change prefix for kernelpatchbase 2.6.26

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13619 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 1024 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/1028-gta02-core.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1028-gta02-core.patch.patch
new file mode 100755
index 0000000000..e2ef84f91d
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.26/1028-gta02-core.patch.patch
@@ -0,0 +1,1024 @@
+From 330ac25864dd0a71f2d1cd7d58db103ee93f9125 Mon Sep 17 00:00:00 2001
+From: mokopatches <mokopatches@openmoko.org>
+Date: Wed, 16 Jul 2008 14:46:52 +0100
+Subject: [PATCH] gta02-core.patch
+
+---
+ arch/arm/mach-s3c2440/Kconfig        |   15 +
+ arch/arm/mach-s3c2440/Makefile       |    3 +
+ arch/arm/mach-s3c2440/mach-gta02.c   |  826 ++++++++++++++++++++++++++++++++++
+ drivers/leds/leds-neo1973-vibrator.c |    2 +-
+ include/asm-arm/arch-s3c2410/gta02.h |   99 ++++
+ sound/soc/s3c24xx/neo1973_wm8753.c   |    8 +
+ 6 files changed, 952 insertions(+), 1 deletions(-)
+ create mode 100644 arch/arm/mach-s3c2440/mach-gta02.c
+ create mode 100644 include/asm-arm/arch-s3c2410/gta02.h
+
+diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
+index f1915bd..6b317d1 100644
+--- a/arch/arm/mach-s3c2440/Kconfig
++++ b/arch/arm/mach-s3c2440/Kconfig
+@@ -68,5 +68,20 @@ config SMDK2440_CPU2440
+ 	select CPU_S3C2440
+ 
+ 
++config MACH_NEO1973_GTA02
++	bool "FIC Neo1973 GSM Phone (GTA02 Hardware)"
++	select CPU_S3C2442
++	select SENSORS_PCF50633
++	help
++	   Say Y here if you are using the FIC Neo1973 GSM Phone
++
++config NEO1973_GTA02_2440
++	bool "Old FIC Neo1973 GTA02 hardware using S3C2440 CPU"
++	depends on MACH_NEO1973_GTA02
++	select CPU_S3C2440
++	help
++	   Say Y here if you are using an early hardware revision
++	   of the FIC/OpenMoko Neo1973 GTA02 GSM Phone.
++
+ endmenu
+ 
+diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
+index c81ed62..1a4defd 100644
+--- a/arch/arm/mach-s3c2440/Makefile
++++ b/arch/arm/mach-s3c2440/Makefile
+@@ -21,3 +21,6 @@ obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
+ obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
+ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
+ obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
++obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
++obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
++
+diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
+new file mode 100644
+index 0000000..f72a5ae
+--- /dev/null
++++ b/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -0,0 +1,826 @@
++/*
++ * linux/arch/arm/mach-s3c2440/mach-gta02.c
++ *
++ * S3C2440 Machine Support for the FIC GTA02 (Neo1973)
++ *
++ * Copyright (C) 2006-2007 by OpenMoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/serial_core.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/glamo.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mmc/host.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++
++#include <linux/pcf50633.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++
++#include <asm/arch/regs-gpio.h>
++#include <asm/arch/regs-gpioj.h>
++#include <asm/arch/fb.h>
++#include <asm/arch/mci.h>
++#include <asm/arch/ts.h>
++#include <asm/arch/spi.h>
++#include <asm/arch/spi-gpio.h>
++#include <asm/arch/usb-control.h>
++
++#include <asm/arch/gta01.h>
++#include <asm/arch/gta02.h>
++
++#include <asm/plat-s3c/regs-serial.h>
++#include <asm/plat-s3c/nand.h>
++#include <asm/plat-s3c24xx/devs.h>
++#include <asm/plat-s3c24xx/cpu.h>
++#include <asm/plat-s3c24xx/pm.h>
++#include <asm/plat-s3c24xx/udc.h>
++
++#include <linux/glamofb.h>
++
