summaryrefslogtreecommitdiff
path: root/target/linux/s3c24xx/patches-2.6.24/1170-introduce-charging-led-behaviour.patch.patch
diff options
context:
space:
mode:
authormirko <mirko@3c298f89-4303-0410-b956-a3cf2f4a3e73>2008-12-12 11:58:53 +0000
committermirko <mirko@3c298f89-4303-0410-b956-a3cf2f4a3e73>2008-12-12 11:58:53 +0000
commitfc54b9bf158eea9cae647ce2c58f7d9989af173a (patch)
tree54644c1229434d7ee13c5872bda4129e34337fc0 /target/linux/s3c24xx/patches-2.6.24/1170-introduce-charging-led-behaviour.patch.patch
parentd9f49b62b28ebd245587854efa484974d90debbf (diff)
changed Makefile and profiles, added patches for kernel 2.6.24
(stable-branch of Openmoko) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13613 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1170-introduce-charging-led-behaviour.patch.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.24/1170-introduce-charging-led-behaviour.patch.patch423
1 files changed, 423 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1170-introduce-charging-led-behaviour.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1170-introduce-charging-led-behaviour.patch.patch
new file mode 100644
index 0000000000..c2833bdb23
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.24/1170-introduce-charging-led-behaviour.patch.patch
@@ -0,0 +1,423 @@
+From bf74b8891e80dfceb72002f12c7d3c9978631dc0 Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Wed, 2 Jul 2008 22:37:47 +0100
+Subject: [PATCH] introduce-charging-led-behaviour.patch
+
+Creates a new behaviour requested by Will that the red LED on GTA02
+is lit during battery charging.and goes out when the battery is full.
+
+This is done by leveraging the PMU interrupts, but in one scenario
+there is no interrupt that occurs, when the battery is replaced after
+being removed with the USB power in all the while. So a sleepy work
+function is started under those circumstances to watch for battery
+reinsertion or USB cable pull.
+
+100mA limit was not being observed under some conditions so this was
+fixed and tested with a USB cable with D+/D- disconnected. 1A
+charger behaviour was also tested.
+
+Showing the charging action exposes some inconsistency in pcf50633
+charging action. If your battery is nearly full, it will keep
+charging it at decreasing current even after it thinks it is at
+100% capacity for a long while. But if you pull that same battery
+and re-insert it, the charger state machine in pcf50633 believe it is
+full and won't charge it.
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ arch/arm/mach-s3c2440/mach-gta02.c | 8 ++
+ drivers/i2c/chips/pcf50633.c | 212 ++++++++++++++++++++++++++++++++++--
+ include/linux/pcf506xx.h | 2 +
+ 3 files changed, 214 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
+index 601f7bc..d7882ea 100644
+--- a/arch/arm/mach-s3c2440/mach-gta02.c
++++ b/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -437,6 +437,14 @@ static int pmu_callback(struct device *dev, unsigned int feature,
+ case PMU_EVT_USB_REMOVE:
+ pcf50633_charge_enable(pcf50633_global, 0);
+ break;
++ case PMU_EVT_CHARGER_IDLE:
++ /* printk(KERN_ERR"PMU_EVT_CHARGER_IDLE\n"); */
++ neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, 0);
++ break;
++ case PMU_EVT_CHARGER_ACTIVE:
++ /* printk(KERN_ERR"PMU_EVT_CHARGER_ACTIVE\n"); */
++ neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, 1);
++ break;
+ default:
+ break;
+ }
+diff --git a/drivers/i2c/chips/pcf50633.c b/drivers/i2c/chips/pcf50633.c
+index 2878baa..2ed6dc0 100644
+--- a/drivers/i2c/chips/pcf50633.c
++++ b/drivers/i2c/chips/pcf50633.c
+@@ -47,6 +47,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/pcf50633.h>
+ #include <linux/apm-emulation.h>
++#include <linux/jiffies.h>
+
+ #include <asm/mach-types.h>
+ #include <asm/arch/gta02.h>
+@@ -121,8 +122,23 @@ struct pcf50633_data {
+ int onkey_seconds;
+ int irq;
+ int have_been_suspended;
++ int usb_removal_count;
+ unsigned char pcfirq_resume[5];
+
++ /* if he pulls battery while charging, we notice that and correctly
++ * report that the charger is idle. But there is no interrupt that
++ * fires if he puts a battery back in and charging resumes. So when
++ * the battery is pulled, we run this work function looking for
++ * either charger resumption or USB cable pull
++ */
++ struct mutex working_lock_nobat;
++ struct work_struct work_nobat;
++ int working_nobat;
++ int usb_removal_count_nobat;
++ int jiffies_last_bat_ins;
++
++ int last_curlim_set;
++
+ int coldplug_done; /* cleared by probe, set by first work service */
+ int flag_bat_voltage_read; /* ipc to /sys batt voltage read func */
+
+@@ -259,6 +275,8 @@ static u_int16_t async_adc_complete(struct pcf50633_data *pcf)
+ (__reg_read(pcf, PCF50633_REG_ADCS3) &
+ PCF50633_ADCS3_ADCDAT1L_MASK);
+
++ DEBUGPC("adc result = %d\n", ret);
++
+ return ret;
+ }
+
+@@ -512,8 +530,7 @@ static void configure_pmu_for_charger(struct pcf50633_data *pcf,
+ {
+ switch (type) {
+ case CHARGER_TYPE_NONE:
+- __reg_write(pcf, PCF50633_REG_MBCC7,
+- PCF50633_MBCC7_USB_SUSPEND);
++ pcf50633_usb_curlim_set(pcf, 0);
+ break;
+ /*
+ * the PCF50633 has a feature that it will supply only excess current
+@@ -521,10 +538,19 @@ static void configure_pmu_for_charger(struct pcf50633_data *pcf,
+ * 500mA setting is "up to 500mA" according to that.
