASK			0x0000FF00
++#define ASCCLC_RMCOFFSET		8
++#define ASCCON_M_8ASYNC			0x0
++#define ASCCON_M_7ASYNC			0x2
++#define ASCCON_ODD			0x00000020
++#define ASCCON_STP			0x00000080
++#define ASCCON_BRS			0x00000100
++#define ASCCON_FDE			0x00000200
++#define ASCCON_R			0x00008000
++#define ASCCON_FEN			0x00020000
++#define ASCCON_ROEN			0x00080000
++#define ASCCON_TOEN			0x00100000
++#define ASCSTATE_PE			0x00010000
++#define ASCSTATE_FE			0x00020000
++#define ASCSTATE_ROE			0x00080000
++#define ASCSTATE_ANY			(ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
++#define ASCWHBSTATE_CLRREN		0x00000001
++#define ASCWHBSTATE_SETREN		0x00000002
++#define ASCWHBSTATE_CLRPE		0x00000004
++#define ASCWHBSTATE_CLRFE		0x00000008
++#define ASCWHBSTATE_CLRROE		0x00000020
++#define ASCTXFCON_TXFEN			0x0001
++#define ASCTXFCON_TXFFLU		0x0002
++#define ASCTXFCON_TXFITLMASK		0x3F00
++#define ASCTXFCON_TXFITLOFF		8
++#define ASCRXFCON_RXFEN			0x0001
++#define ASCRXFCON_RXFFLU		0x0002
++#define ASCRXFCON_RXFITLMASK		0x3F00
++#define ASCRXFCON_RXFITLOFF		8
++#define ASCFSTAT_RXFFLMASK		0x003F
++#define ASCFSTAT_TXFFLMASK		0x3F00
++#define ASCFSTAT_TXFFLOFF		8
++#define ASCFSTAT_RXFREEMASK		0x003F0000
++#define ASCFSTAT_RXFREEOFF		16
++#define ASCFSTAT_TXFREEMASK		0x3F000000
++#define ASCFSTAT_TXFREEOFF		24
++
++static void lqasc_tx_chars(struct uart_port *port);
++extern void prom_printf(const char *fmt, ...);
++static struct lq_uart_port *lqasc_port[2];
++static struct uart_driver lqasc_reg;
++
++struct lq_uart_port {
++	struct uart_port	port;
++	struct clk			*clk;
++	unsigned int		tx_irq;
++	unsigned int		rx_irq;
++	unsigned int		err_irq;
++};
++
++static inline struct
++lq_uart_port *to_lq_uart_port(struct uart_port *port)
++{
++	return container_of(port, struct lq_uart_port, port);
++}
++
++static void
++lqasc_stop_tx(struct uart_port *port)
++{
++	return;
++}
++
++static void
++lqasc_start_tx(struct uart_port *port)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++	lqasc_tx_chars(port);
++	local_irq_restore(flags);
++	return;
++}
++
++static void
++lqasc_stop_rx(struct uart_port *port)
++{
++	lq_w32(ASCWHBSTATE_CLRREN, port->membase + IFXMIPS_ASC_WHBSTATE);
++}
++
++static void
++lqasc_enable_ms(struct uart_port *port)
++{
++}
++
++static void
++lqasc_rx_chars(struct uart_port *port)
++{
++	struct tty_struct *tty = port->state->port.tty;
++	unsigned int ch = 0, rsr = 0, fifocnt;
++
++	fifocnt = lq_r32(port->membase + IFXMIPS_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
++	while (fifocnt--) {
++		u8 flag = TTY_NORMAL;
++		ch = lq_r8(port->membase + IFXMIPS_ASC_RBUF);
++		rsr = (lq_r32(port->membase + IFXMIPS_ASC_STATE)
++			& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
++		tty_flip_buffer_push(tty);
++		port->icount.rx++;
++
++		/*
++		 * Note that the error handling code is
++		 * out of the main execution path
++		 */
++		if (rsr & ASCSTATE_ANY) {
++			if (rsr & ASCSTATE_PE) {
++				port->icount.parity++;
++				lq_w32_mask(0, ASCWHBSTATE_CLRPE,
++					port->membase + IFXMIPS_ASC_WHBSTATE);
++			} else if (rsr & ASCSTATE_FE) {
++				port->icount.frame++;
++				lq_w32_mask(0, ASCWHBSTATE_CLRFE,
++					port->membase + IFXMIPS_ASC_WHBSTATE);
++			}
++			if (rsr & ASCSTATE_ROE) {
++				port->icount.overrun++;
++				lq_w32_mask(0, ASCWHBSTATE_CLRROE,
++					port->membase + IFXMIPS_ASC_WHBSTATE);
++			}
++
++			rsr &= port->read_status_mask;
++
++			if (rsr & ASCSTATE_PE)
++				flag = TTY_PARITY;
++			else if (rsr & ASCSTATE_FE)
++				flag = TTY_FRAME;
++		}
++
++		if ((rsr & port->ignore_status_mask) == 0)
++			tty_insert_flip_char(tty, ch, flag);
++
++		if (rsr & ASCSTATE_ROE)
++			/*
++			 * Overrun is special, since it's reported
++			 * immediately, and doesn't affect the current
++			 * character
++			 */
++			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
++	}
++	if (ch != 0)
++		tty_flip_buffer_push(tty);
++	return;
++}
++
++static void
++lqasc_tx_chars(struct uart_port *port)
++{
++	struct circ_buf *xmit = &port->state->xmit;
++	if (uart_tx_stopped(port)) {
++		lqasc_stop_tx(port);
++		return;
++	}
++
++	while (((lq_r32(port->membase + IFXMIPS_ASC_FSTAT) &
++		ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
++		if (port->x_char) {
++			lq_w8(port->x_char, port->membase + IFXMIPS_ASC_TBUF);
++			port->icount.tx++;
++			port->x_char = 0;
++			continue;
++		}
++
++		if (uart_circ_empty(xmit))
++			break;
++
++		lq_w8(port->state->xmit.buf[port->state->xmit.tail],
++			port->membase + IFXMIPS_ASC_TBUF);
++		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++		port->icount.tx++;
++	}
++
++	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++		uart_write_wakeup(port);
++}
++
++static irqreturn_t
++lqasc_tx_int(int irq, void *_port)
++{
++	struct uart_port *port = (struct uart_port *)_port;
++	lq_w32(ASC_IRNCR_TIR, port->membase + IFXMIPS_ASC_IRNCR);
++	lqasc_start_tx(port);
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t
++lqasc_err_int(int irq, void *_port)
++{
++	struct uart_port *port = (struct uart_port *)_port;
++	/* clear any pending interrupts */
++	lq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE,
++		port->membase + IFXMIPS_ASC_WHBSTATE);
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t
++lqasc_rx_int(int irq, void *_port)
++{
++	struct uart_port *port = (struct uart_port *)_port;
++	lq_w32(ASC_IRNCR_RIR, port->membase + IFXMIPS_ASC_IRNCR);
++	lqasc_rx_chars(port);
++	return IRQ_HANDLED;
++}
++
++static unsigned int
++lqasc_tx_empty(struct uart_port *port)
++{
++	int status;
++	status = lq_r32(port->membase + IFXMIPS_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
++	return status ? 0 : TIOCSER_TEMT;
++}
++
++static unsigned int
++lqasc_get_mctrl(struct uart_port *port)
++{
++	return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
++}
++
++static void
++lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void
++lqasc_break_ctl(struct uart_port *port, int break_state)
++{
++}
++
++static int
++lqasc_startup(struct uart_port *port)
++{
++	struct lq_uart_port *ifx_port = to_lq_uart_port(port);
++	int retval;
++
++	port->uartclk = clk_get_rate(ifx_port->clk);
++
++	lq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
++		port->membase + IFXMIPS_ASC_CLC);
++
++	lq_w32(0, port->membase + IFXMIPS_ASC_PISEL);
++	lq_w32(
++		((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
++		ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
++		port->membase + IFXMIPS_ASC_TXFCON);
++	lq_w32(
++		((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
++		| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
++		port->membase + IFXMIPS_ASC_RXFCON);
++	/* make sure other settings are written to hardware before setting enable bits */
++	wmb();
++	lq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
++		ASCCON_ROEN, port->membase + IFXMIPS_ASC_CON);
++
++	retval = request_irq(ifx_port->tx_irq, lqasc_tx_int,
++		IRQF_DISABLED, "asc_tx", port);
++	if (retval) {
++		pr_err("failed to request lqasc_tx_int\n");
++		return retval;
++	}
++
++	retval = request_irq(ifx_port->rx_irq, lqasc_rx_int,
++		IRQF_DISABLED, "asc_rx", port);
++	if (retval) {
++		pr_err("failed to request lqasc_rx_int\n");
++		goto err1;
++	}
++
++	retval = request_irq(ifx_port->err_irq, lqasc_err_int,
++		IRQF_DISABLED, "asc_err", port);
++	if (retval) {
++		pr_err("failed to request lqasc_err_int\n");
++		goto err2;
++	}
++
++	lq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
++		port->membase + IFXMIPS_ASC_IRNREN);
++	return 0;
++
++err2:
++	free_irq(ifx_port->rx_irq, port);
++err1:
++	free_irq(ifx_port->tx_irq, port);
++	return retval;
++}
++
++static void
++lqasc_shutdown(struct uart_port *port)
++{
++	struct lq_uart_port *ifx_port = to_lq_uart_port(port);
++	free_irq(ifx_port->tx_irq, port);
++	free_irq(ifx_port->rx_irq, port);
++	free_irq(ifx_port->err_irq, port);
++
++	lq_w32(0, port->membase + IFXMIPS_ASC_CON);
++	lq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
++		port->membase + IFXMIPS_ASC_RXFCON);
++	lq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
++		port->membase + IFXMIPS_ASC_TXFCON);
++}
++
++static void
++lqasc_set_termios(struct uart_port *port,
++	struct ktermios *new, struct ktermios *old)
++{
++	unsigned int cflag;
++	unsigned int iflag;
++	unsigned int quot;
++	unsigned int baud;
++	unsigned int con = 0;
++	unsigned long flags;
++
++	cflag = new->c_cflag;
++	iflag = new->c_iflag;
++
++	switch (cflag & CSIZE) {
++	case CS7:
++		con = ASCCON_M_7ASYNC;
++		break;
++
++	case CS5:
++	case CS6:
++	default:
++		con = ASCCON_M_8ASYNC;
++		break;
++	}
++
++	if (cflag & CSTOPB)
++		con |= ASCCON_STP;
++
++	if (cflag & PARENB) {
++		if (!(cflag & PARODD))
++			con &= ~ASCCON_ODD;
++		else
++			con |= ASCCON_ODD;
++	}
++
++	port->read_status_mask = ASCSTATE_ROE;
++	if (iflag & INPCK)
++		port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
++
++	port->ignore_status_mask = 0;
++	if (iflag & IGNPAR)
++		port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
++
++	if (iflag & IGNBRK) {
++		/*
++		 * If we're ignoring parity and break indicators,
++		 * ignore overruns too (for real raw support).
++		 */
++		if (iflag & IGNPAR)
++			port->ignore_status_mask |= ASCSTATE_ROE;
++	}
++
++	if ((cflag & CREAD) == 0)
++		port->ignore_status_mask |= UART_DUMMY_UER_RX;
++
++	/* set error signals  - framing, parity  and overrun, enable receiver */
++	con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
++
++	local_irq_save(flags);
++
++	/* set up CON */
++	lq_w32_mask(0, con, port->membase + IFXMIPS_ASC_CON);
++
++	/* Set baud rate - take a divider of 2 into account */
++	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
++	quot = uart_get_divisor(port, baud);
++	quot = quot / 2 - 1;
++
++	/* disable the baudrate generator */
++	lq_w32_mask(ASCCON_R, 0, port->membase + IFXMIPS_ASC_CON);
++
++	/* make sure the fractional divider is off */
++	lq_w32_mask(ASCCON_FDE, 0, port->membase + IFXMIPS_ASC_CON);
++
++	/* set up to use divisor of 2 */
++	lq_w32_mask(ASCCON_BRS, 0, port->membase + IFXMIPS_ASC_CON);
++
++	/* now we can write the new baudrate into the register */
++	lq_w32(quot, port->membase + IFXMIPS_ASC_BG);
++
++	/* turn the baudrate generator back on */
++	lq_w32_mask(0, ASCCON_R, port->membase + IFXMIPS_ASC_CON);
++
++	/* enable rx */
++	lq_w32(ASCWHBSTATE_SETREN, port->membase + IFXMIPS_ASC_WHBSTATE);
++
++	local_irq_restore(flags);
++}
++
++static const char*
++lqasc_type(struct uart_port *port)
++{
++	if (port->type == PORT_IFXMIPSASC)
++		return DRVNAME;
++	else
++		return NULL;
++}
++
++static void
++lqasc_release_port(struct uart_port *port)
++{
++	if (port->flags & UPF_IOREMAP) {
++		iounmap(port->membase);
++		port->membase = NULL;
++	}
++}
++
++static int
++lqasc_request_port(struct uart_port *port)
++{
++	struct platform_device *pdev = to_platform_device(port->dev);
++	struct resource *mmres;
++	int size;
++
++	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!mmres)
++		return -ENODEV;
++	size = resource_size(mmres);
++
++	if (port->flags & UPF_IOREMAP) {
++		port->membase = ioremap_nocache(port->mapbase, size);
++		if (port->membase == NULL)
++			return -ENOMEM;
++	}
++	return 0;
++}
++
++static void
++lqasc_config_port(struct uart_port *port, int flags)
++{
++	if (flags & UART_CONFIG_TYPE) {
++		port->type = PORT_IFXMIPSASC;
++		lqasc_request_port(port);
++	}
++}
++
++static int
++lqasc_verify_port(struct uart_port *port,
++	struct serial_struct *ser)
++{
++	int ret = 0;
++	if (ser->type != PORT_UNKNOWN && ser->type != PORT_IFXMIPSASC)
++		ret = -EINVAL;
++	if (ser->irq < 0 || ser->irq >= NR_IRQS)
++		ret = -EINVAL;
++	if (ser->baud_base < 9600)
++		ret = -EINVAL;
++	return ret;
++}
++
++static struct uart_ops lqasc_pops = {
++	.tx_empty =	lqasc_tx_empty,
++	.set_mctrl =	lqasc_set_mctrl,
++	.get_mctrl =	lqasc_get_mctrl,
++	.stop_tx =	lqasc_stop_tx,
++	.start_tx =	lqasc_start_tx,
++	.stop_rx =	lqasc_stop_rx,
++	.enable_ms =	lqasc_enable_ms,
++	.break_ctl =	lqasc_break_ctl,
++	.startup =	lqasc_startup,
++	.shutdown =	lqasc_shutdown,
++	.set_termios =	lqasc_set_termios,
++	.type =		lqasc_type,
++	.release_port =	lqasc_release_port,
++	.request_port =	lqasc_request_port,
++	.config_port =	lqasc_config_port,
++	.verify_port =	lqasc_verify_port,
++};
++
++static void
++lqasc_console_putchar(struct uart_port *port, int ch)
++{
++	int fifofree;
++
++	if (!port->membase)
++		return;
++
++	do {
++		fifofree = (lq_r32(port->membase + IFXMIPS_ASC_FSTAT)
++			& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
++	} while (fifofree == 0);
++	lq_w8(ch, port->membase + IFXMIPS_ASC_TBUF);
++}
++
++
++static void
++lqasc_console_write(struct console *co, const char *s, u_int count)
++{
++	struct lq_uart_port *ifx_port;
++	struct uart_port *port;
++	unsigned long flags;
++
++	if (co->index >= MAXPORTS)
++		return;
++
++	ifx_port = lqasc_port[co->index];
++	if (!ifx_port)
++		return;
++
++	port = &ifx_port->port;
++
++	local_irq_save(flags);
++	uart_console_write(port, s, count, lqasc_console_putchar);
++	local_irq_restore(flags);
++}
++
++static int __init
++lqasc_console_setup(struct console *co, char *options)
++{
++	struct lq_uart_port *ifx_port;
++	struct uart_port *port;
++	int baud = 115200;
++	int bits = 8;
++	int parity = 'n';
++	int flow = 'n';
++
++	if (co->index >= MAXPORTS)
++		return -ENODEV;
++
++	ifx_port = lqasc_port[co->index];
++	if (!ifx_port)
++		return -ENODEV;
++
++	port = &ifx_port->port;
++
++	port->uartclk = clk_get_rate(ifx_port->clk);
++
++	if (options)
++		uart_parse_options(options, &baud, &parity, &bits, &flow);
++	return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++static struct console lqasc_console = {
++	.name =		"ttyS",
++	.write =	lqasc_console_write,
++	.device =	uart_console_device,
++	.setup =	lqasc_console_setup,
++	.flags =	CON_PRINTBUFFER,
++	.index =	-1,
++	.data =		&lqasc_reg,
++};
++
++static int __init
++lqasc_console_init(void)
++{
++	register_console(&lqasc_console);
++	return 0;
++}
++console_initcall(lqasc_console_init);
++
++static struct uart_driver lqasc_reg = {
++	.owner =	THIS_MODULE,
++	.driver_name =	DRVNAME,
++	.dev_name =	"ttyS",
++	.major =	TTY_MAJOR,
++	.minor =	64,
++	.nr =		MAXPORTS,
++	.cons =		&lqasc_console,
++};
++
++static int __devinit
++lqasc_probe(struct platform_device *pdev)
++{
++	struct lq_uart_port *ifx_port;
++	struct uart_port *port;
++	struct resource *mmres, *irqres;
++	int tx_irq, rx_irq, err_irq;
++	struct clk *clk;
++	int ret;
++
++	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!mmres || !irqres)
++		return -ENODEV;
++
++	if (pdev->id >= MAXPORTS)
++		return -EBUSY;
++
++	if (lqasc_port[pdev->id] != NULL)
++		return -EBUSY;
++
++	clk = clk_get(&pdev->dev, "fpi");
++	if (IS_ERR(clk)) {
++		pr_err("failed to get fpi clk\n");
++		return -ENOENT;
++	}
++
++	tx_irq = platform_get_irq_byname(pdev, "tx");
++	if (tx_irq < 0) {
++		/* without named resources: assume standard irq scheme */
++		tx_irq = irqres->start;
++		rx_irq = irqres->start+2;
++		err_irq = irqres->start+3;
++	} else {
++		/* other irqs must be named also! */
++		rx_irq = platform_get_irq_byname(pdev, "rx");
++		err_irq = platform_get_irq_byname(pdev, "err");
++		if ((rx_irq < 0) | (err_irq < 0))
++			return -ENODEV;
++	}
++
++	ifx_port = kzalloc(sizeof(struct lq_uart_port), GFP_KERNEL);
++	if (!ifx_port)
++		return -ENOMEM;
++
++	port = &ifx_port->port;
++
++	port->iotype	= SERIAL_IO_MEM;
++	port->flags	= ASYNC_BOOT_AUTOCONF | UPF_IOREMAP;
++	port->ops	= &lqasc_pops;
++	port->fifosize	= 16;
++	port->type	= PORT_IFXMIPSASC,
++	port->line	= pdev->id;
++	port->dev	= &pdev->dev;
++
++	port->irq	= tx_irq; /* unused, just to be backward-compatibe */
++	port->mapbase	= mmres->start;
++
++	ifx_port->clk	= clk;
++
++	ifx_port->tx_irq = tx_irq;
++	ifx_port->rx_irq = rx_irq;
++	ifx_port->err_irq = err_irq;
++
++	lqasc_port[pdev->id] = ifx_port;
++	platform_set_drvdata(pdev, ifx_port);
++
++	ret = uart_add_one_port(&lqasc_reg, port);
++
++	return ret;
++}
++
++static int __devexit
++lqasc_remove(struct platform_device *pdev)
++{
++	struct lq_uart_port *ifx_port = platform_get_drvdata(pdev);
++	int ret;
++
++	clk_put(ifx_port->clk);
++	platform_set_drvdata(pdev, NULL);
++	lqasc_port[pdev->id] = NULL;
++	ret = uart_remove_one_port(&lqasc_reg, &ifx_port->port);
++	kfree(ifx_port);
++
++	return 0;
++}
++
++static struct platform_driver lqasc_driver = {
++	.probe		= lqasc_probe,
++	.remove		= __devexit_p(lqasc_remove),
++
++	.driver		= {
++		.name	= DRVNAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int __init
++init_lqasc(void)
++{
++	int ret;
++
++	ret = uart_register_driver(&lqasc_reg);
++	if (ret != 0)
++		return ret;
++
++	ret = platform_driver_register(&lqasc_driver);
++	if (ret != 0)
++		uart_unregister_driver(&lqasc_reg);
++
++	return ret;
++}
++
++void __exit
++exit_lqasc(void)
++{
++	platform_driver_unregister(&lqasc_driver);
++	uart_unregister_driver(&lqasc_reg);
++}
++
++module_init(init_lqasc);
++module_exit(exit_lqasc);
++
++MODULE_DESCRIPTION("Lantiq serial port driver");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/patches/210-nor.patch b/target/linux/lantiq/patches/210-nor.patch
new file mode 100644
index 0000000000..510ac6bdf3
--- /dev/null
+++ b/target/linux/lantiq/patches/210-nor.patch
@@ -0,0 +1,245 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -251,6 +251,12 @@
+ 	help
+ 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
+ 
++config MTD_LANTIQ
++	bool "Lantiq SoC NOR support"
++	depends on LANTIQ && MTD_PARTITIONS
++	help
++	  Support for NOR flsh chips on Lantiq SoC
++
+ config MTD_DILNETPC
+ 	tristate "CFI Flash device mapped on DIL/Net PC"
+ 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -59,3 +59,4 @@
+ obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
+ obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
+ obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
++obj-$(CONFIG_MTD_LANTIQ)  += lantiq.o
+--- /dev/null
++++ b/drivers/mtd/maps/lantiq.c
+@@ -0,0 +1,169 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/cfi.h>
++#include <linux/magic.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/physmap.h>
++
++#include <lantiq.h>
++#include <lantiq_platform.h>
++
++static map_word
++lq_read16(struct map_info *map, unsigned long adr)
++{
++	unsigned long flags;
++	map_word temp;
++	spin_lock_irqsave(&ebu_lock, flags);
++	adr ^= 2;
++	temp.x[0] = *((__u16 *)(map->virt + adr));
++	spin_unlock_irqrestore(&ebu_lock, flags);
++	return temp;
++}
++
++static void
++lq_write16(struct map_info *map, map_word d, unsigned long adr)
++{
++	unsigned long flags;
++	spin_lock_irqsave(&ebu_lock, flags);
++	adr ^= 2;
++	*((__u16 *)(map->virt + adr)) = d.x[0];
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
++void
++lq_copy_from(struct map_info *map, void *to,
++	unsigned long from, ssize_t len)
++{
++	unsigned char *p;
++	unsigned char *to_8;
++	unsigned long flags;
++	spin_lock_irqsave(&ebu_lock, flags);
++	from = (unsigned long)(from + map->virt);
++	p = (unsigned char *) from;
++	to_8 = (unsigned char *) to;
++	while (len--)
++		*to_8++ = *p++;
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
++void
++lq_copy_to(struct map_info *map, unsigned long to,
++	const void *from, ssize_t len)
++{
++	unsigned char *p =  (unsigned char *)from;
++	unsigned char *to_8;
++	unsigned long flags;
++	spin_lock_irqsave(&ebu_lock, flags);
++	to += (unsigned long) map->virt;
++	to_8 = (unsigned char *)to;
++	while (len--)
++		*p++ = *to_8++;
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
++static const char *part_probe_types[] = { "cmdlinepart", NULL };
++
++static struct map_info lq_map = {
++	.name = "lq_nor",
++	.bankwidth = 2,
++	.read = lq_read16,
++	.write = lq_write16,
++	.copy_from = lq_copy_from,
++	.copy_to = lq_copy_to,
++};
++
++static int
++lq_mtd_probe(struct platform_device *pdev)
++{
++	struct physmap_flash_data *lq_mtd_data =
++		(struct physmap_flash_data*) dev_get_platdata(&pdev->dev);
++	struct mtd_info *lq_mtd = NULL;
++	struct mtd_partition *parts = NULL;
++	struct resource *res = 0;
++	int nr_parts = 0;
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++	lq_w32(lq_r32(LQ_EBU_BUSCON0) & ~EBU_WRDIS, LQ_EBU_BUSCON0);
++#endif
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if(!res)
++	{
++		dev_err(&pdev->dev, "failed to get memory resource");
++		return -ENOENT;
++	}
++	res = request_mem_region(res->start, resource_size(res),
++		dev_name(&pdev->dev));
++	if(!res)
++	{
++		dev_err(&pdev->dev, "failed to request mem resource");
++		return -EBUSY;
++	}
++
++	lq_map.phys = res->start;
++	lq_map.size = resource_size(res);
++	lq_map.virt = ioremap_nocache(lq_map.phys, lq_map.size);
++
++	if (!lq_map.virt ) {
++		dev_err(&pdev->dev, "failed to ioremap!\n");
++		return -EIO;
++	}
++
++	lq_mtd = (struct mtd_info *) do_map_probe("cfi_probe", &lq_map);
++	if (!lq_mtd) {
++		iounmap(lq_map.virt);
++		dev_err(&pdev->dev, "probing failed\n");
++		return -ENXIO;
++	}
++
++	lq_mtd->owner = THIS_MODULE;
++
++	nr_parts = parse_mtd_partitions(lq_mtd, part_probe_types, &parts, 0);
++	if (nr_parts > 0) {
++		dev_info(&pdev->dev, "using %d partitions from cmdline", nr_parts);
++	} else {
++		nr_parts = lq_mtd_data->nr_parts;
++		parts = lq_mtd_data->parts;
++	}
++
++	add_mtd_partitions(lq_mtd, parts, nr_parts);
++	return 0;
++}
++
++static struct platform_driver lq_mtd_driver = {
++	.probe = lq_mtd_probe,
++	.driver = {
++		.name = "lq_nor",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init
++init_lq_mtd(void)
++{
++	int ret = platform_driver_register(&lq_mtd_driver);
++	if (ret)
++		printk(KERN_INFO "lq_nor: error registering platfom driver");
++	return ret;
++}
++
++module_init(init_lq_mtd);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Lantiq SoC NOR");
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -41,7 +41,11 @@
+ /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
+ 
+ // debugging, turns off buffer write mode if set to 1
+-#define FORCE_WORD_WRITE 0
++#ifdef CONFIG_LANTIQ
++#  define FORCE_WORD_WRITE 1
++#else
++#  define FORCE_WORD_WRITE 0
++#endif
+ 
+ /* Intel chips */
+ #define I82802AB	0x00ad
+@@ -1491,6 +1495,9 @@
+ 	int ret=0;
+ 
+ 	adr += chip->start;
++#ifdef CONFIG_LANTIQ
++	adr ^= 2;
++#endif
+ 
+ 	switch (mode) {
+ 	case FL_WRITING:
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,7 +40,11 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#ifdef CONFIG_LANTIQ
++#  define FORCE_WORD_WRITE 1
++#else
++#  define FORCE_WORD_WRITE 0
++#endif
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -1156,6 +1160,10 @@
+ 
+ 	adr += chip->start;
+ 
++#ifdef CONFIG_LANTIQ
++	adr ^= 2;
++#endif
++
+ 	mutex_lock(&chip->mutex);
+ 	ret = get_chip(map, chip, adr, FL_WRITING);
+ 	if (ret) {
diff --git a/target/linux/lantiq/patches/211-nor_split.patch b/target/linux/lantiq/patches/211-nor_split.patch
new file mode 100644
index 0000000000..2f77681b8c
--- /dev/null
+++ b/target/linux/lantiq/patches/211-nor_split.patch
@@ -0,0 +1,99 @@
+--- a/drivers/mtd/maps/lantiq.c
++++ b/drivers/mtd/maps/lantiq.c
+@@ -24,6 +24,10 @@
+ #include <lantiq.h>
+ #include <lantiq_platform.h>
+ 
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++#include <xway.h>
++#endif
++
+ static map_word
+ lq_read16(struct map_info *map, unsigned long adr)
+ {
+@@ -77,6 +81,75 @@ lq_copy_to(struct map_info *map, unsigne
+ 	spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+ 
++static unsigned long
++find_uImage_size(struct map_info *map, unsigned long offset)
++{
++#define UBOOT_MAGIC	0x56190527
++	unsigned long magic;
++	unsigned long temp;
++	map->copy_from(map, &magic, offset, 4);
++	if (le32_to_cpu(magic) != UBOOT_MAGIC)
++		return 0;
++	map->copy_from(map, &temp, offset + 12, 4);
++	return temp + 0x40;
++}
++
++static int
++detect_squashfs_partition(struct map_info *map, unsigned long offset)
++{
++	unsigned long temp;
++	map->copy_from(map, &temp, offset, 4);
++	return le32_to_cpu(temp) == SQUASHFS_MAGIC;
++}
++
++static struct mtd_partition split_partitions[] = {
++	{
++		.name = "kernel",
++		.offset = 0x0,
++		.size = 0x0,
++	}, {
++		.name = "rootfs",
++		.offset = 0x0,
++		.size = 0x0,
++	},
++};
++
++static int
++mtd_split_linux(struct map_info *map, struct mtd_info *mtd,
++	struct mtd_partition *parts, int nr_parts)
++{
++	int base_part = 0;
++	int i;
++	for (i = 0; i < nr_parts && !base_part; i++) {
++		if(!strcmp("linux", parts[i].name))
++			base_part = i;
++	}
++	if (!base_part)
++		return 0;
++	split_partitions[0].size = find_uImage_size(map, parts[base_part].offset);
++	if (!split_partitions[0].size) {
++		printk(KERN_INFO "lq_nor: no uImage found in linux partition");
++		return -1;
++	}
++	if (!detect_squashfs_partition(map,
++			parts[base_part].offset + split_partitions[0].size)) {
++		split_partitions[0].size &= ~(mtd->erasesize - 1);
++		split_partitions[0].size += mtd->erasesize;
++	}
++	split_partitions[0].offset = parts[base_part].offset;
++	split_partitions[1].offset =
++		parts[base_part].offset + split_partitions[0].size;
++	split_partitions[1].size =
++		parts[base_part].size - split_partitions[0].size;
++
++	base_part++;
++	add_mtd_partitions(mtd, parts, base_part);
++	add_mtd_partitions(mtd, split_partitions, 2);
++	if(nr_parts != base_part)
++		add_mtd_partitions(mtd, &parts[base_part], nr_parts - base_part);
++	return nr_parts + 2;
++}
++
+ static const char *part_probe_types[] = { "cmdlinepart", NULL };
+ 
+ static struct map_info lq_map = {
+@@ -142,7 +215,8 @@ lq_mtd_probe(struct platform_device *pde
+ 		parts = lq_mtd_data->parts;
+ 	}
+ 
+-	add_mtd_partitions(lq_mtd, parts, nr_parts);
++	if (!mtd_split_linux(&lq_map, lq_mtd, parts, nr_parts))
++		add_mtd_partitions(lq_mtd, parts, nr_parts);
+ 	return 0;
+ }
+ 
diff --git a/target/linux/lantiq/patches/230-xway_etop.patch b/target/linux/lantiq/patches/230-xway_etop.patch
new file mode 100644
index 0000000000..28955cf9ad
--- /dev/null
+++ b/target/linux/lantiq/patches/230-xway_etop.patch
@@ -0,0 +1,580 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -343,6 +343,12 @@ config MACB
+ 
+ source "drivers/net/arm/Kconfig"
+ 
++config LANTIQ_ETOP
++	tristate "Lantiq SoC ETOP driver"
++	depends on SOC_LANTIQ_XWAY
++	help
++	  Support for the MII0 inside the Lantiq SoC
++
+ config AX88796
+ 	tristate "ASIX AX88796 NE2000 clone support"
+ 	depends on ARM || MIPS || SUPERH
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -204,6 +204,7 @@ obj-$(CONFIG_SNI_82596) += sni_82596.o
+ obj-$(CONFIG_MVME16x_NET) += 82596.o
+ obj-$(CONFIG_BVME6000_NET) += 82596.o
+ obj-$(CONFIG_SC92031) += sc92031.o
++obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
+ 
+ # This is also a 82596 and should probably be merged
+ obj-$(CONFIG_LP486E) += lp486e.o
+--- /dev/null
++++ b/drivers/net/lantiq_etop.c
+@@ -0,0 +1,552 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify it
++ *   under the terms of the GNU General Public License version 2 as published
++ *   by the Free Software Foundation.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2005 Wu Qi Ming <Qi-Ming.Wu@infineon.com>
++ *   Copyright (C) 2008 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/uaccess.h>
++#include <linux/in.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/phy.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/skbuff.h>
++#include <linux/mm.h>
++#include <linux/platform_device.h>
++#include <linux/ethtool.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++
++#include <asm/checksum.h>
++
++#include <xway.h>
++#include <xway_dma.h>
++#include <lantiq_platform.h>
++
++#define ETHERNET_PACKET_DMA_BUFFER_SIZE		0x600
++#define LQ_PPE32_MEM_MAP		((u32 *)(LQ_PPE32_BASE_ADDR + 0x10000))
++#define LQ_PPE32_SRST		((u32 *)(LQ_PPE32_BASE_ADDR + 0x10080))
++
++/* mdio access */
++#define LQ_PPE32_MDIO_CFG		((u32 *)(LQ_PPE32_BASE_ADDR + 0x11800))
++#define LQ_PPE32_MDIO_ACC		((u32 *)(LQ_PPE32_BASE_ADDR + 0x11804))
++
++#define MDIO_ACC_REQUEST		0x80000000
++#define MDIO_ACC_READ			0x40000000
++#define MDIO_ACC_ADDR_MASK		0x1f
++#define MDIO_ACC_ADDR_OFFSET		0x15
++#define MDIO_ACC_REG_MASK		0x1f
++#define MDIO_ACC_REG_OFFSET		0x10
++#define MDIO_ACC_VAL_MASK		0xffff
++
++/* configuration */
++#define LQ_PPE32_CFG		((u32 *)(LQ_PPE32_MEM_MAP + 0x1808))
++
++#define PPE32_MII_MASK			0xfffffffc
++#define PPE32_MII_NORMAL		0x8
++#define PPE32_MII_REVERSE		0xe
++
++/* packet length */
++#define LQ_PPE32_IG_PLEN_CTRL	((u32 *)(LQ_PPE32_MEM_MAP + 0x1820))
++
++#define PPE32_PLEN_OVER			0x5ee
++#define PPE32_PLEN_UNDER		0x400000
++
++/* enet */
++#define LQ_PPE32_ENET_MAC_CFG	((u32 *)(LQ_PPE32_MEM_MAP + 0x1840))
++
++#define PPE32_CGEN			0x800
++
++struct lq_mii_priv {
++	struct net_device_stats stats;
++	struct dma_device_info *dma_device;
++	struct sk_buff *skb;
++
++	struct mii_bus *mii_bus;
++	struct phy_device *phydev;
++	int oldlink, oldspeed, oldduplex;
++};
++
++static struct net_device *lq_etop_dev;
++static unsigned char mac_addr[MAX_ADDR_LEN];
++
++static int lq_mdiobus_write(struct mii_bus *bus, int phy_addr,
++				int phy_reg, u16 phy_data)
++{
++	u32 val = MDIO_ACC_REQUEST |
++		((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
++		((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET) |
++		phy_data;
++
++	while (lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST)
++		;
++	lq_w32(val, LQ_PPE32_MDIO_ACC);
++
++	return 0;
++}
++
++static int lq_mdiobus_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++	u32 val = MDIO_ACC_REQUEST | MDIO_ACC_READ |
++		((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
++		((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET);
++
++	while (lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST)
++		;
++	lq_w32(val, LQ_PPE32_MDIO_ACC);
++	while (lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST)
++		;
++	val = lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_VAL_MASK;
++	return val;
++}
++
++int lq_mii_open(struct net_device *dev)
++{
++	struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
++	struct dma_device_info *dma_dev = priv->dma_device;
++	int i;
++
++	for (i = 0; i < dma_dev->max_rx_chan_num; i++) {
++		if ((dma_dev->rx_chan[i])->control == LQ_DMA_CH_ON)
++			(dma_dev->rx_chan[i])->open(dma_dev->rx_chan[i]);
++	}
++	netif_start_queue(dev);
++	return 0;
++}
++
++int lq_mii_release(struct net_device *dev)
++{
++	struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
++	struct dma_device_info *dma_dev = priv->dma_device;
++	int i;
++
++	for (i = 0; i < dma_dev->max_rx_chan_num; i++)
++		dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]);
++	netif_stop_queue(dev);
++	return 0;
++}
++
++int lq_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
++{
++	struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
++	unsigned char *buf = NULL;
++	struct sk_buff *skb = NULL;
++	int len = 0;
++
++	len = dma_device_read(dma_dev, &buf, (void **)&skb);
++
++	if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE) {
++		printk(KERN_INFO "lq_etop: packet too large %d\n", len);
++		goto lq_mii_hw_receive_err_exit;
++	}
++
++	/* remove CRC */
++	len -= 4;
++	if (skb == NULL) {
++		printk(KERN_INFO "lq_etop: cannot restore pointer\n");
++		goto lq_mii_hw_receive_err_exit;
++	}
++
++	if (len > (skb->end - skb->tail)) {
++		printk(KERN_INFO "lq_etop: BUG, len:%d end:%p tail:%p\n",
++			(len+4), skb->end, skb->tail);
++		goto lq_mii_hw_receive_err_exit;
++	}
++
++	skb_put(skb, len);
++	skb->dev = dev;
++	skb->protocol = eth_type_trans(skb, dev);
++	netif_rx(skb);
++
++	priv->stats.rx_packets++;
++	priv->stats.rx_bytes += len;
++	return 0;
++
++lq_mii_hw_receive_err_exit:
++	if (len == 0) {
++		if (skb)
++			dev_kfree_skb_any(skb);
++		priv->stats.rx_errors++;
++		priv->stats.rx_dropped++;
++		return -EIO;
++	} else {
++		return len;
++	}
++}
++
++int lq_mii_hw_tx(char *buf, int len, struct net_device *dev)
++{
++	int ret = 0;
++	struct lq_mii_priv *priv = netdev_priv(dev);
++	struct dma_device_info *dma_dev = priv->dma_device;
++	ret = dma_device_write(dma_dev, buf, len, priv->skb);
++	return ret;
++}
++
++int lq_mii_tx(struct sk_buff *skb, struct net_device *dev)
++{
++	int len;
++	char *data;
++	struct lq_mii_priv *priv = netdev_priv(dev);
++	struct dma_device_info *dma_dev = priv->dma_device;
++
++	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
++	data = skb->data;
++	priv->skb = skb;
++	dev->trans_start = jiffies;
++	/* TODO: we got more than 1 dma channel,
++	   so we should do something intelligent here to select one */
++	dma_dev->current_tx_chan = 0;
++
++	wmb();
++
++	if (lq_mii_hw_tx(data, len, dev) != len) {
++		dev_kfree_skb_any(skb);
++		priv->stats.tx_errors++;
++		priv->stats.tx_dropped++;
++	} else {
++		priv->stats.tx_packets++;
++		priv->stats.tx_bytes += len;
++	}
++
++	return 0;
++}
++
++void lq_mii_tx_timeout(struct net_device *dev)
++{
++	int i;
++	struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
++
++	priv->stats.tx_errors++;
++	for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
++		priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]);
++	netif_wake_queue(dev);
++	return;
++}
++
++int dma_intr_handler(struct dma_device_info *dma_dev, int status)
++{
++	int i;
++
++	switch (status) {
++	case RCV_INT:
++		lq_mii_hw_receive(lq_etop_dev, dma_dev);
++		break;
++
++	case TX_BUF_FULL_INT:
++		printk(KERN_INFO "lq_etop: tx buffer full\n");
++		netif_stop_queue(lq_etop_dev);
++		for (i = 0; i < dma_dev->max_tx_chan_num; i++) {
++			if ((dma_dev->tx_chan[i])->control == LQ_DMA_CH_ON)
++				dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]);
++		}
++		break;
++
++	case TRANSMIT_CPT_INT:
++		for (i = 0; i < dma_dev->max_tx_chan_num; i++)
++			dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]);
++
++		netif_wake_queue(lq_etop_dev);
++		break;
++	}
++
++	return 0;
++}
++
++unsigned char *lq_etop_dma_buffer_alloc(int len, int *byte_offset, void **opt)
++{
++	unsigned char *buffer = NULL;
++	struct sk_buff *skb = NULL;
++
++	skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
++	if (skb == NULL)
++		return NULL;
++
++	buffer = (unsigned char *)(skb->data);
++	skb_reserve(skb, 2);
++	*(int *)opt = (int)skb;
++	*byte_offset = 2;
++
++	return buffer;
++}
++
++void lq_etop_dma_buffer_free(unsigned char *dataptr, void *opt)
++{
++	struct sk_buff *skb = NULL;
++
++	if (opt == NULL) {
++		kfree(dataptr);
++	} else {
++		skb = (struct sk_buff *)opt;
++		dev_kfree_skb_any(skb);
++	}
++}
++
++static void
++lq_adjust_link(struct net_device *dev)
++{
++	struct lq_mii_priv *priv = netdev_priv(dev);
++	struct phy_device *phydev = priv->phydev;
++	int new_state = 0;
++
++	/* Did anything change? */
++	if (priv->oldlink != phydev->link ||
++		priv->oldduplex != phydev->duplex ||
++		priv->oldspeed != phydev->speed) {
++		/* Yes, so update status and mark as changed */
++		new_state = 1;
++		priv->oldduplex = phydev->duplex;
++		priv->oldspeed = phydev->speed;
++		priv->oldlink = phydev->link;
++	}
++
++	/* If link status changed, show new status */
++	if (new_state)
++		phy_print_status(phydev);
++}
++
++static int mii_probe(struct net_device *dev)
++{
++	struct lq_mii_priv *priv = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	int phy_addr;
++
++	priv->oldlink = 0;
++	priv->oldspeed = 0;
++	priv->oldduplex = -1;
++
++	/* find the first (lowest address) PHY on the current MAC's MII bus */
++	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++		if (priv->mii_bus->phy_map[phy_addr]) {
++			phydev = priv->mii_bus->phy_map[phy_addr];
++			break; /* break out with first one found */
++		}
++	}
++
++	if (!phydev) {
++		printk (KERN_ERR "%s: no PHY found\n", dev->name);
++		return -ENODEV;
++	}
++
++	/* now we are supposed to have a proper phydev, to attach to... */
++	BUG_ON(!phydev);
++	BUG_ON(phydev->attached_dev);
++
++	phydev = phy_connect(dev, dev_name(&phydev->dev), &lq_adjust_link,
++			0, PHY_INTERFACE_MODE_MII);
++
++	if (IS_ERR(phydev)) {
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		return PTR_ERR(phydev);
++	}
++
++	/* mask with MAC supported features */
++	phydev->supported &= (SUPPORTED_10baseT_Half
++			      | SUPPORTED_10baseT_Full
++			      | SUPPORTED_100baseT_Half
++			      | SUPPORTED_100baseT_Full
++			      | SUPPORTED_Autoneg
++			      /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
++			      | SUPPORTED_MII
++			      | SUPPORTED_TP);
++
++	phydev->advertising = phydev->supported;
++
++	priv->phydev = phydev;
++
++	printk(KERN_INFO "%s: attached PHY driver [%s] "
++	       "(mii_bus:phy_addr=%s, irq=%d)\n",
++	       dev->name, phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
++
++	return 0;
++}
++
++
++static int lq_mii_dev_init(struct net_device *dev)
++{
++	int i;
++	struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
++	ether_setup(dev);
++	dev->watchdog_timeo = 10 * HZ;
++	dev->mtu = 1500;
++	memset(priv, 0, sizeof(struct lq_mii_priv));
++	priv->dma_device = dma_device_reserve("PPE");
++	if (!priv->dma_device) {
++		BUG();
++		return -ENODEV;
++	}
++	priv->dma_device->buffer_alloc = &lq_etop_dma_buffer_alloc;
++	priv->dma_device->buffer_free = &lq_etop_dma_buffer_free;
++	priv->dma_device->intr_handler = &dma_intr_handler;
++	priv->dma_device->max_rx_chan_num = 4;
++
++	for (i = 0; i < priv->dma_device->max_rx_chan_num; i++) {
++		priv->dma_device->rx_chan[i]->packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
++		priv->dma_device->rx_chan[i]->control = LQ_DMA_CH_ON;
++	}
++
++	for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
++		if (i == 0)
++			priv->dma_device->tx_chan[i]->control = LQ_DMA_CH_ON;
++		else
++			priv->dma_device->tx_chan[i]->control = LQ_DMA_CH_OFF;
++
++	dma_device_register(priv->dma_device);
++
++	printk(KERN_INFO "%s: using mac=", dev->name);
++	for (i = 0; i < 6; i++) {
++		dev->dev_addr[i] = mac_addr[i];
++		printk("%02X%c", dev->dev_addr[i], (i == 5) ? ('\n') : (':'));
++	}
++
++	priv->mii_bus = mdiobus_alloc();
++	if (priv->mii_bus == NULL)
++		return -ENOMEM;
++
++	priv->mii_bus->priv = dev;
++	priv->mii_bus->read = lq_mdiobus_read;
++	priv->mii_bus->write = lq_mdiobus_write;
++	priv->mii_bus->name = "lq_mii";
++	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
++	priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
++	for(i = 0; i < PHY_MAX_ADDR; ++i)
++		priv->mii_bus->irq[i] = PHY_POLL;
++
++	mdiobus_register(priv->mii_bus);
++
++	return mii_probe(dev);
++}
++
++static void lq_mii_chip_init(int mode)
++{
++	lq_pmu_enable(PMU_DMA);
++	lq_pmu_enable(PMU_PPE);
++
++	if (mode == REV_MII_MODE)
++		lq_w32_mask(PPE32_MII_MASK, PPE32_MII_REVERSE, LQ_PPE32_CFG);
++	else if (mode == MII_MODE)
++		lq_w32_mask(PPE32_MII_MASK, PPE32_MII_NORMAL, LQ_PPE32_CFG);
++	lq_w32(PPE32_PLEN_UNDER | PPE32_PLEN_OVER, LQ_PPE32_IG_PLEN_CTRL);
++	lq_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
++	wmb();
++}
++
++static int lq_mii_eth_mac_addr(struct net_device *dev, void *p)
++{
++	int retcode;
++
++	retcode = eth_mac_addr(dev, p);
++
++	if (retcode)
++		return retcode;
++
++	// set rx_addr for unicast filter
++	lq_w32(((dev->dev_addr[0]<<24)|(dev->dev_addr[1]<<16)|(dev->dev_addr[2]<< 8)|dev->dev_addr[3]), (u32*)(LQ_PPE32_BASE_ADDR|(0x461b<<2)));
++	lq_w32(((dev->dev_addr[4]<<24)|(dev->dev_addr[5]<<16)), (u32*)(LQ_PPE32_BASE_ADDR|(0x461c<<2)));
++
++	return 0;
++}
++
++static void lq_mii_set_rx_mode (struct net_device *dev)
++{
++	// rx_mode promisc: unset unicast filter
++	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI))
++		lq_w32(lq_r32((u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2))) & ~(1<<28), (u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2)));
++	// enable unicast filter
++	else
++		lq_w32(lq_r32((u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2))) | (1<<28), (u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2)));
++}
++
++static const struct net_device_ops lq_eth_netdev_ops = {
++	.ndo_init				= lq_mii_dev_init,
++	.ndo_open				= lq_mii_open,
++	.ndo_stop				= lq_mii_release,
++	.ndo_start_xmit			= lq_mii_tx,
++	.ndo_tx_timeout			= lq_mii_tx_timeout,
++	.ndo_change_mtu			= eth_change_mtu,
++	.ndo_set_mac_address	= lq_mii_eth_mac_addr,
++	.ndo_validate_addr		= eth_validate_addr,
++	.ndo_set_multicast_list	= lq_mii_set_rx_mode,
++};
++
++static int
++lq_mii_probe(struct platform_device *dev)
++{
++	int result = 0;
++	struct lq_eth_data *eth = (struct lq_eth_data*)dev->dev.platform_data;
++	lq_etop_dev = alloc_etherdev(sizeof(struct lq_mii_priv));
++	lq_etop_dev->netdev_ops = &lq_eth_netdev_ops;
++	memcpy(mac_addr, eth->mac, 6);
++	strcpy(lq_etop_dev->name, "eth%d");
++	lq_mii_chip_init(eth->mii_mode);
++	result = register_netdev(lq_etop_dev);
++	if (result) {
++		printk(KERN_INFO "lq_etop: error %i registering device \"%s\"\n", result, lq_etop_dev->name);
++		goto out;
++	}
++
++	printk(KERN_INFO "lq_etop: driver loaded!\n");
++
++out:
++	return result;
++}
++
++static int lq_mii_remove(struct platform_device *dev)
++{
++	struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(lq_etop_dev);
++
++	printk(KERN_INFO "lq_etop: lq_etop cleanup\n");
++
++	dma_device_unregister(priv->dma_device);
++	dma_device_release(priv->dma_device);
++	kfree(priv->dma_device);
++	unregister_netdev(lq_etop_dev);
++	return 0;
++}
++
++static struct platform_driver lq_mii_driver = {
++	.probe = lq_mii_probe,
++	.remove = lq_mii_remove,
++	.driver = {
++		.name = "lq_etop",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init lq_mii_init(void)
++{
++	int ret = platform_driver_register(&lq_mii_driver);
++	if (ret)
++		printk(KERN_INFO "lq_etop: Error registering platfom driver!");
++	return ret;
++}
++
++static void __exit lq_mii_cleanup(void)
++{
++	platform_driver_unregister(&lq_mii_driver);
++}
++
++module_init(lq_mii_init);
++module_exit(lq_mii_cleanup);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("ethernet driver for IFXMIPS boards");
diff --git a/target/linux/lantiq/patches/250-watchdog.patch b/target/linux/lantiq/patches/250-watchdog.patch
new file mode 100644
index 0000000000..f86ff71868
--- /dev/null
+++ b/target/linux/lantiq/patches/250-watchdog.patch
@@ -0,0 +1,246 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -840,6 +840,12 @@ config TXX9_WDT
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
++config LANTIQ_WDT
++	bool "Lantiq SoC watchdog"
++	depends on LANTIQ
++	help
++	  Hardware driver for the Lantiq SoC Watchdog Timer.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -112,6 +112,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
+ 
+ # PARISC Architecture
+ 
+--- /dev/null
++++ b/drivers/watchdog/lantiq_wdt.c
+@@ -0,0 +1,218 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ *  Based on EP93xx wdt driver
++ */
++
++#include <linux/module.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/platform_device.h>
++#include <linux/uaccess.h>
++#include <linux/clk.h>
++
++#include <lantiq.h>
++
++#define LQ_WDT_PW1			0x00BE0000
++#define LQ_WDT_PW2			0x00DC0000
++
++#define LQ_BIU_WDT_CR		0x3F0
++#define LQ_BIU_WDT_SR		0x3F8
++
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++static int wdt_ok_to_close;
++#endif
++
++static int wdt_timeout = 30;
++static __iomem void *wdt_membase = NULL;
++static unsigned long io_region_clk = 0;
++
++static int
++lq_wdt_enable(unsigned int timeout)
++{
++/*	printk("%s:%s[%d] %08X\n",
++		__FILE__, __func__, __LINE__,
++		lq_r32(wdt_membase + LQ_BIU_WDT_SR));
++	if(!lq_r32(wdt_membase + LQ_BIU_WDT_SR))
++	{
++*/	lq_w32(LQ_WDT_PW1, wdt_membase + LQ_BIU_WDT_CR);
++	lq_w32(LQ_WDT_PW2 |
++		(0x3 << 26) | /* PWL */
++		(0x3 << 24) | /* CLKDIV */
++		(0x1 << 31) | /* enable */
++		((timeout * (io_region_clk / 0x40000)) + 0x1000), /* reload */
++			wdt_membase + LQ_BIU_WDT_CR);
++//	}
++	return 0;
++}
++
++static void
++lq_wdt_disable(void)
++{
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++	wdt_ok_to_close = 0;
++#endif
++	lq_w32(LQ_WDT_PW1, wdt_membase + LQ_BIU_WDT_CR);
++	lq_w32(LQ_WDT_PW2, wdt_membase+ LQ_BIU_WDT_CR);
++}
++
++static ssize_t
++lq_wdt_write(struct file *file, const char __user *data,
++		size_t len, loff_t *ppos)
++{
++	size_t i;
++
++	if (!len)
++		return 0;
++
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++	for (i = 0; i != len; i++) {
++		char c;
++		if (get_user(c, data + i))
++			return -EFAULT;
++		if (c == 'V')
++			wdt_ok_to_close = 1;
++	}
++#endif
++	lq_wdt_enable(wdt_timeout);
++	return len;
++}
++
++static struct watchdog_info ident = {
++	.options = WDIOF_MAGICCLOSE,
++	.identity = "lq_wdt",
++};
++
++static int
++lq_wdt_ioctl(struct inode *inode, struct file *file,
++		unsigned int cmd, unsigned long arg)
++{
++	int ret = -ENOTTY;
++
++	switch (cmd) {
++	case WDIOC_GETSUPPORT:
++		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
++				sizeof(ident)) ? -EFAULT : 0;
++		break;
++
++	case WDIOC_GETTIMEOUT:
++		ret = put_user(wdt_timeout, (int __user *)arg);
++		break;
++
++	case WDIOC_SETTIMEOUT:
++		ret = get_user(wdt_timeout, (int __user *)arg);
++		break;
++
++	case WDIOC_KEEPALIVE:
++		lq_wdt_enable(wdt_timeout);
++		ret = 0;
++		break;
++	}
++	return ret;
++}
++
++static int
++lq_wdt_open(struct inode *inode, struct file *file)
++{
++	lq_wdt_enable(wdt_timeout);
++	return nonseekable_open(inode, file);
++}
++
++static int
++lq_wdt_release(struct inode *inode, struct file *file)
++{
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++	if (wdt_ok_to_close)
++		lq_wdt_disable();
++	else
++#endif
++		printk(KERN_ERR "lq_wdt: watchdog closed without warning,"
++			" rebooting system\n");
++	return 0;
++}
++
++static const struct file_operations lq_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.write		= lq_wdt_write,
++	.ioctl		= lq_wdt_ioctl,
++	.open		= lq_wdt_open,
++	.release	= lq_wdt_release,
++};
++
++static struct miscdevice lq_wdt_miscdev = {
++	.minor		= WATCHDOG_MINOR,
++	.name		= "watchdog",
++	.fops		= &lq_wdt_fops,
++};
++
++static int
++lq_wdt_probe(struct platform_device *pdev)
++{
++	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	struct clk *clk;
++	int ret = 0;
++	if(!res)
++		return -ENOENT;
++	res = request_mem_region(res->start, resource_size(res),
++		dev_name(&pdev->dev));
++	if(!res)
++		return -EBUSY;
++	wdt_membase = ioremap_nocache(res->start, resource_size(res));
++	if(!wdt_membase)
++	{
++		ret = -ENOMEM;
++		goto err_release_mem_region;
++	}
++	clk = clk_get(&pdev->dev, "io");
++	io_region_clk = clk_get_rate(clk);;
++	ret = misc_register(&lq_wdt_miscdev);
++	if(!ret)
++		return 0;
++
++	iounmap(wdt_membase);
++err_release_mem_region:
++	release_mem_region(res->start, resource_size(res));
++	return ret;
++}
++
++static int
++lq_wdt_remove(struct platform_device *dev)
++{
++	lq_wdt_disable();
++	misc_deregister(&lq_wdt_miscdev);
++	return 0;
++}
++
++static struct platform_driver lq_wdt_driver = {
++	.probe = lq_wdt_probe,
++	.remove = lq_wdt_remove,
++	.driver = {
++		.name = "lq_wdt",
++		.owner = THIS_MODULE,
++	},
++};
++
++static int __init
++init_lq_wdt(void)
++{
++	return platform_driver_register(&lq_wdt_driver);
++}
++
++static void __exit
++exit_lq_wdt(void)
++{
++	platform_driver_unregister(&lq_wdt_driver);
++}
++
++module_init(init_lq_wdt);
++module_exit(exit_lq_wdt);
++
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("ifxmips Watchdog");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/lantiq/patches/260-pci.patch b/target/linux/lantiq/patches/260-pci.patch
new file mode 100644
index 0000000000..d086b25e8b
--- /dev/null
+++ b/target/linux/lantiq/patches/260-pci.patch
@@ -0,0 +1,436 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capc
+ obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
+ obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+ obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
++obj-$(CONFIG_LANTIQ)			+= pci-lantiq.o ops-lantiq.o
+ 
+ ifdef CONFIG_PCI_MSI
+ obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
+--- /dev/null
++++ b/arch/mips/pci/ops-lantiq.c
+@@ -0,0 +1,127 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <asm/addrspace.h>
++#include <linux/vmalloc.h>
++
++#include <xway.h>
++
++#define LQ_PCI_CFG_BUSNUM_SHF 16
++#define LQ_PCI_CFG_DEVNUM_SHF 11
++#define LQ_PCI_CFG_FUNNUM_SHF 8
++
++#define PCI_ACCESS_READ  0
++#define PCI_ACCESS_WRITE 1
++
++extern u32 lq_pci_mapped_cfg;
++
++static int
++lq_pci_config_access(unsigned char access_type,
++		struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
++{
++	unsigned long cfg_base;
++	unsigned long flags;
++
++	u32 temp;
++
++	/* we support slot from 0 to 15 */
++	/* dev_fn 0&0x68 (AD29) is ifxmips itself */
++	if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
++			|| ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
++		return 1;
++
++	spin_lock_irqsave(&ebu_lock, flags);
++
++	cfg_base = lq_pci_mapped_cfg;
++	cfg_base |= (bus->number << LQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
++			LQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
++
++	/* Perform access */
++	if (access_type == PCI_ACCESS_WRITE)
++	{
++#ifdef CONFIG_SWAP_IO_SPACE
++		lq_w32(swab32(*data), ((u32*)cfg_base));
++#else
++		lq_w32(*data, ((u32*)cfg_base));
++#endif
++	} else {
++		*data = lq_r32(((u32*)(cfg_base)));
++#ifdef CONFIG_SWAP_IO_SPACE
++		*data = swab32(*data);
++#endif
++	}
++	wmb();
++
++	/* clean possible Master abort */
++	cfg_base = (lq_pci_mapped_cfg | (0x0 << LQ_PCI_CFG_FUNNUM_SHF)) + 4;
++	temp = lq_r32(((u32*)(cfg_base)));
++#ifdef CONFIG_SWAP_IO_SPACE
++	temp = swab32 (temp);
++#endif
++	cfg_base = (lq_pci_mapped_cfg | (0x68 << LQ_PCI_CFG_FUNNUM_SHF)) + 4;
++	lq_w32(temp, ((u32*)cfg_base));
++
++	spin_unlock_irqrestore(&ebu_lock, flags);
++
++	if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
++		return 1;
++
++	return 0;
++}
++
++int
++lq_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
++		int where, int size, u32 * val)
++{
++	u32 data = 0;
++
++	if (lq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	if (size == 1)
++		*val = (data >> ((where & 3) << 3)) & 0xff;
++	else if (size == 2)
++		*val = (data >> ((where & 3) << 3)) & 0xffff;
++	else
++		*val = data;
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++int
++lq_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
++		int where, int size, u32 val)
++{
++	u32 data = 0;
++
++	if (size == 4)
++	{
++		data = val;
++	} else {
++		if (lq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
++			return PCIBIOS_DEVICE_NOT_FOUND;
++
++		if (size == 1)
++			data = (data & ~(0xff << ((where & 3) << 3))) |
++				(val << ((where & 3) << 3));
++		else if (size == 2)
++			data = (data & ~(0xffff << ((where & 3) << 3))) |
++				(val << ((where & 3) << 3));
++	}
++
++	if (lq_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	return PCIBIOS_SUCCESSFUL;
++}
+--- /dev/null
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -0,0 +1,293 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/vmalloc.h>
++#include <linux/platform_device.h>
++
++#include <asm/gpio.h>
++#include <asm/addrspace.h>
++
++#include <xway.h>
++#include <xway_irq.h>
++#include <lantiq_platform.h>
++
++#define LQ_PCI_CFG_BASE		0x17000000
++#define LQ_PCI_CFG_SIZE		0x00008000
++#define LQ_PCI_MEM_BASE		0x18000000
++#define LQ_PCI_MEM_SIZE		0x02000000
++#define LQ_PCI_IO_BASE		0x1AE00000
++#define LQ_PCI_IO_SIZE		0x00200000
++
++#define PCI_CR_FCI_ADDR_MAP0		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C0))
++#define PCI_CR_FCI_ADDR_MAP1		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C4))
++#define PCI_CR_FCI_ADDR_MAP2		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C8))
++#define PCI_CR_FCI_ADDR_MAP3		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00CC))
++#define PCI_CR_FCI_ADDR_MAP4		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D0))
++#define PCI_CR_FCI_ADDR_MAP5		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D4))
++#define PCI_CR_FCI_ADDR_MAP6		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D8))
++#define PCI_CR_FCI_ADDR_MAP7		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00DC))
++#define PCI_CR_CLK_CTRL			((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0000))
++#define PCI_CR_PCI_MOD			((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0030))
++#define PCI_CR_PC_ARB			((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0080))
++#define PCI_CR_FCI_ADDR_MAP11hg		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E4))
++#define PCI_CR_BAR11MASK		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0044))
++#define PCI_CR_BAR12MASK		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0048))
++#define PCI_CR_BAR13MASK		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x004C))
++#define PCI_CS_BASE_ADDR1		((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0010))
++#define PCI_CR_PCI_ADDR_MAP11		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0064))
++#define PCI_CR_FCI_BURST_LENGTH		((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E8))
++#define PCI_CR_PCI_EOI			((u32 *)(PCI_CR_PR_BASE_ADDR + 0x002C))
++
++
++#define PCI_CS_STS_CMD			((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0004))
++
++#define PCI_MASTER0_REQ_MASK_2BITS	8
++#define PCI_MASTER1_REQ_MASK_2BITS	10
++#define PCI_MASTER2_REQ_MASK_2BITS	12
++#define INTERNAL_ARB_ENABLE_BIT		0
++
++#define LQ_CGU_IFCCR		((u32 *)(LQ_CGU_BASE_ADDR + 0x0018))
++#define LQ_CGU_PCICR		((u32 *)(LQ_CGU_BASE_ADDR + 0x0034))
++
++extern int lq_pci_read_config_dword(struct pci_bus *bus,
++	unsigned int devfn, int where, int size, u32 *val);
++extern int lq_pci_write_config_dword(struct pci_bus *bus,
++	unsigned int devfn, int where, int size, u32 val);
++
++u32 lq_pci_mapped_cfg;
++
++/* Since the PCI REQ pins can be reused for other functionality, make it possible
++   to exclude those from interpretation by the PCI controller */
++static int lq_pci_req_mask = 0xf;
++
++struct pci_ops lq_pci_ops =
++{
++	.read = lq_pci_read_config_dword,
++	.write = lq_pci_write_config_dword
++};
++
++static struct resource pci_io_resource =
++{
++	.name = "pci io space",
++	.start = LQ_PCI_IO_BASE,
++	.end = LQ_PCI_IO_BASE + LQ_PCI_IO_SIZE - 1,
++	.flags = IORESOURCE_IO
++};
++
++static struct resource pci_mem_resource =
++{
++	.name = "pci memory space",
++	.start = LQ_PCI_MEM_BASE,
++	.end = LQ_PCI_MEM_BASE + LQ_PCI_MEM_SIZE - 1,
++	.flags = IORESOURCE_MEM
++};
++
++static struct pci_controller lq_pci_controller =
++{
++	.pci_ops = &lq_pci_ops,
++	.mem_resource = &pci_mem_resource,
++	.mem_offset	= 0x00000000UL,
++	.io_resource = &pci_io_resource,
++	.io_offset	= 0x00000000UL,
++};
++
++int
++pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	u8 pin;
++
++	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
++	switch(pin)
++	{
++		case 0:
++			break;
++		case 1:
++			//falling edge level triggered:0x4, low level:0xc, rising edge:0x2
++			lq_w32(lq_r32(LQ_EBU_PCC_CON) | 0xc, LQ_EBU_PCC_CON);
++			lq_w32(lq_r32(LQ_EBU_PCC_IEN) | 0x10, LQ_EBU_PCC_IEN);
++			break;
++		case 2:
++		case 3:
++		case 4:
++			printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
++		default:
++			printk ("WARNING: invalid interrupt pin %d\n", pin);
++			return 1;
++	}
++	return 0;
++}
++
++static u32
++lq_calc_bar11mask(void)
++{
++	u32 mem, bar11mask;
++
++	/* BAR11MASK value depends on available memory on system. */
++	mem = num_physpages * PAGE_SIZE;
++	bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) -1)) -1)) | 8;
++
++	return bar11mask;
++}
++
++static void
++lq_pci_setup_clk(int external_clock)
++{
++	/* set clock to 33Mhz */
++	lq_w32(lq_r32(LQ_CGU_IFCCR) & ~0xf00000, LQ_CGU_IFCCR);
++	lq_w32(lq_r32(LQ_CGU_IFCCR) | 0x800000,	LQ_CGU_IFCCR);
++	if (external_clock)
++	{
++		lq_w32(lq_r32(LQ_CGU_IFCCR) & ~(1 << 16), LQ_CGU_IFCCR);
++		lq_w32((1 << 30), LQ_CGU_PCICR);
++	} else {
++		lq_w32(lq_r32(LQ_CGU_IFCCR) | (1 << 16), LQ_CGU_IFCCR);
++		lq_w32((1 << 31) | (1 << 30), LQ_CGU_PCICR);
++	}
++}
++
++static void
++lq_pci_setup_gpio(void)
++{
++	/* PCI reset line is gpio driven */
++	lq_gpio_request(21, 0, 0, 1, "pci-reset");
++
++	/* PCI_REQ line */
++	lq_gpio_request(29, 1, 0, 0, "pci-req");
++
++	/* PCI_GNT line */
++	lq_gpio_request(30, 1, 0, 1, "pci-gnt");
++}
++
++static int __init
++lq_pci_startup(void)
++{
++	u32 temp_buffer;
++
++	/* setup pci clock and gpis used by pci */
++	lq_pci_setup_gpio();
++
++	/* enable auto-switching between PCI and EBU */
++	lq_w32(0xa, PCI_CR_CLK_CTRL);
++
++	/* busy, i.e. configuration is not done, PCI access has to be retried */
++	lq_w32(lq_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
++	wmb ();
++	/* BUS Master/IO/MEM access */
++	lq_w32(lq_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
++
++	/* enable external 2 PCI masters */
++	temp_buffer = lq_r32(PCI_CR_PC_ARB);
++	temp_buffer &= (~(lq_pci_req_mask << 16));
++	/* enable internal arbiter */
++	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
++	/* enable internal PCI master reqest */
++	temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
++
++	/* enable EBU request */
++	temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
++
++	/* enable all external masters request */
++	temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
++	lq_w32(temp_buffer, PCI_CR_PC_ARB);
++	wmb ();
++
++	/* setup BAR memory regions */
++	lq_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
++	lq_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
++	lq_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
++	lq_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
++	lq_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
++	lq_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
++	lq_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
++	lq_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
++	lq_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
++	lq_w32(lq_calc_bar11mask(), PCI_CR_BAR11MASK);
++	lq_w32(0, PCI_CR_PCI_ADDR_MAP11);
++	lq_w32(0, PCI_CS_BASE_ADDR1);
++#ifdef CONFIG_SWAP_IO_SPACE
++	/* both TX and RX endian swap are enabled */
++	lq_w32(lq_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
++	wmb ();
++#endif
++	/*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
++	lq_w32(lq_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
++	lq_w32(lq_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
++	/*use 8 dw burst length */
++	lq_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
++	lq_w32(lq_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
++	wmb();
++
++	/* toggle reset pin */
++	__gpio_set_value(21, 0);
++	wmb();
++	mdelay(1);
++	__gpio_set_value(21, 1);
++	return 0;
++}
++
++int __init
++pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
++	switch(slot)
++	{
++		case 13:
++			/* IDSEL = AD29 --> USB Host Controller */
++			return (INT_NUM_IM1_IRL0 + 17);
++		case 14:
++			/* IDSEL = AD30 --> mini PCI connector */
++			return (INT_NUM_IM0_IRL0 + 22);
++		default:
++			printk("lq_pci: no IRQ found for slot %d, pin %d\n", slot, pin);
++			return 0;
++	}
++}
++
++static int
++lq_pci_probe(struct platform_device *pdev)
++{
++	struct lq_pci_data *lq_pci_data = (struct lq_pci_data*) pdev->dev.platform_data;
++	extern int pci_probe_only;
++
++	pci_probe_only = 0;
++	lq_pci_req_mask = lq_pci_data->req_mask;
++	lq_pci_setup_clk(lq_pci_data->clock);
++
++	lq_pci_startup();
++	lq_pci_mapped_cfg =
++		(u32)ioremap_nocache(LQ_PCI_CFG_BASE, LQ_PCI_CFG_BASE);
++	lq_pci_controller.io_map_base =
++		(unsigned long)ioremap(LQ_PCI_IO_BASE, LQ_PCI_IO_SIZE - 1);
++
++	register_pci_controller(&lq_pci_controller);
++	return 0;
++}
++
++static struct platform_driver
++lq_pci_driver = {
++	.probe = lq_pci_probe,
++	.driver = {
++		.name = "lq_pci",
++		.owner = THIS_MODULE,
++	},
++};
++
++int __init
++pcibios_init(void)
++{
++	int ret = platform_driver_register(&lq_pci_driver);
++	if(ret)
++		printk(KERN_INFO "lq_pci: Error registering platfom driver!");
++	return ret;
++}
++
++arch_initcall(pcibios_init);
diff --git a/target/linux/lantiq/patches/270-crypto.patch b/target/linux/lantiq/patches/270-crypto.patch
new file mode 100644
index 0000000000..e6ee88585c
--- /dev/null
+++ b/target/linux/lantiq/patches/270-crypto.patch
@@ -0,0 +1,6209 @@
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -243,4 +243,75 @@
+ 	  OMAP processors have SHA1/MD5 hw accelerator. Select this if you
+ 	  want to use the OMAP module for SHA1/MD5 algorithms.
+ 
++config CRYPTO_DEV_LANTIQ
++	bool "Support for Lantiq crypto engine"
++	select CRYPTO_ALGAPI
++	default y
++	help
++	Will support Lantiq crypto hardware
++	  If you are unsure, say M.
++
++menuconfig CRYPTO_DEV_LANTIQ_DES
++	bool "Lantiq crypto hardware for DES algorithm"
++	depends on CRYPTO_DEV_LANTIQ
++	select CRYPTO_BLKCIPHER
++	default y
++	help
++	Use crypto hardware for DES/3DES algorithm.
++	  If unsure say N.
++
++menuconfig CRYPTO_DEV_LANTIQ_AES
++	bool "Lantiq crypto hardware for AES algorithm"
++	depends on CRYPTO_DEV_LANTIQ
++	select CRYPTO_BLKCIPHER
++	default y
++	help
++	Use crypto hardware for AES algorithm.
++	  If unsure say N.
++
++menuconfig CRYPTO_DEV_LANTIQ_ARC4
++	bool "Lantiq crypto hardware for ARC4 algorithm"
++	depends on (CRYPTO_DEV_LANTIQ && IFXMIPS_AR9)
++	select CRYPTO_BLKCIPHER
++	default y
++	help
++	Use crypto hardware for ARC4 algorithm.
++	  If unsure say N.
++
++menuconfig CRYPTO_DEV_LANTIQ_MD5
++	bool "Lantiq crypto hardware for MD5 algorithm"
++	depends on CRYPTO_DEV_LANTIQ
++	select CRYPTO_BLKCIPHER
++	default y
++	help
++	Use crypto hardware for MD5 algorithm.
++	  If unsure say N.
++
++menuconfig CRYPTO_DEV_LANTIQ_SHA1
++	bool "Lantiq crypto hardware for SHA1 algorithm"
++	depends on CRYPTO_DEV_LANTIQ
++	select CRYPTO_BLKCIPHER
++	default y
++	help
++	Use crypto hardware for SHA1 algorithm.
++	  If unsure say N.
++
++menuconfig CRYPTO_DEV_LANTIQ_SHA1_HMAC
++	bool "Lantiq crypto hardware for SHA1_HMAC algorithm"
++	depends on (CRYPTO_DEV_LANTIQ && IFXMIPS_AR9)
++	select CRYPTO_BLKCIPHER
++	default y
++	help
++	Use crypto hardware for SHA1_HMAC algorithm.
++	  If unsure say N.
++
++menuconfig CRYPTO_DEV_LANTIQ_MD5_HMAC
++	bool "Lantiq crypto hardware for MD5_HMAC algorithms"
++	depends on (CRYPTO_DEV_LANTIQ && IFXMIPS_AR9)
++	select CRYPTO_BLKCIPHER
++	default y
++	help
++	  Use crypto hardware for MD5_HMAC algorithm.
++	  If unsure say N.