++static struct map_desc gta02_iodesc[] __initdata = {
++	{
++		.virtual	= 0xe0000000,
++		.pfn		= __phys_to_pfn(S3C2410_CS3+0x01000000),
++		.length		= SZ_1M,
++		.type		= MT_DEVICE
++	},
++};
++
++#define UCON S3C2410_UCON_DEFAULT
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg gta02_uartcfgs[] = {
++	[0] = {
++		.hwport	     = 0,
++		.flags	     = 0,
++		.ucon	     = UCON,
++		.ulcon	     = ULCON,
++		.ufcon	     = UFCON,
++	},
++	[1] = {
++		.hwport	     = 1,
++		.flags	     = 0,
++		.ucon	     = UCON,
++		.ulcon	     = ULCON,
++		.ufcon	     = UFCON,
++	},
++	[2] = {
++		.hwport	     = 2,
++		.flags	     = 0,
++		.ucon	     = UCON,
++		.ulcon	     = ULCON,
++		.ufcon	     = UFCON,
++	},
++
++};
++
++/* PMU driver info */
++
++static int pmu_callback(struct device *dev, unsigned int feature,
++			enum pmu_event event)
++{
++	switch (feature) {
++	case PCF50633_FEAT_MBC:
++		switch (event) {
++		case PMU_EVT_INSERT:
++		case PMU_EVT_USB_INSERT:
++			pcf50633_charge_enable(pcf50633_global, 1);
++			break;
++		case PMU_EVT_REMOVE:
++		case PMU_EVT_USB_REMOVE:
++			pcf50633_charge_enable(pcf50633_global, 0);
++			break;
++		default:
++			break;
++		}
++		break;
++	default:
++		break;
++	}
++
++	return 0;
++}
++
++static struct pcf50633_platform_data gta02_pcf_pdata = {
++	.used_features	= PCF50633_FEAT_MBC |
++			  PCF50633_FEAT_BBC |
++			  PCF50633_FEAT_RTC |
++			  PCF50633_FEAT_CHGCUR |
++			  PCF50633_FEAT_BATVOLT |
++			  PCF50633_FEAT_BATTEMP |
++			  PCF50633_FEAT_PWM_BL,
++	.onkey_seconds_sig_init = 4,
++	.onkey_seconds_shutdown = 8,
++	.cb		= &pmu_callback,
++	.r_fix_batt	= 10000,
++	.r_fix_batt_par	= 10000,
++	.r_sense_milli	= 220,
++	.rails	= {
++		[PCF50633_REGULATOR_AUTO] = {
++			.name		= "io_3v3",
++			.flags		= PMU_VRAIL_F_SUSPEND_ON,
++			.voltage	= {
++				.init	= 3300,
++				.max	= 3300,
++			},
++		},
++		[PCF50633_REGULATOR_DOWN1] = {
++			.name		= "core_1v3",
++			.voltage	= {
++				.init	= 1300,
++				.max	= 1600,
++			},
++		},
++		[PCF50633_REGULATOR_DOWN2] = {
++			.name		= "core_1v8",
++			.voltage	= {
++				.init	= 1800,
++				.max	= 1800,
++			},
++		},
++		[PCF50633_REGULATOR_HCLDO] = {
++			.name		= "sd_3v3",
++			.voltage	= {
++				.init	= 3300,
++				.max	= 3300,
++			},
++		},
++		[PCF50633_REGULATOR_LDO1] = {
++			.name		= "stby_1v3",
++			.flags		= PMU_VRAIL_F_SUSPEND_ON,
++			.voltage	= {
++				.init	= 1300,
++				.max	= 1330,
++			},
++		},
++		[PCF50633_REGULATOR_LDO2] = {
++			.name		= "codec_3v3",
++			.voltage	= {
++				.init	= 3300,
++				.max	= 3300,
++			},
++		},
++		[PCF50633_REGULATOR_LDO3] = {
++			.name		= "lcm_3v",
++			.voltage	= {
++				.init	= 3000,
++				.max	= 3000,
++			},
++		},
++		[PCF50633_REGULATOR_LDO4] = {
++			.name		= "gl_2v5",
++			.voltage	= {
++				.init	= 2500,
++				.max	= 2500,
++			},
++		},
++		[PCF50633_REGULATOR_LDO5] = {
++			.name		= "gl_1v5",
++			.voltage	= {
++				.init	= 1500,
++				.max	= 1500,
++			},
++		},
++		[PCF50633_REGULATOR_LDO6] = {
++			.name		= "user1",
++			.voltage	= {
++				.init	= 0,
++				.max	= 3300,
++			},
++		},
++	},
++};
++
++#if 0 /* currently unused */
++static void cfg_pmu_vrail(struct pmu_voltage_rail *vrail, char *name,
++			  unsigned int flags, unsigned int init,
++			  unsigned int max)
++{
++	vrail->name = name;
++	vrail->flags = flags;
++	vrail->voltage.init = init;
++	vrail->voltage.max = max;
++}
++#endif
++
++static void mangle_pmu_pdata_by_system_rev(void)
++{
++	switch (system_rev) {
++	case GTA02v1_SYSTEM_REV:
++		/* FIXME: this is only in v1 due to wrong PMU variant */
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_DOWN2].flags =
++							PMU_VRAIL_F_SUSPEND_ON;
