lantiq: add support for ZTE H201L

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38048 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 161 insertions, 1 deletions

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
index e525ebdff2..e525ebdff2 100755..100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 6b0093c70b..a5cf212dde 100755..100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -84,6 +84,12 @@ GR7000)
 	ucidef_set_interface_wan "eth0"
 	uci set network.lan.ifname=''
 	;;
+
+H201L)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t"
+	;;
 esac
 
 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
diff --git a/target/linux/lantiq/dts/H201L.dts b/target/linux/lantiq/dts/H201L.dts
new file mode 100644
index 0000000000..5cb5612a37
--- /dev/null
+++ b/target/linux/lantiq/dts/H201L.dts
@@ -0,0 +1,139 @@
+/dts-v1/;
+
+/include/ "ar9.dtsi"
+
+/ {
+	model = "H201L - ZTE H210L";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "uboot_env";
+					reg = <0x20000 0x10000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "firmware";
+					reg = <0x30000 0x7d0000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rgmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 36 0>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 53 1>;
+			linux,code = <0x198>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 54 1>;
+			linux,code = <0x211>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 55 1>;
+			linux,code = <0xf7>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			gpios = <&gpio 19 1>;
+			default-state = "on";
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 37 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 4 1>;
+		};
+		phone {
+			label = "phone";
+			gpios = <&gpio 39 1>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 22 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 6 1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpio 14 1>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 38 0>;
+		};
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio 28 0>;
+		};
+		wifi {
+			gpio-export,name = "wifi";
+			gpio-export,output = <1>;
+			gpios = <&gpio 7 0>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index fea32bef22..c34b6b0dfa 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -7,7 +7,7 @@
 
 # boards missing since devicetree update
 #EASY50712 ARV3527P GIGASX76X BTHOMEHUBV2B BTHOMEHUBV2BOPENRG
-#WBMR P2601HNFX H201L
+#WBMR P2601HNFX
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
@@ -255,6 +255,9 @@ Image/Build/Profile/FRITZ7320=$(call Image/BuildEVA/$(1),$(1),FRITZ7320)
 Image/BuildKernel/Profile/GR7000=$(call Image/BuildKernel/Template,GR7000)
 Image/Build/Profile/GR7000=$(call Image/Build/$(1),$(1),GR7000)
 
+Image/BuildKernel/Profile/H201L=$(call Image/BuildKernel/Template,H201L)
+Image/Build/Profile/H201L=$(call Image/Build/$(1),$(1),H201L)
+
 endif
 
 
diff --git a/target/linux/lantiq/xway/profiles/zte.mk b/target/linux/lantiq/xway/profiles/zte.mk
new file mode 100644
index 0000000000..d6e70f2329
--- /dev/null
+++ b/target/linux/lantiq/xway/profiles/zte.mk
@@ -0,0 +1,12 @@
+define Profile/H201L
+  NAME:=ZTE H201L - H201L
+  PACKAGES:=kmod-ath9k-htc wpad-mini \
+	kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
+	kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
+	ltq-adsl-app ppp-mod-pppoe \
+	kmod-ltq-deu-ar9 kmod-ltq-hcd-ar9 \
+	kmod-ltq-tapi kmod-ltq-vmmc \
+	swconfig
+endef
+
+$(eval $(call Profile,H201L))