++
+ endif # CRYPTO_HW
+--- /dev/null
++++ b/drivers/crypto/lantiq/Makefile
+@@ -0,0 +1,11 @@
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu_falcon.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu_danube.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu_ar9.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ_DES) += des.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ_AES) += aes.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ_ARC4) += arc4.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ_SHA1) += sha1.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC) += sha1_hmac.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ_MD5) += md5.o
++obj-$(CONFIG_CRYPTO_DEV_LANTIQ_MD5_HMAC) += md5_hmac.o
+--- /dev/null
++++ b/drivers/crypto/lantiq/aes.c
+@@ -0,0 +1,1029 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++ \defgroup LQ_DEU LQ_DEU_DRIVERS
++ \ingroup API
++ \brief Lantiq DEU driver module
++*/
++
++/**
++  \file aes.c
++  \ingroup LQ_DEU
++  \brief AES Encryption Driver main file
++*/
++
++/**
++ \defgroup LQ_AES_FUNCTIONS LQ_AES_FUNCTIONS
++ \ingroup LQ_DEU
++ \brief Lantiq AES driver Functions
++*/
++
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/crypto.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <asm/byteorder.h>
++#include <crypto/algapi.h>
++#include "deu.h"
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++#	include "deu_dma.h"
++#endif
++
++static spinlock_t cipher_lock;
++
++/* Definition of constants */
++
++#define AES_MIN_KEY_SIZE		16
++#define AES_MAX_KEY_SIZE		32
++#define AES_BLOCK_SIZE			16
++#define CTR_RFC3686_NONCE_SIZE		4
++#define CTR_RFC3686_IV_SIZE		8
++#define CTR_RFC3686_MAX_KEY_SIZE	(AES_MAX_KEY_SIZE \
++					 + CTR_RFC3686_NONCE_SIZE)
++
++struct aes_ctx {
++	int key_length;
++	u32 buf[AES_MAX_KEY_SIZE];
++	u8 nonce[CTR_RFC3686_NONCE_SIZE];
++};
++
++/** \fn int aes_set_key(struct crypto_tfm *tfm, const uint8_t *in_key, unsigned int key_len)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief sets the AES keys
++ *  \param tfm linux crypto algo transform
++ *  \param in_key input key
++ *  \param key_len key lengths of 16, 24 and 32 bytes supported
++ *  \return -EINVAL - bad key length, 0 - SUCCESS
++*/
++static int aes_set_key(struct crypto_tfm *tfm,
++		       const u8 *in_key,
++		       unsigned int key_len)
++{
++	struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
++	u32 *flags = &tfm->crt_flags;
++
++	DPRINTF(0, "ctx @%p, key_len %d\n", ctx, key_len);
++
++	if (key_len != 16 && key_len != 24 && key_len != 32) {
++		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
++		return -EINVAL;
++	}
++
++	ctx->key_length = key_len;
++	memcpy((u8 *)(ctx->buf), in_key, key_len);
++
++	return 0;
++}
++
++#ifndef CONFIG_CRYPTO_DEV_DMA
++/** \fn void deu_aes(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, size_t nbytes, int encdec, int mode)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief main interface to AES hardware
++ *  \param ctx_arg crypto algo context
++ *  \param out_arg output bytestream
++ *  \param in_arg input bytestream
++ *  \param iv_arg initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param mode operation mode such as ebc, cbc, ctr
++ *
++*/
++static void deu_aes(void *ctx_arg,
++		    u8 *out_arg,
++		    const u8 *in_arg,
++		    u8 *iv_arg,
++		    size_t nbytes,
++		    int encdec,
++		    int mode)
++#else
++
++/** \fn void deu_aes_core(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, size_t nbytes, int encdec, int mode)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief main interface to AES hardware
++ *  \param ctx_arg crypto algo context
++ *  \param out_arg output bytestream
++ *  \param in_arg input bytestream
++ *  \param iv_arg initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param mode operation mode such as ebc, cbc, ctr
++ *
++*/
++static void deu_aes_core(void *ctx_arg,
++			 u8 *out_arg,
++			 const u8 *in_arg,
++			 u8 *iv_arg,
++			 size_t nbytes,
++			 int encdec,
++			 int mode)
++#endif
++
++{
++	/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
++	volatile struct deu_aes *aes = (volatile struct deu_aes *)AES_START;
++	struct aes_ctx *ctx = (struct aes_ctx *)ctx_arg;
++	u32 *in_key = ctx->buf;
++	ulong flag;
++	/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
++	int key_len = ctx->key_length;
++
++#ifndef CONFIG_CRYPTO_DEV_DMA
++	int i = 0;
++	int byte_cnt = nbytes;
++#else
++	volatile struct deu_dma *dma = (struct deu_dma *)LQ_DEU_DMA_CON;
++	struct dma_device_info *dma_device = lq_deu[0].dma_device;
++	/* struct deu_drv_priv *deu_priv =
++	 *	(struct deu_drv_priv *)dma_device->priv; */
++	int wlen = 0;
++	u32 *outcopy = NULL;
++	u32 *dword_mem_aligned_in = NULL;
++
++#	ifdef CONFIG_CRYPTO_DEV_POLL_DMA
++	u32 timeout = 0;
++	u32 *out_dma = NULL;
++#	endif
++#endif
++
++	DPRINTF(0, "ctx @%p, mode %d, encdec %d\n", ctx, mode, encdec);
++
++	CRTCL_SECT_START;
++
++	/* 128, 192 or 256 bit key length */
++	aes->ctrl.K = key_len / 8 - 2;
++	if (key_len == 128 / 8) {
++		aes->K3R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 0));
++		aes->K2R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 1));
++		aes->K1R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 2));
++		aes->K0R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 3));
++	}
++	else if (key_len == 192 / 8) {
++		aes->K5R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 0));
++		aes->K4R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 1));
++		aes->K3R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 2));
++		aes->K2R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 3));
++		aes->K1R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 4));
++		aes->K0R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 5));
++	}
++	else if (key_len == 256 / 8) {
++		aes->K7R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 0));
++		aes->K6R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 1));
++		aes->K5R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 2));
++		aes->K4R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 3));
++		aes->K3R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 4));
++		aes->K2R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 5));
++		aes->K1R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 6));
++		aes->K0R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 7));
++	}
++	else {
++		CRTCL_SECT_END;
++		return; /* -EINVAL; */
++	}
++
++	/* let HW pre-process DEcryption key in any case (even if
++	   ENcryption is used). Key Valid (KV) bit is then only
++	   checked in decryption routine! */
++	aes->ctrl.PNK = 1;
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++	while (aes->ctrl.BUS) {
++		/* this will not take long */
++	}
++	AES_DMA_MISC_CONFIG();
++#endif
++
++	aes->ctrl.E_D = !encdec; /* encryption */
++	aes->ctrl.O = mode;      /* 0 ECB 1 CBC 2 OFB 3 CFB 4 CTR */
++	aes->ctrl.SM = 1;        /* start after writing input register */
++	aes->ctrl.DAU = 0;       /* Disable Automatic Update of init
++					vector */
++	aes->ctrl.ARS = 1;       /* Autostart Select - write to IHR */
++
++	/* aes->ctrl.F = 128; */ /* default; only for CFB and OFB modes;
++					change only for
++					customer-specific apps */
++	if (mode > 0) {
++		aes->IV3R = DEU_ENDIAN_SWAP(*(u32 *)iv_arg);
++		aes->IV2R = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 1));
++		aes->IV1R = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 2));
++		aes->IV0R = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 3));
++	};
++
++#ifndef CONFIG_CRYPTO_DEV_DMA
++	i = 0;
++	while (byte_cnt >= 16) {
++		aes->ID3R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 0));
++		aes->ID2R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 1));
++		aes->ID1R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 2));
++		/* start crypto */
++		aes->ID0R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 3));
++
++		while (aes->ctrl.BUS) {
++			/* this will not take long */
++		}
++
++		*((volatile u32 *)out_arg + (i * 4) + 0) = aes->OD3R;
++		*((volatile u32 *)out_arg + (i * 4) + 1) = aes->OD2R;
++		*((volatile u32 *)out_arg + (i * 4) + 2) = aes->OD1R;
++		*((volatile u32 *)out_arg + (i * 4) + 3) = aes->OD0R;
++
++		i++;
++		byte_cnt -= 16;
++	}
++#else /* dma */
++	/* Prepare Rx buf length used in dma psuedo interrupt */
++	/* deu_priv->deu_rx_buf = out_arg; */
++	/* deu_priv->deu_rx_len = nbytes; */
++
++	/* memory alignment issue */
++	dword_mem_aligned_in = (u32 *)DEU_DWORD_REORDERING(in_arg,
++							   aes_buff_in,
++							   BUFFER_IN, nbytes);
++
++	dma->ctrl.ALGO = 1; /* AES */
++	dma->ctrl.BS = 0;
++	aes->ctrl.DAU = 0;
++	dma->ctrl.EN = 1;
++
++	while (aes->ctrl.BUS) {
++		/* wait for AES to be ready */
++	};
++
++	wlen = dma_device_write(dma_device, (u8 *)dword_mem_aligned_in,
++				nbytes, NULL);
++	if (wlen != nbytes) {
++		dma->ctrl.EN = 0;
++		CRTCL_SECT_END;
++		printk(KERN_ERR "[%s %s %d]: dma_device_write fail!\n",
++		       __FILE__, __func__, __LINE__);
++		return; /* -EINVAL; */
++	}
++
++	WAIT_AES_DMA_READY();
++
++#	ifdef CONFIG_CRYPTO_DEV_POLL_DMA
++	outcopy = (u32 *)DEU_DWORD_REORDERING(out_arg, aes_buff_out,
++					      BUFFER_OUT, nbytes);
++
++	/* polling DMA rx channel */
++	while ((dma_device_read(dma_device, (u8 **)&out_dma, NULL)) == 0) {
++		timeout++;
++
++		if (timeout >= 333000) {
++			dma->ctrl.EN = 0;
++			CRTCL_SECT_END;
++			printk (KERN_ERR "[%s %s %d]: timeout!!\n",
++				__FILE__, __func__, __LINE__);
++			return; /* -EINVAL; */
++		}
++	}
++
++	WAIT_AES_DMA_READY();
++
++	AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes);
++
++#	else /* not working at the moment.. */
++	CRTCL_SECT_END;
++
++	/* sleep and wait for Rx finished */
++	DEU_WAIT_EVENT(deu_priv->deu_thread_wait, DEU_EVENT,
++		       deu_priv->deu_event_flags);
++
++	CRTCL_SECT_START;
++#	endif
++
++#endif /* dma */
++
++	/* tc.chen : copy iv_arg back */
++	if (mode > 0) {
++		*((u32 *)iv_arg) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg));
++		*((u32 *)iv_arg + 1) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 1));
++		*((u32 *)iv_arg + 2) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 2));
++		*((u32 *)iv_arg + 3) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 3));
++	}
++
++	CRTCL_SECT_END;
++}
++
++/** \fn int ctr_rfc3686_aes_set_key(struct crypto_tfm *tfm, const uint8_t *in_key, unsigned int key_len)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief sets RFC3686 key
++ *  \param tfm linux crypto algo transform
++ *  \param in_key input key
++ *  \param key_len key lengths of 20, 28 and 36 bytes supported; last 4 bytes is nonce
++ *  \return 0 - SUCCESS
++ *          -EINVAL - bad key length
++*/
++static int ctr_rfc3686_aes_set_key(struct crypto_tfm *tfm,
++				   const uint8_t *in_key,
++				   unsigned int key_len)
++{
++	struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
++	u32 *flags = &tfm->crt_flags;
++
++	memcpy(ctx->nonce, in_key + (key_len - CTR_RFC3686_NONCE_SIZE),
++	       CTR_RFC3686_NONCE_SIZE);
++
++	key_len -= CTR_RFC3686_NONCE_SIZE; /* remove 4 bytes of nonce */
++
++	if (key_len != 16 && key_len != 24 && key_len != 32) {
++		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
++		return -EINVAL;
++	}
++
++	ctx->key_length = key_len;
++
++	memcpy((u8 *)(ctx->buf), in_key, key_len);
++
++	return 0;
++}
++
++/** \fn void deu_aes(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief main interface with DEU hardware in DMA mode
++ *  \param ctx_arg crypto algo context
++ *  \param out_arg output bytestream
++ *  \param in_arg input bytestream
++ *  \param iv_arg initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param mode operation mode such as ebc, cbc, ctr
++*/
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++static void deu_aes(void *ctx_arg,
++		    u8 *out_arg,
++		    const u8 *in_arg,
++		    u8 *iv_arg,
++		    u32 nbytes,
++		    int encdec,
++		    int mode)
++{
++	u32 remain = nbytes;
++	u32 inc;
++
++	while (remain > 0) {
++		if (remain >= DEU_MAX_PACKET_SIZE)
++			inc = DEU_MAX_PACKET_SIZE;
++		else
++			inc = remain;
++
++		remain -= inc;
++
++		deu_aes_core(ctx_arg, out_arg, in_arg, iv_arg, inc, encdec,
++			     mode);
++
++		out_arg += inc;
++		in_arg += inc;
++	}
++}
++#endif
++
++/* definitions from linux/include/crypto.h:
++#define CRYPTO_TFM_MODE_ECB       0x00000001
++#define CRYPTO_TFM_MODE_CBC       0x00000002
++#define CRYPTO_TFM_MODE_CFB       0x00000004
++#define CRYPTO_TFM_MODE_CTR       0x00000008
++#define CRYPTO_TFM_MODE_OFB       0x00000010
++but hardware definition: 0 ECB 1 CBC 2 OFB 3 CFB 4 CTR */
++
++/** \fn void deu_aes_ecb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief sets AES hardware to ECB mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_aes_ecb(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	deu_aes(ctx, dst, src, NULL, nbytes, encdec, 0);
++}
++
++/** \fn void deu_aes_cbc(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief sets AES hardware to CBC mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_aes_cbc(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	deu_aes(ctx, dst, src, iv, nbytes, encdec, 1);
++}
++
++#if 0
++/** \fn void deu_aes_ofb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief sets AES hardware to OFB mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_aes_ofb(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	deu_aes(ctx, dst, src, iv, nbytes, encdec, 2);
++}
++
++/** \fn void deu_aes_cfb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief sets AES hardware to CFB mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_aes_cfb(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	deu_aes(ctx, dst, src, iv, nbytes, encdec, 3);
++}
++#endif
++
++/** \fn void deu_aes_ctr(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief sets AES hardware to CTR mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_aes_ctr(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	deu_aes(ctx, dst, src, iv, nbytes, encdec, 4);
++}
++
++/** \fn void aes_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief encrypt AES_BLOCK_SIZE of data
++ *  \param tfm linux crypto algo transform
++ *  \param out output bytestream
++ *  \param in input bytestream
++*/
++static void aes_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++{
++	struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
++	deu_aes(ctx, out, in, NULL, AES_BLOCK_SIZE, CRYPTO_DIR_ENCRYPT, 0);
++}
++
++/** \fn void aes_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief decrypt AES_BLOCK_SIZE of data
++ *  \param tfm linux crypto algo transform
++ *  \param out output bytestream
++ *  \param in input bytestream
++*/
++static void aes_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++{
++	struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
++	deu_aes(ctx, out, in, NULL, AES_BLOCK_SIZE, CRYPTO_DIR_DECRYPT, 0);
++}
++
++/*
++ * \brief AES function mappings
++*/
++static struct crypto_alg aes_alg = {
++	.cra_name		= "aes",
++	.cra_driver_name	= "lq_deu-aes",
++	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
++	.cra_blocksize		= AES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct aes_ctx),
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(aes_alg.cra_list),
++	.cra_u			= {
++		.cipher = {
++			.cia_min_keysize	= AES_MIN_KEY_SIZE,
++			.cia_max_keysize	= AES_MAX_KEY_SIZE,
++			.cia_setkey		= aes_set_key,
++			.cia_encrypt		= aes_encrypt,
++			.cia_decrypt		= aes_decrypt,
++		}
++	}
++};
++
++/** \fn int ecb_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief ECB AES encrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int ecb_aes_encrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    NULL, nbytes, CRYPTO_DIR_ENCRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/** \fn int ecb_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief ECB AES decrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int ecb_aes_decrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    NULL, nbytes, CRYPTO_DIR_DECRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/*
++ * \brief AES function mappings
++*/
++static struct crypto_alg ecb_aes_alg = {
++	.cra_name		= "ecb(aes)",
++	.cra_driver_name	= "lq_deu-ecb(aes)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= AES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct aes_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(ecb_aes_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= AES_MIN_KEY_SIZE,
++			.max_keysize	= AES_MAX_KEY_SIZE,
++			.setkey		= aes_set_key,
++			.encrypt	= ecb_aes_encrypt,
++			.decrypt	= ecb_aes_decrypt,
++		}
++	}
++};
++
++/** \fn int cbc_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief CBC AES encrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int cbc_aes_encrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		u8 *iv = walk.iv;
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/** \fn int cbc_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief CBC AES decrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int cbc_aes_decrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		u8 *iv = walk.iv;
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/*
++ * \brief AES function mappings
++*/
++static struct crypto_alg cbc_aes_alg = {
++	.cra_name		= "cbc(aes)",
++	.cra_driver_name	= "lq_deu-cbc(aes)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= AES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct aes_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(cbc_aes_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= AES_MIN_KEY_SIZE,
++			.max_keysize	= AES_MAX_KEY_SIZE,
++			.ivsize		= AES_BLOCK_SIZE,
++			.setkey		= aes_set_key,
++			.encrypt	= cbc_aes_encrypt,
++			.decrypt	= cbc_aes_decrypt,
++		}
++	}
++};
++
++/** \fn int ctr_basic_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief Counter mode AES encrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int ctr_basic_aes_encrypt(struct blkcipher_desc *desc,
++				 struct scatterlist *dst,
++				 struct scatterlist *src,
++				 unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		u8 *iv = walk.iv;
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/** \fn  int ctr_basic_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief Counter mode AES decrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int ctr_basic_aes_decrypt(struct blkcipher_desc *desc,
++				 struct scatterlist *dst,
++				 struct scatterlist *src,
++				 unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		u8 *iv = walk.iv;
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/*
++ * \brief AES function mappings
++*/
++static struct crypto_alg ctr_basic_aes_alg = {
++	.cra_name		= "ctr(aes)",
++	.cra_driver_name	= "lq_deu-ctr(aes)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= AES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct aes_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(ctr_basic_aes_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= AES_MIN_KEY_SIZE,
++			.max_keysize	= AES_MAX_KEY_SIZE,
++			.ivsize		= AES_BLOCK_SIZE,
++			.setkey		= aes_set_key,
++			.encrypt	= ctr_basic_aes_encrypt,
++			.decrypt	= ctr_basic_aes_decrypt,
++		}
++	}
++};
++
++/** \fn  int ctr_rfc3686_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief Counter mode AES (rfc3686) encrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int ctr_rfc3686_aes_encrypt(struct blkcipher_desc *desc,
++				   struct scatterlist *dst,
++				   struct scatterlist *src,
++				   unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++	u8 rfc3686_iv[16];
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	/* set up counter block */
++	memcpy(rfc3686_iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE);
++	memcpy(rfc3686_iv + CTR_RFC3686_NONCE_SIZE, walk.iv,
++	       CTR_RFC3686_IV_SIZE);
++
++	/* initialize counter portion of counter block */
++	*(__be32 *)(rfc3686_iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) =
++		cpu_to_be32(1);
++
++	while ((nbytes = walk.nbytes)) {
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    rfc3686_iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/** \fn int ctr_rfc3686_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief Counter mode AES (rfc3686) decrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int ctr_rfc3686_aes_decrypt(struct blkcipher_desc *desc,
++				   struct scatterlist *dst,
++				   struct scatterlist *src,
++				   unsigned int nbytes)
++{
++	struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++	u8 rfc3686_iv[16];
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	/* set up counter block */
++	memcpy(rfc3686_iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE);
++	memcpy(rfc3686_iv + CTR_RFC3686_NONCE_SIZE, walk.iv,
++	       CTR_RFC3686_IV_SIZE);
++
++	/* initialize counter portion of counter block */
++	*(__be32 *)(rfc3686_iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) =
++		cpu_to_be32(1);
++
++	while ((nbytes = walk.nbytes)) {
++		nbytes -= (nbytes % AES_BLOCK_SIZE);
++		deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    rfc3686_iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
++		nbytes &= AES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/*
++ * \brief AES function mappings
++*/
++static struct crypto_alg ctr_rfc3686_aes_alg = {
++	.cra_name		= "rfc3686(ctr(aes))",
++	.cra_driver_name	= "lq_deu-ctr-rfc3686(aes)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= AES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct aes_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(ctr_rfc3686_aes_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= AES_MIN_KEY_SIZE,
++			.max_keysize	= CTR_RFC3686_MAX_KEY_SIZE,
++			.ivsize		= CTR_RFC3686_IV_SIZE,
++			.setkey		= ctr_rfc3686_aes_set_key,
++			.encrypt	= ctr_rfc3686_aes_encrypt,
++			.decrypt	= ctr_rfc3686_aes_decrypt,
++		}
++	}
++};
++
++/** \fn int lq_deu_init_aes (void)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief function to initialize AES driver
++ *  \return ret
++*/
++int lq_deu_init_aes(void)
++{
++	int ret;
++
++	if ((ret = crypto_register_alg(&aes_alg)))
++		goto aes_err;
++
++	if ((ret = crypto_register_alg(&ecb_aes_alg)))
++		goto ecb_aes_err;
++
++	if ((ret = crypto_register_alg(&cbc_aes_alg)))
++		goto cbc_aes_err;
++
++	if ((ret = crypto_register_alg(&ctr_basic_aes_alg)))
++		goto ctr_basic_aes_err;
++
++	if ((ret = crypto_register_alg(&ctr_rfc3686_aes_alg)))
++		goto ctr_rfc3686_aes_err;
++
++	deu_aes_chip_init();
++
++	CRTCL_SECT_INIT;
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++	if (ALLOCATE_MEMORY(BUFFER_IN, AES_ALGO) < 0) {
++		printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
++		       __FILE__, __func__, __LINE__);
++		goto ctr_rfc3686_aes_err;
++	}
++	if (ALLOCATE_MEMORY(BUFFER_OUT, AES_ALGO) < 0) {
++		printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
++		       __FILE__, __func__, __LINE__);
++		goto ctr_rfc3686_aes_err;
++	}
++#endif
++
++	printk(KERN_NOTICE "Lantiq DEU AES initialized%s.\n",
++	       disable_deudma ? "" : " (DMA)");
++	return ret;
++
++ctr_rfc3686_aes_err:
++	crypto_unregister_alg(&ctr_rfc3686_aes_alg);
++	printk(KERN_ERR "Lantiq ctr_rfc3686_aes initialization failed!\n");
++	return ret;
++ctr_basic_aes_err:
++	crypto_unregister_alg(&ctr_basic_aes_alg);
++	printk(KERN_ERR "Lantiq ctr_basic_aes initialization failed!\n");
++	return ret;
++cbc_aes_err:
++	crypto_unregister_alg(&cbc_aes_alg);
++	printk(KERN_ERR "Lantiq cbc_aes initialization failed!\n");
++	return ret;
++ecb_aes_err:
++	crypto_unregister_alg(&ecb_aes_alg);
++	printk(KERN_ERR "Lantiq aes initialization failed!\n");
++	return ret;
++aes_err:
++	printk(KERN_ERR "Lantiq DEU AES initialization failed!\n");
++	return ret;
++}
++
++/** \fn void lq_deu_fini_aes(void)
++ *  \ingroup LQ_AES_FUNCTIONS
++ *  \brief unregister aes driver
++*/
++void lq_deu_fini_aes(void)
++{
++	crypto_unregister_alg(&aes_alg);
++	crypto_unregister_alg(&ecb_aes_alg);
++	crypto_unregister_alg(&cbc_aes_alg);
++	crypto_unregister_alg(&ctr_basic_aes_alg);
++	crypto_unregister_alg(&ctr_rfc3686_aes_alg);
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++	FREE_MEMORY(aes_buff_in);
++	FREE_MEMORY(aes_buff_out);
++#endif
++}
+--- /dev/null
++++ b/drivers/crypto/lantiq/arc4.c
+@@ -0,0 +1,397 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file arc4.c
++  \ingroup LQ_DEU
++  \brief ARC4 encryption DEU driver file
++*/
++
++/**
++  \defgroup LQ_ARC4_FUNCTIONS LQ_ARC4_FUNCTIONS
++  \ingroup LQ_DEU
++  \brief Lantiq DEU driver functions
++*/
++
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/crypto.h>
++#include <crypto/algapi.h>
++#include <linux/interrupt.h>
++#include <asm/byteorder.h>
++#include <linux/delay.h>
++
++#ifdef CONFIG_SOL_LANTIQ_XWAY
++
++#include "deu.h"
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++
++static spinlock_t cipher_lock;
++
++/* Preprocessor declerations */
++#define ARC4_MIN_KEY_SIZE	1
++/* #define ARC4_MAX_KEY_SIZE	256 */
++#define ARC4_MAX_KEY_SIZE	16
++#define ARC4_BLOCK_SIZE		1
++
++/*
++ * \brief arc4 private structure
++*/
++struct arc4_ctx {
++	int key_length;
++	u8 buf[120];
++};
++
++/** \fn static void deu_arc4(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief main interface to AES hardware
++    \param ctx_arg crypto algo context
++    \param out_arg output bytestream
++    \param in_arg input bytestream
++    \param iv_arg initialization vector
++    \param nbytes length of bytestream
++    \param encdec 1 for encrypt; 0 for decrypt
++    \param mode operation mode such as ebc, cbc, ctr
++*/
++static void deu_arc4(void *ctx_arg,
++		     u8 *out_arg,
++		     const u8 *in_arg,
++		     u8 *iv_arg,
++		     u32 nbytes,
++		     int encdec,
++		     int mode)
++{
++	volatile struct deu_arc4 *arc4 = (struct deu_arc4 *) ARC4_START;
++	int i = 0;
++	ulong flag;
++
++#if 1 /* need to handle nbytes not multiple of 16 */
++	volatile u32 tmp_array32[4];
++	volatile u8 *tmp_ptr8;
++	int remaining_bytes, j;
++#endif
++
++	CRTCL_SECT_START;
++
++	arc4->IDLEN = nbytes;
++
++#if 1
++	while (i < nbytes) {
++		arc4->ID3R = *((u32 *) in_arg + (i>>2) + 0);
++		arc4->ID2R = *((u32 *) in_arg + (i>>2) + 1);
++		arc4->ID1R = *((u32 *) in_arg + (i>>2) + 2);
++		arc4->ID0R = *((u32 *) in_arg + (i>>2) + 3);
++
++		arc4->ctrl.GO = 1;
++
++		while (arc4->ctrl.BUS) {
++			/* this will not take long */ }
++
++#if 1
++		/* need to handle nbytes not multiple of 16 */
++		tmp_array32[0] = arc4->OD3R;
++		tmp_array32[1] = arc4->OD2R;
++		tmp_array32[2] = arc4->OD1R;
++		tmp_array32[3] = arc4->OD0R;
++
++		remaining_bytes = nbytes - i;
++		if (remaining_bytes > 16)
++			remaining_bytes = 16;
++
++		tmp_ptr8 = (u8 *)&tmp_array32[0];
++		for (j = 0; j < remaining_bytes; j++)
++			*out_arg++ = *tmp_ptr8++;
++#else
++		*((u32 *) out_arg + (i>>2) + 0) = arc4->OD3R;
++		*((u32 *) out_arg + (i>>2) + 1) = arc4->OD2R;
++		*((u32 *) out_arg + (i>>2) + 2) = arc4->OD1R;
++		*((u32 *) out_arg + (i>>2) + 3) = arc4->OD0R;
++#endif
++
++		i += 16;
++	}
++#else /* dma */
++
++#endif /* dma */
++
++	CRTCL_SECT_END;
++}
++
++/** \fn arc4_chip_init(void)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief initialize arc4 hardware
++*/
++static void arc4_chip_init(void)
++{
++	/* do nothing */
++}
++
++/** \fn static int arc4_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief sets ARC4 key
++    \param tfm linux crypto algo transform
++    \param in_key input key
++    \param key_len key lengths less than or equal to 16 bytes supported
++*/
++static int arc4_set_key(struct crypto_tfm *tfm,
++			const u8 *inkey,
++			unsigned int key_len)
++{
++	/* struct arc4_ctx *ctx = crypto_tfm_ctx(tfm); */
++	volatile struct deu_arc4 *arc4 = (struct deu_arc4 *) ARC4_START;
++
++	u32 *in_key = (u32 *)inkey;
++
++	/* must program all bits at one go?!!! */
++#if 1
++	/* #ifndef CONFIG_CRYPTO_DEV_VR9_DMA */
++	*LQ_ARC4_CON = ( (1<<31) | ((key_len - 1)<<27) | (1<<26) | (3<<16) );
++	/* NDC=1,ENDI=1,GO=0,KSAE=1,SM=0 */
++
++	arc4->K3R = *((u32 *) in_key + 0);
++	arc4->K2R = *((u32 *) in_key + 1);
++	arc4->K1R = *((u32 *) in_key + 2);
++	arc4->K0R = *((u32 *) in_key + 3);
++#else /* dma */
++	*AMAZONS_ARC4_CON = ( (1<<31) | ((key_len - 1)<<27) | (1<<26) | (3<<16) | (1<<4) );
++	/* NDC=1,ENDI=1,GO=0,KSAE=1,SM=1 */
++
++	arc4->K3R = *((u32 *) in_key + 0);
++	arc4->K2R = *((u32 *) in_key + 1);
++	arc4->K1R = *((u32 *) in_key + 2);
++	arc4->K0R = *((u32 *) in_key + 3);
++
++#if 0
++	arc4->K3R = deu_endian_swap(*((u32 *) in_key + 0));
++	arc4->K2R = deu_endian_swap(*((u32 *) in_key + 1));
++	arc4->K1R = deu_endian_swap(*((u32 *) in_key + 2));
++	arc4->K0R = deu_endian_swap(*((u32 *) in_key + 3));
++#endif
++
++#endif
++
++#if 0 /* arc4 is a ugly state machine, KSAE can only be set once per session */
++	ctx->key_length = key_len;
++
++	memcpy((u8 *)(ctx->buf), in_key, key_len);
++#endif
++
++	return 0;
++}
++
++/** \fn static void deu_arc4_ecb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief sets ARC4 hardware to ECB mode
++    \param ctx crypto algo context
++    \param dst output bytestream
++    \param src input bytestream
++    \param iv initialization vector
++    \param nbytes length of bytestream
++    \param encdec 1 for encrypt; 0 for decrypt
++    \param inplace not used
++*/
++static void deu_arc4_ecb(void *ctx,
++			 uint8_t *dst,
++			 const uint8_t *src,
++			 uint8_t *iv,
++			 size_t nbytes,
++			 int encdec,
++			 int inplace)
++{
++	deu_arc4(ctx, dst, src, NULL, nbytes, encdec, 0);
++}
++
++/** \fn static void arc4_crypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief encrypt/decrypt ARC4_BLOCK_SIZE of data
++    \param tfm linux crypto algo transform
++    \param out output bytestream
++    \param in input bytestream
++*/
++static void arc4_crypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
++{
++	struct arc4_ctx *ctx = crypto_tfm_ctx(tfm);
++
++	deu_arc4(ctx, out, in, NULL, ARC4_BLOCK_SIZE,
++		  CRYPTO_DIR_DECRYPT, CRYPTO_TFM_MODE_ECB);
++}
++
++/*
++ * \brief ARC4 function mappings
++*/
++static struct crypto_alg arc4_alg = {
++	.cra_name		= "arc4",
++	.cra_driver_name	= "lq_deu-arc4",
++	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
++	.cra_blocksize		= ARC4_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct arc4_ctx),
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(arc4_alg.cra_list),
++	.cra_u			= {
++		.cipher = {
++			.cia_min_keysize	= ARC4_MIN_KEY_SIZE,
++			.cia_max_keysize	= ARC4_MAX_KEY_SIZE,
++			.cia_setkey		= arc4_set_key,
++			.cia_encrypt		= arc4_crypt,
++			.cia_decrypt		= arc4_crypt,
++		}
++	}
++};
++
++/** \fn static int ecb_arc4_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief ECB ARC4 encrypt using linux crypto blkcipher
++    \param desc blkcipher descriptor
++    \param dst output scatterlist
++    \param src input scatterlist
++    \param nbytes data size in bytes
++*/
++static int ecb_arc4_encrypt(struct blkcipher_desc *desc,
++			    struct scatterlist *dst,
++			    struct scatterlist *src,
++			    unsigned int nbytes)
++{
++	struct arc4_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	DPRINTF(1, "\n");
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		deu_arc4_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			     NULL, nbytes, CRYPTO_DIR_ENCRYPT, 0);
++		nbytes &= ARC4_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/** \fn static int ecb_arc4_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief ECB ARC4 decrypt using linux crypto blkcipher
++    \param desc blkcipher descriptor
++    \param dst output scatterlist
++    \param src input scatterlist
++    \param nbytes data size in bytes
++*/
++static int ecb_arc4_decrypt(struct blkcipher_desc *desc,
++			    struct scatterlist *dst,
++			    struct scatterlist *src,
++			    unsigned int nbytes)
++{
++	struct arc4_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	DPRINTF(1, "\n");
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		deu_arc4_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			     NULL, nbytes, CRYPTO_DIR_DECRYPT, 0);
++		nbytes &= ARC4_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/*
++ * \brief ARC4 function mappings
++*/
++static struct crypto_alg ecb_arc4_alg = {
++	.cra_name		= "ecb(arc4)",
++	.cra_driver_name	= "lq_deu-ecb(arc4)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= ARC4_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct arc4_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(ecb_arc4_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= ARC4_MIN_KEY_SIZE,
++			.max_keysize	= ARC4_MAX_KEY_SIZE,
++			.setkey		= arc4_set_key,
++			.encrypt	= ecb_arc4_encrypt,
++			.decrypt	= ecb_arc4_decrypt,
++		}
++	}
++};
++
++/** \fn int lq_deu_init_arc4(void)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief initialize arc4 driver
++*/
++int lq_deu_init_arc4(void)
++{
++	int ret;
++
++	if ((ret = crypto_register_alg(&arc4_alg)))
++		goto arc4_err;
++
++	if ((ret = crypto_register_alg(&ecb_arc4_alg)))
++		goto ecb_arc4_err;
++
++	arc4_chip_init();
++
++	CRTCL_SECT_INIT;
++
++	printk(KERN_NOTICE "Lantiq DEU ARC4 initialized %s.\n",
++	       disable_deudma ? "" : " (DMA)");
++	return ret;
++
++arc4_err:
++	crypto_unregister_alg(&arc4_alg);
++	printk(KERN_ERR "Lantiq arc4 initialization failed!\n");
++	return ret;
++ecb_arc4_err:
++	crypto_unregister_alg(&ecb_arc4_alg);
++	printk(KERN_ERR "Lantiq ecb_arc4 initialization failed!\n");
++
++	return ret;
++}
++
++/** \fn void lq_deu_fini_arc4(void)
++    \ingroup LQ_ARC4_FUNCTIONS
++    \brief unregister arc4 driver
++*/
++void lq_deu_fini_arc4(void)
++{
++	crypto_unregister_alg(&arc4_alg);
++	crypto_unregister_alg(&ecb_arc4_alg);
++}
++
++#endif
++
++#endif
+--- /dev/null
++++ b/drivers/crypto/lantiq/des.c
+@@ -0,0 +1,929 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver
++*/
++
++/**
++  \file des.c
++  \ingroup LQ_DEU
++  \brief DES encryption DEU driver file
++*/
++
++/**
++  \defgroup LQ_DES_FUNCTIONS LQ_DES_FUNCTIONS
++  \ingroup LQ_DEU
++  \brief Lantiq DES Encryption functions
++*/
++
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/crypto.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <asm/byteorder.h>
++#include <crypto/algapi.h>
++
++#ifdef CONFIG_SOL_LANTIQ_XWAY
++
++#include "deu.h"
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++#	include "deu_dma.h"
++#endif
++
++static spinlock_t cipher_lock;
++
++/* Preprocessor declarations */
++#define DES_KEY_SIZE		8
++#define DES_EXPKEY_WORDS	32
++#define DES_BLOCK_SIZE		8
++#define DES3_EDE_KEY_SIZE	(3 * DES_KEY_SIZE)
++#define DES3_EDE_EXPKEY_WORDS	(3 * DES_EXPKEY_WORDS)
++#define DES3_EDE_BLOCK_SIZE	DES_BLOCK_SIZE
++
++struct des_ctx {
++	int controlr_M;
++	int key_length;
++	u8 iv[DES_BLOCK_SIZE];
++	u32 expkey[DES3_EDE_EXPKEY_WORDS];
++};
++
++/** \fn int des_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int key_len)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief sets DES key
++ *  \param tfm linux crypto algo transform
++ *  \param key input key
++ *  \param key_len key length
++*/
++static int des_setkey(struct crypto_tfm *tfm,
++		      const u8 *key,
++		      unsigned int key_len)
++{
++	struct des_ctx *ctx = crypto_tfm_ctx(tfm);
++
++	DPRINTF(0, "ctx @%p, key_len %d %d\n", ctx, key_len);
++
++	ctx->controlr_M = 0;   /* des */
++	ctx->key_length = key_len;
++
++	memcpy((u8 *)(ctx->expkey), key, key_len);
++
++	return 0;
++}
++
++#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++/** \fn void deu_des(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief main interface to DES hardware
++ *  \param ctx_arg crypto algo context
++ *  \param out_arg output bytestream
++ *  \param in_arg input bytestream
++ *  \param iv_arg initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param mode operation mode such as ebc, cbc
++*/
++
++static void deu_des(void *ctx_arg,
++		    u8 *out_arg,
++		    const u8 *in_arg,
++		    u8 *iv_arg,
++		    u32 nbytes,
++		    int encdec,
++		    int mode)
++#else
++/** \fn void deu_des_core(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief main interface to DES hardware
++ *  \param ctx_arg crypto algo context
++ *  \param out_arg output bytestream
++ *  \param in_arg input bytestream
++ *  \param iv_arg initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param mode operation mode such as ebc, cbc
++*/
++static void deu_des_core(void *ctx_arg,
++			 u8 *out_arg,
++			 const u8 *in_arg,
++			 u8 *iv_arg,
++			 u32 nbytes,
++			 int encdec,
++			 int mode)
++#endif
++{
++	volatile struct deu_des *des = (struct deu_des *) DES_3DES_START;
++	struct des_ctx *dctx = ctx_arg;
++	u32 *key = dctx->expkey;
++	ulong flag;
++
++#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	int i = 0;
++	int nblocks = 0;
++#else
++	volatile struct deu_dma *dma = (struct deu_dma *) LQ_DEU_DMA_CON;
++	struct dma_device_info *dma_device = lq_deu[0].dma_device;
++	/* struct deu_drv_priv *deu_priv =
++	 *	(struct deu_drv_priv *)dma_device->priv; */
++	int wlen = 0;
++	u32 *outcopy = NULL;
++	u32 *dword_mem_aligned_in = NULL;
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_POLL_DMA
++	u32 timeout = 0;
++	u32 *out_dma = NULL;
++#endif
++
++#endif
++
++	DPRINTF(0, "ctx @%p, mode %d, encdec %d\n", dctx, mode, encdec);
++
++	CRTCL_SECT_START;
++
++	des->ctrl.E_D = !encdec; /* encryption */
++	des->ctrl.O = mode;      /* 0 ECB, 1 CBC, 2 OFB, 3 CFB, 4 CTR */
++	des->ctrl.SM = 1;        /* start after writing input register */
++	des->ctrl.DAU = 0;       /* Disable Automatic Update of init vect */
++	des->ctrl.ARS = 1;       /* Autostart Select - write to IHR */
++
++	des->ctrl.M = dctx->controlr_M;
++	/* write keys */
++	if (dctx->controlr_M == 0) {
++		/* DES mode */
++		des->K1HR = DEU_ENDIAN_SWAP(*((u32 *) key + 0));
++		des->K1LR = DEU_ENDIAN_SWAP(*((u32 *) key + 1));
++#ifdef CRYPTO_DEBUG
++		printk("key1: %x\n", (*((u32 *) key + 0)));
++		printk("key2: %x\n", (*((u32 *) key + 1)));
++#endif
++	} else {
++		/* 3DES mode (EDE-x) */
++		switch (dctx->key_length) {
++			case 24:
++				des->K3HR = DEU_ENDIAN_SWAP(*((u32 *) key + 4));
++				des->K3LR = DEU_ENDIAN_SWAP(*((u32 *) key + 5));
++				/* no break; */
++			case 16:
++				des->K2HR = DEU_ENDIAN_SWAP(*((u32 *) key + 2));
++				des->K2LR = DEU_ENDIAN_SWAP(*((u32 *) key + 3));
++				/* no break; */
++			case 8:
++				des->K1HR = DEU_ENDIAN_SWAP(*((u32 *) key + 0));
++				des->K1LR = DEU_ENDIAN_SWAP(*((u32 *) key + 1));
++				break;
++			default:
++				CRTCL_SECT_END;
++				return;
++		}
++	}
++
++	/* write init vector (not required for ECB mode) */
++	if (mode > 0) {
++		des->IVHR = DEU_ENDIAN_SWAP(*(u32 *) iv_arg);
++		des->IVLR = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 1));
++	}
++
++#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	nblocks = nbytes / 4;
++
++	for (i = 0; i < nblocks; i += 2) {
++		/* wait for busy bit to clear */
++
++		/*--- Workaround ---------------------------------------------
++		  do a dummy read to the busy flag because it is not raised
++		  early enough in CFB/OFB 3DES modes */
++#ifdef CRYPTO_DEBUG
++		printk("ihr: %x\n", (*((u32 *) in_arg + i)));
++		printk("ilr: %x\n", (*((u32 *) in_arg + 1 + i)));
++#endif
++		des->IHR = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + i));
++		/* start crypto */
++		des->ILR = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + 1 + i));
++
++		while (des->ctrl.BUS) {
++			/* this will not take long */
++		}
++
++		*((u32 *) out_arg + 0 + i) = des->OHR;
++		*((u32 *) out_arg + 1 + i) = des->OLR;
++
++#ifdef CRYPTO_DEBUG
++		printk("ohr: %x\n", (*((u32 *) out_arg + i)));
++		printk("olr: %x\n", (*((u32 *) out_arg + 1 + i)));
++#endif
++	}
++
++#else /* dma mode */
++
++	/* Prepare Rx buf length used in dma psuedo interrupt */
++	/* deu_priv->deu_rx_buf = out_arg; */
++	/* deu_priv->deu_rx_len = nbytes; */
++
++	/* memory alignment issue */
++	dword_mem_aligned_in = (u32 *) DEU_DWORD_REORDERING(in_arg, des_buff_in,
++							    BUFFER_IN, nbytes);
++
++	dma->ctrl.ALGO = 0;       /* DES */
++	des->ctrl.DAU = 0;
++	dma->ctrl.BS = 0;
++	dma->ctrl.EN = 1;
++
++	while (des->ctrl.BUS) {
++		/* wait for AES to be ready */
++	};
++
++	wlen = dma_device_write(dma_device, (u8 *) dword_mem_aligned_in, nbytes,
++				NULL);
++	if (wlen != nbytes) {
++		dma->ctrl.EN = 0;
++		CRTCL_SECT_END;
++		printk(KERN_ERR "[%s %s %d]: dma_device_write fail!\n",
++		       __FILE__, __func__, __LINE__);
++		return; /* -EINVAL; */
++	}
++
++	WAIT_DES_DMA_READY();
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_POLL_DMA
++	outcopy = (u32 *) DEU_DWORD_REORDERING(out_arg, des_buff_out,
++					       BUFFER_OUT, nbytes);
++
++	/* polling DMA rx channel */
++	while ((dma_device_read(dma_device, (u8 **) &out_dma, NULL)) == 0) {
++		timeout++;
++
++		if (timeout >= 333000) {
++			dma->ctrl.EN = 0;
++			CRTCL_SECT_END;
++			printk(KERN_ERR "[%s %s %d]: timeout!!\n",
++			       __FILE__, __func__, __LINE__);
++			return; /* -EINVAL; */
++		}
++	}
++
++	WAIT_DES_DMA_READY();
++
++	DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes);
++#else
++	CRTCL_SECT_END;    /* Sleep and wait for Rx finished */
++	DEU_WAIT_EVENT(deu_priv->deu_thread_wait, DEU_EVENT,
++		       deu_priv->deu_event_flags);
++	CRTCL_SECT_START;
++#endif
++
++#endif /* dma mode */
++
++	if (mode > 0) {
++		*(u32 *) iv_arg = DEU_ENDIAN_SWAP(des->IVHR);
++		*((u32 *) iv_arg + 1) = DEU_ENDIAN_SWAP(des->IVLR);
++	};
++
++	CRTCL_SECT_END;
++}
++
++/* definitions from linux/include/crypto.h:
++#define CRYPTO_TFM_MODE_ECB           0x00000001
++#define CRYPTO_TFM_MODE_CBC           0x00000002
++#define CRYPTO_TFM_MODE_CFB           0x00000004
++#define CRYPTO_TFM_MODE_CTR           0x00000008
++#define CRYPTO_TFM_MODE_OFB           0x00000010
++but hardware definition: 0 ECB 1 CBC 2 OFB 3 CFB 4 CTR */
++
++/** \fn void deu_des(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief main interface to DES hardware
++ *  \param ctx_arg crypto algo context
++ *  \param out_arg output bytestream
++ *  \param in_arg input bytestream
++ *  \param iv_arg initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param mode operation mode such as ebc, cbc
++*/
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++static void deu_des(void *ctx_arg,
++		    u8 *out_arg,
++		    const u8 *in_arg,
++		    u8 *iv_arg,
++		    u32 nbytes,
++		    int encdec,
++		    int mode)
++{
++	u32 remain = nbytes;
++	u32 inc;
++
++	DPRINTF(0, "\n");
++
++	while (remain > 0) {
++		if (remain >= DEU_MAX_PACKET_SIZE)
++			inc = DEU_MAX_PACKET_SIZE;
++		else
++			inc = remain;
++
++		remain -= inc;
++
++		deu_des_core(ctx_arg, out_arg, in_arg, iv_arg, inc, encdec,
++			     mode);
++
++		out_arg += inc;
++		in_arg += inc;
++	}
++}
++#endif
++
++/** \fn  void deu_des_ecb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief sets DES hardware to ECB mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++
++static void deu_des_ecb(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	DPRINTF(0, "ctx @%p\n", ctx);
++	deu_des(ctx, dst, src, NULL, nbytes, encdec, 0);
++}
++
++/** \fn  void deu_des_cbc(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief sets DES hardware to CBC mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_des_cbc(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	DPRINTF(0, "ctx @%p\n", ctx);
++	deu_des(ctx, dst, src, iv, nbytes, encdec, 1);
++}
++
++#if 0
++/** \fn  void deu_des_ofb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief sets DES hardware to OFB mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_des_ofb(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	DPRINTF(0, "ctx @%p\n", ctx);
++	deu_des(ctx, dst, src, iv, nbytes, encdec, 2);
++}
++
++/** \fn void deu_des_cfb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++    \ingroup LQ_DES_FUNCTIONS
++    \brief sets DES hardware to CFB mode
++    \param ctx crypto algo context
++    \param dst output bytestream
++    \param src input bytestream
++    \param iv initialization vector
++    \param nbytes length of bytestream
++    \param encdec 1 for encrypt; 0 for decrypt
++    \param inplace not used
++*/
++static void deu_des_cfb(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	DPRINTF(0, "ctx @%p\n", ctx);
++	deu_des(ctx, dst, src, iv, nbytes, encdec, 3);
++}
++
++/** \fn void deu_des_ctr(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief sets DES hardware to CTR mode
++ *  \param ctx crypto algo context
++ *  \param dst output bytestream
++ *  \param src input bytestream
++ *  \param iv initialization vector
++ *  \param nbytes length of bytestream
++ *  \param encdec 1 for encrypt; 0 for decrypt
++ *  \param inplace not used
++*/
++static void deu_des_ctr(void *ctx,
++			uint8_t *dst,
++			const uint8_t *src,
++			uint8_t *iv,
++			size_t nbytes,
++			int encdec,
++			int inplace)
++{
++	DPRINTF(0, "ctx @%p\n", ctx);
++	deu_des(ctx, dst, src, iv, nbytes, encdec, 4);
++}
++#endif
++
++/** \fn void des_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief encrypt DES_BLOCK_SIZE of data
++ *  \param tfm linux crypto algo transform
++ *  \param out output bytestream
++ *  \param in input bytestream
++*/
++static void des_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++{
++	struct des_ctx *ctx = crypto_tfm_ctx(tfm);
++	DPRINTF(0, "ctx @%p\n", ctx);
++	deu_des(ctx, out, in, NULL, DES_BLOCK_SIZE, CRYPTO_DIR_ENCRYPT, 0);
++}
++
++/** \fn void des_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief encrypt DES_BLOCK_SIZE of data
++ *  \param tfm linux crypto algo transform
++ *  \param out output bytestream
++ *  \param in input bytestream
++*/
++static void des_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
++{
++	struct des_ctx *ctx = crypto_tfm_ctx(tfm);
++	DPRINTF(0, "ctx @%p\n", ctx);
++	deu_des(ctx, out, in, NULL, DES_BLOCK_SIZE, CRYPTO_DIR_DECRYPT, 0);
++}
++
++/*
++ *   \brief RFC2451:
++ *
++ *   For DES-EDE3, there is no known need to reject weak or
++ *   complementation keys.  Any weakness is obviated by the use of
++ *   multiple keys.
++ *
++ *   However, if the first two or last two independent 64-bit keys are
++ *   equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
++ *   same as DES.  Implementers MUST reject keys that exhibit this
++ *   property.
++ *
++ */
++
++/** \fn int des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief sets 3DES key
++ *  \param tfm linux crypto algo transform
++ *  \param key input key
++ *  \param keylen key length
++*/
++static int des3_ede_setkey(struct crypto_tfm *tfm,
++			   const u8 *key,
++			   unsigned int key_len)
++{
++	struct des_ctx *ctx = crypto_tfm_ctx(tfm);
++
++	DPRINTF(0, "ctx @%p, key_len %d\n", ctx, key_len);
++
++	ctx->controlr_M = key_len / 8 + 1; /* 3DES EDE1 / EDE2 / EDE3 Mode */
++	ctx->key_length = key_len;
++
++	memcpy((u8 *)(ctx->expkey), key, key_len);
++
++	return 0;
++}
++
++/*
++ * \brief DES function mappings
++*/
++static struct crypto_alg des_alg = {
++	.cra_name		= "des",
++	.cra_driver_name	= "lq_deu-des",
++	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
++	.cra_blocksize		= DES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct des_ctx),
++	.cra_module		= THIS_MODULE,
++	.cra_alignmask		= 3,
++	.cra_list		= LIST_HEAD_INIT(des_alg.cra_list),
++	.cra_u			= {
++		.cipher = {
++			.cia_min_keysize	= DES_KEY_SIZE,
++			.cia_max_keysize	= DES_KEY_SIZE,
++			.cia_setkey		= des_setkey,
++			.cia_encrypt		= des_encrypt,
++			.cia_decrypt		= des_decrypt
++		}
++	}
++};
++
++/*
++ * \brief DES function mappings
++*/
++static struct crypto_alg des3_ede_alg = {
++	.cra_name		= "des3_ede",
++	.cra_driver_name	= "lq_deu-des3_ede",
++	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
++	.cra_blocksize		= DES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct des_ctx),
++	.cra_module		= THIS_MODULE,
++	.cra_alignmask		= 3,
++	.cra_list		= LIST_HEAD_INIT(des3_ede_alg.cra_list),
++	.cra_u			= {
++		.cipher = {
++			.cia_min_keysize	= DES_KEY_SIZE,
++			.cia_max_keysize	= DES_KEY_SIZE,
++			.cia_setkey		= des3_ede_setkey,
++			.cia_encrypt		= des_encrypt,
++			.cia_decrypt		= des_decrypt
++		}
++	}
++};
++
++/** \fn int ecb_des_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief ECB DES encrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++*/
++static int ecb_des_encrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	DPRINTF(0, "ctx @%p\n", ctx);
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		nbytes -= (nbytes % DES_BLOCK_SIZE);
++		deu_des_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    NULL, nbytes, CRYPTO_DIR_ENCRYPT, 0);
++		nbytes &= DES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/** \fn int ecb_des_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief ECB DES decrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int ecb_des_decrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	DPRINTF(0, "ctx @%p\n", ctx);
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		nbytes -= (nbytes % DES_BLOCK_SIZE);
++		deu_des_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    NULL, nbytes, CRYPTO_DIR_DECRYPT, 0);
++		nbytes &= DES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/*
++ * \brief DES function mappings
++*/
++static struct crypto_alg ecb_des_alg = {
++	.cra_name		= "ecb(des)",
++	.cra_driver_name	= "lq_deu-ecb(des)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= DES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct des_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(ecb_des_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= DES_KEY_SIZE,
++			.max_keysize	= DES_KEY_SIZE,
++			.setkey		= des_setkey,
++			.encrypt	= ecb_des_encrypt,
++			.decrypt	= ecb_des_decrypt,
++		}
++	}
++};
++
++/*
++ * \brief DES function mappings
++*/
++static struct crypto_alg ecb_des3_ede_alg = {
++	.cra_name		= "ecb(des3_ede)",
++	.cra_driver_name	= "lq_deu-ecb(des3_ede)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= DES3_EDE_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct des_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(ecb_des3_ede_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= DES3_EDE_KEY_SIZE,
++			.max_keysize	= DES3_EDE_KEY_SIZE,
++			.setkey		= des3_ede_setkey,
++			.encrypt	= ecb_des_encrypt,
++			.decrypt	= ecb_des_decrypt,
++		}
++	}
++};
++
++/** \fn int cbc_des_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief CBC DES encrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int cbc_des_encrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	DPRINTF(0, "ctx @%p\n", ctx);
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		u8 *iv = walk.iv;
++		/* printk("iv = %08x\n", *(u32 *)iv); */
++		nbytes -= (nbytes % DES_BLOCK_SIZE);
++		deu_des_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
++		nbytes &= DES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/** \fn int cbc_des_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief CBC DES decrypt using linux crypto blkcipher
++ *  \param desc blkcipher descriptor
++ *  \param dst output scatterlist
++ *  \param src input scatterlist
++ *  \param nbytes data size in bytes
++ *  \return err
++*/
++static int cbc_des_decrypt(struct blkcipher_desc *desc,
++			   struct scatterlist *dst,
++			   struct scatterlist *src,
++			   unsigned int nbytes)
++{
++	struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
++	struct blkcipher_walk walk;
++	int err;
++
++	DPRINTF(0, "ctx @%p\n", ctx);
++
++	blkcipher_walk_init(&walk, dst, src, nbytes);
++	err = blkcipher_walk_virt(desc, &walk);
++
++	while ((nbytes = walk.nbytes)) {
++		u8 *iv = walk.iv;
++		/* printk("iv = %08x\n", *(u32 *)iv); */
++		nbytes -= (nbytes % DES_BLOCK_SIZE);
++		deu_des_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
++			    iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
++		nbytes &= DES_BLOCK_SIZE - 1;
++		err = blkcipher_walk_done(desc, &walk, nbytes);
++	}
++
++	return err;
++}
++
++/*
++ * \brief DES function mappings
++*/
++static struct crypto_alg cbc_des_alg = {
++	.cra_name		= "cbc(des)",
++	.cra_driver_name	= "lq_deu-cbc(des)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= DES_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct des_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(cbc_des_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= DES_KEY_SIZE,
++			.max_keysize	= DES_KEY_SIZE,
++			.ivsize		= DES_BLOCK_SIZE,
++			.setkey		= des_setkey,
++			.encrypt	= cbc_des_encrypt,
++			.decrypt	= cbc_des_decrypt,
++		}
++	}
++};
++
++/*
++ * \brief DES function mappings
++*/
++static struct crypto_alg cbc_des3_ede_alg = {
++	.cra_name		= "cbc(des3_ede)",
++	.cra_driver_name	= "lq_deu-cbc(des3_ede)",
++	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
++	.cra_blocksize		= DES3_EDE_BLOCK_SIZE,
++	.cra_ctxsize		= sizeof(struct des_ctx),
++	.cra_type		= &crypto_blkcipher_type,
++	.cra_module		= THIS_MODULE,
++	.cra_list		= LIST_HEAD_INIT(cbc_des3_ede_alg.cra_list),
++	.cra_u			= {
++		.blkcipher = {
++			.min_keysize	= DES3_EDE_KEY_SIZE,
++			.max_keysize	= DES3_EDE_KEY_SIZE,
++			.ivsize		= DES_BLOCK_SIZE,
++			.setkey		= des3_ede_setkey,
++			.encrypt	= cbc_des_encrypt,
++			.decrypt	= cbc_des_decrypt,
++		}
++	}
++};
++
++/** \fn int lq_deu_init_des(void)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief initialize des driver
++*/
++int lq_deu_init_des(void)
++{
++	int ret = 0;
++
++	ret = crypto_register_alg(&des_alg);
++	if (ret < 0)
++		goto des_err;
++
++	ret = crypto_register_alg(&ecb_des_alg);
++	if (ret < 0)
++		goto ecb_des_err;
++
++	ret = crypto_register_alg(&cbc_des_alg);
++	if (ret < 0)
++		goto cbc_des_err;
++
++	ret = crypto_register_alg(&des3_ede_alg);
++	if (ret < 0)
++		goto des3_ede_err;
++
++	ret = crypto_register_alg(&ecb_des3_ede_alg);
++	if (ret < 0)
++		goto ecb_des3_ede_err;
++
++	ret = crypto_register_alg(&cbc_des3_ede_alg);
++	if (ret < 0)
++		goto cbc_des3_ede_err;
++
++	deu_des_chip_init();
++
++	CRTCL_SECT_INIT;
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	if (ALLOCATE_MEMORY(BUFFER_IN, DES_ALGO) < 0) {
++		printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
++		       __FILE__, __func__, __LINE__);
++		goto cbc_des3_ede_err;
++	}
++	if (ALLOCATE_MEMORY(BUFFER_OUT, DES_ALGO) < 0) {
++		printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
++		       __FILE__, __func__, __LINE__);
++		goto cbc_des3_ede_err;
++	}
++#endif
++
++	printk(KERN_NOTICE "Lantiq DEU DES initialized%s.\n",
++	       disable_deudma ? "" : " (DMA)");
++	return ret;
++
++des_err:
++	crypto_unregister_alg(&des_alg);
++	printk(KERN_ERR "Lantiq des initialization failed!\n");
++
++	return ret;
++
++ecb_des_err:
++	crypto_unregister_alg(&ecb_des_alg);
++	printk(KERN_ERR "Lantiq ecb_des initialization failed!\n");
++
++	return ret;
++
++cbc_des_err:
++	crypto_unregister_alg(&cbc_des_alg);
++	printk(KERN_ERR "Lantiq cbc_des initialization failed!\n");
++
++	return ret;
++
++des3_ede_err:
++	crypto_unregister_alg(&des3_ede_alg);
++	printk(KERN_ERR "Lantiq des3_ede initialization failed!\n");
++
++	return ret;
++
++ecb_des3_ede_err:
++	crypto_unregister_alg(&ecb_des3_ede_alg);
++	printk(KERN_ERR "Lantiq ecb_des3_ede initialization failed!\n");
++
++	return ret;
++
++cbc_des3_ede_err:
++	crypto_unregister_alg(&cbc_des3_ede_alg);
++	printk(KERN_ERR "Lantiq cbc_des3_ede initialization failed!\n");
++
++	return ret;
++}
++
++/** \fn void lq_deu_fini_des(void)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief unregister des driver
++*/
++void lq_deu_fini_des(void)
++{
++	crypto_unregister_alg(&des_alg);
++	crypto_unregister_alg(&ecb_des_alg);
++	crypto_unregister_alg(&cbc_des_alg);
++	crypto_unregister_alg(&des3_ede_alg);
++	crypto_unregister_alg(&ecb_des3_ede_alg);
++	crypto_unregister_alg(&cbc_des3_ede_alg);
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	FREE_MEMORY(des_buff_in);
++	FREE_MEMORY(des_buff_out);
++#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA_DANUBE */
++}
++
++#endif
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu.c
+@@ -0,0 +1,195 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file deu.c
++  \ingroup LQ_DEU
++  \brief main DEU driver file
++*/
++
++/**
++ \defgroup LQ_DEU_FUNCTIONS LQ_DEU_FUNCTIONS
++ \ingroup LQ_DEU
++ \brief Lantiq DEU functions
++*/
++
++#include <linux/version.h>
++#if defined(CONFIG_MODVERSIONS)
++#define MODVERSIONS
++#include <linux/modversions.h>
++#endif
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/crypto.h>
++#include <linux/proc_fs.h>
++#include <linux/fs.h>       /* Stuff about file systems that we need */
++#include <asm/byteorder.h>
++
++#if 0
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++#	include <lq_pmu.h>
++#endif
++#endif
++
++#include "deu.h"
++
++struct lq_crypto_priv lq_crypto_ops;
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++int disable_deudma = 0;
++#else
++int disable_deudma = 1;
++#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA */
++
++#ifdef CRYPTO_DEBUG
++char deu_debug_level = 3;
++#endif
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_MODULE
++#	define STATIC static
++#else
++#	define STATIC
++#endif
++
++/** \fn static int lq_deu_init(void)
++ *  \ingroup LQ_DEU_FUNCTIONS
++ *  \brief link all modules that have been selected in kernel config for Lantiq HW crypto support
++ *  \return ret
++*/
++int lq_deu_init(void)
++{
++	int ret = -ENOSYS;
++	u32 config;
++
++	printk(KERN_INFO "Lantiq crypto hardware driver version %s\n",
++	       LQ_DEU_DRV_VERSION);
++
++	config = deu_chip_init();
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	deu_dma_init();
++#endif
++
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_AES)
++	if(config & LQ_DEU_ID_AES) {
++		if ((ret = lq_deu_init_aes())) {
++			printk(KERN_ERR "Lantiq AES initialization failed!\n");
++		}
++	} else {
++		printk(KERN_ERR "Lantiq AES not supported!\n");
++	}
++#endif
++
++#ifdef CONFIG_SOL_LANTIQ_XWAY
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_DES)
++	if(config & LQ_DEU_ID_DES) {
++		if ((ret = lq_deu_init_des())) {
++			printk(KERN_ERR "Lantiq DES initialization failed!\n");
++		}
++	} else {
++		printk(KERN_ERR "Lantiq DES not supported!\n");
++	}
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_ARC4) && defined(CONFIG_CRYPTO_DEV_LANTIQ_DMA)
++	if ((ret = lq_deu_init_arc4())) {
++		printk(KERN_ERR "Lantiq ARC4 initialization failed!\n");
++	}
++#endif
++#endif
++
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1)
++	if(config & LQ_DEU_ID_HASH) {
++		if ((ret = lq_deu_init_sha1())) {
++			printk(KERN_ERR "Lantiq SHA1 initialization failed!\n");
++		}
++	} else {
++		printk(KERN_ERR "Lantiq SHA1 not supported!\n");
++	}
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5)
++	if(config & LQ_DEU_ID_HASH) {
++		if ((ret = lq_deu_init_md5())) {
++			printk(KERN_ERR "Lantiq MD5 initialization failed!\n");
++		}
++	} else {
++		printk(KERN_ERR "Lantiq MD5 not supported!\n");
++	}
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC)
++	if ((ret = lq_deu_init_sha1_hmac())) {
++		printk(KERN_ERR "Lantiq SHA1_HMAC initialization failed!\n");
++	}
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5_HMAC)
++	if ((ret = lq_deu_init_md5_hmac())) {
++		printk(KERN_ERR "Lantiq MD5_HMAC initialization failed!\n");
++	}
++#endif
++	return ret;
++}
++
++/** \fn static void lq_deu_fini(void)
++ *  \ingroup LQ_DEU_FUNCTIONS
++ *  \brief remove the loaded crypto algorithms
++*/
++void lq_deu_exit(void)
++{
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_AES)
++	lq_deu_fini_aes();
++#endif
++#ifdef CONFIG_SOL_LANTIQ_XWAY
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_DES)
++	lq_deu_fini_des();
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_ARC4) \
++	&& defined(CONFIG_CRYPTO_DEV_LANTIQ_DMA)
++	lq_deu_fini_arc4();
++#endif
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1)
++	lq_deu_fini_sha1();
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5)
++	lq_deu_fini_md5();
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC)
++	lq_deu_fini_sha1_hmac();
++#endif
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5_HMAC)
++	lq_deu_fini_md5_hmac();
++#endif
++
++	printk("DEU has exited successfully\n");
++
++#if defined(CONFIG_CRYPTO_DEV_LANTIQ_DMA)
++	deu_dma_exit();
++	printk("DMA has deregistered successfully\n");
++#endif
++}
++
++EXPORT_SYMBOL(lq_deu_init);
++EXPORT_SYMBOL(lq_deu_exit);
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu.h
+@@ -0,0 +1,248 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup  API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file deu.h
++  \brief Main DEU driver header file
++*/
++
++/**
++  \defgroup LQ_DEU_DEFINITIONS LQ_DEU_DEFINITIONS
++  \ingroup  LQ_DEU
++  \brief Lantiq DEU definitions
++*/
++
++
++#ifndef DEU_H
++#define DEU_H
++
++#undef CRYPTO_DEBUG
++
++#define LQ_DEU_DRV_VERSION		"1.0.1"
++
++#if defined(CONFIG_LANTIQ_DANUBE)
++#	include "deu_danube.h"
++#elif defined(CONFIG_LANTIQ_AR9)
++#	include "deu_ar9.h"
++#elif defined(CONFIG_SOC_LANTIQ_FALCON)
++#	include "deu_falcon.h"
++#else
++//#	error "Unknown platform"
++#	include "deu_danube.h"
++#endif
++
++struct lq_crypto_priv {
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	u32 *des_buff_in;
++	u32 *des_buff_out;
++	u32 *aes_buff_in;
++	u32 *aes_buff_out;
++
++	int (*dma_init)(void);
++	void (*dma_exit)(void);
++	u32 (*dma_align)(const u8 *, u32 *, int, int);
++	void (*aes_dma_memcpy)(u32 *, u32 *, u8 *, int);
++	void (*des_dma_memcpy)(u32 *, u32 *, u8 *, int);
++	int (*aes_dma_malloc)(int);
++	int (*des_dma_malloc)(int);
++	void (*dma_free)(u32 *);
++#endif
++
++	u32 (*endian_swap)(u32);
++	u32 (*input_swap)(u32);
++	void (*aes_chip_init)(void);
++	void (*des_chip_init)(void);
++	u32 (*chip_init)(void);
++};
++
++extern struct lq_crypto_priv lq_crypto_ops;
++
++#define LQ_DEU_ALIGNMENT		16
++
++#define PFX				"lq_deu: "
++
++#define LQ_DEU_CRA_PRIORITY		300
++#define LQ_DEU_COMPOSITE_PRIORITY	400
++
++#define CRYPTO_DIR_ENCRYPT		1
++#define CRYPTO_DIR_DECRYPT		0
++
++#define CRTCL_SECT_INIT		spin_lock_init(&cipher_lock)
++#define CRTCL_SECT_START	spin_lock_irqsave(&cipher_lock, flag)
++#define CRTCL_SECT_END		spin_unlock_irqrestore(&cipher_lock, flag)
++
++#define LQ_DEU_ID_REV		0x00001F
++#define LQ_DEU_ID_ID		0x00FF00
++#define LQ_DEU_ID_DMA		0x010000
++#define LQ_DEU_ID_HASH		0x020000
++#define LQ_DEU_ID_AES		0x040000
++#define LQ_DEU_ID_3DES		0x080000
++#define LQ_DEU_ID_DES		0x100000
++
++extern int disable_deudma;
++
++int lq_deu_init(void);
++void lq_deu_exit(void);
++
++int lq_deu_init_des(void);
++int lq_deu_init_aes(void);
++int lq_deu_init_arc4(void);
++int lq_deu_init_sha1(void);
++int lq_deu_init_md5(void);
++int lq_deu_init_sha1_hmac(void);
++int lq_deu_init_md5_hmac(void);
++
++void lq_deu_fini_des(void);
++void lq_deu_fini_aes(void);
++void lq_deu_fini_arc4(void);
++void lq_deu_fini_sha1(void);
++void lq_deu_fini_md5(void);
++void lq_deu_fini_sha1_hmac(void);
++void lq_deu_fini_md5_hmac(void);
++
++/* board specific functions */
++/* { */
++static inline u32 deu_chip_init(void)
++{
++	return lq_crypto_ops.chip_init();
++}
++
++static inline void deu_des_chip_init(void)
++{
++	lq_crypto_ops.des_chip_init();
++}
++
++static inline void deu_aes_chip_init(void)
++{
++	lq_crypto_ops.aes_chip_init();
++}
++
++static inline u32 deu_input_swap(u32 input)
++{
++	return lq_crypto_ops.input_swap(input);
++}
++
++static inline u32 deu_endian_swap(u32 input)
++{
++	return lq_crypto_ops.endian_swap(input);
++}
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++static inline int deu_aes_dma_malloc(int value)
++{
++	return lq_crypto_ops.aes_dma_malloc(value);
++}
++
++static inline int deu_des_dma_malloc(int value)
++{
++	return lq_crypto_ops.des_dma_malloc(value);
++}
++
++static inline u32 *deu_dma_align(const u8 *arg,
++				  u32 *buff_alloc,
++				  int in_out,
++				  int nbytes)
++{
++	return lq_crypto_ops.dma_align(arg, buff_alloc, in_out, nbytes);
++}
++
++static inline void deu_aes_dma_memcpy(u32 *outcopy,
++				       u32 *out_dma,
++				       u8 *out_arg,
++				       int nbytes)
++{
++	lq_crypto_ops.aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes);
++}
++
++static inline void deu_des_dma_memcpy(u32 *outcopy,
++				       u32 *out_dma,
++				       u8 *out_arg,
++				       int nbytes)
++{
++	lq_crypto_ops.des_dma_memcpy(outcopy, out_dma, out_arg, nbytes);
++}
++
++static inline void deu_dma_free(u32 *addr)
++{
++	lq_crypto_ops.dma_free(addr);
++}
++
++static inline int deu_dma_init(void)
++{
++	lq_crypto_ops.dma_init();
++}
++
++static inline void deu_dma_exit(void)
++{
++	lq_crypto_ops.dma_exit();
++}
++#endif
++
++/* } */
++
++#define DEU_WAKELIST_INIT(queue) \
++	init_waitqueue_head(&queue)
++
++#define DEU_WAIT_EVENT_TIMEOUT(queue, event, flags, timeout) \
++	do { \
++		wait_event_interruptible_timeout((queue), \
++						 test_bit((event), \
++						 &(flags)), (timeout)); \
++		clear_bit((event), &(flags)); \
++	}while (0)
++
++
++#define DEU_WAKEUP_EVENT(queue, event, flags) \
++	do { \
++		set_bit((event), &(flags)); \
++		wake_up_interruptible(&(queue)); \
++	}while (0)
++
++#define DEU_WAIT_EVENT(queue, event, flags) \
++	do { \
++		wait_event_interruptible(queue, \
++					 test_bit((event), &(flags))); \
++		clear_bit((event), &(flags)); \
++	}while (0)
++
++struct deu_drv_priv {
++	wait_queue_head_t  deu_thread_wait;
++#define DEU_EVENT	1
++	volatile  long     deu_event_flags;
++	u8                 *deu_rx_buf;
++	u32                deu_rx_len;
++};
++
++#ifdef CRYPTO_DEBUG
++extern char deu_debug_level;
++#	define DPRINTF(level, format, args...) \
++	if (level < deu_debug_level) \
++		printk(KERN_INFO "[%s %s %d]: " format, \
++		       __FILE__, __func__, __LINE__, ##args)
++#else
++#	define DPRINTF(level, format, args...) do { } while(0)
++#endif
++
++#endif	/* DEU_H */
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_ar9.c
+@@ -0,0 +1,327 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <asm/io.h> /* dma_cache_inv */
++#include <linux/platform_device.h>
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++
++#include "deu.h"
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file deu_ar9.c
++  \brief Lantiq DEU board specific driver file for ar9
++*/
++
++/**
++ \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
++ \ingroup LQ_DEU
++ \brief board specific functions
++*/
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++struct lq_deu_device lq_deu[1];
++
++static u8 *g_dma_page_ptr = NULL;
++static u8 *g_dma_block = NULL;
++static u8 *g_dma_block2 = NULL;
++
++/** \fn int dma_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief Initialize DMA for DEU usage. DMA specific registers are
++ *         intialized here, including a pointer to the device, memory
++ *         space for the device and DEU-DMA descriptors
++ *  \return -1: fail, 0: SUCCESS
++*/
++static int dma_init(void)
++{
++	volatile struct deu_dma *dma = (struct deu_dma *) LQ_DEU_DMA_CON;
++	struct dma_device_info *dma_device = NULL;
++	int i = 0;
++
++	struct dma_device_info *deu_dma_device_ptr;
++
++	/* get one free page and share between g_dma_block and g_dma_block2 */
++	printk("PAGE_SIZE = %ld\n", PAGE_SIZE);
++	/* need 16-byte alignment memory block */
++	g_dma_page_ptr = (u8 *)__get_free_page(GFP_KERNEL);
++	/* need 16-byte alignment memory block */
++	g_dma_block = g_dma_page_ptr;
++	/* need 16-byte alignment memory block */
++	g_dma_block2 = (u8 *)(g_dma_page_ptr + (PAGE_SIZE >> 1));
++
++	/* deu_dma_priv_init(); */
++
++	deu_dma_device_ptr = dma_device_reserve("DEU");
++	if (!deu_dma_device_ptr) {
++		printk("DEU: reserve DMA fail!\n");
++		return -1;
++	}
++	lq_deu[0].dma_device = deu_dma_device_ptr;
++
++	dma_device = deu_dma_device_ptr;
++	/* dma_device->priv = &deu_dma_priv; */
++	dma_device->buffer_alloc = &deu_dma_buffer_alloc;
++	dma_device->buffer_free = &deu_dma_buffer_free;
++	dma_device->intr_handler = &deu_dma_intr_handler;
++
++	dma_device->tx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
++	dma_device->rx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
++	dma_device->port_num = 1;
++	dma_device->tx_burst_len = 2;
++	dma_device->rx_burst_len = 2;
++	dma_device->max_rx_chan_num = 1;
++	dma_device->max_tx_chan_num = 1;
++	dma_device->port_packet_drop_enable = 0;
++
++	for (i = 0; i < dma_device->max_rx_chan_num; i++) {
++		dma_device->rx_chan[i]->packet_size = DEU_MAX_PACKET_SIZE;
++		dma_device->rx_chan[i]->desc_len = 1;
++		dma_device->rx_chan[i]->control = LQ_DMA_CH_ON;
++		dma_device->rx_chan[i]->byte_offset = 0;
++		dma_device->rx_chan[i]->chan_poll_enable = 1;
++	}
++
++	for (i = 0; i < dma_device->max_tx_chan_num; i++) {
++		dma_device->tx_chan[i]->control = LQ_DMA_CH_ON;
++		dma_device->tx_chan[i]->desc_len = 1;
++		dma_device->tx_chan[i]->chan_poll_enable = 1;
++	}
++
++	dma_device->current_tx_chan = 0;
++	dma_device->current_rx_chan = 0;
++
++	i = dma_device_register(dma_device);
++	for (i = 0; i < dma_device->max_rx_chan_num; i++) {
++		(dma_device->rx_chan[i])->open(dma_device->rx_chan[i]);
++	}
++
++	dma->ctrl.BS = 0;
++	dma->ctrl.RXCLS = 0;
++	dma->ctrl.EN = 1;
++
++	return 0;
++}
++
++/** \fn u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief  Not used for AR9
++ *  \param arg Pointer to the input / output memory address
++ *  \param buffer_alloc A pointer to the buffer
++ *  \param in_buff Input (if == 1) or Output (if == 0) buffer
++ *  \param nbytes Number of bytes of data
++*/
++static u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
++{
++	return (u32 *) arg;
++}
++
++/** \fn void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief copy the DMA data to the memory address space for AES
++ *  \param outcopy Not used
++ *  \param out_dma A pointer to the memory address that stores the DMA data
++ *  \param out_arg The pointer to the memory address that needs to be copied to]
++ *  \param nbytes Number of bytes of data
++*/
++static void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++{
++	memcpy(out_arg, out_dma, nbytes);
++}
++
++/** \fn void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief copy the DMA data to the memory address space for DES
++ *  \param outcopy Not used
++ *  \param out_dma A pointer to the memory address that stores the DMA data
++ *  \param out_arg The pointer to the memory address that needs to be copied to]
++ *  \param nbytes Number of bytes of data
++*/
++static void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++{
++	memcpy(out_arg, out_dma, nbytes);
++}
++
++/** \fn dma_exit(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief unregister dma devices after exit
++*/
++static void dma_exit(void)
++{
++	if (g_dma_page_ptr)
++		free_page((u32) g_dma_page_ptr);
++	dma_device_release(lq_deu[0].dma_device);
++	dma_device_unregister(lq_deu[0].dma_device);
++}
++#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA */
++
++/** \fn u32 endian_swap(u32 input)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief Swap data given to the function
++ *  \param input   Data input to be swapped
++ *  \return either the swapped data or the input data depending on whether it is in DMA mode or FPI mode
++*/
++static u32 endian_swap(u32 input)
++{
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	u8 *ptr = (u8 *)&input;
++	return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
++#else
++	return input;
++#endif
++}
++
++/** \fn u32 input_swap(u32 input)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief Not used
++ *  \return input
++*/
++static u32 input_swap(u32 input)
++{
++	return input;
++}
++
++/** \fn void aes_chip_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief initialize AES hardware
++*/
++static void aes_chip_init(void)
++{
++	volatile struct deu_aes *aes = (struct deu_aes *) AES_START;
++
++	aes->ctrl.SM = 1;
++#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	aes->ctrl.ARS = 1;
++#else
++	aes->ctrl.NDC = 1; /* to write to ENDI */
++	asm("sync");
++	aes->ctrl.ENDI = 0;
++	asm("sync");
++	aes->ctrl.ARS = 0; /* 0 for dma */
++	asm("sync");
++#endif
++}
++
++/** \fn void des_chip_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief initialize DES hardware
++*/
++static void des_chip_init(void)
++{
++	volatile struct deu_des *des = (struct deu_des *) DES_3DES_START;
++
++#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	/* start crypto engine with write to ILR */
++	des->ctrl.SM = 1;
++	asm("sync");
++	des->ctrl.ARS = 1;
++#else
++	des->ctrl.SM = 1;
++	des->ctrl.NDC = 1;
++	asm("sync");
++	des->ctrl.ENDI = 0;
++	asm("sync");
++	des->ctrl.ARS = 0; /* 0 for dma */
++
++#endif
++}
++
++static u32 chip_init(void)
++{
++	volatile struct deu_clk_ctrl *clc = (struct deu_clk_ctrl *) LQ_DEU_CLK;
++
++#if 0
++	lq_pmu_enable(1<<20);
++#endif
++
++	clc->FSOE = 0;
++	clc->SBWE = 0;
++	clc->SPEN = 0;
++	clc->SBWE = 0;
++	clc->DISS = 0;
++	clc->DISR = 0;
++
++	return *LQ_DEU_ID;
++}
++
++static int lq_crypto_probe(struct platform_device *pdev)
++{
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	lq_crypto_ops.dma_init = dma_init;
++	lq_crypto_ops.dma_exit = dma_exit;
++	lq_crypto_ops.aes_dma_memcpy = aes_dma_memcpy;
++	lq_crypto_ops.des_dma_memcpy = des_dma_memcpy;
++	lq_crypto_ops.aes_dma_malloc = aes_dma_malloc;
++	lq_crypto_ops.des_dma_malloc = des_dma_malloc;
++	lq_crypto_ops.dma_align = dma_align;
++	lq_crypto_ops.dma_free = dma_free;
++#endif
++
++	lq_crypto_ops.endian_swap = endian_swap;
++	lq_crypto_ops.input_swap = input_swap;
++	lq_crypto_ops.aes_chip_init = aes_chip_init;
++	lq_crypto_ops.des_chip_init = des_chip_init;
++	lq_crypto_ops.chip_init = chip_init;
++
++	printk("lq_ar9_deu: driver loaded!\n");
++
++	lq_deu_init();
++
++	return 0;
++}
++
++static int lq_crypto_remove(struct platform_device *pdev)
++{
++	lq_deu_exit();
++
++	return 0;
++}
++
++static struct platform_driver lq_crypto = {
++	.probe	= lq_crypto_probe,
++	.remove	= lq_crypto_remove,
++	.driver	= {
++		.owner	= THIS_MODULE,
++		.name	= "lq_ar9_deu"
++	}
++};
++
++static int __init lq_crypto_init(void)
++{
++	return platform_driver_register(&lq_crypto);
++}
++module_init(lq_crypto_init);
++
++static void __exit lq_crypto_exit(void)
++{
++	platform_driver_unregister(&lq_crypto);
++}
++module_exit(lq_crypto_exit);
++
++#endif
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_ar9.h
+@@ -0,0 +1,291 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus / Infineon Technologies
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief DEU driver module
++*/
++
++/**
++  \defgroup LQ_DEU_DEFINITIONS LQ_DEU_DEFINITIONS
++  \ingroup LQ_DEU
++  \brief Lantiq DEU definitions
++*/
++
++/**
++  \file deu_ar9.h
++  \brief DEU driver header file
++*/
++
++
++#ifndef DEU_AR9_H
++#define DEU_AR9_H
++
++#define LQ_DEU_BASE_ADDR       (KSEG1 | 0x1E103100)
++#define LQ_DEU_CLK             ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0000))
++#define LQ_DEU_ID              ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0008))
++#define LQ_DES_CON             ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0010))
++#define LQ_AES_CON             ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0050))
++#define LQ_HASH_CON            ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x00B0))
++#define LQ_ARC4_CON            ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0100))
++
++#define ARC4_START		LQ_ARC4_CON
++#define DES_3DES_START		LQ_DES_CON
++#define HASH_START		LQ_HASH_CON
++#define AES_START		LQ_AES_CON
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++#	include "deu_dma.h"
++#	define DEU_DWORD_REORDERING(ptr, buffer, in_out, bytes) \
++		deu_dma_align(ptr, buffer, in_out, bytes)
++#	define AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
++		deu_aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
++#	define DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
++		deu_des_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
++#	define BUFFER_IN			1
++#	define BUFFER_OUT			0
++#	define AES_ALGO				1
++#	define DES_ALGO				0
++#	define ALLOCATE_MEMORY(val, type)	1
++#	define FREE_MEMORY(buff)
++extern struct lq_deu_device lq_deu[1];
++#endif /* CONFIG_CRYPTO_DEV_DMA */
++
++/* SHA CONSTANTS */
++#define HASH_CON_VALUE				0x0700002C
++
++#define INPUT_ENDIAN_SWAP(input)		deu_input_swap(input)
++#define DEU_ENDIAN_SWAP(input)			deu_endian_swap(input)
++#define DELAY_PERIOD				10
++#define FIND_DEU_CHIP_VERSION			chip_version()
++
++#define WAIT_AES_DMA_READY() \
++	do { \
++		int i; \
++		volatile struct deu_dma *dma = \
++			(struct deu_dma *) LQ_DEU_DMA_CON; \
++		volatile struct deu_aes *aes = \
++			(volatile struct deu_aes *) AES_START; \
++		for (i = 0; i < 10; i++) \
++			udelay(DELAY_PERIOD); \
++		while (dma->ctrl.BSY) {}; \
++		while (aes->ctrl.BUS) {}; \
++	} while (0)
++
++#define WAIT_DES_DMA_READY() \
++	do { \
++		int i; \
++		volatile struct deu_dma *dma = \
++			(struct deu_dma *) LQ_DEU_DMA_CON; \
++		volatile struct deu_des *des = \
++			(struct deu_des *) DES_3DES_START; \
++		for (i = 0; i < 10; i++) \
++			udelay(DELAY_PERIOD); \
++		while (dma->ctrl.BSY) {}; \
++		while (des->ctrl.BUS) {}; \
++	} while (0)
++
++#define AES_DMA_MISC_CONFIG() \
++	do { \
++		volatile struct deu_aes *aes = \
++			(volatile struct deu_aes *) AES_START; \
++		aes->ctrl.KRE = 1; \
++		aes->ctrl.GO = 1; \
++	} while(0)
++
++#define SHA_HASH_INIT \
++	do { \
++		volatile struct deu_hash *hash = \
++			(struct deu_hash *) HASH_START; \
++		hash->ctrl.SM = 1; \
++		hash->ctrl.ALGO = 0; \
++		hash->ctrl.INIT = 1; \
++	} while(0)
++
++/* DEU Common Structures for AR9*/
++
++struct deu_clk_ctrl {
++	u32 Res:26;
++	u32 FSOE:1;
++	u32 SBWE:1;
++	u32 EDIS:1;
++	u32 SPEN:1;
++	u32 DISS:1;
++	u32 DISR:1;
++};
++
++struct deu_des {
++	struct deu_des_ctrl {	/* 10h */
++		u32 KRE:1;
++		u32 reserved1:5;
++		u32 GO:1;
++		u32 STP:1;
++		u32 Res2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 Res3:2;
++		u32 F:3;
++		u32 O:3;
++		u32 BUS:1;
++		u32 DAU:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 E_D:1;
++		u32 M:3;
++	} ctrl;
++
++	u32 IHR;		/* 14h */
++	u32 ILR;		/* 18h */
++	u32 K1HR;		/* 1c */
++	u32 K1LR;
++	u32 K2HR;
++	u32 K2LR;
++	u32 K3HR;
++	u32 K3LR;		/* 30h */
++	u32 IVHR;		/* 34h */
++	u32 IVLR;		/* 38 */
++	u32 OHR;		/* 3c */
++	u32 OLR;		/* 40 */
++};
++
++struct deu_aes {
++	struct deu_aes_ctrl {
++		u32 KRE:1;
++		u32 reserved1:4;
++		u32 PNK:1;
++		u32 GO:1;
++		u32 STP:1;
++		u32 reserved2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved3:2;
++		u32 F:3;	/* fbs */
++		u32 O:3;	/* om */
++		u32 BUS:1;	/* bsy */
++		u32 DAU:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 E_D:1;
++		u32 KV:1;
++		u32 K:2;	/* KL */
++	} ctrl;
++
++	u32 ID3R;		/* 80h */
++	u32 ID2R;		/* 84h */
++	u32 ID1R;		/* 88h */
++	u32 ID0R;		/* 8Ch */
++	u32 K7R;		/* 90h */
++	u32 K6R;		/* 94h */
++	u32 K5R;		/* 98h */
++	u32 K4R;		/* 9Ch */
++	u32 K3R;		/* A0h */
++	u32 K2R;		/* A4h */
++	u32 K1R;		/* A8h */
++	u32 K0R;		/* ACh */
++	u32 IV3R;		/* B0h */
++	u32 IV2R;		/* B4h */
++	u32 IV1R;		/* B8h */
++	u32 IV0R;		/* BCh */
++	u32 OD3R;		/* D4h */
++	u32 OD2R;		/* D8h */
++	u32 OD1R;		/* DCh */
++	u32 OD0R;		/* E0h */
++};
++
++struct deu_arc4 {
++	struct arc4_controlr {
++		u32 KRE:1;
++		u32 KLEN:4;
++		u32 KSAE:1;
++		u32 GO:1;
++		u32 STP:1;
++		u32 reserved1:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved2:8;
++		u32 BUS:1;	/* bsy */
++		u32 reserved3:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 reserved4:4;
++	} ctrl;
++
++	u32 K3R;		/* 104h */
++	u32 K2R;		/* 108h */
++	u32 K1R;		/* 10Ch */
++	u32 K0R;		/* 110h */
++	u32 IDLEN;		/* 114h */
++	u32 ID3R;		/* 118h */
++	u32 ID2R;		/* 11Ch */
++	u32 ID1R;		/* 120h */
++	u32 ID0R;		/* 124h */
++	u32 OD3R;		/* 128h */
++	u32 OD2R;		/* 12Ch */
++	u32 OD1R;		/* 130h */
++	u32 OD0R;		/* 134h */
++};
++
++struct deu_hash {
++	struct deu_hash_ctrl {
++		u32 reserved1:5;
++		u32 KHS:1;
++		u32 GO:1;
++		u32 INIT:1;
++		u32 reserved2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved3:7;
++		u32 DGRY:1;
++		u32 BSY:1;
++		u32 reserved4:1;
++		u32 IRCL:1;
++		u32 SM:1;
++		u32 KYUE:1;
++		u32 HMEN:1;
++		u32 SSEN:1;
++		u32 ALGO:1;
++	} ctrl;
++
++	u32 MR;			/* B4h */
++	u32 D1R;		/* B8h */
++	u32 D2R;		/* BCh */
++	u32 D3R;		/* C0h */
++	u32 D4R;		/* C4h */
++	u32 D5R;		/* C8h */
++	u32 dummy;		/* CCh */
++	u32 KIDX;		/* D0h */
++	u32 KEY;		/* D4h */
++	u32 DBN;		/* D8h */
++};
++
++struct deu_dma {
++	struct deu_dma_ctrl {
++		u32 reserved1:22;
++		u32 BS:2;
++		u32 BSY:1;
++		u32 reserved2:1;
++		u32 ALGO:2;
++		u32 RXCLS:2;
++		u32 reserved3:1;
++		u32 EN:1;
++	} ctrl;
++};
++
++#endif /* DEU_AR9_H */
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_danube.c
+@@ -0,0 +1,484 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <asm/io.h> /* dma_cache_inv */
++#include <linux/platform_device.h>
++
++#ifdef CONFIG_SOC_LANTIQ_XWAY
++
++#include "deu.h"
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief DEU driver module
++*/
++
++/**
++  \file deu_danube.c
++  \ingroup LQ_DEU
++  \brief board specific DEU driver file for danube
++*/
++
++/**
++  \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
++  \ingroup LQ_DEU
++  \brief board specific DEU functions
++*/
++
++static int danube_pre_1_4;
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++u32 *des_buff_in = NULL;
++u32 *des_buff_out = NULL;
++u32 *aes_buff_in = NULL;
++u32 *aes_buff_out = NULL;
++
++struct lq_deu_device lq_deu[1];
++
++static u8 *g_dma_page_ptr = NULL;
++static u8 *g_dma_block = NULL;
++static u8 *g_dma_block2 = NULL;
++
++/** \fn int dma_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief Initialize DMA for DEU usage. DMA specific registers are
++ *         intialized here, including a pointer to the device, memory
++ *         space for the device and DEU-DMA descriptors
++ *  \return -1 if fail, otherwise return 0
++*/
++static int dma_init(void)
++{
++	struct dma_device_info *dma_device = NULL;
++	int i = 0;
++	volatile struct deu_dma *dma = (struct deu_dma *) LQ_DEU_DMA_CON;
++	struct dma_device_info *deu_dma_device_ptr;
++
++	/* get one free page and share between g_dma_block and g_dma_block2 */
++	printk("PAGE_SIZE = %ld\n", PAGE_SIZE);
++	/* need 16-byte alignment memory block */
++	g_dma_page_ptr = (u8 *)__get_free_page(GFP_KERNEL);
++	/* need 16-byte alignment memory block */
++	g_dma_block = g_dma_page_ptr;
++	/* need 16-byte alignment memory block */
++	g_dma_block2 = (u8 *)(g_dma_page_ptr + (PAGE_SIZE >> 1));
++
++	deu_dma_device_ptr = dma_device_reserve("DEU");
++	if (!deu_dma_device_ptr) {
++		printk("DEU: reserve DMA fail!\n");
++		return -1;
++	}
++	lq_deu[0].dma_device = deu_dma_device_ptr;
++	dma_device = deu_dma_device_ptr;
++	/* dma_device->priv = &deu_dma_priv; */
++	dma_device->buffer_alloc = &deu_dma_buffer_alloc;
++	dma_device->buffer_free = &deu_dma_buffer_free;
++	dma_device->intr_handler = &deu_dma_intr_handler;
++	dma_device->tx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
++	dma_device->rx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
++	dma_device->port_num = 1;
++	dma_device->tx_burst_len = 4;
++	dma_device->max_rx_chan_num = 1;
++	dma_device->max_tx_chan_num = 1;
++	dma_device->port_packet_drop_enable = 0;
++
++	for (i = 0; i < dma_device->max_rx_chan_num; i++) {
++		dma_device->rx_chan[i]->packet_size = DEU_MAX_PACKET_SIZE;
++		dma_device->rx_chan[i]->desc_len = 1;
++		dma_device->rx_chan[i]->control = LQ_DMA_CH_ON;
++		dma_device->rx_chan[i]->byte_offset = 0;
++		dma_device->rx_chan[i]->chan_poll_enable = 1;
++
++	}
++
++	for (i = 0; i < dma_device->max_tx_chan_num; i++) {
++		dma_device->tx_chan[i]->control = LQ_DMA_CH_ON;
++		dma_device->tx_chan[i]->desc_len = 1;
++		dma_device->tx_chan[i]->chan_poll_enable = 1;
++	}
++
++	dma_device->current_tx_chan = 0;
++	dma_device->current_rx_chan = 0;
++
++	dma_device_register(dma_device);
++	for (i = 0; i < dma_device->max_rx_chan_num; i++) {
++		(dma_device->rx_chan[i])->open(dma_device->rx_chan[i]);
++	}
++
++	dma->ctrl.BS = 0;
++	dma->ctrl.RXCLS = 0;
++	dma->ctrl.EN = 1;
++
++
++	*LQ_DMA_PS = 1;
++
++	/* DANUBE PRE 1.4 SOFTWARE FIX */
++	if (danube_pre_1_4)
++		*LQ_DMA_PCTRL = 0x14;
++	else
++		*LQ_DMA_PCTRL = 0xF14;
++
++	return 0;
++}
++
++/** \fn u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief  A fix to align mis-aligned address for Danube version 1.3 chips
++ *          which has memory alignment issues.