++		break;
++	case GTA02v2_SYSTEM_REV:
++	case GTA02v3_SYSTEM_REV:
++	case GTA02v4_SYSTEM_REV:
++	case GTA02v5_SYSTEM_REV:
++	case GTA02v6_SYSTEM_REV:
++		/* we need to keep the 1.8V going since this is the SDRAM
++		 * self-refresh voltage */
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_DOWN2].flags =
++							PMU_VRAIL_F_SUSPEND_ON;
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_DOWN2].name =
++							"io_1v8",
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].name =
++							"gsensor_3v3",
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].voltage.init =
++							3300;
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].voltage.max =
++							3300;
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO1].flags &=
++							~PMU_VRAIL_F_SUSPEND_ON;
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO3].flags =
++							PMU_VRAIL_F_UNUSED;
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO5] = ((struct pmu_voltage_rail) {
++							.name = "rf_3v",
++							.voltage = {
++								.init = 0,
++								.max = 3000,
++							}
++						});
++		gta02_pcf_pdata.rails[PCF50633_REGULATOR_LDO6] = ((struct pmu_voltage_rail) {
++							.name = "lcm_3v",
++							.voltage = {
++								.init = 3000,
++								.max = 3000,
++							}
++						});
++		break;
++	default:
++		break;
++	}
++}
++
++static struct resource gta02_pmu_resources[] = {
++	[0] = {
++		.flags	= IORESOURCE_IRQ,
++		.start	= GTA02_IRQ_PCF50633,
++		.end	= GTA02_IRQ_PCF50633,
++	},
++};
++
++struct platform_device gta02_pmu_dev = {
++	.name 		= "pcf50633",
++	.num_resources	= ARRAY_SIZE(gta02_pmu_resources),
++	.resource	= gta02_pmu_resources,
++	.dev		= {
++		.platform_data = &gta02_pcf_pdata,
++	},
++};
++
++
++/* NOR Flash */
++
++#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
++#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
++
++static struct physmap_flash_data gta02_nor_flash_data = {
++	.width		= 2,
++};
++
++static struct resource gta02_nor_flash_resource = {
++	.start		= GTA02_FLASH_BASE,
++	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device gta02_nor_flash = {
++	.name		= "physmap-flash",
++	.id		= 0,
++	.dev		= {
++				.platform_data	= &gta02_nor_flash_data,
++			},
++	.resource	= &gta02_nor_flash_resource,
++	.num_resources	= 1,
++};
++
++
++
++static struct resource gta02_sdio_resources[] = {
++	[0] = {
++		.flags	= IORESOURCE_IRQ,
++		.start	= IRQ_SDI,
++		.end	= IRQ_SDI,
++	},
++	[1] = {
++		.flags = IORESOURCE_MEM,
++		.start = S3C2410_PA_SDI,
++		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
++	},
++	[2] = {
++		.flags = IORESOURCE_DMA,
++		.start = 0, /* Channel 0 for SDI */
++		.end = 0,
++	},
++};
++
++
++static struct platform_device gta02_sdio_dev = {
++        .name           = "s3c24xx-sdio",
++        .id             = -1,
++        .dev            = {
++                                .coherent_dma_mask      = 0xffffffff,
++        },
++        .resource       = gta02_sdio_resources,
++        .num_resources  = ARRAY_SIZE(gta02_sdio_resources),
++};
++
++static struct platform_device *gta02_devices[] __initdata = {
++	&s3c_device_usb,
++	&s3c_device_wdt,
++	&s3c_device_i2c,
++	&s3c_device_iis,
++	// &s3c_device_sdi, /* FIXME: temporary disable to avoid s3cmci bind */
++	&s3c_device_usbgadget,
++	&s3c_device_nand,
++	&s3c_device_ts,
++	&s3c_device_spi0,
++	&s3c_device_spi1,
++	&gta02_nor_flash,
++};
++
++static struct s3c2410_nand_set gta02_nand_sets[] = {
++	[0] = {
++		.name		= "neo1973-nand",
++		.nr_chips	= 1,
++		.flags		= S3C2410_NAND_BBT,
++	},
++};
++
++/* choose a set of timings which should suit most 512Mbit
++ * chips and beyond.
