remove the unused files-2.6.24 directory

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15442 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 129 deletions

diff --git a/target/linux/generic-2.6/files-2.6.24/drivers/ssb/driver_extif.c b/target/linux/generic-2.6/files-2.6.24/drivers/ssb/driver_extif.c
deleted file mode 100644
index fe55eb8b03..0000000000
--- a/target/linux/generic-2.6/files-2.6.24/drivers/ssb/driver_extif.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Sonics Silicon Backplane
- * Broadcom EXTIF core driver
- *
- * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
- * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
- * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include "ssb_private.h"
-
-
-static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
-{
-	return ssb_read32(extif->dev, offset);
-}
-
-static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
-{
-	ssb_write32(extif->dev, offset, value);
-}
-
-static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
-					u32 mask, u32 value)
-{
-	value &= mask;
-	value |= extif_read32(extif, offset) & ~mask;
-	extif_write32(extif, offset, value);
-}
-
-#ifdef CONFIG_SSB_SERIAL
-static bool serial_exists(u8 *regs)
-{
-	u8 save_mcr, msr = 0;
-
-	if (regs) {
-		save_mcr = regs[UART_MCR];
-		regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
-		msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI
-					| UART_MSR_CTS | UART_MSR_DSR);
-		regs[UART_MCR] = save_mcr;
-	}
-	return (msr == (UART_MSR_DCD | UART_MSR_CTS));
-}
-
-int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports)
-{
-	u32 i, nr_ports = 0;
-
-	/* Disable GPIO interrupt initially */
-	extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);
-	extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0);
-
-	for (i = 0; i < 2; i++) {
-		void __iomem *uart_regs;
-
-		uart_regs = ioremap_nocache(SSB_EUART, 16);
-		if (uart_regs) {
-			uart_regs += (i * 8);
-
-			if (serial_exists(uart_regs) && ports) {
-				extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2);
-
-				nr_ports++;
-				ports[i].regs = uart_regs;
-				ports[i].irq = 2;
-				ports[i].baud_base = 13500000;
-				ports[i].reg_shift = 0;
-			}
-			iounmap(uart_regs);
-		}
-	}
-	return nr_ports;
-}
-#endif /* CONFIG_SSB_SERIAL */
-
-void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
-{
-	u32 tmp;
-
-	/* Initialize extif so we can get to the LEDs and external UART */
-	extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
-
-	/* Set timing for the flash */
-	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
-	tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
-	tmp |= DIV_ROUND_UP(120, ns);
-	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
-
-	/* Set programmable interface timing for external uart */
-	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
-	tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
-	tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
-	tmp |= DIV_ROUND_UP(120, ns);
-	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
-}
-
-void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
-				u32 *pll_type, u32 *n, u32 *m)
-{
-	*pll_type = SSB_PLLTYPE_1;
-	*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
-	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
-}
-
-u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
-{
-	return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
-}
-
-void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
-{
-	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
-				   mask, value);
-}
-
-void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
-{
-	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
-				   mask, value);
-}
-