++ *  \param arg Pointer to the input / output memory address
++ *  \param buffer_alloc A pointer to the buffer
++ *  \param in_buff Input (if == 1) or Output (if == 0) buffer
++ *  \param nbytes Number of bytes of data
++ *  \return returns arg: if address is aligned, buffer_alloc: if memory address is not aligned
++*/
++static u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
++{
++	if (danube_pre_1_4) {
++		/* for input buffer */
++		if (in_buff) {
++			if (((u32) arg) & 0xF) {
++				memcpy(buffer_alloc, arg, nbytes);
++				return (u32 *) buffer_alloc;
++			} else {
++				return (u32 *) arg;
++			}
++		}
++		else {
++			/* for output buffer */
++			if (((u32) arg) & 0x3)
++				return buffer_alloc;
++			else
++				return (u32 *) arg;
++		}
++	}
++
++	return (u32 *) arg;
++}
++
++/** \fn  void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief copy the DMA data to the memory address space for AES. The swaping
++ *         of the 4 bytes is done only for Danube version 1.3 (FIX). Otherwise,
++ *         it is a direct memory copy to out_arg pointer
++ *  \param outcopy Pointer to the address to store swapped copy
++ *  \param out_dma A pointer to the memory address that stores the DMA data
++ *  \param out_arg The pointer to the memory address that needs to be copied to
++ *  \param nbytes Number of bytes of data
++*/
++static void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++{
++	int i = 0;
++	int x = 0;
++
++	/* DANUBE PRE 1.4 SOFTWARE FIX */
++	if (danube_pre_1_4) {
++		for (i = 0; i < (nbytes / 4); i++) {
++			x = i ^ 0x3;
++			outcopy[i] = out_dma[x];
++
++		}
++		if (((u32) out_arg) & 0x3) {
++			memcpy((u8 *)out_arg, outcopy, nbytes);
++		}
++	} else {
++		memcpy(out_arg, out_dma, nbytes);
++	}
++}
++
++/** \fn void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief copy the DMA data to the memory address space for DES. The swaping
++ *         of the 4 bytes is done only for Danube version 1.3 (FIX). Otherwise,
++ *         it is a direct memory copy to out_arg pointer
++ *  \param outcopy Pointer to the address to store swapped copy
++ *  \param out_dma A pointer to the memory address that stores the DMA data
++ *  \param out_arg The pointer to the memory address that needs to be copied to
++ *  \param nbytes Number of bytes of data
++*/
++static void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
++{
++	int i = 0;
++	int x = 0;
++
++	/* DANUBE PRE 1.4 SOFTWARE FIX */
++	if (danube_pre_1_4) {
++		for (i = 0; i < (nbytes / 4); i++) {
++			x = i ^ 1;
++			outcopy[i] = out_dma[x];
++
++		}
++		if (((u32) out_arg) & 0x3) {
++			memcpy((u8 *)out_arg, outcopy, nbytes);
++		}
++	} else {
++		memcpy(out_arg, out_dma, nbytes);
++	}
++}
++
++/** \fn int des_dma_malloc(int value)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief allocates memory to the necessary memory input/output buffer
++ *         location, used during the DES algorithm DMA transfer (memory
++ *         alignment issues)
++ *  \param  value value determinds whether the calling of the function is for a
++ *          input buffer or for an output buffer memory allocation
++*/
++static int des_dma_malloc(int value)
++{
++	if (danube_pre_1_4) {
++		if (value == BUFFER_IN) {
++			des_buff_in = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
++			if (!des_buff_in)
++				return -1;
++			else
++				return 0;
++		}
++		else {
++			des_buff_out = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
++			if (!des_buff_out)
++				return -1;
++			else
++				return 0;
++		}
++	} else {
++		return 0;
++	}
++}
++
++/** \fn int aes_dma_malloc(int value)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief allocates memory to the necessary memory input/output buffer
++ *         location, used during the AES algorithm DMA transfer (memory
++ *         alignment issues)
++ *  \param value value determinds whether the calling of the function is for a
++ *         input buffer or for an output buffer memory allocation
++*/
++static int aes_dma_malloc(int value)
++{
++	if (danube_pre_1_4) {
++		if (value == BUFFER_IN) {
++			aes_buff_in = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
++			if (!aes_buff_in)
++				return -1;
++			else
++				return 0;
++		}
++		else {
++			aes_buff_out = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
++			if (!aes_buff_out)
++				return -1;
++			else
++				return 0;
++		}
++	} else {
++		return 0;
++	}
++}
++
++/** \fn void dma_free(u32 *addr)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief frees previously allocated memory
++ *  \param addr memory address of the buffer that needs to be freed
++*/
++static void dma_free(u32 *addr)
++{
++	if (addr)
++		kfree(addr);
++	return;
++}
++
++/** \fn dma_exit(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief unregister dma devices after exit
++*/
++static void dma_exit(void)
++{
++	if (g_dma_page_ptr)
++		free_page((u32) g_dma_page_ptr);
++	dma_device_release(lq_deu[0].dma_device);
++	dma_device_unregister(lq_deu[0].dma_device);
++}
++#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA */
++
++/** \fn u32 endian_swap(u32 input)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief function is not used
++ *  \param input Data input to be swapped
++ *  \return input
++*/
++static u32 endian_swap(u32 input)
++{
++	return input;
++}
++
++/** \fn u32 input_swap(u32 input)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief Swap the input data if the current chip is Danube version
++ *         1.4 and do nothing to the data if the current chip is
++ *         Danube version 1.3
++ *  \param input data that needs to be swapped
++ *  \return input or swapped input
++*/
++static u32 input_swap(u32 input)
++{
++	if (!danube_pre_1_4) {
++		u8 *ptr = (u8 *)&input;
++		return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
++	} else {
++		return input;
++	}
++}
++
++/** \fn void aes_chip_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ * \brief initialize AES hardware
++*/
++static void aes_chip_init(void)
++{
++	volatile struct deu_aes *aes = (struct deu_aes *) AES_START;
++
++#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	/* start crypto engine with write to ILR */
++	aes->ctrl.SM = 1;
++	aes->ctrl.ARS = 1;
++#else
++	aes->ctrl.SM = 1;
++	aes->ctrl.ARS = 1; /* 0 for dma */
++#endif
++}
++
++/** \fn void des_chip_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief initialize DES hardware
++*/
++static void des_chip_init(void)
++{
++	volatile struct deu_des *des = (struct deu_des *) DES_3DES_START;
++
++#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	/* start crypto engine with write to ILR */
++	des->ctrl.SM = 1;
++	des->ctrl.ARS = 1;
++#else
++	des->ctrl.SM = 1;
++	des->ctrl.ARS = 1; /* 0 for dma */
++#endif
++}
++
++/** \fn void deu_chip_version(void)
++ *  \ingroup LQ_DES_FUNCTIONS
++ *  \brief To find the version of the chip by looking at the chip ID
++ *  \param danube_pre_1_4 (sets to 1 if Chip is Danube less than v1.4)
++*/
++static void deu_chip_version(void)
++{
++	/* DANUBE PRE 1.4 SOFTWARE FIX */
++	int chip_id = 0;
++	chip_id = *LQ_MPS_CHIPID;
++	chip_id >>= 28;
++
++	if (chip_id >= 4) {
++		danube_pre_1_4 = 0;
++		printk("Danube Chip ver. 1.4 detected. \n");
++	}
++	else {
++		danube_pre_1_4 = 1;
++		printk("Danube Chip ver. 1.3 or below detected. \n");
++	}
++}
++
++static u32 chip_init(void)
++{
++	volatile struct deu_clk_ctrl *clc = (struct deu_clk_ctrl *) LQ_DEU_CLK;
++
++#if 0
++	lq_pmu_enable(1<<20);
++#endif
++
++	deu_chip_version();
++
++	clc->FSOE = 0;
++	clc->SBWE = 0;
++	clc->SPEN = 0;
++	clc->SBWE = 0;
++	clc->DISS = 0;
++	clc->DISR = 0;
++
++	return *LQ_DEU_ID;
++}
++
++static int lq_crypto_probe(struct platform_device *pdev)
++{
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	lq_crypto_ops.dma_init = dma_init;
++	lq_crypto_ops.dma_exit = dma_exit;
++	lq_crypto_ops.aes_dma_memcpy = aes_dma_memcpy;
++	lq_crypto_ops.des_dma_memcpy = des_dma_memcpy;
++	lq_crypto_ops.aes_dma_malloc = aes_dma_malloc;
++	lq_crypto_ops.des_dma_malloc = des_dma_malloc;
++	lq_crypto_ops.dma_align = dma_align;
++	lq_crypto_ops.dma_free = dma_free;
++#endif
++
++	lq_crypto_ops.endian_swap = endian_swap;
++	lq_crypto_ops.input_swap = input_swap;
++	lq_crypto_ops.aes_chip_init = aes_chip_init;
++	lq_crypto_ops.des_chip_init = des_chip_init;
++	lq_crypto_ops.chip_init = chip_init;
++
++	printk("lq_danube_deu: driver loaded!\n");
++
++	lq_deu_init();
++
++	return 0;
++}
++
++static int lq_crypto_remove(struct platform_device *pdev)
++{
++	lq_deu_exit();
++
++	return 0;
++}
++
++static struct platform_driver lq_crypto = {
++	.probe	= lq_crypto_probe,
++	.remove	= lq_crypto_remove,
++	.driver	= {
++		.owner	= THIS_MODULE,
++		.name	= "lq_danube_deu"
++	}
++};
++
++static int __init lq_crypto_init(void)
++{
++	return platform_driver_register(&lq_crypto);
++}
++module_init(lq_crypto_init);
++
++static void __exit lq_crypto_exit(void)
++{
++	platform_driver_unregister(&lq_crypto);
++}
++module_exit(lq_crypto_exit);
++
++#endif
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_danube.h
+@@ -0,0 +1,255 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus / Infineon Technologies
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief DEU driver module
++*/
++
++/**
++  \file deu_danube.h
++  \brief board specific driver header file for danube
++*/
++
++/**
++  \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
++  \ingroup LQ_DEU
++  \brief board specific DEU header files
++*/
++
++#ifndef DEU_DANUBE_H
++#define DEU_DANUBE_H
++
++#define LQ_DEU_BASE_ADDR       (KSEG1 | 0x1E103100)
++#define LQ_DEU_CLK             ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0000))
++#define LQ_DEU_ID              ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0008))
++#define LQ_DES_CON             ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0010))
++#define LQ_AES_CON             ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0050))
++#define LQ_HASH_CON            ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x00B0))
++#define LQ_ARC4_CON            ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0100))
++
++#define ARC4_START		LQ_ARC4_CON
++#define DES_3DES_START		LQ_DES_CON
++#define HASH_START		LQ_HASH_CON
++#define AES_START		LQ_AES_CON
++
++#define LQ_MPS                                 (KSEG1 | 0x1F107000)
++#define LQ_MPS_CHIPID                          ((volatile u32*)(LQ_MPS + 0x0344))
++#define LQ_MPS_CHIPID_VERSION_GET(value)       (((value) >> 28) & 0xF)
++#define LQ_MPS_CHIPID_VERSION_SET(value)       (((value) & 0xF) << 28)
++#define LQ_MPS_CHIPID_PARTNUM_GET(value)       (((value) >> 12) & 0xFFFF)
++#define LQ_MPS_CHIPID_PARTNUM_SET(value)       (((value) & 0xFFFF) << 12)
++#define LQ_MPS_CHIPID_MANID_GET(value)         (((value) >> 1) & 0x7FF)
++#define LQ_MPS_CHIPID_MANID_SET(value)         (((value) & 0x7FF) << 1)
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++#	define DEU_DWORD_REORDERING(ptr, buffer, in_out, bytes) \
++		deu_dma_align(ptr, buffer, in_out, bytes)
++#	define AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
++		deu_aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
++#	define DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
++		deu_des_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
++#	define BUFFER_IN			1
++#	define BUFFER_OUT			0
++#	define DELAY_PERIOD			9
++#	define AES_ALGO				1
++#	define DES_ALGO				0
++#	define FREE_MEMORY(buff)		deu_dma_free(buff)
++#	define ALLOCATE_MEMORY(val, type)	type ? \
++						deu_aes_dma_malloc(val) : \
++						deu_des_dma_malloc(val)
++#endif /* CONFIG_CRYPTO_DEV_DMA */
++
++#define INPUT_ENDIAN_SWAP(input)		deu_input_swap(input)
++#define DEU_ENDIAN_SWAP(input)			deu_endian_swap(input)
++#define AES_DMA_MISC_CONFIG()
++
++#define WAIT_AES_DMA_READY() \
++	do { \
++		int i; \
++		volatile struct deu_dma *dma = \
++			(struct deu_dma *) LQ_DEU_DMA_CON; \
++		volatile struct deu_aes *aes = \
++			(volatile struct deu_aes *) AES_START; \
++		for (i = 0; i < 10; i++) \
++			udelay(DELAY_PERIOD); \
++		while (dma->ctrl.BSY) {}; \
++		while (aes->ctrl.BUS) {}; \
++	} while (0)
++
++#define WAIT_DES_DMA_READY() \
++	do { \
++		int i; \
++		volatile struct deu_dma *dma = \
++			(struct deu_dma *) LQ_DEU_DMA_CON; \
++		volatile struct deu_des *des = \
++			(struct deu_des *) DES_3DES_START; \
++		for (i = 0; i < 10; i++) \
++			udelay(DELAY_PERIOD); \
++		while (dma->ctrl.BSY) {}; \
++		while (des->ctrl.BUS) {}; \
++	} while (0)
++
++#define SHA_HASH_INIT \
++	do { \
++		volatile struct deu_hash *hash = \
++			(struct deu_hash *) HASH_START; \
++		hash->ctrl.SM = 1; \
++		hash->ctrl.ALGO = 0; \
++		hash->ctrl.INIT = 1; \
++	} while(0)
++
++/* DEU STRUCTURES */
++
++struct deu_clk_ctrl {
++	u32 Res:26;
++	u32 FSOE:1;
++	u32 SBWE:1;
++	u32 EDIS:1;
++	u32 SPEN:1;
++	u32 DISS:1;
++	u32 DISR:1;
++};
++
++struct deu_des {
++	struct deu_des_ctrl {
++		u32 KRE:1;
++		u32 reserved1:5;
++		u32 GO:1;
++		u32 STP:1;
++		u32 Res2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 Res3:2;
++		u32 F:3;
++		u32 O:3;
++		u32 BUS:1;
++		u32 DAU:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 E_D:1;
++		u32 M:3;
++	} ctrl;
++
++	u32 IHR;
++	u32 ILR;
++	u32 K1HR;
++	u32 K1LR;
++	u32 K2HR;
++	u32 K2LR;
++	u32 K3HR;
++	u32 K3LR;
++	u32 IVHR;
++	u32 IVLR;
++	u32 OHR;
++	u32 OLR;
++};
++
++struct deu_aes {
++	struct deu_aes_ctrl {
++		u32 KRE:1;
++		u32 reserved1:4;
++		u32 PNK:1;
++		u32 GO:1;
++		u32 STP:1;
++		u32 reserved2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved3:2;
++		u32 F:3;    /* fbs */
++		u32 O:3;    /* om */
++		u32 BUS:1;  /* bsy */
++		u32 DAU:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 E_D:1;
++		u32 KV:1;
++		u32 K:2;    /* KL */
++	} ctrl;
++
++	u32 ID3R;       /* 80h */
++	u32 ID2R;       /* 84h */
++	u32 ID1R;       /* 88h */
++	u32 ID0R;       /* 8Ch */
++	u32 K7R;        /* 90h */
++	u32 K6R;        /* 94h */
++	u32 K5R;        /* 98h */
++	u32 K4R;        /* 9Ch */
++	u32 K3R;        /* A0h */
++	u32 K2R;        /* A4h */
++	u32 K1R;        /* A8h */
++	u32 K0R;        /* ACh */
++	u32 IV3R;       /* B0h */
++	u32 IV2R;       /* B4h */
++	u32 IV1R;       /* B8h */
++	u32 IV0R;       /* BCh */
++	u32 OD3R;       /* D4h */
++	u32 OD2R;       /* D8h */
++	u32 OD1R;       /* DCh */
++	u32 OD0R;       /* E0h */
++};
++
++struct deu_hash {
++	struct deu_hash_ctrl {
++		u32 reserved1:5;
++		u32 KHS:1;
++		u32 GO:1;
++		u32 INIT:1;
++		u32 reserved2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved3:7;
++		u32 DGRY:1;
++		u32 BSY:1;
++		u32 reserved4:1;
++		u32 IRCL:1;
++		u32 SM:1;
++		u32 KYUE:1;
++		u32 HMEN:1;
++		u32 SSEN:1;
++		u32 ALGO:1;
++	} ctrl;
++
++	u32 MR;         /* B4h */
++	u32 D1R;        /* B8h */
++	u32 D2R;        /* BCh */
++	u32 D3R;        /* C0h */
++	u32 D4R;        /* C4h */
++	u32 D5R;        /* C8h */
++	u32 dummy;      /* CCh */
++	u32 KIDX;       /* D0h */
++	u32 KEY;        /* D4h */
++	u32 DBN;        /* D8h */
++};
++
++struct deu_dma {
++	struct deu_dma_ctrl {
++		u32 reserved1:22;
++		u32 BS:2;
++		u32 BSY:1;
++		u32 reserved2:1;
++		u32 ALGO:2;
++		u32 RXCLS:2;
++		u32 reserved3:1;
++		u32 EN:1;
++	} ctrl;
++};
++
++#endif  /* DEU_DANUBE_H */
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_dma.c
+@@ -0,0 +1,147 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup  LQ_API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file deu_dma.c
++  \ingroup LQ_DEU
++  \brief DMA DEU driver file
++*/
++
++/**
++ \defgroup LQ_DMA_FUNCTIONS LQ_DMA_FUNCTIONS
++ \ingroup LQ_DEU
++ \brief DMA DEU driver functions
++*/
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++#include "deu.h"
++#include "deu_dma.h"
++
++/* extern struct deu_drv_priv deu_dma_priv; */
++
++/** \fn int deu_dma_intr_handler(struct dma_device_info *dma_dev, int status)
++ *  \ingroup LQ_DMA_FUNCTIONS
++ *  \brief callback function for DEU DMA interrupt
++ *  \param dma_dev dma device
++ *  \param status not used
++*/
++int deu_dma_intr_handler(struct dma_device_info *dma_dev, int status)
++{
++#if 0
++	int len = 0;
++	while (len <= 20000) { len++; }
++	u8 *buf;
++	int len = 0;
++
++	struct deu_drv_priv *deu_priv = (struct deu_drv_priv *)dma_dev->priv;
++	/* printk("status:%d \n",status); */
++	switch(status) {
++		case RCV_INT:
++			len = dma_device_read(dma_dev, (u8 **)&buf, NULL);
++			if ( len != deu_priv->deu_rx_len) {
++				printk(KERN_ERR "%s packet length %d is not "
++				       "equal to expect %d\n",
++				       __func__, len, deu_priv->deu_rx_len);
++				return -1;
++			}
++			memcpy(deu_priv->deu_rx_buf, buf, deu_priv->deu_rx_len);
++			/* Reset for next usage */
++			deu_priv->deu_rx_buf = NULL;
++			deu_priv->deu_rx_len = 0;
++			DEU_WAKEUP_EVENT(deu_priv->deu_thread_wait, DEU_EVENT,
++					 deu_priv->deu_event_flags);
++			break;
++		case TX_BUF_FULL_INT:
++			/* delay for buffer to be cleared */
++			while (len <= 20000) { len++; }
++			break;
++
++		case TRANSMIT_CPT_INT:
++			break;
++		default:
++			break;
++	}
++#endif
++	return 0;
++}
++
++extern u8 *g_dma_block;
++extern u8 *g_dma_block2;
++
++/** \fn u8 *deu_dma_buffer_alloc(int len, int *byte_offset, void **opt)
++ *  \ingroup LQ_DMA_FUNCTIONS
++ *  \brief callback function for allocating buffers for dma receive descriptors
++ *  \param len not used
++ *  \param byte_offset dma byte offset
++ *  \param *opt not used
++ *
++*/
++u8 *deu_dma_buffer_alloc(int len, int *byte_offset, void **opt)
++{
++	u8 *swap = NULL;
++
++	/* dma-core needs at least 2 blocks of memory */
++	swap = g_dma_block;
++	g_dma_block = g_dma_block2;
++	g_dma_block2 = swap;
++
++	/* dma_cache_wback_inv((unsigned long) g_dma_block,(PAGE_SIZE >> 1)); */
++	*byte_offset = 0;
++
++	return g_dma_block;
++}
++
++/** \fn int deu_dma_buffer_free(u8 * dataptr, void *opt)
++ *  \ingroup LQ_DMA_FUNCTIONS
++ *  \brief callback function for freeing dma transmit descriptors
++ *  \param dataptr data pointer to be freed
++ *  \param opt not used
++*/
++int deu_dma_buffer_free(u8 *dataptr, void *opt)
++{
++#if 0
++	printk("Trying to free memory buffer\n");
++	if (dataptr == NULL && opt == NULL)
++		return 0;
++	else if (opt == NULL) {
++		kfree(dataptr);
++		return 1;
++	}
++	else if (dataptr == NULL) {
++		kfree(opt);
++		return 1;
++	}
++	else {
++		kfree(opt);
++		kfree(dataptr);
++	}
++#endif
++	return 0;
++}
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_dma.h
+@@ -0,0 +1,78 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \addtogroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file deu_dma.h
++  \ingroup LQ_DEU
++  \brief DMA DEU driver header file
++*/
++
++#ifndef DEU_DMA_H
++#define DEU_DMA_H
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mm.h>
++#include <linux/crypto.h>
++#include <asm/scatterlist.h>
++#include <asm/byteorder.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++
++#include <asm/ifx/irq.h>
++#include <asm/ifx/ifx_dma_core.h>
++#ifndef CONFIG_CRYPTO_DEV_POLL_DMA
++#	define CONFIG_CRYPTO_DEV_POLL_DMA
++#endif
++
++/* must match the size of memory block allocated for
++ * g_dma_block and g_dma_block2 */
++#define DEU_MAX_PACKET_SIZE		(PAGE_SIZE >> 1)
++
++struct lq_deu_device {
++	struct dma_device_info *dma_device;
++	u8 *dst;
++	u8 *src;
++	int len;
++	int dst_count;
++	int src_count;
++	int recv_count;
++	int packet_size;
++	int packet_num;
++	wait_queue_t wait;
++};
++
++extern struct lq_deu_device lq_deu[1];
++
++extern int deu_dma_intr_handler(struct dma_device_info *, int);
++extern u8 *deu_dma_buffer_alloc(int, int *, void **);
++extern int deu_dma_buffer_free(u8 *, void *);
++extern void deu_dma_inactivate_poll(struct dma_device_info* dma_dev);
++extern void deu_dma_activate_poll(struct dma_device_info* dma_dev);
++extern struct dma_device_info* deu_dma_reserve(struct dma_device_info**
++					       dma_device);
++extern int deu_dma_release(struct dma_device_info** dma_device);
++
++#endif	/* IFMIPS_DEU_DMA_H */
+--- /dev/null
++++ b/drivers/crypto/lantiq/md5.c
+@@ -0,0 +1,285 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup    LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file md5.c
++  \ingroup LQ_DEU
++  \brief MD5 encryption DEU driver file
++*/
++
++/**
++  \defgroup LQ_MD5_FUNCTIONS LQ_MD5_FUNCTIONS
++  \ingroup LQ_DEU
++  \brief Lantiq DEU MD5 functions
++*/
++
++#include <crypto/internal/hash.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/string.h>
++#include <linux/crypto.h>
++#include <linux/types.h>
++#include <asm/byteorder.h>
++#include "deu.h"
++
++#define MD5_DIGEST_SIZE     16
++#define MD5_HMAC_BLOCK_SIZE 64
++#define MD5_BLOCK_WORDS     16
++#define MD5_HASH_WORDS      4
++
++static spinlock_t cipher_lock;
++
++struct md5_ctx {
++	u32 hash[MD5_HASH_WORDS];
++	u32 block[MD5_BLOCK_WORDS];
++	u64 byte_count;
++};
++
++/** \fn static u32 md5_endian_swap(u32 input)
++ *  \ingroup LQ_MD5_FUNCTIONS
++ *  \brief perform dword level endian swap
++ *  \param input value of dword that requires to be swapped
++*/
++static u32 md5_endian_swap(u32 input)
++{
++	u8 *ptr = (u8 *)&input;
++
++	return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
++}
++
++/** \fn static void md5_transform(u32 *hash, u32 const *in)
++ *  \ingroup LQ_MD5_FUNCTIONS
++ *  \brief main interface to md5 hardware
++ *  \param hash current hash value
++ *  \param in 64-byte block of input
++*/
++static void md5_transform(u32 *hash, u32 const *in)
++{
++	int i;
++	volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
++	ulong flag;
++
++	CRTCL_SECT_START;
++
++	for (i = 0; i < 16; i++) {
++		hashs->MR = md5_endian_swap(in[i]);
++	};
++
++	/* wait for processing */
++	while (hashs->ctrl.BSY) {
++		/* this will not take long */
++	}
++
++	CRTCL_SECT_END;
++}
++
++/** \fn static inline void md5_transform_helper(struct md5_ctx *ctx)
++ *  \ingroup LQ_MD5_FUNCTIONS
++ *  \brief interfacing function for md5_transform()
++ *  \param ctx crypto context
++*/
++static inline void md5_transform_helper(struct md5_ctx *ctx)
++{
++	/* le32_to_cpu_array(ctx->block, sizeof(ctx->block) / sizeof(u32)); */
++	md5_transform(ctx->hash, ctx->block);
++}
++
++/** \fn static void md5_init(struct crypto_tfm *tfm)
++ *  \ingroup LQ_MD5_FUNCTIONS
++ *  \brief initialize md5 hardware
++ *  \param tfm linux crypto algo transform
++*/
++static int md5_init(struct shash_desc *desc)
++{
++	struct md5_ctx *mctx = shash_desc_ctx(desc);
++	volatile struct deu_hash *hash = (struct deu_hash *) HASH_START;
++
++	hash->ctrl.SM = 1;
++	hash->ctrl.ALGO = 1;    /* 1 = md5  0 = sha1 */
++	hash->ctrl.INIT = 1;    /* Initialize the hash operation by writing
++				       a '1' to the INIT bit. */
++
++	mctx->byte_count = 0;
++
++	return 0;
++}
++
++/** \fn static void md5_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
++ *  \ingroup LQ_MD5_FUNCTIONS
++ *  \brief on-the-fly md5 computation
++ *  \param tfm linux crypto algo transform
++ *  \param data input data
++ *  \param len size of input data
++*/
++static int md5_update(struct shash_desc *desc, const u8 *data, unsigned int len)
++{
++	struct md5_ctx *mctx = shash_desc_ctx(desc);
++	const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
++
++	mctx->byte_count += len;
++
++	if (avail > len) {
++		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
++		       data, len);
++		return 0;
++	}
++
++	memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
++	       data, avail);
++
++	md5_transform_helper(mctx);
++	data += avail;
++	len -= avail;
++
++	while (len >= sizeof(mctx->block)) {
++		memcpy(mctx->block, data, sizeof(mctx->block));
++		md5_transform_helper(mctx);
++		data += sizeof(mctx->block);
++		len -= sizeof(mctx->block);
++	}
++
++	memcpy(mctx->block, data, len);
++
++	return 0;
++}
++
++/** \fn static void md5_final(struct crypto_tfm *tfm, u8 *out)
++ *  \ingroup LQ_MD5_FUNCTIONS
++ *  \brief compute final md5 value
++ *  \param tfm linux crypto algo transform
++ *  \param out final md5 output value
++*/
++static int md5_final(struct shash_desc *desc, u8 *out)
++{
++	struct md5_ctx *mctx = shash_desc_ctx(desc);
++	const unsigned int offset = mctx->byte_count & 0x3f;
++	char *p = (char *)mctx->block + offset;
++	int padding = 56 - (offset + 1);
++	volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
++	unsigned long flag;
++
++	*p++ = 0x80;
++	if (padding < 0) {
++		memset(p, 0x00, padding + sizeof (u64));
++		md5_transform_helper(mctx);
++		p = (char *)mctx->block;
++		padding = 56;
++	}
++
++	memset(p, 0, padding);
++	mctx->block[14] = md5_endian_swap(mctx->byte_count << 3);
++	mctx->block[15] = md5_endian_swap(mctx->byte_count >> 29);
++
++#if 0
++	le32_to_cpu_array(mctx->block, (sizeof(mctx->block) -
++					sizeof(u64)) / sizeof(u32));
++#endif
++
++	md5_transform(mctx->hash, mctx->block);
++
++	CRTCL_SECT_START;
++
++	*((u32 *) out + 0) = md5_endian_swap(hashs->D1R);
++	*((u32 *) out + 1) = md5_endian_swap(hashs->D2R);
++	*((u32 *) out + 2) = md5_endian_swap(hashs->D3R);
++	*((u32 *) out + 3) = md5_endian_swap(hashs->D4R);
++
++	CRTCL_SECT_END;
++
++	/* Wipe context */
++	memset(mctx, 0, sizeof(*mctx));
++
++	return 0;
++}
++
++static int md5_export(struct shash_desc *desc, void *out)
++{
++	struct md5_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(out, sctx, sizeof(*sctx));
++	return 0;
++}
++
++static int md5_import(struct shash_desc *desc, const void *in)
++{
++	struct md5_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(sctx, in, sizeof(*sctx));
++	return 0;
++}
++
++/*
++ * \brief MD5 function mappings
++*/
++static struct shash_alg md5_alg  = {
++	.digestsize	= MD5_DIGEST_SIZE,
++	.init		= md5_init,
++	.update		= md5_update,
++	.final		= md5_final,
++	.export		= md5_export,
++	.import		= md5_import,
++	.descsize	= sizeof(struct md5_ctx),
++	.statesize	= sizeof(struct md5_ctx),
++	.base		= {
++		.cra_name		= "md5",
++		.cra_driver_name	= "lq_deu-md5",
++		.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
++		.cra_blocksize		= MD5_HMAC_BLOCK_SIZE,
++		.cra_module		= THIS_MODULE,
++	}
++};
++
++/** \fn int lq_deu_init_md5(void)
++ *  \ingroup LQ_MD5_FUNCTIONS
++ *  \brief initialize md5 driver
++*/
++int lq_deu_init_md5(void)
++{
++	int ret;
++
++	if ((ret = crypto_register_shash(&md5_alg)))
++		goto md5_err;
++
++	CRTCL_SECT_INIT;
++
++	printk(KERN_NOTICE "Lantiq DEU MD5 initialized%s.\n",
++	       disable_deudma ? "" : " (DMA)");
++	return ret;
++
++md5_err:
++	printk(KERN_ERR "Lantiq DEU MD5 initialization failed!\n");
++	return ret;
++}
++
++/** \fn void lq_deu_fini_md5(void)
++  * \ingroup LQ_MD5_FUNCTIONS
++  * \brief unregister md5 driver
++*/
++
++void lq_deu_fini_md5(void)
++{
++	crypto_unregister_shash(&md5_alg);
++}
++
+--- /dev/null
++++ b/drivers/crypto/lantiq/md5_hmac.c
+@@ -0,0 +1,329 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief  Lantiq DEU driver module
++*/
++
++/**
++  \file md5_hmac.c
++  \ingroup LQ_DEU
++  \brief MD5-HMAC encryption DEU driver file
++*/
++
++/**
++ \defgroup LQ_MD5_HMAC_FUNCTIONS LQ_MD5_HMAC_FUNCTIONS
++ \ingroup LQ_DEU
++ \brief Lantiq md5-hmac driver functions
++*/
++
++#include <crypto/internal/hash.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/string.h>
++#include <linux/crypto.h>
++#include <linux/types.h>
++#include <asm/byteorder.h>
++#include "deu.h"
++
++#define MD5_DIGEST_SIZE     16
++#define MD5_HMAC_BLOCK_SIZE 64
++#define MD5_BLOCK_WORDS     16
++#define MD5_HASH_WORDS      4
++#define MD5_HMAC_DBN_TEMP_SIZE  1024 /* size in dword,
++					needed for dbn workaround */
++
++static spinlock_t cipher_lock;
++
++struct md5_hmac_ctx {
++	u32 hash[MD5_HASH_WORDS];
++	u32 block[MD5_BLOCK_WORDS];
++	u64 byte_count;
++	u32 dbn;
++	u32 temp[MD5_HMAC_DBN_TEMP_SIZE];
++};
++
++/** \fn static u32 md5_endian_swap(u32 input)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief perform dword level endian swap
++ *  \param input value of dword that requires to be swapped
++*/
++static u32 md5_endian_swap(u32 input)
++{
++	u8 *ptr = (u8 *)&input;
++
++	return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
++}
++
++/** \fn static void md5_hmac_transform(struct crypto_tfm *tfm, u32 const *in)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief save input block to context
++ *  \param tfm linux crypto algo transform
++ *  \param in 64-byte block of input
++*/
++static void md5_hmac_transform(struct shash_desc *desc, u32 const *in)
++{
++	struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
++
++	memcpy(&mctx->temp[mctx->dbn<<4], in, 64); /* dbn workaround */
++	mctx->dbn += 1;
++
++	if ( (mctx->dbn<<4) > MD5_HMAC_DBN_TEMP_SIZE )
++	{
++		printk("MD5_HMAC_DBN_TEMP_SIZE exceeded\n");
++	}
++}
++
++/** \fn int md5_hmac_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief sets md5 hmac key
++ *  \param tfm linux crypto algo transform
++ *  \param key input key
++ *  \param keylen key length greater than 64 bytes IS NOT SUPPORTED
++*/
++static int md5_hmac_setkey(struct crypto_shash *tfm,
++			   const u8 *key,
++			   unsigned int keylen)
++{
++	volatile struct deu_hash *hash = (struct deu_hash *) HASH_START;
++	int i, j;
++	u32 *in_key = (u32 *)key;
++
++	hash->KIDX = 0x80000000; /* reset all 16 words of the key to '0' */
++	asm("sync");
++
++	j = 0;
++	for (i = 0; i < keylen; i+=4)
++	{
++		hash->KIDX = j;
++		asm("sync");
++		hash->KEY = *((u32 *) in_key + j);
++		j++;
++	}
++
++	return 0;
++}
++
++/** \fn void md5_hmac_init(struct crypto_tfm *tfm)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief initialize md5 hmac context
++ *  \param tfm linux crypto algo transform
++*/
++static int md5_hmac_init(struct shash_desc *desc)
++{
++	struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
++
++	memset(mctx, 0, sizeof(struct md5_hmac_ctx));
++	mctx->dbn = 0; /* dbn workaround */
++	return 0;
++}
++
++/** \fn void md5_hmac_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief on-the-fly md5 hmac computation
++ *  \param tfm linux crypto algo transform
++ *  \param data input data
++ *  \param len size of input data
++*/
++static int md5_hmac_update(struct shash_desc *desc,
++			   const u8 *data,
++			   unsigned int len)
++{
++	struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
++	const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
++
++	mctx->byte_count += len;
++
++	if (avail > len) {
++		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
++		       data, len);
++		return 0;
++	}
++
++	memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
++	       data, avail);
++
++	md5_hmac_transform(desc, mctx->block);
++	data += avail;
++	len -= avail;
++
++	while (len >= sizeof(mctx->block)) {
++		memcpy(mctx->block, data, sizeof(mctx->block));
++		md5_hmac_transform(desc, mctx->block);
++		data += sizeof(mctx->block);
++		len -= sizeof(mctx->block);
++	}
++
++	memcpy(mctx->block, data, len);
++
++	return 0;
++}
++
++/** \fn void md5_hmac_final(struct crypto_tfm *tfm, u8 *out)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief compute final md5 hmac value
++ *  \param tfm linux crypto algo transform
++ *  \param out final md5 hmac output value
++*/
++static int md5_hmac_final(struct shash_desc *desc, u8 *out)
++{
++	struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
++	const unsigned int offset = mctx->byte_count & 0x3f;
++	char *p = (char *)mctx->block + offset;
++	int padding = 56 - (offset + 1);
++	volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
++	u32 flag;
++	int i = 0;
++	int dbn;
++	u32 *in = &mctx->temp[0];
++
++	*p++ = 0x80;
++	if (padding < 0) {
++		memset(p, 0x00, padding + sizeof (u64));
++		md5_hmac_transform(desc, mctx->block);
++		p = (char *)mctx->block;
++		padding = 56;
++	}
++
++	memset(p, 0, padding);
++	/* need to add 512 bit of the IPAD operation */
++	mctx->block[14] = md5_endian_swap((mctx->byte_count + 64) << 3);
++	mctx->block[15] = 0x00000000;
++
++	md5_hmac_transform(desc, mctx->block);
++
++	CRTCL_SECT_START;
++
++	printk("dbn = %d\n", mctx->dbn);
++	hashs->DBN = mctx->dbn;
++
++	/* khs, go, init, ndc, endi, kyue, hmen, md5 */
++	*LQ_HASH_CON = 0x0703002D;
++
++	/* wait for processing */
++	while (hashs->ctrl.BSY) {
++		/* this will not take long */
++	}
++
++	for (dbn = 0; dbn < mctx->dbn; dbn++)
++	{
++		for (i = 0; i < 16; i++) {
++			hashs->MR = in[i];
++		};
++
++		hashs->ctrl.GO = 1;
++		asm("sync");
++
++		/* wait for processing */
++		while (hashs->ctrl.BSY) {
++			/* this will not take long */
++		}
++
++		in += 16;
++	}
++
++#if 1
++	/* wait for digest ready */
++	while (! hashs->ctrl.DGRY) {
++		/* this will not take long */
++	}
++#endif
++
++	*((u32 *) out + 0) = hashs->D1R;
++	*((u32 *) out + 1) = hashs->D2R;
++	*((u32 *) out + 2) = hashs->D3R;
++	*((u32 *) out + 3) = hashs->D4R;
++	*((u32 *) out + 4) = hashs->D5R;
++
++	CRTCL_SECT_END;
++
++	return 0;
++}
++
++static int md5_hmac_export(struct shash_desc *desc, void *out)
++{
++	struct md5_hmac_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(out, sctx, sizeof(*sctx));
++	return 0;
++}
++
++static int md5_hmac_import(struct shash_desc *desc, const void *in)
++{
++	struct md5_hmac_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(sctx, in, sizeof(*sctx));
++	return 0;
++}
++
++/*
++ * \brief MD5_HMAC function mappings
++*/
++static struct shash_alg md5_hmac_alg  = {
++	.digestsize	= MD5_DIGEST_SIZE,
++	.init		= md5_hmac_init,
++	.update		= md5_hmac_update,
++	.final		= md5_hmac_final,
++	.setkey		= md5_hmac_setkey,
++	.export		= md5_hmac_export,
++	.import		= md5_hmac_import,
++	.descsize	= sizeof(struct md5_hmac_ctx),
++	.statesize	= sizeof(struct md5_hmac_ctx),
++	.base		= {
++		.cra_name		= "hmac(md5)",
++		.cra_driver_name	= "lq_deu-md5_hmac",
++		.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
++		.cra_blocksize		= MD5_HMAC_BLOCK_SIZE,
++		.cra_module		= THIS_MODULE,
++	}
++};
++
++/** \fn int lq_deu_init_md5_hmac(void)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief initialize md5 hmac driver
++*/
++int lq_deu_init_md5_hmac(void)
++{
++	int ret;
++
++	if ((ret = crypto_register_shash(&md5_hmac_alg)))
++		goto md5_hmac_err;
++
++	CRTCL_SECT_INIT;
++
++	printk(KERN_NOTICE "Lantiq DEU MD5_HMAC initialized%s.\n",
++	       disable_deudma ? "" : " (DMA)");
++	return ret;
++
++md5_hmac_err:
++	printk(KERN_ERR "Lantiq DEU MD5_HMAC initialization failed!\n");
++	return ret;
++}
++
++/** \fn void lq_deu_fini_md5_hmac(void)
++ *  \ingroup LQ_MD5_HMAC_FUNCTIONS
++ *  \brief unregister md5 hmac driver
++*/
++void lq_deu_fini_md5_hmac(void)
++{
++	crypto_unregister_shash(&md5_hmac_alg);
++}
++
+--- /dev/null
++++ b/drivers/crypto/lantiq/sha1.c
+@@ -0,0 +1,262 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file sha1.c
++  \ingroup LQ_DEU
++  \brief SHA1 encryption DEU driver file
++*/
++
++/**
++  \defgroup LQ_SHA1_FUNCTIONS LQ_SHA1_FUNCTIONS
++  \ingroup LQ_DEU
++  \brief Lantiq DEU sha1 functions
++*/
++
++
++#include <crypto/internal/hash.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mm.h>
++#include <linux/crypto.h>
++#include <linux/cryptohash.h>
++#include <crypto/sha.h>
++#include <linux/types.h>
++#include <asm/scatterlist.h>
++#include <asm/byteorder.h>
++#include "deu.h"
++
++#define SHA1_DIGEST_SIZE	20
++#define SHA1_HMAC_BLOCK_SIZE	64
++
++static spinlock_t cipher_lock;
++
++/*
++ * \brief SHA1 private structure
++*/
++struct sha1_ctx {
++	u64 count;
++	u32 state[5];
++	u8 buffer[64];
++};
++
++/** \fn static void sha1_transform(u32 *state, const u32 *in)
++ *  \ingroup LQ_SHA1_FUNCTIONS
++ *  \brief main interface to sha1 hardware
++ *  \param state current state
++ *  \param in 64-byte block of input
++*/
++static void sha1_transform(u32 *state, const u32 *in)
++{
++	int i = 0;
++	volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
++	unsigned long flag;
++
++	CRTCL_SECT_START;
++
++	for (i = 0; i < 16; i++) {
++		hashs->MR = in[i];
++	};
++
++	/* wait for processing */
++	while (hashs->ctrl.BSY) {
++		/* this will not take long */
++	}
++
++	CRTCL_SECT_END;
++}
++
++/** \fn static void sha1_init(struct crypto_tfm *tfm)
++ *  \ingroup LQ_SHA1_FUNCTIONS
++ *  \brief initialize sha1 hardware
++ *  \param tfm linux crypto algo transform
++*/
++static int sha1_init(struct shash_desc *desc)
++{
++	struct sha1_ctx *sctx = shash_desc_ctx(desc);
++
++	SHA_HASH_INIT;
++
++	sctx->count = 0;
++
++	return 0;
++}
++
++/** \fn static void sha1_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
++ *  \ingroup LQ_SHA1_FUNCTIONS
++ *  \brief on-the-fly sha1 computation
++ *  \param tfm linux crypto algo transform
++ *  \param data input data
++ *  \param len size of input data
++*/
++static int sha1_update(struct shash_desc *desc, const u8 *data, unsigned int len)
++{
++	struct sha1_ctx *sctx = shash_desc_ctx(desc);
++	unsigned int i, j;
++
++	j = (sctx->count >> 3) & 0x3f;
++	sctx->count += len << 3;
++
++	if ((j + len) > 63) {
++		memcpy(&sctx->buffer[j], data, (i = 64 - j));
++		sha1_transform(sctx->state, (const u32 *)sctx->buffer);
++		for (; i + 63 < len; i += 64) {
++			sha1_transform(sctx->state, (const u32 *)&data[i]);
++		}
++
++		j = 0;
++	} else {
++		i = 0;
++	}
++
++	memcpy(&sctx->buffer[j], &data[i], len - i);
++
++	return 0;
++}
++
++/** \fn static void sha1_final(struct crypto_tfm *tfm, u8 *out)
++ *  \ingroup LQ_SHA1_FUNCTIONS
++ *  \brief compute final sha1 value
++ *  \param tfm linux crypto algo transform
++ *  \param out final md5 output value
++*/
++static int sha1_final(struct shash_desc *desc, u8 *out)
++{
++	struct sha1_ctx *sctx = shash_desc_ctx(desc);
++	u32 index, padlen;
++	u64 t;
++	u8 bits[8] = { 0, };
++	static const u8 padding[64] = { 0x80, };
++	volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
++	ulong flag;
++
++	t = sctx->count;
++	bits[7] = 0xff & t;
++	t >>= 8;
++	bits[6] = 0xff & t;
++	t >>= 8;
++	bits[5] = 0xff & t;
++	t >>= 8;
++	bits[4] = 0xff & t;
++	t >>= 8;
++	bits[3] = 0xff & t;
++	t >>= 8;
++	bits[2] = 0xff & t;
++	t >>= 8;
++	bits[1] = 0xff & t;
++	t >>= 8;
++	bits[0] = 0xff & t;
++
++	/* Pad out to 56 mod 64 */
++	index = (sctx->count >> 3) & 0x3f;
++	padlen = (index < 56) ? (56 - index) : ((64 + 56) - index);
++	sha1_update(desc, padding, padlen);
++
++	/* Append length */
++	sha1_update(desc, bits, sizeof bits);
++
++	CRTCL_SECT_START;
++
++	*((u32 *) out + 0) = hashs->D1R;
++	*((u32 *) out + 1) = hashs->D2R;
++	*((u32 *) out + 2) = hashs->D3R;
++	*((u32 *) out + 3) = hashs->D4R;
++	*((u32 *) out + 4) = hashs->D5R;
++
++	CRTCL_SECT_END;
++
++	/* Wipe context*/
++	memset(sctx, 0, sizeof *sctx);
++
++	return 0;
++}
++
++static int sha1_export(struct shash_desc *desc, void *out)
++{
++	struct sha1_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(out, sctx, sizeof(*sctx));
++	return 0;
++}
++
++static int sha1_import(struct shash_desc *desc, const void *in)
++{
++	struct sha1_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(sctx, in, sizeof(*sctx));
++	return 0;
++}
++
++/*
++ * \brief SHA1 function mappings
++*/
++static struct shash_alg deu_sha1_alg  = {
++	.digestsize	= SHA1_DIGEST_SIZE,
++	.init		= sha1_init,
++	.update		= sha1_update,
++	.final		= sha1_final,
++	.export		= sha1_export,
++	.import		= sha1_import,
++	.descsize	= sizeof(struct sha1_ctx),
++	.statesize	= sizeof(struct sha1_ctx),
++	.base		= {
++		.cra_name		= "sha1",
++		.cra_driver_name	= "lq_deu-sha1",
++		.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
++		.cra_blocksize		= SHA1_HMAC_BLOCK_SIZE,
++		.cra_module		= THIS_MODULE,
++	}
++};
++
++/** \fn int lq_deu_init_sha1(void)
++ *  \ingroup LQ_SHA1_FUNCTIONS
++ *  \brief initialize sha1 driver
++*/
++int lq_deu_init_sha1(void)
++{
++	int ret;
++
++	if ((ret = crypto_register_shash(&deu_sha1_alg)))
++		goto sha1_err;
++
++	CRTCL_SECT_INIT;
++
++	printk(KERN_NOTICE "Lantiq DEU SHA1 initialized%s.\n",
++	       disable_deudma ? "" : " (DMA)");
++	return ret;
++
++sha1_err:
++	printk(KERN_ERR "Lantiq DEU SHA1 initialization failed!\n");
++	return ret;
++}
++
++/** \fn void lq_deu_fini_sha1(void)
++ *  \ingroup LQ_SHA1_FUNCTIONS
++ *  \brief unregister sha1 driver
++*/
++void lq_deu_fini_sha1(void)
++{
++	crypto_unregister_shash(&deu_sha1_alg);
++}
+--- /dev/null
++++ b/drivers/crypto/lantiq/sha1_hmac.c
+@@ -0,0 +1,325 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file sha1_hmac.c
++  \ingroup LQ_DEU
++  \brief SHA1-HMAC DEU driver file
++*/
++
++/**
++  \defgroup LQ_SHA1_HMAC_FUNCTIONS LQ_SHA1_HMAC_FUNCTIONS
++  \ingroup LQ_DEU
++  \brief Lantiq sha1 hmac functions
++*/
++
++
++#include <crypto/internal/hash.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mm.h>
++#include <linux/crypto.h>
++#include <linux/cryptohash.h>
++#include <linux/types.h>
++#include <asm/scatterlist.h>
++#include <asm/byteorder.h>
++#include <linux/delay.h>
++#include "deu.h"
++
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC
++
++#define SHA1_DIGEST_SIZE    20
++#define SHA1_HMAC_BLOCK_SIZE    64
++/* size in dword, needed for dbn workaround */
++#define SHA1_HMAC_DBN_TEMP_SIZE 1024
++
++static spinlock_t cipher_lock;
++
++struct sha1_hmac_ctx {
++	u64 count;
++	u32 state[5];
++	u8 buffer[64];
++	u32 dbn;
++	u32 temp[SHA1_HMAC_DBN_TEMP_SIZE];
++};
++
++/** \fn static void sha1_hmac_transform(struct crypto_tfm *tfm, u32 const *in)
++ *  \ingroup LQ_SHA1_HMAC_FUNCTIONS
++ *  \brief save input block to context
++ *  \param tfm linux crypto algo transform
++ *  \param in 64-byte block of input
++*/
++static void sha1_hmac_transform(struct shash_desc *desc, u32 const *in)
++{
++	struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(&sctx->temp[sctx->dbn<<4], in, 64); /* dbn workaround */
++	sctx->dbn += 1;
++
++	if ((sctx->dbn<<4) > SHA1_HMAC_DBN_TEMP_SIZE) {
++		printk("SHA1_HMAC_DBN_TEMP_SIZE exceeded\n");
++	}
++}
++
++/** \fn int sha1_hmac_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
++ *  \ingroup LQ_SHA1_HMAC_FUNCTIONS
++ *  \brief sets sha1 hmac key
++ *  \param tfm linux crypto algo transform
++ *  \param key input key
++ *  \param keylen key length greater than 64 bytes IS NOT SUPPORTED
++*/
++static int sha1_hmac_setkey(struct crypto_shash *tfm,
++			    const u8 *key,
++			    unsigned int keylen)
++{
++	volatile struct deu_hash *hash = (struct deu_hash *) HASH_START;
++	int i, j;
++	u32 *in_key = (u32 *)key;
++
++	hash->KIDX = 0x80000000; /* reset all 16 words of the key to '0' */
++	asm("sync");
++
++	j = 0;
++	for (i = 0; i < keylen; i+=4)
++	{
++		hash->KIDX = j;
++		asm("sync");
++		hash->KEY = *((u32 *) in_key + j);
++		j++;
++	}
++
++	return 0;
++}
++
++static int sha1_hmac_export(struct shash_desc *desc, void *out)
++{
++	struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(out, sctx, sizeof(*sctx));
++	return 0;
++}
++
++static int sha1_hmac_import(struct shash_desc *desc, const void *in)
++{
++	struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
++
++	memcpy(sctx, in, sizeof(*sctx));
++	return 0;
++}
++
++/** \fn void sha1_hmac_init(struct crypto_tfm *tfm)
++ *  \ingroup LQ_SHA1_HMAC_FUNCTIONS
++ *  \brief initialize sha1 hmac context
++ *  \param tfm linux crypto algo transform
++*/
++static int sha1_hmac_init(struct shash_desc *desc)
++{
++	struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
++
++	memset(sctx, 0, sizeof(struct sha1_hmac_ctx));
++	sctx->dbn = 0; /* dbn workaround */
++
++	return 0;
++}
++
++/** \fn static void sha1_hmac_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
++ *  \ingroup LQ_SHA1_HMAC_FUNCTIONS
++ *  \brief on-the-fly sha1 hmac computation
++ *  \param tfm linux crypto algo transform
++ *  \param data input data
++ *  \param len size of input data
++*/
++static int sha1_hmac_update(struct shash_desc *desc, const u8 *data,
++			    unsigned int len)
++{
++	struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
++	unsigned int i, j;
++
++	j = (sctx->count >> 3) & 0x3f;
++	sctx->count += len << 3;
++	/* printk("sctx->count = %d\n", (sctx->count >> 3)); */
++
++	if ((j + len) > 63) {
++		memcpy(&sctx->buffer[j], data, (i = 64 - j));
++		sha1_hmac_transform(desc, (const u32 *)sctx->buffer);
++		for (; i + 63 < len; i += 64) {
++			sha1_hmac_transform(desc, (const u32 *)&data[i]);
++		}
++
++		j = 0;
++	} else {
++		i = 0;
++	}
++
++	memcpy(&sctx->buffer[j], &data[i], len - i);
++
++	return 0;
++}
++
++/** \fn static void sha1_hmac_final(struct crypto_tfm *tfm, u8 *out)
++ *  \ingroup LQ_SHA1_HMAC_FUNCTIONS
++ *  \brief ompute final sha1 hmac value
++ *  \param tfm linux crypto algo transform
++ *  \param out final sha1 hmac output value
++*/
++static int sha1_hmac_final(struct shash_desc *desc, u8 *out)
++{
++	struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
++	u32 index, padlen;
++	u64 t;
++	u8 bits[8] = { 0, };
++	static const u8 padding[64] = { 0x80, };
++	volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
++	ulong flag;
++	int i = 0;
++	int dbn;
++	u32 *in = &sctx->temp[0];
++
++	t = sctx->count + 512; /* need to add 512 bit of the IPAD operation */
++	bits[7] = 0xff & t;
++	t >>= 8;
++	bits[6] = 0xff & t;
++	t >>= 8;
++	bits[5] = 0xff & t;
++	t >>= 8;
++	bits[4] = 0xff & t;
++	t >>= 8;
++	bits[3] = 0xff & t;
++	t >>= 8;
++	bits[2] = 0xff & t;
++	t >>= 8;
++	bits[1] = 0xff & t;
++	t >>= 8;
++	bits[0] = 0xff & t;
++
++	/* Pad out to 56 mod 64 */
++	index = (sctx->count >> 3) & 0x3f;
++	padlen = (index < 56) ? (56 - index) : ((64 + 56) - index);
++	sha1_hmac_update(desc, padding, padlen);
++
++	/* Append length */
++	sha1_hmac_update(desc, bits, sizeof bits);
++
++	CRTCL_SECT_START;
++
++	hashs->DBN = sctx->dbn;
++
++	/* for vr9 change, ENDI = 1 */
++	*LQ_HASH_CON = HASH_CON_VALUE;
++
++	/* wait for processing */
++	while (hashs->ctrl.BSY) {
++		/* this will not take long */
++	}
++
++	for (dbn = 0; dbn < sctx->dbn; dbn++)
++	{
++		for (i = 0; i < 16; i++) {
++			hashs->MR = in[i];
++		};
++
++		hashs->ctrl.GO = 1;
++		asm("sync");
++
++		/* wait for processing */
++		while (hashs->ctrl.BSY) {
++			/* this will not take long */
++		}
++
++		in += 16;
++
++		return 0;
++	}
++
++#if 1
++	/* wait for digest ready */
++	while (! hashs->ctrl.DGRY) {
++		/* this will not take long */
++	}
++#endif
++
++	*((u32 *) out + 0) = hashs->D1R;
++	*((u32 *) out + 1) = hashs->D2R;
++	*((u32 *) out + 2) = hashs->D3R;
++	*((u32 *) out + 3) = hashs->D4R;
++	*((u32 *) out + 4) = hashs->D5R;
++
++	CRTCL_SECT_END;
++}
++
++/*
++ * \brief SHA1-HMAC function mappings
++*/
++static struct shash_alg sha1_hmac_alg  = {
++	.digestsize	= SHA1_DIGEST_SIZE,
++	.init		= sha1_hmac_init,
++	.update		= sha1_hmac_update,
++	.final		= sha1_hmac_final,
++	.export		= sha1_hmac_export,
++	.import		= sha1_hmac_import,
++	.setkey		= sha1_hmac_setkey,
++	.descsize	= sizeof(struct sha1_hmac_ctx),
++	.statesize	= sizeof(struct sha1_hmac_ctx),
++	.base		= {
++		.cra_name		= "hmac(sha1)",
++		.cra_driver_name	= "lq_deu-sha1_hmac",
++		.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
++		.cra_blocksize		= SHA1_HMAC_BLOCK_SIZE,
++		.cra_module		= THIS_MODULE,
++	}
++};
++
++/** \fn int lq_deu_init_sha1_hmac(void)
++ *  \ingroup LQ_SHA1_HMAC_FUNCTIONS
++ *  \brief initialize sha1 hmac driver
++*/
++int lq_deu_init_sha1_hmac(void)
++{
++	int ret;
++
++	if ((ret = crypto_register_shash(&sha1_hmac_alg)))
++		goto sha1_err;
++
++	CRTCL_SECT_INIT;
++
++	printk(KERN_NOTICE "Lantiq DEU SHA1_HMAC initialized%s.\n",
++	       disable_deudma ? "" : " (DMA)");
++	return ret;
++
++sha1_err:
++	printk(KERN_ERR "Lantiq DEU SHA1_HMAC initialization failed!\n");
++	return ret;
++}
++
++/** \fn void lq_deu_fini_sha1_hmac(void)
++ *  \ingroup LQ_SHA1_HMAC_FUNCTIONS
++ *  \brief unregister sha1 hmac driver
++*/
++void lq_deu_fini_sha1_hmac(void)
++{
++	crypto_unregister_shash(&sha1_hmac_alg);
++}
++
++#endif
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_falcon.c
+@@ -0,0 +1,163 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <asm/io.h> /* dma_cache_inv */
++#include <linux/platform_device.h>
++
++#ifdef CONFIG_SOC_LANTIQ_FALCON
++
++#include "deu.h"
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief Lantiq DEU driver module
++*/
++
++/**
++  \file deu_falcon.c
++  \brief Lantiq DEU board specific driver file for ar9
++*/
++
++/**
++ \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
++ \ingroup LQ_DEU
++ \brief board specific functions
++*/
++
++#include <falcon/gpon_reg_base.h>
++#include <falcon/sys1_reg.h>
++#include <falcon/status_reg.h>
++#include <falcon/sysctrl.h>
++
++#define reg_r32(reg)			__raw_readl(reg)
++#define reg_w32(val, reg)		__raw_writel(val, reg)
++#define reg_w32_mask(clear, set, reg)	reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
++
++static gpon_sys1_t * const sys1 = (gpon_sys1_t *)GPON_SYS1_BASE;
++static gpon_status_t * const status = (gpon_status_t *)GPON_STATUS_BASE;
++
++/** \fn u32 endian_swap(u32 input)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief Swap data given to the function
++ *  \param input   Data input to be swapped
++ *  \return either the swapped data or the input data depending on whether it is in DMA mode or FPI mode
++*/
++static u32 endian_swap(u32 input)
++{
++	return input;
++}
++
++/** \fn u32 input_swap(u32 input)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief Not used
++ *  \return input
++*/
++static u32 input_swap(u32 input)
++{
++	return input;
++}
++
++/** \fn void aes_chip_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief initialize AES hardware
++*/
++static void aes_chip_init(void)
++{
++	volatile struct deu_aes *aes = (struct deu_aes *) AES_START;
++
++	aes->ctrl.SM = 1;
++	aes->ctrl.ARS = 1;
++}
++
++/** \fn void des_chip_init(void)
++ *  \ingroup BOARD_SPECIFIC_FUNCTIONS
++ *  \brief initialize DES hardware
++*/
++static void des_chip_init(void)
++{
++}
++
++static u32 chip_init(void)
++{
++	sys1_hw_clk_enable(CLKEN_SHA1_SET | CLKEN_AES_SET);
++	sys1_hw_activate(ACT_SHA1_SET | ACT_AES_SET);
++
++	return LQ_DEU_ID_AES | LQ_DEU_ID_HASH;
++}
++
++static int lq_crypto_probe(struct platform_device *pdev)
++{
++#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
++	lq_crypto_ops.dma_init = NULL;
++	lq_crypto_ops.dma_exit = NULL;
++	lq_crypto_ops.aes_dma_memcpy = NULL;
++	lq_crypto_ops.des_dma_memcpy = NULL;
++	lq_crypto_ops.aes_dma_malloc = NULL;
++	lq_crypto_ops.des_dma_malloc = NULL;
++	lq_crypto_ops.dma_align = NULL;
++	lq_crypto_ops.dma_free = NULL;
++#endif
++
++	lq_crypto_ops.endian_swap = endian_swap;
++	lq_crypto_ops.input_swap = input_swap;
++	lq_crypto_ops.aes_chip_init = aes_chip_init;
++	lq_crypto_ops.des_chip_init = des_chip_init;
++	lq_crypto_ops.chip_init = chip_init;
++
++	printk("lq_falcon_deu: driver loaded!\n");
++
++	lq_deu_init();
++
++	return 0;
++}
++
++static int lq_crypto_remove(struct platform_device *pdev)
++{
++	lq_deu_exit();
++
++	return 0;
++}
++
++static struct platform_driver lq_crypto = {
++	.probe	= lq_crypto_probe,
++	.remove	= lq_crypto_remove,
++	.driver	= {
++		.owner	= THIS_MODULE,
++		.name	= "lq_falcon_deu"
++	}
++};
++
++static int __init lq_crypto_init(void)
++{
++	return platform_driver_register(&lq_crypto);
++}
++module_init(lq_crypto_init);
++
++static void __exit lq_crypto_exit(void)
++{
++	platform_driver_unregister(&lq_crypto);
++}
++module_exit(lq_crypto_exit);
++
++#endif
+--- /dev/null
++++ b/drivers/crypto/lantiq/deu_falcon.h
+@@ -0,0 +1,281 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
++ *   Copyright (C) 2009 Mohammad Firdaus / Infineon Technologies
++ */
++
++/**
++  \defgroup LQ_DEU LQ_DEU_DRIVERS
++  \ingroup API
++  \brief DEU driver module
++*/
++
++/**
++  \defgroup LQ_DEU_DEFINITIONS LQ_DEU_DEFINITIONS
++  \ingroup LQ_DEU
++  \brief Lantiq DEU definitions
++*/
++
++/**
++  \file deu_falcon.h
++  \brief DEU driver header file
++*/
++
++
++#ifndef DEU_FALCON_H
++#define DEU_FALCON_H
++
++#define HASH_START			0xbd008100
++#define AES_START			0xbd008000
++
++#ifdef CONFIG_CRYPTO_DEV_DMA
++#	include "deu_dma.h"
++#	define DEU_DWORD_REORDERING(ptr, buffer, in_out, bytes) \
++		deu_dma_align(ptr, buffer, in_out, bytes)
++#	define AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
++		deu_aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
++#	define DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
++		deu_des_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
++#	define BUFFER_IN			1
++#	define BUFFER_OUT			0
++#	define AES_ALGO				1
++#	define DES_ALGO				0
++#	define ALLOCATE_MEMORY(val, type)	1
++#	define FREE_MEMORY(buff)
++extern struct lq_deu_device lq_deu[1];
++#endif /* CONFIG_CRYPTO_DEV_DMA */
++
++/* SHA CONSTANTS */
++#define HASH_CON_VALUE				0x0700002C
++
++#define INPUT_ENDIAN_SWAP(input)		deu_input_swap(input)
++#define DEU_ENDIAN_SWAP(input)			deu_endian_swap(input)
++#define DELAY_PERIOD				10
++#define FIND_DEU_CHIP_VERSION			chip_version()
++
++#define WAIT_AES_DMA_READY() \
++	do { \
++		int i; \
++		volatile struct deu_dma *dma = \
++			(struct deu_dma *) LQ_DEU_DMA_CON; \
++		volatile struct deu_aes *aes = \
++			(volatile struct deu_aes *) AES_START; \
++		for (i = 0; i < 10; i++) \
++			udelay(DELAY_PERIOD); \
++		while (dma->ctrl.BSY) {}; \
++		while (aes->ctrl.BUS) {}; \
++	} while (0)
++
++#define WAIT_DES_DMA_READY() \
++	do { \
++		int i; \
++		volatile struct deu_dma *dma = \
++			(struct deu_dma *) LQ_DEU_DMA_CON; \
++		volatile struct deu_des *des = \
++			(struct deu_des *) DES_3DES_START; \
++		for (i = 0; i < 10; i++) \
++			udelay(DELAY_PERIOD); \
++		while (dma->ctrl.BSY) {}; \
++		while (des->ctrl.BUS) {}; \
++	} while (0)
++
++#define AES_DMA_MISC_CONFIG() \
++	do { \
++		volatile struct deu_aes *aes = \
++			(volatile struct deu_aes *) AES_START; \
++		aes->ctrl.KRE = 1; \
++		aes->ctrl.GO = 1; \
++	} while(0)
++
++#define SHA_HASH_INIT \
++	do { \
++		volatile struct deu_hash *hash = \
++			(struct deu_hash *) HASH_START; \
++		hash->ctrl.SM = 1; \
++		hash->ctrl.ALGO = 0; \
++		hash->ctrl.INIT = 1; \
++	} while(0)
++
++/* DEU Common Structures for Falcon*/
++
++struct deu_clk_ctrl {
++	u32 Res:26;
++	u32 FSOE:1;
++	u32 SBWE:1;
++	u32 EDIS:1;
++	u32 SPEN:1;
++	u32 DISS:1;
++	u32 DISR:1;
++};
++
++struct deu_des {
++	struct deu_des_ctrl {	/* 10h */
++		u32 KRE:1;
++		u32 reserved1:5;
++		u32 GO:1;
++		u32 STP:1;
++		u32 Res2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 Res3:2;
++		u32 F:3;
++		u32 O:3;
++		u32 BUS:1;
++		u32 DAU:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 E_D:1;
++		u32 M:3;
++	} ctrl;
++
++	u32 IHR;		/* 14h */
++	u32 ILR;		/* 18h */
++	u32 K1HR;		/* 1c */
++	u32 K1LR;
++	u32 K2HR;
++	u32 K2LR;
++	u32 K3HR;
++	u32 K3LR;		/* 30h */
++	u32 IVHR;		/* 34h */
++	u32 IVLR;		/* 38 */
++	u32 OHR;		/* 3c */
++	u32 OLR;		/* 40 */
++};
++
++struct deu_aes {
++	struct deu_aes_ctrl {
++		u32 KRE:1;
++		u32 reserved1:4;
++		u32 PNK:1;
++		u32 GO:1;
++		u32 STP:1;
++		u32 reserved2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved3:2;
++		u32 F:3;	/* fbs */
++		u32 O:3;	/* om */
++		u32 BUS:1;	/* bsy */
++		u32 DAU:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 E_D:1;
++		u32 KV:1;
++		u32 K:2;	/* KL */
++	} ctrl;
++
++	u32 ID3R;		/* 80h */
++	u32 ID2R;		/* 84h */
++	u32 ID1R;		/* 88h */
++	u32 ID0R;		/* 8Ch */
++	u32 K7R;		/* 90h */
++	u32 K6R;		/* 94h */
++	u32 K5R;		/* 98h */
++	u32 K4R;		/* 9Ch */
++	u32 K3R;		/* A0h */
++	u32 K2R;		/* A4h */
++	u32 K1R;		/* A8h */
++	u32 K0R;		/* ACh */
++	u32 IV3R;		/* B0h */
++	u32 IV2R;		/* B4h */
++	u32 IV1R;		/* B8h */
++	u32 IV0R;		/* BCh */
++	u32 OD3R;		/* D4h */
++	u32 OD2R;		/* D8h */
++	u32 OD1R;		/* DCh */
++	u32 OD0R;		/* E0h */
++};
++
++struct deu_arc4 {
++	struct arc4_controlr {
++		u32 KRE:1;
++		u32 KLEN:4;
++		u32 KSAE:1;
++		u32 GO:1;
++		u32 STP:1;
++		u32 reserved1:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved2:8;
++		u32 BUS:1;	/* bsy */
++		u32 reserved3:1;
++		u32 ARS:1;
++		u32 SM:1;
++		u32 reserved4:4;
++	} ctrl;
++
++	u32 K3R;		/* 104h */
++	u32 K2R;		/* 108h */
++	u32 K1R;		/* 10Ch */
++	u32 K0R;		/* 110h */
++	u32 IDLEN;		/* 114h */
++	u32 ID3R;		/* 118h */
++	u32 ID2R;		/* 11Ch */
++	u32 ID1R;		/* 120h */
++	u32 ID0R;		/* 124h */
++	u32 OD3R;		/* 128h */
++	u32 OD2R;		/* 12Ch */
++	u32 OD1R;		/* 130h */
++	u32 OD0R;		/* 134h */
++};
++
++struct deu_hash {
++	struct deu_hash_ctrl {
++		u32 reserved1:5;
++		u32 KHS:1;
++		u32 GO:1;
++		u32 INIT:1;
++		u32 reserved2:6;
++		u32 NDC:1;
++		u32 ENDI:1;
++		u32 reserved3:7;
++		u32 DGRY:1;
++		u32 BSY:1;
++		u32 reserved4:1;
++		u32 IRCL:1;
++		u32 SM:1;
++		u32 KYUE:1;
++		u32 HMEN:1;
++		u32 SSEN:1;
++		u32 ALGO:1;
++	} ctrl;
++
++	u32 MR;			/* B4h */
++	u32 D1R;		/* B8h */
++	u32 D2R;		/* BCh */
++	u32 D3R;		/* C0h */
++	u32 D4R;		/* C4h */
++	u32 D5R;		/* C8h */
++	u32 dummy;		/* CCh */
++	u32 KIDX;		/* D0h */
++	u32 KEY;		/* D4h */
++	u32 DBN;		/* D8h */
++};
++
++struct deu_dma {
++	struct deu_dma_ctrl {
++		u32 reserved1:22;
++		u32 BS:2;
++		u32 BSY:1;
++		u32 reserved2:1;
++		u32 ALGO:2;
++		u32 RXCLS:2;
++		u32 reserved3:1;
++		u32 EN:1;
++	} ctrl;
++};
++
++#endif /* DEU_FALCON_H */
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -277,3 +277,9 @@
+ 		break;
+ 	}
+ }
++
++void __init
++lq_register_crypto(const char *name)
++{
++	platform_device_register_simple(name, 0, 0, 0);
++}
+--- a/arch/mips/lantiq/xway/devices.h
++++ b/arch/mips/lantiq/xway/devices.h
+@@ -21,5 +21,6 @@
+ extern void __init lq_register_wdt(void);
+ extern void __init lq_register_ethernet(struct lq_eth_data *eth);
+ extern void __init lq_register_asc(int port);
++extern void __init lq_register_crypto(const char *name);
+ 
+ #endif
+--- a/arch/mips/lantiq/xway/mach-easy50712.c
++++ b/arch/mips/lantiq/xway/mach-easy50712.c
+@@ -72,6 +72,7 @@
+ 	lq_register_wdt();
+ 	lq_register_pci(&lq_pci_data);
+ 	lq_register_ethernet(&lq_eth_data);
++	lq_register_crypto("lq_danube_deu");
+ }
+ 
+ MIPS_MACHINE(LANTIQ_MACH_EASY50712,
+--- a/arch/mips/lantiq/xway/mach-easy50812.c
++++ b/arch/mips/lantiq/xway/mach-easy50812.c
+@@ -71,6 +71,7 @@
+ 	lq_register_wdt();
+ 	lq_register_pci(&lq_pci_data);
+ 	lq_register_ethernet(&lq_eth_data);
++	lq_register_crypto("lq_ar9_deu");
+ }
+ 
+ MIPS_MACHINE(LANTIQ_MACH_EASY50812,
diff --git a/target/linux/lantiq/patches/300-udp_redirect.patch b/target/linux/lantiq/patches/300-udp_redirect.patch
new file mode 100644
index 0000000000..7425a3108f
--- /dev/null
+++ b/target/linux/lantiq/patches/300-udp_redirect.patch
@@ -0,0 +1,346 @@
+--- /dev/null
++++ b/include/linux/udp_redirect.h
+@@ -0,0 +1,57 @@
++#ifndef _UDP_REDIRECT_H
++#define _UDP_REDIRECT_H
++
++/******************************************************************************
++
++                               Copyright (c) 2006
++                            Infineon Technologies AG
++                     Am Campeon 1-12; 81726 Munich, Germany
++
++  THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
++  WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
++  SOFTWARE IS FREE OF CHARGE.
