nuke obsolete kernel stuff

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14875 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 264 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.24/1214-introduce-resume-exception-capture.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1214-introduce-resume-exception-capture.patch.patch
deleted file mode 100644
index e5900e0233..0000000000
--- a/target/linux/s3c24xx/patches-2.6.24/1214-introduce-resume-exception-capture.patch.patch
+++ /dev/null
@@ -1,264 +0,0 @@
-From 8e18a9db5f895f654b06000d7bd10528e6b795f3 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Wed, 2 Jul 2008 22:44:11 +0100
-Subject: [PATCH] introduce-resume-exception-capture.patch
-
-This patch introduces a new resume debugging concept: if we
-get an OOPS inbetween starting suspend and finishing resume, it
-uses a new "emergency spew" device similar to BUT NOT REQUIRING
-CONFIG_DEBUG_LL to dump the syslog buffer and then the OOPS
-on the debug device defined by the existing CONFIG_DEBUG_S3C_UART
-index.  But neither CONFIG_DEBUG_LL nor the S3C low level configs
-are needed to use this feature.
-
-Another difference between this feature and CONFIG_DEBUG_LL is that
-it does not affect resume timing, ordering or UART traffic UNLESS
-there is an OOPS during resume.
-
-The patch adds three global exports, one to say if we are inside
-suspend / resume, and two callbacks for printk() to use to init
-and dump the emergency data.  The callbacks are set in s3c serial
-device init, but the whole structure is arch independent.
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- drivers/serial/s3c2410.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
- include/linux/kernel.h   |    2 +
- include/linux/suspend.h  |    6 ++++
- kernel/power/main.c      |   10 ++++++-
- kernel/printk.c          |   41 +++++++++++++++++++++++++++
- 5 files changed, 127 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
-index 73c6284..fef3c8f 100644
---- a/drivers/serial/s3c2410.c
-+++ b/drivers/serial/s3c2410.c
-@@ -81,6 +81,7 @@
- 
- #include <asm/plat-s3c/regs-serial.h>
- #include <asm/arch/regs-gpio.h>
-+#include <asm/arch/regs-clock.h>
- 
- /* structures */
- 
-@@ -992,6 +993,69 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
- #endif
- };
- 
-+static void s3c24xx_serial_force_debug_port_up(void)
-+{
-+	struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
-+							 CONFIG_DEBUG_S3C_UART];
-+	struct s3c24xx_uart_clksrc *clksrc = NULL;
-+	struct clk *clk = NULL;
-+	unsigned long tmp;
-+
-+	s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200);
-+
-+	tmp = __raw_readl(S3C2410_CLKCON);
-+
-+	/* re-start uart clocks */
-+	tmp |= S3C2410_CLKCON_UART0;
-+	tmp |= S3C2410_CLKCON_UART1;
-+	tmp |= S3C2410_CLKCON_UART2;
-+
-+	__raw_writel(tmp, S3C2410_CLKCON);
-+	udelay(10);
-+
-+	s3c24xx_serial_setsource(&ourport->port, clksrc);
-+
-+	if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
-+		clk_disable(ourport->baudclk);
-+		ourport->baudclk  = NULL;
-+	}
-+
-+	clk_enable(clk);
-+
-+	ourport->clksrc = clksrc;
-+	ourport->baudclk = clk;
-+}
-+
-+static void s3c2410_printascii(const char *sz)
-+{
-+	struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
-+							 CONFIG_DEBUG_S3C_UART];
-+	struct uart_port *port = &ourport->port;
-+
-+	/* 8 N 1 */
-+	wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3);
-+	/* polling mode */
-+	wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5);
-+	/* disable FIFO */
-+	wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01));
-+	/* fix baud rate */
-+	wr_regl(port, S3C2410_UBRDIV, 26);
-+
-+	while (*sz) {
-+		int timeout = 10000000;
-+
-+		/* spin on it being busy */
-+		while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--)
-+			;
-+
-+		/* transmit register */
-+		wr_regl(port, S3C2410_UTXH, *sz);
-+
-+		sz++;
-+	}
-+}
-+
-+
- /* s3c24xx_serial_resetport
-  *
-  * wrapper to call the specific reset for this port (reset the fifos
-@@ -1167,6 +1231,11 @@ static int s3c24xx_serial_resume(struct platform_device *dev)
- static int s3c24xx_serial_init(struct platform_driver *drv,
- 			       struct s3c24xx_uart_info *info)
- {
-+	/* set up the emergency debug UART functions */
-+
-+	printk_emergency_debug_spew_init = s3c24xx_serial_force_debug_port_up;
-+	printk_emergency_debug_spew_send_string = s3c2410_printascii;
-+
- 	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
- 	return platform_driver_register(drv);
- }
-diff --git a/include/linux/kernel.h b/include/linux/kernel.h
-index 94bc996..8e565b4 100644
---- a/include/linux/kernel.h
-+++ b/include/linux/kernel.h
-@@ -182,6 +182,8 @@ asmlinkage int printk(const char * fmt, ...)
