since the generic 2.6.24 support is gone, remove it for rb532 as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15444 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 0 insertions, 356 deletions

diff --git a/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch b/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch
deleted file mode 100644
index f9eae4b522..0000000000
--- a/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch
+++ /dev/null
@@ -1,95 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -687,6 +687,23 @@ config WR_PPMC
- 	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
- 	  board, which is based on GT64120 bridge chip.
- 
-+config MIKROTIK_RB500
-+	bool "Support for RB5xx boards"
-+	select HW_HAS_PCI
-+       select CEVT_R4K
-+       select CSRC_R4K
-+	select IRQ_CPU
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SWAP_IO_SPACE
-+	select DMA_NONCOHERENT
-+	select GENERIC_GPIO
-+	help
-+	  Support the Mikrotik(tm) Routerboard 500 series,
-+	  such as the RB532.
-+
-+
- endchoice
- 
- source "arch/mips/au1000/Kconfig"
-@@ -967,6 +984,7 @@ config MIPS_L1_CACHE_SHIFT
- 	default "4" if MACH_DECSTATION
- 	default "7" if SGI_IP27 || SNI_RM
- 	default "4" if PMC_MSP4200_EVAL
-+	default "4" if MIKROTIK_RB500
- 	default "5"
- 
- config HAVE_STD_PC_SERIAL_PORT
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -297,6 +297,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff
- cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
- 
- #
-+# Routerboard 532 board
-+#
-+core-$(CONFIG_MIKROTIK_RB500)  += arch/mips/rb500/
-+cflags-$(CONFIG_MIKROTIK_RB500)        += -Iinclude/asm-mips/rc32434
-+load-$(CONFIG_MIKROTIK_RB500)  += 0xffffffff80101000
-+
-+#
- # For all MIPS, Inc. eval boards
- #
- core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
- obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
-+obj-$(CONFIG_MIKROTIK_RB500)	+= pci-rc32434.o ops-rc32434.o fixup-rb500.o
---- a/drivers/pci/Makefile
-+++ b/drivers/pci/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o
- obj-$(CONFIG_PPC64) += setup-bus.o
- obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
- obj-$(CONFIG_X86_VISWS) += setup-irq.o
-+obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
- 
- #
- # ACPI Related PCI FW Functions
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -198,6 +198,14 @@
- #define MACH_GROUP_BRCM		23	/* Broadcom			*/
- #define  MACH_BCM47XX		1	/* Broadcom BCM47XX		*/
- 
-+
-+/*
-+ * Valid machtype for group Mikrotik
-+ */
-+#define MACH_GROUP_MIKROTIK    29      /* Mikrotik Boards                       */
-+#define  MACH_MIKROTIK_RB532   0       /* Mikrotik RouterBoard 532 */
-+#define  MACH_MIKROTIK_RB532A  1       /* Mikrotik RouterBoard 532A */
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);
---- a/include/asm-mips/cpu.h
-+++ b/include/asm-mips/cpu.h
-@@ -196,7 +196,7 @@ enum cpu_type_enum {
- 	 */
- 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000,
- 	CPU_AU1100, CPU_AU1200, CPU_AU1500, CPU_AU1550, CPU_PR4450,
--	CPU_BCM3302, CPU_BCM4710,
-+	CPU_BCM3302, CPU_BCM4710, CPU_RC32300,
- 
- 	/*
- 	 * MIPS64 class processors
diff --git a/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch b/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch
deleted file mode 100644
index 3c46590f94..0000000000
--- a/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -362,6 +362,13 @@ config AX88796_93CX6
- 	help
- 	  Select this if your platform comes with an external 93CX6 eeprom.
- 
-+config KORINA
-+	tristate "Korina Local Ethernet support"
-+	depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500)
-+	help
-+	IDT RC32434 has one local ethernet port. Say Y here to enable it.
-+	To compile this driver as a module, choose M here.
-+
- config MACE
- 	tristate "MACE (Power Mac ethernet) support"
- 	depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -30,6 +30,8 @@ ucc_geth_driver-objs := ucc_geth.o ucc_g
- #
- obj-$(CONFIG_PLIP) += plip.o
- 
-+obj-$(CONFIG_KORINA) += korina.o
-+
- obj-$(CONFIG_ROADRUNNER) += rrunner.o
- 
- obj-$(CONFIG_HAPPYMEAL) += sunhme.o
diff --git a/target/linux/rb532/patches-2.6.24/120-cf.patch b/target/linux/rb532/patches-2.6.24/120-cf.patch
deleted file mode 100644
index 15b84a1dbc..0000000000
--- a/target/linux/rb532/patches-2.6.24/120-cf.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/block/Kconfig
-+++ b/drivers/block/Kconfig
-@@ -408,6 +408,14 @@ config SUNVDC
- 	  Support for virtual disk devices as a client under Sun
- 	  Logical Domains.