++
++  THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
++  ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
++  WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
++  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
++  OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
++  PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
++  PROPERTY INFRINGEMENT.
++
++  EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
++  FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
++  OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
++  ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++  DEALINGS IN THE SOFTWARE.
++
++******************************************************************************/
++
++/* ============================= */
++/* Includes                      */
++/* ============================= */
++#ifndef _LINUX_TYPES_H
++#include <linux/types.h>
++#endif
++
++
++/* ============================= */
++/* Definitions                   */
++/* ============================= */
++#define UDP_REDIRECT_MAGIC (void*)0x55445052L
++
++
++/* ============================= */
++/* Global variable declaration   */
++/* ============================= */
++extern int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb);
++extern int (*udpredirect_getfrag_fn)(void *p, char * to,
++                                     int offset, int fraglen, int odd,
++                                     struct sk_buff *skb);
++/* ============================= */
++/* Global function declaration   */
++/* ============================= */
++
++extern int udpredirect_getfrag(void *p, char * to, int offset,
++                               int fraglen, int odd, struct sk_buff *skb);
++#endif
+--- /dev/null
++++ b/net/ipv4/udp_redirect_symb.c
+@@ -0,0 +1,186 @@
++/******************************************************************************
++
++                               Copyright (c) 2006
++                            Infineon Technologies AG
++                     Am Campeon 1-12; 81726 Munich, Germany
++
++  THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
++  WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
++  SOFTWARE IS FREE OF CHARGE.
++
++  THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
++  ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
++  WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
++  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
++  OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
++  PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
++  PROPERTY INFRINGEMENT.
++
++  EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
++  FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
++  OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
++  ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++  DEALINGS IN THE SOFTWARE.
++
++******************************************************************************/
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++/* ============================= */
++/* Includes                      */
++/* ============================= */
++#include <net/checksum.h>
++#include <net/udp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/udp_redirect.h>
++
++/* ============================= */
++/* Global variable definition    */
++/* ============================= */
++int (*udpredirect_getfrag_fn) (void *p, char * to, int offset,
++                               int fraglen, int odd, struct sk_buff *skb) = NULL;
++int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb) = NULL;
++
++/* ============================= */
++/* Local type definitions        */
++/* ============================= */
++struct udpfakehdr
++{
++  struct udphdr uh;
++  u32 saddr;
++  u32 daddr;
++  struct iovec *iov;
++  u32 wcheck;
++};
++
++/* ============================= */
++/* Local function declaration    */
++/* ============================= */
++static int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata,
++              struct iovec *iov, int offset, unsigned int len, __wsum *csump);
++
++static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
++                        int len);
++
++/* ============================= */
++/* Global function definition    */
++/* ============================= */
++
++/*
++   Copy of udp_getfrag() from udp.c
++   This function exists because no copy_from_user() is needed for udpredirect.
++*/
++
++int
++udpredirect_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb)
++{
++   struct iovec *iov = from;
++
++        if (skb->ip_summed == CHECKSUM_PARTIAL) {
++                if (udpredirect_memcpy_fromiovecend(to, iov, offset, len) < 0)
++                        return -EFAULT;
++        } else {
++                __wsum csum = 0;
++                if (udpredirect_csum_partial_copy_fromiovecend(to, iov, offset, len, &csum) < 0)
++                        return -EFAULT;
++                skb->csum = csum_block_add(skb->csum, csum, odd);
++        }
++        return 0;
++}
++
++static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
++                        int len)
++{
++        /* Skip over the finished iovecs */
++        while (offset >= iov->iov_len) {
++                offset -= iov->iov_len;
++                iov++;
++        }
++
++        while (len > 0) {
++                u8 __user *base = iov->iov_base + offset;
++                int copy = min_t(unsigned int, len, iov->iov_len - offset);
++
++                offset = 0;
++                memcpy(kdata, base, copy);
++                len -= copy;
++                kdata += copy;
++                iov++;
++        }
++
++        return 0;
++}
++
++/*
++   Copy of csum_partial_copy_fromiovecend() from iovec.c
++   This function exists because no copy_from_user() is needed for udpredirect.
++*/
++
++int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata, struct iovec *iov,
++				 int offset, unsigned int len, __wsum *csump)
++{
++	__wsum csum = *csump;
++	int partial_cnt = 0, err = 0;
++
++	/* Skip over the finished iovecs */
++	while (offset >= iov->iov_len) {
++		offset -= iov->iov_len;
++		iov++;
++	}
++
++	while (len > 0) {
++		u8 __user *base = iov->iov_base + offset;
++		int copy = min_t(unsigned int, len, iov->iov_len - offset);
++
++		offset = 0;
++
++		/* There is a remnant from previous iov. */
++		if (partial_cnt) {
++			int par_len = 4 - partial_cnt;
++
++			/* iov component is too short ... */
++			if (par_len > copy) {
++				memcpy(kdata, base, copy);
++				kdata += copy;
++				base  += copy;
++				partial_cnt += copy;
++				len   -= copy;
++				iov++;
++				if (len)
++					continue;
++				*csump = csum_partial(kdata - partial_cnt,
++							 partial_cnt, csum);
++				goto out;
++			}
++			memcpy(kdata, base, par_len);
++			csum = csum_partial(kdata - partial_cnt, 4, csum);
++			kdata += par_len;
++			base  += par_len;
++			copy  -= par_len;
++			len   -= par_len;
++			partial_cnt = 0;
++		}
++
++		if (len > copy) {
++			partial_cnt = copy % 4;
++			if (partial_cnt) {
++				copy -= partial_cnt;
++				memcpy(kdata + copy, base + copy, partial_cnt);
++			}
++		}
++
++		if (copy) {
++			csum = csum_partial_copy_nocheck(base, kdata, copy, csum);
++		}
++		len   -= copy + partial_cnt;
++		kdata += copy + partial_cnt;
++		iov++;
++	}
++        *csump = csum;
++out:
++	return err;
++}
++
++EXPORT_SYMBOL(udpredirect_getfrag);
++EXPORT_SYMBOL(udp_do_redirect_fn);
++EXPORT_SYMBOL(udpredirect_getfrag_fn);
++#endif /* CONFIG_IFX_UDP_REDIRECT* */
+--- a/net/ipv4/Makefile
++++ b/net/ipv4/Makefile
+@@ -14,6 +14,9 @@ obj-y     := route.o inetpeer.o protocol
+ 	     inet_fragment.o
+ 
+ obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
++ifneq ($(CONFIG_IFX_UDP_REDIRECT),)
++obj-$(CONFIG_IFX_UDP_REDIRECT) += udp_redirect_symb.o
++endif
+ obj-$(CONFIG_IP_FIB_HASH) += fib_hash.o
+ obj-$(CONFIG_IP_FIB_TRIE) += fib_trie.o
+ obj-$(CONFIG_PROC_FS) += proc.o
+--- a/net/ipv4/udp.c
++++ b/net/ipv4/udp.c
+@@ -106,6 +106,10 @@
+ #include <net/xfrm.h>
+ #include "udp_impl.h"
+ 
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++#include <linux/udp_redirect.h>
++#endif
++
+ struct udp_table udp_table __read_mostly;
+ EXPORT_SYMBOL(udp_table);
+ 
+@@ -782,7 +786,7 @@ int udp_sendmsg(struct kiocb *iocb, stru
+ 	u8  tos;
+ 	int err, is_udplite = IS_UDPLITE(sk);
+ 	int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
+-	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
++	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *) = NULL;
+ 
+ 	if (len > 0xFFFF)
+ 		return -EMSGSIZE;
+@@ -944,6 +948,12 @@ back_from_confirm:
+ 
+ do_append_data:
+ 	up->len += ulen;
++	/* UDPREDIRECT */
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++	if(udpredirect_getfrag_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
++		getfrag = udpredirect_getfrag_fn;
++	else
++#endif /* IFX_UDP_REDIRECT */
+ 	getfrag  =  is_udplite ?  udplite_getfrag : ip_generic_getfrag;
+ 	err = ip_append_data(sk, getfrag, msg->msg_iov, ulen,
+ 			sizeof(struct udphdr), &ipc, &rt,
+@@ -1518,6 +1528,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, 
+ 	struct rtable *rt = skb_rtable(skb);
+ 	__be32 saddr, daddr;
+ 	struct net *net = dev_net(skb->dev);
++	int ret = 0;
+ 
+ 	/*
+ 	 *  Validate the packet.
+@@ -1550,7 +1561,16 @@ int __udp4_lib_rcv(struct sk_buff *skb, 
+ 	sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
+ 
+ 	if (sk != NULL) {
+-		int ret = udp_queue_rcv_skb(sk, skb);
++	/* UDPREDIRECT */
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++      if(udp_do_redirect_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
++      {
++         udp_do_redirect_fn(sk,skb);
++         kfree_skb(skb);
++         return(0);
++      }
++#endif
++		ret = udp_queue_rcv_skb(sk, skb);
+ 		sock_put(sk);
+ 
+ 		/* a return value > 0 means to resubmit the input, but
+@@ -1845,7 +1865,7 @@ struct proto udp_prot = {
+ #endif
+ };
+ EXPORT_SYMBOL(udp_prot);
+-
++EXPORT_SYMBOL(udp_rcv);
+ /* ------------------------------------------------------------------------ */
+ #ifdef CONFIG_PROC_FS
+ 
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -72,6 +72,12 @@ config INET
+ 
+ 	  Short answer: say Y.
+ 
++config IFX_UDP_REDIRECT
++	bool "IFX Kernel Packet Interface for UDP redirection"
++	help
++	  You can say Y here if you want to use hooks from kernel for
++	  UDP redirection.
++
+ if INET
+ source "net/ipv4/Kconfig"
+ source "net/ipv6/Kconfig"
diff --git a/target/linux/lantiq/patches/310-atm_hack.patch b/target/linux/lantiq/patches/310-atm_hack.patch
new file mode 100644
index 0000000000..55e75ce546
--- /dev/null
+++ b/target/linux/lantiq/patches/310-atm_hack.patch
@@ -0,0 +1,42 @@
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -52,6 +52,8 @@
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ 
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_wback);
++EXPORT_SYMBOL(_dma_cache_inv);
+ 
+ #endif /* CONFIG_DMA_NONCOHERENT */
+ 
+--- a/net/atm/proc.c
++++ b/net/atm/proc.c
+@@ -153,7 +153,7 @@
+ static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
+ {
+ 	static const char *const class_name[] = {
+-		"off", "UBR", "CBR", "VBR", "ABR"};
++		"off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
+ 	static const char *const aal_name[] = {
+ 		"---",	"1",	"2",	"3/4",	/*  0- 3 */
+ 		"???",	"5",	"???",	"???",	/*  4- 7 */
+--- a/net/atm/common.c
++++ b/net/atm/common.c
+@@ -60,11 +60,17 @@
+ 	write_unlock_irq(&vcc_sklist_lock);
+ }
+ 
++struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
++EXPORT_SYMBOL(ifx_atm_alloc_tx);
++
+ static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
+ {
+ 	struct sk_buff *skb;
+ 	struct sock *sk = sk_atm(vcc);
+ 
++	if (ifx_atm_alloc_tx != NULL)
++		return ifx_atm_alloc_tx(vcc, size);
++
+ 	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
+ 		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
+ 			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
diff --git a/target/linux/lantiq/patches/400-mach-arv45xx.patch b/target/linux/lantiq/patches/400-mach-arv45xx.patch
new file mode 100644
index 0000000000..643a0f7ae1
--- /dev/null
+++ b/target/linux/lantiq/patches/400-mach-arv45xx.patch
@@ -0,0 +1,211 @@
+--- a/arch/mips/include/asm/mach-lantiq/machine.h
++++ b/arch/mips/include/asm/mach-lantiq/machine.h
+@@ -11,4 +11,7 @@
+ 	LANTIQ_MACH_EASY4010,		/* Twinpass evalkit */
+ 	LANTIQ_MACH_EASY50712,		/* Danube evalkit */
+ 	LANTIQ_MACH_EASY50812,		/* AR9 eval board */
++	LANTIQ_MACH_ARV4518,		/* Airties WAV-221, SMC-7908A-ISP */
++	LANTIQ_MACH_ARV452,			/* Airties WAV-281, Arcor EasyboxA800 */
++	LANTIQ_MACH_ARV4525,		/* Speedport W502V */
+ };
+--- a/arch/mips/lantiq/xway/Kconfig
++++ b/arch/mips/lantiq/xway/Kconfig
+@@ -14,6 +14,10 @@
+ 	bool "Easy4010"
+ 	default y
+ 
++config LANTIQ_MACH_ARV45XX
++	bool "ARV45XX"
++	default y
++
+ endmenu
+ 
+ endif
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -3,3 +3,4 @@
+ obj-$(CONFIG_LANTIQ_MACH_EASY50812) += mach-easy50812.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY4010) += mach-easy4010.o
++obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
+--- /dev/null
++++ b/arch/mips/lantiq/xway/mach-arv45xx.c
+@@ -0,0 +1,178 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/gpio.h>
++#include <linux/gpio_buttons.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/etherdevice.h>
++
++#include <machine.h>
++
++#include <xway.h>
++#include <lantiq_platform.h>
++
++#include "devices.h"
++
++#define ARV452_LATCH_SWITCH		(1 << 10)
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition arv45xx_partitions[] =
++{
++	{
++		.name	= "uboot",
++		.offset	= 0x0,
++		.size	= 0x20000,
++	},
++	{
++		.name	= "uboot_env",
++		.offset	= 0x20000,
++		.size	= 0x10000,
++	},
++	{
++		.name	= "linux",
++		.offset	= 0x30000,
++		.size	= 0x3c0000,
++	},
++	{
++		.name	= "board_config",
++		.offset	= 0x3f0000,
++		.size	= 0x10000,
++	},
++};
++#endif
++
++static struct physmap_flash_data arv45xx_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++	.nr_parts	= ARRAY_SIZE(arv45xx_partitions),
++	.parts		= arv45xx_partitions,
++#endif
++};
++
++static struct lq_pci_data lq_pci_data = {
++	.clock      = PCI_CLOCK_EXT,
++	.req_mask   = 0xf,
++};
++
++static struct lq_eth_data lq_eth_data = {
++	.mii_mode	= REV_MII_MODE,
++	.mac		= "\xff\xff\xff\xff\xff\xff",
++};
++
++static struct gpio_led
++arv4518_leds_gpio[] __initdata = {
++	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, },
++	{ .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, },
++	{ .name = "soc:blue:internet", .gpio = 5, .active_low = 1, },
++	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, },
++	{ .name = "soc:yello:wps", .gpio = 7, .active_low = 1, },
++	{ .name = "soc:red:wps", .gpio = 9, .active_low = 1, },
++	{ .name = "soc:blue:voip", .gpio = 32, .active_low = 1, },
++	{ .name = "soc:blue:fxs1", .gpio = 33, .active_low = 1, },
++	{ .name = "soc:blue:fxs2", .gpio = 34, .active_low = 1, },
++	{ .name = "soc:blue:fxo", .gpio = 35, .active_low = 1, },
++	{ .name = "soc:blue:voice", .gpio = 36, .active_low = 1, },
++	{ .name = "soc:blue:usb", .gpio = 37, .active_low = 1, },
++	{ .name = "soc:blue:wlan", .gpio = 38, .active_low = 1, },
++};
++
++static struct gpio_led
++arv452_leds_gpio[] __initdata = {
++	{ .name = "soc:blue:power", .gpio = 3, .active_low = 1, },
++	{ .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, },
++	{ .name = "soc:blue:internet", .gpio = 5, .active_low = 1, },
++	{ .name = "soc:red:power", .gpio = 6, .active_low = 1, },
++	{ .name = "soc:yello:wps", .gpio = 7, .active_low = 1, },
++	{ .name = "soc:red:wps", .gpio = 9, .active_low = 1, },
++	{ .name = "soc:blue:voip", .gpio = 32, .active_low = 1, },
++	{ .name = "soc:blue:fxs1", .gpio = 33, .active_low = 1, },
++	{ .name = "soc:blue:fxs2", .gpio = 34, .active_low = 1, },
++	{ .name = "soc:blue:fxo", .gpio = 35, .active_low = 1, },
++	{ .name = "soc:blue:voice", .gpio = 36, .active_low = 1, },
++	{ .name = "soc:blue:usb", .gpio = 37, .active_low = 1, },
++	{ .name = "soc:blue:wlan", .gpio = 38, .active_low = 1, },
++};
++
++static struct gpio_led arv4525_leds_gpio[] __initdata = {
++	{ .name = "soc:green:festnetz", .gpio = 4, .active_low = 1, },
++	{ .name = "soc:green:internet", .gpio = 5, .active_low = 1, },
++	{ .name = "soc:green:dsl", .gpio = 6, .active_low = 1, },
++	{ .name = "soc:green:wlan", .gpio = 8, .active_low = 1, },
++	{ .name = "soc:green:online", .gpio = 9, .active_low = 1, },
++};
++
++static void
++arv45xx_register_ethernet(void)
++{
++#define ARV45XX_BRN_MAC			0x3f0016
++	memcpy_fromio(lq_eth_data.mac,
++		(void *)KSEG1ADDR(LQ_FLASH_START + ARV45XX_BRN_MAC), 6);
++	lq_register_ethernet(&lq_eth_data);
++}
++
++static void __init
++arv4518_init(void)
++{
++	lq_register_gpio();
++	lq_register_gpio_ebu(0);
++	lq_register_gpio_leds(arv4518_leds_gpio, ARRAY_SIZE(arv4518_leds_gpio));
++	lq_register_asc(0);
++	lq_register_asc(1);
++	lq_register_nor(&arv45xx_flash_data);
++	lq_register_pci(&lq_pci_data);
++	lq_register_wdt();
++	arv45xx_register_ethernet();
++}
++
++MIPS_MACHINE(LANTIQ_MACH_ARV4518,
++			"ARV4518",
++			"ARV4518 - SMC7908A-ISP",
++			arv4518_init);
++
++static void __init
++arv452_init(void)
++{
++	lq_register_gpio();
++	lq_register_gpio_ebu(ARV452_LATCH_SWITCH);
++	lq_register_gpio_leds(arv452_leds_gpio, ARRAY_SIZE(arv452_leds_gpio));
++	lq_register_asc(0);
++	lq_register_asc(1);
++	lq_register_nor(&arv45xx_flash_data);
++	lq_register_pci(&lq_pci_data);
++	lq_register_wdt();
++	arv45xx_register_ethernet();
++}
++
++MIPS_MACHINE(LANTIQ_MACH_ARV452,
++			"ARV452",
++			"ARV452 - Airties WAV-281, Arcor A800",
++			arv452_init);
++
++static void __init
++arv4525_init(void)
++{
++	lq_register_gpio();
++	lq_register_gpio_leds(arv4525_leds_gpio, ARRAY_SIZE(arv4525_leds_gpio));
++	lq_register_asc(0);
++	lq_register_asc(1);
++	lq_register_nor(&arv45xx_flash_data);
++	lq_register_pci(&lq_pci_data);
++	lq_register_wdt();
++	lq_eth_data.mii_mode = MII_MODE;
++	arv45xx_register_ethernet();
++}
++
++MIPS_MACHINE(LANTIQ_MACH_ARV4525,
++			"ARV4525",
++			"ARV4525 - Speedport W502V",
++			arv4525_init);
diff --git a/target/linux/lantiq/patches/700-dwc_otg.patch b/target/linux/lantiq/patches/700-dwc_otg.patch
new file mode 100644
index 0000000000..9176770426
--- /dev/null
+++ b/target/linux/lantiq/patches/700-dwc_otg.patch
@@ -0,0 +1,15693 @@
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -111,6 +111,8 @@
+ 
+ source "drivers/usb/host/Kconfig"
+ 
++source "drivers/usb/dwc_otg/Kconfig"
++
+ source "drivers/usb/musb/Kconfig"
+ 
+ source "drivers/usb/class/Kconfig"
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -27,6 +27,8 @@
+ 
+ obj-$(CONFIG_USB_WUSB)		+= wusbcore/
+ 
++obj-$(CONFIG_DWC_OTG)           += dwc_otg/
++
+ obj-$(CONFIG_USB_ACM)		+= class/
+ obj-$(CONFIG_USB_PRINTER)	+= class/
+ obj-$(CONFIG_USB_WDM)		+= class/
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Kconfig
+@@ -0,0 +1,37 @@
++config DWC_OTG
++        tristate "Synopsis DWC_OTG support"
++        depends on USB
++        help
++          This driver supports Synopsis DWC_OTG IP core
++		  embebbed on many SOCs (ralink, infineon, etc)
++
++choice
++        prompt "USB Operation Mode"
++        depends on DWC_OTG
++        default DWC_OTG_HOST_ONLY
++
++config DWC_OTG_HOST_ONLY
++        bool "HOST ONLY MODE"
++        depends on DWC_OTG
++
++config DWC_OTG_DEVICE_ONLY
++        bool "DEVICE ONLY MODE"
++        depends on DWC_OTG
++endchoice
++
++choice
++        prompt "Platform"
++        depends on DWC_OTG
++        default DWC_OTG_LANTIQ
++
++config DWC_OTG_LANTIQ
++        bool "Lantiq"
++        depends on LANTIQ
++        help
++          Danube USB Host Controller
++		  platform support
++endchoice
++
++config DWC_OTG_DEBUG
++        bool "Enable debug mode"
++        depends on DWC_OTG
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Makefile
+@@ -0,0 +1,39 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
++EXTRA_CFLAGS   += -DDEBUG
++endif
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode based on the configuration selected by the user
++ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
++	EXTRA_CFLAGS   += -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY
++	EXTRA_CFLAGS   += -DDWC_OTG_EN_ISOC -DDWC_EN_ISOC
++else ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
++	EXTRA_CFLAGS   += -DDWC_OTG_DEVICE_ONLY
++else
++	EXTRA_CFLAGS   += -DDWC_OTG_MODE
++endif
++
++#	EXTRA_CFLAGS += -DDWC_HS_ELECT_TST
++#	EXTRA_CFLAGS    += -DDWC_OTG_EXT_CHG_PUMP
++
++ifeq ($(CONFIG_DWC_OTG_LANTIQ),y)
++     EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY  -D__KERNEL__ 
++endif
++ifeq ($(CONFIG_DWC_OTG_LANTIQ),m)
++     EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_HOST_ONLY -DMODULE -D__KERNEL__  -DDEBUG
++endif
++
++obj-$(CONFIG_DWC_OTG)	:= dwc_otg.o
++dwc_otg-objs    := dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
++#dwc_otg-objs	+= dwc_otg_pcd.o dwc_otg_pcd_intr.o 
++dwc_otg-objs    += dwc_otg_attr.o 
++dwc_otg-objs    += dwc_otg_cil.o dwc_otg_cil_intr.o
++dwc_otg-objs	+= dwc_otg_ifx.o
++dwc_otg-objs    += dwc_otg_driver.o
++
++#obj-$(CONFIG_DWC_OTG_IFX)	:= dwc_otg_ifx.o
++#dwc_otg_ifx-objs		:= dwc_otg_ifx.o
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
+@@ -0,0 +1,802 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file 
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.  The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes" 
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface.  These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++ 
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++ 
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++ 
++ </table>
++ 
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++ 
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>  /* permission constants */
++
++#include <asm/io.h>
++
++#include "dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++// #include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++// 20070316, winder added.
++#ifndef SZ_256K
++#define SZ_256K                         0x00040000
++#endif
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	val = (val & (_mask_)) >> _shift_; \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	uint32_t clear = set; \
++	clear = ((~clear) << _shift_) & _mask_; \
++	set = (set << _shift_) & _mask_; \
++	dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++	dwc_modify_reg32(_addr_, clear, set); \
++	return count; \
++}
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
++{ \
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++	dwc_write_reg32(_addr_, val); \
++	return count; \
++}
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access 	Read/Write
++ */
++static ssize_t regoffset_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                                size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t offset = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x\n", offset);
++	if (offset < SZ_256K ) {
++		otg_dev->reg_offset = offset;
++	}
++	else {
++		dev_err( _dev, "invalid offset\n" );
++	}
++
++	return count;
++}
++DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, regoffset_show, regoffset_store);
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t val;
++	volatile uint32_t *addr;
++        
++	if (otg_dev->reg_offset != 0xFFFFFFFF &&  0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset + 
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); 
++		val = dwc_read_reg32( addr );             
++		return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
++				"Reg@0x%06x = 0x%08x\n", 
++				otg_dev->reg_offset, val);
++	}
++	else {
++		dev_err(_dev, "Invalid offset (0x%0x)\n", 
++			otg_dev->reg_offset);
++		return sprintf(buf, "invalid offset\n" );
++	}
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ * 
++ */
++static ssize_t regvalue_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                               size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	volatile uint32_t * addr;
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++	if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset + 
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); 
++		dwc_write_reg32( addr, val );
++	}
++	else {
++		dev_err(_dev, "Invalid Register Offset (0x%08x)\n", 
++			otg_dev->reg_offset);
++	}
++	return count;
++}
++DEVICE_ATTR(regvalue,  S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
++
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++			  size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.hnpreq = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++			  size_t count ) 
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++	return count;
++}
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
++}
++
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                               size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t on = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtpwr = on;
++
++	//dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++
++	return count;
++}
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                                 size_t count ) 
++{
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtsusp = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dctl_data_t val;
++	val.d32 = dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
++	return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n", 
++                        val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Initiate a remote wakeup of the host.  The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ * 
++ */
++static ssize_t remote_wakeup_store( struct device *_dev, struct device_attribute *attr, const char *buf, 
++                                    size_t count ) 
++{
++#ifndef DWC_HOST_ONLY
++        uint32_t val = simple_strtoul(buf, NULL, 16);        
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	if (val&1) {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++	}
++	else {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++	}
++#endif
++	return count;
++}
++DEVICE_ATTR(remote_wakeup,  S_IRUGO|S_IWUSR, remote_wakeup_show, 
++            remote_wakeup_store);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifdef DEBUG
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	printk("%s otg_dev=0x%p\n", __FUNCTION__, otg_dev);
++
++        dwc_otg_dump_global_registers( otg_dev->core_if);
++        if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++                dwc_otg_dump_host_registers( otg_dev->core_if);
++        } else {
++                dwc_otg_dump_dev_registers( otg_dev->core_if);
++        }
++#endif
++
++   	return sprintf( buf, "Register Dump\n" );
++}
++
++DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump\n" );
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump Frame Remaining\n" );
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ	
++static ssize_t rd_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++	int i;
++	int time;
++	int start_jiffies;
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf) 
++{
++	int i;
++	int time;
++	int start_jiffies;
++        dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	uint32_t reg_val;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create (struct device *_dev)
++{
++    int retval;
++    
++    retval = device_create_file(_dev, &dev_attr_regoffset);
++    retval += device_create_file(_dev, &dev_attr_regvalue);
++    retval += device_create_file(_dev, &dev_attr_mode);
++    retval += device_create_file(_dev, &dev_attr_hnpcapable);
++    retval += device_create_file(_dev, &dev_attr_srpcapable);
++    retval += device_create_file(_dev, &dev_attr_hnp);
++    retval += device_create_file(_dev, &dev_attr_srp);
++    retval += device_create_file(_dev, &dev_attr_buspower);
++    retval += device_create_file(_dev, &dev_attr_bussuspend);
++    retval += device_create_file(_dev, &dev_attr_busconnected);
++    retval += device_create_file(_dev, &dev_attr_gotgctl);
++    retval += device_create_file(_dev, &dev_attr_gusbcfg);
++    retval += device_create_file(_dev, &dev_attr_grxfsiz);
++    retval += device_create_file(_dev, &dev_attr_gnptxfsiz);
++    retval += device_create_file(_dev, &dev_attr_gpvndctl);
++    retval += device_create_file(_dev, &dev_attr_ggpio);
++    retval += device_create_file(_dev, &dev_attr_guid);
++    retval += device_create_file(_dev, &dev_attr_gsnpsid);
++    retval += device_create_file(_dev, &dev_attr_devspeed);
++    retval += device_create_file(_dev, &dev_attr_enumspeed);
++    retval += device_create_file(_dev, &dev_attr_hptxfsiz);
++    retval += device_create_file(_dev, &dev_attr_hprt0);
++    retval += device_create_file(_dev, &dev_attr_remote_wakeup);
++    retval += device_create_file(_dev, &dev_attr_regdump);
++    retval += device_create_file(_dev, &dev_attr_hcddump);
++    retval += device_create_file(_dev, &dev_attr_hcd_frrem);
++    retval += device_create_file(_dev, &dev_attr_rd_reg_test);
++    retval += device_create_file(_dev, &dev_attr_wr_reg_test);
++
++    if(retval != 0)
++    {
++        DWC_PRINT("cannot create sysfs device files.\n");
++        // DWC_PRINT("killing own sysfs device files!\n");
++        dwc_otg_attr_remove(_dev);
++    }
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove (struct device *_dev)
++{
++	device_remove_file(_dev, &dev_attr_regoffset);
++	device_remove_file(_dev, &dev_attr_regvalue);
++	device_remove_file(_dev, &dev_attr_mode);
++	device_remove_file(_dev, &dev_attr_hnpcapable);
++	device_remove_file(_dev, &dev_attr_srpcapable);
++	device_remove_file(_dev, &dev_attr_hnp);
++	device_remove_file(_dev, &dev_attr_srp);
++	device_remove_file(_dev, &dev_attr_buspower);
++	device_remove_file(_dev, &dev_attr_bussuspend);
++	device_remove_file(_dev, &dev_attr_busconnected);
++	device_remove_file(_dev, &dev_attr_gotgctl);
++	device_remove_file(_dev, &dev_attr_gusbcfg);
++	device_remove_file(_dev, &dev_attr_grxfsiz);
++	device_remove_file(_dev, &dev_attr_gnptxfsiz);
++	device_remove_file(_dev, &dev_attr_gpvndctl);
++	device_remove_file(_dev, &dev_attr_ggpio);
++	device_remove_file(_dev, &dev_attr_guid);
++	device_remove_file(_dev, &dev_attr_gsnpsid);
++	device_remove_file(_dev, &dev_attr_devspeed);
++	device_remove_file(_dev, &dev_attr_enumspeed);
++	device_remove_file(_dev, &dev_attr_hptxfsiz);
++	device_remove_file(_dev, &dev_attr_hprt0);      
++	device_remove_file(_dev, &dev_attr_remote_wakeup);      
++	device_remove_file(_dev, &dev_attr_regdump);
++	device_remove_file(_dev, &dev_attr_hcddump);
++	device_remove_file(_dev, &dev_attr_hcd_frrem);
++	device_remove_file(_dev, &dev_attr_rd_reg_test);
++	device_remove_file(_dev, &dev_attr_wr_reg_test);
++}
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
+@@ -0,0 +1,67 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510275 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++
++void dwc_otg_attr_create (struct device *_dev);
++void dwc_otg_attr_remove (struct device *_dev);
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
+@@ -0,0 +1,3025 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file 
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.  
++ * - The OS services used will be abstracted by using inline functions
++ *   or macros.
++ *
++ */
++#include <asm/unaligned.h>
++
++#ifdef DEBUG
++#include <linux/jiffies.h>
++#endif
++
++#include "dwc_otg_plat.h"
++
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++/** 
++ * This function is called to initialize the DWC_otg CSR data
++ * structures.  The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller.  The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers.  The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param[in] _reg_base_addr Base address of DWC_otg core registers
++ * @param[in] _core_params Pointer to the core configuration parameters 
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++                                    dwc_otg_core_params_t *_core_params)
++{
++    dwc_otg_core_if_t *core_if = 0;
++    dwc_otg_dev_if_t *dev_if = 0;
++    dwc_otg_host_if_t *host_if = 0;
++    uint8_t *reg_base = (uint8_t *)_reg_base_addr;
++    int i = 0;
++
++    DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, _reg_base_addr, _core_params);
++   
++    core_if = kmalloc( sizeof(dwc_otg_core_if_t), GFP_KERNEL);
++    if (core_if == 0) {
++        DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
++        return 0;
++    }
++    memset(core_if, 0, sizeof(dwc_otg_core_if_t));
++        
++    core_if->core_params = _core_params;
++    core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
++    /*
++     * Allocate the Device Mode structures.
++     */
++    dev_if = kmalloc( sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
++    if (dev_if == 0) {
++        DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++        kfree( core_if );
++        return 0;
++    }
++
++    dev_if->dev_global_regs = 
++        (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
++        
++    for (i=0; i<MAX_EPS_CHANNELS; i++) {
++        dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++            (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++            (i * DWC_EP_REG_OFFSET));
++                
++        dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) 
++            (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++            (i * DWC_EP_REG_OFFSET));
++        DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", 
++                            i, &dev_if->in_ep_regs[i]->diepctl);
++        DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", 
++                            i, &dev_if->out_ep_regs[i]->doepctl);
++    }
++    dev_if->speed = 0; // unknown
++    //dev_if->num_eps = MAX_EPS_CHANNELS;
++    //dev_if->num_perio_eps = 0;
++        
++    core_if->dev_if = dev_if;
++    /*
++    * Allocate the Host Mode structures.
++    */
++    host_if = kmalloc( sizeof(dwc_otg_host_if_t), GFP_KERNEL);
++    if (host_if == 0) {
++        DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
++        kfree( dev_if );
++        kfree( core_if );
++        return 0;
++    }
++
++    host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++        (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++    host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++    for (i=0; i<MAX_EPS_CHANNELS; i++) {
++        host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++            (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + 
++            (i * DWC_OTG_CHAN_REGS_OFFSET));
++        DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", 
++                            i, &host_if->hc_regs[i]->hcchar);
++    }
++    host_if->num_host_channels = MAX_EPS_CHANNELS;
++    core_if->host_if = host_if;
++
++    for (i=0; i<MAX_EPS_CHANNELS; i++) {
++        core_if->data_fifo[i] = 
++            (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET + 
++            (i * DWC_OTG_DATA_FIFO_SIZE)); 
++        DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", 
++            i, (unsigned)core_if->data_fifo[i]);
++    } // for loop.
++        
++    core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++    /*
++     * Store the contents of the hardware configuration registers here for
++     * easy access later.
++     */
++    core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
++    core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
++    core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
++    core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
++
++    DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
++    DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
++    DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
++    DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
++        
++
++    DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
++    DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
++    DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
++    DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
++    DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
++    DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
++    DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
++
++    DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
++    DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
++
++    /*
++     * Set the SRP sucess bit for FS-I2c
++     */
++    core_if->srp_success = 0;
++    core_if->srp_timer_started = 0;
++	
++    return core_if;
++}
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ * 
++ * @param[in] _core_if The core interface pointer returned from
++ * dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove( dwc_otg_core_if_t *_core_if )
++{
++        /* Disable all interrupts */
++        dwc_modify_reg32( &_core_if->core_global_regs->gahbcfg, 1, 0);
++        dwc_write_reg32( &_core_if->core_global_regs->gintmsk, 0);
++
++        if ( _core_if->dev_if ) {
++                kfree( _core_if->dev_if );
++        }
++        if ( _core_if->host_if ) {
++                kfree( _core_if->host_if );
++        }
++        kfree( _core_if );
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if )
++{
++        gahbcfg_data_t ahbcfg = { .d32 = 0};
++        ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++        dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if )
++{
++        gahbcfg_data_t ahbcfg = { .d32 = 0};
++        ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++        dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param[in] _core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = 
++                _core_if->core_global_regs;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++        /* Clear any pending OTG Interrupts */
++        dwc_write_reg32( &global_regs->gotgint, 0xFFFFFFFF); 
++        /* Clear any pending interrupts */
++        dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF); 
++        /* 
++         * Enable the interrupts in the GINTMSK. 
++         */
++        intr_mask.b.modemismatch = 1;
++        intr_mask.b.otgintr = 1;
++        if (!_core_if->dma_enable) {
++                intr_mask.b.rxstsqlvl = 1;
++        }
++        intr_mask.b.conidstschng = 1;
++        intr_mask.b.wkupintr = 1;
++        intr_mask.b.disconnect = 1;
++        intr_mask.b.usbsuspend = 1;
++	intr_mask.b.sessreqintr = 1;
++        dwc_write_reg32( &global_regs->gintmsk, intr_mask.d32);
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t *_core_if)
++{
++	uint32_t 	val;
++	hcfg_data_t 	hcfg;
++
++	if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (_core_if->core_params->ulpi_fs_ls)) ||
++	    (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
++	{
++		/* Full speed PHY */
++		val = DWC_HCFG_48_MHZ;
++	} else {
++		/* High speed PHY running at full speed or high speed */
++		val = DWC_HCFG_30_60_MHZ;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++	hcfg.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.fslspclksel = val;
++	dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t *_core_if)
++{
++	uint32_t 	val;
++	dcfg_data_t 	dcfg;
++
++	if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (_core_if->core_params->ulpi_fs_ls)) ||
++	     (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) 
++	{
++		/* Full speed PHY */
++		val = 0x3;
++	} else if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	} else {
++		/* High speed PHY running at high speed */
++		val = 0x0;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++	dcfg.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	dwc_write_reg32(&_core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param _pcd the pcd structure.
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * _core_if)
++{
++	uint32_t num_in_eps = 0;
++	uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
++	uint32_t num_tx_fifos = _core_if->hwcfg4.b.num_in_eps;
++	int i;
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_in_eps++;
++		hwcfg1 >>= 2;
++	}
++	if (_core_if->hwcfg4.b.ded_fifo_en) {
++		num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++	}
++	return num_in_eps;
++}
++
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param _pcd the pcd structure.
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * _core_if)
++{
++	uint32_t num_out_eps = 0;
++	uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
++	int i;
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x2))
++			num_out_eps++;
++		hwcfg1 >>= 2;
++	}
++	return num_out_eps;
++}
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param _core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t *_core_if) 
++{
++	dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
++    dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++    int i = 0;
++    gahbcfg_data_t ahbcfg = { .d32 = 0};
++    gusbcfg_data_t usbcfg = { .d32 = 0 };
++    gi2cctl_data_t i2cctl = {.d32 = 0};
++
++    DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n",_core_if);
++
++    /* Common Initialization */
++
++    usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++	DWC_DEBUGPL(DBG_CIL, "USB config register: 0x%08x\n", usbcfg.d32);
++
++    /* Program the ULPI External VBUS bit if needed */
++    //usbcfg.b.ulpi_ext_vbus_drv = 1;
++    //usbcfg.b.ulpi_ext_vbus_drv = 0;
++    usbcfg.b.ulpi_ext_vbus_drv = 
++        (_core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++    /* Set external TS Dline pulsing */
++    usbcfg.b.term_sel_dl_pulse = (_core_if->core_params->ts_dline == 1) ? 1 : 0;
++    dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++    /* Reset the Controller */
++    dwc_otg_core_reset( _core_if );
++
++    /* Initialize parameters from Hardware configuration registers. */
++#if 0
++    dev_if->num_eps = _core_if->hwcfg2.b.num_dev_ep;
++    dev_if->num_perio_eps = _core_if->hwcfg4.b.num_dev_perio_in_ep;
++#else
++	dev_if->num_in_eps = calc_num_in_eps(_core_if);
++	dev_if->num_out_eps = calc_num_out_eps(_core_if);
++#endif        
++	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
++		       _core_if->hwcfg4.b.num_dev_perio_in_ep);
++	DWC_DEBUGPL(DBG_CIL, "Is power optimization enabled?  %s\n",
++		     _core_if->hwcfg4.b.power_optimiz ? "Yes" : "No");
++	DWC_DEBUGPL(DBG_CIL, "vbus_valid filter enabled?  %s\n",
++		     _core_if->hwcfg4.b.vbus_valid_filt_en ? "Yes" : "No");
++	DWC_DEBUGPL(DBG_CIL, "iddig filter enabled?  %s\n",
++		     _core_if->hwcfg4.b.iddig_filt_en ? "Yes" : "No");
++
++    DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",_core_if->hwcfg4.b.num_dev_perio_in_ep);
++    for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++        dev_if->perio_tx_fifo_size[i] =
++		    dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", i,
++			     dev_if->perio_tx_fifo_size[i]);
++	}
++	for (i = 0; i < _core_if->hwcfg4.b.num_in_eps; i++) {
++		dev_if->tx_fifo_size[i] =
++		    dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", i,
++			     dev_if->perio_tx_fifo_size[i]);
++	}
++        
++    _core_if->total_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
++	_core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz);
++	_core_if->nperio_tx_fifo_size = dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
++        
++    DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", _core_if->total_fifo_size);
++    DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", _core_if->rx_fifo_size);
++    DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", _core_if->nperio_tx_fifo_size);
++
++    /* This programming sequence needs to happen in FS mode before any other
++    * programming occurs */
++    if ((_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++        (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++        /* If FS mode with FS PHY */
++
++        /* core_init() is now called on every switch so only call the
++         * following for the first time through. */
++        if (!_core_if->phy_init_done) {
++            _core_if->phy_init_done = 1;
++            DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++            usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++            usbcfg.b.physel = 1;
++            dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++            /* Reset after a PHY select */
++            dwc_otg_core_reset( _core_if );
++        }
++
++        /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.  Also
++         * do this on HNP Dev/Host mode switches (done in dev_init and
++         * host_init). */
++        if (dwc_otg_is_host_mode(_core_if)) {
++			DWC_DEBUGPL(DBG_CIL, "host mode\n");
++            init_fslspclksel(_core_if);
++		} else {
++			DWC_DEBUGPL(DBG_CIL, "device mode\n");
++            init_devspd(_core_if);
++        }
++
++        if (_core_if->core_params->i2c_enable) {
++            DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++            /* Program GUSBCFG.OtgUtmifsSel to I2C */
++            usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++            usbcfg.b.otgutmifssel = 1;
++            dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++				
++            /* Program GI2CCTL.I2CEn */
++            i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
++            i2cctl.b.i2cdevaddr = 1;
++            i2cctl.b.i2cen = 0;
++            dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++            i2cctl.b.i2cen = 1;
++            dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++        }
++
++    } /* endif speed == DWC_SPEED_PARAM_FULL */
++	else {
++        /* High speed PHY. */
++        if (!_core_if->phy_init_done) {
++            _core_if->phy_init_done = 1;
++			DWC_DEBUGPL(DBG_CIL, "High spped PHY\n");
++            /* HS PHY parameters.  These parameters are preserved
++             * during soft reset so only program the first time.  Do
++             * a soft reset immediately after setting phyif.  */
++            usbcfg.b.ulpi_utmi_sel = _core_if->core_params->phy_type;
++            if (usbcfg.b.ulpi_utmi_sel == 2) { // winder
++				DWC_DEBUGPL(DBG_CIL, "ULPI\n");
++                /* ULPI interface */
++                usbcfg.b.phyif = 0;
++                usbcfg.b.ddrsel = _core_if->core_params->phy_ulpi_ddr;
++            } else {
++                /* UTMI+ interface */
++                if (_core_if->core_params->phy_utmi_width == 16) {
++                    usbcfg.b.phyif = 1;
++					DWC_DEBUGPL(DBG_CIL, "UTMI+ 16\n");
++				} else {
++					DWC_DEBUGPL(DBG_CIL, "UTMI+ 8\n");
++                    usbcfg.b.phyif = 0;
++                }
++            }
++            dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
++
++            /* Reset after setting the PHY parameters */
++            dwc_otg_core_reset( _core_if );
++        }
++    }
++
++    if ((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++        (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++        (_core_if->core_params->ulpi_fs_ls)) 
++    {
++        DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++        usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++        usbcfg.b.ulpi_fsls = 1;
++        usbcfg.b.ulpi_clk_sus_m = 1;
++        dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++	} else {
++		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS=0\n");
++        usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++        usbcfg.b.ulpi_fsls = 0;
++        usbcfg.b.ulpi_clk_sus_m = 0;
++        dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++    }
++
++    /* Program the GAHBCFG Register.*/
++    switch (_core_if->hwcfg2.b.architecture){
++
++        case DWC_SLAVE_ONLY_ARCH:
++            DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++            ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++            ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++            _core_if->dma_enable = 0;
++            break;
++
++        case DWC_EXT_DMA_ARCH:
++            DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++            ahbcfg.b.hburstlen = _core_if->core_params->dma_burst_size; 
++            _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
++            break;
++
++        case DWC_INT_DMA_ARCH:
++            DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++            //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
++            ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR4;
++            _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
++            break;
++    }
++    ahbcfg.b.dmaenable = _core_if->dma_enable;
++    dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
++	_core_if->en_multiple_tx_fifo = _core_if->hwcfg4.b.ded_fifo_en;
++
++    /* 
++     * Program the GUSBCFG register. 
++     */
++    usbcfg.d32 = dwc_read_reg32( &global_regs->gusbcfg );
++
++    switch (_core_if->hwcfg2.b.op_mode) {
++        case DWC_MODE_HNP_SRP_CAPABLE:
++            usbcfg.b.hnpcap = (_core_if->core_params->otg_cap ==
++            DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_SRP_ONLY_CAPABLE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_NO_HNP_SRP_CAPABLE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = 0;
++            break;
++
++        case DWC_MODE_SRP_CAPABLE_DEVICE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = 0;
++            break;
++
++        case DWC_MODE_SRP_CAPABLE_HOST:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++            DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++            break;
++
++        case DWC_MODE_NO_SRP_CAPABLE_HOST:
++            usbcfg.b.hnpcap = 0;
++            usbcfg.b.srpcap = 0;
++            break;
++    }
++
++    dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
++        
++    /* Enable common interrupts */
++    dwc_otg_enable_common_interrupts( _core_if );
++
++    /* Do device or host intialization based on mode during PCD
++     * and HCD initialization  */
++    if (dwc_otg_is_host_mode( _core_if )) {
++        DWC_DEBUGPL(DBG_ANY, "Host Mode\n" );
++        _core_if->op_state = A_HOST;
++    } else {
++        DWC_DEBUGPL(DBG_ANY, "Device Mode\n" );
++        _core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++        dwc_otg_core_dev_init( _core_if );
++#endif
++    }
++}
++
++
++/** 
++ * This function enables the Device mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
++
++        DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++        /* Disable all interrupts. */
++        dwc_write_reg32( &global_regs->gintmsk, 0);
++
++        /* Clear any pending interrupts */
++        dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF); 
++
++        /* Enable the common interrupts */
++        dwc_otg_enable_common_interrupts( _core_if );
++
++        /* Enable interrupts */
++        intr_mask.b.usbreset = 1;
++        intr_mask.b.enumdone = 1;
++        //intr_mask.b.epmismatch = 1;
++        intr_mask.b.inepintr = 1;
++        intr_mask.b.outepintr = 1;
++        intr_mask.b.erlysuspend = 1;
++	if (_core_if->en_multiple_tx_fifo == 0) {
++		intr_mask.b.epmismatch = 1;
++	}
++
++        /** @todo NGS: Should this be a module parameter? */
++        intr_mask.b.isooutdrop = 1;
++        intr_mask.b.eopframe = 1;
++        intr_mask.b.incomplisoin = 1;
++        intr_mask.b.incomplisoout = 1;
++
++        dwc_modify_reg32( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++        DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, 
++                    dwc_read_reg32( &global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ * 
++ * @param _core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = 
++                _core_if->core_global_regs;
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++        dwc_otg_core_params_t *params = _core_if->core_params;
++        dcfg_data_t dcfg = {.d32 = 0};
++        grstctl_t resetctl = { .d32=0 };
++        int i;
++        uint32_t rx_fifo_size;
++        fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize;
++	dthrctl_data_t dthrctl;
++
++        fifosize_data_t ptxfifosize;
++        
++        /* Restart the Phy Clock */
++        dwc_write_reg32(_core_if->pcgcctl, 0);
++        
++        /* Device configuration register */
++	init_devspd(_core_if);
++	dcfg.d32 = dwc_read_reg32( &dev_if->dev_global_regs->dcfg);
++        dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++        dwc_write_reg32( &dev_if->dev_global_regs->dcfg, dcfg.d32 );
++
++        /* Configure data FIFO sizes */
++        if ( _core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo ) {
++                
++                DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", _core_if->total_fifo_size);
++                DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
++                DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
++
++		/* Rx FIFO */
++                DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->grxfsiz));
++                rx_fifo_size = params->dev_rx_fifo_size;
++                dwc_write_reg32( &global_regs->grxfsiz, rx_fifo_size );
++                DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->grxfsiz));
++
++		/** Set Periodic Tx FIFO Mask all bits 0 */
++	    _core_if->p_tx_msk = 0;
++
++		/** Set Tx FIFO Mask all bits 0 */
++	    _core_if->tx_msk = 0;
++		if (_core_if->en_multiple_tx_fifo == 0) {
++		/* Non-periodic Tx FIFO */
++                DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->gnptxfsiz));
++                nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
++                nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++                dwc_write_reg32( &global_regs->gnptxfsiz, nptxfifosize.d32 );
++                DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", 
++                            dwc_read_reg32(&global_regs->gnptxfsiz));
++
++
++                /**@todo NGS: Fix Periodic FIFO Sizing! */
++		/*
++		 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++		 * Indexes of the FIFO size module parameters in the
++		 * dev_perio_tx_fifo_size array and the FIFO size registers in
++		 * the dptxfsiz array run from 0 to 14.
++		 */
++                /** @todo Finish debug of this */   
++		    ptxfifosize.b.startaddr =
++		    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
++			ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
++				     i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++				dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],ptxfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
++				     i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++                        ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++                }
++		} else {
++
++		    /*
++		     * Tx FIFOs These FIFOs are numbered from 1 to 15.
++		     * Indexes of the FIFO size module parameters in the
++		     * dev_tx_fifo_size array and the FIFO size registers in
++		     * the dptxfsiz_dieptxf array run from 0 to 14.
++		     */
++
++		    /* Non-periodic Tx FIFO */
++		    DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				dwc_read_reg32(&global_regs->gnptxfsiz));
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++			dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				      dwc_read_reg32(&global_regs->gnptxfsiz));
++			txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i = 1;i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
++				txfifosize.b.depth = params->dev_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
++				      i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++				dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i - 1],txfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
++				      i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
++				txfifosize.b.startaddr += txfifosize.b.depth;
++        }
++		}
++	}
++        /* Flush the FIFOs */
++        dwc_otg_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
++        dwc_otg_flush_rx_fifo(_core_if);
++
++	/* Flush the Learning Queue. */
++	resetctl.b.intknqflsh = 1;
++        dwc_write_reg32( &_core_if->core_global_regs->grstctl, resetctl.d32);
++
++        /* Clear all pending Device Interrupts */
++        dwc_write_reg32( &dev_if->dev_global_regs->diepmsk, 0 );
++        dwc_write_reg32( &dev_if->dev_global_regs->doepmsk, 0 );
++        dwc_write_reg32( &dev_if->dev_global_regs->daint, 0xFFFFFFFF );
++        dwc_write_reg32( &dev_if->dev_global_regs->daintmsk, 0 );
++
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		} else {
++			depctl.d32 = 0;
++		}
++		dwc_write_reg32( &dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++	}
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		} else {
++			depctl.d32 = 0;
++		}
++		dwc_write_reg32( &dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++                //dwc_write_reg32( &dev_if->in_ep_regs[i]->dieptsiz, 0);
++                dwc_write_reg32( &dev_if->out_ep_regs[i]->doeptsiz, 0);
++                //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepdma, 0);
++                dwc_write_reg32( &dev_if->out_ep_regs[i]->doepdma, 0);
++                //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepint, 0xFF);
++                dwc_write_reg32( &dev_if->out_ep_regs[i]->doepint, 0xFF);
++        }
++        
++	if (_core_if->en_multiple_tx_fifo && _core_if->dma_enable) {
++		dev_if->non_iso_tx_thr_en = _core_if->core_params->thr_ctl & 0x1;
++		dev_if->iso_tx_thr_en = (_core_if->core_params->thr_ctl >> 1) & 0x1;
++		dev_if->rx_thr_en = (_core_if->core_params->thr_ctl >> 2) & 0x1;
++		dev_if->rx_thr_length = _core_if->core_params->rx_thr_length;
++		dev_if->tx_thr_length = _core_if->core_params->tx_thr_length;
++		dthrctl.d32 = 0;
++		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++		dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl,dthrctl.d32);
++		DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\n"
++					"Rx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++					dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
++					dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
++					dthrctl.b.rx_thr_len);
++	}
++        dwc_otg_enable_device_interrupts( _core_if );        
++	{
++		diepmsk_data_t msk = {.d32 = 0};
++		msk.b.txfifoundrn = 1;
++		dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32,msk.d32);
++}
++}
++
++/** 
++ * This function enables the Host mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++        DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++        /* Disable all interrupts. */
++        dwc_write_reg32(&global_regs->gintmsk, 0);
++
++        /* Clear any pending interrupts. */
++        dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); 
++
++        /* Enable the common interrupts */
++        dwc_otg_enable_common_interrupts(_core_if);
++
++	/*
++	 * Enable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++        //dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++        //dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/** 
++ * This function disables the Host Mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs =
++		_core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++        DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++         
++	/*
++	 * Disable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++        intr_mask.b.ptxfempty = 1;
++	intr_mask.b.nptxfempty = 1;
++        
++        dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++#if 1
++/* currently not used, keep it here as if needed later */
++static int phy_read(dwc_otg_core_if_t * _core_if, int addr)
++{
++	u32 val;
++	int timeout = 10;
++
++	dwc_write_reg32(&_core_if->core_global_regs->gpvndctl,
++			0x02000000 | (addr << 16));
++	val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++	while (((val & 0x08000000) == 0) && (timeout--)) {
++		udelay(1000);
++		val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++	}
++	val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++	printk("%s: addr=%02x regval=%02x\n", __func__, addr, val & 0x000000ff);
++
++	return 0;
++}
++#endif
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	dwc_otg_host_if_t 	*host_if = _core_if->host_if;
++        dwc_otg_core_params_t 	*params = _core_if->core_params;
++	hprt0_data_t 		hprt0 = {.d32 = 0};
++        fifosize_data_t 	nptxfifosize;
++        fifosize_data_t 	ptxfifosize;
++	int			i;
++	hcchar_data_t		hcchar;
++	hcfg_data_t		hcfg;
++	dwc_otg_hc_regs_t	*hc_regs;
++	int			num_channels;
++	gotgctl_data_t  gotgctl = {.d32 = 0};
++
++	DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, _core_if);
++
++        /* Restart the Phy Clock */
++        dwc_write_reg32(_core_if->pcgcctl, 0);
++        
++	/* Initialize Host Configuration Register */
++	init_fslspclksel(_core_if);
++	if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++		hcfg.b.fslssupp = 1;
++		dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	/* Configure data FIFO sizes */
++	if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++                DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", _core_if->total_fifo_size);
++                DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
++                DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
++                DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++		dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++
++		/* Non-periodic Tx FIFO */
++                DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++                nptxfifosize.b.depth  = params->host_nperio_tx_fifo_size;
++                nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++                dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++                DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++		
++		/* Periodic Tx FIFO */
++                DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++                ptxfifosize.b.depth  = params->host_perio_tx_fifo_size;
++                ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++                dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
++                DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++	}
++
++        /* Clear Host Set HNP Enable in the OTG Control Register */
++        gotgctl.b.hstsethnpen = 1;
++        dwc_modify_reg32( &global_regs->gotgctl, gotgctl.d32, 0);
++
++	/* Make sure the FIFOs are flushed. */
++	dwc_otg_flush_tx_fifo(_core_if, 0x10 /* all Tx FIFOs */);
++	dwc_otg_flush_rx_fifo(_core_if);
++
++	/* Flush out any leftover queued requests. */
++	num_channels = _core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		hc_regs = _core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 0;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++	}
++	       
++	/* Halt all channels to put them into a known state. */
++	for (i = 0; i < num_channels; i++) {
++		int count = 0;
++		hc_regs = _core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++		do {
++			hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++			if (++count > 200) {
++				DWC_ERROR("%s: Unable to clear halt on channel %d\n",
++					  __func__, i);
++				break;
++			}
++			udelay(100);
++		} while (hcchar.b.chen);
++	}
++
++	/* Turn on the vbus power. */
++        DWC_PRINT("Init: Port Power? op_state=%d\n", _core_if->op_state);
++        if (_core_if->op_state == A_HOST){   
++                hprt0.d32 = dwc_otg_read_hprt0(_core_if);
++                DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++                if (hprt0.b.prtpwr == 0 ) {
++                        hprt0.b.prtpwr = 1;
++                        dwc_write_reg32(host_if->hprt0, hprt0.d32);
++                }  
++        }
++
++        dwc_otg_enable_host_interrupts( _core_if );
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ * @param _hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	uint32_t intr_enable;
++	hcintmsk_data_t hc_intr_mask;
++	gintmsk_data_t gintmsk = {.d32 = 0};
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++
++	uint8_t hc_num = _hc->hc_num;
++	dwc_otg_host_if_t *host_if = _core_if->host_if;
++	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++	/* Clear old interrupt conditions for this host channel. */
++	hc_intr_mask.d32 = 0xFFFFFFFF;
++	hc_intr_mask.b.reserved = 0;
++	dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
++
++	/* Enable channel interrupts required for this transfer. */
++	hc_intr_mask.d32 = 0;
++	hc_intr_mask.b.chhltd = 1;
++	if (_core_if->dma_enable) {
++		hc_intr_mask.b.ahberr = 1;
++		if (_hc->error_state && !_hc->do_split &&
++		    _hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			hc_intr_mask.b.ack = 1;
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.datatglerr = 1;
++				if (_hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++					hc_intr_mask.b.nak = 1;
++				}
++			}
++		}
++	} else {
++		switch (_hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			} else {
++				hc_intr_mask.b.nak = 1;
++				hc_intr_mask.b.nyet = 1;
++				if (_hc->do_ping) {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (_hc->do_split) {
++				hc_intr_mask.b.nak = 1;
++				if (_hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (_hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			break;
++		case DWC_OTG_EP_TYPE_INTR:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.nak = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			hc_intr_mask.b.frmovrun = 1;
++
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			if (_hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			if (_hc->do_split) {
++				if (_hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++			break;
++		case DWC_OTG_EP_TYPE_ISOC:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.frmovrun = 1;
++			hc_intr_mask.b.ack = 1;
++
++			if (_hc->ep_is_in) {
++				hc_intr_mask.b.xacterr = 1;
++				hc_intr_mask.b.bblerr = 1;
++			}
++			break;
++		}
++	}
++	dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++	/* Enable the top level host channel interrupt. */
++	intr_enable = (1 << hc_num);
++	dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++	/* Make sure host channel interrupts are enabled. */
++	gintmsk.b.hcintr = 1;
++	dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++	
++	/*
++	 * Program the HCCHARn register with the endpoint characteristics for
++	 * the current transfer.
++	 */
++	hcchar.d32 = 0;
++	hcchar.b.devaddr = _hc->dev_addr;
++	hcchar.b.epnum = _hc->ep_num;
++	hcchar.b.epdir = _hc->ep_is_in;
++	hcchar.b.lspddev = (_hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.eptype = _hc->ep_type;
++	hcchar.b.mps = _hc->max_packet;
++
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "  Dev Addr: %d\n", hcchar.b.devaddr);
++	DWC_DEBUGPL(DBG_HCDV, "  Ep Num: %d\n", hcchar.b.epnum);
++	DWC_DEBUGPL(DBG_HCDV, "  Is In: %d\n", hcchar.b.epdir);
++	DWC_DEBUGPL(DBG_HCDV, "  Is Low Speed: %d\n", hcchar.b.lspddev);
++	DWC_DEBUGPL(DBG_HCDV, "  Ep Type: %d\n", hcchar.b.eptype);
++	DWC_DEBUGPL(DBG_HCDV, "  Max Pkt: %d\n", hcchar.b.mps);
++	DWC_DEBUGPL(DBG_HCDV, "  Multi Cnt: %d\n", hcchar.b.multicnt);
++
++	/*
++	 * Program the HCSPLIT register for SPLITs
++	 */
++	hcsplt.d32 = 0;
++	if (_hc->do_split) {
++		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", _hc->hc_num,
++			   _hc->complete_split ? "CSPLIT" : "SSPLIT");
++		hcsplt.b.compsplt = _hc->complete_split;
++		hcsplt.b.xactpos = _hc->xact_pos;
++		hcsplt.b.hubaddr = _hc->hub_addr;
++		hcsplt.b.prtaddr = _hc->port_addr;
++		DWC_DEBUGPL(DBG_HCDV, "   comp split %d\n", _hc->complete_split);
++		DWC_DEBUGPL(DBG_HCDV, "   xact pos %d\n", _hc->xact_pos);
++		DWC_DEBUGPL(DBG_HCDV, "   hub addr %d\n", _hc->hub_addr);
++		DWC_DEBUGPL(DBG_HCDV, "   port addr %d\n", _hc->port_addr);
++		DWC_DEBUGPL(DBG_HCDV, "   is_in %d\n", _hc->ep_is_in);
++		DWC_DEBUGPL(DBG_HCDV, "   Max Pkt: %d\n", hcchar.b.mps);
++		DWC_DEBUGPL(DBG_HCDV, "   xferlen: %d\n", _hc->xfer_len);		
++	}
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param _core_if Controller register interface.
++ * @param _hc Host channel to halt.
++ * @param _halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++		     dwc_hc_t *_hc,
++		     dwc_otg_halt_status_e _halt_status)
++{
++	gnptxsts_data_t 		nptxsts;
++	hptxsts_data_t			hptxsts;
++	hcchar_data_t 			hcchar;
++	dwc_otg_hc_regs_t 		*hc_regs;
++	dwc_otg_core_global_regs_t	*global_regs;
++	dwc_otg_host_global_regs_t	*host_global_regs;
++
++	hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++	global_regs = _core_if->core_global_regs;
++	host_global_regs = _core_if->host_if->host_global_regs;
++
++	WARN_ON(_halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
++
++	if (_halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    _halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Disable all channel interrupts except Ch Halted. The QTD
++		 * and QH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcintmsk_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the QTD and QH state.
++		 */
++		dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		_hc->halt_status = _halt_status;
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0) {
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++
++	if (_hc->halt_pending) {
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++#ifdef DEBUG
++		DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++			  __func__, _hc->hc_num);
++
++/* 		dwc_otg_dump_global_registers(_core_if); */
++/* 		dwc_otg_dump_host_registers(_core_if); */
++#endif		
++		return;
++	}
++
++        hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 1;
++
++	if (!_core_if->dma_enable) {
++		/* Check for space in the request queue to issue the halt. */
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++			if (nptxsts.b.nptxqspcavail == 0) {
++				hcchar.b.chen = 0;
++			}
++		} else {
++			hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
++			if ((hptxsts.b.ptxqspcavail == 0) || (_core_if->queuing_high_bandwidth)) {
++				hcchar.b.chen = 0;
++			}
++		}
++	}
++
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	_hc->halt_status = _halt_status;
++
++	if (hcchar.b.chen) {
++		_hc->halt_pending = 1;
++		_hc->halt_on_queue = 0;
++	} else {
++		_hc->halt_on_queue = 1;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "  hcchar: 0x%08x\n", hcchar.d32);
++	DWC_DEBUGPL(DBG_HCDV, "  halt_pending: %d\n", _hc->halt_pending);
++	DWC_DEBUGPL(DBG_HCDV, "  halt_on_queue: %d\n", _hc->halt_on_queue);
++	DWC_DEBUGPL(DBG_HCDV, "  halt_status: %d\n", _hc->halt_status);
++
++	return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	dwc_otg_hc_regs_t *hc_regs;
++
++	_hc->xfer_started = 0;
++
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++	dwc_write_reg32(&hc_regs->hcintmsk, 0);
++	dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
++
++#ifdef DEBUG
++	del_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
++	{
++		hcchar_data_t hcchar;
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chdis) {
++			DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++				 __func__, _hc->hc_num, hcchar.d32);
++		}
++	}
++#endif	
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Identifies the host channel to set up and its properties.
++ * @param _hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *_core_if,
++					 dwc_hc_t *_hc,
++					 hcchar_data_t *_hcchar)
++{
++	if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		hfnum_data_t	hfnum;
++		hfnum.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hfnum);
++		/* 1 if _next_ frame is odd, 0 if it's even */
++		_hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR && _hc->do_split && !_hc->complete_split) {
++			switch (hfnum.b.frnum & 0x7) {
++			case 7:
++				_core_if->hfnum_7_samples++;
++				_core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++				break;
++			case 0:
++				_core_if->hfnum_0_samples++;
++				_core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++				break;
++			default:
++				_core_if->hfnum_other_samples++;
++				_core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
++				break;
++			}
++		}
++#endif		
++	}
++}
++
++#ifdef DEBUG
++static void hc_xfer_timeout(unsigned long _ptr)
++{
++	hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
++	int hc_num = xfer_info->hc->hc_num;
++	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++	DWC_WARN("  start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++/*
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	uint16_t num_packets;
++	uint32_t max_hc_xfer_size = _core_if->core_params->max_transfer_size;
++	uint16_t max_hc_pkt_count = _core_if->core_params->max_packet_count;
++	dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++	hctsiz.d32 = 0;
++
++	if (_hc->do_ping) {
++		if (!_core_if->dma_enable) {
++			dwc_otg_hc_do_ping(_core_if, _hc);
++			_hc->xfer_started = 1;
++			return;
++		} else {
++			hctsiz.b.dopng = 1;
++		}
++	}
++
++	if (_hc->do_split) {
++		num_packets = 1;
++
++		if (_hc->complete_split && !_hc->ep_is_in) {
++			/* For CSPLIT OUT Transfer, set the size to 0 so the
++			 * core doesn't expect any data written to the FIFO */
++			_hc->xfer_len = 0;
++		} else if (_hc->ep_is_in || (_hc->xfer_len > _hc->max_packet)) {
++			_hc->xfer_len = _hc->max_packet;
++		} else if (!_hc->ep_is_in && (_hc->xfer_len > 188)) {
++			_hc->xfer_len = 188;
++		}
++
++		hctsiz.b.xfersize = _hc->xfer_len;
++	} else {
++		/*
++		 * Ensure that the transfer length and packet count will fit
++		 * in the widths allocated for them in the HCTSIZn register.
++		 */
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure the transfer size is no larger than one
++			 * (micro)frame's worth of data. (A check was done
++			 * when the periodic transfer was accepted to ensure
++			 * that a (micro)frame's worth of data can be
++			 * programmed into a channel.)
++			 */
++			uint32_t max_periodic_len = _hc->multi_count * _hc->max_packet;
++			if (_hc->xfer_len > max_periodic_len) {
++				_hc->xfer_len = max_periodic_len;
++			} else {
++			}
++		} else if (_hc->xfer_len > max_hc_xfer_size) {
++			/* Make sure that xfer_len is a multiple of max packet size. */
++			_hc->xfer_len = max_hc_xfer_size - _hc->max_packet + 1;
++		}
++
++		if (_hc->xfer_len > 0) {
++			num_packets = (_hc->xfer_len + _hc->max_packet - 1) / _hc->max_packet;
++			if (num_packets > max_hc_pkt_count) {
++				num_packets = max_hc_pkt_count;
++				_hc->xfer_len = num_packets * _hc->max_packet;
++			}
++		} else {
++			/* Need 1 packet for transfer length of 0. */
++			num_packets = 1;
++		}
++
++		if (_hc->ep_is_in) {
++			/* Always program an integral # of max packets for IN transfers. */
++			_hc->xfer_len = num_packets * _hc->max_packet;
++		}
++
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure that the multi_count field matches the
++			 * actual transfer length.
++			 */
++			_hc->multi_count = num_packets;
++
++		}
++
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/* Set up the initial PID for the transfer. */
++			if (_hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++				if (_hc->ep_is_in) {
++					if (_hc->multi_count == 1) {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					} else if (_hc->multi_count == 2) {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++					} else {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++					}
++				} else {
++					if (_hc->multi_count == 1) {
++						_hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					} else {
++						_hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++					}
++				}
++			} else {
++				_hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			}
++		}
++
++		hctsiz.b.xfersize = _hc->xfer_len;
++	}
++
++	_hc->start_pkt_count = num_packets;
++	hctsiz.b.pktcnt = num_packets;
++	hctsiz.b.pid = _hc->data_pid_start;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "  Xfer Size: %d\n", hctsiz.b.xfersize);
++	DWC_DEBUGPL(DBG_HCDV, "  Num Pkts: %d\n", hctsiz.b.pktcnt);
++	DWC_DEBUGPL(DBG_HCDV, "  Start PID: %d\n", hctsiz.b.pid);
++
++	if (_core_if->dma_enable) {
++#ifdef DEBUG
++if(((uint32_t)_hc->xfer_buff)%4)
++printk("dwc_otg_hc_start_transfer _hc->xfer_buff not 4 byte alignment\n");
++#endif
++		dwc_write_reg32(&hc_regs->hcdma, (uint32_t)_hc->xfer_buff);
++	}
++
++	/* Start the split */
++	if (_hc->do_split) {
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
++	}
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.multicnt = _hc->multi_count;
++	hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++#ifdef DEBUG
++	_core_if->start_hcchar_val[_hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, _hc->hc_num, hcchar.d32);
++	}
++#endif	
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	_hc->xfer_started = 1;
++	_hc->requests++;
++
++	if (!_core_if->dma_enable && !_hc->ep_is_in && _hc->xfer_len > 0) {
++		/* Load OUT packet into the appropriate Tx FIFO. */
++		dwc_otg_hc_write_packet(_core_if, _hc);
++	}
++
++#ifdef DEBUG
++	/* Start a timer for this transfer. */
++	_core_if->hc_xfer_timer[_hc->hc_num].function = hc_xfer_timeout;
++	_core_if->hc_xfer_info[_hc->hc_num].core_if = _core_if;
++	_core_if->hc_xfer_info[_hc->hc_num].hc = _hc;
++	_core_if->hc_xfer_timer[_hc->hc_num].data = (unsigned long)(&_core_if->hc_xfer_info[_hc->hc_num]);
++	_core_if->hc_xfer_timer[_hc->hc_num].expires = jiffies + (HZ*10);
++	add_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
++#endif
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++
++	if (_hc->do_split) {
++		/* SPLITs always queue just once per channel */
++		return 0;
++	} else if (_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		/* SETUPs are queued only once since they can't be NAKed. */
++		return 0;
++	} else if (_hc->ep_is_in) {
++		/*
++		 * Always queue another request for other IN transfers. If
++		 * back-to-back INs are issued and NAKs are received for both,
++		 * the driver may still be processing the first NAK when the
++		 * second NAK is received. When the interrupt handler clears
++		 * the NAK interrupt for the first NAK, the second NAK will
++		 * not be seen. So we can't depend on the NAK interrupt
++		 * handler to requeue a NAKed request. Instead, IN requests
++		 * are issued each time this function is called. When the
++		 * transfer completes, the extra requests for the channel will
++		 * be flushed.
++		 */
++		hcchar_data_t hcchar;
++		dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 0;
++		DWC_DEBUGPL(DBG_HCDV, "  IN xfer: hcchar = 0x%08x\n", hcchar.d32);
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		_hc->requests++;
++		return 1;
++	} else {
++		/* OUT transfers. */
++		if (_hc->xfer_count < _hc->xfer_len) {
++			if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				hcchar_data_t hcchar;
++				dwc_otg_hc_regs_t *hc_regs;
++				hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++			}
++
++			/* Load OUT packet into the appropriate Tx FIFO. */
++			dwc_otg_hc_write_packet(_core_if, _hc);
++			_hc->requests++;
++			return 1;
++		} else {
++			return 0;
++		}
++	}
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++
++	hctsiz.d32 = 0;
++	hctsiz.b.dopng = 1;
++	hctsiz.b.pktcnt = 1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	uint32_t i;
++	uint32_t remaining_count;
++	uint32_t byte_count;
++	uint32_t dword_count;
++
++	uint32_t *data_buff = (uint32_t *)(_hc->xfer_buff);
++	uint32_t *data_fifo = _core_if->data_fifo[_hc->hc_num];
++
++	remaining_count = _hc->xfer_len - _hc->xfer_count;
++	if (remaining_count > _hc->max_packet) {
++		byte_count = _hc->max_packet;
++	} else {
++		byte_count = remaining_count;
++	}
++
++	dword_count = (byte_count + 3) / 4;
++
++	if ((((unsigned long)data_buff) & 0x3) == 0) {
++		/* xfer_buff is DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			dwc_write_reg32(data_fifo, *data_buff);
++		}
++	} else {
++		/* xfer_buff is not DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			dwc_write_reg32(data_fifo, get_unaligned(data_buff));
++		}
++	}
++
++	_hc->xfer_count += byte_count;
++	_hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last 
++ * SOF packet.  
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dsts);
++
++	/* read current frame/microfreme number from DSTS register */
++	return dsts.b.soffn;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination 
++ * buffer.  This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t *_core_if, uint32_t *_dest)
++{
++	/* Get the 8 bytes of a setup transaction data */
++
++	/* Pop 2 DWORDS off the receive data FIFO into memory */
++	_dest[0] = dwc_read_reg32(_core_if->data_fifo[0]);
++	_dest[1] = dwc_read_reg32(_core_if->data_fifo[0]);
++    //_dest[0] = dwc_read_datafifo32(_core_if->data_fifo[0]);
++	//_dest[1] = dwc_read_datafifo32(_core_if->data_fifo[0]);
++}
++
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0 
++ * IN for transmitting packets.  It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	dsts_data_t dsts;
++	depctl_data_t diepctl;
++	depctl_data_t doepctl;
++	dctl_data_t dctl ={.d32=0};        
++
++	/* Read the Device Status and Endpoint 0 Control registers */
++	dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
++	diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
++	doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
++
++	/* Set the MPS of the IN EP based on the enumeration speed */
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++		break;
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++		break;
++	}
++
++	dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++	/* Enable OUT EP for receive */
++	doepctl.b.epena = 1;
++	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++        DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n", 
++                    dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++        DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n", 
++                    dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));        
++#endif
++        dctl.b.cgnpinnak = 1;
++        dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++        DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n", 
++                    dwc_read_reg32(&dev_if->dev_global_regs->dctl));
++}
++
++/**
++ * This function activates an EP.  The Device EP control register for
++ * the EP is configured as defined in the ep structure.  Note: This
++ * function is not used for EP0.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	depctl_data_t depctl;
++	volatile uint32_t *addr;
++        daint_data_t daintmsk = {.d32=0};
++
++        DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, _ep->num, 
++                    (_ep->is_in?"IN":"OUT"));
++        
++	/* Read DEPCTLn register */
++	if (_ep->is_in == 1) {
++		addr = &dev_if->in_ep_regs[_ep->num]->diepctl;
++                daintmsk.ep.in = 1<<_ep->num;
++        } else {
++		addr = &dev_if->out_ep_regs[_ep->num]->doepctl;
++                daintmsk.ep.out = 1<<_ep->num;
++	}
++        
++        /* If the EP is already active don't change the EP Control
++         * register. */
++        depctl.d32 = dwc_read_reg32(addr);
++	if (!depctl.b.usbactep) {
++                depctl.b.mps = _ep->maxpacket;
++                depctl.b.eptype = _ep->type;
++                depctl.b.txfnum = _ep->tx_fifo_num;
++                
++                if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			depctl.b.setd0pid = 1;	// ???
++                } else {
++                        depctl.b.setd0pid = 1;
++                }
++                depctl.b.usbactep = 1;
++
++                dwc_write_reg32(addr, depctl.d32);
++                DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
++        }
++        
++
++        /* Enable the Interrupt for this EP */
++        dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
++                         0, daintmsk.d32);
++        DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n", 
++                    dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
++	_ep->stall_clear_flag = 0;
++	return;
++}
++
++/**
++ * This function deactivates an EP.  This is done by clearing the USB Active 
++ * EP bit in the Device EP control register.  Note: This function is not used 
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl ={.d32 = 0};
++	volatile uint32_t *addr;
++        daint_data_t daintmsk = {.d32=0};
++        
++	/* Read DEPCTLn register */
++	if (_ep->is_in == 1) {
++		addr = &_core_if->dev_if->in_ep_regs[_ep->num]->diepctl;
++                daintmsk.ep.in = 1<<_ep->num;
++	} else {
++		addr = &_core_if->dev_if->out_ep_regs[_ep->num]->doepctl;
++                daintmsk.ep.out = 1<<_ep->num;
++	}
++
++	depctl.b.usbactep = 0;
++	dwc_write_reg32(addr, depctl.d32);
++
++        /* Disable the Interrupt for this EP */
++        dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->daintmsk,
++                         daintmsk.d32, 0);
++
++	return;
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.  For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to start the transfer on.
++ */
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++        /** @todo Refactor this funciton to check the transfer size
++         * count value does not execed the number bits in the Transfer
++         * count register. */
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++#ifdef CHECK_PACKET_COUNTER_WIDTH
++        const uint32_t MAX_XFER_SIZE = 
++                _core_if->core_params->max_transfer_size;
++        const uint32_t MAX_PKT_COUNT = 
++                _core_if->core_params->max_packet_count;
++        uint32_t num_packets;
++        uint32_t transfer_len;
++        dwc_otg_dev_out_ep_regs_t *out_regs = 
++                _core_if->dev_if->out_ep_regs[_ep->num];
++        dwc_otg_dev_in_ep_regs_t *in_regs = 
++                _core_if->dev_if->in_ep_regs[_ep->num];
++        gnptxsts_data_t txstatus;
++
++        int lvl = SET_DEBUG_LEVEL(DBG_PCD);
++
++        
++        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++                    "xfer_buff=%p start_xfer_buff=%p\n",
++                    _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, 
++                    _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
++
++        transfer_len = _ep->xfer_len - _ep->xfer_count;
++        if (transfer_len > MAX_XFER_SIZE) {
++                transfer_len = MAX_XFER_SIZE;
++        }
++        if (transfer_len == 0) {
++                num_packets = 1;
++                /* OUT EP to recieve Zero-length packet set transfer
++                 * size to maxpacket size. */
++                if (!_ep->is_in) {
++                        transfer_len = _ep->maxpacket;                
++                }
++        } else {
++                num_packets = 
++                        (transfer_len + _ep->maxpacket - 1) / _ep->maxpacket;
++                if (num_packets > MAX_PKT_COUNT) {
++                        num_packets = MAX_PKT_COUNT;
++                }
++        }
++        DWC_DEBUGPL(DBG_PCD, "transfer_len=%d #pckt=%d\n", transfer_len, 
++                    num_packets);
++
++        deptsiz.b.xfersize = transfer_len;
++        deptsiz.b.pktcnt = num_packets;
++
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++        } else {/* OUT endpoint */
++                depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++        }
++        
++        /* EP enable, IN data in FIFO */
++        depctl.b.cnak = 1;
++        depctl.b.epena = 1;
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++                txstatus.d32 = 
++                        dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++                if (txstatus.b.nptxqspcavail == 0) {
++                        DWC_DEBUGPL(DBG_ANY, "TX Queue Full (0x%0x)\n", 
++                                    txstatus.d32);
++                        return;
++                }
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++                /** 
++                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++                 * data will be written into the fifo by the ISR.
