brcm47xx: use libgpio instaed of implementing the gpio interface ourself.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 712 insertions, 111 deletions

diff --git a/target/linux/brcm47xx/config-3.3 b/target/linux/brcm47xx/config-3.3
index 4ee8142f37..e207cf1743 100644
--- a/target/linux/brcm47xx/config-3.3
+++ b/target/linux/brcm47xx/config-3.3
@@ -1,6 +1,7 @@
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_ARPD is not set
 CONFIG_B44=y
@@ -15,6 +16,7 @@ CONFIG_BCMA=y
 CONFIG_BCMA_BLOCKIO=y
 CONFIG_BCMA_DEBUG=y
 CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
 CONFIG_BCMA_DRIVER_MIPS=y
 CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
 CONFIG_BCMA_HOST_PCI=y
@@ -50,6 +52,8 @@ CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GENERIC_PCI_IOMAP=y
+# CONFIG_GENERIC_PWM is not set
+CONFIG_GPIOLIB=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
diff --git a/target/linux/brcm47xx/patches-3.3/050-bcma-export-needed-gpio-functions.patch b/target/linux/brcm47xx/patches-3.3/050-bcma-export-needed-gpio-functions.patch
deleted file mode 100644
index 7d172d4c93..0000000000
--- a/target/linux/brcm47xx/patches-3.3/050-bcma-export-needed-gpio-functions.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From f6e41db3ee7ead99e1398def222c14893fc265de Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 4 Aug 2011 21:09:48 +0200
-Subject: [PATCH 26/26] bcma: export needed gpio functions
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/driver_chipcommon.c |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -81,16 +81,19 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
- {
- 	return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
- 
- u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
- 
- u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
- 
- u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-@@ -102,11 +105,13 @@ u32 bcma_chipco_gpio_intmask(struct bcma
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
- 
- u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
- 
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
diff --git a/target/linux/brcm47xx/patches-3.3/140-bcm47xx-add-gpio_set_debounce.patch b/target/linux/brcm47xx/patches-3.3/140-bcm47xx-add-gpio_set_debounce.patch
deleted file mode 100644
index c37bb13d14..0000000000
--- a/target/linux/brcm47xx/patches-3.3/140-bcm47xx-add-gpio_set_debounce.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -151,5 +151,9 @@ static inline int gpio_polarity(unsigned
- 	return -EINVAL;
- }
- 
-+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-+{
-+	return -ENOSYS;
-+}
- 
- #endif /* __BCM47XX_GPIO_H */
diff --git a/target/linux/brcm47xx/patches-3.3/220-add_gpio_request_one.patch b/target/linux/brcm47xx/patches-3.3/220-add_gpio_request_one.patch
deleted file mode 100644
index 00005e2d5a..0000000000
--- a/target/linux/brcm47xx/patches-3.3/220-add_gpio_request_one.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -7,6 +7,7 @@
-  */
- 
- #include <linux/export.h>
-+#include <linux/gpio.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_driver_chipcommon.h>
- #include <linux/ssb/ssb_driver_extif.h>
-@@ -100,3 +101,30 @@ int gpio_to_irq(unsigned gpio)
- 	return -EINVAL;
- }
- EXPORT_SYMBOL_GPL(gpio_to_irq);
-+
-+/**
-+ * gpio_request_one - request a single GPIO with initial configuration
-+ * @gpio:	the GPIO number
-+ * @flags:	GPIO configuration as specified by GPIOF_*
-+ * @label:	a literal description string of this GPIO
-+ */
-+int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-+{
-+	int err;
-+
-+	err = gpio_request(gpio, label);
-+	if (err)
-+		return err;
-+
-+	if (flags & GPIOF_DIR_IN)
-+		err = gpio_direction_input(gpio);
-+	else
-+		err = gpio_direction_output(gpio,
-+				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
