[cns3xxx]: rename 2.6.39 patches directory

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30453 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 421 deletions

diff --git a/target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch b/target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch
deleted file mode 100644
index 36f5e0c1eb..0000000000
--- a/target/linux/cns3xxx/patches/050-cns3xxx_i2c_controller.patch
+++ /dev/null
@@ -1,421 +0,0 @@
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -325,6 +325,18 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
- 	help
- 	  The unit of the TWI clock is kHz.
- 
-+config I2C_CNS3XXX
-+	tristate "Cavium CNS3xxx I2C driver"
-+	depends on ARCH_CNS3XXX
-+	help
-+	  Support for Cavium CNS3xxx I2C controller driver.
-+
-+	  This driver can also be built as a module.  If so, the module
-+	  will be called i2c-cns3xxx.
-+
-+	  Please note that this driver might be needed to bring up other
-+	  devices such as Cavium CNS3xxx Ethernet.
-+
- config I2C_CPM
- 	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
- 	depends on (CPM1 || CPM2) && OF_I2C
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -80,6 +80,7 @@ obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor
- obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
- obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
- obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
-+obj-$(CONFIG_I2C_CNS3XXX)	+= i2c-cns3xxx.o
- obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
- obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
- 
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-cns3xxx.c
-@@ -0,0 +1,387 @@
-+/*
-+ * Cavium CNS3xxx I2C Host Controller
-+ *
-+ * Copyright 2010 Cavium Network
-+ * Copyright 2011 Gateworks Corporation
-+ *		  Chris Lang <clang@gateworks.com>
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <asm/io.h>
-+#include <linux/wait.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/slab.h>
-+#include <mach/pm.h>
-+#include <mach/cns3xxx.h>
-+
-+/*
-+ * We need the memory map
-+ */
-+
-+
-+#define MISC_MEM_MAP_VALUE(reg_offset)	(*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
-+#define MISC_IOCDB_CTRL				MISC_MEM_MAP_VALUE(0x020)
-+
-+#define I2C_MEM_MAP_ADDR(x)         (CNS3XXX_SSP_BASE_VIRT + x)
-+#define I2C_MEM_MAP_VALUE(x)        (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
-+
-+#define I2C_CONTROLLER_REG                    I2C_MEM_MAP_VALUE(0x20)
-+#define I2C_TIME_OUT_REG                      I2C_MEM_MAP_VALUE(0x24)
-+#define I2C_SLAVE_ADDRESS_REG                 I2C_MEM_MAP_VALUE(0x28)
-+#define I2C_WRITE_DATA_REG                    I2C_MEM_MAP_VALUE(0x2C)
-+#define I2C_READ_DATA_REG                     I2C_MEM_MAP_VALUE(0x30)
-+#define I2C_INTERRUPT_STATUS_REG              I2C_MEM_MAP_VALUE(0x34)
-+#define I2C_INTERRUPT_ENABLE_REG              I2C_MEM_MAP_VALUE(0x38)
-+#define I2C_TWI_OUT_DLY_REG			         			I2C_MEM_MAP_VALUE(0x3C)
-+
-+#define I2C_BUS_ERROR_FLAG     (0x1)
-+#define I2C_ACTION_DONE_FLAG   (0x2)
-+
-+#define CNS3xxx_I2C_ENABLE()          (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_DISABLE()         (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_ENABLE_INTR()     (I2C_INTERRUPT_ENABLE_REG) |= 0x03
-+#define CNS3xxx_I2C_DISABLE_INTR()    (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
-+
-+#define TWI_TIMEOUT         (10*HZ)
-+#define I2C_100KHZ          100000
-+#define I2C_200KHZ          200000
-+#define I2C_300KHZ          300000
-+#define I2C_400KHZ          400000
-+
-+#define CNS3xxx_I2C_CLK     I2C_100KHZ
-+
-+#define STATE_DONE		1
-+#define STATE_ERROR		2
-+
-+struct cns3xxx_i2c {
-+	void __iomem *base;
-+	wait_queue_head_t wait;
-+	struct i2c_adapter adap;
-+	struct i2c_msg *msg;
-+	int state;		/* see STATE_ */
-+	int rd_wr_len;
-+	u8 *buf;
-+};
-+
-+static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
-+{
-+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
-+{
-+	struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
-+	int i, j;
-+	u8 buf[1] = { 0 };
-+
-+	if (msg->len == 0) {
-+		/*
-+		 *	We are probably doing a probe for a device here,
-+		 *	so set the length to one, and data to 0
-+		 */
-+		msg->len = 1;
-+		i2c->buf = buf;
-+	} else {
-+		i2c->buf = msg->buf;
-+	}
-+
-+	if (msg->flags & I2C_M_TEN) {
-+		printk
-+			("%s:%d: Presently the driver does not handle extended addressing\n",
-+				__FUNCTION__, __LINE__);
-+		return -EINVAL;
-+	}
-+	i2c->msg = msg;
-+
-+	for (i = 0; i < msg->len; i++) {
-+		if (msg->len - i >= 4)
-+			i2c->rd_wr_len = 3;
-+		else
-+			i2c->rd_wr_len = msg->len - i - 1;
-+
-+		// Set Data Width	and TWI_EN
-+		I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+
-+		// Clear Write Reg
-+		I2C_WRITE_DATA_REG = 0;
-+
-+		// Set the slave address
-+		I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
-+
-+		// Are we Writing
-+		if (!(msg->flags & I2C_M_RD)) {
-+			I2C_CONTROLLER_REG |= (1 << 4);
-+			if (i != 0) {
-+				/*
-+				 * We need to set the address in the first byte.
