diff options
| author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-01-22 22:38:19 +0000 |
|---|---|---|
| committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2012-01-22 22:38:19 +0000 |
| commit | e0b80e41eb0b24e76285b9355725d2f4f66ada50 (patch) | |
| tree | dccbb34ba7bd86e0b13abd8226004f09f5766847 /target/linux/ar71xx | |
| parent | 22b99f32a13348502bc0f33b93b70565e941d99c (diff) | |
ar71xx: add initial support for 3.2
Tested on the following boards:
ALFA AP96
TL-MR3220 v1
TL-WR1043ND v1
TL-WR2543ND v1
TL-WR703N v1
TL-WR741ND v1
TL-WR741ND v4
WNDR3700 v1
WZR-HP-G300NH
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar71xx')
200 files changed, 25484 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-3.2 b/target/linux/ar71xx/config-3.2 new file mode 100644 index 0000000000..8f220c5220 --- /dev/null +++ b/target/linux/ar71xx/config-3.2 @@ -0,0 +1,218 @@ +CONFIG_AG71XX=y +CONFIG_AG71XX_AR8216_SUPPORT=y +# CONFIG_AG71XX_DEBUG is not set +# CONFIG_AG71XX_DEBUG_FS is not set +CONFIG_AR8216_PHY=y +# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ATH79=y +CONFIG_ATH79_DEV_AP9X_PCI=y +CONFIG_ATH79_DEV_DSA=y +CONFIG_ATH79_DEV_ETH=y +CONFIG_ATH79_DEV_GPIO_BUTTONS=y +CONFIG_ATH79_DEV_LEDS_GPIO=y +CONFIG_ATH79_DEV_M25P80=y +CONFIG_ATH79_DEV_SPI=y +CONFIG_ATH79_DEV_USB=y +CONFIG_ATH79_DEV_WMAC=y +CONFIG_ATH79_MACH_ALFA_AP96=y +CONFIG_ATH79_MACH_ALFA_NX=y +CONFIG_ATH79_MACH_ALL0258N=y +CONFIG_ATH79_MACH_AP121=y +CONFIG_ATH79_MACH_AP81=y +CONFIG_ATH79_MACH_AP83=y +CONFIG_ATH79_MACH_AP96=y +CONFIG_ATH79_MACH_AW_NR580=y +CONFIG_ATH79_MACH_DB120=y +CONFIG_ATH79_MACH_DIR_600_A1=y +CONFIG_ATH79_MACH_DIR_615_C1=y +CONFIG_ATH79_MACH_DIR_825_B1=y +CONFIG_ATH79_MACH_EAP7660D=y +CONFIG_ATH79_MACH_HORNET_UB=y +CONFIG_ATH79_MACH_JA76PF=y +CONFIG_ATH79_MACH_JWAP003=y +CONFIG_ATH79_MACH_MZK_W04NU=y +CONFIG_ATH79_MACH_MZK_W300NH=y +CONFIG_ATH79_MACH_NBG460N=y +CONFIG_ATH79_MACH_OM2P=y +CONFIG_ATH79_MACH_PB42=y +CONFIG_ATH79_MACH_PB44=y +CONFIG_ATH79_MACH_PB92=y +CONFIG_ATH79_MACH_RB4XX=y +CONFIG_ATH79_MACH_RB750=y +CONFIG_ATH79_MACH_RW2458N=y +CONFIG_ATH79_MACH_TEW_632BRP=y +CONFIG_ATH79_MACH_TL_MR3020=y +CONFIG_ATH79_MACH_TL_MR3X20=y +CONFIG_ATH79_MACH_TL_WA901ND=y +CONFIG_ATH79_MACH_TL_WA901ND_V2=y +CONFIG_ATH79_MACH_TL_WR1043ND=y +CONFIG_ATH79_MACH_TL_WR2543N=y +CONFIG_ATH79_MACH_TL_WR703N=y +CONFIG_ATH79_MACH_TL_WR741ND=y +CONFIG_ATH79_MACH_TL_WR741ND_V4=y +CONFIG_ATH79_MACH_TL_WR841N_V1=y +CONFIG_ATH79_MACH_TL_WR941ND=y +CONFIG_ATH79_MACH_UBNT=y +CONFIG_ATH79_MACH_UBNT_XM=y +CONFIG_ATH79_MACH_WHR_HP_G300N=y +CONFIG_ATH79_MACH_WNDR3700=y +CONFIG_ATH79_MACH_WNR2000=y +CONFIG_ATH79_MACH_WP543=y +CONFIG_ATH79_MACH_WRT160NL=y +CONFIG_ATH79_MACH_WRT400N=y +CONFIG_ATH79_MACH_WZR_HP_AG300H=y +CONFIG_ATH79_MACH_WZR_HP_G300NH=y +CONFIG_ATH79_MACH_WZR_HP_G300NH2=y +CONFIG_ATH79_MACH_WZR_HP_G450H=y +CONFIG_ATH79_MACH_ZCN_1523H=y +CONFIG_ATH79_NVRAM=y +CONFIG_ATH79_PCI_ATH9K_FIXUP=y +# CONFIG_ATH79_WDT is not set +CONFIG_BCMA_POSSIBLE=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_NXP_74HC153=y +CONFIG_GPIO_PCF857X=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_GPIO=y +# CONFIG_I2C_PXA_PCI is not set +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_SOURCE="../../root" +CONFIG_IP17XX_PHY=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_FORCED_THREADING=y +# CONFIG_LANTIQ is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_RB750 is not set +# CONFIG_LEDS_WNDR3700_USB is not set +# CONFIG_M25PXX_USE_FAST_READ is not set +CONFIG_MARVELL_PHY=y +CONFIG_MICREL_PHY=y +# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set +CONFIG_MIPS=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MLX4_CORE is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_TPLINK_PARTS=y +CONFIG_MTD_WRT160NL_PARTS=y +CONFIG_MYLOADER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6063=y +CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_AR724X=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_QUOTACTL is not set +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367_PHY=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_AR933X=y +CONFIG_SERIAL_AR933X_CONSOLE=y +CONFIG_SERIAL_AR933X_NR_UARTS=2 +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_AR71XX=y +CONFIG_SOC_AR724X=y +CONFIG_SOC_AR913X=y +CONFIG_SOC_AR933X=y +CONFIG_SOC_AR934X=y +CONFIG_SPI=y +CONFIG_SPI_AP83=y +CONFIG_SPI_ATH79=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +# CONFIG_SPI_RB4XX is not set +# CONFIG_SPI_RB4XX_CPLD is not set +# CONFIG_SPI_VSC7385 is not set +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_USB_ARCH_HAS_XHCI=y +CONFIG_USB_SUPPORT=y +CONFIG_XZ_DEC=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c new file mode 100644 index 0000000000..1b08254861 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c @@ -0,0 +1,141 @@ +/* + * Atheros AP9X reference board PCI initialization + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/ath9k_platform.h> +#include <linux/delay.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/pci.h> + +#include "dev-ap9x-pci.h" +#include "pci-ath9k-fixup.h" +#include "pci.h" + +static struct ath9k_platform_data ap9x_wmac0_data = { + .led_pin = -1, +}; +static struct ath9k_platform_data ap9x_wmac1_data = { + .led_pin = -1, +}; +static char ap9x_wmac0_mac[6]; +static char ap9x_wmac1_mac[6]; + +__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) +{ + switch (wmac) { + case 0: + ap9x_wmac0_data.led_pin = pin; + break; + case 1: + ap9x_wmac1_data.led_pin = pin; + break; + } +} + +__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) +{ + switch (wmac) { + case 0: + ap9x_wmac0_data.gpio_mask = mask; + ap9x_wmac0_data.gpio_val = val; + break; + case 1: + ap9x_wmac1_data.gpio_mask = mask; + ap9x_wmac1_data.gpio_val = val; + break; + } +} + +__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds, + int num_leds) +{ + switch (wmac) { + case 0: + ap9x_wmac0_data.leds = leds; + ap9x_wmac0_data.num_leds = num_leds; + break; + case 1: + ap9x_wmac1_data.leds = leds; + ap9x_wmac1_data.num_leds = num_leds; + break; + } +} + +static int ap91_pci_plat_dev_init(struct pci_dev *dev) +{ + switch (PCI_SLOT(dev->devfn)) { + case 0: + dev->dev.platform_data = &ap9x_wmac0_data; + break; + } + + return 0; +} + +__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr) +{ + if (cal_data) + memcpy(ap9x_wmac0_data.eeprom_data, cal_data, + sizeof(ap9x_wmac0_data.eeprom_data)); + + if (mac_addr) { + memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac)); + ap9x_wmac0_data.macaddr = ap9x_wmac0_mac; + } + + ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init); + ath79_register_pci(); + + pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data); +} + +static int ap94_pci_plat_dev_init(struct pci_dev *dev) +{ + switch (PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &ap9x_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &ap9x_wmac1_data; + break; + } + + return 0; +} + +__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) +{ + if (cal_data0) + memcpy(ap9x_wmac0_data.eeprom_data, cal_data0, + sizeof(ap9x_wmac0_data.eeprom_data)); + + if (cal_data1) + memcpy(ap9x_wmac1_data.eeprom_data, cal_data1, + sizeof(ap9x_wmac1_data.eeprom_data)); + + if (mac_addr0) { + memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac)); + ap9x_wmac0_data.macaddr = ap9x_wmac0_mac; + } + + if (mac_addr1) { + memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac)); + ap9x_wmac1_data.macaddr = ap9x_wmac1_mac; + } + + ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init); + ath79_register_pci(); + + pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data); + pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data); +} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h new file mode 100644 index 0000000000..c7f1bb9ec2 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h @@ -0,0 +1,40 @@ +/* + * Atheros AP9X reference board PCI initialization + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_DEV_AP9X_PCI_H +#define _ATH79_DEV_AP9X_PCI_H + +struct gpio_led; + +#if defined(CONFIG_ATH79_DEV_AP9X_PCI) +void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin); +void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val); +void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds, + int num_leds); + +void ap91_pci_init(u8 *cal_data, u8 *mac_addr); +void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1); + +#else +static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {} +static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac, + u32 mask, u32 val) {} +static inline void ap9x_pci_setup_wmac_leds(unsigned wmac, + struct gpio_led *leds, + int num_leds) {} + +static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {} +static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) {} +#endif + +#endif /* _ATH79_DEV_AP9X_PCI_H */ + diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c new file mode 100644 index 0000000000..1764147386 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c @@ -0,0 +1,36 @@ +/* + * Atheros AR71xx DSA switch device support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-dsa.h" + +static struct platform_device ar71xx_dsa_switch_device = { + .name = "dsa", + .id = 0, +}; + +void __init ath79_register_dsa(struct device *netdev, + struct device *miidev, + struct dsa_platform_data *d) +{ + int i; + + d->netdev = netdev; + for (i = 0; i < d->nr_chips; i++) + d->chip[i].mii_bus = miidev; + + ar71xx_dsa_switch_device.dev.platform_data = d; + platform_device_register(&ar71xx_dsa_switch_device); +} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h new file mode 100644 index 0000000000..3730202e8d --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h @@ -0,0 +1,21 @@ +/* + * Atheros AR71xx DSA switch device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_DEV_DSA_H +#define _ATH79_DEV_DSA_H + +#include <net/dsa.h> + +void ath79_register_dsa(struct device *netdev, + struct device *miidev, + struct dsa_platform_data *d); + +#endif /* _ATH79_DEV_DSA_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c new file mode 100644 index 0000000000..27c8a40b60 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c @@ -0,0 +1,971 @@ +/* + * Atheros AR71xx SoC platform devices + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros 2.6.15 BSP + * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/irq.h> + +#include "common.h" +#include "dev-eth.h" + +unsigned char ath79_mac_base[ETH_ALEN] __initdata; + +static struct resource ath79_mdio0_resources[] = { + { + .name = "mdio_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE0_BASE, + .end = AR71XX_GE0_BASE + 0x200 - 1, + } +}; + +static struct ag71xx_mdio_platform_data ath79_mdio0_data; + +struct platform_device ath79_mdio0_device = { + .name = "ag71xx-mdio", + .id = 0, + .resource = ath79_mdio0_resources, + .num_resources = ARRAY_SIZE(ath79_mdio0_resources), + .dev = { + .platform_data = &ath79_mdio0_data, + }, +}; + +static struct resource ath79_mdio1_resources[] = { + { + .name = "mdio_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE1_BASE, + .end = AR71XX_GE1_BASE + 0x200 - 1, + } +}; + +static struct ag71xx_mdio_platform_data ath79_mdio1_data; + +struct platform_device ath79_mdio1_device = { + .name = "ag71xx-mdio", + .id = 1, + .resource = ath79_mdio1_resources, + .num_resources = ARRAY_SIZE(ath79_mdio1_resources), + .dev = { + .platform_data = &ath79_mdio1_data, + }, +}; + +static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) +{ + void __iomem *base; + u32 t; + + base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); + + t = __raw_readl(base + cfg_reg); + t &= ~(3 << shift); + t |= (2 << shift); + __raw_writel(t, base + cfg_reg); + udelay(100); + + __raw_writel(pll_val, base + pll_reg); + + t |= (3 << shift); + __raw_writel(t, base + cfg_reg); + udelay(100); + + t &= ~(3 << shift); + __raw_writel(t, base + cfg_reg); + udelay(100); + + printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", + (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); + + iounmap(base); +} + +static void __init ath79_mii_ctrl_set_if(unsigned int reg, + unsigned int mii_if) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); + + t = __raw_readl(base + reg); + t &= ~(AR71XX_MII_CTRL_IF_MASK); + t |= (mii_if & AR71XX_MII_CTRL_IF_MASK); + __raw_writel(t, base + reg); + + iounmap(base); +} + +static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed) +{ + void __iomem *base; + unsigned int mii_speed; + u32 t; + + switch (speed) { + case SPEED_10: + mii_speed = AR71XX_MII_CTRL_SPEED_10; + break; + case SPEED_100: + mii_speed = AR71XX_MII_CTRL_SPEED_100; + break; + case SPEED_1000: + mii_speed = AR71XX_MII_CTRL_SPEED_1000; + break; + default: + BUG(); + } + + base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); + + t = __raw_readl(base + reg); + t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT); + t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT; + __raw_writel(t, base + reg); + + iounmap(base); +} + +void __init ath79_register_mdio(unsigned int id, u32 phy_mask) +{ + struct platform_device *mdio_dev; + struct ag71xx_mdio_platform_data *mdio_data; + unsigned int max_id; + + if (ath79_soc == ATH79_SOC_AR9341 || + ath79_soc == ATH79_SOC_AR9342 || + ath79_soc == ATH79_SOC_AR9344) + max_id = 1; + else + max_id = 0; + + if (id > max_id) { + printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id); + return; + } + + switch (ath79_soc) { + case ATH79_SOC_AR7241: + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + mdio_dev = &ath79_mdio1_device; + mdio_data = &ath79_mdio1_data; + break; + + case ATH79_SOC_AR9341: + case ATH79_SOC_AR9342: + case ATH79_SOC_AR9344: + if (id == 0) { + mdio_dev = &ath79_mdio0_device; + mdio_data = &ath79_mdio0_data; + } else { + mdio_dev = &ath79_mdio1_device; + mdio_data = &ath79_mdio1_data; + } + break; + + case ATH79_SOC_AR7242: + ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, + AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000, + AR71XX_ETH0_PLL_SHIFT); + /* fall through */ + default: + mdio_dev = &ath79_mdio0_device; + mdio_data = &ath79_mdio0_data; + break; + } + + mdio_data->phy_mask = phy_mask; + + switch (ath79_soc) { + case ATH79_SOC_AR7240: + case ATH79_SOC_AR7241: + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + mdio_data->is_ar7240 = 1; + break; + + case ATH79_SOC_AR9341: + case ATH79_SOC_AR9342: + case ATH79_SOC_AR9344: + if (id == 1) + mdio_data->is_ar7240 = 1; + break; + + default: + break; + } + + platform_device_register(mdio_dev); +} + +struct ath79_eth_pll_data ath79_eth0_pll_data; +struct ath79_eth_pll_data ath79_eth1_pll_data; + +static u32 ath79_get_eth_pll(unsigned int mac, int speed) +{ + struct ath79_eth_pll_data *pll_data; + u32 pll_val; + + switch (mac) { + case 0: + pll_data = &ath79_eth0_pll_data; + break; + case 1: + pll_data = &ath79_eth1_pll_data; + break; + default: + BUG(); + } + + switch (speed) { + case SPEED_10: + pll_val = pll_data->pll_10; + break; + case SPEED_100: + pll_val = pll_data->pll_100; + break; + case SPEED_1000: + pll_val = pll_data->pll_1000; + break; + default: + BUG(); + } + + return pll_val; +} + +static void ath79_set_speed_ge0(int speed) +{ + u32 val = ath79_get_eth_pll(0, speed); + + ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK, + val, AR71XX_ETH0_PLL_SHIFT); + ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed); +} + +static void ath79_set_speed_ge1(int speed) +{ + u32 val = ath79_get_eth_pll(1, speed); + + ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK, + val, AR71XX_ETH1_PLL_SHIFT); + ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed); +} + +static void ar724x_set_speed_ge0(int speed) +{ + /* TODO */ +} + +static void ar724x_set_speed_ge1(int speed) +{ + /* TODO */ +} + +static void ar7242_set_speed_ge0(int speed) +{ + u32 val = ath79_get_eth_pll(0, speed); + void __iomem *base; + + base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); + __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK); + iounmap(base); +} + +static void ar91xx_set_speed_ge0(int speed) +{ + u32 val = ath79_get_eth_pll(0, speed); + + ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK, + val, AR913X_ETH0_PLL_SHIFT); + ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed); +} + +static void ar91xx_set_speed_ge1(int speed) +{ + u32 val = ath79_get_eth_pll(1, speed); + + ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK, + val, AR913X_ETH1_PLL_SHIFT); + ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed); +} + +static void ar933x_set_speed_ge0(int speed) +{ + /* TODO */ +} + +static void ar933x_set_speed_ge1(int speed) +{ + /* TODO */ +} + +static void ar934x_set_speed_ge0(int speed) +{ + /* TODO */ +} + +static void ar934x_set_speed_ge1(int speed) +{ + /* TODO */ +} + +static void ath79_ddr_flush_ge0(void) +{ + ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0); +} + +static void ath79_ddr_flush_ge1(void) +{ + ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1); +} + +static void ar724x_ddr_flush_ge0(void) +{ + ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0); +} + +static void ar724x_ddr_flush_ge1(void) +{ + ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1); +} + +static void ar91xx_ddr_flush_ge0(void) +{ + ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0); +} + +static void ar91xx_ddr_flush_ge1(void) +{ + ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1); +} + +static void ar933x_ddr_flush_ge0(void) +{ + ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0); +} + +static void ar933x_ddr_flush_ge1(void) +{ + ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1); +} + +static void ar934x_ddr_flush_ge0(void) +{ + ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE0); +} + +static void ar934x_ddr_flush_ge1(void) +{ + ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE1); +} + +static struct resource ath79_eth0_resources[] = { + { + .name = "mac_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE0_BASE, + .end = AR71XX_GE0_BASE + 0x200 - 1, + }, { + .name = "mac_irq", + .flags = IORESOURCE_IRQ, + .start = ATH79_CPU_IRQ_GE0, + .end = ATH79_CPU_IRQ_GE0, + }, +}; + +struct ag71xx_platform_data ath79_eth0_data = { + .reset_bit = AR71XX_RESET_GE0_MAC, +}; + +struct platform_device ath79_eth0_device = { + .name = "ag71xx", + .id = 0, + .resource = ath79_eth0_resources, + .num_resources = ARRAY_SIZE(ath79_eth0_resources), + .dev = { + .platform_data = &ath79_eth0_data, + }, +}; + +static struct resource ath79_eth1_resources[] = { + { + .name = "mac_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE1_BASE, + .end = AR71XX_GE1_BASE + 0x200 - 1, + }, { + .name = "mac_irq", + .flags = IORESOURCE_IRQ, + .start = ATH79_CPU_IRQ_GE1, + .end = ATH79_CPU_IRQ_GE1, + }, +}; + +struct ag71xx_platform_data ath79_eth1_data = { + .reset_bit = AR71XX_RESET_GE1_MAC, +}; + +struct platform_device ath79_eth1_device = { + .name = "ag71xx", + .id = 1, + .resource = ath79_eth1_resources, + .num_resources = ARRAY_SIZE(ath79_eth1_resources), + .dev = { + .platform_data = &ath79_eth1_data, + }, +}; + +struct ag71xx_switch_platform_data ath79_switch_data; + +#define AR71XX_PLL_VAL_1000 0x00110000 +#define AR71XX_PLL_VAL_100 0x00001099 +#define AR71XX_PLL_VAL_10 0x00991099 + +#define AR724X_PLL_VAL_1000 0x00110000 +#define AR724X_PLL_VAL_100 0x00001099 +#define AR724X_PLL_VAL_10 0x00991099 + +#define AR7242_PLL_VAL_1000 0x16000000 +#define AR7242_PLL_VAL_100 0x00000101 +#define AR7242_PLL_VAL_10 0x00001616 + +#define AR913X_PLL_VAL_1000 0x1a000000 +#define AR913X_PLL_VAL_100 0x13000a44 +#define AR913X_PLL_VAL_10 0x00441099 + +#define AR933X_PLL_VAL_1000 0x00110000 +#define AR933X_PLL_VAL_100 0x00001099 +#define AR933X_PLL_VAL_10 0x00991099 + +#define AR934X_PLL_VAL_1000 0x00110000 +#define AR934X_PLL_VAL_100 0x00001099 +#define AR934X_PLL_VAL_10 0x00991099 + +static void __init ath79_init_eth_pll_data(unsigned int id) +{ + struct ath79_eth_pll_data *pll_data; + u32 pll_10, pll_100, pll_1000; + + switch (id) { + case 0: + pll_data = &ath79_eth0_pll_data; + break; + case 1: + pll_data = &ath79_eth1_pll_data; + break; + default: + BUG(); + } + + switch (ath79_soc) { + case ATH79_SOC_AR7130: + case ATH79_SOC_AR7141: + case ATH79_SOC_AR7161: + pll_10 = AR71XX_PLL_VAL_10; + pll_100 = AR71XX_PLL_VAL_100; + pll_1000 = AR71XX_PLL_VAL_1000; + break; + + case ATH79_SOC_AR7240: + case ATH79_SOC_AR7241: + pll_10 = AR724X_PLL_VAL_10; + pll_100 = AR724X_PLL_VAL_100; + pll_1000 = AR724X_PLL_VAL_1000; + break; + + case ATH79_SOC_AR7242: + pll_10 = AR7242_PLL_VAL_10; + pll_100 = AR7242_PLL_VAL_100; + pll_1000 = AR7242_PLL_VAL_1000; + break; + + case ATH79_SOC_AR9130: + case ATH79_SOC_AR9132: + pll_10 = AR913X_PLL_VAL_10; + pll_100 = AR913X_PLL_VAL_100; + pll_1000 = AR913X_PLL_VAL_1000; + break; + + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + pll_10 = AR933X_PLL_VAL_10; + pll_100 = AR933X_PLL_VAL_100; + pll_1000 = AR933X_PLL_VAL_1000; + break; + + case ATH79_SOC_AR9341: + case ATH79_SOC_AR9342: + case ATH79_SOC_AR9344: + pll_10 = AR934X_PLL_VAL_10; + pll_100 = AR934X_PLL_VAL_100; + pll_1000 = AR934X_PLL_VAL_1000; + break; + + default: + BUG(); + } + + if (!pll_data->pll_10) + pll_data->pll_10 = pll_10; + + if (!pll_data->pll_100) + pll_data->pll_100 = pll_100; + + if (!pll_data->pll_1000) + pll_data->pll_1000 = pll_1000; +} + +static int __init ath79_setup_phy_if_mode(unsigned int id, + struct ag71xx_platform_data *pdata) +{ + unsigned int mii_if; + + switch (id) { + case 0: + switch (ath79_soc) { + case ATH79_SOC_AR7130: + case ATH79_SOC_AR7141: + case ATH79_SOC_AR7161: + case ATH79_SOC_AR9130: + case ATH79_SOC_AR9132: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_MII: + mii_if = AR71XX_MII0_CTRL_IF_MII; + break; + case PHY_INTERFACE_MODE_GMII: + mii_if = AR71XX_MII0_CTRL_IF_GMII; + break; + case PHY_INTERFACE_MODE_RGMII: + mii_if = AR71XX_MII0_CTRL_IF_RGMII; + break; + case PHY_INTERFACE_MODE_RMII: + mii_if = AR71XX_MII0_CTRL_IF_RMII; + break; + default: + return -EINVAL; + } + ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if); + break; + + case ATH79_SOC_AR7240: + case ATH79_SOC_AR7241: + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + pdata->phy_if_mode = PHY_INTERFACE_MODE_MII; + break; + + case ATH79_SOC_AR7242: + /* FIXME */ + + case ATH79_SOC_AR9341: + case ATH79_SOC_AR9342: + case ATH79_SOC_AR9344: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RMII: + break; + default: + return -EINVAL; + } + break; + + default: + BUG(); + } + break; + case 1: + switch (ath79_soc) { + case ATH79_SOC_AR7130: + case ATH79_SOC_AR7141: + case ATH79_SOC_AR7161: + case ATH79_SOC_AR9130: + case ATH79_SOC_AR9132: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_RMII: + mii_if = AR71XX_MII1_CTRL_IF_RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + mii_if = AR71XX_MII1_CTRL_IF_RGMII; + break; + default: + return -EINVAL; + } + ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if); + break; + + case ATH79_SOC_AR7240: + case ATH79_SOC_AR7241: + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII; + break; + + case ATH79_SOC_AR7242: + /* FIXME */ + + case ATH79_SOC_AR9341: + case ATH79_SOC_AR9342: + case ATH79_SOC_AR9344: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: + break; + default: + return -EINVAL; + } + break; + + default: + BUG(); + } + break; + } + + return 0; +} + +static int ath79_eth_instance __initdata; +void __init ath79_register_eth(unsigned int id) +{ + struct platform_device *pdev; + struct ag71xx_platform_data *pdata; + int err; + + if (id > 1) { + printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id); + return; + } + + ath79_init_eth_pll_data(id); + + if (id == 0) + pdev = &ath79_eth0_device; + else + pdev = &ath79_eth1_device; + + pdata = pdev->dev.platform_data; + + err = ath79_setup_phy_if_mode(id, pdata); + if (err) { + printk(KERN_ERR + "ar71xx: invalid PHY interface mode for GE%u\n", id); + return; + } + + switch (ath79_soc) { + case ATH79_SOC_AR7130: + if (id == 0) { + pdata->ddr_flush = ath79_ddr_flush_ge0; + pdata->set_speed = ath79_set_speed_ge0; + } else { + pdata->ddr_flush = ath79_ddr_flush_ge1; + pdata->set_speed = ath79_set_speed_ge1; + } + break; + + case ATH79_SOC_AR7141: + case ATH79_SOC_AR7161: + if (id == 0) { + pdata->ddr_flush = ath79_ddr_flush_ge0; + pdata->set_speed = ath79_set_speed_ge0; + } else { + pdata->ddr_flush = ath79_ddr_flush_ge1; + pdata->set_speed = ath79_set_speed_ge1; + } + pdata->has_gbit = 1; + break; + + case ATH79_SOC_AR7242: + if (id == 0) { + pdata->reset_bit |= AR724X_RESET_GE0_MDIO | + AR71XX_RESET_GE0_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge0; + pdata->set_speed = ar7242_set_speed_ge0; + } else { + pdata->reset_bit |= AR724X_RESET_GE1_MDIO | + AR71XX_RESET_GE1_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge1; + pdata->set_speed = ar724x_set_speed_ge1; + } + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + case ATH79_SOC_AR7241: + if (id == 0) + pdata->reset_bit |= AR724X_RESET_GE0_MDIO; + else + pdata->reset_bit |= AR724X_RESET_GE1_MDIO; + /* fall through */ + case ATH79_SOC_AR7240: + if (id == 0) { + pdata->reset_bit |= AR71XX_RESET_GE0_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge0; + pdata->set_speed = ar724x_set_speed_ge0; + + pdata->phy_mask = BIT(4); + } else { + pdata->reset_bit |= AR71XX_RESET_GE1_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge1; + pdata->set_speed = ar724x_set_speed_ge1; + + pdata->speed = SPEED_1000; + pdata->duplex = DUPLEX_FULL; + pdata->switch_data = &ath79_switch_data; + } + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + if (ath79_soc == ATH79_SOC_AR7240) + pdata->is_ar7240 = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + case ATH79_SOC_AR9130: + if (id == 0) { + pdata->ddr_flush = ar91xx_ddr_flush_ge0; + pdata->set_speed = ar91xx_set_speed_ge0; + } else { + pdata->ddr_flush = ar91xx_ddr_flush_ge1; + pdata->set_speed = ar91xx_set_speed_ge1; + } + pdata->is_ar91xx = 1; + break; + + case ATH79_SOC_AR9132: + if (id == 0) { + pdata->ddr_flush = ar91xx_ddr_flush_ge0; + pdata->set_speed = ar91xx_set_speed_ge0; + } else { + pdata->ddr_flush = ar91xx_ddr_flush_ge1; + pdata->set_speed = ar91xx_set_speed_ge1; + } + pdata->is_ar91xx = 1; + pdata->has_gbit = 1; + break; + + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + if (id == 0) { + pdata->reset_bit = AR933X_RESET_GE0_MAC | + AR933X_RESET_GE0_MDIO; + pdata->ddr_flush = ar933x_ddr_flush_ge0; + pdata->set_speed = ar933x_set_speed_ge0; + + pdata->phy_mask = BIT(4); + } else { + pdata->reset_bit = AR933X_RESET_GE1_MAC | + AR933X_RESET_GE1_MDIO; + pdata->ddr_flush = ar933x_ddr_flush_ge1; + pdata->set_speed = ar933x_set_speed_ge1; + + pdata->speed = SPEED_1000; + pdata->duplex = DUPLEX_FULL; + pdata->switch_data = &ath79_switch_data; + } + + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + case ATH79_SOC_AR9341: + case ATH79_SOC_AR9342: + case ATH79_SOC_AR9344: + if (id == 0) { + pdata->reset_bit = AR934X_RESET_GE0_MAC | + AR934X_RESET_GE0_MDIO; + pdata->ddr_flush =ar934x_ddr_flush_ge0; + pdata->set_speed = ar934x_set_speed_ge0; + } else { + pdata->reset_bit = AR934X_RESET_GE1_MAC | + AR934X_RESET_GE1_MDIO; + pdata->ddr_flush = ar934x_ddr_flush_ge1; + pdata->set_speed = ar934x_set_speed_ge1; + + pdata->switch_data = &ath79_switch_data; + } + + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + default: + BUG(); + } + + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_GMII: + case PHY_INTERFACE_MODE_RGMII: + if (!pdata->has_gbit) { + printk(KERN_ERR "ar71xx: no gbit available on eth%d\n", + id); + return; + } + /* fallthrough */ + default: + break; + } + + if (!is_valid_ether_addr(pdata->mac_addr)) { + random_ether_addr(pdata->mac_addr); + printk(KERN_DEBUG + "ar71xx: using random MAC address for eth%d\n", + ath79_eth_instance); + } + + if (pdata->mii_bus_dev == NULL) { + switch (ath79_soc) { + case ATH79_SOC_AR9341: + case ATH79_SOC_AR9342: + case ATH79_SOC_AR9344: + if (id == 0) + pdata->mii_bus_dev = &ath79_mdio0_device.dev; + else + pdata->mii_bus_dev = &ath79_mdio1_device.dev; + break; + + case ATH79_SOC_AR7241: + case ATH79_SOC_AR9330: + case ATH79_SOC_AR9331: + pdata->mii_bus_dev = &ath79_mdio1_device.dev; + break; + + default: + pdata->mii_bus_dev = &ath79_mdio0_device.dev; + break; + } + } + + /* Reset the device */ + ath79_device_reset_set(pdata->reset_bit); + mdelay(100); + + ath79_device_reset_clear(pdata->reset_bit); + mdelay(100); + + platform_device_register(pdev); + ath79_eth_instance++; +} + +void __init ath79_set_mac_base(unsigned char *mac) +{ + memcpy(ath79_mac_base, mac, ETH_ALEN); +} + +void __init ath79_parse_mac_addr(char *mac_str) +{ + u8 tmp[ETH_ALEN]; + int t; + + t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); + + if (t != ETH_ALEN) + t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx", + &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); + + if (t == ETH_ALEN) + ath79_set_mac_base(tmp); + else + printk(KERN_DEBUG "ar71xx: failed to parse mac address " + "\"%s\"\n", mac_str); +} + +static int __init ath79_ethaddr_setup(char *str) +{ + ath79_parse_mac_addr(str); + return 1; +} +__setup("ethaddr=", ath79_ethaddr_setup); + +static int __init ath79_kmac_setup(char *str) +{ + ath79_parse_mac_addr(str); + return 1; +} +__setup("kmac=", ath79_kmac_setup); + +void __init ath79_init_mac(unsigned char *dst, const unsigned char *src, + int offset) +{ + int t; + + if (!is_valid_ether_addr(src)) { + memset(dst, '\0', ETH_ALEN); + return; + } + + t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]); + t += offset; + + dst[0] = src[0]; + dst[1] = src[1]; + dst[2] = src[2]; + dst[3] = (t >> 16) & 0xff; + dst[4] = (t >> 8) & 0xff; + dst[5] = t & 0xff; +} + +void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src) +{ + int i; + + if (!is_valid_ether_addr(src)) { + memset(dst, '\0', ETH_ALEN); + return; + } + + for (i = 0; i < ETH_ALEN; i++) + dst[i] = src[i]; + dst[0] |= 0x02; +} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h new file mode 100644 index 0000000000..4c010ef74e --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h @@ -0,0 +1,46 @@ +/* + * Atheros AR71xx SoC device definitions + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_DEV_ETH_H +#define _ATH79_DEV_ETH_H + +#include <asm/mach-ath79/ag71xx_platform.h> + +struct platform_device; + +extern unsigned char ath79_mac_base[] __initdata; +void ath79_parse_mac_addr(char *mac_str); +void ath79_init_mac(unsigned char *dst, const unsigned char *src, + int offset); +void ath79_init_local_mac(unsigned char *dst, const unsigned char *src); + +struct ath79_eth_pll_data { + u32 pll_10; + u32 pll_100; + u32 pll_1000; +}; + +extern struct ath79_eth_pll_data ath79_eth0_pll_data; +extern struct ath79_eth_pll_data ath79_eth1_pll_data; + +extern struct ag71xx_platform_data ath79_eth0_data; +extern struct ag71xx_platform_data ath79_eth1_data; +extern struct platform_device ath79_eth0_device; +extern struct platform_device ath79_eth1_device; +void ath79_register_eth(unsigned int id); + +extern struct ag71xx_switch_platform_data ath79_switch_data; + +extern struct platform_device ath79_mdio0_device; +extern struct platform_device ath79_mdio1_device; +void ath79_register_mdio(unsigned int id, u32 phy_mask); + +#endif /* _ATH79_DEV_ETH_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c new file mode 100644 index 0000000000..9ac19d83ae --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/concat.h> + +#include "dev-spi.h" +#include "dev-m25p80.h" + +static struct ath79_spi_controller_data ath79_spi0_cdata = +{ + .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, + .cs_line = 0, +}; + +static struct ath79_spi_controller_data ath79_spi1_cdata = +{ + .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, + .cs_line = 1, +}; + +static struct spi_board_info ath79_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .controller_data = &ath79_spi0_cdata, + }, + { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .controller_data = &ath79_spi1_cdata, + } +}; + +static struct ath79_spi_platform_data ath79_spi_data; + +void __init ath79_register_m25p80(struct flash_platform_data *pdata) +{ + ath79_spi_data.bus_num = 0; + ath79_spi_data.num_chipselect = 1; + ath79_spi_info[0].platform_data = pdata; + ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1); +} + +static struct flash_platform_data *multi_pdata; + +static struct mtd_info *concat_devs[2] = { NULL, NULL }; +static struct work_struct mtd_concat_work; + +static void mtd_concat_add_work(struct work_struct *work) +{ + struct mtd_info *mtd; + + mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash"); + + mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts); +} + +static void mtd_concat_add(struct mtd_info *mtd) +{ + static bool registered = false; + + if (registered) + return; + + if (!strcmp(mtd->name, "spi0.0")) + concat_devs[0] = mtd; + else if (!strcmp(mtd->name, "spi0.1")) + concat_devs[1] = mtd; + else + return; + + if (!concat_devs[0] || !concat_devs[1]) + return; + + registered = true; + INIT_WORK(&mtd_concat_work, mtd_concat_add_work); + schedule_work(&mtd_concat_work); +} + +static void mtd_concat_remove(struct mtd_info *mtd) +{ +} + +static void add_mtd_concat_notifier(void) +{ + static struct mtd_notifier not = { + .add = mtd_concat_add, + .remove = mtd_concat_remove, + }; + + register_mtd_user(¬); +} + + +void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata) +{ + multi_pdata = pdata; + add_mtd_concat_notifier(); + ath79_spi_data.bus_num = 0; + ath79_spi_data.num_chipselect = 2; + ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2); +} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h new file mode 100644 index 0000000000..637b41a7d8 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_DEV_M25P80_H +#define _ATH79_DEV_M25P80_H + +#include <linux/spi/flash.h> + +void ath79_register_m25p80(struct flash_platform_data *pdata) __init; +void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init; + +#endif /* _ATH79_DEV_M25P80_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c new file mode 100644 index 0000000000..f7315a7493 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c @@ -0,0 +1,153 @@ +/* + * ALFA Network AP96 board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/spi/spi.h> +#include <linux/spi/mmc_spi.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +#define ALFA_AP96_GPIO_PCIE_RESET 2 +#define ALFA_AP96_GPIO_SIM_DETECT 3 +#define ALFA_AP96_GPIO_MICROSD_CD 4 +#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5 + +#define ALFA_AP96_GPIO_BUTTON_RESET 11 + +#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL) + +static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALFA_AP96_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static int alfa_ap96_mmc_get_cd(struct device *dev) +{ + return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD); +} + +static struct mmc_spi_platform_data alfa_ap96_mmc_data = { + .get_cd = alfa_ap96_mmc_get_cd, + .caps = MMC_CAP_NEEDS_POLL, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct ath79_spi_controller_data ap96_spi0_cdata = { + .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, + .cs_line = 0, +}; + +static struct ath79_spi_controller_data ap96_spi1_cdata = { + .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, + .cs_line = 1, +}; + +static struct ath79_spi_controller_data ap96_spi2_cdata = { + .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, + .cs_line = 2, +}; + +static struct spi_board_info alfa_ap96_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .controller_data = &ap96_spi0_cdata + }, { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "mmc_spi", + .platform_data = &alfa_ap96_mmc_data, + .controller_data = &ap96_spi1_cdata + }, { + .bus_num = 0, + .chip_select = 2, + .max_speed_hz = 6250000, + .modalias = "rtc-pcf2123", + .controller_data = &ap96_spi2_cdata + }, +}; + +static struct ath79_spi_platform_data alfa_ap96_spi_data = { + .bus_num = 0, + .num_chipselect = 3, +}; + +static void __init alfa_ap96_gpio_setup(void) +{ + ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | + AR71XX_GPIO_FUNC_SPI_CS2_EN); + + gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD"); + gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD); + gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset"); + gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1); + gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable"); + gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1); +} + +#define ALFA_AP96_WAN_PHYMASK BIT(4) +#define ALFA_AP96_LAN_PHYMASK BIT(5) +#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK) + +static void __init alfa_ap96_init(void) +{ + alfa_ap96_gpio_setup(); + + ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK; + ath79_eth1_pll_data.pll_1000 = 0x110000; + + ath79_register_eth(0); + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK; + ath79_eth1_pll_data.pll_1000 = 0x110000; + + ath79_register_eth(1); + + ath79_register_pci(); + ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info, + ARRAY_SIZE(alfa_ap96_spi_info)); + + ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL, + ARRAY_SIZE(alfa_ap96_gpio_keys), + alfa_ap96_gpio_keys); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96", + alfa_ap96_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c new file mode 100644 index 0000000000..d37e63fe12 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c @@ -0,0 +1,157 @@ +/* + * ALFA Network N2/N5 board support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define ALFA_NX_GPIO_LED_2 17 +#define ALFA_NX_GPIO_LED_3 16 +#define ALFA_NX_GPIO_LED_5 12 +#define ALFA_NX_GPIO_LED_6 8 +#define ALFA_NX_GPIO_LED_7 6 +#define ALFA_NX_GPIO_LED_8 7 + +#define ALFA_NX_GPIO_BTN_RESET 11 + +#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL) + +#define ALFA_NX_MAC0_OFFSET 0 +#define ALFA_NX_MAC1_OFFSET 6 +#define ALFA_NX_CALDATA_OFFSET 0x1000 + +static struct mtd_partition alfa_nx_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x600000, + }, { + .name = "kernel", + .offset = 0x650000, + .size = 0x190000, + }, { + .name = "nvram", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x780000, + } +}; + +static struct flash_platform_data alfa_nx_flash_data = { + .parts = alfa_nx_partitions, + .nr_parts = ARRAY_SIZE(alfa_nx_partitions), +}; + +static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALFA_NX_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct gpio_led alfa_nx_leds_gpio[] __initdata = { + { + .name = "alfa:green:led_2", + .gpio = ALFA_NX_GPIO_LED_2, + .active_low = 1, + }, { + .name = "alfa:green:led_3", + .gpio = ALFA_NX_GPIO_LED_3, + .active_low = 1, + }, { + .name = "alfa:red:led_5", + .gpio = ALFA_NX_GPIO_LED_5, + .active_low = 1, + }, { + .name = "alfa:amber:led_6", + .gpio = ALFA_NX_GPIO_LED_6, + .active_low = 1, + }, { + .name = "alfa:green:led_7", + .gpio = ALFA_NX_GPIO_LED_7, + .active_low = 1, + }, { + .name = "alfa:green:led_8", + .gpio = ALFA_NX_GPIO_LED_8, + .active_low = 1, + } +}; + +static void __init alfa_nx_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, + AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_register_m25p80(&alfa_nx_flash_data); + + ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio), + alfa_nx_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(alfa_nx_gpio_keys), + alfa_nx_gpio_keys); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, + art + ALFA_NX_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, + art + ALFA_NX_MAC1_OFFSET, 0); + + /* WAN port */ + ath79_register_eth(0); + /* LAN port */ + ath79_register_eth(1); + + ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5", + alfa_nx_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c new file mode 100644 index 0000000000..fa3cefb64c --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c @@ -0,0 +1,136 @@ +/* + * Allnet ALL0258N support + * + * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +/* found via /sys/gpio/... try and error */ +#define ALL0258N_GPIO_BTN_RESET 1 +#define ALL0258N_GPIO_LED_RSSIHIGH 13 +#define ALL0258N_GPIO_LED_RSSIMEDIUM 15 +#define ALL0258N_GPIO_LED_RSSILOW 14 + +/* defaults taken from others machs */ +#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL) + +/* showed up in the original firmware's bootlog */ +#define ALL0258N_SEC_PHYMASK BIT(3) + +/* + * from U-Boot bootargs of original firmware: + * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART) + * we use a more OpenWrt-friendly layout now: + * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART) + */ +static struct mtd_partition all0258n_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0E0000, + }, { + .name = "rootfs", + .offset = 0x130000, + .size = 0x540000, + }, { + .name = "failsafe", + .offset = 0x670000, + .size = 0x180000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x620000, + }, { + .name = "art", + .offset = 0x7F0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data all0258n_flash_data = { + .parts = all0258n_partitions, + .nr_parts = ARRAY_SIZE(all0258n_partitions), +}; + +static struct gpio_led all0258n_leds_gpio[] __initdata = { + { + .name = "all0258n:green:rssihigh", + .gpio = ALL0258N_GPIO_LED_RSSIHIGH, + .active_low = 1, + }, { + .name = "all0258n:yellow:rssimedium", + .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM, + .active_low = 1, + }, { + .name = "all0258n:red:rssilow", + .gpio = ALL0258N_GPIO_LED_RSSILOW, + .active_low = 1, + } +}; + +static struct gpio_keys_button all0258n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALL0258N_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init all0258n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000); + + ath79_register_m25p80(&all0258n_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio), + all0258n_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(all0258n_gpio_keys), + all0258n_gpio_keys); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + + ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK; + + ath79_register_mdio(0, 0x0); + + ath79_register_eth(0); + ath79_register_eth(1); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N", + all0258n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c new file mode 100644 index 0000000000..8519a9d9a6 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c @@ -0,0 +1,275 @@ +/* + * Atheros AP83 board support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/vsc7385.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define AP83_GPIO_LED_WLAN 6 +#define AP83_GPIO_LED_POWER 14 +#define AP83_GPIO_LED_JUMPSTART 15 +#define AP83_GPIO_BTN_JUMPSTART 12 +#define AP83_GPIO_BTN_RESET 21 + +#define AP83_050_GPIO_VSC7385_CS 1 +#define AP83_050_GPIO_VSC7385_MISO 3 +#define AP83_050_GPIO_VSC7385_MOSI 16 +#define AP83_050_GPIO_VSC7385_SCK 17 + +#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) + +static struct mtd_partition ap83_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x060000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x1a0000, + .size = 0x650000, + }, { + .name = "art", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x060000, + .size = 0x790000, + } +}; + +static struct physmap_flash_data ap83_flash_data = { + .width = 2, + .parts = ap83_flash_partitions, + .nr_parts = ARRAY_SIZE(ap83_flash_partitions), +}; + +static struct resource ap83_flash_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ap83_flash_device = { + .name = "ar91xx-flash", + .id = -1, + .resource = ap83_flash_resources, + .num_resources = ARRAY_SIZE(ap83_flash_resources), + .dev = { + .platform_data = &ap83_flash_data, + } +}; + +static struct gpio_led ap83_leds_gpio[] __initdata = { + { + .name = "ap83:green:jumpstart", + .gpio = AP83_GPIO_LED_JUMPSTART, + .active_low = 0, + }, { + .name = "ap83:green:power", + .gpio = AP83_GPIO_LED_POWER, + .active_low = 0, + }, { + .name = "ap83:green:wlan", + .gpio = AP83_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ap83_gpio_keys[] __initdata = { + { + .desc = "soft_reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP83_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "jumpstart", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP83_GPIO_BTN_JUMPSTART, + .active_low = 1, + } +}; + +static struct resource ap83_040_spi_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ap83_040_spi_device = { + .name = "ap83-spi", + .id = 0, + .resource = ap83_040_spi_resources, + .num_resources = ARRAY_SIZE(ap83_040_spi_resources), +}; + +static struct spi_gpio_platform_data ap83_050_spi_data = { + .miso = AP83_050_GPIO_VSC7385_MISO, + .mosi = AP83_050_GPIO_VSC7385_MOSI, + .sck = AP83_050_GPIO_VSC7385_SCK, + .num_chipselect = 1, +}; + +static struct platform_device ap83_050_spi_device = { + .name = "spi_gpio", + .id = 0, + .dev = { + .platform_data = &ap83_050_spi_data, + } +}; + +static void ap83_vsc7385_reset(void) +{ + ath79_device_reset_set(AR71XX_RESET_GE1_PHY); + udelay(10); + ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); + mdelay(50); +} + +static struct vsc7385_platform_data ap83_vsc7385_data = { + .reset = ap83_vsc7385_reset, + .ucode_name = "vsc7385_ucode_ap83.bin", + .mac_cfg = { + .tx_ipg = 6, + .bit2 = 0, + .clk_sel = 3, + }, +}; + +static struct spi_board_info ap83_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "spi-vsc7385", + .platform_data = &ap83_vsc7385_data, + .controller_data = (void *) AP83_050_GPIO_VSC7385_CS, + } +}; + +static void __init ap83_generic_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_mdio(0, 0xfffffffe); + + ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = 0x1; + + ath79_register_eth(0); + + ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_eth1_pll_data.pll_1000 = 0x1f000000; + + ath79_register_eth(1); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio), + ap83_leds_gpio); + + ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap83_gpio_keys), + ap83_gpio_keys); + + ath79_register_usb(); + + ath79_register_wmac(eeprom, NULL); + + platform_device_register(&ap83_flash_device); + + spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info)); +} + +static void ap83_040_flash_lock(struct platform_device *pdev) +{ + ath79_flash_acquire(); +} + +static void ap83_040_flash_unlock(struct platform_device *pdev) +{ + ath79_flash_release(); +} + +static void __init ap83_040_setup(void) +{ + ap83_flash_data.lock = ap83_040_flash_lock; + ap83_flash_data.unlock = ap83_040_flash_unlock; + ap83_generic_setup(); + platform_device_register(&ap83_040_spi_device); +} + +static void __init ap83_050_setup(void) +{ + ap83_generic_setup(); + platform_device_register(&ap83_050_spi_device); +} + +static void __init ap83_setup(void) +{ + u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244); + unsigned int board_version; + + board_version = (unsigned int)(board_id[0] - '0'); + board_version += ((unsigned int)(board_id[1] - '0')) * 10; + + switch (board_version) { + case 40: + ap83_040_setup(); + break; + case 50: + ap83_050_setup(); + break; + default: + printk(KERN_WARNING "AP83-%03u board is not yet supported\n", + board_version); + } +} + +MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c new file mode 100644 index 0000000000..9ab36cc1cb --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c @@ -0,0 +1,176 @@ +/* + * Atheros AP96 board support + * + * Copyright (C) 2009 Marco Porsch + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Atheros Communications + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define AP96_GPIO_LED_12_GREEN 0 +#define AP96_GPIO_LED_3_GREEN 1 +#define AP96_GPIO_LED_2_GREEN 2 +#define AP96_GPIO_LED_WPS_GREEN 4 +#define AP96_GPIO_LED_5_GREEN 5 +#define AP96_GPIO_LED_4_ORANGE 6 + +/* Reset button - next to the power connector */ +#define AP96_GPIO_BTN_RESET 3 +/* WPS button - next to a led on right */ +#define AP96_GPIO_BTN_WPS 8 + +#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL) + +#define AP96_WMAC0_MAC_OFFSET 0x120c +#define AP96_WMAC1_MAC_OFFSET 0x520c +#define AP96_CALDATA0_OFFSET 0x1000 +#define AP96_CALDATA1_OFFSET 0x5000 + +static struct mtd_partition ap96_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "rootfs", + .offset = 0x040000, + .size = 0x600000, + }, { + .name = "uImage", + .offset = 0x640000, + .size = 0x1b0000, + }, { + .name = "caldata", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data ap96_flash_data = { + .parts = ap96_partitions, + .nr_parts = ARRAY_SIZE(ap96_partitions), +}; + +/* + * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12 + * below (from left to right on the board). Led 1 seems to be on whenever the + * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange; + * others are green. + * + * In addition, there is one led next to a button on the right side for WPS. + */ +static struct gpio_led ap96_leds_gpio[] __initdata = { + { + .name = "ap96:green:led2", + .gpio = AP96_GPIO_LED_2_GREEN, + .active_low = 1, + }, { + .name = "ap96:green:led3", + .gpio = AP96_GPIO_LED_3_GREEN, + .active_low = 1, + }, { + .name = "ap96:orange:led4", + .gpio = AP96_GPIO_LED_4_ORANGE, + .active_low = 1, + }, { + .name = "ap96:green:led5", + .gpio = AP96_GPIO_LED_5_GREEN, + .active_low = 1, + }, { + .name = "ap96:green:led12", + .gpio = AP96_GPIO_LED_12_GREEN, + .active_low = 1, + }, { /* next to a button on right */ + .name = "ap96:green:wps", + .gpio = AP96_GPIO_LED_WPS_GREEN, + .active_low = 1, + } +}; + +static struct gpio_keys_button ap96_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP96_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP96_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +#define AP96_WAN_PHYMASK 0x10 +#define AP96_LAN_PHYMASK 0x0f + +static void __init ap96_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK)); + + ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + + ath79_init_mac(ath79_eth1_data.mac_addr, art, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK; + + ath79_eth1_pll_data.pll_1000 = 0x1f000000; + + ath79_register_eth(1); + + ath79_register_usb(); + + ath79_register_m25p80(&ap96_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio), + ap96_leds_gpio); + + ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap96_gpio_keys), + ap96_gpio_keys); + + ap94_pci_init(art + AP96_CALDATA0_OFFSET, + art + AP96_WMAC0_MAC_OFFSET, + art + AP96_CALDATA1_OFFSET, + art + AP96_WMAC1_MAC_OFFSET); +} + +MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c new file mode 100644 index 0000000000..281129b787 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c @@ -0,0 +1,107 @@ +/* + * AzureWave AW-NR580 board support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "machtypes.h" +#include "pci.h" + +#define AW_NR580_GPIO_LED_READY_RED 0 +#define AW_NR580_GPIO_LED_WLAN 1 +#define AW_NR580_GPIO_LED_READY_GREEN 2 +#define AW_NR580_GPIO_LED_WPS_GREEN 4 +#define AW_NR580_GPIO_LED_WPS_AMBER 5 + +#define AW_NR580_GPIO_BTN_WPS 3 +#define AW_NR580_GPIO_BTN_RESET 11 + +#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL) + +static struct gpio_led aw_nr580_leds_gpio[] __initdata = { + { + .name = "aw-nr580:red:ready", + .gpio = AW_NR580_GPIO_LED_READY_RED, + .active_low = 0, + }, { + .name = "aw-nr580:green:ready", + .gpio = AW_NR580_GPIO_LED_READY_GREEN, + .active_low = 0, + }, { + .name = "aw-nr580:green:wps", + .gpio = AW_NR580_GPIO_LED_WPS_GREEN, + .active_low = 0, + }, { + .name = "aw-nr580:amber:wps", + .gpio = AW_NR580_GPIO_LED_WPS_AMBER, + .active_low = 0, + }, { + .name = "aw-nr580:green:wlan", + .gpio = AW_NR580_GPIO_LED_WLAN, + .active_low = 0, + } +}; + +static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, + .gpio = AW_NR580_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, + .gpio = AW_NR580_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static const char *aw_nr580_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data aw_nr580_flash_data = { + .part_probes = aw_nr580_part_probes, +}; + +static void __init aw_nr580_setup(void) +{ + ath79_register_mdio(0, 0x0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + + ath79_register_pci(); + + ath79_register_m25p80(&aw_nr580_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), + aw_nr580_leds_gpio); + + ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL, + ARRAY_SIZE(aw_nr580_gpio_keys), + aw_nr580_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580", + aw_nr580_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c new file mode 100644 index 0000000000..8b280caca1 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c @@ -0,0 +1,147 @@ +/* + * D-Link DIR-600 rev. A1 board support + * + * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "nvram.h" + +#define DIR_600_A1_GPIO_LED_WPS 0 +#define DIR_600_A1_GPIO_LED_POWER_AMBER 1 +#define DIR_600_A1_GPIO_LED_POWER_GREEN 6 + +#define DIR_600_A1_GPIO_BTN_RESET 8 +#define DIR_600_A1_GPIO_BTN_WPS 12 + +#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL) + +#define DIR_600_A1_NVRAM_ADDR 0x1f030000 +#define DIR_600_A1_NVRAM_SIZE 0x10000 + +static struct mtd_partition dir_600_a1_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "nvram", + .offset = 0x030000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "mac", + .offset = 0x3e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; + +static struct flash_platform_data dir_600_a1_flash_data = { + .parts = dir_600_a1_partitions, + .nr_parts = ARRAY_SIZE(dir_600_a1_partitions), +}; + +static struct gpio_led dir_600_a1_leds_gpio[] __initdata = { + { + .name = "dir-600-a1:green:power", + .