-+
-+	if (err)
-+		gpio_free(gpio);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL_GPL(gpio_request_one);
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -19,6 +19,7 @@
- extern int gpio_request(unsigned gpio, const char *label);
- extern void gpio_free(unsigned gpio);
- extern int gpio_to_irq(unsigned gpio);
-+extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
- 
- static inline int gpio_get_value(unsigned gpio)
- {
diff --git a/target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch b/target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch
new file mode 100644
index 0000000000..f1b483e4a4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.3/500-ssb-add-function-to-return-number-of-gpio-lines.patch
@@ -0,0 +1,40 @@
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -136,6 +136,18 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
+ }
+ EXPORT_SYMBOL(ssb_gpio_polarity);
+ 
++int ssb_gpio_count(struct ssb_bus *bus)
++{
++	if (ssb_chipco_available(&bus->chipco))
++		return SSB_GPIO_CHIPCO_LINES;
++	else if (ssb_extif_available(&bus->extif))
++		return SSB_GPIO_EXTIF_LINES;
++	else
++		SSB_WARN_ON(1);
++	return 0;
++}
++EXPORT_SYMBOL(ssb_gpio_count);
++
+ #ifdef CONFIG_SSB_DRIVER_GIGE
+ static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
+ {
+--- a/include/linux/ssb/ssb_embedded.h
++++ b/include/linux/ssb/ssb_embedded.h
+@@ -7,6 +7,9 @@
+ 
+ extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+ 
++#define SSB_GPIO_EXTIF_LINES	5
++#define SSB_GPIO_CHIPCO_LINES	16
++
+ /* Generic GPIO API */
+ u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
+ u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
+@@ -14,5 +17,6 @@ u32 ssb_gpio_outen(struct ssb_bus *bus,
+ u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
+ u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
+ u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
++int ssb_gpio_count(struct ssb_bus *bus);
+ 
+ #endif /* LINUX_SSB_EMBEDDED_H_ */
diff --git a/target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch b/target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch
new file mode 100644
index 0000000000..1fd2cffffb
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.3/501-bcma-add-gpio-driver.patch
@@ -0,0 +1,170 @@
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -39,6 +39,11 @@ config BCMA_HOST_SOC
+ 	depends on BCMA_DRIVER_MIPS
+ 	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+ 
++config BCMA_DRIVER_GPIO
++	bool
++	depends on BCMA_DRIVER_MIPS
++	default y
++
+ config BCMA_SFLASH
+ 	bool
+ 	depends on BCMA_DRIVER_MIPS
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -6,6 +6,7 @@ bcma-y					+= driver_pci.o
+ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
+ bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
+ bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)	+= driver_gmac_cmn.o
++bcma-$(CONFIG_BCMA_DRIVER_GPIO)		+= driver_gpio.o
+ bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
+ obj-$(CONFIG_BCMA)			+= bcma.o
+--- /dev/null
++++ b/drivers/bcma/driver_gpio.c
+@@ -0,0 +1,96 @@
++/*
++ * Broadcom specific AMBA
++ * GPIO driver for SoCs
++ *
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/export.h>
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_driver_gpio.h>
++
++u32 bcma_gpio_in(struct bcma_bus *bus, u32 mask)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&bus->gpio_lock, flags);
++	res = bcma_chipco_gpio_in(&bus->drv_cc, mask);
++	spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++	return res;
++}
++EXPORT_SYMBOL(bcma_gpio_in);
++
++u32 bcma_gpio_out(struct bcma_bus *bus, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&bus->gpio_lock, flags);
++	res = bcma_chipco_gpio_out(&bus->drv_cc, mask, value);