++                 */ 
++                if (_core_if->dma_enable) {
++			dwc_write_reg32(&in_regs->diepdma, (uint32_t) _ep->xfer_buff);
++		} else {
++			if (_core_if->en_multiple_tx_fifo == 0) {
++                        intr_mask.b.nptxfempty = 1;
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
++                                          intr_mask.d32, 0);
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++                                          intr_mask.d32, intr_mask.d32);
++			} else {
++			    /* Enable the Tx FIFO Empty Interrupt for this EP */
++			    if (_ep->xfer_len > 0 &&
++					 _ep->type != DWC_OTG_EP_TYPE_ISOC) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk = (0x1 << _ep->num);
++					dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
++							dtknqr4_fifoemptymsk,0, fifoemptymsk);
++                }
++			}
++		}
++	} else {	    /* OUT endpoint */
++		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++                if (_core_if->dma_enable) {
++			dwc_write_reg32(&out_regs->doepdma,(uint32_t) _ep->xfer_buff);
++		}
++        }
++        DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", 
++                    dwc_read_reg32(&out_regs->doepctl),
++                    dwc_read_reg32(&out_regs->doeptsiz));
++        DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", 
++                    dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
++                    dwc_read_reg32(&_core_if->core_global_regs->gintmsk));        
++
++        SET_DEBUG_LEVEL(lvl);
++#endif
++        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++        
++        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++                    "xfer_buff=%p start_xfer_buff=%p\n",
++                    _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, 
++                    _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
++
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num];
++		gnptxsts_data_t gtxstatus;
++		gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++		if (_core_if->en_multiple_tx_fifo == 0 &&
++			gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++                        DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++                        //return;
++                        MDELAY(100); //james
++                }
++                
++		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++                /* Zero Length Packet? */
++                if (_ep->xfer_len == 0) {
++                        deptsiz.b.xfersize = 0;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++                        
++                        /* Program the transfer size and packet count
++                         *  as follows: xfersize = N * maxpacket +
++                         *  short_packet pktcnt = N + (short_packet
++                         *  exist ? 1 : 0)  
++                         */
++                        deptsiz.b.xfersize = _ep->xfer_len;
++			deptsiz.b.pktcnt = (_ep->xfer_len - 1 + _ep->maxpacket) / _ep->maxpacket;
++		}
++
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (_core_if->dma_enable) {
++#if 1 // winder
++			dma_cache_wback_inv((unsigned long) _ep->xfer_buff, _ep->xfer_len); // winder
++			dwc_write_reg32 (&(in_regs->diepdma), 
++					 CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
++#else
++                        dwc_write_reg32 (&(in_regs->diepdma),
++				         (uint32_t)_ep->dma_addr);
++#endif
++		} else {
++			if (_ep->type != DWC_OTG_EP_TYPE_ISOC) {
++			/** 
++			 * Enable the Non-Periodic Tx FIFO empty interrupt,
++				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++			 * the data will be written into the fifo by the ISR.
++			 */ 
++			    if (_core_if->en_multiple_tx_fifo == 0) {
++                        intr_mask.b.nptxfempty = 1;
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
++                                          intr_mask.d32, 0);
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++                                          intr_mask.d32, intr_mask.d32);
++				} else {
++				    /* Enable the Tx FIFO Empty Interrupt for this EP */
++				    if (_ep->xfer_len > 0) {
++						uint32_t fifoemptymsk = 0;
++						fifoemptymsk = 1 << _ep->num;
++						dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
++								  dtknqr4_fifoemptymsk,0,fifoemptymsk);
++					}
++				}
++			}
++                }
++                
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		if (_core_if->dma_enable) {
++		depctl.d32 = dwc_read_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl);
++		depctl.b.nextep = _ep->num;
++		dwc_write_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++		}
++	} else {
++                /* OUT endpoint */
++	    dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++		/* Program the transfer size and packet count as follows:
++                 * 
++		 *  pktcnt = N                                         
++		 *  xfersize = N * maxpacket
++                 */
++                if (_ep->xfer_len == 0) {
++                        /* Zero Length Packet */
++                        deptsiz.b.xfersize = _ep->maxpacket;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++			deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
++                        deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
++                }
++		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++                DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++			      _ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (_core_if->dma_enable) {
++#if 1 // winder
++			dwc_write_reg32 (&(out_regs->doepdma), 
++					 CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
++#else
++			dwc_write_reg32 (&(out_regs->doepdma), 
++					 (uint32_t)_ep->dma_addr);
++#endif
++		}
++
++		if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++                        /** @todo NGS: dpid is read-only. Use setd0pid
++                         * or setd1pid. */
++			if (_ep->even_odd_frame) {
++				depctl.b.setd1pid = 1;
++			} else {
++				depctl.b.setd0pid = 1;
++			}
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++                DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", 
++                            dwc_read_reg32(&out_regs->doepctl),
++                            dwc_read_reg32(&out_regs->doeptsiz));
++                DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", 
++                            dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
++                            dwc_read_reg32(&_core_if->core_global_regs->gintmsk));        
++	}
++}
++
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer.  For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	volatile depctl_data_t depctl;
++	volatile deptsiz0_data_t deptsiz;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++        DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++                    "xfer_buff=%p start_xfer_buff=%p total_len=%d\n",
++                    _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, 
++                    _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff,
++                    _ep->total_len);
++        _ep->total_len = _ep->xfer_len;
++
++	/* IN endpoint */
++	if (_ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0];
++		gnptxsts_data_t gtxstatus;
++		gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++		if (_core_if->en_multiple_tx_fifo == 0 &&
++			gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++                        deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++                        DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n", 
++                                    dwc_read_reg32(&in_regs->diepctl));
++                        DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", 
++				     deptsiz.d32, deptsiz.b.xfersize,deptsiz.b.pktcnt);
++			DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", gtxstatus.d32);
++#endif	/*  */
++                        			printk("TX Queue or FIFO Full!!!!\n"); // test-only
++                        //return;
++                        MDELAY(100); //james
++                }
++
++                depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++                /* Zero Length Packet? */
++                if (_ep->xfer_len == 0) {
++                        deptsiz.b.xfersize = 0;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++                        /* Program the transfer size and packet count
++                         *  as follows: xfersize = N * maxpacket +
++                         *  short_packet pktcnt = N + (short_packet
++                         *  exist ? 1 : 0)  
++                         */
++			if (_ep->xfer_len > _ep->maxpacket) {
++				_ep->xfer_len = _ep->maxpacket;
++				deptsiz.b.xfersize = _ep->maxpacket;
++			}
++			else {
++				deptsiz.b.xfersize = _ep->xfer_len;
++			}
++                        deptsiz.b.pktcnt = 1;
++
++		}
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++                DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			     _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (_core_if->dma_enable) {
++			dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr);
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++                /** 
++                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++                 * data will be written into the fifo by the ISR.
++                 */ 
++                if (!_core_if->dma_enable) {
++			if (_core_if->en_multiple_tx_fifo == 0) {
++                        intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&_core_if->core_global_regs->gintsts, intr_mask.d32, 0);
++				dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, intr_mask.d32,
++						  intr_mask.d32);
++			} else {
++			    /* Enable the Tx FIFO Empty Interrupt for this EP */
++			    if (_ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << _ep->num;
++					dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						 0, fifoemptymsk);
++                }
++                
++			}
++		}
++	} else {
++	    /* OUT endpoint */
++	    dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
++
++		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count as follows:
++		 *  xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++		 *  pktcnt = N                                          */
++                if (_ep->xfer_len == 0) {
++                        /* Zero Length Packet */
++                        deptsiz.b.xfersize = _ep->maxpacket;
++                        deptsiz.b.pktcnt = 1;
++                } else {
++			deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
++                        deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
++                }
++                
++		dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++                DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
++			     _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt);
++
++		if (_core_if->dma_enable) {
++			dwc_write_reg32(&(out_regs->doepdma), (uint32_t) _ep->dma_addr);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
++	}
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++	if (_ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs = 
++			_core_if->dev_if->in_ep_regs[0];
++                gnptxsts_data_t tx_status = {.d32 = 0};
++
++                tx_status.d32 = dwc_read_reg32( &_core_if->core_global_regs->gnptxsts );
++                /** @todo Should there be check for room in the Tx
++                 * Status Queue.  If not remove the code above this comment. */
++
++                depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++                /* Program the transfer size and packet count
++                 *  as follows: xfersize = N * maxpacket +
++                 *  short_packet pktcnt = N + (short_packet
++                 *  exist ? 1 : 0)  
++                 */
++                deptsiz.b.xfersize = (_ep->total_len - _ep->xfer_count) > _ep->maxpacket ? _ep->maxpacket : 
++                        (_ep->total_len - _ep->xfer_count);
++                deptsiz.b.pktcnt = 1;
++		_ep->xfer_len += deptsiz.b.xfersize;
++
++                dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++                DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++                            _ep->xfer_len, 
++                            deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (_core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			dwc_write_reg32 (&(in_regs->diepdma), 
++					 CPHYSADDR((uint32_t)_ep->dma_addr)); // winder
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++                /** 
++                 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++                 * data will be written into the fifo by the ISR.
++                 */ 
++                if (!_core_if->dma_enable) {
++                        /* First clear it from GINTSTS */
++                        intr_mask.b.nptxfempty = 1;
++                        dwc_write_reg32( &_core_if->core_global_regs->gintsts,
++                                         intr_mask.d32 );
++
++                        dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++                                          intr_mask.d32, intr_mask.d32);
++                }
++                
++	} 
++
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 *buf, unsigned int length)
++{
++	unsigned int	start, num, i;
++	char		line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0) {
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			sprintf(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_PRINT( "%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 *buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP.  For non-periodic EPs the non-periodic Tx FIFO is written.  For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to write packet for.
++ * @param _dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma)
++{
++	/**
++	 * The buffer is padded to DWORD on a per packet basis in
++	 * slave/dma mode if the MPS is not DWORD aligned.  The last
++	 * packet, if short, is also padded to a multiple of DWORD.
++	 *
++	 * ep->xfer_buff always starts DWORD aligned in memory and is a 
++	 * multiple of DWORD in length
++	 *
++	 * ep->xfer_len can be any number of bytes
++	 *
++	 * ep->xfer_count is a multiple of ep->maxpacket until the last 
++	 *  packet
++	 *
++	 * FIFO access is DWORD */
++
++	uint32_t i;
++	uint32_t byte_count;
++	uint32_t dword_count;
++	uint32_t *fifo;
++        uint32_t *data_buff = (uint32_t *)_ep->xfer_buff;
++        
++        //DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, _core_if, _ep);
++        if (_ep->xfer_count >= _ep->xfer_len) {
++                DWC_WARN("%s() No data for EP%d!!!\n", __func__, _ep->num);
++                return;                
++        }
++
++	/* Find the byte length of the packet either short packet or MPS */
++	if ((_ep->xfer_len - _ep->xfer_count) < _ep->maxpacket) {
++		byte_count = _ep->xfer_len - _ep->xfer_count;
++	}
++	else {
++		byte_count = _ep->maxpacket;
++	}
++
++	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
++	 * is not a multiple of DWORD */
++	dword_count =  (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++        dump_msg(_ep->xfer_buff, byte_count);        
++#endif
++        if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++                /**@todo NGS Where are the Periodic Tx FIFO addresses
++                 * intialized?  What should this be? */
++                fifo = _core_if->data_fifo[_ep->tx_fifo_num];
++        } else {
++                fifo = _core_if->data_fifo[_ep->num];
++        }
++        
++        DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
++                    fifo, data_buff, *data_buff, byte_count);
++        
++
++	if (!_dma) {
++		for (i=0; i<dword_count; i++, data_buff++) {
++			dwc_write_reg32( fifo, *data_buff );
++		}
++	}
++
++	_ep->xfer_count += byte_count;
++        _ep->xfer_buff += byte_count;
++#if 1 // winder, why do we need this??
++	_ep->dma_addr += byte_count;
++#endif
++}
++
++/** 
++ * Set the EP STALL.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++        DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, 
++	          (_ep->is_in?"IN":"OUT"));
++
++	if (_ep->is_in == 1) {
++		depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the disable and stall bits */
++		if (depctl.b.epena) {
++                        depctl.b.epdis = 1;
++                }
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++
++	} else {
++		depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the stall bit */
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++	}
++        DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++	return;
++}
++
++/** 
++ * Clear the EP STALL.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++        DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, 
++                    (_ep->is_in?"IN":"OUT"));
++
++	if (_ep->is_in == 1) {
++		depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
++	} else {
++		depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
++	}
++
++	depctl.d32 = dwc_read_reg32(depctl_addr);
++
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++        /* 
++         * USB Spec 9.4.5: For endpoints using data toggle, regardless
++         * of whether an endpoint has the Halt feature set, a
++         * ClearFeature(ENDPOINT_HALT) request always results in the
++         * data toggle being reinitialized to DATA0.
++         */
++        if (_ep->type == DWC_OTG_EP_TYPE_INTR || 
++            _ep->type == DWC_OTG_EP_TYPE_BULK) {
++                depctl.b.setd0pid = 1; /* DATA0 */
++        }
++        
++	dwc_write_reg32(depctl_addr, depctl.d32);
++        DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++	return;
++}
++
++/** 
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer.  To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _dest   Destination buffer for the packet.
++ * @param _bytes  Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t *_core_if,
++			 uint8_t *_dest, 
++			 uint16_t _bytes)
++{
++	int i;
++	int word_count = (_bytes + 3) / 4;
++
++	volatile uint32_t *fifo = _core_if->data_fifo[0];
++	uint32_t *data_buff = (uint32_t *)_dest;
++
++	/**
++	 * @todo Account for the case where _dest is not dword aligned. This
++	 * requires reading data from the FIFO into a uint32_t temp buffer,
++	 * then moving it into the data buffer.
++	 */
++
++        DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, 
++                    _core_if, _dest, _bytes);
++
++	for (i=0; i<word_count; i++, data_buff++) {
++		*data_buff = dwc_read_reg32(fifo);
++	}
++
++	return;
++}
++
++
++#ifdef DEBUG
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Device Global Registers\n");
++	addr=&_core_if->dev_if->dev_global_regs->dcfg;
++	DWC_PRINT("DCFG      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->dctl;
++	DWC_PRINT("DCTL      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->dsts;
++	DWC_PRINT("DSTS      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->diepmsk;
++	DWC_PRINT("DIEPMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->doepmsk;
++	DWC_PRINT("DOEPMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->daint;
++	DWC_PRINT("DAINT     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->dev_if->dev_global_regs->dtknqr1;
++	DWC_PRINT("DTKNQR1   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++        if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
++                addr=&_core_if->dev_if->dev_global_regs->dtknqr2;
++                DWC_PRINT("DTKNQR2   @0x%08X : 0x%08X\n",
++                          (uint32_t)addr,dwc_read_reg32(addr));
++        }
++        
++	addr=&_core_if->dev_if->dev_global_regs->dvbusdis;
++	DWC_PRINT("DVBUSID   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	addr=&_core_if->dev_if->dev_global_regs->dvbuspulse;
++	DWC_PRINT("DVBUSPULSE   @0x%08X : 0x%08X\n",
++                  (uint32_t)addr,dwc_read_reg32(addr));
++
++        if (_core_if->hwcfg2.b.dev_token_q_depth > 14) {
++		addr = &_core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++                DWC_PRINT("DTKNQR3   @0x%08X : 0x%08X\n",
++                          (uint32_t)addr, dwc_read_reg32(addr));
++        }
++
++        if (_core_if->hwcfg2.b.dev_token_q_depth > 22) {
++		addr = &_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++		DWC_PRINT("DTKNQR4	 @0x%08X : 0x%08X\n", (uint32_t) addr,
++			   dwc_read_reg32(addr));
++	}
++	for (i = 0; i <= _core_if->dev_if->num_in_eps; i++) {
++		DWC_PRINT("Device IN EP %d Registers\n", i);
++		addr=&_core_if->dev_if->in_ep_regs[i]->diepctl;
++		DWC_PRINT("DIEPCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->in_ep_regs[i]->diepint;
++		DWC_PRINT("DIEPINT   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->in_ep_regs[i]->dieptsiz;
++		DWC_PRINT("DIETSIZ   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->in_ep_regs[i]->diepdma;
++		DWC_PRINT("DIEPDMA   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		
++addr = &_core_if->dev_if->in_ep_regs[i]->dtxfsts;
++		DWC_PRINT("DTXFSTS	 @0x%08X : 0x%08X\n", (uint32_t) addr,
++			   dwc_read_reg32(addr));
++	}
++	for (i = 0; i <= _core_if->dev_if->num_out_eps; i++) {
++		DWC_PRINT("Device OUT EP %d Registers\n", i);
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepctl;
++		DWC_PRINT("DOEPCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepfn;
++		DWC_PRINT("DOEPFN    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepint;
++		DWC_PRINT("DOEPINT   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doeptsiz;
++		DWC_PRINT("DOETSIZ   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->dev_if->out_ep_regs[i]->doepdma;
++		DWC_PRINT("DOEPDMA   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	}
++	return;
++}
++
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Host Global Registers\n");
++	addr=&_core_if->host_if->host_global_regs->hcfg;
++	DWC_PRINT("HCFG      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->hfir;
++	DWC_PRINT("HFIR      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->hfnum;
++	DWC_PRINT("HFNUM     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->hptxsts;
++	DWC_PRINT("HPTXSTS   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->haint;
++	DWC_PRINT("HAINT     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->host_if->host_global_regs->haintmsk;
++	DWC_PRINT("HAINTMSK  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=_core_if->host_if->hprt0;
++	DWC_PRINT("HPRT0     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	for (i=0; i<_core_if->core_params->host_channels; i++) {
++		DWC_PRINT("Host Channel %d Specific Registers\n", i);
++		addr=&_core_if->host_if->hc_regs[i]->hcchar;
++		DWC_PRINT("HCCHAR    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcsplt;
++		DWC_PRINT("HCSPLT    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcint;
++		DWC_PRINT("HCINT     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcintmsk;
++		DWC_PRINT("HCINTMSK  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hctsiz;
++		DWC_PRINT("HCTSIZ    @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&_core_if->host_if->hc_regs[i]->hcdma;
++		DWC_PRINT("HCDMA     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	}
++	return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Core Global Registers\n");
++	addr=&_core_if->core_global_regs->gotgctl;
++	DWC_PRINT("GOTGCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gotgint;
++	DWC_PRINT("GOTGINT   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gahbcfg;
++	DWC_PRINT("GAHBCFG   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gusbcfg;
++	DWC_PRINT("GUSBCFG   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->grstctl;
++	DWC_PRINT("GRSTCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gintsts;
++	DWC_PRINT("GINTSTS   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gintmsk;
++	DWC_PRINT("GINTMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->grxstsr;
++	DWC_PRINT("GRXSTSR   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	//addr=&_core_if->core_global_regs->grxstsp;
++	//DWC_PRINT("GRXSTSP   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->grxfsiz;
++	DWC_PRINT("GRXFSIZ   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gnptxfsiz;
++	DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gnptxsts;
++	DWC_PRINT("GNPTXSTS  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gi2cctl;
++	DWC_PRINT("GI2CCTL   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gpvndctl;
++	DWC_PRINT("GPVNDCTL  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ggpio;
++	DWC_PRINT("GGPIO     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->guid;
++	DWC_PRINT("GUID      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->gsnpsid;
++	DWC_PRINT("GSNPSID   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg1;
++	DWC_PRINT("GHWCFG1   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg2;
++	DWC_PRINT("GHWCFG2   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg3;
++	DWC_PRINT("GHWCFG3   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->ghwcfg4;
++	DWC_PRINT("GHWCFG4   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&_core_if->core_global_regs->hptxfsiz;
++	DWC_PRINT("HPTXFSIZ  @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++        for (i=0; i<_core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++		addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
++		DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
++	}
++
++}
++#endif
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _num Tx FIFO to flush.
++ */
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, 
++                                   const int _num ) 
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++        volatile grstctl_t greset = { .d32 = 0};
++        int count = 0;
++        
++        DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
++
++        greset.b.txfflsh = 1;
++        greset.b.txfnum = _num;
++        dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++        
++        do {
++                greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++                if (++count > 10000){
++                        DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++                                  __func__, greset.d32,
++                                  dwc_read_reg32( &global_regs->gnptxsts));
++                        break;
++                }
++
++		udelay(1);
++        } while (greset.b.txfflsh == 1);
++        /* Wait for 3 PHY Clocks*/
++        UDELAY(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if ) 
++{
++        dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++        volatile grstctl_t greset = { .d32 = 0};
++        int count = 0;
++        
++        DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++        /*
++         * 
++         */
++        greset.b.rxfflsh = 1;
++        dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++        
++        do {
++                greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++                if (++count > 10000){
++                        DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, 
++                                 greset.d32);
++                        break;
++                }
++        } while (greset.b.rxfflsh == 1);        
++        /* Wait for 3 PHY Clocks*/
++        UDELAY(1);
++}
++
++/**
++ * Do core a soft reset of the core.  Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++
++void dwc_otg_core_reset(dwc_otg_core_if_t *_core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do {
++		UDELAY(10);
++		greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++		if (++count > 100000){
++			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__, 
++			greset.d32, greset.b.ahbidle);
++			return;
++		}
++	} while (greset.b.ahbidle == 0);
++        
++// winder add.
++#if 1
++	/* Note: Actually, I don't exactly why we need to put delay here. */
++	MDELAY(100);
++#endif
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++// winder add.
++#if 1
++	/* Note: Actually, I don't exactly why we need to put delay here. */
++	MDELAY(100);
++#endif
++	do {
++		greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++		if (++count > 10000){
++			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, 
++				greset.d32);
++			break;
++		}
++		udelay(1);
++	} while (greset.b.csftrst == 1);        
++	/* Wait for 3 PHY Clocks*/
++	//DWC_PRINT("100ms\n");
++	MDELAY(100);
++}
++
++
++
++/**
++ * Register HCD callbacks.  The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _cb the HCD callback structure.
++ * @param _p pointer to be passed to callback function (usb_hcd*).
++ */
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p)
++{
++        _core_if->hcd_cb = _cb;        
++        _cb->p = _p;        
++}
++
++/**
++ * Register PCD callbacks.  The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _cb the PCD callback structure.
++ * @param _p pointer to be passed to callback function (pcd*).
++ */
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p)
++{
++        _core_if->pcd_cb = _cb;
++        _cb->p = _p;
++}
++
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
+@@ -0,0 +1,911 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include "dwc_otg_plat.h"
++
++#include "dwc_otg_regs.h"
++#ifdef DEBUG
++#include "linux/timer.h"
++#endif
++
++/* the OTG capabilities. */
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++/* the maximum speed of operation in host and device mode. */
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++/* the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. */
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++/* the type of PHY interface to use. */
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++/* whether to use the internal or external supply to 
++ * drive the vbus with a ULPI phy. */
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++/* EP type. */
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep {
++        /** EP number used for register address lookup */
++        uint8_t  num;
++        /** EP direction 0 = OUT */
++        unsigned is_in : 1;           
++        /** EP active. */
++        unsigned active : 1;
++
++	/** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
++		If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
++        unsigned tx_fifo_num : 4;  
++        /** EP type: 0 - Control, 1 - ISOC,  2 - BULK,  3 - INTR */
++        unsigned type : 2;      
++#define DWC_OTG_EP_TYPE_CONTROL    0
++#define DWC_OTG_EP_TYPE_ISOC       1
++#define DWC_OTG_EP_TYPE_BULK       2
++#define DWC_OTG_EP_TYPE_INTR       3
++
++        /** DATA start PID for INTR and BULK EP */
++        unsigned data_pid_start : 1;  
++        /** Frame (even/odd) for ISOC EP */
++        unsigned even_odd_frame : 1;  
++        /** Max Packet bytes */
++        unsigned maxpacket : 11;
++
++        /** @name Transfer state */
++	/** @{ */
++
++	/**
++	 * Pointer to the beginning of the transfer buffer -- do not modify
++	 * during transfer.
++	 */
++	
++	uint32_t dma_addr;
++
++	uint8_t *start_xfer_buff;
++        /** pointer to the transfer buffer */
++        uint8_t *xfer_buff;          
++        /** Number of bytes to transfer */
++        unsigned xfer_len : 19;       
++        /** Number of bytes transferred. */
++        unsigned xfer_count : 19;
++        /** Sent ZLP */
++        unsigned sent_zlp : 1;
++        /** Total len for control transfer */
++        unsigned total_len : 19;
++
++		/** stall clear flag */
++		unsigned stall_clear_flag : 1;
++
++	/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status {
++	DWC_OTG_HC_XFER_NO_HALT_STATUS,
++	DWC_OTG_HC_XFER_COMPLETE,
++	DWC_OTG_HC_XFER_URB_COMPLETE,
++	DWC_OTG_HC_XFER_ACK,
++	DWC_OTG_HC_XFER_NAK,
++	DWC_OTG_HC_XFER_NYET,
++	DWC_OTG_HC_XFER_STALL,
++	DWC_OTG_HC_XFER_XACT_ERR,
++	DWC_OTG_HC_XFER_FRAME_OVERRUN,
++	DWC_OTG_HC_XFER_BABBLE_ERR,
++	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++	DWC_OTG_HC_XFER_AHB_ERR,
++	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++	DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++	
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc {
++	/** Host channel number used for register address lookup */
++	uint8_t  hc_num;
++
++	/** Device to access */
++	unsigned dev_addr : 7;
++
++	/** EP to access */
++	unsigned ep_num : 4;
++
++	/** EP direction. 0: OUT, 1: IN */
++	unsigned ep_is_in : 1;
++
++	/**
++	 * EP speed.
++	 * One of the following values:
++	 * 	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	unsigned speed : 2;
++#define DWC_OTG_EP_SPEED_LOW	0
++#define DWC_OTG_EP_SPEED_FULL	1
++#define DWC_OTG_EP_SPEED_HIGH	2	
++
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
++	 *	- DWC_OTG_EP_TYPE_ISOC: 1
++	 *	- DWC_OTG_EP_TYPE_BULK: 2
++	 *	- DWC_OTG_EP_TYPE_INTR: 3
++	 */
++	unsigned ep_type : 2;
++
++	/** Max packet size in bytes */
++	unsigned max_packet : 11;
++
++	/**
++	 * PID for initial transaction.
++	 * 0: DATA0,<br>
++	 * 1: DATA2,<br>
++	 * 2: DATA1,<br>
++	 * 3: MDATA (non-Control EP),
++	 *    SETUP (Control EP)
++	 */
++	unsigned data_pid_start : 2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++	/** Number of periodic transactions per (micro)frame */
++	unsigned multi_count: 2;
++
++	/** @name Transfer State */
++	/** @{ */
++
++	/** Pointer to the current transfer buffer position. */
++	uint8_t *xfer_buff;
++	/** Total number of bytes to transfer. */
++	uint32_t xfer_len;
++	/** Number of bytes transferred so far. */
++	uint32_t xfer_count;
++	/** Packet count at start of transfer.*/
++	uint16_t start_pkt_count;
++
++	/**
++	 * Flag to indicate whether the transfer has been started. Set to 1 if
++	 * it has been started, 0 otherwise.
++	 */
++	uint8_t xfer_started;
++
++	/**
++	 * Set to 1 to indicate that a PING request should be issued on this
++	 * channel. If 0, process normally.
++	 */
++	uint8_t	do_ping;
++
++	/**
++	 * Set to 1 to indicate that the error count for this transaction is
++	 * non-zero. Set to 0 if the error count is 0.
++	 */
++	uint8_t error_state;
++
++	/**
++	 * Set to 1 to indicate that this channel should be halted the next
++	 * time a request is queued for the channel. This is necessary in
++	 * slave mode if no request queue space is available when an attempt
++	 * is made to halt the channel.
++	 */
++	uint8_t halt_on_queue;
++
++	/**
++	 * Set to 1 if the host channel has been halted, but the core is not
++	 * finished flushing queued requests. Otherwise 0.
++	 */
++	uint8_t halt_pending;
++
++	/**
++	 * Reason for halting the host channel.
++	 */
++	dwc_otg_halt_status_e 	halt_status;
++
++	/*
++	 * Split settings for the host channel
++	 */
++	uint8_t do_split;          /**< Enable split for the channel */
++	uint8_t complete_split;    /**< Enable complete split */
++	uint8_t hub_addr;          /**< Address of high speed hub */
++
++	uint8_t port_addr;         /**< Port of the low/full speed device */
++	/** Split transaction position 
++	 * One of the following values:
++	 *    - DWC_HCSPLIT_XACTPOS_MID 
++	 *    - DWC_HCSPLIT_XACTPOS_BEGIN
++	 *    - DWC_HCSPLIT_XACTPOS_END
++	 *    - DWC_HCSPLIT_XACTPOS_ALL */
++	uint8_t xact_pos;
++
++	/** Set when the host channel does a short read. */
++	uint8_t short_read;
++
++	/**
++	 * Number of requests issued for this channel since it was assigned to
++	 * the current transfer (not counting PINGs).
++	 */
++	uint8_t requests;
++
++	/**
++	 * Queue Head for the transfer being processed by this channel.
++	 */
++	struct dwc_otg_qh *qh;
++
++	/** @} */
++
++	/** Entry in list of host channels. */
++	struct list_head	hc_list_entry;
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ * Parameter values are passed to the CIL initialization function
++ * dwc_otg_cil_init.
++ */
++
++typedef struct dwc_otg_core_params 
++{
++	int32_t opt;
++//#define dwc_param_opt_default 1
++        /**
++	 * Specifies the OTG capabilities. The driver will automatically
++	 * detect the value for this parameter if none is specified.
++         * 0 - HNP and SRP capable (default)
++         * 1 - SRP Only capable
++         * 2 - No HNP/SRP capable
++         */
++        int32_t otg_cap;
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++	/**
++         * Specifies whether to use slave or DMA mode for accessing the data
++         * FIFOs. The driver will automatically detect the value for this
++         * parameter if none is specified.
++         * 0 - Slave
++         * 1 - DMA (default, if available)
++         */
++	int32_t dma_enable;
++//#define dwc_param_dma_enable_default 1
++	/** The DMA Burst size (applicable only for External DMA
++         * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++         */
++        int32_t dma_burst_size;  /* Translate this to GAHBCFG values */
++//#define dwc_param_dma_burst_size_default 32
++	/**
++	 * Specifies the maximum speed of operation in host and device mode.
++	 * The actual speed depends on the speed of the attached device and
++	 * the value of phy_type. The actual speed depends on the speed of the
++	 * attached device.
++	 * 0 - High Speed (default)
++	 * 1 - Full Speed
++	 */
++        int32_t speed;
++//#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++	/** Specifies whether low power mode is supported when attached 
++	 *  to a Full Speed or Low Speed device in host mode.
++	 * 0 - Don't support low power mode (default)
++	 * 1 - Support low power mode
++	 */
++	int32_t host_support_fs_ls_low_power;
++//#define dwc_param_host_support_fs_ls_low_power_default 0
++	/** Specifies the PHY clock rate in low power mode when connected to a
++	 * Low Speed device in host mode. This parameter is applicable only if
++	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled.  If PHY_TYPE is set to FS
++	 * then defaults to 6 MHZ otherwise 48 MHZ.
++	 *
++	 * 0 - 48 MHz
++	 * 1 - 6 MHz
++	 */
++	int32_t host_ls_low_power_phy_clk;
++//#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++	/**
++	 * 0 - Use cC FIFO size parameters
++	 * 1 - Allow dynamic FIFO sizing (default)
++	 */
++	int32_t enable_dynamic_fifo;
++//#define dwc_param_enable_dynamic_fifo_default 1
++	/** Total number of 4-byte words in the data FIFO memory. This 
++	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic 
++	 * Tx FIFOs.
++	 * 32 to 32768 (default 8192)
++	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++	 */
++	int32_t data_fifo_size;
++//#define dwc_param_data_fifo_size_default 8192
++	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic 
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1064)
++	 */
++	int32_t dev_rx_fifo_size;
++//#define dwc_param_dev_rx_fifo_size_default 1064
++	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode 
++	 * when dynamic FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t dev_nperio_tx_fifo_size;
++//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++//#define dwc_param_dev_perio_tx_fifo_size_default 256
++	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic 
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)  
++	 */
++	int32_t host_rx_fifo_size;
++//#define dwc_param_host_rx_fifo_size_default 1024
++        /** Number of 4-byte words in the non-periodic Tx FIFO in host mode 
++	 * when Dynamic FIFO sizing is enabled in the core. 
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_nperio_tx_fifo_size;
++//#define dwc_param_host_nperio_tx_fifo_size_default 1024
++	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic 
++	 * FIFO sizing is enabled. 
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_perio_tx_fifo_size;
++//#define dwc_param_host_perio_tx_fifo_size_default 1024
++	/** The maximum transfer size supported in bytes.  
++	 * 2047 to 65,535  (default 65,535)
++	 */
++	int32_t max_transfer_size;
++//#define dwc_param_max_transfer_size_default 65535
++	/** The maximum number of packets in a transfer.  
++	 * 15 to 511  (default 511)
++	 */
++	int32_t max_packet_count;
++//#define dwc_param_max_packet_count_default 511
++	/** The number of host channel registers to use.  
++	 * 1 to 16 (default 12) 
++	 * Note: The FPGA configuration supports a maximum of 12 host channels.
++	 */
++	int32_t host_channels;
++//#define dwc_param_host_channels_default 12
++	/** The number of endpoints in addition to EP0 available for device 
++	 * mode operations. 
++	 * 1 to 15 (default 6 IN and OUT) 
++	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT 
++	 * endpoints in addition to EP0.
++	 */
++	int32_t dev_endpoints;
++//#define dwc_param_dev_endpoints_default 6
++        /** 
++         * Specifies the type of PHY interface to use. By default, the driver
++         * will automatically detect the phy_type.
++         * 
++         * 0 - Full Speed PHY
++         * 1 - UTMI+ (default)
++         * 2 - ULPI
++         */
++	int32_t phy_type; 
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++//#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++	/**
++         * Specifies the UTMI+ Data Width.  This parameter is
++         * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++         * PHY_TYPE, this parameter indicates the data width between
++         * the MAC and the ULPI Wrapper.) Also, this parameter is
++         * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++         * to "8 and 16 bits", meaning that the core has been
++         * configured to work at either data path width. 
++         *
++         * 8 or 16 bits (default 16)
++         */
++        int32_t phy_utmi_width;
++//#define dwc_param_phy_utmi_width_default 16
++        /**
++         * Specifies whether the ULPI operates at double or single
++         * data rate. This parameter is only applicable if PHY_TYPE is
++         * ULPI.
++         * 
++         * 0 - single data rate ULPI interface with 8 bit wide data
++         * bus (default)
++         * 1 - double data rate ULPI interface with 4 bit wide data
++         * bus
++         */
++        int32_t phy_ulpi_ddr;
++//#define dwc_param_phy_ulpi_ddr_default 0
++	/**
++	 * Specifies whether to use the internal or external supply to 
++	 * drive the vbus with a ULPI phy.
++	 */
++	int32_t phy_ulpi_ext_vbus;
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++//#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++        /**
++	 * Specifies whether to use the I2Cinterface for full speed PHY. This
++	 * parameter is only applicable if PHY_TYPE is FS.
++         * 0 - No (default)
++         * 1 - Yes
++         */
++        int32_t i2c_enable;
++//#define dwc_param_i2c_enable_default 0
++
++        int32_t ulpi_fs_ls;
++//#define dwc_param_ulpi_fs_ls_default 0
++
++	int32_t ts_dline;
++//#define dwc_param_ts_dline_default 0
++
++	/**
++	 * Specifies whether dedicated transmit FIFOs are
++	 * enabled for non periodic IN endpoints in device mode
++	 * 0 - No
++	 * 1 - Yes
++	 */
++	 int32_t en_multiple_tx_fifo;
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++	/** Number of 4-byte words in each of the Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++#define dwc_param_dev_tx_fifo_size_default 256
++
++	/** Thresholding enable flag-
++	 * bit 0 - enable non-ISO Tx thresholding
++	 * bit 1 - enable ISO Tx thresholding
++	 * bit 2 - enable Rx thresholding
++	 */
++	uint32_t thr_ctl;
++#define dwc_param_thr_ctl_default 0
++
++	/** Thresholding length for Tx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t tx_thr_length;
++#define dwc_param_tx_thr_length_default 64
++
++	/** Thresholding length for Rx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t rx_thr_length;
++#define dwc_param_rx_thr_length_default 64
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef	struct hc_xfer_info
++{
++	struct dwc_otg_core_if	*core_if;
++	dwc_hc_t		*hc;
++} hc_xfer_info_t;
++#endif
++
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++typedef struct dwc_otg_core_if 
++{
++    /** Parameters that define how the core should be configured.*/
++    dwc_otg_core_params_t      *core_params;
++
++    /** Core Global registers starting at offset 000h. */
++    dwc_otg_core_global_regs_t *core_global_regs;
++
++    /** Device-specific information */
++    dwc_otg_dev_if_t           *dev_if;
++    /** Host-specific information */
++    dwc_otg_host_if_t          *host_if;
++
++    /*
++     * Set to 1 if the core PHY interface bits in USBCFG have been
++     * initialized.
++     */
++    uint8_t phy_init_done;
++
++    /*
++     * SRP Success flag, set by srp success interrupt in FS I2C mode
++     */
++    uint8_t srp_success;
++    uint8_t srp_timer_started;
++
++    /* Common configuration information */
++    /** Power and Clock Gating Control Register */
++    volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++    /** Push/pop addresses for endpoints or host channels.*/
++    uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++    /** Total RAM for FIFOs (Bytes) */
++    uint16_t total_fifo_size;
++    /** Size of Rx FIFO (Bytes) */
++    uint16_t rx_fifo_size;
++    /** Size of Non-periodic Tx FIFO (Bytes) */
++    uint16_t nperio_tx_fifo_size;
++        
++    /** 1 if DMA is enabled, 0 otherwise. */
++    uint8_t	dma_enable;
++
++	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++	uint8_t en_multiple_tx_fifo;
++
++    /** Set to 1 if multiple packets of a high-bandwidth transfer is in
++     * process of being queued */
++    uint8_t queuing_high_bandwidth;
++
++    /** Hardware Configuration -- stored here for convenience.*/
++    hwcfg1_data_t hwcfg1;
++    hwcfg2_data_t hwcfg2;
++    hwcfg3_data_t hwcfg3;
++    hwcfg4_data_t hwcfg4;
++
++    /** The operational State, during transations
++     * (a_host>>a_peripherial and b_device=>b_host) this may not
++     * match the core but allows the software to determine
++     * transitions.
++     */
++    uint8_t op_state;
++        
++    /**
++     * Set to 1 if the HCD needs to be restarted on a session request
++     * interrupt. This is required if no connector ID status change has
++     * occurred since the HCD was last disconnected.
++     */
++    uint8_t restart_hcd_on_session_req;
++
++    /** HCD callbacks */
++    /** A-Device is a_host */
++#define A_HOST 		(1)
++    /** A-Device is a_suspend */
++#define A_SUSPEND 	(2)
++    /** A-Device is a_peripherial */
++#define A_PERIPHERAL 	(3)
++    /** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL	(4)
++    /** B-Device is operating as a Host. */
++#define B_HOST 		(5)        
++
++    /** HCD callbacks */
++    struct dwc_otg_cil_callbacks *hcd_cb;
++    /** PCD callbacks */
++    struct dwc_otg_cil_callbacks *pcd_cb;
++
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t p_tx_msk;
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t tx_msk;
++
++#ifdef DEBUG
++    uint32_t		start_hcchar_val[MAX_EPS_CHANNELS];
++
++    hc_xfer_info_t		hc_xfer_info[MAX_EPS_CHANNELS];
++    struct timer_list	hc_xfer_timer[MAX_EPS_CHANNELS];
++
++#if 1 // winder
++    uint32_t		hfnum_7_samples;
++    uint32_t		hfnum_7_frrem_accum;
++    uint32_t		hfnum_0_samples;
++    uint32_t		hfnum_0_frrem_accum;
++    uint32_t		hfnum_other_samples;
++    uint32_t		hfnum_other_frrem_accum;
++#else
++    uint32_t		hfnum_7_samples;
++    uint64_t		hfnum_7_frrem_accum;
++    uint32_t		hfnum_0_samples;
++    uint64_t		hfnum_0_frrem_accum;
++    uint32_t		hfnum_other_samples;
++    uint64_t		hfnum_other_frrem_accum;
++#endif
++	resource_size_t phys_addr;		/* Added to support PLB DMA : phys-virt mapping */
++#endif	
++
++} dwc_otg_core_if_t;
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++                                           dwc_otg_core_params_t *_core_params);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++			    dwc_hc_t *_hc,
++			    dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
++
++/**
++ * This function Reads HPRT0 in preparation to modify.  It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back 
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if) 
++{
++        hprt0_data_t hprt0;
++        hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
++        hprt0.b.prtena = 0;
++        hprt0.b.prtconndet = 0;
++        hprt0.b.prtenchng = 0;
++        hprt0.b.prtovrcurrchng = 0;
++        return hprt0.d32;
++}
++
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++				uint8_t *dest, 
++				uint16_t bytes);
++
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
++
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, 
++                                   const int _num );
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
++
++#define NP_TXFIFO_EMPTY -1
++#define MAX_NP_TXREQUEST_Q_SLOTS 8
++/**
++ * This function returns the endpoint number of the request at
++ * the top of non-periodic TX FIFO, or -1 if the request FIFO is
++ * empty.
++ */
++static inline int dwc_otg_top_nptxfifo_epnum(dwc_otg_core_if_t *_core_if) {
++	gnptxsts_data_t txstatus = {.d32 = 0};
++
++	txstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++	return (txstatus.b.nptxqspcavail == MAX_NP_TXREQUEST_Q_SLOTS ?
++		-1 : txstatus.b.nptxqtop_chnep);
++}
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) {
++	return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
++                dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) {
++	return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *_core_if) {
++        uint32_t v;
++        v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
++                dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
++        return (v & 0xffff);
++        
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *_core_if) {
++        uint32_t v;
++        v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
++                dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
++        return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *_core_if,
++                                                   dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	uint32_t v, msk, emp;
++	msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++	emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++	msk |= ((emp >> _ep->num) & 0x1) << 7;
++	v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) & msk;
++/*
++	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++        uint32_t v;
++        v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) &
++                dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++*/
++        return v;        
++}
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if, 
++                                                    dwc_ep_t *_ep)
++{
++        dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++        uint32_t v;
++        v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) &
++			dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
++        return v;        
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode 
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) {
++        return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++
++static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if) 
++{
++        return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if) 
++{
++        return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
++
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure.  This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks 
++{
++        /** Start function for role change */
++        int (*start) (void *_p);
++        /** Stop Function for role change */
++        int (*stop) (void *_p);
++        /** Disconnect Function for role change */
++        int (*disconnect) (void *_p);
++        /** Resume/Remote wakeup Function */
++        int (*resume_wakeup) (void *_p);
++        /** Suspend function */
++        int (*suspend) (void *_p);
++        /** Session Start (SRP) */
++        int (*session_start) (void *_p);
++        /** Pointer passed to start() and stop() */
++        void *p;
++} dwc_otg_cil_callbacks_t;
++
++
++
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++                                                dwc_otg_cil_callbacks_t *_cb,
++                                                void *_p);
++
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+@@ -0,0 +1,58 @@
++/******************************************************************************
++**
++** FILE NAME    : dwc_otg_cil_ifx.h
++** PROJECT      : Twinpass/Danube
++** MODULES      : DWC OTG USB
++**
++** DATE         : 07 Sep. 2007
++** AUTHOR       : Sung Winder
++** DESCRIPTION  : Default param value.
++** COPYRIGHT    :       Copyright (c) 2007
++**                      Infineon Technologies AG
++**                      2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++**                      Hsin-chu City, 300 Taiwan.
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date          $Author         $Comment
++** 12 April 2007   Sung Winder     Initiate Version
++*******************************************************************************/
++#if !defined(__DWC_OTG_CIL_IFX_H__)
++#define __DWC_OTG_CIL_IFX_H__
++
++/* ================ Default param value ================== */
++#define dwc_param_opt_default 1
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
++#define dwc_param_dma_enable_default 1
++#define dwc_param_dma_burst_size_default 32
++#define dwc_param_speed_default DWC_SPEED_PARAM_HIGH
++#define dwc_param_host_support_fs_ls_low_power_default 0
++#define dwc_param_host_ls_low_power_phy_clk_default DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ
++#define dwc_param_enable_dynamic_fifo_default 1
++#define dwc_param_data_fifo_size_default 2048
++#define dwc_param_dev_rx_fifo_size_default 1024
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++#define dwc_param_dev_perio_tx_fifo_size_default 768
++#define dwc_param_host_rx_fifo_size_default 640
++#define dwc_param_host_nperio_tx_fifo_size_default 640
++#define dwc_param_host_perio_tx_fifo_size_default 768
++#define dwc_param_max_transfer_size_default 65535
++#define dwc_param_max_packet_count_default 511
++#define dwc_param_host_channels_default 16
++#define dwc_param_dev_endpoints_default 6
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++#define dwc_param_phy_utmi_width_default 16
++#define dwc_param_phy_ulpi_ddr_default 0
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++#define dwc_param_i2c_enable_default 0
++#define dwc_param_ulpi_fs_ls_default 0
++#define dwc_param_ts_dline_default 0
++
++/* ======================================================= */
++
++#endif // __DWC_OTG_CIL_IFX_H__
++
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+@@ -0,0 +1,708 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 553126 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file 
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++#ifdef DEBUG
++inline const char *op_state_str( dwc_otg_core_if_t *_core_if ) 
++{
++        return (_core_if->op_state==A_HOST?"a_host":
++                (_core_if->op_state==A_SUSPEND?"a_suspend":
++                 (_core_if->op_state==A_PERIPHERAL?"a_peripheral":
++                  (_core_if->op_state==B_PERIPHERAL?"b_peripheral":
++                   (_core_if->op_state==B_HOST?"b_host":
++                    "unknown")))));
++}
++#endif
++
++/** This function will log a debug message 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *_core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", 
++		 dwc_otg_mode(_core_if) ? "Host" : "Device");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;	
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/** Start the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_start( dwc_otg_core_if_t *_core_if ) 
++{        
++        if (_core_if->hcd_cb && _core_if->hcd_cb->start) {
++                _core_if->hcd_cb->start( _core_if->hcd_cb->p );
++        }
++}
++/** Stop the HCD.  Helper function for using the HCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_stop( dwc_otg_core_if_t *_core_if ) 
++{        
++        if (_core_if->hcd_cb && _core_if->hcd_cb->stop) {
++                _core_if->hcd_cb->stop( _core_if->hcd_cb->p );
++        }
++}
++/** Disconnect the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_disconnect( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->hcd_cb && _core_if->hcd_cb->disconnect) {
++                _core_if->hcd_cb->disconnect( _core_if->hcd_cb->p );
++        }
++}
++/** Inform the HCD the a New Session has begun.  Helper function for
++ * using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_session_start( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->hcd_cb && _core_if->hcd_cb->session_start) {
++                _core_if->hcd_cb->session_start( _core_if->hcd_cb->p );
++        }
++}
++
++/** Start the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_start( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->start ) {
++                _core_if->pcd_cb->start( _core_if->pcd_cb->p );
++        }
++}
++/** Stop the PCD.  Helper function for using the PCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_stop( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->stop ) {
++                _core_if->pcd_cb->stop( _core_if->pcd_cb->p );
++        }
++}
++/** Suspend the PCD.  Helper function for using the PCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_suspend( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->suspend ) {
++                _core_if->pcd_cb->suspend( _core_if->pcd_cb->p );
++        }
++}
++/** Resume the PCD.  Helper function for using the PCD callbacks. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_resume( dwc_otg_core_if_t *_core_if ) 
++{
++        if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup ) {
++                _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
++        }
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *_core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs = 
++                _core_if->core_global_regs;
++	gotgint_data_t gotgint;
++        gotgctl_data_t gotgctl;
++	gintmsk_data_t gintmsk;
++
++	gotgint.d32 = dwc_read_reg32( &global_regs->gotgint);
++        gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
++                    op_state_str(_core_if));
++        //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32 );
++
++	if (gotgint.b.sesenddet) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session End Detected++ (%s)\n",
++                            op_state_str(_core_if));
++                gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++
++                if (_core_if->op_state == B_HOST) {
++                        pcd_start( _core_if );
++                        _core_if->op_state = B_PERIPHERAL;
++                } else {
++                        /* If not B_HOST and Device HNP still set. HNP
++                         * Did not succeed!*/
++                        if (gotgctl.b.devhnpen) {
++                                DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++                                DWC_ERROR( "Device Not Connected/Responding!\n" );
++                        }
++
++                        /* If Session End Detected the B-Cable has
++                         * been disconnected. */
++                        /* Reset PCD and Gadget driver to a
++                         * clean state. */
++                        pcd_stop(_core_if);
++                }
++                gotgctl.d32 = 0;
++                gotgctl.b.devhnpen = 1;
++                dwc_modify_reg32( &global_regs->gotgctl, 
++                                  gotgctl.d32, 0);
++        }
++	if (gotgint.b.sesreqsucstschng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session Reqeust Success Status Change++\n");
++                gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++                if (gotgctl.b.sesreqscs) {
++			if ((_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && 
++			    (_core_if->core_params->i2c_enable)) {
++				_core_if->srp_success = 1;
++			}
++			else {
++				pcd_resume( _core_if );
++				/* Clear Session Request */
++				gotgctl.d32 = 0;
++				gotgctl.b.sesreq = 1;
++				dwc_modify_reg32( &global_regs->gotgctl, 
++						  gotgctl.d32, 0);
++			}
++                }
++	}
++	if (gotgint.b.hstnegsucstschng) {
++                /* Print statements during the HNP interrupt handling
++                 * can cause it to fail.*/
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++                if (gotgctl.b.hstnegscs) {
++                        if (dwc_otg_is_host_mode(_core_if) ) {
++                                _core_if->op_state = B_HOST;
++				/*
++				 * Need to disable SOF interrupt immediately.
++				 * When switching from device to host, the PCD
++				 * interrupt handler won't handle the
++				 * interrupt if host mode is already set. The
++				 * HCD interrupt handler won't get called if
++				 * the HCD state is HALT. This means that the
++				 * interrupt does not get handled and Linux
++				 * complains loudly.
++				 */
++				gintmsk.d32 = 0;
++				gintmsk.b.sofintr = 1;
++				dwc_modify_reg32(&global_regs->gintmsk,
++						 gintmsk.d32, 0);
++                                pcd_stop(_core_if);
++                                /*
++                                 * Initialize the Core for Host mode.
++                                 */
++                                hcd_start( _core_if );
++                                _core_if->op_state = B_HOST;
++                        }
++                } else {
++                        gotgctl.d32 = 0;
++                        gotgctl.b.hnpreq = 1;
++                        gotgctl.b.devhnpen = 1;
++                        dwc_modify_reg32( &global_regs->gotgctl, 
++                                          gotgctl.d32, 0);
++                        DWC_DEBUGPL( DBG_ANY, "HNP Failed\n");
++                        DWC_ERROR( "Device Not Connected/Responding\n" );
++                }
++	}
++	if (gotgint.b.hstnegdet) {
++                /* The disconnect interrupt is set at the same time as
++		 * Host Negotiation Detected.  During the mode
++		 * switch all interrupts are cleared so the disconnect
++		 * interrupt handler will not get executed.
++                 */
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Host Negotiation Detected++ (%s)\n", 
++                            (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
++                if (dwc_otg_is_device_mode(_core_if)){
++                        DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",_core_if->op_state);
++                        hcd_disconnect( _core_if );
++                        pcd_start( _core_if );
++                        _core_if->op_state = A_PERIPHERAL;
++                } else {
++			/*
++			 * Need to disable SOF interrupt immediately. When
++			 * switching from device to host, the PCD interrupt
++			 * handler won't handle the interrupt if host mode is
++			 * already set. The HCD interrupt handler won't get
++			 * called if the HCD state is HALT. This means that
++			 * the interrupt does not get handled and Linux
++			 * complains loudly.
++			 */
++			gintmsk.d32 = 0;
++			gintmsk.b.sofintr = 1;
++			dwc_modify_reg32(&global_regs->gintmsk,
++					 gintmsk.d32, 0);
++                        pcd_stop( _core_if );
++                        hcd_start( _core_if );
++                        _core_if->op_state = A_HOST;
++                }
++	}
++	if (gotgint.b.adevtoutchng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "A-Device Timeout Change++\n");
++	}
++	if (gotgint.b.debdone) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Debounce Done++\n");
++	}
++
++	/* Clear GOTGINT */
++	dwc_write_reg32 (&_core_if->core_global_regs->gotgint, gotgint.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.  
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *_core_if)
++{
++        uint32_t count = 0;
++        
++	gintsts_data_t gintsts = { .d32 = 0 };
++	gintmsk_data_t gintmsk = { .d32 = 0 };
++        gotgctl_data_t gotgctl = { .d32 = 0 }; 
++
++	/*
++	 * Need to disable SOF interrupt immediately. If switching from device
++	 * to host, the PCD interrupt handler won't handle the interrupt if
++	 * host mode is already set. The HCD interrupt handler won't get
++	 * called if the HCD state is HALT. This means that the interrupt does
++	 * not get handled and Linux complains loudly.
++	 */
++	gintmsk.b.sofintr = 1;
++	dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++  (%s)\n",
++                    (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
++        gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++        
++        /* B-Device connector (Device Mode) */
++        if (gotgctl.b.conidsts) {
++                /* Wait for switch to device mode. */
++                while (!dwc_otg_is_device_mode(_core_if) ){
++                        DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                _core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(_core_if);
++		dwc_otg_enable_global_interrupts(_core_if);
++                pcd_start( _core_if );
++        } else {
++                /* A-Device connector (Host Mode) */
++                while (!dwc_otg_is_host_mode(_core_if) ) {
++                        DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                _core_if->op_state = A_HOST;
++                /*
++                 * Initialize the Core for Host mode.
++                 */
++		dwc_otg_core_init(_core_if);
++		dwc_otg_enable_global_interrupts(_core_if);
++                hcd_start( _core_if );
++        }
++
++	/* Set flag and clear interrupt */
++	gintsts.b.conidstschng = 1;
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** 
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power. 
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr( dwc_otg_core_if_t *_core_if )
++{
++#ifndef DWC_HOST_ONLY // winder
++    hprt0_data_t hprt0;
++#endif
++    gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++    DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");	
++
++    if (dwc_otg_is_device_mode(_core_if) ) {
++        DWC_PRINT("SRP: Device mode\n");
++    } else {
++        DWC_PRINT("SRP: Host mode\n");
++
++        /* Turn on the port power bit. */
++        hprt0.d32 = dwc_otg_read_hprt0( _core_if );
++        hprt0.b.prtpwr = 1;
++        dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
++
++        /* Start the Connection timer. So a message can be displayed
++        * if connect does not occur within 10 seconds. */ 
++        hcd_session_start( _core_if );
++    }
++#endif
++
++    /* Clear interrupt */
++    gintsts.d32 = 0;
++    gintsts.b.sessreqintr = 1;
++    dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++    return 1;
++}
++
++/** 
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr( dwc_otg_core_if_t *_core_if )
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++        if (dwc_otg_is_device_mode(_core_if) ) { 
++                dctl_data_t dctl = {.d32=0};
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", 
++                            dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts));
++#ifdef PARTIAL_POWER_DOWN
++                if (_core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++
++                        power.d32 = dwc_read_reg32( _core_if->pcgcctl );
++                        DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
++
++                        power.b.stoppclk = 0;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++                        power.b.pwrclmp = 0;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 0;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++                }
++#endif
++                /* Clear the Remote Wakeup Signalling */
++                dctl.b.rmtwkupsig = 1;
++                dwc_modify_reg32( &_core_if->dev_if->dev_global_regs->dctl, 
++                                  dctl.d32, 0 );
++
++                if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup) {
++                        _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
++                }
++        
++        } else {
++                /*
++		 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++		 * so that OPT tests pass with all PHYs).
++		 */
++                hprt0_data_t hprt0 = {.d32=0};
++                pcgcctl_data_t pcgcctl = {.d32=0};
++                /* Restart the Phy Clock */
++                pcgcctl.b.stoppclk = 1;
++                dwc_modify_reg32(_core_if->pcgcctl, pcgcctl.d32, 0);
++                UDELAY(10);
++                
++                /* Now wait for 70 ms. */
++                hprt0.d32 = dwc_otg_read_hprt0( _core_if );
++                DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++                MDELAY(70);
++                hprt0.b.prtres = 0; /* Resume */
++                dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);                
++                DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(_core_if->host_if->hprt0));
++        }        
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** 
++ * This interrupt indicates that a device has been disconnected from
++ * the root port. 
++ */
++int32_t dwc_otg_handle_disconnect_intr( dwc_otg_core_if_t *_core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", 
++                    (dwc_otg_is_host_mode(_core_if)?"Host":"Device"), 
++                    op_state_str(_core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++        if (_core_if->op_state == B_HOST) {
++                /* If in device mode Disconnect and stop the HCD, then
++                 * start the PCD. */
++                hcd_disconnect( _core_if );
++                pcd_start( _core_if );
++                _core_if->op_state = B_PERIPHERAL;
++        } else if (dwc_otg_is_device_mode(_core_if)) {
++                gotgctl_data_t gotgctl = { .d32 = 0 }; 
++                gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
++                if (gotgctl.b.hstsethnpen==1) {
++                        /* Do nothing, if HNP in process the OTG
++                         * interrupt "Host Negotiation Detected"
++                         * interrupt will do the mode switch.
++                         */
++                } else if (gotgctl.b.devhnpen == 0) {
++                        /* If in device mode Disconnect and stop the HCD, then
++                         * start the PCD. */
++                        hcd_disconnect( _core_if );
++                        pcd_start( _core_if );
++                        _core_if->op_state = B_PERIPHERAL;
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
++                }
++        } else {
++                if (_core_if->op_state == A_HOST) {
++                        /* A-Cable still connected but device disconnected. */
++                        hcd_disconnect( _core_if );
++                }
++        }
++#endif
++/* Without OTG, we should use the disconnect function!? winder added.*/
++#if 1 // NO OTG, so host only!!
++        hcd_disconnect( _core_if );
++#endif
++   
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ * 
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *_core_if )
++{
++        dsts_data_t dsts;
++        gintsts_data_t gintsts;
++
++         //805141:<IFTW-fchang>.removed DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
++
++        if (dwc_otg_is_device_mode( _core_if ) ) {             
++                /* Check the Device status register to determine if the Suspend
++                 * state is active. */
++                dsts.d32 = dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts);
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++                DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++                            "HWCFG4.power Optimize=%d\n", 
++                            dsts.b.suspsts, _core_if->hwcfg4.b.power_optimiz);
++
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++        
++                if (dsts.b.suspsts && _core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++                        DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++                        power.b.pwrclmp = 1;
++                        dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 1;
++                        dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
++
++                        power.b.stoppclk = 1;
++                        dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
++                
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
++                }
++#endif
++                /* PCD callback for suspend. */
++                pcd_suspend(_core_if);
++        } else {
++                if (_core_if->op_state == A_PERIPHERAL) {
++                        DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
++                        /* Clear the a_peripheral flag, back to a_host. */
++                        pcd_stop( _core_if );
++                        hcd_start( _core_if );
++                        _core_if->op_state = A_HOST;
++                }                
++        }
++        
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	dwc_write_reg32( &_core_if->core_global_regs->gintsts, gintsts.d32);
++
++        return 1;
++}
++
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *_core_if) 
++{
++        gintsts_data_t gintsts;
++        gintmsk_data_t gintmsk;
++        gintmsk_data_t gintmsk_common = {.d32=0};
++	gintmsk_common.b.wkupintr = 1;
++	gintmsk_common.b.sessreqintr = 1;
++	gintmsk_common.b.conidstschng = 1;
++	gintmsk_common.b.otgintr = 1;
++	gintmsk_common.b.modemismatch = 1;
++        gintmsk_common.b.disconnect = 1;
++        gintmsk_common.b.usbsuspend = 1;
++        /** @todo: The port interrupt occurs while in device 
++         * mode. Added code to CIL to clear the interrupt for now! 
++         */
++        gintmsk_common.b.portintr = 1;
++
++        gintsts.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintsts);
++        gintmsk.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintmsk);
++#ifdef DEBUG
++        /* if any common interrupts set */
++        if (gintsts.d32 & gintmsk_common.d32) {
++                DWC_DEBUGPL(DBG_ANY, "gintsts=%08x  gintmsk=%08x\n", 
++                            gintsts.d32, gintmsk.d32);
++        }
++#endif        
++        
++        return ((gintsts.d32 & gintmsk.d32 ) & gintmsk_common.d32);
++
++}
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode. 
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ * 
++ */
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if )
++{
++	int retval = 0;
++        gintsts_data_t gintsts;
++
++        gintsts.d32 = dwc_otg_read_common_intr(_core_if);
++
++        if (gintsts.b.modemismatch) {
++                retval |= dwc_otg_handle_mode_mismatch_intr( _core_if );
++        }
++        if (gintsts.b.otgintr) {
++                retval |= dwc_otg_handle_otg_intr( _core_if );
++        }
++        if (gintsts.b.conidstschng) {
++                retval |= dwc_otg_handle_conn_id_status_change_intr( _core_if );
++        }
++        if (gintsts.b.disconnect) {
++                retval |= dwc_otg_handle_disconnect_intr( _core_if );
++        }
++        if (gintsts.b.sessreqintr) {
++                retval |= dwc_otg_handle_session_req_intr( _core_if );
++        }
++        if (gintsts.b.wkupintr) {
++                retval |= dwc_otg_handle_wakeup_detected_intr( _core_if );
++        }
++        if (gintsts.b.usbsuspend) {
++                retval |= dwc_otg_handle_usb_suspend_intr( _core_if );
++        }
++        if (gintsts.b.portintr && dwc_otg_is_device_mode(_core_if)) {
++                /* The port interrupt occurs while in device mode with HPRT0
++                 * Port Enable/Disable.
++                 */
++                gintsts.d32 = 0;
++                gintsts.b.portintr = 1;
++                dwc_write_reg32(&_core_if->core_global_regs->gintsts, 
++                                gintsts.d32);
++                retval |= 1;
++                
++        }
++        return retval;
++}
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
+@@ -0,0 +1,1264 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_cleanup function is called.
++ * 
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM lm_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>  /* permission constants */
++#include <linux/irq.h>
++#include <asm/io.h>
++
++#include "dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_cil_ifx.h"
++
++// #include "dwc_otg_pcd.h" // device
++#include "dwc_otg_hcd.h"   // host
++
++#include "dwc_otg_ifx.h" // for Infineon platform specific.
++
++#define	DWC_DRIVER_VERSION	"2.60a 22-NOV-2006"
++#define	DWC_DRIVER_DESC		"HS OTG USB Controller driver"
++
++const char dwc_driver_name[] = "dwc_otg";
++
++static unsigned long dwc_iomem_base = IFX_USB_IOMEM_BASE;
++int dwc_irq = LQ_USB_INT;
++//int dwc_irq = 54;
++//int dwc_irq = IFXMIPS_USB_OC_INT;
++
++extern int ifx_usb_hc_init(unsigned long base_addr, int irq);
++extern void ifx_usb_hc_remove(void);
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++static dwc_otg_core_params_t dwc_otg_module_params = {
++        .opt = -1,
++        .otg_cap = -1,
++        .dma_enable = -1,
++	.dma_burst_size = -1,
++	.speed = -1,
++	.host_support_fs_ls_low_power = -1,
++	.host_ls_low_power_phy_clk = -1,
++	.enable_dynamic_fifo = -1,
++	.data_fifo_size = -1,
++	.dev_rx_fifo_size = -1,
++	.dev_nperio_tx_fifo_size = -1,
++	.dev_perio_tx_fifo_size = /* dev_perio_tx_fifo_size_1 */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},  /* 15 */
++	.host_rx_fifo_size = -1,
++	.host_nperio_tx_fifo_size = -1,
++	.host_perio_tx_fifo_size = -1,
++	.max_transfer_size = -1,
++	.max_packet_count = -1,
++	.host_channels = -1,
++	.dev_endpoints = -1,
++	.phy_type = -1,
++        .phy_utmi_width = -1,
++        .phy_ulpi_ddr = -1,
++        .phy_ulpi_ext_vbus = -1,
++	.i2c_enable = -1,
++	.ulpi_fs_ls = -1,
++	.ts_dline = -1,
++	.en_multiple_tx_fifo = -1,
++	.dev_tx_fifo_size = { /* dev_tx_fifo_size */
++     -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
++	}, /* 15 */
++	.thr_ctl = -1,
++	.tx_thr_length = -1,
++	.rx_thr_length = -1,
++};
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++        return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2,"%s\n", 
++                        DWC_DRIVER_VERSION);
++}
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0xff; /* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *_drv, char *_buf)
++{
++        return sprintf(_buf, "0x%0x\n", g_dbg_lvl);
++}
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *_drv, const char *_buf, 
++                               size_t _count)
++{
++	g_dbg_lvl = simple_strtoul(_buf, NULL, 16);
++        return _count;
++}
++static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
++
++/**
++ * This function is called during module intialization to verify that
++ * the module parameters are in a valid state.
++ */
++static int check_parameters(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	int retval = 0;
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_,_low_,_high_) \
++	((dwc_otg_module_params._param_ < (_low_)) || \
++         (dwc_otg_module_params._param_ > (_high_)))
++
++/* If the parameter has been set by the user, check that the parameter value is
++ * within the value range of values.  If not, report a module error. */
++#define DWC_OTG_PARAM_ERR(_param_,_low_,_high_,_string_) \
++        do { \
++		if (dwc_otg_module_params._param_ != -1) { \
++			if (DWC_OTG_PARAM_TEST(_param_,(_low_),(_high_))) { \
++				DWC_ERROR("`%d' invalid for parameter `%s'\n", \
++					  dwc_otg_module_params._param_, _string_); \
++				dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++				retval ++; \
++			} \
++		} \
++	} while (0)
++
++	DWC_OTG_PARAM_ERR(opt,0,1,"opt");
++	DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
++        DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
++	DWC_OTG_PARAM_ERR(speed,0,1,"speed");
++	DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
++	DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
++	DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
++	DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
++	DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
++	DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
++	DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
++	DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
++        DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
++        DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
++	DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
++	DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
++	DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
++
++	if (dwc_otg_module_params.dma_burst_size != -1) {
++		if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,256,256))
++		{
++			DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n", 
++				  dwc_otg_module_params.dma_burst_size);
++			dwc_otg_module_params.dma_burst_size = 32;
++			retval ++;
++		}
++	}
++
++	if (dwc_otg_module_params.phy_utmi_width != -1) {
++		if (DWC_OTG_PARAM_TEST(phy_utmi_width,8,8) &&
++		    DWC_OTG_PARAM_TEST(phy_utmi_width,16,16)) 
++		{
++			DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n", 
++				  dwc_otg_module_params.phy_utmi_width);
++			//dwc_otg_module_params.phy_utmi_width = 16;
++			dwc_otg_module_params.phy_utmi_width = 8;
++			retval ++;
++		}
++	}
++
++	for (i=0; i<15; i++) {
++		/** @todo should be like above */
++		//DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i],4,768,"dev_perio_tx_fifo_size");
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i],4,768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					  dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
++				dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++				retval ++;
++			}
++		}
++	}
++
++	DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
++	for (i = 0; i < 15; i++) {
++		/** @todo should be like above */
++		    //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i],4,768,"dev_tx_fifo_size");
++		    if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					dwc_otg_module_params.dev_tx_fifo_size[i],
++				     "dev_tx_fifo_size", i);
++				dwc_otg_module_params.dev_tx_fifo_size[i] =
++				    dwc_param_dev_tx_fifo_size_default;
++				retval++;
++			}
++		}
++	}
++	DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
++	DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
++	DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
++
++	/* At this point, all module parameters that have been set by the user
++	 * are valid, and those that have not are left unset.  Now set their
++	 * default values and/or check the parameters against the hardware
++	 * configurations of the OTG core. */
++
++
++
++/* This sets the parameter to the default value if it has not been set by the
++ * user */
++#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
++	({ \
++		int changed = 1; \
++		if (dwc_otg_module_params._param_ == -1) { \
++			changed = 0; \
++			dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++		} \
++		changed; \
++	})
++
++/* This checks the macro agains the hardware configuration to see if it is
++ * valid.  It is possible that the default value could be invalid.  In this
++ * case, it will report a module error if the user touched the parameter.
++ * Otherwise it will adjust the value without any error. */
++#define DWC_OTG_PARAM_CHECK_VALID(_param_,_str_,_is_valid_,_set_valid_) \
++	({ \
++	        int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
++		int error = 0; \
++		if (!(_is_valid_)) { \
++			if (changed) { \
++				DWC_ERROR("`%d' invalid for parameter `%s'.  Check HW configuration.\n", dwc_otg_module_params._param_,_str_); \
++				error = 1; \
++			} \
++			dwc_otg_module_params._param_ = (_set_valid_); \
++		} \
++		error; \
++	})
++
++	/* OTG Cap */
++	retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap,"otg_cap",
++                  ({
++			  int valid;
++			  valid = 1;
++			  switch (dwc_otg_module_params.otg_cap) {
++			  case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++				  if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) valid = 0;
++				  break;
++			  case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++				  if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
++				      (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
++				      (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
++				      (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST))
++				  {
++					  valid = 0;
++				  }
++				  break;
++			  case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++				  /* always valid */
++				  break;
++			  } 
++			  valid;
++		  }),
++                  (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
++		    (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
++		    (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++		    (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++		   DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
++	
++	retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable,"dma_enable",
++					    ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1, 
++					    0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(opt,"opt",
++					    1,
++					    0);
++
++	DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
++					    "host_support_fs_ls_low_power",
++					    1, 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
++				  "enable_dynamic_fifo",
++				  ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
++				   (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
++
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
++				  "data_fifo_size",
++				  (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
++				  core_if->hwcfg3.b.dfifo_depth);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
++				  "dev_rx_fifo_size",
++				  (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++				  dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
++				  "dev_nperio_tx_fifo_size",
++				  (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++				  (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
++					    "host_rx_fifo_size",
++					    (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++					    dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
++				  "host_nperio_tx_fifo_size",
++				  (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++				  (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
++					    "host_perio_tx_fifo_size",
++					    (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
++					    ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
++				  "max_transfer_size",
++				  (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
++				  ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
++				  "max_packet_count",
++				  (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
++				  ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
++				  "host_channels",
++				  (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
++				  (core_if->hwcfg2.b.num_host_chan + 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
++				  "dev_endpoints",
++				  (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
++				  core_if->hwcfg2.b.num_dev_ep);
++
++/*
++ * Define the following to disable the FS PHY Hardware checking.  This is for
++ * internal testing only.
++ *
++ * #define NO_FS_PHY_HW_CHECKS 
++ */
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++					    "phy_type", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++					    "phy_type",
++					    ({
++						    int valid = 0;
++						    if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
++							((core_if->hwcfg2.b.hs_phy_type == 1) || 
++							 (core_if->hwcfg2.b.hs_phy_type == 3)))
++						    {
++							    valid = 1;
++						    }
++						    else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
++							     ((core_if->hwcfg2.b.hs_phy_type == 2) || 
++							      (core_if->hwcfg2.b.hs_phy_type == 3)))
++						    {
++							    valid = 1;
++						    }
++						    else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++							     (core_if->hwcfg2.b.fs_phy_type == 1))
++						    {
++							    valid = 1;
++						    }
++						    valid;
++					    }),
++					    ({
++						    int set = DWC_PHY_TYPE_PARAM_FS;
++						    if (core_if->hwcfg2.b.hs_phy_type) { 
++							    if ((core_if->hwcfg2.b.hs_phy_type == 3) || 
++								(core_if->hwcfg2.b.hs_phy_type == 1)) {
++								    set = DWC_PHY_TYPE_PARAM_UTMI;
++							    }
++							    else {
++								    set = DWC_PHY_TYPE_PARAM_ULPI;
++							    }
++						    }
++						    set;
++					    }));
++#endif
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(speed,"speed",
++					    (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
++					    dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
++					    "host_ls_low_power_phy_clk",
++					    ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
++					    ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
++
++        DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
++        DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
++        DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
++        DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
++        DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++					    "i2c_enable", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++					    "i2c_enable",
++					    (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
++					    0);
++#endif
++
++	for (i=0; i<16; i++) {
++
++		int changed = 1;
++		int error = 0;
++
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'.  Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i],i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo,
++				"en_multiple_tx_fifo",
++				((dwc_otg_module_params.en_multiple_tx_fifo == 1) &&
++				(core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, 0);
++
++	for (i = 0; i < 16; i++) {
++		int changed = 1;
++		int error = 0;
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_tx_fifo_size[i] =
++			    dwc_param_dev_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <=
++		     (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'."
++					"Check HW configuration.\n",dwc_otg_module_params.dev_tx_fifo_size[i],i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_tx_fifo_size[i] =
++			    dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++	DWC_OTG_PARAM_SET_DEFAULT(thr_ctl);
++	DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
++	DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
++	return retval;
++} // check_parameters 
++
++
++/** 
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int _irq, void *_dev)
++{
++	dwc_otg_device_t *otg_dev = _dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_handle_common_intr( otg_dev->core_if );
++
++	mask_and_ack_ifx_irq (_irq);
++    
++	return IRQ_RETVAL(retval);
++}
++
++
++/**
++ * This function is called when a DWC_OTG device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @return
++ */
++static int
++dwc_otg_driver_remove(struct platform_device *_dev)
++{
++    //dwc_otg_device_t *otg_dev = dev_get_drvdata(&_dev->dev);
++    dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
++
++    DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, _dev);
++
++    if (otg_dev == NULL) {
++        /* Memory allocation for the dwc_otg_device failed. */
++        return 0;
++    }
++
++    /*
++    * Free the IRQ 
++    */
++    if (otg_dev->common_irq_installed) {
++        free_irq( otg_dev->irq, otg_dev );
++    }
++
++#ifndef DWC_DEVICE_ONLY
++    if (otg_dev->hcd != NULL) {
++        dwc_otg_hcd_remove(&_dev->dev);
++    }
++#endif
++	printk("after removehcd\n");
++
++// Note: Integrate HOST and DEVICE(Gadget) is not planned yet.
++#ifndef DWC_HOST_ONLY
++    if (otg_dev->pcd != NULL) {
++        dwc_otg_pcd_remove(otg_dev);
++    }
++#endif
++    if (otg_dev->core_if != NULL) {
++        dwc_otg_cil_remove( otg_dev->core_if );
++    }
++	printk("after removecil\n");
++
++    /*
++     * Remove the device attributes
++     */
++    dwc_otg_attr_remove(&_dev->dev);
++	printk("after removeattr\n");
++
++    /*
++     * Return the memory.
++     */
++    if (otg_dev->base != NULL) {
++        iounmap(otg_dev->base);
++    }
++	if (otg_dev->phys_addr != 0) {
++		release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
++	}
++    kfree(otg_dev);
++        
++    /*
++     * Clear the drvdata pointer.
++     */
++	//dev_set_drvdata(&_dev->dev, 0);
++    platform_set_drvdata(_dev, 0);
++    return 0;
++}
++
++/**
++ * This function is called when an DWC_OTG device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * lm_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @return
++ */
++static int __devinit
++dwc_otg_driver_probe(struct platform_device *_dev)
++{
++    int retval = 0;
++    dwc_otg_device_t *dwc_otg_device;
++    int32_t	snpsid;
++	struct resource *res;
++	gusbcfg_data_t usbcfg = {.d32 = 0};
++
++	dev_dbg(&_dev->dev, "dwc_otg_driver_probe (%p)\n", _dev);
++
++    dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
++    if (dwc_otg_device == 0) {
++        dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
++        retval = -ENOMEM;
++        goto fail;
++    }
++    memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
++    dwc_otg_device->reg_offset = 0xFFFFFFFF;
++
++    /*
++     * Retrieve the memory and IRQ resources.
++     */
++	dwc_otg_device->irq = platform_get_irq(_dev, 0);
++	if (dwc_otg_device->irq == 0) {
++		dev_err(&_dev->dev, "no device irq\n");
++		retval = -ENODEV;
++		goto fail;
++	}
++	dev_dbg(&_dev->dev, "OTG - device irq: %d\n", dwc_otg_device->irq);
++	res = platform_get_resource(_dev, IORESOURCE_MEM, 0);
++	if (res == NULL) {
++		dev_err(&_dev->dev, "no CSR address\n");
++		retval = -ENODEV;
++		goto fail;
++	}
++	dev_dbg(&_dev->dev, "OTG - ioresource_mem start0x%08x: end:0x%08x\n",
++		(unsigned)res->start, (unsigned)res->end);
++	dwc_otg_device->phys_addr = res->start;
++	dwc_otg_device->base_len = res->end - res->start + 1;
++	if (request_mem_region(dwc_otg_device->phys_addr, dwc_otg_device->base_len,
++	    dwc_driver_name) == NULL) {
++		dev_err(&_dev->dev, "request_mem_region failed\n");
++		retval = -EBUSY;
++		goto fail;
++	}
++
++	/*
++     * Map the DWC_otg Core memory into virtual address space.
++     */
++    dwc_otg_device->base = ioremap_nocache(dwc_otg_device->phys_addr, dwc_otg_device->base_len);
++    if (dwc_otg_device->base == NULL)    {
++        dev_err(&_dev->dev, "ioremap() failed\n");
++        retval = -ENOMEM;
++        goto fail;
++    }
++    dev_dbg(&_dev->dev, "mapped base=0x%08x\n", (unsigned)dwc_otg_device->base);
++
++    /*
++     * Attempt to ensure this device is really a DWC_otg Controller.
++     * Read and verify the SNPSID register contents. The value should be
++     * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
++     */
++    snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
++    if ((snpsid & 0xFFFFF000) != 0x4F542000) {
++        dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
++        retval = -EINVAL;
++        goto fail;
++    }
++
++    /*
++     * Initialize driver data to point to the global DWC_otg
++     * Device structure.
++     */
++    platform_set_drvdata(_dev, dwc_otg_device);
++    dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
++    dwc_otg_device->core_if = dwc_otg_cil_init( dwc_otg_device->base, &dwc_otg_module_params);
++    if (dwc_otg_device->core_if == 0) {
++        dev_err(&_dev->dev, "CIL initialization failed!\n");
++        retval = -ENOMEM;
++        goto fail;
++    }
++	
++    /*
++     * Validate parameter values.
++     */
++    if (check_parameters(dwc_otg_device->core_if) != 0) {
++        retval = -EINVAL;
++        goto fail;
++    }
++
++	/* Added for PLB DMA phys virt mapping */
++	//dwc_otg_device->core_if->phys_addr = dwc_otg_device->phys_addr;
++    /*
++     * Create Device Attributes in sysfs
++     */  
++    dwc_otg_attr_create (&_dev->dev);
++
++    /*
++     * Disable the global interrupt until all the interrupt
++     * handlers are installed.
++     */
++    dwc_otg_disable_global_interrupts( dwc_otg_device->core_if );
++    /*
++     * Install the interrupt handler for the common interrupts before
++     * enabling common interrupts in core_init below.
++     */
++    DWC_DEBUGPL( DBG_CIL, "registering (common) handler for irq%d\n", dwc_otg_device->irq);
++
++    retval = request_irq((unsigned int)dwc_otg_device->irq, dwc_otg_common_irq,
++        //SA_INTERRUPT|SA_SHIRQ, "dwc_otg", (void *)dwc_otg_device );
++        IRQF_SHARED, "dwc_otg", (void *)dwc_otg_device );
++        //IRQF_DISABLED, "dwc_otg", (void *)dwc_otg_device );
++    if (retval != 0) {
++        DWC_ERROR("request of irq%d failed retval: %d\n", dwc_otg_device->irq, retval);
++        retval = -EBUSY;
++        goto fail;
++    } else {
++        dwc_otg_device->common_irq_installed = 1;
++    }
++
++    /*
++     * Initialize the DWC_otg core.
++     */
++    dwc_otg_core_init( dwc_otg_device->core_if );
++
++
++#ifndef DWC_HOST_ONLY  // otg device mode. (gadget.)