- extern int log_buf_get_len(void);
- extern int log_buf_read(int idx);
- extern int log_buf_copy(char *dest, int idx, int len);
-+extern void (*printk_emergency_debug_spew_init)(void);
-+extern void (*printk_emergency_debug_spew_send_string)(const char *);
- #else
- static inline int vprintk(const char *s, va_list args)
- 	__attribute__ ((format (printf, 1, 0)));
-diff --git a/include/linux/suspend.h b/include/linux/suspend.h
-index 4360e08..7186eef 100644
---- a/include/linux/suspend.h
-+++ b/include/linux/suspend.h
-@@ -122,6 +122,12 @@ struct pbe {
- 	struct pbe *next;
- };
- 
-+/**
-+ * global indication we are somewhere between start of suspend and end of
-+ * resume, nonzero is true
-+ */
-+extern int global_inside_suspend;
-+
- /* mm/page_alloc.c */
- extern void drain_local_pages(void);
- extern void mark_free_pages(struct zone *zone);
-diff --git a/kernel/power/main.c b/kernel/power/main.c
-index f71c950..d87bf0d 100644
---- a/kernel/power/main.c
-+++ b/kernel/power/main.c
-@@ -31,6 +31,10 @@ DEFINE_MUTEX(pm_mutex);
- unsigned int pm_flags;
- EXPORT_SYMBOL(pm_flags);
- 
-+int global_inside_suspend;
-+EXPORT_SYMBOL(global_inside_suspend);
-+
-+
- #ifdef CONFIG_SUSPEND
- 
- /* This is just an arbitrary number */
-@@ -156,10 +160,12 @@ int suspend_devices_and_enter(suspend_state_t state)
- 	if (!suspend_ops)
- 		return -ENOSYS;
- 
-+	global_inside_suspend = 1;
-+
- 	if (suspend_ops->set_target) {
- 		error = suspend_ops->set_target(state);
- 		if (error)
--			return error;
-+			goto bail;
- 	}
- 	suspend_console();
- 	error = device_suspend(PMSG_SUSPEND);
-@@ -183,6 +189,8 @@ int suspend_devices_and_enter(suspend_state_t state)
- 	device_resume();
-  Resume_console:
- 	resume_console();
-+bail:
-+	global_inside_suspend = 0;
- 	return error;
- }
- 
-diff --git a/kernel/printk.c b/kernel/printk.c
-index 89011bf..c8691bc 100644
---- a/kernel/printk.c
-+++ b/kernel/printk.c
-@@ -33,8 +33,11 @@
- #include <linux/bootmem.h>
- #include <linux/syscalls.h>
- #include <linux/jiffies.h>
-+#include <linux/suspend.h>
- 
- #include <asm/uaccess.h>
-+#include <asm/plat-s3c24xx/neo1973.h>
-+#include <asm/arch/gta02.h>
- 
- #define __LOG_BUF_LEN	(1 << CONFIG_LOG_BUF_SHIFT)
- 
-@@ -61,6 +64,12 @@ int console_printk[4] = {
- int oops_in_progress;
- EXPORT_SYMBOL(oops_in_progress);
- 
-+void (*printk_emergency_debug_spew_init)(void) = NULL;
-+EXPORT_SYMBOL(printk_emergency_debug_spew_init);
-+
-+void (*printk_emergency_debug_spew_send_string)(const char *) = NULL;
-+EXPORT_SYMBOL(printk_emergency_debug_spew_send_string);
-+
- /*
-  * console_sem protects the console_drivers list, and also
-  * provides serialisation for access to the entire console
-@@ -653,6 +662,38 @@ asmlinkage int vprintk(const char *fmt, va_list args)
- 	/* Emit the output into the temporary buffer */
- 	printed_len = vscnprintf(printk_buf, sizeof(printk_buf), fmt, args);
- 
-+	/* if you're debugging resume, the normal methods can change resume
-+	 * ordering behaviours because their debugging output is synchronous
-+	 * (ie, CONFIG_DEBUG_LL).  If your problem is an OOPS, this code
-+	 * will not affect the speed and duration and ordering of resume
-+	 * actions, but will give you a chance to read the full undumped
-+	 * syslog AND the OOPS data when it happens
-+	 *
-+	 * if you support it, your debug device init can override the exported
-+	 * emergency_debug_spew_init and emergency_debug_spew_send_string to
-+	 * usually force polling or bitbanging on your debug console device
-+	 */
-+	if (oops_in_progress && global_inside_suspend &&
-+	    printk_emergency_debug_spew_init &&
-+	    printk_emergency_debug_spew_send_string) {
-+		unsigned long cur_index;
-+		char ch[2];
-+
-+		if (global_inside_suspend == 1) {
-+			(printk_emergency_debug_spew_init)();
-+
-+			ch[1] = '\0';
-+			cur_index = con_start;
-+			while (cur_index != log_end) {
-+				ch[0] = LOG_BUF(cur_index);
-+				(printk_emergency_debug_spew_send_string)(ch);
-+				cur_index++;
-+			}
-+			global_inside_suspend++; /* only once */
-+		}
-+		(printk_emergency_debug_spew_send_string)(printk_buf);
-+	}
-+
- 	/*
- 	 * Copy the output into log_buf.  If the caller didn't provide
- 	 * appropriate log level tags, we insert them here
--- 
-1.5.6.5
-