s3c2442: R.I.P.

It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34767 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 233 deletions

diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h
deleted file mode 100644
index 8f12b5e558..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright (c) 2004-2005 Atheros Communications Inc.
- * All rights reserved.
- *
- *
- * $ATH_LICENSE_HOSTSDK0_C$
- *
- * This file contains extensions of the WMI protocol specified in the
- * Wireless Module Interface (WMI).  It includes definitions of all
- * extended commands and events.  Extensions include useful commands
- * that are not directly related to wireless activities.  They may
- * be hardware-specific, and they might not be supported on all
- * implementations.
- *
- * Extended WMIX commands are encapsulated in a WMI message with
- * cmd=WMI_EXTENSION_CMD.
- *
- */
-
-#ifndef _WMIX_H_
-#define _WMIX_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef ATH_TARGET
-#include "athstartpack.h"
-#endif
-
-#include "dbglog.h"
-
-/*
- * Extended WMI commands are those that are needed during wireless
- * operation, but which are not really wireless commands.  This allows,
- * for instance, platform-specific commands.  Extended WMI commands are
- * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
- * Extended WMI events are similarly embedded in a WMI event message with
- * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
- */
-typedef PREPACK struct {
-    A_UINT32    commandId;
-} POSTPACK WMIX_CMD_HDR;
-
-typedef enum {
-    WMIX_DSETOPEN_REPLY_CMDID           = 0x2001,
-    WMIX_DSETDATA_REPLY_CMDID,
-    WMIX_GPIO_OUTPUT_SET_CMDID,
-    WMIX_GPIO_INPUT_GET_CMDID,
-    WMIX_GPIO_REGISTER_SET_CMDID,
-    WMIX_GPIO_REGISTER_GET_CMDID,
-    WMIX_GPIO_INTR_ACK_CMDID,
-    WMIX_HB_CHALLENGE_RESP_CMDID,
-    WMIX_DBGLOG_CFG_MODULE_CMDID,
-} WMIX_COMMAND_ID;
-
-typedef enum {
-    WMIX_DSETOPENREQ_EVENTID            = 0x3001,
-    WMIX_DSETCLOSE_EVENTID,
-    WMIX_DSETDATAREQ_EVENTID,
-    WMIX_GPIO_INTR_EVENTID,
-    WMIX_GPIO_DATA_EVENTID,
-    WMIX_GPIO_ACK_EVENTID,
-    WMIX_HB_CHALLENGE_RESP_EVENTID,
-    WMIX_DBGLOG_EVENTID,
-} WMIX_EVENT_ID;
-
-/*
- * =============DataSet support=================
- */
-
-/*
- * WMIX_DSETOPENREQ_EVENTID
- * DataSet Open Request Event
- */
-typedef PREPACK struct {
-    A_UINT32 dset_id;
-    A_UINT32 targ_dset_handle;  /* echo'ed, not used by Host, */
-    A_UINT32 targ_reply_fn;     /* echo'ed, not used by Host, */
-    A_UINT32 targ_reply_arg;    /* echo'ed, not used by Host, */
-} POSTPACK WMIX_DSETOPENREQ_EVENT;
-
-/*
- * WMIX_DSETCLOSE_EVENTID
- * DataSet Close Event
- */
-typedef PREPACK struct {
-    A_UINT32 access_cookie;
-} POSTPACK WMIX_DSETCLOSE_EVENT;
-
-/*
- * WMIX_DSETDATAREQ_EVENTID
- * DataSet Data Request Event
- */
-typedef PREPACK struct {
-    A_UINT32 access_cookie;
-    A_UINT32 offset;
-    A_UINT32 length;
-    A_UINT32 targ_buf;         /* echo'ed, not used by Host, */
-    A_UINT32 targ_reply_fn;    /* echo'ed, not used by Host, */
-    A_UINT32 targ_reply_arg;   /* echo'ed, not used by Host, */
-} POSTPACK WMIX_DSETDATAREQ_EVENT;
-
-typedef PREPACK struct {
-    A_UINT32              status;
-    A_UINT32              targ_dset_handle;
-    A_UINT32              targ_reply_fn;
-    A_UINT32              targ_reply_arg;
-    A_UINT32              access_cookie;
-    A_UINT32              size;
-    A_UINT32              version;
-} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
-
-typedef PREPACK struct {
-    A_UINT32              status;
-    A_UINT32              targ_buf;
-    A_UINT32              targ_reply_fn;
-    A_UINT32              targ_reply_arg;
-    A_UINT32              length;
-    A_UINT8               buf[1];
-} POSTPACK WMIX_DSETDATA_REPLY_CMD;
-
-
-/*
- * =============GPIO support=================
- * All masks are 18-bit masks with bit N operating on GPIO pin N.
