kernel: reorganize 2.6.37 patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26692 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 373 insertions, 0 deletions

diff --git a/target/linux/generic/patches-2.6.37/862-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.37/862-gpio_spi_driver.patch
new file mode 100644
index 0000000000..5405e8201d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.37/862-gpio_spi_driver.patch
@@ -0,0 +1,373 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+---
+ drivers/spi/Kconfig              |    9 +
+ drivers/spi/Makefile             |    1 
+ drivers/spi/spi_gpio_old.c       |  251 +++++++++++++++++++++++++++++++++++++++
+ include/linux/spi/spi_gpio_old.h |   73 +++++++++++
+ 4 files changed, 334 insertions(+)
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include "spi_bitbang_txrx.h"
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -158,6 +158,15 @@ config SPI_IMX_VER_0_7
+ config SPI_IMX_VER_2_3
+ 	def_bool y if ARCH_MX51
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale i.MX SPI controllers"
+ 	depends on ARCH_MXC
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.
+ obj-$(CONFIG_SPI_DW_MMIO)		+= dw_spi_mmio.o
+ obj-$(CONFIG_SPI_EP93XX)		+= ep93xx_spi.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o