++	spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++	return res;
++}
++EXPORT_SYMBOL(bcma_gpio_out);
++
++u32 bcma_gpio_outen(struct bcma_bus *bus, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&bus->gpio_lock, flags);
++	res = bcma_chipco_gpio_outen(&bus->drv_cc, mask, value);
++	spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++	return res;
++}
++EXPORT_SYMBOL(bcma_gpio_outen);
++
++u32 bcma_gpio_control(struct bcma_bus *bus, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&bus->gpio_lock, flags);
++	res = bcma_chipco_gpio_control(&bus->drv_cc, mask, value);
++	spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++	return res;
++}
++EXPORT_SYMBOL(bcma_gpio_control);
++
++u32 bcma_gpio_intmask(struct bcma_bus *bus, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&bus->gpio_lock, flags);
++	res = bcma_chipco_gpio_intmask(&bus->drv_cc, mask, value);
++	spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++	return res;
++}
++EXPORT_SYMBOL(bcma_gpio_intmask);
++
++u32 bcma_gpio_polarity(struct bcma_bus *bus, u32 mask, u32 value)
++{
++	unsigned long flags;
++	u32 res = 0;
++
++	spin_lock_irqsave(&bus->gpio_lock, flags);
++	res = bcma_chipco_gpio_polarity(&bus->drv_cc, mask, value);
++	spin_unlock_irqrestore(&bus->gpio_lock, flags);
++
++	return res;
++}
++EXPORT_SYMBOL(bcma_gpio_polarity);
++
++int bcma_gpio_count(struct bcma_bus *bus)
++{
++	return BCMA_GPIO_CC_LINES;
++}
++EXPORT_SYMBOL(bcma_gpio_count);
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -422,6 +422,10 @@ void bcma_init_bus(struct bcma_bus *bus)
+ 	if (bus->init_done)
+ 		return;
+ 
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++	spin_lock_init(&bus->gpio_lock);
++#endif
++
+ 	INIT_LIST_HEAD(&bus->cores);
+ 	bus->nr_cores = 0;
+ 
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -255,6 +255,11 @@ struct bcma_bus {
+ 	struct bcma_drv_mips drv_mips;
+ 	struct bcma_drv_gmac_cmn drv_gmac_cmn;
+ 
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++	/* Lock for GPIO register access. */
++	spinlock_t gpio_lock;
++#endif /* CONFIG_BCMA_DRIVER_GPIO */
++
+ 	/* We decided to share SPROM struct with SSB as long as we do not need
+ 	 * any hacks for BCMA. This simplifies drivers code. */
+ 	struct ssb_sprom sprom;
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_gpio.h
+@@ -0,0 +1,17 @@
++#ifndef LINUX_BCMA_DRIVER_GPIO_H_
++#define LINUX_BCMA_DRIVER_GPIO_H_
++
++#include <linux/types.h>
++#include <linux/bcma/bcma.h>
++
++#define BCMA_GPIO_CC_LINES	16
++
++u32 bcma_gpio_in(struct bcma_bus *bus, u32 mask);
++u32 bcma_gpio_out(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_outen(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_control(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_intmask(struct bcma_bus *bus, u32 mask, u32 value);
++u32 bcma_gpio_polarity(struct bcma_bus *bus, u32 mask, u32 value);
++int bcma_gpio_count(struct bcma_bus *bus);
++
++#endif /* LINUX_BCMA_DRIVER_GPIO_H_ */
diff --git a/target/linux/brcm47xx/patches-3.3/502-bcm47xx-rewrite-gpio-handling.patch b/target/linux/brcm47xx/patches-3.3/502-bcm47xx-rewrite-gpio-handling.patch
new file mode 100644
index 0000000000..4aa2e46d77
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.3/502-bcm47xx-rewrite-gpio-handling.patch
@@ -0,0 +1,490 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -92,6 +92,7 @@ config ATH79
+ 
+ config BCM47XX
+ 	bool "Broadcom BCM47XX based boards"
++	select ARCH_REQUIRE_GPIOLIB
+ 	select BOOT_RAW
+ 	select CEVT_R4K
+ 	select CSRC_R4K
+@@ -100,7 +101,6 @@ config BCM47XX
+ 	select IRQ_CPU
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+-	select GENERIC_GPIO
+ 	select CFE
+ 	help
+ 	 Support for BCM47XX based boards
+--- a/arch/mips/bcm47xx/gpio.c
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -4,81 +4,198 @@
+  * for more details.