+ */
+ case CHARGER_TYPE_HOSTUSB:
+- __reg_write(pcf, PCF50633_REG_MBCC7, PCF50633_MBCC7_USB_500mA);
++ /* USB subsystem should call pcf50633_usb_curlim_set to set
++ * what was negotiated with the host when it is enumerated
++ * successfully. If we get called again after a good
++ * negotiation, we keep what was negotiated. (Removal of
++ * USB plug destroys pcf->last_curlim_set to 0)
++ */
++ if (pcf->last_curlim_set > 100)
++ pcf50633_usb_curlim_set(pcf, pcf->last_curlim_set);
++ else
++ pcf50633_usb_curlim_set(pcf, 100);
+ break;
+ case CHARGER_TYPE_1A:
+- __reg_write(pcf, PCF50633_REG_MBCC7, PCF50633_MBCC7_USB_1000mA);
++ pcf50633_usb_curlim_set(pcf, 1000);
+ /*
+ * stop GPO / EN_HOSTUSB power driving out on the same
+ * USB power pins we have a 1A charger on right now!
+@@ -536,6 +562,12 @@ static void configure_pmu_for_charger(struct pcf50633_data *pcf,
+ PCF50633_REG_GPIO1CFG) & 0xf0);
+ break;
+ }
++
++ /* max out USB fast charge current -- actual current drawn is
++ * additionally limited by USB limit so no worries
++ */
++ __reg_write(pcf, PCF50633_REG_MBCC5, 0xff);
++
+ }
+
+ static void trigger_next_adc_job_if_any(struct pcf50633_data *pcf)
+@@ -562,6 +594,49 @@ static void add_request_to_adc_queue(struct pcf50633_data *pcf,
+ trigger_next_adc_job_if_any(pcf);
+ }
+
++/* we are run when we see a NOBAT situation, because there is no interrupt
++ * source in pcf50633 that triggers on resuming charging. It watches to see
++ * if charging resumes, it reassesses the charging source if it does. If the
++ * USB power disappears, it is also a sign there must be a battery and it is
++ * NOT being charged, so it exits since the next move must be USB insertion for
++ * change of charger state
++ */
++
++static void pcf50633_work_nobat(struct work_struct *work)
++{
++ struct pcf50633_data *pcf =
++ container_of(work, struct pcf50633_data, work_nobat);
++
++ mutex_lock(&pcf->working_lock_nobat);
++ pcf->working_nobat = 1;
++ mutex_unlock(&pcf->working_lock_nobat);
++
++ while (1) {
++ msleep(1000);
++
++ /* there's a battery in there now? */
++ if (reg_read(pcf, PCF50633_REG_MBCS3) & 0x40) {
++
++ pcf->jiffies_last_bat_ins = jiffies;
++
++ /* figure out our charging stance */
++ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_ADCIN1,
++ PCF50633_ADCC1_AVERAGE_16);
++ goto bail;
++ }
++
++ /* he pulled USB cable since we were started? exit then */
++ if (pcf->usb_removal_count_nobat != pcf->usb_removal_count)
++ goto bail;
++ }
++
++bail:
++ mutex_lock(&pcf->working_lock_nobat);
++ pcf->working_nobat = 0;
++ mutex_unlock(&pcf->working_lock_nobat);
++}
++
++
+ static void pcf50633_work(struct work_struct *work)
+ {
+ struct pcf50633_data *pcf =
+@@ -674,20 +749,29 @@ static void pcf50633_work(struct work_struct *work)
+ if (pcf->pdata->cb)
+ pcf->pdata->cb(&pcf->client.dev,
+ PCF50633_FEAT_MBC, PMU_EVT_USB_INSERT);
++ msleep(500); /* debounce, allow to see any ID resistor */