- */
-
-#include "gpio.h"
-
-/*
- * Set GPIO pin output state.
- * In order for output to be driven, a pin must be enabled for output.
- * This can be done during initialization through the GPIO Configuration
- * DataSet, or during operation with the enable_mask.
- *
- * If a request is made to simultaneously set/clear or set/disable or
- * clear/disable or disable/enable, results are undefined.
- */
-typedef PREPACK struct {
-    A_UINT32              set_mask;             /* pins to set */
-    A_UINT32              clear_mask;           /* pins to clear */
-    A_UINT32              enable_mask;          /* pins to enable for output */
-    A_UINT32              disable_mask;         /* pins to disable/tristate */
-} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
-
-/*
- * Set a GPIO register.  For debug/exceptional cases.
- * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
- * platform-dependent header.
- */
-typedef PREPACK struct {
-    A_UINT32              gpioreg_id;           /* GPIO register ID */
-    A_UINT32              value;                /* value to write */
-} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
-
-/* Get a GPIO register.  For debug/exceptional cases. */
-typedef PREPACK struct {
-    A_UINT32              gpioreg_id;           /* GPIO register to read */
-} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
-
-/*
- * Host acknowledges and re-arms GPIO interrupts.  A single
- * message should be used to acknowledge all interrupts that
- * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
- */
-typedef PREPACK struct {
-    A_UINT32              ack_mask;             /* interrupts to acknowledge */
-} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
-
-/*
- * Target informs Host of GPIO interrupts that have ocurred since the
- * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
- * the current GPIO input values is provided -- in order to support
- * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
- */
-typedef PREPACK struct {
-    A_UINT32              intr_mask;            /* pending GPIO interrupts */
-    A_UINT32              input_values;         /* recent GPIO input values */
-} POSTPACK WMIX_GPIO_INTR_EVENT;
-
-/*
- * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
- * using a GPIO_DATA_EVENT with
- *   value set to the mask of GPIO pin inputs and
- *   reg_id set to GPIO_ID_NONE
- *
- *
- * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
- * using a GPIO_DATA_EVENT with
- *   value set to the value of the requested register and
- *   reg_id identifying the register (reflects the original request)
- * NB: reg_id supports the future possibility of unsolicited
- * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
- * simplify Host GPIO support.
- */
-typedef PREPACK struct {
-    A_UINT32              value;
-    A_UINT32              reg_id;
-} POSTPACK WMIX_GPIO_DATA_EVENT;
-
-/*
- * =============Error Detection support=================
- */
-
-/*
- * WMIX_HB_CHALLENGE_RESP_CMDID
- * Heartbeat Challenge Response command
- */
-typedef PREPACK struct {
-    A_UINT32              cookie;
-    A_UINT32              source;
-} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
-
-/*
- * WMIX_HB_CHALLENGE_RESP_EVENTID
- * Heartbeat Challenge Response Event
- */
-#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
-
-typedef PREPACK struct {
-    struct dbglog_config_s config;
-} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
-
-#ifndef ATH_TARGET
-#include "athendpack.h"
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _WMIX_H_ */