nuke most of the old ixp4xx patchsets

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11778 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 256 deletions

diff --git a/target/linux/ixp4xx/patches/200-gateway_7001.patch b/target/linux/ixp4xx/patches/200-gateway_7001.patch
deleted file mode 100644
index 509b24a248..0000000000
--- a/target/linux/ixp4xx/patches/200-gateway_7001.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/boot/compressed/head-xscale.S
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/boot/compressed/head-xscale.S
-+++ linux-2.6.21.7/arch/arm/boot/compressed/head-xscale.S
-@@ -46,6 +46,11 @@ __XScale_start:
-                orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
- 
-+#ifdef  CONFIG_MACH_GATEWAY7001
-+               mov     r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
-+               orr     r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_IXP2000
- 		mov	r1, #-1
- 		mov	r0, #0xd6000000
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
-+ *
-+ * PCI setup routines for Gateway 7001
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init gateway7001_pci_preinit(void)
-+{
-+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 1)
-+		return IRQ_IXP4XX_GPIO11;
-+	else if (slot == 2)
-+		return IRQ_IXP4XX_GPIO10;
-+	else return -1;
-+}
-+
-+struct hw_pci gateway7001_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit =        gateway7001_pci_preinit,
-+	.swizzle =        pci_std_swizzle,
-+	.setup =          ixp4xx_setup,
-+	.scan =           ixp4xx_scan_bus,
-+	.map_irq =        gateway7001_map_irq,
-+};
-+
-+int __init gateway7001_pci_init(void)
-+{
-+	if (machine_is_gateway7001())
-+		pci_common_init(&gateway7001_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(gateway7001_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/gateway7001-setup.c
-+ *
-+ * Board setup for the Gateway 7001 board
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data gateway7001_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.width		= 2,
-+};
-+
-+static struct resource gateway7001_flash_resource = {
-+	.flags		= IORESOURCE_MEM,
-+};
-+
-+static struct platform_device gateway7001_flash = {
-+	.name		= "IXP4XX-Flash",
-+	.id		= 0,
-+	.dev		= {
-+		.platform_data = &gateway7001_flash_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &gateway7001_flash_resource,
-+};
-+
-+static struct resource gateway7001_uart_resource = {
-+	.start	= IXP4XX_UART2_BASE_PHYS,
-+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port gateway7001_uart_data[] = {
-+	{
-+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+		.irq		= IRQ_IXP4XX_UART2,
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+		.iotype		= UPIO_MEM,
-+		.regshift	= 2,
-+		.uartclk	= IXP4XX_UART_XTAL,
-+	},
-+	{ },
-+};
-+
-+static struct platform_device gateway7001_uart = {
-+	.name		= "serial8250",
-+	.id		= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= gateway7001_uart_data,
-+	},
-+	.num_resources	= 1,
-+	.resource	= &gateway7001_uart_resource,
-+};
-+
-+static struct platform_device *gateway7001_devices[] __initdata = {
-+	&gateway7001_flash,
-+	&gateway7001_uart
-+};
-+
-+static void __init gateway7001_init(void)
-+{
-+	ixp4xx_sys_init();
-+
-+	gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+	gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+	platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-+}
-+
-+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.timer		= &ixp4xx_timer,
-+	.boot_params	= 0x0100,
-+	.init_machine	= gateway7001_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -41,6 +41,14 @@ config ARCH_ADI_COYOTE
- 	  Engineering Coyote Gateway Reference Platform. For more
- 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
- 
-+config MACH_GATEWAY7001
-+	bool "Gateway 7001"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support Gateway's 
-+	  7001 Access Point. For more information on this platform,
-+	  see http://openwrt.org
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	help
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -13,6 +13,7 @@ obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx
- obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-pci.o
- obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
-+obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
- 
- obj-y	+= common.o
- 
-@@ -24,5 +25,6 @@ obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-
- obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o nas100d-power.o
- obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
-+obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
- 
- obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -38,9 +38,9 @@ static void flush(void)
- static __inline__ void __arch_decomp_setup(unsigned long arch_id)
- {
- 	/*
--	 * Coyote and gtwx5715 only have UART2 connected
-+	 * Some boards are using UART2 as console
- 	 */
--	if (machine_is_adi_coyote() || machine_is_gtwx5715())
-+	if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;