+ /* completion irq will figure out our charging stance */
+ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_ADCIN1,
+ PCF50633_ADCC1_AVERAGE_16);
+ }
+ if (pcfirq[0] & PCF50633_INT1_USBREM) {
+ DEBUGPC("USBREM ");
++
++ pcf->usb_removal_count++;
++
+ /* only deal if we had understood it was in */
+ if (pcf->flags & PCF50633_F_USB_PRESENT) {
+ input_report_key(pcf->input_dev, KEY_POWER2, 0);
+ apm_queue_event(APM_POWER_STATUS_CHANGE);
+ pcf->flags &= ~PCF50633_F_USB_PRESENT;
++
+ if (pcf->pdata->cb)
+ pcf->pdata->cb(&pcf->client.dev,
+ PCF50633_FEAT_MBC, PMU_EVT_USB_REMOVE);
++
++ /* destroy any memory of grant of power from host */
++ pcf->last_curlim_set = 0;
++
+ /* completion irq will figure out our charging stance */
+ add_request_to_adc_queue(pcf, PCF50633_ADCC1_MUX_ADCIN1,
+ PCF50633_ADCC1_AVERAGE_16);
+@@ -760,6 +844,33 @@ static void pcf50633_work(struct work_struct *work)
+
+ if (pcfirq[2] & PCF50633_INT3_BATFULL) {
+ DEBUGPC("BATFULL ");
++
++ /* the problem is, we get a false BATFULL if we inserted battery
++ * while USB powered. Defeat BATFULL if we recently inserted
++ * battery
++ */
++
++ if ((jiffies - pcf->jiffies_last_bat_ins) < (HZ * 2)) {
++
++ DEBUGPC("*** Ignoring BATFULL ***\n");
++
++ ret = reg_read(pcf, PCF50633_REG_MBCC7) &
++ PCF56033_MBCC7_USB_MASK;
++
++
++ reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
++ PCF56033_MBCC7_USB_MASK,
++ PCF50633_MBCC7_USB_SUSPEND);
++
++ reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
++ PCF56033_MBCC7_USB_MASK,
++ ret);
++ } else {
++ if (pcf->pdata->cb)
++ pcf->pdata->cb(&pcf->client.dev,
++ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_IDLE);
++ }
++
+ /* FIXME: signal this to userspace */
+ }
+ if (pcfirq[2] & PCF50633_INT3_CHGHALT) {
+@@ -797,8 +908,7 @@ static void pcf50633_work(struct work_struct *work)
+
+ switch (pcf->adc_queue_mux[tail]) {
+ case PCF50633_ADCC1_MUX_BATSNS_RES: /* battery voltage */
+- pcf->flag_bat_voltage_read =
+- async_adc_complete(pcf);
++ pcf->flag_bat_voltage_read = async_adc_complete(pcf);
+ break;
+ case PCF50633_ADCC1_MUX_ADCIN1: /* charger type */
+ pcf->charger_adc_result_raw = async_adc_complete(pcf);
+@@ -830,8 +940,37 @@ static void pcf50633_work(struct work_struct *work)
+ (PCF50633_MBCS1_USBPRES | PCF50633_MBCS1_USBOK)) {
+ /*
+ * hey no need to freak out, we have some kind of
+- * valid charger power
++ * valid charger power to keep us going -- but note that
++ * we are not actually charging anything
++ */
++ if (pcf->pdata->cb)
++ pcf->pdata->cb(&pcf->client.dev,
++ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_IDLE);
++
++ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
++ PCF50633_MBCC1_RESUME,
++ PCF50633_MBCC1_RESUME);
++
++ /*
++ * Well, we are not charging anything right this second
++ * ... however in the next ~30s before we get the next
++ * NOBAT, he might insert a battery. So we schedule a
++ * work function checking to see if
++ * we started charging something during that time.