+  *
+  * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Parts of this file are based on Atheros AR71XX/AR724X/AR913X GPIO
+  */
+ 
+ #include <linux/export.h>
++#include <linux/gpio.h>
+ #include <linux/ssb/ssb.h>
+-#include <linux/ssb/ssb_driver_chipcommon.h>
+-#include <linux/ssb/ssb_driver_extif.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-#include <asm/mach-bcm47xx/gpio.h>
++#include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_driver_gpio.h>
++
++#include <bcm47xx.h>
+ 
+-#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
+-static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
+-#else
+-static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
+-#endif
+ 
+-int gpio_request(unsigned gpio, const char *tag)
++static unsigned long bcm47xx_gpio_count;
++
++/* low level BCM47xx gpio api */
++u32 bcm47xx_gpio_in(u32 mask)
+ {
+ 	switch (bcm47xx_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+-		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+-		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+-			return -EINVAL;
+-
+-		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+-		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+-			return -EINVAL;
++		return ssb_gpio_in(&bcm47xx_bus.ssb, mask);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_gpio_in(&bcm47xx_bus.bcma.bus, mask);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_in);
+ 
+-		if (test_and_set_bit(gpio, gpio_in_use))
+-			return -EBUSY;
++u32 bcm47xx_gpio_out(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_gpio_out(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_out);
+ 
+-		return 0;
++u32 bcm47xx_gpio_outen(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ 	case BCM47XX_BUS_TYPE_BCMA:
+-		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+-			return -EINVAL;
++		return bcma_gpio_outen(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_outen);
+ 
+-		if (test_and_set_bit(gpio, gpio_in_use))
+-			return -EBUSY;
++u32 bcm47xx_gpio_control(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_gpio_control(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_control);
+ 
+-		return 0;
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_gpio_intmask(&bcm47xx_bus.bcma.bus, mask, value);
+ #endif
+ 	}
+ 	return -EINVAL;
+ }
+-EXPORT_SYMBOL(gpio_request);
++EXPORT_SYMBOL(bcm47xx_gpio_intmask);
+ 
+-void gpio_free(unsigned gpio)
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value)
+ {
+ 	switch (bcm47xx_bus_type) {
+ #ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+-		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+-		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+-			return;
++		return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_gpio_polarity(&bcm47xx_bus.bcma.bus, mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_polarity);
++
++
++
++static int bcm47xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++	return bcm47xx_gpio_in(1 << gpio);
++}
++
++static void bcm47xx_gpio_set_value(struct gpio_chip *chip,
++				   unsigned gpio, int value)
++{
++	bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int bcm47xx_gpio_direction_input(struct gpio_chip *chip,
++					unsigned gpio)
++{
++	bcm47xx_gpio_outen(1 << gpio, 0);
++	return 0;
++}
++
++static int bcm47xx_gpio_direction_output(struct gpio_chip *chip,