- 
-+config BLK_DEV_CF_MIPS
-+	bool "CF slot of RB532 board"
-+	depends on MIKROTIK_RB500
-+	default y
-+	help
-+	 The Routerboard 532 has a CF slot on it. Enable the special block
-+	 device driver for it.
-+
- source "drivers/s390/block/Kconfig"
- 
- config XILINX_SYSACE
---- a/drivers/block/Makefile
-+++ b/drivers/block/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_DEV_DAC960)	+= DAC960.o
- obj-$(CONFIG_XILINX_SYSACE)	+= xsysace.o
- obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
- obj-$(CONFIG_SUNVDC)		+= sunvdc.o
-+obj-$(CONFIG_BLK_DEV_CF_MIPS)	+= rb500/
- 
- obj-$(CONFIG_BLK_DEV_UMEM)	+= umem.o
- obj-$(CONFIG_BLK_DEV_NBD)	+= nbd.o
diff --git a/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch b/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch
deleted file mode 100644
index 29a4e19665..0000000000
--- a/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -122,6 +122,10 @@
- 
- 	j kernel_entry
- 	nop
-+
-+EXPORT(_image_cmdline)
-+       .ascii "CMDLINE:"
-+
- #ifndef CONFIG_NO_EXCEPT_FILL
- 	/*
- 	 * Reserved space for exception handlers.
diff --git a/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch b/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch
deleted file mode 100644
index 552b7282ee..0000000000
--- a/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -64,8 +64,10 @@ pcibios_align_resource(void *data, struc
- 		/*
- 		 * Put everything into 0x00-0xff region modulo 0x400
- 		 */
-+#ifndef CONFIG_MIKROTIK_RB500
- 		if (start & 0x300)
- 			start = (start + 0x3ff) & ~0x3ff;
-+#endif
- 	} else if (res->flags & IORESOURCE_MEM) {
- 		/* Make sure we start at our min on all hoses */
- 		if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
diff --git a/target/linux/rb532/patches-2.6.24/220-serial_fix.patch b/target/linux/rb532/patches-2.6.24/220-serial_fix.patch
deleted file mode 100644
index 59194da34d..0000000000
--- a/target/linux/rb532/patches-2.6.24/220-serial_fix.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -433,6 +433,13 @@ serial_out(struct uart_8250_port *up, in
- 	default:
- 		outb(value, up->port.iobase + offset);
- 	}
-+
-+#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500)
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+#endif
- }
- 
- static void
diff --git a/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch b/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch
deleted file mode 100644
index ba66d40bd3..0000000000
--- a/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/drivers/net/via-rhine.c
-+++ b/drivers/net/via-rhine.c
-@@ -33,6 +33,8 @@
- #define DRV_VERSION	"1.4.3"
- #define DRV_RELDATE	"2007-03-06"
- 
-+#define PKT_ALIGN 1
-+
- 
- /* A few user-configurable values.
-    These may be modified when a driver module is loaded. */
-@@ -40,6 +42,7 @@
- static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */
- static int max_interrupt_work = 20;
- 
-+#ifndef PKT_ALIGN
- /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
-    Setting to > 1518 effectively disables this feature. */
- #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-@@ -49,6 +52,7 @@ static int rx_copybreak = 1518;
- #else
- static int rx_copybreak;
- #endif
-+#endif /* PKT_ALIGN */
- 
- /* Work-around for broken BIOSes: they are unable to get the chip back out of
-    power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
-@@ -111,6 +115,7 @@ static const int multicast_filter_limit 
- #include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/uaccess.h>
-+#include <asm/unaligned.h>
- #include <linux/dmi.h>
- 
- /* These identify the driver base version and may not be removed. */
-@@ -130,12 +135,14 @@ MODULE_LICENSE("GPL");
- 
- module_param(max_interrupt_work, int, 0);
- module_param(debug, int, 0);
--module_param(rx_copybreak, int, 0);
- module_param(avoid_D3, bool, 0);
- MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
- MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
--MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
- MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
-+#ifndef PKT_ALIGN
-+module_param(rx_copybreak, int, 0);
-+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
-+#endif
- 
- /*
- 		Theory of Operation
-@@ -922,7 +929,7 @@ static void alloc_rbufs(struct net_devic
- 
- 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
- 	for (i = 0; i < RX_RING_SIZE; i++) {
--		struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
-+		struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4);
- 		rp->rx_skbuff[i] = skb;
- 		if (skb == NULL)
- 			break;
-@@ -1485,7 +1492,9 @@ static int rhine_rx(struct net_device *d
- 			struct sk_buff *skb;
- 			/* Length should omit the CRC */
- 			int pkt_len = data_size - 4;
--
-+#ifdef PKT_ALIGN
-+			int i;
-+#else
- 			/* Check if the packet is long enough to accept without
- 			   copying to a minimally-sized skbuff. */
- 			if (pkt_len < rx_copybreak &&
-@@ -1504,7 +1513,9 @@ static int rhine_rx(struct net_device *d
- 							       rp->rx_skbuff_dma[entry],
- 							       rp->rx_buf_sz,
- 							       PCI_DMA_FROMDEVICE);
--			} else {
-+			} else
-+#endif
-+			{
- 				skb = rp->rx_skbuff[entry];
- 				if (skb == NULL) {
- 					printk(KERN_ERR "%s: Inconsistent Rx "
-@@ -1518,6 +1529,14 @@ static int rhine_rx(struct net_device *d
- 						 rp->rx_skbuff_dma[entry],
- 						 rp->rx_buf_sz,
- 						 PCI_DMA_FROMDEVICE);
-+#ifdef PKT_ALIGN
-+				/* align the data to the ip header - should be faster than copying the entire packet */
-+				for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) {
-+					put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2));
-+				}
-+				skb->data += 2;
-+				skb->tail += 2;
-+#endif
- 			}
- 			skb->protocol = eth_type_trans(skb, dev);
- #ifdef CONFIG_VIA_RHINE_NAPI
diff --git a/target/linux/rb532/patches-2.6.24/510-rb500_led.patch b/target/linux/rb532/patches-2.6.24/510-rb500_led.patch
deleted file mode 100644
index d38b427fd0..0000000000
--- a/target/linux/rb532/patches-2.6.24/510-rb500_led.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -120,6 +120,12 @@ config LEDS_CM_X270
- 	help
- 	  This option enables support for the CM-X270 LEDs.
- 
-+config LEDS_RB500
-+	tristate "LED Support for RB5xx boards"
-+	depends on LEDS_CLASS && MIKROTIK_RB500
-+	help
-+	  This option enables support for the yellow user LED on RB5xx boards.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-
- obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
- obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
- obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
-+obj-$(CONFIG_LEDS_RB500)		+= leds-rb500.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch b/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch
deleted file mode 100644
index cfcf69777b..0000000000
--- a/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/kernel/time.c
-+++ b/arch/mips/kernel/time.c
-@@ -75,6 +75,7 @@ EXPORT_SYMBOL(perf_irq);
-  */
- 
- unsigned int mips_hpt_frequency;
-+EXPORT_SYMBOL(mips_hpt_frequency);
- 
- void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
- {
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -639,6 +639,18 @@ config AR7_WDT
- 	help
- 	  Hardware driver for the TI AR7 Watchdog Timer.
- 
-+config RC32434_WDT
-+	tristate "IDT Interprise 79RC32434 SoC hardware watchdog"
-+	depends on WATCHDOG && MIKROTIK_RB500
-+	help
-+	  This is a driver for hardware watchdog integrated in IDT Interprise
-+	  79RC32434 SoC. This watchdog simply watches your kernel to make sure
-+	  it doesn't freeze, and if it does, it reboots your computer after a
-+	  certain amount of time.
-+	  
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called rc32434_wdt.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
diff --git a/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch b/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch
deleted file mode 100644
index 1e79bfcd0e..0000000000
--- a/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/lib/iomap-pci.c
-+++ b/arch/mips/lib/iomap-pci.c
-@@ -32,7 +32,7 @@ static void __iomem *ioport_map_pci(stru
- 		       "report it to linux-mips@linux-mips.org or your "
- 		       "vendor.\n", name);
- #ifdef CONFIG_PCI_DOMAINS
--		panic("To avoid data corruption io_map_base MUST be set with "
-+		printk(KERN_WARNING "To avoid data corruption io_map_base MUST be set with "
- 		      "multiple PCI domains.");
- #endif
- 	}