++ * USB removal as well as charging terminates the work
++ * function so we can't get terminally confused
+ */
++ mutex_lock(&pcf->working_lock_nobat);
++ if (!pcf->working_nobat) {
++ pcf->usb_removal_count_nobat =
++ pcf->usb_removal_count;
++
++ if (!schedule_work(&pcf->work_nobat))
++ DEBUGPC("failed to schedule nobat\n");
++ }
++ mutex_unlock(&pcf->working_lock_nobat);
++
++
+ DEBUGPC("(NO)BAT ");
+ } else {
+ /* Really low battery voltage, we have 8 seconds left */
+@@ -1064,10 +1203,13 @@ void pcf50633_usb_curlim_set(struct pcf50633_data *pcf, int ma)
+ {
+ u_int8_t bits;
+
++ pcf->last_curlim_set = ma;
++
+ dev_dbg(&pcf->client.dev, "setting usb current limit to %d ma", ma);
+
+- if (ma >= 1000)
++ if (ma >= 1000) {
+ bits = PCF50633_MBCC7_USB_1000mA;
++ }
+ else if (ma >= 500)
+ bits = PCF50633_MBCC7_USB_500mA;
+ else if (ma >= 100)
+@@ -1075,8 +1217,40 @@ void pcf50633_usb_curlim_set(struct pcf50633_data *pcf, int ma)
+ else
+ bits = PCF50633_MBCC7_USB_SUSPEND;
+
++ DEBUGPC("pcf50633_usb_curlim_set -> %dmA\n", ma);
++
++ if (!pcf->pdata->cb)
++ goto set_it;
++
++ switch (bits) {
++ case PCF50633_MBCC7_USB_100mA:
++ case PCF50633_MBCC7_USB_SUSPEND:
++ /* no charging is gonna be happening */
++ pcf->pdata->cb(&pcf->client.dev,
++ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_IDLE);
++ break;
++ default: /* right charging context that if there is power, we charge */
++ if (pcf->flags & PCF50633_F_USB_PRESENT)
++ pcf->pdata->cb(&pcf->client.dev,
++ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_ACTIVE);
++ break;
++ }
++
++set_it:
+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC7, PCF56033_MBCC7_USB_MASK,
+ bits);
++
++ /* clear batfull */
++ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
++ PCF50633_MBCC1_AUTORES,
++ 0);
++ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
++ PCF50633_MBCC1_RESUME,
++ PCF50633_MBCC1_RESUME);
++ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
++ PCF50633_MBCC1_AUTORES,
++ PCF50633_MBCC1_AUTORES);
++
+ }
+ EXPORT_SYMBOL_GPL(pcf50633_usb_curlim_set);
+
+@@ -1106,16 +1280,36 @@ static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, NULL);
+ void pcf50633_charge_enable(struct pcf50633_data *pcf, int on)
+ {
+ u_int8_t bits;
++ u_int8_t usblim;
+
+ if (!(pcf->pdata->used_features & PCF50633_FEAT_MBC))
+ return;
+
++ DEBUGPC("pcf50633_charge_enable %d\n", on);
++
+ if (on) {
+ pcf->flags |= PCF50633_F_CHG_ENABLED;
+ bits = PCF50633_MBCC1_CHGENA;
++ usblim = reg_read(pcf, PCF50633_REG_MBCC7) &
++ PCF56033_MBCC7_USB_MASK;
++ switch (usblim) {
++ case PCF50633_MBCC7_USB_1000mA:
++ case PCF50633_MBCC7_USB_500mA:
++ if (pcf->flags & PCF50633_F_USB_PRESENT)
++ if (pcf->pdata->cb)
++ pcf->pdata->cb(&pcf->client.dev,
++ PCF50633_FEAT_MBC,
++ PMU_EVT_CHARGER_ACTIVE);
++ break;
++ default:
++ break;
++ }
+ } else {
+ pcf->flags &= ~PCF50633_F_CHG_ENABLED;
+ bits = 0;
++ if (pcf->pdata->cb)
++ pcf->pdata->cb(&pcf->client.dev,
++ PCF50633_FEAT_MBC, PMU_EVT_CHARGER_IDLE);
+ }
+ reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, PCF50633_MBCC1_CHGENA,
+ bits);
+@@ -1712,7 +1906,9 @@ static int pcf50633_detect(struct i2c_adapter *adapter, int address, int kind)
+
+ mutex_init(&data->lock);
+ mutex_init(&data->working_lock);
++ mutex_init(&data->working_lock_nobat);
+ INIT_WORK(&data->work, pcf50633_work);
++ INIT_WORK(&data->work_nobat, pcf50633_work_nobat);
+ data->irq = irq;
+ data->working = 0;
+ data->onkey_seconds = -1;
+diff --git a/include/linux/pcf506xx.h b/include/linux/pcf506xx.h
+index 33be73e..9069bd4 100644
+--- a/include/linux/pcf506xx.h
++++ b/include/linux/pcf506xx.h
+@@ -21,6 +21,8 @@ enum pmu_event {
+ PMU_EVT_USB_INSERT,
+ PMU_EVT_USB_REMOVE,
+ #endif
++ PMU_EVT_CHARGER_ACTIVE,
++ PMU_EVT_CHARGER_IDLE,
+ __NUM_PMU_EVTS
+ };
+
+--
+1.5.6.5
+