-+				 * The base address is going to be in buf[0] and then
-+				 * it needs to be incremented by i - 1.
-+				 */
-+				i2c->buf--;
-+				*i2c->buf = buf[0] + i - 1;
-+
-+				if (i2c->rd_wr_len < 3) {
-+					i += i2c->rd_wr_len;
-+					i2c->rd_wr_len++;
-+					I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+				} else {
-+					i += i2c->rd_wr_len - 1;
-+				}
-+			} else {
-+				i += i2c->rd_wr_len;
-+				buf[0] = *i2c->buf;
-+			}
-+			for (j = 0; j <= i2c->rd_wr_len; j++) {
-+				I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
-+			}
-+		} else {
-+			i += i2c->rd_wr_len;
-+		}
-+
-+		// Start the Transfer
-+		i2c->state = 0;		// Clear out the State
-+		I2C_CONTROLLER_REG |= (1 << 6);
-+
-+		if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-+				(i2c->state == STATE_DONE), TWI_TIMEOUT)) {
-+			if (i2c->state == STATE_ERROR) {
-+				return -EIO;
-+			}
-+		} else {
-+			return -ETIMEDOUT;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-+{
-+	int i;
-+	int ret;
-+	for (i = 0; i < num; i++)
-+	{
-+		ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
-+		if (ret < 0) {
-+			return ret;
-+		}
-+	}
-+	return num;
-+}
-+
-+
-+static struct i2c_algorithm cns3xxx_i2c_algo = {
-+	.master_xfer = cns3xxx_i2c_xfer,
-+	.functionality = cns3xxx_i2c_func,
-+};
-+
-+static struct i2c_adapter cns3xxx_i2c_adapter = {
-+	.owner = THIS_MODULE,
-+	.algo = &cns3xxx_i2c_algo,
-+	.algo_data = NULL,
-+	.nr = 0,
-+	.name = "CNS3xxx I2C 0",
-+	.retries = 5,
-+};
-+
-+static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
-+{
-+        cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+        cns3xxx_pwr_power_up(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+        cns3xxx_pwr_soft_rst(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+
-+	/* Disable the I2C */
-+	I2C_CONTROLLER_REG = 0;	/* Disabled the I2C */
-+
-+	//enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
-+	//GPIOB[12]: SCL
-+	//GPIOB[13]: SDA
-+	(*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
-+
-+	MISC_IOCDB_CTRL &= ~0x300;
-+	MISC_IOCDB_CTRL |= 0x300; //21mA...
-+
-+	/* Check the Reg Dump when testing */
-+	I2C_TIME_OUT_REG =
-+	    ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
-+		1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
-+	I2C_TWI_OUT_DLY_REG |= 0x3;
-+
-+	/* Enable The Interrupt */
-+	CNS3xxx_I2C_ENABLE_INTR();
-+
-+	/* Clear Interrupt Status (0x2 | 0x1) */
-+	I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
-+
-+	/* Enable the I2C Controller */
-+	CNS3xxx_I2C_ENABLE();
-+}
-+
-+static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
-+{
-+	struct cns3xxx_i2c *i2c = dev_id;
-+	int i;
-+	uint32_t stat = I2C_INTERRUPT_STATUS_REG;
-+
-+	/* Clear Interrupt */
-+	I2C_INTERRUPT_STATUS_REG |= 0x1;
-+
-+	if (stat & I2C_BUS_ERROR_FLAG) {
-+		i2c->state = STATE_ERROR;
-+	} else {
-+		if (i2c->msg->flags & I2C_M_RD) {
-+			for (i = 0; i <= i2c->rd_wr_len; i++)
-+			{
-+				*i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
-+			}
-+		}
-+		i2c->state = STATE_DONE;
-+	}
-+	wake_up(&i2c->wait);
-+	return IRQ_HANDLED;
-+}
-+
-+static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
-+{
-+	struct cns3xxx_i2c *i2c;
-+	struct resource *res, *res2;
-+	int ret;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
-+		return -ENODEV;
-+	}
-+
-+	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+	if (!res2) {
-+		printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
-+		return -ENODEV;
-+	}
-+
-+	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
-+	if (!i2c)
-+		return -ENOMEM;
-+
-+	if (!request_mem_region(res->start, res->end - res->start + 1,
-+				pdev->name)) {
-+		dev_err(&pdev->dev, "Memory region busy\n");
-+		ret = -EBUSY;
-+		goto request_mem_failed;
-+	}
-+
-+	i2c->base = ioremap(res->start, res->end - res->start + 1);
-+	if (!i2c->base) {
-+		dev_err(&pdev->dev, "Unable to map registers\n");
-+		ret = -EIO;
-+		goto map_failed;
-+	}
-+
-+	cns3xxx_i2c_adapter_init(i2c);
-+
-+	init_waitqueue_head(&i2c->wait);
-+	ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
-+		goto request_irq_failed;
-+	}
-+
-+	platform_set_drvdata(pdev, i2c);
-+	i2c->adap = cns3xxx_i2c_adapter;
-+	i2c_set_adapdata(&i2c->adap, i2c);
-+	i2c->adap.dev.parent = &pdev->dev;
-+
-+	/* add i2c adapter to i2c tree */
-+	ret = i2c_add_numbered_adapter(&i2c->adap);
-+	if (ret) {
-+		dev_err(&pdev->dev, "Failed to add adapter\n");
-+		goto add_adapter_failed;
-+	}
-+
-+	return 0;
-+
-+      add_adapter_failed:
-+	free_irq(res2->start, i2c);
-+      request_irq_failed:
-+	iounmap(i2c->base);
-+      map_failed:
-+	release_mem_region(res->start, res->end - res->start + 1);
-+      request_mem_failed:
-+	kfree(i2c);
-+
-+	return ret;
-+}
-+
-+static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
-+{
-+	struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
-+	struct resource *res;
-+
-+	/* disable i2c logic */
-+	CNS3xxx_I2C_DISABLE_INTR();
-+	CNS3xxx_I2C_DISABLE();
-+	/* remove adapter & data */
-+	i2c_del_adapter(&i2c->adap);
-+	platform_set_drvdata(pdev, NULL);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+	if (res)
-+		free_irq(res->start, i2c);
-+
-+	iounmap(i2c->base);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (res)
-+		release_mem_region(res->start, res->end - res->start + 1);
-+
-+	kfree(i2c);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+#warning "CONFIG_PM defined: suspend and resume not implemented"
-+#define cns3xxx_i2c_suspend	NULL
-+#define cns3xxx_i2c_resume	NULL
-+#else
-+#define cns3xxx_i2c_suspend	NULL
-+#define cns3xxx_i2c_resume	NULL
-+#endif
-+
-+static struct platform_driver cns3xxx_i2c_driver = {
-+	.probe = cns3xxx_i2c_probe,
-+	.remove = cns3xxx_i2c_remove,
-+	.suspend = cns3xxx_i2c_suspend,
-+	.resume = cns3xxx_i2c_resume,
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name = "cns3xxx-i2c",
-+	},
-+};
-+
-+static int __init cns3xxx_i2c_init(void)
-+{
-+	return platform_driver_register(&cns3xxx_i2c_driver);
-+}
-+
-+static void __exit cns3xxx_i2c_exit(void)
-+{
-+	platform_driver_unregister(&cns3xxx_i2c_driver);
-+}
-+
-+module_init(cns3xxx_i2c_init);
-+module_exit(cns3xxx_i2c_exit);
-+
-+MODULE_AUTHOR("Cavium Networks");
-+MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
-+MODULE_LICENSE("GPL");