++    /*
++     * Initialize the PCD
++     */
++    retval = dwc_otg_pcd_init(dwc_otg_device);
++    if (retval != 0) {
++        DWC_ERROR("dwc_otg_pcd_init failed\n");
++        dwc_otg_device->pcd = NULL;
++        goto fail;
++    }
++#endif // DWC_HOST_ONLY
++
++#ifndef DWC_DEVICE_ONLY // otg host mode. (HCD)
++    /*
++     * Initialize the HCD
++     */
++#if 1	/*fscz*/
++	/* force_host_mode */
++	usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
++	usbcfg.b.force_host_mode = 1;
++	dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
++#endif
++    retval = dwc_otg_hcd_init(&_dev->dev, dwc_otg_device);
++    if (retval != 0) {
++        DWC_ERROR("dwc_otg_hcd_init failed\n");
++        dwc_otg_device->hcd = NULL;
++        goto fail;
++    }
++#endif // DWC_DEVICE_ONLY
++
++    /*
++     * Enable the global interrupt after all the interrupt
++     * handlers are installed.
++     */
++    dwc_otg_enable_global_interrupts( dwc_otg_device->core_if );
++#if 0	/*fscz*/
++	usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
++	usbcfg.b.force_host_mode = 0;
++	dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
++#endif
++
++
++    return 0;
++
++fail:
++    dwc_otg_driver_remove(_dev);
++    return retval;
++}
++
++/** 
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++struct platform_driver dwc_otg_driver = {
++	.probe	= dwc_otg_driver_probe,
++	.remove	= dwc_otg_driver_remove,
++//	.suspend = dwc_otg_driver_suspend,
++//	.resume = dwc_otg_driver_resume,
++	.driver = {
++		.name = dwc_driver_name,
++		.owner = THIS_MODULE,
++	},
++};
++EXPORT_SYMBOL(dwc_otg_driver);
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_init(void) 
++{
++    int retval = 0;
++
++    printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
++
++	// ifxmips setup
++    retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq);
++    if (retval < 0)
++    {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        return retval;
++    }
++    dwc_otg_power_on(); // ifx only!!
++
++
++    retval = platform_driver_register(&dwc_otg_driver);
++
++    if (retval < 0) {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        goto error1;
++    }
++
++    retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
++    if (retval < 0)
++    {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        goto error2;
++    }
++    retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++    if (retval < 0)
++    {
++        printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++        goto error3;
++    }
++    return retval;
++
++
++error3:
++    driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++error2:
++    driver_unregister(&dwc_otg_driver.driver);
++error1:
++    ifx_usb_hc_remove();
++    return retval;
++}
++module_init(dwc_otg_init);
++
++/** 
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_cleanup(void)
++{
++    printk(KERN_DEBUG "dwc_otg_cleanup()\n");
++
++    driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++    driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++
++    platform_driver_unregister(&dwc_otg_driver);
++    ifx_usb_hc_remove();
++
++    printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++module_exit(dwc_otg_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
++MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
++MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "0");
++module_param_named(en_multiple_tx_fifo,
++		     dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo,
++		  "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1,
++		    dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2,
++		    dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3,
++		    dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4,
++		    dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5,
++		    dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6,
++		    dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7,
++		    dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8,
++		    dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9,
++		    dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10,
++		    dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11,
++		    dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12,
++		    dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13,
++		    dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14,
++		    dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15,
++		    dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit"
++		"0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++module_param_named (iomem_base, dwc_iomem_base, ulong, 0444);
++MODULE_PARM_DESC (dwc_iomem_base, "The base address of the DWC_OTG register.");
++module_param_named (irq, dwc_irq, int, 0444);
++MODULE_PARM_DESC (dwc_irq, "The interrupt number");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured.  Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++ 
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr> 
++ 
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++ 
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++ 
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++ 
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++ 
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++ 
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++ 
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++ 
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++ 
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++ 
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++ 
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++ 
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++ 
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++ 
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++ 
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++ 
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++ 
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++ 
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>otg_en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++*/
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
+@@ -0,0 +1,84 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510275 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_DRIVER_H__)
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_cil.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device
++{
++    /** Base address returned from ioremap() */
++    void *base;
++    
++    /** Pointer to the core interface structure. */
++    dwc_otg_core_if_t *core_if;
++
++    /** Register offset for Diagnostic API.*/
++    uint32_t reg_offset;
++
++    /** Pointer to the PCD structure. */
++    struct dwc_otg_pcd *pcd;
++
++    /** Pointer to the HCD structure. */
++    struct dwc_otg_hcd *hcd;
++
++    /** Flag to indicate whether the common IRQ handler is installed. */
++    uint8_t common_irq_installed;
++
++    /** Interrupt request number. */
++	unsigned int irq;
++
++    /** Physical address of Control and Status registers, used by
++     *  release_mem_region().
++     */
++	resource_size_t phys_addr;
++
++    /** Length of memory region, used by release_mem_region(). */
++	unsigned long base_len;
++} dwc_otg_device_t;
++
++//#define dev_dbg(fake, format, arg...) printk(KERN_CRIT __FILE__ ":%d: " format "\n" , __LINE__, ## arg)
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+@@ -0,0 +1,2870 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include <linux/dma-mapping.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++#include <asm/irq.h>
++#include "dwc_otg_ifx.h" // for Infineon platform specific.
++extern atomic_t release_later;
++
++static u64 dma_mask = DMA_BIT_MASK(32);
++
++static const char dwc_otg_hcd_name [] = "dwc_otg_hcd";
++static const struct hc_driver dwc_otg_hc_driver = 
++{
++	.description =		dwc_otg_hcd_name,
++	.product_desc = 	"DWC OTG Controller",
++	.hcd_priv_size = 	sizeof(dwc_otg_hcd_t),
++	.irq =			dwc_otg_hcd_irq,
++	.flags =		HCD_MEMORY | HCD_USB2,
++	//.reset =
++	.start =		dwc_otg_hcd_start,
++	//.suspend =		
++	//.resume =		
++	.stop =			dwc_otg_hcd_stop,
++	.urb_enqueue =		dwc_otg_hcd_urb_enqueue,
++	.urb_dequeue =		dwc_otg_hcd_urb_dequeue,
++	.endpoint_disable =	dwc_otg_hcd_endpoint_disable,
++	.get_frame_number =	dwc_otg_hcd_get_frame_number,
++	.hub_status_data =	dwc_otg_hcd_hub_status_data,
++	.hub_control =		dwc_otg_hcd_hub_control,
++	//.hub_suspend =	
++	//.hub_resume =		
++};
++
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The dwc_otg_hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(struct work_struct *work)
++{
++	struct dwc_otg_hcd *priv =
++		container_of(work, struct dwc_otg_hcd, start_work);
++	struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p;
++	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
++	if (usb_hcd) {
++		dwc_otg_hcd_start(usb_hcd);
++	}
++}
++
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *_p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p);
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++	if (core_if->op_state == B_HOST) {
++		/* 
++		 * Reset the port.  During a HNP mode switch the reset
++		 * needs to occur within 1ms and have a duration of at
++		 * least 50ms. 
++		 */
++		hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++		hprt0.b.prtrst = 1;
++		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++		((struct usb_hcd *)_p)->self.is_b_host = 1;
++	} else {
++		((struct usb_hcd *)_p)->self.is_b_host = 0;
++	}
++	/* Need to start the HCD in a non-interrupt context. */
++	INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++	dwc_otg_hcd->_p = _p;
++	schedule_work(&dwc_otg_hcd->start_work);
++	return 1;
++}
++
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb( void *_p )
++{
++	struct usb_hcd *usb_hcd = (struct usb_hcd *)_p;
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++	dwc_otg_hcd_stop( usb_hcd );
++	return 1;
++}
++static void del_xfer_timers(dwc_otg_hcd_t *_hcd)
++{
++#ifdef DEBUG
++	int i;
++	int num_channels = _hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		del_timer(&_hcd->core_if->hc_xfer_timer[i]);
++	}
++#endif	/*  */
++}
++
++static void del_timers(dwc_otg_hcd_t *_hcd)
++{
++	del_xfer_timers(_hcd);
++	del_timer(&_hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd,
++		struct list_head *_qh_list)
++{
++	struct list_head	*qh_item;
++	dwc_otg_qh_t		*qh;
++	struct list_head	*qtd_item;
++	dwc_otg_qtd_t		*qtd;
++
++	list_for_each(qh_item, _qh_list) {
++		qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
++		for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list;
++				qtd_item = qh->qtd_list.next) {
++			qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
++			if (qtd->urb != NULL) {
++				dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT);
++			}
++			dwc_otg_hcd_qtd_remove_and_free(qtd);
++		}
++	}
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t *_hcd)
++{
++	kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred);
++	kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive);
++	kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned);
++	kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb( void *_p )
++{
++	gintsts_data_t 	intr;
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++
++	/* 
++	 * Set status flags for the hub driver.
++	 */
++	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++	dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	intr.d32 = 0;
++	intr.b.nptxfempty = 1;
++	intr.b.ptxfempty = 1;
++	intr.b.hcintr = 1;
++	dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
++	dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
++
++	del_timers(dwc_otg_hcd);
++
++	/*
++	 * Turn off the vbus power only if the core has transitioned to device
++	 * mode. If still in host mode, need to keep power on to detect a
++	 * reconnection.
++	 */
++	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {        
++			hprt0_data_t hprt0 = { .d32=0 };
++			DWC_PRINT("Disconnect: PortPower off\n");
++			hprt0.b.prtpwr = 0;
++			dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++		}
++
++		dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	kill_all_urbs(dwc_otg_hcd);
++
++	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++		/* Clean up any host channels that were in use. */
++		int			num_channels;
++		int			i;
++		dwc_hc_t		*channel;
++		dwc_otg_hc_regs_t	*hc_regs;
++		hcchar_data_t		hcchar;
++
++		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++		if (!dwc_otg_hcd->core_if->dma_enable) {
++			/* Flush out any channel requests in slave mode. */
++			for (i = 0; i < num_channels; i++) {
++				channel = dwc_otg_hcd->hc_ptr_array[i];
++				if (list_empty(&channel->hc_list_entry)) {
++					hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++					hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++					if (hcchar.b.chen) {
++						hcchar.b.chen = 0;
++						hcchar.b.chdis = 1;
++						hcchar.b.epdir = 0;
++						dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++					}
++				}
++			}
++		}
++
++		for (i = 0; i < num_channels; i++) {
++			channel = dwc_otg_hcd->hc_ptr_array[i];
++			if (list_empty(&channel->hc_list_entry)) {
++				hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				if (hcchar.b.chen) {
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++				}
++
++				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
++				list_add_tail(&channel->hc_list_entry,
++						&dwc_otg_hcd->free_hc_list);
++			}
++		}
++	}
++
++	/* A disconnect will end the session so the B-Device is no
++	 * longer a B-host. */
++	((struct usb_hcd *)_p)->self.is_b_host = 0;
++
++	return 1;
++}
++
++/**
++ * Connection timeout function.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout( unsigned long _ptr )
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr);
++	DWC_PRINT( "Connect Timeout\n");
++	DWC_ERROR( "Device Not Connected/Responding\n" );
++}
++
++/**
++ * Start the connection timer.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.  The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer( dwc_otg_hcd_t *_hcd)
++{
++	init_timer( &_hcd->conn_timer );
++	_hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
++	_hcd->conn_timer.data = (unsigned long)0;
++	_hcd->conn_timer.expires = jiffies + (HZ*10);
++	add_timer( &_hcd->conn_timer );
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb( void *_p )
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++	dwc_otg_hcd_start_connect_timer( dwc_otg_hcd );
++	return 1;
++}
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++	.start = dwc_otg_hcd_start_cb,
++	.stop = dwc_otg_hcd_stop_cb,
++	.disconnect = dwc_otg_hcd_disconnect_cb,
++	.session_start = dwc_otg_hcd_session_start_cb,
++	.p = 0,
++};
++
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func (unsigned long data)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t*)data;
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++	hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++	hprt0.b.prtrst = 1;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	mdelay (60);
++
++	hprt0.b.prtrst = 0;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_otg_hcd->flags.b.port_reset_change = 1;	
++
++	return;
++}
++
++static struct tasklet_struct reset_tasklet = { 
++	.next = NULL,
++	.state = 0,
++	.count = ATOMIC_INIT(0),
++	.func = reset_tasklet_func,
++	.data = 0,
++};
++
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
++
++int  __devinit  dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device)
++{
++	struct usb_hcd *hcd = NULL;
++	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++	int 		num_channels;
++	int 		i;
++	dwc_hc_t	*channel;
++
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
++
++	/*
++	 * Allocate memory for the base HCD plus the DWC OTG HCD.
++	 * Initialize the base HCD.
++	 */
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev));
++	if (hcd == NULL) {
++		retval = -ENOMEM;
++		goto error1;
++	}
++	dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */
++	hcd->regs = otg_dev->base;
++	hcd->rsrc_start = (int)otg_dev->base;
++
++	hcd->self.otg_port = 1;	 
++
++	/* Initialize the DWC OTG HCD. */
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_hcd->core_if = otg_dev->core_if;
++	otg_dev->hcd = dwc_otg_hcd;
++
++	/* Register the HCD CIL Callbacks */
++	dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, 
++			&hcd_cil_callbacks, hcd);
++
++	/* Initialize the non-periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred);
++
++	/* Initialize the periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
++
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
++	num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
++		if (channel == NULL) {
++			retval = -ENOMEM;
++			DWC_ERROR("%s: host channel allocation failed\n", __func__);
++			goto error2;
++		}
++		memset(channel, 0, sizeof(dwc_hc_t));
++		channel->hc_num = i;
++		dwc_otg_hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++		init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++#endif		
++
++		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
++	}
++
++	/* Initialize the Connection timeout timer. */
++	init_timer( &dwc_otg_hcd->conn_timer );
++
++	/* Initialize reset tasklet. */
++	reset_tasklet.data = (unsigned long) dwc_otg_hcd;
++	dwc_otg_hcd->reset_tasklet = &reset_tasklet;
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (otg_dev->core_if->dma_enable) {
++		DWC_PRINT("Using DMA mode\n");
++		//_dev->dma_mask = (void *)~0;
++		//_dev->coherent_dma_mask = ~0;
++		_dev->dma_mask = &dma_mask;
++		_dev->coherent_dma_mask = DMA_BIT_MASK(32);
++	} else {
++		DWC_PRINT("Using Slave mode\n");
++		_dev->dma_mask = (void *)0;
++		_dev->coherent_dma_mask = 0;
++	}
++
++	init_hcd_usecs(dwc_otg_hcd);
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls dwc_otg_hcd_start method.
++	 */
++	retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
++	if (retval < 0) {
++		goto error2;
++	}
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	if (otg_dev->core_if->dma_enable) {
++		dwc_otg_hcd->status_buf =
++			dma_alloc_coherent(_dev,
++					DWC_OTG_HCD_STATUS_BUF_SIZE,
++					&dwc_otg_hcd->status_buf_dma,
++					GFP_KERNEL | GFP_DMA);
++	} else {
++		dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				GFP_KERNEL);
++	}
++	if (dwc_otg_hcd->status_buf == NULL) {
++		retval = -ENOMEM;
++		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++		goto error3;
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", 
++			dev_name(_dev), hcd->self.busnum);
++
++	return 0;
++
++	/* Error conditions */
++error3:
++	usb_remove_hcd(hcd);
++error2:
++	dwc_otg_hcd_free(hcd);
++	usb_put_hcd(hcd);
++error1:
++	return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void dwc_otg_hcd_remove(struct device *_dev)
++{
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++	dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd;
++	struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
++
++	/* Turn off all interrupts */
++	dwc_write_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
++	dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
++
++	usb_remove_hcd(hcd);
++
++	dwc_otg_hcd_free(hcd);
++
++	usb_put_hcd(hcd);
++
++	return;
++}
++
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void hcd_reinit(dwc_otg_hcd_t *_hcd)
++{
++	struct list_head 	*item;
++	int			num_channels;
++	int			i;
++	dwc_hc_t		*channel;
++
++	_hcd->flags.d32 = 0;
++
++	_hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active;
++	_hcd->available_host_channels = _hcd->core_if->core_params->host_channels;
++
++	/*
++	 * Put all channels in the free channel list and clean up channel
++	 * states.
++	 */
++	item = _hcd->free_hc_list.next;
++	while (item != &_hcd->free_hc_list) {
++		list_del(item);
++		item = _hcd->free_hc_list.next;
++	}
++	num_channels = _hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = _hcd->hc_ptr_array[i];
++		list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list);
++		dwc_otg_hc_cleanup(_hcd->core_if, channel);
++	}
++
++	/* Initialize the DWC core for host mode operation. */
++	dwc_otg_core_host_init(_hcd->core_if);
++}
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int dwc_otg_hcd_start(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if;
++	struct usb_bus *bus;
++
++	//      int retval;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++
++	bus = hcd_to_bus(_hcd);
++
++	/* Initialize the bus state.  If the core is in Device Mode
++	 * HALT the USB bus and return. */
++	if (dwc_otg_is_device_mode (core_if)) {
++		_hcd->state = HC_STATE_HALT;
++		return 0;
++	}
++	_hcd->state = HC_STATE_RUNNING;
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(_hcd);
++	}
++	else {
++#if 0
++		struct usb_device *udev;
++		udev = usb_alloc_dev(NULL, bus, 0);
++		if (!udev) {
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++			return -ENODEV;
++		}
++		udev->speed = USB_SPEED_HIGH;
++		/* Not needed - VJ
++		   if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) {
++		   DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
++		   return -ENODEV;
++		   }
++		   */
++#else
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++#endif
++	}
++
++	hcd_reinit(dwc_otg_hcd);
++
++	return 0;
++}
++
++static void qh_list_free(dwc_otg_hcd_t *_hcd, struct list_head *_qh_list)
++{
++	struct list_head 	*item;
++	dwc_otg_qh_t		*qh;
++
++	if (_qh_list->next == NULL) {
++		/* The list hasn't been initialized yet. */
++		return;
++	}
++
++	/* Ensure there are no QTDs or URBs left. */
++	kill_urbs_in_qh_list(_hcd, _qh_list);
++
++	for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) {
++		qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++		dwc_otg_hcd_qh_remove_and_free(_hcd, qh);
++	}
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	hprt0_data_t hprt0 = { .d32=0 };
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
++
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++	 * and the QH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off the vbus power */
++	DWC_PRINT("PortPower off\n");
++	hprt0.b.prtpwr = 0;
++	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++
++	return;
++}
++
++
++/** Returns the current frame number. */
++int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++	hfnum_data_t hfnum;
++
++	hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
++			host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
++#endif	
++	return hfnum.b.frnum;
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++void dwc_otg_hcd_free(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++	int		i;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++	del_timers(dwc_otg_hcd);
++
++	/* Free memory for QH/QTD lists */
++	qh_list_free(dwc_otg_hcd, 	&dwc_otg_hcd->non_periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++	/* Free memory for the host channels. */
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++		if (hc != NULL) {
++			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
++			kfree(hc);
++		}
++	}
++
++	if (dwc_otg_hcd->core_if->dma_enable) {
++		if (dwc_otg_hcd->status_buf_dma) {
++			dma_free_coherent(_hcd->self.controller,
++					DWC_OTG_HCD_STATUS_BUF_SIZE,
++					dwc_otg_hcd->status_buf,
++					dwc_otg_hcd->status_buf_dma);
++		}
++	} else if (dwc_otg_hcd->status_buf != NULL) {
++		kfree(dwc_otg_hcd->status_buf);
++	}
++
++	return;
++}
++
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *_urb, char* _fn_name)
++{
++	DWC_PRINT("%s, urb %p\n", _fn_name, _urb);
++	DWC_PRINT("  Device address: %d\n", usb_pipedevice(_urb->pipe));
++	DWC_PRINT("  Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe),
++			(usb_pipein(_urb->pipe) ? "IN" : "OUT"));
++	DWC_PRINT("  Endpoint type: %s\n",
++			({char *pipetype;
++			 switch (usb_pipetype(_urb->pipe)) {
++			 case PIPE_CONTROL: pipetype = "CONTROL"; break;
++			 case PIPE_BULK: pipetype = "BULK"; break;
++			 case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++			 case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++			 default: pipetype = "UNKNOWN"; break;
++			 }; pipetype;}));
++	DWC_PRINT("  Speed: %s\n",
++			({char *speed;
++			 switch (_urb->dev->speed) {
++			 case USB_SPEED_HIGH: speed = "HIGH"; break;
++			 case USB_SPEED_FULL: speed = "FULL"; break;
++			 case USB_SPEED_LOW: speed = "LOW"; break;
++			 default: speed = "UNKNOWN"; break;
++			 }; speed;}));
++	DWC_PRINT("  Max packet size: %d\n",
++			usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
++	DWC_PRINT("  Data buffer length: %d\n", _urb->transfer_buffer_length);
++	DWC_PRINT("  Transfer buffer: %p, Transfer DMA: %p\n",
++			_urb->transfer_buffer, (void *)_urb->transfer_dma);
++	DWC_PRINT("  Setup buffer: %p, Setup DMA: %p\n",
++			_urb->setup_packet, (void *)_urb->setup_dma);
++	DWC_PRINT("  Interval: %d\n", _urb->interval);
++	if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++		for (i = 0; i < _urb->number_of_packets;  i++) {
++			DWC_PRINT("  ISO Desc %d:\n", i);
++			DWC_PRINT("    offset: %d, length %d\n",
++					_urb->iso_frame_desc[i].offset,
++					_urb->iso_frame_desc[i].length);
++		}
++	}
++}
++
++static void dump_channel_info(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *qh)
++{
++	if (qh->channel != NULL) {
++		dwc_hc_t *hc = qh->channel;
++		struct list_head *item;
++		dwc_otg_qh_t *qh_item;
++		int num_channels = _hcd->core_if->core_params->host_channels;
++		int i;
++
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t 	hcchar;
++		hcsplt_data_t	hcsplt;
++		hctsiz_data_t 	hctsiz;
++		uint32_t	hcdma;
++
++		hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++		DWC_PRINT("  Assigned to channel %p:\n", hc);
++		DWC_PRINT("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++		DWC_PRINT("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++				hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		DWC_PRINT("  NP inactive sched:\n");
++		list_for_each(item, &_hcd->non_periodic_sched_inactive) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		} DWC_PRINT("  NP active sched:\n");
++		list_for_each(item, &_hcd->non_periodic_sched_deferred) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		} DWC_PRINT("  NP deferred sched:\n");
++		list_for_each(item, &_hcd->non_periodic_sched_active) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		} DWC_PRINT("  Channels: \n");
++		for (i = 0; i < num_channels; i++) {
++			dwc_hc_t *hc = _hcd->hc_ptr_array[i];
++			DWC_PRINT("    %2d: %p\n", i, hc);
++		}
++	}
++}
++#endif // DEBUG
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, 
++		struct urb *_urb, 
++		gfp_t _mem_flags)
++{
++	unsigned long flags;
++	int retval;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	dwc_otg_qtd_t *qtd;
++
++	local_irq_save(flags);
++	retval = usb_hcd_link_urb_to_ep(_hcd, _urb);
++	if (retval) {
++		local_irq_restore(flags);
++		return retval;
++	}
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue");
++	}
++#endif // DEBUG
++	if (!dwc_otg_hcd->flags.b.port_connect_status) {
++		/* No longer connected. */
++		local_irq_restore(flags);
++		return -ENODEV;
++	}
++
++	qtd = dwc_otg_hcd_qtd_create (_urb);
++	if (qtd == NULL) {
++		local_irq_restore(flags);
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++		return -ENOMEM;
++	}
++
++	retval = dwc_otg_hcd_qtd_add (qtd, dwc_otg_hcd);
++	if (retval < 0) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++				"Error status %d\n", retval);
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++
++	local_irq_restore (flags);
++	return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success.  */
++int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status)
++{
++	unsigned long flags;
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	dwc_otg_qtd_t *urb_qtd;
++	dwc_otg_qh_t *qh;
++	int retval;
++	//struct usb_host_endpoint *_ep = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++	local_irq_save(flags);
++
++	retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status);
++	if (retval) {
++		local_irq_restore(flags);
++		return retval;
++	}
++
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++	urb_qtd = (dwc_otg_qtd_t *)_urb->hcpriv;
++	if (urb_qtd == NULL) {
++		printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb);
++		goto done;
++	}
++	qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr;
++	if (qh == NULL) {
++		goto done;
++	}
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue");
++		if (urb_qtd == qh->qtd_in_process) {
++			dump_channel_info(dwc_otg_hcd, qh);
++		}
++	}
++#endif // DEBUG
++
++	if (urb_qtd == qh->qtd_in_process) {
++		/* The QTD is in process (it has been assigned to a channel). */
++
++		if (dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
++					DWC_OTG_HC_XFER_URB_DEQUEUE);
++		}
++	}
++
++	/*
++	 * Free the QTD and clean up the associated QH. Leave the QH in the
++	 * schedule if it has any remaining QTDs.
++	 */
++	dwc_otg_hcd_qtd_remove_and_free(urb_qtd);
++	if (urb_qtd == qh->qtd_in_process) {
++		dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
++		qh->channel = NULL;
++		qh->qtd_in_process = NULL;
++	} else if (list_empty(&qh->qtd_list)) {
++		dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
++	}
++
++done:
++	local_irq_restore(flags);
++	_urb->hcpriv = NULL;
++
++	/* Higher layer software sets URB status. */
++	usb_hcd_unlink_urb_from_ep(_hcd, _urb);
++	usb_hcd_giveback_urb(_hcd, _urb, _status);
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("Called usb_hcd_giveback_urb()\n");
++		DWC_PRINT("  urb->status = %d\n", _urb->status);
++	}
++
++	return 0;
++}
++
++
++/** Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd,
++		struct usb_host_endpoint *_ep)
++
++{
++	dwc_otg_qh_t *qh;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++			"endpoint=%d\n", _ep->desc.bEndpointAddress,
++			dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress));
++
++	qh = (dwc_otg_qh_t *)(_ep->hcpriv);
++	if (qh != NULL) {
++#ifdef DEBUG
++		/** Check that the QTD list is really empty */
++		if (!list_empty(&qh->qtd_list)) {
++			DWC_WARN("DWC OTG HCD EP DISABLE:"
++					" QTD List for this endpoint is not empty\n");
++		}
++#endif // DEBUG
++
++		dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++		_ep->hcpriv = NULL;
++	}
++
++	return;
++}
++extern int dwc_irq;
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *_hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++
++	mask_and_ack_ifx_irq (dwc_irq);
++	return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++
++	_buf[0] = 0;
++	_buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
++			dwc_otg_hcd->flags.b.port_reset_change ||
++			dwc_otg_hcd->flags.b.port_enable_change ||
++			dwc_otg_hcd->flags.b.port_suspend_change ||
++			dwc_otg_hcd->flags.b.port_over_current_change) << 1;
++
++#ifdef DEBUG
++	if (_buf[0]) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++				" Root port status changed\n");
++		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++				dwc_otg_hcd->flags.b.port_connect_status_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++				dwc_otg_hcd->flags.b.port_reset_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++				dwc_otg_hcd->flags.b.port_enable_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++				dwc_otg_hcd->flags.b.port_suspend_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++				dwc_otg_hcd->flags.b.port_over_current_change);
++	}
++#endif // DEBUG
++	return (_buf[0] != 0);
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++dwc_otg_core_global_regs_t *global_regs;
++dwc_otg_host_global_regs_t *hc_global_regs;
++dwc_otg_hc_regs_t *hc_regs;
++uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Send Setup packet (Get Device Descriptor)
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		//		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		MDELAY(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	/* Fill FIFO with Setup data for Get Device Descriptor */
++	data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++	dwc_write_reg32(data_fifo++, 0x01000680);
++	dwc_write_reg32(data_fifo++, 0x00080000);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++
++static void do_in_ack(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++	host_grxsts_data_t grxsts;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Receive Control In packet
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		MDELAY(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 1;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++		case DWC_GRXSTS_PKTSTS_IN:
++			/* Read the data into the host buffer */
++			if (grxsts.b.bcnt > 0) {
++				int i;
++				int word_count = (grxsts.b.bcnt + 3) / 4;
++
++				data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++				for (i = 0; i < word_count; i++) {
++					(void)dwc_read_reg32(data_fifo++);
++				}
++			}
++
++			//fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
++			break;
++
++		default:
++			//fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++			break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++		case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++			break;
++
++		default:
++			//fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++			break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	//	usleep(100000);
++	//	mdelay(100);
++	MDELAY(1);
++
++	/*
++	 * Send handshake packet
++	 */
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		MDELAY(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 0;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++#endif /* DWC_HS_ELECT_TST */
++
++/** Handles hub class-specific requests.*/
++int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, 
++		u16 _typeReq, 
++		u16 _wValue, 
++		u16 _wIndex, 
++		char *_buf, 
++		u16 _wLength)
++{
++	int retval = 0;
++
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++	dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd (_hcd)->core_if;
++	struct usb_hub_descriptor *desc;
++	hprt0_data_t hprt0 = {.d32 = 0};
++
++	uint32_t port_status;
++
++	switch (_typeReq) {
++		case ClearHubFeature:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"ClearHubFeature 0x%x\n", _wValue);
++			switch (_wValue) {
++				case C_HUB_LOCAL_POWER:
++				case C_HUB_OVER_CURRENT:
++					/* Nothing required here */
++					break;
++				default:
++					retval = -EINVAL;
++					DWC_ERROR ("DWC OTG HCD - "
++							"ClearHubFeature request %xh unknown\n", _wValue);
++			}
++			break;
++		case ClearPortFeature:
++			if (!_wIndex || _wIndex > 1)
++				goto error;
++
++			switch (_wValue) {
++				case USB_PORT_FEAT_ENABLE:
++					DWC_DEBUGPL (DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtena = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_SUSPEND:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtres = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					/* Clear Resume bit */
++					mdelay (100);
++					hprt0.b.prtres = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_POWER:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_POWER\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtpwr = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_INDICATOR:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++					/* Port inidicator not supported */
++					break;
++				case USB_PORT_FEAT_C_CONNECTION:
++					/* Clears drivers internal connect status change
++					 * flag */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++					dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++					break;
++				case USB_PORT_FEAT_C_RESET:
++					/* Clears the driver's internal Port Reset Change
++					 * flag */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++					dwc_otg_hcd->flags.b.port_reset_change = 0;
++					break;
++				case USB_PORT_FEAT_C_ENABLE:
++					/* Clears the driver's internal Port
++					 * Enable/Disable Change flag */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++					dwc_otg_hcd->flags.b.port_enable_change = 0;
++					break;
++				case USB_PORT_FEAT_C_SUSPEND:
++					/* Clears the driver's internal Port Suspend
++					 * Change flag, which is set when resume signaling on
++					 * the host port is complete */
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++					dwc_otg_hcd->flags.b.port_suspend_change = 0;
++					break;
++				case USB_PORT_FEAT_C_OVER_CURRENT:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++					dwc_otg_hcd->flags.b.port_over_current_change = 0;
++					break;
++				default:
++					retval = -EINVAL;
++					DWC_ERROR ("DWC OTG HCD - "
++							"ClearPortFeature request %xh "
++							"unknown or unsupported\n", _wValue);
++			}
++			break;
++		case GetHubDescriptor:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"GetHubDescriptor\n");
++			desc = (struct usb_hub_descriptor *)_buf;
++			desc->bDescLength = 9;
++			desc->bDescriptorType = 0x29;
++			desc->bNbrPorts = 1;
++			desc->wHubCharacteristics = 0x08;
++			desc->bPwrOn2PwrGood = 1;
++			desc->bHubContrCurrent = 0;
++			desc->bitmap[0] = 0;
++			desc->bitmap[1] = 0xff;
++			break;
++		case GetHubStatus:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"GetHubStatus\n");
++			memset (_buf, 0, 4);
++			break;
++		case GetPortStatus:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"GetPortStatus\n");
++
++			if (!_wIndex || _wIndex > 1)
++				goto error;
++
++			port_status = 0;
++
++			if (dwc_otg_hcd->flags.b.port_connect_status_change)
++				port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++
++			if (dwc_otg_hcd->flags.b.port_enable_change)
++				port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++
++			if (dwc_otg_hcd->flags.b.port_suspend_change)
++				port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++
++			if (dwc_otg_hcd->flags.b.port_reset_change)
++				port_status |= (1 << USB_PORT_FEAT_C_RESET);
++
++			if (dwc_otg_hcd->flags.b.port_over_current_change) {
++				DWC_ERROR("Device Not Supported\n");
++				port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++			}
++
++			if (!dwc_otg_hcd->flags.b.port_connect_status) {
++				printk("DISCONNECTED PORT\n");
++				/*
++				 * The port is disconnected, which means the core is
++				 * either in device mode or it soon will be. Just
++				 * return 0's for the remainder of the port status
++				 * since the port register can't be read if the core
++				 * is in device mode.
++				 */
++#if 1 // winder.
++				*((u32 *) _buf) = cpu_to_le32(port_status);
++#else
++				*((__le32 *) _buf) = cpu_to_le32(port_status);
++#endif
++				break;
++			}
++
++			hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
++			DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++
++			if (hprt0.b.prtconnsts) 
++				port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++
++			if (hprt0.b.prtena)
++				port_status |= (1 << USB_PORT_FEAT_ENABLE);
++
++			if (hprt0.b.prtsusp)
++				port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++
++			if (hprt0.b.prtovrcurract)
++				port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++
++			if (hprt0.b.prtrst)
++				port_status |= (1 << USB_PORT_FEAT_RESET);
++
++			if (hprt0.b.prtpwr)
++				port_status |= (1 << USB_PORT_FEAT_POWER);
++
++			if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++				port_status |= USB_PORT_STAT_HIGH_SPEED;
++
++			else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++				port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
++
++			if (hprt0.b.prttstctl)
++				port_status |= (1 << USB_PORT_FEAT_TEST);
++
++			/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++#if 1 // winder.
++			*((u32 *) _buf) = cpu_to_le32(port_status);
++#else
++			*((__le32 *) _buf) = cpu_to_le32(port_status);
++#endif
++
++			break;
++		case SetHubFeature:
++			DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++					"SetHubFeature\n");
++			/* No HUB features supported */
++			break;
++		case SetPortFeature:
++			if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
++				goto error;
++
++			if (!dwc_otg_hcd->flags.b.port_connect_status) {
++				/*
++				 * The port is disconnected, which means the core is
++				 * either in device mode or it soon will be. Just
++				 * return without doing anything since the port
++				 * register can't be written if the core is in device
++				 * mode.
++				 */
++				break;
++			}
++
++			switch (_wValue) {
++				case USB_PORT_FEAT_SUSPEND:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++					if (_hcd->self.otg_port == _wIndex
++							&& _hcd->self.b_hnp_enable) {
++						gotgctl_data_t  gotgctl = {.d32=0};
++						gotgctl.b.hstsethnpen = 1;
++						dwc_modify_reg32(&core_if->core_global_regs->
++								gotgctl, 0, gotgctl.d32);
++						core_if->op_state = A_SUSPEND;
++					}
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtsusp = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					//DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);       
++					/* Suspend the Phy Clock */
++					{
++						pcgcctl_data_t pcgcctl = {.d32=0};
++						pcgcctl.b.stoppclk = 1;
++						dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
++					}
++
++					/* For HNP the bus must be suspended for at least 200ms.*/
++					if (_hcd->self.b_hnp_enable) {
++						mdelay(200);
++						//DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state);
++					}
++					break;
++				case USB_PORT_FEAT_POWER:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_POWER\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					hprt0.b.prtpwr = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++				case USB_PORT_FEAT_RESET:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_RESET\n");
++					hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++					/* TODO: Is this for OTG protocol??
++					 *       We shoudl remove OTG totally for Danube system.
++					 *       But, in the future, maybe we need this.
++					 */
++#if 1 // winder 
++					hprt0.b.prtrst = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++#else
++					/* When B-Host the Port reset bit is set in
++					 * the Start HCD Callback function, so that
++					 * the reset is started within 1ms of the HNP
++					 * success interrupt. */
++					if (!_hcd->self.is_b_host) {
++						hprt0.b.prtrst = 1;
++						dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					}
++#endif
++					/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++					MDELAY (60);
++					hprt0.b.prtrst = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					break;
++
++#ifdef DWC_HS_ELECT_TST
++				case USB_PORT_FEAT_TEST:
++					{
++						uint32_t t;
++						gintmsk_data_t gintmsk;
++
++						t = (_wIndex >> 8); /* MSB wIndex USB */
++						DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++								"SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++						printk("USB_PORT_FEAT_TEST %d\n", t);
++						if (t < 6) {
++							hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++							hprt0.b.prttstctl = t;
++							dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++						} else {
++							/* Setup global vars with reg addresses (quick and
++							 * dirty hack, should be cleaned up)
++							 */
++							global_regs = core_if->core_global_regs;
++							hc_global_regs = core_if->host_if->host_global_regs;
++							hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
++							data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++							if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
++								/* Save current interrupt mask */
++								gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++								/* Disable all interrupts while we muck with
++								 * the hardware directly
++								 */
++								dwc_write_reg32(&global_regs->gintmsk, 0);
++
++								/* 15 second delay per the test spec */
++								mdelay(15000);
++
++								/* Drive suspend on the root port */
++								hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++								hprt0.b.prtsusp = 1;
++								hprt0.b.prtres = 0;
++								dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++								/* 15 second delay per the test spec */
++								mdelay(15000);
++
++								/* Drive resume on the root port */
++								hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++								hprt0.b.prtsusp = 0;
++								hprt0.b.prtres = 1;
++								dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++								mdelay(100);
++
++								/* Clear the resume bit */
++								hprt0.b.prtres = 0;
++								dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++								/* Restore interrupts */
++								dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++							} else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++								/* Save current interrupt mask */
++								gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++								/* Disable all interrupts while we muck with
++								 * the hardware directly
++								 */
++								dwc_write_reg32(&global_regs->gintmsk, 0);
++
++								/* 15 second delay per the test spec */
++								mdelay(15000);
++
++								/* Send the Setup packet */
++								do_setup();
++
++								/* 15 second delay so nothing else happens for awhile */
++								mdelay(15000);
++
++								/* Restore interrupts */
++								dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++							} else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++								/* Save current interrupt mask */
++								gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++								/* Disable all interrupts while we muck with
++								 * the hardware directly
++								 */
++								dwc_write_reg32(&global_regs->gintmsk, 0);
++
++								/* Send the Setup packet */
++								do_setup();
++
++								/* 15 second delay so nothing else happens for awhile */
++								mdelay(15000);
++
++								/* Send the In and Ack packets */
++								do_in_ack();
++
++								/* 15 second delay so nothing else happens for awhile */
++								mdelay(15000);
++
++								/* Restore interrupts */
++								dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++							}
++						}
++						break;
++					}
++#endif /* DWC_HS_ELECT_TST */
++
++				case USB_PORT_FEAT_INDICATOR:
++					DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++							"SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++					/* Not supported */
++					break;
++				default:
++					retval = -EINVAL;
++					DWC_ERROR ("DWC OTG HCD - "
++							"SetPortFeature request %xh "
++							"unknown or unsupported\n", _wValue);
++					break;
++			}
++			break;
++		default:
++error:
++			retval = -EINVAL;
++			DWC_WARN ("DWC OTG HCD - "
++					"Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", 
++					_typeReq, _wIndex, _wValue);
++			break;
++	}
++
++	return retval;
++}
++
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	dwc_hc_t	*hc;
++	dwc_otg_qtd_t	*qtd;
++	struct urb	*urb;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh);
++
++	hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
++
++	/* Remove the host channel from the free list. */
++	list_del_init(&hc->hc_list_entry);
++
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++	urb = qtd->urb;
++	_qh->channel = hc;
++	_qh->qtd_in_process = qtd;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	hc->dev_addr = usb_pipedevice(urb->pipe);
++	hc->ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (urb->dev->speed == USB_SPEED_LOW) {
++		hc->speed = DWC_OTG_EP_SPEED_LOW;
++	} else if (urb->dev->speed == USB_SPEED_FULL) {
++		hc->speed = DWC_OTG_EP_SPEED_FULL;
++	} else {
++		hc->speed = DWC_OTG_EP_SPEED_HIGH;
++	}
++	hc->max_packet = dwc_max_packet(_qh->maxp);
++
++	hc->xfer_started = 0;
++	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++	hc->error_state = (qtd->error_count > 0);
++	hc->halt_on_queue = 0;
++	hc->halt_pending = 0;
++	hc->requests = 0;
++
++	/*
++	 * The following values may be modified in the transfer type section
++	 * below. The xfer_len value may be reduced when the transfer is
++	 * started to accommodate the max widths of the XferSize and PktCnt
++	 * fields in the HCTSIZn register.
++	 */
++	hc->do_ping = _qh->ping_state;
++	hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
++	hc->data_pid_start = _qh->data_toggle;
++	hc->multi_count = 1;
++
++	if (_hcd->core_if->dma_enable) {
++		hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma + urb->actual_length;
++	} else {
++		hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
++	}
++	hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
++	hc->xfer_count = 0;
++
++	/*
++	 * Set the split attributes
++	 */
++	hc->do_split = 0;
++	if (_qh->do_split) {
++		hc->do_split = 1;
++		hc->xact_pos = qtd->isoc_split_pos;
++		hc->complete_split = qtd->complete_split;
++		hc->hub_addr = urb->dev->tt->hub->devnum;
++		hc->port_addr = urb->dev->ttport;
++	}
++
++	switch (usb_pipetype(urb->pipe)) {
++		case PIPE_CONTROL:
++			hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++			switch (qtd->control_phase) {
++				case DWC_OTG_CONTROL_SETUP:
++					DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
++					hc->do_ping = 0;
++					hc->ep_is_in = 0;
++					hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++					if (_hcd->core_if->dma_enable) {
++						hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma;
++					} else {
++						hc->xfer_buff = (uint8_t *)urb->setup_packet;
++					}
++					hc->xfer_len = 8;
++					break;
++				case DWC_OTG_CONTROL_DATA:
++					DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
++					hc->data_pid_start = qtd->data_toggle;
++					break;
++				case DWC_OTG_CONTROL_STATUS:
++					/*
++					 * Direction is opposite of data direction or IN if no
++					 * data.
++					 */
++					DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
++					if (urb->transfer_buffer_length == 0) {
++						hc->ep_is_in = 1;
++					} else {
++						hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
++					}
++					if (hc->ep_is_in) {
++						hc->do_ping = 0;
++					}
++					hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++					hc->xfer_len = 0;
++					if (_hcd->core_if->dma_enable) {
++						hc->xfer_buff = (uint8_t *)_hcd->status_buf_dma;
++					} else {
++						hc->xfer_buff = (uint8_t *)_hcd->status_buf;
++					}
++					break;
++			}
++			break;
++		case PIPE_BULK:
++			hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++			break;
++		case PIPE_INTERRUPT:
++			hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++			break;
++		case PIPE_ISOCHRONOUS:
++			{
++				struct usb_iso_packet_descriptor *frame_desc;
++				frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++				hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++				if (_hcd->core_if->dma_enable) {
++					hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma;
++				} else {
++					hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
++				}
++				hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
++				hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
++
++				if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++					if (hc->xfer_len <= 188) {
++						hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++					}
++					else {
++						hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
++					}
++				}
++			}
++			break;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		/*
++		 * This value may be modified when the transfer is started to
++		 * reflect the actual transfer length.
++		 */
++		hc->multi_count = dwc_hb_mult(_qh->maxp);
++	}
++
++	dwc_otg_hc_init(_hcd->core_if, hc);
++	hc->qh = _qh;
++}
++#define DEBUG_HOST_CHANNELS
++#ifdef DEBUG_HOST_CHANNELS
++static int last_sel_trans_num_per_scheduled = 0;
++module_param(last_sel_trans_num_per_scheduled, int, 0444);
++
++static int last_sel_trans_num_nonper_scheduled = 0;
++module_param(last_sel_trans_num_nonper_scheduled, int, 0444);
++
++static int last_sel_trans_num_avail_hc_at_start = 0;
++module_param(last_sel_trans_num_avail_hc_at_start, int, 0444);
++
++static int last_sel_trans_num_avail_hc_at_end = 0;
++module_param(last_sel_trans_num_avail_hc_at_end, int, 0444);
++#endif /* DEBUG_HOST_CHANNELS */
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param _hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd)
++{
++	struct list_head 		*qh_ptr;
++	dwc_otg_qh_t 			*qh;
++	int				num_channels;
++	unsigned long flags;
++	dwc_otg_transaction_type_e	ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
++#endif	/*  */
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_per_scheduled = 0;
++	last_sel_trans_num_nonper_scheduled = 0;
++	last_sel_trans_num_avail_hc_at_start = _hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	/* Process entries in the periodic ready list. */
++	num_channels = _hcd->core_if->core_params->host_channels;
++	qh_ptr = _hcd->periodic_sched_ready.next;
++	while (qh_ptr != &_hcd->periodic_sched_ready
++			&& !list_empty(&_hcd->free_hc_list)) {
++
++		// Make sure we leave one channel for non periodic transactions.
++		local_irq_save(flags);
++		if (_hcd->available_host_channels <= 1) {
++			local_irq_restore(flags);
++			break;
++		}
++		_hcd->available_host_channels--;
++		local_irq_restore(flags);
++#ifdef DEBUG_HOST_CHANNELS
++		last_sel_trans_num_per_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(_hcd, qh);
++
++		/*
++		 * Move the QH from the periodic ready schedule to the
++		 * periodic assigned schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		local_irq_save(flags);
++		list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned);
++		local_irq_restore(flags);
++		ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++	}
++
++	/*
++	 * Process entries in the deferred portion of the non-periodic list.
++	 * A NAK put them here and, at the right time, they need to be
++	 * placed on the sched_inactive list.
++	 */
++	qh_ptr = _hcd->non_periodic_sched_deferred.next;
++	while (qh_ptr != &_hcd->non_periodic_sched_deferred) {
++		uint16_t frame_number =
++			dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		qh_ptr = qh_ptr->next;
++
++		if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++			// NAK did this
++			/*
++			 * Move the QH from the non periodic deferred schedule to
++			 * the non periodic inactive schedule.
++			 */
++			local_irq_save(flags);
++			list_move(&qh->qh_list_entry,
++					&_hcd->non_periodic_sched_inactive);
++			local_irq_restore(flags);
++		}
++	}
++
++	/*
++	 * Process entries in the inactive portion of the non-periodic
++	 * schedule. Some free host channels may not be used if they are
++	 * reserved for periodic transfers.
++	 */
++	qh_ptr = _hcd->non_periodic_sched_inactive.next;
++	num_channels = _hcd->core_if->core_params->host_channels;
++	while (qh_ptr != &_hcd->non_periodic_sched_inactive
++			&& !list_empty(&_hcd->free_hc_list)) {
++
++		local_irq_save(flags);
++		if (_hcd->available_host_channels < 1) {
++			local_irq_restore(flags);
++			break;
++		}
++		_hcd->available_host_channels--;
++		local_irq_restore(flags);
++#ifdef DEBUG_HOST_CHANNELS
++		last_sel_trans_num_nonper_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(_hcd, qh);
++
++		/*
++		 * Move the QH from the non-periodic inactive schedule to the
++		 * non-periodic active schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		local_irq_save(flags);
++		list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active);
++		local_irq_restore(flags);
++
++		if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++			ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++		} else {
++			ret_val = DWC_OTG_TRANSACTION_ALL;
++		}
++
++	}
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_avail_hc_at_end = _hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t *_hcd,
++		dwc_hc_t *_hc,
++		uint16_t _fifo_dwords_avail)
++{
++	int retval;
++
++	if (_hcd->core_if->dma_enable) {
++		if (!_hc->xfer_started) {
++			dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++			_hc->qh->ping_state = 0;
++		}
++		retval = 0;
++	} else 	if (_hc->halt_pending) {
++		/* Don't queue a request if the channel has been halted. */
++		retval = 0;
++	} else if (_hc->halt_on_queue) {
++		dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status);
++		retval = 0;
++	} else if (_hc->do_ping) {
++		if (!_hc->xfer_started) {
++			dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++		}
++		retval = 0;
++	} else if (!_hc->ep_is_in ||
++			_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		if ((_fifo_dwords_avail * 4) >= _hc->max_packet) {
++			if (!_hc->xfer_started) {
++				dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++				retval = 1;
++			} else {
++				retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
++			}
++		} else {
++			retval = -1;
++		}
++	} else {		
++		if (!_hc->xfer_started) {
++			dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++			retval = 1;
++		} else {
++			retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t *_hcd)
++{
++	gnptxsts_data_t		tx_status;
++	struct list_head	*orig_qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int			no_queue_space = 0;
++	int			no_fifo_space = 0;
++	int			more_to_do = 0;
++
++	dwc_otg_core_global_regs_t *global_regs = _hcd->core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG	
++	tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (before queue): %d\n",
++			tx_status.b.nptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
++			tx_status.b.nptxfspcavail);
++#endif
++	/*
++	 * Keep track of the starting point. Skip over the start-of-list
++	 * entry.
++	 */
++	if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
++		_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++	}
++	orig_qh_ptr = _hcd->non_periodic_qh_ptr;
++
++	/*
++	 * Process once through the active list or until no more space is
++	 * available in the request queue or the Tx FIFO.
++	 */
++	do {
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		if (!_hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		status = queue_transaction(_hcd, qh->channel, tx_status.b.nptxfspcavail);
++
++		if (status > 0) {
++			more_to_do = 1;
++		} else if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/* Advance to next QH, skipping start-of-list entry. */
++		_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++		if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
++			_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++		}
++
++	} while (_hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++	if (!_hcd->core_if->dma_enable) {
++		gintmsk_data_t intr_mask = {.d32 = 0};
++		intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG	
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (after queue): %d\n",
++				tx_status.b.nptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (after queue): %d\n",
++				tx_status.b.nptxfspcavail);
++#endif
++		if (more_to_do || no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the non-periodic
++			 * Tx FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t *_hcd)
++{
++	hptxsts_data_t		tx_status;
++	struct list_head	*qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int 			no_queue_space = 0;
++	int			no_fifo_space = 0;
++
++	dwc_otg_host_global_regs_t *host_regs;
++	host_regs = _hcd->core_if->host_if->host_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG	
++	tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (before queue): %d\n",
++			tx_status.b.ptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (before queue): %d\n",
++			tx_status.b.ptxfspcavail);
++#endif
++
++	qh_ptr = _hcd->periodic_sched_assigned.next;
++	while (qh_ptr != &_hcd->periodic_sched_assigned) {
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		if (tx_status.b.ptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Set a flag if we're queuing high-bandwidth in slave mode.
++		 * The flag prevents any halts to get into the request queue in
++		 * the middle of multiple high-bandwidth packets getting queued.
++		 */
++		if ((!_hcd->core_if->dma_enable) && 
++				(qh->channel->multi_count > 1)) 
++		{
++			_hcd->core_if->queuing_high_bandwidth = 1;
++		}
++
++		status = queue_transaction(_hcd, qh->channel, tx_status.b.ptxfspcavail);
++		if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/*
++		 * In Slave mode, stay on the current transfer until there is
++		 * nothing more to do or the high-bandwidth request count is
++		 * reached. In DMA mode, only need to queue one request. The
++		 * controller automatically handles multiple packets for
++		 * high-bandwidth transfers.
++		 */
++		if (_hcd->core_if->dma_enable ||
++				(status == 0 ||
++				 qh->channel->requests == qh->channel->multi_count)) {
++			qh_ptr = qh_ptr->next;
++			/*
++			 * Move the QH from the periodic assigned schedule to
++			 * the periodic queued schedule.
++			 */
++			list_move(&qh->qh_list_entry, &_hcd->periodic_sched_queued);
++
++			/* done queuing high bandwidth */
++			_hcd->core_if->queuing_high_bandwidth = 0;
++		}
++	}
++
++	if (!_hcd->core_if->dma_enable) {
++		dwc_otg_core_global_regs_t *global_regs;
++		gintmsk_data_t intr_mask = {.d32 = 0};
++
++		global_regs = _hcd->core_if->core_global_regs;
++		intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG	
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (after queue): %d\n",
++				tx_status.b.ptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (after queue): %d\n",
++				tx_status.b.ptxfspcavail);
++#endif
++		if (!(list_empty(&_hcd->periodic_sched_assigned)) ||
++				no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the periodic Tx
++			 * FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}		
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
++		dwc_otg_transaction_type_e _tr_type)
++{
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++	/* Process host channels associated with periodic transfers. */
++	if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++				_tr_type == DWC_OTG_TRANSACTION_ALL) &&
++			!list_empty(&_hcd->periodic_sched_assigned)) {
++
++		process_periodic_channels(_hcd);
++	}
++
++	/* Process host channels associated with non-periodic transfers. */
++	if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++				_tr_type == DWC_OTG_TRANSACTION_ALL)) {
++		if (!list_empty(&_hcd->non_periodic_sched_active)) {
++			process_non_periodic_channels(_hcd);
++		} else {
++			/*
++			 * Ensure NP Tx FIFO empty interrupt is disabled when
++			 * there are no non-periodic transfers to process.
++			 */
++			gintmsk_data_t gintmsk = {.d32 = 0};
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++		}
++	}
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.
++ */
++void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb,
++		int _status)
++	__releases(_hcd->lock)
++__acquires(_hcd->lock)
++{
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
++				__func__, _urb, usb_pipedevice(_urb->pipe),
++				usb_pipeendpoint(_urb->pipe),
++				usb_pipein(_urb->pipe) ? "IN" : "OUT", _status);
++		if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
++			int i;
++			for (i = 0; i < _urb->number_of_packets; i++) {
++				DWC_PRINT("  ISO Desc %d status: %d\n",
++						i, _urb->iso_frame_desc[i].status);
++			}
++		}
++	}
++#endif
++
++	_urb->status = _status;
++	_urb->hcpriv = NULL;
++	usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb);
++	spin_unlock(&_hcd->lock);
++	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status);
++	spin_lock(&_hcd->lock);
++}
++
++/*
++ * Returns the Queue Head for an URB.
++ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb)
++{
++	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb);
++	return (dwc_otg_qh_t *)ep->hcpriv;
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data (uint8_t *setup)
++{
++	int i;
++	if (CHK_DEBUG_LEVEL(DBG_HCD)){
++		DWC_PRINT("Setup Data = MSB ");
++		for (i=7; i>=0; i--) DWC_PRINT ("%02x ", setup[i]);
++		DWC_PRINT("\n");
++		DWC_PRINT("  bmRequestType Tranfer = %s\n", (setup[0]&0x80) ? "Device-to-Host" : "Host-to-Device");
++		DWC_PRINT("  bmRequestType Type = ");
++		switch ((setup[0]&0x60) >> 5) {
++			case 0: DWC_PRINT("Standard\n"); break;
++			case 1:	DWC_PRINT("Class\n"); break;
++			case 2:	DWC_PRINT("Vendor\n"); break;
++			case 3: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bmRequestType Recipient = ");
++		switch (setup[0]&0x1f) {
++			case 0: DWC_PRINT("Device\n"); break;
++			case 1: DWC_PRINT("Interface\n"); break;
++			case 2: DWC_PRINT("Endpoint\n"); break;
++			case 3: DWC_PRINT("Other\n"); break;
++			default: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bRequest = 0x%0x\n", setup[1]);
++		DWC_PRINT("  wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
++		DWC_PRINT("  wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
++		DWC_PRINT("  wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
++	}
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd) {
++#ifdef DEBUG
++#if 0
++	DWC_PRINT("Frame remaining at SOF:\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->frrem_samples, _hcd->frrem_accum,
++			(_hcd->frrem_samples > 0) ?
++			_hcd->frrem_accum/_hcd->frrem_samples : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %u, avg %u\n",
++			_hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum,
++			(_hcd->core_if->hfnum_7_samples > 0) ?
++			_hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0);
++	DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %u, avg %u\n",
++			_hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum,
++			(_hcd->core_if->hfnum_0_samples > 0) ?
++			_hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0);
++	DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %u, avg %u\n",
++			_hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum,
++			(_hcd->core_if->hfnum_other_samples > 0) ?
++			_hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a,
++			(_hcd->hfnum_7_samples_a > 0) ?
++			_hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0);
++	DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a,
++			(_hcd->hfnum_0_samples_a > 0) ?
++			_hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0);
++	DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a,
++			(_hcd->hfnum_other_samples_a > 0) ?
++			_hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0);
++
++	DWC_PRINT("\n");
++	DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b,
++			(_hcd->hfnum_7_samples_b > 0) ?
++			_hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0);
++	DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b,
++			(_hcd->hfnum_0_samples_b > 0) ?
++			_hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0);
++	DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
++	DWC_PRINT("  samples %u, accum %llu, avg %llu\n",
++			_hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b,
++			(_hcd->hfnum_other_samples_b > 0) ?
++			_hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0);
++#endif
++#endif	
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd)
++{
++#ifdef DEBUG
++	int num_channels;
++	int i;
++	gnptxsts_data_t	np_tx_status;
++	hptxsts_data_t p_tx_status;
++
++	num_channels = _hcd->core_if->core_params->host_channels;
++	DWC_PRINT("\n");
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("HCD State:\n");
++	DWC_PRINT("  Num channels: %d\n", num_channels);
++	for (i = 0; i < num_channels; i++) {
++		dwc_hc_t *hc = _hcd->hc_ptr_array[i];
++		DWC_PRINT("  Channel %d:\n", i);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++				hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    speed: %d\n", hc->speed);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    multi_count: %d\n", hc->multi_count);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    xfer_count: %d\n", hc->xfer_count);
++		DWC_PRINT("    halt_on_queue: %d\n", hc->halt_on_queue);
++		DWC_PRINT("    halt_pending: %d\n", hc->halt_pending);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    do_split: %d\n", hc->do_split);
++		DWC_PRINT("    complete_split: %d\n", hc->complete_split);
++		DWC_PRINT("    hub_addr: %d\n", hc->hub_addr);
++		DWC_PRINT("    port_addr: %d\n", hc->port_addr);
++		DWC_PRINT("    xact_pos: %d\n", hc->xact_pos);
++		DWC_PRINT("    requests: %d\n", hc->requests);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		if (hc->xfer_started) {
++			hfnum_data_t hfnum;
++			hcchar_data_t hcchar;
++			hctsiz_data_t hctsiz;
++			hcint_data_t hcint;
++			hcintmsk_data_t hcintmsk;
++			hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
++			hcchar.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcchar);
++			hctsiz.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hctsiz);
++			hcint.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcint);
++			hcintmsk.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcintmsk);
++			DWC_PRINT("    hfnum: 0x%08x\n", hfnum.d32);
++			DWC_PRINT("    hcchar: 0x%08x\n", hcchar.d32);
++			DWC_PRINT("    hctsiz: 0x%08x\n", hctsiz.d32);
++			DWC_PRINT("    hcint: 0x%08x\n", hcint.d32);
++			DWC_PRINT("    hcintmsk: 0x%08x\n", hcintmsk.d32);
++		}
++		if (hc->xfer_started && (hc->qh != NULL) && (hc->qh->qtd_in_process != NULL)) {
++			dwc_otg_qtd_t *qtd;
++			struct urb *urb;
++			qtd = hc->qh->qtd_in_process;
++			urb = qtd->urb;
++			DWC_PRINT("    URB Info:\n");
++			DWC_PRINT("      qtd: %p, urb: %p\n", qtd, urb);
++			if (urb != NULL) {
++				DWC_PRINT("      Dev: %d, EP: %d %s\n",
++						usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
++						usb_pipein(urb->pipe) ? "IN" : "OUT");
++				DWC_PRINT("      Max packet size: %d\n",
++						usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++				DWC_PRINT("      transfer_buffer: %p\n", urb->transfer_buffer);
++				DWC_PRINT("      transfer_dma: %p\n", (void *)urb->transfer_dma);
++				DWC_PRINT("      transfer_buffer_length: %d\n", urb->transfer_buffer_length);
++				DWC_PRINT("      actual_length: %d\n", urb->actual_length);
++			}
++		}
++	}
++	//DWC_PRINT("  non_periodic_channels: %d\n", _hcd->non_periodic_channels);
++	//DWC_PRINT("  periodic_channels: %d\n", _hcd->periodic_channels);
++	DWC_PRINT("  available_channels: %d\n", _hcd->available_host_channels);
++	DWC_PRINT("  periodic_usecs: %d\n", _hcd->periodic_usecs);
++	np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts);
++	DWC_PRINT("  NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
++	DWC_PRINT("  NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
++	p_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts);
++	DWC_PRINT("  P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
++	DWC_PRINT("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++	dwc_otg_hcd_dump_frrem(_hcd);
++	dwc_otg_dump_global_registers(_hcd->core_if);
++	dwc_otg_dump_host_registers(_hcd->core_if);
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("\n");
++#endif
++}
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+@@ -0,0 +1,676 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#if !defined(__DWC_HCD_H__)
++#define __DWC_HCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++#include <linux/usb/hcd.h>
++
++struct lm_device;
++struct dwc_otg_device;
++
++#include "dwc_otg_cil.h"
++//#include "dwc_otg_ifx.h" // winder
++
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++	DWC_OTG_CONTROL_SETUP,
++	DWC_OTG_CONTROL_DATA,
++	DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++	DWC_OTG_TRANSACTION_NONE,
++	DWC_OTG_TRANSACTION_PERIODIC,
++	DWC_OTG_TRANSACTION_NON_PERIODIC,
++	DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++struct dwc_otg_qh;
++typedef struct dwc_otg_qtd {
++	/**
++	 * Determines the PID of the next data packet for the data phase of
++	 * control transfers. Ignored for other transfer types.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Current phase for control transfers (Setup, Data, or Status). */
++	dwc_otg_control_phase_e	control_phase;
++
++	/** Keep track of the current split type
++	 * for FS/LS endpoints on a HS Hub */
++	uint8_t                 complete_split;
++
++	/** How many bytes transferred during SSPLIT OUT */
++	uint32_t                ssplit_out_xfer_count;
++
++	/**
++	 * Holds the number of bus errors that have occurred for a transaction
++	 * within this transfer.
++	 */
++	uint8_t 		error_count;
++
++	/**
++	 * Index of the next frame descriptor for an isochronous transfer. A
++	 * frame descriptor describes the buffer position and length of the
++	 * data to be transferred in the next scheduled (micro)frame of an
++	 * isochronous transfer. It also holds status for that transaction.
++	 * The frame index starts at 0.
++	 */
++	int			isoc_frame_index;
++
++	/** Position of the ISOC split on full/low speed */
++	uint8_t                 isoc_split_pos;
++
++	/** Position of the ISOC split in the buffer for the current frame */
++	uint16_t                isoc_split_offset;
++
++	/** URB for this transfer */
++	struct urb 		*urb;
++
++	/** This list of QTDs */
++	struct list_head  	qtd_list_entry;
++
++	/* Field to track the qh pointer */
++	struct dwc_otg_qh *qtd_qh_ptr;
++} dwc_otg_qtd_t;
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 * 	- USB_ENDPOINT_XFER_CONTROL
++	 *	- USB_ENDPOINT_XFER_ISOC
++	 *	- USB_ENDPOINT_XFER_BULK
++	 *	- USB_ENDPOINT_XFER_INT
++	 */
++	uint8_t 		ep_type;
++	uint8_t 		ep_is_in;
++
++	/** wMaxPacketSize Field of Endpoint Descriptor. */
++	uint16_t		maxp;
++
++	/**
++	 * Determines the PID of the next data packet for non-control
++	 * transfers. Ignored for control transfers.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 * 	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Ping state if 1. */
++	uint8_t 		ping_state;
++
++	/**
++	 * List of QTDs for this QH.
++	 */
++	struct list_head 	qtd_list;
++
++	/** Host channel currently processing transfers for this QH. */
++	dwc_hc_t		*channel;
++
++	/** QTD currently assigned to a host channel for this QH. */
++	dwc_otg_qtd_t		*qtd_in_process;
++
++	/** Full/low speed endpoint on high-speed hub requires split. */
++	uint8_t                 do_split;
++
++	/** @name Periodic schedule information */
++	/** @{ */
++
++	/** Bandwidth in microseconds per (micro)frame. */
++	uint8_t			usecs;
++
++	/** Interval between transfers in (micro)frames. */
++	uint16_t		interval;
++
++	/**
++	 * (micro)frame to initialize a periodic transfer. The transfer
++	 * executes in the following (micro)frame.
++	 */
++	uint16_t		sched_frame;
++
++	/** (micro)frame at which last start split was initialized. */
++	uint16_t		start_split_frame;
++
++	/** @} */
++
++	uint16_t speed;
++	uint16_t frame_usecs[8];
++	/** Entry for QH in either the periodic or non-periodic schedule. */
++	struct list_head        qh_list_entry;
++} dwc_otg_qh_t;
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++typedef struct dwc_otg_hcd {
++	spinlock_t		lock;
++
++	/** DWC OTG Core Interface Layer */
++	dwc_otg_core_if_t       *core_if;
++
++	/** Internal DWC HCD Flags */	
++	volatile union dwc_otg_hcd_internal_flags {
++		uint32_t d32;
++		struct {
++			unsigned port_connect_status_change : 1;
++			unsigned port_connect_status : 1;
++			unsigned port_reset_change : 1;
++			unsigned port_enable_change : 1;
++			unsigned port_suspend_change : 1;
++			unsigned port_over_current_change : 1;
++			unsigned reserved : 27;
++		} b;
++	} flags;
++
++	/**
++	 * Inactive items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 */
++	struct list_head 	non_periodic_sched_inactive;
++
++	/**
++	 * Deferred items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 * When we get an NAK, the QH goes here.
++	 */
++	struct list_head 	non_periodic_sched_deferred;
++
++	/**
++	 * Active items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are
++	 * currently assigned to a host channel.
++	 */
++	struct list_head 	non_periodic_sched_active;
++
++	/**
++	 * Pointer to the next Queue Head to process in the active
++	 * non-periodic schedule.
++	 */
++	struct list_head 	*non_periodic_qh_ptr;
++
++	/**
++	 * Inactive items in the periodic schedule. This is a list of QHs for
++	 * periodic transfers that are _not_ scheduled for the next frame.
++	 * Each QH in the list has an interval counter that determines when it
++	 * needs to be scheduled for execution. This scheduling mechanism
++	 * allows only a simple calculation for periodic bandwidth used (i.e.
++	 * must assume that all periodic transfers may need to execute in the
++	 * same frame). However, it greatly simplifies scheduling and should
++	 * be sufficient for the vast majority of OTG hosts, which need to
++	 * connect to a small number of peripherals at one time.
++	 *
++	 * Items move from this list to periodic_sched_ready when the QH
++	 * interval counter is 0 at SOF.
++	 */
++	struct list_head	periodic_sched_inactive;
++
++	/**
++	 * List of periodic QHs that are ready for execution in the next
++	 * frame, but have not yet been assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_assigned as host
++	 * channels become available during the current frame.
++	 */
++	struct list_head	periodic_sched_ready;
++
++	/**
++	 * List of periodic QHs to be executed in the next frame that are
++	 * assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_queued as the
++	 * transactions for the QH are queued to the DWC_otg controller.
++	 */
++	struct list_head	periodic_sched_assigned;
++
++	/**
++	 * List of periodic QHs that have been queued for execution.
++	 *
++	 * Items move from this list to either periodic_sched_inactive or
++	 * periodic_sched_ready when the channel associated with the transfer
++	 * is released. If the interval for the QH is 1, the item moves to
++	 * periodic_sched_ready because it must be rescheduled for the next
++	 * frame. Otherwise, the item moves to periodic_sched_inactive.
++	 */
++	struct list_head	periodic_sched_queued;
++
++	/**
++	 * Total bandwidth claimed so far for periodic transfers. This value
++	 * is in microseconds per (micro)frame. The assumption is that all
++	 * periodic transfers may occur in the same (micro)frame.
++	 */
++	uint16_t		periodic_usecs;
++
++	/**
++	 * Total bandwidth claimed so far for all periodic transfers
++	 * in a frame.
++	 * This will include a mixture of HS and FS transfers.
++	 * Units are microseconds per (micro)frame.
++	 * We have a budget per frame and have to schedule
++	 * transactions accordingly.
++	 * Watch out for the fact that things are actually scheduled for the
++	 * "next frame".
++	 */
++	uint16_t		frame_usecs[8];
++
++	/**
++	 * Frame number read from the core at SOF. The value ranges from 0 to
++	 * DWC_HFNUM_MAX_FRNUM.
++	 */
++	uint16_t		frame_number;
++
++	/**
++	 * Free host channels in the controller. This is a list of
++	 * dwc_hc_t items.
++	 */
++	struct list_head 	free_hc_list;
++
++	/**
++	 * Number of available host channels.
++	 */
++	int			available_host_channels;
++
++	/**
++	 * Array of pointers to the host channel descriptors. Allows accessing
++	 * a host channel descriptor given the host channel number. This is
++	 * useful in interrupt handlers.
++	 */
++	dwc_hc_t		*hc_ptr_array[MAX_EPS_CHANNELS];
++
++	/**
++	 * Buffer to use for any data received during the status phase of a
++	 * control transfer. Normally no data is transferred during the status
++	 * phase. This buffer is used as a bit bucket. 
++	 */
++	uint8_t			*status_buf;
++
++	/**
++	 * DMA address for status_buf.
++	 */
++	dma_addr_t		status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64	
++
++	/**
++	 * Structure to allow starting the HCD in a non-interrupt context
++	 * during an OTG role change.
++	 */
++	struct work_struct	start_work;
++	struct usb_hcd		*_p;
++
++	/**
++	 * Connection timer. An OTG host must display a message if the device
++	 * does not connect. Started when the VBus power is turned on via
++	 * sysfs attribute "buspower".
++	 */
++        struct timer_list 	conn_timer;
++
++	/* Tasket to do a reset */
++	struct tasklet_struct   *reset_tasklet;
++
++#ifdef DEBUG
++	uint32_t 		frrem_samples;
++	uint64_t 		frrem_accum;
++
++	uint32_t		hfnum_7_samples_a;
++	uint64_t		hfnum_7_frrem_accum_a;
++	uint32_t		hfnum_0_samples_a;
++	uint64_t		hfnum_0_frrem_accum_a;
++	uint32_t		hfnum_other_samples_a;
++	uint64_t		hfnum_other_frrem_accum_a;
++
++	uint32_t		hfnum_7_samples_b;
++	uint64_t		hfnum_7_frrem_accum_b;
++	uint32_t		hfnum_0_samples_b;
++	uint64_t		hfnum_0_frrem_accum_b;
++	uint32_t		hfnum_other_samples_b;
++	uint64_t		hfnum_other_frrem_accum_b;
++#endif
++
++} dwc_otg_hcd_t;
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++	return (dwc_otg_hcd_t *)(hcd->hcd_priv);
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
++}
++
++/** @name HCD Create/Destroy Functions */
++/** @{ */
++extern int  __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device);
++extern void dwc_otg_hcd_remove(struct device *_dev);
++/** @} */
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++
++extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
++
++extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, 
++				   struct urb *urb, 
++				   gfp_t mem_flags);
++extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, 
++				   struct urb *urb,
++				   int status);
++extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
++
++extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++					 struct usb_host_endpoint *ep);
++
++extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, 
++				       char *buf);
++extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, 
++				   u16 typeReq, 
++				   u16 wValue, 
++				   u16 wIndex, 
++				   char *buf, 
++				   u16 wLength);
++
++/** @} */
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
++					   dwc_otg_transaction_type_e _tr_type);
++extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *_urb,
++				     int _status);
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++/** @} */
++
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb);
++extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb);
++extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh);
++extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
++extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
++extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_csplit);
++extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int delay);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hcd_t *_hcd,
++						   dwc_otg_qh_t *_qh)
++{
++	dwc_otg_hcd_qh_remove (_hcd, _qh);
++	dwc_otg_hcd_qh_free (_qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void)
++{
++#ifdef _SC_BUILD_ 
++    return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_ATOMIC);
++#else
++	return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_KERNEL);
++#endif	
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb);
++extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb);
++extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void)
++{
++#ifdef _SC_BUILD_    
++    return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_ATOMIC);
++#else
++	return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_KERNEL);
++#endif	
++}
++
++/** Frees the memory for a QTD structure.  QTD should already be removed from
++ * list.
++ * @param[in] _qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd)
++{
++	kfree (_qtd);
++}
++
++/** Removes a QTD from list.
++ * @param[in] _qtd QTD to remove from list. */
++static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qtd)
++{
++	unsigned long flags;
++	local_irq_save (flags);
++	list_del (&_qtd->qtd_list_entry);
++	local_irq_restore (flags);
++}
++
++/** Remove and free a QTD */
++static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_qtd_t *_qtd)
++{
++	dwc_otg_hcd_qtd_remove (_qtd);
++	dwc_otg_hcd_qtd_free (_qtd);
++}
++
++/** @} */
++
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb);
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd);
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd);
++/** @} */
++
++
++/** Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *_urb)
++{
++	struct usb_device *dev = _urb->dev;
++	int ep_num = usb_pipeendpoint(_urb->pipe);
++    if (usb_pipein(_urb->pipe))
++        return dev->ep_in[ep_num];
++    else
++        return dev->ep_out[ep_num];
++}
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \
++	((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++                                                     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qh_t,qh_list_entry))
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qtd_t,qtd_list_entry))
++
++/** Check if QH is non-periodic  */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
++                                     (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t _frame2)
++{
++	return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <=
++		(DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t _frame2)
++{
++	return (_frame1 != _frame2) &&
++		(((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) <
++		 (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uint16_t _inc)
++{
++	return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num (uint16_t _frame)
++{
++	return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num (uint16_t _frame)
++{
++	return (_frame) & 0x7;
++}
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++	hfnum_data_t hfnum; \
++	dwc_otg_qtd_t *qtd; \
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++		hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++		switch (hfnum.b.frnum & 0x7) { \
++		case 7: \
++			_hcd->hfnum_7_samples_##_letter++; \
++			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		case 0: \
++			_hcd->hfnum_0_samples_##_letter++; \
++			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		default: \
++			_hcd->hfnum_other_samples_##_letter++; \
++			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		} \
++	} \
++}
++#else // DEBUG
++#define dwc_sample_frrem(_hcd, _qh, _letter) 
++#endif // DEBUG		
++#endif // __DWC_HCD_H__
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+@@ -0,0 +1,1841 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 553126 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++const int erratum_usb09_patched = 0;
++const int deferral_on = 1;
++const int nak_deferral_delay = 8;
++const int nyet_deferral_delay = 1;
++/** @file 
++ * This file contains the implementation of the HCD Interrupt handlers. 
++ */
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	int retval = 0;
++
++        dwc_otg_core_if_t *core_if = _dwc_otg_hcd->core_if;
++        gintsts_data_t gintsts;
++#ifdef DEBUG
++        dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++
++	/* Check if HOST Mode */
++        if (dwc_otg_is_host_mode(core_if)) {
++		gintsts.d32 = dwc_otg_read_core_intr(core_if);
++		if (!gintsts.d32) {
++			return 0;
++		}
++
++#ifdef DEBUG
++		/* Don't print debug message in the interrupt handler on SOF */
++#  ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++			DWC_DEBUGPL (DBG_HCD, "\n");
++#endif
++
++#ifdef DEBUG
++#  ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
++#endif
++
++                if (gintsts.b.sofintr) {
++			retval |= dwc_otg_hcd_handle_sof_intr (_dwc_otg_hcd);
++                }
++                if (gintsts.b.rxstsqlvl) {
++			retval |= dwc_otg_hcd_handle_rx_status_q_level_intr (_dwc_otg_hcd);
++                }
++                if (gintsts.b.nptxfempty) {
++			retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr (_dwc_otg_hcd);
++		}
++                if (gintsts.b.i2cintr) {
++			/** @todo Implement i2cintr handler. */
++                }
++		if (gintsts.b.portintr) {
++			retval |= dwc_otg_hcd_handle_port_intr (_dwc_otg_hcd);
++		}
++		if (gintsts.b.hcintr) {
++			retval |= dwc_otg_hcd_handle_hc_intr (_dwc_otg_hcd);
++		}
++		if (gintsts.b.ptxfempty) {
++			retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (_dwc_otg_hcd);
++		}
++#ifdef DEBUG
++#  ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++		{
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintsts));
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintmsk));                
++		}
++#endif
++
++#ifdef DEBUG
++#  ifndef DEBUG_SOF
++	if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#  endif
++		DWC_DEBUGPL (DBG_HCD, "\n");
++#endif
++
++	}
++
++	return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t _curr_frame_number) {
++	static uint16_t		frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static uint16_t		last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static int		frame_num_idx = 0;
++	static uint16_t		last_frame_num = DWC_HFNUM_MAX_FRNUM;
++	static int		dumped_frame_num_array = 0;
++	
++	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++		if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != _curr_frame_number)) {
++			frame_num_array[frame_num_idx] = _curr_frame_number;
++			last_frame_num_array[frame_num_idx++] = last_frame_num;
++		}
++	} else if (!dumped_frame_num_array) {
++		int i;
++		printk(KERN_EMERG USB_DWC "Frame     Last Frame\n");
++		printk(KERN_EMERG USB_DWC "-----     ----------\n");
++		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++			printk(KERN_EMERG USB_DWC "0x%04x    0x%04x\n",
++			       frame_num_array[i], last_frame_num_array[i]);
++		}
++		dumped_frame_num_array = 1;
++	}
++	last_frame_num = _curr_frame_number;
++}
++#endif	
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_hcd)
++{
++	hfnum_data_t		hfnum;
++	struct list_head 	*qh_entry;
++	dwc_otg_qh_t 		*qh;
++	dwc_otg_transaction_type_e tr_type;
++	gintsts_data_t gintsts = {.d32 = 0};
++
++	hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++
++	_hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++	_hcd->frrem_accum += hfnum.b.frrem;
++	_hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++	track_missed_sofs(_hcd->frame_number);
++#endif	
++
++	/* Determine whether any periodic QHs should be executed. */
++	qh_entry = _hcd->periodic_sched_inactive.next;
++	while (qh_entry != &_hcd->periodic_sched_inactive) {
++		qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
++		qh_entry = qh_entry->next;
++		if (dwc_frame_num_le(qh->sched_frame, _hcd->frame_number)) {
++			/* 
++			 * Move QH to the ready list to be executed next
++			 * (micro)frame.
++			 */
++			list_move(&qh->qh_list_entry, &_hcd->periodic_sched_ready);
++		}
++	}
++
++	tr_type = dwc_otg_hcd_select_transactions(_hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(_hcd, tr_type);
++	}
++
++	/* Clear interrupt */
++	gintsts.b.sofintr = 1;
++	dwc_write_reg32(&_hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	host_grxsts_data_t grxsts;
++	dwc_hc_t *hc = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++	grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++	hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++
++	/* Packet Status */
++	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
++	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
++	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
++	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
++	
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer. */
++		if (grxsts.b.bcnt > 0) {
++			dwc_otg_read_packet(_dwc_otg_hcd->core_if, 
++					    hc->xfer_buff, 
++					    grxsts.b.bcnt);
++
++			/* Update the HC fields for the next packet received. */
++			hc->xfer_count += grxsts.b.bcnt;
++			hc->xfer_buff += grxsts.b.bcnt;
++		}
++		
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++	case DWC_GRXSTS_PKTSTS_CH_HALTED:
++		/* Handled in interrupt, just ignore data */
++		break;
++	default:
++		DWC_ERROR ("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
++		break;
++	}
++	
++	return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_NON_PERIODIC);
++	return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");	
++	dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_PERIODIC);
++	return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
++	hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0; 
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0; 
++
++	/* Port Connect Detected 
++	 * Set flag and clear if detected */
++	if (hprt0.b.prtconndet) {
++		DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++			    "Port Connect Detected--\n", hprt0.d32);
++		_dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++		_dwc_otg_hcd->flags.b.port_connect_status = 1;
++		hprt0_modify.b.prtconndet = 1;
++
++                /* B-Device has connected, Delete the connection timer.  */
++                del_timer( &_dwc_otg_hcd->conn_timer );
++
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1) {
++			int do_reset = 0;
++			dwc_otg_core_params_t *params = _dwc_otg_hcd->core_if->core_params;
++			dwc_otg_core_global_regs_t *global_regs = _dwc_otg_hcd->core_if->core_global_regs;
++			dwc_otg_host_if_t *host_if = _dwc_otg_hcd->core_if->host_if;
++
++			/* Check if we need to adjust the PHY clock speed for
++			 * low power and adjust it */
++			if (params->host_support_fs_ls_low_power)
++			{
++				gusbcfg_data_t usbcfg;
++
++				usbcfg.d32 = dwc_read_reg32 (&global_regs->gusbcfg);
++
++				if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ||
++				    (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED))
++				{
++					/* 
++					 * Low power 
++					 */
++					hcfg_data_t hcfg;
++					if (usbcfg.b.phylpwrclksel == 0) {
++						/* Set PHY low power clock select for FS/LS devices */
++						usbcfg.b.phylpwrclksel = 1;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++
++					hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++
++					if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) && 
++					    (params->host_ls_low_power_phy_clk ==
++					     DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ))
++					{
++						/* 6 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					}
++					else {
++						/* 48 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					}
++				}
++				else {
++					/* 
++					 * Not low power 
++					 */
++					if (usbcfg.b.phylpwrclksel == 1) {
++						usbcfg.b.phylpwrclksel = 0;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++				}
++
++				if (do_reset) {
++					tasklet_schedule(_dwc_otg_hcd->reset_tasklet);
++				}
++			}
++			
++			if (!do_reset) {
++				/* Port has been enabled set the reset change flag */
++				_dwc_otg_hcd->flags.b.port_reset_change = 1;
++			}
++
++		} else {
++			_dwc_otg_hcd->flags.b.port_enable_change = 1;
++		}
++		retval |= 1;
++	}
++
++	/** Overcurrent Change Interrupt */
++	if (hprt0.b.prtovrcurrchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		_dwc_otg_hcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1; 
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++	return retval;
++}
++
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++	int i;
++	int retval = 0;
++	haint_data_t haint;
++
++	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
++	 * GINTSTS */
++
++	haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_hcd->core_if);
++
++	for (i=0; i<_dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++		if (haint.b2.chint & (1 << i)) {
++			retval |= dwc_otg_hcd_handle_hc_n_intr (_dwc_otg_hcd, i);
++		}
++	}
++
++	return retval;
++}
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_,_intr_) \
++do { \
++	hcint_data_t hcint_clear = {.d32 = 0}; \
++	hcint_clear.b._intr_ = 1; \
++	dwc_write_reg32(&((_hc_regs_)->hcint), hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_,_intr_) \
++do { \
++	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++	hcintmsk.b._intr_ = 1; \
++	dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COMPLETE, 
++ * *_short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *_short_read is set to 0 upon
++ * return. _short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       dwc_otg_qtd_t *_qtd,
++				       dwc_otg_halt_status_e _halt_status,
++				       int *_short_read)
++{
++	hctsiz_data_t 	hctsiz;
++	uint32_t 	length;
++
++	if (_short_read != NULL) {
++		*_short_read = 0;
++	}
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++
++	if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		if (_hc->ep_is_in) {
++			length = _hc->xfer_len - hctsiz.b.xfersize;
++			if (_short_read != NULL) {
++				*_short_read = (hctsiz.b.xfersize != 0);
++			}
++		} else if (_hc->qh->do_split) {
++			length = _qtd->ssplit_out_xfer_count;
++		} else {
++			length = _hc->xfer_len;
++		}
++	} else {
++		/*
++		 * Must use the hctsiz.pktcnt field to determine how much data
++		 * has been transferred. This field reflects the number of
++		 * packets that have been transferred via the USB. This is
++		 * always an integral number of packets if the transfer was
++		 * halted before its normal completion. (Can't use the
++		 * hctsiz.xfersize field because that reflects the number of
++		 * bytes transferred via the AHB, not the USB).
++		 */
++		length = (_hc->start_pkt_count - hctsiz.b.pktcnt) * _hc->max_packet;
++	}
++
++	return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished. 
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t *_hc,
++				      dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb,
++				      dwc_otg_qtd_t * _qtd, int *status)
++{
++	int 		xfer_done = 0;
++	int 		short_read = 0;
++
++	_urb->actual_length += get_actual_xfer_length(_hc, _hc_regs, _qtd,
++						      DWC_OTG_HC_XFER_COMPLETE,
++						      &short_read);
++
++	if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) {
++		xfer_done = 1;
++		if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) {
++			*status = -EREMOTEIO;
++		} else {
++			*status = 0;
++		}
++	}
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t 	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", _hc->xfer_len);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    _urb->transfer_buffer_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", _urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
++			    short_read, xfer_done);
++	}
++#endif
++
++	return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++static void save_data_toggle(dwc_hc_t *_hc,
++			     dwc_otg_hc_regs_t *_hc_regs,
++			     dwc_otg_qtd_t *_qtd)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++
++	if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++		dwc_otg_qh_t *qh = _hc->qh;
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	} else {
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			_qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			_qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	}
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t *_hcd,
++			  dwc_otg_qh_t *_qh,
++			  int free_qtd)
++{
++	int continue_split = 0;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, _hcd, _qh, free_qtd);
++
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	if (qtd->complete_split) {
++		continue_split = 1;
++	} 
++	else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID) ||
++		 (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END))
++	{
++		continue_split = 1;
++	}
++
++	if (free_qtd) {
++		/*
++		 * Note that this was previously a call to
++		 * dwc_otg_hcd_qtd_remove_and_free(qtd), which frees the qtd.
++		 * However, that call frees the qtd memory, and we continue in the
++		 * interrupt logic to access it many more times, including writing
++		 * to it.  With slub debugging on, it is clear that we were writing
++		 * to memory we had freed.
++		 * Call this instead, and now I have moved the freeing of the memory to
++		 * the end of processing this interrupt.
++		 */
++		//dwc_otg_hcd_qtd_remove_and_free(qtd);
++		dwc_otg_hcd_qtd_remove(qtd);
++		
++		continue_split = 0;
++	}
++
++	_qh->channel = NULL;
++	_qh->qtd_in_process = NULL;
++	dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split);
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t *_hcd,
++		      dwc_hc_t *_hc,
++		      dwc_otg_hc_regs_t *_hc_regs,
++		      dwc_otg_qtd_t *_qtd,
++		      dwc_otg_halt_status_e _halt_status)
++{
++	struct urb *urb = _qtd->urb;
++	dwc_otg_halt_status_e ret_val = _halt_status;
++	struct usb_iso_packet_descriptor *frame_desc;
++
++	frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_index];
++	switch (_halt_status) {
++	case DWC_OTG_HC_XFER_COMPLETE:
++		frame_desc->status = 0;
++		frame_desc->actual_length =
++			get_actual_xfer_length(_hc, _hc_regs, _qtd,
++					       _halt_status, NULL);
++		break;
++	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++		urb->error_count++;
++		if (_hc->ep_is_in) {
++			frame_desc->status = -ENOSR;
++		} else {
++			frame_desc->status = -ECOMM;
++		}
++		frame_desc->actual_length = 0;
++		break;
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		urb->error_count++;
++		frame_desc->status = -EOVERFLOW;
++		/* Don't need to update actual_length in this case. */
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		urb->error_count++;
++		frame_desc->status = -EPROTO;
++		frame_desc->actual_length =
++			get_actual_xfer_length(_hc, _hc_regs, _qtd,
++					       _halt_status, NULL);
++	default:
++		DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
++			  _halt_status);
++		BUG();
++		break;
++	}
++
++	if (++_qtd->isoc_frame_index == urb->number_of_packets) {
++		/*
++		 * urb->status is not used for isoc transfers. 
++		 * The individual frame_desc statuses are used instead.
++		 */
++		dwc_otg_hcd_complete_urb(_hcd, urb, 0);
++		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++	} else {
++		ret_val = DWC_OTG_HC_XFER_COMPLETE;
++	}
++
++	return ret_val;
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _hc The host channel to release.
++ * @param _qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param _halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t *_hcd,
++			    dwc_hc_t *_hc,
++			    dwc_otg_qtd_t *_qtd,
++			    dwc_otg_halt_status_e _halt_status,
++				int *must_free)
++{
++	dwc_otg_transaction_type_e tr_type;
++	int free_qtd;
++	dwc_otg_qh_t * _qh;
++	int deact = 1;
++	int retry_delay = 1;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d\n", __func__,
++		      _hc->hc_num, _halt_status);
++
++	switch (_halt_status) {
++	case DWC_OTG_HC_XFER_NYET:
++	case DWC_OTG_HC_XFER_NAK:
++		if (_halt_status == DWC_OTG_HC_XFER_NYET) {
++			retry_delay = nyet_deferral_delay;
++		} else {
++			retry_delay = nak_deferral_delay;
++		}
++		free_qtd = 0;
++		if (deferral_on && _hc->do_split) {
++			_qh = _hc->qh;
++			if (_qh) {
++				deact = dwc_otg_hcd_qh_deferr(_hcd, _qh , retry_delay);
++			}
++		}
++	        break;
++	case DWC_OTG_HC_XFER_URB_COMPLETE:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_AHB_ERR:
++	case DWC_OTG_HC_XFER_STALL:
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		if (_qtd->error_count >= 3) {
++			DWC_DEBUGPL(DBG_HCDV, "  Complete URB with transaction error\n");
++			free_qtd = 1;
++			//_qtd->urb->status = -EPROTO;
++			dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPROTO);
++		} else {
++			free_qtd = 0;
++		}
++		break;
++	case DWC_OTG_HC_XFER_URB_DEQUEUE:
++		/*
++		 * The QTD has already been removed and the QH has been
++		 * deactivated. Don't want to do anything except release the
++		 * host channel and try to queue more transfers.
++		 */
++		goto cleanup;
++	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++		DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num);
++		free_qtd = 0;
++		break;
++	default:
++		free_qtd = 0;
++		break;
++	}
++	if (free_qtd) {
++		/* Only change must_free to true (do not set to zero here -- it is
++		 * pre-initialized to zero).
++		 */
++		*must_free = 1;
++	}
++	if (deact) {
++	deactivate_qh(_hcd, _hc->qh, free_qtd);
++	}
++ cleanup:
++	/*
++	 * Release the host channel for use by other transfers. The cleanup
++	 * function clears the channel interrupt enables and conditions, so
++	 * there's no need to clear the Channel Halted interrupt separately.
++	 */
++	dwc_otg_hc_cleanup(_hcd->core_if, _hc);
++	list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list);
++
++	local_irq_save(flags);
++	_hcd->available_host_channels++;
++	local_irq_restore(flags);
++	/* Try to queue more transfers now that there's a free channel, */
++	/* unless erratum_usb09_patched is set */
++	if (!erratum_usb09_patched) {
++	tr_type = dwc_otg_hcd_select_transactions(_hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(_hcd, tr_type);
++		}
++	}
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t *_hcd,
++			 dwc_hc_t *_hc,
++			 dwc_otg_qtd_t *_qtd,
++			 dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++	if (_hcd->core_if->dma_enable) {
++		release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++		return;
++	}
++
++	/* Slave mode processing... */
++	dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status);
++
++	if (_hc->halt_on_queue) {
++		gintmsk_data_t gintmsk = {.d32 = 0};
++		dwc_otg_core_global_regs_t *global_regs;
++		global_regs = _hcd->core_if->core_global_regs;
++
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			/*
++			 * Make sure the Non-periodic Tx FIFO empty interrupt
++			 * is enabled so that the non-periodic schedule will
++			 * be processed.
++			 */
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		} else {
++			/*
++			 * Move the QH from the periodic queued schedule to
++			 * the periodic assigned schedule. This allows the
++			 * halt to be queued when the periodic schedule is
++			 * processed.
++			 */
++			list_move(&_hc->qh->qh_list_entry,
++				  &_hcd->periodic_sched_assigned);
++
++			/*
++			 * Make sure the Periodic Tx FIFO Empty interrupt is
++			 * enabled so that the periodic schedule will be
++			 * processed.
++			 */
++			gintmsk.b.ptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		}
++	}
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t *_hcd,
++				       dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       dwc_otg_qtd_t *_qtd,
++				       dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++	hcint_data_t hcint;
++
++	_qtd->error_count = 0;
++
++	hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++	if (hcint.b.nyet) {
++		/*
++		 * Got a NYET on the last transaction of the transfer. This
++		 * means that the endpoint should be in the PING state at the
++		 * beginning of the next transfer.
++		 */
++		_hc->qh->ping_state = 1;
++		clear_hc_int(_hc_regs,nyet);
++	}
++
++	/*
++	 * Always halt and release the host channel to make it available for
++	 * more transfers. There may still be more phases for a control
++	 * transfer or more data packets for a bulk transfer at this point,
++	 * but the host channel is still halted. A channel will be reassigned
++	 * to the transfer when the non-periodic schedule is processed after
++	 * the channel is released. This allows transactions to be queued
++	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
++	 * Tx FIFO Empty interrupt if necessary.
++	 */
++	if (_hc->ep_is_in) {
++		/*
++		 * IN transfers in Slave mode require an explicit disable to
++		 * halt the channel. (In DMA mode, this call simply releases
++		 * the channel.)
++		 */
++	    halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	} else {
++		/*
++		 * The channel is automatically disabled by the core for OUT
++		 * transfers in Slave mode.
++		 */
++	    release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	}
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t *_hcd,
++				   dwc_hc_t *_hc,
++				   dwc_otg_hc_regs_t *_hc_regs,
++				   dwc_otg_qtd_t *_qtd,
++				   dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++	hctsiz_data_t hctsiz;
++	_qtd->error_count = 0;
++		
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++	if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++		/* Core halts channel in these cases. */
++	    release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	} else {
++		/* Flush any outstanding requests from the Tx queue. */
++	    halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++	}
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *_hcd,
++				       dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	int 			urb_xfer_done;
++	dwc_otg_halt_status_e 	halt_status = DWC_OTG_HC_XFER_COMPLETE;
++	struct urb 		*urb = _qtd->urb;
++	int 			pipe_type = usb_pipetype(urb->pipe);
++	int status = -EINPROGRESS;
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transfer Complete--\n", _hc->hc_num);
++
++     	/* 
++	 * Handle xfer complete on CSPLIT.
++	 */
++	if (_hc->qh->do_split) {
++		_qtd->complete_split = 0;
++	}
++
++	/* Update the QTD and URB states. */
++	switch (pipe_type) {
++	case PIPE_CONTROL:
++		switch (_qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			if (urb->transfer_buffer_length > 0) {
++				_qtd->control_phase = DWC_OTG_CONTROL_DATA;
++			} else {
++				_qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++			}
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		case DWC_OTG_CONTROL_DATA: {
++			urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs,urb, _qtd, &status);
++			if (urb_xfer_done) {
++				_qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++				DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
++			} else {
++				save_data_toggle(_hc, _hc_regs, _qtd);
++			}
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		}
++		case DWC_OTG_CONTROL_STATUS:
++			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
++			if (status == -EINPROGRESS) {
++				status = 0;
++			}
++			dwc_otg_hcd_complete_urb(_hcd, urb, status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++			break;
++		}
++
++		complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
++					     halt_status, must_free);
++		break;
++	case PIPE_BULK:
++		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++		urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
++		if (urb_xfer_done) {
++			dwc_otg_hcd_complete_urb(_hcd, urb, status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++			
++		save_data_toggle(_hc, _hc_regs, _qtd);
++		complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,halt_status, must_free);
++		break;
++	case PIPE_INTERRUPT:
++		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
++		update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
++
++		/*
++		 * Interrupt URB is done on the first transfer complete
++		 * interrupt.
++		 */
++	    dwc_otg_hcd_complete_urb(_hcd, urb, status);
++		save_data_toggle(_hc, _hc_regs, _qtd);
++		complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
++					DWC_OTG_HC_XFER_URB_COMPLETE, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		DWC_DEBUGPL(DBG_HCDV,  "  Isochronous transfer complete\n");
++		if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL)
++		{
++			halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++							    DWC_OTG_HC_XFER_COMPLETE);
++		}
++		complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, halt_status, must_free);
++		break;
++	}
++
++        disable_hc_int(_hc_regs,xfercompl);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *_hcd,
++				    dwc_hc_t *_hc,
++				    dwc_otg_hc_regs_t *_hc_regs,
++				    dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	struct urb *urb = _qtd->urb;
++	int pipe_type = usb_pipetype(urb->pipe);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "STALL Received--\n", _hc->hc_num);
++
++	if (pipe_type == PIPE_CONTROL) {
++		dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
++	}
++
++	if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
++		dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
++		/*
++		 * USB protocol requires resetting the data toggle for bulk
++		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++		 * setup command is issued to the endpoint. Anticipate the
++		 * CLEAR_FEATURE command since a STALL has occurred and reset
++		 * the data toggle now.
++		 */
++		_hc->qh->data_toggle = 0;
++	}
++
++	halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, must_free);
++	disable_hc_int(_hc_regs,stall);
++
++	return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t *_hc,
++				       dwc_otg_hc_regs_t *_hc_regs,
++				       struct urb *_urb,
++				       dwc_otg_qtd_t *_qtd,
++				       dwc_otg_halt_status_e _halt_status)
++{
++	uint32_t bytes_transferred = get_actual_xfer_length(_hc, _hc_regs, _qtd,
++							    _halt_status, NULL);
++	_urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t 	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  _hc->start_pkt_count %d\n", _hc->start_pkt_count);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++		DWC_DEBUGPL(DBG_HCDV, "  _hc->max_packet %d\n", _hc->max_packet);
++		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n", bytes_transferred);
++		DWC_DEBUGPL(DBG_HCDV, "  _urb->actual_length %d\n", _urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  _urb->transfer_buffer_length %d\n",
++			    _urb->transfer_buffer_length);
++	}
++#endif	
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *_hcd,
++				  dwc_hc_t *_hc,
++				  dwc_otg_hc_regs_t *_hc_regs,
++				  dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NAK Received--\n", _hc->hc_num);
++
++	/*
++	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++	 * interrupt.  Re-start the SSPLIT transfer.
++	 */
++	if (_hc->do_split) {
++		if (_hc->complete_split) {
++			_qtd->error_count = 0;
++		}
++		_qtd->complete_split = 0;
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++		goto handle_nak_done;
++	}
++
++	switch (usb_pipetype(_qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		if (_hcd->core_if->dma_enable && _hc->ep_is_in) {
++			/*
++			 * NAK interrupts are enabled on bulk/control IN
++			 * transfers in DMA mode for the sole purpose of
++			 * resetting the error count after a transaction error
++			 * occurs. The core will continue transferring data.
++			 */
++			_qtd->error_count = 0;
++			goto handle_nak_done;
++		}
++
++		/*
++		 * NAK interrupts normally occur during OUT transfers in DMA
++		 * or Slave mode. For IN transfers, more requests will be
++		 * queued as request queue space is available.
++		 */
++		_qtd->error_count = 0;
++
++		if (!_hc->qh->ping_state) {
++			update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
++						   _qtd, DWC_OTG_HC_XFER_NAK);
++			save_data_toggle(_hc, _hc_regs, _qtd);
++			if (_qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				_hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will
++		 * start/continue. 
++		 */
++	    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++		break;
++	case PIPE_INTERRUPT:
++		_qtd->error_count = 0;
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		/* Should never get called for isochronous transfers. */
++		BUG();
++		break;
++	}
++
++ handle_nak_done:
++	disable_hc_int(_hc_regs,nak);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "ACK Received--\n", _hc->hc_num);
++
++	if (_hc->do_split) {
++		/*
++		 * Handle ACK on SSPLIT.
++		 * ACK should not occur in CSPLIT.
++		 */
++		if ((!_hc->ep_is_in) && (_hc->data_pid_start != DWC_OTG_HC_PID_SETUP)) {
++			_qtd->ssplit_out_xfer_count = _hc->xfer_len;
++		}
++		if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !_hc->ep_is_in)) {
++			/* Don't need complete for isochronous out transfers. */
++			_qtd->complete_split = 1;
++		}
++
++		/* ISOC OUT */
++		if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_hc->ep_is_in) {
++			switch (_hc->xact_pos) {
++			case DWC_HCSPLIT_XACTPOS_ALL:
++				break;
++			case DWC_HCSPLIT_XACTPOS_END:
++				_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				_qtd->isoc_split_offset = 0;
++				break;
++			case DWC_HCSPLIT_XACTPOS_BEGIN:
++			case DWC_HCSPLIT_XACTPOS_MID: 
++				/*
++				 * For BEGIN or MID, calculate the length for
++				 * the next microframe to determine the correct
++				 * SSPLIT token, either MID or END.
++				 */
++				do {
++					struct usb_iso_packet_descriptor *frame_desc;
++
++					frame_desc = &_qtd->urb->iso_frame_desc[_qtd->isoc_frame_index];
++					_qtd->isoc_split_offset += 188;
++
++					if ((frame_desc->length - _qtd->isoc_split_offset) <= 188) {
++						_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
++					}
++					else {
++						_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
++					}
++					
++				} while(0);
++				break;
++			}
++		} else {
++			halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
++		}
++	} else {
++		_qtd->error_count = 0;
++
++		if (_hc->qh->ping_state) {
++			_hc->qh->ping_state = 0;
++			/*
++			 * Halt the channel so the transfer can be re-started
++			 * from the appropriate point. This only happens in
++			 * Slave mode. In DMA mode, the ping_state is cleared
++			 * when the transfer is started because the core
++			 * automatically executes the PING, then the transfer.
++			 */
++		    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
++		} else {
++		    halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		}
++	}
++
++	/*
++	 * If the ACK occurred when _not_ in the PING state, let the channel
++	 * continue transferring data after clearing the error count.
++	 */
++
++	disable_hc_int(_hc_regs,ack);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *_hcd,
++				   dwc_hc_t *_hc,
++				   dwc_otg_hc_regs_t *_hc_regs,
++				   dwc_otg_qtd_t *_qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NYET Received--\n", _hc->hc_num);
++
++	/*
++	 * NYET on CSPLIT
++	 * re-do the CSPLIT immediately on non-periodic
++	 */
++	if ((_hc->do_split) && (_hc->complete_split)) {
++		if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) || 
++		    (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
++			int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++
++			if (dwc_full_frame_num(frnum) !=
++			    dwc_full_frame_num(_hc->qh->sched_frame)) {
++				/*
++				 * No longer in the same full speed frame.
++				 * Treat this as a transaction error.
++				 */
++#if 0
++				/** @todo Fix system performance so this can
++				 * be treated as an error. Right now complete
++				 * splits cannot be scheduled precisely enough
++				 * due to other system activity, so this error
++				 * occurs regularly in Slave mode.
++				 */
++				_qtd->error_count++;
++#endif				
++				_qtd->complete_split = 0;
++				halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++				/** @todo add support for isoc release */
++				goto handle_nyet_done;
++			}
++		}
++
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
++		goto handle_nyet_done;
++	}
++
++	_hc->qh->ping_state = 1;
++	_qtd->error_count = 0;
++
++	update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, _qtd,
++				   DWC_OTG_HC_XFER_NYET);
++	save_data_toggle(_hc, _hc_regs, _qtd);
++
++	/*
++	 * Halt the channel and re-start the transfer so the PING
++	 * protocol will start.
++	 */
++    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
++
++handle_nyet_done:
++	disable_hc_int(_hc_regs,nyet);
++	clear_hc_int(_hc_regs, nyet);
++	return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Babble Error--\n", _hc->hc_num);
++	if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EOVERFLOW);
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_BABBLE_ERR, must_free);
++	} else {
++		dwc_otg_halt_status_e halt_status;
++		halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++						    DWC_OTG_HC_XFER_BABBLE_ERR);
++		halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++	}
++	disable_hc_int(_hc_regs,bblerr);
++	return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *_hcd,
++				     dwc_hc_t *_hc,
++				     dwc_otg_hc_regs_t *_hc_regs,
++				     dwc_otg_qtd_t *_qtd)
++{
++	hcchar_data_t 	hcchar;
++	hcsplt_data_t	hcsplt;
++	hctsiz_data_t 	hctsiz;
++	uint32_t	hcdma;
++	struct urb	*urb = _qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", _hc->hc_num);
++
++	hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++	hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
++	hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++	hcdma = dwc_read_reg32(&_hc_regs->hcdma);
++
++	DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num);
++	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++	DWC_ERROR("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_ERROR("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		    (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_ERROR("  Endpoint type: %s\n",
++		    ({char *pipetype;
++		    switch (usb_pipetype(urb->pipe)) {
++		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
++		    case PIPE_BULK: pipetype = "BULK"; break;
++		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++		    default: pipetype = "UNKNOWN"; break;
++		    }; pipetype;}));
++	DWC_ERROR("  Speed: %s\n",
++		    ({char *speed;
++		    switch (urb->dev->speed) {
++		    case USB_SPEED_HIGH: speed = "HIGH"; break;
++		    case USB_SPEED_FULL: speed = "FULL"; break;
++		    case USB_SPEED_LOW: speed = "LOW"; break;
++		    default: speed = "UNKNOWN"; break;
++		    }; speed;}));
++	DWC_ERROR("  Max packet size: %d\n",
++		    usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_ERROR("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->transfer_buffer, (void *)(u32)urb->transfer_dma);
++	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n", 
++		  urb->setup_packet, (void *)(u32)urb->setup_dma);
++	DWC_ERROR("  Interval: %d\n", urb->interval);
++
++	dwc_otg_hcd_complete_urb(_hcd, urb, -EIO);
++
++	/*
++	 * Force a channel halt. Don't call halt_channel because that won't
++	 * write to the HCCHARn register in DMA mode to force the halt.
++	 */
++	dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_ERR);
++
++	disable_hc_int(_hc_regs,ahberr);
++	return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transaction Error--\n", _hc->hc_num);
++
++	switch (usb_pipetype(_qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		_qtd->error_count++;
++		if (!_hc->qh->ping_state) {
++			update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
++						   _qtd, DWC_OTG_HC_XFER_XACT_ERR);
++			save_data_toggle(_hc, _hc_regs, _qtd);
++			if (!_hc->ep_is_in && _qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				_hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will start.
++		 */
++	    halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++		break;
++	case PIPE_INTERRUPT:
++		_qtd->error_count++;
++		if ((_hc->do_split) && (_hc->complete_split)) {
++			_qtd->complete_split = 0;
++		}
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++							    DWC_OTG_HC_XFER_XACT_ERR);
++							    
++			halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++		}
++		break;
++	}
++		
++
++	disable_hc_int(_hc_regs,xacterr);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Frame Overrun--\n", _hc->hc_num);
++
++	switch (usb_pipetype(_qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		break;
++	case PIPE_INTERRUPT:
++		halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN, must_free);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++							    DWC_OTG_HC_XFER_FRAME_OVERRUN);
++							    
++			halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++		}
++		break;
++	}
++
++	disable_hc_int(_hc_regs,frmovrun);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Data Toggle Error--\n", _hc->hc_num);
++
++	if (_hc->ep_is_in) {
++		_qtd->error_count = 0;
++	} else {
++		DWC_ERROR("Data Toggle Error on OUT transfer,"
++			  "channel %d\n", _hc->hc_num);
++	}
++
++	disable_hc_int(_hc_regs,datatglerr);
++
++	return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	hcsplt_data_t hcsplt;
++
++	if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++		/*
++		 * This code is here only as a check. This condition should
++		 * never happen. Ignore the halt if it does occur.
++		 */
++		hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++		hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++		hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++		hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
++		hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
++		DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
++			 "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++			 "hcint 0x%08x, hcintmsk 0x%08x, "
++			 "hcsplt 0x%08x, qtd->complete_split %d\n",
++			 __func__, _hc->hc_num, hcchar.d32, hctsiz.d32,
++			 hcint.d32, hcintmsk.d32,
++			 hcsplt.d32, _qtd->complete_split);
++
++		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++			 __func__, _hc->hc_num);
++		DWC_WARN("\n");
++		clear_hc_int(_hc_regs,chhltd);
++		return 0;
++	}
++
++	/*
++	 * This code is here only as a check. hcchar.chdis should
++	 * never be set when the halt interrupt occurs. Halt the
++	 * channel again if it does occur.
++	 */
++	hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++			 "hcchar 0x%08x, trying to halt again\n",
++			 __func__, hcchar.d32);
++		clear_hc_int(_hc_regs,chhltd);
++		_hc->halt_pending = 0;
++		halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		return 0;
++	}
++
++	return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++
++	if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++	    release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		return;
++	}
++
++	/* Read the HCINTn register to determine the cause for the halt. */
++	hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
++
++	if (hcint.b.xfercomp) {
++		/** @todo This is here because of a possible hardware bug.  Spec
++		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++		 * interrupt w/ACK bit set should occur, but I only see the
++		 * XFERCOMP bit, even with it masked out.  This is a workaround
++		 * for that behavior.  Should fix this when hardware is fixed.
++		 */
++		if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_hc->ep_is_in)) {
++			handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++		}
++		handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.stall) {
++		handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.xacterr) {
++		/*
++		 * Must handle xacterr before nak or ack. Could get a xacterr
++		 * at the same time as either of these on a BULK/CONTROL OUT
++		 * that started with a PING. The xacterr takes precedence.
++		 */
++	    handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.nyet) {
++		/*
++		 * Must handle nyet before nak or ack. Could get a nyet at the
++		 * same time as either of those on a BULK/CONTROL OUT that
++		 * started with a PING. The nyet takes precedence.
++		 */
++	    handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.bblerr) {
++		handle_hc_babble_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.frmovrun) {
++		handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.datatglerr) {
++		handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++		_hc->qh->data_toggle = 0;
++		halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++	} else if (hcint.b.nak && !hcintmsk.b.nak) {
++		/*
++		 * If nak is not masked, it's because a non-split IN transfer
++		 * is in an error state. In that case, the nak is handled by
++		 * the nak interrupt handler, not here. Handle nak here for
++		 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++		 * rewinding the buffer pointer.
++		 */
++	    handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else if (hcint.b.ack && !hcintmsk.b.ack) {
++		/*
++		 * If ack is not masked, it's because a non-split IN transfer
++		 * is in an error state. In that case, the ack is handled by
++		 * the ack interrupt handler, not here. Handle ack here for
++		 * split transfers. Start splits halt on ACK.
++		 */
++	    handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else {
++		if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * A periodic transfer halted with no other channel
++			 * interrupts set. Assume it was halted by the core
++			 * because it could not be completed in its scheduled
++			 * (micro)frame.
++			 */
++#ifdef DEBUG
++			DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++				  __func__, _hc->hc_num);
++#endif	/*  */
++		    halt_channel(_hcd, _hc, _qtd,
++					 DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free);
++		} else {
++#ifdef DEBUG
++			DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++			     "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n",
++			     __func__, _hc->hc_num, hcint.b.nyet, hcint.d32,
++				 dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts));
++#endif			
++			halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++		}
++	}
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *_hcd,
++	dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Channel Halted--\n", _hc->hc_num);
++
++	if (_hcd->core_if->dma_enable) {
++		handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free);
++	} else {
++#ifdef DEBUG
++		if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, must_free)) {
++			return 1;
++		}
++#endif	/*  */
++	    release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++	}
++
++	return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num)
++{
++	int must_free = 0;
++	int retval = 0;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	dwc_hc_t *hc;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_qtd_t *qtd;
++	
++	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
++
++	hc = _dwc_otg_hcd->hc_ptr_array[_num];
++	hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_num];
++	qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++	DWC_DEBUGPL(DBG_HCDV, "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++	hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++	if (!_dwc_otg_hcd->core_if->dma_enable) {
++		if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) {
++			hcint.b.chhltd = 0;
++		}
++	}
++
++	if (hcint.b.xfercomp) {
++		retval |= handle_hc_xfercomp_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++		/*
++		 * If NYET occurred at same time as Xfer Complete, the NYET is
++		 * handled by the Xfer Complete interrupt handler. Don't want
++		 * to call the NYET interrupt handler in this case.
++		 */
++		hcint.b.nyet = 0;
++	}
++	if (hcint.b.chhltd) {
++		retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.ahberr) {
++		retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.stall) {
++		retval |= handle_hc_stall_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.nak) {
++		retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.ack) {
++		retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.nyet) {
++		retval |= handle_hc_nyet_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.xacterr) {
++		retval |= handle_hc_xacterr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.bblerr) {
++		retval |= handle_hc_babble_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.frmovrun) {
++		retval |= handle_hc_frmovrun_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++	if (hcint.b.datatglerr) {
++		retval |= handle_hc_datatglerr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++	}
++
++	/*
++	 * Logic to free the qtd here, at the end of the hc intr
++	 * processing, if the handling of this interrupt determined
++	 * that it needs to be freed.
++	 */
++	if (must_free) {
++		/* Free the qtd here now that we are done using it. */
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+@@ -0,0 +1,794 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] _urb Holds the information about the device/endpoint that we need
++ * to initialize the QH.
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb)
++{
++	dwc_otg_qh_t *qh;
++
++	/* Allocate memory */
++	/** @todo add memflags argument */
++	qh = dwc_otg_hcd_qh_alloc ();
++	if (qh == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qh_init (_hcd, qh, _urb);
++	return qh;
++}
++
++/** Free each QTD in the QH's QTD-list then free the QH.  QH should already be
++ * removed from a list.  QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param[in] _qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh)
++{
++	dwc_otg_qtd_t *qtd;
++	struct list_head *pos;
++	unsigned long flags;
++
++	/* Free each QTD in the QTD list */
++	local_irq_save (flags);
++	for (pos = _qh->qtd_list.next;
++	     pos != &_qh->qtd_list;
++	     pos = _qh->qtd_list.next)
++	{
++		list_del (pos);
++		qtd = dwc_list_to_qtd (pos);
++		dwc_otg_hcd_qtd_free (qtd);
++	}
++	local_irq_restore (flags);
++
++	kfree (_qh);
++	return;
++}
++
++/** Initializes a QH structure.
++ *
++ * @param[in] _hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] _qh The QH to init.
++ * @param[in] _urb Holds the information about the device/endpoint that we need
++ * to initialize the QH. */
++#define SCHEDULE_SLOP 10
++void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb)
++{
++	memset (_qh, 0, sizeof (dwc_otg_qh_t));
++
++	/* Initialize QH */
++	switch (usb_pipetype(_urb->pipe)) {
++	case PIPE_CONTROL:
++		_qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
++		break;
++	case PIPE_BULK:
++		_qh->ep_type = USB_ENDPOINT_XFER_BULK;
++		break;
++	case PIPE_ISOCHRONOUS:
++		_qh->ep_type = USB_ENDPOINT_XFER_ISOC;
++		break;
++	case PIPE_INTERRUPT: 
++		_qh->ep_type = USB_ENDPOINT_XFER_INT;
++		break;
++	}
++
++	_qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0;
++
++	_qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	_qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
++	INIT_LIST_HEAD(&_qh->qtd_list);
++	INIT_LIST_HEAD(&_qh->qh_list_entry);
++	_qh->channel = NULL;
++
++	/* FS/LS Enpoint on HS Hub 
++	 * NOT virtual root hub */
++	_qh->do_split = 0;
++	_qh->speed = _urb->dev->speed;
++	if (((_urb->dev->speed == USB_SPEED_LOW) || 
++	     (_urb->dev->speed == USB_SPEED_FULL)) &&
++		(_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) {
++		DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n", 
++			   usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum, 
++			   _urb->dev->ttport);
++		_qh->do_split = 1;
++	}
++
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT ||
++	    _qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
++		/* Compute scheduling parameters once and save them. */
++		hprt0_data_t hprt;
++
++		/** @todo Account for split transfers in the bus time. */
++		int bytecount = dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp);
++		_qh->usecs = NS_TO_US(usb_calc_bus_time(_urb->dev->speed,
++					       usb_pipein(_urb->pipe),
++					(_qh->ep_type == USB_ENDPOINT_XFER_ISOC),bytecount));
++
++		/* Start in a slightly future (micro)frame. */
++		_qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number, SCHEDULE_SLOP);
++		_qh->interval = _urb->interval;
++#if 0
++		/* Increase interrupt polling rate for debugging. */
++		if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++			_qh->interval = 8;
++		}
++#endif		
++		hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0);
++		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && 
++		    ((_urb->dev->speed == USB_SPEED_LOW) || 
++		     (_urb->dev->speed == USB_SPEED_FULL)))
++		{
++			_qh->interval *= 8;
++			_qh->sched_frame |= 0x7;
++			_qh->start_split_frame = _qh->sched_frame;
++		}
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", _qh);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
++		    _urb->dev->devnum);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
++		    usb_pipeendpoint(_urb->pipe),
++		    usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", 
++		    ({ char *speed; switch (_urb->dev->speed) {
++		    case USB_SPEED_LOW: speed = "low";	break;
++		    case USB_SPEED_FULL: speed = "full";	break;
++		    case USB_SPEED_HIGH: speed = "high";	break;
++		    default: speed = "?";	break;
++		    }; speed;}));
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n",
++		    ({ char *type; switch (_qh->ep_type) {
++		    case USB_ENDPOINT_XFER_ISOC: type = "isochronous";	break;
++		    case USB_ENDPOINT_XFER_INT: type = "interrupt";	break;
++		    case USB_ENDPOINT_XFER_CONTROL: type = "control";	break;
++		    case USB_ENDPOINT_XFER_BULK: type = "bulk";	break;
++		    default: type = "?";	break;
++		    }; type;}));
++#ifdef DEBUG
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++			    _qh->usecs);
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++			    _qh->interval);
++	}
++#endif	
++	
++	return;
++}
++
++/**
++ * Microframe scheduler
++ * track the total use in hcd->frame_usecs
++ * keep each qh use in qh->frame_usecs
++ * when surrendering the qh then donate the time back
++ */
++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
++
++/*
++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
++{
++	int i;
++	for (i=0; i<8; i++) {
++		_hcd->frame_usecs[i] = max_uframe_usecs[i];
++	}
++	return 0;
++}
++
++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++	while (done == 0) {
++		/* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
++		if (utime <= _hcd->frame_usecs[i]) {
++			_hcd->frame_usecs[i] -= utime;
++			_qh->frame_usecs[i] += utime;
++			t_left -= utime;
++			ret = i;
++			done = 1;
++			return ret;
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++}
++
++/*
++ * use this for FS apps that can span multiple uframes
++ */
++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	int j;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++	unsigned short xtime;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++loop:
++	while (done == 0) {
++		if(_hcd->frame_usecs[i] <= 0) {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++			goto loop;
++		}
++
++		/*
++		 * we need n consequtive slots
++		 * so use j as a start slot j plus j+1 must be enough time (for now)
++		 */
++		xtime= _hcd->frame_usecs[i];
++		for (j = i+1 ; j < 8 ; j++ ) {
++			/*
++			 * if we add this frame remaining time to xtime we may
++			 * be OK, if not we need to test j for a complete frame
++			 */
++			if ((xtime+_hcd->frame_usecs[j]) < utime) {
++				if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
++					j = 8;
++					ret = -1;
++					continue;
++				}
++			}
++			if (xtime >= utime) {
++				ret = i;
++				j = 8;	/* stop loop with a good value ret */
++				continue;
++			}
++			/* add the frame time to x time */
++			xtime += _hcd->frame_usecs[j];
++			/* we must have a fully available next frame or break */
++			if ((xtime < utime)
++			    && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
++				ret = -1;
++				j = 8;	/* stop loop with a bad value ret */
++				continue;
++			}
++		}
++		if (ret >= 0) {
++			t_left = utime;
++			for (j = i; (t_left>0) && (j < 8); j++ ) {
++				t_left -= _hcd->frame_usecs[j];
++				if ( t_left <= 0 ) {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
++					_hcd->frame_usecs[j]= -t_left;
++					ret = i;
++					done = 1;
++				} else {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j];
++					_hcd->frame_usecs[j] = 0;
++				}
++			}
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++}
++
++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int ret;
++	ret = -1;
++
++	if (_qh->speed == USB_SPEED_HIGH) {
++		/* if this is a hs transaction we need a full frame */
++		ret = find_single_uframe(_hcd, _qh);
++	} else {
++		/* if this is a fs transaction we may need a sequence of frames */
++		ret = find_multi_uframe(_hcd, _qh);
++	}
++	return ret;
++}
++			
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	int		status;
++	uint32_t 	max_xfer_size;
++	uint32_t	max_channel_xfer_size;
++
++	status = 0;
++
++	max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mult(_qh->maxp);
++	max_channel_xfer_size = _hcd->core_if->core_params->max_transfer_size;
++
++	if (max_xfer_size > max_channel_xfer_size) {
++		DWC_NOTICE("%s: Periodic xfer length %d > "
++			    "max xfer length for channel %d\n",
++			    __func__, max_xfer_size, max_channel_xfer_size);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	int status = 0;
++
++	int frame;
++	status = find_uframe(_hcd, _qh);
++	frame = -1;
++	if (status == 0) {
++		frame = 7;
++	} else {
++		if (status > 0 )
++			frame = status-1;
++	}
++
++	/* Set the new frame up */
++	if (frame > -1) {
++		_qh->sched_frame &= ~0x7;
++		_qh->sched_frame |= (frame & 7);
++	}
++
++	if (status != -1 )
++		status = 0;
++	if (status) {
++		DWC_NOTICE("%s: Insufficient periodic bandwidth for "
++			   "periodic transfer.\n", __func__);
++		return status;
++	}
++
++	status = check_max_xfer_size(_hcd, _qh);
++	if (status) {
++		DWC_NOTICE("%s: Channel max transfer size too small "
++			    "for periodic transfer.\n", __func__);
++		return status;
++	}
++
++	/* Always start in the inactive schedule. */
++	list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive);
++
++
++	/* Update claimed usecs per (micro)frame. */
++	_hcd->periodic_usecs += _qh->usecs;
++
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated += _qh->usecs / _qh->interval;
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	}
++		
++	return status;
++}
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	unsigned long flags;
++	int status = 0;
++
++	local_irq_save(flags);
++
++	if (!list_empty(&_qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		goto done;
++	}
++
++	/* Add the new QH to the appropriate schedule */
++	if (dwc_qh_is_non_per(_qh)) {
++		/* Always start in the inactive schedule. */
++		list_add_tail(&_qh->qh_list_entry, &_hcd->non_periodic_sched_inactive);
++	} else {
++		status = schedule_periodic(_hcd, _qh);
++	}
++
++ done:
++	local_irq_restore(flags);
++
++	return status;
++}
++
++/**
++ * This function adds a QH to the non periodic deferred schedule.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++	if (!list_empty(&_qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		goto done;
++	}
++
++	/* Add the new QH to the non periodic deferred schedule */
++	if (dwc_qh_is_non_per(_qh)) {
++		list_add_tail(&_qh->qh_list_entry,
++			      &_hcd->non_periodic_sched_deferred);
++	}
++done:
++	local_irq_restore(flags);
++	return 0;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	int i;
++	list_del_init(&_qh->qh_list_entry);
++
++
++	/* Update claimed usecs per (micro)frame. */
++	_hcd->periodic_usecs -= _qh->usecs;
++
++	for (i = 0; i < 8; i++) {
++		_hcd->frame_usecs[i] += _qh->frame_usecs[i];
++		_qh->frame_usecs[i] = 0;
++	}
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= _qh->usecs / _qh->interval;
++
++	if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
++			    _qh, _qh->usecs, _qh->interval);
++	}
++}
++
++/** 
++ * Removes a QH from either the non-periodic or periodic schedule.  Memory is
++ * not freed.
++ *
++ * @param[in] _hcd The HCD state structure.
++ * @param[in] _qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++	unsigned long flags;
++
++	local_irq_save(flags);
++
++	if (list_empty(&_qh->qh_list_entry)) {
++		/* QH is not in a schedule. */
++		goto done;
++	}
++
++	if (dwc_qh_is_non_per(_qh)) {
++		if (_hcd->non_periodic_qh_ptr == &_qh->qh_list_entry) {
++			_hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++		}
++		list_del_init(&_qh->qh_list_entry);
++	} else {
++		deschedule_periodic(_hcd, _qh);
++	}
++
++ done:
++	local_irq_restore(flags);
++}
++
++/**
++ * Defers a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the deferred non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ */
++int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, int delay)
++{
++        int deact = 1;
++	unsigned long flags;
++	local_irq_save(flags);
++	if (dwc_qh_is_non_per(_qh)) {
++	        _qh->sched_frame =
++		  dwc_frame_num_inc(_hcd->frame_number,
++				    delay);
++		_qh->channel = NULL;
++		_qh->qtd_in_process = NULL;
++		deact = 0;
++		dwc_otg_hcd_qh_remove(_hcd, _qh);
++		if (!list_empty(&_qh->qtd_list)) {
++			/* Add back to deferred non-periodic schedule. */
++			dwc_otg_hcd_qh_add_deferred(_hcd, _qh);
++		}
++	}
++	local_irq_restore(flags);
++	return deact;
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_next_periodic_split)
++{
++	unsigned long flags;
++	local_irq_save(flags);
++
++	if (dwc_qh_is_non_per(_qh)) {
++		dwc_otg_hcd_qh_remove(_hcd, _qh);
++		if (!list_empty(&_qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule. */
++			dwc_otg_hcd_qh_add(_hcd, _qh);
++		}
++	} else {
++		uint16_t frame_number =	dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++
++		if (_qh->do_split) {
++			/* Schedule the next continuing periodic split transfer */
++			if (sched_next_periodic_split) {
++
++				_qh->sched_frame = frame_number;
++				if (dwc_frame_num_le(frame_number,
++						     dwc_frame_num_inc(_qh->start_split_frame, 1))) {
++					/*
++					 * Allow one frame to elapse after start
++					 * split microframe before scheduling
++					 * complete split, but DONT if we are
++					 * doing the next start split in the
++					 * same frame for an ISOC out.
++					 */
++					if ((_qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (_qh->ep_is_in != 0)) {
++						_qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, 1);
++					}
++				}
++			} else {
++				_qh->sched_frame = dwc_frame_num_inc(_qh->start_split_frame,
++								     _qh->interval);
++				if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++					_qh->sched_frame = frame_number;
++				}
++				_qh->sched_frame |= 0x7;
++				_qh->start_split_frame = _qh->sched_frame;
++			}
++		} else {
++			_qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, _qh->interval);
++			if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++				_qh->sched_frame = frame_number;
++			}
++		}
++
++		if (list_empty(&_qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(_hcd, _qh);
++		} else {
++			/*
++			 * Remove from periodic_sched_queued and move to
++			 * appropriate queue.
++			 */
++			if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++				list_move(&_qh->qh_list_entry,
++					  &_hcd->periodic_sched_ready);
++			} else {
++				list_move(&_qh->qh_list_entry,
++					  &_hcd->periodic_sched_inactive);
++			}
++		}
++	}
++
++	local_irq_restore(flags);
++}
++
++/** 
++ * This function allocates and initializes a QTD. 
++ *
++ * @param[in] _urb The URB to create a QTD from.  Each URB-QTD pair will end up
++ * pointing to each other so each pair should have a unique correlation.
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *_urb)
++{
++	dwc_otg_qtd_t *qtd;
++
++	qtd = dwc_otg_hcd_qtd_alloc ();
++	if (qtd == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qtd_init (qtd, _urb);
++	return qtd;
++}
++
++/** 
++ * Initializes a QTD structure.
++ *
++ * @param[in] _qtd The QTD to initialize.
++ * @param[in] _urb The URB to use for initialization.  */
++void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *_qtd, struct urb *_urb)
++{
++	memset (_qtd, 0, sizeof (dwc_otg_qtd_t));
++	_qtd->urb = _urb;
++	if (usb_pipecontrol(_urb->pipe)) {
++		/*
++		 * The only time the QTD data toggle is used is on the data
++		 * phase of control transfers. This phase always starts with
++		 * DATA1.
++		 */
++		_qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		_qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++	}
++
++	/* start split */
++	_qtd->complete_split = 0;
++	_qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++	_qtd->isoc_split_offset = 0;
++
++	/* Store the qtd ptr in the urb to reference what QTD. */
++	_urb->hcpriv = _qtd;
++	return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH.  It will find the correct
++ * QH to place the QTD into.  If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] _qtd The QTD to add
++ * @param[in] _dwc_otg_hcd The DWC HCD structure
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd,  dwc_otg_hcd_t * _dwc_otg_hcd)
++{
++	struct usb_host_endpoint *ep;
++	dwc_otg_qh_t *qh;
++	unsigned long flags;
++	int retval = 0;
++	struct urb *urb = _qtd->urb;
++
++	local_irq_save(flags);
++
++	/*
++	 * Get the QH which holds the QTD-list to insert to. Create QH if it
++	 * doesn't exist.
++	 */
++	ep = dwc_urb_to_endpoint(urb);
++	qh = (dwc_otg_qh_t *)ep->hcpriv;
++	if (qh == NULL) {
++		qh = dwc_otg_hcd_qh_create (_dwc_otg_hcd, urb);
++		if (qh == NULL) {
++			retval = -1;
++			goto done;
++		}
++		ep->hcpriv = qh;
++	}
++
++	_qtd->qtd_qh_ptr = qh;
++	retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh);
++	if (retval == 0) {
++		list_add_tail(&_qtd->qtd_list_entry, &qh->qtd_list);
++	}
++
++ done:
++	local_irq_restore(flags);
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+@@ -0,0 +1,176 @@
++/******************************************************************************
++**
++** FILE NAME    : dwc_otg_ifx.c
++** PROJECT      : Twinpass/Danube
++** MODULES      : DWC OTG USB
++**
++** DATE         : 12 Auguest 2007
++** AUTHOR       : Sung Winder
++** DESCRIPTION  : Platform specific initialization.
++** COPYRIGHT    :       Copyright (c) 2007
++**                      Infineon Technologies AG
++**                      2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++**                      Hsin-chu City, 300 Taiwan.
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date             $Author         $Comment
++** 12 Auguest 2007   Sung Winder     Initiate Version
++*******************************************************************************/
++#include "dwc_otg_ifx.h"
++
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#include <linux/gpio.h>
++
++#include <asm/io.h>
++//#include <asm/mach-ifxmips/ifxmips.h>
++#include <xway.h>
++
++#define IFXMIPS_GPIO_BASE_ADDR  (0xBE100B00)
++
++#define IFXMIPS_GPIO_P0_OUT     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
++#define IFXMIPS_GPIO_P1_OUT     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
++#define IFXMIPS_GPIO_P0_IN      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
++#define IFXMIPS_GPIO_P1_IN      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
++#define IFXMIPS_GPIO_P0_DIR     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
++#define IFXMIPS_GPIO_P1_DIR     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
++#define IFXMIPS_GPIO_P0_ALTSEL0     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
++#define IFXMIPS_GPIO_P1_ALTSEL0     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
++#define IFXMIPS_GPIO_P0_ALTSEL1     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
++#define IFXMIPS_GPIO_P1_ALTSEL1     ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
++#define IFXMIPS_GPIO_P0_OD      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
++#define IFXMIPS_GPIO_P1_OD      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
++#define IFXMIPS_GPIO_P0_STOFF       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
++#define IFXMIPS_GPIO_P1_STOFF       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
++#define IFXMIPS_GPIO_P0_PUDSEL      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
++#define IFXMIPS_GPIO_P1_PUDSEL      ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
++#define IFXMIPS_GPIO_P0_PUDEN       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
++#define IFXMIPS_GPIO_P1_PUDEN       ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
++
++
++extern void lq_enable_irq(unsigned int irq_nr);
++#define writel lq_w32
++#define readl lq_r32
++void dwc_otg_power_on (void)
++{
++	// GPIOs
++	gpio_request(28, "USB_POWER");
++	gpio_direction_output(28, 1);
++	/*
++	writel(readl(IFXMIPS_GPIO_P0_DIR) | (0x4000), IFXMIPS_GPIO_P0_DIR);
++	writel(readl(IFXMIPS_GPIO_P0_OD) | (0x4000), IFXMIPS_GPIO_P0_OD);
++	writel(readl(IFXMIPS_GPIO_P0_ALTSEL0) & ~(0x4000), IFXMIPS_GPIO_P0_ALTSEL0);
++	writel(readl(IFXMIPS_GPIO_P0_ALTSEL1) & ~(0x4000), IFXMIPS_GPIO_P0_ALTSEL1);
++	writel(readl(IFXMIPS_GPIO_P0_OUT) | (0x4000), IFXMIPS_GPIO_P0_OUT);
++*/
++/*	writel(readl(IFXMIPS_GPIO_P1_DIR) | (0x1000), IFXMIPS_GPIO_P1_DIR);
++	writel(readl(IFXMIPS_GPIO_P1_OD) | (0x1000), IFXMIPS_GPIO_P1_OD);
++	writel(readl(IFXMIPS_GPIO_P1_ALTSEL0) & ~(0x1000), IFXMIPS_GPIO_P1_ALTSEL0);
++	writel(readl(IFXMIPS_GPIO_P1_ALTSEL1) & ~(0x1000), IFXMIPS_GPIO_P1_ALTSEL1);
++	writel(readl(IFXMIPS_GPIO_P1_OUT) | (0x1000), IFXMIPS_GPIO_P1_OUT);
++*/
++	// clear power
++	//set_bit (0, DANUBE_PMU_PWDCR);
++	//set_bit (6, DANUBE_PMU_PWDCR);
++	writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR);
++
++	// set clock gating
++	//set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++	//set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++	writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
++
++	// set power
++	//clear_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);
++	writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR);
++	//clear_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);
++	writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR);
++	//clear_bit (15, (volatile unsigned long *)DANUBE_PMU_PWDCR);
++	writel(readl(DANUBE_PMU_PWDCR) & ~0x8000, DANUBE_PMU_PWDCR);
++	//writel(readl(DANUBE_PMU_PWDCR) & ~0x8041, DANUBE_PMU_PWDCR);
++
++#if 1//defined (DWC_HOST_ONLY)
++	// make the hardware be a host controller (default)
++	//clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++	writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_HDSEL_BIT), DANUBE_RCU_UBSCFG);
++
++	//#elif defined (DWC_DEVICE_ONLY)
++	/* set the controller to the device mode */
++	//    set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++#else
++#error  "For Danube/Twinpass, it should be HOST or Device Only."
++#endif
++
++	// set the HC's byte-order to big-endian
++	//set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++	writel(readl(DANUBE_RCU_UBSCFG) | (1<<DANUBE_USBCFG_HOST_END_BIT), DANUBE_RCU_UBSCFG);
++	//clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++	writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_SLV_END_BIT), DANUBE_RCU_UBSCFG);
++	//writel(0x400, DANUBE_RCU_UBSCFG);
++
++	// PHY configurations.
++	writel (0x14014, (volatile unsigned long *)0xbe10103c);
++}
++
++static void release_platform_dev(struct device * dev)
++{
++	printk("IFX dwc_otg USB platform_dev release\n");
++	dev->parent = NULL;
++}
++
++static struct resource resources[] =
++{
++	[0] = {
++		.name    = "dwc_otg_membase",
++		.start   = IFX_USB_IOMEM_BASE,
++		.end	   = IFX_USB_IOMEM_BASE + IFX_USB_IOMEM_SIZE - 1,
++		.flags	 = IORESOURCE_MEM,
++	},
++	[1] = {
++		.name    = "dwc_otg_irq",
++		.start   = IFX_USB_IRQ,
++		.flags   = IORESOURCE_IRQ,
++	},
++};
++
++static u64 dwc_dmamask = (u32)0x1fffffff;
++
++static struct platform_device platform_dev = {
++	.dev = {
++		.release       = release_platform_dev,
++		.dma_mask      = &dwc_dmamask,
++	},
++	.resource		= resources,
++	.num_resources		= ARRAY_SIZE(resources),
++};
++
++extern const char dwc_driver_name[];
++int ifx_usb_hc_init(unsigned long base_addr, int irq)
++{
++	if (platform_dev.dev.parent)
++		return -EBUSY;
++
++	/* finish seting up the platform device */
++	//resources[0].start = base_addr;
++	//resources[0].end = base_addr + SZ_256K;
++
++	//resources[1].start = irq;
++
++	/* The driver core will probe for us.  We know sl811-hcd has been
++	 * initialized already because of the link order dependency.
++	 */
++	platform_dev.name = dwc_driver_name;
++	lq_enable_irq(resources[1].start);
++
++	return platform_device_register(&platform_dev);
++}
++
++void ifx_usb_hc_remove(void)
++{
++    platform_device_unregister(&platform_dev);
++}
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.h
+@@ -0,0 +1,79 @@
++/******************************************************************************
++**
++** FILE NAME    : dwc_otg_ifx.h
++** PROJECT      : Twinpass/Danube
++** MODULES      : DWC OTG USB
++**
++** DATE         : 12 April 2007
++** AUTHOR       : Sung Winder
++** DESCRIPTION  : Platform specific initialization.
++** COPYRIGHT    :       Copyright (c) 2007
++**                      Infineon Technologies AG
++**                      2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++**                      Hsin-chu City, 300 Taiwan.
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date          $Author         $Comment
++** 12 April 2007   Sung Winder     Initiate Version
++*******************************************************************************/
++#if !defined(__DWC_OTG_IFX_H__)
++#define __DWC_OTG_IFX_H__
++
++#include <irq.h>
++
++// 20070316, winder added.
++#ifndef SZ_256K
++#define SZ_256K                         0x00040000
++#endif
++
++extern void dwc_otg_power_on (void);
++
++/* FIXME: The current Linux-2.6 do not have these header files, but anyway, we need these. */
++// #include <asm/danube/danube.h>
++// #include <asm/ifx/irq.h>
++
++/* winder, I used the Danube parameter as default. *
++ * We could change this through module param.      */
++#define IFX_USB_IOMEM_BASE 0x1e101000
++#define IFX_USB_IOMEM_SIZE SZ_256K
++#define IFX_USB_IRQ LQ_USB_INT
++
++/**
++ * This function is called to set correct clock gating and power.
++ * For Twinpass/Danube board.
++ */
++#ifndef DANUBE_RCU_BASE_ADDR
++#define DANUBE_RCU_BASE_ADDR            (0xBF203000)
++#endif
++
++#ifndef DANUBE_CGU
++#define DANUBE_CGU                          (0xBF103000)
++#endif
++#ifndef DANUBE_CGU_IFCCR
++/***CGU Interface Clock Control Register***/
++#define DANUBE_CGU_IFCCR                        ((volatile u32*)(DANUBE_CGU+ 0x0018))
++#endif
++
++#ifndef DANUBE_PMU
++#define DANUBE_PMU                              (KSEG1+0x1F102000)
++#endif
++#ifndef DANUBE_PMU_PWDCR
++/* PMU Power down Control Register */
++#define DANUBE_PMU_PWDCR                        ((volatile u32*)(DANUBE_PMU+0x001C))
++#endif
++
++
++#define DANUBE_RCU_UBSCFG  ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x18))
++#define DANUBE_USBCFG_HDSEL_BIT    11	// 0:host, 1:device
++#define DANUBE_USBCFG_HOST_END_BIT 10	// 0:little_end, 1:big_end
++#define DANUBE_USBCFG_SLV_END_BIT  9	// 0:little_end, 1:big_end
++
++extern void lq_mask_and_ack_irq (unsigned int irq_nr);
++#define mask_and_ack_ifx_irq lq_mask_and_ack_irq
++
++#endif //__DWC_OTG_IFX_H__
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_plat.h
+@@ -0,0 +1,269 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/platform/dwc_otg_plat.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510301 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_PLAT_H__)
++#define __DWC_OTG_PLAT_H__
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++/**
++ * @file 
++ *
++ * This file contains the Platform Specific constants, interfaces
++ * (functions and macros) for Linux.
++ *
++ */
++/*#if !defined(__LINUX__)
++#error "The contents of this file is Linux specific!!!"
++#endif
++*/
++#include <xway.h>
++#define writel lq_w32
++#define readl lq_r32
++
++/**
++ * Reads the content of a register.
++ *
++ * @param _reg address of register to read.
++ * @return contents of the register.
++ *
++
++ * Usage:<br>
++ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code> 
++ */
++static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *_reg) 
++{
++        return readl(_reg);
++};
++
++/** 
++ * Writes a register with a 32 bit value.
++ *
++ * @param _reg address of register to read.
++ * @param _value to write to _reg.
++ *
++ * Usage:<br>
++ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
++ */
++static __inline__ void dwc_write_reg32( volatile uint32_t *_reg, const uint32_t _value) 
++{
++        writel( _value, _reg );
++};
++
++/**  
++ * This function modifies bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ *
++ * @param _reg address of register to read.
++ * @param _clear_mask bit mask to be cleared.
++ * @param _set_mask bit mask to be set.
++ *
++ * Usage:<br> 
++ * <code> // Clear the SOF Interrupt Mask bit and <br>
++ * // set the OTG Interrupt mask bit, leaving all others as they were.
++ *    dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
++ */
++static __inline__
++ void dwc_modify_reg32( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask) 
++{
++        writel( (readl(_reg) & ~_clear_mask) | _set_mask, _reg );  
++};
++
++
++/**
++ * Wrapper for the OS micro-second delay function.
++ * @param[in] _usecs Microseconds of delay
++ */
++static __inline__ void UDELAY( const uint32_t _usecs ) 
++{
++        udelay( _usecs );
++}
++
++/**
++ * Wrapper for the OS milli-second delay function.
++ * @param[in] _msecs milliseconds of delay
++ */
++static __inline__ void MDELAY( const uint32_t _msecs ) 
++{
++        mdelay( _msecs );
++}
++
++/**
++ * Wrapper for the Linux spin_lock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param _lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_LOCK( spinlock_t *_lock )  
++{
++        spin_lock(_lock);
++}
++
++/**
++ * Wrapper for the Linux spin_unlock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param _lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )     
++{ 
++        spin_unlock(_lock);
++}
++
++/**
++ * Wrapper (macro) for the Linux spin_lock_irqsave.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param _l Pointer to the spinlock.
++ * @param _f unsigned long for irq flags storage.
++ */
++#define SPIN_LOCK_IRQSAVE( _l, _f )  { \
++	spin_lock_irqsave(_l,_f); \
++	}
++
++/**
++ * Wrapper (macro) for the Linux spin_unlock_irqrestore.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param _l Pointer to the spinlock.
++ * @param _f unsigned long for irq flags storage.
++ */
++#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) {\
++	spin_unlock_irqrestore(_l,_f); 	\
++	}
++
++
++/*
++ * Debugging support vanishes in non-debug builds.  
++ */
++
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
++{
++        uint32_t old = g_dbg_lvl;
++        g_dbg_lvl = _new;
++        return old;
++}
++
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV	(0x20)
++/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ *  messages */
++#define DBG_PCD		(0x4)	
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV	(0x40)	
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)	
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV	(0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ *  mode. */
++#define DBG_HCD_URB	(0x800)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++
++/** All debug messages off */
++#define DBG_OFF		0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "DWC_otg: "
++
++/** 
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ *    Example:<p>
++ * <code>
++ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br> 
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++
++/**
++ * Print an Error message.
++ */
++#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
++/**
++ * Print a Warning message.
++ */
++#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
++/**
++ * Print a notice (normal but significant message).
++ */
++#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
++/**
++ *  Basic message printing.
++ */
++#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
++
++#endif
++
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
+@@ -0,0 +1,1797 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_regs.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/****************************************************************************/
++/** DWC_otg Core registers .  
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs 
++{
++        /** OTG Control and Status Register.  <i>Offset: 000h</i> */
++        volatile uint32_t gotgctl; 
++        /** OTG Interrupt Register.  <i>Offset: 004h</i> */
++        volatile uint32_t gotgint; 
++        /**Core AHB Configuration Register.  <i>Offset: 008h</i> */
++        volatile uint32_t gahbcfg; 
++#define DWC_GLBINTRMASK 	0x0001
++#define DWC_DMAENABLE   	0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY 	0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY 	0x0000
++#define DWC_PTXEMPTYLVL_EMPTY 	0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY 	0x0000
++
++
++        /**Core USB Configuration Register.  <i>Offset: 00Ch</i> */
++        volatile uint32_t gusbcfg; 
++        /**Core Reset Register.  <i>Offset: 010h</i> */
++        volatile uint32_t grstctl; 
++        /**Core Interrupt Register.  <i>Offset: 014h</i> */
++        volatile uint32_t gintsts; 
++        /**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
++        volatile uint32_t gintmsk; 
++        /**Receive Status Queue Read Register (Read Only).  <i>Offset: 01Ch</i> */
++        volatile uint32_t grxstsr; 
++        /**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
++        volatile uint32_t grxstsp; 
++        /**Receive FIFO Size Register.  <i>Offset: 024h</i> */
++        volatile uint32_t grxfsiz; 
++        /**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
++        volatile uint32_t gnptxfsiz; 
++        /**Non Periodic Transmit FIFO/Queue Status Register (Read
++         * Only). <i>Offset: 02Ch</i> */
++        volatile uint32_t gnptxsts; 
++        /**I2C Access Register.  <i>Offset: 030h</i> */
++        volatile uint32_t gi2cctl; 
++        /**PHY Vendor Control Register.  <i>Offset: 034h</i> */
++        volatile uint32_t gpvndctl;
++        /**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
++        volatile uint32_t ggpio; 
++        /**User ID Register.  <i>Offset: 03Ch</i> */
++        volatile uint32_t guid; 
++        /**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
++        volatile uint32_t gsnpsid;
++        /**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
++        volatile uint32_t ghwcfg1; 
++        /**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
++        volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE 	0
++#define DWC_MODE_SRP_ONLY_CAPABLE 	1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE 	2
++#define DWC_MODE_SRP_CAPABLE_DEVICE 	3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE  4
++#define DWC_MODE_SRP_CAPABLE_HOST 	5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST  	6
++
++        /**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
++        volatile uint32_t ghwcfg3;
++        /**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
++        volatile uint32_t ghwcfg4;
++        /** Reserved  <i>Offset: 054h-0FFh</i> */
++        uint32_t reserved[43];
++        /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++        volatile uint32_t hptxfsiz;
++	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++		otherwise Device Transmit FIFO#n Register.
++         * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++        //volatile uint32_t dptxfsiz[15];
++	volatile uint32_t dptxfsiz_dieptxf[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL).  Set the bits using the bit 
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++		unsigned reserved31_21 : 11;
++		unsigned currmod : 1;
++		unsigned bsesvld : 1;
++		unsigned asesvld : 1;
++		unsigned reserved17 : 1;
++		unsigned conidsts : 1;
++		unsigned reserved15_12 : 4;
++		unsigned devhnpen : 1;
++		unsigned hstsethnpen : 1;
++		unsigned hnpreq : 1;
++		unsigned hstnegscs : 1;
++		unsigned reserved7_2 : 6;
++        unsigned sesreq : 1;
++        unsigned sesreqscs : 1;
++        } b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++		/** Current Mode */
++		unsigned reserved31_20 : 12;
++		/** Debounce Done */
++		unsigned debdone : 1;
++		/** A-Device Timeout Change */
++		unsigned adevtoutchng : 1;
++		/** Host Negotiation Detected */
++		unsigned hstnegdet : 1;
++		unsigned reserver16_10 : 7;
++		/** Host Negotiation Success Status Change */
++		unsigned hstnegsucstschng : 1;
++		/** Session Request Success Status Change */
++		unsigned sesreqsucstschng : 1;
++		unsigned reserved3_7 : 5;
++		/** Session End Detected */
++		unsigned sesenddet : 1;
++		/** Current Mode */
++		unsigned reserved1_0 : 2;
++        } b;
++} gotgint_data_t;
++
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG).  Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 		1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
++                unsigned reserved9_31 : 23;
++                unsigned ptxfemplvl : 1;
++                unsigned nptxfemplvl_txfemplvl : 1;
++#define DWC_GAHBCFG_DMAENABLE   		1
++                unsigned reserved : 1;
++                unsigned dmaenable : 1;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 	0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 		1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 	3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 	5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 	7
++                unsigned hburstlen : 4;
++                unsigned glblintrmsk : 1;
++#define DWC_GAHBCFG_GLBINT_ENABLE 		1
++
++        } b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG).  Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++	unsigned corrupt_tx_packet: 1;		/*fscz*/
++		unsigned force_device_mode: 1;
++		unsigned force_host_mode: 1;
++		unsigned reserved23_28 : 6;
++		unsigned term_sel_dl_pulse : 1;
++                unsigned ulpi_int_vbus_indicator : 1;
++                unsigned ulpi_ext_vbus_drv : 1;
++		unsigned ulpi_clk_sus_m : 1;
++		unsigned ulpi_auto_res : 1;
++		unsigned ulpi_fsls : 1;
++                unsigned otgutmifssel : 1;
++                unsigned phylpwrclksel : 1;
++                unsigned nptxfrwnden : 1;
++                unsigned usbtrdtim : 4;
++                unsigned hnpcap : 1;
++                unsigned srpcap : 1;
++                unsigned ddrsel : 1;
++                unsigned physel : 1;
++                unsigned fsintf : 1;
++                unsigned ulpi_utmi_sel : 1;
++                unsigned phyif : 1;
++                unsigned toutcal : 3;
++        } b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++                /** AHB Master Idle.  Indicates the AHB Master State
++                 * Machine is in IDLE condition. */
++                unsigned ahbidle : 1;                
++                /** DMA Request Signal.  Indicated DMA request is in
++                 * probress.  Used for debug purpose. */
++                unsigned dmareq : 1;
++                /** Reserved */
++			unsigned reserved29_11 : 19;
++                /** TxFIFO Number (TxFNum) (Device and Host).
++                 * 
++                 * This is the FIFO number which needs to be flushed,
++                 * using the TxFIFO Flush bit. This field should not
++                 * be changed until the TxFIFO Flush bit is cleared by
++                 * the core.
++                 *   - 0x0 : Non Periodic TxFIFO Flush
++                 *   - 0x1 : Periodic TxFIFO #1 Flush in device mode
++                 *     or Periodic TxFIFO in host mode
++                 *   - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++                 *   - ...
++                 *   - 0xF : Periodic TxFIFO #15 Flush in device mode
++                 *   - 0x10: Flush all the Transmit NonPeriodic and
++                 *     Transmit Periodic FIFOs in the core
++                 */
++                unsigned txfnum : 5;
++                /** TxFIFO Flush (TxFFlsh) (Device and Host).  
++                 *
++                 * This bit is used to selectively flush a single or
++                 * all transmit FIFOs.  The application must first
++                 * ensure that the core is not in the middle of a
++                 * transaction.  <p>The application should write into
++                 * this bit, only after making sure that neither the
++                 * DMA engine is writing into the TxFIFO nor the MAC
++                 * is reading the data out of the FIFO.  <p>The
++                 * application should wait until the core clears this
++                 * bit, before performing any operations. This bit
++                 * will takes 8 clocks (slowest of PHY or AHB clock)
++                 * to clear.
++                 */
++                unsigned txfflsh : 1;
++                /** RxFIFO Flush (RxFFlsh) (Device and Host)
++                 *
++                 * The application can flush the entire Receive FIFO
++                 * using this bit.  <p>The application must first
++                 * ensure that the core is not in the middle of a
++                 * transaction.  <p>The application should write into
++                 * this bit, only after making sure that neither the
++                 * DMA engine is reading from the RxFIFO nor the MAC
++                 * is writing the data in to the FIFO.  <p>The
++                 * application should wait until the bit is cleared
++                 * before performing any other operations. This bit
++                 * will takes 8 clocks (slowest of PHY or AHB clock)
++                 * to clear.
++                 */
++                unsigned rxfflsh : 1;
++                /** In Token Sequence Learning Queue Flush
++                 * (INTknQFlsh) (Device Only)
++                 */
++                unsigned intknqflsh : 1;
++                /** Host Frame Counter Reset (Host Only)<br>
++                 * 
++                 * The application can reset the (micro)frame number
++                 * counter inside the core, using this bit. When the
++                 * (micro)frame counter is reset, the subsequent SOF
++                 * sent out by the core, will have a (micro)frame
++                 * number of 0.
++                 */
++                unsigned hstfrm : 1;
++                /** Hclk Soft Reset
++		 *
++		 * The application uses this bit to reset the control logic in
++		 * the AHB clock domain. Only AHB clock domain pipelines are
++		 * reset.
++		 */
++                unsigned hsftrst : 1;
++                /** Core Soft Reset (CSftRst) (Device and Host)
++                 *
++                 * The application can flush the control logic in the
++                 * entire core using this bit. This bit resets the
++                 * pipelines in the AHB Clock domain as well as the
++                 * PHY Clock domain.
++                 *
++                 * The state machines are reset to an IDLE state, the
++                 * control bits in the CSRs are cleared, all the
++                 * transmit FIFOs and the receive FIFO are flushed.
++                 *
++                 * The status mask bits that control the generation of
++                 * the interrupt, are cleared, to clear the
++                 * interrupt. The interrupt status bits are not
++                 * cleared, so the application can get the status of
++                 * any events that occurred in the core after it has
++                 * set this bit.
++                 *
++                 * Any transactions on the AHB are terminated as soon
++                 * as possible following the protocol. Any
++                 * transactions on the USB are terminated immediately.
++                 *
++                 * The configuration settings in the CSRs are
++                 * unchanged, so the software doesn't have to
++                 * reprogram these registers (Device
++                 * Configuration/Host Configuration/Core System
++                 * Configuration/Core PHY Configuration).
++                 *
++                 * The application can write to this bit, any time it
++                 * wants to reset the core. This is a self clearing
++                 * bit and the core clears this bit after all the
++                 * necessary logic is reset in the core, which may
++                 * take several clocks, depending on the current state
++                 * of the core.
++                 */
++                unsigned csftrst : 1;
++        } b;
++} grstctl_t;
++
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK).  Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct 
++        {
++                unsigned wkupintr : 1;
++                unsigned sessreqintr : 1;
++                unsigned disconnect : 1;
++                unsigned conidstschng : 1;
++                unsigned reserved27 : 1;
++                unsigned ptxfempty : 1;
++                unsigned hcintr : 1;
++                unsigned portintr : 1;
++                unsigned reserved22_23 : 2;
++                unsigned incomplisoout : 1;
++                unsigned incomplisoin : 1;
++                unsigned outepintr : 1;
++                unsigned inepintr : 1;
++                unsigned epmismatch : 1;
++                unsigned reserved16 : 1;
++                unsigned eopframe : 1;
++                unsigned isooutdrop : 1;
++                unsigned enumdone : 1;
++                unsigned usbreset : 1;
++                unsigned usbsuspend : 1;
++                unsigned erlysuspend : 1;
++                unsigned i2cintr : 1;
++                unsigned reserved8 : 1;
++                unsigned goutnakeff : 1;
++                unsigned ginnakeff : 1;
++                unsigned nptxfempty : 1;
++                unsigned rxstsqlvl : 1;
++                unsigned sofintr : 1;
++                unsigned otgintr : 1;
++                unsigned modemismatch : 1;
++                unsigned reserved0 : 1;
++        } b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data
++{
++        /** raw register data */
++        uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++        /** register bits */
++        struct 
++        {
++#define DWC_HOST_MODE 1
++                unsigned wkupintr : 1;
++                unsigned sessreqintr : 1;
++                unsigned disconnect : 1;
++                unsigned conidstschng : 1;
++                unsigned reserved27 : 1;
++                unsigned ptxfempty : 1;
++                unsigned hcintr : 1;
++                unsigned portintr : 1;
++                unsigned reserved22_23 : 2;
++                unsigned incomplisoout : 1;
++                unsigned incomplisoin : 1;
++                unsigned outepintr : 1;
++                unsigned inepint: 1;
++                unsigned epmismatch : 1;
++                unsigned intokenrx : 1;
++                unsigned eopframe : 1;
++                unsigned isooutdrop : 1;
++                unsigned enumdone : 1;
++                unsigned usbreset : 1;
++                unsigned usbsuspend : 1;
++                unsigned erlysuspend : 1;
++                unsigned i2cintr : 1;
++                unsigned reserved8 : 1;
++                unsigned goutnakeff : 1;
++                unsigned ginnakeff : 1;
++                unsigned nptxfempty : 1;
++                unsigned rxstsqlvl : 1;
++                unsigned sofintr : 1;
++                unsigned otgintr : 1;
++                unsigned modemismatch : 1;
++                unsigned curmode : 1;
++        } b;
++} gintsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and 
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> 
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++	  unsigned reserved : 7;
++	  unsigned fn : 4;
++#define DWC_STS_DATA_UPDT   	0x2               // OUT Data Packet
++#define DWC_STS_XFER_COMP   	0x3               // OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK   	0x1               // Global OUT NAK
++#define DWC_DSTS_SETUP_COMP 	0x4               // Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT	0x6               // SETUP Packet
++	  unsigned pktsts : 4;
++	  unsigned dpid : 2;
++	  unsigned bcnt : 11;
++	  unsigned epnum : 4;
++        } b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and 
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> 
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++	  unsigned reserved31_21 : 11;
++#define DWC_GRXSTS_PKTSTS_IN              0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP    0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED       0x7
++	  unsigned pktsts : 4;
++	  unsigned dpid : 2;
++	  unsigned bcnt : 11;
++	  unsigned chnum : 4;
++        } b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn). Read the register into the <i>d32</i> element then
++ * read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++		unsigned depth : 16;
++		unsigned startaddr : 16;
++        } b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++                unsigned reserved : 1;
++                /** Top of the Non-Periodic Transmit Request Queue 
++                 *  - bits 30:27 - Channel/EP Number
++                 *  - bits 26:25 - Token Type 
++                 *  - bit 24 - Terminate (Last entry for the selected
++                 *    channel/EP)
++                 *    - 2'b00 - IN/OUT
++                 *    - 2'b01 - Zero Length OUT
++                 *    - 2'b10 - PING/Complete Split
++                 *    - 2'b11 - Channel Halt
++
++                 */
++                unsigned nptxqtop_chnep : 4;
++                unsigned nptxqtop_token : 2;
++                unsigned nptxqtop_terminate : 1;
++		unsigned nptxqspcavail : 8;
++		unsigned nptxfspcavail : 16;
++        } b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data 	/* fscz */	 //*
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved : 16;
++		unsigned txfspcavail : 16;
++	} b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++	struct {
++		unsigned bsydne : 1;
++		unsigned rw : 1;
++		unsigned reserved : 2;
++		unsigned i2cdevaddr : 2;
++		unsigned i2csuspctl : 1;
++		unsigned ack : 1;
++		unsigned i2cen : 1;
++		unsigned addr : 7;
++		unsigned regaddr : 8;
++		unsigned rwdata : 8;
++        } b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data {
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                unsigned ep_dir15 : 2;
++                unsigned ep_dir14 : 2;
++                unsigned ep_dir13 : 2;
++                unsigned ep_dir12 : 2;
++                unsigned ep_dir11 : 2;
++                unsigned ep_dir10 : 2;
++                unsigned ep_dir9 : 2;
++                unsigned ep_dir8 : 2;
++                unsigned ep_dir7 : 2;
++                unsigned ep_dir6 : 2;
++                unsigned ep_dir5 : 2;
++                unsigned ep_dir4 : 2;
++                unsigned ep_dir3 : 2;
++                unsigned ep_dir2 : 2;
++                unsigned ep_dir1 : 2;
++                unsigned ep_dir0 : 2;
++        } b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                /* GHWCFG2 */
++                unsigned reserved31 : 1;
++                unsigned dev_token_q_depth : 5;
++                unsigned host_perio_tx_q_depth : 2;
++                unsigned nonperio_tx_q_depth : 2;
++                unsigned rx_status_q_depth : 2;
++                unsigned dynamic_fifo : 1;
++                unsigned perio_ep_supported : 1;
++                unsigned num_host_chan : 4;
++                unsigned num_dev_ep : 4;
++                unsigned fs_phy_type : 2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++                unsigned hs_phy_type : 2;
++                unsigned point2point : 1;
++                unsigned architecture : 2;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++                unsigned op_mode : 3;
++        } b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                /* GHWCFG3 */
++                unsigned dfifo_depth : 16;
++                unsigned reserved15_13 : 3;
++                unsigned ahb_phy_clock_synch : 1;
++                unsigned synch_reset_type : 1;
++                unsigned optional_features : 1;
++                unsigned vendor_ctrl_if : 1;
++                unsigned i2c : 1;
++                unsigned otg_func : 1;
++                unsigned packet_size_cntr_width : 3;
++                unsigned xfer_size_cntr_width : 4;
++        } b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++unsigned reserved31_30 : 2;	/* fscz */
++		unsigned num_in_eps : 4;
++		unsigned ded_fifo_en : 1;
++
++                unsigned session_end_filt_en : 1;                
++                unsigned b_valid_filt_en : 1;                
++                unsigned a_valid_filt_en : 1;
++                unsigned vbus_valid_filt_en : 1;
++                unsigned iddig_filt_en : 1;
++                unsigned num_dev_mode_ctrl_ep : 4;
++                unsigned utmi_phy_data_width : 2;
++                unsigned min_ahb_freq : 9;
++                unsigned power_optimiz : 1;
++                unsigned num_dev_perio_in_ep : 4;
++        } b;
++} hwcfg4_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs 
++{
++        /** Device Configuration Register. <i>Offset 800h</i> */
++        volatile uint32_t dcfg; 
++        /** Device Control Register. <i>Offset: 804h</i> */
++        volatile uint32_t dctl; 
++        /** Device Status Register (Read Only). <i>Offset: 808h</i> */
++        volatile uint32_t dsts; 
++        /** Reserved. <i>Offset: 80Ch</i> */
++        uint32_t unused;      	
++        /** Device IN Endpoint Common Interrupt Mask
++         * Register. <i>Offset: 810h</i> */
++        volatile uint32_t diepmsk; 
++        /** Device OUT Endpoint Common Interrupt Mask
++         * Register. <i>Offset: 814h</i> */
++        volatile uint32_t doepmsk; 	
++        /** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
++        volatile uint32_t daint; 	
++        /** Device All Endpoints Interrupt Mask Register.  <i>Offset:
++         * 81Ch</i> */
++        volatile uint32_t daintmsk; 
++        /** Device IN Token Queue Read Register-1 (Read Only).
++         * <i>Offset: 820h</i> */
++        volatile uint32_t dtknqr1; 	
++        /** Device IN Token Queue Read Register-2 (Read Only).
++         * <i>Offset: 824h</i> */ 
++        volatile uint32_t dtknqr2; 	
++        /** Device VBUS  discharge Register.  <i>Offset: 828h</i> */
++        volatile uint32_t dvbusdis; 	
++        /** Device VBUS Pulse Register.  <i>Offset: 82Ch</i> */
++        volatile uint32_t dvbuspulse;
++        /** Device IN Token Queue Read Register-3 (Read Only).
++    	 *  Device Thresholding control register (Read/Write)
++	 * <i>Offset: 830h</i> */
++	    volatile uint32_t dtknqr3_dthrctl;
++    	/** Device IN Token Queue Read Register-4 (Read Only). /
++	 *  Device IN EPs empty Inr. Mask Register (Read/Write)
++         * <i>Offset: 834h</i> */ 
++	    volatile uint32_t dtknqr4_fifoemptymsk;
++} dwc_otg_device_global_regs_t; 
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.  Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                unsigned reserved31_23 : 9;
++                /** In Endpoint Mis-match count */
++                unsigned epmscnt : 5;
++                unsigned reserved13_17 : 5;
++                /** Periodic Frame Interval */
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++                unsigned perfrint : 2;
++                /** Device Addresses */
++                unsigned devaddr : 7;
++                unsigned reserved3 : 1;
++                /** Non Zero Length Status OUT Handshake */
++#define DWC_DCFG_SEND_STALL 1
++                unsigned nzstsouthshk : 1;
++                /** Device Speed */
++                unsigned devspd : 2;
++        } b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved : 20;
++		/** Power-On Programming Done */
++		unsigned pwronprgdone : 1;
++		/** Clear Global OUT NAK */
++		unsigned cgoutnak : 1;
++		/** Set Global OUT NAK */
++		unsigned sgoutnak : 1;
++		/** Clear Global Non-Periodic IN NAK */
++		unsigned cgnpinnak : 1;
++		/** Set Global Non-Periodic IN NAK */
++		unsigned sgnpinnak : 1;
++		/** Test Control */
++		unsigned tstctl : 3;
++		/** Global OUT NAK Status */
++		unsigned goutnaksts : 1;
++		/** Global Non-Periodic IN NAK Status */
++		unsigned gnpinnaksts : 1;
++		/** Soft Disconnect */
++		unsigned sftdiscon : 1;
++		/** Remote Wakeup */
++		unsigned rmtwkupsig : 1;
++	} b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved22_31 : 10;
++		/** Frame or Microframe Number of the received SOF */
++		unsigned soffn : 14;
++		unsigned reserved4_7: 4;
++		/** Erratic Error */
++		unsigned errticerr : 1;
++		/** Enumerated Speed */
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ           2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ          3
++		unsigned enumspd : 2;
++		/** Suspend Status */
++		unsigned suspsts : 1;
++        } b;
++} dsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *   bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved07_31 : 23;
++		unsigned txfifoundrn : 1;
++		/** IN Endpoint HAK Effective mask */
++        unsigned emptyintr : 1;
++		/** IN Endpoint NAK Effective mask */
++		unsigned inepnakeff : 1;
++		/** IN Token Received with EP mismatch mask */
++		unsigned intknepmis : 1;
++		/** IN Token received with TxF Empty mask */
++		unsigned intktxfemp : 1;
++		/** TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned timeout : 1;
++		/** AHB Error mask */
++		unsigned ahberr : 1;
++		/** Endpoint disable mask */
++		unsigned epdisabled : 1;
++		/** Transfer complete mask */
++		unsigned xfercompl : 1;
++        } b;
++} diepint_data_t;
++/**
++ * This union represents the bit fields in the Device IN EP Common
++ * Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *   bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved04_31 : 27;
++		/** OUT Token Received when Endpoint Disabled */
++		unsigned outtknepdis : 1;
++		/** Setup Phase Done (contorl EPs) */
++		unsigned setup : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** Endpoint disable  */
++		unsigned epdisabled : 1;
++		/** Transfer complete */
++		unsigned xfercompl : 1;
++        } b;
++} doepint_data_t;
++/**
++ * This union represents the bit fields in the Device OUT EP Common
++ * Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *   bits using the <i>b</i>it elements.
++ */
++typedef union daint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** OUT Endpoint bits */
++		unsigned out : 16;
++		/** IN Endpoint bits */
++		unsigned in : 16;
++        } ep;
++	struct {
++		/** OUT Endpoint bits */
++		unsigned outep15 : 1;
++		unsigned outep14 : 1;
++		unsigned outep13 : 1;
++		unsigned outep12 : 1;
++		unsigned outep11 : 1;
++		unsigned outep10 : 1;
++		unsigned outep9  : 1;
++		unsigned outep8  : 1;
++		unsigned outep7  : 1;
++		unsigned outep6  : 1;
++		unsigned outep5  : 1;
++		unsigned outep4  : 1;
++		unsigned outep3  : 1;
++		unsigned outep2  : 1;
++		unsigned outep1  : 1;
++		unsigned outep0  : 1;
++		/** IN Endpoint bits */
++		unsigned inep15 : 1;
++		unsigned inep14 : 1;
++		unsigned inep13 : 1;
++		unsigned inep12 : 1;
++		unsigned inep11 : 1;
++		unsigned inep10 : 1;
++		unsigned inep9  : 1;
++		unsigned inep8  : 1;
++		unsigned inep7  : 1;
++		unsigned inep6  : 1;
++		unsigned inep5  : 1;
++		unsigned inep4  : 1;
++		unsigned inep3  : 1;
++		unsigned inep2  : 1;
++		unsigned inep1  : 1;
++		unsigned inep0  : 1;
++        } b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                /** EP Numbers of IN Tokens 0 ... 4 */
++                unsigned epnums0_5 : 24;
++                /** write pointer has wrapped. */
++                unsigned wrap_bit : 1;
++                /** Reserved */
++                unsigned reserved05_06 : 2;
++                /** In Token Queue Write Pointer */
++                unsigned intknwptr : 5;
++        }b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data			//* /*fscz */
++{
++    /** raw register data */
++    uint32_t d32;
++    /** register bits */
++    struct {
++        /** Reserved */
++        unsigned reserved26_31 : 6;
++        /** Rx Thr. Length */
++        unsigned rx_thr_len : 9;
++        /** Rx Thr. Enable */
++        unsigned rx_thr_en : 1;
++        /** Reserved */
++        unsigned reserved11_15 : 5;
++        /** Tx Thr. Length */
++        unsigned tx_thr_len : 9;
++        /** ISO Tx Thr. Enable */
++        unsigned iso_thr_en : 1;
++        /** non ISO Tx Thr. Enable */
++        unsigned non_iso_thr_en : 1;
++
++    }b;
++} dthrctl_data_t;
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs 
++{
++        /** Device IN Endpoint Control Register. <i>Offset:900h +
++         * (ep_num * 20h) + 00h</i> */
++        volatile uint32_t diepctl;
++        /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++        uint32_t reserved04;    
++        /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++         * (ep_num * 20h) + 08h</i> */
++        volatile uint32_t diepint; 
++        /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++        uint32_t reserved0C;    
++        /** Device IN Endpoint Transfer Size
++         * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++        volatile uint32_t dieptsiz; 
++        /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++         * (ep_num * 20h) + 14h</i> */
++        volatile uint32_t diepdma; 
++        /** Reserved. <i>Offset:900h + (ep_num * 20h) + 18h - 900h +
++         * (ep_num * 20h) + 1Ch</i>*/
++	    volatile uint32_t dtxfsts;
++    	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 1Ch - 900h +
++	     * (ep_num * 20h) + 1Ch</i>*/
++    	uint32_t reserved18;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs 
++{
++        /** Device OUT Endpoint Control Register. <i>Offset:B00h +
++         * (ep_num * 20h) + 00h</i> */
++        volatile uint32_t doepctl; 
++        /** Device OUT Endpoint Frame number Register.  <i>Offset:
++         * B00h + (ep_num * 20h) + 04h</i> */ 
++        volatile uint32_t doepfn; 
++        /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++         * (ep_num * 20h) + 08h</i> */
++        volatile uint32_t doepint; 
++        /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++        uint32_t reserved0C;    
++        /** Device OUT Endpoint Transfer Size Register. <i>Offset:
++         * B00h + (ep_num * 20h) + 10h</i> */
++        volatile uint32_t doeptsiz; 
++        /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++         * + (ep_num * 20h) + 14h</i> */
++        volatile uint32_t doepdma; 
++        /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 18h - B00h +
++         * (ep_num * 20h) + 1Ch</i> */
++        uint32_t unused[2];     
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		/** Endpoint Enable */
++		unsigned epena : 1;
++		/** Endpoint Disable */
++		unsigned epdis : 1;
++                /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++                 * Writing to this field sets the Endpoint DPID (DPID)
++                 * field in this register to DATA1 Set Odd
++                 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++                 * Writing to this field sets the Even/Odd
++                 * (micro)frame (EO_FrNum) field to odd (micro) frame.
++                 */
++                unsigned setd1pid : 1;
++                /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++                 * Writing to this field sets the Endpoint DPID (DPID)
++                 * field in this register to DATA0. Set Even
++                 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++                 * Writing to this field sets the Even/Odd
++                 * (micro)frame (EO_FrNum) field to even (micro)
++                 * frame.
++                 */
++                unsigned setd0pid : 1;
++		/** Set NAK */
++		unsigned snak : 1;
++		/** Clear NAK */
++		unsigned cnak : 1;
++		/** Tx Fifo Number 
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned txfnum : 4;
++		/** Stall Handshake */
++		unsigned stall : 1;
++		/** Snoop Mode 
++		 * OUT EPn/OUT EP0
++		 * IN EPn/IN EP0 - reserved */
++		unsigned snp : 1;
++		/** Endpoint Type 
++		 *  2'b00: Control
++		 *  2'b01: Isochronous
++		 *  2'b10: Bulk
++		 *  2'b11: Interrupt */
++		unsigned eptype : 2;
++		/** NAK Status */
++		unsigned naksts : 1;
++		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++                 * This field contains the PID of the packet going to
++                 * be received or transmitted on this endpoint. The
++                 * application should program the PID of the first
++                 * packet going to be received or transmitted on this
++                 * endpoint , after the endpoint is
++                 * activated. Application use the SetD1PID and
++                 * SetD0PID fields of this register to program either
++                 * D0 or D1 PID.
++                 * 
++                 * The encoding for this field is
++                 *   - 0: D0
++                 *   - 1: D1
++                 */
++		unsigned dpid : 1;
++		/** USB Active Endpoint */
++		unsigned usbactep : 1;
++		/** Next Endpoint 
++		 * IN EPn/IN EP0 
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned nextep : 4;
++		/** Maximum Packet Size 
++		 * IN/OUT EPn
++		 * IN/OUT EP0 - 2 bits
++		 *   2'b00: 64 Bytes
++		 *   2'b01: 32
++		 *   2'b10: 16
++		 *   2'b11: 8 */
++#define DWC_DEP0CTL_MPS_64   0
++#define DWC_DEP0CTL_MPS_32   1
++#define DWC_DEP0CTL_MPS_16   2
++#define DWC_DEP0CTL_MPS_8    3
++		unsigned mps : 11;
++        } b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved : 1;
++		/** Multi Count - Periodic IN endpoints */
++		unsigned mc : 2;
++		/** Packet Count */
++		unsigned pktcnt : 10;
++		/** Transfer size */
++		unsigned xfersize : 19;
++        } b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++                unsigned reserved31 : 1;
++                /**Setup Packet Count (DOEPTSIZ0 Only) */
++                unsigned supcnt : 2;
++                /** Reserved */
++		unsigned reserved28_20 : 9;
++		/** Packet Count */
++		unsigned pktcnt : 1;
++                /** Reserved */
++		unsigned reserved18_7 : 12;
++		/** Transfer size */
++		unsigned xfersize : 7;
++        } b;
++} deptsiz0_data_t;
++
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of TX FIFOs */
++#define MAX_TX_FIFOS 15
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++//#define MAX_EPS_CHANNELS 4
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if {
++        /** Pointer to device Global registers.
++         * Device Global Registers starting at offset 800h
++         */
++        dwc_otg_device_global_regs_t *dev_global_regs; 
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++        /** 
++         * Device Logical IN Endpoint-Specific Registers 900h-AFCh 
++         */
++        dwc_otg_dev_in_ep_regs_t     *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++        /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++        dwc_otg_dev_out_ep_regs_t    *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++        /* Device configuration information*/
++        uint8_t  speed;              /**< Device Speed  0: Unknown, 1: LS, 2:FS, 3: HS */
++        //uint8_t  num_eps;            /**< Number of EPs  range: 0-16 (includes EP0) */
++        //uint8_t  num_perio_eps;      /**< # of Periodic EP range: 0-15 */
++	/*fscz */
++    uint8_t  num_in_eps;         /**< Number # of Tx EP range: 0-15 exept ep0 */
++    uint8_t  num_out_eps;        /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++        /** Size of periodic FIFOs (Bytes) */
++        uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];  
++
++	/** Size of Tx FIFOs (Bytes) */
++	uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flags and length varaiables **/
++	uint16_t rx_thr_en;
++	uint16_t iso_tx_thr_en;
++	uint16_t non_iso_tx_thr_en;
++
++	uint16_t rx_thr_length;
++	uint16_t tx_thr_length;
++} dwc_otg_dev_if_t;
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data	
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned reserved31_05 : 27;
++		/** PHY Suspended */
++		unsigned physuspended : 1;
++		/** Reset Power Down Modules */
++		unsigned rstpdwnmodule : 1;
++		/** Power Clamp */
++		unsigned pwrclmp : 1;
++		/** Gate Hclk */
++		unsigned gatehclk : 1;
++		/** Stop Pclk */
++		unsigned stoppclk : 1;
++	} b;
++} pcgcctl_data_t;
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers.  Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs 
++{
++        /** Host Configuration Register.   <i>Offset: 400h</i> */
++        volatile uint32_t hcfg;       
++        /** Host Frame Interval Register.   <i>Offset: 404h</i> */
++        volatile uint32_t hfir;       
++        /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++        volatile uint32_t hfnum; 
++        /** Reserved.   <i>Offset: 40Ch</i> */
++        uint32_t reserved40C;
++        /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++        volatile uint32_t hptxsts;    
++        /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++        volatile uint32_t haint;      
++        /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++        volatile uint32_t haintmsk;   
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++                /** Reserved */
++		//unsigned reserved31_03 : 29;
++		/** FS/LS Only Support */
++		unsigned fslssupp : 1;
++		/** FS/LS Phy Clock Select */
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ    1
++#define DWC_HCFG_6_MHZ     2
++		unsigned fslspclksel : 2;
++        } b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.  
++ */
++typedef union hfir_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		unsigned reserved : 16;
++		unsigned frint : 16;
++        } b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.  
++ */
++typedef union hfnum_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		unsigned frrem : 16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++		unsigned frnum : 16;
++        } b;
++} hfnum_data_t;
++
++typedef union hptxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Top of the Periodic Transmit Request Queue
++		 *  - bit 24 - Terminate (last entry for the selected channel)
++		 *  - bits 26:25 - Token Type
++		 *    - 2'b00 - Zero length
++		 *    - 2'b01 - Ping
++		 *    - 2'b10 - Disable
++		 *  - bits 30:27 - Channel Number
++		 *  - bit 31 - Odd/even microframe
++		 */
++		unsigned ptxqtop_odd : 1;
++		unsigned ptxqtop_chnum : 4;
++		unsigned ptxqtop_token : 2;
++		unsigned ptxqtop_terminate : 1;
++		unsigned ptxqspcavail : 8;
++		unsigned ptxfspcavail : 16;
++	} b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved19_31 : 13;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED  2
++		unsigned prtspd : 2;
++		unsigned prttstctl : 4;
++		unsigned prtpwr : 1;
++		unsigned prtlnsts : 2;
++		unsigned reserved9 : 1;
++		unsigned prtrst : 1;
++		unsigned prtsusp : 1;
++		unsigned prtres : 1;
++		unsigned prtovrcurrchng : 1;
++		unsigned prtovrcurract : 1;
++		unsigned prtenchng : 1;
++		unsigned prtena : 1;
++		unsigned prtconndet : 1;
++		unsigned prtconnsts : 1;
++        } b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt 
++ * Register.  
++ */
++typedef union haint_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved : 16;
++		unsigned ch15 : 1;
++		unsigned ch14 : 1;
++		unsigned ch13 : 1;
++		unsigned ch12 : 1;
++		unsigned ch11 : 1;
++		unsigned ch10 : 1;
++		unsigned ch9 : 1;
++		unsigned ch8 : 1;
++		unsigned ch7 : 1;
++		unsigned ch6 : 1;
++		unsigned ch5 : 1;
++		unsigned ch4 : 1;
++		unsigned ch3 : 1;
++		unsigned ch2 : 1;
++		unsigned ch1 : 1;
++		unsigned ch0 : 1;
++	} b;
++        struct {
++		unsigned reserved : 16;
++		unsigned chint : 16;
++	} b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt 
++ * Register.  
++ */
++typedef union haintmsk_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		unsigned reserved : 16;
++		unsigned ch15 : 1;
++		unsigned ch14 : 1;
++		unsigned ch13 : 1;
++		unsigned ch12 : 1;
++		unsigned ch11 : 1;
++		unsigned ch10 : 1;
++		unsigned ch9 : 1;
++		unsigned ch8 : 1;
++		unsigned ch7 : 1;
++		unsigned ch6 : 1;
++		unsigned ch5 : 1;
++		unsigned ch4 : 1;
++		unsigned ch3 : 1;
++		unsigned ch2 : 1;
++		unsigned ch1 : 1;
++		unsigned ch0 : 1;
++	} b;
++        struct {
++		unsigned reserved : 16;
++		unsigned chint : 16;
++	} b2;
++} haintmsk_data_t;
++
++/** 
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs 
++{
++        /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++        volatile uint32_t hcchar;     
++        /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++        volatile uint32_t hcsplt;     
++        /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++        volatile uint32_t hcint;
++        /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++        volatile uint32_t hcintmsk;
++        /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++        volatile uint32_t hctsiz;
++        /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++        volatile uint32_t hcdma;
++        /** Reserved.  <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
++        uint32_t reserved[2];
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		/** Channel enable */
++		unsigned chen : 1;
++		/** Channel disable */
++		unsigned chdis : 1;
++		/**
++		 * Frame to transmit periodic transaction.
++		 * 0: even, 1: odd
++		 */
++		unsigned oddfrm : 1;
++		/** Device address */
++		unsigned devaddr : 7;
++		/** Packets per frame for periodic transfers. 0 is reserved. */
++		unsigned multicnt : 2;
++		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned eptype : 2;
++		/** 0: Full/high speed device, 1: Low speed device */
++		unsigned lspddev : 1;
++		unsigned reserved : 1;
++		/** 0: OUT, 1: IN */
++		unsigned epdir : 1;
++		/** Endpoint number */
++		unsigned epnum : 4;
++		/** Maximum packet size in bytes */
++		unsigned mps : 11;
++        } b;
++} hcchar_data_t;
++
++typedef union hcsplt_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		/** Split Enble */
++		unsigned spltena : 1;
++		/** Reserved */
++		unsigned reserved : 14;
++		/** Do Complete Split */
++		unsigned compsplt : 1;
++		/** Transaction Position */
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++		unsigned xactpos : 2;
++		/** Hub Address */
++		unsigned hubaddr : 7;
++		/** Port Address */
++		unsigned prtaddr : 7;
++	} b;
++} hcsplt_data_t;
++
++
++/**
++ * This union represents the bit fields in the Host All Interrupt 
++ * Register.  
++ */
++typedef union hcint_data
++{
++        /** raw register data */
++        uint32_t d32;
++        /** register bits */
++        struct {
++		/** Reserved */
++		unsigned reserved : 21;
++		/** Data Toggle Error */
++		unsigned datatglerr : 1;
++		/** Frame Overrun */
++		unsigned frmovrun : 1;
++		/** Babble Error */
++		unsigned bblerr : 1;
++		/** Transaction Err */
++		unsigned xacterr : 1;
++		/** NYET Response Received */
++		unsigned nyet : 1;
++		/** ACK Response Received */
++		unsigned ack : 1;
++		/** NAK Response Received */
++		unsigned nak : 1;
++		/** STALL Response Received */
++		unsigned stall : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** Channel Halted */
++		unsigned chhltd : 1;
++		/** Transfer Complete */
++		unsigned xfercomp : 1;
++	} b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hctsiz_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		/** Do PING protocol when 1 */
++		unsigned dopng : 1;
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3		
++		unsigned pid : 2;
++		/** Data packets to transfer */
++		unsigned pktcnt : 10;
++		/** Total transfer size in bytes */
++		unsigned xfersize : 19;
++        } b;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data
++{
++        /** raw register data */
++        uint32_t d32;
++
++        /** register bits */
++        struct {
++		unsigned reserved : 21;
++		unsigned datatglerr : 1;
++		unsigned frmovrun : 1;
++		unsigned bblerr : 1;
++		unsigned xacterr : 1;
++		unsigned nyet : 1;
++		unsigned ack : 1;
++		unsigned nak : 1;
++		unsigned stall : 1;
++		unsigned ahberr : 1;
++		unsigned chhltd : 1;
++		unsigned xfercompl : 1;
++        } b;
++} hcintmsk_data_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if {
++        /** Host Global Registers starting at offset 400h.*/
++        dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 
++
++        /** Host Port 0 Control and Status Register */
++        volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++        
++
++        /** Host Channel Specific Registers at offsets 500h-5FCh. */
++        dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++
++        /* Host configuration information */
++        /** Number of Host Channels (range: 1-16) */
++        uint8_t  num_host_channels;    
++        /** Periodic EPs supported (0: no, 1: yes) */
++        uint8_t  perio_eps_supported;
++        /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++        uint16_t perio_tx_fifo_size;   
++  
++} dwc_otg_host_if_t;
++
++#endif
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -4,3 +4,4 @@
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY4010) += mach-easy4010.o
+ obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
++onj-y += dev-dwc_otg.o
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dev-dwc_otg.c
+@@ -0,0 +1,64 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mtd/physmap.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/etherdevice.h>
++#include <linux/reboot.h>
++#include <linux/time.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++
++#include <xway.h>
++#include <xway_irq.h>
++#include <lantiq_platform.h>
++
++static struct resource resources[] =
++{
++	[0] = {
++		.name    = "dwc_otg_membase",
++		.start   = IFX_USB_IOMEM_BASE,
++		.end	   = IFX_USB_IOMEM_BASE + IFX_USB_IOMEM_SIZE - 1,
++		.flags	 = IORESOURCE_MEM,
++	},
++	[1] = {
++		.name    = "dwc_otg_irq",
++		.start   = IFX_USB_IRQ,
++		.flags   = IORESOURCE_IRQ,
++	},
++};
++
++static u64 dwc_dmamask = (u32)0x1fffffff;
++
++static struct platform_device platform_dev = {
++	.name = "dwc_otg",
++	.dev = {
++		.dma_mask      = &dwc_dmamask,
++	},
++	.resource		= resources,
++	.num_resources		= ARRAY_SIZE(resources),
++};
++
++int __init
++xway_register_dwc(int pin)
++{
++	lq_enable_irq(resources[1].start);
++	return platform_device_register(&platform_dev);
++}
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dev-dwc_otg.h
+@@ -0,0 +1,17 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LQ_DEV_DWC_H__
++#define _LQ_DEV_DWC_H__
++
++#include <lantiq_platform.h>
++
++extern void __init xway_register_dwc(int pin);
++
++#endif
+--- a/arch/mips/lantiq/xway/mach-arv45xx.c
++++ b/arch/mips/lantiq/xway/mach-arv45xx.c
+@@ -24,6 +24,7 @@
+ #include <lantiq_platform.h>
+ 
+ #include "devices.h"
++#include "dev-dwc_otg.h"
+ 
+ #define ARV452_LATCH_SWITCH		(1 << 10)
+ 
+@@ -133,6 +134,7 @@
+ 	lq_register_pci(&lq_pci_data);
+ 	lq_register_wdt();
+ 	arv45xx_register_ethernet();
++	xway_register_dwc(14);
+ }
+ 
+ MIPS_MACHINE(LANTIQ_MACH_ARV4518,
+@@ -152,6 +154,7 @@
+ 	lq_register_pci(&lq_pci_data);
+ 	lq_register_wdt();
+ 	arv45xx_register_ethernet();
++	xway_register_dwc(28);
+ }
+ 
+ MIPS_MACHINE(LANTIQ_MACH_ARV452,
diff --git a/target/linux/lantiq/patches/809-mt-vpe.patch b/target/linux/lantiq/patches/809-mt-vpe.patch
new file mode 100644
index 0000000000..07312c7747
--- /dev/null
+++ b/target/linux/lantiq/patches/809-mt-vpe.patch
@@ -0,0 +1,1173 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1669,6 +1669,28 @@ config MIPS_VPE_LOADER
+ 	  Includes a loader for loading an elf relocatable object
+ 	  onto another VPE and running it.
+ 
++config IFX_VPE_EXT
++	bool "IFX APRP Extensions"
++	depends on MIPS_VPE_LOADER
++	default y
++	help
++	  IFX included extensions in APRP
++
++config PERFCTRS
++	bool "34K Performance counters"
++	depends on MIPS_MT && PROC_FS
++	default n
++	help
++	  34K Performance counter through /proc
++
++config MTSCHED
++	bool "Support mtsched priority configuration for TCs"
++	depends on MIPS_MT && PROC_FS
++	default y
++	help
++	  Support for mtsched priority configuration for TCs through
++	  /proc/mips/mtsched
++
+ config MIPS_MT_SMTC_IM_BACKSTOP
+ 	bool "Use per-TC register bits as backstop for inhibited IM bits"
+ 	depends on MIPS_MT_SMTC
+--- a/arch/mips/include/asm/mipsmtregs.h
++++ b/arch/mips/include/asm/mipsmtregs.h
+@@ -28,14 +28,34 @@
+ #define read_c0_vpeconf0()		__read_32bit_c0_register($1, 2)
+ #define write_c0_vpeconf0(val)		__write_32bit_c0_register($1, 2, val)
+ 
++#define read_c0_vpeconf1()              __read_32bit_c0_register($1, 3)
++#define write_c0_vpeconf1(val)          __write_32bit_c0_register($1, 3, val)
++
++#define read_c0_vpeschedule()           __read_32bit_c0_register($1, 5)
++#define write_c0_vpeschedule(val)       __write_32bit_c0_register($1, 5, val)
++
++#define read_c0_vpeschefback()      	__read_32bit_c0_register($1, 6)
++#define write_c0_vpeschefback(val)  	__write_32bit_c0_register($1, 6, val)
++
++#define read_c0_vpeopt()              __read_32bit_c0_register($1, 7)
++#define write_c0_vpeopt(val)          __write_32bit_c0_register($1, 7, val)
++
+ #define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
+ #define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)
+ 
+ #define read_c0_tcbind()		__read_32bit_c0_register($2, 2)
++#define write_c0_tcbind(val)		__write_32bit_c0_register($2, 2, val)
+ 
+ #define read_c0_tccontext()		__read_32bit_c0_register($2, 5)
+ #define write_c0_tccontext(val)		__write_32bit_c0_register($2, 5, val)
+ 
++#define read_c0_tcschedule()		__read_32bit_c0_register($2, 6)
++#define write_c0_tcschedule(val)	__write_32bit_c0_register($2, 6, val)
++
++#define read_c0_tcschefback()		__read_32bit_c0_register($2, 7)
++#define write_c0_tcschefback(val)	__write_32bit_c0_register($2, 7, val)
++
++
+ #else /* Assembly */
+ /*
+  * Macros for use in assembly language code
+@@ -74,6 +94,8 @@
+ #define MVPCONTROL_STLB_SHIFT	2
+ #define MVPCONTROL_STLB		(_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+ 
++#define MVPCONTROL_CPA_SHIFT	3
++#define MVPCONTROL_CPA		(_ULCAST_(1) << MVPCONTROL_CPA_SHIFT)
+ 
+ /* MVPConf0 fields */
+ #define MVPCONF0_PTC_SHIFT	0
+@@ -84,6 +106,8 @@
+ #define MVPCONF0_TCA		( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+ #define MVPCONF0_PTLBE_SHIFT	16
+ #define MVPCONF0_PTLBE		(_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
++#define MVPCONF0_PCP_SHIFT	27
++#define MVPCONF0_PCP		(_ULCAST_(1) << MVPCONF0_PCP_SHIFT)
+ #define MVPCONF0_TLBS_SHIFT	29
+ #define MVPCONF0_TLBS		(_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+ #define MVPCONF0_M_SHIFT	31
+@@ -121,9 +145,25 @@
+ #define VPECONF0_VPA		(_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+ #define VPECONF0_MVP_SHIFT	1
+ #define VPECONF0_MVP		(_ULCAST_(1) << VPECONF0_MVP_SHIFT)
++#define VPECONF0_ICS_SHIFT      16
++#define VPECONF0_ICS		(_ULCAST_(1) << VPECONF0_ICS_SHIFT)
++#define VPECONF0_DCS_SHIFT      17
++#define VPECONF0_DCS            (_ULCAST_(1) << VPECONF0_DCS_SHIFT)
+ #define VPECONF0_XTC_SHIFT	21
+ #define VPECONF0_XTC		(_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+ 
++/* VPEOpt fields */
++#define VPEOPT_DWX_SHIFT	0
++#define VPEOPT_IWX_SHIFT	8
++#define VPEOPT_IWX0		( _ULCAST_(0x1) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX1		( _ULCAST_(0x2) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX2		( _ULCAST_(0x4) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX3		( _ULCAST_(0x8) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_DWX0		( _ULCAST_(0x1) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX1		( _ULCAST_(0x2) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX2		( _ULCAST_(0x4) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX3		( _ULCAST_(0x8) << VPEOPT_DWX_SHIFT)
++
+ /* TCStatus fields (per TC) */
+ #define TCSTATUS_TASID		(_ULCAST_(0xff))
+ #define TCSTATUS_IXMT_SHIFT	10
+@@ -350,6 +390,14 @@ do {									\
+ #define write_vpe_c0_vpecontrol(val)	mttc0(1, 1, val)
+ #define read_vpe_c0_vpeconf0()		mftc0(1, 2)
+ #define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
++#define read_vpe_c0_vpeschedule()	mftc0(1, 5)
++#define write_vpe_c0_vpeschedule(val)	mttc0(1, 5, val)
++#define read_vpe_c0_vpeschefback()	mftc0(1, 6)
++#define write_vpe_c0_vpeschefback(val)	mttc0(1, 6, val)
++#define read_vpe_c0_vpeopt()            mftc0(1, 7)
++#define write_vpe_c0_vpeopt(val)        mttc0(1, 7, val)
++#define read_vpe_c0_wired()		mftc0(6, 0)
++#define write_vpe_c0_wired(val)		mttc0(6, 0, val)
+ #define read_vpe_c0_count()		mftc0(9, 0)
+ #define write_vpe_c0_count(val)		mttc0(9, 0, val)
+ #define read_vpe_c0_status()		mftc0(12, 0)
+@@ -381,6 +429,12 @@ do {									\
+ #define write_tc_c0_tchalt(val)		mttc0(2, 4, val)
+ #define read_tc_c0_tccontext()		mftc0(2, 5)
+ #define write_tc_c0_tccontext(val)	mttc0(2, 5, val)
++#define read_tc_c0_tcschedule()		mftc0(2, 6)
++#define write_tc_c0_tcschedule(val)	mttc0(2, 6, val)
++#define read_tc_c0_tcschefback()	mftc0(2, 7)
++#define write_tc_c0_tcschefback(val)	mttc0(2, 7, val)
++#define read_tc_c0_entryhi()            mftc0(10, 0)
++#define write_tc_c0_entryhi(val)        mttc0(10, 0, val)
+ 
+ /* GPR */
+ #define read_tc_gpr_sp()		mftgpr(29)
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -84,7 +84,8 @@ obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo3
+ 
+ obj-$(CONFIG_KGDB)		+= kgdb.o
+ obj-$(CONFIG_PROC_FS)		+= proc.o
+-
++obj-$(CONFIG_MTSCHED)		+= mtsched_proc.o
++obj-$(CONFIG_PERFCTRS)		+= perf_proc.o
+ obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
+ 
+ obj-$(CONFIG_I8253)		+= i8253.o
+--- a/arch/mips/kernel/mips-mt.c
++++ b/arch/mips/kernel/mips-mt.c
+@@ -21,26 +21,95 @@
+ #include <asm/cacheflush.h>
+ 
+ int vpelimit;
+-
+ static int __init maxvpes(char *str)
+ {
+ 	get_option(&str, &vpelimit);
+-
+ 	return 1;
+ }
+-
+ __setup("maxvpes=", maxvpes);
+ 
+ int tclimit;
+-
+ static int __init maxtcs(char *str)
+ {
+ 	get_option(&str, &tclimit);
++	return 1;
++}
++__setup("maxtcs=", maxtcs);
+ 
++#ifdef CONFIG_IFX_VPE_EXT
++int stlb;
++static int __init istlbshared(char *str)
++{
++	get_option(&str, &stlb);
+ 	return 1;
+ }
++__setup("vpe_tlb_shared=", istlbshared);
+ 
+-__setup("maxtcs=", maxtcs);
++int vpe0_wired;
++static int __init vpe0wired(char *str)
++{
++	get_option(&str, &vpe0_wired);
++	return 1;
++}
++__setup("vpe0_wired_tlb_entries=", vpe0wired);
++
++int vpe1_wired;
++static int __init vpe1wired(char *str)
++{
++	get_option(&str, &vpe1_wired);
++	return 1;
++}
++__setup("vpe1_wired_tlb_entries=", vpe1wired);
++
++#ifdef CONFIG_MIPS_MT_SMTC
++extern int nostlb;
++#endif
++void configure_tlb(void)
++{
++	int vpeflags, tcflags, tlbsiz;
++	unsigned int config1val;
++	vpeflags = dvpe();
++	tcflags = dmt();
++	write_c0_vpeconf0((read_c0_vpeconf0() | VPECONF0_MVP));
++	write_c0_mvpcontrol((read_c0_mvpcontrol() | MVPCONTROL_VPC));
++	mips_ihb();
++	//printk("stlb = %d, vpe0_wired = %d vpe1_wired=%d\n", stlb,vpe0_wired, vpe1_wired);
++	if (stlb) {
++		if (!(read_c0_mvpconf0() & MVPCONF0_TLBS)) {
++			emt(tcflags);
++			evpe(vpeflags);
++			return;
++		}
++
++		write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
++		write_c0_wired(vpe0_wired + vpe1_wired);
++		if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
++			config1val = read_vpe_c0_config1();
++			tlbsiz = (((config1val >> 25) & 0x3f) + 1);
++			if (tlbsiz > 64)
++				tlbsiz = 64;
++			cpu_data[0].tlbsize = current_cpu_data.tlbsize = tlbsiz;
++		}
++
++	}
++	else {
++		write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_STLB);
++		write_c0_wired(vpe0_wired);
++	}
++
++	ehb();
++	write_c0_mvpcontrol((read_c0_mvpcontrol() & ~MVPCONTROL_VPC));
++	ehb();
++	local_flush_tlb_all();
++
++	printk("Wired TLB entries for Linux read_c0_wired() = %d\n", read_c0_wired());
++#ifdef CONFIG_MIPS_MT_SMTC
++	nostlb = !stlb;
++#endif
++	emt(tcflags);
++	evpe(vpeflags);
++}
++#endif
+ 
+ /*
+  * Dump new MIPS MT state for the core. Does not leave TCs halted.
+@@ -78,18 +147,18 @@ void mips_mt_regdump(unsigned long mvpct
+ 			if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
+ 				printk("  VPE %d\n", i);
+ 				printk("   VPEControl : %08lx\n",
+-				       read_vpe_c0_vpecontrol());
++					read_vpe_c0_vpecontrol());
+ 				printk("   VPEConf0 : %08lx\n",
+-				       read_vpe_c0_vpeconf0());
++					read_vpe_c0_vpeconf0());
+ 				printk("   VPE%d.Status : %08lx\n",
+-				       i, read_vpe_c0_status());
++					i, read_vpe_c0_status());
+ 				printk("   VPE%d.EPC : %08lx %pS\n",
+-				       i, read_vpe_c0_epc(),
+-				       (void *) read_vpe_c0_epc());
++					i, read_vpe_c0_epc(),
++					(void *) read_vpe_c0_epc());
+ 				printk("   VPE%d.Cause : %08lx\n",
+-				       i, read_vpe_c0_cause());
++					i, read_vpe_c0_cause());
+ 				printk("   VPE%d.Config7 : %08lx\n",
+-				       i, read_vpe_c0_config7());
++					i, read_vpe_c0_config7());
+ 				break; /* Next VPE */
+ 			}
+ 		}
+@@ -287,6 +356,9 @@ void mips_mt_set_cpuoptions(void)
+ 		printk("Mapped %ld ITC cells starting at 0x%08x\n",
+ 			((itcblkgrn & 0x7fe00000) >> 20), itc_base);
+ 	}
++#ifdef CONFIG_IFX_VPE_EXT
++	configure_tlb();
++#endif
+ }
+ 
+ /*
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -7,6 +7,7 @@
+ #include <linux/kernel.h>
+ #include <linux/sched.h>
+ #include <linux/seq_file.h>
++#include <linux/proc_fs.h>
+ #include <asm/bootinfo.h>
+ #include <asm/cpu.h>
+ #include <asm/cpu-features.h>
+@@ -108,3 +109,19 @@ const struct seq_operations cpuinfo_op =
+ 	.stop	= c_stop,
+ 	.show	= show_cpuinfo,
+ };
++
++/*
++ * Support for MIPS/local /proc hooks in /proc/mips/
++ */
++
++static struct proc_dir_entry *mips_proc = NULL;
++
++struct proc_dir_entry *get_mips_proc_dir(void)
++{
++       /*
++        * This ought not to be preemptable.
++        */
++       if(mips_proc == NULL)
++               mips_proc = proc_mkdir("mips", NULL);
++       return(mips_proc);
++}
+--- a/arch/mips/kernel/smtc.c
++++ b/arch/mips/kernel/smtc.c
+@@ -1335,6 +1335,13 @@ void smtc_get_new_mmu_context(struct mm_
+ 	asid = asid_cache(cpu);
+ 
+ 	do {
++#ifdef CONFIG_IFX_VPE_EXT
++		/* If TLB is shared between AP and RP (AP is running SMTC),
++		   leave out max ASID i.e., ASID_MASK for RP
++		 */
++		if (!nostlb && ((asid & ASID_MASK) == (ASID_MASK - 1)))
++			asid++;
++#endif
+ 		if (!((asid += ASID_INC) & ASID_MASK) ) {
+ 			if (cpu_has_vtag_icache)
+ 				flush_icache_all();
+--- a/arch/mips/kernel/vpe.c
++++ b/arch/mips/kernel/vpe.c
+@@ -77,6 +77,58 @@ static struct kspd_notifications kspd_ev
+ static int kspd_events_reqd;
+ #endif
+ 
++#ifdef CONFIG_IFX_VPE_EXT
++static int is_sdepgm;
++extern int stlb;
++extern int vpe0_wired;
++extern int vpe1_wired;
++unsigned int vpe1_load_addr;
++
++static int __init load_address(char *str)
++{
++	get_option(&str, &vpe1_load_addr);
++	return 1;
++}
++__setup("vpe1_load_addr=", load_address);
++
++#include <asm/mipsmtregs.h>
++#define write_vpe_c0_wired(val)		mttc0(6, 0, val)
++
++#ifndef COMMAND_LINE_SIZE
++#	define COMMAND_LINE_SIZE	512
++#endif
++
++char command_line[COMMAND_LINE_SIZE * 2];
++
++static unsigned int vpe1_mem;
++static int __init vpe1mem(char *str)
++{
++	vpe1_mem = memparse(str, &str);
++	return 1;
++}
++__setup("vpe1_mem=", vpe1mem);
++
++uint32_t vpe1_wdog_ctr;
++static int __init wdog_ctr(char *str)
++{
++	get_option(&str, &vpe1_wdog_ctr);
++	return 1;
++}
++
++__setup("vpe1_wdog_ctr_addr=", wdog_ctr);
++EXPORT_SYMBOL(vpe1_wdog_ctr);
++
++uint32_t vpe1_wdog_timeout;
++static int __init wdog_timeout(char *str)
++{
++        get_option(&str, &vpe1_wdog_timeout);
++        return 1;
++}
++
++__setup("vpe1_wdog_timeout=", wdog_timeout);
++EXPORT_SYMBOL(vpe1_wdog_timeout);
++
++#endif
+ /* grab the likely amount of memory we will need. */
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ #define P_SIZE (2 * 1024 * 1024)
+@@ -269,6 +321,13 @@ static void *alloc_progmem(unsigned long
+ 	void *addr;
+ 
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
++#ifdef CONFIG_IFX_VPE_EXT
++	if (vpe1_load_addr) {
++		memset((void *)vpe1_load_addr, 0, len);
++		return (void *)vpe1_load_addr;
++	}
++#endif
++
+ 	/*
+ 	 * This means you must tell Linux to use less memory than you
+ 	 * physically have, for example by passing a mem= boot argument.
+@@ -747,6 +806,12 @@ static int vpe_run(struct vpe * v)
+ 	}
+ 
+ 	/* Write the address we want it to start running from in the TCPC register. */
++#if defined(CONFIG_IFX_VPE_EXT) && 0
++	if (stlb)
++		write_vpe_c0_wired(vpe0_wired + vpe1_wired);
++	else
++		write_vpe_c0_wired(vpe1_wired);
++#endif
+ 	write_tc_c0_tcrestart((unsigned long)v->__start);
+ 	write_tc_c0_tccontext((unsigned long)0);
+ 
+@@ -760,6 +825,20 @@ static int vpe_run(struct vpe * v)
+ 
+ 	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+ 
++#if defined(CONFIG_IFX_VPE_EXT) && 0
++	/*
++	 * $a2 & $a3 are used to pass command line parameters to VPE1. $a2
++	 * points to the start of the command line string and $a3 points to
++	 * the end of the string. This convention is identical to the Linux
++	 * kernel boot parameter passing mechanism. Please note that $a3 is
++	 * used to pass physical memory size or 0 in SDE tool kit. So, if you
++	 * are passing comand line parameters through $a2 & $a3 SDE programs
++	 * don't work as desired.
++	 */
++	mttgpr(6, command_line);
++	mttgpr(7, (command_line + strlen(command_line)));
++	if (is_sdepgm)
++#endif
+ 	/*
+ 	 * The sde-kit passes 'memsize' to __start in $a3, so set something
+ 	 * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and
+@@ -834,6 +913,9 @@ static int find_vpe_symbols(struct vpe *
+ 	if ( (v->__start == 0) || (v->shared_ptr == NULL))
+ 		return -1;
+ 
++#ifdef CONFIG_IFX_VPE_EXT
++	is_sdepgm = 1;
++#endif
+ 	return 0;
+ }
+ 
+@@ -995,6 +1077,15 @@ static int vpe_elfload(struct vpe * v)
+ 			   (unsigned long)v->load_addr + v->len);
+ 
+ 	if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
++#ifdef CONFIG_IFX_VPE_EXT
++		if (vpe1_load_addr) {
++			/* Conversion to KSEG1 is required ??? */
++			v->__start = KSEG1ADDR(vpe1_load_addr);
++			is_sdepgm = 0;
++			return 0;
++		}
++#endif
++
+ 		if (v->__start == 0) {
+ 			printk(KERN_WARNING "VPE loader: program does not contain "
+ 			       "a __start symbol\n");
+@@ -1065,6 +1156,9 @@ static int vpe_open(struct inode *inode,
+ 	struct vpe_notifications *not;
+ 	struct vpe *v;
+ 	int ret;
++#ifdef CONFIG_IFX_VPE_EXT
++   int progsize;
++#endif
+ 
+ 	if (minor != iminor(inode)) {
+ 		/* assume only 1 device at the moment. */
+@@ -1091,14 +1185,23 @@ static int vpe_open(struct inode *inode,
+ 		cleanup_tc(get_tc(tclimit));
+ 	}
+ 
++#ifdef CONFIG_IFX_VPE_EXT
++	progsize = (vpe1_mem  != 0) ? vpe1_mem : P_SIZE;
++	//printk("progsize = %x\n", progsize);
++	v->pbuffer = vmalloc(progsize);
++	v->plen = progsize;
++#else
+ 	/* this of-course trashes what was there before... */
+ 	v->pbuffer = vmalloc(P_SIZE);
+ 	v->plen = P_SIZE;
++#endif
+ 	v->load_addr = NULL;
+ 	v->len = 0;
+ 
++#if 0
+ 	v->uid = filp->f_cred->fsuid;
+ 	v->gid = filp->f_cred->fsgid;
++#endif
+ 
+ #ifdef CONFIG_MIPS_APSP_KSPD
+ 	/* get kspd to tell us when a syscall_exit happens */
+@@ -1351,6 +1454,133 @@ static void kspd_sp_exit( int sp_id)
+ 	cleanup_tc(get_tc(sp_id));
+ }
+ #endif
++#ifdef CONFIG_IFX_VPE_EXT
++int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags)
++{
++	enum vpe_state state;
++	struct vpe *v = get_vpe(tclimit);
++	struct vpe_notifications *not;
++
++	if (tcmask || flags) {
++		printk(KERN_WARNING "Currently tcmask and flags should be 0.\
++				other values not supported\n");
++		return -1;
++	}
++
++	state = xchg(&v->state, VPE_STATE_INUSE);
++	if (state != VPE_STATE_UNUSED) {
++		vpe_stop(v);
++
++		list_for_each_entry(not, &v->notify, list) {
++			not->stop(tclimit);
++		}
++	}
++
++	v->__start = (unsigned long)sw_start_addr;
++	is_sdepgm = 0;
++
++	if (!vpe_run(v)) {
++		printk(KERN_DEBUG "VPE loader: VPE1 running successfully\n");
++		return 0;
++	}
++	return -1;
++}
++
++EXPORT_SYMBOL(vpe1_sw_start);
++
++int32_t vpe1_sw_stop(uint32_t flags)
++{
++	struct vpe *v = get_vpe(tclimit);
++
++	if (!vpe_free(v)) {
++		printk(KERN_DEBUG "RP Stopped\n");
++		return 0;
++	}
++	else
++		return -1;
++}
++
++EXPORT_SYMBOL(vpe1_sw_stop);
++
++uint32_t vpe1_get_load_addr (uint32_t flags)
++{
++	return vpe1_load_addr;
++}
++
++EXPORT_SYMBOL(vpe1_get_load_addr);
++
++uint32_t vpe1_get_max_mem (uint32_t flags)
++{
++	if (!vpe1_mem)
++		return P_SIZE;
++	else
++		return vpe1_mem;
++}
++
++EXPORT_SYMBOL(vpe1_get_max_mem);
++
++void* vpe1_get_cmdline_argument(void)
++{
++	return saved_command_line;
++}
++
++EXPORT_SYMBOL(vpe1_get_cmdline_argument);
++
++int32_t vpe1_set_boot_param(char *field, char *value, char flags)
++{
++	char *ptr, string[64];
++	int start_off, end_off;
++	if (!field)
++		return -1;
++	strcpy(string, field);
++	if (value) {
++		strcat(string, "=");
++		strcat(string, value);
++		strcat(command_line, " ");
++		strcat(command_line, string);
++	}
++	else {
++		ptr = strstr(command_line, string);
++		if (ptr) {
++			start_off = ptr - command_line;
++			ptr += strlen(string);
++			while ((*ptr != ' ') && (*ptr != '\0'))
++				ptr++;
++			end_off = ptr - command_line;
++			command_line[start_off] = '\0';
++			strcat (command_line, command_line+end_off);
++		}
++	}
++	return 0;
++}
++
++EXPORT_SYMBOL(vpe1_set_boot_param);
++
++int32_t vpe1_get_boot_param(char *field, char **value, char flags)
++{
++	char *ptr, string[64];
++	int i = 0;
++	if (!field)
++		return -1;
++	if ((ptr = strstr(command_line, field))) {
++		ptr += strlen(field) + 1; /* including = */
++		while ((*ptr != ' ') && (*ptr != '\0'))
++			string[i++] = *ptr++;
++		string[i] = '\0';
++		*value = kmalloc((strlen(string) + 1), GFP_KERNEL);
++		if (*value != NULL)
++			strcpy(*value, string);
++	}
++	else
++		*value = NULL;
++
++	return 0;
++}
++
++EXPORT_SYMBOL(vpe1_get_boot_param);
++
++extern void configure_tlb(void);
++#endif
+ 
+ static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
+ 			  const char *buf, size_t len)
+@@ -1432,6 +1662,18 @@ static int __init vpe_module_init(void)
+ 		printk("VPE loader: not a MIPS MT capable processor\n");
+ 		return -ENODEV;
+ 	}
++#ifdef CONFIG_IFX_VPE_EXT
++#ifndef CONFIG_MIPS_MT_SMTC
++	configure_tlb();
++#endif
++#endif
++
++#ifndef CONFIG_MIPS_MT_SMTC
++	if (!vpelimit)
++		vpelimit = 1;
++	if (!tclimit)
++		tclimit = 1;
++#endif
+ 
+ 	if (vpelimit == 0) {
+ 		printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
+@@ -1476,10 +1718,12 @@ static int __init vpe_module_init(void)
+ 	mtflags = dmt();
+ 	vpflags = dvpe();
+ 
++	back_to_back_c0_hazard();
++
+ 	/* Put MVPE's into 'configuration state' */
+ 	set_c0_mvpcontrol(MVPCONTROL_VPC);
+ 
+-	/* dump_mtregs(); */
++	dump_mtregs();
+ 
+ 	val = read_c0_mvpconf0();
+ 	hw_tcs = (val & MVPCONF0_PTC) + 1;
+@@ -1491,6 +1735,7 @@ static int __init vpe_module_init(void)
+ 		 * reschedule send IPIs or similar we might hang.
+ 		 */
+ 		clear_c0_mvpcontrol(MVPCONTROL_VPC);
++		back_to_back_c0_hazard();
+ 		evpe(vpflags);
+ 		emt(mtflags);
+ 		local_irq_restore(flags);
+@@ -1516,6 +1761,7 @@ static int __init vpe_module_init(void)
+ 			}
+ 
+ 			v->ntcs = hw_tcs - tclimit;
++                        write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
+ 
+ 			/* add the tc to the list of this vpe's tc's. */
+ 			list_add(&t->tc, &v->tc);
+@@ -1584,6 +1830,7 @@ static int __init vpe_module_init(void)
+ out_reenable:
+ 	/* release config state */
+ 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
++	back_to_back_c0_hazard();
+ 
+ 	evpe(vpflags);
+ 	emt(mtflags);
+--- /dev/null
++++ b/arch/mips/kernel/mtsched_proc.c
+@@ -0,0 +1,279 @@
++/*
++ * /proc hooks for MIPS MT scheduling policy management for 34K cores
++ *
++ *  This program is free software; you can distribute it and/or modify it
++ *  under the terms of the GNU General Public License (Version 2) as
++ *  published by the Free Software Foundation.
++ *
++ *  This program is distributed in the hope it will be useful, but WITHOUT
++ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++ *  for more details.
++ *
++ *  You should have received a copy of the GNU General Public License along
++ *  with this program; if not, write to the Free Software Foundation, Inc.,
++ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Copyright (C) 2006 Mips Technologies, Inc
++ */
++
++#include <linux/kernel.h>
++
++#include <asm/cpu.h>
++#include <asm/processor.h>
++#include <asm/system.h>
++#include <asm/mipsregs.h>
++#include <asm/mipsmtregs.h>
++#include <asm/uaccess.h>
++#include <linux/proc_fs.h>
++
++static struct proc_dir_entry *mtsched_proc;
++
++#ifndef CONFIG_MIPS_MT_SMTC
++#define NTCS 2
++#else
++#define NTCS NR_CPUS
++#endif
++#define NVPES 2
++
++int lastvpe = 1;
++int lasttc = 8;
++
++static int proc_read_mtsched(char *page, char **start, off_t off,
++			int count, int *eof, void *data)
++{
++	int totalen = 0;
++	int len;
++
++	int i;
++	int vpe;
++	int mytc;
++	unsigned long flags;
++	unsigned int mtflags;
++	unsigned int haltstate;
++	unsigned int vpes_checked[NVPES];
++	unsigned int vpeschedule[NVPES];
++	unsigned int vpeschefback[NVPES];
++	unsigned int tcschedule[NTCS];
++	unsigned int tcschefback[NTCS];
++
++	/* Dump the state of the MIPS MT scheduling policy manager */
++	/* Inititalize control state */
++	for(i = 0; i < NVPES; i++) {
++		vpes_checked[i] = 0;
++		vpeschedule[i] = 0;
++		vpeschefback[i] = 0;
++	}
++	for(i = 0; i < NTCS; i++) {
++		tcschedule[i] = 0;
++		tcschefback[i] = 0;
++	}
++
++	/* Disable interrupts and multithreaded issue */
++	local_irq_save(flags);
++	mtflags = dvpe();
++
++	/* Then go through the TCs, halt 'em, and extract the values */
++	mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
++	for(i = 0; i < NTCS; i++) {
++		if(i == mytc) {
++			/* No need to halt ourselves! */
++			tcschedule[i] = read_c0_tcschedule();
++			tcschefback[i] = read_c0_tcschefback();
++			/* If VPE bound to TC hasn't been checked, do it */
++			vpe = read_c0_tcbind() & TCBIND_CURVPE;
++			if(!vpes_checked[vpe]) {
++				vpeschedule[vpe] = read_c0_vpeschedule();
++				vpeschefback[vpe] = read_c0_vpeschefback();
++				vpes_checked[vpe] = 1;
++			}
++		} else {
++			settc(i);
++			haltstate = read_tc_c0_tchalt();
++			write_tc_c0_tchalt(TCHALT_H);
++			mips_ihb();
++			tcschedule[i] = read_tc_c0_tcschedule();
++			tcschefback[i] = read_tc_c0_tcschefback();
++			/* If VPE bound to TC hasn't been checked, do it */
++			vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
++			if(!vpes_checked[vpe]) {
++			    vpeschedule[vpe] = read_vpe_c0_vpeschedule();
++			    vpeschefback[vpe] = read_vpe_c0_vpeschefback();
++			    vpes_checked[vpe] = 1;
++			}
++			if(!haltstate) write_tc_c0_tchalt(0);
++		}
++	}
++	/* Re-enable MT and interrupts */
++	evpe(mtflags);
++	local_irq_restore(flags);
++
++	for(vpe=0; vpe < NVPES; vpe++) {
++		len = sprintf(page, "VPE[%d].VPEschedule  = 0x%08x\n",
++			vpe, vpeschedule[vpe]);
++		totalen += len;
++		page += len;
++		len = sprintf(page, "VPE[%d].VPEschefback = 0x%08x\n",
++			vpe, vpeschefback[vpe]);
++		totalen += len;
++		page += len;
++	}
++	for(i=0; i < NTCS; i++) {
++		len = sprintf(page, "TC[%d].TCschedule    = 0x%08x\n",
++			i, tcschedule[i]);
++		totalen += len;
++		page += len;
++		len = sprintf(page, "TC[%d].TCschefback   = 0x%08x\n",
++			i, tcschefback[i]);
++		totalen += len;
++		page += len;
++	}
++	return totalen;
++}
++
++/*
++ * Write to perf counter registers based on text input
++ */
++
++#define TXTBUFSZ 1024
++
++static int proc_write_mtsched(struct file *file, const char *buffer,
++				unsigned long count, void *data)
++{
++	int len = 0;
++	char mybuf[TXTBUFSZ];
++	/* At most, we will set up 9 TCs and 2 VPEs, 11 entries in all */
++	char entity[1];   //, entity1[1];
++	int number[1];
++	unsigned long value[1];
++	int nparsed = 0 , index = 0;
++	unsigned long flags;
++	unsigned int mtflags;
++	unsigned int haltstate;
++	unsigned int tcbindval;
++
++	if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
++	else len = count;
++	memset(mybuf,0,TXTBUFSZ);
++	if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
++
++	nparsed = sscanf(mybuf, "%c%d %lx",
++		 &entity[0] ,&number[0], &value[0]);
++
++	/*
++	 * Having acquired the inputs, which might have
++	 * generated exceptions and preemptions,
++	 * program the registers.
++	 */
++	/* Disable interrupts and multithreaded issue */
++	local_irq_save(flags);
++	mtflags = dvpe();
++
++	if(entity[index] == 't' ) {
++		/* Set TCSchedule or TCScheFBack of specified TC */
++		if(number[index] > NTCS) goto skip;
++		/* If it's our own TC, do it direct */
++		if(number[index] ==
++				((read_c0_tcbind() & TCBIND_CURTC)
++				>> TCBIND_CURTC_SHIFT)) {
++			if(entity[index] == 't')
++				 write_c0_tcschedule(value[index]);
++			else
++				write_c0_tcschefback(value[index]);
++		} else {
++		/* Otherwise, we do it via MTTR */
++			settc(number[index]);
++			haltstate = read_tc_c0_tchalt();
++			write_tc_c0_tchalt(TCHALT_H);
++			mips_ihb();
++			if(entity[index] == 't')
++				 write_tc_c0_tcschedule(value[index]);
++			else
++				write_tc_c0_tcschefback(value[index]);
++			mips_ihb();
++			if(!haltstate) write_tc_c0_tchalt(0);
++		}
++	} else if(entity[index] == 'v') {
++		/* Set VPESchedule of specified VPE */
++		if(number[index] > NVPES) goto skip;
++		tcbindval = read_c0_tcbind();
++		/* Are we doing this to our current VPE? */
++		if((tcbindval & TCBIND_CURVPE) == number[index]) {
++			/* Then life is simple */
++			write_c0_vpeschedule(value[index]);
++		} else {
++			/*
++			 * Bind ourselves to the other VPE long enough
++			 * to program the bind value.
++			 */
++			write_c0_tcbind((tcbindval & ~TCBIND_CURVPE)
++					   | number[index]);
++			mips_ihb();
++			write_c0_vpeschedule(value[index]);
++			mips_ihb();
++			/* Restore previous binding */
++			write_c0_tcbind(tcbindval);
++			mips_ihb();
++		}
++	}
++
++	else if(entity[index] == 'r') {
++		unsigned int vpes_checked[2], vpe ,i , mytc;
++		vpes_checked[0] = vpes_checked[1] = 0;
++
++		/* Then go through the TCs, halt 'em, and extract the values */
++		mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
++
++		for(i = 0; i < NTCS; i++) {
++			if(i == mytc) {
++				/* No need to halt ourselves! */
++				write_c0_vpeschefback(0);
++				write_c0_tcschefback(0);
++			} else {
++				settc(i);
++				haltstate = read_tc_c0_tchalt();
++				write_tc_c0_tchalt(TCHALT_H);
++				mips_ihb();
++				write_tc_c0_tcschefback(0);
++				/* If VPE bound to TC hasn't been checked, do it */
++				vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
++				if(!vpes_checked[vpe]) {
++				    write_vpe_c0_vpeschefback(0);
++				    vpes_checked[vpe] = 1;
++				}
++				if(!haltstate) write_tc_c0_tchalt(0);
++			}
++		}
++	}
++	else {
++		printk ("\n Usage : <t/v><0/1> <Hex Value>\n Example : t0 0x01\n");
++	}
++
++skip:
++	/* Re-enable MT and interrupts */
++	evpe(mtflags);
++	local_irq_restore(flags);
++	return (len);
++}
++
++static int __init init_mtsched_proc(void)
++{
++	extern struct proc_dir_entry *get_mips_proc_dir(void);
++	struct proc_dir_entry *mips_proc_dir;
++
++	if (!cpu_has_mipsmt) {
++		printk("mtsched: not a MIPS MT capable processor\n");
++		return -ENODEV;
++	}
++
++	mips_proc_dir = get_mips_proc_dir();
++
++	mtsched_proc = create_proc_entry("mtsched", 0644, mips_proc_dir);
++	mtsched_proc->read_proc = proc_read_mtsched;
++	mtsched_proc->write_proc = proc_write_mtsched;
++
++	return 0;
++}
++
++/* Automagically create the entry */
++module_init(init_mtsched_proc);
+--- /dev/null
++++ b/arch/mips/kernel/perf_proc.c
+@@ -0,0 +1,191 @@
++/*
++ * /proc hooks for CPU performance counter support for SMTC kernel
++ * (and ultimately others)
++ * Copyright (C) 2006 Mips Technologies, Inc
++ */
++
++#include <linux/kernel.h>
++
++#include <asm/cpu.h>
++#include <asm/processor.h>
++#include <asm/system.h>
++#include <asm/mipsregs.h>
++#include <asm/uaccess.h>
++#include <linux/proc_fs.h>
++
++/*
++ * /proc diagnostic and statistics hooks
++ */
++
++
++/* Internal software-extended event counters */
++
++static unsigned long long extencount[4] = {0,0,0,0};
++
++static struct proc_dir_entry *perf_proc;
++
++static int proc_read_perf(char *page, char **start, off_t off,
++				int count, int *eof, void *data)
++{
++	int totalen = 0;
++	int len;
++
++	len = sprintf(page, "PerfCnt[0].Ctl : 0x%08x\n", read_c0_perfctrl0());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[0].Cnt : %Lu\n",
++		extencount[0] + (unsigned long long)((unsigned)read_c0_perfcntr0()));
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[1].Ctl : 0x%08x\n", read_c0_perfctrl1());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[1].Cnt : %Lu\n",
++		extencount[1] + (unsigned long long)((unsigned)read_c0_perfcntr1()));
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[2].Ctl : 0x%08x\n", read_c0_perfctrl2());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[2].Cnt : %Lu\n",
++		extencount[2] + (unsigned long long)((unsigned)read_c0_perfcntr2()));
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[3].Ctl : 0x%08x\n", read_c0_perfctrl3());
++	totalen += len;
++	page += len;
++	len = sprintf(page, "PerfCnt[3].Cnt : %Lu\n",
++		extencount[3] + (unsigned long long)((unsigned)read_c0_perfcntr3()));
++	totalen += len;
++	page += len;
++
++	return totalen;
++}
++
++/*
++ * Write to perf counter registers based on text input
++ */
++
++#define TXTBUFSZ 1024
++
++static int proc_write_perf(struct file *file, const char *buffer,
++				unsigned long count, void *data)
++{
++	int len;
++	int nparsed;
++	int index;
++	char mybuf[TXTBUFSZ];
++
++	int which[4];
++	unsigned long control[4];
++	long long ctrdata[4];
++
++	if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
++	else len = count;
++	memset(mybuf,0,TXTBUFSZ);
++	if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
++
++	nparsed = sscanf(mybuf,
++			"%d %lx %Ld %d %lx %Ld %d %lx %Ld %d %lx %Ld",
++				&which[0], &control[0], &ctrdata[0],
++				&which[1], &control[1], &ctrdata[1],
++				&which[2], &control[2], &ctrdata[2],
++				&which[3], &control[3], &ctrdata[3]);
++
++	for(index = 0; nparsed >= 3; index++) {
++		switch (which[index]) {
++		case 0:
++			write_c0_perfctrl0(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[0] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr0((unsigned long)0);
++			}
++			break;
++		case 1:
++			write_c0_perfctrl1(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[1] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr1((unsigned long)0);
++			}
++			break;
++		case 2:
++			write_c0_perfctrl2(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[2] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr2((unsigned long)0);
++			}
++			break;
++		case 3:
++			write_c0_perfctrl3(control[index]);
++			if(ctrdata[index] != -1) {
++			    extencount[3] = (unsigned long long)ctrdata[index];
++			    write_c0_perfcntr3((unsigned long)0);
++			}
++			break;
++		}
++		nparsed -= 3;
++	}
++	return (len);
++}
++
++extern int (*perf_irq)(void);
++
++/*
++ * Invoked when timer interrupt vector picks up a perf counter overflow
++ */
++
++static int perf_proc_irq(void)
++{
++	unsigned long snapshot;
++
++	/*
++	 * It would be nice to do this as a loop, but we don't have
++	 * indirect access to CP0 registers.
++	 */
++	snapshot = read_c0_perfcntr0();
++	if ((long)snapshot < 0) {
++		extencount[0] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr0());
++		write_c0_perfcntr0(0);
++	}
++	snapshot = read_c0_perfcntr1();
++	if ((long)snapshot < 0) {
++		extencount[1] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr1());
++		write_c0_perfcntr1(0);
++	}
++	snapshot = read_c0_perfcntr2();
++	if ((long)snapshot < 0) {
++		extencount[2] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr2());
++		write_c0_perfcntr2(0);
++	}
++	snapshot = read_c0_perfcntr3();
++	if ((long)snapshot < 0) {
++		extencount[3] +=
++			(unsigned long long)((unsigned)read_c0_perfcntr3());
++		write_c0_perfcntr3(0);
++	}
++	return 0;
++}
++
++static int __init init_perf_proc(void)
++{
++	extern struct proc_dir_entry *get_mips_proc_dir(void);
++
++	struct proc_dir_entry *mips_proc_dir = get_mips_proc_dir();
++
++	write_c0_perfcntr0(0);
++	write_c0_perfcntr1(0);
++	write_c0_perfcntr2(0);
++	write_c0_perfcntr3(0);
++	perf_proc = create_proc_entry("perf", 0644, mips_proc_dir);
++	perf_proc->read_proc = proc_read_perf;
++	perf_proc->write_proc = proc_write_perf;
++	perf_irq = perf_proc_irq;
++
++	return 0;
++}
++
++/* Automagically create the entry */
++module_init(init_perf_proc);
diff --git a/target/linux/lantiq/patches/810-ar9-cache-split.patch b/target/linux/lantiq/patches/810-ar9-cache-split.patch
new file mode 100644
index 0000000000..9487f6ce43
--- /dev/null
+++ b/target/linux/lantiq/patches/810-ar9-cache-split.patch
@@ -0,0 +1,301 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1706,6 +1706,28 @@
+ 	help
+ 	  IFX included extensions in APRP
+ 
++config IFX_VPE_CACHE_SPLIT
++	bool "IFX Cache Split Ways"
++	depends on IFX_VPE_EXT
++	help
++	  IFX extension for reserving (splitting) cache ways among VPEs. You must
++	  give kernel command line arguments vpe_icache_shared=0 or
++	  vpe_dcache_shared=0 to enable splitting of icache or dcache
++	  respectively. Then you can specify which cache ways should be
++	  assigned to which VPE. There are total 8 cache ways, 4 each
++	  for dcache and icache: dcache_way0, dcache_way1,dcache_way2,
++	  dcache_way3 and icache_way0,icache_way1, icache_way2,icache_way3.
++
++	  For example, if you specify vpe_icache_shared=0 and icache_way2=1,
++	  then the 3rd icache way will be assigned to VPE0 and denied in VPE1.
++
++	  For icache, software is required to make at least one cache way available
++	  for a VPE at all times i.e., one can't assign all the icache ways to one
++	  VPE.
++
++	  By default, vpe_dcache_shared and vpe_icache_shared are set to 1
++	  (i.e., both icache and dcache are shared among VPEs)
++
+ config PERFCTRS
+ 	bool "34K Performance counters"
+ 	depends on MIPS_MT && PROC_FS
+--- a/arch/mips/kernel/vpe.c
++++ b/arch/mips/kernel/vpe.c
+@@ -128,6 +128,13 @@
+ EXPORT_SYMBOL(vpe1_wdog_timeout);
+ 
+ #endif
++
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
++extern int vpe_icache_shared,vpe_dcache_shared;
++extern int icache_way0,icache_way1,icache_way2,icache_way3;
++extern int dcache_way0,dcache_way1,dcache_way2,dcache_way3;
++#endif
++
+ /* grab the likely amount of memory we will need. */
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ #define P_SIZE (2 * 1024 * 1024)
+@@ -866,6 +873,65 @@
+ 	/* enable this VPE */
+ 	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+ 
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
++	if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ) {
++
++		/* PCP bit must be 1 to split the cache */
++		if(read_c0_mvpconf0() & MVPCONF0_PCP) {
++
++			if ( !vpe_icache_shared ){
++				write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_ICS);
++
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE1. Otherwise assign that way to VPE1.
++				 */
++				if (!icache_way0)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX0 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX0 );
++				if (!icache_way1)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX1 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX1 );
++				if (!icache_way2)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX2 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX2 );
++				if (!icache_way3)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX3 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX3 );
++			}
++
++			if ( !vpe_dcache_shared ) {
++				write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_DCS);
++
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE1. Otherwise assign that way to VPE1.
++				 */
++				if (!dcache_way0)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX0 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX0 );
++				if (!dcache_way1)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX1 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX1 );
++				if (!dcache_way2)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX2 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX2 );
++				if (!dcache_way3)
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX3 );
++				else
++					write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX3 );
++			}
++		}
++	}
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ 	/* clear out any left overs from a previous program */
+ 	write_vpe_c0_status(0);
+ 	write_vpe_c0_cause(0);
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -1348,6 +1348,106 @@
+ __setup("coherentio", setcoherentio);
+ #endif
+ 
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
++
++#include <asm/mipsmtregs.h>
++
++/*
++ * By default, vpe_icache_shared and vpe_dcache_shared
++ * values are 1 i.e., both icache and dcache are shared
++ * among the VPEs.
++ */
++
++int vpe_icache_shared = 1;
++static int __init vpe_icache_shared_val(char *str)
++{
++	get_option(&str, &vpe_icache_shared);
++	return 1;
++}
++__setup("vpe_icache_shared=", vpe_icache_shared_val);
++EXPORT_SYMBOL(vpe_icache_shared);
++
++int vpe_dcache_shared = 1;
++static int __init vpe_dcache_shared_val(char *str)
++{
++	get_option(&str, &vpe_dcache_shared);
++	return 1;
++}
++__setup("vpe_dcache_shared=", vpe_dcache_shared_val);
++EXPORT_SYMBOL(vpe_dcache_shared);
++
++/*
++ * Software is required to make atleast one icache
++ * way available for a VPE at all times i.e., one
++ * can't assign all the icache ways to one VPE.
++ */
++
++int icache_way0 = 0;
++static int __init icache_way0_val(char *str)
++{
++	get_option(&str, &icache_way0);
++	return 1;
++}
++__setup("icache_way0=", icache_way0_val);
++
++int icache_way1 = 0;
++static int __init icache_way1_val(char *str)
++{
++	get_option(&str, &icache_way1);
++	return 1;
++}
++__setup("icache_way1=", icache_way1_val);
++
++int icache_way2 = 0;
++static int __init icache_way2_val(char *str)
++{
++	get_option(&str, &icache_way2);
++	return 1;
++}
++__setup("icache_way2=", icache_way2_val);
++
++int icache_way3 = 0;
++static int __init icache_way3_val(char *str)
++{
++	get_option(&str, &icache_way3);
++	return 1;
++}
++__setup("icache_way3=", icache_way3_val);
++
++int dcache_way0 = 0;
++static int __init dcache_way0_val(char *str)
++{
++	get_option(&str, &dcache_way0);
++	return 1;
++}
++__setup("dcache_way0=", dcache_way0_val);
++
++int dcache_way1 = 0;
++static int __init dcache_way1_val(char *str)
++{
++	get_option(&str, &dcache_way1);
++	return 1;
++}
++__setup("dcache_way1=", dcache_way1_val);
++
++int dcache_way2 = 0;
++static int __init dcache_way2_val(char *str)
++{
++	get_option(&str, &dcache_way2);
++	return 1;
++}
++__setup("dcache_way2=", dcache_way2_val);
++
++int dcache_way3 = 0;
++static int __init dcache_way3_val(char *str)
++{
++	get_option(&str, &dcache_way3);
++	return 1;
++}
++__setup("dcache_way3=", dcache_way3_val);
++
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ void __cpuinit r4k_cache_init(void)
+ {
+ 	extern void build_clear_page(void);
+@@ -1367,6 +1467,78 @@
+ 		break;
+ 	}
+ 
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
++	/*
++	 * We split the cache ways appropriately among the VPEs
++	 * based on cache ways values we received as command line
++	 * arguments
++	 */
++	if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ){
++
++		/* PCP bit must be 1 to split the cache */
++		if(read_c0_mvpconf0() & MVPCONF0_PCP) {
++
++			/* Set CPA bit which enables us to modify VPEOpt register */
++			write_c0_mvpcontrol((read_c0_mvpcontrol()) | MVPCONTROL_CPA);
++
++			if ( !vpe_icache_shared ){
++				write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_ICS);
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE0. Otherwise assign that way to VPE0.
++				 */
++				printk(KERN_DEBUG "icache is split\n");
++				printk(KERN_DEBUG "icache_way0=%d icache_way1=%d icache_way2=%d icache_way3=%d\n",
++					icache_way0, icache_way1,icache_way2, icache_way3);
++				if (icache_way0)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX0 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX0 );
++				if (icache_way1)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX1 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX1 );
++				if (icache_way2)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX2 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX2 );
++				if (icache_way3)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX3 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX3 );
++			}
++
++			if ( !vpe_dcache_shared ) {
++				/*
++				 * If any cache way is 1, then that way is denied
++				 * in VPE0. Otherwise assign that way to VPE0.
++				 */
++				printk(KERN_DEBUG "dcache is split\n");
++				printk(KERN_DEBUG "dcache_way0=%d dcache_way1=%d dcache_way2=%d dcache_way3=%d\n",
++					dcache_way0, dcache_way1, dcache_way2, dcache_way3);
++				write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_DCS);
++				if (dcache_way0)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX0 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX0 );
++				if (dcache_way1)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX1 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX1 );
++				if (dcache_way2)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX2 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX2 );
++				if (dcache_way3)
++					write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX3 );
++				else
++					write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX3 );
++			}
++		}
++	}
++
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ 	probe_pcache();
+ 	setup_scache();
+ 
diff --git a/target/linux/lantiq/patches/900-pci_ath5k_hook.patch b/target/linux/lantiq/patches/900-pci_ath5k_hook.patch
new file mode 100644
index 0000000000..f01cadc85e
--- /dev/null
+++ b/target/linux/lantiq/patches/900-pci_ath5k_hook.patch
@@ -0,0 +1,40 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/pci.h
+@@ -0,0 +1,14 @@
++/*
++ *  lantiq SoCs specific PCI definitions
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_LANTIQ_PCI_H
++#define __ASM_MACH_LANTIQ_PCI_H
++
++extern int (*ifxmips_pci_plat_dev_init)(struct pci_dev *dev);
++
++#endif
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -68,6 +68,8 @@
+ 
+ u32 lq_pci_mapped_cfg;
+ 
++int (*lqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
++
+ /* Since the PCI REQ pins can be reused for other functionality, make it possible
+    to exclude those from interpretation by the PCI controller */
+ static int lq_pci_req_mask = 0xf;
+@@ -126,6 +128,10 @@
+ 			printk ("WARNING: invalid interrupt pin %d\n", pin);
+ 			return 1;
+ 	}
++
++	if (lqpci_plat_dev_init)
++		return lqpci_plat_dev_init(dev);
++
+ 	return 0;
+ }
+ 
+
diff --git a/target/linux/lantiq/xway/config-default b/target/linux/lantiq/xway/config-default
new file mode 100644
index 0000000000..46cd6e778b
--- /dev/null
+++ b/target/linux/lantiq/xway/config-default
@@ -0,0 +1,21 @@
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_LANTIQ_ETOP=y
+CONFIG_LANTIQ_MACH_ARV45XX=y
+CONFIG_LANTIQ_MACH_EASY4010=y
+CONFIG_LANTIQ_MACH_EASY50712=y
+CONFIG_LANTIQ_MACH_EASY50812=y
+# CONFIG_LANTIQ_PROM_ASC0 is not set
+CONFIG_LANTIQ_PROM_ASC1=y
+CONFIG_LANTIQ_WDT=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LOONGSON_MC146818 is not set
+CONFIG_LOONGSON_UART_BASE=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_SCSI_MOD=y
+CONFIG_SOC_LANTIQ=y
+CONFIG_SOC_LANTIQ_XWAY=y
+CONFIG_USB_SUPPORT=y
diff --git a/target/linux/lantiq/xway/target.mk b/target/linux/lantiq/xway/target.mk
new file mode 100644
index 0000000000..e2e2a6f12b
--- /dev/null
+++ b/target/linux/lantiq/xway/target.mk
@@ -0,0 +1,11 @@
+ARCH:=mips
+SUBTARGET:=xway
+BOARDNAME:=Xway
+FEATURES:=squashfs jffs2 atm
+
+DEFAULT_PACKAGES+=uboot-lantiq-easy50712 kmod-pppoa ppp-mod-pppoa linux-atm atm-tools br2684ctl ifxmips-dsl-api ifxmips-dsl-control ifx-tapidemo
+
+define Target/Description
+	Lantiq XWAY (danube/twinpass/ar9)
+endef
+