++					 unsigned gpio, int value)
++{
++	/* first set the gpio out value */
++	bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
++	/* then set the gpio mode */
++	bcm47xx_gpio_outen(1 << gpio, 1 << gpio);
++	return 0;
++}
++
++static struct gpio_chip bcm47xx_gpio_chip = {
++	.label			= "bcm47xx",
++	.get			= bcm47xx_gpio_get_value,
++	.set			= bcm47xx_gpio_set_value,
++	.direction_input	= bcm47xx_gpio_direction_input,
++	.direction_output	= bcm47xx_gpio_direction_output,
++	.base			= 0,
++};
+ 
+-		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+-		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+-			return;
++void __init bcm47xx_gpio_init(void)
++{
++	int err;
+ 
+-		clear_bit(gpio, gpio_in_use);
+-		return;
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		bcm47xx_gpio_count = ssb_gpio_count(&bcm47xx_bus.ssb);
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ 	case BCM47XX_BUS_TYPE_BCMA:
+-		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+-			return;
+-
+-		clear_bit(gpio, gpio_in_use);
+-		return;
++		bcm47xx_gpio_count = bcma_gpio_count(&bcm47xx_bus.bcma.bus);
+ #endif
+ 	}
++
++	bcm47xx_gpio_chip.ngpio = bcm47xx_gpio_count;
++
++	err = gpiochip_add(&bcm47xx_gpio_chip);
++	if (err)
++		panic("cannot add BCM47xx GPIO chip, error=%d", err);
+ }
+-EXPORT_SYMBOL(gpio_free);
++
++int gpio_get_value(unsigned gpio)
++{
++	if (gpio < bcm47xx_gpio_count)
++		return bcm47xx_gpio_in(1 << gpio);
++
++	return __gpio_get_value(gpio);
++}
++EXPORT_SYMBOL(gpio_get_value);
++
++void gpio_set_value(unsigned gpio, int value)
++{
++	if (gpio < bcm47xx_gpio_count)
++		bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
++	else
++		__gpio_set_value(gpio, value);
++}
++EXPORT_SYMBOL(gpio_set_value);
+ 
+ int gpio_to_irq(unsigned gpio)
+ {
+@@ -99,4 +216,11 @@ int gpio_to_irq(unsigned gpio)
+ 	}
+ 	return -EINVAL;
+ }
+-EXPORT_SYMBOL_GPL(gpio_to_irq);
++EXPORT_SYMBOL(gpio_to_irq);
++
++int irq_to_gpio(unsigned irq)
++{
++	/* FIXME */
++	return -EINVAL;
++}
++EXPORT_SYMBOL(irq_to_gpio);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -344,6 +344,8 @@ void __init plat_mem_setup(void)
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;
+ 	pm_power_off = bcm47xx_machine_halt;
++
++	bcm47xx_gpio_init();
+ }
+ 
+ static int __init bcm47xx_register_bus_complete(void)
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ b/arch/mips/bcm47xx/wgt634u.c
+@@ -133,6 +133,7 @@ static int __init wgt634u_init(void)
+ 	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+ 	 */
+ 	u8 *et0mac;
++	int err;
+ 
+ 	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+ 		return -ENODEV;
+@@ -146,6 +147,12 @@ static int __init wgt634u_init(void)
+ 
+ 		printk(KERN_INFO "WGT634U machine detected.\n");
+ 
++		err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
++		if (err) {
++			printk(KERN_INFO "Can not register gpio fir reset button\n");
++			return 0;
++		}
++
+ 		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+ 				 gpio_interrupt, IRQF_SHARED,
+ 				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+@@ -56,4 +56,6 @@ void bcm47xx_fill_bcma_boardinfo(struct
+ 				 const char *prefix);
+ #endif
+ 
++void bcm47xx_gpio_init(void);
++
+ #endif /* __ASM_BCM47XX_H */
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -4,152 +4,39 @@
+  * for more details.
