update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10137 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 36 insertions, 15 deletions

diff --git a/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h b/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h
index 7a44e5fbaa..f609f3c2eb 100644
--- a/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h
+++ b/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbconfig.h
@@ -1,7 +1,7 @@
 /*
  * Broadcom SiliconBackplane hardware register definitions.
  *
- * Copyright 2006, Broadcom Corporation
+ * Copyright 2007, Broadcom Corporation
  * All Rights Reserved.
  * 
  * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
@@ -9,11 +9,12 @@
  * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  *
- * $Id: sbconfig.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $
+ * $Id$
  */
 
 #ifndef	_SBCONFIG_H
 #define	_SBCONFIG_H
+#include "linuxver.h"
 
 /* cpp contortions to concatenate w/arg prescan */
 #ifndef PAD
@@ -36,13 +37,13 @@
 
 #define	SB_FLASH2		0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
 #define	SB_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
-
 #define	SB_EXTIF_BASE		0x1f000000	/* External Interface region base address */
+#define	SB_ARMCM3_ROM		0x1e000000	/* ARM Cortex-M3 ROM */
 #define	SB_FLASH1		0x1fc00000	/* MIPS Flash Region 1 */
 #define	SB_FLASH1_SZ		0x00400000	/* MIPS Size of Flash Region 1 */
-
-#define	SB_ROM			0x20000000	/* ARM ROM */
-#define	SB_SRAM2		0x80000000	/* ARM SRAM Region 2 */
+#define	SB_ARM7S_ROM		0x20000000	/* ARM7TDMI-S ROM */
+#define	SB_ARMCM3_SRAM2		0x60000000	/* ARM Cortex-M3 SRAM Region 2 */
+#define	SB_ARM7S_SRAM2		0x80000000	/* ARM7TDMI-S SRAM Region 2 */
 #define	SB_ARM_FLASH1		0xffff0000	/* ARM Flash Region 1 */
 #define	SB_ARM_FLASH1_SZ	0x00010000	/* ARM Size of Flash Region 1 */
 
@@ -196,7 +197,7 @@ typedef volatile struct _sbconfig {
 #define	SBTMH_INT		0x2		/* interrupt */
 #define	SBTMH_BUSY		0x4		/* busy */
 #define	SBTMH_TO		0x00000020	/* timeout (sonics >= 2.3) */
-#define	SBTMH_FL_MASK		0x1fff0000	/* core-specific flags */
+#define	SBTMH_FL_MASK		0x0fff0000	/* core-specific flags */
 #define SBTMH_DMA64		0x10000000      /* supports DMA with 64-bit addresses */
 #define	SBTMH_GCR		0x20000000	/* gated clock request */
 #define	SBTMH_BISTF		0x40000000	/* bist failed */
@@ -323,7 +324,6 @@ typedef volatile struct _sbconfig {
 #define	SB_ILINE100		0x80a		/* iline100 core */
 #define	SB_IPSEC		0x80b		/* ipsec core */
 #define	SB_PCMCIA		0x80d		/* pcmcia core */
-#define SB_SDIOD		SB_PCMCIA	/* pcmcia core has sdio device */
 #define	SB_SOCRAM		0x80e		/* internal memory core */
 #define	SB_MEMC			0x80f		/* memc sdram core */
 #define	SB_EXTIF		0x811		/* external interface core */
@@ -342,11 +342,32 @@ typedef volatile struct _sbconfig {
 #define	SB_MIMO			0x821		/* MIMO phy core */
 #define	SB_SRAMC		0x822		/* SRAM controller core */
 #define	SB_MINIMAC		0x823		/* MINI MAC/phy core */
-#define	SB_ARM11		0x824		/* ARM 1176 core */
-#define	SB_ARM7			0x825		/* ARM 7tdmi core */
+#define	SB_ARM7S		0x825		/* ARM7tdmi-s core */
+#define SB_SDIOD		0x829		/* SDIO device core */
+#define SB_ARMCM3		0x82a		/* ARM Cortex M3 core */
+#define SB_OCP			0x830		/* OCP2OCP bridge core */
+#define SB_SC			0x831		/* shared common core */
+#define SB_AHB			0x832		/* OCP2AHB bridge core */
 
 #define	SB_CC_IDX		0		/* chipc, when present, is always core 0 */
 
+/* Not an enumeration space register, but common to all cores to
+ * communicate w/PMU regarding Silicon Backplane clocking.
+ */
+#define SB_CLK_CTL_ST		0x1e0		/* clock control and status */
+
+/* clk_ctl_st register */
+#define	CCS_FORCEALP		0x00000001	/* force ALP request */
+#define	CCS_FORCEHT		0x00000002	/* force HT request */
+#define	CCS_FORCEILP		0x00000004	/* force ILP request */
+#define	CCS_ALPAREQ		0x00000008	/* ALP Avail Request */
+#define	CCS_HTAREQ		0x00000010	/* HT Avail Request */
+#define	CCS_FORCEHWREQOFF	0x00000020	/* Force HW Clock Request Off */
+#define	CCS_ALPAVAIL		0x00010000	/* ALP is available */
+#define	CCS_HTAVAIL		0x00020000	/* HT is available */
+#define	CCS0_HTAVAIL		0x00010000	/* HT avail in chipc and pcmcia on 4328a0 */
+#define	CCS0_ALPAVAIL		0x00020000	/* ALP avail in chipc and pcmcia on 4328a0 */
+
 /* Not really related to Silicon Backplane, but a couple of software
  * conventions for the use the flash space:
  */
@@ -359,11 +380,11 @@ typedef volatile struct _sbconfig {
 #define	BISZ_MAGIC		0x4249535a	/* Marked with this value: 'BISZ' */
 #define	BISZ_MAGIC_IDX		0		/* Word 0: magic */
 #define	BISZ_TXTST_IDX		1		/*	1: text start */
-#define	BISZ_TXTEND_IDX		2		/*	2: text start */
-#define	BISZ_DATAST_IDX		3		/*	3: text start */
-#define	BISZ_DATAEND_IDX	4		/*	4: text start */
-#define	BISZ_BSSST_IDX		5		/*	5: text start */
-#define	BISZ_BSSEND_IDX		6		/*	6: text start */
+#define	BISZ_TXTEND_IDX		2		/*	2: text end */
+#define	BISZ_DATAST_IDX		3		/*	3: data start */
+#define	BISZ_DATAEND_IDX	4		/*	4: data end */
+#define	BISZ_BSSST_IDX		5		/*	5: bss start */
+#define	BISZ_BSSEND_IDX		6		/*	6: bss end */
 #define BISZ_SIZE		7		/* descriptor size in 32-bit intergers */
 
 #endif	/* _SBCONFIG_H */