++ */
++
++static struct s3c2410_platform_nand gta02_nand_info = {
++	.tacls		= 20,
++	.twrph0		= 60,
++	.twrph1		= 20,
++	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
++	.sets		= gta02_nand_sets,
++};
++
++static struct s3c24xx_mci_pdata gta02_mmc_cfg = {
++	.gpio_detect	= GTA02v1_GPIO_nSD_DETECT,
++	.set_power	= NULL,
++	.ocr_avail	= MMC_VDD_32_33,
++};
++
++static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
++{
++	printk(KERN_DEBUG "%s(%d)\n", __func__, cmd);
++
++	switch (cmd) {
++	case S3C2410_UDC_P_ENABLE:
++		s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 1);
++		break;
++	case S3C2410_UDC_P_DISABLE:
++		s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 0);
++		break;
++	case S3C2410_UDC_P_RESET:
++		/* FIXME! */
++		break;
++	default:
++		break;
++	}
++}
++
++/* use a work queue, since I2C API inherently schedules
++ * and we get called in hardirq context from UDC driver */
++
++struct vbus_draw {
++	struct work_struct work;
++	int ma;
++};
++static struct vbus_draw gta02_udc_vbus_drawer;
++
++static void __gta02_udc_vbus_draw(struct work_struct *work)
++{
++	if (!pcf50633_global) {
++		printk(KERN_ERR  "pcf50633 not initialized yet, can't change "
++		       "vbus_draw\n");
++		return;
++	}
++	pcf50633_usb_curlim_set(pcf50633_global, gta02_udc_vbus_drawer.ma);
++}
++
++static void gta02_udc_vbus_draw(unsigned int ma)
++{
++	gta02_udc_vbus_drawer.ma = ma;
++	schedule_work(&gta02_udc_vbus_drawer.work);
++}
++
++static struct s3c2410_udc_mach_info gta02_udc_cfg = {
++	.vbus_draw	= gta02_udc_vbus_draw,
++	.udc_command	= gta02_udc_command,
++
++};
++
++static struct s3c2410_ts_mach_info gta02_ts_cfg = {
++	.delay = 10000,
++	.presc = 65,
++	.oversampling_shift = 5,
++};
++
++/* SPI */
++
++static struct spi_board_info gta02_spi_board_info[] = {
++	{
++		.modalias	= "jbt6k74",
++		/* platform_data */
++		/* controller_data */
++		/* irq */
++		.max_speed_hz	= 10 * 1000 * 1000,
++		.bus_num	= 2,
++		/* chip_select */
++	},
++};
++
++static struct glamo_spi_info glamo_spi_cfg = {
++	.board_size	= ARRAY_SIZE(gta02_spi_board_info),
++	.board_info	= gta02_spi_board_info,
++};
++
++static struct glamo_spigpio_info glamo_spigpio_cfg = {
++	.pin_clk	= GLAMO_GPIO10_OUTPUT,
++	.pin_mosi	= GLAMO_GPIO11_OUTPUT,
++	.pin_cs		= GLAMO_GPIO12_OUTPUT,
++	.pin_miso	= 0,
++	.board_size	= ARRAY_SIZE(gta02_spi_board_info),
++	.board_info	= gta02_spi_board_info,
++};
++
++static struct resource gta01_led_resources[] = {
++	[0] = {
++		.start	= GTA02_GPIO_VIBRATOR_ON,
++		.end	= GTA02_GPIO_VIBRATOR_ON,
++	},
++};
++
++static struct platform_device gta01_led_dev = {
++	.name		= "neo1973-vibrator",
++	.num_resources	= ARRAY_SIZE(gta01_led_resources),
++	.resource	= gta01_led_resources,
++};
++
++static struct resource gta02_led_resources[] = {
++	{
++		.name	= "gta02-power:orange",
++		.start	= GTA02_GPIO_PWR_LED1,
++		.end	= GTA02_GPIO_PWR_LED1,
++	}, {
++		.name	= "gta02-power:blue",
++		.start	= GTA02_GPIO_PWR_LED2,
++		.end	= GTA02_GPIO_PWR_LED2,
++	}, {
++		.name	= "gta02-aux:red",
++		.start	= GTA02_GPIO_AUX_LED,
++		.end	= GTA02_GPIO_AUX_LED,
++	},
++};
++
++struct platform_device gta02_led_dev = {
++	.name		= "gta02-led",
++	.num_resources	= ARRAY_SIZE(gta02_led_resources),
++	.resource	= gta02_led_resources,
++};
++
++static struct resource gta01_button_resources[] = {
++	[0] = {
++		.start = GTA02_GPIO_AUX_KEY,
++		.end   = GTA02_GPIO_AUX_KEY,
++	},
++	[1] = {
++		.start = GTA02_GPIO_HOLD_KEY,
++		.end   = GTA02_GPIO_HOLD_KEY,
++	},
++	[2] = {
++		.start = GTA02_GPIO_JACK_INSERT,
++		.end   = GTA02_GPIO_JACK_INSERT,
++	},
++};
++
++static struct platform_device gta01_button_dev = {
++	.name		= "neo1973-button",
++	.num_resources	= ARRAY_SIZE(gta01_button_resources),
++	.resource	= gta01_button_resources,
++};
++
++static struct platform_device gta01_pm_gsm_dev = {
++	.name		= "neo1973-pm-gsm",
++};
++
++/* USB */
++static struct s3c2410_hcd_info gta02_usb_info = {
++	.port[0]	= {
++		.flags	= S3C_HCDFLG_USED,
++	},
++	.port[1]	= {
++		.flags	= 0,
++	},
++};
++
++static int glamo_irq_is_wired(void)
++{
++	int rc;
++	int count = 0;
++
++	/*
++	* GTA02 S-Media IRQs prior to A5 are broken due to a lack of
++	* a pullup on the INT# line.  Check for the bad behaviour.
++	*/
++	s3c2410_gpio_setpin(S3C2410_GPG4, 0);
++	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);
++	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP);
++	/*
++	* we force it low ourselves for a moment and resume being input.
++	* If there is a pullup, it won't stay low for long.  But if the
++	* level converter is there as on < A5 revision, the weak keeper
++	* on the input of the LC will hold the line low indefinitiely
++	*/
++	do
++		rc = s3c2410_gpio_getpin(S3C2410_GPG4);
++	while ((!rc) && ((count++) < 10));
++	if (rc) { /* it got pulled back up, it's good */
++		printk(KERN_INFO "Detected S-Media IRQ# pullup, "
++		"enabling interrupt\n");
++		return 0;
++	} else  /* Gah we can't work with this level converter */
++		printk(KERN_WARNING "** Detected bad IRQ# circuit found"
++		" on pre-A5 GTA02: S-Media interrupt disabled **\n");
++	return -ENODEV;
++}
++
++
++static void
++gta02_glamo_mmc_set_power(unsigned char power_mode, unsigned short vdd)
++{
++	int mv = 1650;
++
++	printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u\n",
++	       power_mode, vdd);
++
++	switch (system_rev) {
++	case GTA02v1_SYSTEM_REV:
++	case GTA02v2_SYSTEM_REV:
++		break;
++	case GTA02v3_SYSTEM_REV:
++	case GTA02v4_SYSTEM_REV:
++	case GTA02v5_SYSTEM_REV:
++	case GTA02v6_SYSTEM_REV:
++		/* depend on pcf50633 driver init */
++		if (!pcf50633_global)
++			while (!pcf50633_global)
++				msleep(10);
++		switch (power_mode) {
++		case MMC_POWER_ON:
++		case MMC_POWER_UP:
++			/* select and set the voltage */
++			if (vdd > 7) {
++				mv += 300 + 100 * (vdd - 8);
++				if (mv > 3500)
++					mv = 3500;
++			}
++			pcf50633_voltage_set(pcf50633_global,
++					     PCF50633_REGULATOR_HCLDO, mv);
++			msleep(10);
++			pcf50633_onoff_set(pcf50633_global,
++					   PCF50633_REGULATOR_HCLDO, 1);
++			msleep(1);
++			break;
++		case MMC_POWER_OFF:
++			pcf50633_onoff_set(pcf50633_global,
++					   PCF50633_REGULATOR_HCLDO, 0);
++			msleep(1);
++			break;
++		}
++		break;
++	}
++}
++
++/* Smedia Glamo 3362 */
++
++static struct glamofb_platform_data gta02_glamo_pdata = {
++	.width		= 43,
++	.height		= 58,
++	 /* 24.5MHz --> 40.816ns */
++	.pixclock	= 40816,
++	.left_margin	= 8,
++	.right_margin	= 16,
++	.upper_margin	= 2,
++	.lower_margin	= 16,
++	.hsync_len	= 8,
++	.vsync_len	= 2,
++	.fb_mem_size	= 0x400000, /* glamo has 8 megs of SRAM. we use 4 */
++	.xres		= {
++		.min	= 240,
++		.max	= 640,
++		.defval	= 480,
++	},
++	.yres		= {
++		.min	= 320,
++		.max	= 640,
++		.defval	= 640,
++	},
++	.bpp		= {
++		.min	= 16,
++		.max	= 16,
++		.defval	= 16,
++	},
++	//.spi_info	= &glamo_spi_cfg,
++	.spigpio_info	= &glamo_spigpio_cfg,
++
++	/* glamo MMC function platform data */
++	.glamo_set_mci_power = gta02_glamo_mmc_set_power,
++	.glamo_irq_is_wired = glamo_irq_is_wired,
++};
++
++static struct resource gta02_glamo_resources[] = {
++	[0] = {
++		.start	= S3C2410_CS1,
++		.end	= S3C2410_CS1 + 0x1000000 - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= GTA02_IRQ_3D,
++		.end	= GTA02_IRQ_3D,
++		.flags	= IORESOURCE_IRQ,
++	},
++	[2] = {
++		.start = GTA02v1_GPIO_3D_RESET,
++		.end   = GTA02v1_GPIO_3D_RESET,
++	},
++};
++
++static struct platform_device gta02_glamo_dev = {
++	.name		= "glamo3362",
++	.num_resources	= ARRAY_SIZE(gta02_glamo_resources),
++	.resource	= gta02_glamo_resources,
++	.dev		= {
++		.platform_data	= &gta02_glamo_pdata,
++	},
++};
++
++static void mangle_glamo_res_by_system_rev(void)
++{
++	switch (system_rev) {
++	case GTA02v1_SYSTEM_REV:
++		break;
++	default:
++		gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET;
++		gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET;
++		break;
++	}
++
++	switch (system_rev) {
++	case GTA02v1_SYSTEM_REV:
++	case GTA02v2_SYSTEM_REV:
++	case GTA02v3_SYSTEM_REV:
++	/* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */
++		/* The hardware is missing a pull-up resistor and thus can't
++		 * support the Smedia Glamo IRQ */
++		gta02_glamo_resources[1].start = 0;
++		gta02_glamo_resources[1].end = 0;
++		break;
++	}
++}
++
++static void __init gta02_map_io(void)
++{
++	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
++	s3c24xx_init_clocks(12000000);
++	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
++}
++
++static irqreturn_t gta02_modem_irq(int irq, void *param)
++{
++	printk(KERN_DEBUG "modem wakeup interrupt\n");
++	return IRQ_HANDLED;
++}
++
++static void __init gta02_machine_init(void)
++{
++	int rc;
++
++	s3c_device_usb.dev.platform_data = &gta02_usb_info;
++	s3c_device_nand.dev.platform_data = &gta02_nand_info;
++	s3c_device_sdi.dev.platform_data = &gta02_mmc_cfg;
++
++	/* Only GTA02v1 has a SD_DETECT GPIO.  Since the slot is not
++	 * hot-pluggable, this is not required anyway */
++	switch (system_rev) {
++	case GTA02v1_SYSTEM_REV:
++		break;
++	default:
++		gta02_mmc_cfg.gpio_detect = 0;
++		break;
++	}
++
++	INIT_WORK(&gta02_udc_vbus_drawer.work, __gta02_udc_vbus_draw);
++	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
++	set_s3c2410ts_info(&gta02_ts_cfg);
++
++	/* FIXME: hardcoded WLAN module power-up */
++	s3c2410_gpio_cfgpin(GTA02_CHIP_PWD, S3C2410_GPIO_OUTPUT);
++
++	/* Power is down */
++	s3c2410_gpio_setpin(GTA02_CHIP_PWD, 1);
++	mdelay(100);
++
++	switch (system_rev) {
++	case GTA02v1_SYSTEM_REV:
++		s3c2410_gpio_setpin(GTA02_CHIP_PWD, 0);
++		break;
++	default:
++		s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
++		/* Chip is in reset state */
++		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
++		mdelay(100);
++		/* Power is up */
++		s3c2410_gpio_setpin(GTA02_CHIP_PWD, 0);
++		mdelay(100);
++		/* Chip is out of reset */
++		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
++		break;
++	}
++
++	platform_device_register(&gta01_button_dev);
++	platform_device_register(&gta01_pm_gsm_dev);
++
++	mangle_pmu_pdata_by_system_rev();
++	platform_device_register(&gta02_pmu_dev);
++	platform_device_register(&gta01_led_dev);
++	platform_device_register(&gta02_led_dev);
++
++	mangle_glamo_res_by_system_rev();
++	platform_device_register(&gta02_glamo_dev);
++
++	platform_device_register(&gta02_sdio_dev);
++
++	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
++
++	s3c2410_pm_init();
++
++	/* Set LCD_RESET / XRES to high */
++	s3c2410_gpio_cfgpin(GTA01_GPIO_LCD_RESET, S3C2410_GPIO_OUTPUT);
++	s3c2410_gpio_setpin(GTA01_GPIO_LCD_RESET, 1);
++
++	/* Make sure the modem can wake us up */
++	set_irq_type(GTA02_IRQ_MODEM, IRQT_RISING);
++	rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
++			 "modem", NULL);
++	if (rc < 0)
++		printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
++	enable_irq_wake(GTA02_IRQ_MODEM);
++}
++
++MACHINE_START(NEO1973_GTA02, "GTA02")
++	.phys_io	= S3C2410_PA_UART,
++	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
++	.boot_params	= S3C2410_SDRAM_PA + 0x100,
++	.map_io		= gta02_map_io,
++	.init_irq	= s3c24xx_init_irq,
++	.init_machine	= gta02_machine_init,
++	.timer		= &s3c24xx_timer,
++MACHINE_END
+diff --git a/drivers/leds/leds-neo1973-vibrator.c b/drivers/leds/leds-neo1973-vibrator.c
+index 0336e36..c943a6a 100644
+--- a/drivers/leds/leds-neo1973-vibrator.c
++++ b/drivers/leds/leds-neo1973-vibrator.c
+@@ -113,7 +113,7 @@ static int __init neo1973_vib_probe(struct platform_device *pdev)
+ 	struct resource *r;
+ 	int rc;
+ 
+-	if (!machine_is_neo1973_gta01())
++	if (!machine_is_neo1973_gta01() && !machine_is_neo1973_gta02())
+ 		return -EIO;
+ 
+ 	r = platform_get_resource(pdev, 0, 0);
+diff --git a/include/asm-arm/arch-s3c2410/gta02.h b/include/asm-arm/arch-s3c2410/gta02.h
+new file mode 100644
+index 0000000..fa49d93
+--- /dev/null
++++ b/include/asm-arm/arch-s3c2410/gta02.h
+@@ -0,0 +1,99 @@
++#ifndef _GTA02_H
++#define _GTA02_H
++
++#include <asm/arch/regs-gpio.h>
++#include <asm/arch/irqs.h>
++
++/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
++#define GTA02v1_SYSTEM_REV	0x00000310
++#define GTA02v2_SYSTEM_REV	0x00000320
++#define GTA02v3_SYSTEM_REV	0x00000330
++#define GTA02v4_SYSTEM_REV	0x00000340
++#define GTA02v5_SYSTEM_REV	0x00000350
++#define GTA02v6_SYSTEM_REV	0x00000360
++
++#define GTA02_GPIO_n3DL_GSM	S3C2410_GPA13	/* v1 + v2 + v3 only */
++
++#define GTA02_GPIO_PWR_LED1	S3C2410_GPB0
++#define GTA02_GPIO_PWR_LED2	S3C2410_GPB1
++#define GTA02_GPIO_AUX_LED	S3C2410_GPB2
++#define GTA02_GPIO_VIBRATOR_ON	S3C2410_GPB3
++#define GTA02v1_GPIO_GPS_PWRON	S3C2410_GPB4	/* v1 only */
++#define GTA02_GPIO_MODEM_RST	S3C2410_GPB5
++#define GTA02_GPIO_BT_EN	S3C2410_GPB6
++#define GTA02_GPIO_MODEM_ON	S3C2410_GPB7
++#define GTA02v1_GPIO_EN_AGPS3V	S3C2410_GPB8	/* v1 only */
++#define GTA02_GPIO_EXTINT8	S3C2410_GPB8
++#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB9
++
++#define GTA02v1_GPIO_nGPS_RST	S3C2410_GPC0	/* v1 only */
++#define GTA02v12_GPIO_PIO3	S3C2410_GPC5	/* v1 + v2 only */
++#define GTA02_GPIO_PIO5		S3C2410_GPC5	/* v3 + v4 only */
++#define GTA02_GPIO_LCD_RESET	S3C2410_GPC6	/* v1 + v2 only */
++#define GTA02v12_GPIO_PIO2	S3C2410_GPC7	/* v1 + v2 only */
++#define GTA02v2_nUSB_FLT	S3C2410_GPC9	/* v2 only */
++#define GTA02v2_nUSB_OC		S3C2410_GPC10	/* v2 only */
++#define GTA02v2_nGSM_OC		S3C2410_GPC12	/* v2 only */
++
++#define GTA02v3_GPIO_nG1_CS	S3C2410_GPD12	/* v3 + v4 only */
++#define GTA02v3_GPIO_nG2_CS	S3C2410_GPD13	/* v3 + v4 only */
++
++#define GTA02_GPIO_nG1_INT	S3C2410_GPF0
++#define GTA02_GPIO_IO1		S3C2410_GPF1
++#define GTA02v1_GPIO_nG2_INT	S3C2410_GPF2	/* v1 only */
++#define GTA02_GPIO_PIO_2	S3C2410_GPF2	/* v2 + v3 + v4 only */
++#define GTA02_GPIO_JACK_INSERT	S3C2410_GPF4
++#define GTA02v1_GPIO_nSD_DETECT	S3C2410_GPF5	/* v1 only */
++#define GTA02_GPIO_WLAN_GPIO1	S3C2410_GPF5	/* v2 + v3 + v4 only */
++#define GTA02_GPIO_AUX_KEY	S3C2410_GPF6
++#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF7
++
++#define GTA02_GPIO_3D_IRQ	S3C2410_GPG4
++#define GTA02v1_GPIO_nG1_CS	S3C2410_GPG8	/* v1 only */
++#define GTA02v2_GPIO_nG2_INT	S3C2410_GPG8	/* v2 + v3 + v4 only */
++#define GTA02v3_GPIO_nUSB_OC	S3C2410_GPG9	/* v3 + v4 only */
++#define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG10	/* v3 + v4 only */
++#define GTA02v1_GPIO_nG2_CS	S3C2410_GPG11	/* v1 only */
++#define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG11	/* v3 + v4 only */
++
++#define GTA02v1_GPIO_3D_RESET	S3C2440_GPJ0	/* v1 only */
++#define GTA02v2_GPIO_BAT_ID	S3C2440_GPJ0	/* v2 only */
++#define GTA02v1_GPIO_WLAN_GPIO8	S3C2440_GPJ1	/* v1 only */
++#define GTA02_GPIO_AMP_SHUT	S3C2440_GPJ1	/* v2 + v3 + v4 only */
++#define GTA02v1_GPIO_WLAN_GPIO10	S3C2440_GPJ2
++#define GTA02_GPIO_HP_IN	S3C2440_GPJ2	/* v2 + v3 + v4 only */
++#define GTA02v1_GPIO_KEEPACT	S3C2440_GPJ3	/* v1 only */
++#define GTA02_GPIO_INT0		S3C2440_GPJ3	/* v2 + v3 + v4 only */
++#define GTA02_GPIO_nGSM_EN	S3C2440_GPJ4
++#define GTA02_GPIO_3D_RESET	S3C2440_GPJ5
++#define GTA02_GPIO_nDL_GSM	S3C2440_GPJ6	/* v4 + v5 only */
++#define GTA02_GPIO_WLAN_GPIO0	S3C2440_GPJ7
++#define GTA02v1_GPIO_BAT_ID	S3C2440_GPJ8
++#define GTA02_GPIO_KEEPACT	S3C2440_GPJ8
++#define GTA02v1_GPIO_AMP_SHUT	S3C2440_GPJ9	/* v1 only */
++#define GTA02v2_nG1_CS		S3C2440_GPJ9	/* v2 only */
++#define GTA02v1_GPIO_HP_IN	S3C2440_GPJ10
++#define GTA02v2_nG2_CS		S3C2440_GPJ10	/* v2 only */
++#define GTA02v1_GPIO_INT0	S3C2440_GPJ11	/* v1 only */
++#define GTA02_CHIP_PWD		S3C2440_GPJ11	/* v2 + v3 + v4 only */
++#define GTA02v1_GPIO_nGSM_EN	S3C2440_GPJ12	/* v1 only */
++#define GTA02_GPIO_nWLAN_RESET	S3C2440_GPJ12	/* v2 + v3 + v4 only */
++
++#define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
++#define GTA02_IRQ_MODEM		IRQ_EINT1
++#define GTA02v1_IRQ_GSENSOR_2	IRQ_EINT2	/* v1 only */
++#define GTA02_IRQ_PIO_2		IRQ_EINT2	/* v2 + v3 + v4 only */
++#define GTA02_IRQ_nJACK_INSERT	IRQ_EINT4
++#define GTA02v1_IRQ_nSD_CD	IRQ_EINT5	/* v1 only */
++#define GTA02_IRQ_WLAN_GPIO1	IRQ_EINT5
++#define GTA02_IRQ_AUX		IRQ_EINT6
++#define GTA02_IRQ_nHOLD		IRQ_EINT7
++#define GTA02v1_IRQ_nSIM_CD	IRQ_EINT8	/* v1 only */
++#define GTA02_IRQ_PCF50633	IRQ_EINT9
++#define GTA02_IRQ_3D		IRQ_EINT12
++#define GTA02_IRQ_GSENSOR_2	IRQ_EINT16	/* v2 + v3 + v4 only */
++#define GTA02v3_IRQ_nUSB_OC	IRQ_EINT17	/* v3 + v4 only */
++#define GTA02v3_IRQ_nUSB_FLT	IRQ_EINT18	/* v3 + v4 only */
++#define GTA02v3_IRQ_nGSM_OC	IRQ_EINT19	/* v3 + v4 only */
++
++#endif /* _GTA02_H */
+diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
+index 0e9d1c5..4ab6f63 100644
+--- a/sound/soc/s3c24xx/neo1973_wm8753.c
++++ b/sound/soc/s3c24xx/neo1973_wm8753.c
+@@ -671,6 +671,14 @@ static int __init neo1973_init(void)
+ {
+ 	int ret;
+ 
++	DBG("Entered %s\n", __func__);
++
++	if (!machine_is_neo1973_gta01()) {
++		printk(KERN_INFO
++		       "Only GTA01 hardware supported by ASoc driver\n");
++		return -ENODEV;
++	}
++
+ 	neo1973_snd_device = platform_device_alloc("soc-audio", -1);
+ 	if (!neo1973_snd_device)
+ 		return -ENOMEM;
+-- 
+1.5.6.3
+