+  *
+  * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+  */
+ 
+ #ifndef __BCM47XX_GPIO_H
+ #define __BCM47XX_GPIO_H
+ 
+-#include <linux/ssb/ssb_embedded.h>
+-#include <linux/bcma/bcma.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-
+-#define BCM47XX_EXTIF_GPIO_LINES	5
+-#define BCM47XX_CHIPCO_GPIO_LINES	16
+-
+-extern int gpio_request(unsigned gpio, const char *label);
+-extern void gpio_free(unsigned gpio);
+-extern int gpio_to_irq(unsigned gpio);
++#define ARCH_NR_GPIOS	64
++#include <asm-generic/gpio.h>
+ 
+-static inline int gpio_get_value(unsigned gpio)
+-{
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
+-					   1 << gpio);
+-#endif
+-	}
+-	return -EINVAL;
+-}
+-
+-#define gpio_get_value_cansleep	gpio_get_value
+-
+-static inline void gpio_set_value(unsigned gpio, int value)
+-{
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+-			     value ? 1 << gpio : 0);
+-		return;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+-				     value ? 1 << gpio : 0);
+-		return;
+-#endif
+-	}
+-}
+-
+-#define gpio_set_value_cansleep gpio_set_value
+-
+-static inline int gpio_cansleep(unsigned gpio)
+-{
+-	return 0;
+-}
++/* low level BCM47xx gpio api */
++u32 bcm47xx_gpio_in(u32 mask);
++u32 bcm47xx_gpio_out(u32 mask, u32 value);
++u32 bcm47xx_gpio_outen(u32 mask, u32 value);
++u32 bcm47xx_gpio_control(u32 mask, u32 value);
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value);
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value);
+ 
+-static inline int gpio_is_valid(unsigned gpio)
+-{
+-	return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+-}
++int gpio_to_irq(unsigned gpio);
++int irq_to_gpio(unsigned irq);
++int gpio_get_value(unsigned gpio);
++void gpio_set_value(unsigned gpio, int value);
+ 
+-
+-static inline int gpio_direction_input(unsigned gpio)
++static inline void gpio_intmask(unsigned gpio, int value)
+ {
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+-		return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+-				       0);
+-		return 0;
+-#endif
+-	}
+-	return -EINVAL;
++	bcm47xx_gpio_intmask(1 << gpio, value ? 1 << gpio : 0);
+ }
+ 
+-static inline int gpio_direction_output(unsigned gpio, int value)
++static inline void gpio_polarity(unsigned gpio, int value)
+ {
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		/* first set the gpio out value */
+-		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+-			     value ? 1 << gpio : 0);
+-		/* then set the gpio mode */
+-		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+-		return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		/* first set the gpio out value */
+-		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+-				     value ? 1 << gpio : 0);
+-		/* then set the gpio mode */
+-		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+-				       1 << gpio);
+-		return 0;
+-#endif
+-	}
+-	return -EINVAL;
++	bcm47xx_gpio_polarity(1 << gpio, value ? 1 << gpio : 0);
+ }
+ 
+-static inline int gpio_intmask(unsigned gpio, int value)
+-{
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
+-				 value ? 1 << gpio : 0);
+-		return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
+-					 1 << gpio, value ? 1 << gpio : 0);
+-		return 0;
+-#endif
+-	}
+-	return -EINVAL;
+-}
+-
+-static inline int gpio_polarity(unsigned gpio, int value)
+-{
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
+-				  value ? 1 << gpio : 0);
+-		return 0;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
+-					  1 << gpio, value ? 1 << gpio : 0);
+-		return 0;
+-#endif
+-	}
+-	return -EINVAL;
+-}
+ 
++#define gpio_cansleep	__gpio_cansleep
+ 
+ #endif /* __BCM47XX_GPIO_H */
diff --git a/target/linux/brcm47xx/patches-3.3/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.3/812-disable_wgt634u_crap.patch
index 76419e823c..6b44254017 100644
--- a/target/linux/brcm47xx/patches-3.3/812-disable_wgt634u_crap.patch
+++ b/target/linux/brcm47xx/patches-3.3/812-disable_wgt634u_crap.patch
@@ -7,7 +7,7 @@
 -obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
 --- a/arch/mips/bcm47xx/wgt634u.c
 +++ /dev/null
-@@ -1,170 +0,0 @@
+@@ -1,177 +0,0 @@
 -/*
 - * This file is subject to the terms and conditions of the GNU General Public
 - * License.  See the file "COPYING" in the main directory of this archive
@@ -143,6 +143,7 @@
 -	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
 -	 */
 -	u8 *et0mac;
+-	int err;
 -
 -	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
 -		return -ENODEV;
@@ -156,6 +157,12 @@
 -
 -		printk(KERN_INFO "WGT634U machine detected.\n");
 -
+-		err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
+-		if (err) {
+-			printk(KERN_INFO "Can not register gpio fir reset button\n");
+-			return 0;
+-		}
+-
 -		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
 -				 gpio_interrupt, IRQF_SHARED,
 -				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {