upgrade orion to 2.6.28-rc7

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13580 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 82 insertions, 19958 deletions

diff --git a/target/linux/orion/Makefile b/target/linux/orion/Makefile
index e4583a7516..a259c54e27 100644
--- a/target/linux/orion/Makefile
+++ b/target/linux/orion/Makefile
@@ -11,13 +11,13 @@ BOARD:=orion
 BOARDNAME:=Marvell Orion
 FEATURES:=squashfs
 
-LINUX_VERSION:=2.6.26.8
+LINUX_VERSION:=2.6.28-rc7
 
 include $(INCLUDE_DIR)/target.mk
 
 KERNELNAME:="uImage"
 
-DEFAULT_PACKAGES += kmod-madwifi
+DEFAULT_PACKAGES += kmod-ath9k-new hostapd-mini
 
 define Kernel/Configure
 	$(call Kernel/Configure/Default)
diff --git a/target/linux/orion/base-files/etc/config/network b/target/linux/orion/base-files/etc/config/network
new file mode 100644
index 0000000000..e7fdecd0e0
--- /dev/null
+++ b/target/linux/orion/base-files/etc/config/network
@@ -0,0 +1,22 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+        option ifname   lo
+        option proto    static
+        option ipaddr   127.0.0.1
+        option netmask  255.0.0.0
+
+config interface eth0
+	option ifname	eth0
+
+config interface wan
+	option ifname	wan
+	option proto	dhcp
+	option hostname	openwrt
+
+config interface lan
+        option ifname   "lan1 lan2 lan3 lan4"
+        option type     bridge
+        option proto    static
+        option ipaddr   192.168.1.1
+        option netmask  255.255.255.0
diff --git a/target/linux/orion/config-default b/target/linux/orion/config-default
index 2a14a49e9e..6b69d844a9 100644
--- a/target/linux/orion/config-default
+++ b/target/linux/orion/config-default
@@ -27,6 +27,7 @@ CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_MSM7X00A is not set
 # CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -62,6 +63,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BONDING is not set
 CONFIG_BOUNCE=y
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_BSD_DISKLABEL is not set
 # CONFIG_BT is not set
 # CONFIG_CIFS_STATS is not set
@@ -97,6 +99,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_E100 is not set
 # CONFIG_E1000E_ENABLED is not set
 # CONFIG_FARSYNC is not set
+# CONFIG_FIXED_PHY is not set
 # CONFIG_FPE_FASTFPE is not set
 # CONFIG_FPE_NWFPE is not set
 CONFIG_FRAME_POINTER=y
@@ -173,17 +176,24 @@ CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
 # CONFIG_MACH_DB88F5281 is not set
 # CONFIG_MACH_DNS323 is not set
+# CONFIG_MACH_EDMINI_V2 is not set
 # CONFIG_MACH_KUROBOX_PRO is not set
+# CONFIG_MACH_LINKSTATION_MINI is not set
 # CONFIG_MACH_LINKSTATION_PRO is not set
 # CONFIG_MACH_MV2120 is not set
 # CONFIG_MACH_MSS2 is not set
+# CONFIG_MACH_RD88F5181L_FXO is not set
+# CONFIG_MACH_RD88F5181L_GE is not set
 # CONFIG_MACH_RD88F5182 is not set
+# CONFIG_MACH_RD88F6183AP_GE is not set
+# CONFIG_MACH_TERASTATION_PRO2 is not set
 # CONFIG_MACH_TS209 is not set
 # CONFIG_MACH_TS409 is not set
 # CONFIG_MACH_TS78XX is not set
 CONFIG_MACH_WNR854T=y
 CONFIG_MACH_WRT350N_V2=y
 # CONFIG_MAC_PARTITION is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_MEDIA_TUNER=m
 # CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
 CONFIG_MEDIA_TUNER_MT20XX=m
@@ -194,6 +204,8 @@ CONFIG_MEDIA_TUNER_TEA5761=m
 CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_MMC_TEST is not set
 CONFIG_MTD=y
@@ -249,11 +261,14 @@ CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA=y
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_SCH_NETEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NEW_LEDS is not set
 # CONFIG_NLS_CODEPAGE_437 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
 # CONFIG_NLS_ISO8859_1 is not set
@@ -262,6 +277,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NO_IOPORT is not set
 # CONFIG_NVRAM is not set
 # CONFIG_OABI_COMPAT is not set
+# CONFIG_ORION5X_WATCHDOG is not set
 # CONFIG_OUTER_CACHE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PATA_ARTOP=m
@@ -274,7 +290,9 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_PLAT_ORION=y
 # CONFIG_PPP is not set
 # CONFIG_PRISM54 is not set
+# CONFIG_QSEMI_PHY is not set
 # CONFIG_R6040 is not set
+# CONFIG_REALTEK_PHY is not set
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_DEBUG is not set
 # CONFIG_RTC_DRV_DS1307 is not set
@@ -309,6 +327,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SHMEM is not set
 CONFIG_SLABINFO=y
 # CONFIG_SMC91X is not set
+# CONFIG_SMSC_PHY is not set
 # CONFIG_SND_AW2 is not set
 # CONFIG_SOC_CAMERA is not set
 # CONFIG_SOFT_WATCHDOG is not set
diff --git a/target/linux/orion/patches/000-orion_git_sync.patch b/target/linux/orion/patches/000-orion_git_sync.patch
deleted file mode 100644
index 283ec05558..0000000000
--- a/target/linux/orion/patches/000-orion_git_sync.patch
+++ /dev/null
@@ -1,19752 +0,0 @@
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -2691,12 +2691,10 @@ L:	libertas-dev@lists.infradead.org
- S:	Maintained
- 
- MARVELL MV643XX ETHERNET DRIVER
--P:	Dale Farnsworth
--M:	dale@farnsworth.org
--P:	Manish Lachwani
--M:	mlachwani@mvista.com
-+P:	Lennert Buytenhek
-+M:	buytenh@marvell.com
- L:	netdev@vger.kernel.org
--S:	Odd Fixes for 2.4; Maintained for 2.6.
-+S:	Supported
- 
- MATROX FRAMEBUFFER DRIVER
- P:	Petr Vandrovec
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -84,6 +84,11 @@ config STACKTRACE_SUPPORT
- 	bool
- 	default y
- 
-+config HAVE_LATENCYTOP_SUPPORT
-+	bool
-+	depends on !SMP
-+	default y
-+
- config LOCKDEP_SUPPORT
- 	bool
- 	default y
-@@ -347,6 +352,16 @@ config ARCH_L7200
- 	  If you have any questions or comments about the Linux kernel port
- 	  to this board, send e-mail to <sjhill@cotw.com>.
- 
-+config ARCH_KIRKWOOD
-+	bool "Marvell Kirkwood"
-+	select PCI
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
-+	select PLAT_ORION
-+	help
-+	  Support for the following Marvell Kirkwood series SoCs:
-+	  88F6180, 88F6192 and 88F6281.
-+
- config ARCH_KS8695
- 	bool "Micrel/Kendin KS8695"
- 	select GENERIC_GPIO
-@@ -365,6 +380,24 @@ config ARCH_NS9XXX
- 
- 	  <http://www.digi.com/products/microprocessors/index.jsp>
- 
-+config ARCH_LOKI
-+	bool "Marvell Loki (88RC8480)"
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
-+	select PLAT_ORION
-+	help
-+	  Support for the Marvell Loki (88RC8480) SoC.
-+
-+config ARCH_MV78XX0
-+	bool "Marvell MV78xx0"
-+	select PCI
-+	select GENERIC_TIME
-+	select GENERIC_CLOCKEVENTS
-+	select PLAT_ORION
-+	help
-+	  Support for the following Marvell MV78xx0 series SoCs:
-+	  MV781x0, MV782x0.
-+
- config ARCH_MXC
- 	bool "Freescale MXC/iMX-based"
- 	select ARCH_MTD_XIP
-@@ -381,7 +414,8 @@ config ARCH_ORION5X
- 	select PLAT_ORION
- 	help
- 	  Support for the following Marvell Orion 5x series SoCs:
--	  Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
-+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-+	  Orion-2 (5281).
- 
- config ARCH_PNX4008
- 	bool "Philips Nexperia PNX4008 Mobile"
-@@ -502,6 +536,10 @@ source "arch/arm/mach-ixp2000/Kconfig"
- 
- source "arch/arm/mach-ixp23xx/Kconfig"
- 
-+source "arch/arm/mach-loki/Kconfig"
-+
-+source "arch/arm/mach-mv78xx0/Kconfig"
-+
- source "arch/arm/mach-pxa/Kconfig"
- 
- source "arch/arm/mach-sa1100/Kconfig"
-@@ -514,6 +552,8 @@ source "arch/arm/mach-omap2/Kconfig"
- 
- source "arch/arm/mach-orion5x/Kconfig"
- 
-+source "arch/arm/mach-kirkwood/Kconfig"
-+
- source "arch/arm/plat-s3c24xx/Kconfig"
- source "arch/arm/plat-s3c/Kconfig"
- 
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -135,11 +135,14 @@ endif
-  machine-$(CONFIG_ARCH_NETX)	   := netx
-  machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
-  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
-+ machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
-  machine-$(CONFIG_ARCH_KS8695)     := ks8695
-   incdir-$(CONFIG_ARCH_MXC)	   := mxc
-  machine-$(CONFIG_ARCH_MX3)	   := mx3
-  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
-  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
-+ machine-$(CONFIG_ARCH_LOKI)       := loki
-+ machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- 
- ifeq ($(CONFIG_ARCH_EBSA110),y)
- # This is what happens if you forget the IOCS16 line.
---- a/arch/arm/boot/compressed/head.S
-+++ b/arch/arm/boot/compressed/head.S
-@@ -623,8 +623,8 @@ proc_types:
- 		b	__armv4_mmu_cache_off
- 		b	__armv4_mmu_cache_flush
- 
--		.word	0x56055310		@ Feroceon
--		.word	0xfffffff0
-+		.word	0x56050000		@ Feroceon
-+		.word	0xff0f0000
- 		b	__armv4_mmu_cache_on
- 		b	__armv4_mmu_cache_off
- 		b	__armv5tej_mmu_cache_flush
---- /dev/null
-+++ b/arch/arm/configs/kirkwood_defconfig
-@@ -0,0 +1,1426 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.26-rc5
-+# Sun Jun 22 15:51:25 2008
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ARCH_SUPPORTS_AOUT=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+# CONFIG_SYSFS_DEPRECATED_V2 is not set
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_SYSCTL_SYSCALL_CHECK=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=y
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_KRETPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+CONFIG_ARCH_KIRKWOOD=y
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_LOKI is not set
-+# CONFIG_ARCH_MV78XX0 is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_ORION5X is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+# CONFIG_ARCH_MSM7X00A is not set
-+
-+#
-+# Marvell Kirkwood Implementations
-+#
-+CONFIG_MACH_DB88F6281_BP=y
-+CONFIG_MACH_RD88F6192_NAS=y
-+CONFIG_MACH_RD88F6281=y
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+CONFIG_PLAT_ORION=y
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_FEROCEON=y
-+# CONFIG_CPU_FEROCEON_OLD_ID is not set
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5T=y
-+CONFIG_CPU_PABRT_NOIFAR=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_FEROCEON=y
-+CONFIG_CPU_TLB_FEROCEON=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+CONFIG_OUTER_CACHE=y
-+CONFIG_CACHE_FEROCEON_L2=y
-+
-+#
-+# Bus support
-+#
-+CONFIG_PCI=y
-+CONFIG_PCI_SYSCALL=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_DEBUG is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_PREEMPT=y
-+CONFIG_HZ=100
-+CONFIG_AEABI=y
-+# CONFIG_OABI_COMPAT is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE=""
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+CONFIG_NET_PKTGEN=m
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_EXT=y
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+CONFIG_MTD_CFI_ADV_OPTIONS=y
-+CONFIG_MTD_CFI_NOSWAP=y
-+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI_GEOMETRY=y
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+CONFIG_MTD_CFI_STAA=y
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_IMPA7 is not set
-+# CONFIG_MTD_INTEL_VR_NOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_DATAFLASH is not set
-+CONFIG_MTD_M25P80=y
-+CONFIG_M25PXX_USE_FAST_READ=y
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_VERIFY_WRITE=y
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_CAFE is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+CONFIG_MTD_NAND_ORION=y
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_MISC_DEVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+CONFIG_CHR_DEV_SG=m
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_ARCMSR is not set
-+# CONFIG_MEGARAID_NEWGEN is not set
-+# CONFIG_MEGARAID_LEGACY is not set
-+# CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_HPTIOP is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_IPS is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_MVSAS is not set
-+# CONFIG_SCSI_STEX is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_IPR is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_QLA_FC is not set
-+# CONFIG_SCSI_QLA_ISCSI is not set
-+# CONFIG_SCSI_LPFC is not set
-+# CONFIG_SCSI_DC395x is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_SRP is not set
-+CONFIG_ATA=y
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_SATA_PMP=y
-+# CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_SIL24 is not set
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_SVW is not set
-+# CONFIG_ATA_PIIX is not set
-+CONFIG_SATA_MV=y
-+# CONFIG_SATA_NV is not set
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_PROMISE is not set
-+# CONFIG_SATA_SX4 is not set
-+# CONFIG_SATA_SIL is not set
-+# CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_ULI is not set
-+# CONFIG_SATA_VIA is not set
-+# CONFIG_SATA_VITESSE is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_PATA_ALI is not set
-+# CONFIG_PATA_AMD is not set
-+# CONFIG_PATA_ARTOP is not set
-+# CONFIG_PATA_ATIIXP is not set
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_CMD64X is not set
-+# CONFIG_PATA_CS5520 is not set
-+# CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CYPRESS is not set
-+# CONFIG_PATA_EFAR is not set
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_HPT366 is not set
-+# CONFIG_PATA_HPT37X is not set
-+# CONFIG_PATA_HPT3X2N is not set
-+# CONFIG_PATA_HPT3X3 is not set
-+# CONFIG_PATA_IT821X is not set
-+# CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_JMICRON is not set
-+# CONFIG_PATA_TRIFLEX is not set
-+# CONFIG_PATA_MARVELL is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_OLDPIIX is not set
-+# CONFIG_PATA_NETCELL is not set
-+# CONFIG_PATA_NINJA32 is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_NS87415 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC_OLD is not set
-+# CONFIG_PATA_RADISYS is not set
-+# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SERVERWORKS is not set
-+# CONFIG_PATA_PDC2027X is not set
-+# CONFIG_PATA_SIL680 is not set
-+# CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_VIA is not set
-+# CONFIG_PATA_WINBOND is not set
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_PATA_SCH is not set
-+# CONFIG_MD is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+# CONFIG_I2O is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_ARCNET is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_AX88796 is not set
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_PCNET32 is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+# CONFIG_EEPRO100 is not set
-+# CONFIG_E100 is not set
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+# CONFIG_NE2K_PCI is not set
-+# CONFIG_8139CP is not set
-+# CONFIG_8139TOO is not set
-+# CONFIG_R6040 is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+CONFIG_E1000=y
-+CONFIG_E1000_NAPI=y
-+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-+# CONFIG_E1000E is not set
-+# CONFIG_E1000E_ENABLED is not set
-+# CONFIG_IP1000 is not set
-+# CONFIG_IGB is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+CONFIG_MV643XX_ETH=y
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+# CONFIG_NETDEV_10000 is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+# CONFIG_DEVKMEM is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_NOZOMI is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+# CONFIG_SERIAL_8250_PCI is not set
-+CONFIG_SERIAL_8250_NR_UARTS=4
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-+# CONFIG_SERIAL_8250_EXTENDED is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=16
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_DEVPORT=y
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_I810 is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_PROSAVAGE is not set
-+# CONFIG_I2C_SAVAGE4 is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+# CONFIG_I2C_VOODOO3 is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+CONFIG_I2C_MV64XXX=y
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_ORION=y
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_WATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+CONFIG_USB_EHCI_TT_NEWSCHED=y
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_OHCI_HCD is not set
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+CONFIG_USB_PRINTER=y
-+# CONFIG_USB_WDM is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+CONFIG_USB_STORAGE_DATAFAB=y
-+CONFIG_USB_STORAGE_FREECOM=y
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+CONFIG_USB_STORAGE_DPCM=y
-+# CONFIG_USB_STORAGE_USBAT is not set
-+CONFIG_USB_STORAGE_SDDR09=y
-+CONFIG_USB_STORAGE_SDDR55=y
-+CONFIG_USB_STORAGE_JUMPSHOT=y
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_GADGET is not set
-+# CONFIG_MMC is not set
-+CONFIG_NEW_LEDS=y
-+# CONFIG_LEDS_CLASS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+# CONFIG_LEDS_TRIGGERS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+CONFIG_RTC_DRV_MV=y
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_DMADEVICES=y
-+
-+#
-+# DMA Devices
-+#
-+CONFIG_MV_XOR=y
-+CONFIG_DMA_ENGINE=y
-+
-+#
-+# DMA Clients
-+#
-+# CONFIG_NET_DMA is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_XFS_FS=y
-+# CONFIG_XFS_QUOTA is not set
-+# CONFIG_XFS_POSIX_ACL is not set
-+# CONFIG_XFS_RT is not set
-+# CONFIG_XFS_DEBUG is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+CONFIG_ISO9660_FS=y
-+CONFIG_JOLIET=y
-+# CONFIG_ZISOFS is not set
-+CONFIG_UDF_FS=m
-+CONFIG_UDF_NLS=y
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+CONFIG_NLS_ISO8859_2=y
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHED_DEBUG is not set
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_PREEMPT is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_LATENCYTOP is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_DEBUG_USER=y
-+CONFIG_DEBUG_ERRORS=y
-+# CONFIG_DEBUG_STACK_USAGE is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_ASYNC_CORE=y
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+# CONFIG_CRYPTO_MD5 is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+CONFIG_CRYPTO_HW=y
-+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/arm/configs/loki_defconfig
-@@ -0,0 +1,1147 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.26-rc5
-+# Fri Jun 13 03:07:49 2008
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+# CONFIG_GENERIC_GPIO is not set
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ARCH_SUPPORTS_AOUT=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+# CONFIG_SYSFS_DEPRECATED_V2 is not set
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_SYSCTL_SYSCALL_CHECK=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+CONFIG_HAVE_OPROFILE=y
-+# CONFIG_KPROBES is not set
-+CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KIRKWOOD is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+CONFIG_ARCH_LOKI=y
-+# CONFIG_ARCH_MV78XX0 is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_ORION5X is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+# CONFIG_ARCH_MSM7X00A is not set
-+
-+#
-+# Marvell Loki (88RC8480) Implementations
-+#
-+CONFIG_MACH_LB88RC8480=y
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+CONFIG_PLAT_ORION=y
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_FEROCEON=y
-+# CONFIG_CPU_FEROCEON_OLD_ID is not set
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5T=y
-+CONFIG_CPU_PABRT_NOIFAR=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_FEROCEON=y
-+CONFIG_CPU_TLB_FEROCEON=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_PREEMPT=y
-+CONFIG_HZ=100
-+CONFIG_AEABI=y
-+CONFIG_OABI_COMPAT=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE=""
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+# CONFIG_FPE_NWFPE is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+CONFIG_NET_PKTGEN=m
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_EXT=y
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+CONFIG_FTL=y
-+CONFIG_NFTL=y
-+# CONFIG_NFTL_RW is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+CONFIG_MTD_CFI_ADV_OPTIONS=y
-+CONFIG_MTD_CFI_NOSWAP=y
-+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI_GEOMETRY=y
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+CONFIG_MTD_CFI_I4=y
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+CONFIG_MTD_CFI_STAA=y
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_IMPA7 is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+CONFIG_MTD_M25P80=y
-+CONFIG_M25PXX_USE_FAST_READ=y
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_VERIFY_WRITE=y
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+CONFIG_MTD_NAND_ORION=y
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_MISC_DEVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+CONFIG_CHR_DEV_SG=m
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+CONFIG_ATA=y
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_SATA_PMP=y
-+CONFIG_ATA_SFF=y
-+CONFIG_SATA_MV=y
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_AX88796 is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_B44 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_E1000E_ENABLED is not set
-+CONFIG_MV643XX_ETH=y
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_NR_UARTS=4
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-+# CONFIG_SERIAL_8250_EXTENDED is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=16
-+# CONFIG_IPMI_HANDLER is not set
-+CONFIG_HW_RANDOM=m
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+CONFIG_I2C_MV64XXX=y
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_WATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+CONFIG_USB_PRINTER=y
-+# CONFIG_USB_WDM is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+CONFIG_USB_STORAGE_DATAFAB=y
-+CONFIG_USB_STORAGE_FREECOM=y
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+CONFIG_USB_STORAGE_DPCM=y
-+# CONFIG_USB_STORAGE_USBAT is not set
-+CONFIG_USB_STORAGE_SDDR09=y
-+CONFIG_USB_STORAGE_SDDR55=y
-+CONFIG_USB_STORAGE_JUMPSHOT=y
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_GADGET is not set
-+# CONFIG_MMC is not set
-+CONFIG_NEW_LEDS=y
-+# CONFIG_LEDS_CLASS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+# CONFIG_LEDS_TRIGGERS is not set
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_XFS_FS=y
-+# CONFIG_XFS_QUOTA is not set
-+# CONFIG_XFS_POSIX_ACL is not set
-+# CONFIG_XFS_RT is not set
-+# CONFIG_XFS_DEBUG is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+CONFIG_ISO9660_FS=y
-+# CONFIG_JOLIET is not set
-+# CONFIG_ZISOFS is not set
-+CONFIG_UDF_FS=m
-+CONFIG_UDF_NLS=y
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_BSD_DISKLABEL=y
-+CONFIG_MINIX_SUBPARTITION=y
-+CONFIG_SOLARIS_X86_PARTITION=y
-+CONFIG_UNIXWARE_DISKLABEL=y
-+CONFIG_LDM_PARTITION=y
-+CONFIG_LDM_DEBUG=y
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+CONFIG_SUN_PARTITION=y
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+CONFIG_NLS_ISO8859_2=y
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_LATENCYTOP is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_DEBUG_USER=y
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+# CONFIG_CRYPTO_MD5 is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+CONFIG_CRYPTO_HW=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- /dev/null
-+++ b/arch/arm/configs/mv78xx0_defconfig
-@@ -0,0 +1,1445 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.26-rc5
-+# Fri Jun 13 02:57:32 2008
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+# CONFIG_GENERIC_GPIO is not set
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ARCH_SUPPORTS_AOUT=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+# CONFIG_GROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+# CONFIG_BLK_DEV_INITRD is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_SYSCTL_SYSCALL_CHECK=y
-+CONFIG_KALLSYMS=y
-+CONFIG_KALLSYMS_ALL=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+# CONFIG_SLUB_DEBUG is not set
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_PROFILING=y
-+# CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=y
-+CONFIG_HAVE_OPROFILE=y
-+CONFIG_KPROBES=y
-+CONFIG_KRETPROBES=y
-+CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+# CONFIG_HAVE_DMA_ATTRS is not set
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+CONFIG_CLASSIC_RCU=y
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KIRKWOOD is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_LOKI is not set
-+CONFIG_ARCH_MV78XX0=y
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_ORION5X is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+# CONFIG_ARCH_MSM7X00A is not set
-+
-+#
-+# Marvell MV78xx0 Implementations
-+#
-+CONFIG_MACH_DB78X00_BP=y
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+CONFIG_PLAT_ORION=y
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_FEROCEON=y
-+CONFIG_CPU_FEROCEON_OLD_ID=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5T=y
-+CONFIG_CPU_PABRT_NOIFAR=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_FEROCEON=y
-+CONFIG_CPU_TLB_FEROCEON=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+CONFIG_OUTER_CACHE=y
-+CONFIG_CACHE_FEROCEON_L2=y
-+
-+#
-+# Bus support
-+#
-+CONFIG_PCI=y
-+CONFIG_PCI_SYSCALL=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_DEBUG is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_PREEMPT=y
-+CONFIG_HZ=100
-+CONFIG_AEABI=y
-+CONFIG_OABI_COMPAT=y
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE=""
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+CONFIG_VFP=y
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+CONFIG_NET_PKTGEN=m
-+# CONFIG_NET_TCPPROBE is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_EXT=y
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+CONFIG_MTD_CFI_ADV_OPTIONS=y
-+CONFIG_MTD_CFI_NOSWAP=y
-+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI_GEOMETRY=y
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_IMPA7 is not set
-+# CONFIG_MTD_INTEL_VR_NOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_VERIFY_WRITE=y
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_CAFE is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+CONFIG_MTD_NAND_ORION=y
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
-+# CONFIG_BLK_DEV_RAM is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_PHANTOM is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+CONFIG_BLK_DEV_SR=m
-+# CONFIG_BLK_DEV_SR_VENDOR is not set
-+CONFIG_CHR_DEV_SG=m
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ADVANSYS is not set
-+# CONFIG_SCSI_ARCMSR is not set
-+# CONFIG_MEGARAID_NEWGEN is not set
-+# CONFIG_MEGARAID_LEGACY is not set
-+# CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_HPTIOP is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_IPS is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_MVSAS is not set
-+# CONFIG_SCSI_STEX is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_IPR is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_QLA_FC is not set
-+# CONFIG_SCSI_QLA_ISCSI is not set
-+# CONFIG_SCSI_LPFC is not set
-+# CONFIG_SCSI_DC395x is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_SRP is not set
-+CONFIG_ATA=y
-+# CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_SATA_PMP=y
-+# CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_SIL24 is not set
-+CONFIG_ATA_SFF=y
-+# CONFIG_SATA_SVW is not set
-+# CONFIG_ATA_PIIX is not set
-+CONFIG_SATA_MV=y
-+# CONFIG_SATA_NV is not set
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_PROMISE is not set
-+# CONFIG_SATA_SX4 is not set
-+# CONFIG_SATA_SIL is not set
-+# CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_ULI is not set
-+# CONFIG_SATA_VIA is not set
-+# CONFIG_SATA_VITESSE is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_PATA_ALI is not set
-+# CONFIG_PATA_AMD is not set
-+# CONFIG_PATA_ARTOP is not set
-+# CONFIG_PATA_ATIIXP is not set
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_CMD64X is not set
-+# CONFIG_PATA_CS5520 is not set
-+# CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CYPRESS is not set
-+# CONFIG_PATA_EFAR is not set
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_HPT366 is not set
-+# CONFIG_PATA_HPT37X is not set
-+# CONFIG_PATA_HPT3X2N is not set
-+# CONFIG_PATA_HPT3X3 is not set
-+# CONFIG_PATA_IT821X is not set
-+# CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_JMICRON is not set
-+# CONFIG_PATA_TRIFLEX is not set
-+# CONFIG_PATA_MARVELL is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_OLDPIIX is not set
-+# CONFIG_PATA_NETCELL is not set
-+# CONFIG_PATA_NINJA32 is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_NS87415 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC_OLD is not set
-+# CONFIG_PATA_RADISYS is not set
-+# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SERVERWORKS is not set
-+# CONFIG_PATA_PDC2027X is not set
-+# CONFIG_PATA_SIL680 is not set
-+# CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_VIA is not set
-+# CONFIG_PATA_WINBOND is not set
-+# CONFIG_PATA_PLATFORM is not set
-+# CONFIG_PATA_SCH is not set
-+# CONFIG_MD is not set
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+# CONFIG_FIREWIRE is not set
-+# CONFIG_IEEE1394 is not set
-+# CONFIG_I2O is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_ARCNET is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_AX88796 is not set
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_PCNET32 is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+# CONFIG_EEPRO100 is not set
-+# CONFIG_E100 is not set
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+# CONFIG_NE2K_PCI is not set
-+# CONFIG_8139CP is not set
-+# CONFIG_8139TOO is not set
-+# CONFIG_R6040 is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+CONFIG_NETDEV_1000=y
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_E1000E is not set
-+# CONFIG_E1000E_ENABLED is not set
-+# CONFIG_IP1000 is not set
-+# CONFIG_IGB is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+CONFIG_MV643XX_ETH=y
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+# CONFIG_NETDEV_10000 is not set
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+# CONFIG_INPUT_MOUSEDEV is not set
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+# CONFIG_VT is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_NOZOMI is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+# CONFIG_SERIAL_8250_PCI is not set
-+CONFIG_SERIAL_8250_NR_UARTS=4
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-+# CONFIG_SERIAL_8250_EXTENDED is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=16
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_DEVPORT=y
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+# CONFIG_I2C_ALI1535 is not set
-+# CONFIG_I2C_ALI1563 is not set
-+# CONFIG_I2C_ALI15X3 is not set
-+# CONFIG_I2C_AMD756 is not set
-+# CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_I801 is not set
-+# CONFIG_I2C_I810 is not set
-+# CONFIG_I2C_PIIX4 is not set
-+# CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_PROSAVAGE is not set
-+# CONFIG_I2C_SAVAGE4 is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_SIS5595 is not set
-+# CONFIG_I2C_SIS630 is not set
-+# CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-+# CONFIG_I2C_VIA is not set
-+# CONFIG_I2C_VIAPRO is not set
-+# CONFIG_I2C_VOODOO3 is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+CONFIG_I2C_MV64XXX=y
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+# CONFIG_SPI is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_AD7418 is not set
-+# CONFIG_SENSORS_ADM1021 is not set
-+# CONFIG_SENSORS_ADM1025 is not set
-+# CONFIG_SENSORS_ADM1026 is not set
-+# CONFIG_SENSORS_ADM1029 is not set
-+# CONFIG_SENSORS_ADM1031 is not set
-+# CONFIG_SENSORS_ADM9240 is not set
-+# CONFIG_SENSORS_ADT7470 is not set
-+# CONFIG_SENSORS_ADT7473 is not set
-+# CONFIG_SENSORS_ATXP1 is not set
-+# CONFIG_SENSORS_DS1621 is not set
-+# CONFIG_SENSORS_I5K_AMB is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_F71882FG is not set
-+# CONFIG_SENSORS_F75375S is not set
-+# CONFIG_SENSORS_GL518SM is not set
-+# CONFIG_SENSORS_GL520SM is not set
-+# CONFIG_SENSORS_IT87 is not set
-+# CONFIG_SENSORS_LM63 is not set
-+# CONFIG_SENSORS_LM75 is not set
-+# CONFIG_SENSORS_LM77 is not set
-+# CONFIG_SENSORS_LM78 is not set
-+# CONFIG_SENSORS_LM80 is not set
-+# CONFIG_SENSORS_LM83 is not set
-+# CONFIG_SENSORS_LM85 is not set
-+# CONFIG_SENSORS_LM87 is not set
-+# CONFIG_SENSORS_LM90 is not set
-+# CONFIG_SENSORS_LM92 is not set
-+# CONFIG_SENSORS_LM93 is not set
-+# CONFIG_SENSORS_MAX1619 is not set
-+# CONFIG_SENSORS_MAX6650 is not set
-+# CONFIG_SENSORS_PC87360 is not set
-+# CONFIG_SENSORS_PC87427 is not set
-+# CONFIG_SENSORS_SIS5595 is not set
-+# CONFIG_SENSORS_DME1737 is not set
-+# CONFIG_SENSORS_SMSC47M1 is not set
-+# CONFIG_SENSORS_SMSC47M192 is not set
-+# CONFIG_SENSORS_SMSC47B397 is not set
-+# CONFIG_SENSORS_ADS7828 is not set
-+# CONFIG_SENSORS_THMC50 is not set
-+# CONFIG_SENSORS_VIA686A is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+# CONFIG_SENSORS_VT8231 is not set
-+# CONFIG_SENSORS_W83781D is not set
-+# CONFIG_SENSORS_W83791D is not set
-+# CONFIG_SENSORS_W83792D is not set
-+# CONFIG_SENSORS_W83793 is not set
-+# CONFIG_SENSORS_W83L785TS is not set
-+# CONFIG_SENSORS_W83L786NG is not set
-+# CONFIG_SENSORS_W83627HF is not set
-+# CONFIG_SENSORS_W83627EHF is not set
-+# CONFIG_HWMON_DEBUG_CHIP is not set
-+# CONFIG_WATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_PASIC3 is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+# CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_ROOT_HUB_TT=y
-+CONFIG_USB_EHCI_TT_NEWSCHED=y
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_OHCI_HCD is not set
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+CONFIG_USB_PRINTER=y
-+# CONFIG_USB_WDM is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+CONFIG_USB_STORAGE_DATAFAB=y
-+CONFIG_USB_STORAGE_FREECOM=y
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+CONFIG_USB_STORAGE_DPCM=y
-+# CONFIG_USB_STORAGE_USBAT is not set
-+CONFIG_USB_STORAGE_SDDR09=y
-+CONFIG_USB_STORAGE_SDDR55=y
-+CONFIG_USB_STORAGE_JUMPSHOT=y
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_GADGET is not set
-+# CONFIG_MMC is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+CONFIG_RTC_DRV_DS1307=y
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+CONFIG_RTC_DRV_RS5C372=y
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+CONFIG_RTC_DRV_M41T80=y
-+# CONFIG_RTC_DRV_M41T80_WDT is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_UIO is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+CONFIG_ISO9660_FS=m
-+CONFIG_JOLIET=y
-+# CONFIG_ZISOFS is not set
-+CONFIG_UDF_FS=m
-+CONFIG_UDF_NLS=y
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_BSD_DISKLABEL=y
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+CONFIG_NLS_ISO8859_2=y
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+CONFIG_SCHEDSTATS=y
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+CONFIG_DEBUG_PREEMPT=y
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_LATENCYTOP is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_DEBUG_USER=y
-+CONFIG_DEBUG_ERRORS=y
-+# CONFIG_DEBUG_STACK_USAGE is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+# CONFIG_CRYPTO_MD5 is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+CONFIG_CRYPTO_HW=y
-+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
---- a/arch/arm/configs/orion5x_defconfig
-+++ b/arch/arm/configs/orion5x_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24
--# Thu Feb  7 14:10:30 2008
-+# Linux kernel version: 2.6.26-rc4
-+# Mon Jun  2 23:54:48 2008
- #
- CONFIG_ARM=y
- CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ARCH_SUPPORTS_AOUT=y
- CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-@@ -40,24 +41,24 @@ CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_USER_NS is not set
--# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
- CONFIG_LOG_BUF_SHIFT=14
- # CONFIG_CGROUPS is not set
--CONFIG_FAIR_GROUP_SCHED=y
--CONFIG_FAIR_USER_SCHED=y
--# CONFIG_FAIR_CGROUP_SCHED is not set
-+# CONFIG_GROUP_SCHED is not set
- CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
- # CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
- # CONFIG_BLK_DEV_INITRD is not set
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
- CONFIG_EMBEDDED=y
- CONFIG_UID16=y
- CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_SYSCTL_SYSCALL_CHECK=y
- CONFIG_KALLSYMS=y
-+CONFIG_KALLSYMS_ALL=y
- # CONFIG_KALLSYMS_EXTRA_PASS is not set
- CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
-@@ -73,20 +74,25 @@ CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
--CONFIG_SLAB=y
--# CONFIG_SLUB is not set
-+# CONFIG_SLUB_DEBUG is not set
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
- # CONFIG_SLOB is not set
--# CONFIG_PROFILING is not set
-+CONFIG_PROFILING=y
- # CONFIG_MARKERS is not set
-+CONFIG_OPROFILE=y
- CONFIG_HAVE_OPROFILE=y
--# CONFIG_KPROBES is not set
-+CONFIG_KPROBES=y
-+CONFIG_KRETPROBES=y
- CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+# CONFIG_HAVE_DMA_ATTRS is not set
- CONFIG_PROC_PAGE_MONITOR=y
--CONFIG_SLABINFO=y
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
- CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
- CONFIG_MODULE_UNLOAD=y
- # CONFIG_MODULE_FORCE_UNLOAD is not set
- # CONFIG_MODVERSIONS is not set
-@@ -111,7 +117,6 @@ CONFIG_DEFAULT_CFQ=y
- # CONFIG_DEFAULT_NOOP is not set
- CONFIG_DEFAULT_IOSCHED="cfq"
- CONFIG_CLASSIC_RCU=y
--# CONFIG_PREEMPT_RCU is not set
- 
- #
- # System Type
-@@ -160,6 +165,7 @@ CONFIG_MACH_RD88F5182=y
- CONFIG_MACH_KUROBOX_PRO=y
- CONFIG_MACH_DNS323=y
- CONFIG_MACH_TS209=y
-+CONFIG_MACH_LINKSTATION_PRO=y
- 
- #
- # Boot options
-@@ -168,6 +174,7 @@ CONFIG_MACH_TS209=y
- #
- # Power management
- #
-+CONFIG_PLAT_ORION=y
- 
- #
- # Processor Type
-@@ -177,8 +184,9 @@ CONFIG_CPU_FEROCEON=y
- CONFIG_CPU_FEROCEON_OLD_ID=y
- CONFIG_CPU_32v5=y
- CONFIG_CPU_ABRT_EV5T=y
-+CONFIG_CPU_PABRT_NOIFAR=y
- CONFIG_CPU_CACHE_VIVT=y
--CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_COPY_FEROCEON=y
- CONFIG_CPU_TLB_V4WBI=y
- CONFIG_CPU_CP15=y
- CONFIG_CPU_CP15_MMU=y
-@@ -189,7 +197,6 @@ CONFIG_CPU_CP15_MMU=y
- CONFIG_ARM_THUMB=y
- # CONFIG_CPU_ICACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_DISABLE is not set
--# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_OUTER_CACHE is not set
- 
- #
-@@ -199,6 +206,7 @@ CONFIG_PCI=y
- CONFIG_PCI_SYSCALL=y
- # CONFIG_ARCH_SUPPORTS_MSI is not set
- CONFIG_PCI_LEGACY=y
-+# CONFIG_PCI_DEBUG is not set
- # CONFIG_PCCARD is not set
- 
- #
-@@ -221,6 +229,7 @@ CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
- # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-+CONFIG_PAGEFLAGS_EXTENDED=y
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
-@@ -238,7 +247,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE=""
- # CONFIG_XIP_KERNEL is not set
- # CONFIG_KEXEC is not set
--# CONFIG_ATAGS_PROC is not set
- 
- #
- # Floating point emulation
-@@ -311,8 +319,6 @@ CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
- # CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
--# CONFIG_INET6_XFRM_TUNNEL is not set
--# CONFIG_INET6_TUNNEL is not set
- # CONFIG_NETWORK_SECMARK is not set
- # CONFIG_NETFILTER is not set
- # CONFIG_IP_DCCP is not set
-@@ -335,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # Network testing
- #
- CONFIG_NET_PKTGEN=m
-+# CONFIG_NET_TCPPROBE is not set
- # CONFIG_HAMRADIO is not set
- # CONFIG_CAN is not set
- # CONFIG_IRDA is not set
-@@ -362,6 +369,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
-@@ -371,6 +380,7 @@ CONFIG_MTD_PARTITIONS=y
- # CONFIG_MTD_REDBOOT_PARTS is not set
- CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
- 
- #
- # User Modules And Translation Layers
-@@ -378,9 +388,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
- CONFIG_MTD_CHAR=y
- CONFIG_MTD_BLKDEVS=y
- CONFIG_MTD_BLOCK=y
--CONFIG_FTL=y
--CONFIG_NFTL=y
--# CONFIG_NFTL_RW is not set
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
- # CONFIG_SSFDC is not set
-@@ -405,12 +414,12 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
- # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
- CONFIG_MTD_CFI_I1=y
- CONFIG_MTD_CFI_I2=y
--CONFIG_MTD_CFI_I4=y
-+# CONFIG_MTD_CFI_I4 is not set
- # CONFIG_MTD_CFI_I8 is not set
- # CONFIG_MTD_OTP is not set
- CONFIG_MTD_CFI_INTELEXT=y
- CONFIG_MTD_CFI_AMDSTD=y
--CONFIG_MTD_CFI_STAA=y
-+# CONFIG_MTD_CFI_STAA is not set
- CONFIG_MTD_CFI_UTIL=y
- # CONFIG_MTD_RAM is not set
- # CONFIG_MTD_ROM is not set
-@@ -481,6 +490,9 @@ CONFIG_MISC_DEVICES=y
- # CONFIG_EEPROM_93CX6 is not set
- # CONFIG_SGI_IOC4 is not set
- # CONFIG_TIFM_CORE is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
- 
- #
- # SCSI device support
-@@ -542,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_SCSI_IPS is not set
- # CONFIG_SCSI_INITIO is not set
- # CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_MVSAS is not set
- # CONFIG_SCSI_STEX is not set
- # CONFIG_SCSI_SYM53C8XX_2 is not set
- # CONFIG_SCSI_IPR is not set
-@@ -556,7 +569,10 @@ CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_SCSI_SRP is not set
- CONFIG_ATA=y
- # CONFIG_ATA_NONSTANDARD is not set
-+CONFIG_SATA_PMP=y
- # CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_SIL24 is not set
-+CONFIG_ATA_SFF=y
- # CONFIG_SATA_SVW is not set
- # CONFIG_ATA_PIIX is not set
- CONFIG_SATA_MV=y
-@@ -566,7 +582,6 @@ CONFIG_SATA_MV=y
- # CONFIG_SATA_PROMISE is not set
- # CONFIG_SATA_SX4 is not set
- # CONFIG_SATA_SIL is not set
--# CONFIG_SATA_SIL24 is not set
- # CONFIG_SATA_SIS is not set
- # CONFIG_SATA_ULI is not set
- # CONFIG_SATA_VIA is not set
-@@ -611,6 +626,7 @@ CONFIG_SATA_MV=y
- # CONFIG_PATA_VIA is not set
- # CONFIG_PATA_WINBOND is not set
- # CONFIG_PATA_PLATFORM is not set
-+# CONFIG_PATA_SCH is not set
- # CONFIG_MD is not set
- # CONFIG_FUSION is not set
- 
-@@ -652,7 +668,7 @@ CONFIG_NET_PCI=y
- # CONFIG_B44 is not set
- # CONFIG_FORCEDETH is not set
- # CONFIG_EEPRO100 is not set
--CONFIG_E100=y
-+# CONFIG_E100 is not set
- # CONFIG_FEALNX is not set
- # CONFIG_NATSEMI is not set
- # CONFIG_NE2K_PCI is not set
-@@ -668,9 +684,7 @@ CONFIG_E100=y
- CONFIG_NETDEV_1000=y
- # CONFIG_ACENIC is not set
- # CONFIG_DL2K is not set
--CONFIG_E1000=y
--CONFIG_E1000_NAPI=y
--# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-+# CONFIG_E1000 is not set
- # CONFIG_E1000E is not set
- # CONFIG_E1000E_ENABLED is not set
- # CONFIG_IP1000 is not set
-@@ -680,27 +694,15 @@ CONFIG_E1000_NAPI=y
- # CONFIG_YELLOWFIN is not set
- # CONFIG_R8169 is not set
- # CONFIG_SIS190 is not set
--CONFIG_SKGE=y
--CONFIG_SKY2=y
--# CONFIG_SK98LIN is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
- # CONFIG_VIA_VELOCITY is not set
--CONFIG_TIGON3=y
-+# CONFIG_TIGON3 is not set
- # CONFIG_BNX2 is not set
- CONFIG_MV643XX_ETH=y
- # CONFIG_QLA3XXX is not set
- # CONFIG_ATL1 is not set
--CONFIG_NETDEV_10000=y
--# CONFIG_CHELSIO_T1 is not set
--# CONFIG_CHELSIO_T3 is not set
--# CONFIG_IXGBE is not set
--# CONFIG_IXGB is not set
--# CONFIG_S2IO is not set
--# CONFIG_MYRI10GE is not set
--# CONFIG_NETXEN_NIC is not set
--# CONFIG_NIU is not set
--# CONFIG_MLX4_CORE is not set
--# CONFIG_TEHUTI is not set
--# CONFIG_BNX2X is not set
-+# CONFIG_NETDEV_10000 is not set
- # CONFIG_TR is not set
- 
- #
-@@ -708,6 +710,7 @@ CONFIG_NETDEV_10000=y
- #
- # CONFIG_WLAN_PRE80211 is not set
- # CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
- 
- #
- # USB Network Adapters
-@@ -738,12 +741,9 @@ CONFIG_INPUT=y
- #
- # Userland interfaces
- #
--CONFIG_INPUT_MOUSEDEV=y
--CONFIG_INPUT_MOUSEDEV_PSAUX=y
--CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
--CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_MOUSEDEV is not set
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_EVDEV is not set
-+CONFIG_INPUT_EVDEV=y
- # CONFIG_INPUT_EVBUG is not set
- 
- #
-@@ -765,10 +765,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- #
- # Character devices
- #
--CONFIG_VT=y
--CONFIG_VT_CONSOLE=y
--CONFIG_HW_CONSOLE=y
--# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_VT is not set
-+CONFIG_DEVKMEM=y
- # CONFIG_SERIAL_NONSTANDARD is not set
- # CONFIG_NOZOMI is not set
- 
-@@ -777,7 +775,7 @@ CONFIG_HW_CONSOLE=y
- #
- CONFIG_SERIAL_8250=y
- CONFIG_SERIAL_8250_CONSOLE=y
--CONFIG_SERIAL_8250_PCI=y
-+# CONFIG_SERIAL_8250_PCI is not set
- CONFIG_SERIAL_8250_NR_UARTS=4
- CONFIG_SERIAL_8250_RUNTIME_UARTS=2
- # CONFIG_SERIAL_8250_EXTENDED is not set
-@@ -792,7 +790,7 @@ CONFIG_UNIX98_PTYS=y
- CONFIG_LEGACY_PTYS=y
- CONFIG_LEGACY_PTY_COUNT=16
- # CONFIG_IPMI_HANDLER is not set
--CONFIG_HW_RANDOM=m
-+# CONFIG_HW_RANDOM is not set
- # CONFIG_NVRAM is not set
- # CONFIG_R3964 is not set
- # CONFIG_APPLICOM is not set
-@@ -804,13 +802,6 @@ CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=y
- 
- #
--# I2C Algorithms
--#
--# CONFIG_I2C_ALGOBIT is not set
--# CONFIG_I2C_ALGOPCF is not set
--# CONFIG_I2C_ALGOPCA is not set
--
--#
- # I2C Hardware Bus support
- #
- # CONFIG_I2C_ALI1535 is not set
-@@ -837,6 +828,7 @@ CONFIG_I2C_CHARDEV=y
- # CONFIG_I2C_VIA is not set
- # CONFIG_I2C_VIAPRO is not set
- # CONFIG_I2C_VOODOO3 is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
- CONFIG_I2C_MV64XXX=y
- 
- #
-@@ -847,19 +839,13 @@ CONFIG_I2C_MV64XXX=y
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_PCF8575 is not set
- # CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_TPS65010 is not set
- # CONFIG_SENSORS_MAX6875 is not set
- # CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
- # CONFIG_I2C_DEBUG_CHIP is not set
--
--#
--# SPI support
--#
- # CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
- # CONFIG_W1 is not set
- # CONFIG_POWER_SUPPLY is not set
- CONFIG_HWMON=y
-@@ -872,6 +858,7 @@ CONFIG_HWMON=y
- # CONFIG_SENSORS_ADM1031 is not set
- # CONFIG_SENSORS_ADM9240 is not set
- # CONFIG_SENSORS_ADT7470 is not set
-+# CONFIG_SENSORS_ADT7473 is not set
- # CONFIG_SENSORS_ATXP1 is not set
- # CONFIG_SENSORS_DS1621 is not set
- # CONFIG_SENSORS_I5K_AMB is not set
-@@ -901,6 +888,7 @@ CONFIG_HWMON=y
- # CONFIG_SENSORS_SMSC47M1 is not set
- # CONFIG_SENSORS_SMSC47M192 is not set
- # CONFIG_SENSORS_SMSC47B397 is not set
-+# CONFIG_SENSORS_ADS7828 is not set
- # CONFIG_SENSORS_THMC50 is not set
- # CONFIG_SENSORS_VIA686A is not set
- # CONFIG_SENSORS_VT1211 is not set
-@@ -910,6 +898,7 @@ CONFIG_HWMON=y
- # CONFIG_SENSORS_W83792D is not set
- # CONFIG_SENSORS_W83793 is not set
- # CONFIG_SENSORS_W83L785TS is not set
-+# CONFIG_SENSORS_W83L786NG is not set
- # CONFIG_SENSORS_W83627HF is not set
- # CONFIG_SENSORS_W83627EHF is not set
- # CONFIG_HWMON_DEBUG_CHIP is not set
-@@ -925,14 +914,24 @@ CONFIG_SSB_POSSIBLE=y
- # Multifunction device drivers
- #
- # CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_PASIC3 is not set
- 
- #
- # Multimedia devices
- #
-+
-+#
-+# Multimedia core support
-+#
- # CONFIG_VIDEO_DEV is not set
- # CONFIG_DVB_CORE is not set
--CONFIG_DAB=y
--# CONFIG_USB_DABUSB is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+# CONFIG_DAB is not set
- 
- #
- # Graphics support
-@@ -949,12 +948,6 @@ CONFIG_DAB=y
- # CONFIG_DISPLAY_SUPPORT is not set
- 
- #
--# Console display driver support
--#
--# CONFIG_VGA_CONSOLE is not set
--CONFIG_DUMMY_CONSOLE=y
--
--#
- # Sound
- #
- # CONFIG_SOUND is not set
-@@ -985,14 +978,18 @@ CONFIG_USB_DEVICEFS=y
- CONFIG_USB_DEVICE_CLASS=y
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
- 
- #
- # USB Host Controller Drivers
- #
-+# CONFIG_USB_C67X00_HCD is not set
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_EHCI_ROOT_HUB_TT=y
- CONFIG_USB_EHCI_TT_NEWSCHED=y
- # CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
- # CONFIG_USB_OHCI_HCD is not set
- # CONFIG_USB_UHCI_HCD is not set
- # CONFIG_USB_SL811_HCD is not set
-@@ -1003,6 +1000,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
- #
- # CONFIG_USB_ACM is not set
- CONFIG_USB_PRINTER=y
-+# CONFIG_USB_WDM is not set
- 
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -1022,7 +1020,9 @@ CONFIG_USB_STORAGE_SDDR09=y
- CONFIG_USB_STORAGE_SDDR55=y
- CONFIG_USB_STORAGE_JUMPSHOT=y
- # CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
- # CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
- # CONFIG_USB_LIBUSUAL is not set
- 
- #
-@@ -1060,6 +1060,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
- # CONFIG_USB_TRANCEVIBRATOR is not set
- # CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
- # CONFIG_USB_GADGET is not set
- # CONFIG_MMC is not set
- CONFIG_NEW_LEDS=y
-@@ -1076,6 +1077,7 @@ CONFIG_LEDS_CLASS=y
- CONFIG_LEDS_TRIGGERS=y
- CONFIG_LEDS_TRIGGER_TIMER=y
- CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
- CONFIG_RTC_LIB=y
- CONFIG_RTC_CLASS=y
- CONFIG_RTC_HCTOSYS=y
-@@ -1105,6 +1107,7 @@ CONFIG_RTC_DRV_RS5C372=y
- # CONFIG_RTC_DRV_PCF8583 is not set
- CONFIG_RTC_DRV_M41T80=y
- # CONFIG_RTC_DRV_M41T80_WDT is not set
-+# CONFIG_RTC_DRV_S35390A is not set
- 
- #
- # SPI RTC drivers
-@@ -1125,6 +1128,7 @@ CONFIG_RTC_DRV_M41T80=y
- #
- # on-CPU RTC drivers
- #
-+# CONFIG_UIO is not set
- 
- #
- # File systems
-@@ -1140,14 +1144,11 @@ CONFIG_JBD=y
- # CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
- # CONFIG_XFS_FS is not set
--# CONFIG_GFS2_FS is not set
- # CONFIG_OCFS2_FS is not set
--# CONFIG_MINIX_FS is not set
--# CONFIG_ROMFS_FS is not set
-+CONFIG_DNOTIFY=y
- CONFIG_INOTIFY=y
- CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
--CONFIG_DNOTIFY=y
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
- # CONFIG_FUSE_FS is not set
-@@ -1155,8 +1156,8 @@ CONFIG_DNOTIFY=y
- #
- # CD-ROM/DVD Filesystems
- #
--CONFIG_ISO9660_FS=y
--# CONFIG_JOLIET is not set
-+CONFIG_ISO9660_FS=m
-+CONFIG_JOLIET=y
- # CONFIG_ZISOFS is not set
- CONFIG_UDF_FS=m
- CONFIG_UDF_NLS=y
-@@ -1205,8 +1206,10 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- CONFIG_CRAMFS=y
- # CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
- # CONFIG_HPFS_FS is not set
- # CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
- CONFIG_NETWORK_FILESYSTEMS=y
-@@ -1214,7 +1217,6 @@ CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
- # CONFIG_NFS_V4 is not set
--# CONFIG_NFS_DIRECTIO is not set
- # CONFIG_NFSD is not set
- CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
-@@ -1241,14 +1243,13 @@ CONFIG_PARTITION_ADVANCED=y
- # CONFIG_MAC_PARTITION is not set
- CONFIG_MSDOS_PARTITION=y
- CONFIG_BSD_DISKLABEL=y
--CONFIG_MINIX_SUBPARTITION=y
--CONFIG_SOLARIS_X86_PARTITION=y
--CONFIG_UNIXWARE_DISKLABEL=y
--CONFIG_LDM_PARTITION=y
--CONFIG_LDM_DEBUG=y
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
- # CONFIG_SGI_PARTITION is not set
- # CONFIG_ULTRIX_PARTITION is not set
--CONFIG_SUN_PARTITION=y
-+# CONFIG_SUN_PARTITION is not set
- # CONFIG_KARMA_PARTITION is not set
- # CONFIG_EFI_PARTITION is not set
- # CONFIG_SYSV68_PARTITION is not set
-@@ -1300,15 +1301,48 @@ CONFIG_NLS_ISO8859_2=y
- # CONFIG_PRINTK_TIME is not set
- CONFIG_ENABLE_WARN_DEPRECATED=y
- CONFIG_ENABLE_MUST_CHECK=y
--# CONFIG_MAGIC_SYSRQ is not set
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
--# CONFIG_DEBUG_KERNEL is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
-+CONFIG_SCHEDSTATS=y
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+CONFIG_DEBUG_PREEMPT=y
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
- # CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_KPROBES_SANITY_TEST is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_LKDTM is not set
-+# CONFIG_FAULT_INJECTION is not set
- # CONFIG_SAMPLES is not set
- CONFIG_DEBUG_USER=y
-+CONFIG_DEBUG_ERRORS=y
-+# CONFIG_DEBUG_STACK_USAGE is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
- 
- #
- # Security options
-@@ -1317,50 +1351,79 @@ CONFIG_DEBUG_USER=y
- # CONFIG_SECURITY is not set
- # CONFIG_SECURITY_FILE_CAPABILITIES is not set
- CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
- CONFIG_CRYPTO_ALGAPI=m
- CONFIG_CRYPTO_BLKCIPHER=m
--# CONFIG_CRYPTO_SEQIV is not set
- CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=m
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
- # CONFIG_CRYPTO_HMAC is not set
- # CONFIG_CRYPTO_XCBC is not set
--# CONFIG_CRYPTO_NULL is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
- # CONFIG_CRYPTO_MD4 is not set
- # CONFIG_CRYPTO_MD5 is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
- # CONFIG_CRYPTO_SHA1 is not set
- # CONFIG_CRYPTO_SHA256 is not set
- # CONFIG_CRYPTO_SHA512 is not set
--# CONFIG_CRYPTO_WP512 is not set
- # CONFIG_CRYPTO_TGR192 is not set
--# CONFIG_CRYPTO_GF128MUL is not set
--CONFIG_CRYPTO_ECB=m
--CONFIG_CRYPTO_CBC=m
--CONFIG_CRYPTO_PCBC=m
--# CONFIG_CRYPTO_LRW is not set
--# CONFIG_CRYPTO_XTS is not set
--# CONFIG_CRYPTO_CTR is not set
--# CONFIG_CRYPTO_GCM is not set
--# CONFIG_CRYPTO_CCM is not set
--# CONFIG_CRYPTO_CRYPTD is not set
--# CONFIG_CRYPTO_DES is not set
--# CONFIG_CRYPTO_FCRYPT is not set
--# CONFIG_CRYPTO_BLOWFISH is not set
--# CONFIG_CRYPTO_TWOFISH is not set
--# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
- # CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_CAST5 is not set
- # CONFIG_CRYPTO_CAST6 is not set
--# CONFIG_CRYPTO_TEA is not set
--# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
- # CONFIG_CRYPTO_KHAZAD is not set
--# CONFIG_CRYPTO_ANUBIS is not set
--# CONFIG_CRYPTO_SEED is not set
- # CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
- # CONFIG_CRYPTO_DEFLATE is not set
--# CONFIG_CRYPTO_MICHAEL_MIC is not set
--# CONFIG_CRYPTO_CRC32C is not set
--# CONFIG_CRYPTO_CAMELLIA is not set
--# CONFIG_CRYPTO_TEST is not set
--# CONFIG_CRYPTO_AUTHENC is not set
- # CONFIG_CRYPTO_LZO is not set
- CONFIG_CRYPTO_HW=y
- # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-@@ -1369,12 +1432,14 @@ CONFIG_CRYPTO_HW=y
- # Library routines
- #
- CONFIG_BITREVERSE=y
--CONFIG_CRC_CCITT=y
--CONFIG_CRC16=y
--# CONFIG_CRC_ITU_T is not set
-+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC_ITU_T=m
- CONFIG_CRC32=y
- # CONFIG_CRC7 is not set
--CONFIG_LIBCRC32C=y
-+# CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
- CONFIG_PLIST=y
---- a/arch/arm/kernel/stacktrace.c
-+++ b/arch/arm/kernel/stacktrace.c
-@@ -36,6 +36,7 @@ EXPORT_SYMBOL(walk_stackframe);
- #ifdef CONFIG_STACKTRACE
- struct stack_trace_data {
- 	struct stack_trace *trace;
-+	unsigned int no_sched_functions;
- 	unsigned int skip;
- };
- 
-@@ -43,27 +44,52 @@ static int save_trace(struct stackframe 
- {
- 	struct stack_trace_data *data = d;
- 	struct stack_trace *trace = data->trace;
-+	unsigned long addr = frame->lr;
- 
-+	if (data->no_sched_functions && in_sched_functions(addr))
-+		return 0;
- 	if (data->skip) {
- 		data->skip--;
- 		return 0;
- 	}
- 
--	trace->entries[trace->nr_entries++] = frame->lr;
-+	trace->entries[trace->nr_entries++] = addr;
- 
- 	return trace->nr_entries >= trace->max_entries;
- }
- 
--void save_stack_trace(struct stack_trace *trace)
-+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
- {
- 	struct stack_trace_data data;
- 	unsigned long fp, base;
- 
- 	data.trace = trace;
- 	data.skip = trace->skip;
--	base = (unsigned long)task_stack_page(current);
--	asm("mov %0, fp" : "=r" (fp));
-+	base = (unsigned long)task_stack_page(tsk);
-+
-+	if (tsk != current) {
-+#ifdef CONFIG_SMP
-+		/*
-+		 * What guarantees do we have here that 'tsk'
-+		 * is not running on another CPU?
-+		 */
-+		BUG();
-+#else
-+		data.no_sched_functions = 1;
-+		fp = thread_saved_fp(tsk);
-+#endif
-+	} else {
-+		data.no_sched_functions = 0;
-+		asm("mov %0, fp" : "=r" (fp));
-+	}
- 
- 	walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
-+	if (trace->nr_entries < trace->max_entries)
-+		trace->entries[trace->nr_entries++] = ULONG_MAX;
-+}
-+
-+void save_stack_trace(struct stack_trace *trace)
-+{
-+	save_stack_trace_tsk(current, trace);
- }
- #endif
---- a/arch/arm/lib/copy_template.S
-+++ b/arch/arm/lib/copy_template.S
-@@ -13,14 +13,6 @@
-  */
- 
- /*
-- * This can be used to enable code to cacheline align the source pointer.
-- * Experiments on tested architectures (StrongARM and XScale) didn't show
-- * this a worthwhile thing to do.  That might be different in the future.
-- */
--//#define CALGN(code...)	code
--#define CALGN(code...)
--
--/*
-  * Theory of operation
-  * -------------------
-  *
-@@ -82,7 +74,7 @@
- 		stmfd	sp!, {r5 - r8}
- 		blt	5f
- 
--	CALGN(	ands	ip, r1, #31		)
-+	CALGN(	ands	ip, r0, #31		)
- 	CALGN(	rsb	r3, ip, #32		)
- 	CALGN(	sbcnes	r4, r3, r2		)  @ C is always set here
- 	CALGN(	bcs	2f			)
-@@ -168,7 +160,7 @@
- 		subs	r2, r2, #28
- 		blt	14f
- 
--	CALGN(	ands	ip, r1, #31		)
-+	CALGN(	ands	ip, r0, #31		)
- 	CALGN(	rsb	ip, ip, #32		)
- 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
- 	CALGN(	subcc	r2, r2, ip		)
---- a/arch/arm/lib/memmove.S
-+++ b/arch/arm/lib/memmove.S
-@@ -13,14 +13,6 @@
- #include <linux/linkage.h>
- #include <asm/assembler.h>
- 
--/*
-- * This can be used to enable code to cacheline align the source pointer.
-- * Experiments on tested architectures (StrongARM and XScale) didn't show
-- * this a worthwhile thing to do.  That might be different in the future.
-- */
--//#define CALGN(code...)        code
--#define CALGN(code...)
--
- 		.text
- 
- /*
-@@ -55,11 +47,12 @@ ENTRY(memmove)
- 		stmfd	sp!, {r5 - r8}
- 		blt	5f
- 
--	CALGN(	ands	ip, r1, #31		)
-+	CALGN(	ands	ip, r0, #31		)
- 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
- 	CALGN(	bcs	2f			)
- 	CALGN(	adr	r4, 6f			)
- 	CALGN(	subs	r2, r2, ip		)  @ C is set here
-+	CALGN(	rsb	ip, ip, #32		)
- 	CALGN(	add	pc, r4, ip		)
- 
- 	PLD(	pld	[r1, #-4]		)
-@@ -138,8 +131,7 @@ ENTRY(memmove)
- 		subs	r2, r2, #28
- 		blt	14f
- 
--	CALGN(	ands	ip, r1, #31		)
--	CALGN(	rsb	ip, ip, #32		)
-+	CALGN(	ands	ip, r0, #31		)
- 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
- 	CALGN(	subcc	r2, r2, ip		)
- 	CALGN(	bcc	15f			)
---- a/arch/arm/lib/memset.S
-+++ b/arch/arm/lib/memset.S
-@@ -39,6 +39,9 @@ ENTRY(memset)
- 	mov	r3, r1
- 	cmp	r2, #16
- 	blt	4f
-+
-+#if ! CALGN(1)+0
-+
- /*
-  * We need an extra register for this loop - save the return address and
-  * use the LR
-@@ -64,6 +67,49 @@ ENTRY(memset)
- 	stmneia	r0!, {r1, r3, ip, lr}
- 	ldr	lr, [sp], #4
- 
-+#else
-+
-+/*
-+ * This version aligns the destination pointer in order to write
-+ * whole cache lines at once.
-+ */
-+
-+	stmfd	sp!, {r4-r7, lr}
-+	mov	r4, r1
-+	mov	r5, r1
-+	mov	r6, r1
-+	mov	r7, r1
-+	mov	ip, r1
-+	mov	lr, r1
-+
-+	cmp	r2, #96
-+	tstgt	r0, #31
-+	ble	3f
-+
-+	and	ip, r0, #31
-+	rsb	ip, ip, #32
-+	sub	r2, r2, ip
-+	movs	ip, ip, lsl #(32 - 4)
-+	stmcsia	r0!, {r4, r5, r6, r7}
-+	stmmiia	r0!, {r4, r5}
-+	tst	ip, #(1 << 30)
-+	mov	ip, r1
-+	strne	r1, [r0], #4
-+
-+3:	subs	r2, r2, #64
-+	stmgeia	r0!, {r1, r3-r7, ip, lr}
-+	stmgeia	r0!, {r1, r3-r7, ip, lr}
-+	bgt	3b
-+	ldmeqfd	sp!, {r4-r7, pc}
-+
-+	tst	r2, #32
-+	stmneia	r0!, {r1, r3-r7, ip, lr}
-+	tst	r2, #16
-+	stmneia	r0!, {r4-r7}
-+	ldmfd	sp!, {r4-r7, lr}
-+
-+#endif
-+
- 4:	tst	r2, #8
- 	stmneia	r0!, {r1, r3}
- 	tst	r2, #4
---- a/arch/arm/lib/memzero.S
-+++ b/arch/arm/lib/memzero.S
-@@ -39,6 +39,9 @@ ENTRY(__memzero)
-  */
- 	cmp	r1, #16			@ 1 we can skip this chunk if we
- 	blt	4f			@ 1 have < 16 bytes
-+
-+#if ! CALGN(1)+0
-+
- /*
-  * We need an extra register for this loop - save the return address and
-  * use the LR
-@@ -64,6 +67,47 @@ ENTRY(__memzero)
- 	stmneia	r0!, {r2, r3, ip, lr}	@ 4
- 	ldr	lr, [sp], #4		@ 1
- 
-+#else
-+
-+/*
-+ * This version aligns the destination pointer in order to write
-+ * whole cache lines at once.
-+ */
-+
-+	stmfd	sp!, {r4-r7, lr}
-+	mov	r4, r2
-+	mov	r5, r2
-+	mov	r6, r2
-+	mov	r7, r2
-+	mov	ip, r2
-+	mov	lr, r2
-+
-+	cmp	r1, #96
-+	andgts	ip, r0, #31
-+	ble	3f
-+
-+	rsb	ip, ip, #32
-+	sub	r1, r1, ip
-+	movs	ip, ip, lsl #(32 - 4)
-+	stmcsia	r0!, {r4, r5, r6, r7}
-+	stmmiia	r0!, {r4, r5}
-+	movs	ip, ip, lsl #2
-+	strcs	r2, [r0], #4
-+
-+3:	subs	r1, r1, #64
-+	stmgeia	r0!, {r2-r7, ip, lr}
-+	stmgeia	r0!, {r2-r7, ip, lr}
-+	bgt	3b
-+	ldmeqfd	sp!, {r4-r7, pc}
-+
-+	tst	r1, #32
-+	stmneia	r0!, {r2-r7, ip, lr}
-+	tst	r1, #16
-+	stmneia	r0!, {r4-r7}
-+	ldmfd	sp!, {r4-r7, lr}
-+
-+#endif
-+
- 4:	tst	r1, #8			@ 1 8 bytes or more?
- 	stmneia	r0!, {r2, r3}		@ 2
- 	tst	r1, #4			@ 1 4 bytes or more?
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -0,0 +1,25 @@
-+if ARCH_KIRKWOOD
-+
-+menu "Marvell Kirkwood Implementations"
-+
-+config MACH_DB88F6281_BP
-+	bool "Marvell DB-88F6281-BP Development Board"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Marvell DB-88F6281-BP Development Board.
-+
-+config MACH_RD88F6192_NAS
-+	bool "Marvell RD-88F6192-NAS Reference Board"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Marvell RD-88F6192-NAS Reference Board.
-+
-+config MACH_RD88F6281
-+	bool "Marvell RD-88F6281 Reference Board"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Marvell RD-88F6281 Reference Board.
-+
-+endmenu
-+
-+endif
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -0,0 +1,5 @@
-+obj-y				+= common.o addr-map.o irq.o pcie.o
-+
-+obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
-+obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
-+obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6281-setup.o
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/Makefile.boot
-@@ -0,0 +1,3 @@
-+   zreladdr-y	:= 0x00008000
-+params_phys-y	:= 0x00000100
-+initrd_phys-y	:= 0x00800000
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/addr-map.c
-@@ -0,0 +1,139 @@
-+/*
-+ * arch/arm/mach-kirkwood/addr-map.c
-+ *
-+ * Address map functions for Marvell Kirkwood SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mbus.h>
-+#include <linux/io.h>
-+#include <asm/hardware.h>
-+#include "common.h"
-+
-+/*
-+ * Generic Address Decode Windows bit settings
-+ */
-+#define TARGET_DDR		0
-+#define TARGET_DEV_BUS		1
-+#define TARGET_PCIE		4
-+#define ATTR_DEV_SPI_ROM	0x1e
-+#define ATTR_DEV_BOOT		0x1d
-+#define ATTR_DEV_NAND		0x2f
-+#define ATTR_DEV_CS3		0x37
-+#define ATTR_DEV_CS2		0x3b
-+#define ATTR_DEV_CS1		0x3d
-+#define ATTR_DEV_CS0		0x3e
-+#define ATTR_PCIE_IO		0xe0
-+#define ATTR_PCIE_MEM		0xe8
-+
-+/*
-+ * Helpers to get DDR bank info
-+ */
-+#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
-+#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
-+
-+/*
-+ * CPU Address Decode Windows registers
-+ */
-+#define WIN_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-+#define WIN_CTRL_OFF		0x0000
-+#define WIN_BASE_OFF		0x0004
-+#define WIN_REMAP_LO_OFF	0x0008
-+#define WIN_REMAP_HI_OFF	0x000c
-+
-+
-+struct mbus_dram_target_info kirkwood_mbus_dram_info;
-+
-+static int __init cpu_win_can_remap(int win)
-+{
-+	if (win < 4)
-+		return 1;
-+
-+	return 0;
-+}
-+
-+static void __init setup_cpu_win(int win, u32 base, u32 size,
-+				 u8 target, u8 attr, int remap)
-+{
-+	void __iomem *addr = (void __iomem *)WIN_OFF(win);
-+	u32 ctrl;
-+
-+	base &= 0xffff0000;
-+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-+
-+	writel(base, addr + WIN_BASE_OFF);
-+	writel(ctrl, addr + WIN_CTRL_OFF);
-+	if (cpu_win_can_remap(win)) {
-+		if (remap < 0)
-+			remap = base;
-+
-+		writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
-+		writel(0, addr + WIN_REMAP_HI_OFF);
-+	}
-+}
-+
-+void __init kirkwood_setup_cpu_mbus(void)
-+{
-+	void __iomem *addr;
-+	int i;
-+	int cs;
-+
-+	/*
-+	 * First, disable and clear windows.
-+	 */
-+	for (i = 0; i < 8; i++) {
-+		addr = (void __iomem *)WIN_OFF(i);
-+
-+		writel(0, addr + WIN_BASE_OFF);
-+		writel(0, addr + WIN_CTRL_OFF);
-+		if (cpu_win_can_remap(i)) {
-+			writel(0, addr + WIN_REMAP_LO_OFF);
-+			writel(0, addr + WIN_REMAP_HI_OFF);
-+		}
-+	}
-+
-+	/*
-+	 * Setup windows for PCIe IO+MEM space.
-+	 */
-+	setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
-+		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
-+	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-+		      TARGET_PCIE, ATTR_PCIE_MEM, -1);
-+
-+	/*
-+	 * Setup window for NAND controller.
-+	 */
-+	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
-+		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
-+
-+	/*
-+	 * Setup MBUS dram target info.
-+	 */
-+	kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-+
-+	addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
-+
-+	for (i = 0, cs = 0; i < 4; i++) {
-+		u32 base = readl(addr + DDR_BASE_CS_OFF(i));
-+		u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
-+
-+		/*
-+		 * Chip select enabled?
-+		 */
-+		if (size & 1) {
-+			struct mbus_dram_window *w;
-+
-+			w = &kirkwood_mbus_dram_info.cs[cs++];
-+			w->cs_index = i;
-+			w->mbus_attr = 0xf & ~(1 << i);
-+			w->base = base & 0xffff0000;
-+			w->size = (size | 0x0000ffff) + 1;
-+		}
-+	}
-+	kirkwood_mbus_dram_info.num_cs = cs;
-+}
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/common.c
-@@ -0,0 +1,326 @@
-+/*
-+ * arch/arm/mach-kirkwood/common.c
-+ *
-+ * Core functions for Marvell Kirkwood SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mbus.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/ata_platform.h>
-+#include <asm/page.h>
-+#include <asm/timex.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/time.h>
-+#include <asm/arch/kirkwood.h>
-+#include <asm/plat-orion/cache-feroceon-l2.h>
-+#include <asm/plat-orion/ehci-orion.h>
-+#include <asm/plat-orion/orion_nand.h>
-+#include <asm/plat-orion/time.h>
-+#include "common.h"
-+
-+/*****************************************************************************
-+ * I/O Address Mapping
-+ ****************************************************************************/
-+static struct map_desc kirkwood_io_desc[] __initdata = {
-+	{
-+		.virtual	= KIRKWOOD_PCIE_IO_VIRT_BASE,
-+		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
-+		.length		= KIRKWOOD_PCIE_IO_SIZE,
-+		.type		= MT_DEVICE,
-+	}, {
-+		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
-+		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
-+		.length		= KIRKWOOD_REGS_SIZE,
-+		.type		= MT_DEVICE,
-+	},
-+};
-+
-+void __init kirkwood_map_io(void)
-+{
-+	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-+}
-+
-+
-+/*****************************************************************************
-+ * EHCI
-+ ****************************************************************************/
-+static struct orion_ehci_data kirkwood_ehci_data = {
-+	.dram		= &kirkwood_mbus_dram_info,
-+};
-+
-+static u64 ehci_dmamask = 0xffffffffUL;
-+
-+
-+/*****************************************************************************
-+ * EHCI0
-+ ****************************************************************************/
-+static struct resource kirkwood_ehci_resources[] = {
-+	{
-+		.start	= USB_PHYS_BASE,
-+		.end	= USB_PHYS_BASE + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.start	= IRQ_KIRKWOOD_USB,
-+		.end	= IRQ_KIRKWOOD_USB,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device kirkwood_ehci = {
-+	.name		= "orion-ehci",
-+	.id		= 0,
-+	.dev		= {
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+		.platform_data		= &kirkwood_ehci_data,
-+	},
-+	.resource	= kirkwood_ehci_resources,
-+	.num_resources	= ARRAY_SIZE(kirkwood_ehci_resources),
-+};
-+
-+void __init kirkwood_ehci_init(void)
-+{
-+	platform_device_register(&kirkwood_ehci);
-+}
-+
-+
-+/*****************************************************************************
-+ * GE00
-+ ****************************************************************************/
-+struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
-+	.t_clk		= KIRKWOOD_TCLK,
-+	.dram		= &kirkwood_mbus_dram_info,
-+};
-+
-+static struct resource kirkwood_ge00_shared_resources[] = {
-+	{
-+		.name	= "ge00 base",
-+		.start	= GE00_PHYS_BASE + 0x2000,
-+		.end	= GE00_PHYS_BASE + 0x3fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device kirkwood_ge00_shared = {
-+	.name		= MV643XX_ETH_SHARED_NAME,
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &kirkwood_ge00_shared_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= kirkwood_ge00_shared_resources,
-+};
-+
-+static struct resource kirkwood_ge00_resources[] = {
-+	{
-+		.name	= "ge00 irq",
-+		.start	= IRQ_KIRKWOOD_GE00_SUM,
-+		.end	= IRQ_KIRKWOOD_GE00_SUM,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device kirkwood_ge00 = {
-+	.name		= MV643XX_ETH_NAME,
-+	.id		= 0,
-+	.num_resources	= 1,
-+	.resource	= kirkwood_ge00_resources,
-+};
-+
-+void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-+{
-+	eth_data->shared = &kirkwood_ge00_shared;
-+	kirkwood_ge00.dev.platform_data = eth_data;
-+
-+	platform_device_register(&kirkwood_ge00_shared);
-+	platform_device_register(&kirkwood_ge00);
-+}
-+
-+
-+/*****************************************************************************
-+ * SoC RTC
-+ ****************************************************************************/
-+static struct resource kirkwood_rtc_resource = {
-+	.start	= RTC_PHYS_BASE,
-+	.end	= RTC_PHYS_BASE + SZ_16 - 1,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+void __init kirkwood_rtc_init(void)
-+{
-+	platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
-+}
-+
-+
-+/*****************************************************************************
-+ * SATA
-+ ****************************************************************************/
-+static struct resource kirkwood_sata_resources[] = {
-+	{
-+		.name	= "sata base",
-+		.start	= SATA_PHYS_BASE,
-+		.end	= SATA_PHYS_BASE + 0x5000 - 1,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.name	= "sata irq",
-+		.start	= IRQ_KIRKWOOD_SATA,
-+		.end	= IRQ_KIRKWOOD_SATA,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device kirkwood_sata = {
-+	.name		= "sata_mv",
-+	.id		= 0,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+	.num_resources	= ARRAY_SIZE(kirkwood_sata_resources),
-+	.resource	= kirkwood_sata_resources,
-+};
-+
-+void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
-+{
-+	sata_data->dram = &kirkwood_mbus_dram_info;
-+	kirkwood_sata.dev.platform_data = sata_data;
-+	platform_device_register(&kirkwood_sata);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART0
-+ ****************************************************************************/
-+static struct plat_serial8250_port kirkwood_uart0_data[] = {
-+	{
-+		.mapbase	= UART0_PHYS_BASE,
-+		.membase	= (char *)UART0_VIRT_BASE,
-+		.irq		= IRQ_KIRKWOOD_UART_0,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= KIRKWOOD_TCLK,
-+	}, {
-+	},
-+};
-+
-+static struct resource kirkwood_uart0_resources[] = {
-+	{
-+		.start		= UART0_PHYS_BASE,
-+		.end		= UART0_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_KIRKWOOD_UART_0,
-+		.end		= IRQ_KIRKWOOD_UART_0,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device kirkwood_uart0 = {
-+	.name			= "serial8250",
-+	.id			= 0,
-+	.dev			= {
-+		.platform_data	= kirkwood_uart0_data,
-+	},
-+	.resource		= kirkwood_uart0_resources,
-+	.num_resources		= ARRAY_SIZE(kirkwood_uart0_resources),
-+};
-+
-+void __init kirkwood_uart0_init(void)
-+{
-+	platform_device_register(&kirkwood_uart0);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART1
-+ ****************************************************************************/
-+static struct plat_serial8250_port kirkwood_uart1_data[] = {
-+	{
-+		.mapbase	= UART1_PHYS_BASE,
-+		.membase	= (char *)UART1_VIRT_BASE,
-+		.irq		= IRQ_KIRKWOOD_UART_1,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= KIRKWOOD_TCLK,
-+	}, {
-+	},
-+};
-+
-+static struct resource kirkwood_uart1_resources[] = {
-+	{
-+		.start		= UART1_PHYS_BASE,
-+		.end		= UART1_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_KIRKWOOD_UART_1,
-+		.end		= IRQ_KIRKWOOD_UART_1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device kirkwood_uart1 = {
-+	.name			= "serial8250",
-+	.id			= 1,
-+	.dev			= {
-+		.platform_data	= kirkwood_uart1_data,
-+	},
-+	.resource		= kirkwood_uart1_resources,
-+	.num_resources		= ARRAY_SIZE(kirkwood_uart1_resources),
-+};
-+
-+void __init kirkwood_uart1_init(void)
-+{
-+	platform_device_register(&kirkwood_uart1);
-+}
-+
-+
-+/*****************************************************************************
-+ * Time handling
-+ ****************************************************************************/
-+static void kirkwood_timer_init(void)
-+{
-+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, KIRKWOOD_TCLK);
-+}
-+
-+struct sys_timer kirkwood_timer = {
-+	.init = kirkwood_timer_init,
-+};
-+
-+
-+/*****************************************************************************
-+ * General
-+ ****************************************************************************/
-+static char * __init kirkwood_id(void)
-+{
-+	switch (readl(DEVICE_ID) & 0x3) {
-+	case 0:
-+		return "88F6180";
-+	case 1:
-+		return "88F6192";
-+	case 2:
-+		return "88F6281";
-+	}
-+
-+	return "unknown 88F6000 variant";
-+}
-+
-+void __init kirkwood_init(void)
-+{
-+	printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
-+		kirkwood_id(), KIRKWOOD_TCLK);
-+
-+	kirkwood_setup_cpu_mbus();
-+
-+#ifdef CONFIG_CACHE_FEROCEON_L2
-+	feroceon_l2_init(1);
-+#endif
-+}
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/common.h
-@@ -0,0 +1,42 @@
-+/*
-+ * arch/arm/mach-kirkwood/common.h
-+ *
-+ * Core functions for Marvell Kirkwood SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ARCH_KIRKWOOD_COMMON_H
-+#define __ARCH_KIRKWOOD_COMMON_H
-+
-+struct mv643xx_eth_platform_data;
-+struct mv_sata_platform_data;
-+
-+/*
-+ * Basic Kirkwood init functions used early by machine-setup.
-+ */
-+void kirkwood_map_io(void);
-+void kirkwood_init(void);
-+void kirkwood_init_irq(void);
-+
-+extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
-+void kirkwood_setup_cpu_mbus(void);
-+void kirkwood_setup_pcie_io_win(int window, u32 base, u32 size,
-+				int maj, int min);
-+void kirkwood_setup_pcie_mem_win(int window, u32 base, u32 size,
-+				 int maj, int min);
-+
-+void kirkwood_ehci_init(void);
-+void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-+void kirkwood_pcie_init(void);
-+void kirkwood_rtc_init(void);
-+void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
-+void kirkwood_uart0_init(void);
-+void kirkwood_uart1_init(void);
-+
-+extern struct sys_timer kirkwood_timer;
-+
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
-+ *
-+ * Marvell DB-88F6281-BP Development Board Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/timer.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include <asm/arch/kirkwood.h>
-+#include "common.h"
-+
-+static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
-+	.phy_addr	= 8,
-+};
-+
-+static struct mv_sata_platform_data db88f6281_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+static void __init db88f6281_init(void)
-+{
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	kirkwood_init();
-+
-+	kirkwood_ehci_init();
-+	kirkwood_ge00_init(&db88f6281_ge00_data);
-+	kirkwood_rtc_init();
-+	kirkwood_sata_init(&db88f6281_sata_data);
-+	kirkwood_uart0_init();
-+	kirkwood_uart1_init();
-+}
-+
-+static int __init db88f6281_pci_init(void)
-+{
-+	if (machine_is_db88f6281_bp())
-+		kirkwood_pcie_init();
-+
-+	return 0;
-+}
-+subsys_initcall(db88f6281_pci_init);
-+
-+MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
-+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= db88f6281_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/irq.c
-@@ -0,0 +1,22 @@
-+/*
-+ * arch/arm/mach-kirkwood/irq.c
-+ *
-+ * Kirkwood IRQ handling.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/io.h>
-+#include <asm/plat-orion/irq.h>
-+#include "common.h"
-+
-+void __init kirkwood_init_irq(void)
-+{
-+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-+}
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/pcie.c
-@@ -0,0 +1,180 @@
-+/*
-+ * arch/arm/mach-kirkwood/pcie.c
-+ *
-+ * PCIe functions for Marvell Kirkwood SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/mbus.h>
-+#include <asm/mach/pci.h>
-+#include <asm/plat-orion/pcie.h>
-+#include "common.h"
-+
-+
-+#define PCIE_BASE	((void __iomem *)PCIE_VIRT_BASE)
-+
-+static int pcie_valid_config(int bus, int dev)
-+{
-+	/*
-+	 * Don't go out when trying to access --
-+	 * 1. nonexisting device on local bus
-+	 * 2. where there's no device connected (no link)
-+	 */
-+	if (bus == 0 && dev == 0)
-+		return 1;
-+
-+	if (!orion_pcie_link_up(PCIE_BASE))
-+		return 0;
-+
-+	if (bus == 0 && dev != 1)
-+		return 0;
-+
-+	return 1;
-+}
-+
-+
-+/*
-+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
-+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
-+ * transactions are atomic.
-+ */
-+static DEFINE_SPINLOCK(kirkwood_pcie_lock);
-+
-+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-+			int size, u32 *val)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
-+		*val = 0xffffffff;
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+	}
-+
-+	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-+	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
-+	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
-+
-+	return ret;
-+}
-+
-+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-+			int where, int size, u32 val)
-+{
-+	unsigned long flags;
-+	int ret;
-+
-+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-+	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
-+	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
-+
-+	return ret;
-+}
-+
-+static struct pci_ops pcie_ops = {
-+	.read = pcie_rd_conf,
-+	.write = pcie_wr_conf,
-+};
-+
-+
-+static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
-+{
-+	struct resource *res;
-+
-+	/*
-+	 * Generic PCIe unit setup.
-+	 */
-+	orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
-+
-+	/*
-+	 * Request resources.
-+	 */
-+	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-+	if (!res)
-+		panic("pcie_setup unable to alloc resources");
-+
-+	/*
-+	 * IORESOURCE_IO
-+	 */
-+	res[0].name = "PCIe I/O Space";
-+	res[0].flags = IORESOURCE_IO;
-+	res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
-+	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
-+	if (request_resource(&ioport_resource, &res[0]))
-+		panic("Request PCIe IO resource failed\n");
-+	sys->resource[0] = &res[0];
-+
-+	/*
-+	 * IORESOURCE_MEM
-+	 */
-+	res[1].name = "PCIe Memory Space";
-+	res[1].flags = IORESOURCE_MEM;
-+	res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-+	res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
-+	if (request_resource(&iomem_resource, &res[1]))
-+		panic("Request PCIe Memory resource failed\n");
-+	sys->resource[1] = &res[1];
-+
-+	sys->resource[2] = NULL;
-+	sys->io_offset = 0;
-+
-+	return 1;
-+}
-+
-+static void __devinit rc_pci_fixup(struct pci_dev *dev)
-+{
-+	/*
-+	 * Prevent enumeration of root complex.
-+	 */
-+	if (dev->bus->parent == NULL && dev->devfn == 0) {
-+		int i;
-+
-+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-+			dev->resource[i].start = 0;
-+			dev->resource[i].end   = 0;
-+			dev->resource[i].flags = 0;
-+		}
-+	}
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-+
-+static struct pci_bus __init *
-+kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-+{
-+	struct pci_bus *bus;
-+
-+	if (nr == 0) {
-+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
-+	} else {
-+		bus = NULL;
-+		BUG();
-+	}
-+
-+	return bus;
-+}
-+
-+static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	return IRQ_KIRKWOOD_PCIE;
-+}
-+
-+static struct hw_pci kirkwood_pci __initdata = {
-+	.nr_controllers	= 1,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= kirkwood_pcie_setup,
-+	.scan		= kirkwood_pcie_scan_bus,
-+	.map_irq	= kirkwood_pcie_map_irq,
-+};
-+
-+void __init kirkwood_pcie_init(void)
-+{
-+	pci_common_init(&kirkwood_pci);
-+}
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
-+ *
-+ * Marvell RD-88F6192-NAS Reference Board Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/timer.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include <asm/arch/kirkwood.h>
-+#include "common.h"
-+
-+#define RD88F6192_GPIO_USB_VBUS		10
-+
-+static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
-+	.phy_addr	= 8,
-+};
-+
-+static struct mv_sata_platform_data rd88f6192_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+static void __init rd88f6192_init(void)
-+{
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	kirkwood_init();
-+
-+	kirkwood_ehci_init();
-+	kirkwood_ge00_init(&rd88f6192_ge00_data);
-+	kirkwood_rtc_init();
-+	kirkwood_sata_init(&rd88f6192_sata_data);
-+	kirkwood_uart0_init();
-+}
-+
-+static int __init rd88f6192_pci_init(void)
-+{
-+	if (machine_is_rd88f6192_nas())
-+		kirkwood_pcie_init();
-+
-+	return 0;
-+}
-+subsys_initcall(rd88f6192_pci_init);
-+
-+MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
-+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= rd88f6192_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
-@@ -0,0 +1,112 @@
-+/*
-+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
-+ *
-+ * Marvell RD-88F6281 Reference Board Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/timer.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include <asm/arch/kirkwood.h>
-+#include <asm/plat-orion/orion_nand.h>
-+#include "common.h"
-+
-+static struct mtd_partition rd88f6281_nand_parts[] = {
-+	{
-+		.name = "u-boot",
-+		.offset = 0,
-+		.size = SZ_1M
-+	}, {
-+		.name = "uImage",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_2M
-+	}, {
-+		.name = "root",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = MTDPART_SIZ_FULL
-+	},
-+};
-+
-+static struct resource rd88f6281_nand_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-+			  KIRKWOOD_NAND_MEM_SIZE - 1,
-+};
-+
-+static struct orion_nand_data rd88f6281_nand_data = {
-+	.parts		= rd88f6281_nand_parts,
-+	.nr_parts	= ARRAY_SIZE(rd88f6281_nand_parts),
-+	.cle		= 0,
-+	.ale		= 1,
-+	.width		= 8,
-+};
-+
-+static struct platform_device rd88f6281_nand_flash = {
-+	.name		= "orion_nand",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data	= &rd88f6281_nand_data,
-+	},
-+	.resource	= &rd88f6281_nand_resource,
-+	.num_resources	= 1,
-+};
-+
-+static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
-+	.phy_addr	= -1,
-+};
-+
-+static struct mv_sata_platform_data rd88f6281_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+static void __init rd88f6281_init(void)
-+{
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	kirkwood_init();
-+
-+	kirkwood_ehci_init();
-+	kirkwood_ge00_init(&rd88f6281_ge00_data);
-+	kirkwood_rtc_init();
-+	kirkwood_sata_init(&rd88f6281_sata_data);
-+	kirkwood_uart0_init();
-+	kirkwood_uart1_init();
-+
-+	platform_device_register(&rd88f6281_nand_flash);
-+}
-+
-+static int __init rd88f6281_pci_init(void)
-+{
-+	if (machine_is_rd88f6281())
-+		kirkwood_pcie_init();
-+
-+	return 0;
-+}
-+subsys_initcall(rd88f6281_pci_init);
-+
-+MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
-+	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= rd88f6281_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-loki/Kconfig
-@@ -0,0 +1,13 @@
-+if ARCH_LOKI
-+
-+menu "Marvell Loki (88RC8480) Implementations"
-+
-+config MACH_LB88RC8480
-+	bool "Marvell LB88RC8480 Development Board"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Marvell LB88RC8480 Development Board.
-+
-+endmenu
-+
-+endif
---- /dev/null
-+++ b/arch/arm/mach-loki/Makefile
-@@ -0,0 +1,3 @@
-+obj-y				+= common.o addr-map.o irq.o
-+
-+obj-$(CONFIG_MACH_LB88RC8480)	+= lb88rc8480-setup.o
---- /dev/null
-+++ b/arch/arm/mach-loki/Makefile.boot
-@@ -0,0 +1,3 @@
-+   zreladdr-y	:= 0x00008000
-+params_phys-y	:= 0x00000100
-+initrd_phys-y	:= 0x00800000
---- /dev/null
-+++ b/arch/arm/mach-loki/addr-map.c
-@@ -0,0 +1,121 @@
-+/*
-+ * arch/arm/mach-loki/addr-map.c
-+ *
-+ * Address map functions for Marvell Loki (88RC8480) SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mbus.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include "common.h"
-+
-+/*
-+ * Generic Address Decode Windows bit settings
-+ */
-+#define TARGET_DDR		0
-+#define TARGET_DEV_BUS		1
-+#define TARGET_PCIE0		3
-+#define TARGET_PCIE1		4
-+#define ATTR_DEV_BOOT		0x0f
-+#define ATTR_DEV_CS2		0x1b
-+#define ATTR_DEV_CS1		0x1d
-+#define ATTR_DEV_CS0		0x1e
-+#define ATTR_PCIE_IO		0x51
-+#define ATTR_PCIE_MEM		0x59
-+
-+/*
-+ * Helpers to get DDR bank info
-+ */
-+#define DDR_SIZE_CS(n)		DDR_REG(0x1500 + ((n) << 3))
-+#define DDR_BASE_CS(n)		DDR_REG(0x1504 + ((n) << 3))
-+
-+/*
-+ * CPU Address Decode Windows registers
-+ */
-+#define CPU_WIN_CTRL(n)		BRIDGE_REG(0x000 | ((n) << 4))
-+#define CPU_WIN_BASE(n)		BRIDGE_REG(0x004 | ((n) << 4))
-+#define CPU_WIN_REMAP_LO(n)	BRIDGE_REG(0x008 | ((n) << 4))
-+#define CPU_WIN_REMAP_HI(n)	BRIDGE_REG(0x00c | ((n) << 4))
-+
-+
-+struct mbus_dram_target_info loki_mbus_dram_info;
-+
-+static void __init setup_cpu_win(int win, u32 base, u32 size,
-+				 u8 target, u8 attr, int remap)
-+{
-+	u32 ctrl;
-+
-+	base &= 0xffff0000;
-+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target;
-+
-+	writel(base, CPU_WIN_BASE(win));
-+	writel(ctrl, CPU_WIN_CTRL(win));
-+	if (win < 2) {
-+		if (remap < 0)
-+			remap = base;
-+
-+		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
-+		writel(0, CPU_WIN_REMAP_HI(win));
-+	}
-+}
-+
-+void __init loki_setup_cpu_mbus(void)
-+{
-+	int i;
-+	int cs;
-+
-+	/*
-+	 * First, disable and clear windows.
-+	 */
-+	for (i = 0; i < 8; i++) {
-+		writel(0, CPU_WIN_BASE(i));
-+		writel(0, CPU_WIN_CTRL(i));
-+		if (i < 2) {
-+			writel(0, CPU_WIN_REMAP_LO(i));
-+			writel(0, CPU_WIN_REMAP_HI(i));
-+		}
-+	}
-+
-+	/*
-+	 * Setup windows for PCIe IO+MEM space.
-+	 */
-+	setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE,
-+		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
-+	setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE,
-+		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
-+
-+	/*
-+	 * Setup MBUS dram target info.
-+	 */
-+	loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-+
-+	for (i = 0, cs = 0; i < 4; i++) {
-+		u32 base = readl(DDR_BASE_CS(i));
-+		u32 size = readl(DDR_SIZE_CS(i));
-+
-+		/*
-+		 * Chip select enabled?
-+		 */
-+		if (size & 1) {
-+			struct mbus_dram_window *w;
-+
-+			w = &loki_mbus_dram_info.cs[cs++];
-+			w->cs_index = i;
-+			w->mbus_attr = 0xf & ~(1 << i);
-+			w->base = base & 0xffff0000;
-+			w->size = (size | 0x0000ffff) + 1;
-+		}
-+	}
-+	loki_mbus_dram_info.num_cs = cs;
-+}
-+
-+void __init loki_setup_dev_boot_win(u32 base, u32 size)
-+{
-+	setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
-+}
---- /dev/null
-+++ b/arch/arm/mach-loki/common.c
-@@ -0,0 +1,305 @@
-+/*
-+ * arch/arm/mach-loki/common.c
-+ *
-+ * Core functions for Marvell Loki (88RC8480) SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mbus.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/page.h>
-+#include <asm/timex.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/time.h>
-+#include <asm/arch/loki.h>
-+#include <asm/plat-orion/orion_nand.h>
-+#include <asm/plat-orion/time.h>
-+#include "common.h"
-+
-+/*****************************************************************************
-+ * I/O Address Mapping
-+ ****************************************************************************/
-+static struct map_desc loki_io_desc[] __initdata = {
-+	{
-+		.virtual	= LOKI_REGS_VIRT_BASE,
-+		.pfn		= __phys_to_pfn(LOKI_REGS_PHYS_BASE),
-+		.length		= LOKI_REGS_SIZE,
-+		.type		= MT_DEVICE,
-+	},
-+};
-+
-+void __init loki_map_io(void)
-+{
-+	iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc));
-+}
-+
-+
-+/*****************************************************************************
-+ * GE0
-+ ****************************************************************************/
-+struct mv643xx_eth_shared_platform_data loki_ge0_shared_data = {
-+	.t_clk		= LOKI_TCLK,
-+	.dram		= &loki_mbus_dram_info,
-+};
-+
-+static struct resource loki_ge0_shared_resources[] = {
-+	{
-+		.name	= "ge0 base",
-+		.start	= GE0_PHYS_BASE + 0x2000,
-+		.end	= GE0_PHYS_BASE + 0x3fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device loki_ge0_shared = {
-+	.name		= MV643XX_ETH_SHARED_NAME,
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &loki_ge0_shared_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= loki_ge0_shared_resources,
-+};
-+
-+static struct resource loki_ge0_resources[] = {
-+	{
-+		.name	= "ge0 irq",
-+		.start	= IRQ_LOKI_GBE_A_INT,
-+		.end	= IRQ_LOKI_GBE_A_INT,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device loki_ge0 = {
-+	.name		= MV643XX_ETH_NAME,
-+	.id		= 0,
-+	.num_resources	= 1,
-+	.resource	= loki_ge0_resources,
-+};
-+
-+void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
-+{
-+	eth_data->shared = &loki_ge0_shared;
-+	loki_ge0.dev.platform_data = eth_data;
-+
-+	writel(0x00079220, GE0_VIRT_BASE + 0x20b0);
-+	platform_device_register(&loki_ge0_shared);
-+	platform_device_register(&loki_ge0);
-+}
-+
-+
-+/*****************************************************************************
-+ * GE1
-+ ****************************************************************************/
-+struct mv643xx_eth_shared_platform_data loki_ge1_shared_data = {
-+	.t_clk		= LOKI_TCLK,
-+	.dram		= &loki_mbus_dram_info,
-+};
-+
-+static struct resource loki_ge1_shared_resources[] = {
-+	{
-+		.name	= "ge1 base",
-+		.start	= GE1_PHYS_BASE + 0x2000,
-+		.end	= GE1_PHYS_BASE + 0x3fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device loki_ge1_shared = {
-+	.name		= MV643XX_ETH_SHARED_NAME,
-+	.id		= 1,
-+	.dev		= {
-+		.platform_data	= &loki_ge1_shared_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= loki_ge1_shared_resources,
-+};
-+
-+static struct resource loki_ge1_resources[] = {
-+	{
-+		.name	= "ge1 irq",
-+		.start	= IRQ_LOKI_GBE_B_INT,
-+		.end	= IRQ_LOKI_GBE_B_INT,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device loki_ge1 = {
-+	.name		= MV643XX_ETH_NAME,
-+	.id		= 1,
-+	.num_resources	= 1,
-+	.resource	= loki_ge1_resources,
-+};
-+
-+void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
-+{
-+	eth_data->shared = &loki_ge1_shared;
-+	loki_ge1.dev.platform_data = eth_data;
-+
-+	writel(0x00079220, GE1_VIRT_BASE + 0x20b0);
-+	platform_device_register(&loki_ge1_shared);
-+	platform_device_register(&loki_ge1);
-+}
-+
-+
-+/*****************************************************************************
-+ * SAS/SATA
-+ ****************************************************************************/
-+static struct resource loki_sas_resources[] = {
-+	{
-+		.name	= "mvsas0 mem",
-+		.start	= SAS0_PHYS_BASE,
-+		.end	= SAS0_PHYS_BASE + 0x01ff,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.name	= "mvsas0 irq",
-+		.start	= IRQ_LOKI_SAS_A,
-+		.end	= IRQ_LOKI_SAS_A,
-+		.flags	= IORESOURCE_IRQ,
-+	}, {
-+		.name	= "mvsas1 mem",
-+		.start	= SAS1_PHYS_BASE,
-+		.end	= SAS1_PHYS_BASE + 0x01ff,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.name	= "mvsas1 irq",
-+		.start	= IRQ_LOKI_SAS_B,
-+		.end	= IRQ_LOKI_SAS_B,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device loki_sas = {
-+	.name		= "mvsas",
-+	.id		= 0,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+	.num_resources	= ARRAY_SIZE(loki_sas_resources),
-+	.resource	= loki_sas_resources,
-+};
-+
-+void __init loki_sas_init(void)
-+{
-+	writel(0x8300f707, DDR_REG(0x1424));
-+	platform_device_register(&loki_sas);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART0
-+ ****************************************************************************/
-+static struct plat_serial8250_port loki_uart0_data[] = {
-+	{
-+		.mapbase	= UART0_PHYS_BASE,
-+		.membase	= (char *)UART0_VIRT_BASE,
-+		.irq		= IRQ_LOKI_UART0,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= LOKI_TCLK,
-+	}, {
-+	},
-+};
-+
-+static struct resource loki_uart0_resources[] = {
-+	{
-+		.start		= UART0_PHYS_BASE,
-+		.end		= UART0_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_LOKI_UART0,
-+		.end		= IRQ_LOKI_UART0,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device loki_uart0 = {
-+	.name			= "serial8250",
-+	.id			= 0,
-+	.dev			= {
-+		.platform_data	= loki_uart0_data,
-+	},
-+	.resource		= loki_uart0_resources,
-+	.num_resources		= ARRAY_SIZE(loki_uart0_resources),
-+};
-+
-+void __init loki_uart0_init(void)
-+{
-+	platform_device_register(&loki_uart0);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART1
-+ ****************************************************************************/
-+static struct plat_serial8250_port loki_uart1_data[] = {
-+	{
-+		.mapbase	= UART1_PHYS_BASE,
-+		.membase	= (char *)UART1_VIRT_BASE,
-+		.irq		= IRQ_LOKI_UART1,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= LOKI_TCLK,
-+	}, {
-+	},
-+};
-+
-+static struct resource loki_uart1_resources[] = {
-+	{
-+		.start		= UART1_PHYS_BASE,
-+		.end		= UART1_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_LOKI_UART1,
-+		.end		= IRQ_LOKI_UART1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device loki_uart1 = {
-+	.name			= "serial8250",
-+	.id			= 1,
-+	.dev			= {
-+		.platform_data	= loki_uart1_data,
-+	},
-+	.resource		= loki_uart1_resources,
-+	.num_resources		= ARRAY_SIZE(loki_uart1_resources),
-+};
-+
-+void __init loki_uart1_init(void)
-+{
-+	platform_device_register(&loki_uart1);
-+}
-+
-+
-+/*****************************************************************************
-+ * Time handling
-+ ****************************************************************************/
-+static void loki_timer_init(void)
-+{
-+	orion_time_init(IRQ_LOKI_BRIDGE, LOKI_TCLK);
-+}
-+
-+struct sys_timer loki_timer = {
-+	.init = loki_timer_init,
-+};
-+
-+
-+/*****************************************************************************
-+ * General
-+ ****************************************************************************/
-+void __init loki_init(void)
-+{
-+	printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK);
-+
-+	loki_setup_cpu_mbus();
-+}
---- /dev/null
-+++ b/arch/arm/mach-loki/common.h
-@@ -0,0 +1,36 @@
-+/*
-+ * arch/arm/mach-loki/common.h
-+ *
-+ * Core functions for Marvell Loki (88RC8480) SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ARCH_LOKI_COMMON_H
-+#define __ARCH_LOKI_COMMON_H
-+
-+struct mv643xx_eth_platform_data;
-+
-+/*
-+ * Basic Loki init functions used early by machine-setup.
-+ */
-+void loki_map_io(void);
-+void loki_init(void);
-+void loki_init_irq(void);
-+
-+extern struct mbus_dram_target_info loki_mbus_dram_info;
-+void loki_setup_cpu_mbus(void);
-+void loki_setup_dev_boot_win(u32 base, u32 size);
-+
-+void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data);
-+void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data);
-+void loki_sas_init(void);
-+void loki_uart0_init(void);
-+void loki_uart1_init(void);
-+
-+extern struct sys_timer loki_timer;
-+
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-loki/irq.c
-@@ -0,0 +1,21 @@
-+/*
-+ * arch/arm/mach-loki/irq.c
-+ *
-+ * Marvell Loki (88RC8480) IRQ handling.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <asm/io.h>
-+#include <asm/plat-orion/irq.h>
-+#include "common.h"
-+
-+void __init loki_init_irq(void)
-+{
-+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF));
-+}
---- /dev/null
-+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
-@@ -0,0 +1,100 @@
-+/*
-+ * arch/arm/mach-loki/lb88rc8480-setup.c
-+ *
-+ * Marvell LB88RC8480 Development Board Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/timer.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/arch/loki.h>
-+#include "common.h"
-+
-+#define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
-+#define LB88RC8480_FLASH_BOOT_CS_SIZE	SZ_128M
-+
-+#define LB88RC8480_NOR_BOOT_BASE	0xff000000
-+#define LB88RC8480_NOR_BOOT_SIZE	SZ_16M
-+
-+static struct mtd_partition lb88rc8480_boot_flash_parts[] = {
-+	{
-+		.name	= "kernel",
-+		.offset	= 0,
-+		.size	= SZ_2M,
-+	}, {
-+		.name	= "root-fs",
-+		.offset	= SZ_2M,
-+		.size	= (SZ_8M + SZ_4M + SZ_1M),
-+	}, {
-+		.name	= "u-boot",
-+		.offset	= (SZ_8M + SZ_4M + SZ_2M + SZ_1M),
-+		.size	= SZ_1M,
-+	},
-+};
-+
-+static struct physmap_flash_data lb88rc8480_boot_flash_data = {
-+	.parts		= lb88rc8480_boot_flash_parts,
-+	.nr_parts	= ARRAY_SIZE(lb88rc8480_boot_flash_parts),
-+	.width		= 1,	/* 8 bit bus width */
-+};
-+
-+static struct resource lb88rc8480_boot_flash_resource = {
-+	.flags	= IORESOURCE_MEM,
-+	.start	= LB88RC8480_NOR_BOOT_BASE,
-+	.end	= LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device lb88rc8480_boot_flash = {
-+	.name	= "physmap-flash",
-+	.id	= 0,
-+	.dev	= {
-+		.platform_data	= &lb88rc8480_boot_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &lb88rc8480_boot_flash_resource,
-+};
-+
-+static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
-+	.phy_addr	= 1,
-+	.mac_addr	= { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
-+};
-+
-+static void __init lb88rc8480_init(void)
-+{
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	loki_init();
-+
-+	loki_ge0_init(&lb88rc8480_ge0_data);
-+	loki_sas_init();
-+	loki_uart0_init();
-+	loki_uart1_init();
-+
-+	loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE,
-+				LB88RC8480_FLASH_BOOT_CS_SIZE);
-+	platform_device_register(&lb88rc8480_boot_flash);
-+}
-+
-+MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
-+	/* Maintainer: Ke Wei <kewei@marvell.com> */
-+	.phys_io	= LOKI_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= lb88rc8480_init,
-+	.map_io		= loki_map_io,
-+	.init_irq	= loki_init_irq,
-+	.timer		= &loki_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/Kconfig
-@@ -0,0 +1,13 @@
-+if ARCH_MV78XX0
-+
-+menu "Marvell MV78xx0 Implementations"
-+
-+config MACH_DB78X00_BP
-+	bool "Marvell DB-78x00-BP Development Board"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Marvell DB-78x00-BP Development Board.
-+
-+endmenu
-+
-+endif
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/Makefile
-@@ -0,0 +1,2 @@
-+obj-y				+= common.o addr-map.o irq.o pcie.o
-+obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/Makefile.boot
-@@ -0,0 +1,3 @@
-+   zreladdr-y	:= 0x00008000
-+params_phys-y	:= 0x00000100
-+initrd_phys-y	:= 0x00800000
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/addr-map.c
-@@ -0,0 +1,156 @@
-+/*
-+ * arch/arm/mach-mv78xx0/addr-map.c
-+ *
-+ * Address map functions for Marvell MV78xx0 SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mbus.h>
-+#include <asm/io.h>
-+#include "common.h"
-+
-+/*
-+ * Generic Address Decode Windows bit settings
-+ */
-+#define TARGET_DDR		0
-+#define TARGET_DEV_BUS		1
-+#define TARGET_PCIE0		4
-+#define TARGET_PCIE1		8
-+#define TARGET_PCIE(i)		((i) ? TARGET_PCIE1 : TARGET_PCIE0)
-+#define ATTR_DEV_SPI_ROM	0x1f
-+#define ATTR_DEV_BOOT		0x2f
-+#define ATTR_DEV_CS3		0x37
-+#define ATTR_DEV_CS2		0x3b
-+#define ATTR_DEV_CS1		0x3d
-+#define ATTR_DEV_CS0		0x3e
-+#define ATTR_PCIE_IO(l)		(0xf0 & ~(0x10 << (l)))
-+#define ATTR_PCIE_MEM(l)	(0xf8 & ~(0x10 << (l)))
-+
-+/*
-+ * Helpers to get DDR bank info
-+ */
-+#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
-+#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
-+
-+/*
-+ * CPU Address Decode Windows registers
-+ */
-+#define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-+#define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-+#define WIN_CTRL_OFF		0x0000
-+#define WIN_BASE_OFF		0x0004
-+#define WIN_REMAP_LO_OFF	0x0008
-+#define WIN_REMAP_HI_OFF	0x000c
-+
-+
-+struct mbus_dram_target_info mv78xx0_mbus_dram_info;
-+
-+static void __init __iomem *win_cfg_base(int win)
-+{
-+	/*
-+	 * Find the control register base address for this window.
-+	 *
-+	 * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
-+	 * MBUS bridge depending on which CPU core we're running on,
-+	 * so we don't need to take that into account here.
-+	 */
-+
-+	return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
-+}
-+
-+static int __init cpu_win_can_remap(int win)
-+{
-+	if (win < 8)
-+		return 1;
-+
-+	return 0;
-+}
-+
-+static void __init setup_cpu_win(int win, u32 base, u32 size,
-+				 u8 target, u8 attr, int remap)
-+{
-+	void __iomem *addr = win_cfg_base(win);
-+	u32 ctrl;
-+
-+	base &= 0xffff0000;
-+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-+
-+	writel(base, addr + WIN_BASE_OFF);
-+	writel(ctrl, addr + WIN_CTRL_OFF);
-+	if (cpu_win_can_remap(win)) {
-+		if (remap < 0)
-+			remap = base;
-+
-+		writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
-+		writel(0, addr + WIN_REMAP_HI_OFF);
-+	}
-+}
-+
-+void __init mv78xx0_setup_cpu_mbus(void)
-+{
-+	void __iomem *addr;
-+	int i;
-+	int cs;
-+
-+	/*
-+	 * First, disable and clear windows.
-+	 */
-+	for (i = 0; i < 14; i++) {
-+		addr = win_cfg_base(i);
-+
-+		writel(0, addr + WIN_BASE_OFF);
-+		writel(0, addr + WIN_CTRL_OFF);
-+		if (cpu_win_can_remap(i)) {
-+			writel(0, addr + WIN_REMAP_LO_OFF);
-+			writel(0, addr + WIN_REMAP_HI_OFF);
-+		}
-+	}
-+
-+	/*
-+	 * Setup MBUS dram target info.
-+	 */
-+	mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-+
-+	if (mv78xx0_core_index() == 0)
-+		addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
-+	else
-+		addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
-+
-+	for (i = 0, cs = 0; i < 4; i++) {
-+		u32 base = readl(addr + DDR_BASE_CS_OFF(i));
-+		u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
-+
-+		/*
-+		 * Chip select enabled?
-+		 */
-+		if (size & 1) {
-+			struct mbus_dram_window *w;
-+
-+			w = &mv78xx0_mbus_dram_info.cs[cs++];
-+			w->cs_index = i;
-+			w->mbus_attr = 0xf & ~(1 << i);
-+			w->base = base & 0xffff0000;
-+			w->size = (size | 0x0000ffff) + 1;
-+		}
-+	}
-+	mv78xx0_mbus_dram_info.num_cs = cs;
-+}
-+
-+void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
-+				      int maj, int min)
-+{
-+	setup_cpu_win(window, base, size, TARGET_PCIE(maj),
-+		      ATTR_PCIE_IO(min), -1);
-+}
-+
-+void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
-+				       int maj, int min)
-+{
-+	setup_cpu_win(window, base, size, TARGET_PCIE(maj),
-+		      ATTR_PCIE_MEM(min), -1);
-+}
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/common.c
-@@ -0,0 +1,754 @@
-+/*
-+ * arch/arm/mach-mv78xx0/common.c
-+ *
-+ * Core functions for Marvell MV78xx0 SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mbus.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/ata_platform.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/time.h>
-+#include <asm/arch/mv78xx0.h>
-+#include <asm/plat-orion/cache-feroceon-l2.h>
-+#include <asm/plat-orion/ehci-orion.h>
-+#include <asm/plat-orion/orion_nand.h>
-+#include <asm/plat-orion/time.h>
-+#include "common.h"
-+
-+
-+/*****************************************************************************
-+ * Common bits
-+ ****************************************************************************/
-+int mv78xx0_core_index(void)
-+{
-+	u32 extra;
-+
-+	/*
-+	 * Read Extra Features register.
-+	 */
-+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra));
-+
-+	return !!(extra & 0x00004000);
-+}
-+
-+static int get_hclk(void)
-+{
-+	int hclk;
-+
-+	/*
-+	 * HCLK tick rate is configured by DEV_D[7:5] pins.
-+	 */
-+	switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) {
-+	case 0:
-+		hclk = 166666667;
-+		break;
-+	case 1:
-+		hclk = 200000000;
-+		break;
-+	case 2:
-+		hclk = 266666667;
-+		break;
-+	case 3:
-+		hclk = 333333333;
-+		break;
-+	case 4:
-+		hclk = 400000000;
-+		break;
-+	default:
-+		panic("unknown HCLK PLL setting: %.8x\n",
-+			readl(SAMPLE_AT_RESET_LOW));
-+	}
-+
-+	return hclk;
-+}
-+
-+static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
-+{
-+	u32 cfg;
-+
-+	/*
-+	 * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1
-+	 * PCLK/L2CLK by bits [19:14].
-+	 */
-+	if (core_index == 0) {
-+		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f;
-+	} else {
-+		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f;
-+	}
-+
-+	/*
-+	 * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK
-+	 * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6).
-+	 */
-+	*pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1;
-+
-+	/*
-+	 * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK
-+	 * ratio (1, 2, 3).
-+	 */
-+	*l2clk = *pclk / (((cfg >> 4) & 3) + 1);
-+}
-+
-+static int get_tclk(void)
-+{
-+	int tclk;
-+
-+	/*
-+	 * TCLK tick rate is configured by DEV_A[2:0] strap pins.
-+	 */
-+	switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
-+	case 1:
-+		tclk = 166666667;
-+		break;
-+	case 3:
-+		tclk = 200000000;
-+		break;
-+	default:
-+		panic("unknown TCLK PLL setting: %.8x\n",
-+			readl(SAMPLE_AT_RESET_HIGH));
-+	}
-+
-+	return tclk;
-+}
-+
-+
-+/*****************************************************************************
-+ * I/O Address Mapping
-+ ****************************************************************************/
-+static struct map_desc mv78xx0_io_desc[] __initdata = {
-+	{
-+		.virtual	= MV78XX0_CORE_REGS_VIRT_BASE,
-+		.pfn		= 0,
-+		.length		= MV78XX0_CORE_REGS_SIZE,
-+		.type		= MT_DEVICE,
-+	}, {
-+		.virtual	= MV78XX0_PCIE_IO_VIRT_BASE(0),
-+		.pfn		= __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
-+		.length		= MV78XX0_PCIE_IO_SIZE * 8,
-+		.type		= MT_DEVICE,
-+	}, {
-+		.virtual	= MV78XX0_REGS_VIRT_BASE,
-+		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
-+		.length		= MV78XX0_REGS_SIZE,
-+		.type		= MT_DEVICE,
-+	},
-+};
-+
-+void __init mv78xx0_map_io(void)
-+{
-+	unsigned long phys;
-+
-+	/*
-+	 * Map the right set of per-core registers depending on
-+	 * which core we are running on.
-+	 */
-+	if (mv78xx0_core_index() == 0) {
-+		phys = MV78XX0_CORE0_REGS_PHYS_BASE;
-+	} else {
-+		phys = MV78XX0_CORE1_REGS_PHYS_BASE;
-+	}
-+	mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys);
-+
-+	iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc));
-+}
-+
-+
-+/*****************************************************************************
-+ * EHCI
-+ ****************************************************************************/
-+static struct orion_ehci_data mv78xx0_ehci_data = {
-+	.dram		= &mv78xx0_mbus_dram_info,
-+};
-+
-+static u64 ehci_dmamask = 0xffffffffUL;
-+
-+
-+/*****************************************************************************
-+ * EHCI0
-+ ****************************************************************************/
-+static struct resource mv78xx0_ehci0_resources[] = {
-+	{
-+		.start	= USB0_PHYS_BASE,
-+		.end	= USB0_PHYS_BASE + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.start	= IRQ_MV78XX0_USB_0,
-+		.end	= IRQ_MV78XX0_USB_0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ehci0 = {
-+	.name		= "orion-ehci",
-+	.id		= 0,
-+	.dev		= {
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+		.platform_data		= &mv78xx0_ehci_data,
-+	},
-+	.resource	= mv78xx0_ehci0_resources,
-+	.num_resources	= ARRAY_SIZE(mv78xx0_ehci0_resources),
-+};
-+
-+void __init mv78xx0_ehci0_init(void)
-+{
-+	platform_device_register(&mv78xx0_ehci0);
-+}
-+
-+
-+/*****************************************************************************
-+ * EHCI1
-+ ****************************************************************************/
-+static struct resource mv78xx0_ehci1_resources[] = {
-+	{
-+		.start	= USB1_PHYS_BASE,
-+		.end	= USB1_PHYS_BASE + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.start	= IRQ_MV78XX0_USB_1,
-+		.end	= IRQ_MV78XX0_USB_1,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ehci1 = {
-+	.name		= "orion-ehci",
-+	.id		= 1,
-+	.dev		= {
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+		.platform_data		= &mv78xx0_ehci_data,
-+	},
-+	.resource	= mv78xx0_ehci1_resources,
-+	.num_resources	= ARRAY_SIZE(mv78xx0_ehci1_resources),
-+};
-+
-+void __init mv78xx0_ehci1_init(void)
-+{
-+	platform_device_register(&mv78xx0_ehci1);
-+}
-+
-+
-+/*****************************************************************************
-+ * EHCI2
-+ ****************************************************************************/
-+static struct resource mv78xx0_ehci2_resources[] = {
-+	{
-+		.start	= USB2_PHYS_BASE,
-+		.end	= USB2_PHYS_BASE + 0x0fff,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.start	= IRQ_MV78XX0_USB_2,
-+		.end	= IRQ_MV78XX0_USB_2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ehci2 = {
-+	.name		= "orion-ehci",
-+	.id		= 2,
-+	.dev		= {
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+		.platform_data		= &mv78xx0_ehci_data,
-+	},
-+	.resource	= mv78xx0_ehci2_resources,
-+	.num_resources	= ARRAY_SIZE(mv78xx0_ehci2_resources),
-+};
-+
-+void __init mv78xx0_ehci2_init(void)
-+{
-+	platform_device_register(&mv78xx0_ehci2);
-+}
-+
-+
-+/*****************************************************************************
-+ * GE00
-+ ****************************************************************************/
-+struct mv643xx_eth_shared_platform_data mv78xx0_ge00_shared_data = {
-+	.t_clk		= 0,
-+	.dram		= &mv78xx0_mbus_dram_info,
-+};
-+
-+static struct resource mv78xx0_ge00_shared_resources[] = {
-+	{
-+		.name	= "ge00 base",
-+		.start	= GE00_PHYS_BASE + 0x2000,
-+		.end	= GE00_PHYS_BASE + 0x3fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge00_shared = {
-+	.name		= MV643XX_ETH_SHARED_NAME,
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &mv78xx0_ge00_shared_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge00_shared_resources,
-+};
-+
-+static struct resource mv78xx0_ge00_resources[] = {
-+	{
-+		.name	= "ge00 irq",
-+		.start	= IRQ_MV78XX0_GE00_SUM,
-+		.end	= IRQ_MV78XX0_GE00_SUM,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge00 = {
-+	.name		= MV643XX_ETH_NAME,
-+	.id		= 0,
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge00_resources,
-+};
-+
-+void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-+{
-+	eth_data->shared = &mv78xx0_ge00_shared;
-+	mv78xx0_ge00.dev.platform_data = eth_data;
-+
-+	platform_device_register(&mv78xx0_ge00_shared);
-+	platform_device_register(&mv78xx0_ge00);
-+}
-+
-+
-+/*****************************************************************************
-+ * GE01
-+ ****************************************************************************/
-+struct mv643xx_eth_shared_platform_data mv78xx0_ge01_shared_data = {
-+	.t_clk		= 0,
-+	.dram		= &mv78xx0_mbus_dram_info,
-+};
-+
-+static struct resource mv78xx0_ge01_shared_resources[] = {
-+	{
-+		.name	= "ge01 base",
-+		.start	= GE01_PHYS_BASE + 0x2000,
-+		.end	= GE01_PHYS_BASE + 0x3fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge01_shared = {
-+	.name		= MV643XX_ETH_SHARED_NAME,
-+	.id		= 1,
-+	.dev		= {
-+		.platform_data	= &mv78xx0_ge01_shared_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge01_shared_resources,
-+};
-+
-+static struct resource mv78xx0_ge01_resources[] = {
-+	{
-+		.name	= "ge01 irq",
-+		.start	= IRQ_MV78XX0_GE01_SUM,
-+		.end	= IRQ_MV78XX0_GE01_SUM,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge01 = {
-+	.name		= MV643XX_ETH_NAME,
-+	.id		= 1,
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge01_resources,
-+};
-+
-+void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-+{
-+	eth_data->shared = &mv78xx0_ge01_shared;
-+	eth_data->shared_smi = &mv78xx0_ge00_shared;
-+	mv78xx0_ge01.dev.platform_data = eth_data;
-+
-+	platform_device_register(&mv78xx0_ge01_shared);
-+	platform_device_register(&mv78xx0_ge01);
-+}
-+
-+
-+/*****************************************************************************
-+ * GE10
-+ ****************************************************************************/
-+struct mv643xx_eth_shared_platform_data mv78xx0_ge10_shared_data = {
-+	.t_clk		= 0,
-+	.dram		= &mv78xx0_mbus_dram_info,
-+};
-+
-+static struct resource mv78xx0_ge10_shared_resources[] = {
-+	{
-+		.name	= "ge10 base",
-+		.start	= GE10_PHYS_BASE + 0x2000,
-+		.end	= GE10_PHYS_BASE + 0x3fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge10_shared = {
-+	.name		= MV643XX_ETH_SHARED_NAME,
-+	.id		= 2,
-+	.dev		= {
-+		.platform_data	= &mv78xx0_ge10_shared_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge10_shared_resources,
-+};
-+
-+static struct resource mv78xx0_ge10_resources[] = {
-+	{
-+		.name	= "ge10 irq",
-+		.start	= IRQ_MV78XX0_GE10_SUM,
-+		.end	= IRQ_MV78XX0_GE10_SUM,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge10 = {
-+	.name		= MV643XX_ETH_NAME,
-+	.id		= 2,
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge10_resources,
-+};
-+
-+void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
-+{
-+	eth_data->shared = &mv78xx0_ge10_shared;
-+	eth_data->shared_smi = &mv78xx0_ge00_shared;
-+	mv78xx0_ge10.dev.platform_data = eth_data;
-+
-+	platform_device_register(&mv78xx0_ge10_shared);
-+	platform_device_register(&mv78xx0_ge10);
-+}
-+
-+
-+/*****************************************************************************
-+ * GE11
-+ ****************************************************************************/
-+struct mv643xx_eth_shared_platform_data mv78xx0_ge11_shared_data = {
-+	.t_clk		= 0,
-+	.dram		= &mv78xx0_mbus_dram_info,
-+};
-+
-+static struct resource mv78xx0_ge11_shared_resources[] = {
-+	{
-+		.name	= "ge11 base",
-+		.start	= GE11_PHYS_BASE + 0x2000,
-+		.end	= GE11_PHYS_BASE + 0x3fff,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge11_shared = {
-+	.name		= MV643XX_ETH_SHARED_NAME,
-+	.id		= 3,
-+	.dev		= {
-+		.platform_data	= &mv78xx0_ge11_shared_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge11_shared_resources,
-+};
-+
-+static struct resource mv78xx0_ge11_resources[] = {
-+	{
-+		.name	= "ge11 irq",
-+		.start	= IRQ_MV78XX0_GE11_SUM,
-+		.end	= IRQ_MV78XX0_GE11_SUM,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_ge11 = {
-+	.name		= MV643XX_ETH_NAME,
-+	.id		= 3,
-+	.num_resources	= 1,
-+	.resource	= mv78xx0_ge11_resources,
-+};
-+
-+void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
-+{
-+	eth_data->shared = &mv78xx0_ge11_shared;
-+	eth_data->shared_smi = &mv78xx0_ge00_shared;
-+	mv78xx0_ge11.dev.platform_data = eth_data;
-+
-+	platform_device_register(&mv78xx0_ge11_shared);
-+	platform_device_register(&mv78xx0_ge11);
-+}
-+
-+
-+/*****************************************************************************
-+ * SATA
-+ ****************************************************************************/
-+static struct resource mv78xx0_sata_resources[] = {
-+	{
-+		.name	= "sata base",
-+		.start	= SATA_PHYS_BASE,
-+		.end	= SATA_PHYS_BASE + 0x5000 - 1,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.name	= "sata irq",
-+		.start	= IRQ_MV78XX0_SATA,
-+		.end	= IRQ_MV78XX0_SATA,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_sata = {
-+	.name		= "sata_mv",
-+	.id		= 0,
-+	.dev		= {
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+	.num_resources	= ARRAY_SIZE(mv78xx0_sata_resources),
-+	.resource	= mv78xx0_sata_resources,
-+};
-+
-+void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
-+{
-+	sata_data->dram = &mv78xx0_mbus_dram_info;
-+	mv78xx0_sata.dev.platform_data = sata_data;
-+	platform_device_register(&mv78xx0_sata);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART0
-+ ****************************************************************************/
-+static struct plat_serial8250_port mv78xx0_uart0_data[] = {
-+	{
-+		.mapbase	= UART0_PHYS_BASE,
-+		.membase	= (char *)UART0_VIRT_BASE,
-+		.irq		= IRQ_MV78XX0_UART_0,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= 0,
-+	}, {
-+	},
-+};
-+
-+static struct resource mv78xx0_uart0_resources[] = {
-+	{
-+		.start		= UART0_PHYS_BASE,
-+		.end		= UART0_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_MV78XX0_UART_0,
-+		.end		= IRQ_MV78XX0_UART_0,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_uart0 = {
-+	.name			= "serial8250",
-+	.id			= 0,
-+	.dev			= {
-+		.platform_data	= mv78xx0_uart0_data,
-+	},
-+	.resource		= mv78xx0_uart0_resources,
-+	.num_resources		= ARRAY_SIZE(mv78xx0_uart0_resources),
-+};
-+
-+void __init mv78xx0_uart0_init(void)
-+{
-+	platform_device_register(&mv78xx0_uart0);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART1
-+ ****************************************************************************/
-+static struct plat_serial8250_port mv78xx0_uart1_data[] = {
-+	{
-+		.mapbase	= UART1_PHYS_BASE,
-+		.membase	= (char *)UART1_VIRT_BASE,
-+		.irq		= IRQ_MV78XX0_UART_1,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= 0,
-+	}, {
-+	},
-+};
-+
-+static struct resource mv78xx0_uart1_resources[] = {
-+	{
-+		.start		= UART1_PHYS_BASE,
-+		.end		= UART1_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_MV78XX0_UART_1,
-+		.end		= IRQ_MV78XX0_UART_1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_uart1 = {
-+	.name			= "serial8250",
-+	.id			= 1,
-+	.dev			= {
-+		.platform_data	= mv78xx0_uart1_data,
-+	},
-+	.resource		= mv78xx0_uart1_resources,
-+	.num_resources		= ARRAY_SIZE(mv78xx0_uart1_resources),
-+};
-+
-+void __init mv78xx0_uart1_init(void)
-+{
-+	platform_device_register(&mv78xx0_uart1);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART2
-+ ****************************************************************************/
-+static struct plat_serial8250_port mv78xx0_uart2_data[] = {
-+	{
-+		.mapbase	= UART2_PHYS_BASE,
-+		.membase	= (char *)UART2_VIRT_BASE,
-+		.irq		= IRQ_MV78XX0_UART_2,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= 0,
-+	}, {
-+	},
-+};
-+
-+static struct resource mv78xx0_uart2_resources[] = {
-+	{
-+		.start		= UART2_PHYS_BASE,
-+		.end		= UART2_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_MV78XX0_UART_2,
-+		.end		= IRQ_MV78XX0_UART_2,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_uart2 = {
-+	.name			= "serial8250",
-+	.id			= 2,
-+	.dev			= {
-+		.platform_data	= mv78xx0_uart2_data,
-+	},
-+	.resource		= mv78xx0_uart2_resources,
-+	.num_resources		= ARRAY_SIZE(mv78xx0_uart2_resources),
-+};
-+
-+void __init mv78xx0_uart2_init(void)
-+{
-+	platform_device_register(&mv78xx0_uart2);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART3
-+ ****************************************************************************/
-+static struct plat_serial8250_port mv78xx0_uart3_data[] = {
-+	{
-+		.mapbase	= UART3_PHYS_BASE,
-+		.membase	= (char *)UART3_VIRT_BASE,
-+		.irq		= IRQ_MV78XX0_UART_3,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= 0,
-+	}, {
-+	},
-+};
-+
-+static struct resource mv78xx0_uart3_resources[] = {
-+	{
-+		.start		= UART3_PHYS_BASE,
-+		.end		= UART3_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_MV78XX0_UART_3,
-+		.end		= IRQ_MV78XX0_UART_3,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device mv78xx0_uart3 = {
-+	.name			= "serial8250",
-+	.id			= 3,
-+	.dev			= {
-+		.platform_data	= mv78xx0_uart3_data,
-+	},
-+	.resource		= mv78xx0_uart3_resources,
-+	.num_resources		= ARRAY_SIZE(mv78xx0_uart3_resources),
-+};
-+
-+void __init mv78xx0_uart3_init(void)
-+{
-+	platform_device_register(&mv78xx0_uart3);
-+}
-+
-+
-+/*****************************************************************************
-+ * Time handling
-+ ****************************************************************************/
-+static void mv78xx0_timer_init(void)
-+{
-+	orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk());
-+}
-+
-+struct sys_timer mv78xx0_timer = {
-+	.init = mv78xx0_timer_init,
-+};
-+
-+
-+/*****************************************************************************
-+ * General
-+ ****************************************************************************/
-+static int __init is_l2_writethrough(void)
-+{
-+	return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
-+}
-+
-+void __init mv78xx0_init(void)
-+{
-+	int core_index;
-+	int hclk;
-+	int pclk;
-+	int l2clk;
-+	int tclk;
-+
-+	core_index = mv78xx0_core_index();
-+	hclk = get_hclk();
-+	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
-+	tclk = get_tclk();
-+
-+	printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
-+	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
-+	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
-+	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
-+	printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
-+
-+	mv78xx0_setup_cpu_mbus();
-+
-+#ifdef CONFIG_CACHE_FEROCEON_L2
-+	feroceon_l2_init(is_l2_writethrough());
-+#endif
-+
-+	mv78xx0_ge00_shared_data.t_clk = tclk;
-+	mv78xx0_ge01_shared_data.t_clk = tclk;
-+	mv78xx0_ge10_shared_data.t_clk = tclk;
-+	mv78xx0_ge11_shared_data.t_clk = tclk;
-+	mv78xx0_uart0_data[0].uartclk = tclk;
-+	mv78xx0_uart1_data[0].uartclk = tclk;
-+	mv78xx0_uart2_data[0].uartclk = tclk;
-+	mv78xx0_uart3_data[0].uartclk = tclk;
-+}
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/common.h
-@@ -0,0 +1,49 @@
-+/*
-+ * arch/arm/mach-mv78xx0/common.h
-+ *
-+ * Core functions for Marvell MV78xx0 SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ARCH_MV78XX0_COMMON_H
-+#define __ARCH_MV78XX0_COMMON_H
-+
-+struct mv643xx_eth_platform_data;
-+struct mv_sata_platform_data;
-+
-+/*
-+ * Basic MV78xx0 init functions used early by machine-setup.
-+ */
-+int mv78xx0_core_index(void);
-+void mv78xx0_map_io(void);
-+void mv78xx0_init(void);
-+void mv78xx0_init_irq(void);
-+
-+extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
-+void mv78xx0_setup_cpu_mbus(void);
-+void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
-+			       int maj, int min);
-+void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
-+				int maj, int min);
-+
-+void mv78xx0_ehci0_init(void);
-+void mv78xx0_ehci1_init(void);
-+void mv78xx0_ehci2_init(void);
-+void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-+void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data);
-+void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data);
-+void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data);
-+void mv78xx0_pcie_init(int init_port0, int init_port1);
-+void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data);
-+void mv78xx0_uart0_init(void);
-+void mv78xx0_uart1_init(void);
-+void mv78xx0_uart2_init(void);
-+void mv78xx0_uart3_init(void);
-+
-+extern struct sys_timer mv78xx0_timer;
-+
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
-@@ -0,0 +1,94 @@
-+/*
-+ * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
-+ *
-+ * Marvell DB-78x00-BP Development Board Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/arch/mv78xx0.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include "common.h"
-+
-+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
-+	.phy_addr	= 8,
-+};
-+
-+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
-+	.phy_addr	= 9,
-+};
-+
-+static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-+	.phy_addr	= -1,
-+};
-+
-+static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-+	.phy_addr	= -1,
-+};
-+
-+static struct mv_sata_platform_data db78x00_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+static void __init db78x00_init(void)
-+{
-+	/*
-+	 * Basic MV78xx0 setup. Needs to be called early.
-+	 */
-+	mv78xx0_init();
-+
-+	/*
-+	 * Partition on-chip peripherals between the two CPU cores.
-+	 */
-+	if (mv78xx0_core_index() == 0) {
-+		mv78xx0_ehci0_init();
-+		mv78xx0_ehci1_init();
-+		mv78xx0_ehci2_init();
-+		mv78xx0_ge00_init(&db78x00_ge00_data);
-+		mv78xx0_ge01_init(&db78x00_ge01_data);
-+		mv78xx0_ge10_init(&db78x00_ge10_data);
-+		mv78xx0_ge11_init(&db78x00_ge11_data);
-+		mv78xx0_sata_init(&db78x00_sata_data);
-+		mv78xx0_uart0_init();
-+		mv78xx0_uart2_init();
-+	} else {
-+		mv78xx0_uart1_init();
-+		mv78xx0_uart3_init();
-+	}
-+}
-+
-+static int __init db78x00_pci_init(void)
-+{
-+	if (machine_is_db78x00_bp()) {
-+		/*
-+		 * Assign the x16 PCIe slot on the board to CPU core
-+		 * #0, and let CPU core #1 have the four x1 slots.
-+		 */
-+		if (mv78xx0_core_index() == 0)
-+			mv78xx0_pcie_init(0, 1);
-+		else
-+			mv78xx0_pcie_init(1, 0);
-+	}
-+
-+	return 0;
-+}
-+subsys_initcall(db78x00_pci_init);
-+
-+MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
-+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= db78x00_init,
-+	.map_io		= mv78xx0_map_io,
-+	.init_irq	= mv78xx0_init_irq,
-+	.timer		= &mv78xx0_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/irq.c
-@@ -0,0 +1,22 @@
-+/*
-+ * arch/arm/mach-mv78xx0/irq.c
-+ *
-+ * MV78xx0 IRQ handling.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <asm/arch/mv78xx0.h>
-+#include <asm/plat-orion/irq.h>
-+#include "common.h"
-+
-+void __init mv78xx0_init_irq(void)
-+{
-+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-+}
---- /dev/null
-+++ b/arch/arm/mach-mv78xx0/pcie.c
-@@ -0,0 +1,312 @@
-+/*
-+ * arch/arm/mach-mv78xx0/pcie.c
-+ *
-+ * PCIe functions for Marvell MV78xx0 SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/mbus.h>
-+#include <asm/mach/pci.h>
-+#include <asm/plat-orion/pcie.h>
-+#include "common.h"
-+
-+struct pcie_port {
-+	u8			maj;
-+	u8			min;
-+	u8			root_bus_nr;
-+	void __iomem		*base;
-+	spinlock_t		conf_lock;
-+	char			io_space_name[16];
-+	char			mem_space_name[16];
-+	struct resource		res[2];
-+};
-+
-+static struct pcie_port pcie_port[8];
-+static int num_pcie_ports;
-+static struct resource pcie_io_space;
-+static struct resource pcie_mem_space;
-+
-+
-+static void __init mv78xx0_pcie_preinit(void)
-+{
-+	int i;
-+	u32 size_each;
-+	u32 start;
-+	int win;
-+
-+	pcie_io_space.name = "PCIe I/O Space";
-+	pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
-+	pcie_io_space.end =
-+		MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
-+	pcie_io_space.flags = IORESOURCE_IO;
-+	if (request_resource(&iomem_resource, &pcie_io_space))
-+		panic("can't allocate PCIe I/O space");
-+
-+	pcie_mem_space.name = "PCIe MEM Space";
-+	pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
-+	pcie_mem_space.end =
-+		MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
-+	pcie_mem_space.flags = IORESOURCE_MEM;
-+	if (request_resource(&iomem_resource, &pcie_mem_space))
-+		panic("can't allocate PCIe MEM space");
-+
-+	for (i = 0; i < num_pcie_ports; i++) {
-+		struct pcie_port *pp = pcie_port + i;
-+
-+		snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-+			"PCIe %d.%d I/O", pp->maj, pp->min);
-+		pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-+		pp->res[0].name = pp->io_space_name;
-+		pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
-+		pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
-+		pp->res[0].flags = IORESOURCE_IO;
-+
-+		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
-+			"PCIe %d.%d MEM", pp->maj, pp->min);
-+		pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-+		pp->res[1].name = pp->mem_space_name;
-+		pp->res[1].flags = IORESOURCE_MEM;
-+	}
-+
-+	switch (num_pcie_ports) {
-+	case 0:
-+		size_each = 0;
-+		break;
-+
-+	case 1:
-+		size_each = 0x30000000;
-+		break;
-+
-+	case 2 ... 3:
-+		size_each = 0x10000000;
-+		break;
-+
-+	case 4 ... 6:
-+		size_each = 0x08000000;
-+		break;
-+
-+	case 7:
-+		size_each = 0x04000000;
-+		break;
-+
-+	default:
-+		panic("invalid number of PCIe ports");
-+	}
-+
-+	start = MV78XX0_PCIE_MEM_PHYS_BASE;
-+	for (i = 0; i < num_pcie_ports; i++) {
-+		struct pcie_port *pp = pcie_port + i;
-+
-+		pp->res[1].start = start;
-+		pp->res[1].end = start + size_each - 1;
-+		start += size_each;
-+	}
-+
-+	for (i = 0; i < num_pcie_ports; i++) {
-+		struct pcie_port *pp = pcie_port + i;
-+
-+		if (request_resource(&pcie_io_space, &pp->res[0]))
-+			panic("can't allocate PCIe I/O sub-space");
-+
-+		if (request_resource(&pcie_mem_space, &pp->res[1]))
-+			panic("can't allocate PCIe MEM sub-space");
-+	}
-+
-+	win = 0;
-+	for (i = 0; i < num_pcie_ports; i++) {
-+		struct pcie_port *pp = pcie_port + i;
-+
-+		mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
-+			pp->res[0].end - pp->res[0].start + 1,
-+			pp->maj, pp->min);
-+
-+		mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
-+			pp->res[1].end - pp->res[1].start + 1,
-+			pp->maj, pp->min);
-+	}
-+}
-+
-+static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
-+{
-+	struct pcie_port *pp;
-+
-+	if (nr >= num_pcie_ports)
-+		return 0;
-+
-+	pp = &pcie_port[nr];
-+	pp->root_bus_nr = sys->busnr;
-+
-+	/*
-+	 * Generic PCIe unit setup.
-+	 */
-+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
-+	orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
-+
-+	sys->resource[0] = &pp->res[0];
-+	sys->resource[1] = &pp->res[1];
-+	sys->resource[2] = NULL;
-+
-+	return 1;
-+}
-+
-+static struct pcie_port *bus_to_port(int bus)
-+{
-+	int i;
-+
-+	for (i = num_pcie_ports - 1; i >= 0; i--) {
-+		int rbus = pcie_port[i].root_bus_nr;
-+		if (rbus != -1 && rbus <= bus)
-+			break;
-+	}
-+
-+	return i >= 0 ? pcie_port + i : NULL;
-+}
-+
-+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-+{
-+	/*
-+	 * Don't go out when trying to access nonexisting devices
-+	 * on the local bus.
-+	 */
-+	if (bus == pp->root_bus_nr && dev > 1)
-+		return 0;
-+
-+	return 1;
-+}
-+
-+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-+			int size, u32 *val)
-+{
-+	struct pcie_port *pp = bus_to_port(bus->number);
-+	unsigned long flags;
-+	int ret;
-+
-+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
-+		*val = 0xffffffff;
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+	}
-+
-+	spin_lock_irqsave(&pp->conf_lock, flags);
-+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
-+	spin_unlock_irqrestore(&pp->conf_lock, flags);
-+
-+	return ret;
-+}
-+
-+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-+			int where, int size, u32 val)
-+{
-+	struct pcie_port *pp = bus_to_port(bus->number);
-+	unsigned long flags;
-+	int ret;
-+
-+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
-+		return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+	spin_lock_irqsave(&pp->conf_lock, flags);
-+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
-+	spin_unlock_irqrestore(&pp->conf_lock, flags);
-+
-+	return ret;
-+}
-+
-+static struct pci_ops pcie_ops = {
-+	.read = pcie_rd_conf,
-+	.write = pcie_wr_conf,
-+};
-+
-+static void __devinit rc_pci_fixup(struct pci_dev *dev)
-+{
-+	/*
-+	 * Prevent enumeration of root complex.
-+	 */
-+	if (dev->bus->parent == NULL && dev->devfn == 0) {
-+		int i;
-+
-+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-+			dev->resource[i].start = 0;
-+			dev->resource[i].end   = 0;
-+			dev->resource[i].flags = 0;
-+		}
-+	}
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-+
-+static struct pci_bus __init *
-+mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-+{
-+	struct pci_bus *bus;
-+
-+	if (nr < num_pcie_ports) {
-+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
-+	} else {
-+		bus = NULL;
-+		BUG();
-+	}
-+
-+	return bus;
-+}
-+
-+static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	struct pcie_port *pp = bus_to_port(dev->bus->number);
-+
-+	return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
-+}
-+
-+static struct hw_pci mv78xx0_pci __initdata = {
-+	.nr_controllers	= 8,
-+	.preinit	= mv78xx0_pcie_preinit,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= mv78xx0_pcie_setup,
-+	.scan		= mv78xx0_pcie_scan_bus,
-+	.map_irq	= mv78xx0_pcie_map_irq,
-+};
-+
-+static void __init add_pcie_port(int maj, int min, unsigned long base)
-+{
-+	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
-+
-+	if (orion_pcie_link_up((void __iomem *)base)) {
-+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
-+
-+		printk("link up\n");
-+
-+		pp->maj = maj;
-+		pp->min = min;
-+		pp->root_bus_nr = -1;
-+		pp->base = (void __iomem *)base;
-+		spin_lock_init(&pp->conf_lock);
-+		memset(pp->res, 0, sizeof(pp->res));
-+	} else {
-+		printk("link down, ignoring\n");
-+	}
-+}
-+
-+void __init mv78xx0_pcie_init(int init_port0, int init_port1)
-+{
-+	if (init_port0) {
-+		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
-+		if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
-+			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
-+			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
-+			add_pcie_port(0, 3, PCIE03_VIRT_BASE);
-+		}
-+	}
-+
-+	if (init_port1) {
-+		add_pcie_port(1, 0, PCIE10_VIRT_BASE);
-+		if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) {
-+			add_pcie_port(1, 1, PCIE11_VIRT_BASE);
-+			add_pcie_port(1, 2, PCIE12_VIRT_BASE);
-+			add_pcie_port(1, 3, PCIE13_VIRT_BASE);
-+		}
-+	}
-+
-+	pci_common_init(&mv78xx0_pci);
-+}
---- a/arch/arm/mach-orion5x/Kconfig
-+++ b/arch/arm/mach-orion5x/Kconfig
-@@ -44,6 +44,36 @@ config MACH_LINKSTATION_PRO
- 	  Buffalo Linkstation Pro/Live platform. Both v1 and
- 	  v2 devices are supported.
- 
-+config MACH_TS409
-+	bool "QNAP TS-409"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  QNAP TS-409 platform.
-+
-+config MACH_WRT350N_V2
-+	bool "Linksys WRT350N v2"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Linksys WRT350N v2 platform.
-+
-+config MACH_TS78XX
-+	bool "Technologic Systems TS-78xx"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Technologic Systems TS-78xx platform.
-+
-+config MACH_MV2120
-+	bool "HP Media Vault mv2120"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  HP Media Vault mv2120 or mv5100.
-+
-+config MACH_MSS2
-+	bool "Maxtor Shared Storage II"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Maxtor Shared Storage II platform.
-+
- endmenu
- 
- endif
---- a/arch/arm/mach-orion5x/Makefile
-+++ b/arch/arm/mach-orion5x/Makefile
-@@ -1,7 +1,12 @@
--obj-y				+= common.o addr-map.o pci.o gpio.o irq.o
-+obj-y				+= common.o addr-map.o pci.o gpio.o irq.o mpp.o
- obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
- obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
- obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
- obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
- obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
--obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o
-+obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
-+obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
-+obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
-+obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
-+obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
-+obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
---- a/arch/arm/mach-orion5x/addr-map.c
-+++ b/arch/arm/mach-orion5x/addr-map.c
-@@ -70,6 +70,7 @@
- 
- 
- struct mbus_dram_target_info orion5x_mbus_dram_info;
-+static int __initdata win_alloc_count;
- 
- static int __init orion5x_cpu_win_can_remap(int win)
- {
-@@ -87,16 +88,22 @@ static int __init orion5x_cpu_win_can_re
- static void __init setup_cpu_win(int win, u32 base, u32 size,
- 				 u8 target, u8 attr, int remap)
- {
--	orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000);
--	orion5x_write(CPU_WIN_CTRL(win),
--		((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1);
-+	if (win >= 8) {
-+		printk(KERN_ERR "setup_cpu_win: trying to allocate "
-+				"window %d\n", win);
-+		return;
-+	}
-+
-+	writel(base & 0xffff0000, CPU_WIN_BASE(win));
-+	writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1,
-+		CPU_WIN_CTRL(win));
- 
- 	if (orion5x_cpu_win_can_remap(win)) {
- 		if (remap < 0)
- 			remap = base;
- 
--		orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
--		orion5x_write(CPU_WIN_REMAP_HI(win), 0);
-+		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
-+		writel(0, CPU_WIN_REMAP_HI(win));
- 	}
- }
- 
-@@ -109,11 +116,11 @@ void __init orion5x_setup_cpu_mbus_bridg
- 	 * First, disable and clear windows.
- 	 */
- 	for (i = 0; i < 8; i++) {
--		orion5x_write(CPU_WIN_BASE(i), 0);
--		orion5x_write(CPU_WIN_CTRL(i), 0);
-+		writel(0, CPU_WIN_BASE(i));
-+		writel(0, CPU_WIN_CTRL(i));
- 		if (orion5x_cpu_win_can_remap(i)) {
--			orion5x_write(CPU_WIN_REMAP_LO(i), 0);
--			orion5x_write(CPU_WIN_REMAP_HI(i), 0);
-+			writel(0, CPU_WIN_REMAP_LO(i));
-+			writel(0, CPU_WIN_REMAP_HI(i));
- 		}
- 	}
- 
-@@ -128,6 +135,7 @@ void __init orion5x_setup_cpu_mbus_bridg
- 		TARGET_PCIE, ATTR_PCIE_MEM, -1);
- 	setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
- 		TARGET_PCI, ATTR_PCI_MEM, -1);
-+	win_alloc_count = 4;
- 
- 	/*
- 	 * Setup MBUS dram target info.
-@@ -147,8 +155,8 @@ void __init orion5x_setup_cpu_mbus_bridg
- 			w = &orion5x_mbus_dram_info.cs[cs++];
- 			w->cs_index = i;
- 			w->mbus_attr = 0xf & ~(1 << i);
--			w->base = base & 0xff000000;
--			w->size = (size | 0x00ffffff) + 1;
-+			w->base = base & 0xffff0000;
-+			w->size = (size | 0x0000ffff) + 1;
- 		}
- 	}
- 	orion5x_mbus_dram_info.num_cs = cs;
-@@ -156,25 +164,30 @@ void __init orion5x_setup_cpu_mbus_bridg
- 
- void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
- {
--	setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
-+	setup_cpu_win(win_alloc_count++, base, size,
-+		      TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
- }
- 
- void __init orion5x_setup_dev0_win(u32 base, u32 size)
- {
--	setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
-+	setup_cpu_win(win_alloc_count++, base, size,
-+		      TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
- }
- 
- void __init orion5x_setup_dev1_win(u32 base, u32 size)
- {
--	setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
-+	setup_cpu_win(win_alloc_count++, base, size,
-+		      TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
- }
- 
- void __init orion5x_setup_dev2_win(u32 base, u32 size)
- {
--	setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
-+	setup_cpu_win(win_alloc_count++, base, size,
-+		      TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
- }
- 
- void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
- {
--	setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
-+	setup_cpu_win(win_alloc_count++, base, size,
-+		      TARGET_PCIE, ATTR_PCIE_WA, -1);
- }
---- a/arch/arm/mach-orion5x/common.c
-+++ b/arch/arm/mach-orion5x/common.c
-@@ -39,25 +39,22 @@ static struct map_desc orion5x_io_desc[]
- 		.virtual	= ORION5X_REGS_VIRT_BASE,
- 		.pfn		= __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
- 		.length		= ORION5X_REGS_SIZE,
--		.type		= MT_DEVICE
--	},
--	{
-+		.type		= MT_DEVICE,
-+	}, {
- 		.virtual	= ORION5X_PCIE_IO_VIRT_BASE,
- 		.pfn		= __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
- 		.length		= ORION5X_PCIE_IO_SIZE,
--		.type		= MT_DEVICE
--	},
--	{
-+		.type		= MT_DEVICE,
-+	}, {
- 		.virtual	= ORION5X_PCI_IO_VIRT_BASE,
- 		.pfn		= __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
- 		.length		= ORION5X_PCI_IO_SIZE,
--		.type		= MT_DEVICE
--	},
--	{
-+		.type		= MT_DEVICE,
-+	}, {
- 		.virtual	= ORION5X_PCIE_WA_VIRT_BASE,
- 		.pfn		= __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
- 		.length		= ORION5X_PCIE_WA_SIZE,
--		.type		= MT_DEVICE
-+		.type		= MT_DEVICE,
- 	},
- };
- 
-@@ -66,101 +63,32 @@ void __init orion5x_map_io(void)
- 	iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
- }
- 
-+
- /*****************************************************************************
-- * UART
-+ * EHCI
-  ****************************************************************************/
--
--static struct resource orion5x_uart_resources[] = {
--	{
--		.start		= UART0_PHYS_BASE,
--		.end		= UART0_PHYS_BASE + 0xff,
--		.flags		= IORESOURCE_MEM,
--	},
--	{
--		.start		= IRQ_ORION5X_UART0,
--		.end		= IRQ_ORION5X_UART0,
--		.flags		= IORESOURCE_IRQ,
--	},
--	{
--		.start		= UART1_PHYS_BASE,
--		.end		= UART1_PHYS_BASE + 0xff,
--		.flags		= IORESOURCE_MEM,
--	},
--	{
--		.start		= IRQ_ORION5X_UART1,
--		.end		= IRQ_ORION5X_UART1,
--		.flags		= IORESOURCE_IRQ,
--	},
--};
--
--static struct plat_serial8250_port orion5x_uart_data[] = {
--	{
--		.mapbase	= UART0_PHYS_BASE,
--		.membase	= (char *)UART0_VIRT_BASE,
--		.irq		= IRQ_ORION5X_UART0,
--		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
--		.iotype		= UPIO_MEM,
--		.regshift	= 2,
--		.uartclk	= ORION5X_TCLK,
--	},
--	{
--		.mapbase	= UART1_PHYS_BASE,
--		.membase	= (char *)UART1_VIRT_BASE,
--		.irq		= IRQ_ORION5X_UART1,
--		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
--		.iotype		= UPIO_MEM,
--		.regshift	= 2,
--		.uartclk	= ORION5X_TCLK,
--	},
--	{ },
-+static struct orion_ehci_data orion5x_ehci_data = {
-+	.dram		= &orion5x_mbus_dram_info,
- };
- 
--static struct platform_device orion5x_uart = {
--	.name			= "serial8250",
--	.id			= PLAT8250_DEV_PLATFORM,
--	.dev			= {
--		.platform_data	= orion5x_uart_data,
--	},
--	.resource		= orion5x_uart_resources,
--	.num_resources		= ARRAY_SIZE(orion5x_uart_resources),
--};
-+static u64 ehci_dmamask = 0xffffffffUL;
- 
--/*******************************************************************************
-- * USB Controller - 2 interfaces
-- ******************************************************************************/
- 
-+/*****************************************************************************
-+ * EHCI0
-+ ****************************************************************************/
- static struct resource orion5x_ehci0_resources[] = {
- 	{
- 		.start	= ORION5X_USB0_PHYS_BASE,
- 		.end	= ORION5X_USB0_PHYS_BASE + SZ_4K - 1,
- 		.flags	= IORESOURCE_MEM,
--	},
--	{
-+	}, {
- 		.start	= IRQ_ORION5X_USB0_CTRL,
- 		.end	= IRQ_ORION5X_USB0_CTRL,
- 		.flags	= IORESOURCE_IRQ,
- 	},
- };
- 
--static struct resource orion5x_ehci1_resources[] = {
--	{
--		.start	= ORION5X_USB1_PHYS_BASE,
--		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
--		.flags	= IORESOURCE_MEM,
--	},
--	{
--		.start	= IRQ_ORION5X_USB1_CTRL,
--		.end	= IRQ_ORION5X_USB1_CTRL,
--		.flags	= IORESOURCE_IRQ,
--	},
--};
--
--static struct orion_ehci_data orion5x_ehci_data = {
--	.dram		= &orion5x_mbus_dram_info,
--};
--
--static u64 ehci_dmamask = 0xffffffffUL;
--
- static struct platform_device orion5x_ehci0 = {
- 	.name		= "orion-ehci",
- 	.id		= 0,
-@@ -173,6 +101,27 @@ static struct platform_device orion5x_eh
- 	.num_resources	= ARRAY_SIZE(orion5x_ehci0_resources),
- };
- 
-+void __init orion5x_ehci0_init(void)
-+{
-+	platform_device_register(&orion5x_ehci0);
-+}
-+
-+
-+/*****************************************************************************
-+ * EHCI1
-+ ****************************************************************************/
-+static struct resource orion5x_ehci1_resources[] = {
-+	{
-+		.start	= ORION5X_USB1_PHYS_BASE,
-+		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.start	= IRQ_ORION5X_USB1_CTRL,
-+		.end	= IRQ_ORION5X_USB1_CTRL,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
- static struct platform_device orion5x_ehci1 = {
- 	.name		= "orion-ehci",
- 	.id		= 1,
-@@ -185,11 +134,15 @@ static struct platform_device orion5x_eh
- 	.num_resources	= ARRAY_SIZE(orion5x_ehci1_resources),
- };
- 
-+void __init orion5x_ehci1_init(void)
-+{
-+	platform_device_register(&orion5x_ehci1);
-+}
-+
-+
- /*****************************************************************************
-- * Gigabit Ethernet port
-- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
-+ * GigE
-  ****************************************************************************/
--
- struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
- 	.dram		= &orion5x_mbus_dram_info,
- 	.t_clk		= ORION5X_TCLK,
-@@ -219,7 +172,7 @@ static struct resource orion5x_eth_resou
- 		.start	= IRQ_ORION5X_ETH_SUM,
- 		.end	= IRQ_ORION5X_ETH_SUM,
- 		.flags	= IORESOURCE_IRQ,
--	}
-+	},
- };
- 
- static struct platform_device orion5x_eth = {
-@@ -238,11 +191,10 @@ void __init orion5x_eth_init(struct mv64
- 	platform_device_register(&orion5x_eth);
- }
- 
-+
- /*****************************************************************************
-- * I2C controller
-- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
-+ * I2C
-  ****************************************************************************/
--
- static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
- 	.freq_m		= 8, /* assumes 166 MHz TCLK */
- 	.freq_n		= 3,
-@@ -251,16 +203,15 @@ static struct mv64xxx_i2c_pdata orion5x_
- 
- static struct resource orion5x_i2c_resources[] = {
- 	{
--		.name   = "i2c base",
--		.start  = I2C_PHYS_BASE,
--		.end    = I2C_PHYS_BASE + 0x20 -1,
--		.flags  = IORESOURCE_MEM,
--	},
--	{
--		.name   = "i2c irq",
--		.start  = IRQ_ORION5X_I2C,
--		.end    = IRQ_ORION5X_I2C,
--		.flags  = IORESOURCE_IRQ,
-+		.name	= "i2c base",
-+		.start	= I2C_PHYS_BASE,
-+		.end	= I2C_PHYS_BASE + 0x1f,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.name	= "i2c irq",
-+		.start	= IRQ_ORION5X_I2C,
-+		.end	= IRQ_ORION5X_I2C,
-+		.flags	= IORESOURCE_IRQ,
- 	},
- };
- 
-@@ -270,36 +221,41 @@ static struct platform_device orion5x_i2
- 	.num_resources	= ARRAY_SIZE(orion5x_i2c_resources),
- 	.resource	= orion5x_i2c_resources,
- 	.dev		= {
--		.platform_data = &orion5x_i2c_pdata,
-+		.platform_data	= &orion5x_i2c_pdata,
- 	},
- };
- 
-+void __init orion5x_i2c_init(void)
-+{
-+	platform_device_register(&orion5x_i2c);
-+}
-+
-+
- /*****************************************************************************
-- * Sata port
-+ * SATA
-  ****************************************************************************/
- static struct resource orion5x_sata_resources[] = {
--        {
--                .name   = "sata base",
--                .start  = ORION5X_SATA_PHYS_BASE,
--                .end    = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
--                .flags  = IORESOURCE_MEM,
--        },
- 	{
--                .name   = "sata irq",
--                .start  = IRQ_ORION5X_SATA,
--                .end    = IRQ_ORION5X_SATA,
--                .flags  = IORESOURCE_IRQ,
--        },
-+		.name	= "sata base",
-+		.start	= ORION5X_SATA_PHYS_BASE,
-+		.end	= ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
-+		.flags	= IORESOURCE_MEM,
-+	}, {
-+		.name	= "sata irq",
-+		.start	= IRQ_ORION5X_SATA,
-+		.end	= IRQ_ORION5X_SATA,
-+		.flags	= IORESOURCE_IRQ,
-+	},
- };
- 
- static struct platform_device orion5x_sata = {
--	.name           = "sata_mv",
--	.id             = 0,
-+	.name		= "sata_mv",
-+	.id		= 0,
- 	.dev		= {
- 		.coherent_dma_mask	= 0xffffffff,
- 	},
--	.num_resources  = ARRAY_SIZE(orion5x_sata_resources),
--	.resource       = orion5x_sata_resources,
-+	.num_resources	= ARRAY_SIZE(orion5x_sata_resources),
-+	.resource	= orion5x_sata_resources,
- };
- 
- void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
-@@ -309,23 +265,111 @@ void __init orion5x_sata_init(struct mv_
- 	platform_device_register(&orion5x_sata);
- }
- 
-+
- /*****************************************************************************
-- * Time handling
-+ * UART0
-+ ****************************************************************************/
-+static struct plat_serial8250_port orion5x_uart0_data[] = {
-+	{
-+		.mapbase	= UART0_PHYS_BASE,
-+		.membase	= (char *)UART0_VIRT_BASE,
-+		.irq		= IRQ_ORION5X_UART0,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= ORION5X_TCLK,
-+	}, {
-+	},
-+};
-+
-+static struct resource orion5x_uart0_resources[] = {
-+	{
-+		.start		= UART0_PHYS_BASE,
-+		.end		= UART0_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_ORION5X_UART0,
-+		.end		= IRQ_ORION5X_UART0,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device orion5x_uart0 = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= orion5x_uart0_data,
-+	},
-+	.resource		= orion5x_uart0_resources,
-+	.num_resources		= ARRAY_SIZE(orion5x_uart0_resources),
-+};
-+
-+void __init orion5x_uart0_init(void)
-+{
-+	platform_device_register(&orion5x_uart0);
-+}
-+
-+
-+/*****************************************************************************
-+ * UART1
-  ****************************************************************************/
-+static struct plat_serial8250_port orion5x_uart1_data[] = {
-+	{
-+		.mapbase	= UART1_PHYS_BASE,
-+		.membase	= (char *)UART1_VIRT_BASE,
-+		.irq		= IRQ_ORION5X_UART1,
-+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= ORION5X_TCLK,
-+	}, {
-+	},
-+};
-+
-+static struct resource orion5x_uart1_resources[] = {
-+	{
-+		.start		= UART1_PHYS_BASE,
-+		.end		= UART1_PHYS_BASE + 0xff,
-+		.flags		= IORESOURCE_MEM,
-+	}, {
-+		.start		= IRQ_ORION5X_UART1,
-+		.end		= IRQ_ORION5X_UART1,
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device orion5x_uart1 = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM1,
-+	.dev			= {
-+		.platform_data	= orion5x_uart1_data,
-+	},
-+	.resource		= orion5x_uart1_resources,
-+	.num_resources		= ARRAY_SIZE(orion5x_uart1_resources),
-+};
-+
-+void __init orion5x_uart1_init(void)
-+{
-+	platform_device_register(&orion5x_uart1);
-+}
-+
- 
-+/*****************************************************************************
-+ * Time handling
-+ ****************************************************************************/
- static void orion5x_timer_init(void)
- {
- 	orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
- }
- 
- struct sys_timer orion5x_timer = {
--        .init = orion5x_timer_init,
-+	.init = orion5x_timer_init,
- };
- 
-+
- /*****************************************************************************
-  * General
-  ****************************************************************************/
--
- /*
-  * Identify device ID and rev from PCIe configuration header space '0'.
-  */
-@@ -350,8 +394,10 @@ static void __init orion5x_id(u32 *dev, 
- 	} else if (*dev == MV88F5181_DEV_ID) {
- 		if (*rev == MV88F5181_REV_B1) {
- 			*dev_name = "MV88F5181-Rev-B1";
-+		} else if (*rev == MV88F5181L_REV_A1) {
-+			*dev_name = "MV88F5181L-Rev-A1";
- 		} else {
--			*dev_name = "MV88F5181-Rev-Unsupported";
-+			*dev_name = "MV88F5181(L)-Rev-Unsupported";
- 		}
- 	} else {
- 		*dev_name = "Device-Unknown";
-@@ -370,15 +416,6 @@ void __init orion5x_init(void)
- 	 * Setup Orion address map
- 	 */
- 	orion5x_setup_cpu_mbus_bridge();
--
--	/*
--	 * Register devices.
--	 */
--	platform_device_register(&orion5x_uart);
--	platform_device_register(&orion5x_ehci0);
--	if (dev == MV88F5182_DEV_ID)
--		platform_device_register(&orion5x_ehci1);
--	platform_device_register(&orion5x_i2c);
- }
- 
- /*
---- a/arch/arm/mach-orion5x/common.h
-+++ b/arch/arm/mach-orion5x/common.h
-@@ -1,10 +1,12 @@
- #ifndef __ARCH_ORION5X_COMMON_H
- #define __ARCH_ORION5X_COMMON_H
- 
-+struct mv643xx_eth_platform_data;
-+struct mv_sata_platform_data;
-+
- /*
-  * Basic Orion init functions used early by machine-setup.
-  */
--
- void orion5x_map_io(void);
- void orion5x_init_irq(void);
- void orion5x_init(void);
-@@ -23,13 +25,19 @@ void orion5x_setup_dev1_win(u32 base, u3
- void orion5x_setup_dev2_win(u32 base, u32 size);
- void orion5x_setup_pcie_wa_win(u32 base, u32 size);
- 
-+void orion5x_ehci0_init(void);
-+void orion5x_ehci1_init(void);
-+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-+void orion5x_i2c_init(void);
-+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
-+void orion5x_uart0_init(void);
-+void orion5x_uart1_init(void);
-+
- /*
-- * Shared code used internally by other Orion core functions.
-- * (/mach-orion/pci.c)
-+ * PCIe/PCI functions.
-  */
--
--struct pci_sys_data;
- struct pci_bus;
-+struct pci_sys_data;
- 
- void orion5x_pcie_id(u32 *dev, u32 *rev);
- int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
-@@ -40,26 +48,9 @@ int orion5x_pci_map_irq(struct pci_dev *
-  * Valid GPIO pins according to MPP setup, used by machine-setup.
-  * (/mach-orion/gpio.c).
-  */
--
--void orion5x_gpio_set_valid_pins(u32 pins);
-+void orion5x_gpio_set_valid(unsigned pin, int valid);
- void gpio_display(void);	/* debug */
- 
--/*
-- * Pull in Orion Ethernet platform_data, used by machine-setup
-- */
--
--struct mv643xx_eth_platform_data;
--
--void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
--
--/*
-- * Orion Sata platform_data, used by machine-setup
-- */
--
--struct mv_sata_platform_data;
--
--void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
--
- struct machine_desc;
- struct meminfo;
- struct tag;
---- a/arch/arm/mach-orion5x/db88f5281-setup.c
-+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
-@@ -27,6 +27,7 @@
- #include <asm/arch/orion5x.h>
- #include <asm/plat-orion/orion_nand.h>
- #include "common.h"
-+#include "mpp.h"
- 
- /*****************************************************************************
-  * DB-88F5281 on board devices
-@@ -86,7 +87,7 @@ static struct platform_device db88f5281_
- 	.name		= "physmap-flash",
- 	.id		= 0,
- 	.dev		= {
--		.platform_data = &db88f5281_boot_flash_data,
-+		.platform_data	= &db88f5281_boot_flash_data,
- 	},
- 	.num_resources	= 1,
- 	.resource	= &db88f5281_boot_flash_resource,
-@@ -110,7 +111,7 @@ static struct platform_device db88f5281_
- 	.name		= "physmap-flash",
- 	.id		= 1,
- 	.dev		= {
--		.platform_data = &db88f5281_nor_flash_data,
-+		.platform_data	= &db88f5281_nor_flash_data,
- 	},
- 	.num_resources	= 1,
- 	.resource	= &db88f5281_nor_flash_resource,
-@@ -125,18 +126,15 @@ static struct mtd_partition db88f5281_na
- 		.name = "kernel",
- 		.offset = 0,
- 		.size = SZ_2M,
--	},
--	{
-+	}, {
- 		.name = "root",
- 		.offset = SZ_2M,
- 		.size = (SZ_16M - SZ_2M),
--	},
--	{
-+	}, {
- 		.name = "user",
- 		.offset = SZ_16M,
- 		.size = SZ_8M,
--	},
--	{
-+	}, {
- 		.name = "recovery",
- 		.offset = (SZ_16M + SZ_8M),
- 		.size = SZ_8M,
-@@ -288,7 +286,6 @@ subsys_initcall(db88f5281_pci_init);
-  ****************************************************************************/
- static struct mv643xx_eth_platform_data db88f5281_eth_data = {
- 	.phy_addr	= 8,
--	.force_phy_addr = 1,
- };
- 
- /*****************************************************************************
-@@ -301,11 +298,28 @@ static struct i2c_board_info __initdata 
- /*****************************************************************************
-  * General Setup
-  ****************************************************************************/
--
--static struct platform_device *db88f5281_devs[] __initdata = {
--	&db88f5281_boot_flash,
--	&db88f5281_nor_flash,
--	&db88f5281_nand_flash,
-+static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = {
-+	{  0, MPP_GPIO },		/* USB Over Current */
-+	{  1, MPP_GPIO },		/* USB Vbat input */
-+	{  2, MPP_PCI_ARB },		/* PCI_REQn[2] */
-+	{  3, MPP_PCI_ARB },		/* PCI_GNTn[2] */
-+	{  4, MPP_PCI_ARB },		/* PCI_REQn[3] */
-+	{  5, MPP_PCI_ARB },		/* PCI_GNTn[3] */
-+	{  6, MPP_GPIO },		/* JP0, CON17.2 */
-+	{  7, MPP_GPIO },		/* JP1, CON17.1 */
-+	{  8, MPP_GPIO },		/* JP2, CON11.2 */
-+	{  9, MPP_GPIO },		/* JP3, CON11.3 */
-+	{ 10, MPP_GPIO },		/* RTC int */
-+	{ 11, MPP_GPIO },		/* Baud Rate Generator */
-+	{ 12, MPP_GPIO },		/* PCI int 1 */
-+	{ 13, MPP_GPIO },		/* PCI int 2 */
-+	{ 14, MPP_NAND },		/* NAND_REn[2] */
-+	{ 15, MPP_NAND },		/* NAND_WEn[2] */
-+	{ 16, MPP_UART },		/* UART1_RX */
-+	{ 17, MPP_UART },		/* UART1_TX */
-+	{ 18, MPP_UART },		/* UART1_CTSn */
-+	{ 19, MPP_UART },		/* UART1_RTSn */
-+	{ -1 },
- };
- 
- static void __init db88f5281_init(void)
-@@ -315,39 +329,31 @@ static void __init db88f5281_init(void)
- 	 */
- 	orion5x_init();
- 
-+	orion5x_mpp_conf(db88f5281_mpp_modes);
-+	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-+
- 	/*
--	 * Setup the CPU address decode windows for our on-board devices
-+	 * Configure peripherals.
- 	 */
-+	orion5x_ehci0_init();
-+	orion5x_eth_init(&db88f5281_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_uart0_init();
-+	orion5x_uart1_init();
-+
- 	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
- 				DB88F5281_NOR_BOOT_SIZE);
-+	platform_device_register(&db88f5281_boot_flash);
-+
- 	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
--	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
--	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
- 
--	/*
--	 * Setup Multiplexing Pins:
--	 * MPP0: GPIO (USB Over Current)	MPP1: GPIO (USB Vbat input)
--	 * MPP2: PCI_REQn[2]			MPP3: PCI_GNTn[2]
--	 * MPP4: PCI_REQn[3]			MPP5: PCI_GNTn[3]
--	 * MPP6: GPIO (JP0, CON17.2)		MPP7: GPIO (JP1, CON17.1)
--	 * MPP8: GPIO (JP2, CON11.2)		MPP9: GPIO (JP3, CON11.3)
--	 * MPP10: GPIO (RTC int)		MPP11: GPIO (Baud Rate Generator)
--	 * MPP12: GPIO (PCI int 1)		MPP13: GPIO (PCI int 2)
--	 * MPP14: NAND_REn[2]			MPP15: NAND_WEn[2]
--	 * MPP16: UART1_RX			MPP17: UART1_TX
--	 * MPP18: UART1_CTS			MPP19: UART1_RTS
--	 * MPP-DEV: DEV_D[16:31]
--	 */
--	orion5x_write(MPP_0_7_CTRL, 0x00222203);
--	orion5x_write(MPP_8_15_CTRL, 0x44000000);
--	orion5x_write(MPP_16_19_CTRL, 0);
--	orion5x_write(MPP_DEV_CTRL, 0);
-+	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
-+	platform_device_register(&db88f5281_nor_flash);
- 
--	orion5x_gpio_set_valid_pins(0x00003fc3);
-+	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
-+	platform_device_register(&db88f5281_nand_flash);
- 
--	platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
- 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
--	orion5x_eth_init(&db88f5281_eth_data);
- }
- 
- MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
---- a/arch/arm/mach-orion5x/dns323-setup.c
-+++ b/arch/arm/mach-orion5x/dns323-setup.c
-@@ -27,6 +27,7 @@
- #include <asm/mach/pci.h>
- #include <asm/arch/orion5x.h>
- #include "common.h"
-+#include "mpp.h"
- 
- #define DNS323_GPIO_LED_RIGHT_AMBER	1
- #define DNS323_GPIO_LED_LEFT_AMBER	2
-@@ -52,8 +53,6 @@ static int __init dns323_pci_map_irq(str
- 	if (irq != -1)
- 		return irq;
- 
--	pr_err("%s: requested mapping for unknown device\n", __func__);
--
- 	return -1;
- }
- 
-@@ -81,7 +80,6 @@ subsys_initcall(dns323_pci_init);
- 
- static struct mv643xx_eth_platform_data dns323_eth_data = {
- 	.phy_addr = 8,
--	.force_phy_addr = 1,
- };
- 
- /****************************************************************************
-@@ -119,7 +117,7 @@ static struct mtd_partition dns323_parti
- 		.name	= "u-boot",
- 		.size	= 0x00030000,
- 		.offset	= 0x007d0000,
--	}
-+	},
- };
- 
- static struct physmap_flash_data dns323_nor_flash_data = {
-@@ -137,7 +135,9 @@ static struct resource dns323_nor_flash_
- static struct platform_device dns323_nor_flash = {
- 	.name		= "physmap-flash",
- 	.id		= 0,
--	.dev		= { .platform_data = &dns323_nor_flash_data, },
-+	.dev		= {
-+		.platform_data	= &dns323_nor_flash_data,
-+	},
- 	.resource	= &dns323_nor_flash_resource,
- 	.num_resources	= 1,
- };
-@@ -170,7 +170,9 @@ static struct gpio_led_platform_data dns
- static struct platform_device dns323_gpio_leds = {
- 	.name		= "leds-gpio",
- 	.id		= -1,
--	.dev		= { .platform_data = &dns323_led_data, },
-+	.dev		= {
-+		.platform_data	= &dns323_led_data,
-+	},
- };
- 
- /****************************************************************************
-@@ -183,35 +185,53 @@ static struct gpio_keys_button dns323_bu
- 		.gpio		= DNS323_GPIO_KEY_RESET,
- 		.desc		= "Reset Button",
- 		.active_low	= 1,
--	},
--	{
-+	}, {
- 		.code		= KEY_POWER,
- 		.gpio		= DNS323_GPIO_KEY_POWER,
- 		.desc		= "Power Button",
- 		.active_low	= 1,
--	}
-+	},
- };
- 
- static struct gpio_keys_platform_data dns323_button_data = {
- 	.buttons	= dns323_buttons,
--	.nbuttons       = ARRAY_SIZE(dns323_buttons),
-+	.nbuttons	= ARRAY_SIZE(dns323_buttons),
- };
- 
- static struct platform_device dns323_button_device = {
- 	.name		= "gpio-keys",
- 	.id		= -1,
- 	.num_resources	= 0,
--	.dev		= { .platform_data  = &dns323_button_data, },
-+	.dev		= {
-+		.platform_data	= &dns323_button_data,
-+	},
- };
- 
- /****************************************************************************
-  * General Setup
-  */
--
--static struct platform_device *dns323_plat_devices[] __initdata = {
--	&dns323_nor_flash,
--	&dns323_gpio_leds,
--	&dns323_button_device,
-+static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
-+	{  0, MPP_PCIE_RST_OUTn },
-+	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
-+	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-+	{  3, MPP_UNUSED },
-+	{  4, MPP_GPIO },		/* power button LED */
-+	{  5, MPP_GPIO },		/* power button LED */
-+	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
-+	{  7, MPP_GPIO },		/* M41T80 nIRQ/OUT/SQW */
-+	{  8, MPP_GPIO },		/* triggers power off */
-+	{  9, MPP_GPIO },		/* power button switch */
-+	{ 10, MPP_GPIO },		/* reset button switch */
-+	{ 11, MPP_UNUSED },
-+	{ 12, MPP_UNUSED },
-+	{ 13, MPP_UNUSED },
-+	{ 14, MPP_UNUSED },
-+	{ 15, MPP_UNUSED },
-+	{ 16, MPP_UNUSED },
-+	{ 17, MPP_UNUSED },
-+	{ 18, MPP_UNUSED },
-+	{ 19, MPP_UNUSED },
-+	{ -1 },
- };
- 
- /*
-@@ -225,17 +245,15 @@ static struct platform_device *dns323_pl
- static struct i2c_board_info __initdata dns323_i2c_devices[] = {
- 	{
- 		I2C_BOARD_INFO("g760a", 0x3e),
--	},
- #if 0
- 	/* this entry requires the new-style driver model lm75 driver,
- 	 * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
--	{
-+	}, {
- 		I2C_BOARD_INFO("g751", 0x48),
--	},
- #endif
--	{
-+	}, {
- 		I2C_BOARD_INFO("m41t80", 0x68),
--	}
-+	},
- };
- 
- /* DNS-323 specific power off method */
-@@ -250,62 +268,35 @@ static void __init dns323_init(void)
- 	/* Setup basic Orion functions. Need to be called early. */
- 	orion5x_init();
- 
-+	orion5x_mpp_conf(dns323_mpp_modes);
-+	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	orion5x_eth_init(&dns323_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_uart0_init();
-+
- 	/* setup flash mapping
- 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
- 	 */
- 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
-+	platform_device_register(&dns323_nor_flash);
- 
--	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
--	 *
--	 * Open a special address decode windows for the PCIe WA.
--	 */
--	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
--				ORION5X_PCIE_WA_SIZE);
--
--	/* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
--	orion5x_write(MPP_0_7_CTRL, 0);
--	orion5x_write(MPP_8_15_CTRL, 0);
--	orion5x_write(MPP_16_19_CTRL, 0);
--	orion5x_write(MPP_DEV_CTRL, 0);
--
--	/* Define used GPIO pins
--
--	  GPIO Map:
--
--	  |  0 |     | PEX_RST_OUT (not controlled by GPIO)
--	  |  1 | Out | right amber LED (= sata ch0 LED)  (low-active)
--	  |  2 | Out | left  amber LED (= sata ch1 LED)  (low-active)
--	  |  3 | Out | //unknown//
--	  |  4 | Out | power button LED (low-active, together with pin #5)
--	  |  5 | Out | power button LED (low-active, together with pin #4)
--	  |  6 | In  | GMT G751-2f overtemp. shutdown signal (low-active)
--	  |  7 | In  | M41T80 nIRQ/OUT/SQW signal
--	  |  8 | Out | triggers power off (high-active)
--	  |  9 | In  | power button switch (low-active)
--	  | 10 | In  | reset button switch (low-active)
--	  | 11 | Out | //unknown//
--	  | 12 | Out | //unknown//
--	  | 13 | Out | //unknown//
--	  | 14 | Out | //unknown//
--	  | 15 | Out | //unknown//
--	*/
--	orion5x_gpio_set_valid_pins(0x07f6);
--
--	/* register dns323 specific power-off method */
--	if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
--	    || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
--		pr_err("DNS323: failed to setup power-off GPIO\n");
--
--	pm_power_off = dns323_power_off;
-+	platform_device_register(&dns323_gpio_leds);
- 
--	/* register flash and other platform devices */
--	platform_add_devices(dns323_plat_devices,
--			     ARRAY_SIZE(dns323_plat_devices));
-+	platform_device_register(&dns323_button_device);
- 
- 	i2c_register_board_info(0, dns323_i2c_devices,
- 				ARRAY_SIZE(dns323_i2c_devices));
- 
--	orion5x_eth_init(&dns323_eth_data);
-+	/* register dns323 specific power-off method */
-+	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-+	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-+		pr_err("DNS323: failed to setup power-off GPIO\n");
-+	pm_power_off = dns323_power_off;
- }
- 
- /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
---- a/arch/arm/mach-orion5x/gpio.c
-+++ b/arch/arm/mach-orion5x/gpio.c
-@@ -24,9 +24,12 @@ static DEFINE_SPINLOCK(gpio_lock);
- static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
- static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
- 
--void __init orion5x_gpio_set_valid_pins(u32 pins)
-+void __init orion5x_gpio_set_valid(unsigned pin, int valid)
- {
--	gpio_valid[0] = pins;
-+	if (valid)
-+		__set_bit(pin, gpio_valid);
-+	else
-+		__clear_bit(pin, gpio_valid);
- }
- 
- /*
-@@ -93,10 +96,10 @@ int gpio_get_value(unsigned pin)
- {
- 	int val, mask = 1 << pin;
- 
--	if (orion5x_read(GPIO_IO_CONF) & mask)
--		val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL);
-+	if (readl(GPIO_IO_CONF) & mask)
-+		val = readl(GPIO_DATA_IN) ^ readl(GPIO_IN_POL);
- 	else
--		val = orion5x_read(GPIO_OUT);
-+		val = readl(GPIO_OUT);
- 
- 	return val & mask;
- }
-@@ -188,39 +191,39 @@ void gpio_display(void)
- 			printk("GPIO, free\n");
- 		} else {
- 			printk("GPIO, used by %s, ", gpio_label[i]);
--			if (orion5x_read(GPIO_IO_CONF) & (1 << i)) {
-+			if (readl(GPIO_IO_CONF) & (1 << i)) {
- 				printk("input, active %s, level %s, edge %s\n",
--				((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
--				((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
--				((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
-+				((readl(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
-+				((readl(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
-+				((readl(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
- 			} else {
--				printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1);
-+				printk("output, val=%d\n", (readl(GPIO_OUT) >> i) & 1);
- 			}
- 		}
- 	}
- 
- 	printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
--				MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL));
-+				MPP_0_7_CTRL, readl(MPP_0_7_CTRL));
- 	printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
--				MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL));
-+				MPP_8_15_CTRL, readl(MPP_8_15_CTRL));
- 	printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
--				MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL));
-+				MPP_16_19_CTRL, readl(MPP_16_19_CTRL));
- 	printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
--				MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL));
-+				MPP_DEV_CTRL, readl(MPP_DEV_CTRL));
- 	printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
--				GPIO_OUT, orion5x_read(GPIO_OUT));
-+				GPIO_OUT, readl(GPIO_OUT));
- 	printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
--				GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF));
-+				GPIO_IO_CONF, readl(GPIO_IO_CONF));
- 	printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
--				GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN));
-+				GPIO_BLINK_EN, readl(GPIO_BLINK_EN));
- 	printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
--				GPIO_IN_POL, orion5x_read(GPIO_IN_POL));
-+				GPIO_IN_POL, readl(GPIO_IN_POL));
- 	printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
--				GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN));
-+				GPIO_DATA_IN, readl(GPIO_DATA_IN));
- 	printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
--				GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK));
-+				GPIO_LEVEL_MASK, readl(GPIO_LEVEL_MASK));
- 	printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
--				GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE));
-+				GPIO_EDGE_CAUSE, readl(GPIO_EDGE_CAUSE));
- 	printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
--				GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK));
-+				GPIO_EDGE_MASK, readl(GPIO_EDGE_MASK));
- }
---- a/arch/arm/mach-orion5x/irq.c
-+++ b/arch/arm/mach-orion5x/irq.c
-@@ -82,7 +82,7 @@ static int orion5x_gpio_set_irq_type(u32
- 	int pin = irq_to_gpio(irq);
- 	struct irq_desc *desc;
- 
--	if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
-+	if ((readl(GPIO_IO_CONF) & (1 << pin)) == 0) {
- 		printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
- 				"(irq %d, pin %d).\n", irq, pin);
- 		return -EINVAL;
-@@ -117,7 +117,7 @@ static int orion5x_gpio_set_irq_type(u32
- 		/*
- 		 * set initial polarity based on current input level
- 		 */
--		if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN))
-+		if ((readl(GPIO_IN_POL) ^ readl(GPIO_DATA_IN))
- 		    & (1 << pin))
- 			orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
- 		else
-@@ -149,8 +149,8 @@ static void orion5x_gpio_irq_handler(uns
- 
- 	BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
- 	offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
--	cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) |
--		(orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK));
-+	cause = (readl(GPIO_DATA_IN) & readl(GPIO_LEVEL_MASK)) |
-+		(readl(GPIO_EDGE_CAUSE) & readl(GPIO_EDGE_MASK));
- 
- 	for (pin = offs; pin < offs + 8; pin++) {
- 		if (cause & (1 << pin)) {
-@@ -158,9 +158,9 @@ static void orion5x_gpio_irq_handler(uns
- 			desc = irq_desc + irq;
- 			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
- 				/* Swap polarity (race with GPIO line) */
--				u32 polarity = orion5x_read(GPIO_IN_POL);
-+				u32 polarity = readl(GPIO_IN_POL);
- 				polarity ^= 1 << pin;
--				orion5x_write(GPIO_IN_POL, polarity);
-+				writel(polarity, GPIO_IN_POL);
- 			}
- 			desc_handle_irq(irq, desc);
- 		}
-@@ -175,9 +175,9 @@ static void __init orion5x_init_gpio_irq
- 	/*
- 	 * Mask and clear GPIO IRQ interrupts
- 	 */
--	orion5x_write(GPIO_LEVEL_MASK, 0x0);
--	orion5x_write(GPIO_EDGE_MASK, 0x0);
--	orion5x_write(GPIO_EDGE_CAUSE, 0x0);
-+	writel(0x0, GPIO_LEVEL_MASK);
-+	writel(0x0, GPIO_EDGE_MASK);
-+	writel(0x0, GPIO_EDGE_CAUSE);
- 
- 	/*
- 	 * Register chained level handlers for GPIO IRQs by default.
---- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
-+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
-@@ -13,10 +13,12 @@
- #include <linux/platform_device.h>
- #include <linux/pci.h>
- #include <linux/irq.h>
-+#include <linux/delay.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mtd/nand.h>
- #include <linux/mv643xx_eth.h>
- #include <linux/i2c.h>
-+#include <linux/serial_reg.h>
- #include <linux/ata_platform.h>
- #include <asm/mach-types.h>
- #include <asm/gpio.h>
-@@ -25,6 +27,7 @@
- #include <asm/arch/orion5x.h>
- #include <asm/plat-orion/orion_nand.h>
- #include "common.h"
-+#include "mpp.h"
- 
- /*****************************************************************************
-  * KUROBOX-PRO Info
-@@ -53,13 +56,11 @@ static struct mtd_partition kurobox_pro_
- 		.name	= "uImage",
- 		.offset	= 0,
- 		.size	= SZ_4M,
--	},
--	{
-+	}, {
- 		.name	= "rootfs",
- 		.offset	= SZ_4M,
- 		.size	= SZ_64M,
--	},
--	{
-+	}, {
- 		.name	= "extra",
- 		.offset	= SZ_4M + SZ_64M,
- 		.size	= SZ_256M - (SZ_4M + SZ_64M),
-@@ -132,8 +133,6 @@ static int __init kurobox_pro_pci_map_ir
- 	/*
- 	 * PCI isn't used on the Kuro
- 	 */
--	printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
--
- 	return -1;
- }
- 
-@@ -161,7 +160,6 @@ subsys_initcall(kurobox_pro_pci_init);
- 
- static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
- 	.phy_addr	= 8,
--	.force_phy_addr = 1,
- };
- 
- /*****************************************************************************
-@@ -175,12 +173,169 @@ static struct i2c_board_info __initdata 
-  * SATA
-  ****************************************************************************/
- static struct mv_sata_platform_data kurobox_pro_sata_data = {
--	.n_ports        = 2,
-+	.n_ports	= 2,
- };
- 
- /*****************************************************************************
-+ * Kurobox Pro specific power off method via UART1-attached microcontroller
-+ ****************************************************************************/
-+
-+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-+
-+static int kurobox_pro_miconread(unsigned char *buf, int count)
-+{
-+	int i;
-+	int timeout;
-+
-+	for (i = 0; i < count; i++) {
-+		timeout = 10;
-+
-+		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
-+			if (--timeout == 0)
-+				break;
-+			udelay(1000);
-+		}
-+
-+		if (timeout == 0)
-+			break;
-+		buf[i] = readl(UART1_REG(RX));
-+	}
-+
-+	/* return read bytes */
-+	return i;
-+}
-+
-+static int kurobox_pro_miconwrite(const unsigned char *buf, int count)
-+{
-+	int i = 0;
-+
-+	while (count--) {
-+		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
-+			barrier();
-+		writel(buf[i++], UART1_REG(TX));
-+	}
-+
-+	return 0;
-+}
-+
-+static int kurobox_pro_miconsend(const unsigned char *data, int count)
-+{
-+	int i;
-+	unsigned char checksum = 0;
-+	unsigned char recv_buf[40];
-+	unsigned char send_buf[40];
-+	unsigned char correct_ack[3];
-+	int retry = 2;
-+
-+	/* Generate checksum */
-+	for (i = 0; i < count; i++)
-+		checksum -=  data[i];
-+
-+	do {
-+		/* Send data */
-+		kurobox_pro_miconwrite(data, count);
-+
-+		/* send checksum */
-+		kurobox_pro_miconwrite(&checksum, 1);
-+
-+		if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
-+			printk(KERN_ERR ">%s: receive failed.\n", __func__);
-+
-+			/* send preamble to clear the receive buffer */
-+			memset(&send_buf, 0xff, sizeof(send_buf));
-+			kurobox_pro_miconwrite(send_buf, sizeof(send_buf));
-+
-+			/* make dummy reads */
-+			mdelay(100);
-+			kurobox_pro_miconread(recv_buf, sizeof(recv_buf));
-+		} else {
-+			/* Generate expected ack */
-+			correct_ack[0] = 0x01;
-+			correct_ack[1] = data[1];
-+			correct_ack[2] = 0x00;
-+
-+			/* checksum Check */
-+			if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
-+			     recv_buf[3]) & 0xFF) {
-+				printk(KERN_ERR ">%s: Checksum Error : "
-+					"Received data[%02x, %02x, %02x, %02x]"
-+					"\n", __func__, recv_buf[0],
-+					recv_buf[1], recv_buf[2], recv_buf[3]);
-+			} else {
-+				/* Check Received Data */
-+				if (correct_ack[0] == recv_buf[0] &&
-+				    correct_ack[1] == recv_buf[1] &&
-+				    correct_ack[2] == recv_buf[2]) {
-+					/* Interval for next command */
-+					mdelay(10);
-+
-+					/* Receive ACK */
-+					return 0;
-+				}
-+			}
-+			/* Received NAK or illegal Data */
-+			printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
-+					"Received\n", __func__);
-+		}
-+	} while (retry--);
-+
-+	/* Interval for next command */
-+	mdelay(10);
-+
-+	return -1;
-+}
-+
-+static void kurobox_pro_power_off(void)
-+{
-+	const unsigned char watchdogkill[]	= {0x01, 0x35, 0x00};
-+	const unsigned char shutdownwait[]	= {0x00, 0x0c};
-+	const unsigned char poweroff[]		= {0x00, 0x06};
-+	/* 38400 baud divisor */
-+	const unsigned divisor = ((ORION5X_TCLK + (8 * 38400)) / (16 * 38400));
-+
-+	pr_info("%s: triggering power-off...\n", __func__);
-+
-+	/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
-+	writel(0x83, UART1_REG(LCR));
-+	writel(divisor & 0xff, UART1_REG(DLL));
-+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-+	writel(0x1b, UART1_REG(LCR));
-+	writel(0x00, UART1_REG(IER));
-+	writel(0x07, UART1_REG(FCR));
-+	writel(0x00, UART1_REG(MCR));
-+
-+	/* Send the commands to shutdown the Kurobox Pro */
-+	kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ;
-+	kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ;
-+	kurobox_pro_miconsend(poweroff, sizeof(poweroff));
-+}
-+
-+/*****************************************************************************
-  * General Setup
-  ****************************************************************************/
-+static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = {
-+	{  0, MPP_UNUSED },
-+	{  1, MPP_UNUSED },
-+	{  2, MPP_GPIO },		/* GPIO Micon */
-+	{  3, MPP_GPIO },		/* GPIO Rtc */
-+	{  4, MPP_UNUSED },
-+	{  5, MPP_UNUSED },
-+	{  6, MPP_NAND },		/* NAND Flash REn */
-+	{  7, MPP_NAND },		/* NAND Flash WEn */
-+	{  8, MPP_UNUSED },
-+	{  9, MPP_UNUSED },
-+	{ 10, MPP_UNUSED },
-+	{ 11, MPP_UNUSED },
-+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
-+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
-+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
-+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
-+	{ 16, MPP_UART },		/* UART1 RXD */
-+	{ 17, MPP_UART },		/* UART1 TXD */
-+	{ 18, MPP_UART },		/* UART1 CTSn */
-+	{ 19, MPP_UART },		/* UART1 RTSn */
-+	{ -1 },
-+};
- 
- static void __init kurobox_pro_init(void)
- {
-@@ -189,46 +344,32 @@ static void __init kurobox_pro_init(void
- 	 */
- 	orion5x_init();
- 
--	/*
--	 * Setup the CPU address decode windows for our devices
--	 */
--	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
--				KUROBOX_PRO_NOR_BOOT_SIZE);
--	orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
-+	orion5x_mpp_conf(kurobox_pro_mpp_modes);
- 
- 	/*
--	 * Open a special address decode windows for the PCIe WA.
-+	 * Configure peripherals.
- 	 */
--	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
--				ORION5X_PCIE_WA_SIZE);
--
--	/*
--	 * Setup Multiplexing Pins --
--	 * MPP[0-1] Not used
--	 * MPP[2] GPIO Micon
--	 * MPP[3] GPIO RTC
--	 * MPP[4-5] Not used
--	 * MPP[6] Nand Flash REn
--	 * MPP[7] Nand Flash WEn
--	 * MPP[8-11] Not used
--	 * MPP[12] SATA 0 presence Indication
--	 * MPP[13] SATA 1 presence Indication
--	 * MPP[14] SATA 0 active Indication
--	 * MPP[15] SATA 1 active indication
--	 * MPP[16-19] Not used
--	 */
--	orion5x_write(MPP_0_7_CTRL, 0x44220003);
--	orion5x_write(MPP_8_15_CTRL, 0x55550000);
--	orion5x_write(MPP_16_19_CTRL, 0x0);
--
--	orion5x_gpio_set_valid_pins(0x0000000c);
-+	orion5x_ehci0_init();
-+	orion5x_ehci1_init();
-+	orion5x_eth_init(&kurobox_pro_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_sata_init(&kurobox_pro_sata_data);
-+	orion5x_uart0_init();
- 
-+	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
-+				   KUROBOX_PRO_NOR_BOOT_SIZE);
- 	platform_device_register(&kurobox_pro_nor_flash);
--	if (machine_is_kurobox_pro())
-+
-+	if (machine_is_kurobox_pro()) {
-+		orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
-+				       KUROBOX_PRO_NAND_SIZE);
- 		platform_device_register(&kurobox_pro_nand_flash);
-+	}
-+
- 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
--	orion5x_eth_init(&kurobox_pro_eth_data);
--	orion5x_sata_init(&kurobox_pro_sata_data);
-+
-+	/* register Kurobox Pro specific power-off method */
-+	pm_power_off = kurobox_pro_power_off;
- }
- 
- #ifdef CONFIG_MACH_KUROBOX_PRO
---- /dev/null
-+++ b/arch/arm/mach-orion5x/mpp.c
-@@ -0,0 +1,163 @@
-+/*
-+ * arch/arm/mach-orion5x/mpp.c
-+ *
-+ * MPP functions for Marvell Orion 5x SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mbus.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+static int is_5181l(void)
-+{
-+	u32 dev;
-+	u32 rev;
-+
-+	orion5x_pcie_id(&dev, &rev);
-+
-+	return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0);
-+}
-+
-+static int is_5182(void)
-+{
-+	u32 dev;
-+	u32 rev;
-+
-+	orion5x_pcie_id(&dev, &rev);
-+
-+	return !!(dev == MV88F5182_DEV_ID);
-+}
-+
-+static int is_5281(void)
-+{
-+	u32 dev;
-+	u32 rev;
-+
-+	orion5x_pcie_id(&dev, &rev);
-+
-+	return !!(dev == MV88F5281_DEV_ID);
-+}
-+
-+static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type)
-+{
-+	switch (type) {
-+	case MPP_UNUSED:
-+	case MPP_GPIO:
-+		if (mpp == 0)
-+			return 3;
-+		if (mpp >= 1 && mpp <= 15)
-+			return 0;
-+		if (mpp >= 16 && mpp <= 19) {
-+			if (is_5182())
-+				return 5;
-+			if (type == MPP_UNUSED)
-+				return 0;
-+		}
-+		return -1;
-+
-+	case MPP_PCIE_RST_OUTn:
-+		if (mpp == 0)
-+			return 0;
-+		return -1;
-+
-+	case MPP_PCI_ARB:
-+		if (mpp >= 0 && mpp <= 7)
-+			return 2;
-+		return -1;
-+
-+	case MPP_PCI_PMEn:
-+		if (mpp == 2)
-+			return 3;
-+		return -1;
-+
-+	case MPP_GIGE:
-+		if (mpp >= 8 && mpp <= 19)
-+			return 1;
-+		return -1;
-+
-+	case MPP_NAND:
-+		if (is_5182() || is_5281()) {
-+			if (mpp >= 4 && mpp <= 7)
-+				return 4;
-+			if (mpp >= 12 && mpp <= 17)
-+				return 4;
-+		}
-+		return -1;
-+
-+	case MPP_PCI_CLK:
-+		if (is_5181l() && mpp >= 6 && mpp <= 7)
-+			return 5;
-+		return -1;
-+
-+	case MPP_SATA_LED:
-+		if (is_5182()) {
-+			if (mpp >= 4 && mpp <= 7)
-+				return 5;
-+			if (mpp >= 12 && mpp <= 15)
-+				return 5;
-+		}
-+		return -1;
-+
-+	case MPP_UART:
-+		if (mpp >= 16 && mpp <= 19)
-+			return 0;
-+		return -1;
-+	}
-+
-+	printk(KERN_INFO "unknown MPP type %d\n", type);
-+
-+	return -1;
-+}
-+
-+void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
-+{
-+	u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL);
-+	u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
-+	u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
-+
-+	while (mode->mpp >= 0) {
-+		u32 *reg;
-+		int num_type;
-+		int shift;
-+
-+		if (mode->mpp >= 0 && mode->mpp <= 7)
-+			reg = &mpp_0_7_ctrl;
-+		else if (mode->mpp >= 8 && mode->mpp <= 15)
-+			reg = &mpp_8_15_ctrl;
-+		else if (mode->mpp >= 16 && mode->mpp <= 19)
-+			reg = &mpp_16_19_ctrl;
-+		else {
-+			printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
-+					"(%d)\n", mode->mpp);
-+			continue;
-+		}
-+
-+		num_type = determine_type_encoding(mode->mpp, mode->type);
-+		if (num_type < 0) {
-+			printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
-+					"combination (%d, %d)\n", mode->mpp,
-+					mode->type);
-+			continue;
-+		}
-+
-+		shift = (mode->mpp & 7) << 2;
-+		*reg &= ~(0xf << shift);
-+		*reg |= (num_type & 0xf) << shift;
-+
-+		orion5x_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-+
-+		mode++;
-+	}
-+
-+	writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
-+	writel(mpp_8_15_ctrl, MPP_8_15_CTRL);
-+	writel(mpp_16_19_ctrl, MPP_16_19_CTRL);
-+}
---- /dev/null
-+++ b/arch/arm/mach-orion5x/mpp.h
-@@ -0,0 +1,74 @@
-+#ifndef __ARCH_ORION5X_MPP_H
-+#define __ARCH_ORION5X_MPP_H
-+
-+enum orion5x_mpp_type {
-+	/*
-+	 * This MPP is unused.
-+	 */
-+	MPP_UNUSED,
-+
-+	/*
-+	 * This MPP pin is used as a generic GPIO pin.  Valid for
-+	 * MPPs 0-15 and device bus data pins 16-31.  On 5182, also
-+	 * valid for MPPs 16-19.
-+	 */
-+	MPP_GPIO,
-+
-+	/*
-+	 * This MPP is used as PCIe_RST_OUTn pin.  Valid for
-+	 * MPP 0 only.
-+	 */
-+	MPP_PCIE_RST_OUTn,
-+
-+	/*
-+	 * This MPP is used as PCI arbiter pin (REQn/GNTn).
-+	 * Valid for MPPs 0-7 only.
-+	 */
-+	MPP_PCI_ARB,
-+
-+	/*
-+	 * This MPP is used as PCI_PMEn pin.  Valid for MPP 2 only.
-+	 */
-+	MPP_PCI_PMEn,
-+
-+	/*
-+	 * This MPP is used as GigE half-duplex (COL, CRS) or GMII
-+	 * (RXERR, CRS, TXERR, TXD[7:4], RXD[7:4]) pin.  Valid for
-+	 * MPPs 8-19 only.
-+	 */
-+	MPP_GIGE,
-+
-+	/*
-+	 * This MPP is used as NAND REn/WEn pin.  Valid for MPPs
-+	 * 4-7 and 12-17 only, and only on the 5181l/5182/5281.
-+	 */
-+	MPP_NAND,
-+
-+	/*
-+	 * This MPP is used as a PCI clock output pin.  Valid for
-+	 * MPPs 6-7 only, and only on the 5181l.
-+	 */
-+	MPP_PCI_CLK,
-+
-+	/*
-+	 * This MPP is used as a SATA presence/activity LED.
-+	 * Valid for MPPs 4-7 and 12-15 only, and only on the 5182.
-+	 */
-+	MPP_SATA_LED,
-+
-+	/*
-+	 * This MPP is used as UART1 RXD/TXD/CTSn/RTSn pin.
-+	 * Valid for MPPs 16-19 only.
-+	 */
-+	MPP_UART,
-+};
-+
-+struct orion5x_mpp_mode {
-+	int			mpp;
-+	enum orion5x_mpp_type	type;
-+};
-+
-+void orion5x_mpp_conf(struct orion5x_mpp_mode *mode);
-+
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-orion5x/mss2-setup.c
-@@ -0,0 +1,270 @@
-+/*
-+ * Maxtor Shared Storage II Board Setup
-+ *
-+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/i2c.h>
-+#include <linux/ata_platform.h>
-+#include <linux/gpio.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include <asm/arch/orion5x.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+#define MSS2_NOR_BOOT_BASE	0xff800000
-+#define MSS2_NOR_BOOT_SIZE	SZ_256K
-+
-+/*****************************************************************************
-+ * Maxtor Shared Storage II Info
-+ ****************************************************************************/
-+
-+/*
-+ * Maxtor Shared Storage II hardware :
-+ * - Marvell 88F5182-A2 C500
-+ * - Marvell 88E1111 Gigabit Ethernet PHY
-+ * - RTC M41T81 (@0x68) on I2C bus
-+ * - 256KB NOR flash
-+ * - 64MB of RAM
-+ */
-+
-+/*****************************************************************************
-+ * 256KB NOR Flash on BOOT Device
-+ ****************************************************************************/
-+
-+static struct physmap_flash_data mss2_nor_flash_data = {
-+	.width		= 1,
-+};
-+
-+static struct resource mss2_nor_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= MSS2_NOR_BOOT_BASE,
-+	.end		= MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device mss2_nor_flash = {
-+	.name		= "physmap-flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &mss2_nor_flash_data,
-+	},
-+	.resource	= &mss2_nor_flash_resource,
-+	.num_resources	= 1,
-+};
-+
-+/****************************************************************************
-+ * PCI setup
-+ ****************************************************************************/
-+static int __init mss2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	int irq;
-+
-+	/*
-+	 * Check for devices with hard-wired IRQs.
-+	 */
-+	irq = orion5x_pci_map_irq(dev, slot, pin);
-+	if (irq != -1)
-+		return irq;
-+
-+	return -1;
-+}
-+
-+static struct hw_pci mss2_pci __initdata = {
-+	.nr_controllers = 2,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= orion5x_pci_sys_setup,
-+	.scan		= orion5x_pci_sys_scan_bus,
-+	.map_irq	= mss2_pci_map_irq,
-+};
-+
-+static int __init mss2_pci_init(void)
-+{
-+	if (machine_is_mss2())
-+		pci_common_init(&mss2_pci);
-+
-+	return 0;
-+}
-+subsys_initcall(mss2_pci_init);
-+
-+
-+/*****************************************************************************
-+ * Ethernet
-+ ****************************************************************************/
-+
-+static struct mv643xx_eth_platform_data mss2_eth_data = {
-+	.phy_addr	= 8,
-+};
-+
-+/*****************************************************************************
-+ * SATA
-+ ****************************************************************************/
-+
-+static struct mv_sata_platform_data mss2_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+/*****************************************************************************
-+ * GPIO buttons
-+ ****************************************************************************/
-+
-+#define MSS2_GPIO_KEY_RESET	12
-+#define MSS2_GPIO_KEY_POWER	11
-+
-+static struct gpio_keys_button mss2_buttons[] = {
-+	{
-+		.code		= KEY_POWER,
-+		.gpio		= MSS2_GPIO_KEY_POWER,
-+		.desc		= "Power",
-+		.active_low	= 1,
-+	}, {
-+		.code		= KEY_RESTART,
-+		.gpio		= MSS2_GPIO_KEY_RESET,
-+		.desc		= "Reset",
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data mss2_button_data = {
-+	.buttons	= mss2_buttons,
-+	.nbuttons	= ARRAY_SIZE(mss2_buttons),
-+};
-+
-+static struct platform_device mss2_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data	= &mss2_button_data,
-+	},
-+};
-+
-+/*****************************************************************************
-+ * RTC m41t81 on I2C bus
-+ ****************************************************************************/
-+
-+#define MSS2_GPIO_RTC_IRQ	3
-+
-+static struct i2c_board_info __initdata mss2_i2c_rtc = {
-+	I2C_BOARD_INFO("m41t81", 0x68),
-+};
-+
-+/*****************************************************************************
-+ * MSS2 power off method
-+ ****************************************************************************/
-+/*
-+ * On the Maxtor Shared Storage II, the shutdown process is the following :
-+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
-+ * - The board reboots
-+ * - U-boot starts and go into an idle mode until the user press "power"
-+ */
-+static void mss2_power_off(void)
-+{
-+	u32 reg;
-+
-+	/*
-+	 * Enable and issue soft reset
-+	 */
-+	reg = readl(CPU_RESET_MASK);
-+	reg |= 1 << 2;
-+	writel(reg, CPU_RESET_MASK);
-+
-+	reg = readl(CPU_SOFT_RESET);
-+	reg |= 1;
-+	writel(reg, CPU_SOFT_RESET);
-+}
-+
-+/****************************************************************************
-+ * General Setup
-+ ****************************************************************************/
-+static struct orion5x_mpp_mode mss2_mpp_modes[] __initdata = {
-+	{  0, MPP_GPIO },		/* Power LED */
-+	{  1, MPP_GPIO },		/* Error LED */
-+	{  2, MPP_UNUSED },
-+	{  3, MPP_GPIO },		/* RTC interrupt */
-+	{  4, MPP_GPIO },		/* HDD ind. (Single/Dual)*/
-+	{  5, MPP_GPIO },		/* HD0 5V control */
-+	{  6, MPP_GPIO },		/* HD0 12V control */
-+	{  7, MPP_GPIO },		/* HD1 5V control */
-+	{  8, MPP_GPIO },		/* HD1 12V control */
-+	{  9, MPP_UNUSED },
-+	{ 10, MPP_GPIO },		/* Fan control */
-+	{ 11, MPP_GPIO },		/* Power button */
-+	{ 12, MPP_GPIO },		/* Reset button */
-+	{ 13, MPP_UNUSED },
-+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
-+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
-+	{ 16, MPP_UNUSED },
-+	{ 17, MPP_UNUSED },
-+	{ 18, MPP_UNUSED },
-+	{ 19, MPP_UNUSED },
-+	{ -1 },
-+};
-+
-+static void __init mss2_init(void)
-+{
-+	/* Setup basic Orion functions. Need to be called early. */
-+	orion5x_init();
-+
-+	orion5x_mpp_conf(mss2_mpp_modes);
-+
-+	/*
-+	 * MPP[20] Unused
-+	 * MPP[21] PCI clock
-+	 * MPP[22] USB 0 over current
-+	 * MPP[23] USB 1 over current
-+	 */
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	orion5x_ehci1_init();
-+	orion5x_eth_init(&mss2_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_sata_init(&mss2_sata_data);
-+	orion5x_uart0_init();
-+
-+	orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
-+	platform_device_register(&mss2_nor_flash);
-+
-+	platform_device_register(&mss2_button_device);
-+
-+	if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
-+		if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
-+			mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
-+		else
-+			gpio_free(MSS2_GPIO_RTC_IRQ);
-+	}
-+	i2c_register_board_info(0, &mss2_i2c_rtc, 1);
-+
-+	/* register mss2 specific power-off method */
-+	pm_power_off = mss2_power_off;
-+}
-+
-+MACHINE_START(MSS2, "Maxtor Shared Storage II")
-+	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-+	.phys_io	= ORION5X_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= mss2_init,
-+	.map_io		= orion5x_map_io,
-+	.init_irq	= orion5x_init_irq,
-+	.timer		= &orion5x_timer,
-+	.fixup		= tag_fixup_mem32
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-orion5x/mv2120-setup.c
-@@ -0,0 +1,194 @@
-+/*
-+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
-+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU Lesser General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/i2c.h>
-+#include <linux/ata_platform.h>
-+#include <asm/mach-types.h>
-+#include <asm/gpio.h>
-+#include <asm/mach/arch.h>
-+#include <asm/arch/orion5x.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+#define MV2120_NOR_BOOT_BASE	0xf4000000
-+#define MV2120_NOR_BOOT_SIZE	SZ_512K
-+
-+#define MV2120_GPIO_RTC_IRQ	3
-+#define MV2120_GPIO_KEY_RESET	17
-+#define MV2120_GPIO_KEY_POWER	18
-+#define MV2120_GPIO_POWER_OFF	19
-+
-+
-+/*****************************************************************************
-+ * Ethernet
-+ ****************************************************************************/
-+static struct mv643xx_eth_platform_data mv2120_eth_data = {
-+	.phy_addr	= 8,
-+};
-+
-+static struct mv_sata_platform_data mv2120_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+static struct mtd_partition mv2120_partitions[] = {
-+	{
-+		.name	= "firmware",
-+		.size	= 0x00080000,
-+		.offset	= 0,
-+	},
-+};
-+
-+static struct physmap_flash_data mv2120_nor_flash_data = {
-+	.width		= 1,
-+	.parts		= mv2120_partitions,
-+	.nr_parts	= ARRAY_SIZE(mv2120_partitions)
-+};
-+
-+static struct resource mv2120_nor_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= MV2120_NOR_BOOT_BASE,
-+	.end		= MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device mv2120_nor_flash = {
-+	.name		= "physmap-flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &mv2120_nor_flash_data,
-+	},
-+	.resource	= &mv2120_nor_flash_resource,
-+	.num_resources	= 1,
-+};
-+
-+static struct gpio_keys_button mv2120_buttons[] = {
-+	{
-+		.code		= KEY_RESTART,
-+		.gpio		= MV2120_GPIO_KEY_RESET,
-+		.desc		= "reset",
-+		.active_low	= 1,
-+	}, {
-+		.code		= KEY_POWER,
-+		.gpio		= MV2120_GPIO_KEY_POWER,
-+		.desc		= "power",
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data mv2120_button_data = {
-+	.buttons	= mv2120_buttons,
-+	.nbuttons	= ARRAY_SIZE(mv2120_buttons),
-+};
-+
-+static struct platform_device mv2120_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev		= {
-+		.platform_data	= &mv2120_button_data,
-+	},
-+};
-+
-+
-+/****************************************************************************
-+ * General Setup
-+ ****************************************************************************/
-+static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = {
-+	{  0, MPP_GPIO },		/* Sys status LED */
-+	{  1, MPP_GPIO },		/* Sys error LED */
-+	{  2, MPP_GPIO },		/* OverTemp interrupt */
-+	{  3, MPP_GPIO },		/* RTC interrupt */
-+	{  4, MPP_GPIO },		/* V_LED 5V */
-+	{  5, MPP_GPIO },		/* V_LED 3.3V */
-+	{  6, MPP_UNUSED },
-+	{  7, MPP_UNUSED },
-+	{  8, MPP_GPIO },		/* SATA 0 fail LED */
-+	{  9, MPP_GPIO },		/* SATA 1 fail LED */
-+	{ 10, MPP_UNUSED },
-+	{ 11, MPP_UNUSED },
-+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
-+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
-+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
-+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
-+	{ 16, MPP_UNUSED },
-+	{ 17, MPP_GPIO },		/* Reset button */
-+	{ 18, MPP_GPIO },		/* Power button */
-+	{ 19, MPP_GPIO },		/* Power off */
-+	{ -1 },
-+};
-+
-+static struct i2c_board_info __initdata mv2120_i2c_rtc = {
-+	I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-+	.irq	= 0,
-+};
-+
-+static void mv2120_power_off(void)
-+{
-+	pr_info("%s: triggering power-off...\n", __func__);
-+	gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
-+}
-+
-+static void __init mv2120_init(void)
-+{
-+	/* Setup basic Orion functions. Need to be called early. */
-+	orion5x_init();
-+
-+	orion5x_mpp_conf(mv2120_mpp_modes);
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	orion5x_ehci1_init();
-+	orion5x_eth_init(&mv2120_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_sata_init(&mv2120_sata_data);
-+	orion5x_uart0_init();
-+
-+	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
-+	platform_device_register(&mv2120_nor_flash);
-+
-+	platform_device_register(&mv2120_button_device);
-+
-+	if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
-+		if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
-+			mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
-+		else
-+			gpio_free(MV2120_GPIO_RTC_IRQ);
-+	}
-+	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
-+
-+	/* register mv2120 specific power-off method */
-+	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-+	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
-+		pr_err("mv2120: failed to setup power-off GPIO\n");
-+	pm_power_off = mv2120_power_off;
-+}
-+
-+/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
-+MACHINE_START(MV2120, "HP Media Vault mv2120")
-+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-+	.phys_io	= ORION5X_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= mv2120_init,
-+	.map_io		= orion5x_map_io,
-+	.init_irq	= orion5x_init_irq,
-+	.timer		= &orion5x_timer,
-+	.fixup		= tag_fixup_mem32
-+MACHINE_END
---- a/arch/arm/mach-orion5x/pci.c
-+++ b/arch/arm/mach-orion5x/pci.c
-@@ -152,6 +152,8 @@ static int __init pcie_setup(struct pci_
- 	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
- 		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
- 				   "read transaction workaround\n");
-+		orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-+					  ORION5X_PCIE_WA_SIZE);
- 		pcie_ops.read = pcie_rd_conf_wa;
- 	}
- 
-@@ -240,13 +242,13 @@ static int __init pcie_setup(struct pci_
-  * PCI Address Decode Windows registers
-  */
- #define PCI_BAR_SIZE_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
--				((n) == 1) ? ORION5X_PCI_REG(0xd08) :  \
--				((n) == 2) ? ORION5X_PCI_REG(0xc0c) :  \
--				((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
--#define PCI_BAR_REMAP_DDR_CS(n)	(((n) ==0) ? ORION5X_PCI_REG(0xc48) :  \
--				((n) == 1) ? ORION5X_PCI_REG(0xd48) :  \
--				((n) == 2) ? ORION5X_PCI_REG(0xc4c) :  \
--				((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
-+				 ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
-+				 ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
-+				 ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
-+#define PCI_BAR_REMAP_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc48) : \
-+				 ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
-+				 ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
-+				 ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
- #define PCI_BAR_ENABLE		ORION5X_PCI_REG(0xc3c)
- #define PCI_ADDR_DECODE_CTRL	ORION5X_PCI_REG(0xd3c)
- 
-@@ -266,7 +268,7 @@ static DEFINE_SPINLOCK(orion5x_pci_lock)
- 
- static int orion5x_pci_local_bus_nr(void)
- {
--	u32 conf = orion5x_read(PCI_P2P_CONF);
-+	u32 conf = readl(PCI_P2P_CONF);
- 	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
- }
- 
-@@ -276,11 +278,11 @@ static int orion5x_pci_hw_rd_conf(int bu
- 	unsigned long flags;
- 	spin_lock_irqsave(&orion5x_pci_lock, flags);
- 
--	orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
--			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
--			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
-+	writel(PCI_CONF_BUS(bus) |
-+		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-+		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
- 
--	*val = orion5x_read(PCI_CONF_DATA);
-+	*val = readl(PCI_CONF_DATA);
- 
- 	if (size == 1)
- 		*val = (*val >> (8*(where & 0x3))) & 0xff;
-@@ -300,9 +302,9 @@ static int orion5x_pci_hw_wr_conf(int bu
- 
- 	spin_lock_irqsave(&orion5x_pci_lock, flags);
- 
--	orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
--			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
--			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
-+	writel(PCI_CONF_BUS(bus) |
-+		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-+		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
- 
- 	if (size == 4) {
- 		__raw_writel(val, PCI_CONF_DATA);
-@@ -353,9 +355,9 @@ static struct pci_ops pci_ops = {
- 
- static void __init orion5x_pci_set_bus_nr(int nr)
- {
--	u32 p2p = orion5x_read(PCI_P2P_CONF);
-+	u32 p2p = readl(PCI_P2P_CONF);
- 
--	if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) {
-+	if (readl(PCI_MODE) & PCI_MODE_PCIX) {
- 		/*
- 		 * PCI-X mode
- 		 */
-@@ -372,7 +374,7 @@ static void __init orion5x_pci_set_bus_n
- 		 */
- 		p2p &= ~PCI_P2P_BUS_MASK;
- 		p2p |= (nr << PCI_P2P_BUS_OFFS);
--		orion5x_write(PCI_P2P_CONF, p2p);
-+		writel(p2p, PCI_P2P_CONF);
- 	}
- }
- 
-@@ -399,7 +401,7 @@ static void __init orion5x_setup_pci_win
- 	 * First, disable windows.
- 	 */
- 	win_enable = 0xffffffff;
--	orion5x_write(PCI_BAR_ENABLE, win_enable);
-+	writel(win_enable, PCI_BAR_ENABLE);
- 
- 	/*
- 	 * Setup windows for DDR banks.
-@@ -425,10 +427,10 @@ static void __init orion5x_setup_pci_win
- 		 */
- 		reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
- 		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
--		orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index),
--				(cs->size - 1) & 0xfffff000);
--		orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index),
--				cs->base & 0xfffff000);
-+		writel((cs->size - 1) & 0xfffff000,
-+			PCI_BAR_SIZE_DDR_CS(cs->cs_index));
-+		writel(cs->base & 0xfffff000,
-+			PCI_BAR_REMAP_DDR_CS(cs->cs_index));
- 
- 		/*
- 		 * Enable decode window for this chip select.
-@@ -439,7 +441,7 @@ static void __init orion5x_setup_pci_win
- 	/*
- 	 * Re-enable decode windows.
- 	 */
--	orion5x_write(PCI_BAR_ENABLE, win_enable);
-+	writel(win_enable, PCI_BAR_ENABLE);
- 
- 	/*
- 	 * Disable automatic update of address remaping when writing to BARs.
---- a/arch/arm/mach-orion5x/rd88f5182-setup.c
-+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
-@@ -26,6 +26,7 @@
- #include <asm/mach/pci.h>
- #include <asm/arch/orion5x.h>
- #include "common.h"
-+#include "mpp.h"
- 
- /*****************************************************************************
-  * RD-88F5182 Info
-@@ -125,6 +126,7 @@ static int __init rd88f5182_dbgled_init(
- 
- 		leds_event = rd88f5182_dbgled_event;
- 	}
-+
- 	return 0;
- }
- 
-@@ -220,7 +222,6 @@ subsys_initcall(rd88f5182_pci_init);
- 
- static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
- 	.phy_addr	= 8,
--	.force_phy_addr = 1,
- };
- 
- /*****************************************************************************
-@@ -234,15 +235,34 @@ static struct i2c_board_info __initdata 
-  * Sata
-  ****************************************************************************/
- static struct mv_sata_platform_data rd88f5182_sata_data = {
--	.n_ports        = 2,
-+	.n_ports	= 2,
- };
- 
- /*****************************************************************************
-  * General Setup
-  ****************************************************************************/
--
--static struct platform_device *rd88f5182_devices[] __initdata = {
--	&rd88f5182_nor_flash,
-+static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = {
-+	{  0, MPP_GPIO },		/* Debug Led */
-+	{  1, MPP_GPIO },		/* Reset Switch */
-+	{  2, MPP_UNUSED },
-+	{  3, MPP_GPIO },		/* RTC Int */
-+	{  4, MPP_GPIO },
-+	{  5, MPP_GPIO },
-+	{  6, MPP_GPIO },		/* PCI_intA */
-+	{  7, MPP_GPIO },		/* PCI_intB */
-+	{  8, MPP_UNUSED },
-+	{  9, MPP_UNUSED },
-+	{ 10, MPP_UNUSED },
-+	{ 11, MPP_UNUSED },
-+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
-+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
-+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
-+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
-+	{ 16, MPP_UNUSED },
-+	{ 17, MPP_UNUSED },
-+	{ 18, MPP_UNUSED },
-+	{ 19, MPP_UNUSED },
-+	{ -1 },
- };
- 
- static void __init rd88f5182_init(void)
-@@ -252,35 +272,9 @@ static void __init rd88f5182_init(void)
- 	 */
- 	orion5x_init();
- 
--	/*
--	 * Setup the CPU address decode windows for our devices
--	 */
--	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
--				RD88F5182_NOR_BOOT_SIZE);
--	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
--
--	/*
--	 * Open a special address decode windows for the PCIe WA.
--	 */
--	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
--				ORION5X_PCIE_WA_SIZE);
-+	orion5x_mpp_conf(rd88f5182_mpp_modes);
- 
- 	/*
--	 * Setup Multiplexing Pins --
--	 * MPP[0] Debug Led (GPIO - Out)
--	 * MPP[1] Debug Led (GPIO - Out)
--	 * MPP[2] N/A
--	 * MPP[3] RTC_Int (GPIO - In)
--	 * MPP[4] GPIO
--	 * MPP[5] GPIO
--	 * MPP[6] PCI_intA (GPIO - In)
--	 * MPP[7] PCI_intB (GPIO - In)
--	 * MPP[8-11] N/A
--	 * MPP[12] SATA 0 presence Indication
--	 * MPP[13] SATA 1 presence Indication
--	 * MPP[14] SATA 0 active Indication
--	 * MPP[15] SATA 1 active indication
--	 * MPP[16-19] Not used
- 	 * MPP[20] PCI Clock to MV88F5182
- 	 * MPP[21] PCI Clock to mini PCI CON11
- 	 * MPP[22] USB 0 over current indication
-@@ -289,16 +283,23 @@ static void __init rd88f5182_init(void)
- 	 * MPP[25] USB 0 over current enable
- 	 */
- 
--	orion5x_write(MPP_0_7_CTRL, 0x00000003);
--	orion5x_write(MPP_8_15_CTRL, 0x55550000);
--	orion5x_write(MPP_16_19_CTRL, 0x5555);
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	orion5x_ehci1_init();
-+	orion5x_eth_init(&rd88f5182_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_sata_init(&rd88f5182_sata_data);
-+	orion5x_uart0_init();
- 
--	orion5x_gpio_set_valid_pins(0x000000fb);
-+	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
-+				   RD88F5182_NOR_BOOT_SIZE);
-+
-+	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
-+	platform_device_register(&rd88f5182_nor_flash);
- 
--	platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
- 	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
--	orion5x_eth_init(&rd88f5182_eth_data);
--	orion5x_sata_init(&rd88f5182_sata_data);
- }
- 
- MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
---- a/arch/arm/mach-orion5x/ts209-setup.c
-+++ b/arch/arm/mach-orion5x/ts209-setup.c
-@@ -28,6 +28,8 @@
- #include <asm/mach/pci.h>
- #include <asm/arch/orion5x.h>
- #include "common.h"
-+#include "mpp.h"
-+#include "tsx09-common.h"
- 
- #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
- #define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
-@@ -47,52 +49,54 @@
-  ***************************************************************************/
- static struct mtd_partition qnap_ts209_partitions[] = {
- 	{
--		.name       = "U-Boot",
--		.size       = 0x00080000,
--		.offset     = 0x00780000,
--		.mask_flags = MTD_WRITEABLE,
-+		.name		= "U-Boot",
-+		.size		= 0x00080000,
-+		.offset		= 0x00780000,
-+		.mask_flags	= MTD_WRITEABLE,
- 	}, {
--		.name   = "Kernel",
--		.size   = 0x00200000,
--		.offset = 0,
-+		.name		= "Kernel",
-+		.size		= 0x00200000,
-+		.offset		= 0,
- 	}, {
--		.name   = "RootFS1",
--		.size   = 0x00400000,
--		.offset = 0x00200000,
-+		.name		= "RootFS1",
-+		.size		= 0x00400000,
-+		.offset		= 0x00200000,
- 	}, {
--		.name   = "RootFS2",
--		.size   = 0x00100000,
--		.offset = 0x00600000,
-+		.name		= "RootFS2",
-+		.size		= 0x00100000,
-+		.offset		= 0x00600000,
- 	}, {
--		.name   = "U-Boot Config",
--		.size   = 0x00020000,
--		.offset = 0x00760000,
-+		.name		= "U-Boot Config",
-+		.size		= 0x00020000,
-+		.offset		= 0x00760000,
- 	}, {
--		.name       = "NAS Config",
--		.size       = 0x00060000,
--		.offset     = 0x00700000,
--		.mask_flags = MTD_WRITEABLE,
--	}
-+		.name		= "NAS Config",
-+		.size		= 0x00060000,
-+		.offset		= 0x00700000,
-+		.mask_flags	= MTD_WRITEABLE,
-+	},
- };
- 
- static struct physmap_flash_data qnap_ts209_nor_flash_data = {
--	.width    = 1,
--	.parts    = qnap_ts209_partitions,
--	.nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
-+	.width		= 1,
-+	.parts		= qnap_ts209_partitions,
-+	.nr_parts	= ARRAY_SIZE(qnap_ts209_partitions)
- };
- 
- static struct resource qnap_ts209_nor_flash_resource = {
--	.flags = IORESOURCE_MEM,
--	.start = QNAP_TS209_NOR_BOOT_BASE,
--	.end   = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
-+	.flags	= IORESOURCE_MEM,
-+	.start	= QNAP_TS209_NOR_BOOT_BASE,
-+	.end	= QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
- };
- 
- static struct platform_device qnap_ts209_nor_flash = {
--	.name          = "physmap-flash",
--	.id            = 0,
--	.dev           = { .platform_data = &qnap_ts209_nor_flash_data, },
--	.resource      = &qnap_ts209_nor_flash_resource,
--	.num_resources = 1,
-+	.name		= "physmap-flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data	= &qnap_ts209_nor_flash_data,
-+	},
-+	.resource	= &qnap_ts209_nor_flash_resource,
-+	.num_resources	= 1,
- };
- 
- /*****************************************************************************
-@@ -164,12 +168,12 @@ static int __init qnap_ts209_pci_map_irq
- }
- 
- static struct hw_pci qnap_ts209_pci __initdata = {
--	.nr_controllers = 2,
--	.preinit        = qnap_ts209_pci_preinit,
--	.swizzle        = pci_std_swizzle,
--	.setup          = orion5x_pci_sys_setup,
--	.scan           = orion5x_pci_sys_scan_bus,
--	.map_irq        = qnap_ts209_pci_map_irq,
-+	.nr_controllers	= 2,
-+	.preinit	= qnap_ts209_pci_preinit,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= orion5x_pci_sys_setup,
-+	.scan		= orion5x_pci_sys_scan_bus,
-+	.map_irq	= qnap_ts209_pci_map_irq,
- };
- 
- static int __init qnap_ts209_pci_init(void)
-@@ -183,96 +187,6 @@ static int __init qnap_ts209_pci_init(vo
- subsys_initcall(qnap_ts209_pci_init);
- 
- /*****************************************************************************
-- * Ethernet
-- ****************************************************************************/
--
--static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
--	.phy_addr       = 8,
--	.force_phy_addr = 1,
--};
--
--static int __init parse_hex_nibble(char n)
--{
--	if (n >= '0' && n <= '9')
--		return n - '0';
--
--	if (n >= 'A' && n <= 'F')
--		return n - 'A' + 10;
--
--	if (n >= 'a' && n <= 'f')
--		return n - 'a' + 10;
--
--	return -1;
--}
--
--static int __init parse_hex_byte(const char *b)
--{
--	int hi;
--	int lo;
--
--	hi = parse_hex_nibble(b[0]);
--	lo = parse_hex_nibble(b[1]);
--
--	if (hi < 0 || lo < 0)
--		return -1;
--
--	return (hi << 4) | lo;
--}
--
--static int __init check_mac_addr(const char *addr_str)
--{
--	u_int8_t addr[6];
--	int i;
--
--	for (i = 0; i < 6; i++) {
--		int byte;
--
--		/*
--		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
--		 */
--		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
--			return -1;
--
--		byte = parse_hex_byte(addr_str + (i * 3));
--		if (byte < 0)
--			return -1;
--		addr[i] = byte;
--	}
--
--	printk(KERN_INFO "ts209: found ethernet mac address ");
--	for (i = 0; i < 6; i++)
--		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
--
--	memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
--
--	return 0;
--}
--
--/*
-- * The 'NAS Config' flash partition has an ext2 filesystem which
-- * contains a file that has the ethernet MAC address in plain text
-- * (format "xx:xx:xx:xx:xx:xx\n".)
-- */
--static void __init ts209_find_mac_addr(void)
--{
--	unsigned long addr;
--
--	for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
--		char *nor_page;
--		int ret = 0;
--
--		nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
--		if (nor_page != NULL) {
--			ret = check_mac_addr(nor_page);
--			iounmap(nor_page);
--		}
--
--		if (ret == 0)
--			break;
--	}
--}
--
--/*****************************************************************************
-  * RTC S35390A on I2C bus
-  ****************************************************************************/
- 
-@@ -280,7 +194,7 @@ static void __init ts209_find_mac_addr(v
- 
- static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
- 	I2C_BOARD_INFO("s35390a", 0x30),
--       .irq         = 0,
-+	.irq	= 0,
- };
- 
- /****************************************************************************
-@@ -297,70 +211,63 @@ static struct gpio_keys_button qnap_ts20
- 		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
- 		.desc		= "USB Copy Button",
- 		.active_low	= 1,
--	},
--	{
-+	}, {
- 		.code		= KEY_POWER,
- 		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
- 		.desc		= "Reset Button",
- 		.active_low	= 1,
--	}
-+	},
- };
- 
- static struct gpio_keys_platform_data qnap_ts209_button_data = {
- 	.buttons	= qnap_ts209_buttons,
--	.nbuttons       = ARRAY_SIZE(qnap_ts209_buttons),
-+	.nbuttons	= ARRAY_SIZE(qnap_ts209_buttons),
- };
- 
- static struct platform_device qnap_ts209_button_device = {
- 	.name		= "gpio-keys",
- 	.id		= -1,
- 	.num_resources	= 0,
--	.dev		= { .platform_data  = &qnap_ts209_button_data, },
-+	.dev		= {
-+		.platform_data	= &qnap_ts209_button_data,
-+	},
- };
- 
- /*****************************************************************************
-  * SATA
-  ****************************************************************************/
- static struct mv_sata_platform_data qnap_ts209_sata_data = {
--	.n_ports        = 2,
-+	.n_ports	= 2,
- };
- 
- /*****************************************************************************
- 
-  * General Setup
-  ****************************************************************************/
--
--static struct platform_device *qnap_ts209_devices[] __initdata = {
--	&qnap_ts209_nor_flash,
--	&qnap_ts209_button_device,
-+static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
-+	{  0, MPP_UNUSED },
-+	{  1, MPP_GPIO },		/* USB copy button */
-+	{  2, MPP_GPIO },		/* Load defaults button */
-+	{  3, MPP_GPIO },		/* GPIO RTC */
-+	{  4, MPP_UNUSED },
-+	{  5, MPP_UNUSED },
-+	{  6, MPP_GPIO },		/* PCI Int A */
-+	{  7, MPP_GPIO },		/* PCI Int B */
-+	{  8, MPP_UNUSED },
-+	{  9, MPP_UNUSED },
-+	{ 10, MPP_UNUSED },
-+	{ 11, MPP_UNUSED },
-+	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
-+	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
-+	{ 14, MPP_SATA_LED },		/* SATA 0 active */
-+	{ 15, MPP_SATA_LED },		/* SATA 1 active */
-+	{ 16, MPP_UART },		/* UART1 RXD */
-+	{ 17, MPP_UART },		/* UART1 TXD */
-+	{ 18, MPP_GPIO },		/* SW_RST */
-+	{ 19, MPP_UNUSED },
-+	{ -1 },
- };
- 
--/*
-- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
-- */
--
--#define UART1_REG(x)  (UART1_VIRT_BASE + ((UART_##x) << 2))
--
--static void qnap_ts209_power_off(void)
--{
--	/* 19200 baud divisor */
--	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
--
--	pr_info("%s: triggering power-off...\n", __func__);
--
--	/* hijack uart1 and reset into sane state (19200,8n1) */
--	orion5x_write(UART1_REG(LCR), 0x83);
--	orion5x_write(UART1_REG(DLL), divisor & 0xff);
--	orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
--	orion5x_write(UART1_REG(LCR), 0x03);
--	orion5x_write(UART1_REG(IER), 0x00);
--	orion5x_write(UART1_REG(FCR), 0x00);
--	orion5x_write(UART1_REG(MCR), 0x00);
--
--	/* send the power-off command 'A' to PIC */
--	orion5x_write(UART1_REG(TX), 'A');
--}
--
- static void __init qnap_ts209_init(void)
- {
- 	/*
-@@ -368,51 +275,33 @@ static void __init qnap_ts209_init(void)
- 	 */
- 	orion5x_init();
- 
--	/*
--	 * Setup flash mapping
--	 */
--	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
--			    QNAP_TS209_NOR_BOOT_SIZE);
--
--	/*
--	 * Open a special address decode windows for the PCIe WA.
--	 */
--	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
--				ORION5X_PCIE_WA_SIZE);
-+	orion5x_mpp_conf(ts209_mpp_modes);
- 
- 	/*
--	 * Setup Multiplexing Pins --
--	 * MPP[0] Reserved
--	 * MPP[1] USB copy button (0 active)
--	 * MPP[2] Load defaults button (0 active)
--	 * MPP[3] GPIO RTC
--	 * MPP[4-5] Reserved
--	 * MPP[6] PCI Int A
--	 * MPP[7] PCI Int B
--	 * MPP[8-11] Reserved
--	 * MPP[12] SATA 0 presence
--	 * MPP[13] SATA 1 presence
--	 * MPP[14] SATA 0 active
--	 * MPP[15] SATA 1 active
--	 * MPP[16] UART1 RXD
--	 * MPP[17] UART1 TXD
--	 * MPP[18] SW_RST (0 active)
--	 * MPP[19] Reserved
- 	 * MPP[20] PCI clock 0
- 	 * MPP[21] PCI clock 1
- 	 * MPP[22] USB 0 over current
- 	 * MPP[23-25] Reserved
- 	 */
--	orion5x_write(MPP_0_7_CTRL, 0x3);
--	orion5x_write(MPP_8_15_CTRL, 0x55550000);
--	orion5x_write(MPP_16_19_CTRL, 0x5500);
--	orion5x_gpio_set_valid_pins(0x3cc0fff);
- 
--	/* register ts209 specific power-off method */
--	pm_power_off = qnap_ts209_power_off;
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	orion5x_ehci1_init();
-+	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
-+				 qnap_ts209_partitions[5].offset,
-+				 qnap_ts209_partitions[5].size);
-+	orion5x_eth_init(&qnap_tsx09_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_sata_init(&qnap_ts209_sata_data);
-+	orion5x_uart0_init();
-+
-+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-+				   QNAP_TS209_NOR_BOOT_SIZE);
-+	platform_device_register(&qnap_ts209_nor_flash);
- 
--	platform_add_devices(qnap_ts209_devices,
--				ARRAY_SIZE(qnap_ts209_devices));
-+	platform_device_register(&qnap_ts209_button_device);
- 
- 	/* Get RTC IRQ and register the chip */
- 	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
-@@ -425,14 +314,12 @@ static void __init qnap_ts209_init(void)
- 		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
- 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
- 
--	ts209_find_mac_addr();
--	orion5x_eth_init(&qnap_ts209_eth_data);
--
--	orion5x_sata_init(&qnap_ts209_sata_data);
-+	/* register tsx09 specific power-off method */
-+	pm_power_off = qnap_tsx09_power_off;
- }
- 
- MACHINE_START(TS209, "QNAP TS-109/TS-209")
--	/* Maintainer:  Byron Bradley <byron.bbradley@gmail.com> */
-+	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- 	.phys_io	= ORION5X_REGS_PHYS_BASE,
- 	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
- 	.boot_params	= 0x00000100,
---- /dev/null
-+++ b/arch/arm/mach-orion5x/ts409-setup.c
-@@ -0,0 +1,273 @@
-+/*
-+ * QNAP TS-409 Board Setup
-+ *
-+ * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/i2c.h>
-+#include <linux/serial_reg.h>
-+#include <asm/mach-types.h>
-+#include <asm/gpio.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include <asm/arch/orion5x.h>
-+#include "common.h"
-+#include "mpp.h"
-+#include "tsx09-common.h"
-+
-+/*****************************************************************************
-+ * QNAP TS-409 Info
-+ ****************************************************************************/
-+
-+/*
-+ * QNAP TS-409 hardware :
-+ * - Marvell 88F5281-D0
-+ * - Marvell 88SX7042 SATA controller (PCIe)
-+ * - Marvell 88E1118 Gigabit Ethernet PHY
-+ * - RTC S35390A (@0x30) on I2C bus
-+ * - 8MB NOR flash
-+ * - 256MB of DDR-2 RAM
-+ */
-+
-+/*
-+ * 8MB NOR flash Device bus boot chip select
-+ */
-+
-+#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
-+#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
-+
-+/****************************************************************************
-+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
-+ *     partitions on the device because we want to keep compatability with
-+ *     existing QNAP firmware.
-+ *
-+ * Layout as used by QNAP:
-+ *  [2] 0x00000000-0x00200000 : "Kernel"
-+ *  [3] 0x00200000-0x00600000 : "RootFS1"
-+ *  [4] 0x00600000-0x00700000 : "RootFS2"
-+ *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
-+ *  [5] 0x00760000-0x00780000 : "U-Boot Config"
-+ *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
-+ ***************************************************************************/
-+static struct mtd_partition qnap_ts409_partitions[] = {
-+	{
-+		.name		= "U-Boot",
-+		.size		= 0x00080000,
-+		.offset		= 0x00780000,
-+		.mask_flags	= MTD_WRITEABLE,
-+	}, {
-+		.name		= "Kernel",
-+		.size		= 0x00200000,
-+		.offset		= 0,
-+	}, {
-+		.name		= "RootFS1",
-+		.size		= 0x00400000,
-+		.offset		= 0x00200000,
-+	}, {
-+		.name		= "RootFS2",
-+		.size		= 0x00100000,
-+		.offset		= 0x00600000,
-+	}, {
-+		.name		= "U-Boot Config",
-+		.size		= 0x00020000,
-+		.offset		= 0x00760000,
-+	}, {
-+		.name		= "NAS Config",
-+		.size		= 0x00060000,
-+		.offset		= 0x00700000,
-+		.mask_flags	= MTD_WRITEABLE,
-+	},
-+};
-+
-+static struct physmap_flash_data qnap_ts409_nor_flash_data = {
-+	.width		= 1,
-+	.parts		= qnap_ts409_partitions,
-+	.nr_parts	= ARRAY_SIZE(qnap_ts409_partitions)
-+};
-+
-+static struct resource qnap_ts409_nor_flash_resource = {
-+	.flags	= IORESOURCE_MEM,
-+	.start	= QNAP_TS409_NOR_BOOT_BASE,
-+	.end	= QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device qnap_ts409_nor_flash = {
-+	.name		= "physmap-flash",
-+	.id		= 0,
-+	.dev		= { .platform_data = &qnap_ts409_nor_flash_data, },
-+	.num_resources	= 1,
-+	.resource	= &qnap_ts409_nor_flash_resource,
-+};
-+
-+/*****************************************************************************
-+ * PCI
-+ ****************************************************************************/
-+
-+static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	int irq;
-+
-+	/*
-+	 * Check for devices with hard-wired IRQs.
-+	 */
-+	irq = orion5x_pci_map_irq(dev, slot, pin);
-+	if (irq != -1)
-+		return irq;
-+
-+	/*
-+	 * PCI isn't used on the TS-409
-+	 */
-+	return -1;
-+}
-+
-+static struct hw_pci qnap_ts409_pci __initdata = {
-+	.nr_controllers	= 2,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= orion5x_pci_sys_setup,
-+	.scan		= orion5x_pci_sys_scan_bus,
-+	.map_irq	= qnap_ts409_pci_map_irq,
-+};
-+
-+static int __init qnap_ts409_pci_init(void)
-+{
-+	if (machine_is_ts409())
-+		pci_common_init(&qnap_ts409_pci);
-+
-+	return 0;
-+}
-+
-+subsys_initcall(qnap_ts409_pci_init);
-+
-+/*****************************************************************************
-+ * RTC S35390A on I2C bus
-+ ****************************************************************************/
-+
-+#define TS409_RTC_GPIO	10
-+
-+static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
-+	I2C_BOARD_INFO("s35390a", 0x30),
-+};
-+
-+/****************************************************************************
-+ * GPIO Attached Keys
-+ *     Power button is attached to the PIC microcontroller
-+ ****************************************************************************/
-+
-+#define QNAP_TS409_GPIO_KEY_MEDIA	15
-+
-+static struct gpio_keys_button qnap_ts409_buttons[] = {
-+	{
-+		.code		= KEY_RESTART,
-+		.gpio		= QNAP_TS409_GPIO_KEY_MEDIA,
-+		.desc		= "USB Copy Button",
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data qnap_ts409_button_data = {
-+	.buttons	= qnap_ts409_buttons,
-+	.nbuttons	= ARRAY_SIZE(qnap_ts409_buttons),
-+};
-+
-+static struct platform_device qnap_ts409_button_device = {
-+	.name		= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev		= {
-+		.platform_data	= &qnap_ts409_button_data,
-+	},
-+};
-+
-+/*****************************************************************************
-+ * General Setup
-+ ****************************************************************************/
-+static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
-+	{  0, MPP_UNUSED },
-+	{  1, MPP_UNUSED },
-+	{  2, MPP_UNUSED },
-+	{  3, MPP_UNUSED },
-+	{  4, MPP_GPIO },		/* HDD 1 status */
-+	{  5, MPP_GPIO },		/* HDD 2 status */
-+	{  6, MPP_GPIO },		/* HDD 3 status */
-+	{  7, MPP_GPIO },		/* HDD 4 status */
-+	{  8, MPP_UNUSED },
-+	{  9, MPP_UNUSED },
-+	{ 10, MPP_GPIO },		/* RTC int */
-+	{ 11, MPP_UNUSED },
-+	{ 12, MPP_UNUSED },
-+	{ 13, MPP_UNUSED },
-+	{ 14, MPP_GPIO },		/* SW_RST */
-+	{ 15, MPP_GPIO },		/* USB copy button */
-+	{ 16, MPP_UART },		/* UART1 RXD */
-+	{ 17, MPP_UART },		/* UART1 TXD */
-+	{ 18, MPP_UNUSED },
-+	{ 19, MPP_UNUSED },
-+	{ -1 },
-+};
-+
-+static void __init qnap_ts409_init(void)
-+{
-+	/*
-+	 * Setup basic Orion functions. Need to be called early.
-+	 */
-+	orion5x_init();
-+
-+	orion5x_mpp_conf(ts409_mpp_modes);
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
-+				 qnap_ts409_partitions[5].offset,
-+				 qnap_ts409_partitions[5].size);
-+	orion5x_eth_init(&qnap_tsx09_eth_data);
-+	orion5x_i2c_init();
-+	orion5x_uart0_init();
-+
-+	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
-+				   QNAP_TS409_NOR_BOOT_SIZE);
-+	platform_device_register(&qnap_ts409_nor_flash);
-+
-+	platform_device_register(&qnap_ts409_button_device);
-+
-+	/* Get RTC IRQ and register the chip */
-+	if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
-+		if (gpio_direction_input(TS409_RTC_GPIO) == 0)
-+			qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
-+		else
-+			gpio_free(TS409_RTC_GPIO);
-+	}
-+	if (qnap_ts409_i2c_rtc.irq == 0)
-+		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
-+	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
-+
-+	/* register tsx09 specific power-off method */
-+	pm_power_off = qnap_tsx09_power_off;
-+}
-+
-+MACHINE_START(TS409, "QNAP TS-409")
-+	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
-+	.phys_io	= ORION5X_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= qnap_ts409_init,
-+	.map_io		= orion5x_map_io,
-+	.init_irq	= orion5x_init_irq,
-+	.timer		= &orion5x_timer,
-+	.fixup		= tag_fixup_mem32,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
-@@ -0,0 +1,277 @@
-+/*
-+ * arch/arm/mach-orion5x/ts78xx-setup.c
-+ *
-+ * Maintainer: Alexander Clouter <alex@digriz.org.uk>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/ata_platform.h>
-+#include <linux/m48t86.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/arch/orion5x.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+/*****************************************************************************
-+ * TS-78xx Info
-+ ****************************************************************************/
-+
-+/*
-+ * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
-+ */
-+#define TS78XX_FPGA_REGS_PHYS_BASE	0xe8000000
-+#define TS78XX_FPGA_REGS_VIRT_BASE	0xff900000
-+#define TS78XX_FPGA_REGS_SIZE		SZ_1M
-+
-+#define TS78XX_FPGA_REGS_SYSCON_ID	(TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
-+#define TS78XX_FPGA_REGS_SYSCON_LCDI	(TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
-+#define TS78XX_FPGA_REGS_SYSCON_LCDO	(TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
-+
-+#define TS78XX_FPGA_REGS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
-+#define TS78XX_FPGA_REGS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
-+
-+/*
-+ * 512kB NOR flash Device
-+ */
-+#define TS78XX_NOR_BOOT_BASE		0xff800000
-+#define TS78XX_NOR_BOOT_SIZE		SZ_512K
-+
-+/*****************************************************************************
-+ * I/O Address Mapping
-+ ****************************************************************************/
-+static struct map_desc ts78xx_io_desc[] __initdata = {
-+	{
-+		.virtual	= TS78XX_FPGA_REGS_VIRT_BASE,
-+		.pfn		= __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
-+		.length		= TS78XX_FPGA_REGS_SIZE,
-+		.type		= MT_DEVICE,
-+	},
-+};
-+
-+void __init ts78xx_map_io(void)
-+{
-+	orion5x_map_io();
-+	iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
-+}
-+
-+/*****************************************************************************
-+ * 512kB NOR Boot Flash - the chip is a M25P40
-+ ****************************************************************************/
-+static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
-+	{
-+		.name		= "ts-bootrom",
-+		.offset		= 0,
-+		/* only the first 256kB is used */
-+		.size		= SZ_256K,
-+		.mask_flags	= MTD_WRITEABLE,
-+	},
-+};
-+
-+static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
-+	.width		= 1,
-+	.parts		= ts78xx_nor_boot_flash_resources,
-+	.nr_parts	= ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
-+};
-+
-+static struct resource ts78xx_nor_boot_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= TS78XX_NOR_BOOT_BASE,
-+	.end		= TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device ts78xx_nor_boot_flash = {
-+	.name		= "physmap-flash",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data	= &ts78xx_nor_boot_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &ts78xx_nor_boot_flash_resource,
-+};
-+
-+/*****************************************************************************
-+ * Ethernet
-+ ****************************************************************************/
-+static struct mv643xx_eth_platform_data ts78xx_eth_data = {
-+	.phy_addr	= 0,
-+	.force_phy_addr = 1,
-+};
-+
-+/*****************************************************************************
-+ * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
-+ ****************************************************************************/
-+#ifdef CONFIG_RTC_DRV_M48T86
-+static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
-+{
-+	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
-+	return readb(TS78XX_FPGA_REGS_RTC_DATA);
-+}
-+
-+static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
-+{
-+	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
-+	writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
-+}
-+
-+static struct m48t86_ops ts78xx_rtc_ops = {
-+	.readbyte	= ts78xx_rtc_readbyte,
-+	.writebyte	= ts78xx_rtc_writebyte,
-+};
-+
-+static struct platform_device ts78xx_rtc_device = {
-+	.name		= "rtc-m48t86",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data	= &ts78xx_rtc_ops,
-+	},
-+	.num_resources	= 0,
-+};
-+
-+/*
-+ * TS uses some of the user storage space on the RTC chip so see if it is
-+ * present; as it's an optional feature at purchase time and not all boards
-+ * will have it present
-+ *
-+ * I've used the method TS use in their rtc7800.c example for the detection
-+ *
-+ * TODO: track down a guinea pig without an RTC to see if we can work out a
-+ * 		better RTC detection routine
-+ */
-+static int __init ts78xx_rtc_init(void)
-+{
-+	unsigned char tmp_rtc0, tmp_rtc1;
-+
-+	tmp_rtc0 = ts78xx_rtc_readbyte(126);
-+	tmp_rtc1 = ts78xx_rtc_readbyte(127);
-+
-+	ts78xx_rtc_writebyte(0x00, 126);
-+	ts78xx_rtc_writebyte(0x55, 127);
-+	if (ts78xx_rtc_readbyte(127) == 0x55) {
-+		ts78xx_rtc_writebyte(0xaa, 127);
-+		if (ts78xx_rtc_readbyte(127) == 0xaa
-+				&& ts78xx_rtc_readbyte(126) == 0x00) {
-+			ts78xx_rtc_writebyte(tmp_rtc0, 126);
-+			ts78xx_rtc_writebyte(tmp_rtc1, 127);
-+			platform_device_register(&ts78xx_rtc_device);
-+			return 1;
-+		}
-+	}
-+
-+	return 0;
-+};
-+#else
-+static int __init ts78xx_rtc_init(void)
-+{
-+	return 0;
-+}
-+#endif
-+
-+/*****************************************************************************
-+ * SATA
-+ ****************************************************************************/
-+static struct mv_sata_platform_data ts78xx_sata_data = {
-+	.n_ports	= 2,
-+};
-+
-+/*****************************************************************************
-+ * print some information regarding the board
-+ ****************************************************************************/
-+static void __init ts78xx_print_board_id(void)
-+{
-+	unsigned int board_info;
-+
-+	board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
-+	printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
-+				board_info & 0xff,
-+				(board_info >> 8) & 0xffffff);
-+	board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
-+	printk("JP1=%d, JP2=%d\n",
-+				(board_info >> 30) & 0x1,
-+				(board_info >> 31) & 0x1);
-+};
-+
-+/*****************************************************************************
-+ * General Setup
-+ ****************************************************************************/
-+static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
-+	{  0, MPP_UNUSED },
-+	{  1, MPP_GPIO },		/* JTAG Clock */
-+	{  2, MPP_GPIO },		/* JTAG Data In */
-+	{  3, MPP_GPIO },		/* Lat ECP2 256 FPGA - PB2B */
-+	{  4, MPP_GPIO },		/* JTAG Data Out */
-+	{  5, MPP_GPIO },		/* JTAG TMS */
-+	{  6, MPP_GPIO },		/* Lat ECP2 256 FPGA - PB31A_CLK4+ */
-+	{  7, MPP_GPIO },		/* Lat ECP2 256 FPGA - PB22B */
-+	{  8, MPP_UNUSED },
-+	{  9, MPP_UNUSED },
-+	{ 10, MPP_UNUSED },
-+	{ 11, MPP_UNUSED },
-+	{ 12, MPP_UNUSED },
-+	{ 13, MPP_UNUSED },
-+	{ 14, MPP_UNUSED },
-+	{ 15, MPP_UNUSED },
-+	{ 16, MPP_UART },
-+	{ 17, MPP_UART },
-+	{ 18, MPP_UART },
-+	{ 19, MPP_UART },
-+	{ -1 },
-+};
-+
-+static void __init ts78xx_init(void)
-+{
-+	/*
-+	 * Setup basic Orion functions. Need to be called early.
-+	 */
-+	orion5x_init();
-+
-+	ts78xx_print_board_id();
-+
-+	orion5x_mpp_conf(ts78xx_mpp_modes);
-+
-+	/*
-+	 * MPP[20] PCI Clock Out 1
-+	 * MPP[21] PCI Clock Out 0
-+	 * MPP[22] Unused
-+	 * MPP[23] Unused
-+	 * MPP[24] Unused
-+	 * MPP[25] Unused
-+	 */
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	orion5x_ehci1_init();
-+	orion5x_eth_init(&ts78xx_eth_data);
-+	orion5x_sata_init(&ts78xx_sata_data);
-+	orion5x_uart0_init();
-+	orion5x_uart1_init();
-+
-+	orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
-+				   TS78XX_NOR_BOOT_SIZE);
-+	platform_device_register(&ts78xx_nor_boot_flash);
-+
-+	if (!ts78xx_rtc_init())
-+		printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
-+}
-+
-+MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
-+	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
-+	.phys_io	= ORION5X_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= ts78xx_init,
-+	.map_io		= ts78xx_map_io,
-+	.init_irq	= orion5x_init_irq,
-+	.timer		= &orion5x_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-orion5x/tsx09-common.c
-@@ -0,0 +1,132 @@
-+/*
-+ * QNAP TS-x09 Boards common functions
-+ *
-+ * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
-+ *		Byron Bradley <byron.bbradley@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/serial_reg.h>
-+#include "tsx09-common.h"
-+
-+/*****************************************************************************
-+ * QNAP TS-x09 specific power off method via UART1-attached PIC
-+ ****************************************************************************/
-+
-+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-+
-+void qnap_tsx09_power_off(void)
-+{
-+	/* 19200 baud divisor */
-+	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-+
-+	pr_info("%s: triggering power-off...\n", __func__);
-+
-+	/* hijack uart1 and reset into sane state (19200,8n1) */
-+	writel(0x83, UART1_REG(LCR));
-+	writel(divisor & 0xff, UART1_REG(DLL));
-+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-+	writel(0x03, UART1_REG(LCR));
-+	writel(0x00, UART1_REG(IER));
-+	writel(0x00, UART1_REG(FCR));
-+	writel(0x00, UART1_REG(MCR));
-+
-+	/* send the power-off command 'A' to PIC */
-+	writel('A', UART1_REG(TX));
-+}
-+
-+/*****************************************************************************
-+ * Ethernet
-+ ****************************************************************************/
-+
-+struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
-+	.phy_addr	= 8,
-+};
-+
-+static int __init qnap_tsx09_parse_hex_nibble(char n)
-+{
-+	if (n >= '0' && n <= '9')
-+		return n - '0';
-+
-+	if (n >= 'A' && n <= 'F')
-+		return n - 'A' + 10;
-+
-+	if (n >= 'a' && n <= 'f')
-+		return n - 'a' + 10;
-+
-+	return -1;
-+}
-+
-+static int __init qnap_tsx09_parse_hex_byte(const char *b)
-+{
-+	int hi;
-+	int lo;
-+
-+	hi = qnap_tsx09_parse_hex_nibble(b[0]);
-+	lo = qnap_tsx09_parse_hex_nibble(b[1]);
-+
-+	if (hi < 0 || lo < 0)
-+		return -1;
-+
-+	return (hi << 4) | lo;
-+}
-+
-+static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
-+{
-+	u_int8_t addr[6];
-+	int i;
-+
-+	for (i = 0; i < 6; i++) {
-+		int byte;
-+
-+		/*
-+		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-+		 */
-+		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-+			return -1;
-+
-+		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
-+		if (byte < 0)
-+			return -1;
-+		addr[i] = byte;
-+	}
-+
-+	printk(KERN_INFO "tsx09: found ethernet mac address ");
-+	for (i = 0; i < 6; i++)
-+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-+
-+	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
-+
-+	return 0;
-+}
-+
-+/*
-+ * The 'NAS Config' flash partition has an ext2 filesystem which
-+ * contains a file that has the ethernet MAC address in plain text
-+ * (format "xx:xx:xx:xx:xx:xx\n").
-+ */
-+void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
-+{
-+	unsigned long addr;
-+
-+	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
-+		char *nor_page;
-+		int ret = 0;
-+
-+		nor_page = ioremap(addr, 1024);
-+		if (nor_page != NULL) {
-+			ret = qnap_tsx09_check_mac_addr(nor_page);
-+			iounmap(nor_page);
-+		}
-+
-+		if (ret == 0)
-+			break;
-+	}
-+}
---- /dev/null
-+++ b/arch/arm/mach-orion5x/tsx09-common.h
-@@ -0,0 +1,20 @@
-+#ifndef __ARCH_ORION5X_TSX09_COMMON_H
-+#define __ARCH_ORION5X_TSX09_COMMON_H
-+
-+/*
-+ * QNAP TS-x09 Boards power-off function
-+ */
-+extern void qnap_tsx09_power_off(void);
-+
-+/*
-+ * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
-+ */
-+extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
-+
-+/*
-+ * QNAP TS-x09 Boards ethernet declaration
-+ */
-+extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
-+
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -0,0 +1,173 @@
-+/*
-+ * arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/delay.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/mach-types.h>
-+#include <asm/gpio.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include <asm/arch/orion5x.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
-+	{  0, MPP_GPIO },		/* Power LED green (0=on) */
-+	{  1, MPP_GPIO },		/* Security LED (0=on) */
-+	{  2, MPP_GPIO },		/* Internal Button (0=on) */
-+	{  3, MPP_GPIO },		/* Reset Button (0=on) */
-+	{  4, MPP_GPIO },		/* PCI int */
-+	{  5, MPP_GPIO },		/* Power LED orange (0=on) */
-+	{  6, MPP_GPIO },		/* USB LED (0=on) */
-+	{  7, MPP_GPIO },		/* Wireless LED (0=on) */
-+	{  8, MPP_UNUSED },		/* ??? */
-+	{  9, MPP_GIGE },		/* GE_RXERR */
-+	{ 10, MPP_UNUSED },		/* ??? */
-+	{ 11, MPP_UNUSED },		/* ??? */
-+	{ 12, MPP_GIGE },		/* GE_TXD[4] */
-+	{ 13, MPP_GIGE },		/* GE_TXD[5] */
-+	{ 14, MPP_GIGE },		/* GE_TXD[6] */
-+	{ 15, MPP_GIGE },		/* GE_TXD[7] */
-+	{ 16, MPP_GIGE },		/* GE_RXD[4] */
-+	{ 17, MPP_GIGE },		/* GE_RXD[5] */
-+	{ 18, MPP_GIGE },		/* GE_RXD[6] */
-+	{ 19, MPP_GIGE },		/* GE_RXD[7] */
-+	{ -1 },
-+};
-+
-+/*
-+ * 8M NOR flash Device bus boot chip select
-+ */
-+#define WRT350N_V2_NOR_BOOT_BASE	0xf4000000
-+#define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M
-+
-+static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
-+	{
-+		.name		= "kernel",
-+		.offset		= 0x00000000,
-+		.size		= 0x00760000,
-+	}, {
-+		.name		= "rootfs",
-+		.offset		= 0x001a0000,
-+		.size		= 0x005c0000,
-+	}, {
-+		.name		= "lang",
-+		.offset		= 0x00760000,
-+		.size		= 0x00040000,
-+	}, {
-+		.name		= "nvram",
-+		.offset		= 0x007a0000,
-+		.size		= 0x00020000,
-+	}, {
-+		.name		= "u-boot",
-+		.offset		= 0x007c0000,
-+		.size		= 0x00040000,
-+	},
-+};
-+
-+static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
-+	.width		= 1,
-+	.parts		= wrt350n_v2_nor_flash_partitions,
-+	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
-+};
-+
-+static struct resource wrt350n_v2_nor_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= WRT350N_V2_NOR_BOOT_BASE,
-+	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device wrt350n_v2_nor_flash = {
-+	.name			= "physmap-flash",
-+	.id			= 0,
-+	.dev		= {
-+		.platform_data	= &wrt350n_v2_nor_flash_data,
-+	},
-+	.num_resources		= 1,
-+	.resource		= &wrt350n_v2_nor_flash_resource,
-+};
-+
-+static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
-+	.phy_addr	= -1,
-+};
-+
-+static void __init wrt350n_v2_init(void)
-+{
-+	/*
-+	 * Setup basic Orion functions. Need to be called early.
-+	 */
-+	orion5x_init();
-+
-+	orion5x_mpp_conf(wrt350n_v2_mpp_modes);
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_ehci0_init();
-+	orion5x_eth_init(&wrt350n_v2_eth_data);
-+	orion5x_uart0_init();
-+
-+	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
-+				   WRT350N_V2_NOR_BOOT_SIZE);
-+	platform_device_register(&wrt350n_v2_nor_flash);
-+}
-+
-+static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	int irq;
-+
-+	/*
-+	 * Check for devices with hard-wired IRQs.
-+	 */
-+	irq = orion5x_pci_map_irq(dev, slot, pin);
-+	if (irq != -1)
-+		return irq;
-+
-+	/*
-+	 * Mini-PCI slot.
-+	 */
-+	if (slot == 7)
-+		return gpio_to_irq(4);
-+
-+	return -1;
-+}
-+
-+static struct hw_pci wrt350n_v2_pci __initdata = {
-+	.nr_controllers	= 2,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= orion5x_pci_sys_setup,
-+	.scan		= orion5x_pci_sys_scan_bus,
-+	.map_irq	= wrt350n_v2_pci_map_irq,
-+};
-+
-+static int __init wrt350n_v2_pci_init(void)
-+{
-+	if (machine_is_wrt350n_v2())
-+		pci_common_init(&wrt350n_v2_pci);
-+
-+	return 0;
-+}
-+subsys_initcall(wrt350n_v2_pci_init);
-+
-+MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
-+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-+	.phys_io	= ORION5X_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= wrt350n_v2_init,
-+	.map_io		= orion5x_map_io,
-+	.init_irq	= orion5x_init_irq,
-+	.timer		= &orion5x_timer,
-+	.fixup		= tag_fixup_mem32,
-+MACHINE_END
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -365,7 +365,7 @@ config CPU_XSC3
- # Feroceon
- config CPU_FEROCEON
- 	bool
--	depends on ARCH_ORION5X
-+	depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
- 	default y
- 	select CPU_32v5
- 	select CPU_ABRT_EV5T
-@@ -373,7 +373,7 @@ config CPU_FEROCEON
- 	select CPU_CACHE_VIVT
- 	select CPU_CP15_MMU
- 	select CPU_COPY_FEROCEON if MMU
--	select CPU_TLB_V4WBI if MMU
-+	select CPU_TLB_FEROCEON if MMU
- 
- config CPU_FEROCEON_OLD_ID
- 	bool "Accept early Feroceon cores with an ARM926 ID"
-@@ -551,6 +551,11 @@ config CPU_TLB_V4WBI
- 	  ARM Architecture Version 4 TLB with writeback cache and invalidate
- 	  instruction cache entry.
- 
-+config CPU_TLB_FEROCEON
-+	bool
-+	help
-+	  Feroceon TLB (v4wbi with non-outer-cachable page table walks).
-+
- config CPU_TLB_V6
- 	bool
- 
-@@ -709,6 +714,14 @@ config OUTER_CACHE
- 	bool
- 	default n
- 
-+config CACHE_FEROCEON_L2
-+	bool "Enable the Feroceon L2 cache controller"
-+	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
-+	default y
-+	select OUTER_CACHE
-+	help
-+	  This option enables the Feroceon L2 cache controller.
-+
- config CACHE_L2X0
- 	bool "Enable the L2x0 outer cache controller"
- 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
---- a/arch/arm/mm/Makefile
-+++ b/arch/arm/mm/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
- obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
- obj-$(CONFIG_CPU_TLB_V4WB)	+= tlb-v4wb.o
- obj-$(CONFIG_CPU_TLB_V4WBI)	+= tlb-v4wbi.o
-+obj-$(CONFIG_CPU_TLB_FEROCEON)	+= tlb-v4wbi.o	# reuse v4wbi TLB functions
- obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
- obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
- 
-@@ -73,4 +74,5 @@ obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroc
- obj-$(CONFIG_CPU_V6)		+= proc-v6.o
- obj-$(CONFIG_CPU_V7)		+= proc-v7.o
- 
-+obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
- obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
---- /dev/null
-+++ b/arch/arm/mm/cache-feroceon-l2.c
-@@ -0,0 +1,318 @@
-+/*
-+ * arch/arm/mm/cache-feroceon-l2.c - Feroceon L2 cache controller support
-+ *
-+ * Copyright (C) 2008 Marvell Semiconductor
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ *
-+ * References:
-+ * - Unified Layer 2 Cache for Feroceon CPU Cores,
-+ *   Document ID MV-S104858-00, Rev. A, October 23 2007.
-+ */
-+
-+#include <linux/init.h>
-+#include <asm/cacheflush.h>
-+#include <asm/plat-orion/cache-feroceon-l2.h>
-+
-+
-+/*
-+ * Low-level cache maintenance operations.
-+ *
-+ * As well as the regular 'clean/invalidate/flush L2 cache line by
-+ * MVA' instructions, the Feroceon L2 cache controller also features
-+ * 'clean/invalidate L2 range by MVA' operations.
-+ *
-+ * Cache range operations are initiated by writing the start and
-+ * end addresses to successive cp15 registers, and process every
-+ * cache line whose first byte address lies in the inclusive range
-+ * [start:end].
-+ *
-+ * The cache range operations stall the CPU pipeline until completion.
-+ *
-+ * The range operations require two successive cp15 writes, in
-+ * between which we don't want to be preempted.
-+ */
-+static inline void l2_clean_pa(unsigned long addr)
-+{
-+	__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
-+}
-+
-+static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
-+{
-+	unsigned long flags;
-+
-+	/*
-+	 * Make sure 'start' and 'end' reference the same page, as
-+	 * L2 is PIPT and range operations only do a TLB lookup on
-+	 * the start address.
-+	 */
-+	BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
-+
-+	raw_local_irq_save(flags);
-+	__asm__("mcr p15, 1, %0, c15, c9, 4" : : "r" (start));
-+	__asm__("mcr p15, 1, %0, c15, c9, 5" : : "r" (end));
-+	raw_local_irq_restore(flags);
-+}
-+
-+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
-+{
-+	l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-+}
-+
-+static inline void l2_clean_inv_pa(unsigned long addr)
-+{
-+	__asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
-+}
-+
-+static inline void l2_inv_pa(unsigned long addr)
-+{
-+	__asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
-+}
-+
-+static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
-+{
-+	unsigned long flags;
-+
-+	/*
-+	 * Make sure 'start' and 'end' reference the same page, as
-+	 * L2 is PIPT and range operations only do a TLB lookup on
-+	 * the start address.
-+	 */
-+	BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
-+
-+	raw_local_irq_save(flags);
-+	__asm__("mcr p15, 1, %0, c15, c11, 4" : : "r" (start));
-+	__asm__("mcr p15, 1, %0, c15, c11, 5" : : "r" (end));
-+	raw_local_irq_restore(flags);
-+}
-+
-+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
-+{
-+	l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-+}
-+
-+
-+/*
-+ * Linux primitives.
-+ *
-+ * Note that the end addresses passed to Linux primitives are
-+ * noninclusive, while the hardware cache range operations use
-+ * inclusive start and end addresses.
-+ */
-+#define CACHE_LINE_SIZE		32
-+#define MAX_RANGE_SIZE		1024
-+
-+static int l2_wt_override;
-+
-+static unsigned long calc_range_end(unsigned long start, unsigned long end)
-+{
-+	unsigned long range_end;
-+
-+	BUG_ON(start & (CACHE_LINE_SIZE - 1));
-+	BUG_ON(end & (CACHE_LINE_SIZE - 1));
-+
-+	/*
-+	 * Try to process all cache lines between 'start' and 'end'.
-+	 */
-+	range_end = end;
-+
-+	/*
-+	 * Limit the number of cache lines processed at once,
-+	 * since cache range operations stall the CPU pipeline
-+	 * until completion.
-+	 */
-+	if (range_end > start + MAX_RANGE_SIZE)
-+		range_end = start + MAX_RANGE_SIZE;
-+
-+	/*
-+	 * Cache range operations can't straddle a page boundary.
-+	 */
-+	if (range_end > (start | (PAGE_SIZE - 1)) + 1)
-+		range_end = (start | (PAGE_SIZE - 1)) + 1;
-+
-+	return range_end;
-+}
-+
-+static void feroceon_l2_inv_range(unsigned long start, unsigned long end)
-+{
-+	/*
-+	 * Clean and invalidate partial first cache line.
-+	 */
-+	if (start & (CACHE_LINE_SIZE - 1)) {
-+		l2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
-+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
-+	}
-+
-+	/*
-+	 * Clean and invalidate partial last cache line.
-+	 */
-+	if (end & (CACHE_LINE_SIZE - 1)) {
-+		l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
-+		end &= ~(CACHE_LINE_SIZE - 1);
-+	}
-+
-+	/*
-+	 * Invalidate all full cache lines between 'start' and 'end'.
-+	 */
-+	while (start != end) {
-+		unsigned long range_end = calc_range_end(start, end);
-+		l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
-+		start = range_end;
-+	}
-+
-+	dsb();
-+}
-+
-+static void feroceon_l2_clean_range(unsigned long start, unsigned long end)
-+{
-+	/*
-+	 * If L2 is forced to WT, the L2 will always be clean and we
-+	 * don't need to do anything here.
-+	 */
-+	if (!l2_wt_override) {
-+		start &= ~(CACHE_LINE_SIZE - 1);
-+		end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
-+		while (start != end) {
-+			unsigned long range_end = calc_range_end(start, end);
-+			l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
-+			start = range_end;
-+		}
-+	}
-+
-+	dsb();
-+}
-+
-+static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
-+{
-+	start &= ~(CACHE_LINE_SIZE - 1);
-+	end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
-+	while (start != end) {
-+		unsigned long range_end = calc_range_end(start, end);
-+		if (!l2_wt_override)
-+			l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
-+		l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
-+		start = range_end;
-+	}
-+
-+	dsb();
-+}
-+
-+
-+/*
-+ * Routines to disable and re-enable the D-cache and I-cache at run
-+ * time.  These are necessary because the L2 cache can only be enabled
-+ * or disabled while the L1 Dcache and Icache are both disabled.
-+ */
-+static void __init invalidate_and_disable_dcache(void)
-+{
-+	u32 cr;
-+
-+	cr = get_cr();
-+	if (cr & CR_C) {
-+		unsigned long flags;
-+
-+		raw_local_irq_save(flags);
-+		flush_cache_all();
-+		set_cr(cr & ~CR_C);
-+		raw_local_irq_restore(flags);
-+	}
-+}
-+
-+static void __init enable_dcache(void)
-+{
-+	u32 cr;
-+
-+	cr = get_cr();
-+	if (!(cr & CR_C))
-+		set_cr(cr | CR_C);
-+}
-+
-+static void __init __invalidate_icache(void)
-+{
-+	int dummy;
-+
-+	__asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0\n" : "=r" (dummy));
-+}
-+
-+static void __init invalidate_and_disable_icache(void)
-+{
-+	u32 cr;
-+
-+	cr = get_cr();
-+	if (cr & CR_I) {
-+		set_cr(cr & ~CR_I);
-+		__invalidate_icache();
-+	}
-+}
-+
-+static void __init enable_icache(void)
-+{
-+	u32 cr;
-+
-+	cr = get_cr();
-+	if (!(cr & CR_I))
-+		set_cr(cr | CR_I);
-+}
-+
-+static inline u32 read_extra_features(void)
-+{
-+	u32 u;
-+
-+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
-+
-+	return u;
-+}
-+
-+static inline void write_extra_features(u32 u)
-+{
-+	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
-+}
-+
-+static void __init disable_l2_prefetch(void)
-+{
-+	u32 u;
-+
-+	/*
-+	 * Read the CPU Extra Features register and verify that the
-+	 * Disable L2 Prefetch bit is set.
-+	 */
-+	u = read_extra_features();
-+	if (!(u & 0x01000000)) {
-+		printk(KERN_INFO "Feroceon L2: Disabling L2 prefetch.\n");
-+		write_extra_features(u | 0x01000000);
-+	}
-+}
-+
-+static void __init enable_l2(void)
-+{
-+	u32 u;
-+
-+	u = read_extra_features();
-+	if (!(u & 0x00400000)) {
-+		printk(KERN_INFO "Feroceon L2: Enabling L2\n");
-+
-+		invalidate_and_disable_dcache();
-+		invalidate_and_disable_icache();
-+		write_extra_features(u | 0x00400000);
-+		enable_icache();
-+		enable_dcache();
-+	}
-+}
-+
-+void __init feroceon_l2_init(int __l2_wt_override)
-+{
-+	l2_wt_override = __l2_wt_override;
-+
-+	disable_l2_prefetch();
-+
-+	outer_cache.inv_range = feroceon_l2_inv_range;
-+	outer_cache.clean_range = feroceon_l2_clean_range;
-+	outer_cache.flush_range = feroceon_l2_flush_range;
-+
-+	enable_l2();
-+
-+	printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
-+			 l2_wt_override ? ", in WT override mode" : "");
-+}
---- a/arch/arm/mm/proc-feroceon.S
-+++ b/arch/arm/mm/proc-feroceon.S
-@@ -44,11 +44,31 @@
-  */
- #define CACHE_DLINESIZE	32
- 
-+	.bss
-+	.align 3
-+__cache_params_loc:
-+	.space	8
-+
- 	.text
-+__cache_params:
-+	.word	__cache_params_loc
-+
- /*
-  * cpu_feroceon_proc_init()
-  */
- ENTRY(cpu_feroceon_proc_init)
-+	mrc	p15, 0, r0, c0, c0, 1		@ read cache type register
-+	ldr	r1, __cache_params
-+	mov	r2, #(16 << 5)
-+	tst	r0, #(1 << 16)			@ get way
-+	mov	r0, r0, lsr #18			@ get cache size order
-+	movne	r3, #((4 - 1) << 30)		@ 4-way
-+	and	r0, r0, #0xf
-+	moveq	r3, #0				@ 1-way
-+	mov	r2, r2, lsl r0			@ actual cache size
-+	movne	r2, r2, lsr #2			@ turned into # of sets
-+	sub	r2, r2, #(1 << 5)
-+	stmia	r1, {r2, r3}
- 	mov	pc, lr
- 
- /*
-@@ -59,6 +79,13 @@ ENTRY(cpu_feroceon_proc_fin)
- 	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
- 	msr	cpsr_c, ip
- 	bl	feroceon_flush_kern_cache_all
-+
-+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
-+	mov	r0, #0
-+	mcr	p15, 1, r0, c15, c9, 0		@ clean L2
-+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-+#endif
-+
- 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
- 	bic	r0, r0, #0x1000			@ ...i............
- 	bic	r0, r0, #0x000e			@ ............wca.
-@@ -117,11 +144,19 @@ ENTRY(feroceon_flush_user_cache_all)
-  */
- ENTRY(feroceon_flush_kern_cache_all)
- 	mov	r2, #VM_EXEC
--	mov	ip, #0
-+
- __flush_whole_cache:
--1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
--	bne	1b
-+	ldr	r1, __cache_params
-+	ldmia	r1, {r1, r3}
-+1:	orr	ip, r1, r3
-+2:	mcr	p15, 0, ip, c7, c14, 2		@ clean + invalidate D set/way
-+	subs	ip, ip, #(1 << 30)		@ next way
-+	bcs	2b
-+	subs	r1, r1, #(1 << 5)		@ next set
-+	bcs	1b
-+
- 	tst	r2, #VM_EXEC
-+	mov	ip, #0
- 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
- 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
- 	mov	pc, lr
-@@ -138,7 +173,6 @@ __flush_whole_cache:
-  */
- 	.align	5
- ENTRY(feroceon_flush_user_cache_range)
--	mov	ip, #0
- 	sub	r3, r1, r0			@ calculate total size
- 	cmp	r3, #CACHE_DLIMIT
- 	bgt	__flush_whole_cache
-@@ -152,6 +186,7 @@ ENTRY(feroceon_flush_user_cache_range)
- 	cmp	r0, r1
- 	blo	1b
- 	tst	r2, #VM_EXEC
-+	mov	ip, #0
- 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
- 	mov	pc, lr
- 
-@@ -209,6 +244,20 @@ ENTRY(feroceon_flush_kern_dcache_page)
- 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
- 	mov	pc, lr
- 
-+	.align	5
-+ENTRY(feroceon_range_flush_kern_dcache_page)
-+	mrs	r2, cpsr
-+	add	r1, r0, #PAGE_SZ - CACHE_DLINESIZE	@ top addr is inclusive
-+	orr	r3, r2, #PSR_I_BIT
-+	msr	cpsr_c, r3			@ disable interrupts
-+	mcr	p15, 5, r0, c15, c15, 0		@ D clean/inv range start
-+	mcr	p15, 5, r1, c15, c15, 1		@ D clean/inv range top
-+	msr	cpsr_c, r2			@ restore interrupts
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-+	mov	pc, lr
-+
- /*
-  *	dma_inv_range(start, end)
-  *
-@@ -225,10 +274,10 @@ ENTRY(feroceon_flush_kern_dcache_page)
- 	.align	5
- ENTRY(feroceon_dma_inv_range)
- 	tst	r0, #CACHE_DLINESIZE - 1
-+	bic	r0, r0, #CACHE_DLINESIZE - 1
- 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
- 	tst	r1, #CACHE_DLINESIZE - 1
- 	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
--	bic	r0, r0, #CACHE_DLINESIZE - 1
- 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
- 	add	r0, r0, #CACHE_DLINESIZE
- 	cmp	r0, r1
-@@ -236,6 +285,22 @@ ENTRY(feroceon_dma_inv_range)
- 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
- 	mov	pc, lr
- 
-+	.align	5
-+ENTRY(feroceon_range_dma_inv_range)
-+	mrs	r2, cpsr
-+	tst	r0, #CACHE_DLINESIZE - 1
-+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-+	tst	r1, #CACHE_DLINESIZE - 1
-+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-+	cmp	r1, r0
-+	subne	r1, r1, #1			@ top address is inclusive
-+	orr	r3, r2, #PSR_I_BIT
-+	msr	cpsr_c, r3			@ disable interrupts
-+	mcr	p15, 5, r0, c15, c14, 0		@ D inv range start
-+	mcr	p15, 5, r1, c15, c14, 1		@ D inv range top
-+	msr	cpsr_c, r2			@ restore interrupts
-+	mov	pc, lr
-+
- /*
-  *	dma_clean_range(start, end)
-  *
-@@ -256,6 +321,19 @@ ENTRY(feroceon_dma_clean_range)
- 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
- 	mov	pc, lr
- 
-+	.align	5
-+ENTRY(feroceon_range_dma_clean_range)
-+	mrs	r2, cpsr
-+	cmp	r1, r0
-+	subne	r1, r1, #1			@ top address is inclusive
-+	orr	r3, r2, #PSR_I_BIT
-+	msr	cpsr_c, r3			@ disable interrupts
-+	mcr	p15, 5, r0, c15, c13, 0		@ D clean range start
-+	mcr	p15, 5, r1, c15, c13, 1		@ D clean range top
-+	msr	cpsr_c, r2			@ restore interrupts
-+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-+	mov	pc, lr
-+
- /*
-  *	dma_flush_range(start, end)
-  *
-@@ -274,6 +352,19 @@ ENTRY(feroceon_dma_flush_range)
- 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
- 	mov	pc, lr
- 
-+	.align	5
-+ENTRY(feroceon_range_dma_flush_range)
-+	mrs	r2, cpsr
-+	cmp	r1, r0
-+	subne	r1, r1, #1			@ top address is inclusive
-+	orr	r3, r2, #PSR_I_BIT
-+	msr	cpsr_c, r3			@ disable interrupts
-+	mcr	p15, 5, r0, c15, c15, 0		@ D clean/inv range start
-+	mcr	p15, 5, r1, c15, c15, 1		@ D clean/inv range top
-+	msr	cpsr_c, r2			@ restore interrupts
-+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-+	mov	pc, lr
-+
- ENTRY(feroceon_cache_fns)
- 	.long	feroceon_flush_kern_cache_all
- 	.long	feroceon_flush_user_cache_all
-@@ -285,12 +376,33 @@ ENTRY(feroceon_cache_fns)
- 	.long	feroceon_dma_clean_range
- 	.long	feroceon_dma_flush_range
- 
-+ENTRY(feroceon_range_cache_fns)
-+	.long	feroceon_flush_kern_cache_all
-+	.long	feroceon_flush_user_cache_all
-+	.long	feroceon_flush_user_cache_range
-+	.long	feroceon_coherent_kern_range
-+	.long	feroceon_coherent_user_range
-+	.long	feroceon_range_flush_kern_dcache_page
-+	.long	feroceon_range_dma_inv_range
-+	.long	feroceon_range_dma_clean_range
-+	.long	feroceon_range_dma_flush_range
-+
- 	.align	5
- ENTRY(cpu_feroceon_dcache_clean_area)
-+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
-+	mov	r2, r0
-+	mov	r3, r1
-+#endif
- 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
- 	add	r0, r0, #CACHE_DLINESIZE
- 	subs	r1, r1, #CACHE_DLINESIZE
- 	bhi	1b
-+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
-+1:	mcr	p15, 1, r2, c15, c9, 1		@ clean L2 entry
-+	add	r2, r2, #CACHE_DLINESIZE
-+	subs	r3, r3, #CACHE_DLINESIZE
-+	bhi	1b
-+#endif
- 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
- 	mov	pc, lr
- 
-@@ -306,16 +418,25 @@ ENTRY(cpu_feroceon_dcache_clean_area)
- 	.align	5
- ENTRY(cpu_feroceon_switch_mm)
- #ifdef CONFIG_MMU
--	mov	ip, #0
--@ && 'Clean & Invalidate whole DCache'
--1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
--	bne	1b
--	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
--	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-+	/*
-+	 * Note: we wish to call __flush_whole_cache but we need to preserve
-+	 * lr to do so.  The only way without touching main memory is to
-+	 * use r2 which is normally used to test the VM_EXEC flag, and
-+	 * compensate locally for the skipped ops if it is not set.
-+	 */
-+	mov	r2, lr				@ abuse r2 to preserve lr
-+	bl	__flush_whole_cache
-+	@ if r2 contains the VM_EXEC bit then the next 2 ops are done already
-+	tst	r2, #VM_EXEC
-+	mcreq	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-+	mcreq	p15, 0, ip, c7, c10, 4		@ drain WB
-+
- 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
- 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
--#endif
-+	mov	pc, r2
-+#else
- 	mov	pc, lr
-+#endif
- 
- /*
-  * cpu_feroceon_set_pte_ext(ptep, pte, ext)
-@@ -345,6 +466,9 @@ ENTRY(cpu_feroceon_set_pte_ext)
- 	str	r2, [r0]			@ hardware version
- 	mov	r0, r0
- 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
-+	mcr	p15, 1, r0, c15, c9, 1		@ clean L2 entry
-+#endif
- 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
- #endif
- 	mov	pc, lr
-@@ -414,6 +538,21 @@ cpu_feroceon_name:
- 	.asciz	"Feroceon"
- 	.size	cpu_feroceon_name, . - cpu_feroceon_name
- 
-+	.type	cpu_88fr531_name, #object
-+cpu_88fr531_name:
-+	.asciz	"Feroceon 88FR531-vd"
-+	.size	cpu_88fr531_name, . - cpu_88fr531_name
-+
-+	.type	cpu_88fr571_name, #object
-+cpu_88fr571_name:
-+	.asciz	"Feroceon 88FR571-vd"
-+	.size	cpu_88fr571_name, . - cpu_88fr571_name
-+
-+	.type	cpu_88fr131_name, #object
-+cpu_88fr131_name:
-+	.asciz	"Feroceon 88FR131"
-+	.size	cpu_88fr131_name, . - cpu_88fr131_name
-+
- 	.align
- 
- 	.section ".proc.info.init", #alloc, #execinstr
-@@ -421,15 +560,15 @@ cpu_feroceon_name:
- #ifdef CONFIG_CPU_FEROCEON_OLD_ID
- 	.type	__feroceon_old_id_proc_info,#object
- __feroceon_old_id_proc_info:
--	.long	0x41069260
--	.long	0xfffffff0
--	.long   PMD_TYPE_SECT | \
-+	.long	0x41009260
-+	.long	0xff00fff0
-+	.long	PMD_TYPE_SECT | \
- 		PMD_SECT_BUFFERABLE | \
- 		PMD_SECT_CACHEABLE | \
- 		PMD_BIT4 | \
- 		PMD_SECT_AP_WRITE | \
- 		PMD_SECT_AP_READ
--	.long   PMD_TYPE_SECT | \
-+	.long	PMD_TYPE_SECT | \
- 		PMD_BIT4 | \
- 		PMD_SECT_AP_WRITE | \
- 		PMD_SECT_AP_READ
-@@ -445,17 +584,17 @@ __feroceon_old_id_proc_info:
- 	.size	__feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
- #endif
- 
--	.type	__feroceon_proc_info,#object
--__feroceon_proc_info:
-+	.type	__88fr531_proc_info,#object
-+__88fr531_proc_info:
- 	.long	0x56055310
- 	.long	0xfffffff0
--	.long   PMD_TYPE_SECT | \
-+	.long	PMD_TYPE_SECT | \
- 		PMD_SECT_BUFFERABLE | \
- 		PMD_SECT_CACHEABLE | \
- 		PMD_BIT4 | \
- 		PMD_SECT_AP_WRITE | \
- 		PMD_SECT_AP_READ
--	.long   PMD_TYPE_SECT | \
-+	.long	PMD_TYPE_SECT | \
- 		PMD_BIT4 | \
- 		PMD_SECT_AP_WRITE | \
- 		PMD_SECT_AP_READ
-@@ -463,9 +602,59 @@ __feroceon_proc_info:
- 	.long	cpu_arch_name
- 	.long	cpu_elf_name
- 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
--	.long	cpu_feroceon_name
-+	.long	cpu_88fr531_name
- 	.long	feroceon_processor_functions
- 	.long	v4wbi_tlb_fns
- 	.long	feroceon_user_fns
- 	.long	feroceon_cache_fns
--	.size	__feroceon_proc_info, . - __feroceon_proc_info
-+	.size	__88fr531_proc_info, . - __88fr531_proc_info
-+
-+	.type	__88fr571_proc_info,#object
-+__88fr571_proc_info:
-+	.long	0x56155710
-+	.long	0xfffffff0
-+	.long	PMD_TYPE_SECT | \
-+		PMD_SECT_BUFFERABLE | \
-+		PMD_SECT_CACHEABLE | \
-+		PMD_BIT4 | \
-+		PMD_SECT_AP_WRITE | \
-+		PMD_SECT_AP_READ
-+	.long	PMD_TYPE_SECT | \
-+		PMD_BIT4 | \
-+		PMD_SECT_AP_WRITE | \
-+		PMD_SECT_AP_READ
-+	b	__feroceon_setup
-+	.long	cpu_arch_name
-+	.long	cpu_elf_name
-+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-+	.long	cpu_88fr571_name
-+	.long	feroceon_processor_functions
-+	.long	v4wbi_tlb_fns
-+	.long	feroceon_user_fns
-+	.long	feroceon_range_cache_fns
-+	.size	__88fr571_proc_info, . - __88fr571_proc_info
-+
-+	.type	__88fr131_proc_info,#object
-+__88fr131_proc_info:
-+	.long	0x56251310
-+	.long	0xfffffff0
-+	.long	PMD_TYPE_SECT | \
-+		PMD_SECT_BUFFERABLE | \
-+		PMD_SECT_CACHEABLE | \
-+		PMD_BIT4 | \
-+		PMD_SECT_AP_WRITE | \
-+		PMD_SECT_AP_READ
-+	.long	PMD_TYPE_SECT | \
-+		PMD_BIT4 | \
-+		PMD_SECT_AP_WRITE | \
-+		PMD_SECT_AP_READ
-+	b	__feroceon_setup
-+	.long	cpu_arch_name
-+	.long	cpu_elf_name
-+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-+	.long	cpu_88fr131_name
-+	.long	feroceon_processor_functions
-+	.long	v4wbi_tlb_fns
-+	.long	feroceon_user_fns
-+	.long	feroceon_range_cache_fns
-+	.size	__88fr131_proc_info, . - __88fr131_proc_info
---- a/arch/arm/plat-orion/irq.c
-+++ b/arch/arm/plat-orion/irq.c
-@@ -36,8 +36,8 @@ static void orion_irq_unmask(u32 irq)
- 
- static struct irq_chip orion_irq_chip = {
- 	.name		= "orion_irq",
--	.ack		= orion_irq_mask,
- 	.mask		= orion_irq_mask,
-+	.mask_ack	= orion_irq_mask,
- 	.unmask		= orion_irq_unmask,
- };
- 
-@@ -59,6 +59,7 @@ void __init orion_irq_init(unsigned int 
- 		set_irq_chip(irq, &orion_irq_chip);
- 		set_irq_chip_data(irq, maskaddr);
- 		set_irq_handler(irq, handle_level_irq);
-+		irq_desc[irq].status |= IRQ_LEVEL;
- 		set_irq_flags(irq, IRQF_VALID);
- 	}
- }
---- a/arch/arm/plat-orion/pcie.c
-+++ b/arch/arm/plat-orion/pcie.c
-@@ -39,6 +39,7 @@
- #define PCIE_CONF_DATA_OFF	0x18fc
- #define PCIE_MASK_OFF		0x1910
- #define PCIE_CTRL_OFF		0x1a00
-+#define  PCIE_CTRL_X1_MODE		0x0001
- #define PCIE_STAT_OFF		0x1a04
- #define  PCIE_STAT_DEV_OFFS		20
- #define  PCIE_STAT_DEV_MASK		0x1f
-@@ -62,6 +63,11 @@ int orion_pcie_link_up(void __iomem *bas
- 	return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
- }
- 
-+int __init orion_pcie_x4_mode(void __iomem *base)
-+{
-+	return !(readl(base + PCIE_CTRL_OFF) & PCIE_CTRL_X1_MODE);
-+}
-+
- int orion_pcie_get_local_bus_nr(void __iomem *base)
- {
- 	u32 stat = readl(base + PCIE_STAT_OFF);
---- a/arch/arm/plat-orion/time.c
-+++ b/arch/arm/plat-orion/time.c
-@@ -74,7 +74,7 @@ orion_clkevt_next_event(unsigned long de
- 	/*
- 	 * Clear and enable clockevent timer interrupt.
- 	 */
--	writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
-+	writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
- 
- 	u = readl(BRIDGE_MASK);
- 	u |= BRIDGE_INT_TIMER1;
-@@ -138,7 +138,7 @@ orion_clkevt_mode(enum clock_event_mode 
- 		/*
- 		 * ACK pending timer interrupt.
- 		 */
--		writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
-+		writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
- 
- 	}
- 	local_irq_restore(flags);
-@@ -159,7 +159,7 @@ static irqreturn_t orion_timer_interrupt
- 	/*
- 	 * ACK timer interrupt and call event handler.
- 	 */
--	writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
-+	writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
- 	orion_clkevt.event_handler(&orion_clkevt);
- 
- 	return IRQ_HANDLED;
---- a/drivers/net/mv643xx_eth.c
-+++ b/drivers/net/mv643xx_eth.c
-@@ -34,406 +34,145 @@
-  * along with this program; if not, write to the Free Software
-  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-  */
-+
- #include <linux/init.h>
- #include <linux/dma-mapping.h>
- #include <linux/in.h>
--#include <linux/ip.h>
- #include <linux/tcp.h>
- #include <linux/udp.h>
- #include <linux/etherdevice.h>
--
--#include <linux/bitops.h>
- #include <linux/delay.h>
- #include <linux/ethtool.h>
- #include <linux/platform_device.h>
--
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/spinlock.h>
- #include <linux/workqueue.h>
- #include <linux/mii.h>
--
- #include <linux/mv643xx_eth.h>
--
- #include <asm/io.h>
- #include <asm/types.h>
--#include <asm/pgtable.h>
- #include <asm/system.h>
--#include <asm/delay.h>
--#include <asm/dma-mapping.h>
- 
--#define MV643XX_CHECKSUM_OFFLOAD_TX
--#define MV643XX_NAPI
--#define MV643XX_TX_FAST_REFILL
--#undef	MV643XX_COAL
--
--#define MV643XX_TX_COAL 100
--#ifdef MV643XX_COAL
--#define MV643XX_RX_COAL 100
--#endif
-+static char mv643xx_eth_driver_name[] = "mv643xx_eth";
-+static char mv643xx_eth_driver_version[] = "1.1";
- 
--#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
-+#define MV643XX_ETH_CHECKSUM_OFFLOAD_TX
-+#define MV643XX_ETH_NAPI
-+#define MV643XX_ETH_TX_FAST_REFILL
-+
-+#ifdef MV643XX_ETH_CHECKSUM_OFFLOAD_TX
- #define MAX_DESCS_PER_SKB	(MAX_SKB_FRAGS + 1)
- #else
- #define MAX_DESCS_PER_SKB	1
- #endif
- 
--#define ETH_VLAN_HLEN		4
--#define ETH_FCS_LEN		4
--#define ETH_HW_IP_ALIGN		2		/* hw aligns IP header */
--#define ETH_WRAPPER_LEN		(ETH_HW_IP_ALIGN + ETH_HLEN + \
--					ETH_VLAN_HLEN + ETH_FCS_LEN)
--#define ETH_RX_SKB_SIZE		(dev->mtu + ETH_WRAPPER_LEN + \
--					dma_get_cache_alignment())
--
- /*
-  * Registers shared between all ports.
-  */
--#define PHY_ADDR_REG				0x0000
--#define SMI_REG					0x0004
--#define WINDOW_BASE(i)				(0x0200 + ((i) << 3))
--#define WINDOW_SIZE(i)				(0x0204 + ((i) << 3))
--#define WINDOW_REMAP_HIGH(i)			(0x0280 + ((i) << 2))
--#define WINDOW_BAR_ENABLE			0x0290
--#define WINDOW_PROTECT(i)			(0x0294 + ((i) << 4))
-+#define PHY_ADDR			0x0000
-+#define SMI_REG				0x0004
-+#define WINDOW_BASE(w)			(0x0200 + ((w) << 3))
-+#define WINDOW_SIZE(w)			(0x0204 + ((w) << 3))
-+#define WINDOW_REMAP_HIGH(w)		(0x0280 + ((w) << 2))
-+#define WINDOW_BAR_ENABLE		0x0290
-+#define WINDOW_PROTECT(w)		(0x0294 + ((w) << 4))
- 
- /*
-  * Per-port registers.
-  */
--#define PORT_CONFIG_REG(p)				(0x0400 + ((p) << 10))
--#define PORT_CONFIG_EXTEND_REG(p)			(0x0404 + ((p) << 10))
--#define MAC_ADDR_LOW(p)					(0x0414 + ((p) << 10))
--#define MAC_ADDR_HIGH(p)				(0x0418 + ((p) << 10))
--#define SDMA_CONFIG_REG(p)				(0x041c + ((p) << 10))
--#define PORT_SERIAL_CONTROL_REG(p)			(0x043c + ((p) << 10))
--#define PORT_STATUS_REG(p)				(0x0444 + ((p) << 10))
--#define TRANSMIT_QUEUE_COMMAND_REG(p)			(0x0448 + ((p) << 10))
--#define MAXIMUM_TRANSMIT_UNIT(p)			(0x0458 + ((p) << 10))
--#define INTERRUPT_CAUSE_REG(p)				(0x0460 + ((p) << 10))
--#define INTERRUPT_CAUSE_EXTEND_REG(p)			(0x0464 + ((p) << 10))
--#define INTERRUPT_MASK_REG(p)				(0x0468 + ((p) << 10))
--#define INTERRUPT_EXTEND_MASK_REG(p)			(0x046c + ((p) << 10))
--#define TX_FIFO_URGENT_THRESHOLD_REG(p)			(0x0474 + ((p) << 10))
--#define RX_CURRENT_QUEUE_DESC_PTR_0(p)			(0x060c + ((p) << 10))
--#define RECEIVE_QUEUE_COMMAND_REG(p)			(0x0680 + ((p) << 10))
--#define TX_CURRENT_QUEUE_DESC_PTR_0(p)			(0x06c0 + ((p) << 10))
--#define MIB_COUNTERS_BASE(p)				(0x1000 + ((p) << 7))
--#define DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(p)	(0x1400 + ((p) << 10))
--#define DA_FILTER_OTHER_MULTICAST_TABLE_BASE(p)		(0x1500 + ((p) << 10))
--#define DA_FILTER_UNICAST_TABLE_BASE(p)			(0x1600 + ((p) << 10))
--
--/* These macros describe Ethernet Port configuration reg (Px_cR) bits */
--#define UNICAST_NORMAL_MODE		(0 << 0)
--#define UNICAST_PROMISCUOUS_MODE	(1 << 0)
--#define DEFAULT_RX_QUEUE(queue)		((queue) << 1)
--#define DEFAULT_RX_ARP_QUEUE(queue)	((queue) << 4)
--#define RECEIVE_BC_IF_NOT_IP_OR_ARP	(0 << 7)
--#define REJECT_BC_IF_NOT_IP_OR_ARP	(1 << 7)
--#define RECEIVE_BC_IF_IP		(0 << 8)
--#define REJECT_BC_IF_IP			(1 << 8)
--#define RECEIVE_BC_IF_ARP		(0 << 9)
--#define REJECT_BC_IF_ARP		(1 << 9)
--#define TX_AM_NO_UPDATE_ERROR_SUMMARY	(1 << 12)
--#define CAPTURE_TCP_FRAMES_DIS		(0 << 14)
--#define CAPTURE_TCP_FRAMES_EN		(1 << 14)
--#define CAPTURE_UDP_FRAMES_DIS		(0 << 15)
--#define CAPTURE_UDP_FRAMES_EN		(1 << 15)
--#define DEFAULT_RX_TCP_QUEUE(queue)	((queue) << 16)
--#define DEFAULT_RX_UDP_QUEUE(queue)	((queue) << 19)
--#define DEFAULT_RX_BPDU_QUEUE(queue)	((queue) << 22)
--
--#define PORT_CONFIG_DEFAULT_VALUE			\
--		UNICAST_NORMAL_MODE		|	\
--		DEFAULT_RX_QUEUE(0)		|	\
--		DEFAULT_RX_ARP_QUEUE(0)		|	\
--		RECEIVE_BC_IF_NOT_IP_OR_ARP	|	\
--		RECEIVE_BC_IF_IP		|	\
--		RECEIVE_BC_IF_ARP		|	\
--		CAPTURE_TCP_FRAMES_DIS		|	\
--		CAPTURE_UDP_FRAMES_DIS		|	\
--		DEFAULT_RX_TCP_QUEUE(0)		|	\
--		DEFAULT_RX_UDP_QUEUE(0)		|	\
--		DEFAULT_RX_BPDU_QUEUE(0)
--
--/* These macros describe Ethernet Port configuration extend reg (Px_cXR) bits*/
--#define CLASSIFY_EN				(1 << 0)
--#define SPAN_BPDU_PACKETS_AS_NORMAL		(0 << 1)
--#define SPAN_BPDU_PACKETS_TO_RX_QUEUE_7		(1 << 1)
--#define PARTITION_DISABLE			(0 << 2)
--#define PARTITION_ENABLE			(1 << 2)
--
--#define PORT_CONFIG_EXTEND_DEFAULT_VALUE		\
--		SPAN_BPDU_PACKETS_AS_NORMAL	|	\
--		PARTITION_DISABLE
--
--/* These macros describe Ethernet Port Sdma configuration reg (SDCR) bits */
--#define RIFB				(1 << 0)
--#define RX_BURST_SIZE_1_64BIT		(0 << 1)
--#define RX_BURST_SIZE_2_64BIT		(1 << 1)
-+#define PORT_CONFIG(p)			(0x0400 + ((p) << 10))
-+#define  UNICAST_PROMISCUOUS_MODE	0x00000001
-+#define PORT_CONFIG_EXT(p)		(0x0404 + ((p) << 10))
-+#define MAC_ADDR_LOW(p)			(0x0414 + ((p) << 10))
-+#define MAC_ADDR_HIGH(p)		(0x0418 + ((p) << 10))
-+#define SDMA_CONFIG(p)			(0x041c + ((p) << 10))
-+#define PORT_SERIAL_CONTROL(p)		(0x043c + ((p) << 10))
-+#define PORT_STATUS(p)			(0x0444 + ((p) << 10))
-+#define  TX_FIFO_EMPTY			0x00000400
-+#define TXQ_COMMAND(p)			(0x0448 + ((p) << 10))
-+#define TXQ_FIX_PRIO_CONF(p)		(0x044c + ((p) << 10))
-+#define TX_BW_RATE(p)			(0x0450 + ((p) << 10))
-+#define TX_BW_MTU(p)			(0x0458 + ((p) << 10))
-+#define TX_BW_BURST(p)			(0x045c + ((p) << 10))
-+#define INT_CAUSE(p)			(0x0460 + ((p) << 10))
-+#define  INT_TX_END			0x07f80000
-+#define  INT_RX				0x0007fbfc
-+#define  INT_EXT			0x00000002
-+#define INT_CAUSE_EXT(p)		(0x0464 + ((p) << 10))
-+#define  INT_EXT_LINK			0x00100000
-+#define  INT_EXT_PHY			0x00010000
-+#define  INT_EXT_TX_ERROR_0		0x00000100
-+#define  INT_EXT_TX_0			0x00000001
-+#define  INT_EXT_TX			0x0000ffff
-+#define INT_MASK(p)			(0x0468 + ((p) << 10))
-+#define INT_MASK_EXT(p)			(0x046c + ((p) << 10))
-+#define TX_FIFO_URGENT_THRESHOLD(p)	(0x0474 + ((p) << 10))
-+#define TXQ_FIX_PRIO_CONF_MOVED(p)	(0x04dc + ((p) << 10))
-+#define TX_BW_RATE_MOVED(p)		(0x04e0 + ((p) << 10))
-+#define TX_BW_MTU_MOVED(p)		(0x04e8 + ((p) << 10))
-+#define TX_BW_BURST_MOVED(p)		(0x04ec + ((p) << 10))
-+#define RXQ_CURRENT_DESC_PTR(p, q)	(0x060c + ((p) << 10) + ((q) << 4))
-+#define RXQ_COMMAND(p)			(0x0680 + ((p) << 10))
-+#define TXQ_CURRENT_DESC_PTR(p, q)	(0x06c0 + ((p) << 10) + ((q) << 2))
-+#define TXQ_BW_TOKENS(p, q)		(0x0700 + ((p) << 10) + ((q) << 4))
-+#define TXQ_BW_CONF(p, q)		(0x0704 + ((p) << 10) + ((q) << 4))
-+#define TXQ_BW_WRR_CONF(p, q)		(0x0708 + ((p) << 10) + ((q) << 4))
-+#define MIB_COUNTERS(p)			(0x1000 + ((p) << 7))
-+#define SPECIAL_MCAST_TABLE(p)		(0x1400 + ((p) << 10))
-+#define OTHER_MCAST_TABLE(p)		(0x1500 + ((p) << 10))
-+#define UNICAST_TABLE(p)		(0x1600 + ((p) << 10))
-+
-+
-+/*
-+ * SDMA configuration register.
-+ */
- #define RX_BURST_SIZE_4_64BIT		(2 << 1)
--#define RX_BURST_SIZE_8_64BIT		(3 << 1)
--#define RX_BURST_SIZE_16_64BIT		(4 << 1)
- #define BLM_RX_NO_SWAP			(1 << 4)
--#define BLM_RX_BYTE_SWAP		(0 << 4)
- #define BLM_TX_NO_SWAP			(1 << 5)
--#define BLM_TX_BYTE_SWAP		(0 << 5)
--#define DESCRIPTORS_BYTE_SWAP		(1 << 6)
--#define DESCRIPTORS_NO_SWAP		(0 << 6)
--#define IPG_INT_RX(value)		(((value) & 0x3fff) << 8)
--#define TX_BURST_SIZE_1_64BIT		(0 << 22)
--#define TX_BURST_SIZE_2_64BIT		(1 << 22)
- #define TX_BURST_SIZE_4_64BIT		(2 << 22)
--#define TX_BURST_SIZE_8_64BIT		(3 << 22)
--#define TX_BURST_SIZE_16_64BIT		(4 << 22)
- 
- #if defined(__BIG_ENDIAN)
- #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
- 		RX_BURST_SIZE_4_64BIT	|	\
--		IPG_INT_RX(0)		|	\
- 		TX_BURST_SIZE_4_64BIT
- #elif defined(__LITTLE_ENDIAN)
- #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
- 		RX_BURST_SIZE_4_64BIT	|	\
- 		BLM_RX_NO_SWAP		|	\
- 		BLM_TX_NO_SWAP		|	\
--		IPG_INT_RX(0)		|	\
- 		TX_BURST_SIZE_4_64BIT
- #else
- #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
- #endif
- 
--/* These macros describe Ethernet Port serial control reg (PSCR) bits */
--#define SERIAL_PORT_DISABLE			(0 << 0)
--#define SERIAL_PORT_ENABLE			(1 << 0)
--#define DO_NOT_FORCE_LINK_PASS			(0 << 1)
--#define FORCE_LINK_PASS				(1 << 1)
--#define ENABLE_AUTO_NEG_FOR_DUPLX		(0 << 2)
--#define DISABLE_AUTO_NEG_FOR_DUPLX		(1 << 2)
--#define ENABLE_AUTO_NEG_FOR_FLOW_CTRL		(0 << 3)
--#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL		(1 << 3)
--#define ADV_NO_FLOW_CTRL			(0 << 4)
--#define ADV_SYMMETRIC_FLOW_CTRL			(1 << 4)
--#define FORCE_FC_MODE_NO_PAUSE_DIS_TX		(0 << 5)
--#define FORCE_FC_MODE_TX_PAUSE_DIS		(1 << 5)
--#define FORCE_BP_MODE_NO_JAM			(0 << 7)
--#define FORCE_BP_MODE_JAM_TX			(1 << 7)
--#define FORCE_BP_MODE_JAM_TX_ON_RX_ERR		(2 << 7)
--#define SERIAL_PORT_CONTROL_RESERVED		(1 << 9)
--#define FORCE_LINK_FAIL				(0 << 10)
--#define DO_NOT_FORCE_LINK_FAIL			(1 << 10)
--#define RETRANSMIT_16_ATTEMPTS			(0 << 11)
--#define RETRANSMIT_FOREVER			(1 << 11)
--#define ENABLE_AUTO_NEG_SPEED_GMII		(0 << 13)
--#define DISABLE_AUTO_NEG_SPEED_GMII		(1 << 13)
--#define DTE_ADV_0				(0 << 14)
--#define DTE_ADV_1				(1 << 14)
--#define DISABLE_AUTO_NEG_BYPASS			(0 << 15)
--#define ENABLE_AUTO_NEG_BYPASS			(1 << 15)
--#define AUTO_NEG_NO_CHANGE			(0 << 16)
--#define RESTART_AUTO_NEG			(1 << 16)
--#define MAX_RX_PACKET_1518BYTE			(0 << 17)
-+
-+/*
-+ * Port serial control register.
-+ */
-+#define SET_MII_SPEED_TO_100			(1 << 24)
-+#define SET_GMII_SPEED_TO_1000			(1 << 23)
-+#define SET_FULL_DUPLEX_MODE			(1 << 21)
- #define MAX_RX_PACKET_1522BYTE			(1 << 17)
--#define MAX_RX_PACKET_1552BYTE			(2 << 17)
--#define MAX_RX_PACKET_9022BYTE			(3 << 17)
--#define MAX_RX_PACKET_9192BYTE			(4 << 17)
- #define MAX_RX_PACKET_9700BYTE			(5 << 17)
- #define MAX_RX_PACKET_MASK			(7 << 17)
--#define CLR_EXT_LOOPBACK			(0 << 20)
--#define SET_EXT_LOOPBACK			(1 << 20)
--#define SET_HALF_DUPLEX_MODE			(0 << 21)
--#define SET_FULL_DUPLEX_MODE			(1 << 21)
--#define DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	(0 << 22)
--#define ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	(1 << 22)
--#define SET_GMII_SPEED_TO_10_100		(0 << 23)
--#define SET_GMII_SPEED_TO_1000			(1 << 23)
--#define SET_MII_SPEED_TO_10			(0 << 24)
--#define SET_MII_SPEED_TO_100			(1 << 24)
-+#define DISABLE_AUTO_NEG_SPEED_GMII		(1 << 13)
-+#define DO_NOT_FORCE_LINK_FAIL			(1 << 10)
-+#define SERIAL_PORT_CONTROL_RESERVED		(1 << 9)
-+#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL		(1 << 3)
-+#define DISABLE_AUTO_NEG_FOR_DUPLEX		(1 << 2)
-+#define FORCE_LINK_PASS				(1 << 1)
-+#define SERIAL_PORT_ENABLE			(1 << 0)
-+
-+#define DEFAULT_RX_QUEUE_SIZE		400
-+#define DEFAULT_TX_QUEUE_SIZE		800
- 
--#define PORT_SERIAL_CONTROL_DEFAULT_VALUE		\
--		DO_NOT_FORCE_LINK_PASS		|	\
--		ENABLE_AUTO_NEG_FOR_DUPLX	|	\
--		DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
--		ADV_SYMMETRIC_FLOW_CTRL		|	\
--		FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
--		FORCE_BP_MODE_NO_JAM		|	\
--		(1 << 9) /* reserved */		|	\
--		DO_NOT_FORCE_LINK_FAIL		|	\
--		RETRANSMIT_16_ATTEMPTS		|	\
--		ENABLE_AUTO_NEG_SPEED_GMII	|	\
--		DTE_ADV_0			|	\
--		DISABLE_AUTO_NEG_BYPASS		|	\
--		AUTO_NEG_NO_CHANGE		|	\
--		MAX_RX_PACKET_9700BYTE		|	\
--		CLR_EXT_LOOPBACK		|	\
--		SET_FULL_DUPLEX_MODE		|	\
--		ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
--
--/* These macros describe Ethernet Serial Status reg (PSR) bits */
--#define PORT_STATUS_MODE_10_BIT		(1 << 0)
--#define PORT_STATUS_LINK_UP		(1 << 1)
--#define PORT_STATUS_FULL_DUPLEX		(1 << 2)
--#define PORT_STATUS_FLOW_CONTROL	(1 << 3)
--#define PORT_STATUS_GMII_1000		(1 << 4)
--#define PORT_STATUS_MII_100		(1 << 5)
--/* PSR bit 6 is undocumented */
--#define PORT_STATUS_TX_IN_PROGRESS	(1 << 7)
--#define PORT_STATUS_AUTONEG_BYPASSED	(1 << 8)
--#define PORT_STATUS_PARTITION		(1 << 9)
--#define PORT_STATUS_TX_FIFO_EMPTY	(1 << 10)
--/* PSR bits 11-31 are reserved */
--
--#define PORT_DEFAULT_TRANSMIT_QUEUE_SIZE	800
--#define PORT_DEFAULT_RECEIVE_QUEUE_SIZE		400
--
--#define DESC_SIZE				64
--
--#define ETH_RX_QUEUES_ENABLED	(1 << 0)	/* use only Q0 for receive */
--#define ETH_TX_QUEUES_ENABLED	(1 << 0)	/* use only Q0 for transmit */
--
--#define ETH_INT_CAUSE_RX_DONE	(ETH_RX_QUEUES_ENABLED << 2)
--#define ETH_INT_CAUSE_RX_ERROR	(ETH_RX_QUEUES_ENABLED << 9)
--#define ETH_INT_CAUSE_RX	(ETH_INT_CAUSE_RX_DONE | ETH_INT_CAUSE_RX_ERROR)
--#define ETH_INT_CAUSE_EXT	0x00000002
--#define ETH_INT_UNMASK_ALL	(ETH_INT_CAUSE_RX | ETH_INT_CAUSE_EXT)
--
--#define ETH_INT_CAUSE_TX_DONE	(ETH_TX_QUEUES_ENABLED << 0)
--#define ETH_INT_CAUSE_TX_ERROR	(ETH_TX_QUEUES_ENABLED << 8)
--#define ETH_INT_CAUSE_TX	(ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR)
--#define ETH_INT_CAUSE_PHY	0x00010000
--#define ETH_INT_CAUSE_STATE	0x00100000
--#define ETH_INT_UNMASK_ALL_EXT	(ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \
--					ETH_INT_CAUSE_STATE)
--
--#define ETH_INT_MASK_ALL	0x00000000
--#define ETH_INT_MASK_ALL_EXT	0x00000000
--
--#define PHY_WAIT_ITERATIONS	1000	/* 1000 iterations * 10uS = 10mS max */
--#define PHY_WAIT_MICRO_SECONDS	10
--
--/* Buffer offset from buffer pointer */
--#define RX_BUF_OFFSET				0x2
--
--/* Gigabit Ethernet Unit Global Registers */
--
--/* MIB Counters register definitions */
--#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW	0x0
--#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH	0x4
--#define ETH_MIB_BAD_OCTETS_RECEIVED		0x8
--#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR	0xc
--#define ETH_MIB_GOOD_FRAMES_RECEIVED		0x10
--#define ETH_MIB_BAD_FRAMES_RECEIVED		0x14
--#define ETH_MIB_BROADCAST_FRAMES_RECEIVED	0x18
--#define ETH_MIB_MULTICAST_FRAMES_RECEIVED	0x1c
--#define ETH_MIB_FRAMES_64_OCTETS		0x20
--#define ETH_MIB_FRAMES_65_TO_127_OCTETS		0x24
--#define ETH_MIB_FRAMES_128_TO_255_OCTETS	0x28
--#define ETH_MIB_FRAMES_256_TO_511_OCTETS	0x2c
--#define ETH_MIB_FRAMES_512_TO_1023_OCTETS	0x30
--#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS	0x34
--#define ETH_MIB_GOOD_OCTETS_SENT_LOW		0x38
--#define ETH_MIB_GOOD_OCTETS_SENT_HIGH		0x3c
--#define ETH_MIB_GOOD_FRAMES_SENT		0x40
--#define ETH_MIB_EXCESSIVE_COLLISION		0x44
--#define ETH_MIB_MULTICAST_FRAMES_SENT		0x48
--#define ETH_MIB_BROADCAST_FRAMES_SENT		0x4c
--#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED	0x50
--#define ETH_MIB_FC_SENT				0x54
--#define ETH_MIB_GOOD_FC_RECEIVED		0x58
--#define ETH_MIB_BAD_FC_RECEIVED			0x5c
--#define ETH_MIB_UNDERSIZE_RECEIVED		0x60
--#define ETH_MIB_FRAGMENTS_RECEIVED		0x64
--#define ETH_MIB_OVERSIZE_RECEIVED		0x68
--#define ETH_MIB_JABBER_RECEIVED			0x6c
--#define ETH_MIB_MAC_RECEIVE_ERROR		0x70
--#define ETH_MIB_BAD_CRC_EVENT			0x74
--#define ETH_MIB_COLLISION			0x78
--#define ETH_MIB_LATE_COLLISION			0x7c
--
--/* Port serial status reg (PSR) */
--#define ETH_INTERFACE_PCM			0x00000001
--#define ETH_LINK_IS_UP				0x00000002
--#define ETH_PORT_AT_FULL_DUPLEX			0x00000004
--#define ETH_RX_FLOW_CTRL_ENABLED		0x00000008
--#define ETH_GMII_SPEED_1000			0x00000010
--#define ETH_MII_SPEED_100			0x00000020
--#define ETH_TX_IN_PROGRESS			0x00000080
--#define ETH_BYPASS_ACTIVE			0x00000100
--#define ETH_PORT_AT_PARTITION_STATE		0x00000200
--#define ETH_PORT_TX_FIFO_EMPTY			0x00000400
--
--/* SMI reg */
--#define ETH_SMI_BUSY		0x10000000	/* 0 - Write, 1 - Read	*/
--#define ETH_SMI_READ_VALID	0x08000000	/* 0 - Write, 1 - Read	*/
--#define ETH_SMI_OPCODE_WRITE	0		/* Completion of Read	*/
--#define ETH_SMI_OPCODE_READ	0x04000000	/* Operation is in progress */
--
--/* Interrupt Cause Register Bit Definitions */
--
--/* SDMA command status fields macros */
--
--/* Tx & Rx descriptors status */
--#define ETH_ERROR_SUMMARY			0x00000001
--
--/* Tx & Rx descriptors command */
--#define ETH_BUFFER_OWNED_BY_DMA			0x80000000
--
--/* Tx descriptors status */
--#define ETH_LC_ERROR				0
--#define ETH_UR_ERROR				0x00000002
--#define ETH_RL_ERROR				0x00000004
--#define ETH_LLC_SNAP_FORMAT			0x00000200
--
--/* Rx descriptors status */
--#define ETH_OVERRUN_ERROR			0x00000002
--#define ETH_MAX_FRAME_LENGTH_ERROR		0x00000004
--#define ETH_RESOURCE_ERROR			0x00000006
--#define ETH_VLAN_TAGGED				0x00080000
--#define ETH_BPDU_FRAME				0x00100000
--#define ETH_UDP_FRAME_OVER_IP_V_4		0x00200000
--#define ETH_OTHER_FRAME_TYPE			0x00400000
--#define ETH_LAYER_2_IS_ETH_V_2			0x00800000
--#define ETH_FRAME_TYPE_IP_V_4			0x01000000
--#define ETH_FRAME_HEADER_OK			0x02000000
--#define ETH_RX_LAST_DESC			0x04000000
--#define ETH_RX_FIRST_DESC			0x08000000
--#define ETH_UNKNOWN_DESTINATION_ADDR		0x10000000
--#define ETH_RX_ENABLE_INTERRUPT			0x20000000
--#define ETH_LAYER_4_CHECKSUM_OK			0x40000000
--
--/* Rx descriptors byte count */
--#define ETH_FRAME_FRAGMENTED			0x00000004
--
--/* Tx descriptors command */
--#define ETH_LAYER_4_CHECKSUM_FIRST_DESC		0x00000400
--#define ETH_FRAME_SET_TO_VLAN			0x00008000
--#define ETH_UDP_FRAME				0x00010000
--#define ETH_GEN_TCP_UDP_CHECKSUM		0x00020000
--#define ETH_GEN_IP_V_4_CHECKSUM			0x00040000
--#define ETH_ZERO_PADDING			0x00080000
--#define ETH_TX_LAST_DESC			0x00100000
--#define ETH_TX_FIRST_DESC			0x00200000
--#define ETH_GEN_CRC				0x00400000
--#define ETH_TX_ENABLE_INTERRUPT			0x00800000
--#define ETH_AUTO_MODE				0x40000000
--
--#define ETH_TX_IHL_SHIFT			11
--
--/* typedefs */
--
--typedef enum _eth_func_ret_status {
--	ETH_OK,			/* Returned as expected.		*/
--	ETH_ERROR,		/* Fundamental error.			*/
--	ETH_RETRY,		/* Could not process request. Try later.*/
--	ETH_END_OF_JOB,		/* Ring has nothing to process.		*/
--	ETH_QUEUE_FULL,		/* Ring resource error.			*/
--	ETH_QUEUE_LAST_RESOURCE	/* Ring resources about to exhaust.	*/
--} ETH_FUNC_RET_STATUS;
- 
--/* These are for big-endian machines.  Little endian needs different
-- * definitions.
-+/*
-+ * RX/TX descriptors.
-  */
- #if defined(__BIG_ENDIAN)
--struct eth_rx_desc {
-+struct rx_desc {
- 	u16 byte_cnt;		/* Descriptor buffer byte count		*/
- 	u16 buf_size;		/* Buffer size				*/
- 	u32 cmd_sts;		/* Descriptor command status		*/
-@@ -441,7 +180,7 @@ struct eth_rx_desc {
- 	u32 buf_ptr;		/* Descriptor buffer pointer		*/
- };
- 
--struct eth_tx_desc {
-+struct tx_desc {
- 	u16 byte_cnt;		/* buffer byte count			*/
- 	u16 l4i_chk;		/* CPU provided TCP checksum		*/
- 	u32 cmd_sts;		/* Command/status field			*/
-@@ -449,7 +188,7 @@ struct eth_tx_desc {
- 	u32 buf_ptr;		/* pointer to buffer for this descriptor*/
- };
- #elif defined(__LITTLE_ENDIAN)
--struct eth_rx_desc {
-+struct rx_desc {
- 	u32 cmd_sts;		/* Descriptor command status		*/
- 	u16 buf_size;		/* Buffer size				*/
- 	u16 byte_cnt;		/* Descriptor buffer byte count		*/
-@@ -457,7 +196,7 @@ struct eth_rx_desc {
- 	u32 next_desc_ptr;	/* Next descriptor pointer		*/
- };
- 
--struct eth_tx_desc {
-+struct tx_desc {
- 	u32 cmd_sts;		/* Command/status field			*/
- 	u16 l4i_chk;		/* CPU provided TCP checksum		*/
- 	u16 byte_cnt;		/* buffer byte count			*/
-@@ -468,18 +207,59 @@ struct eth_tx_desc {
- #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
- #endif
- 
--/* Unified struct for Rx and Tx operations. The user is not required to	*/
--/* be familier with neither Tx nor Rx descriptors.			*/
--struct pkt_info {
--	unsigned short byte_cnt;	/* Descriptor buffer byte count	*/
--	unsigned short l4i_chk;		/* Tx CPU provided TCP Checksum	*/
--	unsigned int cmd_sts;		/* Descriptor command status	*/
--	dma_addr_t buf_ptr;		/* Descriptor buffer pointer	*/
--	struct sk_buff *return_info;	/* User resource return information */
-+/* RX & TX descriptor command */
-+#define BUFFER_OWNED_BY_DMA		0x80000000
-+
-+/* RX & TX descriptor status */
-+#define ERROR_SUMMARY			0x00000001
-+
-+/* RX descriptor status */
-+#define LAYER_4_CHECKSUM_OK		0x40000000
-+#define RX_ENABLE_INTERRUPT		0x20000000
-+#define RX_FIRST_DESC			0x08000000
-+#define RX_LAST_DESC			0x04000000
-+
-+/* TX descriptor command */
-+#define TX_ENABLE_INTERRUPT		0x00800000
-+#define GEN_CRC				0x00400000
-+#define TX_FIRST_DESC			0x00200000
-+#define TX_LAST_DESC			0x00100000
-+#define ZERO_PADDING			0x00080000
-+#define GEN_IP_V4_CHECKSUM		0x00040000
-+#define GEN_TCP_UDP_CHECKSUM		0x00020000
-+#define UDP_FRAME			0x00010000
-+
-+#define TX_IHL_SHIFT			11
-+
-+
-+/* global *******************************************************************/
-+struct mv643xx_eth_shared_private {
-+	/*
-+	 * Ethernet controller base address.
-+	 */
-+	void __iomem *base;
-+
-+	/*
-+	 * Protects access to SMI_REG, which is shared between ports.
-+	 */
-+	spinlock_t phy_lock;
-+
-+	/*
-+	 * Per-port MBUS window access register value.
-+	 */
-+	u32 win_protect;
-+
-+	/*
-+	 * Hardware-specific parameters.
-+	 */
-+	unsigned int t_clk;
-+	int extended_rx_coal_limit;
-+	int tx_bw_control_moved;
- };
- 
--/* Ethernet port specific information */
--struct mv643xx_mib_counters {
-+
-+/* per-port *****************************************************************/
-+struct mib_counters {
- 	u64 good_octets_received;
- 	u32 bad_octets_received;
- 	u32 internal_mac_transmit_err;
-@@ -512,461 +292,282 @@ struct mv643xx_mib_counters {
- 	u32 late_collision;
- };
- 
--struct mv643xx_shared_private {
--	void __iomem *eth_base;
--
--	/* used to protect SMI_REG, which is shared across ports */
--	spinlock_t phy_lock;
--
--	u32 win_protect;
--
--	unsigned int t_clk;
--};
--
--struct mv643xx_private {
--	struct mv643xx_shared_private *shared;
--	int port_num;			/* User Ethernet port number	*/
--
--	struct mv643xx_shared_private *shared_smi;
-+struct rx_queue {
-+	int index;
- 
--	u32 rx_sram_addr;		/* Base address of rx sram area */
--	u32 rx_sram_size;		/* Size of rx sram area		*/
--	u32 tx_sram_addr;		/* Base address of tx sram area */
--	u32 tx_sram_size;		/* Size of tx sram area		*/
-+	int rx_ring_size;
- 
--	int rx_resource_err;		/* Rx ring resource error flag */
-+	int rx_desc_count;
-+	int rx_curr_desc;
-+	int rx_used_desc;
- 
--	/* Tx/Rx rings managment indexes fields. For driver use */
-+	struct rx_desc *rx_desc_area;
-+	dma_addr_t rx_desc_dma;
-+	int rx_desc_area_size;
-+	struct sk_buff **rx_skb;
- 
--	/* Next available and first returning Rx resource */
--	int rx_curr_desc_q, rx_used_desc_q;
-+	struct timer_list rx_oom;
-+};
- 
--	/* Next available and first returning Tx resource */
--	int tx_curr_desc_q, tx_used_desc_q;
-+struct tx_queue {
-+	int index;
- 
--#ifdef MV643XX_TX_FAST_REFILL
--	u32 tx_clean_threshold;
--#endif
-+	int tx_ring_size;
- 
--	struct eth_rx_desc *p_rx_desc_area;
--	dma_addr_t rx_desc_dma;
--	int rx_desc_area_size;
--	struct sk_buff **rx_skb;
-+	int tx_desc_count;
-+	int tx_curr_desc;
-+	int tx_used_desc;
- 
--	struct eth_tx_desc *p_tx_desc_area;
-+	struct tx_desc *tx_desc_area;
- 	dma_addr_t tx_desc_dma;
- 	int tx_desc_area_size;
- 	struct sk_buff **tx_skb;
-+};
- 
--	struct work_struct tx_timeout_task;
-+struct mv643xx_eth_private {
-+	struct mv643xx_eth_shared_private *shared;
-+	int port_num;
- 
- 	struct net_device *dev;
--	struct napi_struct napi;
--	struct net_device_stats stats;
--	struct mv643xx_mib_counters mib_counters;
-+
-+	struct mv643xx_eth_shared_private *shared_smi;
-+	int phy_addr;
-+
- 	spinlock_t lock;
--	/* Size of Tx Ring per queue */
--	int tx_ring_size;
--	/* Number of tx descriptors in use */
--	int tx_desc_count;
--	/* Size of Rx Ring per queue */
--	int rx_ring_size;
--	/* Number of rx descriptors in use */
--	int rx_desc_count;
-+
-+	struct mib_counters mib_counters;
-+	struct work_struct tx_timeout_task;
-+	struct mii_if_info mii;
- 
- 	/*
--	 * Used in case RX Ring is empty, which can be caused when
--	 * system does not have resources (skb's)
-+	 * RX state.
- 	 */
--	struct timer_list timeout;
--
--	u32 rx_int_coal;
--	u32 tx_int_coal;
--	struct mii_if_info mii;
--};
-+	int default_rx_ring_size;
-+	unsigned long rx_desc_sram_addr;
-+	int rx_desc_sram_size;
-+	u8 rxq_mask;
-+	int rxq_primary;
-+	struct napi_struct napi;
-+	struct rx_queue rxq[8];
- 
--/* Static function declarations */
--static void eth_port_init(struct mv643xx_private *mp);
--static void eth_port_reset(struct mv643xx_private *mp);
--static void eth_port_start(struct net_device *dev);
--
--static void ethernet_phy_reset(struct mv643xx_private *mp);
--
--static void eth_port_write_smi_reg(struct mv643xx_private *mp,
--				   unsigned int phy_reg, unsigned int value);
--
--static void eth_port_read_smi_reg(struct mv643xx_private *mp,
--				  unsigned int phy_reg, unsigned int *value);
--
--static void eth_clear_mib_counters(struct mv643xx_private *mp);
--
--static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
--					    struct pkt_info *p_pkt_info);
--static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
--					      struct pkt_info *p_pkt_info);
--
--static void eth_port_uc_addr_get(struct mv643xx_private *mp,
--				 unsigned char *p_addr);
--static void eth_port_uc_addr_set(struct mv643xx_private *mp,
--				 unsigned char *p_addr);
--static void eth_port_set_multicast_list(struct net_device *);
--static void mv643xx_eth_port_enable_tx(struct mv643xx_private *mp,
--						unsigned int queues);
--static void mv643xx_eth_port_enable_rx(struct mv643xx_private *mp,
--						unsigned int queues);
--static unsigned int mv643xx_eth_port_disable_tx(struct mv643xx_private *mp);
--static unsigned int mv643xx_eth_port_disable_rx(struct mv643xx_private *mp);
--static int mv643xx_eth_open(struct net_device *);
--static int mv643xx_eth_stop(struct net_device *);
--static void eth_port_init_mac_tables(struct mv643xx_private *mp);
--#ifdef MV643XX_NAPI
--static int mv643xx_poll(struct napi_struct *napi, int budget);
-+	/*
-+	 * TX state.
-+	 */
-+	int default_tx_ring_size;
-+	unsigned long tx_desc_sram_addr;
-+	int tx_desc_sram_size;
-+	u8 txq_mask;
-+	int txq_primary;
-+	struct tx_queue txq[8];
-+#ifdef MV643XX_ETH_TX_FAST_REFILL
-+	int tx_clean_threshold;
- #endif
--static int ethernet_phy_get(struct mv643xx_private *mp);
--static void ethernet_phy_set(struct mv643xx_private *mp, int phy_addr);
--static int ethernet_phy_detect(struct mv643xx_private *mp);
--static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location);
--static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val);
--static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
--static const struct ethtool_ops mv643xx_ethtool_ops;
-+};
- 
--static char mv643xx_driver_name[] = "mv643xx_eth";
--static char mv643xx_driver_version[] = "1.0";
- 
--static inline u32 rdl(struct mv643xx_private *mp, int offset)
-+/* port register accessors **************************************************/
-+static inline u32 rdl(struct mv643xx_eth_private *mp, int offset)
- {
--	return readl(mp->shared->eth_base + offset);
-+	return readl(mp->shared->base + offset);
- }
- 
--static inline void wrl(struct mv643xx_private *mp, int offset, u32 data)
-+static inline void wrl(struct mv643xx_eth_private *mp, int offset, u32 data)
- {
--	writel(data, mp->shared->eth_base + offset);
-+	writel(data, mp->shared->base + offset);
- }
- 
--/*
-- * Changes MTU (maximum transfer unit) of the gigabit ethenret port
-- *
-- * Input :	pointer to ethernet interface network device structure
-- *		new mtu size
-- * Output :	0 upon success, -EINVAL upon failure
-- */
--static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
--{
--	if ((new_mtu > 9500) || (new_mtu < 64))
--		return -EINVAL;
--
--	dev->mtu = new_mtu;
--	if (!netif_running(dev))
--		return 0;
--
--	/*
--	 * Stop and then re-open the interface. This will allocate RX
--	 * skbs of the new MTU.
--	 * There is a possible danger that the open will not succeed,
--	 * due to memory being full, which might fail the open function.
--	 */
--	mv643xx_eth_stop(dev);
--	if (mv643xx_eth_open(dev)) {
--		printk(KERN_ERR "%s: Fatal error on opening device\n",
--			dev->name);
--	}
--
--	return 0;
--}
- 
--/*
-- * mv643xx_eth_rx_refill_descs
-- *
-- * Fills / refills RX queue on a certain gigabit ethernet port
-- *
-- * Input :	pointer to ethernet interface network device structure
-- * Output :	N/A
-- */
--static void mv643xx_eth_rx_refill_descs(struct net_device *dev)
-+/* rxq/txq helper functions *************************************************/
-+static struct mv643xx_eth_private *rxq_to_mp(struct rx_queue *rxq)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--	struct pkt_info pkt_info;
--	struct sk_buff *skb;
--	int unaligned;
--
--	while (mp->rx_desc_count < mp->rx_ring_size) {
--		skb = dev_alloc_skb(ETH_RX_SKB_SIZE + dma_get_cache_alignment());
--		if (!skb)
--			break;
--		mp->rx_desc_count++;
--		unaligned = (u32)skb->data & (dma_get_cache_alignment() - 1);
--		if (unaligned)
--			skb_reserve(skb, dma_get_cache_alignment() - unaligned);
--		pkt_info.cmd_sts = ETH_RX_ENABLE_INTERRUPT;
--		pkt_info.byte_cnt = ETH_RX_SKB_SIZE;
--		pkt_info.buf_ptr = dma_map_single(NULL, skb->data,
--					ETH_RX_SKB_SIZE, DMA_FROM_DEVICE);
--		pkt_info.return_info = skb;
--		if (eth_rx_return_buff(mp, &pkt_info) != ETH_OK) {
--			printk(KERN_ERR
--				"%s: Error allocating RX Ring\n", dev->name);
--			break;
--		}
--		skb_reserve(skb, ETH_HW_IP_ALIGN);
--	}
--	/*
--	 * If RX ring is empty of SKB, set a timer to try allocating
--	 * again at a later time.
--	 */
--	if (mp->rx_desc_count == 0) {
--		printk(KERN_INFO "%s: Rx ring is empty\n", dev->name);
--		mp->timeout.expires = jiffies + (HZ / 10);	/* 100 mSec */
--		add_timer(&mp->timeout);
--	}
-+	return container_of(rxq, struct mv643xx_eth_private, rxq[rxq->index]);
- }
- 
--/*
-- * mv643xx_eth_rx_refill_descs_timer_wrapper
-- *
-- * Timer routine to wake up RX queue filling task. This function is
-- * used only in case the RX queue is empty, and all alloc_skb has
-- * failed (due to out of memory event).
-- *
-- * Input :	pointer to ethernet interface network device structure
-- * Output :	N/A
-- */
--static inline void mv643xx_eth_rx_refill_descs_timer_wrapper(unsigned long data)
-+static struct mv643xx_eth_private *txq_to_mp(struct tx_queue *txq)
- {
--	mv643xx_eth_rx_refill_descs((struct net_device *)data);
-+	return container_of(txq, struct mv643xx_eth_private, txq[txq->index]);
- }
- 
--/*
-- * mv643xx_eth_update_mac_address
-- *
-- * Update the MAC address of the port in the address table
-- *
-- * Input :	pointer to ethernet interface network device structure
-- * Output :	N/A
-- */
--static void mv643xx_eth_update_mac_address(struct net_device *dev)
-+static void rxq_enable(struct rx_queue *rxq)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--
--	eth_port_init_mac_tables(mp);
--	eth_port_uc_addr_set(mp, dev->dev_addr);
-+	struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
-+	wrl(mp, RXQ_COMMAND(mp->port_num), 1 << rxq->index);
- }
- 
--/*
-- * mv643xx_eth_set_rx_mode
-- *
-- * Change from promiscuos to regular rx mode
-- *
-- * Input :	pointer to ethernet interface network device structure
-- * Output :	N/A
-- */
--static void mv643xx_eth_set_rx_mode(struct net_device *dev)
-+static void rxq_disable(struct rx_queue *rxq)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--	u32 config_reg;
--
--	config_reg = rdl(mp, PORT_CONFIG_REG(mp->port_num));
--	if (dev->flags & IFF_PROMISC)
--		config_reg |= (u32) UNICAST_PROMISCUOUS_MODE;
--	else
--		config_reg &= ~(u32) UNICAST_PROMISCUOUS_MODE;
--	wrl(mp, PORT_CONFIG_REG(mp->port_num), config_reg);
-+	struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
-+	u8 mask = 1 << rxq->index;
- 
--	eth_port_set_multicast_list(dev);
-+	wrl(mp, RXQ_COMMAND(mp->port_num), mask << 8);
-+	while (rdl(mp, RXQ_COMMAND(mp->port_num)) & mask)
-+		udelay(10);
- }
- 
--/*
-- * mv643xx_eth_set_mac_address
-- *
-- * Change the interface's mac address.
-- * No special hardware thing should be done because interface is always
-- * put in promiscuous mode.
-- *
-- * Input :	pointer to ethernet interface network device structure and
-- *		a pointer to the designated entry to be added to the cache.
-- * Output :	zero upon success, negative upon failure
-- */
--static int mv643xx_eth_set_mac_address(struct net_device *dev, void *addr)
-+static void txq_enable(struct tx_queue *txq)
- {
--	int i;
--
--	for (i = 0; i < 6; i++)
--		/* +2 is for the offset of the HW addr type */
--		dev->dev_addr[i] = ((unsigned char *)addr)[i + 2];
--	mv643xx_eth_update_mac_address(dev);
--	return 0;
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
-+	wrl(mp, TXQ_COMMAND(mp->port_num), 1 << txq->index);
- }
- 
--/*
-- * mv643xx_eth_tx_timeout
-- *
-- * Called upon a timeout on transmitting a packet
-- *
-- * Input :	pointer to ethernet interface network device structure.
-- * Output :	N/A
-- */
--static void mv643xx_eth_tx_timeout(struct net_device *dev)
-+static void txq_disable(struct tx_queue *txq)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--
--	printk(KERN_INFO "%s: TX timeout  ", dev->name);
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
-+	u8 mask = 1 << txq->index;
- 
--	/* Do the reset outside of interrupt context */
--	schedule_work(&mp->tx_timeout_task);
-+	wrl(mp, TXQ_COMMAND(mp->port_num), mask << 8);
-+	while (rdl(mp, TXQ_COMMAND(mp->port_num)) & mask)
-+		udelay(10);
- }
- 
--/*
-- * mv643xx_eth_tx_timeout_task
-- *
-- * Actual routine to reset the adapter when a timeout on Tx has occurred
-- */
--static void mv643xx_eth_tx_timeout_task(struct work_struct *ugly)
-+static void __txq_maybe_wake(struct tx_queue *txq)
- {
--	struct mv643xx_private *mp = container_of(ugly, struct mv643xx_private,
--						  tx_timeout_task);
--	struct net_device *dev = mp->dev;
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
- 
--	if (!netif_running(dev))
--		return;
-+	/*
-+	 * netif_{stop,wake}_queue() flow control only applies to
-+	 * the primary queue.
-+	 */
-+	BUG_ON(txq->index != mp->txq_primary);
- 
--	netif_stop_queue(dev);
-+	if (txq->tx_ring_size - txq->tx_desc_count >= MAX_DESCS_PER_SKB)
-+		netif_wake_queue(mp->dev);
-+}
- 
--	eth_port_reset(mp);
--	eth_port_start(dev);
- 
--	if (mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
--		netif_wake_queue(dev);
--}
-+/* rx ***********************************************************************/
-+static void txq_reclaim(struct tx_queue *txq, int force);
- 
--/**
-- * mv643xx_eth_free_tx_descs - Free the tx desc data for completed descriptors
-- *
-- * If force is non-zero, frees uncompleted descriptors as well
-- */
--static int mv643xx_eth_free_tx_descs(struct net_device *dev, int force)
-+static void rxq_refill(struct rx_queue *rxq)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--	struct eth_tx_desc *desc;
--	u32 cmd_sts;
--	struct sk_buff *skb;
-+	struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
- 	unsigned long flags;
--	int tx_index;
--	dma_addr_t addr;
--	int count;
--	int released = 0;
--
--	while (mp->tx_desc_count > 0) {
--		spin_lock_irqsave(&mp->lock, flags);
--
--		/* tx_desc_count might have changed before acquiring the lock */
--		if (mp->tx_desc_count <= 0) {
--			spin_unlock_irqrestore(&mp->lock, flags);
--			return released;
--		}
--
--		tx_index = mp->tx_used_desc_q;
--		desc = &mp->p_tx_desc_area[tx_index];
--		cmd_sts = desc->cmd_sts;
- 
--		if (!force && (cmd_sts & ETH_BUFFER_OWNED_BY_DMA)) {
--			spin_unlock_irqrestore(&mp->lock, flags);
--			return released;
--		}
-+	spin_lock_irqsave(&mp->lock, flags);
- 
--		mp->tx_used_desc_q = (tx_index + 1) % mp->tx_ring_size;
--		mp->tx_desc_count--;
-+	while (rxq->rx_desc_count < rxq->rx_ring_size) {
-+		int skb_size;
-+		struct sk_buff *skb;
-+		int unaligned;
-+		int rx;
- 
--		addr = desc->buf_ptr;
--		count = desc->byte_cnt;
--		skb = mp->tx_skb[tx_index];
--		if (skb)
--			mp->tx_skb[tx_index] = NULL;
-+		/*
-+		 * Reserve 2+14 bytes for an ethernet header (the
-+		 * hardware automatically prepends 2 bytes of dummy
-+		 * data to each received packet), 4 bytes for a VLAN
-+		 * header, and 4 bytes for the trailing FCS -- 24
-+		 * bytes total.
-+		 */
-+		skb_size = mp->dev->mtu + 24;
- 
--		if (cmd_sts & ETH_ERROR_SUMMARY) {
--			printk("%s: Error in TX\n", dev->name);
--			dev->stats.tx_errors++;
--		}
-+		skb = dev_alloc_skb(skb_size + dma_get_cache_alignment() - 1);
-+		if (skb == NULL)
-+			break;
- 
--		spin_unlock_irqrestore(&mp->lock, flags);
-+		unaligned = (u32)skb->data & (dma_get_cache_alignment() - 1);
-+		if (unaligned)
-+			skb_reserve(skb, dma_get_cache_alignment() - unaligned);
- 
--		if (cmd_sts & ETH_TX_FIRST_DESC)
--			dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
--		else
--			dma_unmap_page(NULL, addr, count, DMA_TO_DEVICE);
-+		rxq->rx_desc_count++;
-+		rx = rxq->rx_used_desc;
-+		rxq->rx_used_desc = (rx + 1) % rxq->rx_ring_size;
-+
-+		rxq->rx_desc_area[rx].buf_ptr = dma_map_single(NULL, skb->data,
-+						skb_size, DMA_FROM_DEVICE);
-+		rxq->rx_desc_area[rx].buf_size = skb_size;
-+		rxq->rx_skb[rx] = skb;
-+		wmb();
-+		rxq->rx_desc_area[rx].cmd_sts = BUFFER_OWNED_BY_DMA |
-+						RX_ENABLE_INTERRUPT;
-+		wmb();
- 
--		if (skb)
--			dev_kfree_skb_irq(skb);
-+		/*
-+		 * The hardware automatically prepends 2 bytes of
-+		 * dummy data to each received packet, so that the
-+		 * IP header ends up 16-byte aligned.
-+		 */
-+		skb_reserve(skb, 2);
-+	}
- 
--		released = 1;
-+	if (rxq->rx_desc_count != rxq->rx_ring_size) {
-+		rxq->rx_oom.expires = jiffies + (HZ / 10);
-+		add_timer(&rxq->rx_oom);
- 	}
- 
--	return released;
-+	spin_unlock_irqrestore(&mp->lock, flags);
- }
- 
--static void mv643xx_eth_free_completed_tx_descs(struct net_device *dev)
-+static inline void rxq_refill_timer_wrapper(unsigned long data)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--
--	if (mv643xx_eth_free_tx_descs(dev, 0) &&
--	    mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
--		netif_wake_queue(dev);
-+	rxq_refill((struct rx_queue *)data);
- }
- 
--static void mv643xx_eth_free_all_tx_descs(struct net_device *dev)
-+static int rxq_process(struct rx_queue *rxq, int budget)
- {
--	mv643xx_eth_free_tx_descs(dev, 1);
--}
-+	struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
-+	struct net_device_stats *stats = &mp->dev->stats;
-+	int rx;
- 
--/*
-- * mv643xx_eth_receive
-- *
-- * This function is forward packets that are received from the port's
-- * queues toward kernel core or FastRoute them to another interface.
-- *
-- * Input :	dev - a pointer to the required interface
-- *		max - maximum number to receive (0 means unlimted)
-- *
-- * Output :	number of served packets
-- */
--static int mv643xx_eth_receive_queue(struct net_device *dev, int budget)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	struct net_device_stats *stats = &dev->stats;
--	unsigned int received_packets = 0;
--	struct sk_buff *skb;
--	struct pkt_info pkt_info;
--
--	while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) {
--		dma_unmap_single(NULL, pkt_info.buf_ptr, ETH_RX_SKB_SIZE,
--							DMA_FROM_DEVICE);
--		mp->rx_desc_count--;
--		received_packets++;
-+	rx = 0;
-+	while (rx < budget) {
-+		struct rx_desc *rx_desc;
-+		unsigned int cmd_sts;
-+		struct sk_buff *skb;
-+		unsigned long flags;
-+
-+		spin_lock_irqsave(&mp->lock, flags);
-+
-+		rx_desc = &rxq->rx_desc_area[rxq->rx_curr_desc];
-+
-+		cmd_sts = rx_desc->cmd_sts;
-+		if (cmd_sts & BUFFER_OWNED_BY_DMA) {
-+			spin_unlock_irqrestore(&mp->lock, flags);
-+			break;
-+		}
-+		rmb();
-+
-+		skb = rxq->rx_skb[rxq->rx_curr_desc];
-+		rxq->rx_skb[rxq->rx_curr_desc] = NULL;
-+
-+		rxq->rx_curr_desc = (rxq->rx_curr_desc + 1) % rxq->rx_ring_size;
-+
-+		spin_unlock_irqrestore(&mp->lock, flags);
-+
-+		dma_unmap_single(NULL, rx_desc->buf_ptr + 2,
-+				 mp->dev->mtu + 24, DMA_FROM_DEVICE);
-+		rxq->rx_desc_count--;
-+		rx++;
- 
- 		/*
- 		 * Update statistics.
--		 * Note byte count includes 4 byte CRC count
-+		 *
-+		 * Note that the descriptor byte count includes 2 dummy
-+		 * bytes automatically inserted by the hardware at the
-+		 * start of the packet (which we don't count), and a 4
-+		 * byte CRC at the end of the packet (which we do count).
- 		 */
- 		stats->rx_packets++;
--		stats->rx_bytes += pkt_info.byte_cnt;
--		skb = pkt_info.return_info;
-+		stats->rx_bytes += rx_desc->byte_cnt - 2;
-+
- 		/*
--		 * In case received a packet without first / last bits on OR
--		 * the error summary bit is on, the packets needs to be dropeed.
-+		 * In case we received a packet without first / last bits
-+		 * on, or the error summary bit is set, the packet needs
-+		 * to be dropped.
- 		 */
--		if (((pkt_info.cmd_sts
--				& (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
--					(ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
--				|| (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
-+		if (((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
-+					(RX_FIRST_DESC | RX_LAST_DESC))
-+				|| (cmd_sts & ERROR_SUMMARY)) {
- 			stats->rx_dropped++;
--			if ((pkt_info.cmd_sts & (ETH_RX_FIRST_DESC |
--							ETH_RX_LAST_DESC)) !=
--				(ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) {
-+
-+			if ((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
-+				(RX_FIRST_DESC | RX_LAST_DESC)) {
- 				if (net_ratelimit())
--					printk(KERN_ERR
--						"%s: Received packet spread "
--						"on multiple descriptors\n",
--						dev->name);
-+					dev_printk(KERN_ERR, &mp->dev->dev,
-+						   "received packet spanning "
-+						   "multiple descriptors\n");
- 			}
--			if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)
-+
-+			if (cmd_sts & ERROR_SUMMARY)
- 				stats->rx_errors++;
- 
- 			dev_kfree_skb_irq(skb);
-@@ -975,668 +576,120 @@ static int mv643xx_eth_receive_queue(str
- 			 * The -4 is for the CRC in the trailer of the
- 			 * received packet
- 			 */
--			skb_put(skb, pkt_info.byte_cnt - 4);
-+			skb_put(skb, rx_desc->byte_cnt - 2 - 4);
- 
--			if (pkt_info.cmd_sts & ETH_LAYER_4_CHECKSUM_OK) {
-+			if (cmd_sts & LAYER_4_CHECKSUM_OK) {
- 				skb->ip_summed = CHECKSUM_UNNECESSARY;
- 				skb->csum = htons(
--					(pkt_info.cmd_sts & 0x0007fff8) >> 3);
-+					(cmd_sts & 0x0007fff8) >> 3);
- 			}
--			skb->protocol = eth_type_trans(skb, dev);
--#ifdef MV643XX_NAPI
-+			skb->protocol = eth_type_trans(skb, mp->dev);
-+#ifdef MV643XX_ETH_NAPI
- 			netif_receive_skb(skb);
- #else
- 			netif_rx(skb);
- #endif
- 		}
--		dev->last_rx = jiffies;
-+
-+		mp->dev->last_rx = jiffies;
- 	}
--	mv643xx_eth_rx_refill_descs(dev);	/* Fill RX ring with skb's */
- 
--	return received_packets;
-+	rxq_refill(rxq);
-+
-+	return rx;
- }
- 
--/* Set the mv643xx port configuration register for the speed/duplex mode. */
--static void mv643xx_eth_update_pscr(struct net_device *dev,
--				    struct ethtool_cmd *ecmd)
-+#ifdef MV643XX_ETH_NAPI
-+static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--	int port_num = mp->port_num;
--	u32 o_pscr, n_pscr;
--	unsigned int queues;
-+	struct mv643xx_eth_private *mp;
-+	int rx;
-+	int i;
- 
--	o_pscr = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
--	n_pscr = o_pscr;
-+	mp = container_of(napi, struct mv643xx_eth_private, napi);
- 
--	/* clear speed, duplex and rx buffer size fields */
--	n_pscr &= ~(SET_MII_SPEED_TO_100  |
--		   SET_GMII_SPEED_TO_1000 |
--		   SET_FULL_DUPLEX_MODE   |
--		   MAX_RX_PACKET_MASK);
--
--	if (ecmd->duplex == DUPLEX_FULL)
--		n_pscr |= SET_FULL_DUPLEX_MODE;
--
--	if (ecmd->speed == SPEED_1000)
--		n_pscr |= SET_GMII_SPEED_TO_1000 |
--			  MAX_RX_PACKET_9700BYTE;
--	else {
--		if (ecmd->speed == SPEED_100)
--			n_pscr |= SET_MII_SPEED_TO_100;
--		n_pscr |= MAX_RX_PACKET_1522BYTE;
--	}
--
--	if (n_pscr != o_pscr) {
--		if ((o_pscr & SERIAL_PORT_ENABLE) == 0)
--			wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
--		else {
--			queues = mv643xx_eth_port_disable_tx(mp);
-+#ifdef MV643XX_ETH_TX_FAST_REFILL
-+	if (++mp->tx_clean_threshold > 5) {
-+		mp->tx_clean_threshold = 0;
-+		for (i = 0; i < 8; i++)
-+			if (mp->txq_mask & (1 << i))
-+				txq_reclaim(mp->txq + i, 0);
-+	}
-+#endif
- 
--			o_pscr &= ~SERIAL_PORT_ENABLE;
--			wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), o_pscr);
--			wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
--			wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
--			if (queues)
--				mv643xx_eth_port_enable_tx(mp, queues);
--		}
-+	rx = 0;
-+	for (i = 7; rx < budget && i >= 0; i--)
-+		if (mp->rxq_mask & (1 << i))
-+			rx += rxq_process(mp->rxq + i, budget - rx);
-+
-+	if (rx < budget) {
-+		netif_rx_complete(mp->dev, napi);
-+		wrl(mp, INT_CAUSE(mp->port_num), 0);
-+		wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
-+		wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
- 	}
-+
-+	return rx;
- }
-+#endif
- 
--/*
-- * mv643xx_eth_int_handler
-- *
-- * Main interrupt handler for the gigbit ethernet ports
-- *
-- * Input :	irq	- irq number (not used)
-- *		dev_id	- a pointer to the required interface's data structure
-- *		regs	- not used
-- * Output :	N/A
-- */
- 
--static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
-+/* tx ***********************************************************************/
-+static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
- {
--	struct net_device *dev = (struct net_device *)dev_id;
--	struct mv643xx_private *mp = netdev_priv(dev);
--	u32 eth_int_cause, eth_int_cause_ext = 0;
--	unsigned int port_num = mp->port_num;
--
--	/* Read interrupt cause registers */
--	eth_int_cause = rdl(mp, INTERRUPT_CAUSE_REG(port_num)) &
--						ETH_INT_UNMASK_ALL;
--	if (eth_int_cause & ETH_INT_CAUSE_EXT) {
--		eth_int_cause_ext = rdl(mp,
--			INTERRUPT_CAUSE_EXTEND_REG(port_num)) &
--						ETH_INT_UNMASK_ALL_EXT;
--		wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num),
--							~eth_int_cause_ext);
--	}
--
--	/* PHY status changed */
--	if (eth_int_cause_ext & (ETH_INT_CAUSE_PHY | ETH_INT_CAUSE_STATE)) {
--		struct ethtool_cmd cmd;
-+	int frag;
- 
--		if (mii_link_ok(&mp->mii)) {
--			mii_ethtool_gset(&mp->mii, &cmd);
--			mv643xx_eth_update_pscr(dev, &cmd);
--			mv643xx_eth_port_enable_tx(mp, ETH_TX_QUEUES_ENABLED);
--			if (!netif_carrier_ok(dev)) {
--				netif_carrier_on(dev);
--				if (mp->tx_ring_size - mp->tx_desc_count >=
--							MAX_DESCS_PER_SKB)
--					netif_wake_queue(dev);
--			}
--		} else if (netif_carrier_ok(dev)) {
--			netif_stop_queue(dev);
--			netif_carrier_off(dev);
--		}
-+	for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
-+		skb_frag_t *fragp = &skb_shinfo(skb)->frags[frag];
-+		if (fragp->size <= 8 && fragp->page_offset & 7)
-+			return 1;
- 	}
- 
--#ifdef MV643XX_NAPI
--	if (eth_int_cause & ETH_INT_CAUSE_RX) {
--		/* schedule the NAPI poll routine to maintain port */
--		wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
-+	return 0;
-+}
- 
--		/* wait for previous write to complete */
--		rdl(mp, INTERRUPT_MASK_REG(port_num));
-+static int txq_alloc_desc_index(struct tx_queue *txq)
-+{
-+	int tx_desc_curr;
- 
--		netif_rx_schedule(dev, &mp->napi);
--	}
--#else
--	if (eth_int_cause & ETH_INT_CAUSE_RX)
--		mv643xx_eth_receive_queue(dev, INT_MAX);
--#endif
--	if (eth_int_cause_ext & ETH_INT_CAUSE_TX)
--		mv643xx_eth_free_completed_tx_descs(dev);
-+	BUG_ON(txq->tx_desc_count >= txq->tx_ring_size);
- 
--	/*
--	 * If no real interrupt occured, exit.
--	 * This can happen when using gigE interrupt coalescing mechanism.
--	 */
--	if ((eth_int_cause == 0x0) && (eth_int_cause_ext == 0x0))
--		return IRQ_NONE;
-+	tx_desc_curr = txq->tx_curr_desc;
-+	txq->tx_curr_desc = (tx_desc_curr + 1) % txq->tx_ring_size;
- 
--	return IRQ_HANDLED;
--}
--
--#ifdef MV643XX_COAL
--
--/*
-- * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
-- *
-- * DESCRIPTION:
-- *	This routine sets the RX coalescing interrupt mechanism parameter.
-- *	This parameter is a timeout counter, that counts in 64 t_clk
-- *	chunks ; that when timeout event occurs a maskable interrupt
-- *	occurs.
-- *	The parameter is calculated using the tClk of the MV-643xx chip
-- *	, and the required delay of the interrupt in usec.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet port
-- *	unsigned int delay		Delay in usec
-- *
-- * OUTPUT:
-- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
-- *
-- * RETURN:
-- *	The interrupt coalescing value set in the gigE port.
-- *
-- */
--static unsigned int eth_port_set_rx_coal(struct mv643xx_private *mp,
--					unsigned int delay)
--{
--	unsigned int port_num = mp->port_num;
--	unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
--
--	/* Set RX Coalescing mechanism */
--	wrl(mp, SDMA_CONFIG_REG(port_num),
--		((coal & 0x3fff) << 8) |
--		(rdl(mp, SDMA_CONFIG_REG(port_num))
--			& 0xffc000ff));
--
--	return coal;
--}
--#endif
--
--/*
-- * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
-- *
-- * DESCRIPTION:
-- *	This routine sets the TX coalescing interrupt mechanism parameter.
-- *	This parameter is a timeout counter, that counts in 64 t_clk
-- *	chunks ; that when timeout event occurs a maskable interrupt
-- *	occurs.
-- *	The parameter is calculated using the t_cLK frequency of the
-- *	MV-643xx chip and the required delay in the interrupt in uSec
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet port
-- *	unsigned int delay		Delay in uSeconds
-- *
-- * OUTPUT:
-- *	Interrupt coalescing mechanism value is set in MV-643xx chip.
-- *
-- * RETURN:
-- *	The interrupt coalescing value set in the gigE port.
-- *
-- */
--static unsigned int eth_port_set_tx_coal(struct mv643xx_private *mp,
--					unsigned int delay)
--{
--	unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
--
--	/* Set TX Coalescing mechanism */
--	wrl(mp, TX_FIFO_URGENT_THRESHOLD_REG(mp->port_num), coal << 4);
--
--	return coal;
--}
--
--/*
-- * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
-- *
-- * DESCRIPTION:
-- *	This function prepares a Rx chained list of descriptors and packet
-- *	buffers in a form of a ring. The routine must be called after port
-- *	initialization routine and before port start routine.
-- *	The Ethernet SDMA engine uses CPU bus addresses to access the various
-- *	devices in the system (i.e. DRAM). This function uses the ethernet
-- *	struct 'virtual to physical' routine (set by the user) to set the ring
-- *	with physical addresses.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port Control srtuct.
-- *
-- * OUTPUT:
-- *	The routine updates the Ethernet port control struct with information
-- *	regarding the Rx descriptors and buffers.
-- *
-- * RETURN:
-- *	None.
-- */
--static void ether_init_rx_desc_ring(struct mv643xx_private *mp)
--{
--	volatile struct eth_rx_desc *p_rx_desc;
--	int rx_desc_num = mp->rx_ring_size;
--	int i;
--
--	/* initialize the next_desc_ptr links in the Rx descriptors ring */
--	p_rx_desc = (struct eth_rx_desc *)mp->p_rx_desc_area;
--	for (i = 0; i < rx_desc_num; i++) {
--		p_rx_desc[i].next_desc_ptr = mp->rx_desc_dma +
--			((i + 1) % rx_desc_num) * sizeof(struct eth_rx_desc);
--	}
--
--	/* Save Rx desc pointer to driver struct. */
--	mp->rx_curr_desc_q = 0;
--	mp->rx_used_desc_q = 0;
--
--	mp->rx_desc_area_size = rx_desc_num * sizeof(struct eth_rx_desc);
--}
--
--/*
-- * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
-- *
-- * DESCRIPTION:
-- *	This function prepares a Tx chained list of descriptors and packet
-- *	buffers in a form of a ring. The routine must be called after port
-- *	initialization routine and before port start routine.
-- *	The Ethernet SDMA engine uses CPU bus addresses to access the various
-- *	devices in the system (i.e. DRAM). This function uses the ethernet
-- *	struct 'virtual to physical' routine (set by the user) to set the ring
-- *	with physical addresses.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port Control srtuct.
-- *
-- * OUTPUT:
-- *	The routine updates the Ethernet port control struct with information
-- *	regarding the Tx descriptors and buffers.
-- *
-- * RETURN:
-- *	None.
-- */
--static void ether_init_tx_desc_ring(struct mv643xx_private *mp)
--{
--	int tx_desc_num = mp->tx_ring_size;
--	struct eth_tx_desc *p_tx_desc;
--	int i;
--
--	/* Initialize the next_desc_ptr links in the Tx descriptors ring */
--	p_tx_desc = (struct eth_tx_desc *)mp->p_tx_desc_area;
--	for (i = 0; i < tx_desc_num; i++) {
--		p_tx_desc[i].next_desc_ptr = mp->tx_desc_dma +
--			((i + 1) % tx_desc_num) * sizeof(struct eth_tx_desc);
--	}
--
--	mp->tx_curr_desc_q = 0;
--	mp->tx_used_desc_q = 0;
--
--	mp->tx_desc_area_size = tx_desc_num * sizeof(struct eth_tx_desc);
--}
--
--static int mv643xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	int err;
--
--	spin_lock_irq(&mp->lock);
--	err = mii_ethtool_sset(&mp->mii, cmd);
--	spin_unlock_irq(&mp->lock);
--
--	return err;
--}
--
--static int mv643xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	int err;
--
--	spin_lock_irq(&mp->lock);
--	err = mii_ethtool_gset(&mp->mii, cmd);
--	spin_unlock_irq(&mp->lock);
--
--	/* The PHY may support 1000baseT_Half, but the mv643xx does not */
--	cmd->supported &= ~SUPPORTED_1000baseT_Half;
--	cmd->advertising &= ~ADVERTISED_1000baseT_Half;
--
--	return err;
--}
--
--/*
-- * mv643xx_eth_open
-- *
-- * This function is called when openning the network device. The function
-- * should initialize all the hardware, initialize cyclic Rx/Tx
-- * descriptors chain and buffers and allocate an IRQ to the network
-- * device.
-- *
-- * Input :	a pointer to the network device structure
-- *
-- * Output :	zero of success , nonzero if fails.
-- */
--
--static int mv643xx_eth_open(struct net_device *dev)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	unsigned int port_num = mp->port_num;
--	unsigned int size;
--	int err;
--
--	/* Clear any pending ethernet port interrupts */
--	wrl(mp, INTERRUPT_CAUSE_REG(port_num), 0);
--	wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
--	/* wait for previous write to complete */
--	rdl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num));
--
--	err = request_irq(dev->irq, mv643xx_eth_int_handler,
--			IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
--	if (err) {
--		printk(KERN_ERR "%s: Can not assign IRQ\n", dev->name);
--		return -EAGAIN;
--	}
--
--	eth_port_init(mp);
--
--	memset(&mp->timeout, 0, sizeof(struct timer_list));
--	mp->timeout.function = mv643xx_eth_rx_refill_descs_timer_wrapper;
--	mp->timeout.data = (unsigned long)dev;
--
--	/* Allocate RX and TX skb rings */
--	mp->rx_skb = kmalloc(sizeof(*mp->rx_skb) * mp->rx_ring_size,
--								GFP_KERNEL);
--	if (!mp->rx_skb) {
--		printk(KERN_ERR "%s: Cannot allocate Rx skb ring\n", dev->name);
--		err = -ENOMEM;
--		goto out_free_irq;
--	}
--	mp->tx_skb = kmalloc(sizeof(*mp->tx_skb) * mp->tx_ring_size,
--								GFP_KERNEL);
--	if (!mp->tx_skb) {
--		printk(KERN_ERR "%s: Cannot allocate Tx skb ring\n", dev->name);
--		err = -ENOMEM;
--		goto out_free_rx_skb;
--	}
--
--	/* Allocate TX ring */
--	mp->tx_desc_count = 0;
--	size = mp->tx_ring_size * sizeof(struct eth_tx_desc);
--	mp->tx_desc_area_size = size;
--
--	if (mp->tx_sram_size) {
--		mp->p_tx_desc_area = ioremap(mp->tx_sram_addr,
--							mp->tx_sram_size);
--		mp->tx_desc_dma = mp->tx_sram_addr;
--	} else
--		mp->p_tx_desc_area = dma_alloc_coherent(NULL, size,
--							&mp->tx_desc_dma,
--							GFP_KERNEL);
--
--	if (!mp->p_tx_desc_area) {
--		printk(KERN_ERR "%s: Cannot allocate Tx Ring (size %d bytes)\n",
--							dev->name, size);
--		err = -ENOMEM;
--		goto out_free_tx_skb;
--	}
--	BUG_ON((u32) mp->p_tx_desc_area & 0xf);	/* check 16-byte alignment */
--	memset((void *)mp->p_tx_desc_area, 0, mp->tx_desc_area_size);
--
--	ether_init_tx_desc_ring(mp);
--
--	/* Allocate RX ring */
--	mp->rx_desc_count = 0;
--	size = mp->rx_ring_size * sizeof(struct eth_rx_desc);
--	mp->rx_desc_area_size = size;
--
--	if (mp->rx_sram_size) {
--		mp->p_rx_desc_area = ioremap(mp->rx_sram_addr,
--							mp->rx_sram_size);
--		mp->rx_desc_dma = mp->rx_sram_addr;
--	} else
--		mp->p_rx_desc_area = dma_alloc_coherent(NULL, size,
--							&mp->rx_desc_dma,
--							GFP_KERNEL);
--
--	if (!mp->p_rx_desc_area) {
--		printk(KERN_ERR "%s: Cannot allocate Rx ring (size %d bytes)\n",
--							dev->name, size);
--		printk(KERN_ERR "%s: Freeing previously allocated TX queues...",
--							dev->name);
--		if (mp->rx_sram_size)
--			iounmap(mp->p_tx_desc_area);
--		else
--			dma_free_coherent(NULL, mp->tx_desc_area_size,
--					mp->p_tx_desc_area, mp->tx_desc_dma);
--		err = -ENOMEM;
--		goto out_free_tx_skb;
--	}
--	memset((void *)mp->p_rx_desc_area, 0, size);
--
--	ether_init_rx_desc_ring(mp);
--
--	mv643xx_eth_rx_refill_descs(dev);	/* Fill RX ring with skb's */
--
--#ifdef MV643XX_NAPI
--	napi_enable(&mp->napi);
--#endif
--
--	eth_port_start(dev);
--
--	/* Interrupt Coalescing */
--
--#ifdef MV643XX_COAL
--	mp->rx_int_coal =
--		eth_port_set_rx_coal(mp, MV643XX_RX_COAL);
--#endif
--
--	mp->tx_int_coal =
--		eth_port_set_tx_coal(mp, MV643XX_TX_COAL);
--
--	/* Unmask phy and link status changes interrupts */
--	wrl(mp, INTERRUPT_EXTEND_MASK_REG(port_num), ETH_INT_UNMASK_ALL_EXT);
--
--	/* Unmask RX buffer and TX end interrupt */
--	wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
--
--	return 0;
--
--out_free_tx_skb:
--	kfree(mp->tx_skb);
--out_free_rx_skb:
--	kfree(mp->rx_skb);
--out_free_irq:
--	free_irq(dev->irq, dev);
--
--	return err;
--}
--
--static void mv643xx_eth_free_tx_rings(struct net_device *dev)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--
--	/* Stop Tx Queues */
--	mv643xx_eth_port_disable_tx(mp);
--
--	/* Free outstanding skb's on TX ring */
--	mv643xx_eth_free_all_tx_descs(dev);
--
--	BUG_ON(mp->tx_used_desc_q != mp->tx_curr_desc_q);
--
--	/* Free TX ring */
--	if (mp->tx_sram_size)
--		iounmap(mp->p_tx_desc_area);
--	else
--		dma_free_coherent(NULL, mp->tx_desc_area_size,
--				mp->p_tx_desc_area, mp->tx_desc_dma);
--}
--
--static void mv643xx_eth_free_rx_rings(struct net_device *dev)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	int curr;
--
--	/* Stop RX Queues */
--	mv643xx_eth_port_disable_rx(mp);
--
--	/* Free preallocated skb's on RX rings */
--	for (curr = 0; mp->rx_desc_count && curr < mp->rx_ring_size; curr++) {
--		if (mp->rx_skb[curr]) {
--			dev_kfree_skb(mp->rx_skb[curr]);
--			mp->rx_desc_count--;
--		}
--	}
--
--	if (mp->rx_desc_count)
--		printk(KERN_ERR
--			"%s: Error in freeing Rx Ring. %d skb's still"
--			" stuck in RX Ring - ignoring them\n", dev->name,
--			mp->rx_desc_count);
--	/* Free RX ring */
--	if (mp->rx_sram_size)
--		iounmap(mp->p_rx_desc_area);
--	else
--		dma_free_coherent(NULL, mp->rx_desc_area_size,
--				mp->p_rx_desc_area, mp->rx_desc_dma);
--}
--
--/*
-- * mv643xx_eth_stop
-- *
-- * This function is used when closing the network device.
-- * It updates the hardware,
-- * release all memory that holds buffers and descriptors and release the IRQ.
-- * Input :	a pointer to the device structure
-- * Output :	zero if success , nonzero if fails
-- */
--
--static int mv643xx_eth_stop(struct net_device *dev)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	unsigned int port_num = mp->port_num;
--
--	/* Mask all interrupts on ethernet port */
--	wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
--	/* wait for previous write to complete */
--	rdl(mp, INTERRUPT_MASK_REG(port_num));
--
--#ifdef MV643XX_NAPI
--	napi_disable(&mp->napi);
--#endif
--	netif_carrier_off(dev);
--	netif_stop_queue(dev);
--
--	eth_port_reset(mp);
--
--	mv643xx_eth_free_tx_rings(dev);
--	mv643xx_eth_free_rx_rings(dev);
--
--	free_irq(dev->irq, dev);
--
--	return 0;
--}
--
--#ifdef MV643XX_NAPI
--/*
-- * mv643xx_poll
-- *
-- * This function is used in case of NAPI
-- */
--static int mv643xx_poll(struct napi_struct *napi, int budget)
--{
--	struct mv643xx_private *mp = container_of(napi, struct mv643xx_private, napi);
--	struct net_device *dev = mp->dev;
--	unsigned int port_num = mp->port_num;
--	int work_done;
--
--#ifdef MV643XX_TX_FAST_REFILL
--	if (++mp->tx_clean_threshold > 5) {
--		mv643xx_eth_free_completed_tx_descs(dev);
--		mp->tx_clean_threshold = 0;
--	}
--#endif
--
--	work_done = 0;
--	if ((rdl(mp, RX_CURRENT_QUEUE_DESC_PTR_0(port_num)))
--	    != (u32) mp->rx_used_desc_q)
--		work_done = mv643xx_eth_receive_queue(dev, budget);
--
--	if (work_done < budget) {
--		netif_rx_complete(dev, napi);
--		wrl(mp, INTERRUPT_CAUSE_REG(port_num), 0);
--		wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
--		wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
--	}
--
--	return work_done;
--}
--#endif
--
--/**
-- * has_tiny_unaligned_frags - check if skb has any small, unaligned fragments
-- *
-- * Hardware can't handle unaligned fragments smaller than 9 bytes.
-- * This helper function detects that case.
-- */
--
--static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
--{
--	unsigned int frag;
--	skb_frag_t *fragp;
--
--	for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
--		fragp = &skb_shinfo(skb)->frags[frag];
--		if (fragp->size <= 8 && fragp->page_offset & 0x7)
--			return 1;
--	}
--	return 0;
--}
--
--/**
-- * eth_alloc_tx_desc_index - return the index of the next available tx desc
-- */
--static int eth_alloc_tx_desc_index(struct mv643xx_private *mp)
--{
--	int tx_desc_curr;
--
--	BUG_ON(mp->tx_desc_count >= mp->tx_ring_size);
--
--	tx_desc_curr = mp->tx_curr_desc_q;
--	mp->tx_curr_desc_q = (tx_desc_curr + 1) % mp->tx_ring_size;
--
--	BUG_ON(mp->tx_curr_desc_q == mp->tx_used_desc_q);
-+	BUG_ON(txq->tx_curr_desc == txq->tx_used_desc);
- 
- 	return tx_desc_curr;
- }
- 
--/**
-- * eth_tx_fill_frag_descs - fill tx hw descriptors for an skb's fragments.
-- *
-- * Ensure the data for each fragment to be transmitted is mapped properly,
-- * then fill in descriptors in the tx hw queue.
-- */
--static void eth_tx_fill_frag_descs(struct mv643xx_private *mp,
--				   struct sk_buff *skb)
-+static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
- {
-+	int nr_frags = skb_shinfo(skb)->nr_frags;
- 	int frag;
--	int tx_index;
--	struct eth_tx_desc *desc;
--
--	for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
--		skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
- 
--		tx_index = eth_alloc_tx_desc_index(mp);
--		desc = &mp->p_tx_desc_area[tx_index];
-+	for (frag = 0; frag < nr_frags; frag++) {
-+		skb_frag_t *this_frag;
-+		int tx_index;
-+		struct tx_desc *desc;
-+
-+		this_frag = &skb_shinfo(skb)->frags[frag];
-+		tx_index = txq_alloc_desc_index(txq);
-+		desc = &txq->tx_desc_area[tx_index];
- 
--		desc->cmd_sts = ETH_BUFFER_OWNED_BY_DMA;
--		/* Last Frag enables interrupt and frees the skb */
--		if (frag == (skb_shinfo(skb)->nr_frags - 1)) {
--			desc->cmd_sts |= ETH_ZERO_PADDING |
--					 ETH_TX_LAST_DESC |
--					 ETH_TX_ENABLE_INTERRUPT;
--			mp->tx_skb[tx_index] = skb;
--		} else
--			mp->tx_skb[tx_index] = NULL;
-+		/*
-+		 * The last fragment will generate an interrupt
-+		 * which will free the skb on TX completion.
-+		 */
-+		if (frag == nr_frags - 1) {
-+			desc->cmd_sts = BUFFER_OWNED_BY_DMA |
-+					ZERO_PADDING | TX_LAST_DESC |
-+					TX_ENABLE_INTERRUPT;
-+			txq->tx_skb[tx_index] = skb;
-+		} else {
-+			desc->cmd_sts = BUFFER_OWNED_BY_DMA;
-+			txq->tx_skb[tx_index] = NULL;
-+		}
- 
--		desc = &mp->p_tx_desc_area[tx_index];
- 		desc->l4i_chk = 0;
- 		desc->byte_cnt = this_frag->size;
- 		desc->buf_ptr = dma_map_page(NULL, this_frag->page,
-@@ -1651,37 +704,28 @@ static inline __be16 sum16_as_be(__sum16
- 	return (__force __be16)sum;
- }
- 
--/**
-- * eth_tx_submit_descs_for_skb - submit data from an skb to the tx hw
-- *
-- * Ensure the data for an skb to be transmitted is mapped properly,
-- * then fill in descriptors in the tx hw queue and start the hardware.
-- */
--static void eth_tx_submit_descs_for_skb(struct mv643xx_private *mp,
--					struct sk_buff *skb)
-+static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb)
- {
-+	int nr_frags = skb_shinfo(skb)->nr_frags;
- 	int tx_index;
--	struct eth_tx_desc *desc;
-+	struct tx_desc *desc;
- 	u32 cmd_sts;
- 	int length;
--	int nr_frags = skb_shinfo(skb)->nr_frags;
- 
--	cmd_sts = ETH_TX_FIRST_DESC | ETH_GEN_CRC | ETH_BUFFER_OWNED_BY_DMA;
-+	cmd_sts = TX_FIRST_DESC | GEN_CRC | BUFFER_OWNED_BY_DMA;
- 
--	tx_index = eth_alloc_tx_desc_index(mp);
--	desc = &mp->p_tx_desc_area[tx_index];
-+	tx_index = txq_alloc_desc_index(txq);
-+	desc = &txq->tx_desc_area[tx_index];
- 
- 	if (nr_frags) {
--		eth_tx_fill_frag_descs(mp, skb);
-+		txq_submit_frag_skb(txq, skb);
- 
- 		length = skb_headlen(skb);
--		mp->tx_skb[tx_index] = NULL;
-+		txq->tx_skb[tx_index] = NULL;
- 	} else {
--		cmd_sts |= ETH_ZERO_PADDING |
--			   ETH_TX_LAST_DESC |
--			   ETH_TX_ENABLE_INTERRUPT;
-+		cmd_sts |= ZERO_PADDING | TX_LAST_DESC | TX_ENABLE_INTERRUPT;
- 		length = skb->len;
--		mp->tx_skb[tx_index] = skb;
-+		txq->tx_skb[tx_index] = skb;
- 	}
- 
- 	desc->byte_cnt = length;
-@@ -1690,13 +734,13 @@ static void eth_tx_submit_descs_for_skb(
- 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
- 		BUG_ON(skb->protocol != htons(ETH_P_IP));
- 
--		cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM |
--			   ETH_GEN_IP_V_4_CHECKSUM  |
--			   ip_hdr(skb)->ihl << ETH_TX_IHL_SHIFT;
-+		cmd_sts |= GEN_TCP_UDP_CHECKSUM |
-+			   GEN_IP_V4_CHECKSUM   |
-+			   ip_hdr(skb)->ihl << TX_IHL_SHIFT;
- 
- 		switch (ip_hdr(skb)->protocol) {
- 		case IPPROTO_UDP:
--			cmd_sts |= ETH_UDP_FRAME;
-+			cmd_sts |= UDP_FRAME;
- 			desc->l4i_chk = ntohs(sum16_as_be(udp_hdr(skb)->check));
- 			break;
- 		case IPPROTO_TCP:
-@@ -1707,7 +751,7 @@ static void eth_tx_submit_descs_for_skb(
- 		}
- 	} else {
- 		/* Errata BTS #50, IHL must be 5 if no HW checksum */
--		cmd_sts |= 5 << ETH_TX_IHL_SHIFT;
-+		cmd_sts |= 5 << TX_IHL_SHIFT;
- 		desc->l4i_chk = 0;
- 	}
- 
-@@ -1717,1649 +761,1818 @@ static void eth_tx_submit_descs_for_skb(
- 
- 	/* ensure all descriptors are written before poking hardware */
- 	wmb();
--	mv643xx_eth_port_enable_tx(mp, ETH_TX_QUEUES_ENABLED);
-+	txq_enable(txq);
- 
--	mp->tx_desc_count += nr_frags + 1;
-+	txq->tx_desc_count += nr_frags + 1;
- }
- 
--/**
-- * mv643xx_eth_start_xmit - queue an skb to the hardware for transmission
-- *
-- */
--static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+static int mv643xx_eth_xmit(struct sk_buff *skb, struct net_device *dev)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
- 	struct net_device_stats *stats = &dev->stats;
-+	struct tx_queue *txq;
- 	unsigned long flags;
- 
--	BUG_ON(netif_queue_stopped(dev));
--
- 	if (has_tiny_unaligned_frags(skb) && __skb_linearize(skb)) {
- 		stats->tx_dropped++;
--		printk(KERN_DEBUG "%s: failed to linearize tiny "
--				"unaligned fragment\n", dev->name);
-+		dev_printk(KERN_DEBUG, &dev->dev,
-+			   "failed to linearize skb with tiny "
-+			   "unaligned fragment\n");
- 		return NETDEV_TX_BUSY;
- 	}
- 
- 	spin_lock_irqsave(&mp->lock, flags);
- 
--	if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB) {
--		printk(KERN_ERR "%s: transmit with queue full\n", dev->name);
--		netif_stop_queue(dev);
-+	txq = mp->txq + mp->txq_primary;
-+
-+	if (txq->tx_ring_size - txq->tx_desc_count < MAX_DESCS_PER_SKB) {
- 		spin_unlock_irqrestore(&mp->lock, flags);
--		return NETDEV_TX_BUSY;
-+		if (txq->index == mp->txq_primary && net_ratelimit())
-+			dev_printk(KERN_ERR, &dev->dev,
-+				   "primary tx queue full?!\n");
-+		kfree_skb(skb);
-+		return NETDEV_TX_OK;
- 	}
- 
--	eth_tx_submit_descs_for_skb(mp, skb);
-+	txq_submit_skb(txq, skb);
- 	stats->tx_bytes += skb->len;
- 	stats->tx_packets++;
- 	dev->trans_start = jiffies;
- 
--	if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB)
--		netif_stop_queue(dev);
-+	if (txq->index == mp->txq_primary) {
-+		int entries_left;
-+
-+		entries_left = txq->tx_ring_size - txq->tx_desc_count;
-+		if (entries_left < MAX_DESCS_PER_SKB)
-+			netif_stop_queue(dev);
-+	}
- 
- 	spin_unlock_irqrestore(&mp->lock, flags);
- 
- 	return NETDEV_TX_OK;
- }
- 
--#ifdef CONFIG_NET_POLL_CONTROLLER
--static void mv643xx_netpoll(struct net_device *netdev)
-+
-+/* tx rate control **********************************************************/
-+/*
-+ * Set total maximum TX rate (shared by all TX queues for this port)
-+ * to 'rate' bits per second, with a maximum burst of 'burst' bytes.
-+ */
-+static void tx_set_rate(struct mv643xx_eth_private *mp, int rate, int burst)
- {
--	struct mv643xx_private *mp = netdev_priv(netdev);
--	int port_num = mp->port_num;
-+	int token_rate;
-+	int mtu;
-+	int bucket_size;
-+
-+	token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
-+	if (token_rate > 1023)
-+		token_rate = 1023;
- 
--	wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
--	/* wait for previous write to complete */
--	rdl(mp, INTERRUPT_MASK_REG(port_num));
-+	mtu = (mp->dev->mtu + 255) >> 8;
-+	if (mtu > 63)
-+		mtu = 63;
- 
--	mv643xx_eth_int_handler(netdev->irq, netdev);
-+	bucket_size = (burst + 255) >> 8;
-+	if (bucket_size > 65535)
-+		bucket_size = 65535;
- 
--	wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
-+	if (mp->shared->tx_bw_control_moved) {
-+		wrl(mp, TX_BW_RATE_MOVED(mp->port_num), token_rate);
-+		wrl(mp, TX_BW_MTU_MOVED(mp->port_num), mtu);
-+		wrl(mp, TX_BW_BURST_MOVED(mp->port_num), bucket_size);
-+	} else {
-+		wrl(mp, TX_BW_RATE(mp->port_num), token_rate);
-+		wrl(mp, TX_BW_MTU(mp->port_num), mtu);
-+		wrl(mp, TX_BW_BURST(mp->port_num), bucket_size);
-+	}
- }
--#endif
- 
--static void mv643xx_init_ethtool_cmd(struct net_device *dev, int phy_address,
--				     int speed, int duplex,
--				     struct ethtool_cmd *cmd)
-+static void txq_set_rate(struct tx_queue *txq, int rate, int burst)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
-+	int token_rate;
-+	int bucket_size;
- 
--	memset(cmd, 0, sizeof(*cmd));
-+	token_rate = ((rate / 1000) * 64) / (mp->shared->t_clk / 1000);
-+	if (token_rate > 1023)
-+		token_rate = 1023;
- 
--	cmd->port = PORT_MII;
--	cmd->transceiver = XCVR_INTERNAL;
--	cmd->phy_address = phy_address;
-+	bucket_size = (burst + 255) >> 8;
-+	if (bucket_size > 65535)
-+		bucket_size = 65535;
- 
--	if (speed == 0) {
--		cmd->autoneg = AUTONEG_ENABLE;
--		/* mii lib checks, but doesn't use speed on AUTONEG_ENABLE */
--		cmd->speed = SPEED_100;
--		cmd->advertising = ADVERTISED_10baseT_Half  |
--				   ADVERTISED_10baseT_Full  |
--				   ADVERTISED_100baseT_Half |
--				   ADVERTISED_100baseT_Full;
--		if (mp->mii.supports_gmii)
--			cmd->advertising |= ADVERTISED_1000baseT_Full;
--	} else {
--		cmd->autoneg = AUTONEG_DISABLE;
--		cmd->speed = speed;
--		cmd->duplex = duplex;
--	}
-+	wrl(mp, TXQ_BW_TOKENS(mp->port_num, txq->index), token_rate << 14);
-+	wrl(mp, TXQ_BW_CONF(mp->port_num, txq->index),
-+			(bucket_size << 10) | token_rate);
- }
- 
--/*/
-- * mv643xx_eth_probe
-- *
-- * First function called after registering the network device.
-- * It's purpose is to initialize the device as an ethernet device,
-- * fill the ethernet device structure with pointers * to functions,
-- * and set the MAC address of the interface
-- *
-- * Input :	struct device *
-- * Output :	-ENOMEM if failed , 0 if success
-- */
--static int mv643xx_eth_probe(struct platform_device *pdev)
-+static void txq_set_fixed_prio_mode(struct tx_queue *txq)
- {
--	struct mv643xx_eth_platform_data *pd;
--	int port_num;
--	struct mv643xx_private *mp;
--	struct net_device *dev;
--	u8 *p;
--	struct resource *res;
--	int err;
--	struct ethtool_cmd cmd;
--	int duplex = DUPLEX_HALF;
--	int speed = 0;			/* default to auto-negotiation */
--	DECLARE_MAC_BUF(mac);
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
-+	int off;
-+	u32 val;
- 
--	pd = pdev->dev.platform_data;
--	if (pd == NULL) {
--		printk(KERN_ERR "No mv643xx_eth_platform_data\n");
--		return -ENODEV;
--	}
-+	/*
-+	 * Turn on fixed priority mode.
-+	 */
-+	if (mp->shared->tx_bw_control_moved)
-+		off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
-+	else
-+		off = TXQ_FIX_PRIO_CONF(mp->port_num);
- 
--	if (pd->shared == NULL) {
--		printk(KERN_ERR "No mv643xx_eth_platform_data->shared\n");
--		return -ENODEV;
--	}
-+	val = rdl(mp, off);
-+	val |= 1 << txq->index;
-+	wrl(mp, off, val);
-+}
- 
--	dev = alloc_etherdev(sizeof(struct mv643xx_private));
--	if (!dev)
--		return -ENOMEM;
-+static void txq_set_wrr(struct tx_queue *txq, int weight)
-+{
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
-+	int off;
-+	u32 val;
- 
--	platform_set_drvdata(pdev, dev);
-+	/*
-+	 * Turn off fixed priority mode.
-+	 */
-+	if (mp->shared->tx_bw_control_moved)
-+		off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
-+	else
-+		off = TXQ_FIX_PRIO_CONF(mp->port_num);
- 
--	mp = netdev_priv(dev);
--	mp->dev = dev;
--#ifdef MV643XX_NAPI
--	netif_napi_add(dev, &mp->napi, mv643xx_poll, 64);
--#endif
-+	val = rdl(mp, off);
-+	val &= ~(1 << txq->index);
-+	wrl(mp, off, val);
- 
--	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
--	BUG_ON(!res);
--	dev->irq = res->start;
-+	/*
-+	 * Configure WRR weight for this queue.
-+	 */
-+	off = TXQ_BW_WRR_CONF(mp->port_num, txq->index);
- 
--	dev->open = mv643xx_eth_open;
--	dev->stop = mv643xx_eth_stop;
--	dev->hard_start_xmit = mv643xx_eth_start_xmit;
--	dev->set_mac_address = mv643xx_eth_set_mac_address;
--	dev->set_multicast_list = mv643xx_eth_set_rx_mode;
-+	val = rdl(mp, off);
-+	val = (val & ~0xff) | (weight & 0xff);
-+	wrl(mp, off, val);
-+}
- 
--	/* No need to Tx Timeout */
--	dev->tx_timeout = mv643xx_eth_tx_timeout;
- 
--#ifdef CONFIG_NET_POLL_CONTROLLER
--	dev->poll_controller = mv643xx_netpoll;
--#endif
-+/* mii management interface *************************************************/
-+#define SMI_BUSY		0x10000000
-+#define SMI_READ_VALID		0x08000000
-+#define SMI_OPCODE_READ		0x04000000
-+#define SMI_OPCODE_WRITE	0x00000000
- 
--	dev->watchdog_timeo = 2 * HZ;
--	dev->base_addr = 0;
--	dev->change_mtu = mv643xx_eth_change_mtu;
--	dev->do_ioctl = mv643xx_eth_do_ioctl;
--	SET_ETHTOOL_OPS(dev, &mv643xx_ethtool_ops);
-+static void smi_reg_read(struct mv643xx_eth_private *mp, unsigned int addr,
-+			 unsigned int reg, unsigned int *value)
-+{
-+	void __iomem *smi_reg = mp->shared_smi->base + SMI_REG;
-+	unsigned long flags;
-+	int i;
-+
-+	/* the SMI register is a shared resource */
-+	spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
-+
-+	/* wait for the SMI register to become available */
-+	for (i = 0; readl(smi_reg) & SMI_BUSY; i++) {
-+		if (i == 1000) {
-+			printk("%s: PHY busy timeout\n", mp->dev->name);
-+			goto out;
-+		}
-+		udelay(10);
-+	}
-+
-+	writel(SMI_OPCODE_READ | (reg << 21) | (addr << 16), smi_reg);
-+
-+	/* now wait for the data to be valid */
-+	for (i = 0; !(readl(smi_reg) & SMI_READ_VALID); i++) {
-+		if (i == 1000) {
-+			printk("%s: PHY read timeout\n", mp->dev->name);
-+			goto out;
-+		}
-+		udelay(10);
-+	}
-+
-+	*value = readl(smi_reg) & 0xffff;
-+out:
-+	spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
-+}
-+
-+static void smi_reg_write(struct mv643xx_eth_private *mp,
-+			  unsigned int addr,
-+			  unsigned int reg, unsigned int value)
-+{
-+	void __iomem *smi_reg = mp->shared_smi->base + SMI_REG;
-+	unsigned long flags;
-+	int i;
-+
-+	/* the SMI register is a shared resource */
-+	spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
-+
-+	/* wait for the SMI register to become available */
-+	for (i = 0; readl(smi_reg) & SMI_BUSY; i++) {
-+		if (i == 1000) {
-+			printk("%s: PHY busy timeout\n", mp->dev->name);
-+			goto out;
-+		}
-+		udelay(10);
-+	}
-+
-+	writel(SMI_OPCODE_WRITE | (reg << 21) |
-+		(addr << 16) | (value & 0xffff), smi_reg);
-+out:
-+	spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
-+}
-+
-+
-+/* mib counters *************************************************************/
-+static inline u32 mib_read(struct mv643xx_eth_private *mp, int offset)
-+{
-+	return rdl(mp, MIB_COUNTERS(mp->port_num) + offset);
-+}
-+
-+static void mib_counters_clear(struct mv643xx_eth_private *mp)
-+{
-+	int i;
-+
-+	for (i = 0; i < 0x80; i += 4)
-+		mib_read(mp, i);
-+}
-+
-+static void mib_counters_update(struct mv643xx_eth_private *mp)
-+{
-+	struct mib_counters *p = &mp->mib_counters;
-+
-+	p->good_octets_received += mib_read(mp, 0x00);
-+	p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
-+	p->bad_octets_received += mib_read(mp, 0x08);
-+	p->internal_mac_transmit_err += mib_read(mp, 0x0c);
-+	p->good_frames_received += mib_read(mp, 0x10);
-+	p->bad_frames_received += mib_read(mp, 0x14);
-+	p->broadcast_frames_received += mib_read(mp, 0x18);
-+	p->multicast_frames_received += mib_read(mp, 0x1c);
-+	p->frames_64_octets += mib_read(mp, 0x20);
-+	p->frames_65_to_127_octets += mib_read(mp, 0x24);
-+	p->frames_128_to_255_octets += mib_read(mp, 0x28);
-+	p->frames_256_to_511_octets += mib_read(mp, 0x2c);
-+	p->frames_512_to_1023_octets += mib_read(mp, 0x30);
-+	p->frames_1024_to_max_octets += mib_read(mp, 0x34);
-+	p->good_octets_sent += mib_read(mp, 0x38);
-+	p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32;
-+	p->good_frames_sent += mib_read(mp, 0x40);
-+	p->excessive_collision += mib_read(mp, 0x44);
-+	p->multicast_frames_sent += mib_read(mp, 0x48);
-+	p->broadcast_frames_sent += mib_read(mp, 0x4c);
-+	p->unrec_mac_control_received += mib_read(mp, 0x50);
-+	p->fc_sent += mib_read(mp, 0x54);
-+	p->good_fc_received += mib_read(mp, 0x58);
-+	p->bad_fc_received += mib_read(mp, 0x5c);
-+	p->undersize_received += mib_read(mp, 0x60);
-+	p->fragments_received += mib_read(mp, 0x64);
-+	p->oversize_received += mib_read(mp, 0x68);
-+	p->jabber_received += mib_read(mp, 0x6c);
-+	p->mac_receive_error += mib_read(mp, 0x70);
-+	p->bad_crc_event += mib_read(mp, 0x74);
-+	p->collision += mib_read(mp, 0x78);
-+	p->late_collision += mib_read(mp, 0x7c);
-+}
-+
-+
-+/* ethtool ******************************************************************/
-+struct mv643xx_eth_stats {
-+	char stat_string[ETH_GSTRING_LEN];
-+	int sizeof_stat;
-+	int netdev_off;
-+	int mp_off;
-+};
-+
-+#define SSTAT(m)						\
-+	{ #m, FIELD_SIZEOF(struct net_device_stats, m),		\
-+	  offsetof(struct net_device, stats.m), -1 }
-+
-+#define MIBSTAT(m)						\
-+	{ #m, FIELD_SIZEOF(struct mib_counters, m),		\
-+	  -1, offsetof(struct mv643xx_eth_private, mib_counters.m) }
-+
-+static const struct mv643xx_eth_stats mv643xx_eth_stats[] = {
-+	SSTAT(rx_packets),
-+	SSTAT(tx_packets),
-+	SSTAT(rx_bytes),
-+	SSTAT(tx_bytes),
-+	SSTAT(rx_errors),
-+	SSTAT(tx_errors),
-+	SSTAT(rx_dropped),
-+	SSTAT(tx_dropped),
-+	MIBSTAT(good_octets_received),
-+	MIBSTAT(bad_octets_received),
-+	MIBSTAT(internal_mac_transmit_err),
-+	MIBSTAT(good_frames_received),
-+	MIBSTAT(bad_frames_received),
-+	MIBSTAT(broadcast_frames_received),
-+	MIBSTAT(multicast_frames_received),
-+	MIBSTAT(frames_64_octets),
-+	MIBSTAT(frames_65_to_127_octets),
-+	MIBSTAT(frames_128_to_255_octets),
-+	MIBSTAT(frames_256_to_511_octets),
-+	MIBSTAT(frames_512_to_1023_octets),
-+	MIBSTAT(frames_1024_to_max_octets),
-+	MIBSTAT(good_octets_sent),
-+	MIBSTAT(good_frames_sent),
-+	MIBSTAT(excessive_collision),
-+	MIBSTAT(multicast_frames_sent),
-+	MIBSTAT(broadcast_frames_sent),
-+	MIBSTAT(unrec_mac_control_received),
-+	MIBSTAT(fc_sent),
-+	MIBSTAT(good_fc_received),
-+	MIBSTAT(bad_fc_received),
-+	MIBSTAT(undersize_received),
-+	MIBSTAT(fragments_received),
-+	MIBSTAT(oversize_received),
-+	MIBSTAT(jabber_received),
-+	MIBSTAT(mac_receive_error),
-+	MIBSTAT(bad_crc_event),
-+	MIBSTAT(collision),
-+	MIBSTAT(late_collision),
-+};
-+
-+static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	int err;
-+
-+	spin_lock_irq(&mp->lock);
-+	err = mii_ethtool_gset(&mp->mii, cmd);
-+	spin_unlock_irq(&mp->lock);
- 
--#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
--#ifdef MAX_SKB_FRAGS
- 	/*
--	 * Zero copy can only work if we use Discovery II memory. Else, we will
--	 * have to map the buffers to ISA memory which is only 16 MB
-+	 * The MAC does not support 1000baseT_Half.
- 	 */
--	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
--#endif
--#endif
-+	cmd->supported &= ~SUPPORTED_1000baseT_Half;
-+	cmd->advertising &= ~ADVERTISED_1000baseT_Half;
- 
--	/* Configure the timeout task */
--	INIT_WORK(&mp->tx_timeout_task, mv643xx_eth_tx_timeout_task);
-+	return err;
-+}
- 
--	spin_lock_init(&mp->lock);
-+static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	cmd->supported = SUPPORTED_MII;
-+	cmd->advertising = ADVERTISED_MII;
-+	cmd->speed = SPEED_1000;
-+	cmd->duplex = DUPLEX_FULL;
-+	cmd->port = PORT_MII;
-+	cmd->phy_address = 0;
-+	cmd->transceiver = XCVR_INTERNAL;
-+	cmd->autoneg = AUTONEG_DISABLE;
-+	cmd->maxtxpkt = 1;
-+	cmd->maxrxpkt = 1;
- 
--	mp->shared = platform_get_drvdata(pd->shared);
--	port_num = mp->port_num = pd->port_number;
-+	return 0;
-+}
- 
--	if (mp->shared->win_protect)
--		wrl(mp, WINDOW_PROTECT(port_num), mp->shared->win_protect);
-+static int mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	int err;
- 
--	mp->shared_smi = mp->shared;
--	if (pd->shared_smi != NULL)
--		mp->shared_smi = platform_get_drvdata(pd->shared_smi);
--
--	/* set default config values */
--	eth_port_uc_addr_get(mp, dev->dev_addr);
--	mp->rx_ring_size = PORT_DEFAULT_RECEIVE_QUEUE_SIZE;
--	mp->tx_ring_size = PORT_DEFAULT_TRANSMIT_QUEUE_SIZE;
-+	/*
-+	 * The MAC does not support 1000baseT_Half.
-+	 */
-+	cmd->advertising &= ~ADVERTISED_1000baseT_Half;
- 
--	if (is_valid_ether_addr(pd->mac_addr))
--		memcpy(dev->dev_addr, pd->mac_addr, 6);
-+	spin_lock_irq(&mp->lock);
-+	err = mii_ethtool_sset(&mp->mii, cmd);
-+	spin_unlock_irq(&mp->lock);
- 
--	if (pd->phy_addr || pd->force_phy_addr)
--		ethernet_phy_set(mp, pd->phy_addr);
-+	return err;
-+}
- 
--	if (pd->rx_queue_size)
--		mp->rx_ring_size = pd->rx_queue_size;
-+static int mv643xx_eth_set_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	return -EINVAL;
-+}
- 
--	if (pd->tx_queue_size)
--		mp->tx_ring_size = pd->tx_queue_size;
-+static void mv643xx_eth_get_drvinfo(struct net_device *dev,
-+				    struct ethtool_drvinfo *drvinfo)
-+{
-+	strncpy(drvinfo->driver,  mv643xx_eth_driver_name, 32);
-+	strncpy(drvinfo->version, mv643xx_eth_driver_version, 32);
-+	strncpy(drvinfo->fw_version, "N/A", 32);
-+	strncpy(drvinfo->bus_info, "platform", 32);
-+	drvinfo->n_stats = ARRAY_SIZE(mv643xx_eth_stats);
-+}
-+
-+static int mv643xx_eth_nway_reset(struct net_device *dev)
-+{
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
- 
--	if (pd->tx_sram_size) {
--		mp->tx_sram_size = pd->tx_sram_size;
--		mp->tx_sram_addr = pd->tx_sram_addr;
-+	return mii_nway_restart(&mp->mii);
-+}
-+
-+static int mv643xx_eth_nway_reset_phyless(struct net_device *dev)
-+{
-+	return -EINVAL;
-+}
-+
-+static u32 mv643xx_eth_get_link(struct net_device *dev)
-+{
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+
-+	return mii_link_ok(&mp->mii);
-+}
-+
-+static u32 mv643xx_eth_get_link_phyless(struct net_device *dev)
-+{
-+	return 1;
-+}
-+
-+static void mv643xx_eth_get_strings(struct net_device *dev,
-+				    uint32_t stringset, uint8_t *data)
-+{
-+	int i;
-+
-+	if (stringset == ETH_SS_STATS) {
-+		for (i = 0; i < ARRAY_SIZE(mv643xx_eth_stats); i++) {
-+			memcpy(data + i * ETH_GSTRING_LEN,
-+				mv643xx_eth_stats[i].stat_string,
-+				ETH_GSTRING_LEN);
-+		}
- 	}
-+}
-+
-+static void mv643xx_eth_get_ethtool_stats(struct net_device *dev,
-+					  struct ethtool_stats *stats,
-+					  uint64_t *data)
-+{
-+	struct mv643xx_eth_private *mp = dev->priv;
-+	int i;
-+
-+	mib_counters_update(mp);
-+
-+	for (i = 0; i < ARRAY_SIZE(mv643xx_eth_stats); i++) {
-+		const struct mv643xx_eth_stats *stat;
-+		void *p;
-+
-+		stat = mv643xx_eth_stats + i;
-+
-+		if (stat->netdev_off >= 0)
-+			p = ((void *)mp->dev) + stat->netdev_off;
-+		else
-+			p = ((void *)mp) + stat->mp_off;
- 
--	if (pd->rx_sram_size) {
--		mp->rx_sram_size = pd->rx_sram_size;
--		mp->rx_sram_addr = pd->rx_sram_addr;
-+		data[i] = (stat->sizeof_stat == 8) ?
-+				*(uint64_t *)p : *(uint32_t *)p;
- 	}
-+}
- 
--	duplex = pd->duplex;
--	speed = pd->speed;
-+static int mv643xx_eth_get_sset_count(struct net_device *dev, int sset)
-+{
-+	if (sset == ETH_SS_STATS)
-+		return ARRAY_SIZE(mv643xx_eth_stats);
- 
--	/* Hook up MII support for ethtool */
--	mp->mii.dev = dev;
--	mp->mii.mdio_read = mv643xx_mdio_read;
--	mp->mii.mdio_write = mv643xx_mdio_write;
--	mp->mii.phy_id = ethernet_phy_get(mp);
--	mp->mii.phy_id_mask = 0x3f;
--	mp->mii.reg_num_mask = 0x1f;
-+	return -EOPNOTSUPP;
-+}
- 
--	err = ethernet_phy_detect(mp);
--	if (err) {
--		pr_debug("%s: No PHY detected at addr %d\n",
--				dev->name, ethernet_phy_get(mp));
-+static const struct ethtool_ops mv643xx_eth_ethtool_ops = {
-+	.get_settings		= mv643xx_eth_get_settings,
-+	.set_settings		= mv643xx_eth_set_settings,
-+	.get_drvinfo		= mv643xx_eth_get_drvinfo,
-+	.nway_reset		= mv643xx_eth_nway_reset,
-+	.get_link		= mv643xx_eth_get_link,
-+	.set_sg			= ethtool_op_set_sg,
-+	.get_strings		= mv643xx_eth_get_strings,
-+	.get_ethtool_stats	= mv643xx_eth_get_ethtool_stats,
-+	.get_sset_count		= mv643xx_eth_get_sset_count,
-+};
-+
-+static const struct ethtool_ops mv643xx_eth_ethtool_ops_phyless = {
-+	.get_settings		= mv643xx_eth_get_settings_phyless,
-+	.set_settings		= mv643xx_eth_set_settings_phyless,
-+	.get_drvinfo		= mv643xx_eth_get_drvinfo,
-+	.nway_reset		= mv643xx_eth_nway_reset_phyless,
-+	.get_link		= mv643xx_eth_get_link_phyless,
-+	.set_sg			= ethtool_op_set_sg,
-+	.get_strings		= mv643xx_eth_get_strings,
-+	.get_ethtool_stats	= mv643xx_eth_get_ethtool_stats,
-+	.get_sset_count		= mv643xx_eth_get_sset_count,
-+};
-+
-+
-+/* address handling *********************************************************/
-+static void uc_addr_get(struct mv643xx_eth_private *mp, unsigned char *addr)
-+{
-+	unsigned int mac_h;
-+	unsigned int mac_l;
-+
-+	mac_h = rdl(mp, MAC_ADDR_HIGH(mp->port_num));
-+	mac_l = rdl(mp, MAC_ADDR_LOW(mp->port_num));
-+
-+	addr[0] = (mac_h >> 24) & 0xff;
-+	addr[1] = (mac_h >> 16) & 0xff;
-+	addr[2] = (mac_h >> 8) & 0xff;
-+	addr[3] = mac_h & 0xff;
-+	addr[4] = (mac_l >> 8) & 0xff;
-+	addr[5] = mac_l & 0xff;
-+}
-+
-+static void init_mac_tables(struct mv643xx_eth_private *mp)
-+{
-+	int i;
-+
-+	for (i = 0; i < 0x100; i += 4) {
-+		wrl(mp, SPECIAL_MCAST_TABLE(mp->port_num) + i, 0);
-+		wrl(mp, OTHER_MCAST_TABLE(mp->port_num) + i, 0);
-+	}
-+
-+	for (i = 0; i < 0x10; i += 4)
-+		wrl(mp, UNICAST_TABLE(mp->port_num) + i, 0);
-+}
-+
-+static void set_filter_table_entry(struct mv643xx_eth_private *mp,
-+				   int table, unsigned char entry)
-+{
-+	unsigned int table_reg;
-+
-+	/* Set "accepts frame bit" at specified table entry */
-+	table_reg = rdl(mp, table + (entry & 0xfc));
-+	table_reg |= 0x01 << (8 * (entry & 3));
-+	wrl(mp, table + (entry & 0xfc), table_reg);
-+}
-+
-+static void uc_addr_set(struct mv643xx_eth_private *mp, unsigned char *addr)
-+{
-+	unsigned int mac_h;
-+	unsigned int mac_l;
-+	int table;
-+
-+	mac_l = (addr[4] << 8) | addr[5];
-+	mac_h = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
-+
-+	wrl(mp, MAC_ADDR_LOW(mp->port_num), mac_l);
-+	wrl(mp, MAC_ADDR_HIGH(mp->port_num), mac_h);
-+
-+	table = UNICAST_TABLE(mp->port_num);
-+	set_filter_table_entry(mp, table, addr[5] & 0x0f);
-+}
-+
-+static int mv643xx_eth_set_mac_address(struct net_device *dev, void *addr)
-+{
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+
-+	/* +2 is for the offset of the HW addr type */
-+	memcpy(dev->dev_addr, addr + 2, 6);
-+
-+	init_mac_tables(mp);
-+	uc_addr_set(mp, dev->dev_addr);
-+
-+	return 0;
-+}
-+
-+static int addr_crc(unsigned char *addr)
-+{
-+	int crc = 0;
-+	int i;
-+
-+	for (i = 0; i < 6; i++) {
-+		int j;
-+
-+		crc = (crc ^ addr[i]) << 8;
-+		for (j = 7; j >= 0; j--) {
-+			if (crc & (0x100 << j))
-+				crc ^= 0x107 << j;
-+		}
-+	}
-+
-+	return crc;
-+}
-+
-+static void mv643xx_eth_set_rx_mode(struct net_device *dev)
-+{
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	u32 port_config;
-+	struct dev_addr_list *addr;
-+	int i;
-+
-+	port_config = rdl(mp, PORT_CONFIG(mp->port_num));
-+	if (dev->flags & IFF_PROMISC)
-+		port_config |= UNICAST_PROMISCUOUS_MODE;
-+	else
-+		port_config &= ~UNICAST_PROMISCUOUS_MODE;
-+	wrl(mp, PORT_CONFIG(mp->port_num), port_config);
-+
-+	if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) {
-+		int port_num = mp->port_num;
-+		u32 accept = 0x01010101;
-+
-+		for (i = 0; i < 0x100; i += 4) {
-+			wrl(mp, SPECIAL_MCAST_TABLE(port_num) + i, accept);
-+			wrl(mp, OTHER_MCAST_TABLE(port_num) + i, accept);
-+		}
-+		return;
-+	}
-+
-+	for (i = 0; i < 0x100; i += 4) {
-+		wrl(mp, SPECIAL_MCAST_TABLE(mp->port_num) + i, 0);
-+		wrl(mp, OTHER_MCAST_TABLE(mp->port_num) + i, 0);
-+	}
-+
-+	for (addr = dev->mc_list; addr != NULL; addr = addr->next) {
-+		u8 *a = addr->da_addr;
-+		int table;
-+
-+		if (addr->da_addrlen != 6)
-+			continue;
-+
-+		if (memcmp(a, "\x01\x00\x5e\x00\x00", 5) == 0) {
-+			table = SPECIAL_MCAST_TABLE(mp->port_num);
-+			set_filter_table_entry(mp, table, a[5]);
-+		} else {
-+			int crc = addr_crc(a);
-+
-+			table = OTHER_MCAST_TABLE(mp->port_num);
-+			set_filter_table_entry(mp, table, crc);
-+		}
-+	}
-+}
-+
-+
-+/* rx/tx queue initialisation ***********************************************/
-+static int rxq_init(struct mv643xx_eth_private *mp, int index)
-+{
-+	struct rx_queue *rxq = mp->rxq + index;
-+	struct rx_desc *rx_desc;
-+	int size;
-+	int i;
-+
-+	rxq->index = index;
-+
-+	rxq->rx_ring_size = mp->default_rx_ring_size;
-+
-+	rxq->rx_desc_count = 0;
-+	rxq->rx_curr_desc = 0;
-+	rxq->rx_used_desc = 0;
-+
-+	size = rxq->rx_ring_size * sizeof(struct rx_desc);
-+
-+	if (index == mp->rxq_primary && size <= mp->rx_desc_sram_size) {
-+		rxq->rx_desc_area = ioremap(mp->rx_desc_sram_addr,
-+						mp->rx_desc_sram_size);
-+		rxq->rx_desc_dma = mp->rx_desc_sram_addr;
-+	} else {
-+		rxq->rx_desc_area = dma_alloc_coherent(NULL, size,
-+							&rxq->rx_desc_dma,
-+							GFP_KERNEL);
-+	}
-+
-+	if (rxq->rx_desc_area == NULL) {
-+		dev_printk(KERN_ERR, &mp->dev->dev,
-+			   "can't allocate rx ring (%d bytes)\n", size);
- 		goto out;
- 	}
-+	memset(rxq->rx_desc_area, 0, size);
- 
--	ethernet_phy_reset(mp);
--	mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
--	mv643xx_init_ethtool_cmd(dev, mp->mii.phy_id, speed, duplex, &cmd);
--	mv643xx_eth_update_pscr(dev, &cmd);
--	mv643xx_set_settings(dev, &cmd);
-+	rxq->rx_desc_area_size = size;
-+	rxq->rx_skb = kmalloc(rxq->rx_ring_size * sizeof(*rxq->rx_skb),
-+								GFP_KERNEL);
-+	if (rxq->rx_skb == NULL) {
-+		dev_printk(KERN_ERR, &mp->dev->dev,
-+			   "can't allocate rx skb ring\n");
-+		goto out_free;
-+	}
- 
--	SET_NETDEV_DEV(dev, &pdev->dev);
--	err = register_netdev(dev);
--	if (err)
-+	rx_desc = (struct rx_desc *)rxq->rx_desc_area;
-+	for (i = 0; i < rxq->rx_ring_size; i++) {
-+		int nexti = (i + 1) % rxq->rx_ring_size;
-+		rx_desc[i].next_desc_ptr = rxq->rx_desc_dma +
-+					nexti * sizeof(struct rx_desc);
-+	}
-+
-+	init_timer(&rxq->rx_oom);
-+	rxq->rx_oom.data = (unsigned long)rxq;
-+	rxq->rx_oom.function = rxq_refill_timer_wrapper;
-+
-+	return 0;
-+
-+
-+out_free:
-+	if (index == mp->rxq_primary && size <= mp->rx_desc_sram_size)
-+		iounmap(rxq->rx_desc_area);
-+	else
-+		dma_free_coherent(NULL, size,
-+				  rxq->rx_desc_area,
-+				  rxq->rx_desc_dma);
-+
-+out:
-+	return -ENOMEM;
-+}
-+
-+static void rxq_deinit(struct rx_queue *rxq)
-+{
-+	struct mv643xx_eth_private *mp = rxq_to_mp(rxq);
-+	int i;
-+
-+	rxq_disable(rxq);
-+
-+	del_timer_sync(&rxq->rx_oom);
-+
-+	for (i = 0; i < rxq->rx_ring_size; i++) {
-+		if (rxq->rx_skb[i]) {
-+			dev_kfree_skb(rxq->rx_skb[i]);
-+			rxq->rx_desc_count--;
-+		}
-+	}
-+
-+	if (rxq->rx_desc_count) {
-+		dev_printk(KERN_ERR, &mp->dev->dev,
-+			   "error freeing rx ring -- %d skbs stuck\n",
-+			   rxq->rx_desc_count);
-+	}
-+
-+	if (rxq->index == mp->rxq_primary &&
-+	    rxq->rx_desc_area_size <= mp->rx_desc_sram_size)
-+		iounmap(rxq->rx_desc_area);
-+	else
-+		dma_free_coherent(NULL, rxq->rx_desc_area_size,
-+				  rxq->rx_desc_area, rxq->rx_desc_dma);
-+
-+	kfree(rxq->rx_skb);
-+}
-+
-+static int txq_init(struct mv643xx_eth_private *mp, int index)
-+{
-+	struct tx_queue *txq = mp->txq + index;
-+	struct tx_desc *tx_desc;
-+	int size;
-+	int i;
-+
-+	txq->index = index;
-+
-+	txq->tx_ring_size = mp->default_tx_ring_size;
-+
-+	txq->tx_desc_count = 0;
-+	txq->tx_curr_desc = 0;
-+	txq->tx_used_desc = 0;
-+
-+	size = txq->tx_ring_size * sizeof(struct tx_desc);
-+
-+	if (index == mp->txq_primary && size <= mp->tx_desc_sram_size) {
-+		txq->tx_desc_area = ioremap(mp->tx_desc_sram_addr,
-+						mp->tx_desc_sram_size);
-+		txq->tx_desc_dma = mp->tx_desc_sram_addr;
-+	} else {
-+		txq->tx_desc_area = dma_alloc_coherent(NULL, size,
-+							&txq->tx_desc_dma,
-+							GFP_KERNEL);
-+	}
-+
-+	if (txq->tx_desc_area == NULL) {
-+		dev_printk(KERN_ERR, &mp->dev->dev,
-+			   "can't allocate tx ring (%d bytes)\n", size);
- 		goto out;
-+	}
-+	memset(txq->tx_desc_area, 0, size);
- 
--	p = dev->dev_addr;
--	printk(KERN_NOTICE
--		"%s: port %d with MAC address %s\n",
--		dev->name, port_num, print_mac(mac, p));
-+	txq->tx_desc_area_size = size;
-+	txq->tx_skb = kmalloc(txq->tx_ring_size * sizeof(*txq->tx_skb),
-+								GFP_KERNEL);
-+	if (txq->tx_skb == NULL) {
-+		dev_printk(KERN_ERR, &mp->dev->dev,
-+			   "can't allocate tx skb ring\n");
-+		goto out_free;
-+	}
- 
--	if (dev->features & NETIF_F_SG)
--		printk(KERN_NOTICE "%s: Scatter Gather Enabled\n", dev->name);
-+	tx_desc = (struct tx_desc *)txq->tx_desc_area;
-+	for (i = 0; i < txq->tx_ring_size; i++) {
-+		int nexti = (i + 1) % txq->tx_ring_size;
-+		tx_desc[i].next_desc_ptr = txq->tx_desc_dma +
-+					nexti * sizeof(struct tx_desc);
-+	}
- 
--	if (dev->features & NETIF_F_IP_CSUM)
--		printk(KERN_NOTICE "%s: TX TCP/IP Checksumming Supported\n",
--								dev->name);
-+	return 0;
-+
-+
-+out_free:
-+	if (index == mp->txq_primary && size <= mp->tx_desc_sram_size)
-+		iounmap(txq->tx_desc_area);
-+	else
-+		dma_free_coherent(NULL, size,
-+				  txq->tx_desc_area,
-+				  txq->tx_desc_dma);
-+
-+out:
-+	return -ENOMEM;
-+}
-+
-+static void txq_reclaim(struct tx_queue *txq, int force)
-+{
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&mp->lock, flags);
-+	while (txq->tx_desc_count > 0) {
-+		int tx_index;
-+		struct tx_desc *desc;
-+		u32 cmd_sts;
-+		struct sk_buff *skb;
-+		dma_addr_t addr;
-+		int count;
-+
-+		tx_index = txq->tx_used_desc;
-+		desc = &txq->tx_desc_area[tx_index];
-+		cmd_sts = desc->cmd_sts;
-+
-+		if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA))
-+			break;
-+
-+		txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size;
-+		txq->tx_desc_count--;
-+
-+		addr = desc->buf_ptr;
-+		count = desc->byte_cnt;
-+		skb = txq->tx_skb[tx_index];
-+		txq->tx_skb[tx_index] = NULL;
-+
-+		if (cmd_sts & ERROR_SUMMARY) {
-+			dev_printk(KERN_INFO, &mp->dev->dev, "tx error\n");
-+			mp->dev->stats.tx_errors++;
-+		}
-+
-+		/*
-+		 * Drop mp->lock while we free the skb.
-+		 */
-+		spin_unlock_irqrestore(&mp->lock, flags);
- 
--#ifdef MV643XX_CHECKSUM_OFFLOAD_TX
--	printk(KERN_NOTICE "%s: RX TCP/UDP Checksum Offload ON \n", dev->name);
-+		if (cmd_sts & TX_FIRST_DESC)
-+			dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
-+		else
-+			dma_unmap_page(NULL, addr, count, DMA_TO_DEVICE);
-+
-+		if (skb)
-+			dev_kfree_skb_irq(skb);
-+
-+		spin_lock_irqsave(&mp->lock, flags);
-+	}
-+	spin_unlock_irqrestore(&mp->lock, flags);
-+}
-+
-+static void txq_deinit(struct tx_queue *txq)
-+{
-+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
-+
-+	txq_disable(txq);
-+	txq_reclaim(txq, 1);
-+
-+	BUG_ON(txq->tx_used_desc != txq->tx_curr_desc);
-+
-+	if (txq->index == mp->txq_primary &&
-+	    txq->tx_desc_area_size <= mp->tx_desc_sram_size)
-+		iounmap(txq->tx_desc_area);
-+	else
-+		dma_free_coherent(NULL, txq->tx_desc_area_size,
-+				  txq->tx_desc_area, txq->tx_desc_dma);
-+
-+	kfree(txq->tx_skb);
-+}
-+
-+
-+/* netdev ops and related ***************************************************/
-+static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex)
-+{
-+	u32 pscr_o;
-+	u32 pscr_n;
-+
-+	pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
-+
-+	/* clear speed, duplex and rx buffer size fields */
-+	pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100   |
-+			    SET_GMII_SPEED_TO_1000 |
-+			    SET_FULL_DUPLEX_MODE   |
-+			    MAX_RX_PACKET_MASK);
-+
-+	if (speed == SPEED_1000) {
-+		pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE;
-+	} else {
-+		if (speed == SPEED_100)
-+			pscr_n |= SET_MII_SPEED_TO_100;
-+		pscr_n |= MAX_RX_PACKET_1522BYTE;
-+	}
-+
-+	if (duplex == DUPLEX_FULL)
-+		pscr_n |= SET_FULL_DUPLEX_MODE;
-+
-+	if (pscr_n != pscr_o) {
-+		if ((pscr_o & SERIAL_PORT_ENABLE) == 0)
-+			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-+		else {
-+			int i;
-+
-+			for (i = 0; i < 8; i++)
-+				if (mp->txq_mask & (1 << i))
-+					txq_disable(mp->txq + i);
-+
-+			pscr_o &= ~SERIAL_PORT_ENABLE;
-+			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o);
-+			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-+			wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n);
-+
-+			for (i = 0; i < 8; i++)
-+				if (mp->txq_mask & (1 << i))
-+					txq_enable(mp->txq + i);
-+		}
-+	}
-+}
-+
-+static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
-+{
-+	struct net_device *dev = (struct net_device *)dev_id;
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	u32 int_cause;
-+	u32 int_cause_ext;
-+	u32 txq_active;
-+
-+	int_cause = rdl(mp, INT_CAUSE(mp->port_num)) &
-+			(INT_TX_END | INT_RX | INT_EXT);
-+	if (int_cause == 0)
-+		return IRQ_NONE;
-+
-+	int_cause_ext = 0;
-+	if (int_cause & INT_EXT) {
-+		int_cause_ext = rdl(mp, INT_CAUSE_EXT(mp->port_num))
-+				& (INT_EXT_LINK | INT_EXT_PHY | INT_EXT_TX);
-+		wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext);
-+	}
-+
-+	if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) {
-+		if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) {
-+			int i;
-+
-+			if (mp->phy_addr != -1) {
-+				struct ethtool_cmd cmd;
-+
-+				mii_ethtool_gset(&mp->mii, &cmd);
-+				update_pscr(mp, cmd.speed, cmd.duplex);
-+			}
-+
-+			for (i = 0; i < 8; i++)
-+				if (mp->txq_mask & (1 << i))
-+					txq_enable(mp->txq + i);
-+
-+			if (!netif_carrier_ok(dev)) {
-+				netif_carrier_on(dev);
-+				__txq_maybe_wake(mp->txq + mp->txq_primary);
-+			}
-+		} else if (netif_carrier_ok(dev)) {
-+			netif_stop_queue(dev);
-+			netif_carrier_off(dev);
-+		}
-+	}
-+
-+	/*
-+	 * RxBuffer or RxError set for any of the 8 queues?
-+	 */
-+#ifdef MV643XX_ETH_NAPI
-+	if (int_cause & INT_RX) {
-+		wrl(mp, INT_MASK(mp->port_num), 0x00000000);
-+		rdl(mp, INT_MASK(mp->port_num));
-+
-+		netif_rx_schedule(dev, &mp->napi);
-+	}
-+#else
-+	if (int_cause & INT_RX) {
-+		int i;
-+
-+		for (i = 7; i >= 0; i--)
-+			if (mp->rxq_mask & (1 << i))
-+				rxq_process(mp->rxq + i, INT_MAX);
-+	}
- #endif
- 
--#ifdef MV643XX_COAL
--	printk(KERN_NOTICE "%s: TX and RX Interrupt Coalescing ON \n",
--								dev->name);
--#endif
-+	txq_active = rdl(mp, TXQ_COMMAND(mp->port_num));
-+
-+	/*
-+	 * TxBuffer or TxError set for any of the 8 queues?
-+	 */
-+	if (int_cause_ext & INT_EXT_TX) {
-+		int i;
-+
-+		for (i = 0; i < 8; i++)
-+			if (mp->txq_mask & (1 << i))
-+				txq_reclaim(mp->txq + i, 0);
-+	}
-+
-+	/*
-+	 * Any TxEnd interrupts?
-+	 */
-+	if (int_cause & INT_TX_END) {
-+		int i;
-+
-+		wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END));
-+		for (i = 0; i < 8; i++) {
-+			struct tx_queue *txq = mp->txq + i;
-+			if (txq->tx_desc_count && !((txq_active >> i) & 1))
-+				txq_enable(txq);
-+		}
-+	}
-+
-+	/*
-+	 * Enough space again in the primary TX queue for a full packet?
-+	 */
-+	if (int_cause_ext & INT_EXT_TX) {
-+		struct tx_queue *txq = mp->txq + mp->txq_primary;
-+		__txq_maybe_wake(txq);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void phy_reset(struct mv643xx_eth_private *mp)
-+{
-+	unsigned int data;
-+
-+	smi_reg_read(mp, mp->phy_addr, 0, &data);
-+	data |= 0x8000;
-+	smi_reg_write(mp, mp->phy_addr, 0, data);
-+
-+	do {
-+		udelay(1);
-+		smi_reg_read(mp, mp->phy_addr, 0, &data);
-+	} while (data & 0x8000);
-+}
-+
-+static void port_start(struct mv643xx_eth_private *mp)
-+{
-+	u32 pscr;
-+	int i;
-+
-+	/*
-+	 * Configure basic link parameters.
-+	 */
-+	pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
-+	pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
-+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-+	pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
-+		DISABLE_AUTO_NEG_SPEED_GMII    |
-+		DISABLE_AUTO_NEG_FOR_DUPLEX    |
-+		DO_NOT_FORCE_LINK_FAIL	       |
-+		SERIAL_PORT_CONTROL_RESERVED;
-+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-+	pscr |= SERIAL_PORT_ENABLE;
-+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr);
-+
-+	wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE);
-+
-+	/*
-+	 * Perform PHY reset, if there is a PHY.
-+	 */
-+	if (mp->phy_addr != -1) {
-+		struct ethtool_cmd cmd;
-+
-+		mv643xx_eth_get_settings(mp->dev, &cmd);
-+		phy_reset(mp);
-+		mv643xx_eth_set_settings(mp->dev, &cmd);
-+	}
-+
-+	/*
-+	 * Configure TX path and queues.
-+	 */
-+	tx_set_rate(mp, 1000000000, 16777216);
-+	for (i = 0; i < 8; i++) {
-+		struct tx_queue *txq = mp->txq + i;
-+		int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i);
-+		u32 addr;
-+
-+		if ((mp->txq_mask & (1 << i)) == 0)
-+			continue;
-+
-+		addr = (u32)txq->tx_desc_dma;
-+		addr += txq->tx_curr_desc * sizeof(struct tx_desc);
-+		wrl(mp, off, addr);
-+
-+		txq_set_rate(txq, 1000000000, 16777216);
-+		txq_set_fixed_prio_mode(txq);
-+	}
-+
-+	/*
-+	 * Add configured unicast address to address filter table.
-+	 */
-+	uc_addr_set(mp, mp->dev->dev_addr);
-+
-+	/*
-+	 * Receive all unmatched unicast, TCP, UDP, BPDU and broadcast
-+	 * frames to RX queue #0.
-+	 */
-+	wrl(mp, PORT_CONFIG(mp->port_num), 0x00000000);
- 
--#ifdef MV643XX_NAPI
--	printk(KERN_NOTICE "%s: RX NAPI Enabled \n", dev->name);
--#endif
-+	/*
-+	 * Treat BPDUs as normal multicasts, and disable partition mode.
-+	 */
-+	wrl(mp, PORT_CONFIG_EXT(mp->port_num), 0x00000000);
- 
--	if (mp->tx_sram_size > 0)
--		printk(KERN_NOTICE "%s: Using SRAM\n", dev->name);
-+	/*
-+	 * Enable the receive queues.
-+	 */
-+	for (i = 0; i < 8; i++) {
-+		struct rx_queue *rxq = mp->rxq + i;
-+		int off = RXQ_CURRENT_DESC_PTR(mp->port_num, i);
-+		u32 addr;
- 
--	return 0;
-+		if ((mp->rxq_mask & (1 << i)) == 0)
-+			continue;
- 
--out:
--	free_netdev(dev);
-+		addr = (u32)rxq->rx_desc_dma;
-+		addr += rxq->rx_curr_desc * sizeof(struct rx_desc);
-+		wrl(mp, off, addr);
- 
--	return err;
-+		rxq_enable(rxq);
-+	}
- }
- 
--static int mv643xx_eth_remove(struct platform_device *pdev)
-+static void set_rx_coal(struct mv643xx_eth_private *mp, unsigned int delay)
- {
--	struct net_device *dev = platform_get_drvdata(pdev);
-+	unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
-+	u32 val;
- 
--	unregister_netdev(dev);
--	flush_scheduled_work();
-+	val = rdl(mp, SDMA_CONFIG(mp->port_num));
-+	if (mp->shared->extended_rx_coal_limit) {
-+		if (coal > 0xffff)
-+			coal = 0xffff;
-+		val &= ~0x023fff80;
-+		val |= (coal & 0x8000) << 10;
-+		val |= (coal & 0x7fff) << 7;
-+	} else {
-+		if (coal > 0x3fff)
-+			coal = 0x3fff;
-+		val &= ~0x003fff00;
-+		val |= (coal & 0x3fff) << 8;
-+	}
-+	wrl(mp, SDMA_CONFIG(mp->port_num), val);
-+}
- 
--	free_netdev(dev);
--	platform_set_drvdata(pdev, NULL);
--	return 0;
-+static void set_tx_coal(struct mv643xx_eth_private *mp, unsigned int delay)
-+{
-+	unsigned int coal = ((mp->shared->t_clk / 1000000) * delay) / 64;
-+
-+	if (coal > 0x3fff)
-+		coal = 0x3fff;
-+	wrl(mp, TX_FIFO_URGENT_THRESHOLD(mp->port_num), (coal & 0x3fff) << 4);
- }
- 
--static void mv643xx_eth_conf_mbus_windows(struct mv643xx_shared_private *msp,
--					  struct mbus_dram_target_info *dram)
-+static int mv643xx_eth_open(struct net_device *dev)
- {
--	void __iomem *base = msp->eth_base;
--	u32 win_enable;
--	u32 win_protect;
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	int err;
- 	int i;
- 
--	for (i = 0; i < 6; i++) {
--		writel(0, base + WINDOW_BASE(i));
--		writel(0, base + WINDOW_SIZE(i));
--		if (i < 4)
--			writel(0, base + WINDOW_REMAP_HIGH(i));
-+	wrl(mp, INT_CAUSE(mp->port_num), 0);
-+	wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
-+	rdl(mp, INT_CAUSE_EXT(mp->port_num));
-+
-+	err = request_irq(dev->irq, mv643xx_eth_irq,
-+			  IRQF_SHARED | IRQF_SAMPLE_RANDOM,
-+			  dev->name, dev);
-+	if (err) {
-+		dev_printk(KERN_ERR, &dev->dev, "can't assign irq\n");
-+		return -EAGAIN;
- 	}
- 
--	win_enable = 0x3f;
--	win_protect = 0;
--
--	for (i = 0; i < dram->num_cs; i++) {
--		struct mbus_dram_window *cs = dram->cs + i;
-+	init_mac_tables(mp);
- 
--		writel((cs->base & 0xffff0000) |
--			(cs->mbus_attr << 8) |
--			dram->mbus_dram_target_id, base + WINDOW_BASE(i));
--		writel((cs->size - 1) & 0xffff0000, base + WINDOW_SIZE(i));
-+	for (i = 0; i < 8; i++) {
-+		if ((mp->rxq_mask & (1 << i)) == 0)
-+			continue;
-+
-+		err = rxq_init(mp, i);
-+		if (err) {
-+			while (--i >= 0)
-+				if (mp->rxq_mask & (1 << i))
-+					rxq_deinit(mp->rxq + i);
-+			goto out;
-+		}
- 
--		win_enable &= ~(1 << i);
--		win_protect |= 3 << (2 * i);
-+		rxq_refill(mp->rxq + i);
- 	}
- 
--	writel(win_enable, base + WINDOW_BAR_ENABLE);
--	msp->win_protect = win_protect;
--}
--
--static int mv643xx_eth_shared_probe(struct platform_device *pdev)
--{
--	static int mv643xx_version_printed = 0;
--	struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
--	struct mv643xx_shared_private *msp;
--	struct resource *res;
--	int ret;
--
--	if (!mv643xx_version_printed++)
--		printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
--
--	ret = -EINVAL;
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	if (res == NULL)
--		goto out;
-+	for (i = 0; i < 8; i++) {
-+		if ((mp->txq_mask & (1 << i)) == 0)
-+			continue;
-+
-+		err = txq_init(mp, i);
-+		if (err) {
-+			while (--i >= 0)
-+				if (mp->txq_mask & (1 << i))
-+					txq_deinit(mp->txq + i);
-+			goto out_free;
-+		}
-+	}
- 
--	ret = -ENOMEM;
--	msp = kmalloc(sizeof(*msp), GFP_KERNEL);
--	if (msp == NULL)
--		goto out;
--	memset(msp, 0, sizeof(*msp));
-+#ifdef MV643XX_ETH_NAPI
-+	napi_enable(&mp->napi);
-+#endif
- 
--	msp->eth_base = ioremap(res->start, res->end - res->start + 1);
--	if (msp->eth_base == NULL)
--		goto out_free;
-+	port_start(mp);
- 
--	spin_lock_init(&msp->phy_lock);
--	msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
-+	set_rx_coal(mp, 0);
-+	set_tx_coal(mp, 0);
- 
--	platform_set_drvdata(pdev, msp);
-+	wrl(mp, INT_MASK_EXT(mp->port_num),
-+	    INT_EXT_LINK | INT_EXT_PHY | INT_EXT_TX);
- 
--	/*
--	 * (Re-)program MBUS remapping windows if we are asked to.
--	 */
--	if (pd != NULL && pd->dram != NULL)
--		mv643xx_eth_conf_mbus_windows(msp, pd->dram);
-+	wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
- 
- 	return 0;
- 
-+
- out_free:
--	kfree(msp);
-+	for (i = 0; i < 8; i++)
-+		if (mp->rxq_mask & (1 << i))
-+			rxq_deinit(mp->rxq + i);
- out:
--	return ret;
-+	free_irq(dev->irq, dev);
-+
-+	return err;
- }
- 
--static int mv643xx_eth_shared_remove(struct platform_device *pdev)
-+static void port_reset(struct mv643xx_eth_private *mp)
- {
--	struct mv643xx_shared_private *msp = platform_get_drvdata(pdev);
-+	unsigned int data;
-+	int i;
- 
--	iounmap(msp->eth_base);
--	kfree(msp);
-+	for (i = 0; i < 8; i++) {
-+		if (mp->rxq_mask & (1 << i))
-+			rxq_disable(mp->rxq + i);
-+		if (mp->txq_mask & (1 << i))
-+			txq_disable(mp->txq + i);
-+	}
-+	while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY))
-+		udelay(10);
- 
--	return 0;
-+	/* Reset the Enable bit in the Configuration Register */
-+	data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num));
-+	data &= ~(SERIAL_PORT_ENABLE		|
-+		  DO_NOT_FORCE_LINK_FAIL	|
-+		  FORCE_LINK_PASS);
-+	wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), data);
- }
- 
--static void mv643xx_eth_shutdown(struct platform_device *pdev)
-+static int mv643xx_eth_stop(struct net_device *dev)
- {
--	struct net_device *dev = platform_get_drvdata(pdev);
--	struct mv643xx_private *mp = netdev_priv(dev);
--	unsigned int port_num = mp->port_num;
--
--	/* Mask all interrupts on ethernet port */
--	wrl(mp, INTERRUPT_MASK_REG(port_num), 0);
--	rdl(mp, INTERRUPT_MASK_REG(port_num));
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	int i;
- 
--	eth_port_reset(mp);
--}
-+	wrl(mp, INT_MASK(mp->port_num), 0x00000000);
-+	rdl(mp, INT_MASK(mp->port_num));
- 
--static struct platform_driver mv643xx_eth_driver = {
--	.probe = mv643xx_eth_probe,
--	.remove = mv643xx_eth_remove,
--	.shutdown = mv643xx_eth_shutdown,
--	.driver = {
--		.name = MV643XX_ETH_NAME,
--		.owner	= THIS_MODULE,
--	},
--};
-+#ifdef MV643XX_ETH_NAPI
-+	napi_disable(&mp->napi);
-+#endif
-+	netif_carrier_off(dev);
-+	netif_stop_queue(dev);
- 
--static struct platform_driver mv643xx_eth_shared_driver = {
--	.probe = mv643xx_eth_shared_probe,
--	.remove = mv643xx_eth_shared_remove,
--	.driver = {
--		.name = MV643XX_ETH_SHARED_NAME,
--		.owner	= THIS_MODULE,
--	},
--};
-+	free_irq(dev->irq, dev);
- 
--/*
-- * mv643xx_init_module
-- *
-- * Registers the network drivers into the Linux kernel
-- *
-- * Input :	N/A
-- *
-- * Output :	N/A
-- */
--static int __init mv643xx_init_module(void)
--{
--	int rc;
-+	port_reset(mp);
-+	mib_counters_update(mp);
- 
--	rc = platform_driver_register(&mv643xx_eth_shared_driver);
--	if (!rc) {
--		rc = platform_driver_register(&mv643xx_eth_driver);
--		if (rc)
--			platform_driver_unregister(&mv643xx_eth_shared_driver);
-+	for (i = 0; i < 8; i++) {
-+		if (mp->rxq_mask & (1 << i))
-+			rxq_deinit(mp->rxq + i);
-+		if (mp->txq_mask & (1 << i))
-+			txq_deinit(mp->txq + i);
- 	}
--	return rc;
--}
- 
--/*
-- * mv643xx_cleanup_module
-- *
-- * Registers the network drivers into the Linux kernel
-- *
-- * Input :	N/A
-- *
-- * Output :	N/A
-- */
--static void __exit mv643xx_cleanup_module(void)
--{
--	platform_driver_unregister(&mv643xx_eth_driver);
--	platform_driver_unregister(&mv643xx_eth_shared_driver);
-+	return 0;
- }
- 
--module_init(mv643xx_init_module);
--module_exit(mv643xx_cleanup_module);
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR(	"Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
--		" and Dale Farnsworth");
--MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
--MODULE_ALIAS("platform:" MV643XX_ETH_NAME);
--MODULE_ALIAS("platform:" MV643XX_ETH_SHARED_NAME);
--
--/*
-- * The second part is the low level driver of the gigE ethernet ports.
-- */
--
--/*
-- * Marvell's Gigabit Ethernet controller low level driver
-- *
-- * DESCRIPTION:
-- *	This file introduce low level API to Marvell's Gigabit Ethernet
-- *		controller. This Gigabit Ethernet Controller driver API controls
-- *		1) Operations (i.e. port init, start, reset etc').
-- *		2) Data flow (i.e. port send, receive etc').
-- *		Each Gigabit Ethernet port is controlled via
-- *		struct mv643xx_private.
-- *		This struct includes user configuration information as well as
-- *		driver internal data needed for its operations.
-- *
-- *		Supported Features:
-- *		- This low level driver is OS independent. Allocating memory for
-- *		  the descriptor rings and buffers are not within the scope of
-- *		  this driver.
-- *		- The user is free from Rx/Tx queue managing.
-- *		- This low level driver introduce functionality API that enable
-- *		  the to operate Marvell's Gigabit Ethernet Controller in a
-- *		  convenient way.
-- *		- Simple Gigabit Ethernet port operation API.
-- *		- Simple Gigabit Ethernet port data flow API.
-- *		- Data flow and operation API support per queue functionality.
-- *		- Support cached descriptors for better performance.
-- *		- Enable access to all four DRAM banks and internal SRAM memory
-- *		  spaces.
-- *		- PHY access and control API.
-- *		- Port control register configuration API.
-- *		- Full control over Unicast and Multicast MAC configurations.
-- *
-- *		Operation flow:
-- *
-- *		Initialization phase
-- *		This phase complete the initialization of the the
-- *		mv643xx_private struct.
-- *		User information regarding port configuration has to be set
-- *		prior to calling the port initialization routine.
-- *
-- *		In this phase any port Tx/Rx activity is halted, MIB counters
-- *		are cleared, PHY address is set according to user parameter and
-- *		access to DRAM and internal SRAM memory spaces.
-- *
-- *		Driver ring initialization
-- *		Allocating memory for the descriptor rings and buffers is not
-- *		within the scope of this driver. Thus, the user is required to
-- *		allocate memory for the descriptors ring and buffers. Those
-- *		memory parameters are used by the Rx and Tx ring initialization
-- *		routines in order to curve the descriptor linked list in a form
-- *		of a ring.
-- *		Note: Pay special attention to alignment issues when using
-- *		cached descriptors/buffers. In this phase the driver store
-- *		information in the mv643xx_private struct regarding each queue
-- *		ring.
-- *
-- *		Driver start
-- *		This phase prepares the Ethernet port for Rx and Tx activity.
-- *		It uses the information stored in the mv643xx_private struct to
-- *		initialize the various port registers.
-- *
-- *		Data flow:
-- *		All packet references to/from the driver are done using
-- *		struct pkt_info.
-- *		This struct is a unified struct used with Rx and Tx operations.
-- *		This way the user is not required to be familiar with neither
-- *		Tx nor Rx descriptors structures.
-- *		The driver's descriptors rings are management by indexes.
-- *		Those indexes controls the ring resources and used to indicate
-- *		a SW resource error:
-- *		'current'
-- *		This index points to the current available resource for use. For
-- *		example in Rx process this index will point to the descriptor
-- *		that will be passed to the user upon calling the receive
-- *		routine.  In Tx process, this index will point to the descriptor
-- *		that will be assigned with the user packet info and transmitted.
-- *		'used'
-- *		This index points to the descriptor that need to restore its
-- *		resources. For example in Rx process, using the Rx buffer return
-- *		API will attach the buffer returned in packet info to the
-- *		descriptor pointed by 'used'. In Tx process, using the Tx
-- *		descriptor return will merely return the user packet info with
-- *		the command status of the transmitted buffer pointed by the
-- *		'used' index. Nevertheless, it is essential to use this routine
-- *		to update the 'used' index.
-- *		'first'
-- *		This index supports Tx Scatter-Gather. It points to the first
-- *		descriptor of a packet assembled of multiple buffers. For
-- *		example when in middle of Such packet we have a Tx resource
-- *		error the 'curr' index get the value of 'first' to indicate
-- *		that the ring returned to its state before trying to transmit
-- *		this packet.
-- *
-- *		Receive operation:
-- *		The eth_port_receive API set the packet information struct,
-- *		passed by the caller, with received information from the
-- *		'current' SDMA descriptor.
-- *		It is the user responsibility to return this resource back
-- *		to the Rx descriptor ring to enable the reuse of this source.
-- *		Return Rx resource is done using the eth_rx_return_buff API.
-- *
-- *	Prior to calling the initialization routine eth_port_init() the user
-- *	must set the following fields under mv643xx_private struct:
-- *	port_num		User Ethernet port number.
-- *	port_config		User port configuration value.
-- *	port_config_extend	User port config extend value.
-- *	port_sdma_config	User port SDMA config value.
-- *	port_serial_control	User port serial control value.
-- *
-- *		This driver data flow is done using the struct pkt_info which
-- *		is a unified struct for Rx and Tx operations:
-- *
-- *		byte_cnt	Tx/Rx descriptor buffer byte count.
-- *		l4i_chk		CPU provided TCP Checksum. For Tx operation
-- *				only.
-- *		cmd_sts		Tx/Rx descriptor command status.
-- *		buf_ptr		Tx/Rx descriptor buffer pointer.
-- *		return_info	Tx/Rx user resource return information.
-- */
--
--/* Ethernet Port routines */
--static void eth_port_set_filter_table_entry(struct mv643xx_private *mp,
--					    int table, unsigned char entry);
--
--/*
-- * eth_port_init - Initialize the Ethernet port driver
-- *
-- * DESCRIPTION:
-- *	This function prepares the ethernet port to start its activity:
-- *	1) Completes the ethernet port driver struct initialization toward port
-- *		start routine.
-- *	2) Resets the device to a quiescent state in case of warm reboot.
-- *	3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
-- *	4) Clean MAC tables. The reset status of those tables is unknown.
-- *	5) Set PHY address.
-- *	Note: Call this routine prior to eth_port_start routine and after
-- *	setting user values in the user fields of Ethernet port control
-- *	struct.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet port control struct
-- *
-- * OUTPUT:
-- *	See description.
-- *
-- * RETURN:
-- *	None.
-- */
--static void eth_port_init(struct mv643xx_private *mp)
-+static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
--	mp->rx_resource_err = 0;
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
- 
--	eth_port_reset(mp);
-+	if (mp->phy_addr != -1)
-+		return generic_mii_ioctl(&mp->mii, if_mii(ifr), cmd, NULL);
- 
--	eth_port_init_mac_tables(mp);
-+	return -EOPNOTSUPP;
- }
- 
--/*
-- * eth_port_start - Start the Ethernet port activity.
-- *
-- * DESCRIPTION:
-- *	This routine prepares the Ethernet port for Rx and Tx activity:
-- *	 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
-- *	    has been initialized a descriptor's ring (using
-- *	    ether_init_tx_desc_ring for Tx and ether_init_rx_desc_ring for Rx)
-- *	 2. Initialize and enable the Ethernet configuration port by writing to
-- *	    the port's configuration and command registers.
-- *	 3. Initialize and enable the SDMA by writing to the SDMA's
-- *	    configuration and command registers.  After completing these steps,
-- *	    the ethernet port SDMA can starts to perform Rx and Tx activities.
-- *
-- *	Note: Each Rx and Tx queue descriptor's list must be initialized prior
-- *	to calling this function (use ether_init_tx_desc_ring for Tx queues
-- *	and ether_init_rx_desc_ring for Rx queues).
-- *
-- * INPUT:
-- *	dev - a pointer to the required interface
-- *
-- * OUTPUT:
-- *	Ethernet port is ready to receive and transmit.
-- *
-- * RETURN:
-- *	None.
-- */
--static void eth_port_start(struct net_device *dev)
-+static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--	unsigned int port_num = mp->port_num;
--	int tx_curr_desc, rx_curr_desc;
--	u32 pscr;
--	struct ethtool_cmd ethtool_cmd;
--
--	/* Assignment of Tx CTRP of given queue */
--	tx_curr_desc = mp->tx_curr_desc_q;
--	wrl(mp, TX_CURRENT_QUEUE_DESC_PTR_0(port_num),
--		(u32)((struct eth_tx_desc *)mp->tx_desc_dma + tx_curr_desc));
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
- 
--	/* Assignment of Rx CRDP of given queue */
--	rx_curr_desc = mp->rx_curr_desc_q;
--	wrl(mp, RX_CURRENT_QUEUE_DESC_PTR_0(port_num),
--		(u32)((struct eth_rx_desc *)mp->rx_desc_dma + rx_curr_desc));
--
--	/* Add the assigned Ethernet address to the port's address table */
--	eth_port_uc_addr_set(mp, dev->dev_addr);
-+	if (new_mtu < 64 || new_mtu > 9500)
-+		return -EINVAL;
- 
--	/* Assign port configuration and command. */
--	wrl(mp, PORT_CONFIG_REG(port_num),
--			  PORT_CONFIG_DEFAULT_VALUE);
-+	dev->mtu = new_mtu;
-+	tx_set_rate(mp, 1000000000, 16777216);
- 
--	wrl(mp, PORT_CONFIG_EXTEND_REG(port_num),
--			  PORT_CONFIG_EXTEND_DEFAULT_VALUE);
-+	if (!netif_running(dev))
-+		return 0;
- 
--	pscr = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
-+	/*
-+	 * Stop and then re-open the interface. This will allocate RX
-+	 * skbs of the new MTU.
-+	 * There is a possible danger that the open will not succeed,
-+	 * due to memory being full.
-+	 */
-+	mv643xx_eth_stop(dev);
-+	if (mv643xx_eth_open(dev)) {
-+		dev_printk(KERN_ERR, &dev->dev,
-+			   "fatal error on re-opening device after "
-+			   "MTU change\n");
-+	}
- 
--	pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
--	wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
-+	return 0;
-+}
- 
--	pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
--		DISABLE_AUTO_NEG_SPEED_GMII    |
--		DISABLE_AUTO_NEG_FOR_DUPLX     |
--		DO_NOT_FORCE_LINK_FAIL	   |
--		SERIAL_PORT_CONTROL_RESERVED;
-+static void tx_timeout_task(struct work_struct *ugly)
-+{
-+	struct mv643xx_eth_private *mp;
- 
--	wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
-+	mp = container_of(ugly, struct mv643xx_eth_private, tx_timeout_task);
-+	if (netif_running(mp->dev)) {
-+		netif_stop_queue(mp->dev);
- 
--	pscr |= SERIAL_PORT_ENABLE;
--	wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
-+		port_reset(mp);
-+		port_start(mp);
- 
--	/* Assign port SDMA configuration */
--	wrl(mp, SDMA_CONFIG_REG(port_num),
--			  PORT_SDMA_CONFIG_DEFAULT_VALUE);
--
--	/* Enable port Rx. */
--	mv643xx_eth_port_enable_rx(mp, ETH_RX_QUEUES_ENABLED);
--
--	/* Disable port bandwidth limits by clearing MTU register */
--	wrl(mp, MAXIMUM_TRANSMIT_UNIT(port_num), 0);
--
--	/* save phy settings across reset */
--	mv643xx_get_settings(dev, &ethtool_cmd);
--	ethernet_phy_reset(mp);
--	mv643xx_set_settings(dev, &ethtool_cmd);
-+		__txq_maybe_wake(mp->txq + mp->txq_primary);
-+	}
- }
- 
--/*
-- * eth_port_uc_addr_set - Write a MAC address into the port's hw registers
-- */
--static void eth_port_uc_addr_set(struct mv643xx_private *mp,
--				 unsigned char *p_addr)
-+static void mv643xx_eth_tx_timeout(struct net_device *dev)
- {
--	unsigned int port_num = mp->port_num;
--	unsigned int mac_h;
--	unsigned int mac_l;
--	int table;
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
- 
--	mac_l = (p_addr[4] << 8) | (p_addr[5]);
--	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
--							(p_addr[3] << 0);
--
--	wrl(mp, MAC_ADDR_LOW(port_num), mac_l);
--	wrl(mp, MAC_ADDR_HIGH(port_num), mac_h);
--
--	/* Accept frames with this address */
--	table = DA_FILTER_UNICAST_TABLE_BASE(port_num);
--	eth_port_set_filter_table_entry(mp, table, p_addr[5] & 0x0f);
-+	dev_printk(KERN_INFO, &dev->dev, "tx timeout\n");
-+
-+	schedule_work(&mp->tx_timeout_task);
- }
- 
--/*
-- * eth_port_uc_addr_get - Read the MAC address from the port's hw registers
-- */
--static void eth_port_uc_addr_get(struct mv643xx_private *mp,
--				 unsigned char *p_addr)
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void mv643xx_eth_netpoll(struct net_device *dev)
- {
--	unsigned int port_num = mp->port_num;
--	unsigned int mac_h;
--	unsigned int mac_l;
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+
-+	wrl(mp, INT_MASK(mp->port_num), 0x00000000);
-+	rdl(mp, INT_MASK(mp->port_num));
- 
--	mac_h = rdl(mp, MAC_ADDR_HIGH(port_num));
--	mac_l = rdl(mp, MAC_ADDR_LOW(port_num));
-+	mv643xx_eth_irq(dev->irq, dev);
- 
--	p_addr[0] = (mac_h >> 24) & 0xff;
--	p_addr[1] = (mac_h >> 16) & 0xff;
--	p_addr[2] = (mac_h >> 8) & 0xff;
--	p_addr[3] = mac_h & 0xff;
--	p_addr[4] = (mac_l >> 8) & 0xff;
--	p_addr[5] = mac_l & 0xff;
-+	wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_CAUSE_EXT);
- }
-+#endif
- 
--/*
-- * The entries in each table are indexed by a hash of a packet's MAC
-- * address.  One bit in each entry determines whether the packet is
-- * accepted.  There are 4 entries (each 8 bits wide) in each register
-- * of the table.  The bits in each entry are defined as follows:
-- *	0	Accept=1, Drop=0
-- *	3-1	Queue			(ETH_Q0=0)
-- *	7-4	Reserved = 0;
-- */
--static void eth_port_set_filter_table_entry(struct mv643xx_private *mp,
--					    int table, unsigned char entry)
-+static int mv643xx_eth_mdio_read(struct net_device *dev, int addr, int reg)
- {
--	unsigned int table_reg;
--	unsigned int tbl_offset;
--	unsigned int reg_offset;
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	int val;
- 
--	tbl_offset = (entry / 4) * 4;	/* Register offset of DA table entry */
--	reg_offset = entry % 4;		/* Entry offset within the register */
-+	smi_reg_read(mp, addr, reg, &val);
- 
--	/* Set "accepts frame bit" at specified table entry */
--	table_reg = rdl(mp, table + tbl_offset);
--	table_reg |= 0x01 << (8 * reg_offset);
--	wrl(mp, table + tbl_offset, table_reg);
-+	return val;
- }
- 
--/*
-- * eth_port_mc_addr - Multicast address settings.
-- *
-- * The MV device supports multicast using two tables:
-- * 1) Special Multicast Table for MAC addresses of the form
-- *    0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_FF).
-- *    The MAC DA[7:0] bits are used as a pointer to the Special Multicast
-- *    Table entries in the DA-Filter table.
-- * 2) Other Multicast Table for multicast of another type. A CRC-8bit
-- *    is used as an index to the Other Multicast Table entries in the
-- *    DA-Filter table.  This function calculates the CRC-8bit value.
-- * In either case, eth_port_set_filter_table_entry() is then called
-- * to set to set the actual table entry.
-- */
--static void eth_port_mc_addr(struct mv643xx_private *mp, unsigned char *p_addr)
-+static void mv643xx_eth_mdio_write(struct net_device *dev, int addr, int reg, int val)
- {
--	unsigned int port_num = mp->port_num;
--	unsigned int mac_h;
--	unsigned int mac_l;
--	unsigned char crc_result = 0;
--	int table;
--	int mac_array[48];
--	int crc[8];
--	int i;
-+	struct mv643xx_eth_private *mp = netdev_priv(dev);
-+	smi_reg_write(mp, addr, reg, val);
-+}
- 
--	if ((p_addr[0] == 0x01) && (p_addr[1] == 0x00) &&
--	    (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) {
--		table = DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port_num);
--		eth_port_set_filter_table_entry(mp, table, p_addr[5]);
--		return;
--	}
- 
--	/* Calculate CRC-8 out of the given address */
--	mac_h = (p_addr[0] << 8) | (p_addr[1]);
--	mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
--			(p_addr[4] << 8) | (p_addr[5] << 0);
--
--	for (i = 0; i < 32; i++)
--		mac_array[i] = (mac_l >> i) & 0x1;
--	for (i = 32; i < 48; i++)
--		mac_array[i] = (mac_h >> (i - 32)) & 0x1;
--
--	crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ mac_array[39] ^
--		 mac_array[35] ^ mac_array[34] ^ mac_array[31] ^ mac_array[30] ^
--		 mac_array[28] ^ mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
--		 mac_array[18] ^ mac_array[16] ^ mac_array[14] ^ mac_array[12] ^
--		 mac_array[8]  ^ mac_array[7]  ^ mac_array[6]  ^ mac_array[0];
--
--	crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ mac_array[43] ^
--		 mac_array[41] ^ mac_array[39] ^ mac_array[36] ^ mac_array[34] ^
--		 mac_array[32] ^ mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
--		 mac_array[24] ^ mac_array[23] ^ mac_array[22] ^ mac_array[21] ^
--		 mac_array[20] ^ mac_array[18] ^ mac_array[17] ^ mac_array[16] ^
--		 mac_array[15] ^ mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
--		 mac_array[9]  ^ mac_array[6]  ^ mac_array[1]  ^ mac_array[0];
--
--	crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^ mac_array[43] ^
--		 mac_array[42] ^ mac_array[39] ^ mac_array[37] ^ mac_array[34] ^
--		 mac_array[33] ^ mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
--		 mac_array[24] ^ mac_array[22] ^ mac_array[17] ^ mac_array[15] ^
--		 mac_array[13] ^ mac_array[12] ^ mac_array[10] ^ mac_array[8]  ^
--		 mac_array[6]  ^ mac_array[2]  ^ mac_array[1]  ^ mac_array[0];
--
--	crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^ mac_array[43] ^
--		 mac_array[40] ^ mac_array[38] ^ mac_array[35] ^ mac_array[34] ^
--		 mac_array[30] ^ mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
--		 mac_array[23] ^ mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
--		 mac_array[13] ^ mac_array[11] ^ mac_array[9]  ^ mac_array[7]  ^
--		 mac_array[3]  ^ mac_array[2]  ^ mac_array[1];
--
--	crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ mac_array[41] ^
--		 mac_array[39] ^ mac_array[36] ^ mac_array[35] ^ mac_array[31] ^
--		 mac_array[30] ^ mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
--		 mac_array[19] ^ mac_array[17] ^ mac_array[15] ^ mac_array[14] ^
--		 mac_array[12] ^ mac_array[10] ^ mac_array[8]  ^ mac_array[4]  ^
--		 mac_array[3]  ^ mac_array[2];
--
--	crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^ mac_array[42] ^
--		 mac_array[40] ^ mac_array[37] ^ mac_array[36] ^ mac_array[32] ^
--		 mac_array[31] ^ mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
--		 mac_array[20] ^ mac_array[18] ^ mac_array[16] ^ mac_array[15] ^
--		 mac_array[13] ^ mac_array[11] ^ mac_array[9]  ^ mac_array[5]  ^
--		 mac_array[4]  ^ mac_array[3];
--
--	crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^ mac_array[41] ^
--		 mac_array[38] ^ mac_array[37] ^ mac_array[33] ^ mac_array[32] ^
--		 mac_array[29] ^ mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
--		 mac_array[19] ^ mac_array[17] ^ mac_array[16] ^ mac_array[14] ^
--		 mac_array[12] ^ mac_array[10] ^ mac_array[6]  ^ mac_array[5]  ^
--		 mac_array[4];
--
--	crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^ mac_array[39] ^
--		 mac_array[38] ^ mac_array[34] ^ mac_array[33] ^ mac_array[30] ^
--		 mac_array[29] ^ mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
--		 mac_array[18] ^ mac_array[17] ^ mac_array[15] ^ mac_array[13] ^
--		 mac_array[11] ^ mac_array[7]  ^ mac_array[6]  ^ mac_array[5];
-+/* platform glue ************************************************************/
-+static void
-+mv643xx_eth_conf_mbus_windows(struct mv643xx_eth_shared_private *msp,
-+			      struct mbus_dram_target_info *dram)
-+{
-+	void __iomem *base = msp->base;
-+	u32 win_enable;
-+	u32 win_protect;
-+	int i;
- 
--	for (i = 0; i < 8; i++)
--		crc_result = crc_result | (crc[i] << i);
-+	for (i = 0; i < 6; i++) {
-+		writel(0, base + WINDOW_BASE(i));
-+		writel(0, base + WINDOW_SIZE(i));
-+		if (i < 4)
-+			writel(0, base + WINDOW_REMAP_HIGH(i));
-+	}
- 
--	table = DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port_num);
--	eth_port_set_filter_table_entry(mp, table, crc_result);
--}
-+	win_enable = 0x3f;
-+	win_protect = 0;
- 
--/*
-- * Set the entire multicast list based on dev->mc_list.
-- */
--static void eth_port_set_multicast_list(struct net_device *dev)
--{
-+	for (i = 0; i < dram->num_cs; i++) {
-+		struct mbus_dram_window *cs = dram->cs + i;
- 
--	struct dev_mc_list	*mc_list;
--	int			i;
--	int			table_index;
--	struct mv643xx_private	*mp = netdev_priv(dev);
--	unsigned int		eth_port_num = mp->port_num;
--
--	/* If the device is in promiscuous mode or in all multicast mode,
--	 * we will fully populate both multicast tables with accept.
--	 * This is guaranteed to yield a match on all multicast addresses...
--	 */
--	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI)) {
--		for (table_index = 0; table_index <= 0xFC; table_index += 4) {
--			/* Set all entries in DA filter special multicast
--			 * table (Ex_dFSMT)
--			 * Set for ETH_Q0 for now
--			 * Bits
--			 * 0	  Accept=1, Drop=0
--			 * 3-1  Queue	 ETH_Q0=0
--			 * 7-4  Reserved = 0;
--			 */
--			wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
-+		writel((cs->base & 0xffff0000) |
-+			(cs->mbus_attr << 8) |
-+			dram->mbus_dram_target_id, base + WINDOW_BASE(i));
-+		writel((cs->size - 1) & 0xffff0000, base + WINDOW_SIZE(i));
- 
--			/* Set all entries in DA filter other multicast
--			 * table (Ex_dFOMT)
--			 * Set for ETH_Q0 for now
--			 * Bits
--			 * 0	  Accept=1, Drop=0
--			 * 3-1  Queue	 ETH_Q0=0
--			 * 7-4  Reserved = 0;
--			 */
--			wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
--		}
--		return;
-+		win_enable &= ~(1 << i);
-+		win_protect |= 3 << (2 * i);
- 	}
- 
--	/* We will clear out multicast tables every time we get the list.
--	 * Then add the entire new list...
--	 */
--	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
--		/* Clear DA filter special multicast table (Ex_dFSMT) */
--		wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
--				(eth_port_num) + table_index, 0);
--
--		/* Clear DA filter other multicast table (Ex_dFOMT) */
--		wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE
--				(eth_port_num) + table_index, 0);
--	}
--
--	/* Get pointer to net_device multicast list and add each one... */
--	for (i = 0, mc_list = dev->mc_list;
--			(i < 256) && (mc_list != NULL) && (i < dev->mc_count);
--			i++, mc_list = mc_list->next)
--		if (mc_list->dmi_addrlen == 6)
--			eth_port_mc_addr(mp, mc_list->dmi_addr);
-+	writel(win_enable, base + WINDOW_BAR_ENABLE);
-+	msp->win_protect = win_protect;
- }
- 
--/*
-- * eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
-- *
-- * DESCRIPTION:
-- *	Go through all the DA filter tables (Unicast, Special Multicast &
-- *	Other Multicast) and set each entry to 0.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *
-- * OUTPUT:
-- *	Multicast and Unicast packets are rejected.
-- *
-- * RETURN:
-- *	None.
-- */
--static void eth_port_init_mac_tables(struct mv643xx_private *mp)
-+static void infer_hw_params(struct mv643xx_eth_shared_private *msp)
- {
--	unsigned int port_num = mp->port_num;
--	int table_index;
-+	/*
-+	 * Check whether we have a 14-bit coal limit field in bits
-+	 * [21:8], or a 16-bit coal limit in bits [25,21:7] of the
-+	 * SDMA config register.
-+	 */
-+	writel(0x02000000, msp->base + SDMA_CONFIG(0));
-+	if (readl(msp->base + SDMA_CONFIG(0)) & 0x02000000)
-+		msp->extended_rx_coal_limit = 1;
-+	else
-+		msp->extended_rx_coal_limit = 0;
- 
--	/* Clear DA filter unicast table (Ex_dFUT) */
--	for (table_index = 0; table_index <= 0xC; table_index += 4)
--		wrl(mp, DA_FILTER_UNICAST_TABLE_BASE(port_num) +
--					table_index, 0);
--
--	for (table_index = 0; table_index <= 0xFC; table_index += 4) {
--		/* Clear DA filter special multicast table (Ex_dFSMT) */
--		wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port_num) +
--					table_index, 0);
--		/* Clear DA filter other multicast table (Ex_dFOMT) */
--		wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port_num) +
--					table_index, 0);
--	}
-+	/*
-+	 * Check whether the TX rate control registers are in the
-+	 * old or the new place.
-+	 */
-+	writel(1, msp->base + TX_BW_MTU_MOVED(0));
-+	if (readl(msp->base + TX_BW_MTU_MOVED(0)) & 1)
-+		msp->tx_bw_control_moved = 1;
-+	else
-+		msp->tx_bw_control_moved = 0;
- }
- 
--/*
-- * eth_clear_mib_counters - Clear all MIB counters
-- *
-- * DESCRIPTION:
-- *	This function clears all MIB counters of a specific ethernet port.
-- *	A read from the MIB counter will reset the counter.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *
-- * OUTPUT:
-- *	After reading all MIB counters, the counters resets.
-- *
-- * RETURN:
-- *	MIB counter value.
-- *
-- */
--static void eth_clear_mib_counters(struct mv643xx_private *mp)
-+static int mv643xx_eth_shared_probe(struct platform_device *pdev)
- {
--	unsigned int port_num = mp->port_num;
--	int i;
--
--	/* Perform dummy reads from MIB counters */
--	for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
--									i += 4)
--		rdl(mp, MIB_COUNTERS_BASE(port_num) + i);
--}
-+	static int mv643xx_eth_version_printed = 0;
-+	struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
-+	struct mv643xx_eth_shared_private *msp;
-+	struct resource *res;
-+	int ret;
- 
--static inline u32 read_mib(struct mv643xx_private *mp, int offset)
--{
--	return rdl(mp, MIB_COUNTERS_BASE(mp->port_num) + offset);
--}
-+	if (!mv643xx_eth_version_printed++)
-+		printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
- 
--static void eth_update_mib_counters(struct mv643xx_private *mp)
--{
--	struct mv643xx_mib_counters *p = &mp->mib_counters;
--	int offset;
-+	ret = -EINVAL;
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (res == NULL)
-+		goto out;
- 
--	p->good_octets_received +=
--		read_mib(mp, ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
--	p->good_octets_received +=
--		(u64)read_mib(mp, ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32;
-+	ret = -ENOMEM;
-+	msp = kmalloc(sizeof(*msp), GFP_KERNEL);
-+	if (msp == NULL)
-+		goto out;
-+	memset(msp, 0, sizeof(*msp));
- 
--	for (offset = ETH_MIB_BAD_OCTETS_RECEIVED;
--			offset <= ETH_MIB_FRAMES_1024_TO_MAX_OCTETS;
--			offset += 4)
--		*(u32 *)((char *)p + offset) += read_mib(mp, offset);
-+	msp->base = ioremap(res->start, res->end - res->start + 1);
-+	if (msp->base == NULL)
-+		goto out_free;
- 
--	p->good_octets_sent += read_mib(mp, ETH_MIB_GOOD_OCTETS_SENT_LOW);
--	p->good_octets_sent +=
--		(u64)read_mib(mp, ETH_MIB_GOOD_OCTETS_SENT_HIGH) << 32;
-+	spin_lock_init(&msp->phy_lock);
- 
--	for (offset = ETH_MIB_GOOD_FRAMES_SENT;
--			offset <= ETH_MIB_LATE_COLLISION;
--			offset += 4)
--		*(u32 *)((char *)p + offset) += read_mib(mp, offset);
--}
-+	/*
-+	 * (Re-)program MBUS remapping windows if we are asked to.
-+	 */
-+	if (pd != NULL && pd->dram != NULL)
-+		mv643xx_eth_conf_mbus_windows(msp, pd->dram);
- 
--/*
-- * ethernet_phy_detect - Detect whether a phy is present
-- *
-- * DESCRIPTION:
-- *	This function tests whether there is a PHY present on
-- *	the specified port.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *
-- * OUTPUT:
-- *	None
-- *
-- * RETURN:
-- *	0 on success
-- *	-ENODEV on failure
-- *
-- */
--static int ethernet_phy_detect(struct mv643xx_private *mp)
--{
--	unsigned int phy_reg_data0;
--	int auto_neg;
-+	/*
-+	 * Detect hardware parameters.
-+	 */
-+	msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
-+	infer_hw_params(msp);
- 
--	eth_port_read_smi_reg(mp, 0, &phy_reg_data0);
--	auto_neg = phy_reg_data0 & 0x1000;
--	phy_reg_data0 ^= 0x1000;	/* invert auto_neg */
--	eth_port_write_smi_reg(mp, 0, phy_reg_data0);
--
--	eth_port_read_smi_reg(mp, 0, &phy_reg_data0);
--	if ((phy_reg_data0 & 0x1000) == auto_neg)
--		return -ENODEV;				/* change didn't take */
-+	platform_set_drvdata(pdev, msp);
- 
--	phy_reg_data0 ^= 0x1000;
--	eth_port_write_smi_reg(mp, 0, phy_reg_data0);
- 	return 0;
-+
-+out_free:
-+	kfree(msp);
-+out:
-+	return ret;
- }
- 
--/*
-- * ethernet_phy_get - Get the ethernet port PHY address.
-- *
-- * DESCRIPTION:
-- *	This routine returns the given ethernet port PHY address.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *
-- * OUTPUT:
-- *	None.
-- *
-- * RETURN:
-- *	PHY address.
-- *
-- */
--static int ethernet_phy_get(struct mv643xx_private *mp)
-+static int mv643xx_eth_shared_remove(struct platform_device *pdev)
- {
--	unsigned int reg_data;
-+	struct mv643xx_eth_shared_private *msp = platform_get_drvdata(pdev);
- 
--	reg_data = rdl(mp, PHY_ADDR_REG);
-+	iounmap(msp->base);
-+	kfree(msp);
- 
--	return ((reg_data >> (5 * mp->port_num)) & 0x1f);
-+	return 0;
- }
- 
--/*
-- * ethernet_phy_set - Set the ethernet port PHY address.
-- *
-- * DESCRIPTION:
-- *	This routine sets the given ethernet port PHY address.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *	int		phy_addr	PHY address.
-- *
-- * OUTPUT:
-- *	None.
-- *
-- * RETURN:
-- *	None.
-- *
-- */
--static void ethernet_phy_set(struct mv643xx_private *mp, int phy_addr)
-+static struct platform_driver mv643xx_eth_shared_driver = {
-+	.probe		= mv643xx_eth_shared_probe,
-+	.remove		= mv643xx_eth_shared_remove,
-+	.driver = {
-+		.name	= MV643XX_ETH_SHARED_NAME,
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static void phy_addr_set(struct mv643xx_eth_private *mp, int phy_addr)
- {
--	u32 reg_data;
- 	int addr_shift = 5 * mp->port_num;
-+	u32 data;
- 
--	reg_data = rdl(mp, PHY_ADDR_REG);
--	reg_data &= ~(0x1f << addr_shift);
--	reg_data |= (phy_addr & 0x1f) << addr_shift;
--	wrl(mp, PHY_ADDR_REG, reg_data);
-+	data = rdl(mp, PHY_ADDR);
-+	data &= ~(0x1f << addr_shift);
-+	data |= (phy_addr & 0x1f) << addr_shift;
-+	wrl(mp, PHY_ADDR, data);
- }
- 
--/*
-- * ethernet_phy_reset - Reset Ethernet port PHY.
-- *
-- * DESCRIPTION:
-- *	This routine utilizes the SMI interface to reset the ethernet port PHY.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *
-- * OUTPUT:
-- *	The PHY is reset.
-- *
-- * RETURN:
-- *	None.
-- *
-- */
--static void ethernet_phy_reset(struct mv643xx_private *mp)
-+static int phy_addr_get(struct mv643xx_eth_private *mp)
- {
--	unsigned int phy_reg_data;
-+	unsigned int data;
- 
--	/* Reset the PHY */
--	eth_port_read_smi_reg(mp, 0, &phy_reg_data);
--	phy_reg_data |= 0x8000;	/* Set bit 15 to reset the PHY */
--	eth_port_write_smi_reg(mp, 0, phy_reg_data);
-+	data = rdl(mp, PHY_ADDR);
- 
--	/* wait for PHY to come out of reset */
--	do {
--		udelay(1);
--		eth_port_read_smi_reg(mp, 0, &phy_reg_data);
--	} while (phy_reg_data & 0x8000);
-+	return (data >> (5 * mp->port_num)) & 0x1f;
- }
- 
--static void mv643xx_eth_port_enable_tx(struct mv643xx_private *mp,
--					unsigned int queues)
-+static void set_params(struct mv643xx_eth_private *mp,
-+		       struct mv643xx_eth_platform_data *pd)
- {
--	wrl(mp, TRANSMIT_QUEUE_COMMAND_REG(mp->port_num), queues);
--}
-+	struct net_device *dev = mp->dev;
- 
--static void mv643xx_eth_port_enable_rx(struct mv643xx_private *mp,
--					unsigned int queues)
--{
--	wrl(mp, RECEIVE_QUEUE_COMMAND_REG(mp->port_num), queues);
--}
-+	if (is_valid_ether_addr(pd->mac_addr))
-+		memcpy(dev->dev_addr, pd->mac_addr, 6);
-+	else
-+		uc_addr_get(mp, dev->dev_addr);
- 
--static unsigned int mv643xx_eth_port_disable_tx(struct mv643xx_private *mp)
--{
--	unsigned int port_num = mp->port_num;
--	u32 queues;
-+	if (pd->phy_addr == -1) {
-+		mp->shared_smi = NULL;
-+		mp->phy_addr = -1;
-+	} else {
-+		mp->shared_smi = mp->shared;
-+		if (pd->shared_smi != NULL)
-+			mp->shared_smi = platform_get_drvdata(pd->shared_smi);
-+
-+		if (pd->force_phy_addr || pd->phy_addr) {
-+			mp->phy_addr = pd->phy_addr & 0x3f;
-+			phy_addr_set(mp, mp->phy_addr);
-+		} else {
-+			mp->phy_addr = phy_addr_get(mp);
-+		}
-+	}
- 
--	/* Stop Tx port activity. Check port Tx activity. */
--	queues = rdl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF;
--	if (queues) {
--		/* Issue stop command for active queues only */
--		wrl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num), (queues << 8));
-+	mp->default_rx_ring_size = DEFAULT_RX_QUEUE_SIZE;
-+	if (pd->rx_queue_size)
-+		mp->default_rx_ring_size = pd->rx_queue_size;
-+	mp->rx_desc_sram_addr = pd->rx_sram_addr;
-+	mp->rx_desc_sram_size = pd->rx_sram_size;
- 
--		/* Wait for all Tx activity to terminate. */
--		/* Check port cause register that all Tx queues are stopped */
--		while (rdl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF)
--			udelay(PHY_WAIT_MICRO_SECONDS);
-+	if (pd->rx_queue_mask)
-+		mp->rxq_mask = pd->rx_queue_mask;
-+	else
-+		mp->rxq_mask = 0x01;
-+	mp->rxq_primary = fls(mp->rxq_mask) - 1;
- 
--		/* Wait for Tx FIFO to empty */
--		while (rdl(mp, PORT_STATUS_REG(port_num)) &
--							ETH_PORT_TX_FIFO_EMPTY)
--			udelay(PHY_WAIT_MICRO_SECONDS);
--	}
-+	mp->default_tx_ring_size = DEFAULT_TX_QUEUE_SIZE;
-+	if (pd->tx_queue_size)
-+		mp->default_tx_ring_size = pd->tx_queue_size;
-+	mp->tx_desc_sram_addr = pd->tx_sram_addr;
-+	mp->tx_desc_sram_size = pd->tx_sram_size;
- 
--	return queues;
-+	if (pd->tx_queue_mask)
-+		mp->txq_mask = pd->tx_queue_mask;
-+	else
-+		mp->txq_mask = 0x01;
-+	mp->txq_primary = fls(mp->txq_mask) - 1;
- }
- 
--static unsigned int mv643xx_eth_port_disable_rx(struct mv643xx_private *mp)
-+static int phy_detect(struct mv643xx_eth_private *mp)
- {
--	unsigned int port_num = mp->port_num;
--	u32 queues;
-+	unsigned int data;
-+	unsigned int data2;
- 
--	/* Stop Rx port activity. Check port Rx activity. */
--	queues = rdl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF;
--	if (queues) {
--		/* Issue stop command for active queues only */
--		wrl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num), (queues << 8));
-+	smi_reg_read(mp, mp->phy_addr, 0, &data);
-+	smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000);
- 
--		/* Wait for all Rx activity to terminate. */
--		/* Check port cause register that all Rx queues are stopped */
--		while (rdl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF)
--			udelay(PHY_WAIT_MICRO_SECONDS);
--	}
-+	smi_reg_read(mp, mp->phy_addr, 0, &data2);
-+	if (((data ^ data2) & 0x1000) == 0)
-+		return -ENODEV;
-+
-+	smi_reg_write(mp, mp->phy_addr, 0, data);
- 
--	return queues;
-+	return 0;
- }
- 
--/*
-- * eth_port_reset - Reset Ethernet port
-- *
-- * DESCRIPTION:
-- * 	This routine resets the chip by aborting any SDMA engine activity and
-- *	clearing the MIB counters. The Receiver and the Transmit unit are in
-- *	idle state after this command is performed and the port is disabled.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *
-- * OUTPUT:
-- *	Channel activity is halted.
-- *
-- * RETURN:
-- *	None.
-- *
-- */
--static void eth_port_reset(struct mv643xx_private *mp)
-+static int phy_init(struct mv643xx_eth_private *mp,
-+		    struct mv643xx_eth_platform_data *pd)
- {
--	unsigned int port_num = mp->port_num;
--	unsigned int reg_data;
--
--	mv643xx_eth_port_disable_tx(mp);
--	mv643xx_eth_port_disable_rx(mp);
--
--	/* Clear all MIB counters */
--	eth_clear_mib_counters(mp);
-+	struct ethtool_cmd cmd;
-+	int err;
- 
--	/* Reset the Enable bit in the Configuration Register */
--	reg_data = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
--	reg_data &= ~(SERIAL_PORT_ENABLE		|
--			DO_NOT_FORCE_LINK_FAIL	|
--			FORCE_LINK_PASS);
--	wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), reg_data);
--}
-+	err = phy_detect(mp);
-+	if (err) {
-+		dev_printk(KERN_INFO, &mp->dev->dev,
-+			   "no PHY detected at addr %d\n", mp->phy_addr);
-+		return err;
-+	}
-+	phy_reset(mp);
- 
-+	mp->mii.phy_id = mp->phy_addr;
-+	mp->mii.phy_id_mask = 0x3f;
-+	mp->mii.reg_num_mask = 0x1f;
-+	mp->mii.dev = mp->dev;
-+	mp->mii.mdio_read = mv643xx_eth_mdio_read;
-+	mp->mii.mdio_write = mv643xx_eth_mdio_write;
- 
--/*
-- * eth_port_read_smi_reg - Read PHY registers
-- *
-- * DESCRIPTION:
-- *	This routine utilize the SMI interface to interact with the PHY in
-- *	order to perform PHY register read.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *	unsigned int	phy_reg		PHY register address offset.
-- *	unsigned int	*value		Register value buffer.
-- *
-- * OUTPUT:
-- *	Write the value of a specified PHY register into given buffer.
-- *
-- * RETURN:
-- *	false if the PHY is busy or read data is not in valid state.
-- *	true otherwise.
-- *
-- */
--static void eth_port_read_smi_reg(struct mv643xx_private *mp,
--				unsigned int phy_reg, unsigned int *value)
--{
--	void __iomem *smi_reg = mp->shared_smi->eth_base + SMI_REG;
--	int phy_addr = ethernet_phy_get(mp);
--	unsigned long flags;
--	int i;
-+	mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
- 
--	/* the SMI register is a shared resource */
--	spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
-+	memset(&cmd, 0, sizeof(cmd));
- 
--	/* wait for the SMI register to become available */
--	for (i = 0; readl(smi_reg) & ETH_SMI_BUSY; i++) {
--		if (i == PHY_WAIT_ITERATIONS) {
--			printk("%s: PHY busy timeout\n", mp->dev->name);
--			goto out;
--		}
--		udelay(PHY_WAIT_MICRO_SECONDS);
-+	cmd.port = PORT_MII;
-+	cmd.transceiver = XCVR_INTERNAL;
-+	cmd.phy_address = mp->phy_addr;
-+	if (pd->speed == 0) {
-+		cmd.autoneg = AUTONEG_ENABLE;
-+		cmd.speed = SPEED_100;
-+		cmd.advertising = ADVERTISED_10baseT_Half  |
-+				  ADVERTISED_10baseT_Full  |
-+				  ADVERTISED_100baseT_Half |
-+				  ADVERTISED_100baseT_Full;
-+		if (mp->mii.supports_gmii)
-+			cmd.advertising |= ADVERTISED_1000baseT_Full;
-+	} else {
-+		cmd.autoneg = AUTONEG_DISABLE;
-+		cmd.speed = pd->speed;
-+		cmd.duplex = pd->duplex;
- 	}
- 
--	writel((phy_addr << 16) | (phy_reg << 21) | ETH_SMI_OPCODE_READ,
--		smi_reg);
--
--	/* now wait for the data to be valid */
--	for (i = 0; !(readl(smi_reg) & ETH_SMI_READ_VALID); i++) {
--		if (i == PHY_WAIT_ITERATIONS) {
--			printk("%s: PHY read timeout\n", mp->dev->name);
--			goto out;
--		}
--		udelay(PHY_WAIT_MICRO_SECONDS);
--	}
-+	update_pscr(mp, cmd.speed, cmd.duplex);
-+	mv643xx_eth_set_settings(mp->dev, &cmd);
- 
--	*value = readl(smi_reg) & 0xffff;
--out:
--	spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
-+	return 0;
- }
- 
--/*
-- * eth_port_write_smi_reg - Write to PHY registers
-- *
-- * DESCRIPTION:
-- *	This routine utilize the SMI interface to interact with the PHY in
-- *	order to perform writes to PHY registers.
-- *
-- * INPUT:
-- *	struct mv643xx_private *mp	Ethernet Port.
-- *	unsigned int	phy_reg		PHY register address offset.
-- *	unsigned int	value		Register value.
-- *
-- * OUTPUT:
-- *	Write the given value to the specified PHY register.
-- *
-- * RETURN:
-- *	false if the PHY is busy.
-- *	true otherwise.
-- *
-- */
--static void eth_port_write_smi_reg(struct mv643xx_private *mp,
--				   unsigned int phy_reg, unsigned int value)
-+static int mv643xx_eth_probe(struct platform_device *pdev)
- {
--	void __iomem *smi_reg = mp->shared_smi->eth_base + SMI_REG;
--	int phy_addr = ethernet_phy_get(mp);
--	unsigned long flags;
--	int i;
-+	struct mv643xx_eth_platform_data *pd;
-+	struct mv643xx_eth_private *mp;
-+	struct net_device *dev;
-+	struct resource *res;
-+	DECLARE_MAC_BUF(mac);
-+	int err;
- 
--	/* the SMI register is a shared resource */
--	spin_lock_irqsave(&mp->shared_smi->phy_lock, flags);
-+	pd = pdev->dev.platform_data;
-+	if (pd == NULL) {
-+		dev_printk(KERN_ERR, &pdev->dev,
-+			   "no mv643xx_eth_platform_data\n");
-+		return -ENODEV;
-+	}
- 
--	/* wait for the SMI register to become available */
--	for (i = 0; readl(smi_reg) & ETH_SMI_BUSY; i++) {
--		if (i == PHY_WAIT_ITERATIONS) {
--			printk("%s: PHY busy timeout\n", mp->dev->name);
--			goto out;
--		}
--		udelay(PHY_WAIT_MICRO_SECONDS);
-+	if (pd->shared == NULL) {
-+		dev_printk(KERN_ERR, &pdev->dev,
-+			   "no mv643xx_eth_platform_data->shared\n");
-+		return -ENODEV;
- 	}
- 
--	writel((phy_addr << 16) | (phy_reg << 21) |
--		ETH_SMI_OPCODE_WRITE | (value & 0xffff), smi_reg);
--out:
--	spin_unlock_irqrestore(&mp->shared_smi->phy_lock, flags);
--}
-+	dev = alloc_etherdev(sizeof(struct mv643xx_eth_private));
-+	if (!dev)
-+		return -ENOMEM;
- 
--/*
-- * Wrappers for MII support library.
-- */
--static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	int val;
-+	mp = netdev_priv(dev);
-+	platform_set_drvdata(pdev, mp);
- 
--	eth_port_read_smi_reg(mp, location, &val);
--	return val;
--}
-+	mp->shared = platform_get_drvdata(pd->shared);
-+	mp->port_num = pd->port_number;
- 
--static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
--	eth_port_write_smi_reg(mp, location, val);
--}
-+	mp->dev = dev;
-+#ifdef MV643XX_ETH_NAPI
-+	netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, 64);
-+#endif
- 
--/*
-- * eth_port_receive - Get received information from Rx ring.
-- *
-- * DESCRIPTION:
-- * 	This routine returns the received data to the caller. There is no
-- *	data copying during routine operation. All information is returned
-- *	using pointer to packet information struct passed from the caller.
-- *	If the routine exhausts Rx ring resources then the resource error flag
-- *	is set.
-- *
-- * INPUT:
-- *	struct mv643xx_private	*mp		Ethernet Port Control srtuct.
-- *	struct pkt_info		*p_pkt_info	User packet buffer.
-- *
-- * OUTPUT:
-- *	Rx ring current and used indexes are updated.
-- *
-- * RETURN:
-- *	ETH_ERROR in case the routine can not access Rx desc ring.
-- *	ETH_QUEUE_FULL if Rx ring resources are exhausted.
-- *	ETH_END_OF_JOB if there is no received data.
-- *	ETH_OK otherwise.
-- */
--static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
--						struct pkt_info *p_pkt_info)
--{
--	int rx_next_curr_desc, rx_curr_desc, rx_used_desc;
--	volatile struct eth_rx_desc *p_rx_desc;
--	unsigned int command_status;
--	unsigned long flags;
-+	set_params(mp, pd);
- 
--	/* Do not process Rx ring in case of Rx ring resource error */
--	if (mp->rx_resource_err)
--		return ETH_QUEUE_FULL;
-+	spin_lock_init(&mp->lock);
- 
--	spin_lock_irqsave(&mp->lock, flags);
-+	mib_counters_clear(mp);
-+	INIT_WORK(&mp->tx_timeout_task, tx_timeout_task);
- 
--	/* Get the Rx Desc ring 'curr and 'used' indexes */
--	rx_curr_desc = mp->rx_curr_desc_q;
--	rx_used_desc = mp->rx_used_desc_q;
--
--	p_rx_desc = &mp->p_rx_desc_area[rx_curr_desc];
--
--	/* The following parameters are used to save readings from memory */
--	command_status = p_rx_desc->cmd_sts;
--	rmb();
-+	if (mp->phy_addr != -1) {
-+		err = phy_init(mp, pd);
-+		if (err)
-+			goto out;
- 
--	/* Nothing to receive... */
--	if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
--		spin_unlock_irqrestore(&mp->lock, flags);
--		return ETH_END_OF_JOB;
-+		SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops);
-+	} else {
-+		SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless);
- 	}
- 
--	p_pkt_info->byte_cnt = (p_rx_desc->byte_cnt) - RX_BUF_OFFSET;
--	p_pkt_info->cmd_sts = command_status;
--	p_pkt_info->buf_ptr = (p_rx_desc->buf_ptr) + RX_BUF_OFFSET;
--	p_pkt_info->return_info = mp->rx_skb[rx_curr_desc];
--	p_pkt_info->l4i_chk = p_rx_desc->buf_size;
--
--	/*
--	 * Clean the return info field to indicate that the
--	 * packet has been moved to the upper layers
--	 */
--	mp->rx_skb[rx_curr_desc] = NULL;
- 
--	/* Update current index in data structure */
--	rx_next_curr_desc = (rx_curr_desc + 1) % mp->rx_ring_size;
--	mp->rx_curr_desc_q = rx_next_curr_desc;
-+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+	BUG_ON(!res);
-+	dev->irq = res->start;
- 
--	/* Rx descriptors exhausted. Set the Rx ring resource error flag */
--	if (rx_next_curr_desc == rx_used_desc)
--		mp->rx_resource_err = 1;
-+	dev->hard_start_xmit = mv643xx_eth_xmit;
-+	dev->open = mv643xx_eth_open;
-+	dev->stop = mv643xx_eth_stop;
-+	dev->set_multicast_list = mv643xx_eth_set_rx_mode;
-+	dev->set_mac_address = mv643xx_eth_set_mac_address;
-+	dev->do_ioctl = mv643xx_eth_ioctl;
-+	dev->change_mtu = mv643xx_eth_change_mtu;
-+	dev->tx_timeout = mv643xx_eth_tx_timeout;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	dev->poll_controller = mv643xx_eth_netpoll;
-+#endif
-+	dev->watchdog_timeo = 2 * HZ;
-+	dev->base_addr = 0;
- 
--	spin_unlock_irqrestore(&mp->lock, flags);
-+#ifdef MV643XX_ETH_CHECKSUM_OFFLOAD_TX
-+	/*
-+	 * Zero copy can only work if we use Discovery II memory. Else, we will
-+	 * have to map the buffers to ISA memory which is only 16 MB
-+	 */
-+	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
-+#endif
- 
--	return ETH_OK;
--}
-+	SET_NETDEV_DEV(dev, &pdev->dev);
- 
--/*
-- * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
-- *
-- * DESCRIPTION:
-- *	This routine returns a Rx buffer back to the Rx ring. It retrieves the
-- *	next 'used' descriptor and attached the returned buffer to it.
-- *	In case the Rx ring was in "resource error" condition, where there are
-- *	no available Rx resources, the function resets the resource error flag.
-- *
-- * INPUT:
-- *	struct mv643xx_private	*mp		Ethernet Port Control srtuct.
-- *	struct pkt_info		*p_pkt_info	Information on returned buffer.
-- *
-- * OUTPUT:
-- *	New available Rx resource in Rx descriptor ring.
-- *
-- * RETURN:
-- *	ETH_ERROR in case the routine can not access Rx desc ring.
-- *	ETH_OK otherwise.
-- */
--static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
--						struct pkt_info *p_pkt_info)
--{
--	int used_rx_desc;	/* Where to return Rx resource */
--	volatile struct eth_rx_desc *p_used_rx_desc;
--	unsigned long flags;
-+	if (mp->shared->win_protect)
-+		wrl(mp, WINDOW_PROTECT(mp->port_num), mp->shared->win_protect);
- 
--	spin_lock_irqsave(&mp->lock, flags);
-+	err = register_netdev(dev);
-+	if (err)
-+		goto out;
- 
--	/* Get 'used' Rx descriptor */
--	used_rx_desc = mp->rx_used_desc_q;
--	p_used_rx_desc = &mp->p_rx_desc_area[used_rx_desc];
-+	dev_printk(KERN_NOTICE, &dev->dev, "port %d with MAC address %s\n",
-+		   mp->port_num, print_mac(mac, dev->dev_addr));
- 
--	p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
--	p_used_rx_desc->buf_size = p_pkt_info->byte_cnt;
--	mp->rx_skb[used_rx_desc] = p_pkt_info->return_info;
-+	if (dev->features & NETIF_F_SG)
-+		dev_printk(KERN_NOTICE, &dev->dev, "scatter/gather enabled\n");
- 
--	/* Flush the write pipe */
-+	if (dev->features & NETIF_F_IP_CSUM)
-+		dev_printk(KERN_NOTICE, &dev->dev, "tx checksum offload\n");
- 
--	/* Return the descriptor to DMA ownership */
--	wmb();
--	p_used_rx_desc->cmd_sts =
--			ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
--	wmb();
-+#ifdef MV643XX_ETH_NAPI
-+	dev_printk(KERN_NOTICE, &dev->dev, "napi enabled\n");
-+#endif
- 
--	/* Move the used descriptor pointer to the next descriptor */
--	mp->rx_used_desc_q = (used_rx_desc + 1) % mp->rx_ring_size;
-+	if (mp->tx_desc_sram_size > 0)
-+		dev_printk(KERN_NOTICE, &dev->dev, "configured with sram\n");
- 
--	/* Any Rx return cancels the Rx resource error status */
--	mp->rx_resource_err = 0;
-+	return 0;
- 
--	spin_unlock_irqrestore(&mp->lock, flags);
-+out:
-+	free_netdev(dev);
- 
--	return ETH_OK;
-+	return err;
- }
- 
--/************* Begin ethtool support *************************/
--
--struct mv643xx_stats {
--	char stat_string[ETH_GSTRING_LEN];
--	int sizeof_stat;
--	int stat_offset;
--};
--
--#define MV643XX_STAT(m) FIELD_SIZEOF(struct mv643xx_private, m), \
--					offsetof(struct mv643xx_private, m)
--
--static const struct mv643xx_stats mv643xx_gstrings_stats[] = {
--	{ "rx_packets", MV643XX_STAT(stats.rx_packets) },
--	{ "tx_packets", MV643XX_STAT(stats.tx_packets) },
--	{ "rx_bytes", MV643XX_STAT(stats.rx_bytes) },
--	{ "tx_bytes", MV643XX_STAT(stats.tx_bytes) },
--	{ "rx_errors", MV643XX_STAT(stats.rx_errors) },
--	{ "tx_errors", MV643XX_STAT(stats.tx_errors) },
--	{ "rx_dropped", MV643XX_STAT(stats.rx_dropped) },
--	{ "tx_dropped", MV643XX_STAT(stats.tx_dropped) },
--	{ "good_octets_received", MV643XX_STAT(mib_counters.good_octets_received) },
--	{ "bad_octets_received", MV643XX_STAT(mib_counters.bad_octets_received) },
--	{ "internal_mac_transmit_err", MV643XX_STAT(mib_counters.internal_mac_transmit_err) },
--	{ "good_frames_received", MV643XX_STAT(mib_counters.good_frames_received) },
--	{ "bad_frames_received", MV643XX_STAT(mib_counters.bad_frames_received) },
--	{ "broadcast_frames_received", MV643XX_STAT(mib_counters.broadcast_frames_received) },
--	{ "multicast_frames_received", MV643XX_STAT(mib_counters.multicast_frames_received) },
--	{ "frames_64_octets", MV643XX_STAT(mib_counters.frames_64_octets) },
--	{ "frames_65_to_127_octets", MV643XX_STAT(mib_counters.frames_65_to_127_octets) },
--	{ "frames_128_to_255_octets", MV643XX_STAT(mib_counters.frames_128_to_255_octets) },
--	{ "frames_256_to_511_octets", MV643XX_STAT(mib_counters.frames_256_to_511_octets) },
--	{ "frames_512_to_1023_octets", MV643XX_STAT(mib_counters.frames_512_to_1023_octets) },
--	{ "frames_1024_to_max_octets", MV643XX_STAT(mib_counters.frames_1024_to_max_octets) },
--	{ "good_octets_sent", MV643XX_STAT(mib_counters.good_octets_sent) },
--	{ "good_frames_sent", MV643XX_STAT(mib_counters.good_frames_sent) },
--	{ "excessive_collision", MV643XX_STAT(mib_counters.excessive_collision) },
--	{ "multicast_frames_sent", MV643XX_STAT(mib_counters.multicast_frames_sent) },
--	{ "broadcast_frames_sent", MV643XX_STAT(mib_counters.broadcast_frames_sent) },
--	{ "unrec_mac_control_received", MV643XX_STAT(mib_counters.unrec_mac_control_received) },
--	{ "fc_sent", MV643XX_STAT(mib_counters.fc_sent) },
--	{ "good_fc_received", MV643XX_STAT(mib_counters.good_fc_received) },
--	{ "bad_fc_received", MV643XX_STAT(mib_counters.bad_fc_received) },
--	{ "undersize_received", MV643XX_STAT(mib_counters.undersize_received) },
--	{ "fragments_received", MV643XX_STAT(mib_counters.fragments_received) },
--	{ "oversize_received", MV643XX_STAT(mib_counters.oversize_received) },
--	{ "jabber_received", MV643XX_STAT(mib_counters.jabber_received) },
--	{ "mac_receive_error", MV643XX_STAT(mib_counters.mac_receive_error) },
--	{ "bad_crc_event", MV643XX_STAT(mib_counters.bad_crc_event) },
--	{ "collision", MV643XX_STAT(mib_counters.collision) },
--	{ "late_collision", MV643XX_STAT(mib_counters.late_collision) },
--};
-+static int mv643xx_eth_remove(struct platform_device *pdev)
-+{
-+	struct mv643xx_eth_private *mp = platform_get_drvdata(pdev);
- 
--#define MV643XX_STATS_LEN	ARRAY_SIZE(mv643xx_gstrings_stats)
-+	unregister_netdev(mp->dev);
-+	flush_scheduled_work();
-+	free_netdev(mp->dev);
- 
--static void mv643xx_get_drvinfo(struct net_device *netdev,
--				struct ethtool_drvinfo *drvinfo)
--{
--	strncpy(drvinfo->driver,  mv643xx_driver_name, 32);
--	strncpy(drvinfo->version, mv643xx_driver_version, 32);
--	strncpy(drvinfo->fw_version, "N/A", 32);
--	strncpy(drvinfo->bus_info, "mv643xx", 32);
--	drvinfo->n_stats = MV643XX_STATS_LEN;
--}
-+	platform_set_drvdata(pdev, NULL);
- 
--static int mv643xx_get_sset_count(struct net_device *netdev, int sset)
--{
--	switch (sset) {
--	case ETH_SS_STATS:
--		return MV643XX_STATS_LEN;
--	default:
--		return -EOPNOTSUPP;
--	}
-+	return 0;
- }
- 
--static void mv643xx_get_ethtool_stats(struct net_device *netdev,
--				struct ethtool_stats *stats, uint64_t *data)
-+static void mv643xx_eth_shutdown(struct platform_device *pdev)
- {
--	struct mv643xx_private *mp = netdev->priv;
--	int i;
-+	struct mv643xx_eth_private *mp = platform_get_drvdata(pdev);
- 
--	eth_update_mib_counters(mp);
-+	/* Mask all interrupts on ethernet port */
-+	wrl(mp, INT_MASK(mp->port_num), 0);
-+	rdl(mp, INT_MASK(mp->port_num));
- 
--	for (i = 0; i < MV643XX_STATS_LEN; i++) {
--		char *p = (char *)mp+mv643xx_gstrings_stats[i].stat_offset;
--		data[i] = (mv643xx_gstrings_stats[i].sizeof_stat ==
--			sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
--	}
-+	if (netif_running(mp->dev))
-+		port_reset(mp);
- }
- 
--static void mv643xx_get_strings(struct net_device *netdev, uint32_t stringset,
--				uint8_t *data)
--{
--	int i;
--
--	switch(stringset) {
--	case ETH_SS_STATS:
--		for (i=0; i < MV643XX_STATS_LEN; i++) {
--			memcpy(data + i * ETH_GSTRING_LEN,
--					mv643xx_gstrings_stats[i].stat_string,
--					ETH_GSTRING_LEN);
--		}
--		break;
--	}
--}
-+static struct platform_driver mv643xx_eth_driver = {
-+	.probe		= mv643xx_eth_probe,
-+	.remove		= mv643xx_eth_remove,
-+	.shutdown	= mv643xx_eth_shutdown,
-+	.driver = {
-+		.name	= MV643XX_ETH_NAME,
-+		.owner	= THIS_MODULE,
-+	},
-+};
- 
--static u32 mv643xx_eth_get_link(struct net_device *dev)
-+static int __init mv643xx_eth_init_module(void)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--
--	return mii_link_ok(&mp->mii);
--}
-+	int rc;
- 
--static int mv643xx_eth_nway_restart(struct net_device *dev)
--{
--	struct mv643xx_private *mp = netdev_priv(dev);
-+	rc = platform_driver_register(&mv643xx_eth_shared_driver);
-+	if (!rc) {
-+		rc = platform_driver_register(&mv643xx_eth_driver);
-+		if (rc)
-+			platform_driver_unregister(&mv643xx_eth_shared_driver);
-+	}
- 
--	return mii_nway_restart(&mp->mii);
-+	return rc;
- }
-+module_init(mv643xx_eth_init_module);
- 
--static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+static void __exit mv643xx_eth_cleanup_module(void)
- {
--	struct mv643xx_private *mp = netdev_priv(dev);
--
--	return generic_mii_ioctl(&mp->mii, if_mii(ifr), cmd, NULL);
-+	platform_driver_unregister(&mv643xx_eth_driver);
-+	platform_driver_unregister(&mv643xx_eth_shared_driver);
- }
-+module_exit(mv643xx_eth_cleanup_module);
- 
--static const struct ethtool_ops mv643xx_ethtool_ops = {
--	.get_settings           = mv643xx_get_settings,
--	.set_settings           = mv643xx_set_settings,
--	.get_drvinfo            = mv643xx_get_drvinfo,
--	.get_link               = mv643xx_eth_get_link,
--	.set_sg			= ethtool_op_set_sg,
--	.get_sset_count		= mv643xx_get_sset_count,
--	.get_ethtool_stats      = mv643xx_get_ethtool_stats,
--	.get_strings            = mv643xx_get_strings,
--	.nway_reset		= mv643xx_eth_nway_restart,
--};
--
--/************* End ethtool support *************************/
-+MODULE_AUTHOR("Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, "
-+	      "Manish Lachwani, Dale Farnsworth and Lennert Buytenhek");
-+MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:" MV643XX_ETH_SHARED_NAME);
-+MODULE_ALIAS("platform:" MV643XX_ETH_NAME);
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/debug-macro.S
-@@ -0,0 +1,20 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/debug-macro.S
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+*/
-+
-+#include <asm/arch/kirkwood.h>
-+
-+	.macro	addruart,rx
-+	mrc	p15, 0, \rx, c1, c0
-+	tst	\rx, #1					@ MMU enabled?
-+	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-+	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-+	orr	\rx, \rx, #0x00012000
-+	.endm
-+
-+#define UART_SHIFT	2
-+#include <asm/hardware/debug-8250.S>
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/dma.h
-@@ -0,0 +1 @@
-+/* empty */
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/entry-macro.S
-@@ -0,0 +1,40 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <asm/arch/kirkwood.h>
-+
-+	.macro  disable_fiq
-+	.endm
-+
-+	.macro  arch_ret_to_user, tmp1, tmp2
-+	.endm
-+
-+	.macro  get_irqnr_preamble, base, tmp
-+	ldr	\base, =IRQ_VIRT_BASE
-+	.endm
-+
-+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-+	@ check low interrupts
-+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-+	mov	\irqnr, #31
-+	ands	\irqstat, \irqstat, \tmp
-+	bne	1001f
-+
-+	@ if no low interrupts set, check high interrupts
-+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-+	mov	\irqnr, #63
-+	ands	\irqstat, \irqstat, \tmp
-+
-+	@ find first active interrupt source
-+1001:	clzne	\irqstat, \irqstat
-+	subne	\irqnr, \irqnr, \irqstat
-+	.endm
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/hardware.h
-@@ -0,0 +1,21 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/hardware.h
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include "kirkwood.h"
-+
-+#define pcibios_assign_all_busses()	1
-+
-+#define PCIBIOS_MIN_IO			0x00001000
-+#define PCIBIOS_MIN_MEM			0x01000000
-+#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/io.h
-@@ -0,0 +1,26 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/io.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_IO_H
-+#define __ASM_ARCH_IO_H
-+
-+#include "kirkwood.h"
-+
-+#define IO_SPACE_LIMIT		0xffffffff
-+
-+static inline void __iomem *__io(unsigned long addr)
-+{
-+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
-+					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
-+}
-+
-+#define __io(a)			__io(a)
-+#define __mem_pci(a)		(a)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/irqs.h
-@@ -0,0 +1,63 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/irqs.h
-+ *
-+ * IRQ definitions for Marvell Kirkwood SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_IRQS_H
-+#define __ASM_ARCH_IRQS_H
-+
-+#include "kirkwood.h"	/* need GPIO_MAX */
-+
-+/*
-+ * Low Interrupt Controller
-+ */
-+#define IRQ_KIRKWOOD_HIGH_SUM	0
-+#define IRQ_KIRKWOOD_BRIDGE	1
-+#define IRQ_KIRKWOOD_HOST2CPU	2
-+#define IRQ_KIRKWOOD_CPU2HOST	3
-+#define IRQ_KIRKWOOD_XOR_00	5
-+#define IRQ_KIRKWOOD_XOR_01	6
-+#define IRQ_KIRKWOOD_XOR_10	7
-+#define IRQ_KIRKWOOD_XOR_11	8
-+#define IRQ_KIRKWOOD_PCIE	9
-+#define IRQ_KIRKWOOD_GE00_SUM	11
-+#define IRQ_KIRKWOOD_GE01_SUM	15
-+#define IRQ_KIRKWOOD_USB	19
-+#define IRQ_KIRKWOOD_SATA	21
-+#define IRQ_KIRKWOOD_CRYPTO	22
-+#define IRQ_KIRKWOOD_SPI	23
-+#define IRQ_KIRKWOOD_I2S	24
-+#define IRQ_KIRKWOOD_TS_0	26
-+#define IRQ_KIRKWOOD_SDIO	28
-+#define IRQ_KIRKWOOD_TWSI	29
-+#define IRQ_KIRKWOOD_AVB	30
-+#define IRQ_KIRKWOOD_TDMI	31
-+
-+/*
-+ * High Interrupt Controller
-+ */
-+#define IRQ_KIRKWOOD_UART_0	33
-+#define IRQ_KIRKWOOD_UART_1	34
-+#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
-+#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
-+#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
-+#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
-+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
-+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
-+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
-+
-+/*
-+ * KIRKWOOD General Purpose Pins
-+ */
-+#define IRQ_KIRKWOOD_GPIO_START	64
-+#define NR_GPIO_IRQS		GPIO_MAX
-+
-+#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
-@@ -0,0 +1,99 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/kirkwood.h
-+ *
-+ * Generic definitions for Marvell Kirkwood SoC flavors:
-+ *  88F6180, 88F6192 and 88F6281.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_KIRKWOOD_H
-+#define __ASM_ARCH_KIRKWOOD_H
-+
-+/*
-+ * Marvell Kirkwood address maps.
-+ *
-+ * phys
-+ * e0000000	PCIe Memory space
-+ * f1000000	on-chip peripheral registers
-+ * f2000000	PCIe I/O space
-+ * f3000000	NAND controller address window
-+ *
-+ * virt		phys		size
-+ * fee00000	f1000000	1M	on-chip peripheral registers
-+ * fef00000	f2000000	1M	PCIe I/O space
-+ */
-+
-+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-+#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-+						* is the minimal window size
-+						*/
-+
-+#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
-+#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
-+#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
-+
-+#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-+#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
-+#define KIRKWOOD_REGS_SIZE		SZ_1M
-+
-+#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
-+#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
-+
-+/*
-+ * MBUS bridge registers.
-+ */
-+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-+#define   CPU_RESET		0x00000002
-+//#define   L2_WRITETHROUGH	0x00020000
-+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-+#define   SOFT_RESET_OUT_EN	0x00000004
-+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-+#define   SOFT_RESET		0x00000001
-+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-+#define   BRIDGE_INT_TIMER0	0x0002
-+#define   BRIDGE_INT_TIMER1	0x0004
-+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-+#define   IRQ_CAUSE_LOW_OFF	0x0000
-+#define   IRQ_MASK_LOW_OFF	0x0004
-+#define   IRQ_CAUSE_HIGH_OFF	0x0010
-+#define   IRQ_MASK_HIGH_OFF	0x0014
-+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-+
-+/*
-+ * Register Map
-+ */
-+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-+
-+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-+
-+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-+
-+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-+
-+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-+
-+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-+
-+
-+#define GPIO_MAX		50
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/memory.h
-@@ -0,0 +1,14 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/memory.h
-+ */
-+
-+#ifndef __ASM_ARCH_MEMORY_H
-+#define __ASM_ARCH_MEMORY_H
-+
-+#define PHYS_OFFSET		UL(0x00000000)
-+
-+#define __virt_to_bus(x)	__virt_to_phys(x)
-+#define __bus_to_virt(x)	__phys_to_virt(x)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/system.h
-@@ -0,0 +1,37 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/system.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/kirkwood.h>
-+
-+static inline void arch_idle(void)
-+{
-+	cpu_do_idle();
-+}
-+
-+static inline void arch_reset(char mode)
-+{
-+	/*
-+	 * Enable soft reset to assert RSTOUTn.
-+	 */
-+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-+
-+	/*
-+	 * Assert soft reset.
-+	 */
-+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-+
-+	while (1)
-+		;
-+}
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/timex.h
-@@ -0,0 +1,11 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/timex.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#define CLOCK_TICK_RATE		(100 * HZ)
-+
-+#define KIRKWOOD_TCLK		166666667
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/uncompress.h
-@@ -0,0 +1,47 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/uncompress.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/serial_reg.h>
-+#include <asm/arch/kirkwood.h>
-+
-+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-+
-+static void putc(const char c)
-+{
-+	unsigned char *base = SERIAL_BASE;
-+	int i;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if (base[UART_LSR << 2] & UART_LSR_THRE)
-+			break;
-+		barrier();
-+	}
-+
-+	base[UART_TX << 2] = c;
-+}
-+
-+static void flush(void)
-+{
-+	unsigned char *base = SERIAL_BASE;
-+	unsigned char mask;
-+	int i;
-+
-+	mask = UART_LSR_TEMT | UART_LSR_THRE;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if ((base[UART_LSR << 2] & mask) == mask)
-+			break;
-+		barrier();
-+	}
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_setup()
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/include/asm-arm/arch-kirkwood/vmalloc.h
-@@ -0,0 +1,5 @@
-+/*
-+ * include/asm-arm/arch-kirkwood/vmalloc.h
-+ */
-+
-+#define VMALLOC_END	0xfe800000
---- /dev/null
-+++ b/include/asm-arm/arch-loki/debug-macro.S
-@@ -0,0 +1,20 @@
-+/*
-+ * include/asm-arm/arch-loki/debug-macro.S
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+*/
-+
-+#include <asm/arch/loki.h>
-+
-+	.macro	addruart,rx
-+	mrc	p15, 0, \rx, c1, c0
-+	tst	\rx, #1					@ MMU enabled?
-+	ldreq	\rx, =LOKI_REGS_PHYS_BASE
-+	ldrne	\rx, =LOKI_REGS_VIRT_BASE
-+	orr	\rx, \rx, #0x00012000
-+	.endm
-+
-+#define UART_SHIFT	2
-+#include <asm/hardware/debug-8250.S>
---- /dev/null
-+++ b/include/asm-arm/arch-loki/dma.h
-@@ -0,0 +1 @@
-+/* empty */
---- /dev/null
-+++ b/include/asm-arm/arch-loki/entry-macro.S
-@@ -0,0 +1,30 @@
-+/*
-+ * include/asm-arm/arch-loki/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <asm/arch/loki.h>
-+
-+	.macro  disable_fiq
-+	.endm
-+
-+	.macro  arch_ret_to_user, tmp1, tmp2
-+	.endm
-+
-+	.macro  get_irqnr_preamble, base, tmp
-+	ldr	\base, =IRQ_VIRT_BASE
-+	.endm
-+
-+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-+	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
-+	ldr	\tmp, [\base, #IRQ_MASK_OFF]
-+	mov	\irqnr, #0
-+	ands	\irqstat, \irqstat, \tmp
-+	clzne	\irqnr, \irqstat
-+	rsbne	\irqnr, \irqnr, #31
-+	.endm
---- /dev/null
-+++ b/include/asm-arm/arch-loki/hardware.h
-@@ -0,0 +1,15 @@
-+/*
-+ * include/asm-arm/arch-loki/hardware.h
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include "loki.h"
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-loki/io.h
-@@ -0,0 +1,26 @@
-+/*
-+ * include/asm-arm/arch-loki/io.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_IO_H
-+#define __ASM_ARCH_IO_H
-+
-+#include "loki.h"
-+
-+#define IO_SPACE_LIMIT		0xffffffff
-+
-+static inline void __iomem *__io(unsigned long addr)
-+{
-+	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
-+					+ LOKI_PCIE0_IO_VIRT_BASE);
-+}
-+
-+#define __io(a)			__io(a)
-+#define __mem_pci(a)		(a)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-loki/irqs.h
-@@ -0,0 +1,58 @@
-+/*
-+ * include/asm-arm/arch-loki/irqs.h
-+ *
-+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_IRQS_H
-+#define __ASM_ARCH_IRQS_H
-+
-+#include "loki.h"	/* need GPIO_MAX */
-+
-+/*
-+ * Interrupt Controller
-+ */
-+#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
-+#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
-+#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
-+#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
-+#define IRQ_LOKI_COM_A_ERR		6
-+#define IRQ_LOKI_COM_A_IN		7
-+#define IRQ_LOKI_COM_A_OUT		8
-+#define IRQ_LOKI_COM_B_ERR		9
-+#define IRQ_LOKI_COM_B_IN		10
-+#define IRQ_LOKI_COM_B_OUT		11
-+#define IRQ_LOKI_DMA_A			12
-+#define IRQ_LOKI_DMA_B			13
-+#define IRQ_LOKI_SAS_A			14
-+#define IRQ_LOKI_SAS_B			15
-+#define IRQ_LOKI_DDR			16
-+#define IRQ_LOKI_XOR			17
-+#define IRQ_LOKI_BRIDGE			18
-+#define IRQ_LOKI_PCIE_A_ERR		20
-+#define IRQ_LOKI_PCIE_A_INT		21
-+#define IRQ_LOKI_PCIE_B_ERR		22
-+#define IRQ_LOKI_PCIE_B_INT		23
-+#define IRQ_LOKI_GBE_A_INT		24
-+#define IRQ_LOKI_GBE_B_INT		25
-+#define IRQ_LOKI_DEV_ERR		26
-+#define IRQ_LOKI_UART0			27
-+#define IRQ_LOKI_UART1			28
-+#define IRQ_LOKI_TWSI			29
-+#define IRQ_LOKI_GPIO_23_0		30
-+#define IRQ_LOKI_GPIO_25_24		31
-+
-+/*
-+ * Loki General Purpose Pins
-+ */
-+#define IRQ_LOKI_GPIO_START	32
-+#define NR_GPIO_IRQS		GPIO_MAX
-+
-+#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-loki/loki.h
-@@ -0,0 +1,97 @@
-+/*
-+ * include/asm-arm/arch-loki/loki.h
-+ *
-+ * Generic definitions for Marvell Loki (88RC8480) SoC flavors
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_LOKI_H
-+#define __ASM_ARCH_LOKI_H
-+
-+/*
-+ * Marvell Loki (88RC8480) address maps.
-+ *
-+ * phys
-+ * d0000000	on-chip peripheral registers
-+ * e0000000	PCIe 0 Memory space
-+ * e8000000	PCIe 1 Memory space
-+ * f0000000	PCIe 0 I/O space
-+ * f0100000	PCIe 1 I/O space
-+ *
-+ * virt		phys		size
-+ * fed00000	d0000000	1M	on-chip peripheral registers
-+ * fee00000	f0000000	64K	PCIe 0 I/O space
-+ * fef00000	f0100000	64K	PCIe 1 I/O space
-+ */
-+
-+#define LOKI_REGS_PHYS_BASE		0xd0000000
-+#define LOKI_REGS_VIRT_BASE		0xfed00000
-+#define LOKI_REGS_SIZE			SZ_1M
-+
-+#define LOKI_PCIE0_IO_PHYS_BASE		0xf0000000
-+#define LOKI_PCIE0_IO_VIRT_BASE		0xfee00000
-+#define LOKI_PCIE0_IO_BUS_BASE		0x00000000
-+#define LOKI_PCIE0_IO_SIZE		SZ_64K
-+
-+#define LOKI_PCIE1_IO_PHYS_BASE		0xf0100000
-+#define LOKI_PCIE1_IO_VIRT_BASE		0xfef00000
-+#define LOKI_PCIE1_IO_BUS_BASE		0x00000000
-+#define LOKI_PCIE1_IO_SIZE		SZ_64K
-+
-+#define LOKI_PCIE0_MEM_PHYS_BASE	0xe0000000
-+#define LOKI_PCIE0_MEM_SIZE		SZ_128M
-+
-+#define LOKI_PCIE1_MEM_PHYS_BASE	0xe8000000
-+#define LOKI_PCIE1_MEM_SIZE		SZ_128M
-+
-+/*
-+ * Register Map
-+ */
-+#define DEV_BUS_PHYS_BASE	(LOKI_REGS_PHYS_BASE | 0x10000)
-+#define DEV_BUS_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x10000)
-+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-+
-+#define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
-+#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
-+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-+#define   SOFT_RESET_OUT_EN	0x00000004
-+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-+#define   SOFT_RESET		0x00000001
-+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-+#define   BRIDGE_INT_TIMER0	0x0002
-+#define   BRIDGE_INT_TIMER1	0x0004
-+#define   BRIDGE_INT_TIMER1_CLR	0x0004
-+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-+#define   IRQ_CAUSE_OFF		0x0000
-+#define   IRQ_MASK_OFF		0x0004
-+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-+
-+#define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
-+
-+#define PCIE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x40000)
-+
-+#define SAS0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x80000)
-+
-+#define SAS1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x90000)
-+
-+#define GE0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xa0000)
-+#define GE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xa0000)
-+
-+#define GE1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xb0000)
-+#define GE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xb0000)
-+
-+#define DDR_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xf0000)
-+#define DDR_REG(x)		(DDR_VIRT_BASE | (x))
-+
-+
-+#define GPIO_MAX		8
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-loki/memory.h
-@@ -0,0 +1,14 @@
-+/*
-+ * include/asm-arm/arch-loki/memory.h
-+ */
-+
-+#ifndef __ASM_ARCH_MEMORY_H
-+#define __ASM_ARCH_MEMORY_H
-+
-+#define PHYS_OFFSET		UL(0x00000000)
-+
-+#define __virt_to_bus(x)	__virt_to_phys(x)
-+#define __bus_to_virt(x)	__phys_to_virt(x)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-loki/system.h
-@@ -0,0 +1,37 @@
-+/*
-+ * include/asm-arm/arch-loki/system.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/loki.h>
-+
-+static inline void arch_idle(void)
-+{
-+	cpu_do_idle();
-+}
-+
-+static inline void arch_reset(char mode)
-+{
-+	/*
-+	 * Enable soft reset to assert RSTOUTn.
-+	 */
-+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-+
-+	/*
-+	 * Assert soft reset.
-+	 */
-+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-+
-+	while (1)
-+		;
-+}
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-loki/timex.h
-@@ -0,0 +1,11 @@
-+/*
-+ * include/asm-arm/arch-loki/timex.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#define CLOCK_TICK_RATE		(100 * HZ)
-+
-+#define LOKI_TCLK		180000000
---- /dev/null
-+++ b/include/asm-arm/arch-loki/uncompress.h
-@@ -0,0 +1,47 @@
-+/*
-+ * include/asm-arm/arch-loki/uncompress.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/serial_reg.h>
-+#include <asm/arch/loki.h>
-+
-+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-+
-+static void putc(const char c)
-+{
-+	unsigned char *base = SERIAL_BASE;
-+	int i;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if (base[UART_LSR << 2] & UART_LSR_THRE)
-+			break;
-+		barrier();
-+	}
-+
-+	base[UART_TX << 2] = c;
-+}
-+
-+static void flush(void)
-+{
-+	unsigned char *base = SERIAL_BASE;
-+	unsigned char mask;
-+	int i;
-+
-+	mask = UART_LSR_TEMT | UART_LSR_THRE;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if ((base[UART_LSR << 2] & mask) == mask)
-+			break;
-+		barrier();
-+	}
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_setup()
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/include/asm-arm/arch-loki/vmalloc.h
-@@ -0,0 +1,5 @@
-+/*
-+ * include/asm-arm/arch-loki/vmalloc.h
-+ */
-+
-+#define VMALLOC_END	0xfe800000
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/debug-macro.S
-@@ -0,0 +1,20 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/debug-macro.S
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+*/
-+
-+#include <asm/arch/mv78xx0.h>
-+
-+	.macro	addruart,rx
-+	mrc	p15, 0, \rx, c1, c0
-+	tst	\rx, #1					@ MMU enabled?
-+	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
-+	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
-+	orr	\rx, \rx, #0x00012000
-+	.endm
-+
-+#define UART_SHIFT	2
-+#include <asm/hardware/debug-8250.S>
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/dma.h
-@@ -0,0 +1 @@
-+/* empty */
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/entry-macro.S
-@@ -0,0 +1,39 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <asm/arch/mv78xx0.h>
-+
-+	.macro  disable_fiq
-+	.endm
-+
-+	.macro  arch_ret_to_user, tmp1, tmp2
-+	.endm
-+
-+	.macro  get_irqnr_preamble, base, tmp
-+	ldr	\base, =IRQ_VIRT_BASE
-+	.endm
-+
-+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-+	@ check low interrupts
-+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-+	mov	\irqnr, #31
-+	ands	\irqstat, \irqstat, \tmp
-+
-+	@ if no low interrupts set, check high interrupts
-+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-+	moveq	\irqnr, #63
-+	andeqs	\irqstat, \irqstat, \tmp
-+
-+	@ find first active interrupt source
-+	clzne	\irqstat, \irqstat
-+	subne	\irqnr, \irqnr, \irqstat
-+	.endm
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/hardware.h
-@@ -0,0 +1,21 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/hardware.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include "mv78xx0.h"
-+
-+#define pcibios_assign_all_busses()	1
-+
-+#define PCIBIOS_MIN_IO			0x00001000
-+#define PCIBIOS_MIN_MEM			0x01000000
-+#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/io.h
-@@ -0,0 +1,26 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/io.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_IO_H
-+#define __ASM_ARCH_IO_H
-+
-+#include "mv78xx0.h"
-+
-+#define IO_SPACE_LIMIT		0xffffffff
-+
-+static inline void __iomem *__io(unsigned long addr)
-+{
-+	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
-+					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
-+}
-+
-+#define __io(a)			__io(a)
-+#define __mem_pci(a)		(a)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/irqs.h
-@@ -0,0 +1,91 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/irqs.h
-+ *
-+ * IRQ definitions for Marvell MV78xx0 SoCs
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_IRQS_H
-+#define __ASM_ARCH_IRQS_H
-+
-+#include "mv78xx0.h"	/* need GPIO_MAX */
-+
-+/*
-+ * MV78xx0 Low Interrupt Controller
-+ */
-+#define IRQ_MV78XX0_ERR		0
-+#define IRQ_MV78XX0_SPI		1
-+#define IRQ_MV78XX0_I2C_0	2
-+#define IRQ_MV78XX0_I2C_1	3
-+#define IRQ_MV78XX0_IDMA_0	4
-+#define IRQ_MV78XX0_IDMA_1	5
-+#define IRQ_MV78XX0_IDMA_2	6
-+#define IRQ_MV78XX0_IDMA_3	7
-+#define IRQ_MV78XX0_TIMER_0	8
-+#define IRQ_MV78XX0_TIMER_1	9
-+#define IRQ_MV78XX0_TIMER_2	10
-+#define IRQ_MV78XX0_TIMER_3	11
-+#define IRQ_MV78XX0_UART_0	12
-+#define IRQ_MV78XX0_UART_1	13
-+#define IRQ_MV78XX0_UART_2	14
-+#define IRQ_MV78XX0_UART_3	15
-+#define IRQ_MV78XX0_USB_0	16
-+#define IRQ_MV78XX0_USB_1	17
-+#define IRQ_MV78XX0_USB_2	18
-+#define IRQ_MV78XX0_CRYPTO	19
-+#define IRQ_MV78XX0_SDIO_0	20
-+#define IRQ_MV78XX0_SDIO_1	21
-+#define IRQ_MV78XX0_XOR_0	22
-+#define IRQ_MV78XX0_XOR_1	23
-+#define IRQ_MV78XX0_I2S_0	24
-+#define IRQ_MV78XX0_I2S_1	25
-+#define IRQ_MV78XX0_SATA	26
-+#define IRQ_MV78XX0_TDMI	27
-+
-+/*
-+ * MV78xx0 High Interrupt Controller
-+ */
-+#define IRQ_MV78XX0_PCIE_00	32
-+#define IRQ_MV78XX0_PCIE_01	33
-+#define IRQ_MV78XX0_PCIE_02	34
-+#define IRQ_MV78XX0_PCIE_03	35
-+#define IRQ_MV78XX0_PCIE_10	36
-+#define IRQ_MV78XX0_PCIE_11	37
-+#define IRQ_MV78XX0_PCIE_12	38
-+#define IRQ_MV78XX0_PCIE_13	39
-+#define IRQ_MV78XX0_GE00_SUM	40
-+#define IRQ_MV78XX0_GE00_RX	41
-+#define IRQ_MV78XX0_GE00_TX	42
-+#define IRQ_MV78XX0_GE00_MISC	43
-+#define IRQ_MV78XX0_GE01_SUM	44
-+#define IRQ_MV78XX0_GE01_RX	45
-+#define IRQ_MV78XX0_GE01_TX	46
-+#define IRQ_MV78XX0_GE01_MISC	47
-+#define IRQ_MV78XX0_GE10_SUM	48
-+#define IRQ_MV78XX0_GE10_RX	49
-+#define IRQ_MV78XX0_GE10_TX	50
-+#define IRQ_MV78XX0_GE10_MISC	51
-+#define IRQ_MV78XX0_GE11_SUM	52
-+#define IRQ_MV78XX0_GE11_RX	53
-+#define IRQ_MV78XX0_GE11_TX	54
-+#define IRQ_MV78XX0_GE11_MISC	55
-+#define IRQ_MV78XX0_GPIO_0_7	56
-+#define IRQ_MV78XX0_GPIO_8_15	57
-+#define IRQ_MV78XX0_GPIO_16_23	58
-+#define IRQ_MV78XX0_GPIO_24_31	59
-+#define IRQ_MV78XX0_DB_IN	60
-+#define IRQ_MV78XX0_DB_OUT	61
-+
-+/*
-+ * MV78XX0 General Purpose Pins
-+ */
-+#define IRQ_MV78XX0_GPIO_START	64
-+#define NR_GPIO_IRQS		GPIO_MAX
-+
-+#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/memory.h
-@@ -0,0 +1,14 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/memory.h
-+ */
-+
-+#ifndef __ASM_ARCH_MEMORY_H
-+#define __ASM_ARCH_MEMORY_H
-+
-+#define PHYS_OFFSET		UL(0x00000000)
-+
-+#define __virt_to_bus(x)	__virt_to_phys(x)
-+#define __bus_to_virt(x)	__phys_to_virt(x)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/mv78xx0.h
-@@ -0,0 +1,126 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/mv78xx0.h
-+ *
-+ * Generic definitions for Marvell MV78xx0 SoC flavors:
-+ *  MV781x0 and MV782x0.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_MV78XX0_H
-+#define __ASM_ARCH_MV78XX0_H
-+
-+/*
-+ * Marvell MV78xx0 address maps.
-+ *
-+ * phys
-+ * c0000000	PCIe Memory space
-+ * f0800000	PCIe #0 I/O space
-+ * f0900000	PCIe #1 I/O space
-+ * f0a00000	PCIe #2 I/O space
-+ * f0b00000	PCIe #3 I/O space
-+ * f0c00000	PCIe #4 I/O space
-+ * f0d00000	PCIe #5 I/O space
-+ * f0e00000	PCIe #6 I/O space
-+ * f0f00000	PCIe #7 I/O space
-+ * f1000000	on-chip peripheral registers
-+ *
-+ * virt		phys		size
-+ * fe400000	f102x000	16K	core-specific peripheral registers
-+ * fe700000	f0800000	1M	PCIe #0 I/O space
-+ * fe800000	f0900000	1M	PCIe #1 I/O space
-+ * fe900000	f0a00000	1M	PCIe #2 I/O space
-+ * fea00000	f0b00000	1M	PCIe #3 I/O space
-+ * feb00000	f0c00000	1M	PCIe #4 I/O space
-+ * fec00000	f0d00000	1M	PCIe #5 I/O space
-+ * fed00000	f0e00000	1M	PCIe #6 I/O space
-+ * fee00000	f0f00000	1M	PCIe #7 I/O space
-+ * fef00000	f1000000	1M	on-chip peripheral registers
-+ */
-+#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
-+#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-+#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
-+#define MV78XX0_CORE_REGS_SIZE		SZ_16K
-+
-+#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
-+#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
-+#define MV78XX0_PCIE_IO_SIZE		SZ_1M
-+
-+#define MV78XX0_REGS_PHYS_BASE		0xf1000000
-+#define MV78XX0_REGS_VIRT_BASE		0xfef00000
-+#define MV78XX0_REGS_SIZE		SZ_1M
-+
-+#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
-+#define MV78XX0_PCIE_MEM_SIZE		0x30000000
-+
-+/*
-+ * Core-specific peripheral registers.
-+ */
-+#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
-+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-+#define   L2_WRITETHROUGH	0x00020000
-+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-+#define   SOFT_RESET_OUT_EN	0x00000004
-+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-+#define   SOFT_RESET		0x00000001
-+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-+#define   BRIDGE_INT_TIMER0	0x0002
-+#define   BRIDGE_INT_TIMER1	0x0004
-+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-+#define   IRQ_CAUSE_LOW_OFF	0x0004
-+#define   IRQ_CAUSE_HIGH_OFF	0x0008
-+#define   IRQ_MASK_LOW_OFF	0x0010
-+#define   IRQ_MASK_HIGH_OFF	0x0014
-+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-+
-+/*
-+ * Register Map
-+ */
-+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1700)
-+
-+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
-+
-+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
-+
-+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
-+
-+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
-+
-+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
-+
-+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
-+
-+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
-+
-+
-+#define GPIO_MAX		32
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/system.h
-@@ -0,0 +1,37 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/system.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/mv78xx0.h>
-+
-+static inline void arch_idle(void)
-+{
-+	cpu_do_idle();
-+}
-+
-+static inline void arch_reset(char mode)
-+{
-+	/*
-+	 * Enable soft reset to assert RSTOUTn.
-+	 */
-+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-+
-+	/*
-+	 * Assert soft reset.
-+	 */
-+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-+
-+	while (1)
-+		;
-+}
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/timex.h
-@@ -0,0 +1,9 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/timex.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#define CLOCK_TICK_RATE		(100 * HZ)
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/uncompress.h
-@@ -0,0 +1,47 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/uncompress.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/serial_reg.h>
-+#include <asm/arch/mv78xx0.h>
-+
-+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-+
-+static void putc(const char c)
-+{
-+	unsigned char *base = SERIAL_BASE;
-+	int i;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if (base[UART_LSR << 2] & UART_LSR_THRE)
-+			break;
-+		barrier();
-+	}
-+
-+	base[UART_TX << 2] = c;
-+}
-+
-+static void flush(void)
-+{
-+	unsigned char *base = SERIAL_BASE;
-+	unsigned char mask;
-+	int i;
-+
-+	mask = UART_LSR_TEMT | UART_LSR_THRE;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if ((base[UART_LSR << 2] & mask) == mask)
-+			break;
-+		barrier();
-+	}
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_setup()
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/include/asm-arm/arch-mv78xx0/vmalloc.h
-@@ -0,0 +1,5 @@
-+/*
-+ * include/asm-arm/arch-mv78xx0/vmalloc.h
-+ */
-+
-+#define VMALLOC_END	0xfe000000
---- a/include/asm-arm/arch-orion5x/io.h
-+++ b/include/asm-arm/arch-orion5x/io.h
-@@ -14,7 +14,6 @@
- #include "orion5x.h"
- 
- #define IO_SPACE_LIMIT		0xffffffff
--#define IO_SPACE_REMAP		ORION5X_PCI_SYS_IO_BASE
- 
- static inline void __iomem *
- __arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-@@ -53,15 +52,12 @@ static inline void __iomem *__io(unsigne
- /*****************************************************************************
-  * Helpers to access Orion registers
-  ****************************************************************************/
--#define orion5x_read(r)		__raw_readl(r)
--#define orion5x_write(r, val)	__raw_writel(val, r)
--
- /*
-  * These are not preempt-safe.  Locks, if needed, must be taken
-  * care of by the caller.
-  */
--#define orion5x_setbits(r, mask)	orion5x_write((r), orion5x_read(r) | (mask))
--#define orion5x_clrbits(r, mask)	orion5x_write((r), orion5x_read(r) & ~(mask))
-+#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
-+#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
- 
- 
- #endif
---- a/include/asm-arm/arch-orion5x/orion5x.h
-+++ b/include/asm-arm/arch-orion5x/orion5x.h
-@@ -2,7 +2,7 @@
-  * include/asm-arm/arch-orion5x/orion5x.h
-  *
-  * Generic definitions of Orion SoC flavors:
-- *  Orion-1, Orion-NAS, Orion-VoIP, and Orion-2.
-+ *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
-  *
-  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
-  *
-@@ -63,9 +63,11 @@
- /*******************************************************************************
-  * Supported Devices & Revisions
-  ******************************************************************************/
--/* Orion-1 (88F5181) */
-+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
- #define MV88F5181_DEV_ID	0x5181
- #define MV88F5181_REV_B1	3
-+#define MV88F5181L_REV_A0	8
-+#define MV88F5181L_REV_A1	9
- /* Orion-NAS (88F5182) */
- #define MV88F5182_DEV_ID	0x5182
- #define MV88F5182_REV_A2	2
-@@ -152,6 +154,7 @@
- #define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
- #define  BRIDGE_INT_TIMER0	0x0002
- #define  BRIDGE_INT_TIMER1	0x0004
-+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
- #define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
- #define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
- 
---- a/include/asm-arm/arch-orion5x/uncompress.h
-+++ b/include/asm-arm/arch-orion5x/uncompress.h
-@@ -8,23 +8,38 @@
-  * warranty of any kind, whether express or implied.
-  */
- 
-+#include <linux/serial_reg.h>
- #include <asm/arch/orion5x.h>
- 
--#define MV_UART_THR	((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
--#define MV_UART_LSR 	((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
--
--#define LSR_THRE	0x20
-+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
- 
- static void putc(const char c)
- {
--	int j = 0x1000;
--	while (--j && !(*MV_UART_LSR & LSR_THRE))
-+	unsigned char *base = SERIAL_BASE;
-+	int i;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if (base[UART_LSR << 2] & UART_LSR_THRE)
-+			break;
- 		barrier();
--	*MV_UART_THR = c;
-+	}
-+
-+	base[UART_TX << 2] = c;
- }
- 
- static void flush(void)
- {
-+	unsigned char *base = SERIAL_BASE;
-+	unsigned char mask;
-+	int i;
-+
-+	mask = UART_LSR_TEMT | UART_LSR_THRE;
-+
-+	for (i = 0; i < 0x1000; i++) {
-+		if ((base[UART_LSR << 2] & mask) == mask)
-+			break;
-+		barrier();
-+	}
- }
- 
- /*
---- a/include/asm-arm/assembler.h
-+++ b/include/asm-arm/assembler.h
-@@ -56,6 +56,21 @@
- #endif
- 
- /*
-+ * This can be used to enable code to cacheline align the destination
-+ * pointer when bulk writing to memory.  Experiments on StrongARM and
-+ * XScale didn't show this a worthwhile thing to do when the cache is not
-+ * set to write-allocate (this would need further testing on XScale when WA
-+ * is used).
-+ *
-+ * On Feroceon there is much to gain however, regardless of cache mode.
-+ */
-+#ifdef CONFIG_CPU_FEROCEON
-+#define CALGN(code...) code
-+#else
-+#define CALGN(code...)
-+#endif
-+
-+/*
-  * Enable and disable interrupts
-  */
- #if __LINUX_ARM_ARCH__ >= 6
---- a/include/asm-arm/cacheflush.h
-+++ b/include/asm-arm/cacheflush.h
-@@ -95,11 +95,7 @@
- #endif
- 
- #if defined(CONFIG_CPU_FEROCEON)
--# ifdef _CACHE
--#  define MULTI_CACHE 1
--# else
--#  define _CACHE feroceon
--# endif
-+# define MULTI_CACHE 1
- #endif
- 
- #if defined(CONFIG_CPU_V6)
---- /dev/null
-+++ b/include/asm-arm/plat-orion/cache-feroceon-l2.h
-@@ -0,0 +1,11 @@
-+/*
-+ * include/asm-arm/plat-orion/cache-feroceon-l2.h
-+ *
-+ * Copyright (C) 2008 Marvell Semiconductor
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+extern void __init feroceon_l2_init(int l2_wt_override);
---- a/include/asm-arm/plat-orion/pcie.h
-+++ b/include/asm-arm/plat-orion/pcie.h
-@@ -14,6 +14,7 @@
- u32 orion_pcie_dev_id(void __iomem *base);
- u32 orion_pcie_rev(void __iomem *base);
- int orion_pcie_link_up(void __iomem *base);
-+int orion_pcie_x4_mode(void __iomem *base);
- int orion_pcie_get_local_bus_nr(void __iomem *base);
- void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
- void orion_pcie_setup(void __iomem *base,
---- a/include/asm-arm/tlbflush.h
-+++ b/include/asm-arm/tlbflush.h
-@@ -39,6 +39,7 @@
- #define TLB_V6_D_ASID	(1 << 17)
- #define TLB_V6_I_ASID	(1 << 18)
- 
-+#define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
- #define TLB_DCLEAN	(1 << 30)
- #define TLB_WB		(1 << 31)
- 
-@@ -51,6 +52,7 @@
-  *	  v4    - ARMv4 without write buffer
-  *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
-  *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
-+ *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
-  *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
-  */
- #undef _TLB
-@@ -103,6 +105,23 @@
- # define v4wbi_always_flags	(-1UL)
- #endif
- 
-+#define fr_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
-+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-+
-+#ifdef CONFIG_CPU_TLB_FEROCEON
-+# define fr_possible_flags	fr_tlb_flags
-+# define fr_always_flags	fr_tlb_flags
-+# ifdef _TLB
-+#  define MULTI_TLB 1
-+# else
-+#  define _TLB v4wbi
-+# endif
-+#else
-+# define fr_possible_flags	0
-+# define fr_always_flags	(-1UL)
-+#endif
-+
- #define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
- 			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
- 			 TLB_V4_D_PAGE)
-@@ -245,12 +264,14 @@ extern struct cpu_tlb_fns cpu_tlb;
- #define possible_tlb_flags	(v3_possible_flags | \
- 				 v4_possible_flags | \
- 				 v4wbi_possible_flags | \
-+				 fr_possible_flags | \
- 				 v4wb_possible_flags | \
- 				 v6wbi_possible_flags)
- 
- #define always_tlb_flags	(v3_always_flags & \
- 				 v4_always_flags & \
- 				 v4wbi_always_flags & \
-+				 fr_always_flags & \
- 				 v4wb_always_flags & \
- 				 v6wbi_always_flags)
- 
-@@ -417,6 +438,11 @@ static inline void flush_pmd_entry(pmd_t
- 	if (tlb_flag(TLB_DCLEAN))
- 		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
- 			: : "r" (pmd) : "cc");
-+
-+	if (tlb_flag(TLB_L2CLEAN_FR))
-+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-+			: : "r" (pmd) : "cc");
-+
- 	if (tlb_flag(TLB_WB))
- 		dsb();
- }
-@@ -428,6 +454,10 @@ static inline void clean_pmd_entry(pmd_t
- 	if (tlb_flag(TLB_DCLEAN))
- 		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
- 			: : "r" (pmd) : "cc");
-+
-+	if (tlb_flag(TLB_L2CLEAN_FR))
-+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-+			: : "r" (pmd) : "cc");
- }
- 
- #undef tlb_flag
---- a/include/linux/mv643xx_eth.h
-+++ b/include/linux/mv643xx_eth.h
-@@ -17,30 +17,59 @@
- 
- struct mv643xx_eth_shared_platform_data {
- 	struct mbus_dram_target_info	*dram;
--	unsigned int	t_clk;
-+	unsigned int		t_clk;
- };
- 
- struct mv643xx_eth_platform_data {
-+	/*
-+	 * Pointer back to our parent instance, and our port number.
-+	 */
- 	struct platform_device	*shared;
--	int		port_number;
-+	int			port_number;
- 
-+	/*
-+	 * Whether a PHY is present, and if yes, at which address.
-+	 */
- 	struct platform_device	*shared_smi;
-+	int			force_phy_addr;
-+	int			phy_addr;
- 
--	u16		force_phy_addr;	/* force override if phy_addr == 0 */
--	u16		phy_addr;
--
--	/* If speed is 0, then speed and duplex are autonegotiated. */
--	int		speed;		/* 0, SPEED_10, SPEED_100, SPEED_1000 */
--	int		duplex;		/* DUPLEX_HALF or DUPLEX_FULL */
--
--	/* non-zero values of the following fields override defaults */
--	u32		tx_queue_size;
--	u32		rx_queue_size;
--	u32		tx_sram_addr;
--	u32		tx_sram_size;
--	u32		rx_sram_addr;
--	u32		rx_sram_size;
--	u8		mac_addr[6];	/* mac address if non-zero*/
-+	/*
-+	 * Use this MAC address if it is valid, overriding the
-+	 * address that is already in the hardware.
-+	 */
-+	u8			mac_addr[6];
-+
-+	/*
-+	 * If speed is 0, autonegotiation is enabled.
-+	 *   Valid values for speed: 0, SPEED_10, SPEED_100, SPEED_1000.
-+	 *   Valid values for duplex: DUPLEX_HALF, DUPLEX_FULL.
-+	 */
-+	int			speed;
-+	int			duplex;
-+
-+	/*
-+	 * Which RX/TX queues to use.
-+	 */
-+	int			rx_queue_mask;
-+	int			tx_queue_mask;
-+
-+	/*
-+	 * Override default RX/TX queue sizes if nonzero.
-+	 */
-+	int			rx_queue_size;
-+	int			tx_queue_size;
-+
-+	/*
-+	 * Use on-chip SRAM for RX/TX descriptors if size is nonzero
-+	 * and sufficient to contain all descriptors for the requested
-+	 * ring sizes.
-+	 */
-+	unsigned long		rx_sram_addr;
-+	int			rx_sram_size;
-+	unsigned long		tx_sram_addr;
-+	int			tx_sram_size;
- };
- 
--#endif /* __LINUX_MV643XX_ETH_H */
-+
-+#endif
diff --git a/target/linux/orion/patches/010-ignore_atag_cmdline.patch b/target/linux/orion/patches/010-ignore_atag_cmdline.patch
index f93ad779d3..31a797f669 100644
--- a/target/linux/orion/patches/010-ignore_atag_cmdline.patch
+++ b/target/linux/orion/patches/010-ignore_atag_cmdline.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/kernel/setup.c
 +++ b/arch/arm/kernel/setup.c
-@@ -719,7 +719,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi
+@@ -607,7 +607,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi
  
  static int __init parse_tag_cmdline(const struct tag *tag)
  {
diff --git a/target/linux/orion/patches/020-wnr854t_switch_support.patch b/target/linux/orion/patches/020-wnr854t_switch_support.patch
new file mode 100644
index 0000000000..564474a02e
--- /dev/null
+++ b/target/linux/orion/patches/020-wnr854t_switch_support.patch
@@ -0,0 +1,34 @@
+--- a/arch/arm/mach-orion5x/wnr854t-setup.c
++++ b/arch/arm/mach-orion5x/wnr854t-setup.c
+@@ -15,6 +15,7 @@
+ #include <linux/mtd/physmap.h>
+ #include <linux/mv643xx_eth.h>
+ #include <linux/ethtool.h>
++#include <net/dsa.h>
+ #include <asm/mach-types.h>
+ #include <asm/gpio.h>
+ #include <asm/mach/arch.h>
+@@ -97,6 +98,15 @@ static struct mv643xx_eth_platform_data 
+ 	.duplex		= DUPLEX_FULL,
+ };
+ 
++static struct dsa_platform_data wnr854t_switch_data = {
++	.port_names[0] = "lan3",
++	.port_names[1] = "lan4",
++	.port_names[2] = "wan",
++	.port_names[3] = "cpu",
++	.port_names[5] = "lan1",
++	.port_names[7] = "lan2",
++};
++
+ static void __init wnr854t_init(void)
+ {
+ 	/*
+@@ -110,6 +120,7 @@ static void __init wnr854t_init(void)
+ 	 * Configure peripherals.
+ 	 */
+ 	orion5x_eth_init(&wnr854t_eth_data);
++	orion5x_eth_switch_init(&wnr854t_switch_data, NO_IRQ);
+ 	orion5x_uart0_init();
+ 
+ 	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
diff --git a/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch b/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch
index 6268a05b51..7051159732 100644
--- a/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch
+++ b/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -323,8 +323,9 @@ struct mtd_info *cfi_cmdset_0002(struct 
+@@ -364,8 +364,9 @@ struct mtd_info *cfi_cmdset_0002(struct 
  			return NULL;
  		}
  
diff --git a/target/linux/orion/patches/099-add_netgear_wnr854t_support.patch b/target/linux/orion/patches/099-add_netgear_wnr854t_support.patch
deleted file mode 100644
index cc272b2b88..0000000000
--- a/target/linux/orion/patches/099-add_netgear_wnr854t_support.patch
+++ /dev/null
@@ -1,199 +0,0 @@
---- a/arch/arm/mach-orion5x/Kconfig
-+++ b/arch/arm/mach-orion5x/Kconfig
-@@ -74,6 +74,12 @@ config MACH_MSS2
- 	  Say 'Y' here if you want your kernel to support the
- 	  Maxtor Shared Storage II platform.
- 
-+config MACH_WNR854T
-+	bool "Netgear WNR854T"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Netgear WNR854T platform.
-+
- endmenu
- 
- endif
---- a/arch/arm/mach-orion5x/Makefile
-+++ b/arch/arm/mach-orion5x/Makefile
-@@ -10,3 +10,4 @@ obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n
- obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
- obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
- obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
-+obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
---- /dev/null
-+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
-@@ -0,0 +1,164 @@
-+/*
-+ * arch/arm/mach-orion5x/wnr854t-setup.c
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/pci.h>
-+#include <linux/irq.h>
-+#include <linux/delay.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mv643xx_eth.h>
-+#include <asm/mach-types.h>
-+#include <asm/gpio.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/pci.h>
-+#include <asm/arch/orion5x.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = {
-+	{  0, MPP_GPIO },		/* Power LED green (0=on) */
-+	{  1, MPP_GPIO },		/* Reset Button (0=off) */
-+	{  2, MPP_GPIO },		/* Power LED blink (0=off) */
-+	{  3, MPP_GPIO },		/* WAN Status LED amber (0=off) */
-+	{  4, MPP_GPIO },		/* PCI int */
-+	{  5, MPP_GPIO },		/* ??? */
-+	{  6, MPP_GPIO },		/* ??? */
-+	{  7, MPP_GPIO },		/* ??? */
-+	{  8, MPP_UNUSED },		/* ??? */
-+	{  9, MPP_GIGE },		/* GE_RXERR */
-+	{ 10, MPP_UNUSED },		/* ??? */
-+	{ 11, MPP_UNUSED },		/* ??? */
-+	{ 12, MPP_GIGE },		/* GE_TXD[4] */
-+	{ 13, MPP_GIGE },		/* GE_TXD[5] */
-+	{ 14, MPP_GIGE },		/* GE_TXD[6] */
-+	{ 15, MPP_GIGE },		/* GE_TXD[7] */
-+	{ 16, MPP_GIGE },		/* GE_RXD[4] */
-+	{ 17, MPP_GIGE },		/* GE_RXD[5] */
-+	{ 18, MPP_GIGE },		/* GE_RXD[6] */
-+	{ 19, MPP_GIGE },		/* GE_RXD[7] */
-+	{ -1 },
-+};
-+
-+/*
-+ * 8M NOR flash Device bus boot chip select
-+ */
-+#define WNR854T_NOR_BOOT_BASE	0xf4000000
-+#define WNR854T_NOR_BOOT_SIZE	SZ_8M
-+
-+static struct mtd_partition wnr854t_nor_flash_partitions[] = {
-+	{
-+		.name		= "kernel",
-+		.offset		= 0x00000000,
-+		.size		= 0x00100000,
-+	}, {
-+		.name		= "rootfs",
-+		.offset		= 0x00100000,
-+		.size		= 0x00660000,
-+	}, {
-+		.name		= "uboot",
-+		.offset		= 0x00760000,
-+		.size		= 0x00040000,
-+	},
-+};
-+
-+static struct physmap_flash_data wnr854t_nor_flash_data = {
-+	.width		= 2,
-+	.parts		= wnr854t_nor_flash_partitions,
-+	.nr_parts	= ARRAY_SIZE(wnr854t_nor_flash_partitions),
-+};
-+
-+static struct resource wnr854t_nor_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= WNR854T_NOR_BOOT_BASE,
-+	.end		= WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
-+};
-+
-+static struct platform_device wnr854t_nor_flash = {
-+	.name			= "physmap-flash",
-+	.id			= 0,
-+	.dev		= {
-+		.platform_data	= &wnr854t_nor_flash_data,
-+	},
-+	.num_resources		= 1,
-+	.resource		= &wnr854t_nor_flash_resource,
-+};
-+
-+static struct mv643xx_eth_platform_data wnr854t_eth_data = {
-+	.phy_addr	= -1,
-+};
-+
-+static void __init wnr854t_init(void)
-+{
-+	/*
-+	 * Setup basic Orion functions. Need to be called early.
-+	 */
-+	orion5x_init();
-+
-+	orion5x_mpp_conf(wnr854t_mpp_modes);
-+
-+	/*
-+	 * Configure peripherals.
-+	 */
-+	orion5x_eth_init(&wnr854t_eth_data);
-+	orion5x_uart0_init();
-+
-+	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
-+				   WNR854T_NOR_BOOT_SIZE);
-+	platform_device_register(&wnr854t_nor_flash);
-+}
-+
-+static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	int irq;
-+
-+	/*
-+	 * Check for devices with hard-wired IRQs.
-+	 */
-+	irq = orion5x_pci_map_irq(dev, slot, pin);
-+	if (irq != -1)
-+		return irq;
-+
-+	/*
-+	 * Mini-PCI slot.
-+	 */
-+	if (slot == 7)
-+		return gpio_to_irq(4);
-+
-+	return -1;
-+}
-+
-+static struct hw_pci wnr854t_pci __initdata = {
-+	.nr_controllers	= 2,
-+	.swizzle	= pci_std_swizzle,
-+	.setup		= orion5x_pci_sys_setup,
-+	.scan		= orion5x_pci_sys_scan_bus,
-+	.map_irq	= wnr854t_pci_map_irq,
-+};
-+
-+static int __init wnr854t_pci_init(void)
-+{
-+	if (machine_is_wnr854t())
-+		pci_common_init(&wnr854t_pci);
-+
-+	return 0;
-+}
-+subsys_initcall(wnr854t_pci_init);
-+
-+MACHINE_START(WNR854T, "Netgear WNR854T")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= ORION5X_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= wnr854t_init,
-+	.map_io		= orion5x_map_io,
-+	.init_irq	= orion5x_init_irq,
-+	.timer		= &orion5x_timer,
-+	.fixup		= tag_fixup_mem32,
-+MACHINE_END
---- a/arch/arm/configs/orion5x_defconfig
-+++ b/arch/arm/configs/orion5x_defconfig
-@@ -166,6 +166,7 @@ CONFIG_MACH_KUROBOX_PRO=y
- CONFIG_MACH_DNS323=y
- CONFIG_MACH_TS209=y
- CONFIG_MACH_LINKSTATION_PRO=y
-+CONFIG_MACH_WNR854T=y
- 
- #
- # Boot options
diff --git a/target/linux/orion/patches/100-openwrt_partition_map.patch b/target/linux/orion/patches/100-openwrt_partition_map.patch
index d95e2ec8b6..d57a74fd3f 100644
--- a/target/linux/orion/patches/100-openwrt_partition_map.patch
+++ b/target/linux/orion/patches/100-openwrt_partition_map.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
 +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -56,19 +56,11 @@ static struct mtd_partition wrt350n_v2_n
+@@ -58,19 +58,11 @@ static struct mtd_partition wrt350n_v2_n
  	{
  		.name		= "kernel",
  		.offset		= 0x00000000,
@@ -19,7 +19,7 @@
 -		.offset		= 0x007a0000,
 -		.size		= 0x00020000,
 +		.offset		= 0x00100000,
-+		.size		= 0x006c0000,
++		.size		= 0x006b0000,
  	}, {
  		.name		= "u-boot",
  		.offset		= 0x007c0000,