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN, + }, { + .name = "dir-600-a1:amber:power", + .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER, + }, { + .name = "dir-600-a1:blue:wps", + .gpio = DIR_600_A1_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_600_A1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_600_A1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init dir_600_a1_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac_buff[6]; + u8 *mac = NULL; + + if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE, + "lan_mac=", mac_buff) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); + mac = mac_buff; + } + + ath79_register_m25p80(&dir_600_a1_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), + dir_600_a1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_600_a1_gpio_keys), + dir_600_a1_gpio_keys); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + + /* WAN port */ + ath79_register_eth(0); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1", + dir_600_a1_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c new file mode 100644 index 0000000000..5e9550476c --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c @@ -0,0 +1,171 @@ +/* + * D-Link DIR-615 rev C1 board support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "nvram.h" + +#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */ +#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */ +#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */ +#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */ +#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */ +#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */ +#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */ + +/* buttons may need refinement */ + +#define DIR_615C1_GPIO_BTN_WPS 12 +#define DIR_615C1_GPIO_BTN_RESET 21 + +#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL) + +#define DIR_615C1_CONFIG_ADDR 0x1f020000 +#define DIR_615C1_CONFIG_SIZE 0x10000 + +static struct mtd_partition dir_615c1_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x020000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x030000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x110000, + .size = 0x2e0000, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x030000, + .size = 0x3c0000, + } +}; + +static struct flash_platform_data dir_615c1_flash_data = { + .parts = dir_615c1_partitions, + .nr_parts = ARRAY_SIZE(dir_615c1_partitions), +}; + +static struct gpio_led dir_615c1_leds_gpio[] __initdata = { + { + .name = "dir-615c1:orange:status", + .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS, + .active_low = 1, + }, { + .name = "dir-615c1:blue:wps", + .gpio = DIR_615C1_GPIO_LED_BLUE_WPS, + .active_low = 1, + }, { + .name = "dir-615c1:green:wan", + .gpio = DIR_615C1_GPIO_LED_GREEN_WAN, + .active_low = 1, + }, { + .name = "dir-615c1:green:wancpu", + .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU, + .active_low = 1, + }, { + .name = "dir-615c1:green:wlan", + .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN, + .active_low = 1, + }, { + .name = "dir-615c1:green:status", + .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS, + .active_low = 1, + }, { + .name = "dir-615c1:orange:wan", + .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN, + .active_low = 1, + } + +}; + +static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615C1_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615C1_GPIO_BTN_WPS, + } +}; + +#define DIR_615C1_LAN_PHYMASK BIT(0) +#define DIR_615C1_WAN_PHYMASK BIT(4) +#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \ + DIR_615C1_WAN_PHYMASK)) + +static void __init dir_615c1_setup(void) +{ + const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac[6]; + u8 *wlan_mac = NULL; + + if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, + "lan_mac=", mac) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + wlan_mac = mac; + } + + ath79_register_mdio(0, DIR_615C1_MDIO_MASK); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK; + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&dir_615c1_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio), + dir_615c1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615c1_gpio_keys), + dir_615c1_gpio_keys); + + ath79_register_wmac(eeprom, wlan_mac); +} + +MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1", + dir_615c1_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c new file mode 100644 index 0000000000..63cb8f48b9 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c @@ -0,0 +1,208 @@ +/* + * D-Link DIR-825 rev. B1 board support + * + * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o. + * + * based on mach-wndr3700.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> +#include <linux/rtl8366.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define DIR825B1_GPIO_LED_BLUE_USB 0 +#define DIR825B1_GPIO_LED_ORANGE_POWER 1 +#define DIR825B1_GPIO_LED_BLUE_POWER 2 +#define DIR825B1_GPIO_LED_BLUE_WPS 4 +#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 +#define DIR825B1_GPIO_LED_BLUE_PLANET 11 + +#define DIR825B1_GPIO_BTN_RESET 3 +#define DIR825B1_GPIO_BTN_WPS 8 + +#define DIR825B1_GPIO_RTL8366_SDA 5 +#define DIR825B1_GPIO_RTL8366_SCK 7 + +#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) + +#define DIR825B1_CAL_LOCATION_0 0x1f661000 +#define DIR825B1_CAL_LOCATION_1 0x1f665000 + +#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0 +#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4 + +static struct mtd_partition dir825b1_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x610000, + }, { + .name = "caldata", + .offset = 0x660000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "unknown", + .offset = 0x670000, + .size = 0x190000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data dir825b1_flash_data = { + .parts = dir825b1_partitions, + .nr_parts = ARRAY_SIZE(dir825b1_partitions), +}; + +static struct gpio_led dir825b1_leds_gpio[] __initdata = { + { + .name = "dir825b1:blue:usb", + .gpio = DIR825B1_GPIO_LED_BLUE_USB, + .active_low = 1, + }, { + .name = "dir825b1:orange:power", + .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:power", + .gpio = DIR825B1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:wps", + .gpio = DIR825B1_GPIO_LED_BLUE_WPS, + .active_low = 1, + }, { + .name = "dir825b1:orange:planet", + .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, + .active_low = 1, + }, { + .name = "dir825b1:blue:planet", + .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825B1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825B1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { + { .reg = 0x06, .val = 0x0108 }, +}; + +static struct rtl8366_platform_data dir825b1_rtl8366s_data = { + .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, + .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, + .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), + .initvals = dir825b1_rtl8366s_initvals, +}; + +static struct platform_device dir825b1_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &dir825b1_rtl8366s_data, + } +}; + +static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr) +{ + int ret; + u8 *src = (u8 *)KSEG1ADDR(src_addr); + + ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &dest[0], &dest[1], &dest[2], + &dest[3], &dest[4], &dest[5]); + + if (ret != ETH_ALEN) + memset(dest, 0, ETH_ALEN); +} + +static void __init dir825b1_setup(void) +{ + u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; + + dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0); + dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2); + ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_pll_data.pll_1000 = 0x11110000; + + ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3); + ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = 0x10; + ath79_eth1_pll_data.pll_1000 = 0x11110000; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&dir825b1_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), + dir825b1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir825b1_gpio_keys), + dir825b1_gpio_keys); + + ath79_register_usb(); + + platform_device_register(&dir825b1_rtl8366s_device); + + ap9x_pci_setup_wmac_led_pin(0, 5); + ap9x_pci_setup_wmac_led_pin(1, 5); + + ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1, + (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2); +} + +MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", + dir825b1_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c new file mode 100644 index 0000000000..c2c85f2e34 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c @@ -0,0 +1,179 @@ +/* + * Senao EAP7660D board support + * + * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com> + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/ath5k_platform.h> +#include <linux/delay.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/pci.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" + +#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */ +#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL) + +#define EAP7660D_GPIO_DS4 7 +#define EAP7660D_GPIO_DS5 2 +#define EAP7660D_GPIO_DS7 0 +#define EAP7660D_GPIO_DS8 4 +#define EAP7660D_GPIO_SW1 3 +#define EAP7660D_GPIO_SW3 8 +#define EAP7660D_PHYMASK BIT(20) +#define EAP7660D_BOARDCONFIG 0x1F7F0000 +#define EAP7660D_GBIC_MAC_OFFSET 0x1000 +#define EAP7660D_WMAC0_MAC_OFFSET 0x1010 +#define EAP7660D_WMAC1_MAC_OFFSET 0x1016 +#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000 +#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000 + +static struct ath5k_platform_data eap7660d_wmac0_data; +static struct ath5k_platform_data eap7660d_wmac1_data; +static char eap7660d_wmac0_mac[6]; +static char eap7660d_wmac1_mac[6]; +static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; +static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; + +#ifdef CONFIG_PCI +static int eap7660d_pci_plat_dev_init(struct pci_dev *dev) +{ + switch (PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &eap7660d_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &eap7660d_wmac1_data; + break; + } + + return 0; +} + +void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) +{ + if (cal_data0 && *cal_data0 == 0xa55a) { + memcpy(eap7660d_wmac0_eeprom, cal_data0, + ATH5K_PLAT_EEP_MAX_WORDS); + eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom; + } + + if (cal_data1 && *cal_data1 == 0xa55a) { + memcpy(eap7660d_wmac1_eeprom, cal_data1, + ATH5K_PLAT_EEP_MAX_WORDS); + eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom; + } + + if (mac_addr0) { + memcpy(eap7660d_wmac0_mac, mac_addr0, + sizeof(eap7660d_wmac0_mac)); + eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac; + } + + if (mac_addr1) { + memcpy(eap7660d_wmac1_mac, mac_addr1, + sizeof(eap7660d_wmac1_mac)); + eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac; + } + + ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init); + ath79_register_pci(); +} +#else +static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) +{ +} +#endif /* CONFIG_PCI */ + +static struct gpio_led eap7660d_leds_gpio[] __initdata = { + { + .name = "eap7660d:green:ds8", + .gpio = EAP7660D_GPIO_DS8, + .active_low = 0, + }, + { + .name = "eap7660d:green:ds5", + .gpio = EAP7660D_GPIO_DS5, + .active_low = 0, + }, + { + .name = "eap7660d:green:ds7", + .gpio = EAP7660D_GPIO_DS7, + .active_low = 0, + }, + { + .name = "eap7660d:green:ds4", + .gpio = EAP7660D_GPIO_DS4, + .active_low = 0, + } +}; + +static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, + .gpio = EAP7660D_GPIO_SW1, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, + .gpio = EAP7660D_GPIO_SW3, + .active_low = 1, + } +}; + +static const char *eap7660d_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data eap7660d_flash_data = { + .part_probes = eap7660d_part_probes, +}; + +static void __init eap7660d_setup(void) +{ + u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG); + + ath79_register_mdio(0, ~EAP7660D_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, + boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = EAP7660D_PHYMASK; + ath79_register_eth(0); + ath79_register_m25p80(&eap7660d_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio), + eap7660d_leds_gpio); + ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL, + ARRAY_SIZE(eap7660d_gpio_keys), + eap7660d_gpio_keys); + eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET, + boardconfig + EAP7660D_WMAC0_MAC_OFFSET, + boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET, + boardconfig + EAP7660D_WMAC1_MAC_OFFSET); +}; + +MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D", + eap7660d_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c new file mode 100644 index 0000000000..45dc0f618c --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c @@ -0,0 +1,136 @@ +/* + * ALFA NETWORKS Hornet-UB board support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define HORNET_UB_GPIO_LED_WLAN 0 +#define HORNET_UB_GPIO_LED_USB 1 +#define HORNET_UB_GPIO_LED_LAN 13 +#define HORNET_UB_GPIO_LED_WAN 17 +#define HORNET_UB_GPIO_LED_WPS 27 + +#define HORNET_UB_GPIO_BTN_RESET 11 +#define HORNET_UB_GPIO_BTN_WPS 12 + +#define HORNET_UB_GPIO_USB_POWER 26 + +#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */ +#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL) + +#define HORNET_UB_MAC0_OFFSET 0x0000 +#define HORNET_UB_MAC1_OFFSET 0x0006 +#define HORNET_UB_CALDATA_OFFSET 0x1000 + +static struct gpio_led hornet_ub_leds_gpio[] __initdata = { + { + .name = "alfa:blue:lan", + .gpio = HORNET_UB_GPIO_LED_LAN, + .active_low = 0, + }, + { + .name = "alfa:blue:usb", + .gpio = HORNET_UB_GPIO_LED_USB, + .active_low = 0, + }, + { + .name = "alfa:blue:wan", + .gpio = HORNET_UB_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "alfa:blue:wlan", + .gpio = HORNET_UB_GPIO_LED_WLAN, + .active_low = 0, + }, + { + .name = "alfa:blue:wps", + .gpio = HORNET_UB_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, + .gpio = HORNET_UB_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, + .gpio = HORNET_UB_GPIO_BTN_RESET, + .active_low = 0, + } +}; + +static void __init hornet_ub_gpio_setup(void) +{ + u32 t; + + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; + ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); + + gpio_request(HORNET_UB_GPIO_USB_POWER, "USB power"); + gpio_direction_output(HORNET_UB_GPIO_USB_POWER, 1); +} + +static void __init hornet_ub_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + hornet_ub_gpio_setup(); + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio), + hornet_ub_leds_gpio); + ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL, + ARRAY_SIZE(hornet_ub_gpio_keys), + hornet_ub_gpio_keys); + + ath79_init_mac(ath79_eth1_data.mac_addr, + art + HORNET_UB_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth0_data.mac_addr, + art + HORNET_UB_MAC1_OFFSET, 0); + + ath79_register_mdio(0, 0x0); + + ath79_register_eth(1); + ath79_register_eth(0); + + ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB", + hornet_ub_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c new file mode 100644 index 0000000000..46c12c1be3 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c @@ -0,0 +1,114 @@ +/* + * jjPlus JA76PF board support + */ + +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */ +#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL) + +#define JA76PF_GPIO_I2C_SCL 0 +#define JA76PF_GPIO_I2C_SDA 1 +#define JA76PF_GPIO_LED_1 5 +#define JA76PF_GPIO_LED_2 4 +#define JA76PF_GPIO_LED_3 3 +#define JA76PF_GPIO_BTN_RESET 11 + +static struct gpio_led ja76pf_leds_gpio[] __initdata = { + { + .name = "ja76pf:green:led1", + .gpio = JA76PF_GPIO_LED_1, + .active_low = 1, + }, { + .name = "ja76pf:green:led2", + .gpio = JA76PF_GPIO_LED_2, + .active_low = 1, + }, { + .name = "ja76pf:green:led3", + .gpio = JA76PF_GPIO_LED_3, + .active_low = 1, + } +}; + +static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, + .gpio = JA76PF_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = { + .sda_pin = JA76PF_GPIO_I2C_SDA, + .scl_pin = JA76PF_GPIO_I2C_SCL, +}; + +static struct platform_device ja76pf_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ja76pf_i2c_gpio_data, + } +}; + +static const char *ja76pf_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data ja76pf_flash_data = { + .part_probes = ja76pf_part_probes, +}; + +#define JA76PF_WAN_PHYMASK (1 << 4) +#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3)) +#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK) + +static void __init ja76pf_init(void) +{ + ath79_register_m25p80(&ja76pf_flash_data); + + ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK; + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_eth(1); + + platform_device_register(&ja76pf_i2c_gpio_device); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio), + ja76pf_leds_gpio); + + ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ja76pf_gpio_keys), + ja76pf_gpio_keys); + + ath79_register_usb(); + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c new file mode 100644 index 0000000000..a3c93ccd90 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c @@ -0,0 +1,95 @@ +/* + * jjPlus JWAP003 board support + * + */ + +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */ +#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL) + +#define JWAP003_GPIO_WPS 11 +#define JWAP003_GPIO_I2C_SCL 0 +#define JWAP003_GPIO_I2C_SDA 1 + +static struct gpio_keys_button jwap003_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL, + .gpio = JWAP003_GPIO_WPS, + .active_low = 1, + } +}; + +static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = { + .sda_pin = JWAP003_GPIO_I2C_SDA, + .scl_pin = JWAP003_GPIO_I2C_SCL, +}; + +static struct platform_device jwap003_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &jwap003_i2c_gpio_data, + } +}; + +static const char *jwap003_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data jwap003_flash_data = { + .part_probes = jwap003_part_probes, +}; + +#define JWAP003_WAN_PHYMASK BIT(0) +#define JWAP003_LAN_PHYMASK BIT(4) + +static void __init jwap003_init(void) +{ + ath79_register_m25p80(&jwap003_flash_data); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.has_ar8216 = 1; + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK; + ath79_eth1_data.speed = SPEED_100; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_eth(1); + + platform_device_register(&jwap003_i2c_gpio_device); + + ath79_register_usb(); + + ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL, + ARRAY_SIZE(jwap003_gpio_keys), + jwap003_gpio_keys); + + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c new file mode 100644 index 0000000000..a50436678f --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c @@ -0,0 +1,162 @@ +/* + * Planex MZK-W04NU board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define MZK_W04NU_GPIO_LED_USB 0 +#define MZK_W04NU_GPIO_LED_STATUS 1 +#define MZK_W04NU_GPIO_LED_WPS 3 +#define MZK_W04NU_GPIO_LED_WLAN 6 +#define MZK_W04NU_GPIO_LED_AP 15 +#define MZK_W04NU_GPIO_LED_ROUTER 16 + +#define MZK_W04NU_GPIO_BTN_APROUTER 5 +#define MZK_W04NU_GPIO_BTN_WPS 12 +#define MZK_W04NU_GPIO_BTN_RESET 21 + +#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */ +#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL) + +static struct mtd_partition mzk_w04nu_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x160000, + }, { + .name = "rootfs", + .offset = 0x1b0000, + .size = 0x630000, + }, { + .name = "art", + .offset = 0x7e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x790000, + } +}; + +static struct flash_platform_data mzk_w04nu_flash_data = { + .parts = mzk_w04nu_partitions, + .nr_parts = ARRAY_SIZE(mzk_w04nu_partitions), +}; + +static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = { + { + .name = "planex:green:status", + .gpio = MZK_W04NU_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "planex:blue:wps", + .gpio = MZK_W04NU_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "planex:green:wlan", + .gpio = MZK_W04NU_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "planex:green:usb", + .gpio = MZK_W04NU_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "planex:green:ap", + .gpio = MZK_W04NU_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "planex:green:router", + .gpio = MZK_W04NU_GPIO_LED_ROUTER, + .active_low = 1, + } +}; + +static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W04NU_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W04NU_GPIO_BTN_WPS, + .active_low = 1, + }, { + .desc = "aprouter", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W04NU_GPIO_BTN_APROUTER, + .active_low = 0, + } +}; + +#define MZK_W04NU_WAN_PHYMASK BIT(4) +#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) + +static void __init mzk_w04nu_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_mdio(0, MZK_W04NU_MDIO_MASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.has_ar8216 = 1; + + ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&mzk_w04nu_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio), + mzk_w04nu_leds_gpio); + + ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mzk_w04nu_gpio_keys), + mzk_w04nu_gpio_keys); + ath79_register_usb(); + + ath79_register_wmac(eeprom, NULL); +} + +MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU", + mzk_w04nu_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c new file mode 100644 index 0000000000..4a6d06b926 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c @@ -0,0 +1,155 @@ +/* + * Planex MZK-W300NH board support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define MZK_W300NH_GPIO_LED_STATUS 1 +#define MZK_W300NH_GPIO_LED_WPS 3 +#define MZK_W300NH_GPIO_LED_WLAN 6 +#define MZK_W300NH_GPIO_LED_AP 15 +#define MZK_W300NH_GPIO_LED_ROUTER 16 + +#define MZK_W300NH_GPIO_BTN_APROUTER 5 +#define MZK_W300NH_GPIO_BTN_WPS 12 +#define MZK_W300NH_GPIO_BTN_RESET 21 + +#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */ +#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL) + +static struct mtd_partition mzk_w300nh_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x160000, + }, { + .name = "rootfs", + .offset = 0x1b0000, + .size = 0x630000, + }, { + .name = "art", + .offset = 0x7e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x790000, + } +}; + +static struct flash_platform_data mzk_w300nh_flash_data = { + .parts = mzk_w300nh_partitions, + .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions), +}; + +static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = { + { + .name = "planex:green:status", + .gpio = MZK_W300NH_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "planex:blue:wps", + .gpio = MZK_W300NH_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "planex:green:wlan", + .gpio = MZK_W300NH_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "planex:green:ap", + .gpio = MZK_W300NH_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "planex:green:router", + .gpio = MZK_W300NH_GPIO_LED_ROUTER, + .active_low = 1, + } +}; + +static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W300NH_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W300NH_GPIO_BTN_WPS, + .active_low = 1, + }, { + .desc = "aprouter", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W300NH_GPIO_BTN_APROUTER, + .active_low = 0, + } +}; + +#define MZK_W300NH_WAN_PHYMASK BIT(4) +#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) + +static void __init mzk_w300nh_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_mdio(0, MZK_W300NH_MDIO_MASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.has_ar8216 = 1; + + ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&mzk_w300nh_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio), + mzk_w300nh_leds_gpio); + + ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mzk_w300nh_gpio_keys), + mzk_w300nh_gpio_keys); + ath79_register_wmac(eeprom, NULL); +} + +MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH", + mzk_w300nh_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c new file mode 100644 index 0000000000..8aa7331d43 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c @@ -0,0 +1,220 @@ +/* + * Zyxel NBG 460N/550N/550NH board support + * + * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com> + * + * based on mach-tl-wr1043nd.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c-gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/rtl8366.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +/* LEDs */ +#define NBG460N_GPIO_LED_WPS 3 +#define NBG460N_GPIO_LED_WAN 6 +#define NBG460N_GPIO_LED_POWER 14 +#define NBG460N_GPIO_LED_WLAN 15 + +/* Buttons */ +#define NBG460N_GPIO_BTN_WPS 12 +#define NBG460N_GPIO_BTN_RESET 21 + +#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL) + +/* RTC chip PCF8563 I2C interface */ +#define NBG460N_GPIO_PCF8563_SDA 8 +#define NBG460N_GPIO_PCF8563_SCK 7 + +/* Switch configuration I2C interface */ +#define NBG460N_GPIO_RTL8366_SDA 16 +#define NBG460N_GPIO_RTL8366_SCK 18 + +static struct mtd_partition nbg460n_partitions[] = { + { + .name = "Bootbase", + .offset = 0, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "U-Boot Config", + .offset = 0x010000, + .size = 0x030000, + }, { + .name = "U-Boot", + .offset = 0x040000, + .size = 0x030000, + }, { + .name = "linux", + .offset = 0x070000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x150000, + .size = 0x2a0000, + }, { + .name = "CalibData", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x070000, + .size = 0x380000, + } +}; + +static struct flash_platform_data nbg460n_flash_data = { + .parts = nbg460n_partitions, + .nr_parts = ARRAY_SIZE(nbg460n_partitions), +}; + +static struct gpio_led nbg460n_leds_gpio[] __initdata = { + { + .name = "nbg460n:green:power", + .gpio = NBG460N_GPIO_LED_POWER, + .active_low = 0, + .default_trigger = "default-on", + }, { + .name = "nbg460n:green:wps", + .gpio = NBG460N_GPIO_LED_WPS, + .active_low = 0, + }, { + .name = "nbg460n:green:wlan", + .gpio = NBG460N_GPIO_LED_WLAN, + .active_low = 0, + }, { + /* Not really for controlling the LED, + when set low the LED blinks uncontrollable */ + .name = "nbg460n:green:wan", + .gpio = NBG460N_GPIO_LED_WAN, + .active_low = 0, + } +}; + +static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG460N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG460N_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = { + .sda_pin = NBG460N_GPIO_PCF8563_SDA, + .scl_pin = NBG460N_GPIO_PCF8563_SCK, + .udelay = 10, +}; + +static struct platform_device nbg460n_i2c_device = { + .name = "i2c-gpio", + .id = -1, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = &nbg460n_i2c_device_platdata, + }, +}; + +static struct i2c_board_info nbg460n_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +static void __devinit nbg460n_i2c_init(void) +{ + /* The gpio interface */ + platform_device_register(&nbg460n_i2c_device); + /* I2C devices */ + i2c_register_board_info(0, nbg460n_i2c_devs, + ARRAY_SIZE(nbg460n_i2c_devs)); +} + + +static struct rtl8366_platform_data nbg460n_rtl8366s_data = { + .gpio_sda = NBG460N_GPIO_RTL8366_SDA, + .gpio_sck = NBG460N_GPIO_RTL8366_SCK, +}; + +static struct platform_device nbg460n_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &nbg460n_rtl8366s_data, + } +}; + +static void __init nbg460n_setup(void) +{ + /* end of bootloader sector contains mac address */ + u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8); + /* last sector contains wlan calib data */ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + /* LAN Port */ + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + + /* WAN Port */ + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + /* register the switch phy */ + platform_device_register(&nbg460n_rtl8366s_device); + + /* register flash */ + ath79_register_m25p80(&nbg460n_flash_data); + + ath79_register_wmac(eeprom, mac); + + /* register RTC chip */ + nbg460n_i2c_init(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio), + nbg460n_leds_gpio); + + ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(nbg460n_gpio_keys), + nbg460n_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", + nbg460n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c new file mode 100644 index 0000000000..519640ac9a --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c @@ -0,0 +1,116 @@ +/* + * OpenMesh OM2P support + * + * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define OM2P_GPIO_LED_POWER 0 +#define OM2P_GPIO_LED_GREEN 13 +#define OM2P_GPIO_LED_RED 14 +#define OM2P_GPIO_LED_YELLOW 15 +#define OM2P_GPIO_LED_LAN 16 +#define OM2P_GPIO_LED_WAN 17 +#define OM2P_GPIO_BTN_RESET 11 + +#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */ +#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL) + +#define OM2P_WAN_PHYMASK BIT(4) + +static struct flash_platform_data om2p_flash_data = { + .type = "s25sl12800", + .name = "ar7240-nor0", +}; + +static struct gpio_led om2p_leds_gpio[] __initdata = { + { + .name = "om2p:blue:power", + .gpio = OM2P_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "om2p:red:wifi", + .gpio = OM2P_GPIO_LED_RED, + .active_low = 1, + }, { + .name = "om2p:yellow:wifi", + .gpio = OM2P_GPIO_LED_YELLOW, + .active_low = 1, + }, { + .name = "om2p:green:wifi", + .gpio = OM2P_GPIO_LED_GREEN, + .active_low = 1, + }, { + .name = "om2p:blue:lan", + .gpio = OM2P_GPIO_LED_LAN, + .active_low = 1, + }, { + .name = "om2p:blue:wan", + .gpio = OM2P_GPIO_LED_WAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button om2p_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL, + .gpio = OM2P_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init om2p_setup(void) +{ + u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); + u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); + u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000); + + ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_register_m25p80(&om2p_flash_data); + + ath79_register_mdio(0, ~OM2P_WAN_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + + ath79_register_eth(0); + ath79_register_eth(1); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), + om2p_leds_gpio); + + ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, + ARRAY_SIZE(om2p_gpio_keys), + om2p_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c new file mode 100644 index 0000000000..3a350e90a1 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c @@ -0,0 +1,83 @@ +/* + * Atheros PB42 board support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */ +#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL) + +#define PB42_GPIO_BTN_SW4 8 +#define PB42_GPIO_BTN_SW5 3 + +static struct gpio_keys_button pb42_gpio_keys[] __initdata = { + { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB42_GPIO_BTN_SW4, + .active_low = 1, + }, { + .desc = "sw5", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB42_GPIO_BTN_SW5, + .active_low = 1, + } +}; + +static const char *pb42_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data pb42_flash_data = { + .part_probes = pb42_part_probes, +}; + +#define PB42_WAN_PHYMASK BIT(20) +#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) +#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK) + +static void __init pb42_init(void) +{ + ath79_register_m25p80(&pb42_flash_data); + + ath79_register_mdio(0, ~PB42_MDIO_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK; + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.speed = SPEED_100; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL, + ARRAY_SIZE(pb42_gpio_keys), + pb42_gpio_keys); + + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c new file mode 100644 index 0000000000..96b404c792 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c @@ -0,0 +1,102 @@ +/* + * Atheros PB92 board support + * + * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +static struct mtd_partition pb92_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x2b0000, + }, { + .name = "uImage", + .offset = 0x300000, + .size = 0x0e0000, + }, { + .name = "ART", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data pb92_flash_data = { + .parts = pb92_partitions, + .nr_parts = ARRAY_SIZE(pb92_partitions), +}; + +#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */ +#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL) + +#define PB92_GPIO_BTN_SW4 8 +#define PB92_GPIO_BTN_SW5 3 + +static struct gpio_keys_button pb92_gpio_keys[] __initdata = { + { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB92_GPIO_BTN_SW4, + .active_low = 1, + }, { + .desc = "sw5", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB92_GPIO_BTN_SW5, + .active_low = 1, + } +}; + +static void __init pb92_init(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(&pb92_flash_data); + + ath79_register_mdio(0, ~BIT(0)); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + + ath79_register_eth(0); + + ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, + ARRAY_SIZE(pb92_gpio_keys), + pb92_gpio_keys); + + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c new file mode 100644 index 0000000000..24a4e7c3ca --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c @@ -0,0 +1,406 @@ +/* + * MikroTik RouterBOARD 4xx series support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/mdio-gpio.h> +#include <linux/mmc/host.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/pci.h> +#include <asm/mach-ath79/rb4xx_cpld.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +#define RB4XX_GPIO_USER_LED 4 +#define RB4XX_GPIO_RESET_SWITCH 7 + +#define RB4XX_GPIO_CPLD_BASE 32 +#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1) +#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2) +#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3) +#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4) +#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5) + +#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */ +#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL) + +static struct gpio_led rb4xx_leds_gpio[] __initdata = { + { + .name = "rb4xx:yellow:user", + .gpio = RB4XX_GPIO_USER_LED, + .active_low = 0, + }, { + .name = "rb4xx:green:led1", + .gpio = RB4XX_GPIO_CPLD_LED1, + .active_low = 1, + }, { + .name = "rb4xx:green:led2", + .gpio = RB4XX_GPIO_CPLD_LED2, + .active_low = 1, + }, { + .name = "rb4xx:green:led3", + .gpio = RB4XX_GPIO_CPLD_LED3, + .active_low = 1, + }, { + .name = "rb4xx:green:led4", + .gpio = RB4XX_GPIO_CPLD_LED4, + .active_low = 1, + }, { + .name = "rb4xx:green:led5", + .gpio = RB4XX_GPIO_CPLD_LED5, + .active_low = 0, + }, +}; + +static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = { + { + .desc = "reset_switch", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL, + .gpio = RB4XX_GPIO_RESET_SWITCH, + .active_low = 1, + } +}; + +static struct platform_device rb4xx_nand_device = { + .name = "rb4xx-nand", + .id = -1, +}; + +static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = { + { + .slot = 17, + .pin = 1, + .irq = ATH79_PCI_IRQ(2), + }, { + .slot = 18, + .pin = 1, + .irq = ATH79_PCI_IRQ(0), + }, { + .slot = 18, + .pin = 2, + .irq = ATH79_PCI_IRQ(1), + }, { + .slot = 19, + .pin = 1, + .irq = ATH79_PCI_IRQ(1), + }, { + .slot = 19, + .pin = 1, + .irq = ATH79_PCI_IRQ(2), + } +}; + +static struct mtd_partition rb4xx_partitions[] = { + { + .name = "routerboot", + .offset = 0, + .size = 0x0b000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "hard_config", + .offset = 0x0b000, + .size = 0x01000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "bios", + .offset = 0x0d000, + .size = 0x02000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "soft_config", + .offset = 0x0f000, + .size = 0x01000, + } +}; + +static struct flash_platform_data rb4xx_flash_data = { + .type = "pm25lv512", + .parts = rb4xx_partitions, + .nr_parts = ARRAY_SIZE(rb4xx_partitions), +}; + +static struct rb4xx_cpld_platform_data rb4xx_cpld_data = { + .gpio_base = RB4XX_GPIO_CPLD_BASE, +}; + +static struct mmc_spi_platform_data rb4xx_mmc_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct spi_board_info rb4xx_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &rb4xx_flash_data, + }, { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "spi-rb4xx-cpld", + .platform_data = &rb4xx_cpld_data, + } +}; + +static struct spi_board_info rb4xx_microsd_info[] = { + { + .bus_num = 0, + .chip_select = 2, + .max_speed_hz = 25000000, + .modalias = "mmc_spi", + .platform_data = &rb4xx_mmc_data, + } +}; + + +static struct resource rb4xx_spi_resources[] = { + { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rb4xx_spi_device = { + .name = "rb4xx-spi", + .id = -1, + .resource = rb4xx_spi_resources, + .num_resources = ARRAY_SIZE(rb4xx_spi_resources), +}; + +static void __init rb4xx_generic_setup(void) +{ + ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | + AR71XX_GPIO_FUNC_SPI_CS2_EN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), + rb4xx_leds_gpio); + + ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rb4xx_gpio_keys), + rb4xx_gpio_keys); + + spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); + platform_device_register(&rb4xx_spi_device); + platform_device_register(&rb4xx_nand_device); +} + +static void __init rb411_setup(void) +{ + rb4xx_generic_setup(); + spi_register_board_info(rb4xx_microsd_info, + ARRAY_SIZE(rb4xx_microsd_info)); + + ath79_register_mdio(0, 0xfffffffc); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = 0x00000003; + + ath79_register_eth(0); + + ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", + rb411_setup); + +static void __init rb411u_setup(void) +{ + rb411_setup(); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", + rb411u_setup); + +#define RB433_LAN_PHYMASK BIT(0) +#define RB433_WAN_PHYMASK BIT(4) +#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK) + +static void __init rb433_setup(void) +{ + rb4xx_generic_setup(); + spi_register_board_info(rb4xx_microsd_info, + ARRAY_SIZE(rb4xx_microsd_info)); + + ath79_register_mdio(0, ~RB433_MDIO_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK; + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK; + + ath79_register_eth(1); + ath79_register_eth(0); + + ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", + rb433_setup); + +static void __init rb433u_setup(void) +{ + rb433_setup(); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", + rb433u_setup); + +#define RB450_LAN_PHYMASK BIT(0) +#define RB450_WAN_PHYMASK BIT(4) +#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK) + +static void __init rb450_generic_setup(int gige) +{ + rb4xx_generic_setup(); + ath79_register_mdio(0, ~RB450_MDIO_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); + ath79_eth0_data.phy_if_mode = (gige) ? + PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK; + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); + ath79_eth1_data.phy_if_mode = (gige) ? + PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK; + + ath79_register_eth(1); + ath79_register_eth(0); +} + +static void __init rb450_setup(void) +{ + rb450_generic_setup(0); +} + +MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450", + rb450_setup); + +static void __init rb450g_setup(void) +{ + rb450_generic_setup(1); + spi_register_board_info(rb4xx_microsd_info, + ARRAY_SIZE(rb4xx_microsd_info)); +} + +MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", + rb450g_setup); + +static void __init rb493_setup(void) +{ + rb4xx_generic_setup(); + + ath79_register_mdio(0, 0x3fffff00); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = 0x00000001; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", + rb493_setup); + +#define RB493G_GPIO_MDIO_MDC 7 +#define RB493G_GPIO_MDIO_DATA 8 + +#define RB493G_MDIO_PHYMASK BIT(0) + +static struct mdio_gpio_platform_data rb493g_mdio_data = { + .mdc = RB493G_GPIO_MDIO_MDC, + .mdio = RB493G_GPIO_MDIO_DATA, + + .phy_mask = ~RB493G_MDIO_PHYMASK, +}; + +static struct platform_device rb493g_mdio_device = { + .name = "mdio-gpio", + .id = -1, + .dev = { + .platform_data = &rb493g_mdio_data, + }, +}; + +static void __init rb493g_setup(void) +{ + ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | + AR71XX_GPIO_FUNC_SPI_CS2_EN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), + rb4xx_leds_gpio); + + spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); + platform_device_register(&rb4xx_spi_device); + platform_device_register(&rb4xx_nand_device); + + ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev; + ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + platform_device_register(&rb493g_mdio_device); + + ath79_register_eth(1); + ath79_register_eth(0); + + ath79_register_usb(); + + ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G", + rb493g_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c new file mode 100644 index 0000000000..976617bb36 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c @@ -0,0 +1,154 @@ +/* + * MikroTik RouterBOARD 750 support + * + * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/export.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/mach-rb750.h> + +#include "common.h" +#include "dev-eth.h" +#include "machtypes.h" + +static struct rb750_led_data rb750_leds[] = { + { + .name = "rb750:green:act", + .mask = RB750_LED_ACT, + .active_low = 1, + }, { + .name = "rb750:green:port1", + .mask = RB750_LED_PORT5, + .active_low = 1, + }, { + .name = "rb750:green:port2", + .mask = RB750_LED_PORT4, + .active_low = 1, + }, { + .name = "rb750:green:port3", + .mask = RB750_LED_PORT3, + .active_low = 1, + }, { + .name = "rb750:green:port4", + .mask = RB750_LED_PORT2, + .active_low = 1, + }, { + .name = "rb750:green:port5", + .mask = RB750_LED_PORT1, + .active_low = 1, + } +}; + +static struct rb750_led_platform_data rb750_leds_data = { + .num_leds = ARRAY_SIZE(rb750_leds), + .leds = rb750_leds, +}; + +static struct platform_device rb750_leds_device = { + .name = "leds-rb750", + .dev = { + .platform_data = &rb750_leds_data, + } +}; + +static struct platform_device rb750_nand_device = { + .name = "rb750-nand", + .id = -1, +}; + +int rb750_latch_change(u32 mask_clr, u32 mask_set) +{ + static DEFINE_SPINLOCK(lock); + static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE; + static u32 latch_oe; + static u32 latch_clr; + unsigned long flags; + u32 t; + int ret = 0; + + spin_lock_irqsave(&lock, flags); + + if ((mask_clr & BIT(31)) != 0 && + (latch_set & RB750_LVC573_LE) == 0) { + goto unlock; + } + + latch_set = (latch_set | mask_set) & ~mask_clr; + latch_clr = (latch_clr | mask_clr) & ~mask_set; + + if (latch_oe == 0) + latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE); + + if (likely(latch_set & RB750_LVC573_LE)) { + void __iomem *base = ath79_gpio_base; + + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + t |= mask_clr | latch_oe | mask_set; + + __raw_writel(t, base + AR71XX_GPIO_REG_OE); + __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR); + __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET); + } else if (mask_clr & RB750_LVC573_LE) { + void __iomem *base = ath79_gpio_base; + + latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE); + __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR); + /* flush write */ + __raw_readl(base + AR71XX_GPIO_REG_CLEAR); + } + + ret = 1; + +unlock: + spin_unlock_irqrestore(&lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(rb750_latch_change); + +void rb750_nand_pins_enable(void) +{ + ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, + AR724X_GPIO_FUNC_SPI_EN); +} +EXPORT_SYMBOL_GPL(rb750_nand_pins_enable); + +void rb750_nand_pins_disable(void) +{ + ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN, + AR724X_GPIO_FUNC_JTAG_DISABLE); +} +EXPORT_SYMBOL_GPL(rb750_nand_pins_disable); + +static void __init rb750_setup(void) +{ + ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + + /* WAN port */ + ath79_register_eth(0); + + platform_device_register(&rb750_leds_device); + platform_device_register(&rb750_nand_device); +} + +MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750", + rb750_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c new file mode 100644 index 0000000000..28d9de4f3e --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c @@ -0,0 +1,100 @@ +/* + * Redwave RW2458N support + * + * Copyright (C) 2011-2012 Cezary Jackiewicz <cezary@eko.one.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define RW2458N_GPIO_LED_D3 1 +#define RW2458N_GPIO_LED_D4 0 +#define RW2458N_GPIO_LED_D5 11 +#define RW2458N_GPIO_LED_D6 7 +#define RW2458N_GPIO_BTN_RESET 12 + +#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL) + +static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL, + .gpio = RW2458N_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +#define RW2458N_WAN_PHYMASK BIT(4) + +static struct gpio_led rw2458n_leds_gpio[] __initdata = { + { + .name = "rw2458n:green:d3", + .gpio = RW2458N_GPIO_LED_D3, + .active_low = 1, + }, { + .name = "rw2458n:green:d4", + .gpio = RW2458N_GPIO_LED_D4, + .active_low = 1, + }, { + .name = "rw2458n:green:d5", + .gpio = RW2458N_GPIO_LED_D5, + .active_low = 1, + }, { + .name = "rw2458n:green:d6", + .gpio = RW2458N_GPIO_LED_D6, + .active_low = 1, + } +}; + +static const char *rw2458n_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data rw2458n_flash_data = { + .part_probes = rw2458n_part_probes, +}; + +static void __init rw2458n_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&rw2458n_flash_data); + + ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + + ath79_register_eth(0); + ath79_register_eth(1); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio), + rw2458n_leds_gpio); + + ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rw2458n_gpio_keys), + rw2458n_gpio_keys); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N", + rw2458n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c new file mode 100644 index 0000000000..de2d2a5376 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c @@ -0,0 +1,147 @@ +/* + * TrendNET TEW-632BRP board support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "nvram.h" + +#define TEW_632BRP_GPIO_LED_STATUS 1 +#define TEW_632BRP_GPIO_LED_WPS 3 +#define TEW_632BRP_GPIO_LED_WLAN 6 +#define TEW_632BRP_GPIO_BTN_WPS 12 +#define TEW_632BRP_GPIO_BTN_RESET 21 + +#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL) + +#define TEW_632BRP_CONFIG_ADDR 0x1f020000 +#define TEW_632BRP_CONFIG_SIZE 0x10000 + +static struct mtd_partition tew_632brp_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x020000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x030000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x110000, + .size = 0x2e0000, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x030000, + .size = 0x3c0000, + } +}; + +static struct flash_platform_data tew_632brp_flash_data = { + .parts = tew_632brp_partitions, + .nr_parts = ARRAY_SIZE(tew_632brp_partitions), +}; + +static struct gpio_led tew_632brp_leds_gpio[] __initdata = { + { + .name = "tew-632brp:green:status", + .gpio = TEW_632BRP_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "tew-632brp:blue:wps", + .gpio = TEW_632BRP_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "tew-632brp:green:wlan", + .gpio = TEW_632BRP_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_632BRP_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_632BRP_GPIO_BTN_WPS, + } +}; + +#define TEW_632BRP_LAN_PHYMASK BIT(0) +#define TEW_632BRP_WAN_PHYMASK BIT(4) +#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \ + TEW_632BRP_WAN_PHYMASK)) + +static void __init tew_632brp_setup(void) +{ + const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac[6]; + u8 *wlan_mac = NULL; + + if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE, + "lan_mac=", mac) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + wlan_mac = mac; + } + + ath79_register_mdio(0, TEW_632BRP_MDIO_MASK); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK; + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&tew_632brp_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio), + tew_632brp_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tew_632brp_gpio_keys), + tew_632brp_gpio_keys); + + ath79_register_wmac(eeprom, wlan_mac); +} + +MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP", + tew_632brp_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c new file mode 100644 index 0000000000..f31874ff67 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c @@ -0,0 +1,121 @@ +/* + * TP-LINK TL-MR3020 board support + * + * Copyright (C) 2011 dongyuqi <729650915@qq.com> + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_MR3020_GPIO_LED_3G 27 +#define TL_MR3020_GPIO_LED_WLAN 0 +#define TL_MR3020_GPIO_LED_LAN 17 +#define TL_MR3020_GPIO_LED_WPS 26 + +#define TL_MR3020_GPIO_BTN_WPS 11 +#define TL_MR3020_GPIO_BTN_SW1 18 +#define TL_MR3020_GPIO_BTN_SW2 20 + +#define TL_MR3020_GPIO_USB_POWER 8 + +#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL) + +static const char *tl_mr3020_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_mr3020_flash_data = { + .part_probes = tl_mr3020_part_probes, +}; + +static struct gpio_led tl_mr3020_leds_gpio[] __initdata = { + { + .name = "tp-link:green:3g", + .gpio = TL_MR3020_GPIO_LED_3G, + .active_low = 1, + }, + { + .name = "tp-link:green:wlan", + .gpio = TL_MR3020_GPIO_LED_WLAN, + .active_low = 0, + }, + { + .name = "tp-link:green:lan", + .gpio = TL_MR3020_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "tp-link:green:wps", + .gpio = TL_MR3020_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3020_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "sw1", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3020_GPIO_BTN_SW1, + .active_low = 1, + }, + { + .desc = "sw2", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3020_GPIO_BTN_SW2, + .active_low = 1, + } +}; + +static void __init tl_mr3020_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&tl_mr3020_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio), + tl_mr3020_leds_gpio); + ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_mr3020_gpio_keys), + tl_mr3020_gpio_keys); + + gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power"); + gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1); + ath79_register_usb(); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + ath79_register_mdio(0, 0x0); + ath79_register_eth(0); + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020 v1", + tl_mr3020_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c new file mode 100644 index 0000000000..35515a9b4b --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c @@ -0,0 +1,147 @@ +/* + * TP-LINK TL-MR3220/3420 board support + * + * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define TL_MR3X20_GPIO_LED_QSS 0 +#define TL_MR3X20_GPIO_LED_SYSTEM 1 +#define TL_MR3X20_GPIO_LED_3G 8 + +#define TL_MR3X20_GPIO_BTN_RESET 11 +#define TL_MR3X20_GPIO_BTN_QSS 12 + +#define TL_MR3X20_GPIO_USB_POWER 6 + +#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL) + +static const char *tl_mr3x20_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_mr3x20_flash_data = { + .part_probes = tl_mr3x20_part_probes, +}; + +static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_MR3X20_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_MR3X20_GPIO_LED_QSS, + .active_low = 1, + }, { + .name = "tp-link:green:3g", + .gpio = TL_MR3X20_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3X20_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3X20_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_ap99_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&tl_mr3x20_flash_data); + + ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_mr3x20_gpio_keys), + tl_mr3x20_gpio_keys); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + /* WAN port */ + ath79_register_eth(0); + + ap91_pci_init(ee, mac); +} + +static void __init tl_mr3x20_usb_setup(void) +{ + /* enable power for the USB port */ + gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power"); + gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1); + + ath79_register_usb(); +} + +static void __init tl_mr3220_setup(void) +{ + tl_ap99_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), + tl_mr3x20_leds_gpio); + ap9x_pci_setup_wmac_led_pin(0, 1); + tl_mr3x20_usb_setup(); +} + +MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220", + tl_mr3220_setup); + +static void __init tl_mr3420_setup(void) +{ + tl_ap99_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), + tl_mr3x20_leds_gpio); + ap9x_pci_setup_wmac_led_pin(0, 0); + tl_mr3x20_usb_setup(); +} + +MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", + tl_mr3420_setup); + +static void __init tl_wr841n_v7_setup(void) +{ + tl_ap99_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1, + tl_mr3x20_leds_gpio); + ap9x_pci_setup_wmac_led_pin(0, 0); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7", + "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c new file mode 100644 index 0000000000..b4fb2a9f91 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c @@ -0,0 +1,104 @@ +/* + * TP-LINK TL-WA901N/ND v2 board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> + * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "dev-eth.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WA901ND_V2_GPIO_LED_QSS 4 +#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 +#define TL_WA901ND_V2_GPIO_LED_WLAN 9 + +#define TL_WA901ND_V2_GPIO_BTN_RESET 3 +#define TL_WA901ND_V2_GPIO_BTN_QSS 7 + +#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ + (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) + +static const char *tl_wa901nd_v2_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wa901nd_v2_flash_data = { + .part_probes = tl_wa901nd_v2_part_probes, +}; + +static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WA901ND_V2_GPIO_LED_QSS, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wa901nd_v2_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = 0x00001000; + ath79_register_mdio(0, 0x0); + + ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC | + AR71XX_RESET_GE0_PHY; + ath79_register_eth(0); + + ath79_register_m25p80(&tl_wa901nd_v2_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), + tl_wa901nd_v2_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), + tl_wa901nd_v2_gpio_keys); + + ath79_register_wmac(eeprom, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", + "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c new file mode 100644 index 0000000000..2f4e0c047d --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c @@ -0,0 +1,109 @@ +/* + * TP-LINK TL-WA901N/ND v1 board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define TL_WA901ND_GPIO_LED_QSS 0 +#define TL_WA901ND_GPIO_LED_SYSTEM 1 +#define TL_WA901ND_GPIO_LED_LAN 13 + +#define TL_WA901ND_GPIO_BTN_RESET 11 +#define TL_WA901ND_GPIO_BTN_QSS 12 + +#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) + +static const char *tl_wa901nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wa901nd_flash_data = { + .part_probes = tl_wa901nd_part_probes, +}; + +static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan", + .gpio = TL_WA901ND_GPIO_LED_LAN, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WA901ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WA901ND_GPIO_LED_QSS, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wa901nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + /* + * ath79_eth0 would be the WAN port, but is not connected on + * the TL-WA901ND. ath79_eth1 connects to the internal switch chip, + * however we have a single LAN port only. + */ + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_register_mdio(0, 0x0); + ath79_register_eth(1); + + ath79_register_m25p80(&tl_wa901nd_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), + tl_wa901nd_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wa901nd_gpio_keys), + tl_wa901nd_gpio_keys); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", + tl_wa901nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c new file mode 100644 index 0000000000..e789b402b8 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c @@ -0,0 +1,128 @@ +/* + * TP-LINK TL-WR1043N/ND board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/rtl8366.h> +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WR1043ND_GPIO_LED_USB 1 +#define TL_WR1043ND_GPIO_LED_SYSTEM 2 +#define TL_WR1043ND_GPIO_LED_QSS 5 +#define TL_WR1043ND_GPIO_LED_WLAN 9 + +#define TL_WR1043ND_GPIO_BTN_RESET 3 +#define TL_WR1043ND_GPIO_BTN_QSS 7 + +#define TL_WR1043ND_GPIO_RTL8366_SDA 18 +#define TL_WR1043ND_GPIO_RTL8366_SCK 19 + +#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL) + +static const char *tl_wr1043nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr1043nd_flash_data = { + .part_probes = tl_wr1043nd_part_probes, +}; + +static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:usb", + .gpio = TL_WR1043ND_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR1043ND_GPIO_LED_QSS, + .active_low = 0, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR1043ND_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR1043ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR1043ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = { + .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, + .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, +}; + +static struct platform_device tl_wr1043nd_rtl8366rb_device = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &tl_wr1043nd_rtl8366rb_data, + } +}; + +static void __init tl_wr1043nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_pll_data.pll_1000 = 0x1a000000; + + ath79_register_eth(0); + + ath79_register_usb(); + + ath79_register_m25p80(&tl_wr1043nd_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), + tl_wr1043nd_leds_gpio); + + platform_device_register(&tl_wr1043nd_rtl8366rb_device); + + ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr1043nd_gpio_keys), + tl_wr1043nd_gpio_keys); + + ath79_register_wmac(eeprom, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", + tl_wr1043nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c new file mode 100644 index 0000000000..bb00b72e7d --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c @@ -0,0 +1,130 @@ +/* + * TP-LINK TL-WR2543N/ND board support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/rtl8367.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define TL_WR2543N_GPIO_LED_WPS 0 +#define TL_WR2543N_GPIO_LED_USB 8 + +#define TL_WR2543N_GPIO_BTN_RESET 11 +#define TL_WR2543N_GPIO_BTN_WPS 12 + +#define TL_WR2543N_GPIO_RTL8367_SDA 1 +#define TL_WR2543N_GPIO_RTL8367_SCK 6 + +#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL) + +static const char *tl_wr2543n_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr2543n_flash_data = { + .part_probes = tl_wr2543n_part_probes, + .max_read_len = 64, +}; + +static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { + { + .name = "tp-link:green:usb", + .gpio = TL_WR2543N_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "tp-link:green:wps", + .gpio = TL_WR2543N_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR2543N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR2543N_GPIO_BTN_WPS, + } +}; + +static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = { + .mode = RTL8367_EXTIF_MODE_RGMII, + .txdelay = 1, + .rxdelay = 0, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + }, +}; + +static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = { + .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA, + .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK, + .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg, +}; + +static struct platform_device tl_wr2543n_rtl8367_device = { + .name = RTL8367_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &tl_wr2543n_rtl8367_data, + } +}; + +static void __init tl_wr2543n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&tl_wr2543n_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio), + tl_wr2543n_leds_gpio); + ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr2543n_gpio_keys), + tl_wr2543n_gpio_keys); + ath79_register_usb(); + ap91_pci_init(eeprom, mac); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); + ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_pll_data.pll_1000 = 0x1a000000; + + ath79_register_eth(0); + + platform_device_register(&tl_wr2543n_rtl8367_device); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND", + tl_wr2543n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c new file mode 100644 index 0000000000..badc35af15 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c @@ -0,0 +1,85 @@ +/* + * TP-LINK TL-WR703N board support + * + * Copyright (C) 2011 dongyuqi <729650915@qq.com> + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WR703N_GPIO_LED_SYSTEM 27 +#define TL_WR703N_GPIO_BTN_RESET 11 + +#define TL_WR703N_GPIO_USB_POWER 8 + +#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL) + +static const char *tl_wr703n_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr703n_flash_data = { + .part_probes = tl_wr703n_part_probes, +}; + +static struct gpio_led tl_wr703n_leds_gpio[] __initdata = { + { + .name = "tp-link:blue:system", + .gpio = TL_WR703N_GPIO_LED_SYSTEM, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR703N_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init tl_wr703n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&tl_wr703n_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio), + tl_wr703n_leds_gpio); + ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr703n_gpio_keys), + tl_wr703n_gpio_keys); + + gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power"); + gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1); + ath79_register_usb(); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + ath79_register_mdio(0, 0x0); + ath79_register_eth(0); + + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1", + tl_wr703n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c new file mode 100644 index 0000000000..b8ccdfd60e --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c @@ -0,0 +1,149 @@ +/* + * TP-LINK TL-WR741ND v4 board support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WR741NDV4_GPIO_BTN_RESET 11 +#define TL_WR741NDV4_GPIO_BTN_WPS 26 + +#define TL_WR741NDV4_GPIO_LED_WLAN 0 +#define TL_WR741NDV4_GPIO_LED_QSS 1 +#define TL_WR741NDV4_GPIO_LED_WAN 13 +#define TL_WR741NDV4_GPIO_LED_LAN1 14 +#define TL_WR741NDV4_GPIO_LED_LAN2 15 +#define TL_WR741NDV4_GPIO_LED_LAN3 16 +#define TL_WR741NDV4_GPIO_LED_LAN4 17 + +#define TL_WR741NDV4_GPIO_LED_SYSTEM 27 + +#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL) + +static const char *tl_wr741ndv4_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr741ndv4_flash_data = { + .part_probes = tl_wr741ndv4_part_probes, +}; + +static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan1", + .gpio = TL_WR741NDV4_GPIO_LED_LAN1, + .active_low = 0, + }, { + .name = "tp-link:green:lan2", + .gpio = TL_WR741NDV4_GPIO_LED_LAN2, + .active_low = 0, + }, { + .name = "tp-link:green:lan3", + .gpio = TL_WR741NDV4_GPIO_LED_LAN3, + .active_low = 0, + }, { + .name = "tp-link:green:lan4", + .gpio = TL_WR741NDV4_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR741NDV4_GPIO_LED_QSS, + .active_low = 0, + }, { + .name = "tp-link:green:system", + .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:wan", + .gpio = TL_WR741NDV4_GPIO_LED_WAN, + .active_low = 0, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR741NDV4_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741NDV4_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "WPS", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741NDV4_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init tl_wr741ndv4_gmac_setup(void) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE); + + t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG); + t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP); + __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init tl_wr741ndv4_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + tl_wr741ndv4_gmac_setup(); + + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio), + tl_wr741ndv4_leds_gpio); + + ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr741ndv4_gpio_keys), + tl_wr741ndv4_gpio_keys); + + ath79_register_m25p80(&tl_wr741ndv4_flash_data); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + + ath79_register_mdio(0, 0x0); + ath79_register_eth(1); + ath79_register_eth(0); + + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4", + "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c new file mode 100644 index 0000000000..5931654bbd --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c @@ -0,0 +1,130 @@ +/* + * TP-LINK TL-WR741ND board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define TL_WR741ND_GPIO_LED_QSS 0 +#define TL_WR741ND_GPIO_LED_SYSTEM 1 +#define TL_WR741ND_GPIO_LED_LAN1 13 +#define TL_WR741ND_GPIO_LED_LAN2 14 +#define TL_WR741ND_GPIO_LED_LAN3 15 +#define TL_WR741ND_GPIO_LED_LAN4 16 +#define TL_WR741ND_GPIO_LED_WAN 17 + +#define TL_WR741ND_GPIO_BTN_RESET 11 +#define TL_WR741ND_GPIO_BTN_QSS 12 + +#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL) + +static const char *tl_wr741nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr741nd_flash_data = { + .part_probes = tl_wr741nd_part_probes, +}; + +static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan1", + .gpio = TL_WR741ND_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "tp-link:green:lan2", + .gpio = TL_WR741ND_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "tp-link:green:lan3", + .gpio = TL_WR741ND_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "tp-link:green:lan4", + .gpio = TL_WR741ND_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR741ND_GPIO_LED_QSS, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WR741ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:wan", + .gpio = TL_WR741ND_GPIO_LED_WAN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wr741nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&tl_wr741nd_flash_data); + + ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), + tl_wr741nd_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr741nd_gpio_keys), + tl_wr741nd_gpio_keys); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + + /* WAN port */ + ath79_register_eth(0); + + ap9x_pci_setup_wmac_led_pin(0, 1); + ap91_pci_init(ee, mac); +} +MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", + tl_wr741nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c new file mode 100644 index 0000000000..11f853f057 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c @@ -0,0 +1,140 @@ +/* + * TP-LINK TL-WR841N/ND v1 board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-dsa.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" + +#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2 +#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4 +#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5 + +#define TL_WR841ND_V1_GPIO_BTN_RESET 3 +#define TL_WR841ND_V1_GPIO_BTN_QSS 7 + +#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \ + (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL) + +static struct mtd_partition tl_wr841n_v1_partitions[] = { + { + .name = "redboot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x020000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x160000, + .size = 0x280000, + }, { + .name = "config", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x020000, + .size = 0x3c0000, + } +}; + +static struct flash_platform_data tl_wr841n_v1_flash_data = { + .parts = tl_wr841n_v1_partitions, + .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions), +}; + +static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:red:qss", + .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN, + } +}; + +static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR841ND_V1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR841ND_V1_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static struct dsa_chip_data tl_wr841n_v1_dsa_chip = { + .port_names[0] = "wan", + .port_names[1] = "lan1", + .port_names[2] = "lan2", + .port_names[3] = "lan3", + .port_names[4] = "lan4", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data tl_wr841n_v1_dsa_data = { + .nr_chips = 1, + .chip = &tl_wr841n_v1_dsa_chip, +}; + +static void __init tl_wr841n_v1_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev, + &tl_wr841n_v1_dsa_data); + + ath79_register_m25p80(&tl_wr841n_v1_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio), + tl_wr841n_v1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr841n_v1_gpio_keys), + tl_wr841n_v1_gpio_keys); + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1", + tl_wr841n_v1_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c new file mode 100644 index 0000000000..1ddeec730e --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c @@ -0,0 +1,121 @@ +/* + * TP-LINK TL-WR941ND board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-dsa.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WR941ND_GPIO_LED_SYSTEM 2 +#define TL_WR941ND_GPIO_LED_QSS_RED 4 +#define TL_WR941ND_GPIO_LED_QSS_GREEN 5 +#define TL_WR941ND_GPIO_LED_WLAN 9 + +#define TL_WR941ND_GPIO_BTN_RESET 3 +#define TL_WR941ND_GPIO_BTN_QSS 7 + +#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL) + +static const char *tl_wr941nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr941nd_flash_data = { + .part_probes = tl_wr941nd_part_probes, +}; + +static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_WR941ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:red:qss", + .gpio = TL_WR941ND_GPIO_LED_QSS_RED, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR941ND_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR941ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR941ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static struct dsa_chip_data tl_wr941nd_dsa_chip = { + .port_names[0] = "wan", + .port_names[1] = "lan1", + .port_names[2] = "lan2", + .port_names[3] = "lan3", + .port_names[4] = "lan4", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data tl_wr941nd_dsa_data = { + .nr_chips = 1, + .chip = &tl_wr941nd_dsa_chip, +}; + +static void __init tl_wr941nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev, + &tl_wr941nd_dsa_data); + + ath79_register_m25p80(&tl_wr941nd_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio), + tl_wr941nd_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr941nd_gpio_keys), + tl_wr941nd_gpio_keys); + ath79_register_wmac(eeprom, mac); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", + tl_wr941nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c new file mode 100644 index 0000000000..e49ac23fd1 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c @@ -0,0 +1,205 @@ +/* + * Ubiquiti RouterStation support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008 Ubiquiti <support@ubnt.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +#define UBNT_RS_GPIO_LED_RF 2 +#define UBNT_RS_GPIO_SW4 8 + +#define UBNT_LS_SR71_GPIO_LED_D25 0 +#define UBNT_LS_SR71_GPIO_LED_D26 1 +#define UBNT_LS_SR71_GPIO_LED_D24 2 +#define UBNT_LS_SR71_GPIO_LED_D23 4 +#define UBNT_LS_SR71_GPIO_LED_D22 5 +#define UBNT_LS_SR71_GPIO_LED_D27 6 +#define UBNT_LS_SR71_GPIO_LED_D28 7 + +#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */ +#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL) + +static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { + { + .name = "ubnt:green:rf", + .gpio = UBNT_RS_GPIO_LED_RF, + .active_low = 0, + } +}; + +static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { + { + .name = "ubnt:green:d22", + .gpio = UBNT_LS_SR71_GPIO_LED_D22, + .active_low = 0, + }, { + .name = "ubnt:green:d23", + .gpio = UBNT_LS_SR71_GPIO_LED_D23, + .active_low = 0, + }, { + .name = "ubnt:green:d24", + .gpio = UBNT_LS_SR71_GPIO_LED_D24, + .active_low = 0, + }, { + .name = "ubnt:red:d25", + .gpio = UBNT_LS_SR71_GPIO_LED_D25, + .active_low = 0, + }, { + .name = "ubnt:red:d26", + .gpio = UBNT_LS_SR71_GPIO_LED_D26, + .active_low = 0, + }, { + .name = "ubnt:green:d27", + .gpio = UBNT_LS_SR71_GPIO_LED_D27, + .active_low = 0, + }, { + .name = "ubnt:green:d28", + .gpio = UBNT_LS_SR71_GPIO_LED_D28, + .active_low = 0, + } +}; + +static struct gpio_keys_button ubnt_gpio_keys[] __initdata = { + { + .desc = "sw4", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, + .gpio = UBNT_RS_GPIO_SW4, + .active_low = 1, + } +}; + +static const char *ubnt_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data ubnt_flash_data = { + .part_probes = ubnt_part_probes, +}; + +static void __init ubnt_generic_setup(void) +{ + ath79_register_m25p80(&ubnt_flash_data); + + ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_gpio_keys), + ubnt_gpio_keys); + ath79_register_pci(); +} + +#define UBNT_RS_WAN_PHYMASK BIT(20) +#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) + +static void __init ubnt_rs_setup(void) +{ + ubnt_generic_setup(); + + ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; + + /* + * There is Secondary MAC address duplicate problem with some + * UBNT HW batches. Do not increase Secondary MAC address by 1 + * but do workaround with 'Locally Administrated' bit. + */ + ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.speed = SPEED_100; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_usb(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), + ubnt_rs_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", + ubnt_rs_setup); + +#define UBNT_RSPRO_WAN_PHYMASK BIT(4) +#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) + +static void __init ubnt_rspro_setup(void) +{ + ubnt_generic_setup(); + + ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK | + UBNT_RSPRO_LAN_PHYMASK)); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; + + /* + * There is Secondary MAC address duplicate problem with some + * UBNT HW batches. Do not increase Secondary MAC address by 1 + * but do workaround with 'Locally Administrated' bit. + */ + ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_usb(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), + ubnt_rs_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", + ubnt_rspro_setup); + +static void __init ubnt_lsx_setup(void) +{ + ubnt_generic_setup(); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); + +#define UBNT_LSSR71_PHY_MASK BIT(1) + +static void __init ubnt_lssr71_setup(void) +{ + ubnt_generic_setup(); + + ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; + + ath79_register_eth(0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), + ubnt_ls_sr71_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", + ubnt_lssr71_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c new file mode 100644 index 0000000000..514a69a43f --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c @@ -0,0 +1,165 @@ +/* + * Buffalo WHR-HP-G300N board support + * + * based on ... + * + * TP-LINK TL-WR741ND board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define WHRHPG300N_GPIO_LED_SECURITY 0 +#define WHRHPG300N_GPIO_LED_DIAG 1 +#define WHRHPG300N_GPIO_LED_ROUTER 6 + +#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7 +#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8 +#define WHRHPG300N_GPIO_BTN_RESET 11 +#define WHRHPG300N_GPIO_BTN_AOSS 12 + +#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL) + +#define WHRHPG300N_MAC_OFFSET 0x20c + +static struct mtd_partition whrhpg300n_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x03e000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x03e000, + .size = 0x002000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "user_property", + .offset = 0x3e0000, + .size = 0x010000, + }, { + .name = "ART", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; + +static struct flash_platform_data whrhpg300n_flash_data = { + .parts = whrhpg300n_partitions, + .nr_parts = ARRAY_SIZE(whrhpg300n_partitions), +}; + +static struct gpio_led whrhpg300n_leds_gpio[] __initdata = { + { + .name = "buffalo:orange:security", + .gpio = WHRHPG300N_GPIO_LED_SECURITY, + .active_low = 1, + }, { + .name = "buffalo:red:diag", + .gpio = WHRHPG300N_GPIO_LED_DIAG, + .active_low = 1, + }, { + .name = "buffalo:green:router", + .gpio = WHRHPG300N_GPIO_LED_ROUTER, + .active_low = 1, + } +}; + +static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHRHPG300N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "aoss/wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .gpio = WHRHPG300N_GPIO_BTN_AOSS, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .active_low = 1, + }, { + .desc = "router_on", + .type = EV_KEY, + .code = BTN_2, + .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .active_low = 1, + }, { + .desc = "router_auto", + .type = EV_KEY, + .code = BTN_3, + .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .active_low = 1, + } +}; + +static void __init whrhpg300n_setup(void) +{ + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET); + + ath79_register_m25p80(&whrhpg300n_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio), + whrhpg300n_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(whrhpg300n_gpio_keys), + whrhpg300n_gpio_keys); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + /* WAN port */ + ath79_register_eth(0); + + ap9x_pci_setup_wmac_led_pin(0, 1); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N", + whrhpg300n_setup); + +MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N", + whrhpg300n_setup); + +MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN", + whrhpg300n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c new file mode 100644 index 0000000000..fccf1c6633 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c @@ -0,0 +1,172 @@ +/* + * Netgear WNDR3700 board support + * + * Copyright (C) 2009 Marco Porsch + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> +#include <linux/rtl8366.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define WNDR3700_GPIO_LED_WPS_ORANGE 0 +#define WNDR3700_GPIO_LED_POWER_ORANGE 1 +#define WNDR3700_GPIO_LED_POWER_GREEN 2 +#define WNDR3700_GPIO_LED_WPS_GREEN 4 +#define WNDR3700_GPIO_LED_WAN_GREEN 6 + +#define WNDR3700_GPIO_BTN_WPS 3 +#define WNDR3700_GPIO_BTN_RESET 8 +#define WNDR3700_GPIO_BTN_WIFI 11 + +#define WNDR3700_GPIO_RTL8366_SDA 5 +#define WNDR3700_GPIO_RTL8366_SCK 7 + +#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL) + +#define WNDR3700_ETH0_MAC_OFFSET 0 +#define WNDR3700_ETH1_MAC_OFFSET 0x6 + +#define WNDR3700_WMAC0_MAC_OFFSET 0 +#define WNDR3700_WMAC1_MAC_OFFSET 0xc +#define WNDR3700_CALDATA0_OFFSET 0x1000 +#define WNDR3700_CALDATA1_OFFSET 0x5000 + +static struct gpio_led wndr3700_leds_gpio[] __initdata = { + { + .name = "wndr3700:green:power", + .gpio = WNDR3700_GPIO_LED_POWER_GREEN, + .active_low = 1, + }, { + .name = "wndr3700:orange:power", + .gpio = WNDR3700_GPIO_LED_POWER_ORANGE, + .active_low = 1, + }, { + .name = "wndr3700:green:wps", + .gpio = WNDR3700_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, { + .name = "wndr3700:orange:wps", + .gpio = WNDR3700_GPIO_LED_WPS_ORANGE, + .active_low = 1, + }, { + .name = "wndr3700:green:wan", + .gpio = WNDR3700_GPIO_LED_WAN_GREEN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNDR3700_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNDR3700_GPIO_BTN_WPS, + .active_low = 1, + }, { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNDR3700_GPIO_BTN_WIFI, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data wndr3700_rtl8366s_data = { + .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, + .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, +}; + +static struct platform_device wndr3700_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wndr3700_rtl8366s_data, + } +}; + +static void __init wndr3700_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + /* + * The eth0 and wmac0 interfaces share the same MAC address which + * can lead to problems if operated unbridged. Set the locally + * administered bit on the eth0 MAC to make it unique. + */ + ath79_init_local_mac(ath79_eth0_data.mac_addr, + art + WNDR3700_ETH0_MAC_OFFSET); + ath79_eth0_pll_data.pll_1000 = 0x11110000; + ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_init_mac(ath79_eth1_data.mac_addr, + art + WNDR3700_ETH1_MAC_OFFSET, 0); + ath79_eth1_pll_data.pll_1000 = 0x11110000; + ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_usb(); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), + wndr3700_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wndr3700_gpio_keys), + wndr3700_gpio_keys); + + platform_device_register(&wndr3700_rtl8366s_device); + platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0); + + ap9x_pci_setup_wmac_led_pin(0, 5); + ap9x_pci_setup_wmac_led_pin(1, 5); + + /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */ + ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6)); + + /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */ + ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6)); + + ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET, + art + WNDR3700_WMAC0_MAC_OFFSET, + art + WNDR3700_CALDATA1_OFFSET, + art + WNDR3700_WMAC1_MAC_OFFSET); +} + +MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700", + "NETGEAR WNDR3700/WNDR3800/WNDRMAC", + wndr3700_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c new file mode 100644 index 0000000000..bd86db386a --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c @@ -0,0 +1,145 @@ +/* + * NETGEAR WNR2000 board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WNR2000_GPIO_LED_PWR_GREEN 14 +#define WNR2000_GPIO_LED_PWR_AMBER 7 +#define WNR2000_GPIO_LED_WPS 4 +#define WNR2000_GPIO_LED_WLAN 6 +#define WNR2000_GPIO_BTN_RESET 21 +#define WNR2000_GPIO_BTN_WPS 8 + +#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL) + +static struct mtd_partition wnr2000_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x240000, + }, { + .name = "user-config", + .offset = 0x290000, + .size = 0x010000, + }, { + .name = "uImage", + .offset = 0x2a0000, + .size = 0x120000, + }, { + .name = "language_table", + .offset = 0x3c0000, + .size = 0x020000, + }, { + .name = "rootfs_checksum", + .offset = 0x3e0000, + .size = 0x010000, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data wnr2000_flash_data = { + .parts = wnr2000_partitions, + .nr_parts = ARRAY_SIZE(wnr2000_partitions), +}; + +static struct gpio_led wnr2000_leds_gpio[] __initdata = { + { + .name = "wnr2000:green:power", + .gpio = WNR2000_GPIO_LED_PWR_GREEN, + .active_low = 1, + }, { + .name = "wnr2000:amber:power", + .gpio = WNR2000_GPIO_LED_PWR_AMBER, + .active_low = 1, + }, { + .name = "wnr2000:green:wps", + .gpio = WNR2000_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "wnr2000:blue:wlan", + .gpio = WNR2000_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000_GPIO_BTN_WPS, + } +}; + +static void __init wnr2000_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.has_ar8216 = 1; + + ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&wnr2000_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio), + wnr2000_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wnr2000_gpio_keys), + wnr2000_gpio_keys); + + ath79_register_wmac(eeprom, NULL); +} + +MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c new file mode 100644 index 0000000000..148cd7c7f2 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c @@ -0,0 +1,107 @@ +/* + * Compex WP543/WPJ543 board support + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" +#include "pci.h" + +#define WP543_GPIO_SW6 2 +#define WP543_GPIO_LED_1 3 +#define WP543_GPIO_LED_2 4 +#define WP543_GPIO_LED_WLAN 5 +#define WP543_GPIO_LED_CONN 6 +#define WP543_GPIO_LED_DIAG 7 +#define WP543_GPIO_SW4 8 + +#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL) + +static struct gpio_led wp543_leds_gpio[] __initdata = { + { + .name = "wp543:green:led1", + .gpio = WP543_GPIO_LED_1, + .active_low = 1, + }, { + .name = "wp543:green:led2", + .gpio = WP543_GPIO_LED_2, + .active_low = 1, + }, { + .name = "wp543:green:wlan", + .gpio = WP543_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "wp543:green:conn", + .gpio = WP543_GPIO_LED_CONN, + .active_low = 1, + }, { + .name = "wp543:green:diag", + .gpio = WP543_GPIO_LED_DIAG, + .active_low = 1, + } +}; + +static struct gpio_keys_button wp543_gpio_keys[] __initdata = { + { + .desc = "sw6", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, + .gpio = WP543_GPIO_SW6, + }, { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, + .gpio = WP543_GPIO_SW4, + } +}; + +static const char *wp543_part_probes[] = { + "MyLoader", + NULL, +}; + +static struct flash_platform_data wp543_flash_data = { + .part_probes = wp543_part_probes, +}; + +static void __init wp543_setup(void) +{ + ath79_register_m25p80(&wp543_flash_data); + + ath79_register_mdio(0, 0xfffffff0); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = 0x0f; + ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC | + AR71XX_RESET_GE0_PHY; + ath79_register_eth(0); + + ath79_register_usb(); + ath79_register_pci(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), + wp543_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wp543_gpio_keys), + wp543_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c new file mode 100644 index 0000000000..21aefe00a0 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c @@ -0,0 +1,126 @@ +/* + * Linksys WRT160NL board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "nvram.h" +#include "machtypes.h" + +#define WRT160NL_GPIO_LED_POWER 14 +#define WRT160NL_GPIO_LED_WPS_AMBER 9 +#define WRT160NL_GPIO_LED_WPS_BLUE 8 +#define WRT160NL_GPIO_LED_WLAN 6 + +#define WRT160NL_GPIO_BTN_WPS 7 +#define WRT160NL_GPIO_BTN_RESET 21 + +#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL) + +#define WRT160NL_NVRAM_ADDR 0x1f7e0000 +#define WRT160NL_NVRAM_SIZE 0x10000 + +static const char *wrt160nl_part_probes[] = { + "wrt160nl", + NULL, +}; + +static struct flash_platform_data wrt160nl_flash_data = { + .part_probes = wrt160nl_part_probes, +}; + +static struct gpio_led wrt160nl_leds_gpio[] __initdata = { + { + .name = "wrt160nl:blue:power", + .gpio = WRT160NL_GPIO_LED_POWER, + .active_low = 1, + .default_trigger = "default-on", + }, { + .name = "wrt160nl:amber:wps", + .gpio = WRT160NL_GPIO_LED_WPS_AMBER, + .active_low = 1, + }, { + .name = "wrt160nl:blue:wps", + .gpio = WRT160NL_GPIO_LED_WPS_BLUE, + .active_low = 1, + }, { + .name = "wrt160nl:blue:wlan", + .gpio = WRT160NL_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, + .gpio = WRT160NL_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, + .gpio = WRT160NL_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init wrt160nl_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac[6]; + + if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, + "lan_hwaddr=", mac) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + } + + ath79_register_mdio(0, 0x0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.phy_mask = 0x01; + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&wrt160nl_flash_data); + + ath79_register_usb(); + + if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, + "wl0_hwaddr=", mac) == 0) + ath79_register_wmac(eeprom, mac); + else + ath79_register_wmac(eeprom, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio), + wrt160nl_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wrt160nl_gpio_keys), + wrt160nl_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL", + wrt160nl_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c new file mode 100644 index 0000000000..6c4c1cb0d6 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c @@ -0,0 +1,161 @@ +/* + * Linksys WRT400N board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" + +#define WRT400N_GPIO_LED_POWER 1 +#define WRT400N_GPIO_LED_WPS_BLUE 4 +#define WRT400N_GPIO_LED_WPS_AMBER 5 +#define WRT400N_GPIO_LED_WLAN 6 + +#define WRT400N_GPIO_BTN_RESET 8 +#define WRT400N_GPIO_BTN_WLSEC 3 + +#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) + +#define WRT400N_MAC_ADDR_OFFSET 0x120c +#define WRT400N_CALDATA0_OFFSET 0x1000 +#define WRT400N_CALDATA1_OFFSET 0x5000 + +static struct mtd_partition wrt400n_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "linux", + .offset = 0x040000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x180000, + .size = 0x630000, + }, { + .name = "nvram", + .offset = 0x7b0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x7c0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "language", + .offset = 0x7d0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "caldata", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x770000, + } +}; + +static struct flash_platform_data wrt400n_flash_data = { + .parts = wrt400n_partitions, + .nr_parts = ARRAY_SIZE(wrt400n_partitions), +}; + +static struct gpio_led wrt400n_leds_gpio[] __initdata = { + { + .name = "wrt400n:blue:wps", + .gpio = WRT400N_GPIO_LED_WPS_BLUE, + .active_low = 1, + }, { + .name = "wrt400n:amber:wps", + .gpio = WRT400N_GPIO_LED_WPS_AMBER, + .active_low = 1, + }, { + .name = "wrt400n:blue:wlan", + .gpio = WRT400N_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "wrt400n:blue:power", + .gpio = WRT400N_GPIO_LED_POWER, + .active_low = 0, + .default_trigger = "default-on", + } +}; + +static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, + .gpio = WRT400N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wlsec", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, + .gpio = WRT400N_GPIO_BTN_WLSEC, + .active_low = 1, + } +}; + +static void __init wrt400n_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&wrt400n_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), + wrt400n_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wrt400n_gpio_keys), + wrt400n_gpio_keys); + + ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, + art + WRT400N_CALDATA1_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c new file mode 100644 index 0000000000..1223e842d8 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c @@ -0,0 +1,158 @@ +/* + * Buffalo WZR-HP-AG300H board support + * + * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define WZRHPAG300H_MAC_OFFSET 0x20c +#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL) + +static struct mtd_partition wzrhpag300h_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e90000, + }, { + .name = "user_property", + .offset = 0x1ff0000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f90000, + } +}; + +static struct flash_platform_data wzrhpag300h_flash_data = { + .parts = wzrhpag300h_flash_partitions, + .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions), +}; + +static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = { + { + .name = "buffalo:red:diag", + .gpio = 1, + .active_low = 1, + }, +}; + +static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 11, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 3, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 5, + .active_low = 1, + }, { + .desc = "router_auto", + .type = EV_KEY, + .code = BTN_6, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 6, + .active_low = 1, + }, { + .desc = "router_off", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 7, + .active_low = 1, + } +}; + +static void __init wzrhpag300h_setup(void) +{ + u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000); + u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000); + u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET; + u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET; + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1); + + ath79_register_mdio(0, ~(BIT(0) | BIT(4))); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = BIT(4); + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_usb(); + gpio_request(2, "usb"); + gpio_direction_output(2, 1); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio), + wzrhpag300h_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpag300h_gpio_keys), + wzrhpag300h_gpio_keys); + + ath79_register_m25p80_multi(&wzrhpag300h_flash_data); + + ap94_pci_init(eeprom1, mac1, eeprom2, mac2); +} + +MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", + "Buffalo WZR-HP-AG300H", wzrhpag300h_setup); + diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c new file mode 100644 index 0000000000..94f352aced --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c @@ -0,0 +1,287 @@ +/* + * Buffalo WZR-HP-G300NH board support + * + * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/nxp_74hc153.h> +#include <linux/rtl8366.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WZRHPG300NH_GPIO_LED_USB 0 +#define WZRHPG300NH_GPIO_LED_DIAG 1 +#define WZRHPG300NH_GPIO_LED_WIRELESS 6 +#define WZRHPG300NH_GPIO_LED_SECURITY 17 +#define WZRHPG300NH_GPIO_LED_ROUTER 18 + +#define WZRHPG300NH_GPIO_RTL8366_SDA 19 +#define WZRHPG300NH_GPIO_RTL8366_SCK 20 + +#define WZRHPG300NH_GPIO_74HC153_S0 9 +#define WZRHPG300NH_GPIO_74HC153_S1 11 +#define WZRHPG300NH_GPIO_74HC153_1Y 12 +#define WZRHPG300NH_GPIO_74HC153_2Y 14 + +#define WZRHPG300NH_GPIO_EXP_BASE 32 +#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0) +#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1) +#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2) +#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3) +#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5) +#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6) +#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7) + +#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL) + +#define WZRHPG300NH_MAC_OFFSET 0x20c + +static struct mtd_partition wzrhpg300nh_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e60000, + }, { + .name = "user_property", + .offset = 0x1fc0000, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x1fe0000, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f60000, + } +}; + +static struct physmap_flash_data wzrhpg300nh_flash_data = { + .width = 2, + .parts = wzrhpg300nh_flash_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions), +}; + +#define WZRHPG300NH_FLASH_BASE 0x1e000000 +#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024) + +static struct resource wzrhpg300nh_flash_resources[] = { + [0] = { + .start = WZRHPG300NH_FLASH_BASE, + .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device wzrhpg300nh_flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = wzrhpg300nh_flash_resources, + .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources), + .dev = { + .platform_data = &wzrhpg300nh_flash_data, + } +}; + +static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = { + { + .name = "buffalo:orange:security", + .gpio = WZRHPG300NH_GPIO_LED_SECURITY, + .active_low = 1, + }, { + .name = "buffalo:green:wireless", + .gpio = WZRHPG300NH_GPIO_LED_WIRELESS, + .active_low = 1, + }, { + .name = "buffalo:green:router", + .gpio = WZRHPG300NH_GPIO_LED_ROUTER, + .active_low = 1, + }, { + .name = "buffalo:red:diag", + .gpio = WZRHPG300NH_GPIO_LED_DIAG, + .active_low = 1, + }, { + .name = "buffalo:blue:usb", + .gpio = WZRHPG300NH_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_AOSS, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_USB, + .active_low = 1, + }, { + .desc = "qos_on", + .type = EV_KEY, + .code = BTN_3, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON, + .active_low = 0, + }, { + .desc = "qos_off", + .type = EV_KEY, + .code = BTN_4, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF, + .active_low = 0, + }, { + .desc = "router_on", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON, + .active_low = 0, + }, { + .desc = "router_auto", + .type = EV_KEY, + .code = BTN_6, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO, + .active_low = 0, + } +}; + +static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = { + .gpio_base = WZRHPG300NH_GPIO_EXP_BASE, + .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0, + .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1, + .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y, + .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y, +}; + +static struct platform_device wzrhpg300nh_74hc153_device = { + .name = NXP_74HC153_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wzrhpg300nh_74hc153_data, + } +}; + +static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = { + .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA, + .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK, +}; + +static struct platform_device wzrhpg300nh_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wzrhpg300nh_rtl8366_data, + } +}; + +static struct platform_device wzrhpg300nh_rtl8366rb_device = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wzrhpg300nh_rtl8366_data, + } +}; + +static void __init wzrhpg300nh_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET; + bool hasrtl8366rb = false; + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB) + hasrtl8366rb = true; + + if (hasrtl8366rb) { + ath79_eth0_pll_data.pll_1000 = 0x1f000000; + ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; + ath79_eth1_pll_data.pll_1000 = 0x100; + ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; + } else { + ath79_eth0_pll_data.pll_1000 = 0x1e000100; + ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; + ath79_eth1_pll_data.pll_1000 = 0x1e000100; + ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; + } + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_usb(); + ath79_register_wmac(eeprom, NULL); + + platform_device_register(&wzrhpg300nh_74hc153_device); + platform_device_register(&wzrhpg300nh_flash_device); + + if (hasrtl8366rb) + platform_device_register(&wzrhpg300nh_rtl8366rb_device); + else + platform_device_register(&wzrhpg300nh_rtl8366s_device); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio), + wzrhpg300nh_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpg300nh_gpio_keys), + wzrhpg300nh_gpio_keys); + +} + +MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", + "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c new file mode 100644 index 0000000000..6ccafcb49d --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c @@ -0,0 +1,177 @@ +/* + * Buffalo WZR-HP-G300NH2 board support + * + * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define WZRHPG300NH2_MAC_OFFSET 0x20c +#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL) + +static struct mtd_partition wzrhpg300nh2_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e90000, + }, { + .name = "user_property", + .offset = 0x1ff0000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f90000, + } +}; + +static struct flash_platform_data wzrhpg300nh2_flash_data = { + .parts = wzrhpg300nh2_flash_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions), +}; + +static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = { + { + .name = "buffalo:red:diag", + .gpio = 16, + .active_low = 1, + }, +}; + +static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { + { + .name = "buffalo:blue:usb", + .gpio = 4, + .active_low = 1, + }, + { + .name = "buffalo:orange:security", + .gpio = 6, + .active_low = 1, + }, + { + .name = "buffalo:green:router", + .gpio = 7, + .active_low = 1, + }, + { + .name = "buffalo:blue:movie_engine_on", + .gpio = 8, + .active_low = 1, + }, + { + .name = "buffalo:blue:movie_engine_off", + .gpio = 9, + .active_low = 1, + }, +}; + +/* The AOSS button is wmac gpio 12 */ +static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 1, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 7, + .active_low = 1, + }, { + .desc = "qos", + .type = EV_KEY, + .code = BTN_3, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 11, + .active_low = 0, + }, { + .desc = "router_on", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 8, + .active_low = 0, + }, +}; + +static void __init wzrhpg300nh2_setup(void) +{ + + u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000); + u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET; + /* There is an eth1 but it is not connected to the switch */ + + ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); + ath79_register_mdio(0, ~(BIT(0))); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + + ath79_register_eth(0); + ath79_register_usb(); + /* gpio13 is usb power. Turn it on. */ + gpio_request(13, "usb"); + gpio_direction_output(13, 1); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio), + wzrhpg300nh2_leds_gpio); + ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpg300nh2_gpio_keys), + wzrhpg300nh2_gpio_keys); + ap9x_pci_setup_wmac_led_pin(0, 5); + ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio, + ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); + + ap91_pci_init(eeprom, mac0); +} + +MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2", + "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c new file mode 100644 index 0000000000..f606145573 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c @@ -0,0 +1,170 @@ +/* + * Buffalo WZR-HP-G450G board support + * + * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-m25p80.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" +#include "machtypes.h" + +#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL) + +static struct mtd_partition wzrhpg450h_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + }, { + .name = "ART", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "uImage", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e80000, + }, { + .name = "user_property", + .offset = 0x1fe0000, + .size = 0x0020000, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f80000, + } +}; + +static struct flash_platform_data wzrhpg450h_flash_data = { + .parts = wzrhpg450h_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), +}; + +static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = { + { + .name = "buffalo:red:diag", + .gpio = 14, + .active_low = 1, + }, + { + .name = "buffalo:orange:security", + .gpio = 13, + .active_low = 1, + }, +}; + + +static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = { + { + .name = "buffalo:blue:movie_engine", + .gpio = 13, + .active_low = 1, + }, + { + .name = "buffalo:green:router", + .gpio = 14, + .active_low = 1, + }, +}; + +static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 6, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 1, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 8, + .active_low = 1, + }, { + .desc = "movie_engine", + .type = EV_KEY, + .code = BTN_6, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 7, + .active_low = 0, + }, { + .desc = "router_off", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 0, + } +}; + + +static void __init wzrhpg450h_init(void) +{ + u8 *ee = (u8 *) KSEG1ADDR(0x1f051000); + u8 *mac = (u8 *) ee + 2; + + ath79_register_m25p80_multi(&wzrhpg450h_flash_data); + + ath79_register_mdio(0, ~BIT(0)); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio), + wzrhpg450h_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpg450h_gpio_keys), + wzrhpg450h_gpio_keys); + + ath79_register_eth(0); + + ath79_register_usb(); + gpio_request(16, "usb"); + gpio_direction_output(16, 1); + + ap91_pci_init(ee, NULL); + ap9x_pci_setup_wmac_led_pin(0, 15); + ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio, + ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio)); +} + +MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H", + wzrhpg450h_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c new file mode 100644 index 0000000000..af6db6ad60 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c @@ -0,0 +1,206 @@ +/* + * Zcomax ZCN-1523H-2-8/5-16 board support + * + * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-m25p80.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "machtypes.h" + +#define ZCN_1523H_GPIO_BTN_RESET 0 +#define ZCN_1523H_GPIO_LED_INIT 11 +#define ZCN_1523H_GPIO_LED_LAN1 17 + +#define ZCN_1523H_2_GPIO_LED_WEAK 13 +#define ZCN_1523H_2_GPIO_LED_MEDIUM 14 +#define ZCN_1523H_2_GPIO_LED_STRONG 15 + +#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1 +#define ZCN_1523H_5_GPIO_LED_LAN2 13 +#define ZCN_1523H_5_GPIO_LED_WEAK 14 +#define ZCN_1523H_5_GPIO_LED_MEDIUM 15 +#define ZCN_1523H_5_GPIO_LED_STRONG 16 + +#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL) + +static struct mtd_partition zcn_1523h_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x610000, + }, { + .name = "kernel", + .offset = 0x660000, + .size = 0x170000, + }, { + .name = "configure", + .offset = 0x7d0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "mfg", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "eeprom", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x780000, + } +}; + +static struct flash_platform_data zcn_1523h_flash_data = { + .parts = zcn_1523h_partitions, + .nr_parts = ARRAY_SIZE(zcn_1523h_partitions), +}; + +static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL, + .gpio = ZCN_1523H_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct gpio_led zcn_1523h_leds_gpio[] __initdata = { + { + .name = "zcn-1523h:amber:init", + .gpio = ZCN_1523H_GPIO_LED_INIT, + .active_low = 1, + }, { + .name = "zcn-1523h:green:lan1", + .gpio = ZCN_1523H_GPIO_LED_LAN1, + .active_low = 1, + } +}; + +static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = { + { + .name = "zcn-1523h:red:weak", + .gpio = ZCN_1523H_2_GPIO_LED_WEAK, + .active_low = 1, + }, { + .name = "zcn-1523h:amber:medium", + .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM, + .active_low = 1, + }, { + .name = "zcn-1523h:green:strong", + .gpio = ZCN_1523H_2_GPIO_LED_STRONG, + .active_low = 1, + } +}; + +static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = { + { + .name = "zcn-1523h:red:weak", + .gpio = ZCN_1523H_5_GPIO_LED_WEAK, + .active_low = 1, + }, { + .name = "zcn-1523h:amber:medium", + .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM, + .active_low = 1, + }, { + .name = "zcn-1523h:green:strong", + .gpio = ZCN_1523H_5_GPIO_LED_STRONG, + .active_low = 1, + }, { + .name = "zcn-1523h:green:lan2", + .gpio = ZCN_1523H_5_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "zcn-1523h:amber:unknown", + .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN, + } +}; + +static void __init zcn_1523h_generic_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_register_m25p80(&zcn_1523h_flash_data); + + ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio), + zcn_1523h_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL, + ARRAY_SIZE(zcn_1523h_gpio_keys), + zcn_1523h_gpio_keys); + + ap91_pci_init(ee, mac); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + ath79_register_mdio(0, 0x0); + + /* LAN1 port */ + ath79_register_eth(0); +} + +static void __init zcn_1523h_2_setup(void) +{ + zcn_1523h_generic_setup(); + ap9x_pci_setup_wmac_gpio(0, BIT(9), 0); + + ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio), + zcn_1523h_2_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2", + zcn_1523h_2_setup); + +static void __init zcn_1523h_5_setup(void) +{ + zcn_1523h_generic_setup(); + ap9x_pci_setup_wmac_gpio(0, BIT(8), 0); + + ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio), + zcn_1523h_5_leds_gpio); + + /* LAN2 port */ + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5", + zcn_1523h_5_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c new file mode 100644 index 0000000000..43911b8ac1 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c @@ -0,0 +1,75 @@ +/* + * Atheros AR71xx minimal nvram support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/vmalloc.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/string.h> + +#include "nvram.h" + +char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len) +{ + unsigned len = strlen(name); + char *cur, *last; + + if (buf_len == 0 || len == 0) + return NULL; + + if (buf_len < len) + return NULL; + + if (len == 1) + return memchr(buf, (int) *name, buf_len); + + last = (char *) buf + buf_len - len; + for (cur = (char *) buf; cur <= last; cur++) + if (cur[0] == name[0] && memcmp(cur, name, len) == 0) + return cur + len; + + return NULL; +} + +int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, + const char *name, char *mac) +{ + char *buf; + char *mac_str; + int ret; + int t; + + buf = vmalloc(nvram_len); + if (!buf) + return -ENOMEM; + + memcpy(buf, nvram, nvram_len); + buf[nvram_len - 1] = '\0'; + + mac_str = ath79_nvram_find_var(name, buf, nvram_len); + if (!mac_str) { + ret = -EINVAL; + goto free; + } + + t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); + + if (t != 6) { + ret = -EINVAL; + goto free; + } + + ret = 0; + +free: + vfree(buf); + return ret; +} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h new file mode 100644 index 0000000000..75151d4a3c --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h @@ -0,0 +1,19 @@ +/* + * Atheros AR71xx minimal nvram support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_NVRAM_H +#define _ATH79_NVRAM_H + +char *ath79_nvram_find_var(const char *name, const char *buf, + unsigned buf_len); +int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, + const char *name, char *mac); + +#endif /* _ATH79_NVRAM_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c new file mode 100644 index 0000000000..c395fb434f --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c @@ -0,0 +1,124 @@ +/* + * Atheros AP94 reference board PCI initialization + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/delay.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/pci.h> + +struct ath9k_fixup { + u16 *cal_data; + unsigned slot; +}; + +static int ath9k_num_fixups; +static struct ath9k_fixup ath9k_fixups[2]; + +static void ath9k_pci_fixup(struct pci_dev *dev) +{ + void __iomem *mem; + u16 *cal_data = NULL; + u16 cmd; + u32 bar0; + u32 val; + unsigned i; + + for (i = 0; i < ath9k_num_fixups; i++) { + if (ath9k_fixups[i].cal_data == NULL) + continue; + + if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) + continue; + + cal_data = ath9k_fixups[i].cal_data; + break; + } + + if (cal_data == NULL) + return; + + if (*cal_data != 0xa55a) { + pr_err("pci %s: invalid calibration data\n", pci_name(dev)); + return; + } + + pr_info("pci %s: fixup device configuration\n", pci_name(dev)); + + mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); + if (!mem) { + pr_err("pci %s: ioremap error\n", pci_name(dev)); + return; + } + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); + + switch (ath79_soc) { + case ATH79_SOC_AR7161: + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + AR71XX_PCI_MEM_BASE); + break; + case ATH79_SOC_AR7240: + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); + break; + + case ATH79_SOC_AR7241: + case ATH79_SOC_AR7242: + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); + break; + + default: + BUG(); + } + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + /* set pointer to first reg address */ + cal_data += 3; + while (*cal_data != 0xffff) { + u32 reg; + reg = *cal_data++; + val = *cal_data++; + val |= (*cal_data++) << 16; + + __raw_writel(val, mem + reg); + udelay(100); + } + + pci_read_config_dword(dev, PCI_VENDOR_ID, &val); + dev->vendor = val & 0xffff; + dev->device = (val >> 16) & 0xffff; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); + dev->revision = val & 0xff; + dev->class = val >> 8; /* upper 3 bytes */ + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + + iounmap(mem); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); + +void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) +{ + if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) + return; + + ath9k_fixups[ath9k_num_fixups].slot = slot; + ath9k_fixups[ath9k_num_fixups].cal_data = cal_data; + ath9k_num_fixups++; +} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h new file mode 100644 index 0000000000..5794941f08 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h @@ -0,0 +1,6 @@ +#ifndef _PCI_ATH9K_FIXUP +#define _PCI_ATH9K_FIXUP + +void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init; + +#endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h new file mode 100644 index 0000000000..43e67557ae --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h @@ -0,0 +1,54 @@ +/* + * Atheros AR71xx SoC specific platform data definitions + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_ATH79_PLATFORM_H +#define __ASM_MACH_ATH79_PLATFORM_H + +#include <linux/if_ether.h> +#include <linux/skbuff.h> +#include <linux/phy.h> +#include <linux/spi/spi.h> + +struct ag71xx_switch_platform_data { + u8 phy4_mii_en:1; +}; + +struct ag71xx_platform_data { + phy_interface_t phy_if_mode; + u32 phy_mask; + int speed; + int duplex; + u32 reset_bit; + u8 mac_addr[ETH_ALEN]; + struct device *mii_bus_dev; + + u8 has_gbit:1; + u8 is_ar91xx:1; + u8 is_ar7240:1; + u8 is_ar724x:1; + u8 has_ar8216:1; + + struct ag71xx_switch_platform_data *switch_data; + + void (*ddr_flush)(void); + void (*set_speed)(int speed); + + u32 fifo_cfg1; + u32 fifo_cfg2; + u32 fifo_cfg3; +}; + +struct ag71xx_mdio_platform_data { + u32 phy_mask; + int is_ar7240; +}; + +#endif /* __ASM_MACH_ATH79_PLATFORM_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ar913x_flash.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ar913x_flash.h new file mode 100644 index 0000000000..d19c6b885f --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ar913x_flash.h @@ -0,0 +1,24 @@ +/* + * AR913x parallel flash driver platform data definitions + * + * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __AR913X_FLASH_H +#define __AR913X_FLASH_H + +struct mtd_partition; + +struct ar913x_flash_platform_data { + unsigned int width; + u8 is_shared:1; + unsigned int nr_parts; + struct mtd_partition *parts; +}; + +#endif /* __AR913X_FLASH_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h new file mode 100644 index 0000000000..3e6fc50c55 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h @@ -0,0 +1,68 @@ +/* + * MikroTik RouterBOARD 750 definitions + * + * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef _MACH_RB750_H +#define _MACH_RB750_H + +#include <linux/bitops.h> + +#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */ +#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */ +#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */ +#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */ +#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */ +#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */ +#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */ +#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */ +#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */ +#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */ +#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */ +#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */ +#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */ +#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */ +#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */ + +#define RB750_GPIO_BTN_RESET 1 +#define RB750_GPIO_SPI_CS0 2 +#define RB750_GPIO_LED_ACT 12 +#define RB750_GPIO_LED_PORT1 13 +#define RB750_GPIO_LED_PORT2 14 +#define RB750_GPIO_LED_PORT3 15 +#define RB750_GPIO_LED_PORT4 16 +#define RB750_GPIO_LED_PORT5 17 + +#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT) +#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1) +#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2) +#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3) +#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4) +#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5) + +#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE) + +#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \ + RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT) + +struct rb750_led_data { + char *name; + char *default_trigger; + u32 mask; + int active_low; +}; + +struct rb750_led_platform_data { + int num_leds; + struct rb750_led_data *leds; +}; + +int rb750_latch_change(u32 mask_clr, u32 mask_set); +void rb750_nand_pins_enable(void); +void rb750_nand_pins_disable(void); + +#endif /* _MACH_RB750_H */
\ No newline at end of file diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h new file mode 100644 index 0000000000..5b17e94b64 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h @@ -0,0 +1,48 @@ +/* + * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This file was based on the patches for Linux 2.6.27.39 published by + * MikroTik for their RouterBoard 4xx series devices. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#define CPLD_GPIO_nLED1 0 +#define CPLD_GPIO_nLED2 1 +#define CPLD_GPIO_nLED3 2 +#define CPLD_GPIO_nLED4 3 +#define CPLD_GPIO_FAN 4 +#define CPLD_GPIO_ALE 5 +#define CPLD_GPIO_CLE 6 +#define CPLD_GPIO_nCE 7 +#define CPLD_GPIO_nLED5 8 + +#define CPLD_NUM_GPIOS 9 + +#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1) +#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2) +#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3) +#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4) +#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN) +#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE) +#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE) +#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE) +#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5) + +struct rb4xx_cpld_platform_data { + unsigned gpio_base; +}; + +extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value); +extern int rb4xx_cpld_read(unsigned char *rx_buf, + const unsigned char *verify_buf, + unsigned cnt); +extern int rb4xx_cpld_read_from(unsigned addr, + unsigned char *rx_buf, + const unsigned char *verify_buf, + unsigned cnt); +extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count); diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/Kconfig b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/Kconfig new file mode 100644 index 0000000000..42d544f731 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/Kconfig @@ -0,0 +1,33 @@ +config AG71XX + tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support" + depends on ATH79 + select PHYLIB + help + If you wish to compile a kernel for AR7XXX/91XXX and enable + ethernet support, then you should always answer Y to this. + +if AG71XX + +config AG71XX_DEBUG + bool "Atheros AR71xx built-in ethernet driver debugging" + default n + help + Atheros AR71xx built-in ethernet driver debugging messages. + +config AG71XX_DEBUG_FS + bool "Atheros AR71xx built-in ethernet driver debugfs support" + depends on DEBUG_FS + default n + help + Say Y, if you need access to various statistics provided by + the ag71xx driver. + +config AG71XX_AR8216_SUPPORT + bool "special support for the Atheros AR8216 switch" + default n + default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU + help + Say 'y' here if you want to enable special support for the + Atheros AR8216 switch found on some boards. + +endif diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/Makefile b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/Makefile new file mode 100644 index 0000000000..b3ec4084c8 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the Atheros AR71xx built-in ethernet macs +# + +ag71xx-y += ag71xx_main.o +ag71xx-y += ag71xx_ethtool.o +ag71xx-y += ag71xx_phy.o +ag71xx-y += ag71xx_mdio.o +ag71xx-y += ag71xx_ar7240.o + +ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o +ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o + +obj-$(CONFIG_AG71XX) += ag71xx.o + diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx.h b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx.h new file mode 100644 index 0000000000..d1f692c388 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx.h @@ -0,0 +1,466 @@ +/* + * Atheros AR71xx built-in ethernet mac driver + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Based on Atheros' AG7100 driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __AG71XX_H +#define __AG71XX_H + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/random.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/phy.h> +#include <linux/skbuff.h> +#include <linux/dma-mapping.h> +#include <linux/workqueue.h> + +#include <linux/bitops.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ag71xx_platform.h> + +#define AG71XX_DRV_NAME "ag71xx" +#define AG71XX_DRV_VERSION "0.5.35" + +#define AG71XX_NAPI_WEIGHT 64 +#define AG71XX_OOM_REFILL (1 + HZ/10) + +#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) +#define AG71XX_INT_TX (AG71XX_INT_TX_PS) +#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) + +#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) +#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) + +#define AG71XX_TX_MTU_LEN 1540 +#define AG71XX_RX_PKT_RESERVE 64 +#define AG71XX_RX_PKT_SIZE \ + (AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) + +#define AG71XX_TX_RING_SIZE_DEFAULT 64 +#define AG71XX_RX_RING_SIZE_DEFAULT 128 + +#define AG71XX_TX_RING_SIZE_MAX 256 +#define AG71XX_RX_RING_SIZE_MAX 256 + +#ifdef CONFIG_AG71XX_DEBUG +#define DBG(fmt, args...) pr_debug(fmt, ## args) +#else +#define DBG(fmt, args...) do {} while (0) +#endif + +#define ag71xx_assert(_cond) \ +do { \ + if (_cond) \ + break; \ + printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ + BUG(); \ +} while (0) + +struct ag71xx_desc { + u32 data; + u32 ctrl; +#define DESC_EMPTY BIT(31) +#define DESC_MORE BIT(24) +#define DESC_PKTLEN_M 0xfff + u32 next; + u32 pad; +} __attribute__((aligned(4))); + +struct ag71xx_buf { + struct sk_buff *skb; + struct ag71xx_desc *desc; + dma_addr_t dma_addr; + unsigned long timestamp; +}; + +struct ag71xx_ring { + struct ag71xx_buf *buf; + u8 *descs_cpu; + dma_addr_t descs_dma; + unsigned int desc_size; + unsigned int curr; + unsigned int dirty; + unsigned int size; +}; + +struct ag71xx_mdio { + struct mii_bus *mii_bus; + int mii_irq[PHY_MAX_ADDR]; + void __iomem *mdio_base; + struct ag71xx_mdio_platform_data *pdata; +}; + +struct ag71xx_int_stats { + unsigned long rx_pr; + unsigned long rx_be; + unsigned long rx_of; + unsigned long tx_ps; + unsigned long tx_be; + unsigned long tx_ur; + unsigned long total; +}; + +struct ag71xx_napi_stats { + unsigned long napi_calls; + unsigned long rx_count; + unsigned long rx_packets; + unsigned long rx_packets_max; + unsigned long tx_count; + unsigned long tx_packets; + unsigned long tx_packets_max; + + unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; + unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; +}; + +struct ag71xx_debug { + struct dentry *debugfs_dir; + + struct ag71xx_int_stats int_stats; + struct ag71xx_napi_stats napi_stats; +}; + +struct ag71xx { + void __iomem *mac_base; + + spinlock_t lock; + struct platform_device *pdev; + struct net_device *dev; + struct napi_struct napi; + u32 msg_enable; + + struct ag71xx_desc *stop_desc; + dma_addr_t stop_desc_dma; + + struct ag71xx_ring rx_ring; + struct ag71xx_ring tx_ring; + + struct mii_bus *mii_bus; + struct phy_device *phy_dev; + void *phy_priv; + + unsigned int link; + unsigned int speed; + int duplex; + + struct work_struct restart_work; + struct delayed_work link_work; + struct timer_list oom_timer; + +#ifdef CONFIG_AG71XX_DEBUG_FS + struct ag71xx_debug debug; +#endif +}; + +extern struct ethtool_ops ag71xx_ethtool_ops; +void ag71xx_link_adjust(struct ag71xx *ag); + +int ag71xx_mdio_driver_init(void) __init; +void ag71xx_mdio_driver_exit(void); + +int ag71xx_phy_connect(struct ag71xx *ag); +void ag71xx_phy_disconnect(struct ag71xx *ag); +void ag71xx_phy_start(struct ag71xx *ag); +void ag71xx_phy_stop(struct ag71xx *ag); + +static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag) +{ + return ag->pdev->dev.platform_data; +} + +static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) +{ + return (desc->ctrl & DESC_EMPTY) != 0; +} + +static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc) +{ + return desc->ctrl & DESC_PKTLEN_M; +} + +/* Register offsets */ +#define AG71XX_REG_MAC_CFG1 0x0000 +#define AG71XX_REG_MAC_CFG2 0x0004 +#define AG71XX_REG_MAC_IPG 0x0008 +#define AG71XX_REG_MAC_HDX 0x000c +#define AG71XX_REG_MAC_MFL 0x0010 +#define AG71XX_REG_MII_CFG 0x0020 +#define AG71XX_REG_MII_CMD 0x0024 +#define AG71XX_REG_MII_ADDR 0x0028 +#define AG71XX_REG_MII_CTRL 0x002c +#define AG71XX_REG_MII_STATUS 0x0030 +#define AG71XX_REG_MII_IND 0x0034 +#define AG71XX_REG_MAC_IFCTL 0x0038 +#define AG71XX_REG_MAC_ADDR1 0x0040 +#define AG71XX_REG_MAC_ADDR2 0x0044 +#define AG71XX_REG_FIFO_CFG0 0x0048 +#define AG71XX_REG_FIFO_CFG1 0x004c +#define AG71XX_REG_FIFO_CFG2 0x0050 +#define AG71XX_REG_FIFO_CFG3 0x0054 +#define AG71XX_REG_FIFO_CFG4 0x0058 +#define AG71XX_REG_FIFO_CFG5 0x005c +#define AG71XX_REG_FIFO_RAM0 0x0060 +#define AG71XX_REG_FIFO_RAM1 0x0064 +#define AG71XX_REG_FIFO_RAM2 0x0068 +#define AG71XX_REG_FIFO_RAM3 0x006c +#define AG71XX_REG_FIFO_RAM4 0x0070 +#define AG71XX_REG_FIFO_RAM5 0x0074 +#define AG71XX_REG_FIFO_RAM6 0x0078 +#define AG71XX_REG_FIFO_RAM7 0x007c + +#define AG71XX_REG_TX_CTRL 0x0180 +#define AG71XX_REG_TX_DESC 0x0184 +#define AG71XX_REG_TX_STATUS 0x0188 +#define AG71XX_REG_RX_CTRL 0x018c +#define AG71XX_REG_RX_DESC 0x0190 +#define AG71XX_REG_RX_STATUS 0x0194 +#define AG71XX_REG_INT_ENABLE 0x0198 +#define AG71XX_REG_INT_STATUS 0x019c + +#define AG71XX_REG_FIFO_DEPTH 0x01a8 +#define AG71XX_REG_RX_SM 0x01b0 +#define AG71XX_REG_TX_SM 0x01b4 + +#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ +#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ +#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ +#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ +#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ +#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ +#define MAC_CFG1_LB BIT(8) /* Loopback mode */ +#define MAC_CFG1_SR BIT(31) /* Soft Reset */ + +#define MAC_CFG2_FDX BIT(0) +#define MAC_CFG2_CRC_EN BIT(1) +#define MAC_CFG2_PAD_CRC_EN BIT(2) +#define MAC_CFG2_LEN_CHECK BIT(4) +#define MAC_CFG2_HUGE_FRAME_EN BIT(5) +#define MAC_CFG2_IF_1000 BIT(9) +#define MAC_CFG2_IF_10_100 BIT(8) + +#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ +#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ +#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ +#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ +#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ +#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ + | FIFO_CFG0_TXS | FIFO_CFG0_TXF) + +#define FIFO_CFG0_ENABLE_SHIFT 8 + +#define FIFO_CFG4_DE BIT(0) /* Drop Event */ +#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ +#define FIFO_CFG4_FC BIT(2) /* False Carrier */ +#define FIFO_CFG4_CE BIT(3) /* Code Error */ +#define FIFO_CFG4_CR BIT(4) /* CRC error */ +#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ +#define FIFO_CFG4_LO BIT(6) /* Length out of range */ +#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ +#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ +#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ +#define FIFO_CFG4_DR BIT(10) /* Dribble */ +#define FIFO_CFG4_LE BIT(11) /* Long Event */ +#define FIFO_CFG4_CF BIT(12) /* Control Frame */ +#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ +#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ +#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ +#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ +#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ + +#define FIFO_CFG5_DE BIT(0) /* Drop Event */ +#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ +#define FIFO_CFG5_FC BIT(2) /* False Carrier */ +#define FIFO_CFG5_CE BIT(3) /* Code Error */ +#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ +#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ +#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ +#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ +#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ +#define FIFO_CFG5_DR BIT(9) /* Dribble */ +#define FIFO_CFG5_CF BIT(10) /* Control Frame */ +#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ +#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ +#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ +#define FIFO_CFG5_LE BIT(14) /* Long Event */ +#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ +#define FIFO_CFG5_16 BIT(16) /* unknown */ +#define FIFO_CFG5_17 BIT(17) /* unknown */ +#define FIFO_CFG5_SF BIT(18) /* Short Frame */ +#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ + +#define AG71XX_INT_TX_PS BIT(0) +#define AG71XX_INT_TX_UR BIT(1) +#define AG71XX_INT_TX_BE BIT(3) +#define AG71XX_INT_RX_PR BIT(4) +#define AG71XX_INT_RX_OF BIT(6) +#define AG71XX_INT_RX_BE BIT(7) + +#define MAC_IFCTL_SPEED BIT(16) + +#define MII_CFG_CLK_DIV_4 0 +#define MII_CFG_CLK_DIV_6 2 +#define MII_CFG_CLK_DIV_8 3 +#define MII_CFG_CLK_DIV_10 4 +#define MII_CFG_CLK_DIV_14 5 +#define MII_CFG_CLK_DIV_20 6 +#define MII_CFG_CLK_DIV_28 7 +#define MII_CFG_RESET BIT(31) + +#define MII_CMD_WRITE 0x0 +#define MII_CMD_READ 0x1 +#define MII_ADDR_SHIFT 8 +#define MII_IND_BUSY BIT(0) +#define MII_IND_INVALID BIT(2) + +#define TX_CTRL_TXE BIT(0) /* Tx Enable */ + +#define TX_STATUS_PS BIT(0) /* Packet Sent */ +#define TX_STATUS_UR BIT(1) /* Tx Underrun */ +#define TX_STATUS_BE BIT(3) /* Bus Error */ + +#define RX_CTRL_RXE BIT(0) /* Rx Enable */ + +#define RX_STATUS_PR BIT(0) /* Packet Received */ +#define RX_STATUS_OF BIT(2) /* Rx Overflow */ +#define RX_STATUS_BE BIT(3) /* Bus Error */ + +static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg) +{ + switch (reg) { + case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL: + case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM: + case AG71XX_REG_MII_CFG: + break; + + default: + BUG(); + } +} + +static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) +{ + ag71xx_check_reg_offset(ag, reg); + + __raw_writel(value, ag->mac_base + reg); + /* flush write */ + (void) __raw_readl(ag->mac_base + reg); +} + +static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) +{ + ag71xx_check_reg_offset(ag, reg); + + return __raw_readl(ag->mac_base + reg); +} + +static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) +{ + void __iomem *r; + + ag71xx_check_reg_offset(ag, reg); + + r = ag->mac_base + reg; + __raw_writel(__raw_readl(r) | mask, r); + /* flush write */ + (void)__raw_readl(r); +} + +static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) +{ + void __iomem *r; + + ag71xx_check_reg_offset(ag, reg); + + r = ag->mac_base + reg; + __raw_writel(__raw_readl(r) & ~mask, r); + /* flush write */ + (void) __raw_readl(r); +} + +static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) +{ + ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); +} + +static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) +{ + ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); +} + +#ifdef CONFIG_AG71XX_AR8216_SUPPORT +void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb); +int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, + int pktlen); +static inline int ag71xx_has_ar8216(struct ag71xx *ag) +{ + return ag71xx_get_pdata(ag)->has_ar8216; +} +#else +static inline void ag71xx_add_ar8216_header(struct ag71xx *ag, + struct sk_buff *skb) +{ +} + +static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag, + struct sk_buff *skb, + int pktlen) +{ + return 0; +} +static inline int ag71xx_has_ar8216(struct ag71xx *ag) +{ + return 0; +} +#endif + +#ifdef CONFIG_AG71XX_DEBUG_FS +int ag71xx_debugfs_root_init(void); +void ag71xx_debugfs_root_exit(void); +int ag71xx_debugfs_init(struct ag71xx *ag); +void ag71xx_debugfs_exit(struct ag71xx *ag); +void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); +void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); +#else +static inline int ag71xx_debugfs_root_init(void) { return 0; } +static inline void ag71xx_debugfs_root_exit(void) {} +static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } +static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} +static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, + u32 status) {} +static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, + int rx, int tx) {} +#endif /* CONFIG_AG71XX_DEBUG_FS */ + +void ag71xx_ar7240_start(struct ag71xx *ag); +void ag71xx_ar7240_stop(struct ag71xx *ag); +int ag71xx_ar7240_init(struct ag71xx *ag); +void ag71xx_ar7240_cleanup(struct ag71xx *ag); + +int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg); +void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val); + +u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, + unsigned reg_addr); +int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, + unsigned reg_addr, u16 reg_val); + +#endif /* _AG71XX_H */ diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c new file mode 100644 index 0000000000..ab7abd9e5c --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c @@ -0,0 +1,1194 @@ +/* + * Driver for the built-in ethernet switch of the Atheros AR7240 SoC + * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2010 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/etherdevice.h> +#include <linux/list.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <linux/mii.h> +#include <linux/bitops.h> +#include <linux/switch.h> +#include "ag71xx.h" + +#define BITM(_count) (BIT(_count) - 1) +#define BITS(_shift, _count) (BITM(_count) << _shift) + +#define AR7240_REG_MASK_CTRL 0x00 +#define AR7240_MASK_CTRL_REVISION_M BITM(8) +#define AR7240_MASK_CTRL_VERSION_M BITM(8) +#define AR7240_MASK_CTRL_VERSION_S 8 +#define AR7240_MASK_CTRL_VERSION_AR7240 0x01 +#define AR7240_MASK_CTRL_VERSION_AR934X 0x02 +#define AR7240_MASK_CTRL_SOFT_RESET BIT(31) + +#define AR7240_REG_MAC_ADDR0 0x20 +#define AR7240_REG_MAC_ADDR1 0x24 + +#define AR7240_REG_FLOOD_MASK 0x2c +#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26) + +#define AR7240_REG_GLOBAL_CTRL 0x30 +#define AR7240_GLOBAL_CTRL_MTU_M BITM(12) + +#define AR7240_REG_VTU 0x0040 +#define AR7240_VTU_OP BITM(3) +#define AR7240_VTU_OP_NOOP 0x0 +#define AR7240_VTU_OP_FLUSH 0x1 +#define AR7240_VTU_OP_LOAD 0x2 +#define AR7240_VTU_OP_PURGE 0x3 +#define AR7240_VTU_OP_REMOVE_PORT 0x4 +#define AR7240_VTU_ACTIVE BIT(3) +#define AR7240_VTU_FULL BIT(4) +#define AR7240_VTU_PORT BITS(8, 4) +#define AR7240_VTU_PORT_S 8 +#define AR7240_VTU_VID BITS(16, 12) +#define AR7240_VTU_VID_S 16 +#define AR7240_VTU_PRIO BITS(28, 3) +#define AR7240_VTU_PRIO_S 28 +#define AR7240_VTU_PRIO_EN BIT(31) + +#define AR7240_REG_VTU_DATA 0x0044 +#define AR7240_VTUDATA_MEMBER BITS(0, 10) +#define AR7240_VTUDATA_VALID BIT(11) + +#define AR7240_REG_ATU 0x50 +#define AR7240_ATU_FLUSH_ALL 0x1 + +#define AR7240_REG_AT_CTRL 0x5c +#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15) +#define AR7240_AT_CTRL_AGE_EN BIT(17) +#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18) +#define AR7240_AT_CTRL_RESERVED BIT(19) +#define AR7240_AT_CTRL_ARP_EN BIT(20) + +#define AR7240_REG_TAG_PRIORITY 0x70 + +#define AR7240_REG_SERVICE_TAG 0x74 +#define AR7240_SERVICE_TAG_M BITM(16) + +#define AR7240_REG_CPU_PORT 0x78 +#define AR7240_MIRROR_PORT_S 4 +#define AR7240_CPU_PORT_EN BIT(8) + +#define AR7240_REG_MIB_FUNCTION0 0x80 +#define AR7240_MIB_TIMER_M BITM(16) +#define AR7240_MIB_AT_HALF_EN BIT(16) +#define AR7240_MIB_BUSY BIT(17) +#define AR7240_MIB_FUNC_S 24 +#define AR7240_MIB_FUNC_NO_OP 0x0 +#define AR7240_MIB_FUNC_FLUSH 0x1 +#define AR7240_MIB_FUNC_CAPTURE 0x3 + +#define AR7240_REG_MDIO_CTRL 0x98 +#define AR7240_MDIO_CTRL_DATA_M BITM(16) +#define AR7240_MDIO_CTRL_REG_ADDR_S 16 +#define AR7240_MDIO_CTRL_PHY_ADDR_S 21 +#define AR7240_MDIO_CTRL_CMD_WRITE 0 +#define AR7240_MDIO_CTRL_CMD_READ BIT(27) +#define AR7240_MDIO_CTRL_MASTER_EN BIT(30) +#define AR7240_MDIO_CTRL_BUSY BIT(31) + +#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) + +#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00) +#define AR7240_PORT_STATUS_SPEED_S 0 +#define AR7240_PORT_STATUS_SPEED_M BITM(2) +#define AR7240_PORT_STATUS_SPEED_10 0 +#define AR7240_PORT_STATUS_SPEED_100 1 +#define AR7240_PORT_STATUS_SPEED_1000 2 +#define AR7240_PORT_STATUS_TXMAC BIT(2) +#define AR7240_PORT_STATUS_RXMAC BIT(3) +#define AR7240_PORT_STATUS_TXFLOW BIT(4) +#define AR7240_PORT_STATUS_RXFLOW BIT(5) +#define AR7240_PORT_STATUS_DUPLEX BIT(6) +#define AR7240_PORT_STATUS_LINK_UP BIT(8) +#define AR7240_PORT_STATUS_LINK_AUTO BIT(9) +#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10) + +#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04) +#define AR7240_PORT_CTRL_STATE_M BITM(3) +#define AR7240_PORT_CTRL_STATE_DISABLED 0 +#define AR7240_PORT_CTRL_STATE_BLOCK 1 +#define AR7240_PORT_CTRL_STATE_LISTEN 2 +#define AR7240_PORT_CTRL_STATE_LEARN 3 +#define AR7240_PORT_CTRL_STATE_FORWARD 4 +#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7) +#define AR7240_PORT_CTRL_VLAN_MODE_S 8 +#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0 +#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1 +#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2 +#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3 +#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10) +#define AR7240_PORT_CTRL_HEADER BIT(11) +#define AR7240_PORT_CTRL_MAC_LOOP BIT(12) +#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13) +#define AR7240_PORT_CTRL_LEARN BIT(14) +#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15) +#define AR7240_PORT_CTRL_MIRROR_TX BIT(16) +#define AR7240_PORT_CTRL_MIRROR_RX BIT(17) + +#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08) + +#define AR7240_PORT_VLAN_DEFAULT_ID_S 0 +#define AR7240_PORT_VLAN_DEST_PORTS_S 16 +#define AR7240_PORT_VLAN_MODE_S 30 +#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0 +#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1 +#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2 +#define AR7240_PORT_VLAN_MODE_SECURE 3 + + +#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100) + +#define AR7240_STATS_RXBROAD 0x00 +#define AR7240_STATS_RXPAUSE 0x04 +#define AR7240_STATS_RXMULTI 0x08 +#define AR7240_STATS_RXFCSERR 0x0c +#define AR7240_STATS_RXALIGNERR 0x10 +#define AR7240_STATS_RXRUNT 0x14 +#define AR7240_STATS_RXFRAGMENT 0x18 +#define AR7240_STATS_RX64BYTE 0x1c +#define AR7240_STATS_RX128BYTE 0x20 +#define AR7240_STATS_RX256BYTE 0x24 +#define AR7240_STATS_RX512BYTE 0x28 +#define AR7240_STATS_RX1024BYTE 0x2c +#define AR7240_STATS_RX1518BYTE 0x30 +#define AR7240_STATS_RXMAXBYTE 0x34 +#define AR7240_STATS_RXTOOLONG 0x38 +#define AR7240_STATS_RXGOODBYTE 0x3c +#define AR7240_STATS_RXBADBYTE 0x44 +#define AR7240_STATS_RXOVERFLOW 0x4c +#define AR7240_STATS_FILTERED 0x50 +#define AR7240_STATS_TXBROAD 0x54 +#define AR7240_STATS_TXPAUSE 0x58 +#define AR7240_STATS_TXMULTI 0x5c +#define AR7240_STATS_TXUNDERRUN 0x60 +#define AR7240_STATS_TX64BYTE 0x64 +#define AR7240_STATS_TX128BYTE 0x68 +#define AR7240_STATS_TX256BYTE 0x6c +#define AR7240_STATS_TX512BYTE 0x70 +#define AR7240_STATS_TX1024BYTE 0x74 +#define AR7240_STATS_TX1518BYTE 0x78 +#define AR7240_STATS_TXMAXBYTE 0x7c +#define AR7240_STATS_TXOVERSIZE 0x80 +#define AR7240_STATS_TXBYTE 0x84 +#define AR7240_STATS_TXCOLLISION 0x8c +#define AR7240_STATS_TXABORTCOL 0x90 +#define AR7240_STATS_TXMULTICOL 0x94 +#define AR7240_STATS_TXSINGLECOL 0x98 +#define AR7240_STATS_TXEXCDEFER 0x9c +#define AR7240_STATS_TXDEFER 0xa0 +#define AR7240_STATS_TXLATECOL 0xa4 + +#define AR7240_PORT_CPU 0 +#define AR7240_NUM_PORTS 6 +#define AR7240_NUM_PHYS 5 + +#define AR7240_PHY_ID1 0x004d +#define AR7240_PHY_ID2 0xd041 + +#define AR934X_PHY_ID1 0x004d +#define AR934X_PHY_ID2 0xd042 + +#define AR7240_MAX_VLANS 16 + +#define AR934X_REG_OPER_MODE0 0x04 +#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6) +#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10) + +#define AR934X_REG_OPER_MODE1 0x08 +#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28) + +#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) + +#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08) +#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0 +#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12) +#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13) +#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14) +#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15) +#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16 +#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28) +#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29 + +#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c) +#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16 +#define AR934X_PORT_VLAN2_8021Q_MODE_S 30 +#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0 +#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1 +#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2 +#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3 + +#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev) + +struct ar7240sw_port_stat { + unsigned long rx_broadcast; + unsigned long rx_pause; + unsigned long rx_multicast; + unsigned long rx_fcs_error; + unsigned long rx_align_error; + unsigned long rx_runt; + unsigned long rx_fragments; + unsigned long rx_64byte; + unsigned long rx_128byte; + unsigned long rx_256byte; + unsigned long rx_512byte; + unsigned long rx_1024byte; + unsigned long rx_1518byte; + unsigned long rx_maxbyte; + unsigned long rx_toolong; + unsigned long rx_good_byte; + unsigned long rx_bad_byte; + unsigned long rx_overflow; + unsigned long filtered; + + unsigned long tx_broadcast; + unsigned long tx_pause; + unsigned long tx_multicast; + unsigned long tx_underrun; + unsigned long tx_64byte; + unsigned long tx_128byte; + unsigned long tx_256byte; + unsigned long tx_512byte; + unsigned long tx_1024byte; + unsigned long tx_1518byte; + unsigned long tx_maxbyte; + unsigned long tx_oversize; + unsigned long tx_byte; + unsigned long tx_collision; + unsigned long tx_abortcol; + unsigned long tx_multicol; + unsigned long tx_singlecol; + unsigned long tx_excdefer; + unsigned long tx_defer; + unsigned long tx_xlatecol; +}; + +struct ar7240sw { + struct mii_bus *mii_bus; + struct ag71xx_switch_platform_data *swdata; + struct switch_dev swdev; + int num_ports; + u8 ver; + bool vlan; + u16 vlan_id[AR7240_MAX_VLANS]; + u8 vlan_table[AR7240_MAX_VLANS]; + u8 vlan_tagged; + u16 pvid[AR7240_NUM_PORTS]; + char buf[80]; + + rwlock_t stats_lock; + struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS]; +}; + +struct ar7240sw_hw_stat { + char string[ETH_GSTRING_LEN]; + int sizeof_stat; + int reg; +}; + +static DEFINE_MUTEX(reg_mutex); + +static inline int sw_is_ar7240(struct ar7240sw *as) +{ + return as->ver == AR7240_MASK_CTRL_VERSION_AR7240; +} + +static inline int sw_is_ar934x(struct ar7240sw *as) +{ + return as->ver == AR7240_MASK_CTRL_VERSION_AR934X; +} + +static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port) +{ + return BIT(port); +} + +static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as) +{ + return BIT(as->swdev.ports) - 1; +} + +static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port) +{ + return ar7240sw_port_mask_all(as) & ~BIT(port); +} + +static inline u16 mk_phy_addr(u32 reg) +{ + return 0x17 & ((reg >> 4) | 0x10); +} + +static inline u16 mk_phy_reg(u32 reg) +{ + return (reg << 1) & 0x1e; +} + +static inline u16 mk_high_addr(u32 reg) +{ + return (reg >> 7) & 0x1ff; +} + +static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg) +{ + unsigned long flags; + u16 phy_addr; + u16 phy_reg; + u32 hi, lo; + + reg = (reg & 0xfffffffc) >> 2; + phy_addr = mk_phy_addr(reg); + phy_reg = mk_phy_reg(reg); + + local_irq_save(flags); + ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); + lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg); + hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1); + local_irq_restore(flags); + + return (hi << 16) | lo; +} + +static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val) +{ + unsigned long flags; + u16 phy_addr; + u16 phy_reg; + + reg = (reg & 0xfffffffc) >> 2; + phy_addr = mk_phy_addr(reg); + phy_reg = mk_phy_reg(reg); + + local_irq_save(flags); + ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); + ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16)); + ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff)); + local_irq_restore(flags); +} + +static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr) +{ + u32 ret; + + mutex_lock(®_mutex); + ret = __ar7240sw_reg_read(mii, reg_addr); + mutex_unlock(®_mutex); + + return ret; +} + +static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val) +{ + mutex_lock(®_mutex); + __ar7240sw_reg_write(mii, reg_addr, reg_val); + mutex_unlock(®_mutex); +} + +static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val) +{ + u32 t; + + mutex_lock(®_mutex); + t = __ar7240sw_reg_read(mii, reg); + t &= ~mask; + t |= val; + __ar7240sw_reg_write(mii, reg, t); + mutex_unlock(®_mutex); + + return t; +} + +static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val) +{ + u32 t; + + mutex_lock(®_mutex); + t = __ar7240sw_reg_read(mii, reg); + t |= val; + __ar7240sw_reg_write(mii, reg, t); + mutex_unlock(®_mutex); +} + +static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, + unsigned timeout) +{ + int i; + + for (i = 0; i < timeout; i++) { + u32 t; + + t = __ar7240sw_reg_read(mii, reg); + if ((t & mask) == val) + return 0; + + msleep(1); + } + + return -ETIMEDOUT; +} + +static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, + unsigned timeout) +{ + int ret; + + mutex_lock(®_mutex); + ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout); + mutex_unlock(®_mutex); + return ret; +} + +u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, + unsigned reg_addr) +{ + u32 t, val = 0xffff; + int err; + + if (phy_addr >= AR7240_NUM_PHYS) + return 0xffff; + + mutex_lock(®_mutex); + t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | + (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | + AR7240_MDIO_CTRL_MASTER_EN | + AR7240_MDIO_CTRL_BUSY | + AR7240_MDIO_CTRL_CMD_READ; + + __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); + err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, + AR7240_MDIO_CTRL_BUSY, 0, 5); + if (!err) + val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL); + mutex_unlock(®_mutex); + + return val & AR7240_MDIO_CTRL_DATA_M; +} + +int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, + unsigned reg_addr, u16 reg_val) +{ + u32 t; + int ret; + + if (phy_addr >= AR7240_NUM_PHYS) + return -EINVAL; + + mutex_lock(®_mutex); + t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | + (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | + AR7240_MDIO_CTRL_MASTER_EN | + AR7240_MDIO_CTRL_BUSY | + AR7240_MDIO_CTRL_CMD_WRITE | + reg_val; + + __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); + ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, + AR7240_MDIO_CTRL_BUSY, 0, 5); + mutex_unlock(®_mutex); + + return ret; +} + +static int ar7240sw_capture_stats(struct ar7240sw *as) +{ + struct mii_bus *mii = as->mii_bus; + int port; + int ret; + + write_lock(&as->stats_lock); + + /* Capture the hardware statistics for all ports */ + ar7240sw_reg_write(mii, AR7240_REG_MIB_FUNCTION0, + (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S)); + + /* Wait for the capturing to complete. */ + ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0, + AR7240_MIB_BUSY, 0, 10); + + if (ret) + goto unlock; + + for (port = 0; port < AR7240_NUM_PORTS; port++) { + unsigned int base; + struct ar7240sw_port_stat *stats; + + base = AR7240_REG_STATS_BASE(port); + stats = &as->port_stats[port]; + +#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r) + + stats->rx_good_byte += READ_STAT(RXGOODBYTE); + stats->tx_byte += READ_STAT(TXBYTE); + +#undef READ_STAT + } + + ret = 0; + +unlock: + write_unlock(&as->stats_lock); + return ret; +} + +static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port) +{ + ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port), + AR7240_PORT_CTRL_STATE_DISABLED); +} + +static void ar7240sw_setup(struct ar7240sw *as) +{ + struct mii_bus *mii = as->mii_bus; + + /* Enable CPU port, and disable mirror port */ + ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT, + AR7240_CPU_PORT_EN | + (15 << AR7240_MIRROR_PORT_S)); + + /* Setup TAG priority mapping */ + ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50); + + /* Enable ARP frame acknowledge, aging, MAC replacing */ + ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL, + AR7240_AT_CTRL_RESERVED | + 0x2b /* 5 min age time */ | + AR7240_AT_CTRL_AGE_EN | + AR7240_AT_CTRL_ARP_EN | + AR7240_AT_CTRL_LEARN_CHANGE); + + /* Enable Broadcast frames transmitted to the CPU */ + ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK, + AR7240_FLOOD_MASK_BROAD_TO_CPU); + + /* setup MTU */ + ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, AR7240_GLOBAL_CTRL_MTU_M, + 1536); + + /* setup Service TAG */ + ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0); +} + +static int ar7240sw_reset(struct ar7240sw *as) +{ + struct mii_bus *mii = as->mii_bus; + int ret; + int i; + + /* Set all ports to disabled state. */ + for (i = 0; i < AR7240_NUM_PORTS; i++) + ar7240sw_disable_port(as, i); + + /* Wait for transmit queues to drain. */ + msleep(2); + + /* Reset the switch. */ + ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL, + AR7240_MASK_CTRL_SOFT_RESET); + + ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL, + AR7240_MASK_CTRL_SOFT_RESET, 0, 1000); + + ar7240sw_setup(as); + return ret; +} + +static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask) +{ + struct mii_bus *mii = as->mii_bus; + u32 ctrl; + u32 vid, mode; + + ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN | + AR7240_PORT_CTRL_SINGLE_VLAN; + + if (port == AR7240_PORT_CPU) { + ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), + AR7240_PORT_STATUS_SPEED_1000 | + AR7240_PORT_STATUS_TXFLOW | + AR7240_PORT_STATUS_RXFLOW | + AR7240_PORT_STATUS_TXMAC | + AR7240_PORT_STATUS_RXMAC | + AR7240_PORT_STATUS_DUPLEX); + } else { + ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), + AR7240_PORT_STATUS_LINK_AUTO); + } + + /* Set the default VID for this port */ + if (as->vlan) { + vid = as->vlan_id[as->pvid[port]]; + mode = AR7240_PORT_VLAN_MODE_SECURE; + } else { + vid = port; + mode = AR7240_PORT_VLAN_MODE_PORT_ONLY; + } + + if (as->vlan && (as->vlan_tagged & BIT(port))) { + ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD << + AR7240_PORT_CTRL_VLAN_MODE_S; + } else { + ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP << + AR7240_PORT_CTRL_VLAN_MODE_S; + } + + if (!portmask) { + if (port == AR7240_PORT_CPU) + portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU); + else + portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU); + } + + /* allow the port to talk to all other ports, but exclude its + * own ID to prevent frames from being reflected back to the + * port that they came from */ + portmask &= ar7240sw_port_mask_but(as, port); + + ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl); + if (sw_is_ar934x(as)) { + u32 vlan1, vlan2; + + vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S); + vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) | + (mode << AR934X_PORT_VLAN2_8021Q_MODE_S); + ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1); + ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2); + } else { + u32 vlan; + + vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) | + (portmask << AR7240_PORT_VLAN_DEST_PORTS_S); + + ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan); + } +} + +static int ar7240_set_addr(struct ar7240sw *as, u8 *addr) +{ + struct mii_bus *mii = as->mii_bus; + u32 t; + + t = (addr[4] << 8) | addr[5]; + ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t); + + t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; + ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t); + + return 0; +} + +static int +ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + as->vlan_id[val->port_vlan] = val->value.i; + return 0; +} + +static int +ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + val->value.i = as->vlan_id[val->port_vlan]; + return 0; +} + +static int +ar7240_set_pvid(struct switch_dev *dev, int port, int vlan) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + + /* make sure no invalid PVIDs get set */ + + if (vlan >= dev->vlans) + return -EINVAL; + + as->pvid[port] = vlan; + return 0; +} + +static int +ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + *vlan = as->pvid[port]; + return 0; +} + +static int +ar7240_get_ports(struct switch_dev *dev, struct switch_val *val) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + u8 ports = as->vlan_table[val->port_vlan]; + int i; + + val->len = 0; + for (i = 0; i < as->swdev.ports; i++) { + struct switch_port *p; + + if (!(ports & (1 << i))) + continue; + + p = &val->value.ports[val->len++]; + p->id = i; + if (as->vlan_tagged & (1 << i)) + p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); + else + p->flags = 0; + } + return 0; +} + +static int +ar7240_set_ports(struct switch_dev *dev, struct switch_val *val) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + u8 *vt = &as->vlan_table[val->port_vlan]; + int i, j; + + *vt = 0; + for (i = 0; i < val->len; i++) { + struct switch_port *p = &val->value.ports[i]; + + if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) + as->vlan_tagged |= (1 << p->id); + else { + as->vlan_tagged &= ~(1 << p->id); + as->pvid[p->id] = val->port_vlan; + + /* make sure that an untagged port does not + * appear in other vlans */ + for (j = 0; j < AR7240_MAX_VLANS; j++) { + if (j == val->port_vlan) + continue; + as->vlan_table[j] &= ~(1 << p->id); + } + } + + *vt |= 1 << p->id; + } + return 0; +} + +static int +ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + as->vlan = !!val->value.i; + return 0; +} + +static int +ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + val->value.i = as->vlan; + return 0; +} + +static const char * +ar7240_speed_str(u32 status) +{ + u32 speed; + + speed = (status >> AR7240_PORT_STATUS_SPEED_S) & + AR7240_PORT_STATUS_SPEED_M; + switch (speed) { + case AR7240_PORT_STATUS_SPEED_10: + return "10baseT"; + case AR7240_PORT_STATUS_SPEED_100: + return "100baseT"; + case AR7240_PORT_STATUS_SPEED_1000: + return "1000baseT"; + } + + return "unknown"; +} + +static int +ar7240_port_get_link(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + struct mii_bus *mii = as->mii_bus; + u32 len; + u32 status; + int port; + + port = val->port_vlan; + + memset(as->buf, '\0', sizeof(as->buf)); + status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port)); + + if (status & AR7240_PORT_STATUS_LINK_UP) { + len = snprintf(as->buf, sizeof(as->buf), + "port:%d link:up speed:%s %s-duplex %s%s%s", + port, + ar7240_speed_str(status), + (status & AR7240_PORT_STATUS_DUPLEX) ? + "full" : "half", + (status & AR7240_PORT_STATUS_TXFLOW) ? + "txflow ": "", + (status & AR7240_PORT_STATUS_RXFLOW) ? + "rxflow " : "", + (status & AR7240_PORT_STATUS_LINK_AUTO) ? + "auto ": ""); + } else { + len = snprintf(as->buf, sizeof(as->buf), + "port:%d link:down", port); + } + + val->value.s = as->buf; + val->len = len; + + return 0; +} + +static void +ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val) +{ + struct mii_bus *mii = as->mii_bus; + + if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5)) + return; + + if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) { + val &= AR7240_VTUDATA_MEMBER; + val |= AR7240_VTUDATA_VALID; + ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val); + } + op |= AR7240_VTU_ACTIVE; + ar7240sw_reg_write(mii, AR7240_REG_VTU, op); +} + +static int +ar7240_hw_apply(struct switch_dev *dev) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + u8 portmask[AR7240_NUM_PORTS]; + int i, j; + + /* flush all vlan translation unit entries */ + ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0); + + memset(portmask, 0, sizeof(portmask)); + if (as->vlan) { + /* calculate the port destination masks and load vlans + * into the vlan translation unit */ + for (j = 0; j < AR7240_MAX_VLANS; j++) { + u8 vp = as->vlan_table[j]; + + if (!vp) + continue; + + for (i = 0; i < as->swdev.ports; i++) { + u8 mask = (1 << i); + if (vp & mask) + portmask[i] |= vp & ~mask; + } + + ar7240_vtu_op(as, + AR7240_VTU_OP_LOAD | + (as->vlan_id[j] << AR7240_VTU_VID_S), + as->vlan_table[j]); + } + } else { + /* vlan disabled: + * isolate all ports, but connect them to the cpu port */ + for (i = 0; i < as->swdev.ports; i++) { + if (i == AR7240_PORT_CPU) + continue; + + portmask[i] = 1 << AR7240_PORT_CPU; + portmask[AR7240_PORT_CPU] |= (1 << i); + } + } + + /* update the port destination mask registers and tag settings */ + for (i = 0; i < as->swdev.ports; i++) + ar7240sw_setup_port(as, i, portmask[i]); + + return 0; +} + +static int +ar7240_reset_switch(struct switch_dev *dev) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + ar7240sw_reset(as); + return 0; +} + +static int +ar7240_get_port_link(struct switch_dev *dev, int port, + struct switch_port_link *link) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + struct mii_bus *mii = as->mii_bus; + u32 status; + + if (port > AR7240_NUM_PORTS) + return -EINVAL; + + status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port)); + + link->link = !!(status & AR7240_PORT_STATUS_LINK_UP); + link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO); + link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX); + link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW); + link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW); + switch (status & AR7240_PORT_STATUS_SPEED_M) { + case AR7240_PORT_STATUS_SPEED_10: + link->speed = SWITCH_PORT_SPEED_10; + break; + case AR7240_PORT_STATUS_SPEED_100: + link->speed = SWITCH_PORT_SPEED_100; + break; + case AR7240_PORT_STATUS_SPEED_1000: + link->speed = SWITCH_PORT_SPEED_1000; + break; + } + + return 0; +} + +static int +ar7240_get_port_stats(struct switch_dev *dev, int port, + struct switch_port_stats *stats) +{ + struct ar7240sw *as = sw_to_ar7240(dev); + + if (port > AR7240_NUM_PORTS) + return -EINVAL; + + ar7240sw_capture_stats(as); + + read_lock(&as->stats_lock); + stats->rx_bytes = as->port_stats[port].rx_good_byte; + stats->tx_bytes = as->port_stats[port].tx_byte; + read_unlock(&as->stats_lock); + + return 0; +} + +static struct switch_attr ar7240_globals[] = { + { + .type = SWITCH_TYPE_INT, + .name = "enable_vlan", + .description = "Enable VLAN mode", + .set = ar7240_set_vlan, + .get = ar7240_get_vlan, + .max = 1 + }, +}; + +static struct switch_attr ar7240_port[] = { + { + .type = SWITCH_TYPE_STRING, + .name = "link", + .description = "Get port link information", + .max = 1, + .set = NULL, + .get = ar7240_port_get_link, + }, +}; + +static struct switch_attr ar7240_vlan[] = { + { + .type = SWITCH_TYPE_INT, + .name = "vid", + .description = "VLAN ID", + .set = ar7240_set_vid, + .get = ar7240_get_vid, + .max = 4094, + }, +}; + +static const struct switch_dev_ops ar7240_ops = { + .attr_global = { + .attr = ar7240_globals, + .n_attr = ARRAY_SIZE(ar7240_globals), + }, + .attr_port = { + .attr = ar7240_port, + .n_attr = ARRAY_SIZE(ar7240_port), + }, + .attr_vlan = { + .attr = ar7240_vlan, + .n_attr = ARRAY_SIZE(ar7240_vlan), + }, + .get_port_pvid = ar7240_get_pvid, + .set_port_pvid = ar7240_set_pvid, + .get_vlan_ports = ar7240_get_ports, + .set_vlan_ports = ar7240_set_ports, + .apply_config = ar7240_hw_apply, + .reset_switch = ar7240_reset_switch, + .get_port_link = ar7240_get_port_link, + .get_port_stats = ar7240_get_port_stats, +}; + +static struct ar7240sw *ar7240_probe(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + struct mii_bus *mii = ag->mii_bus; + struct ar7240sw *as; + struct switch_dev *swdev; + u32 ctrl; + u16 phy_id1; + u16 phy_id2; + int i; + + phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1); + phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2); + if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) && + (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) { + pr_err("%s: unknown phy id '%04x:%04x'\n", + ag->dev->name, phy_id1, phy_id2); + return NULL; + } + + as = kzalloc(sizeof(*as), GFP_KERNEL); + if (!as) + return NULL; + + as->mii_bus = mii; + as->swdata = pdata->switch_data; + + swdev = &as->swdev; + + ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL); + as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) & + AR7240_MASK_CTRL_VERSION_M; + + if (sw_is_ar7240(as)) { + swdev->name = "AR7240/AR9330 built-in switch"; + } else if (sw_is_ar934x(as)) { + swdev->name = "AR934X built-in switch"; + + if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) { + ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, + AR934X_OPER_MODE0_MAC_GMII_EN); + } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) { + ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, + AR934X_OPER_MODE0_PHY_MII_EN); + } else { + pr_err("%s: invalid PHY interface mode\n", + ag->dev->name); + goto err_free; + } + + if (as->swdata->phy4_mii_en) + ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1, + AR934X_REG_OPER_MODE1_PHY4_MII_EN); + } else { + pr_err("%s: unsupported chip, ctrl=%08x\n", + ag->dev->name, ctrl); + goto err_free; + } + + swdev->ports = AR7240_NUM_PORTS - 1; + swdev->cpu_port = AR7240_PORT_CPU; + swdev->vlans = AR7240_MAX_VLANS; + swdev->ops = &ar7240_ops; + + if (register_switch(&as->swdev, ag->dev) < 0) + goto err_free; + + pr_info("%s: Found an %s\n", ag->dev->name, swdev->name); + + /* initialize defaults */ + for (i = 0; i < AR7240_MAX_VLANS; i++) + as->vlan_id[i] = i; + + as->vlan_table[0] = ar7240sw_port_mask_all(as); + + return as; + +err_free: + kfree(as); + return NULL; +} + +static void link_function(struct work_struct *work) { + struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work); + unsigned long flags; + int i; + int status = 0; + + for (i = 0; i < 4; i++) { + int link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR); + if(link & BMSR_LSTATUS) { + status = 1; + break; + } + } + + spin_lock_irqsave(&ag->lock, flags); + if(status != ag->link) { + ag->link = status; + ag71xx_link_adjust(ag); + } + spin_unlock_irqrestore(&ag->lock, flags); + + schedule_delayed_work(&ag->link_work, HZ / 2); +} + +void ag71xx_ar7240_start(struct ag71xx *ag) +{ + struct ar7240sw *as = ag->phy_priv; + + ar7240sw_reset(as); + + ag->speed = SPEED_1000; + ag->duplex = 1; + + ar7240_set_addr(as, ag->dev->dev_addr); + ar7240_hw_apply(&as->swdev); + + schedule_delayed_work(&ag->link_work, HZ / 10); +} + +void ag71xx_ar7240_stop(struct ag71xx *ag) +{ + cancel_delayed_work_sync(&ag->link_work); +} + +int __devinit ag71xx_ar7240_init(struct ag71xx *ag) +{ + struct ar7240sw *as; + + as = ar7240_probe(ag); + if (!as) + return -ENODEV; + + ag->phy_priv = as; + ar7240sw_reset(as); + + rwlock_init(&as->stats_lock); + INIT_DELAYED_WORK(&ag->link_work, link_function); + + return 0; +} + +void ag71xx_ar7240_cleanup(struct ag71xx *ag) +{ + struct ar7240sw *as = ag->phy_priv; + + if (!as) + return; + + unregister_switch(&as->swdev); + kfree(as); + ag->phy_priv = NULL; +} diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c new file mode 100644 index 0000000000..7ec43b7221 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c @@ -0,0 +1,44 @@ +/* + * Atheros AR71xx built-in ethernet mac driver + * Special support for the Atheros ar8216 switch chip + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * Based on Atheros' AG7100 driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ag71xx.h" + +#define AR8216_PACKET_TYPE_MASK 0xf +#define AR8216_PACKET_TYPE_NORMAL 0 + +#define AR8216_HEADER_LEN 2 + +void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb) +{ + skb_push(skb, AR8216_HEADER_LEN); + skb->data[0] = 0x10; + skb->data[1] = 0x80; +} + +int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, + int pktlen) +{ + u8 type; + + type = skb->data[1] & AR8216_PACKET_TYPE_MASK; + switch (type) { + case AR8216_PACKET_TYPE_NORMAL: + break; + + default: + return -EINVAL; + } + + skb_pull(skb, AR8216_HEADER_LEN); + return 0; +} diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c new file mode 100644 index 0000000000..65f2be198f --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c @@ -0,0 +1,280 @@ +/* + * Atheros AR71xx built-in ethernet mac driver + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Based on Atheros' AG7100 driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/debugfs.h> + +#include "ag71xx.h" + +static struct dentry *ag71xx_debugfs_root; + +static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status) +{ + if (status) + ag->debug.int_stats.total++; + if (status & AG71XX_INT_TX_PS) + ag->debug.int_stats.tx_ps++; + if (status & AG71XX_INT_TX_UR) + ag->debug.int_stats.tx_ur++; + if (status & AG71XX_INT_TX_BE) + ag->debug.int_stats.tx_be++; + if (status & AG71XX_INT_RX_PR) + ag->debug.int_stats.rx_pr++; + if (status & AG71XX_INT_RX_OF) + ag->debug.int_stats.rx_of++; + if (status & AG71XX_INT_RX_BE) + ag->debug.int_stats.rx_be++; +} + +static ssize_t read_file_int_stats(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ +#define PR_INT_STAT(_label, _field) \ + len += snprintf(buf + len, sizeof(buf) - len, \ + "%20s: %10lu\n", _label, ag->debug.int_stats._field); + + struct ag71xx *ag = file->private_data; + char buf[256]; + unsigned int len = 0; + + PR_INT_STAT("TX Packet Sent", tx_ps); + PR_INT_STAT("TX Underrun", tx_ur); + PR_INT_STAT("TX Bus Error", tx_be); + PR_INT_STAT("RX Packet Received", rx_pr); + PR_INT_STAT("RX Overflow", rx_of); + PR_INT_STAT("RX Bus Error", rx_be); + len += snprintf(buf + len, sizeof(buf) - len, "\n"); + PR_INT_STAT("Total", total); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +#undef PR_INT_STAT +} + +static const struct file_operations ag71xx_fops_int_stats = { + .open = ag71xx_debugfs_generic_open, + .read = read_file_int_stats, + .owner = THIS_MODULE +}; + +void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx) +{ + struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; + + if (rx) { + stats->rx_count++; + stats->rx_packets += rx; + if (rx <= AG71XX_NAPI_WEIGHT) + stats->rx[rx]++; + if (rx > stats->rx_packets_max) + stats->rx_packets_max = rx; + } + + if (tx) { + stats->tx_count++; + stats->tx_packets += tx; + if (tx <= AG71XX_NAPI_WEIGHT) + stats->tx[tx]++; + if (tx > stats->tx_packets_max) + stats->tx_packets_max = tx; + } +} + +static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ag71xx *ag = file->private_data; + struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; + char *buf; + unsigned int buflen; + unsigned int len = 0; + unsigned long rx_avg = 0; + unsigned long tx_avg = 0; + int ret; + int i; + + buflen = 2048; + buf = kmalloc(buflen, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (stats->rx_count) + rx_avg = stats->rx_packets / stats->rx_count; + + if (stats->tx_count) + tx_avg = stats->tx_packets / stats->tx_count; + + len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n", + "len", "rx", "tx"); + + for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++) + len += snprintf(buf + len, buflen - len, + "%3d: %10lu %10lu\n", + i, stats->rx[i], stats->tx[i]); + + len += snprintf(buf + len, buflen - len, "\n"); + + len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", + "sum", stats->rx_count, stats->tx_count); + len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", + "avg", rx_avg, tx_avg); + len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", + "max", stats->rx_packets_max, stats->tx_packets_max); + len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", + "pkt", stats->rx_packets, stats->tx_packets); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + + return ret; +} + +static const struct file_operations ag71xx_fops_napi_stats = { + .open = ag71xx_debugfs_generic_open, + .read = read_file_napi_stats, + .owner = THIS_MODULE +}; + +#define DESC_PRINT_LEN 64 + +static ssize_t read_file_ring(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos, + struct ag71xx *ag, + struct ag71xx_ring *ring, + unsigned desc_reg) +{ + char *buf; + unsigned int buflen; + unsigned int len = 0; + unsigned long flags; + ssize_t ret; + int curr; + int dirty; + u32 desc_hw; + int i; + + buflen = (ring->size * DESC_PRINT_LEN); + buf = kmalloc(buflen, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + len += snprintf(buf + len, buflen - len, + "Idx ... %-8s %-8s %-8s %-8s . %-10s\n", + "desc", "next", "data", "ctrl", "timestamp"); + + spin_lock_irqsave(&ag->lock, flags); + + curr = (ring->curr % ring->size); + dirty = (ring->dirty % ring->size); + desc_hw = ag71xx_rr(ag, desc_reg); + for (i = 0; i < ring->size; i++) { + struct ag71xx_buf *ab = &ring->buf[i]; + u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size; + + len += snprintf(buf + len, buflen - len, + "%3d %c%c%c %08x %08x %08x %08x %c %10lu\n", + i, + (i == curr) ? 'C' : ' ', + (i == dirty) ? 'D' : ' ', + (desc_hw == desc_dma) ? 'H' : ' ', + desc_dma, + ab->desc->next, + ab->desc->data, + ab->desc->ctrl, + (ab->desc->ctrl & DESC_EMPTY) ? 'E' : '*', + ab->timestamp); + } + + spin_unlock_irqrestore(&ag->lock, flags); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + + return ret; +} + +static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ag71xx *ag = file->private_data; + + return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring, + AG71XX_REG_TX_DESC); +} + +static const struct file_operations ag71xx_fops_tx_ring = { + .open = ag71xx_debugfs_generic_open, + .read = read_file_tx_ring, + .owner = THIS_MODULE +}; + +static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ag71xx *ag = file->private_data; + + return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring, + AG71XX_REG_RX_DESC); +} + +static const struct file_operations ag71xx_fops_rx_ring = { + .open = ag71xx_debugfs_generic_open, + .read = read_file_rx_ring, + .owner = THIS_MODULE +}; + +void ag71xx_debugfs_exit(struct ag71xx *ag) +{ + debugfs_remove_recursive(ag->debug.debugfs_dir); +} + +int ag71xx_debugfs_init(struct ag71xx *ag) +{ + ag->debug.debugfs_dir = debugfs_create_dir(ag->dev->name, + ag71xx_debugfs_root); + if (!ag->debug.debugfs_dir) + return -ENOMEM; + + debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir, + ag, &ag71xx_fops_int_stats); + debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir, + ag, &ag71xx_fops_napi_stats); + debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir, + ag, &ag71xx_fops_tx_ring); + debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir, + ag, &ag71xx_fops_rx_ring); + + return 0; +} + +int ag71xx_debugfs_root_init(void) +{ + if (ag71xx_debugfs_root) + return -EBUSY; + + ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); + if (!ag71xx_debugfs_root) + return -ENOENT; + + return 0; +} + +void ag71xx_debugfs_root_exit(void) +{ + debugfs_remove(ag71xx_debugfs_root); + ag71xx_debugfs_root = NULL; +} diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c new file mode 100644 index 0000000000..498fbed1ff --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c @@ -0,0 +1,124 @@ +/* + * Atheros AR71xx built-in ethernet mac driver + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Based on Atheros' AG7100 driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ag71xx.h" + +static int ag71xx_ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + struct ag71xx *ag = netdev_priv(dev); + struct phy_device *phydev = ag->phy_dev; + + if (!phydev) + return -ENODEV; + + return phy_ethtool_gset(phydev, cmd); +} + +static int ag71xx_ethtool_set_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + struct ag71xx *ag = netdev_priv(dev); + struct phy_device *phydev = ag->phy_dev; + + if (!phydev) + return -ENODEV; + + return phy_ethtool_sset(phydev, cmd); +} + +static void ag71xx_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct ag71xx *ag = netdev_priv(dev); + + strcpy(info->driver, ag->pdev->dev.driver->name); + strcpy(info->version, AG71XX_DRV_VERSION); + strcpy(info->bus_info, dev_name(&ag->pdev->dev)); +} + +static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev) +{ + struct ag71xx *ag = netdev_priv(dev); + + return ag->msg_enable; +} + +static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level) +{ + struct ag71xx *ag = netdev_priv(dev); + + ag->msg_enable = msg_level; +} + +static void ag71xx_ethtool_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *er) +{ + struct ag71xx *ag = netdev_priv(dev); + + er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX; + er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX; + er->rx_mini_max_pending = 0; + er->rx_jumbo_max_pending = 0; + + er->tx_pending = ag->tx_ring.size; + er->rx_pending = ag->rx_ring.size; + er->rx_mini_pending = 0; + er->rx_jumbo_pending = 0; +} + +static int ag71xx_ethtool_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *er) +{ + struct ag71xx *ag = netdev_priv(dev); + unsigned tx_size; + unsigned rx_size; + int err; + + if (er->rx_mini_pending != 0|| + er->rx_jumbo_pending != 0 || + er->rx_pending == 0 || + er->tx_pending == 0) + return -EINVAL; + + tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ? + er->tx_pending : AG71XX_TX_RING_SIZE_MAX; + + rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ? + er->rx_pending : AG71XX_RX_RING_SIZE_MAX; + + if (netif_running(dev)) { + err = dev->netdev_ops->ndo_stop(dev); + if (err) + return err; + } + + ag->tx_ring.size = tx_size; + ag->rx_ring.size = rx_size; + + if (netif_running(dev)) + err = dev->netdev_ops->ndo_open(dev); + + return err; +} + +struct ethtool_ops ag71xx_ethtool_ops = { + .set_settings = ag71xx_ethtool_set_settings, + .get_settings = ag71xx_ethtool_get_settings, + .get_drvinfo = ag71xx_ethtool_get_drvinfo, + .get_msglevel = ag71xx_ethtool_get_msglevel, + .set_msglevel = ag71xx_ethtool_set_msglevel, + .get_ringparam = ag71xx_ethtool_get_ringparam, + .set_ringparam = ag71xx_ethtool_set_ringparam, + .get_link = ethtool_op_get_link, +}; diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c new file mode 100644 index 0000000000..a69ed27d76 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -0,0 +1,1258 @@ +/* + * Atheros AR71xx built-in ethernet mac driver + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Based on Atheros' AG7100 driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ag71xx.h" + +#define AG71XX_DEFAULT_MSG_ENABLE \ + (NETIF_MSG_DRV \ + | NETIF_MSG_PROBE \ + | NETIF_MSG_LINK \ + | NETIF_MSG_TIMER \ + | NETIF_MSG_IFDOWN \ + | NETIF_MSG_IFUP \ + | NETIF_MSG_RX_ERR \ + | NETIF_MSG_TX_ERR) + +static int ag71xx_msg_level = -1; + +module_param_named(msg_level, ag71xx_msg_level, int, 0); +MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)"); + +static void ag71xx_dump_dma_regs(struct ag71xx *ag) +{ + DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_TX_CTRL), + ag71xx_rr(ag, AG71XX_REG_TX_DESC), + ag71xx_rr(ag, AG71XX_REG_TX_STATUS)); + + DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_RX_CTRL), + ag71xx_rr(ag, AG71XX_REG_RX_DESC), + ag71xx_rr(ag, AG71XX_REG_RX_STATUS)); +} + +static void ag71xx_dump_regs(struct ag71xx *ag) +{ + DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_MAC_CFG1), + ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), + ag71xx_rr(ag, AG71XX_REG_MAC_IPG), + ag71xx_rr(ag, AG71XX_REG_MAC_HDX), + ag71xx_rr(ag, AG71XX_REG_MAC_MFL)); + DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), + ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1), + ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2)); + DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); + DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); +} + +static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr) +{ + DBG("%s: %s intr=%08x %s%s%s%s%s%s\n", + ag->dev->name, label, intr, + (intr & AG71XX_INT_TX_PS) ? "TXPS " : "", + (intr & AG71XX_INT_TX_UR) ? "TXUR " : "", + (intr & AG71XX_INT_TX_BE) ? "TXBE " : "", + (intr & AG71XX_INT_RX_PR) ? "RXPR " : "", + (intr & AG71XX_INT_RX_OF) ? "RXOF " : "", + (intr & AG71XX_INT_RX_BE) ? "RXBE " : ""); +} + +static void ag71xx_ring_free(struct ag71xx_ring *ring) +{ + kfree(ring->buf); + + if (ring->descs_cpu) + dma_free_coherent(NULL, ring->size * ring->desc_size, + ring->descs_cpu, ring->descs_dma); +} + +static int ag71xx_ring_alloc(struct ag71xx_ring *ring) +{ + int err; + int i; + + ring->desc_size = sizeof(struct ag71xx_desc); + if (ring->desc_size % cache_line_size()) { + DBG("ag71xx: ring %p, desc size %u rounded to %u\n", + ring, ring->desc_size, + roundup(ring->desc_size, cache_line_size())); + ring->desc_size = roundup(ring->desc_size, cache_line_size()); + } + + ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size, + &ring->descs_dma, GFP_ATOMIC); + if (!ring->descs_cpu) { + err = -ENOMEM; + goto err; + } + + + ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL); + if (!ring->buf) { + err = -ENOMEM; + goto err; + } + + for (i = 0; i < ring->size; i++) { + int idx = i * ring->desc_size; + ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[idx]; + DBG("ag71xx: ring %p, desc %d at %p\n", + ring, i, ring->buf[i].desc); + } + + return 0; + +err: + return err; +} + +static void ag71xx_ring_tx_clean(struct ag71xx *ag) +{ + struct ag71xx_ring *ring = &ag->tx_ring; + struct net_device *dev = ag->dev; + + while (ring->curr != ring->dirty) { + u32 i = ring->dirty % ring->size; + + if (!ag71xx_desc_empty(ring->buf[i].desc)) { + ring->buf[i].desc->ctrl = 0; + dev->stats.tx_errors++; + } + + if (ring->buf[i].skb) + dev_kfree_skb_any(ring->buf[i].skb); + + ring->buf[i].skb = NULL; + + ring->dirty++; + } + + /* flush descriptors */ + wmb(); + +} + +static void ag71xx_ring_tx_init(struct ag71xx *ag) +{ + struct ag71xx_ring *ring = &ag->tx_ring; + int i; + + for (i = 0; i < ring->size; i++) { + ring->buf[i].desc->next = (u32) (ring->descs_dma + + ring->desc_size * ((i + 1) % ring->size)); + + ring->buf[i].desc->ctrl = DESC_EMPTY; + ring->buf[i].skb = NULL; + } + + /* flush descriptors */ + wmb(); + + ring->curr = 0; + ring->dirty = 0; +} + +static void ag71xx_ring_rx_clean(struct ag71xx *ag) +{ + struct ag71xx_ring *ring = &ag->rx_ring; + int i; + + if (!ring->buf) + return; + + for (i = 0; i < ring->size; i++) + if (ring->buf[i].skb) { + dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr, + AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); + kfree_skb(ring->buf[i].skb); + } +} + +static int ag71xx_rx_reserve(struct ag71xx *ag) +{ + int reserve = 0; + + if (ag71xx_get_pdata(ag)->is_ar724x) { + if (!ag71xx_has_ar8216(ag)) + reserve = 2; + + if (ag->phy_dev) + reserve += 4 - (ag->phy_dev->pkt_align % 4); + + reserve %= 4; + } + + return reserve + AG71XX_RX_PKT_RESERVE; +} + + +static int ag71xx_ring_rx_init(struct ag71xx *ag) +{ + struct ag71xx_ring *ring = &ag->rx_ring; + unsigned int reserve = ag71xx_rx_reserve(ag); + unsigned int i; + int ret; + + ret = 0; + for (i = 0; i < ring->size; i++) { + ring->buf[i].desc->next = (u32) (ring->descs_dma + + ring->desc_size * ((i + 1) % ring->size)); + + DBG("ag71xx: RX desc at %p, next is %08x\n", + ring->buf[i].desc, + ring->buf[i].desc->next); + } + + for (i = 0; i < ring->size; i++) { + struct sk_buff *skb; + dma_addr_t dma_addr; + + skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); + if (!skb) { + ret = -ENOMEM; + break; + } + + skb->dev = ag->dev; + skb_reserve(skb, reserve); + + dma_addr = dma_map_single(&ag->dev->dev, skb->data, + AG71XX_RX_PKT_SIZE, + DMA_FROM_DEVICE); + ring->buf[i].skb = skb; + ring->buf[i].dma_addr = dma_addr; + ring->buf[i].desc->data = (u32) dma_addr; + ring->buf[i].desc->ctrl = DESC_EMPTY; + } + + /* flush descriptors */ + wmb(); + + ring->curr = 0; + ring->dirty = 0; + + return ret; +} + +static int ag71xx_ring_rx_refill(struct ag71xx *ag) +{ + struct ag71xx_ring *ring = &ag->rx_ring; + unsigned int reserve = ag71xx_rx_reserve(ag); + unsigned int count; + + count = 0; + for (; ring->curr - ring->dirty > 0; ring->dirty++) { + unsigned int i; + + i = ring->dirty % ring->size; + + if (ring->buf[i].skb == NULL) { + dma_addr_t dma_addr; + struct sk_buff *skb; + + skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); + if (skb == NULL) + break; + + skb_reserve(skb, reserve); + skb->dev = ag->dev; + + dma_addr = dma_map_single(&ag->dev->dev, skb->data, + AG71XX_RX_PKT_SIZE, + DMA_FROM_DEVICE); + + ring->buf[i].skb = skb; + ring->buf[i].dma_addr = dma_addr; + ring->buf[i].desc->data = (u32) dma_addr; + } + + ring->buf[i].desc->ctrl = DESC_EMPTY; + count++; + } + + /* flush descriptors */ + wmb(); + + DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count); + + return count; +} + +static int ag71xx_rings_init(struct ag71xx *ag) +{ + int ret; + + ret = ag71xx_ring_alloc(&ag->tx_ring); + if (ret) + return ret; + + ag71xx_ring_tx_init(ag); + + ret = ag71xx_ring_alloc(&ag->rx_ring); + if (ret) + return ret; + + ret = ag71xx_ring_rx_init(ag); + return ret; +} + +static void ag71xx_rings_cleanup(struct ag71xx *ag) +{ + ag71xx_ring_rx_clean(ag); + ag71xx_ring_free(&ag->rx_ring); + + ag71xx_ring_tx_clean(ag); + ag71xx_ring_free(&ag->tx_ring); +} + +static unsigned char *ag71xx_speed_str(struct ag71xx *ag) +{ + switch (ag->speed) { + case SPEED_1000: + return "1000"; + case SPEED_100: + return "100"; + case SPEED_10: + return "10"; + } + + return "?"; +} + +static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) +{ + u32 t; + + t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16) + | (((u32) mac[3]) << 8) | ((u32) mac[2]); + + ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t); + + t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16); + ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t); +} + +static void ag71xx_dma_reset(struct ag71xx *ag) +{ + u32 val; + int i; + + ag71xx_dump_dma_regs(ag); + + /* stop RX and TX */ + ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); + ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); + + /* + * give the hardware some time to really stop all rx/tx activity + * clearing the descriptors too early causes random memory corruption + */ + mdelay(1); + + /* clear descriptor addresses */ + ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma); + ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma); + + /* clear pending RX/TX interrupts */ + for (i = 0; i < 256; i++) { + ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); + ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); + } + + /* clear pending errors */ + ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF); + ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR); + + val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); + if (val) + pr_alert("%s: unable to clear DMA Rx status: %08x\n", + ag->dev->name, val); + + val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); + + /* mask out reserved bits */ + val &= ~0xff000000; + + if (val) + pr_alert("%s: unable to clear DMA Tx status: %08x\n", + ag->dev->name, val); + + ag71xx_dump_dma_regs(ag); +} + +#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \ + MAC_CFG1_SRX | MAC_CFG1_STX) + +#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT) + +#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \ + FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \ + FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \ + FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \ + FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \ + FIFO_CFG4_VT) + +#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \ + FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \ + FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \ + FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \ + FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \ + FIFO_CFG5_17 | FIFO_CFG5_SF) + +static void ag71xx_hw_stop(struct ag71xx *ag) +{ + /* disable all interrupts and stop the rx/tx engine */ + ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0); + ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); + ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); +} + +static void ag71xx_hw_setup(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + + /* setup MAC configuration registers */ + ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT); + + ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, + MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); + + /* setup max frame length */ + ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN); + + /* setup FIFO configuration registers */ + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT); + if (pdata->is_ar724x) { + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1); + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2); + } else { + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000); + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff); + } + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT); + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT); +} + +static void ag71xx_hw_init(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + u32 reset_mask = pdata->reset_bit; + + ag71xx_hw_stop(ag); + + if (pdata->is_ar724x) { + u32 reset_phy = reset_mask; + + reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY; + reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY); + + ath79_device_reset_set(reset_phy); + mdelay(50); + ath79_device_reset_clear(reset_phy); + mdelay(200); + } + + ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR); + udelay(20); + + ath79_device_reset_set(reset_mask); + mdelay(100); + ath79_device_reset_clear(reset_mask); + mdelay(200); + + ag71xx_hw_setup(ag); + + ag71xx_dma_reset(ag); +} + +static void ag71xx_fast_reset(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + struct net_device *dev = ag->dev; + u32 reset_mask = pdata->reset_bit; + u32 rx_ds, tx_ds; + u32 mii_reg; + + reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC; + + mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG); + rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC); + tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC); + + ath79_device_reset_set(reset_mask); + udelay(10); + ath79_device_reset_clear(reset_mask); + udelay(10); + + ag71xx_dma_reset(ag); + ag71xx_hw_setup(ag); + + ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds); + ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds); + ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg); + + ag71xx_hw_set_macaddr(ag, dev->dev_addr); +} + +static void ag71xx_hw_start(struct ag71xx *ag) +{ + /* start RX engine */ + ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); + + /* enable interrupts */ + ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT); +} + +void ag71xx_link_adjust(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + u32 cfg2; + u32 ifctl; + u32 fifo5; + + if (!ag->link) { + ag71xx_hw_stop(ag); + netif_carrier_off(ag->dev); + if (netif_msg_link(ag)) + pr_info("%s: link down\n", ag->dev->name); + return; + } + + if (pdata->is_ar724x) + ag71xx_fast_reset(ag); + + cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2); + cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX); + cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0; + + ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL); + ifctl &= ~(MAC_IFCTL_SPEED); + + fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5); + fifo5 &= ~FIFO_CFG5_BM; + + switch (ag->speed) { + case SPEED_1000: + cfg2 |= MAC_CFG2_IF_1000; + fifo5 |= FIFO_CFG5_BM; + break; + case SPEED_100: + cfg2 |= MAC_CFG2_IF_10_100; + ifctl |= MAC_IFCTL_SPEED; + break; + case SPEED_10: + cfg2 |= MAC_CFG2_IF_10_100; + break; + default: + BUG(); + return; + } + + if (pdata->is_ar91xx) + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff); + else if (pdata->is_ar724x) + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3); + else + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff); + + if (pdata->set_speed) + pdata->set_speed(ag->speed); + + ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2); + ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5); + ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl); + ag71xx_hw_start(ag); + + netif_carrier_on(ag->dev); + if (netif_msg_link(ag)) + pr_info("%s: link up (%sMbps/%s duplex)\n", + ag->dev->name, + ag71xx_speed_str(ag), + (DUPLEX_FULL == ag->duplex) ? "Full" : "Half"); + + DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); + + DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), + ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); + + DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n", + ag->dev->name, + ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), + ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL)); +} + +static int ag71xx_open(struct net_device *dev) +{ + struct ag71xx *ag = netdev_priv(dev); + int ret; + + ret = ag71xx_rings_init(ag); + if (ret) + goto err; + + napi_enable(&ag->napi); + + netif_carrier_off(dev); + ag71xx_phy_start(ag); + + ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); + ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma); + + ag71xx_hw_set_macaddr(ag, dev->dev_addr); + + netif_start_queue(dev); + + return 0; + +err: + ag71xx_rings_cleanup(ag); + return ret; +} + +static int ag71xx_stop(struct net_device *dev) +{ + struct ag71xx *ag = netdev_priv(dev); + unsigned long flags; + + netif_carrier_off(dev); + ag71xx_phy_stop(ag); + + spin_lock_irqsave(&ag->lock, flags); + + netif_stop_queue(dev); + + ag71xx_hw_stop(ag); + ag71xx_dma_reset(ag); + + napi_disable(&ag->napi); + del_timer_sync(&ag->oom_timer); + + spin_unlock_irqrestore(&ag->lock, flags); + + ag71xx_rings_cleanup(ag); + + return 0; +} + +static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct ag71xx *ag = netdev_priv(dev); + struct ag71xx_ring *ring = &ag->tx_ring; + struct ag71xx_desc *desc; + dma_addr_t dma_addr; + int i; + + i = ring->curr % ring->size; + desc = ring->buf[i].desc; + + if (!ag71xx_desc_empty(desc)) + goto err_drop; + + if (ag71xx_has_ar8216(ag)) + ag71xx_add_ar8216_header(ag, skb); + + if (skb->len <= 0) { + DBG("%s: packet len is too small\n", ag->dev->name); + goto err_drop; + } + + dma_addr = dma_map_single(&dev->dev, skb->data, skb->len, + DMA_TO_DEVICE); + + ring->buf[i].skb = skb; + ring->buf[i].timestamp = jiffies; + + /* setup descriptor fields */ + desc->data = (u32) dma_addr; + desc->ctrl = (skb->len & DESC_PKTLEN_M); + + /* flush descriptor */ + wmb(); + + ring->curr++; + if (ring->curr == (ring->dirty + ring->size)) { + DBG("%s: tx queue full\n", ag->dev->name); + netif_stop_queue(dev); + } + + DBG("%s: packet injected into TX queue\n", ag->dev->name); + + /* enable TX engine */ + ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE); + + return NETDEV_TX_OK; + +err_drop: + dev->stats.tx_dropped++; + + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct ag71xx *ag = netdev_priv(dev); + int ret; + + switch (cmd) { + case SIOCETHTOOL: + if (ag->phy_dev == NULL) + break; + + spin_lock_irq(&ag->lock); + ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data); + spin_unlock_irq(&ag->lock); + return ret; + + case SIOCSIFHWADDR: + if (copy_from_user + (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) + return -EFAULT; + return 0; + + case SIOCGIFHWADDR: + if (copy_to_user + (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) + return -EFAULT; + return 0; + + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (ag->phy_dev == NULL) + break; + + return phy_mii_ioctl(ag->phy_dev, ifr, cmd); + + default: + break; + } + + return -EOPNOTSUPP; +} + +static void ag71xx_oom_timer_handler(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct ag71xx *ag = netdev_priv(dev); + + napi_schedule(&ag->napi); +} + +static void ag71xx_tx_timeout(struct net_device *dev) +{ + struct ag71xx *ag = netdev_priv(dev); + + if (netif_msg_tx_err(ag)) + pr_info("%s: tx timeout\n", ag->dev->name); + + schedule_work(&ag->restart_work); +} + +static void ag71xx_restart_work_func(struct work_struct *work) +{ + struct ag71xx *ag = container_of(work, struct ag71xx, restart_work); + + if (ag71xx_get_pdata(ag)->is_ar724x) { + ag->link = 0; + ag71xx_link_adjust(ag); + return; + } + + ag71xx_stop(ag->dev); + ag71xx_open(ag->dev); +} + +static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp) +{ + u32 rx_sm, tx_sm, rx_fd; + + if (likely(time_before(jiffies, timestamp + HZ/10))) + return false; + + if (!netif_carrier_ok(ag->dev)) + return false; + + rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM); + if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6) + return true; + + tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM); + rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH); + if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) && + ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0) + return true; + + return false; +} + +static int ag71xx_tx_packets(struct ag71xx *ag) +{ + struct ag71xx_ring *ring = &ag->tx_ring; + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + int sent; + + DBG("%s: processing TX ring\n", ag->dev->name); + + sent = 0; + while (ring->dirty != ring->curr) { + unsigned int i = ring->dirty % ring->size; + struct ag71xx_desc *desc = ring->buf[i].desc; + struct sk_buff *skb = ring->buf[i].skb; + + if (!ag71xx_desc_empty(desc)) { + if (pdata->is_ar7240 && + ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp)) + schedule_work(&ag->restart_work); + break; + } + + ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); + + ag->dev->stats.tx_bytes += skb->len; + ag->dev->stats.tx_packets++; + + dev_kfree_skb_any(skb); + ring->buf[i].skb = NULL; + + ring->dirty++; + sent++; + } + + DBG("%s: %d packets sent out\n", ag->dev->name, sent); + + if ((ring->curr - ring->dirty) < (ring->size * 3) / 4) + netif_wake_queue(ag->dev); + + return sent; +} + +static int ag71xx_rx_packets(struct ag71xx *ag, int limit) +{ + struct net_device *dev = ag->dev; + struct ag71xx_ring *ring = &ag->rx_ring; + int done = 0; + + DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n", + dev->name, limit, ring->curr, ring->dirty); + + while (done < limit) { + unsigned int i = ring->curr % ring->size; + struct ag71xx_desc *desc = ring->buf[i].desc; + struct sk_buff *skb; + int pktlen; + int err = 0; + + if (ag71xx_desc_empty(desc)) + break; + + if ((ring->dirty + ring->size) == ring->curr) { + ag71xx_assert(0); + break; + } + + ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); + + skb = ring->buf[i].skb; + pktlen = ag71xx_desc_pktlen(desc); + pktlen -= ETH_FCS_LEN; + + dma_unmap_single(&dev->dev, ring->buf[i].dma_addr, + AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); + + dev->last_rx = jiffies; + dev->stats.rx_packets++; + dev->stats.rx_bytes += pktlen; + + skb_put(skb, pktlen); + if (ag71xx_has_ar8216(ag)) + err = ag71xx_remove_ar8216_header(ag, skb, pktlen); + + if (err) { + dev->stats.rx_dropped++; + kfree_skb(skb); + } else { + skb->dev = dev; + skb->ip_summed = CHECKSUM_NONE; + if (ag->phy_dev) { + ag->phy_dev->netif_receive_skb(skb); + } else { + skb->protocol = eth_type_trans(skb, dev); + netif_receive_skb(skb); + } + } + + ring->buf[i].skb = NULL; + done++; + + ring->curr++; + } + + ag71xx_ring_rx_refill(ag); + + DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n", + dev->name, ring->curr, ring->dirty, done); + + return done; +} + +static int ag71xx_poll(struct napi_struct *napi, int limit) +{ + struct ag71xx *ag = container_of(napi, struct ag71xx, napi); + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + struct net_device *dev = ag->dev; + struct ag71xx_ring *rx_ring; + unsigned long flags; + u32 status; + int tx_done; + int rx_done; + + pdata->ddr_flush(); + tx_done = ag71xx_tx_packets(ag); + + DBG("%s: processing RX ring\n", dev->name); + rx_done = ag71xx_rx_packets(ag, limit); + + ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done); + + rx_ring = &ag->rx_ring; + if (rx_ring->buf[rx_ring->dirty % rx_ring->size].skb == NULL) + goto oom; + + status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); + if (unlikely(status & RX_STATUS_OF)) { + ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF); + dev->stats.rx_fifo_errors++; + + /* restart RX */ + ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); + } + + if (rx_done < limit) { + if (status & RX_STATUS_PR) + goto more; + + status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); + if (status & TX_STATUS_PS) + goto more; + + DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n", + dev->name, rx_done, tx_done, limit); + + napi_complete(napi); + + /* enable interrupts */ + spin_lock_irqsave(&ag->lock, flags); + ag71xx_int_enable(ag, AG71XX_INT_POLL); + spin_unlock_irqrestore(&ag->lock, flags); + return rx_done; + } + +more: + DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n", + dev->name, rx_done, tx_done, limit); + return rx_done; + +oom: + if (netif_msg_rx_err(ag)) + pr_info("%s: out of memory\n", dev->name); + + mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL); + napi_complete(napi); + return 0; +} + +static irqreturn_t ag71xx_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct ag71xx *ag = netdev_priv(dev); + u32 status; + + status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS); + ag71xx_dump_intr(ag, "raw", status); + + if (unlikely(!status)) + return IRQ_NONE; + + if (unlikely(status & AG71XX_INT_ERR)) { + if (status & AG71XX_INT_TX_BE) { + ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE); + dev_err(&dev->dev, "TX BUS error\n"); + } + if (status & AG71XX_INT_RX_BE) { + ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE); + dev_err(&dev->dev, "RX BUS error\n"); + } + } + + if (likely(status & AG71XX_INT_POLL)) { + ag71xx_int_disable(ag, AG71XX_INT_POLL); + DBG("%s: enable polling mode\n", dev->name); + napi_schedule(&ag->napi); + } + + ag71xx_debugfs_update_int_stats(ag, status); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void ag71xx_netpoll(struct net_device *dev) +{ + disable_irq(dev->irq); + ag71xx_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +static const struct net_device_ops ag71xx_netdev_ops = { + .ndo_open = ag71xx_open, + .ndo_stop = ag71xx_stop, + .ndo_start_xmit = ag71xx_hard_start_xmit, + .ndo_do_ioctl = ag71xx_do_ioctl, + .ndo_tx_timeout = ag71xx_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ag71xx_netpoll, +#endif +}; + +static int __devinit ag71xx_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct resource *res; + struct ag71xx *ag; + struct ag71xx_platform_data *pdata; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data specified\n"); + err = -ENXIO; + goto err_out; + } + + if (pdata->mii_bus_dev == NULL) { + dev_err(&pdev->dev, "no MII bus device specified\n"); + err = -EINVAL; + goto err_out; + } + + dev = alloc_etherdev(sizeof(*ag)); + if (!dev) { + dev_err(&pdev->dev, "alloc_etherdev failed\n"); + err = -ENOMEM; + goto err_out; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + + ag = netdev_priv(dev); + ag->pdev = pdev; + ag->dev = dev; + ag->msg_enable = netif_msg_init(ag71xx_msg_level, + AG71XX_DEFAULT_MSG_ENABLE); + spin_lock_init(&ag->lock); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base"); + if (!res) { + dev_err(&pdev->dev, "no mac_base resource found\n"); + err = -ENXIO; + goto err_out; + } + + ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!ag->mac_base) { + dev_err(&pdev->dev, "unable to ioremap mac_base\n"); + err = -ENOMEM; + goto err_free_dev; + } + + dev->irq = platform_get_irq(pdev, 0); + err = request_irq(dev->irq, ag71xx_interrupt, + IRQF_DISABLED, + dev->name, dev); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq); + goto err_unmap_base; + } + + dev->base_addr = (unsigned long)ag->mac_base; + dev->netdev_ops = &ag71xx_netdev_ops; + dev->ethtool_ops = &ag71xx_ethtool_ops; + + INIT_WORK(&ag->restart_work, ag71xx_restart_work_func); + + init_timer(&ag->oom_timer); + ag->oom_timer.data = (unsigned long) dev; + ag->oom_timer.function = ag71xx_oom_timer_handler; + + ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT; + ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT; + + ag->stop_desc = dma_alloc_coherent(NULL, + sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL); + + if (!ag->stop_desc) + goto err_free_irq; + + ag->stop_desc->data = 0; + ag->stop_desc->ctrl = 0; + ag->stop_desc->next = (u32) ag->stop_desc_dma; + + memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN); + + netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT); + + err = register_netdev(dev); + if (err) { + dev_err(&pdev->dev, "unable to register net device\n"); + goto err_free_desc; + } + + pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d\n", + dev->name, dev->base_addr, dev->irq); + + ag71xx_dump_regs(ag); + + ag71xx_hw_init(ag); + + ag71xx_dump_regs(ag); + + err = ag71xx_phy_connect(ag); + if (err) + goto err_unregister_netdev; + + err = ag71xx_debugfs_init(ag); + if (err) + goto err_phy_disconnect; + + platform_set_drvdata(pdev, dev); + + return 0; + +err_phy_disconnect: + ag71xx_phy_disconnect(ag); +err_unregister_netdev: + unregister_netdev(dev); +err_free_desc: + dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc, + ag->stop_desc_dma); +err_free_irq: + free_irq(dev->irq, dev); +err_unmap_base: + iounmap(ag->mac_base); +err_free_dev: + kfree(dev); +err_out: + platform_set_drvdata(pdev, NULL); + return err; +} + +static int __devexit ag71xx_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + if (dev) { + struct ag71xx *ag = netdev_priv(dev); + + ag71xx_debugfs_exit(ag); + ag71xx_phy_disconnect(ag); + unregister_netdev(dev); + free_irq(dev->irq, dev); + iounmap(ag->mac_base); + kfree(dev); + platform_set_drvdata(pdev, NULL); + } + + return 0; +} + +static struct platform_driver ag71xx_driver = { + .probe = ag71xx_probe, + .remove = __exit_p(ag71xx_remove), + .driver = { + .name = AG71XX_DRV_NAME, + } +}; + +static int __init ag71xx_module_init(void) +{ + int ret; + + ret = ag71xx_debugfs_root_init(); + if (ret) + goto err_out; + + ret = ag71xx_mdio_driver_init(); + if (ret) + goto err_debugfs_exit; + + ret = platform_driver_register(&ag71xx_driver); + if (ret) + goto err_mdio_exit; + + return 0; + +err_mdio_exit: + ag71xx_mdio_driver_exit(); +err_debugfs_exit: + ag71xx_debugfs_root_exit(); +err_out: + return ret; +} + +static void __exit ag71xx_module_exit(void) +{ + platform_driver_unregister(&ag71xx_driver); + ag71xx_mdio_driver_exit(); + ag71xx_debugfs_root_exit(); +} + +module_init(ag71xx_module_init); +module_exit(ag71xx_module_exit); + +MODULE_VERSION(AG71XX_DRV_VERSION); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" AG71XX_DRV_NAME); diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c new file mode 100644 index 0000000000..552c7bfbac --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c @@ -0,0 +1,246 @@ +/* + * Atheros AR71xx built-in ethernet mac driver + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Based on Atheros' AG7100 driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ag71xx.h" + +#define AG71XX_MDIO_RETRY 1000 +#define AG71XX_MDIO_DELAY 5 + +static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg, + u32 value) +{ + void __iomem *r; + + r = am->mdio_base + reg; + __raw_writel(value, r); + + /* flush write */ + (void) __raw_readl(r); +} + +static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg) +{ + return __raw_readl(am->mdio_base + reg); +} + +static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am) +{ + DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n", + am->mii_bus->name, + ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG), + ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD), + ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR)); + DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n", + am->mii_bus->name, + ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL), + ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS), + ag71xx_mdio_rr(am, AG71XX_REG_MII_IND)); +} + +int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg) +{ + int ret; + int i; + + ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); + ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, + ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); + ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ); + + i = AG71XX_MDIO_RETRY; + while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { + if (i-- == 0) { + pr_err("%s: mii_read timed out\n", am->mii_bus->name); + ret = 0xffff; + goto out; + } + udelay(AG71XX_MDIO_DELAY); + } + + ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff; + ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); + + DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret); + +out: + return ret; +} + +void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val) +{ + int i; + + DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val); + + ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, + ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); + ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val); + + i = AG71XX_MDIO_RETRY; + while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { + if (i-- == 0) { + pr_err("%s: mii_write timed out\n", am->mii_bus->name); + break; + } + udelay(AG71XX_MDIO_DELAY); + } +} + +static int ag71xx_mdio_reset(struct mii_bus *bus) +{ + struct ag71xx_mdio *am = bus->priv; + u32 t; + + if (am->pdata->is_ar7240) + t = MII_CFG_CLK_DIV_6; + else + t = MII_CFG_CLK_DIV_28; + + ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET); + udelay(100); + + ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t); + udelay(100); + + return 0; +} + +static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg) +{ + struct ag71xx_mdio *am = bus->priv; + + if (am->pdata->is_ar7240) + return ar7240sw_phy_read(bus, addr, reg); + else + return ag71xx_mdio_mii_read(am, addr, reg); +} + +static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val) +{ + struct ag71xx_mdio *am = bus->priv; + + if (am->pdata->is_ar7240) + ar7240sw_phy_write(bus, addr, reg, val); + else + ag71xx_mdio_mii_write(am, addr, reg, val); + return 0; +} + +static int __devinit ag71xx_mdio_probe(struct platform_device *pdev) +{ + struct ag71xx_mdio_platform_data *pdata; + struct ag71xx_mdio *am; + struct resource *res; + int i; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data specified\n"); + return -EINVAL; + } + + am = kzalloc(sizeof(*am), GFP_KERNEL); + if (!am) { + err = -ENOMEM; + goto err_out; + } + + am->pdata = pdata; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no iomem resource found\n"); + err = -ENXIO; + goto err_out; + } + + am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!am->mdio_base) { + dev_err(&pdev->dev, "unable to ioremap registers\n"); + err = -ENOMEM; + goto err_free_mdio; + } + + am->mii_bus = mdiobus_alloc(); + if (am->mii_bus == NULL) { + err = -ENOMEM; + goto err_iounmap; + } + + am->mii_bus->name = "ag71xx_mdio"; + am->mii_bus->read = ag71xx_mdio_read; + am->mii_bus->write = ag71xx_mdio_write; + am->mii_bus->reset = ag71xx_mdio_reset; + am->mii_bus->irq = am->mii_irq; + am->mii_bus->priv = am; + am->mii_bus->parent = &pdev->dev; + snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); + am->mii_bus->phy_mask = pdata->phy_mask; + + for (i = 0; i < PHY_MAX_ADDR; i++) + am->mii_irq[i] = PHY_POLL; + + ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0); + + err = mdiobus_register(am->mii_bus); + if (err) + goto err_free_bus; + + ag71xx_mdio_dump_regs(am); + + platform_set_drvdata(pdev, am); + return 0; + +err_free_bus: + mdiobus_free(am->mii_bus); +err_iounmap: + iounmap(am->mdio_base); +err_free_mdio: + kfree(am); +err_out: + return err; +} + +static int __devexit ag71xx_mdio_remove(struct platform_device *pdev) +{ + struct ag71xx_mdio *am = platform_get_drvdata(pdev); + + if (am) { + mdiobus_unregister(am->mii_bus); + mdiobus_free(am->mii_bus); + iounmap(am->mdio_base); + kfree(am); + platform_set_drvdata(pdev, NULL); + } + + return 0; +} + +static struct platform_driver ag71xx_mdio_driver = { + .probe = ag71xx_mdio_probe, + .remove = __exit_p(ag71xx_mdio_remove), + .driver = { + .name = "ag71xx-mdio", + } +}; + +int __init ag71xx_mdio_driver_init(void) +{ + return platform_driver_register(&ag71xx_mdio_driver); +} + +void ag71xx_mdio_driver_exit(void) +{ + platform_driver_unregister(&ag71xx_mdio_driver); +} diff --git a/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c new file mode 100644 index 0000000000..ebdbc5b9ac --- /dev/null +++ b/target/linux/ar71xx/files-3.2/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c @@ -0,0 +1,235 @@ +/* + * Atheros AR71xx built-in ethernet mac driver + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Based on Atheros' AG7100 driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ag71xx.h" + +static void ag71xx_phy_link_adjust(struct net_device *dev) +{ + struct ag71xx *ag = netdev_priv(dev); + struct phy_device *phydev = ag->phy_dev; + unsigned long flags; + int status_change = 0; + + spin_lock_irqsave(&ag->lock, flags); + + if (phydev->link) { + if (ag->duplex != phydev->duplex + || ag->speed != phydev->speed) { + status_change = 1; + } + } + + if (phydev->link != ag->link) + status_change = 1; + + ag->link = phydev->link; + ag->duplex = phydev->duplex; + ag->speed = phydev->speed; + + if (status_change) + ag71xx_link_adjust(ag); + + spin_unlock_irqrestore(&ag->lock, flags); +} + +void ag71xx_phy_start(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + + if (ag->phy_dev) { + phy_start(ag->phy_dev); + } else if (pdata->switch_data) { + ag71xx_ar7240_start(ag); + } else { + ag->link = 1; + ag71xx_link_adjust(ag); + } +} + +void ag71xx_phy_stop(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + unsigned long flags; + + if (ag->phy_dev) + phy_stop(ag->phy_dev); + else if (pdata->switch_data) + ag71xx_ar7240_stop(ag); + + spin_lock_irqsave(&ag->lock, flags); + if (ag->link) { + ag->link = 0; + ag71xx_link_adjust(ag); + } + spin_unlock_irqrestore(&ag->lock, flags); +} + +static int ag71xx_phy_connect_fixed(struct ag71xx *ag) +{ + struct net_device *dev = ag->dev; + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + int ret = 0; + + /* use fixed settings */ + switch (pdata->speed) { + case SPEED_10: + case SPEED_100: + case SPEED_1000: + break; + default: + netdev_err(dev, "invalid speed specified\n"); + ret = -EINVAL; + break; + } + + netdev_dbg(dev, "using fixed link parameters\n"); + + ag->duplex = pdata->duplex; + ag->speed = pdata->speed; + + return ret; +} + +static int ag71xx_phy_connect_multi(struct ag71xx *ag) +{ + struct net_device *dev = ag->dev; + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + struct phy_device *phydev = NULL; + int phy_addr; + int ret = 0; + + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + if (!(pdata->phy_mask & (1 << phy_addr))) + continue; + + if (ag->mii_bus->phy_map[phy_addr] == NULL) + continue; + + DBG("%s: PHY found at %s, uid=%08x\n", + dev->name, + dev_name(&ag->mii_bus->phy_map[phy_addr]->dev), + ag->mii_bus->phy_map[phy_addr]->phy_id); + + if (phydev == NULL) + phydev = ag->mii_bus->phy_map[phy_addr]; + } + + if (!phydev) { + netdev_err(dev, "no PHY found with phy_mask=%08x\n", + pdata->phy_mask); + return -ENODEV; + } + + ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev), + &ag71xx_phy_link_adjust, 0, + pdata->phy_if_mode); + + if (IS_ERR(ag->phy_dev)) { + netdev_err(dev, "could not connect to PHY at %s\n", + dev_name(&phydev->dev)); + return PTR_ERR(ag->phy_dev); + } + + /* mask with MAC supported features */ + if (pdata->has_gbit) + phydev->supported &= PHY_GBIT_FEATURES; + else + phydev->supported &= PHY_BASIC_FEATURES; + + phydev->advertising = phydev->supported; + + netdev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n", + dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name); + + ag->link = 0; + ag->speed = 0; + ag->duplex = -1; + + return ret; +} + +static int dev_is_class(struct device *dev, void *class) +{ + if (dev->class != NULL && !strcmp(dev->class->name, class)) + return 1; + + return 0; +} + +static struct device *dev_find_class(struct device *parent, char *class) +{ + if (dev_is_class(parent, class)) { + get_device(parent); + return parent; + } + + return device_find_child(parent, class, dev_is_class); +} + +static struct mii_bus *dev_to_mii_bus(struct device *dev) +{ + struct device *d; + + d = dev_find_class(dev, "mdio_bus"); + if (d != NULL) { + struct mii_bus *bus; + + bus = to_mii_bus(d); + put_device(d); + + return bus; + } + + return NULL; +} + +int __devinit ag71xx_phy_connect(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + + if (pdata->mii_bus_dev == NULL || + pdata->mii_bus_dev->bus == NULL ) + return ag71xx_phy_connect_fixed(ag); + + ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev); + if (ag->mii_bus == NULL) { + netdev_err(ag->dev, "unable to find MII bus on device '%s'\n", + dev_name(pdata->mii_bus_dev)); + return -ENODEV; + } + + /* Reset the mdio bus explicitly */ + if (ag->mii_bus->reset) { + mutex_lock(&ag->mii_bus->mdio_lock); + ag->mii_bus->reset(ag->mii_bus); + mutex_unlock(&ag->mii_bus->mdio_lock); + } + + if (pdata->switch_data) + return ag71xx_ar7240_init(ag); + + if (pdata->phy_mask) + return ag71xx_phy_connect_multi(ag); + + return ag71xx_phy_connect_fixed(ag); +} + +void ag71xx_phy_disconnect(struct ag71xx *ag) +{ + struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + + if (pdata->switch_data) + ag71xx_ar7240_cleanup(ag); + else if (ag->phy_dev) + phy_disconnect(ag->phy_dev); +} diff --git a/target/linux/ar71xx/patches-3.2/001-MIPS-ath79-Change-number-of-available-IRQs.patch b/target/linux/ar71xx/patches-3.2/001-MIPS-ath79-Change-number-of-available-IRQs.patch new file mode 100644 index 0000000000..1313eea8fd --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/001-MIPS-ath79-Change-number-of-available-IRQs.patch @@ -0,0 +1,32 @@ +From 781c5ae32a2e8aede2e1756dfbea1abb3cf09ffc Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 5 Jun 2011 23:38:44 +0200 +Subject: [PATCH 01/27] MIPS: ath79: Change number of available IRQs + +The status register of the miscellaneous interrupt controller is 32 bits +wide, but the actual value of NR_IRQS covers only 8 of them. Change +NR_IRQS in order to make all of those interrupt lines usable. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/2441/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/include/asm/mach-ath79/irq.h | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/mips/include/asm/mach-ath79/irq.h ++++ b/arch/mips/include/asm/mach-ath79/irq.h +@@ -10,10 +10,10 @@ + #define __ASM_MACH_ATH79_IRQ_H + + #define MIPS_CPU_IRQ_BASE 0 +-#define NR_IRQS 16 ++#define NR_IRQS 40 + + #define ATH79_MISC_IRQ_BASE 8 +-#define ATH79_MISC_IRQ_COUNT 8 ++#define ATH79_MISC_IRQ_COUNT 32 + + #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2) + #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3) diff --git a/target/linux/ar71xx/patches-3.2/002-MIPS-ath79-Handle-more-MISC-IRQs.patch b/target/linux/ar71xx/patches-3.2/002-MIPS-ath79-Handle-more-MISC-IRQs.patch new file mode 100644 index 0000000000..9397230d68 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/002-MIPS-ath79-Handle-more-MISC-IRQs.patch @@ -0,0 +1,72 @@ +From 9951cfc88b5d818391bebc7a56b678942b89721e Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 5 Jun 2011 23:38:45 +0200 +Subject: [PATCH 02/27] MIPS: ath79: Handle more MISC IRQs + +The AR724X SoCs have more IRQ sources hooked into the MISC IRQ controller. +The patch adds support for them. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/2440/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/irq.c | 12 ++++++++++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++++ + arch/mips/include/asm/mach-ath79/irq.h | 4 ++++ + 3 files changed, 20 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -46,6 +46,15 @@ static void ath79_misc_irq_handler(unsig + else if (pending & MISC_INT_TIMER) + generic_handle_irq(ATH79_MISC_IRQ_TIMER); + ++ else if (pending & MISC_INT_TIMER2) ++ generic_handle_irq(ATH79_MISC_IRQ_TIMER2); ++ ++ else if (pending & MISC_INT_TIMER3) ++ generic_handle_irq(ATH79_MISC_IRQ_TIMER3); ++ ++ else if (pending & MISC_INT_TIMER4) ++ generic_handle_irq(ATH79_MISC_IRQ_TIMER4); ++ + else if (pending & MISC_INT_OHCI) + generic_handle_irq(ATH79_MISC_IRQ_OHCI); + +@@ -58,6 +67,9 @@ static void ath79_misc_irq_handler(unsig + else if (pending & MISC_INT_WDOG) + generic_handle_irq(ATH79_MISC_IRQ_WDOG); + ++ else if (pending & MISC_INT_ETHSW) ++ generic_handle_irq(ATH79_MISC_IRQ_ETHSW); ++ + else + spurious_interrupt(); + } +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -130,6 +130,10 @@ + + #define AR724X_RESET_REG_RESET_MODULE 0x1c + ++#define MISC_INT_ETHSW BIT(12) ++#define MISC_INT_TIMER4 BIT(10) ++#define MISC_INT_TIMER3 BIT(9) ++#define MISC_INT_TIMER2 BIT(8) + #define MISC_INT_DMA BIT(7) + #define MISC_INT_OHCI BIT(6) + #define MISC_INT_PERFC BIT(5) +--- a/arch/mips/include/asm/mach-ath79/irq.h ++++ b/arch/mips/include/asm/mach-ath79/irq.h +@@ -30,6 +30,10 @@ + #define ATH79_MISC_IRQ_PERFC (ATH79_MISC_IRQ_BASE + 5) + #define ATH79_MISC_IRQ_OHCI (ATH79_MISC_IRQ_BASE + 6) + #define ATH79_MISC_IRQ_DMA (ATH79_MISC_IRQ_BASE + 7) ++#define ATH79_MISC_IRQ_TIMER2 (ATH79_MISC_IRQ_BASE + 8) ++#define ATH79_MISC_IRQ_TIMER3 (ATH79_MISC_IRQ_BASE + 9) ++#define ATH79_MISC_IRQ_TIMER4 (ATH79_MISC_IRQ_BASE + 10) ++#define ATH79_MISC_IRQ_ETHSW (ATH79_MISC_IRQ_BASE + 12) + + #include_next <irq.h> + diff --git a/target/linux/ar71xx/patches-3.2/003-MIPS-ath79-add-common-USB-Host-Controller-device.patch b/target/linux/ar71xx/patches-3.2/003-MIPS-ath79-add-common-USB-Host-Controller-device.patch new file mode 100644 index 0000000000..dbfb80c69b --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/003-MIPS-ath79-add-common-USB-Host-Controller-device.patch @@ -0,0 +1,375 @@ +From cb888b2552199ace429731b772d5257c598d53df Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 5 Jun 2011 23:38:46 +0200 +Subject: [PATCH 03/27] MIPS: ath79: add common USB Host Controller device + +Add common platform_device and helper code to make the registration of +the built-in USB controllers easier on the board which are using them. +Also register the USB controller on the AP81 and PB44 boards. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Signed-off-by: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/2442/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/Kconfig | 5 + + arch/mips/ath79/Makefile | 1 + + arch/mips/ath79/dev-usb.c | 178 ++++++++++++++++++++++++ + arch/mips/ath79/dev-usb.h | 17 +++ + arch/mips/ath79/mach-ap81.c | 2 + + arch/mips/ath79/mach-pb44.c | 2 + + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 32 ++++- + 7 files changed, 236 insertions(+), 1 deletions(-) + create mode 100644 arch/mips/ath79/dev-usb.c + create mode 100644 arch/mips/ath79/dev-usb.h + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -9,6 +9,7 @@ config ATH79_MACH_AP81 + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI ++ select ATH79_DEV_USB + help + Say 'Y' here if you want your kernel to support the + Atheros AP81 reference board. +@@ -19,6 +20,7 @@ config ATH79_MACH_PB44 + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI ++ select ATH79_DEV_USB + help + Say 'Y' here if you want your kernel to support the + Atheros PB44 reference board. +@@ -52,4 +54,7 @@ config ATH79_DEV_LEDS_GPIO + config ATH79_DEV_SPI + def_bool n + ++config ATH79_DEV_USB ++ def_bool n ++ + endif +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += d + obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o + obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o + obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o ++obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o + + # + # Machines +--- /dev/null ++++ b/arch/mips/ath79/dev-usb.c +@@ -0,0 +1,178 @@ ++/* ++ * Atheros AR7XXX/AR9XXX USB Host Controller device ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/irq.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++ ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include "common.h" ++#include "dev-usb.h" ++ ++static struct resource ath79_ohci_resources[] = { ++ [0] = { ++ /* .start and .end fields are filled dynamically */ ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = ATH79_MISC_IRQ_OHCI, ++ .end = ATH79_MISC_IRQ_OHCI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32); ++static struct platform_device ath79_ohci_device = { ++ .name = "ath79-ohci", ++ .id = -1, ++ .resource = ath79_ohci_resources, ++ .num_resources = ARRAY_SIZE(ath79_ohci_resources), ++ .dev = { ++ .dma_mask = &ath79_ohci_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++}; ++ ++static struct resource ath79_ehci_resources[] = { ++ [0] = { ++ /* .start and .end fields are filled dynamically */ ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = ATH79_CPU_IRQ_USB, ++ .end = ATH79_CPU_IRQ_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); ++static struct platform_device ath79_ehci_device = { ++ .name = "ath79-ehci", ++ .id = -1, ++ .resource = ath79_ehci_resources, ++ .num_resources = ARRAY_SIZE(ath79_ehci_resources), ++ .dev = { ++ .dma_mask = &ath79_ehci_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++}; ++ ++#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ ++ AR71XX_RESET_USB_PHY | \ ++ AR71XX_RESET_USB_OHCI_DLL) ++ ++static void __init ath79_usb_setup(void) ++{ ++ void __iomem *usb_ctrl_base; ++ ++ ath79_device_reset_set(AR71XX_USB_RESET_MASK); ++ mdelay(1000); ++ ath79_device_reset_clear(AR71XX_USB_RESET_MASK); ++ ++ usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); ++ ++ /* Turning on the Buff and Desc swap bits */ ++ __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG); ++ ++ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ ++ __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); ++ ++ iounmap(usb_ctrl_base); ++ ++ mdelay(900); ++ ++ ath79_ohci_resources[0].start = AR71XX_OHCI_BASE; ++ ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1; ++ platform_device_register(&ath79_ohci_device); ++ ++ ath79_ehci_resources[0].start = AR71XX_EHCI_BASE; ++ ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1; ++ ath79_ehci_device.name = "ar71xx-ehci"; ++ platform_device_register(&ath79_ehci_device); ++} ++ ++static void __init ar7240_usb_setup(void) ++{ ++ void __iomem *usb_ctrl_base; ++ ++ ath79_device_reset_clear(AR7240_RESET_OHCI_DLL); ++ ath79_device_reset_set(AR7240_RESET_USB_HOST); ++ ++ mdelay(1000); ++ ++ ath79_device_reset_set(AR7240_RESET_OHCI_DLL); ++ ath79_device_reset_clear(AR7240_RESET_USB_HOST); ++ ++ usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE); ++ ++ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ ++ __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); ++ ++ iounmap(usb_ctrl_base); ++ ++ ath79_ohci_resources[0].start = AR7240_OHCI_BASE; ++ ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; ++ platform_device_register(&ath79_ohci_device); ++} ++ ++static void __init ar724x_usb_setup(void) ++{ ++ ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE); ++ mdelay(10); ++ ++ ath79_device_reset_clear(AR724X_RESET_USB_HOST); ++ mdelay(10); ++ ++ ath79_device_reset_clear(AR724X_RESET_USB_PHY); ++ mdelay(10); ++ ++ ath79_ehci_resources[0].start = AR724X_EHCI_BASE; ++ ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1; ++ ath79_ehci_device.name = "ar724x-ehci"; ++ platform_device_register(&ath79_ehci_device); ++} ++ ++static void __init ar913x_usb_setup(void) ++{ ++ ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE); ++ mdelay(10); ++ ++ ath79_device_reset_clear(AR913X_RESET_USB_HOST); ++ mdelay(10); ++ ++ ath79_device_reset_clear(AR913X_RESET_USB_PHY); ++ mdelay(10); ++ ++ ath79_ehci_resources[0].start = AR913X_EHCI_BASE; ++ ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1; ++ ath79_ehci_device.name = "ar913x-ehci"; ++ platform_device_register(&ath79_ehci_device); ++} ++ ++void __init ath79_register_usb(void) ++{ ++ if (soc_is_ar71xx()) ++ ath79_usb_setup(); ++ else if (soc_is_ar7240()) ++ ar7240_usb_setup(); ++ else if (soc_is_ar7241() || soc_is_ar7242()) ++ ar724x_usb_setup(); ++ else if (soc_is_ar913x()) ++ ar913x_usb_setup(); ++ else ++ BUG(); ++} +--- /dev/null ++++ b/arch/mips/ath79/dev-usb.h +@@ -0,0 +1,17 @@ ++/* ++ * Atheros AR71XX/AR724X/AR913X USB Host Controller support ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _ATH79_DEV_USB_H ++#define _ATH79_DEV_USB_H ++ ++void ath79_register_usb(void); ++ ++#endif /* _ATH79_DEV_USB_H */ +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -14,6 +14,7 @@ + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" ++#include "dev-usb.h" + + #define AP81_GPIO_LED_STATUS 1 + #define AP81_GPIO_LED_AOSS 3 +@@ -92,6 +93,7 @@ static void __init ap81_setup(void) + ath79_register_spi(&ap81_spi_data, ap81_spi_info, + ARRAY_SIZE(ap81_spi_info)); + ath79_register_ar913x_wmac(cal_data); ++ ath79_register_usb(); + } + + MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", +--- a/arch/mips/ath79/mach-pb44.c ++++ b/arch/mips/ath79/mach-pb44.c +@@ -18,6 +18,7 @@ + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" ++#include "dev-usb.h" + + #define PB44_GPIO_I2C_SCL 0 + #define PB44_GPIO_I2C_SDA 1 +@@ -112,6 +113,7 @@ static void __init pb44_init(void) + pb44_gpio_keys); + ath79_register_spi(&pb44_spi_data, pb44_spi_info, + ARRAY_SIZE(pb44_spi_info)); ++ ath79_register_usb(); + } + + MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -20,6 +20,10 @@ + #include <linux/bitops.h> + + #define AR71XX_APB_BASE 0x18000000 ++#define AR71XX_EHCI_BASE 0x1b000000 ++#define AR71XX_EHCI_SIZE 0x1000 ++#define AR71XX_OHCI_BASE 0x1c000000 ++#define AR71XX_OHCI_SIZE 0x1000 + #define AR71XX_SPI_BASE 0x1f000000 + #define AR71XX_SPI_SIZE 0x01000000 + +@@ -27,6 +31,8 @@ + #define AR71XX_DDR_CTRL_SIZE 0x100 + #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) + #define AR71XX_UART_SIZE 0x100 ++#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) ++#define AR71XX_USB_CTRL_SIZE 0x100 + #define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) + #define AR71XX_GPIO_SIZE 0x100 + #define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) +@@ -34,6 +40,16 @@ + #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) + #define AR71XX_RESET_SIZE 0x100 + ++#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) ++#define AR7240_USB_CTRL_SIZE 0x100 ++#define AR7240_OHCI_BASE 0x1b000000 ++#define AR7240_OHCI_SIZE 0x1000 ++ ++#define AR724X_EHCI_BASE 0x1b000000 ++#define AR724X_EHCI_SIZE 0x1000 ++ ++#define AR913X_EHCI_BASE 0x1b000000 ++#define AR913X_EHCI_SIZE 0x1000 + #define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) + #define AR913X_WMAC_SIZE 0x30000 + +@@ -105,6 +121,12 @@ + #define AR913X_AHB_DIV_MASK 0x1 + + /* ++ * USB_CONFIG block ++ */ ++#define AR71XX_USB_CTRL_REG_FLADJ 0x00 ++#define AR71XX_USB_CTRL_REG_CONFIG 0x04 ++ ++/* + * RESET block + */ + #define AR71XX_RESET_REG_TIMER 0x00 +@@ -162,14 +184,22 @@ + #define AR71XX_RESET_PCI_BUS BIT(1) + #define AR71XX_RESET_PCI_CORE BIT(0) + ++#define AR7240_RESET_USB_HOST BIT(5) ++#define AR7240_RESET_OHCI_DLL BIT(3) ++ + #define AR724X_RESET_GE1_MDIO BIT(23) + #define AR724X_RESET_GE0_MDIO BIT(22) + #define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) + #define AR724X_RESET_PCIE_PHY BIT(7) + #define AR724X_RESET_PCIE BIT(6) +-#define AR724X_RESET_OHCI_DLL BIT(3) ++#define AR724X_RESET_USB_HOST BIT(5) ++#define AR724X_RESET_USB_PHY BIT(4) ++#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) + + #define AR913X_RESET_AMBA2WMAC BIT(22) ++#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) ++#define AR913X_RESET_USB_HOST BIT(5) ++#define AR913X_RESET_USB_PHY BIT(4) + + #define REV_ID_MAJOR_MASK 0xfff0 + #define REV_ID_MAJOR_AR71XX 0x00a0 diff --git a/target/linux/ar71xx/patches-3.2/004-MIPS-ath79-Remove-superfluous-parentheses.patch b/target/linux/ar71xx/patches-3.2/004-MIPS-ath79-Remove-superfluous-parentheses.patch new file mode 100644 index 0000000000..e17d06a3e5 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/004-MIPS-ath79-Remove-superfluous-parentheses.patch @@ -0,0 +1,40 @@ +From 44f70a7cd3c0a8481877174a0f12b013c5667933 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:01 +0200 +Subject: [PATCH 04/27] MIPS: ath79: Remove superfluous parentheses + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2519/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/setup.c | 6 +++--- + 1 files changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -101,19 +101,19 @@ static void __init ath79_detect_sys_type + case REV_ID_MAJOR_AR7240: + ath79_soc = ATH79_SOC_AR7240; + chip = "7240"; +- rev = (id & AR724X_REV_ID_REVISION_MASK); ++ rev = id & AR724X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR7241: + ath79_soc = ATH79_SOC_AR7241; + chip = "7241"; +- rev = (id & AR724X_REV_ID_REVISION_MASK); ++ rev = id & AR724X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR7242: + ath79_soc = ATH79_SOC_AR7242; + chip = "7242"; +- rev = (id & AR724X_REV_ID_REVISION_MASK); ++ rev = id & AR724X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR913X: diff --git a/target/linux/ar71xx/patches-3.2/005-MIPS-ath79-add-revision-id-for-the-AR933X-SoCs.patch b/target/linux/ar71xx/patches-3.2/005-MIPS-ath79-add-revision-id-for-the-AR933X-SoCs.patch new file mode 100644 index 0000000000..ddb8589c82 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/005-MIPS-ath79-add-revision-id-for-the-AR933X-SoCs.patch @@ -0,0 +1,71 @@ +From a6b04a056cd63e9241b94bc5dcc8847fa4cb1d34 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Thu, 23 Jun 2011 18:13:14 +0200 +Subject: [PATCH 05/27] MIPS: ath79: add revision id for the AR933X SoCs + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2538/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/setup.c | 12 ++++++++++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++++ + arch/mips/include/asm/mach-ath79/ath79.h | 4 +++- + 3 files changed, 19 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -116,6 +116,18 @@ static void __init ath79_detect_sys_type + rev = id & AR724X_REV_ID_REVISION_MASK; + break; + ++ case REV_ID_MAJOR_AR9330: ++ ath79_soc = ATH79_SOC_AR9330; ++ chip = "9330"; ++ rev = id & AR933X_REV_ID_REVISION_MASK; ++ break; ++ ++ case REV_ID_MAJOR_AR9331: ++ ath79_soc = ATH79_SOC_AR9331; ++ chip = "9331"; ++ rev = id & AR933X_REV_ID_REVISION_MASK; ++ break; ++ + case REV_ID_MAJOR_AR913X: + minor = id & AR913X_REV_ID_MINOR_MASK; + rev = id >> AR913X_REV_ID_REVISION_SHIFT; +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -207,6 +207,8 @@ + #define REV_ID_MAJOR_AR7240 0x00c0 + #define REV_ID_MAJOR_AR7241 0x0100 + #define REV_ID_MAJOR_AR7242 0x1100 ++#define REV_ID_MAJOR_AR9330 0x0110 ++#define REV_ID_MAJOR_AR9331 0x1110 + + #define AR71XX_REV_ID_MINOR_MASK 0x3 + #define AR71XX_REV_ID_MINOR_AR7130 0x0 +@@ -221,6 +223,8 @@ + #define AR913X_REV_ID_REVISION_MASK 0x3 + #define AR913X_REV_ID_REVISION_SHIFT 2 + ++#define AR933X_REV_ID_REVISION_MASK 0x3 ++ + #define AR724X_REV_ID_REVISION_MASK 0x3 + + /* +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -26,7 +26,9 @@ enum ath79_soc_type { + ATH79_SOC_AR7241, + ATH79_SOC_AR7242, + ATH79_SOC_AR9130, +- ATH79_SOC_AR9132 ++ ATH79_SOC_AR9132, ++ ATH79_SOC_AR9330, ++ ATH79_SOC_AR9331, + }; + + extern enum ath79_soc_type ath79_soc; diff --git a/target/linux/ar71xx/patches-3.2/006-MIPS-ath79-Add-early-printk-support-for-the-AR933X-S.patch b/target/linux/ar71xx/patches-3.2/006-MIPS-ath79-Add-early-printk-support-for-the-AR933X-S.patch new file mode 100644 index 0000000000..557700899d --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/006-MIPS-ath79-Add-early-printk-support-for-the-AR933X-S.patch @@ -0,0 +1,208 @@ +From 84ead7964e423c37a73da30a1a2c4c486f74242d Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:03 +0200 +Subject: [PATCH 06/27] MIPS: ath79: Add early printk support for the AR933X SoCs + +The AR933X SoCs are using a different UART, thus require +different code for early printk support. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2521/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/early_printk.c | 76 +++++++++++++++++++++--- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 + + arch/mips/include/asm/mach-ath79/ar933x_uart.h | 67 +++++++++++++++++++++ + 3 files changed, 137 insertions(+), 9 deletions(-) + create mode 100644 arch/mips/include/asm/mach-ath79/ar933x_uart.h + +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -1,7 +1,7 @@ + /* +- * Atheros AR71XX/AR724X/AR913X SoC early printk support ++ * Atheros AR7XXX/AR9XXX SoC early printk support + * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it +@@ -10,27 +10,85 @@ + */ + + #include <linux/io.h> ++#include <linux/errno.h> + #include <linux/serial_reg.h> + #include <asm/addrspace.h> + ++#include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ar933x_uart.h> + +-static inline void prom_wait_thre(void __iomem *base) ++static void (*_prom_putchar) (unsigned char); ++ ++static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val) + { +- u32 lsr; ++ u32 t; + + do { +- lsr = __raw_readl(base + UART_LSR * 4); +- if (lsr & UART_LSR_THRE) ++ t = __raw_readl(reg); ++ if ((t & mask) == val) + break; + } while (1); + } + +-void prom_putchar(unsigned char ch) ++static void prom_putchar_ar71xx(unsigned char ch) + { + void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); + +- prom_wait_thre(base); ++ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); + __raw_writel(ch, base + UART_TX * 4); +- prom_wait_thre(base); ++ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); ++} ++ ++static void prom_putchar_ar933x(unsigned char ch) ++{ ++ void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE)); ++ ++ prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, ++ AR933X_UART_DATA_TX_CSR); ++ __raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG); ++ prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, ++ AR933X_UART_DATA_TX_CSR); ++} ++ ++static void prom_putchar_dummy(unsigned char ch) ++{ ++ /* nothing to do */ ++} ++ ++static void prom_putchar_init(void) ++{ ++ void __iomem *base; ++ u32 id; ++ ++ base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE)); ++ id = __raw_readl(base + AR71XX_RESET_REG_REV_ID); ++ id &= REV_ID_MAJOR_MASK; ++ ++ switch (id) { ++ case REV_ID_MAJOR_AR71XX: ++ case REV_ID_MAJOR_AR7240: ++ case REV_ID_MAJOR_AR7241: ++ case REV_ID_MAJOR_AR7242: ++ case REV_ID_MAJOR_AR913X: ++ _prom_putchar = prom_putchar_ar71xx; ++ break; ++ ++ case REV_ID_MAJOR_AR9330: ++ case REV_ID_MAJOR_AR9331: ++ _prom_putchar = prom_putchar_ar933x; ++ break; ++ ++ default: ++ _prom_putchar = prom_putchar_dummy; ++ break; ++ } ++} ++ ++void prom_putchar(unsigned char ch) ++{ ++ if (!_prom_putchar) ++ prom_putchar_init(); ++ ++ _prom_putchar(ch); + } +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -53,6 +53,9 @@ + #define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) + #define AR913X_WMAC_SIZE 0x30000 + ++#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) ++#define AR933X_UART_SIZE 0x14 ++ + /* + * DDR_CTRL block + */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h +@@ -0,0 +1,67 @@ ++/* ++ * Atheros AR933X UART defines ++ * ++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __AR933X_UART_H ++#define __AR933X_UART_H ++ ++#define AR933X_UART_REGS_SIZE 20 ++#define AR933X_UART_FIFO_SIZE 16 ++ ++#define AR933X_UART_DATA_REG 0x00 ++#define AR933X_UART_CS_REG 0x04 ++#define AR933X_UART_CLOCK_REG 0x08 ++#define AR933X_UART_INT_REG 0x0c ++#define AR933X_UART_INT_EN_REG 0x10 ++ ++#define AR933X_UART_DATA_TX_RX_MASK 0xff ++#define AR933X_UART_DATA_RX_CSR BIT(8) ++#define AR933X_UART_DATA_TX_CSR BIT(9) ++ ++#define AR933X_UART_CS_PARITY_S 0 ++#define AR933X_UART_CS_PARITY_M 0x3 ++#define AR933X_UART_CS_PARITY_NONE 0 ++#define AR933X_UART_CS_PARITY_ODD 1 ++#define AR933X_UART_CS_PARITY_EVEN 2 ++#define AR933X_UART_CS_IF_MODE_S 2 ++#define AR933X_UART_CS_IF_MODE_M 0x3 ++#define AR933X_UART_CS_IF_MODE_NONE 0 ++#define AR933X_UART_CS_IF_MODE_DTE 1 ++#define AR933X_UART_CS_IF_MODE_DCE 2 ++#define AR933X_UART_CS_FLOW_CTRL_S 4 ++#define AR933X_UART_CS_FLOW_CTRL_M 0x3 ++#define AR933X_UART_CS_DMA_EN BIT(6) ++#define AR933X_UART_CS_TX_READY_ORIDE BIT(7) ++#define AR933X_UART_CS_RX_READY_ORIDE BIT(8) ++#define AR933X_UART_CS_TX_READY BIT(9) ++#define AR933X_UART_CS_RX_BREAK BIT(10) ++#define AR933X_UART_CS_TX_BREAK BIT(11) ++#define AR933X_UART_CS_HOST_INT BIT(12) ++#define AR933X_UART_CS_HOST_INT_EN BIT(13) ++#define AR933X_UART_CS_TX_BUSY BIT(14) ++#define AR933X_UART_CS_RX_BUSY BIT(15) ++ ++#define AR933X_UART_CLOCK_STEP_M 0xffff ++#define AR933X_UART_CLOCK_SCALE_M 0xfff ++#define AR933X_UART_CLOCK_SCALE_S 16 ++#define AR933X_UART_CLOCK_STEP_M 0xffff ++ ++#define AR933X_UART_INT_RX_VALID BIT(0) ++#define AR933X_UART_INT_TX_READY BIT(1) ++#define AR933X_UART_INT_RX_FRAMING_ERR BIT(2) ++#define AR933X_UART_INT_RX_OFLOW_ERR BIT(3) ++#define AR933X_UART_INT_TX_OFLOW_ERR BIT(4) ++#define AR933X_UART_INT_RX_PARITY_ERR BIT(5) ++#define AR933X_UART_INT_RX_BREAK_ON BIT(6) ++#define AR933X_UART_INT_RX_BREAK_OFF BIT(7) ++#define AR933X_UART_INT_RX_FULL BIT(8) ++#define AR933X_UART_INT_TX_EMPTY BIT(9) ++#define AR933X_UART_INT_ALLINTS 0x3ff ++ ++#endif /* __AR933X_UART_H */ diff --git a/target/linux/ar71xx/patches-3.2/007-MIPS-ath79-add-AR933X-specific-clock-init.patch b/target/linux/ar71xx/patches-3.2/007-MIPS-ath79-add-AR933X-specific-clock-init.patch new file mode 100644 index 0000000000..0572fcd742 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/007-MIPS-ath79-add-AR933X-specific-clock-init.patch @@ -0,0 +1,148 @@ +From 29c8b2eef2011bf9392479487a51f6927892bfd6 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:04 +0200 +Subject: [PATCH 07/27] MIPS: ath79: add AR933X specific clock init + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2522/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/clock.c | 55 ++++++++++++++++++++++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 22 +++++++++ + arch/mips/include/asm/mach-ath79/ath79.h | 6 +++ + 3 files changed, 83 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -110,6 +110,59 @@ static void __init ar913x_clocks_init(vo + ath79_uart_clk.rate = ath79_ahb_clk.rate; + } + ++static void __init ar933x_clocks_init(void) ++{ ++ u32 clock_ctrl; ++ u32 cpu_config; ++ u32 freq; ++ u32 t; ++ ++ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if (t & AR933X_BOOTSTRAP_REF_CLK_40) ++ ath79_ref_clk.rate = (40 * 1000 * 1000); ++ else ++ ath79_ref_clk.rate = (25 * 1000 * 1000); ++ ++ clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG); ++ if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { ++ ath79_cpu_clk.rate = ath79_ref_clk.rate; ++ ath79_ahb_clk.rate = ath79_ref_clk.rate; ++ ath79_ddr_clk.rate = ath79_ref_clk.rate; ++ } else { ++ cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG); ++ ++ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) & ++ AR933X_PLL_CPU_CONFIG_REFDIV_MASK; ++ freq = ath79_ref_clk.rate / t; ++ ++ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) & ++ AR933X_PLL_CPU_CONFIG_NINT_MASK; ++ freq *= t; ++ ++ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & ++ AR933X_PLL_CPU_CONFIG_OUTDIV_MASK; ++ if (t == 0) ++ t = 1; ++ ++ freq >>= t; ++ ++ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) & ++ AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1; ++ ath79_cpu_clk.rate = freq / t; ++ ++ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) & ++ AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1; ++ ath79_ddr_clk.rate = freq / t; ++ ++ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) & ++ AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; ++ ath79_ahb_clk.rate = freq / t; ++ } ++ ++ ath79_wdt_clk.rate = ath79_ref_clk.rate; ++ ath79_uart_clk.rate = ath79_ref_clk.rate; ++} ++ + void __init ath79_clocks_init(void) + { + if (soc_is_ar71xx()) +@@ -118,6 +171,8 @@ void __init ath79_clocks_init(void) + ar724x_clocks_init(); + else if (soc_is_ar913x()) + ar913x_clocks_init(); ++ else if (soc_is_ar933x()) ++ ar933x_clocks_init(); + else + BUG(); + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -123,6 +123,24 @@ + #define AR913X_AHB_DIV_SHIFT 19 + #define AR913X_AHB_DIV_MASK 0x1 + ++#define AR933X_PLL_CPU_CONFIG_REG 0x00 ++#define AR933X_PLL_CLOCK_CTRL_REG 0x08 ++ ++#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 ++#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f ++#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 ++#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f ++#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 ++#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 ++ ++#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) ++#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 ++#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 ++#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 ++#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 ++#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 ++#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 ++ + /* + * USB_CONFIG block + */ +@@ -155,6 +173,8 @@ + + #define AR724X_RESET_REG_RESET_MODULE 0x1c + ++#define AR933X_RESET_REG_BOOTSTRAP 0xac ++ + #define MISC_INT_ETHSW BIT(12) + #define MISC_INT_TIMER4 BIT(10) + #define MISC_INT_TIMER3 BIT(9) +@@ -204,6 +224,8 @@ + #define AR913X_RESET_USB_HOST BIT(5) + #define AR913X_RESET_USB_PHY BIT(4) + ++#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) ++ + #define REV_ID_MAJOR_MASK 0xfff0 + #define REV_ID_MAJOR_AR71XX 0x00a0 + #define REV_ID_MAJOR_AR913X 0x00b0 +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -68,6 +68,12 @@ static inline int soc_is_ar913x(void) + ath79_soc == ATH79_SOC_AR9132); + } + ++static inline int soc_is_ar933x(void) ++{ ++ return (ath79_soc == ATH79_SOC_AR9330 || ++ ath79_soc == ATH79_SOC_AR9331); ++} ++ + extern void __iomem *ath79_ddr_base; + extern void __iomem *ath79_pll_base; + extern void __iomem *ath79_reset_base; diff --git a/target/linux/ar71xx/patches-3.2/008-MIPS-ath79-Add-AR933X-specific-glue-for-ath79_device.patch b/target/linux/ar71xx/patches-3.2/008-MIPS-ath79-Add-AR933X-specific-glue-for-ath79_device.patch new file mode 100644 index 0000000000..bb5bda18ed --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/008-MIPS-ath79-Add-AR933X-specific-glue-for-ath79_device.patch @@ -0,0 +1,46 @@ +From 00624e5d91c0e76f38730633eff51fc7630dd27b Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:05 +0200 +Subject: [PATCH 08/27] MIPS: ath79: Add AR933X specific glue for ath79_device_reset_{set,clear} + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2523/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/common.c | 4 ++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + + 2 files changed, 5 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -64,6 +64,8 @@ void ath79_device_reset_set(u32 mask) + reg = AR724X_RESET_REG_RESET_MODULE; + else if (soc_is_ar913x()) + reg = AR913X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar933x()) ++ reg = AR933X_RESET_REG_RESET_MODULE; + else + BUG(); + +@@ -86,6 +88,8 @@ void ath79_device_reset_clear(u32 mask) + reg = AR724X_RESET_REG_RESET_MODULE; + else if (soc_is_ar913x()) + reg = AR913X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar933x()) ++ reg = AR933X_RESET_REG_RESET_MODULE; + else + BUG(); + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -173,6 +173,7 @@ + + #define AR724X_RESET_REG_RESET_MODULE 0x1c + ++#define AR933X_RESET_REG_RESET_MODULE 0x1c + #define AR933X_RESET_REG_BOOTSTRAP 0xac + + #define MISC_INT_ETHSW BIT(12) diff --git a/target/linux/ar71xx/patches-3.2/009-MIPS-ath79-Add-AR933X-specific-IRQ-initialization.patch b/target/linux/ar71xx/patches-3.2/009-MIPS-ath79-Add-AR933X-specific-IRQ-initialization.patch new file mode 100644 index 0000000000..aad961e7d8 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/009-MIPS-ath79-Add-AR933X-specific-IRQ-initialization.patch @@ -0,0 +1,51 @@ +From f2963f6a811da75e2531fd1312aa124cd73f15d5 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:06 +0200 +Subject: [PATCH 09/27] MIPS: ath79: Add AR933X specific IRQ initialization + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2530/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/irq.c | 5 ++++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 5 +++++ + 2 files changed, 9 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -129,7 +129,7 @@ static void __init ath79_misc_irq_init(v + + if (soc_is_ar71xx() || soc_is_ar913x()) + ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; +- else if (soc_is_ar724x()) ++ else if (soc_is_ar724x() || soc_is_ar933x()) + ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; + else + BUG(); +@@ -186,6 +186,9 @@ void __init arch_init_irq(void) + } else if (soc_is_ar913x()) { + ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC; + ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB; ++ } else if (soc_is_ar933x()) { ++ ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC; ++ ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB; + } else + BUG(); + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -82,6 +82,11 @@ + #define AR913X_DDR_REG_FLUSH_USB 0x84 + #define AR913X_DDR_REG_FLUSH_WMAC 0x88 + ++#define AR933X_DDR_REG_FLUSH_GE0 0x7c ++#define AR933X_DDR_REG_FLUSH_GE1 0x80 ++#define AR933X_DDR_REG_FLUSH_USB 0x84 ++#define AR933X_DDR_REG_FLUSH_WMAC 0x88 ++ + /* + * PLL block + */ diff --git a/target/linux/ar71xx/patches-3.2/010-MIPS-ath79-add-AR933X-specific-GPIO-initialization.patch b/target/linux/ar71xx/patches-3.2/010-MIPS-ath79-add-AR933X-specific-GPIO-initialization.patch new file mode 100644 index 0000000000..400233c00c --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/010-MIPS-ath79-add-AR933X-specific-GPIO-initialization.patch @@ -0,0 +1,36 @@ +From e39670cd076caecfa75f5d97803a275dbd1ec4ab Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:07 +0200 +Subject: [PATCH 10/27] MIPS: ath79: add AR933X specific GPIO initialization + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2524/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/gpio.c | 2 ++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + + 2 files changed, 3 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -153,6 +153,8 @@ void __init ath79_gpio_init(void) + ath79_gpio_count = AR724X_GPIO_COUNT; + else if (soc_is_ar913x()) + ath79_gpio_count = AR913X_GPIO_COUNT; ++ else if (soc_is_ar933x()) ++ ath79_gpio_count = AR933X_GPIO_COUNT; + else + BUG(); + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -298,5 +298,6 @@ + #define AR71XX_GPIO_COUNT 16 + #define AR724X_GPIO_COUNT 18 + #define AR913X_GPIO_COUNT 22 ++#define AR933X_GPIO_COUNT 30 + + #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-3.2/011-MIPS-ath79-Add-config-symbol-for-the-AR933X-SoCs.patch b/target/linux/ar71xx/patches-3.2/011-MIPS-ath79-Add-config-symbol-for-the-AR933X-SoCs.patch new file mode 100644 index 0000000000..936236f8b0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/011-MIPS-ath79-Add-config-symbol-for-the-AR933X-SoCs.patch @@ -0,0 +1,27 @@ +From 7ab361d321763ef6296f35eb18ae05be8e28e64a Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:08 +0200 +Subject: [PATCH 11/27] MIPS: ath79: Add config symbol for the AR933X SoCs + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2525/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/Kconfig | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -41,6 +41,9 @@ config SOC_AR913X + select USB_ARCH_HAS_EHCI + def_bool n + ++config SOC_AR933X ++ def_bool n ++ + config ATH79_DEV_AR913X_WMAC + depends on SOC_AR913X + def_bool n diff --git a/target/linux/ar71xx/patches-3.2/012-USB-ehci-ath79-Add-device_id-entry-for-the-AR933X-So.patch b/target/linux/ar71xx/patches-3.2/012-USB-ehci-ath79-Add-device_id-entry-for-the-AR933X-So.patch new file mode 100644 index 0000000000..4afb971c60 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/012-USB-ehci-ath79-Add-device_id-entry-for-the-AR933X-So.patch @@ -0,0 +1,45 @@ +From 7191a2673adbddbbb5aea3489892119e698e77b6 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:09 +0200 +Subject: [PATCH 12/27] USB: ehci-ath79: Add device_id entry for the AR933X SoCs + +Also make the USB_EHCI_ATH79 selectable for the AR933X SoCs. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Cc: Greg Kroah-Hartman <gregkh@suse.de> +Cc: Alan Stern <stern@rowland.harvard.edu> +Cc: linux-usb@vger.kernel.org +Patchwork: https://patchwork.linux-mips.org/patch/2529/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + drivers/usb/host/Kconfig | 2 +- + drivers/usb/host/ehci-ath79.c | 4 ++++ + 2 files changed, 5 insertions(+), 1 deletions(-) + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -210,7 +210,7 @@ config USB_CNS3XXX_EHCI + + config USB_EHCI_ATH79 + bool "EHCI support for AR7XXX/AR9XXX SoCs" +- depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X) ++ depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) + select USB_EHCI_ROOT_HUB_TT + default y + ---help--- +--- a/drivers/usb/host/ehci-ath79.c ++++ b/drivers/usb/host/ehci-ath79.c +@@ -33,6 +33,10 @@ static const struct platform_device_id e + .driver_data = EHCI_ATH79_IP_V2, + }, + { ++ .name = "ar933x-ehci", ++ .driver_data = EHCI_ATH79_IP_V2, ++ }, ++ { + /* terminating entry */ + }, + }; diff --git a/target/linux/ar71xx/patches-3.2/013-MIPS-ath79-add-AR933X-specific-USB-platform-device-r.patch b/target/linux/ar71xx/patches-3.2/013-MIPS-ath79-add-AR933X-specific-USB-platform-device-r.patch new file mode 100644 index 0000000000..ae0a0981da --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/013-MIPS-ath79-add-AR933X-specific-USB-platform-device-r.patch @@ -0,0 +1,88 @@ +From 1355a27c85ae89225e738b9016656a406542ed1b Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 21:26:10 +0200 +Subject: [PATCH 13/27] MIPS: ath79: add AR933X specific USB platform device registration + +Also select the USB_ARCH_HAS_EHCI symbol in order to make the +EHCI driver available. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2527/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/Kconfig | 1 + + arch/mips/ath79/dev-usb.c | 19 +++++++++++++++++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 7 +++++++ + 3 files changed, 27 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -42,6 +42,7 @@ config SOC_AR913X + def_bool n + + config SOC_AR933X ++ select USB_ARCH_HAS_EHCI + def_bool n + + config ATH79_DEV_AR913X_WMAC +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -163,6 +163,23 @@ static void __init ar913x_usb_setup(void + platform_device_register(&ath79_ehci_device); + } + ++static void __init ar933x_usb_setup(void) ++{ ++ ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE); ++ mdelay(10); ++ ++ ath79_device_reset_clear(AR933X_RESET_USB_HOST); ++ mdelay(10); ++ ++ ath79_device_reset_clear(AR933X_RESET_USB_PHY); ++ mdelay(10); ++ ++ ath79_ehci_resources[0].start = AR933X_EHCI_BASE; ++ ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1; ++ ath79_ehci_device.name = "ar933x-ehci"; ++ platform_device_register(&ath79_ehci_device); ++} ++ + void __init ath79_register_usb(void) + { + if (soc_is_ar71xx()) +@@ -173,6 +190,8 @@ void __init ath79_register_usb(void) + ar724x_usb_setup(); + else if (soc_is_ar913x()) + ar913x_usb_setup(); ++ else if (soc_is_ar933x()) ++ ar933x_usb_setup(); + else + BUG(); + } +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -56,6 +56,9 @@ + #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) + #define AR933X_UART_SIZE 0x14 + ++#define AR933X_EHCI_BASE 0x1b000000 ++#define AR933X_EHCI_SIZE 0x1000 ++ + /* + * DDR_CTRL block + */ +@@ -230,6 +233,10 @@ + #define AR913X_RESET_USB_HOST BIT(5) + #define AR913X_RESET_USB_PHY BIT(4) + ++#define AR933X_RESET_USB_HOST BIT(5) ++#define AR933X_RESET_USB_PHY BIT(4) ++#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) ++ + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define REV_ID_MAJOR_MASK 0xfff0 diff --git a/target/linux/ar71xx/patches-3.2/014-SERIAL-AR933X-Add-driver-for-the-built-in-UART-of-th.patch b/target/linux/ar71xx/patches-3.2/014-SERIAL-AR933X-Add-driver-for-the-built-in-UART-of-th.patch new file mode 100644 index 0000000000..b4c51f150d --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/014-SERIAL-AR933X-Add-driver-for-the-built-in-UART-of-th.patch @@ -0,0 +1,789 @@ +From 1de387abd06fb67aaa8e27a48e378ffd9aaddd74 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 19:26:11 +0200 +Subject: [PATCH 14/27] SERIAL: AR933X: Add driver for the built-in UART of the SoC + +This patch adds the driver for the built-in UART of the +Atheros AR933X SoCs. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> +Cc: linux-serial@vger.kernel.org +Patchwork: https://patchwork.linux-mips.org/patch/2526/ +Signed-off-by: Alan Cox <alan@linux.intel.com> +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + .../include/asm/mach-ath79/ar933x_uart_platform.h | 18 + + drivers/tty/serial/Kconfig | 23 + + drivers/tty/serial/Makefile | 1 + + drivers/tty/serial/ar933x_uart.c | 688 ++++++++++++++++++++ + include/linux/serial_core.h | 4 + + 5 files changed, 734 insertions(+), 0 deletions(-) + create mode 100644 arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h + create mode 100644 drivers/tty/serial/ar933x_uart.c + +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h +@@ -0,0 +1,18 @@ ++/* ++ * Platform data definition for Atheros AR933X UART ++ * ++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR933X_UART_PLATFORM_H ++#define _AR933X_UART_PLATFORM_H ++ ++struct ar933x_uart_platform_data { ++ unsigned uartclk; ++}; ++ ++#endif /* _AR933X_UART_PLATFORM_H */ +--- a/drivers/tty/serial/Kconfig ++++ b/drivers/tty/serial/Kconfig +@@ -1610,4 +1610,27 @@ config SERIAL_XILINX_PS_UART_CONSOLE + help + Enable a Xilinx PS UART port to be the system console. + ++config SERIAL_AR933X ++ bool "AR933X serial port support" ++ depends on SOC_AR933X ++ select SERIAL_CORE ++ help ++ If you have an Atheros AR933X SOC based board and want to use the ++ built-in UART of the SoC, say Y to this option. ++ ++config SERIAL_AR933X_CONSOLE ++ bool "Console on AR933X serial port" ++ depends on SERIAL_AR933X=y ++ select SERIAL_CORE_CONSOLE ++ help ++ Enable a built-in UART port of the AR933X to be the system console. ++ ++config SERIAL_AR933X_NR_UARTS ++ int "Maximum number of AR933X serial ports" ++ depends on SERIAL_AR933X ++ default "2" ++ help ++ Set this to the number of serial ports you want the driver ++ to support. ++ + endmenu +--- a/drivers/tty/serial/Makefile ++++ b/drivers/tty/serial/Makefile +@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_ + obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o + obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o + obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o ++obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o +--- /dev/null ++++ b/drivers/tty/serial/ar933x_uart.c +@@ -0,0 +1,688 @@ ++/* ++ * Atheros AR933X SoC built-in UART driver ++ * ++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/module.h> ++#include <linux/ioport.h> ++#include <linux/init.h> ++#include <linux/console.h> ++#include <linux/sysrq.h> ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/serial_core.h> ++#include <linux/serial.h> ++#include <linux/slab.h> ++#include <linux/io.h> ++#include <linux/irq.h> ++ ++#include <asm/mach-ath79/ar933x_uart.h> ++#include <asm/mach-ath79/ar933x_uart_platform.h> ++ ++#define DRIVER_NAME "ar933x-uart" ++ ++#define AR933X_DUMMY_STATUS_RD 0x01 ++ ++static struct uart_driver ar933x_uart_driver; ++ ++struct ar933x_uart_port { ++ struct uart_port port; ++ unsigned int ier; /* shadow Interrupt Enable Register */ ++}; ++ ++static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, ++ int offset) ++{ ++ return readl(up->port.membase + offset); ++} ++ ++static inline void ar933x_uart_write(struct ar933x_uart_port *up, ++ int offset, unsigned int value) ++{ ++ writel(value, up->port.membase + offset); ++} ++ ++static inline void ar933x_uart_rmw(struct ar933x_uart_port *up, ++ unsigned int offset, ++ unsigned int mask, ++ unsigned int val) ++{ ++ unsigned int t; ++ ++ t = ar933x_uart_read(up, offset); ++ t &= ~mask; ++ t |= val; ++ ar933x_uart_write(up, offset, t); ++} ++ ++static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up, ++ unsigned int offset, ++ unsigned int val) ++{ ++ ar933x_uart_rmw(up, offset, 0, val); ++} ++ ++static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up, ++ unsigned int offset, ++ unsigned int val) ++{ ++ ar933x_uart_rmw(up, offset, val, 0); ++} ++ ++static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up) ++{ ++ up->ier |= AR933X_UART_INT_TX_EMPTY; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++} ++ ++static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up) ++{ ++ up->ier &= ~AR933X_UART_INT_TX_EMPTY; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++} ++ ++static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch) ++{ ++ unsigned int rdata; ++ ++ rdata = ch & AR933X_UART_DATA_TX_RX_MASK; ++ rdata |= AR933X_UART_DATA_TX_CSR; ++ ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata); ++} ++ ++static unsigned int ar933x_uart_tx_empty(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned long flags; ++ unsigned int rdata; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT; ++} ++ ++static unsigned int ar933x_uart_get_mctrl(struct uart_port *port) ++{ ++ return TIOCM_CAR; ++} ++ ++static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) ++{ ++} ++ ++static void ar933x_uart_start_tx(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ ar933x_uart_start_tx_interrupt(up); ++} ++ ++static void ar933x_uart_stop_tx(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ ar933x_uart_stop_tx_interrupt(up); ++} ++ ++static void ar933x_uart_stop_rx(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ up->ier &= ~AR933X_UART_INT_RX_VALID; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++} ++ ++static void ar933x_uart_break_ctl(struct uart_port *port, int break_state) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ if (break_state == -1) ++ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_TX_BREAK); ++ else ++ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_TX_BREAK); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++} ++ ++static void ar933x_uart_enable_ms(struct uart_port *port) ++{ ++} ++ ++static void ar933x_uart_set_termios(struct uart_port *port, ++ struct ktermios *new, ++ struct ktermios *old) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned int cs; ++ unsigned long flags; ++ unsigned int baud, scale; ++ ++ /* Only CS8 is supported */ ++ new->c_cflag &= ~CSIZE; ++ new->c_cflag |= CS8; ++ ++ /* Only one stop bit is supported */ ++ new->c_cflag &= ~CSTOPB; ++ ++ cs = 0; ++ if (new->c_cflag & PARENB) { ++ if (!(new->c_cflag & PARODD)) ++ cs |= AR933X_UART_CS_PARITY_EVEN; ++ else ++ cs |= AR933X_UART_CS_PARITY_ODD; ++ } else { ++ cs |= AR933X_UART_CS_PARITY_NONE; ++ } ++ ++ /* Mark/space parity is not supported */ ++ new->c_cflag &= ~CMSPAR; ++ ++ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); ++ scale = (port->uartclk / (16 * baud)) - 1; ++ ++ /* ++ * Ok, we're now changing the port state. Do it with ++ * interrupts disabled. ++ */ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ /* Update the per-port timeout. */ ++ uart_update_timeout(port, new->c_cflag, baud); ++ ++ up->port.ignore_status_mask = 0; ++ ++ /* ignore all characters if CREAD is not set */ ++ if ((new->c_cflag & CREAD) == 0) ++ up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD; ++ ++ ar933x_uart_write(up, AR933X_UART_CLOCK_REG, ++ scale << AR933X_UART_CLOCK_SCALE_S | 8192); ++ ++ /* setup configuration register */ ++ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs); ++ ++ /* enable host interrupt */ ++ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_HOST_INT_EN); ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ if (tty_termios_baud_rate(new)) ++ tty_termios_encode_baud_rate(new, baud, baud); ++} ++ ++static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) ++{ ++ struct tty_struct *tty; ++ int max_count = 256; ++ ++ tty = tty_port_tty_get(&up->port.state->port); ++ do { ++ unsigned int rdata; ++ unsigned char ch; ++ ++ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ if ((rdata & AR933X_UART_DATA_RX_CSR) == 0) ++ break; ++ ++ /* remove the character from the FIFO */ ++ ar933x_uart_write(up, AR933X_UART_DATA_REG, ++ AR933X_UART_DATA_RX_CSR); ++ ++ if (!tty) { ++ /* discard the data if no tty available */ ++ continue; ++ } ++ ++ up->port.icount.rx++; ++ ch = rdata & AR933X_UART_DATA_TX_RX_MASK; ++ ++ if (uart_handle_sysrq_char(&up->port, ch)) ++ continue; ++ ++ if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) ++ tty_insert_flip_char(tty, ch, TTY_NORMAL); ++ } while (max_count-- > 0); ++ ++ if (tty) { ++ tty_flip_buffer_push(tty); ++ tty_kref_put(tty); ++ } ++} ++ ++static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) ++{ ++ struct circ_buf *xmit = &up->port.state->xmit; ++ int count; ++ ++ if (uart_tx_stopped(&up->port)) ++ return; ++ ++ count = up->port.fifosize; ++ do { ++ unsigned int rdata; ++ ++ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) ++ break; ++ ++ if (up->port.x_char) { ++ ar933x_uart_putc(up, up->port.x_char); ++ up->port.icount.tx++; ++ up->port.x_char = 0; ++ continue; ++ } ++ ++ if (uart_circ_empty(xmit)) ++ break; ++ ++ ar933x_uart_putc(up, xmit->buf[xmit->tail]); ++ ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); ++ up->port.icount.tx++; ++ } while (--count > 0); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(&up->port); ++ ++ if (!uart_circ_empty(xmit)) ++ ar933x_uart_start_tx_interrupt(up); ++} ++ ++static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) ++{ ++ struct ar933x_uart_port *up = dev_id; ++ unsigned int status; ++ ++ status = ar933x_uart_read(up, AR933X_UART_CS_REG); ++ if ((status & AR933X_UART_CS_HOST_INT) == 0) ++ return IRQ_NONE; ++ ++ spin_lock(&up->port.lock); ++ ++ status = ar933x_uart_read(up, AR933X_UART_INT_REG); ++ status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG); ++ ++ if (status & AR933X_UART_INT_RX_VALID) { ++ ar933x_uart_write(up, AR933X_UART_INT_REG, ++ AR933X_UART_INT_RX_VALID); ++ ar933x_uart_rx_chars(up); ++ } ++ ++ if (status & AR933X_UART_INT_TX_EMPTY) { ++ ar933x_uart_write(up, AR933X_UART_INT_REG, ++ AR933X_UART_INT_TX_EMPTY); ++ ar933x_uart_stop_tx_interrupt(up); ++ ar933x_uart_tx_chars(up); ++ } ++ ++ spin_unlock(&up->port.lock); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ar933x_uart_startup(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned long flags; ++ int ret; ++ ++ ret = request_irq(up->port.irq, ar933x_uart_interrupt, ++ up->port.irqflags, dev_name(up->port.dev), up); ++ if (ret) ++ return ret; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ /* Enable HOST interrupts */ ++ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_HOST_INT_EN); ++ ++ /* Enable RX interrupts */ ++ up->ier = AR933X_UART_INT_RX_VALID; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ return 0; ++} ++ ++static void ar933x_uart_shutdown(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ /* Disable all interrupts */ ++ up->ier = 0; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++ ++ /* Disable break condition */ ++ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_TX_BREAK); ++ ++ free_irq(up->port.irq, up); ++} ++ ++static const char *ar933x_uart_type(struct uart_port *port) ++{ ++ return (port->type == PORT_AR933X) ? "AR933X UART" : NULL; ++} ++ ++static void ar933x_uart_release_port(struct uart_port *port) ++{ ++ /* Nothing to release ... */ ++} ++ ++static int ar933x_uart_request_port(struct uart_port *port) ++{ ++ /* UARTs always present */ ++ return 0; ++} ++ ++static void ar933x_uart_config_port(struct uart_port *port, int flags) ++{ ++ if (flags & UART_CONFIG_TYPE) ++ port->type = PORT_AR933X; ++} ++ ++static int ar933x_uart_verify_port(struct uart_port *port, ++ struct serial_struct *ser) ++{ ++ if (ser->type != PORT_UNKNOWN && ++ ser->type != PORT_AR933X) ++ return -EINVAL; ++ ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ return -EINVAL; ++ ++ if (ser->baud_base < 28800) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static struct uart_ops ar933x_uart_ops = { ++ .tx_empty = ar933x_uart_tx_empty, ++ .set_mctrl = ar933x_uart_set_mctrl, ++ .get_mctrl = ar933x_uart_get_mctrl, ++ .stop_tx = ar933x_uart_stop_tx, ++ .start_tx = ar933x_uart_start_tx, ++ .stop_rx = ar933x_uart_stop_rx, ++ .enable_ms = ar933x_uart_enable_ms, ++ .break_ctl = ar933x_uart_break_ctl, ++ .startup = ar933x_uart_startup, ++ .shutdown = ar933x_uart_shutdown, ++ .set_termios = ar933x_uart_set_termios, ++ .type = ar933x_uart_type, ++ .release_port = ar933x_uart_release_port, ++ .request_port = ar933x_uart_request_port, ++ .config_port = ar933x_uart_config_port, ++ .verify_port = ar933x_uart_verify_port, ++}; ++ ++#ifdef CONFIG_SERIAL_AR933X_CONSOLE ++ ++static struct ar933x_uart_port * ++ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; ++ ++static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up) ++{ ++ unsigned int status; ++ unsigned int timeout = 60000; ++ ++ /* Wait up to 60ms for the character(s) to be sent. */ ++ do { ++ status = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ if (--timeout == 0) ++ break; ++ udelay(1); ++ } while ((status & AR933X_UART_DATA_TX_CSR) == 0); ++} ++ ++static void ar933x_uart_console_putchar(struct uart_port *port, int ch) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ ar933x_uart_wait_xmitr(up); ++ ar933x_uart_putc(up, ch); ++} ++ ++static void ar933x_uart_console_write(struct console *co, const char *s, ++ unsigned int count) ++{ ++ struct ar933x_uart_port *up = ar933x_console_ports[co->index]; ++ unsigned long flags; ++ unsigned int int_en; ++ int locked = 1; ++ ++ local_irq_save(flags); ++ ++ if (up->port.sysrq) ++ locked = 0; ++ else if (oops_in_progress) ++ locked = spin_trylock(&up->port.lock); ++ else ++ spin_lock(&up->port.lock); ++ ++ /* ++ * First save the IER then disable the interrupts ++ */ ++ int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG); ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0); ++ ++ uart_console_write(&up->port, s, count, ar933x_uart_console_putchar); ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IER ++ */ ++ ar933x_uart_wait_xmitr(up); ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en); ++ ++ ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS); ++ ++ if (locked) ++ spin_unlock(&up->port.lock); ++ ++ local_irq_restore(flags); ++} ++ ++static int ar933x_uart_console_setup(struct console *co, char *options) ++{ ++ struct ar933x_uart_port *up; ++ int baud = 115200; ++ int bits = 8; ++ int parity = 'n'; ++ int flow = 'n'; ++ ++ if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS) ++ return -EINVAL; ++ ++ up = ar933x_console_ports[co->index]; ++ if (!up) ++ return -ENODEV; ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ ++ return uart_set_options(&up->port, co, baud, parity, bits, flow); ++} ++ ++static struct console ar933x_uart_console = { ++ .name = "ttyATH", ++ .write = ar933x_uart_console_write, ++ .device = uart_console_device, ++ .setup = ar933x_uart_console_setup, ++ .flags = CON_PRINTBUFFER, ++ .index = -1, ++ .data = &ar933x_uart_driver, ++}; ++ ++static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) ++{ ++ ar933x_console_ports[up->port.line] = up; ++} ++ ++#define AR933X_SERIAL_CONSOLE (&ar933x_uart_console) ++ ++#else ++ ++static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {} ++ ++#define AR933X_SERIAL_CONSOLE NULL ++ ++#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ ++ ++static struct uart_driver ar933x_uart_driver = { ++ .owner = THIS_MODULE, ++ .driver_name = DRIVER_NAME, ++ .dev_name = "ttyATH", ++ .nr = CONFIG_SERIAL_AR933X_NR_UARTS, ++ .cons = AR933X_SERIAL_CONSOLE, ++}; ++ ++static int __devinit ar933x_uart_probe(struct platform_device *pdev) ++{ ++ struct ar933x_uart_platform_data *pdata; ++ struct ar933x_uart_port *up; ++ struct uart_port *port; ++ struct resource *mem_res; ++ struct resource *irq_res; ++ int id; ++ int ret; ++ ++ pdata = pdev->dev.platform_data; ++ if (!pdata) ++ return -EINVAL; ++ ++ id = pdev->id; ++ if (id == -1) ++ id = 0; ++ ++ if (id > CONFIG_SERIAL_AR933X_NR_UARTS) ++ return -EINVAL; ++ ++ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!mem_res) { ++ dev_err(&pdev->dev, "no MEM resource\n"); ++ return -EINVAL; ++ } ++ ++ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!irq_res) { ++ dev_err(&pdev->dev, "no IRQ resource\n"); ++ return -EINVAL; ++ } ++ ++ up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL); ++ if (!up) ++ return -ENOMEM; ++ ++ port = &up->port; ++ port->mapbase = mem_res->start; ++ ++ port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE); ++ if (!port->membase) { ++ ret = -ENOMEM; ++ goto err_free_up; ++ } ++ ++ port->line = id; ++ port->irq = irq_res->start; ++ port->dev = &pdev->dev; ++ port->type = PORT_AR933X; ++ port->iotype = UPIO_MEM32; ++ port->uartclk = pdata->uartclk; ++ ++ port->regshift = 2; ++ port->fifosize = AR933X_UART_FIFO_SIZE; ++ port->ops = &ar933x_uart_ops; ++ ++ ar933x_uart_add_console_port(up); ++ ++ ret = uart_add_one_port(&ar933x_uart_driver, &up->port); ++ if (ret) ++ goto err_unmap; ++ ++ platform_set_drvdata(pdev, up); ++ return 0; ++ ++err_unmap: ++ iounmap(up->port.membase); ++err_free_up: ++ kfree(up); ++ return ret; ++} ++ ++static int __devexit ar933x_uart_remove(struct platform_device *pdev) ++{ ++ struct ar933x_uart_port *up; ++ ++ up = platform_get_drvdata(pdev); ++ platform_set_drvdata(pdev, NULL); ++ ++ if (up) { ++ uart_remove_one_port(&ar933x_uart_driver, &up->port); ++ iounmap(up->port.membase); ++ kfree(up); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver ar933x_uart_platform_driver = { ++ .probe = ar933x_uart_probe, ++ .remove = __devexit_p(ar933x_uart_remove), ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ar933x_uart_init(void) ++{ ++ int ret; ++ ++ ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS; ++ ret = uart_register_driver(&ar933x_uart_driver); ++ if (ret) ++ goto err_out; ++ ++ ret = platform_driver_register(&ar933x_uart_platform_driver); ++ if (ret) ++ goto err_unregister_uart_driver; ++ ++ return 0; ++ ++err_unregister_uart_driver: ++ uart_unregister_driver(&ar933x_uart_driver); ++err_out: ++ return ret; ++} ++ ++static void __exit ar933x_uart_exit(void) ++{ ++ platform_driver_unregister(&ar933x_uart_platform_driver); ++ uart_unregister_driver(&ar933x_uart_driver); ++} ++ ++module_init(ar933x_uart_init); ++module_exit(ar933x_uart_exit); ++ ++MODULE_DESCRIPTION("Atheros AR933X UART driver"); ++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" DRIVER_NAME); +--- a/include/linux/serial_core.h ++++ b/include/linux/serial_core.h +@@ -207,6 +207,10 @@ + /* Xilinx PSS UART */ + #define PORT_XUARTPS 98 + ++/* Atheros AR933X SoC */ ++#define PORT_AR933X 99 ++ ++ + #ifdef __KERNEL__ + + #include <linux/compiler.h> diff --git a/target/linux/ar71xx/patches-3.2/015-MIPS-ath79-register-UART-device-for-the-AR933X-SoCs.patch b/target/linux/ar71xx/patches-3.2/015-MIPS-ath79-register-UART-device-for-the-AR933X-SoCs.patch new file mode 100644 index 0000000000..8a36c9845e --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/015-MIPS-ath79-register-UART-device-for-the-AR933X-SoCs.patch @@ -0,0 +1,80 @@ +From d9215f4c69b414f589eeeff002af7ef58b96b172 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 19:26:12 +0200 +Subject: [PATCH 15/27] MIPS: ath79: register UART device for the AR933X SoCs + +The AR933X SoCs does not have a 8250 compatible UART, they +are using a different UART core. Register a different platform +device for the different UART. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2528/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/dev-common.c | 38 ++++++++++++++++++++++++++++++++++++-- + 1 files changed, 36 insertions(+), 2 deletions(-) + +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -20,6 +20,7 @@ + + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ar933x_uart_platform.h> + #include "common.h" + #include "dev-common.h" + +@@ -54,6 +55,30 @@ static struct platform_device ath79_uart + }, + }; + ++static struct resource ar933x_uart_resources[] = { ++ { ++ .start = AR933X_UART_BASE, ++ .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = ATH79_MISC_IRQ_UART, ++ .end = ATH79_MISC_IRQ_UART, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct ar933x_uart_platform_data ar933x_uart_data; ++static struct platform_device ar933x_uart_device = { ++ .name = "ar933x-uart", ++ .id = -1, ++ .resource = ar933x_uart_resources, ++ .num_resources = ARRAY_SIZE(ar933x_uart_resources), ++ .dev = { ++ .platform_data = &ar933x_uart_data, ++ }, ++}; ++ + void __init ath79_register_uart(void) + { + struct clk *clk; +@@ -62,8 +87,17 @@ void __init ath79_register_uart(void) + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + +- ath79_uart_data[0].uartclk = clk_get_rate(clk); +- platform_device_register(&ath79_uart_device); ++ if (soc_is_ar71xx() || ++ soc_is_ar724x() || ++ soc_is_ar913x()) { ++ ath79_uart_data[0].uartclk = clk_get_rate(clk); ++ platform_device_register(&ath79_uart_device); ++ } else if (soc_is_ar933x()) { ++ ar933x_uart_data.uartclk = clk_get_rate(clk); ++ platform_device_register(&ar933x_uart_device); ++ } else { ++ BUG(); ++ } + } + + static struct platform_device ath79_wdt_device = { diff --git a/target/linux/ar71xx/patches-3.2/016-MIPS-ath79-Add-initial-support-for-the-Atheros-AP121.patch b/target/linux/ar71xx/patches-3.2/016-MIPS-ath79-Add-initial-support-for-the-Atheros-AP121.patch new file mode 100644 index 0000000000..5e6ba07560 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/016-MIPS-ath79-Add-initial-support-for-the-Atheros-AP121.patch @@ -0,0 +1,149 @@ +From d7b27740e8376c1c147297b526f9a8e330c1fe17 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 20 Jun 2011 19:26:13 +0200 +Subject: [PATCH 16/27] MIPS: ath79: Add initial support for the Atheros AP121 reference board + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: Kathy Giori <kgiori@qca.qualcomm.com> +Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> +Patchwork: https://patchwork.linux-mips.org/patch/2531/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/Kconfig | 11 +++++ + arch/mips/ath79/Makefile | 1 + + arch/mips/ath79/mach-ap121.c | 88 ++++++++++++++++++++++++++++++++++++++++++ + arch/mips/ath79/machtypes.h | 1 + + 4 files changed, 101 insertions(+), 0 deletions(-) + create mode 100644 arch/mips/ath79/mach-ap121.c + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -2,6 +2,17 @@ if ATH79 + + menu "Atheros AR71XX/AR724X/AR913X machine selection" + ++config ATH79_MACH_AP121 ++ bool "Atheros AP121 reference board" ++ select SOC_AR933X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ select ATH79_DEV_USB ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros AP121 reference board. ++ + config ATH79_MACH_AP81 + bool "Atheros AP81 reference board" + select SOC_AR913X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -25,5 +25,6 @@ obj-$(CONFIG_ATH79_DEV_USB) += dev-usb. + # + # Machines + # ++obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o + obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o + obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o +--- /dev/null ++++ b/arch/mips/ath79/mach-ap121.c +@@ -0,0 +1,88 @@ ++/* ++ * Atheros AP121 board support ++ * ++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include "machtypes.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-spi.h" ++#include "dev-usb.h" ++ ++#define AP121_GPIO_LED_WLAN 0 ++#define AP121_GPIO_LED_USB 1 ++ ++#define AP121_GPIO_BTN_JUMPSTART 11 ++#define AP121_GPIO_BTN_RESET 12 ++ ++#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) ++ ++#define AP121_CAL_DATA_ADDR 0x1fff1000 ++ ++static struct gpio_led ap121_leds_gpio[] __initdata = { ++ { ++ .name = "ap121:green:usb", ++ .gpio = AP121_GPIO_LED_USB, ++ .active_low = 0, ++ }, ++ { ++ .name = "ap121:green:wlan", ++ .gpio = AP121_GPIO_LED_WLAN, ++ .active_low = 0, ++ }, ++}; ++ ++static struct gpio_keys_button ap121_gpio_keys[] __initdata = { ++ { ++ .desc = "jumpstart button", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_GPIO_BTN_JUMPSTART, ++ .active_low = 1, ++ }, ++ { ++ .desc = "reset button", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_GPIO_BTN_RESET, ++ .active_low = 1, ++ } ++}; ++ ++static struct spi_board_info ap121_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "mx25l1606e", ++ } ++}; ++ ++static struct ath79_spi_platform_data ap121_spi_data = { ++ .bus_num = 0, ++ .num_chipselect = 1, ++}; ++ ++static void __init ap121_setup(void) ++{ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), ++ ap121_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap121_gpio_keys), ++ ap121_gpio_keys); ++ ++ ath79_register_spi(&ap121_spi_data, ap121_spi_info, ++ ARRAY_SIZE(ap121_spi_info)); ++ ath79_register_usb(); ++} ++ ++MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", ++ ap121_setup); +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -16,6 +16,7 @@ + + enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, ++ ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ + }; diff --git a/target/linux/ar71xx/patches-3.2/017-MIPS-Initial-PCI-support-for-Atheros-724x-SoCs.patch b/target/linux/ar71xx/patches-3.2/017-MIPS-Initial-PCI-support-for-Atheros-724x-SoCs.patch new file mode 100644 index 0000000000..1959e64eac --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/017-MIPS-Initial-PCI-support-for-Atheros-724x-SoCs.patch @@ -0,0 +1,231 @@ +From 958e444a5a7750c407ed0c90af28f74295478e99 Mon Sep 17 00:00:00 2001 +From: Rene Bolldorf <xsecute@googlemail.com> +Date: Thu, 17 Nov 2011 14:25:09 +0000 +Subject: [PATCH 17/27] MIPS: Initial PCI support for Atheros 724x SoCs. + +[ralf@linux-mips.org: Fixed the odd formatting of all break statements.] + +Signed-off-by: Rene Bolldorf <xsecute@googlemail.com> +Cc: linux-mips@linux-mips.org +Cc: linux-kernel@vger.kernel.org +Patchwork: https://patchwork.linux-mips.org/patch/3019/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/include/asm/mach-ath79/pci-ath724x.h | 21 +++ + arch/mips/pci/Makefile | 1 + + arch/mips/pci/pci-ath724x.c | 174 ++++++++++++++++++++++++ + 3 files changed, 196 insertions(+), 0 deletions(-) + create mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h + create mode 100644 arch/mips/pci/pci-ath724x.c + +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/pci-ath724x.h +@@ -0,0 +1,21 @@ ++/* ++ * Atheros 724x PCI support ++ * ++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H ++#define __ASM_MACH_ATH79_PCI_ATH724X_H ++ ++struct ath724x_pci_data { ++ int irq; ++ void *pdata; ++}; ++ ++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size); ++ ++#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o + obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o ++obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o + + # + # These are still pretty much in the old state, watch, go blind. +--- /dev/null ++++ b/arch/mips/pci/pci-ath724x.c +@@ -0,0 +1,174 @@ ++/* ++ * Atheros 724x PCI support ++ * ++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/pci.h> ++#include <asm/mach-ath79/pci-ath724x.h> ++ ++#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) ++#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) ++ ++#define ATH724X_PCI_DEV_BASE 0x14000000 ++#define ATH724X_PCI_MEM_BASE 0x10000000 ++#define ATH724X_PCI_MEM_SIZE 0x08000000 ++ ++static DEFINE_SPINLOCK(ath724x_pci_lock); ++static struct ath724x_pci_data *pci_data; ++static int pci_data_size; ++ ++static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, uint32_t *value) ++{ ++ unsigned long flags, addr, tval, mask; ++ ++ if (devfn) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ if (where & (size - 1)) ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ ++ spin_lock_irqsave(&ath724x_pci_lock, flags); ++ ++ switch (size) { ++ case 1: ++ addr = where & ~3; ++ mask = 0xff000000 >> ((where % 4) * 8); ++ tval = reg_read(ATH724X_PCI_DEV_BASE + addr); ++ tval = tval & ~mask; ++ *value = (tval >> ((4 - (where % 4))*8)); ++ break; ++ case 2: ++ addr = where & ~3; ++ mask = 0xffff0000 >> ((where % 4)*8); ++ tval = reg_read(ATH724X_PCI_DEV_BASE + addr); ++ tval = tval & ~mask; ++ *value = (tval >> ((4 - (where % 4))*8)); ++ break; ++ case 4: ++ *value = reg_read(ATH724X_PCI_DEV_BASE + where); ++ break; ++ default: ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ } ++ ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, uint32_t value) ++{ ++ unsigned long flags, tval, addr, mask; ++ ++ if (devfn) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ if (where & (size - 1)) ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ ++ spin_lock_irqsave(&ath724x_pci_lock, flags); ++ ++ switch (size) { ++ case 1: ++ addr = (ATH724X_PCI_DEV_BASE + where) & ~3; ++ mask = 0xff000000 >> ((where % 4)*8); ++ tval = reg_read(addr); ++ tval = tval & ~mask; ++ tval |= (value << ((4 - (where % 4))*8)) & mask; ++ reg_write(addr, tval); ++ break; ++ case 2: ++ addr = (ATH724X_PCI_DEV_BASE + where) & ~3; ++ mask = 0xffff0000 >> ((where % 4)*8); ++ tval = reg_read(addr); ++ tval = tval & ~mask; ++ tval |= (value << ((4 - (where % 4))*8)) & mask; ++ reg_write(addr, tval); ++ break; ++ case 4: ++ reg_write((ATH724X_PCI_DEV_BASE + where), value); ++ break; ++ default: ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ } ++ ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static struct pci_ops ath724x_pci_ops = { ++ .read = ath724x_pci_read, ++ .write = ath724x_pci_write, ++}; ++ ++static struct resource ath724x_io_resource = { ++ .name = "PCI IO space", ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct resource ath724x_mem_resource = { ++ .name = "PCI memory space", ++ .start = ATH724X_PCI_MEM_BASE, ++ .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct pci_controller ath724x_pci_controller = { ++ .pci_ops = &ath724x_pci_ops, ++ .io_resource = &ath724x_io_resource, ++ .mem_resource = &ath724x_mem_resource, ++}; ++ ++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size) ++{ ++ pci_data = data; ++ pci_data_size = size; ++} ++ ++int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) ++{ ++ unsigned int devfn = dev->devfn; ++ int irq = -1; ++ ++ if (devfn > pci_data_size - 1) ++ return irq; ++ ++ irq = pci_data[devfn].irq; ++ ++ return irq; ++} ++ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ unsigned int devfn = dev->devfn; ++ ++ if (devfn > pci_data_size - 1) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ dev->dev.platform_data = pci_data[devfn].pdata; ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int __init ath724x_pcibios_init(void) ++{ ++ register_pci_controller(&ath724x_pci_controller); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++arch_initcall(ath724x_pcibios_init); diff --git a/target/linux/ar71xx/patches-3.2/018-Initial-support-for-the-Ubiquiti-Networks-XM-board-r.patch b/target/linux/ar71xx/patches-3.2/018-Initial-support-for-the-Ubiquiti-Networks-XM-board-r.patch new file mode 100644 index 0000000000..466a5372d9 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/018-Initial-support-for-the-Ubiquiti-Networks-XM-board-r.patch @@ -0,0 +1,184 @@ +From e6a1210bef8b48a946f1afb6d951f4b2448219ac Mon Sep 17 00:00:00 2001 +From: Rene Bolldorf <xsecute@googlemail.com> +Date: Fri, 18 Nov 2011 00:17:42 +0000 +Subject: [PATCH 18/27] Initial support for the Ubiquiti Networks XM board (rev 1.0). + +Signed-off-by: Rene Bolldorf <xsecute@googlemail.com> +Cc: linux-mips@linux-mips.org +Cc: linux-kernel@vger.kernel.org +Patchwork: https://patchwork.linux-mips.org/patch/3020/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/Kconfig | 11 ++++ + arch/mips/ath79/Makefile | 1 + + arch/mips/ath79/mach-ubnt-xm.c | 119 ++++++++++++++++++++++++++++++++++++++++ + arch/mips/ath79/machtypes.h | 1 + + 4 files changed, 132 insertions(+), 0 deletions(-) + create mode 100644 arch/mips/ath79/mach-ubnt-xm.c + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -36,6 +36,16 @@ config ATH79_MACH_PB44 + Say 'Y' here if you want your kernel to support the + Atheros PB44 reference board. + ++config ATH79_MACH_UBNT_XM ++ bool "Ubiquiti Networks XM (rev 1.0) board" ++ select SOC_AR724X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ help ++ Say 'Y' here if you want your kernel to support the ++ Ubiquiti Networks XM (rev 1.0) board. ++ + endmenu + + config SOC_AR71XX +@@ -46,6 +56,7 @@ config SOC_AR71XX + config SOC_AR724X + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI ++ select HW_HAS_PCI + def_bool n + + config SOC_AR913X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -28,3 +28,4 @@ obj-$(CONFIG_ATH79_DEV_USB) += dev-usb. + obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o + obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o + obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o ++obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o +--- /dev/null ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -0,0 +1,119 @@ ++/* ++ * Ubiquiti Networks XM (rev 1.0) board support ++ * ++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * ++ * Derived from: mach-pb44.c ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/pci.h> ++ ++#ifdef CONFIG_PCI ++#include <linux/ath9k_platform.h> ++#include <asm/mach-ath79/pci-ath724x.h> ++#endif /* CONFIG_PCI */ ++ ++#include "machtypes.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-spi.h" ++ ++#define UBNT_XM_GPIO_LED_L1 0 ++#define UBNT_XM_GPIO_LED_L2 1 ++#define UBNT_XM_GPIO_LED_L3 11 ++#define UBNT_XM_GPIO_LED_L4 7 ++ ++#define UBNT_XM_GPIO_BTN_RESET 12 ++ ++#define UBNT_XM_KEYS_POLL_INTERVAL 20 ++#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) ++ ++#define UBNT_XM_PCI_IRQ 48 ++#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) ++ ++static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt-xm:red:link1", ++ .gpio = UBNT_XM_GPIO_LED_L1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt-xm:orange:link2", ++ .gpio = UBNT_XM_GPIO_LED_L2, ++ .active_low = 0, ++ }, { ++ .name = "ubnt-xm:green:link3", ++ .gpio = UBNT_XM_GPIO_LED_L3, ++ .active_low = 0, ++ }, { ++ .name = "ubnt-xm:green:link4", ++ .gpio = UBNT_XM_GPIO_LED_L4, ++ .active_low = 0, ++ }, ++}; ++ ++static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = UBNT_XM_GPIO_BTN_RESET, ++ .active_low = 1, ++ } ++}; ++ ++static struct spi_board_info ubnt_xm_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "mx25l6405d", ++ } ++}; ++ ++static struct ath79_spi_platform_data ubnt_xm_spi_data = { ++ .bus_num = 0, ++ .num_chipselect = 1, ++}; ++ ++#ifdef CONFIG_PCI ++static struct ath9k_platform_data ubnt_xm_eeprom_data; ++ ++static struct ath724x_pci_data ubnt_xm_pci_data[] = { ++ { ++ .irq = UBNT_XM_PCI_IRQ, ++ .pdata = &ubnt_xm_eeprom_data, ++ }, ++}; ++#endif /* CONFIG_PCI */ ++ ++static void __init ubnt_xm_init(void) ++{ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), ++ ubnt_xm_leds_gpio); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++ ++ ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, ++ ARRAY_SIZE(ubnt_xm_spi_info)); ++ ++#ifdef CONFIG_PCI ++ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, ++ sizeof(ubnt_xm_eeprom_data.eeprom_data)); ++ ++ ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); ++#endif /* CONFIG_PCI */ ++ ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_XM, ++ "UBNT-XM", ++ "Ubiquiti Networks XM (rev 1.0) board", ++ ubnt_xm_init); +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -19,6 +19,7 @@ enum ath79_mach_type { + ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ + }; + + #endif /* _ATH79_MACHTYPE_H */ diff --git a/target/linux/ar71xx/patches-3.2/019-MIPS-ath79-Store-the-SoC-revision-in-a-global-variab.patch b/target/linux/ar71xx/patches-3.2/019-MIPS-ath79-Store-the-SoC-revision-in-a-global-variab.patch new file mode 100644 index 0000000000..f7716bc1f3 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/019-MIPS-ath79-Store-the-SoC-revision-in-a-global-variab.patch @@ -0,0 +1,51 @@ +From d3cdd75072bc5df5b18dcafb45cbe9a3a62b840b Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:46 +0000 +Subject: [PATCH 19/27] MIPS: ath79: Store the SoC revision in a global variable + +Knowing the exact revision of the SoC is required to make runtime decisions +in various code paths. We have determined the SoC revision already, so we +only need to store that in a global variable. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3027/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/common.c | 1 + + arch/mips/ath79/setup.c | 2 ++ + arch/mips/include/asm/mach-ath79/ath79.h | 1 + + 3 files changed, 4 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -30,6 +30,7 @@ u32 ath79_ddr_freq; + EXPORT_SYMBOL_GPL(ath79_ddr_freq); + + enum ath79_soc_type ath79_soc; ++unsigned int ath79_soc_rev; + + void __iomem *ath79_pll_base; + void __iomem *ath79_reset_base; +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -149,6 +149,8 @@ static void __init ath79_detect_sys_type + panic("ath79: unknown SoC, id:0x%08x\n", id); + } + ++ ath79_soc_rev = rev; ++ + sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); + pr_info("SoC: %s\n", ath79_sys_type); + } +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -32,6 +32,7 @@ enum ath79_soc_type { + }; + + extern enum ath79_soc_type ath79_soc; ++extern unsigned int ath79_soc_rev; + + static inline int soc_is_ar71xx(void) + { diff --git a/target/linux/ar71xx/patches-3.2/020-MIPS-ath79-Remove-ar913x-from-common-variable-and-fu.patch b/target/linux/ar71xx/patches-3.2/020-MIPS-ath79-Remove-ar913x-from-common-variable-and-fu.patch new file mode 100644 index 0000000000..1725764117 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/020-MIPS-ath79-Remove-ar913x-from-common-variable-and-fu.patch @@ -0,0 +1,97 @@ +From cc2140939233382c1e58abc1d0a1b88fdd6215e6 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:53 +0000 +Subject: [PATCH 20/27] MIPS: ath79: Remove 'ar913x' from common variable and function names + +The wireless MAC specific variables and the registration code can be shared +between multiple SoCs. Remove the 'ar913x' part from the function and +variable names to avoid confusions. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3028/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/dev-ar913x-wmac.c | 20 ++++++++++---------- + arch/mips/ath79/dev-ar913x-wmac.h | 8 ++++---- + arch/mips/ath79/mach-ap81.c | 2 +- + 3 files changed, 15 insertions(+), 15 deletions(-) + +--- a/arch/mips/ath79/dev-ar913x-wmac.c ++++ b/arch/mips/ath79/dev-ar913x-wmac.c +@@ -19,9 +19,9 @@ + #include <asm/mach-ath79/ar71xx_regs.h> + #include "dev-ar913x-wmac.h" + +-static struct ath9k_platform_data ar913x_wmac_data; ++static struct ath9k_platform_data ath79_wmac_data; + +-static struct resource ar913x_wmac_resources[] = { ++static struct resource ath79_wmac_resources[] = { + { + .start = AR913X_WMAC_BASE, + .end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1, +@@ -33,21 +33,21 @@ static struct resource ar913x_wmac_resou + }, + }; + +-static struct platform_device ar913x_wmac_device = { ++static struct platform_device ath79_wmac_device = { + .name = "ath9k", + .id = -1, +- .resource = ar913x_wmac_resources, +- .num_resources = ARRAY_SIZE(ar913x_wmac_resources), ++ .resource = ath79_wmac_resources, ++ .num_resources = ARRAY_SIZE(ath79_wmac_resources), + .dev = { +- .platform_data = &ar913x_wmac_data, ++ .platform_data = &ath79_wmac_data, + }, + }; + +-void __init ath79_register_ar913x_wmac(u8 *cal_data) ++void __init ath79_register_wmac(u8 *cal_data) + { + if (cal_data) +- memcpy(ar913x_wmac_data.eeprom_data, cal_data, +- sizeof(ar913x_wmac_data.eeprom_data)); ++ memcpy(ath79_wmac_data.eeprom_data, cal_data, ++ sizeof(ath79_wmac_data.eeprom_data)); + + /* reset the WMAC */ + ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); +@@ -56,5 +56,5 @@ void __init ath79_register_ar913x_wmac(u + ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); + mdelay(10); + +- platform_device_register(&ar913x_wmac_device); ++ platform_device_register(&ath79_wmac_device); + } +--- a/arch/mips/ath79/dev-ar913x-wmac.h ++++ b/arch/mips/ath79/dev-ar913x-wmac.h +@@ -9,9 +9,9 @@ + * by the Free Software Foundation. + */ + +-#ifndef _ATH79_DEV_AR913X_WMAC_H +-#define _ATH79_DEV_AR913X_WMAC_H ++#ifndef _ATH79_DEV_WMAC_H ++#define _ATH79_DEV_WMAC_H + +-void ath79_register_ar913x_wmac(u8 *cal_data); ++void ath79_register_wmac(u8 *cal_data); + +-#endif /* _ATH79_DEV_AR913X_WMAC_H */ ++#endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -92,7 +92,7 @@ static void __init ap81_setup(void) + ap81_gpio_keys); + ath79_register_spi(&ap81_spi_data, ap81_spi_info, + ARRAY_SIZE(ap81_spi_info)); +- ath79_register_ar913x_wmac(cal_data); ++ ath79_register_wmac(cal_data); + ath79_register_usb(); + } + diff --git a/target/linux/ar71xx/patches-3.2/021-MIPS-ath79-Separate-AR913x-SoC-specific-WMAC-setup-c.patch b/target/linux/ar71xx/patches-3.2/021-MIPS-ath79-Separate-AR913x-SoC-specific-WMAC-setup-c.patch new file mode 100644 index 0000000000..a866eb5292 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/021-MIPS-ath79-Separate-AR913x-SoC-specific-WMAC-setup-c.patch @@ -0,0 +1,65 @@ +From 6e3f244874b8ae660136531b696ad05abe549607 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:53 +0000 +Subject: [PATCH 21/27] MIPS: ath79: Separate AR913x SoC specific WMAC setup code + +The device registration code can be shared between the different SoCs, but +the required setup code varies Move AR913x specific setup code into a +separate function in order to make adding support for another SoCs easier. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3029/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/dev-ar913x-wmac.c | 24 +++++++++++++++++------- + 1 files changed, 17 insertions(+), 7 deletions(-) + +--- a/arch/mips/ath79/dev-ar913x-wmac.c ++++ b/arch/mips/ath79/dev-ar913x-wmac.c +@@ -23,8 +23,7 @@ static struct ath9k_platform_data ath79_ + + static struct resource ath79_wmac_resources[] = { + { +- .start = AR913X_WMAC_BASE, +- .end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1, ++ /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, { + .start = ATH79_CPU_IRQ_IP2, +@@ -43,12 +42,8 @@ static struct platform_device ath79_wmac + }, + }; + +-void __init ath79_register_wmac(u8 *cal_data) ++static void __init ar913x_wmac_setup(void) + { +- if (cal_data) +- memcpy(ath79_wmac_data.eeprom_data, cal_data, +- sizeof(ath79_wmac_data.eeprom_data)); +- + /* reset the WMAC */ + ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); + mdelay(10); +@@ -56,5 +51,20 @@ void __init ath79_register_wmac(u8 *cal_ + ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); + mdelay(10); + ++ ath79_wmac_resources[0].start = AR913X_WMAC_BASE; ++ ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; ++} ++ ++void __init ath79_register_wmac(u8 *cal_data) ++{ ++ if (soc_is_ar913x()) ++ ar913x_wmac_setup(); ++ else ++ BUG(); ++ ++ if (cal_data) ++ memcpy(ath79_wmac_data.eeprom_data, cal_data, ++ sizeof(ath79_wmac_data.eeprom_data)); ++ + platform_device_register(&ath79_wmac_device); + } diff --git a/target/linux/ar71xx/patches-3.2/022-MIPS-ath79-Add-AR933x-specific-WMAC-setup-code.patch b/target/linux/ar71xx/patches-3.2/022-MIPS-ath79-Add-AR933x-specific-WMAC-setup-code.patch new file mode 100644 index 0000000000..2d2ba66d11 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/022-MIPS-ath79-Add-AR933x-specific-WMAC-setup-code.patch @@ -0,0 +1,113 @@ +From e2201a02b529acc65a5a1b19a52b93f9c2d98088 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:53 +0000 +Subject: [PATCH 22/27] MIPS: ath79: Add AR933x specific WMAC setup code + +The wireless MAC of the AR933x SoCs uses different base address, and +requires different setup code. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3030/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/dev-ar913x-wmac.c | 43 ++++++++++++++++++++++- + arch/mips/ath79/dev-ar913x-wmac.h | 4 +- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++- + 3 files changed, 46 insertions(+), 5 deletions(-) + +--- a/arch/mips/ath79/dev-ar913x-wmac.c ++++ b/arch/mips/ath79/dev-ar913x-wmac.c +@@ -1,7 +1,7 @@ + /* +- * Atheros AR913X SoC built-in WMAC device support ++ * Atheros AR913X/AR933X SoC built-in WMAC device support + * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it +@@ -55,10 +55,49 @@ static void __init ar913x_wmac_setup(voi + ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; + } + ++ ++static int ar933x_wmac_reset(void) ++{ ++ ath79_device_reset_clear(AR933X_RESET_WMAC); ++ ath79_device_reset_set(AR933X_RESET_WMAC); ++ ++ return 0; ++} ++ ++static int ar933x_r1_get_wmac_revision(void) ++{ ++ return ath79_soc_rev; ++} ++ ++static void __init ar933x_wmac_setup(void) ++{ ++ u32 t; ++ ++ ar933x_wmac_reset(); ++ ++ ath79_wmac_device.name = "ar933x_wmac"; ++ ++ ath79_wmac_resources[0].start = AR933X_WMAC_BASE; ++ ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; ++ ++ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if (t & AR933X_BOOTSTRAP_REF_CLK_40) ++ ath79_wmac_data.is_clk_25mhz = false; ++ else ++ ath79_wmac_data.is_clk_25mhz = true; ++ ++ if (ath79_soc_rev == 1) ++ ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; ++ ++ ath79_wmac_data.external_reset = ar933x_wmac_reset; ++} ++ + void __init ath79_register_wmac(u8 *cal_data) + { + if (soc_is_ar913x()) + ar913x_wmac_setup(); ++ if (soc_is_ar933x()) ++ ar933x_wmac_setup(); + else + BUG(); + +--- a/arch/mips/ath79/dev-ar913x-wmac.h ++++ b/arch/mips/ath79/dev-ar913x-wmac.h +@@ -1,7 +1,7 @@ + /* +- * Atheros AR913X SoC built-in WMAC device support ++ * Atheros AR913X/AR933X SoC built-in WMAC device support + * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -55,7 +55,8 @@ + + #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) + #define AR933X_UART_SIZE 0x14 +- ++#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define AR933X_WMAC_SIZE 0x20000 + #define AR933X_EHCI_BASE 0x1b000000 + #define AR933X_EHCI_SIZE 0x1000 + +@@ -233,6 +234,7 @@ + #define AR913X_RESET_USB_HOST BIT(5) + #define AR913X_RESET_USB_PHY BIT(4) + ++#define AR933X_RESET_WMAC BIT(11) + #define AR933X_RESET_USB_HOST BIT(5) + #define AR933X_RESET_USB_PHY BIT(4) + #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) diff --git a/target/linux/ar71xx/patches-3.2/023-MIPS-ath79-Rename-ATH79_DEV_AR913X_WMAC-option-to-AT.patch b/target/linux/ar71xx/patches-3.2/023-MIPS-ath79-Rename-ATH79_DEV_AR913X_WMAC-option-to-AT.patch new file mode 100644 index 0000000000..da63ac059f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/023-MIPS-ath79-Rename-ATH79_DEV_AR913X_WMAC-option-to-AT.patch @@ -0,0 +1,79 @@ +From b784c5ab6423d0327d34d08e3532a16a4563e845 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:54 +0000 +Subject: [PATCH 23/27] MIPS: ath79: Rename ATH79_DEV_AR913X_WMAC option to ATH79_DEV_WMAC + +The ATH79_DEV_AR913X_WMAC option was used to select the AR913x specific +wireless MAC registration code. The registration code now supports the +AR933X SoCs as well. Rename the option to reflect the changes. + +Also make the new option depends on SOC_AR933X. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3031/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/Kconfig | 11 ++++++----- + arch/mips/ath79/Makefile | 2 +- + 2 files changed, 7 insertions(+), 6 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -9,6 +9,7 @@ config ATH79_MACH_AP121 + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_USB ++ select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Atheros AP121 reference board. +@@ -16,11 +17,11 @@ config ATH79_MACH_AP121 + config ATH79_MACH_AP81 + bool "Atheros AP81 reference board" + select SOC_AR913X +- select ATH79_DEV_AR913X_WMAC + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_USB ++ select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Atheros AP81 reference board. +@@ -67,10 +68,6 @@ config SOC_AR933X + select USB_ARCH_HAS_EHCI + def_bool n + +-config ATH79_DEV_AR913X_WMAC +- depends on SOC_AR913X +- def_bool n +- + config ATH79_DEV_GPIO_BUTTONS + def_bool n + +@@ -83,4 +80,8 @@ config ATH79_DEV_SPI + config ATH79_DEV_USB + def_bool n + ++config ATH79_DEV_WMAC ++ depends on (SOC_AR913X || SOC_AR933X) ++ def_bool n ++ + endif +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -16,11 +16,11 @@ obj-$(CONFIG_EARLY_PRINTK) += early_pri + # Devices + # + obj-y += dev-common.o +-obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += dev-ar913x-wmac.o + obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o + obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o + obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o + obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o ++obj-$(CONFIG_ATH79_DEV_WMAC) += dev-ar913x-wmac.o + + # + # Machines diff --git a/target/linux/ar71xx/patches-3.2/024-MIPS-ath79-Register-the-wireless-MAC-device-on-the-A.patch b/target/linux/ar71xx/patches-3.2/024-MIPS-ath79-Register-the-wireless-MAC-device-on-the-A.patch new file mode 100644 index 0000000000..3c9f35670c --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/024-MIPS-ath79-Register-the-wireless-MAC-device-on-the-A.patch @@ -0,0 +1,41 @@ +From 7091af5ca0aad47826a4e3f699a7985e2d8aa886 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:54 +0000 +Subject: [PATCH 24/27] MIPS: ath79: Register the wireless MAC device on the AP121 board + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3032/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/mach-ap121.c | 4 ++++ + 1 files changed, 4 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -13,6 +13,7 @@ + #include "dev-leds-gpio.h" + #include "dev-spi.h" + #include "dev-usb.h" ++#include "dev-ar913x-wmac.h" + + #define AP121_GPIO_LED_WLAN 0 + #define AP121_GPIO_LED_USB 1 +@@ -73,6 +74,8 @@ static struct ath79_spi_platform_data ap + + static void __init ap121_setup(void) + { ++ u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); ++ + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), + ap121_leds_gpio); + ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, +@@ -82,6 +85,7 @@ static void __init ap121_setup(void) + ath79_register_spi(&ap121_spi_data, ap121_spi_info, + ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); ++ ath79_register_wmac(cal_data); + } + + MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", diff --git a/target/linux/ar71xx/patches-3.2/025-MIPS-ath79-Rename-dev-ar913x-wmac.h-to-dev-wmac.h.patch b/target/linux/ar71xx/patches-3.2/025-MIPS-ath79-Rename-dev-ar913x-wmac.h-to-dev-wmac.h.patch new file mode 100644 index 0000000000..74644d9b97 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/025-MIPS-ath79-Rename-dev-ar913x-wmac.h-to-dev-wmac.h.patch @@ -0,0 +1,96 @@ +From ece52fe72b70e35f72edf940233d125257a5f4bc Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:54 +0000 +Subject: [PATCH 25/27] MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h + +The 'ar913x' part was removed from the common variable and function names, +so remove that from the relevant header file name as well. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3033/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/dev-ar913x-wmac.c | 2 +- + arch/mips/ath79/dev-ar913x-wmac.h | 17 ----------------- + arch/mips/ath79/dev-wmac.h | 17 +++++++++++++++++ + arch/mips/ath79/mach-ap121.c | 2 +- + arch/mips/ath79/mach-ap81.c | 2 +- + 5 files changed, 20 insertions(+), 20 deletions(-) + delete mode 100644 arch/mips/ath79/dev-ar913x-wmac.h + create mode 100644 arch/mips/ath79/dev-wmac.h + +--- a/arch/mips/ath79/dev-ar913x-wmac.c ++++ b/arch/mips/ath79/dev-ar913x-wmac.c +@@ -17,7 +17,7 @@ + + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> +-#include "dev-ar913x-wmac.h" ++#include "dev-wmac.h" + + static struct ath9k_platform_data ath79_wmac_data; + +--- a/arch/mips/ath79/dev-ar913x-wmac.h ++++ /dev/null +@@ -1,17 +0,0 @@ +-/* +- * Atheros AR913X/AR933X SoC built-in WMAC device support +- * +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef _ATH79_DEV_WMAC_H +-#define _ATH79_DEV_WMAC_H +- +-void ath79_register_wmac(u8 *cal_data); +- +-#endif /* _ATH79_DEV_WMAC_H */ +--- /dev/null ++++ b/arch/mips/ath79/dev-wmac.h +@@ -0,0 +1,17 @@ ++/* ++ * Atheros AR913X/AR933X SoC built-in WMAC device support ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _ATH79_DEV_WMAC_H ++#define _ATH79_DEV_WMAC_H ++ ++void ath79_register_wmac(u8 *cal_data); ++ ++#endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -13,7 +13,7 @@ + #include "dev-leds-gpio.h" + #include "dev-spi.h" + #include "dev-usb.h" +-#include "dev-ar913x-wmac.h" ++#include "dev-wmac.h" + + #define AP121_GPIO_LED_WLAN 0 + #define AP121_GPIO_LED_USB 1 +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -10,7 +10,7 @@ + */ + + #include "machtypes.h" +-#include "dev-ar913x-wmac.h" ++#include "dev-wmac.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" diff --git a/target/linux/ar71xx/patches-3.2/026-MIPS-ath79-Rename-dev-ar913x-wmac.c-to-dev-wmac.c.patch b/target/linux/ar71xx/patches-3.2/026-MIPS-ath79-Rename-dev-ar913x-wmac.c-to-dev-wmac.c.patch new file mode 100644 index 0000000000..c9a4ce9a1c --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/026-MIPS-ath79-Rename-dev-ar913x-wmac.c-to-dev-wmac.c.patch @@ -0,0 +1,255 @@ +From c1999a36c113e583f785728b3d8f7a26412c61cd Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 00:17:54 +0000 +Subject: [PATCH 26/27] MIPS: ath79: Rename dev-ar913x-wmac.c to dev-wmac.c + +Rename the file as a last step of the 'ar913x' removal changes. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: Imre Kaloz <kaloz@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3034/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/Makefile | 2 +- + arch/mips/ath79/dev-ar913x-wmac.c | 109 ------------------------------------- + arch/mips/ath79/dev-wmac.c | 109 +++++++++++++++++++++++++++++++++++++ + 3 files changed, 110 insertions(+), 110 deletions(-) + delete mode 100644 arch/mips/ath79/dev-ar913x-wmac.c + create mode 100644 arch/mips/ath79/dev-wmac.c + +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -20,7 +20,7 @@ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += + obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o + obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o + obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o +-obj-$(CONFIG_ATH79_DEV_WMAC) += dev-ar913x-wmac.o ++obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o + + # + # Machines +--- a/arch/mips/ath79/dev-ar913x-wmac.c ++++ /dev/null +@@ -1,109 +0,0 @@ +-/* +- * Atheros AR913X/AR933X SoC built-in WMAC device support +- * +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/init.h> +-#include <linux/delay.h> +-#include <linux/irq.h> +-#include <linux/platform_device.h> +-#include <linux/ath9k_platform.h> +- +-#include <asm/mach-ath79/ath79.h> +-#include <asm/mach-ath79/ar71xx_regs.h> +-#include "dev-wmac.h" +- +-static struct ath9k_platform_data ath79_wmac_data; +- +-static struct resource ath79_wmac_resources[] = { +- { +- /* .start and .end fields are filled dynamically */ +- .flags = IORESOURCE_MEM, +- }, { +- .start = ATH79_CPU_IRQ_IP2, +- .end = ATH79_CPU_IRQ_IP2, +- .flags = IORESOURCE_IRQ, +- }, +-}; +- +-static struct platform_device ath79_wmac_device = { +- .name = "ath9k", +- .id = -1, +- .resource = ath79_wmac_resources, +- .num_resources = ARRAY_SIZE(ath79_wmac_resources), +- .dev = { +- .platform_data = &ath79_wmac_data, +- }, +-}; +- +-static void __init ar913x_wmac_setup(void) +-{ +- /* reset the WMAC */ +- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); +- mdelay(10); +- +- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); +- mdelay(10); +- +- ath79_wmac_resources[0].start = AR913X_WMAC_BASE; +- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; +-} +- +- +-static int ar933x_wmac_reset(void) +-{ +- ath79_device_reset_clear(AR933X_RESET_WMAC); +- ath79_device_reset_set(AR933X_RESET_WMAC); +- +- return 0; +-} +- +-static int ar933x_r1_get_wmac_revision(void) +-{ +- return ath79_soc_rev; +-} +- +-static void __init ar933x_wmac_setup(void) +-{ +- u32 t; +- +- ar933x_wmac_reset(); +- +- ath79_wmac_device.name = "ar933x_wmac"; +- +- ath79_wmac_resources[0].start = AR933X_WMAC_BASE; +- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; +- +- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); +- if (t & AR933X_BOOTSTRAP_REF_CLK_40) +- ath79_wmac_data.is_clk_25mhz = false; +- else +- ath79_wmac_data.is_clk_25mhz = true; +- +- if (ath79_soc_rev == 1) +- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; +- +- ath79_wmac_data.external_reset = ar933x_wmac_reset; +-} +- +-void __init ath79_register_wmac(u8 *cal_data) +-{ +- if (soc_is_ar913x()) +- ar913x_wmac_setup(); +- if (soc_is_ar933x()) +- ar933x_wmac_setup(); +- else +- BUG(); +- +- if (cal_data) +- memcpy(ath79_wmac_data.eeprom_data, cal_data, +- sizeof(ath79_wmac_data.eeprom_data)); +- +- platform_device_register(&ath79_wmac_device); +-} +--- /dev/null ++++ b/arch/mips/ath79/dev-wmac.c +@@ -0,0 +1,109 @@ ++/* ++ * Atheros AR913X/AR933X SoC built-in WMAC device support ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/irq.h> ++#include <linux/platform_device.h> ++#include <linux/ath9k_platform.h> ++ ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include "dev-wmac.h" ++ ++static struct ath9k_platform_data ath79_wmac_data; ++ ++static struct resource ath79_wmac_resources[] = { ++ { ++ /* .start and .end fields are filled dynamically */ ++ .flags = IORESOURCE_MEM, ++ }, { ++ .start = ATH79_CPU_IRQ_IP2, ++ .end = ATH79_CPU_IRQ_IP2, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device ath79_wmac_device = { ++ .name = "ath9k", ++ .id = -1, ++ .resource = ath79_wmac_resources, ++ .num_resources = ARRAY_SIZE(ath79_wmac_resources), ++ .dev = { ++ .platform_data = &ath79_wmac_data, ++ }, ++}; ++ ++static void __init ar913x_wmac_setup(void) ++{ ++ /* reset the WMAC */ ++ ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); ++ mdelay(10); ++ ++ ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); ++ mdelay(10); ++ ++ ath79_wmac_resources[0].start = AR913X_WMAC_BASE; ++ ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; ++} ++ ++ ++static int ar933x_wmac_reset(void) ++{ ++ ath79_device_reset_clear(AR933X_RESET_WMAC); ++ ath79_device_reset_set(AR933X_RESET_WMAC); ++ ++ return 0; ++} ++ ++static int ar933x_r1_get_wmac_revision(void) ++{ ++ return ath79_soc_rev; ++} ++ ++static void __init ar933x_wmac_setup(void) ++{ ++ u32 t; ++ ++ ar933x_wmac_reset(); ++ ++ ath79_wmac_device.name = "ar933x_wmac"; ++ ++ ath79_wmac_resources[0].start = AR933X_WMAC_BASE; ++ ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; ++ ++ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if (t & AR933X_BOOTSTRAP_REF_CLK_40) ++ ath79_wmac_data.is_clk_25mhz = false; ++ else ++ ath79_wmac_data.is_clk_25mhz = true; ++ ++ if (ath79_soc_rev == 1) ++ ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; ++ ++ ath79_wmac_data.external_reset = ar933x_wmac_reset; ++} ++ ++void __init ath79_register_wmac(u8 *cal_data) ++{ ++ if (soc_is_ar913x()) ++ ar913x_wmac_setup(); ++ if (soc_is_ar933x()) ++ ar933x_wmac_setup(); ++ else ++ BUG(); ++ ++ if (cal_data) ++ memcpy(ath79_wmac_data.eeprom_data, cal_data, ++ sizeof(ath79_wmac_data.eeprom_data)); ++ ++ platform_device_register(&ath79_wmac_device); ++} diff --git a/target/linux/ar71xx/patches-3.2/027-watchdog-ath79_wdt-flush-register-writes.patch b/target/linux/ar71xx/patches-3.2/027-watchdog-ath79_wdt-flush-register-writes.patch new file mode 100644 index 0000000000..32d39448a0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/027-watchdog-ath79_wdt-flush-register-writes.patch @@ -0,0 +1,43 @@ +From 156560a512a39284148d556ab96e2e833e816666 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 23 Dec 2011 19:25:42 +0100 +Subject: [PATCH 27/27] watchdog: ath79_wdt: flush register writes + +The watchdog register writes required to have a flush +in order to commit the values to the register. Without +the flush, the driver not function correctly on AR934X +SoCs. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Signed-off-by: Wim Van Sebroeck <wim@iguana.be> +--- + drivers/watchdog/ath79_wdt.c | 6 ++++++ + 1 files changed, 6 insertions(+), 0 deletions(-) + +--- a/drivers/watchdog/ath79_wdt.c ++++ b/drivers/watchdog/ath79_wdt.c +@@ -68,17 +68,23 @@ static int max_timeout; + static inline void ath79_wdt_keepalive(void) + { + ath79_reset_wr(AR71XX_RESET_REG_WDOG, wdt_freq * timeout); ++ /* flush write */ ++ ath79_reset_rr(AR71XX_RESET_REG_WDOG); + } + + static inline void ath79_wdt_enable(void) + { + ath79_wdt_keepalive(); + ath79_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR); ++ /* flush write */ ++ ath79_reset_rr(AR71XX_RESET_REG_WDOG_CTRL); + } + + static inline void ath79_wdt_disable(void) + { + ath79_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE); ++ /* flush write */ ++ ath79_reset_rr(AR71XX_RESET_REG_WDOG_CTRL); + } + + static int ath79_wdt_set_timeout(int val) diff --git a/target/linux/ar71xx/patches-3.2/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch b/target/linux/ar71xx/patches-3.2/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch new file mode 100644 index 0000000000..df6e3e11a2 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch @@ -0,0 +1,24 @@ +From cf6855546330c3d349d41496975f32255bb6fd07 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 22:02:57 +0100 +Subject: [PATCH 01/35] MIPS: ath79: avoid a kernel bug on AR913X + +Wireless mac registration causes a BUG on AR913X SoCs due to +a missing 'else'. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + arch/mips/ath79/dev-wmac.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_ + { + if (soc_is_ar913x()) + ar913x_wmac_setup(); +- if (soc_is_ar933x()) ++ else if (soc_is_ar933x()) + ar933x_wmac_setup(); + else + BUG(); diff --git a/target/linux/ar71xx/patches-3.2/102-MIPS-ath79-separate-common-PCI-code.patch b/target/linux/ar71xx/patches-3.2/102-MIPS-ath79-separate-common-PCI-code.patch new file mode 100644 index 0000000000..547f4fbd27 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/102-MIPS-ath79-separate-common-PCI-code.patch @@ -0,0 +1,151 @@ +From c98b48027516a2e71688a5957e4e0120f4aa8c61 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 09:47:44 +0100 +Subject: [PATCH 02/35] MIPS: ath79: separate common PCI code +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The 'pcibios_map_irq' and 'pcibios_plat_dev_init' +are common functions and only instance one of them +can be present in a single kernel. + +Currently these functions can be built only if the +CONFIG_SOC_AR724X option is selected. However the +ath79 platform contain support for the AR71XX SoCs,. +The AR71XX SoCs have a differnet PCI controller, +and those will require a different code. + +Move the common PCI code into a separeate file in +order to be able to use that with other SoCs as +well. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: René Bolldorf <xsecute@googlemail.com> + +v4: - add an Acked-by tag from René +v3: - no changes +v2: - no changes +--- + arch/mips/ath79/Makefile | 1 + + arch/mips/ath79/pci.c | 46 +++++++++++++++++++++++++++++++++++++++++++ + arch/mips/pci/pci-ath724x.c | 34 ------------------------------- + 3 files changed, 47 insertions(+), 34 deletions(-) + create mode 100644 arch/mips/ath79/pci.c + +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -11,6 +11,7 @@ + obj-y := prom.o setup.o irq.o common.o clock.o gpio.o + + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o ++obj-$(CONFIG_PCI) += pci.o + + # + # Devices +--- /dev/null ++++ b/arch/mips/ath79/pci.c +@@ -0,0 +1,46 @@ ++/* ++ * Atheros AR71XX/AR724X specific PCI setup code ++ * ++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/pci.h> ++#include <asm/mach-ath79/pci-ath724x.h> ++ ++static struct ath724x_pci_data *pci_data; ++static int pci_data_size; ++ ++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size) ++{ ++ pci_data = data; ++ pci_data_size = size; ++} ++ ++int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) ++{ ++ unsigned int devfn = dev->devfn; ++ int irq = -1; ++ ++ if (devfn > pci_data_size - 1) ++ return irq; ++ ++ irq = pci_data[devfn].irq; ++ ++ return irq; ++} ++ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ unsigned int devfn = dev->devfn; ++ ++ if (devfn > pci_data_size - 1) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ dev->dev.platform_data = pci_data[devfn].pdata; ++ ++ return PCIBIOS_SUCCESSFUL; ++} +--- a/arch/mips/pci/pci-ath724x.c ++++ b/arch/mips/pci/pci-ath724x.c +@@ -9,7 +9,6 @@ + */ + + #include <linux/pci.h> +-#include <asm/mach-ath79/pci-ath724x.h> + + #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) + #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) +@@ -19,8 +18,6 @@ + #define ATH724X_PCI_MEM_SIZE 0x08000000 + + static DEFINE_SPINLOCK(ath724x_pci_lock); +-static struct ath724x_pci_data *pci_data; +-static int pci_data_size; + + static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *value) +@@ -133,37 +130,6 @@ static struct pci_controller ath724x_pci + .mem_resource = &ath724x_mem_resource, + }; + +-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size) +-{ +- pci_data = data; +- pci_data_size = size; +-} +- +-int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) +-{ +- unsigned int devfn = dev->devfn; +- int irq = -1; +- +- if (devfn > pci_data_size - 1) +- return irq; +- +- irq = pci_data[devfn].irq; +- +- return irq; +-} +- +-int pcibios_plat_dev_init(struct pci_dev *dev) +-{ +- unsigned int devfn = dev->devfn; +- +- if (devfn > pci_data_size - 1) +- return PCIBIOS_DEVICE_NOT_FOUND; +- +- dev->dev.platform_data = pci_data[devfn].pdata; +- +- return PCIBIOS_SUCCESSFUL; +-} +- + static int __init ath724x_pcibios_init(void) + { + register_pci_controller(&ath724x_pci_controller); diff --git a/target/linux/ar71xx/patches-3.2/103-MIPS-ath79-rename-pci-ath724x.h.patch b/target/linux/ar71xx/patches-3.2/103-MIPS-ath79-rename-pci-ath724x.h.patch new file mode 100644 index 0000000000..a5c25b19ba --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/103-MIPS-ath79-rename-pci-ath724x.h.patch @@ -0,0 +1,103 @@ +From 204fd70abd99099f6c2e2213a2baa1d51c03a039 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 09:50:50 +0100 +Subject: [PATCH 03/35] MIPS: ath79: rename pci-ath724x.h +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The declared function in this header file is used by the +ath79 platform code only. Move the header to the platform +directory. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: René Bolldorf <xsecute@googlemail.com> + +v4: - add an Acked-by tag from René +v3: - move include "pci.h" out of the #ifdef CONFIG_PCI section +v2: - no changes +--- + arch/mips/ath79/mach-ubnt-xm.c | 2 +- + arch/mips/ath79/pci.c | 2 +- + arch/mips/ath79/pci.h | 21 +++++++++++++++++++++ + arch/mips/include/asm/mach-ath79/pci-ath724x.h | 21 --------------------- + 4 files changed, 23 insertions(+), 23 deletions(-) + create mode 100644 arch/mips/ath79/pci.h + delete mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -15,13 +15,13 @@ + + #ifdef CONFIG_PCI + #include <linux/ath9k_platform.h> +-#include <asm/mach-ath79/pci-ath724x.h> + #endif /* CONFIG_PCI */ + + #include "machtypes.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" ++#include "pci.h" + + #define UBNT_XM_GPIO_LED_L1 0 + #define UBNT_XM_GPIO_LED_L2 1 +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -9,7 +9,7 @@ + */ + + #include <linux/pci.h> +-#include <asm/mach-ath79/pci-ath724x.h> ++#include "pci.h" + + static struct ath724x_pci_data *pci_data; + static int pci_data_size; +--- /dev/null ++++ b/arch/mips/ath79/pci.h +@@ -0,0 +1,21 @@ ++/* ++ * Atheros 724x PCI support ++ * ++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H ++#define __ASM_MACH_ATH79_PCI_ATH724X_H ++ ++struct ath724x_pci_data { ++ int irq; ++ void *pdata; ++}; ++ ++void ath724x_pci_add_data(struct ath724x_pci_data *data, int size); ++ ++#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */ +--- a/arch/mips/include/asm/mach-ath79/pci-ath724x.h ++++ /dev/null +@@ -1,21 +0,0 @@ +-/* +- * Atheros 724x PCI support +- * +- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H +-#define __ASM_MACH_ATH79_PCI_ATH724X_H +- +-struct ath724x_pci_data { +- int irq; +- void *pdata; +-}; +- +-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size); +- +-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */ diff --git a/target/linux/ar71xx/patches-3.2/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch b/target/linux/ar71xx/patches-3.2/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch new file mode 100644 index 0000000000..42fa5c8a42 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch @@ -0,0 +1,62 @@ +From 7e59b95e3424c078de0d75d699433da0dd289fc1 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 10:13:37 +0100 +Subject: [PATCH 04/35] MIPS: ath79: make ath724x_pcibios_init visible for external code +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: René Bolldorf <xsecute@googlemail.com> +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v4: - add a sob tag +v3: - no changes +v2: - fix a typo in my e-mail address +--- + arch/mips/include/asm/mach-ath79/pci.h | 20 ++++++++++++++++++++ + arch/mips/pci/pci-ath724x.c | 3 ++- + 2 files changed, 22 insertions(+), 1 deletions(-) + create mode 100644 arch/mips/include/asm/mach-ath79/pci.h + +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/pci.h +@@ -0,0 +1,20 @@ ++/* ++ * Atheros 724x PCI support ++ * ++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_MACH_ATH79_PCI_H ++#define __ASM_MACH_ATH79_PCI_H ++ ++#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) ++int ath724x_pcibios_init(void); ++#else ++static inline int ath724x_pcibios_init(void) { return 0 }; ++#endif ++ ++#endif /* __ASM_MACH_ATH79_PCI_H */ +--- a/arch/mips/pci/pci-ath724x.c ++++ b/arch/mips/pci/pci-ath724x.c +@@ -9,6 +9,7 @@ + */ + + #include <linux/pci.h> ++#include <asm/mach-ath79/pci.h> + + #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) + #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) +@@ -130,7 +131,7 @@ static struct pci_controller ath724x_pci + .mem_resource = &ath724x_mem_resource, + }; + +-static int __init ath724x_pcibios_init(void) ++int __init ath724x_pcibios_init(void) + { + register_pci_controller(&ath724x_pci_controller); + diff --git a/target/linux/ar71xx/patches-3.2/105-MIPS-ath79-add-a-common-PCI-registration-function.patch b/target/linux/ar71xx/patches-3.2/105-MIPS-ath79-add-a-common-PCI-registration-function.patch new file mode 100644 index 0000000000..1b52f25e5e --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/105-MIPS-ath79-add-a-common-PCI-registration-function.patch @@ -0,0 +1,80 @@ +From fbf38a9b03d0c47ed602f090ebb2d8ecc0d51d04 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 10:25:26 +0100 +Subject: [PATCH 05/35] MIPS: ath79: add a common PCI registration function + +The current code unconditionally registers the AR724X +specific PCI controller, even if the kernel is running +on a different SoC. + +Add a common function for PCI controller registration, +and only register the AR724X PCI controller if the kernel +is running on an AR724X SoC. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v4: - simplify ath79_register_pci function +v3: - fix compile error if CONFIG_PCI is not defined + - add __init annotation to ath79_register_pci +v2: - no changes +--- + arch/mips/ath79/mach-ubnt-xm.c | 1 + + arch/mips/ath79/pci.c | 10 ++++++++++ + arch/mips/ath79/pci.h | 6 ++++++ + arch/mips/pci/pci-ath724x.c | 2 -- + 4 files changed, 17 insertions(+), 2 deletions(-) + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -111,6 +111,7 @@ static void __init ubnt_xm_init(void) + ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); + #endif /* CONFIG_PCI */ + ++ ath79_register_pci(); + } + + MIPS_MACHINE(ATH79_MACH_UBNT_XM, +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -9,6 +9,8 @@ + */ + + #include <linux/pci.h> ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/pci.h> + #include "pci.h" + + static struct ath724x_pci_data *pci_data; +@@ -44,3 +46,11 @@ int pcibios_plat_dev_init(struct pci_dev + + return PCIBIOS_SUCCESSFUL; + } ++ ++int __init ath79_register_pci(void) ++{ ++ if (soc_is_ar724x()) ++ return ath724x_pcibios_init(); ++ ++ return -ENODEV; ++} +--- a/arch/mips/ath79/pci.h ++++ b/arch/mips/ath79/pci.h +@@ -18,4 +18,10 @@ struct ath724x_pci_data { + + void ath724x_pci_add_data(struct ath724x_pci_data *data, int size); + ++#ifdef CONFIG_PCI ++int ath79_register_pci(void); ++#else ++static inline int ath79_register_pci(void) { return 0; } ++#endif ++ + #endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */ +--- a/arch/mips/pci/pci-ath724x.c ++++ b/arch/mips/pci/pci-ath724x.c +@@ -137,5 +137,3 @@ int __init ath724x_pcibios_init(void) + + return PCIBIOS_SUCCESSFUL; + } +- +-arch_initcall(ath724x_pcibios_init); diff --git a/target/linux/ar71xx/patches-3.2/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch b/target/linux/ar71xx/patches-3.2/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch new file mode 100644 index 0000000000..55adff0a70 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch @@ -0,0 +1,318 @@ +From 9510a9988638ae2386277a832fab2df8ca37d75a Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 11:07:26 +0100 +Subject: [PATCH 06/35] MIPS: ath79: rename pci-ath724x.c to make it reflect the real SoC name +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: René Bolldorf <xsecute@googlemail.com> + +v4: - add an Acked-by tag from René +v4: - no changes +v3: - no changes +v2: - no changes +--- + arch/mips/pci/Makefile | 2 +- + arch/mips/pci/pci-ar724x.c | 139 +++++++++++++++++++++++++++++++++++++++++++ + arch/mips/pci/pci-ath724x.c | 139 ------------------------------------------- + 3 files changed, 140 insertions(+), 140 deletions(-) + create mode 100644 arch/mips/pci/pci-ar724x.c + delete mode 100644 arch/mips/pci/pci-ath724x.c + +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -19,7 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o + obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o +-obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o ++obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o + + # + # These are still pretty much in the old state, watch, go blind. +--- /dev/null ++++ b/arch/mips/pci/pci-ar724x.c +@@ -0,0 +1,139 @@ ++/* ++ * Atheros 724x PCI support ++ * ++ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/pci.h> ++#include <asm/mach-ath79/pci.h> ++ ++#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) ++#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) ++ ++#define ATH724X_PCI_DEV_BASE 0x14000000 ++#define ATH724X_PCI_MEM_BASE 0x10000000 ++#define ATH724X_PCI_MEM_SIZE 0x08000000 ++ ++static DEFINE_SPINLOCK(ath724x_pci_lock); ++ ++static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, uint32_t *value) ++{ ++ unsigned long flags, addr, tval, mask; ++ ++ if (devfn) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ if (where & (size - 1)) ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ ++ spin_lock_irqsave(&ath724x_pci_lock, flags); ++ ++ switch (size) { ++ case 1: ++ addr = where & ~3; ++ mask = 0xff000000 >> ((where % 4) * 8); ++ tval = reg_read(ATH724X_PCI_DEV_BASE + addr); ++ tval = tval & ~mask; ++ *value = (tval >> ((4 - (where % 4))*8)); ++ break; ++ case 2: ++ addr = where & ~3; ++ mask = 0xffff0000 >> ((where % 4)*8); ++ tval = reg_read(ATH724X_PCI_DEV_BASE + addr); ++ tval = tval & ~mask; ++ *value = (tval >> ((4 - (where % 4))*8)); ++ break; ++ case 4: ++ *value = reg_read(ATH724X_PCI_DEV_BASE + where); ++ break; ++ default: ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ } ++ ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, ++ int size, uint32_t value) ++{ ++ unsigned long flags, tval, addr, mask; ++ ++ if (devfn) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ if (where & (size - 1)) ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ ++ spin_lock_irqsave(&ath724x_pci_lock, flags); ++ ++ switch (size) { ++ case 1: ++ addr = (ATH724X_PCI_DEV_BASE + where) & ~3; ++ mask = 0xff000000 >> ((where % 4)*8); ++ tval = reg_read(addr); ++ tval = tval & ~mask; ++ tval |= (value << ((4 - (where % 4))*8)) & mask; ++ reg_write(addr, tval); ++ break; ++ case 2: ++ addr = (ATH724X_PCI_DEV_BASE + where) & ~3; ++ mask = 0xffff0000 >> ((where % 4)*8); ++ tval = reg_read(addr); ++ tval = tval & ~mask; ++ tval |= (value << ((4 - (where % 4))*8)) & mask; ++ reg_write(addr, tval); ++ break; ++ case 4: ++ reg_write((ATH724X_PCI_DEV_BASE + where), value); ++ break; ++ default: ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ } ++ ++ spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static struct pci_ops ath724x_pci_ops = { ++ .read = ath724x_pci_read, ++ .write = ath724x_pci_write, ++}; ++ ++static struct resource ath724x_io_resource = { ++ .name = "PCI IO space", ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct resource ath724x_mem_resource = { ++ .name = "PCI memory space", ++ .start = ATH724X_PCI_MEM_BASE, ++ .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct pci_controller ath724x_pci_controller = { ++ .pci_ops = &ath724x_pci_ops, ++ .io_resource = &ath724x_io_resource, ++ .mem_resource = &ath724x_mem_resource, ++}; ++ ++int __init ath724x_pcibios_init(void) ++{ ++ register_pci_controller(&ath724x_pci_controller); ++ ++ return PCIBIOS_SUCCESSFUL; ++} +--- a/arch/mips/pci/pci-ath724x.c ++++ /dev/null +@@ -1,139 +0,0 @@ +-/* +- * Atheros 724x PCI support +- * +- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/pci.h> +-#include <asm/mach-ath79/pci.h> +- +-#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) +-#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) +- +-#define ATH724X_PCI_DEV_BASE 0x14000000 +-#define ATH724X_PCI_MEM_BASE 0x10000000 +-#define ATH724X_PCI_MEM_SIZE 0x08000000 +- +-static DEFINE_SPINLOCK(ath724x_pci_lock); +- +-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, +- int size, uint32_t *value) +-{ +- unsigned long flags, addr, tval, mask; +- +- if (devfn) +- return PCIBIOS_DEVICE_NOT_FOUND; +- +- if (where & (size - 1)) +- return PCIBIOS_BAD_REGISTER_NUMBER; +- +- spin_lock_irqsave(&ath724x_pci_lock, flags); +- +- switch (size) { +- case 1: +- addr = where & ~3; +- mask = 0xff000000 >> ((where % 4) * 8); +- tval = reg_read(ATH724X_PCI_DEV_BASE + addr); +- tval = tval & ~mask; +- *value = (tval >> ((4 - (where % 4))*8)); +- break; +- case 2: +- addr = where & ~3; +- mask = 0xffff0000 >> ((where % 4)*8); +- tval = reg_read(ATH724X_PCI_DEV_BASE + addr); +- tval = tval & ~mask; +- *value = (tval >> ((4 - (where % 4))*8)); +- break; +- case 4: +- *value = reg_read(ATH724X_PCI_DEV_BASE + where); +- break; +- default: +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); +- +- return PCIBIOS_BAD_REGISTER_NUMBER; +- } +- +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); +- +- return PCIBIOS_SUCCESSFUL; +-} +- +-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, +- int size, uint32_t value) +-{ +- unsigned long flags, tval, addr, mask; +- +- if (devfn) +- return PCIBIOS_DEVICE_NOT_FOUND; +- +- if (where & (size - 1)) +- return PCIBIOS_BAD_REGISTER_NUMBER; +- +- spin_lock_irqsave(&ath724x_pci_lock, flags); +- +- switch (size) { +- case 1: +- addr = (ATH724X_PCI_DEV_BASE + where) & ~3; +- mask = 0xff000000 >> ((where % 4)*8); +- tval = reg_read(addr); +- tval = tval & ~mask; +- tval |= (value << ((4 - (where % 4))*8)) & mask; +- reg_write(addr, tval); +- break; +- case 2: +- addr = (ATH724X_PCI_DEV_BASE + where) & ~3; +- mask = 0xffff0000 >> ((where % 4)*8); +- tval = reg_read(addr); +- tval = tval & ~mask; +- tval |= (value << ((4 - (where % 4))*8)) & mask; +- reg_write(addr, tval); +- break; +- case 4: +- reg_write((ATH724X_PCI_DEV_BASE + where), value); +- break; +- default: +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); +- +- return PCIBIOS_BAD_REGISTER_NUMBER; +- } +- +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); +- +- return PCIBIOS_SUCCESSFUL; +-} +- +-static struct pci_ops ath724x_pci_ops = { +- .read = ath724x_pci_read, +- .write = ath724x_pci_write, +-}; +- +-static struct resource ath724x_io_resource = { +- .name = "PCI IO space", +- .start = 0, +- .end = 0, +- .flags = IORESOURCE_IO, +-}; +- +-static struct resource ath724x_mem_resource = { +- .name = "PCI memory space", +- .start = ATH724X_PCI_MEM_BASE, +- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1, +- .flags = IORESOURCE_MEM, +-}; +- +-static struct pci_controller ath724x_pci_controller = { +- .pci_ops = &ath724x_pci_ops, +- .io_resource = &ath724x_io_resource, +- .mem_resource = &ath724x_mem_resource, +-}; +- +-int __init ath724x_pcibios_init(void) +-{ +- register_pci_controller(&ath724x_pci_controller); +- +- return PCIBIOS_SUCCESSFUL; +-} diff --git a/target/linux/ar71xx/patches-3.2/107-MIPS-ath79-replace-ath724x-to-ar724x.patch b/target/linux/ar71xx/patches-3.2/107-MIPS-ath79-replace-ath724x-to-ar724x.patch new file mode 100644 index 0000000000..7e5df9f0d4 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/107-MIPS-ath79-replace-ath724x-to-ar724x.patch @@ -0,0 +1,266 @@ +From 0cbee5634678ffbd10bee9e302d013392dd8289e Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 11:16:33 +0100 +Subject: [PATCH 07/35] MIPS: ath79: replace ath724x to ar724x +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Replace the 'ath724x' to 'ar724x' in function, variable and +structure names to reflect the name of the real SoC. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: René Bolldorf <xsecute@googlemail.com> + +v4: - add an Acked-by tag from René + - refreshed due to the changes in a previous patch +v3: - no changes +v2: - no changes +--- + arch/mips/ath79/mach-ubnt-xm.c | 4 +- + arch/mips/ath79/pci.c | 6 ++-- + arch/mips/ath79/pci.h | 10 +++--- + arch/mips/include/asm/mach-ath79/pci.h | 4 +- + arch/mips/pci/pci-ar724x.c | 62 ++++++++++++++++---------------- + 5 files changed, 43 insertions(+), 43 deletions(-) + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -84,7 +84,7 @@ static struct ath79_spi_platform_data ub + #ifdef CONFIG_PCI + static struct ath9k_platform_data ubnt_xm_eeprom_data; + +-static struct ath724x_pci_data ubnt_xm_pci_data[] = { ++static struct ar724x_pci_data ubnt_xm_pci_data[] = { + { + .irq = UBNT_XM_PCI_IRQ, + .pdata = &ubnt_xm_eeprom_data, +@@ -108,7 +108,7 @@ static void __init ubnt_xm_init(void) + memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, + sizeof(ubnt_xm_eeprom_data.eeprom_data)); + +- ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); ++ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); + #endif /* CONFIG_PCI */ + + ath79_register_pci(); +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -13,10 +13,10 @@ + #include <asm/mach-ath79/pci.h> + #include "pci.h" + +-static struct ath724x_pci_data *pci_data; ++static struct ar724x_pci_data *pci_data; + static int pci_data_size; + +-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size) ++void ar724x_pci_add_data(struct ar724x_pci_data *data, int size) + { + pci_data = data; + pci_data_size = size; +@@ -50,7 +50,7 @@ int pcibios_plat_dev_init(struct pci_dev + int __init ath79_register_pci(void) + { + if (soc_is_ar724x()) +- return ath724x_pcibios_init(); ++ return ar724x_pcibios_init(); + + return -ENODEV; + } +--- a/arch/mips/ath79/pci.h ++++ b/arch/mips/ath79/pci.h +@@ -8,15 +8,15 @@ + * by the Free Software Foundation. + */ + +-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H +-#define __ASM_MACH_ATH79_PCI_ATH724X_H ++#ifndef _ATH79_PCI_H ++#define _ATH79_PCI_H + +-struct ath724x_pci_data { ++struct ar724x_pci_data { + int irq; + void *pdata; + }; + +-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size); ++void ar724x_pci_add_data(struct ar724x_pci_data *data, int size); + + #ifdef CONFIG_PCI + int ath79_register_pci(void); +@@ -24,4 +24,4 @@ int ath79_register_pci(void); + static inline int ath79_register_pci(void) { return 0; } + #endif + +-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */ ++#endif /* _ATH79_PCI_H */ +--- a/arch/mips/include/asm/mach-ath79/pci.h ++++ b/arch/mips/include/asm/mach-ath79/pci.h +@@ -12,9 +12,9 @@ + #define __ASM_MACH_ATH79_PCI_H + + #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) +-int ath724x_pcibios_init(void); ++int ar724x_pcibios_init(void); + #else +-static inline int ath724x_pcibios_init(void) { return 0 }; ++static inline int ar724x_pcibios_init(void) { return 0 }; + #endif + + #endif /* __ASM_MACH_ATH79_PCI_H */ +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -14,13 +14,13 @@ + #define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) + #define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) + +-#define ATH724X_PCI_DEV_BASE 0x14000000 +-#define ATH724X_PCI_MEM_BASE 0x10000000 +-#define ATH724X_PCI_MEM_SIZE 0x08000000 ++#define AR724X_PCI_DEV_BASE 0x14000000 ++#define AR724X_PCI_MEM_BASE 0x10000000 ++#define AR724X_PCI_MEM_SIZE 0x08000000 + +-static DEFINE_SPINLOCK(ath724x_pci_lock); ++static DEFINE_SPINLOCK(ar724x_pci_lock); + +-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, ++static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *value) + { + unsigned long flags, addr, tval, mask; +@@ -31,38 +31,38 @@ static int ath724x_pci_read(struct pci_b + if (where & (size - 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + +- spin_lock_irqsave(&ath724x_pci_lock, flags); ++ spin_lock_irqsave(&ar724x_pci_lock, flags); + + switch (size) { + case 1: + addr = where & ~3; + mask = 0xff000000 >> ((where % 4) * 8); +- tval = reg_read(ATH724X_PCI_DEV_BASE + addr); ++ tval = reg_read(AR724X_PCI_DEV_BASE + addr); + tval = tval & ~mask; + *value = (tval >> ((4 - (where % 4))*8)); + break; + case 2: + addr = where & ~3; + mask = 0xffff0000 >> ((where % 4)*8); +- tval = reg_read(ATH724X_PCI_DEV_BASE + addr); ++ tval = reg_read(AR724X_PCI_DEV_BASE + addr); + tval = tval & ~mask; + *value = (tval >> ((4 - (where % 4))*8)); + break; + case 4: +- *value = reg_read(ATH724X_PCI_DEV_BASE + where); ++ *value = reg_read(AR724X_PCI_DEV_BASE + where); + break; + default: +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ spin_unlock_irqrestore(&ar724x_pci_lock, flags); + + return PCIBIOS_BAD_REGISTER_NUMBER; + } + +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ spin_unlock_irqrestore(&ar724x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; + } + +-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, ++static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t value) + { + unsigned long flags, tval, addr, mask; +@@ -73,11 +73,11 @@ static int ath724x_pci_write(struct pci_ + if (where & (size - 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + +- spin_lock_irqsave(&ath724x_pci_lock, flags); ++ spin_lock_irqsave(&ar724x_pci_lock, flags); + + switch (size) { + case 1: +- addr = (ATH724X_PCI_DEV_BASE + where) & ~3; ++ addr = (AR724X_PCI_DEV_BASE + where) & ~3; + mask = 0xff000000 >> ((where % 4)*8); + tval = reg_read(addr); + tval = tval & ~mask; +@@ -85,7 +85,7 @@ static int ath724x_pci_write(struct pci_ + reg_write(addr, tval); + break; + case 2: +- addr = (ATH724X_PCI_DEV_BASE + where) & ~3; ++ addr = (AR724X_PCI_DEV_BASE + where) & ~3; + mask = 0xffff0000 >> ((where % 4)*8); + tval = reg_read(addr); + tval = tval & ~mask; +@@ -93,47 +93,47 @@ static int ath724x_pci_write(struct pci_ + reg_write(addr, tval); + break; + case 4: +- reg_write((ATH724X_PCI_DEV_BASE + where), value); ++ reg_write((AR724X_PCI_DEV_BASE + where), value); + break; + default: +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ spin_unlock_irqrestore(&ar724x_pci_lock, flags); + + return PCIBIOS_BAD_REGISTER_NUMBER; + } + +- spin_unlock_irqrestore(&ath724x_pci_lock, flags); ++ spin_unlock_irqrestore(&ar724x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; + } + +-static struct pci_ops ath724x_pci_ops = { +- .read = ath724x_pci_read, +- .write = ath724x_pci_write, ++static struct pci_ops ar724x_pci_ops = { ++ .read = ar724x_pci_read, ++ .write = ar724x_pci_write, + }; + +-static struct resource ath724x_io_resource = { ++static struct resource ar724x_io_resource = { + .name = "PCI IO space", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO, + }; + +-static struct resource ath724x_mem_resource = { ++static struct resource ar724x_mem_resource = { + .name = "PCI memory space", +- .start = ATH724X_PCI_MEM_BASE, +- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1, ++ .start = AR724X_PCI_MEM_BASE, ++ .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }; + +-static struct pci_controller ath724x_pci_controller = { +- .pci_ops = &ath724x_pci_ops, +- .io_resource = &ath724x_io_resource, +- .mem_resource = &ath724x_mem_resource, ++static struct pci_controller ar724x_pci_controller = { ++ .pci_ops = &ar724x_pci_ops, ++ .io_resource = &ar724x_io_resource, ++ .mem_resource = &ar724x_mem_resource, + }; + +-int __init ath724x_pcibios_init(void) ++int __init ar724x_pcibios_init(void) + { +- register_pci_controller(&ath724x_pci_controller); ++ register_pci_controller(&ar724x_pci_controller); + + return PCIBIOS_SUCCESSFUL; + } diff --git a/target/linux/ar71xx/patches-3.2/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch b/target/linux/ar71xx/patches-3.2/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch new file mode 100644 index 0000000000..adc7f18713 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch @@ -0,0 +1,132 @@ +From db464f2ad82c03f847d8eabbb8251b5c567e6720 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 11:52:41 +0100 +Subject: [PATCH 08/35] MIPS: ath79: use io-accessor macros in pci-ar724x.c +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: René Bolldorf <xsecute@googlemail.com> + +v4: - add an Acked-by tag from René +v3: - no changes +v2: - no changes +--- + arch/mips/pci/pci-ar724x.c | 38 ++++++++++++++++++++++++-------------- + 1 files changed, 24 insertions(+), 14 deletions(-) + +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -11,19 +11,19 @@ + #include <linux/pci.h> + #include <asm/mach-ath79/pci.h> + +-#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) +-#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) +- +-#define AR724X_PCI_DEV_BASE 0x14000000 ++#define AR724X_PCI_CFG_BASE 0x14000000 ++#define AR724X_PCI_CFG_SIZE 0x1000 + #define AR724X_PCI_MEM_BASE 0x10000000 + #define AR724X_PCI_MEM_SIZE 0x08000000 + + static DEFINE_SPINLOCK(ar724x_pci_lock); ++static void __iomem *ar724x_pci_devcfg_base; + + static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *value) + { + unsigned long flags, addr, tval, mask; ++ void __iomem *base; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; +@@ -31,25 +31,27 @@ static int ar724x_pci_read(struct pci_bu + if (where & (size - 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + ++ base = ar724x_pci_devcfg_base; ++ + spin_lock_irqsave(&ar724x_pci_lock, flags); + + switch (size) { + case 1: + addr = where & ~3; + mask = 0xff000000 >> ((where % 4) * 8); +- tval = reg_read(AR724X_PCI_DEV_BASE + addr); ++ tval = __raw_readl(base + addr); + tval = tval & ~mask; + *value = (tval >> ((4 - (where % 4))*8)); + break; + case 2: + addr = where & ~3; + mask = 0xffff0000 >> ((where % 4)*8); +- tval = reg_read(AR724X_PCI_DEV_BASE + addr); ++ tval = __raw_readl(base + addr); + tval = tval & ~mask; + *value = (tval >> ((4 - (where % 4))*8)); + break; + case 4: +- *value = reg_read(AR724X_PCI_DEV_BASE + where); ++ *value = __raw_readl(base + where); + break; + default: + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +@@ -66,6 +68,7 @@ static int ar724x_pci_write(struct pci_b + int size, uint32_t value) + { + unsigned long flags, tval, addr, mask; ++ void __iomem *base; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; +@@ -73,27 +76,29 @@ static int ar724x_pci_write(struct pci_b + if (where & (size - 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + ++ base = ar724x_pci_devcfg_base; ++ + spin_lock_irqsave(&ar724x_pci_lock, flags); + + switch (size) { + case 1: +- addr = (AR724X_PCI_DEV_BASE + where) & ~3; ++ addr = where & ~3; + mask = 0xff000000 >> ((where % 4)*8); +- tval = reg_read(addr); ++ tval = __raw_readl(base + addr); + tval = tval & ~mask; + tval |= (value << ((4 - (where % 4))*8)) & mask; +- reg_write(addr, tval); ++ __raw_writel(tval, base + addr); + break; + case 2: +- addr = (AR724X_PCI_DEV_BASE + where) & ~3; ++ addr = where & ~3; + mask = 0xffff0000 >> ((where % 4)*8); +- tval = reg_read(addr); ++ tval = __raw_readl(base + addr); + tval = tval & ~mask; + tval |= (value << ((4 - (where % 4))*8)) & mask; +- reg_write(addr, tval); ++ __raw_writel(tval, base + addr); + break; + case 4: +- reg_write((AR724X_PCI_DEV_BASE + where), value); ++ __raw_writel(value, (base + where)); + break; + default: + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +@@ -133,6 +138,11 @@ static struct pci_controller ar724x_pci_ + + int __init ar724x_pcibios_init(void) + { ++ ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE, ++ AR724X_PCI_CFG_SIZE); ++ if (ar724x_pci_devcfg_base == NULL) ++ return -ENOMEM; ++ + register_pci_controller(&ar724x_pci_controller); + + return PCIBIOS_SUCCESSFUL; diff --git a/target/linux/ar71xx/patches-3.2/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch b/target/linux/ar71xx/patches-3.2/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch new file mode 100644 index 0000000000..1fb03c6cdf --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch @@ -0,0 +1,37 @@ +From 744ffdd4e90cd6671f46eadf9d7cf55b07618d73 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 21:37:17 +0100 +Subject: [PATCH 09/35] MIPS: ath79: remove superfluous alignment checks from pci-ar724x.c + +The alignment of the 'where' parameters are checked +in the core PCI code already. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes +--- + arch/mips/pci/pci-ar724x.c | 6 ------ + 1 files changed, 0 insertions(+), 6 deletions(-) + +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -28,9 +28,6 @@ static int ar724x_pci_read(struct pci_bu + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; + +- if (where & (size - 1)) +- return PCIBIOS_BAD_REGISTER_NUMBER; +- + base = ar724x_pci_devcfg_base; + + spin_lock_irqsave(&ar724x_pci_lock, flags); +@@ -73,9 +70,6 @@ static int ar724x_pci_write(struct pci_b + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; + +- if (where & (size - 1)) +- return PCIBIOS_BAD_REGISTER_NUMBER; +- + base = ar724x_pci_devcfg_base; + + spin_lock_irqsave(&ar724x_pci_lock, flags); diff --git a/target/linux/ar71xx/patches-3.2/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch b/target/linux/ar71xx/patches-3.2/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch new file mode 100644 index 0000000000..c3637e8eca --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch @@ -0,0 +1,219 @@ +From 2e535c334018d58b0bf6df583486abda5bfb2003 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 18 Nov 2011 22:25:30 +0100 +Subject: [PATCH 10/35] MIPS: ath79: fix broken ar724x_pci_{read,write} functions + +The current ar724x_pci_{read,write} functions are +broken. Due to that, pci_read_config_byte returns +with bogus values, and pci_write_config_{byte,word} +unconditionally clears the accessed PCI configuration +registers instead of changing the value of them. + +The patch fixes the broken functions, thus the PCI +configuration space can be accessed correctly. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes + +Output of 'lspci -vv' without the patch: + +00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless +Network Adapter (PCI-Express) (rev 01) + Subsystem: Atheros Communications Inc. Device a091 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin A routed to IRQ 0 + Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K] + Capabilities: [40] Power Management version 3 + Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) + Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- + Address: 00000000 Data: 0000 + Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us + ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- + RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 512 bytes + DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- + LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us + ClockPM- Surprise- LLActRep- BwNot- + LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + DevCap2: Completion Timeout: Not Supported, TimeoutDis+ + DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- + LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB + Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- + Compliance De-emphasis: -6dB + LnkSta2: Current De-emphasis Level: -6dB + +Output of 'lspci -vv' with the patch: + +00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless +Network Adapter (PCI-Express) (rev 01) + Subsystem: Atheros Communications Inc. Device a091 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin A routed to IRQ 48 + Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K] + Capabilities: [40] Power Management version 3 + Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) + Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- + Address: 00000000 Data: 0000 + Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us + ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- + RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 512 bytes + DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- + LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us + ClockPM- Surprise- LLActRep- BwNot- + LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- + ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + DevCap2: Completion Timeout: Not Supported, TimeoutDis+ + DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- + LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB + Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- + Compliance De-emphasis: -6dB + LnkSta2: Current De-emphasis Level: -6dB + Capabilities: [100 v1] Advanced Error Reporting + UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- + UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- + UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- + CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- + CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ + AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- + Capabilities: [140 v1] Virtual Channel + Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 + Arb: Fixed- WRR32- WRR64- WRR128- + Ctrl: ArbSelect=Fixed + Status: InProgress- + VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- + Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- + Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff + Status: NegoPending- InProgress- + Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12 + Capabilities: [170 v1] Power Budgeting <?> +--- + arch/mips/pci/pci-ar724x.c | 52 ++++++++++++++++++++++---------------------- + 1 files changed, 26 insertions(+), 26 deletions(-) + +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -22,8 +22,9 @@ static void __iomem *ar724x_pci_devcfg_b + static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *value) + { +- unsigned long flags, addr, tval, mask; ++ unsigned long flags; + void __iomem *base; ++ u32 data; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; +@@ -31,24 +32,22 @@ static int ar724x_pci_read(struct pci_bu + base = ar724x_pci_devcfg_base; + + spin_lock_irqsave(&ar724x_pci_lock, flags); ++ data = __raw_readl(base + (where & ~3)); + + switch (size) { + case 1: +- addr = where & ~3; +- mask = 0xff000000 >> ((where % 4) * 8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- *value = (tval >> ((4 - (where % 4))*8)); ++ if (where & 1) ++ data >>= 8; ++ if (where & 2) ++ data >>= 16; ++ data &= 0xff; + break; + case 2: +- addr = where & ~3; +- mask = 0xffff0000 >> ((where % 4)*8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- *value = (tval >> ((4 - (where % 4))*8)); ++ if (where & 2) ++ data >>= 16; ++ data &= 0xffff; + break; + case 4: +- *value = __raw_readl(base + where); + break; + default: + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +@@ -57,6 +56,7 @@ static int ar724x_pci_read(struct pci_bu + } + + spin_unlock_irqrestore(&ar724x_pci_lock, flags); ++ *value = data; + + return PCIBIOS_SUCCESSFUL; + } +@@ -64,8 +64,10 @@ static int ar724x_pci_read(struct pci_bu + static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t value) + { +- unsigned long flags, tval, addr, mask; ++ unsigned long flags; + void __iomem *base; ++ u32 data; ++ int s; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; +@@ -73,26 +75,21 @@ static int ar724x_pci_write(struct pci_b + base = ar724x_pci_devcfg_base; + + spin_lock_irqsave(&ar724x_pci_lock, flags); ++ data = __raw_readl(base + (where & ~3)); + + switch (size) { + case 1: +- addr = where & ~3; +- mask = 0xff000000 >> ((where % 4)*8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- tval |= (value << ((4 - (where % 4))*8)) & mask; +- __raw_writel(tval, base + addr); ++ s = ((where & 3) * 8); ++ data &= ~(0xff << s); ++ data |= ((value & 0xff) << s); + break; + case 2: +- addr = where & ~3; +- mask = 0xffff0000 >> ((where % 4)*8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- tval |= (value << ((4 - (where % 4))*8)) & mask; +- __raw_writel(tval, base + addr); ++ s = ((where & 2) * 8); ++ data &= ~(0xffff << s); ++ data |= ((value & 0xffff) << s); + break; + case 4: +- __raw_writel(value, (base + where)); ++ data = value; + break; + default: + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +@@ -100,6 +97,9 @@ static int ar724x_pci_write(struct pci_b + return PCIBIOS_BAD_REGISTER_NUMBER; + } + ++ __raw_writel(data, base + (where & ~3)); ++ /* flush write */ ++ __raw_readl(base + (where & ~3)); + spin_unlock_irqrestore(&ar724x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; diff --git a/target/linux/ar71xx/patches-3.2/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch b/target/linux/ar71xx/patches-3.2/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch new file mode 100644 index 0000000000..11391abe69 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch @@ -0,0 +1,134 @@ +From b2ee3bd8706521c9bbf43405c767010927c101e5 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 21 Nov 2011 17:57:51 +0100 +Subject: [PATCH 11/35] MIPS: ath79: add a workaround for a PCI controller bug in AR7240 SoCs + +The PCI controller of the AR724X SoCs has a hardware +bag. If the BAR0 register of the PCI device is set to +the proper base address, the memory address space of +the device is not accessible. + +When the device driver tries to access the memory +address space of the PCI device, it leads to data +bus error, similiar to this: + +Data bus error, epc == 801f69a0, ra == 801f698c +Oops[#1]: +Cpu 0 +$ 0 : 00000000 00000061 deadbeef 000000ff +$ 4 : 00000000 000000ff 00000014 00000000 +$ 8 : ff000000 fffffffc 00000000 00000000 +$12 : 000001f5 00000006 00000000 6e637920 +$16 : 81ca4000 81ca0260 81ca4000 804d70f0 +$20 : fffffff4 0000002b 803ad4c4 00000000 +$24 : 00000003 00000000 +$28 : 81c20000 81c21c60 00000000 801f698c +Hi : 00000000 +Lo : 00000000 +epc : 801f69a0 ath9k_hw_init+0xd0/0xa70 + Not tainted +ra : 801f698c ath9k_hw_init+0xbc/0xa70 +Status: 1000c103 KERNEL EXL IE +Cause : 1080001c +PrId : 00019374 (MIPS 24Kc) +Modules linked in: +Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000) +Stack : 00000000 00000000 00000000 00000000 81c21c78 81ca0260 00000000 804d70f0 + 81ca0260 81c21cc0 81ca0e80 81ca0260 81ca4000 804d70f0 fffffff4 0000002b + 803ad4c4 00000000 00000000 801e3ae8 81c9d080 81ca0e80 b0000000 800b9b9c + 00000008 81c9d000 8031aeb0 802d38a0 00000000 81c14c00 81c14c60 00000000 + 81ca0e80 81ca0260 b0000000 801f08a4 81c9c820 81c21d48 81c9c820 80144320 + ... +Call Trace: +[<801f69a0>] ath9k_hw_init+0xd0/0xa70 +[<801e3ae8>] ath9k_init_device+0x174/0x680 +[<801f08a4>] ath_pci_probe+0x27c/0x380 +[<8019e490>] pci_device_probe+0x74/0x9c +[<801bfadc>] driver_probe_device+0x9c/0x1b4 +[<801bfcb0>] __driver_attach+0xbc/0xc4 +[<801bea0c>] bus_for_each_dev+0x5c/0x98 +[<801bf394>] bus_add_driver+0x1d0/0x2a4 +[<801c0364>] driver_register+0x8c/0x16c +[<8019e72c>] __pci_register_driver+0x4c/0xe4 +[<803d3d40>] ath9k_init+0x3c/0x88 +[<80060930>] do_one_initcall+0x3c/0x1cc +[<803c297c>] kernel_init+0xa4/0x138 +[<80063c04>] kernel_thread_helper+0x10/0x18 + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - apply the workaround on AR7240 only + - remove unrelated defines +--- + arch/mips/pci/pci-ar724x.c | 36 +++++++++++++++++++++++++++++++++++- + 1 files changed, 35 insertions(+), 1 deletions(-) + +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -9,6 +9,7 @@ + */ + + #include <linux/pci.h> ++#include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/pci.h> + + #define AR724X_PCI_CFG_BASE 0x14000000 +@@ -16,9 +17,14 @@ + #define AR724X_PCI_MEM_BASE 0x10000000 + #define AR724X_PCI_MEM_SIZE 0x08000000 + ++#define AR7240_BAR0_WAR_VALUE 0xffff ++ + static DEFINE_SPINLOCK(ar724x_pci_lock); + static void __iomem *ar724x_pci_devcfg_base; + ++static u32 ar724x_pci_bar0_value; ++static bool ar724x_pci_bar0_is_cached; ++ + static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *value) + { +@@ -56,7 +62,14 @@ static int ar724x_pci_read(struct pci_bu + } + + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +- *value = data; ++ ++ if (where == PCI_BASE_ADDRESS_0 && size == 4 && ++ ar724x_pci_bar0_is_cached) { ++ /* use the cached value */ ++ *value = ar724x_pci_bar0_value; ++ } else { ++ *value = data; ++ } + + return PCIBIOS_SUCCESSFUL; + } +@@ -72,6 +85,27 @@ static int ar724x_pci_write(struct pci_b + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; + ++ if (soc_is_ar7240() && where == PCI_BASE_ADDRESS_0 && size == 4) { ++ if (value != 0xffffffff) { ++ /* ++ * WAR for a hw issue. If the BAR0 register of the ++ * device is set to the proper base address, the ++ * memory space of the device is not accessible. ++ * ++ * Cache the intended value so it can be read back, ++ * and write a SoC specific constant value to the ++ * BAR0 register in order to make the device memory ++ * accessible. ++ */ ++ ar724x_pci_bar0_is_cached = true; ++ ar724x_pci_bar0_value = value; ++ ++ value = AR7240_BAR0_WAR_VALUE; ++ } else { ++ ar724x_pci_bar0_is_cached = false; ++ } ++ } ++ + base = ar724x_pci_devcfg_base; + + spin_lock_irqsave(&ar724x_pci_lock, flags); diff --git a/target/linux/ar71xx/patches-3.2/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch b/target/linux/ar71xx/patches-3.2/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch new file mode 100644 index 0000000000..ccb721d366 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch @@ -0,0 +1,75 @@ +From cfb725275ea25857e8f0e3bf358fff7c84cc787c Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Tue, 22 Nov 2011 13:59:39 +0100 +Subject: [PATCH 12/35] MIPS: ath79: fix a wrong IRQ number + +The Ubiquiti XM board setup code uses an invalid +IRQ number, because it if above of NR_IRQS. This +leads to failed 'request_irq' calls: + + ath9k 0000:00:00.0: request_irq failed + ath9k: probe of 0000:00:00.0 failed with error -22 + +Preserve some IRQ numbers for the built-in IRQ +controller of PCI host controllers in the +AR71XX/AR724X SoCs, and use the correct IRQ +number in the board setup code. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes + +The IRQ controller code is also missing, that will be +added in a separate patch. +--- + arch/mips/ath79/mach-ubnt-xm.c | 5 +++-- + arch/mips/include/asm/mach-ath79/irq.h | 6 +++++- + 2 files changed, 8 insertions(+), 3 deletions(-) + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -17,6 +17,8 @@ + #include <linux/ath9k_platform.h> + #endif /* CONFIG_PCI */ + ++#include <asm/mach-ath79/irq.h> ++ + #include "machtypes.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" +@@ -33,7 +35,6 @@ + #define UBNT_XM_KEYS_POLL_INTERVAL 20 + #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) + +-#define UBNT_XM_PCI_IRQ 48 + #define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) + + static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { +@@ -86,7 +87,7 @@ static struct ath9k_platform_data ubnt_x + + static struct ar724x_pci_data ubnt_xm_pci_data[] = { + { +- .irq = UBNT_XM_PCI_IRQ, ++ .irq = ATH79_PCI_IRQ(0), + .pdata = &ubnt_xm_eeprom_data, + }, + }; +--- a/arch/mips/include/asm/mach-ath79/irq.h ++++ b/arch/mips/include/asm/mach-ath79/irq.h +@@ -10,11 +10,15 @@ + #define __ASM_MACH_ATH79_IRQ_H + + #define MIPS_CPU_IRQ_BASE 0 +-#define NR_IRQS 40 ++#define NR_IRQS 46 + + #define ATH79_MISC_IRQ_BASE 8 + #define ATH79_MISC_IRQ_COUNT 32 + ++#define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT) ++#define ATH79_PCI_IRQ_COUNT 6 ++#define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x)) ++ + #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2) + #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3) + #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4) diff --git a/target/linux/ar71xx/patches-3.2/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch b/target/linux/ar71xx/patches-3.2/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch new file mode 100644 index 0000000000..6da2df4993 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch @@ -0,0 +1,213 @@ +From a4fbc2dec67a5d760e25e3c3a6c392191a5405c6 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Tue, 22 Nov 2011 14:11:19 +0100 +Subject: [PATCH 13/35] MIPS: ath79: add PCI IRQ handling code for AR724X SoCs + +The PCI Host Controller of the AR724x SoC has a +built-in IRQ controller. The current code does +not supports that, so the IRQ lines wired to this +controller are not usable. This leads to failed +'request_irq' calls: + + ath9k 0000:00:00.0: request_irq failed + ath9k: probe of 0000:00:00.0 failed with error -89 + +This patch adds support for the IRQ controller +in order to make PCI IRQs work. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - move the interrupt controller related defines from + the workaround patch +--- + arch/mips/ath79/pci.c | 3 +- + arch/mips/include/asm/mach-ath79/pci.h | 4 +- + arch/mips/pci/pci-ar724x.c | 118 +++++++++++++++++++++++++++++++- + 3 files changed, 120 insertions(+), 5 deletions(-) + +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -10,6 +10,7 @@ + + #include <linux/pci.h> + #include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/irq.h> + #include <asm/mach-ath79/pci.h> + #include "pci.h" + +@@ -50,7 +51,7 @@ int pcibios_plat_dev_init(struct pci_dev + int __init ath79_register_pci(void) + { + if (soc_is_ar724x()) +- return ar724x_pcibios_init(); ++ return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2); + + return -ENODEV; + } +--- a/arch/mips/include/asm/mach-ath79/pci.h ++++ b/arch/mips/include/asm/mach-ath79/pci.h +@@ -12,9 +12,9 @@ + #define __ASM_MACH_ATH79_PCI_H + + #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) +-int ar724x_pcibios_init(void); ++int ar724x_pcibios_init(int irq); + #else +-static inline int ar724x_pcibios_init(void) { return 0 }; ++static inline int ar724x_pcibios_init(int irq) { return 0 }; + #endif + + #endif /* __ASM_MACH_ATH79_PCI_H */ +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -8,19 +8,32 @@ + * by the Free Software Foundation. + */ + ++#include <linux/irq.h> + #include <linux/pci.h> + #include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/ar71xx_regs.h> + #include <asm/mach-ath79/pci.h> + + #define AR724X_PCI_CFG_BASE 0x14000000 + #define AR724X_PCI_CFG_SIZE 0x1000 ++#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) ++#define AR724X_PCI_CTRL_SIZE 0x100 ++ + #define AR724X_PCI_MEM_BASE 0x10000000 + #define AR724X_PCI_MEM_SIZE 0x08000000 + ++#define AR724X_PCI_REG_INT_STATUS 0x4c ++#define AR724X_PCI_REG_INT_MASK 0x50 ++ ++#define AR724X_PCI_INT_DEV0 BIT(14) ++ ++#define AR724X_PCI_IRQ_COUNT 1 ++ + #define AR7240_BAR0_WAR_VALUE 0xffff + + static DEFINE_SPINLOCK(ar724x_pci_lock); + static void __iomem *ar724x_pci_devcfg_base; ++static void __iomem *ar724x_pci_ctrl_base; + + static u32 ar724x_pci_bar0_value; + static bool ar724x_pci_bar0_is_cached; +@@ -164,14 +177,115 @@ static struct pci_controller ar724x_pci_ + .mem_resource = &ar724x_mem_resource, + }; + +-int __init ar724x_pcibios_init(void) ++static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) ++{ ++ void __iomem *base; ++ u32 pending; ++ ++ base = ar724x_pci_ctrl_base; ++ ++ pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & ++ __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ ++ if (pending & AR724X_PCI_INT_DEV0) ++ generic_handle_irq(ATH79_PCI_IRQ(0)); ++ ++ else ++ spurious_interrupt(); ++} ++ ++static void ar724x_pci_irq_unmask(struct irq_data *d) ++{ ++ void __iomem *base; ++ u32 t; ++ ++ base = ar724x_pci_ctrl_base; ++ ++ switch (d->irq) { ++ case ATH79_PCI_IRQ(0): ++ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ __raw_writel(t | AR724X_PCI_INT_DEV0, ++ base + AR724X_PCI_REG_INT_MASK); ++ /* flush write */ ++ __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ } ++} ++ ++static void ar724x_pci_irq_mask(struct irq_data *d) ++{ ++ void __iomem *base; ++ u32 t; ++ ++ base = ar724x_pci_ctrl_base; ++ ++ switch (d->irq) { ++ case ATH79_PCI_IRQ(0): ++ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ __raw_writel(t & ~AR724X_PCI_INT_DEV0, ++ base + AR724X_PCI_REG_INT_MASK); ++ ++ /* flush write */ ++ __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ ++ t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS); ++ __raw_writel(t | AR724X_PCI_INT_DEV0, ++ base + AR724X_PCI_REG_INT_STATUS); ++ ++ /* flush write */ ++ __raw_readl(base + AR724X_PCI_REG_INT_STATUS); ++ } ++} ++ ++static struct irq_chip ar724x_pci_irq_chip = { ++ .name = "AR724X PCI ", ++ .irq_mask = ar724x_pci_irq_mask, ++ .irq_unmask = ar724x_pci_irq_unmask, ++ .irq_mask_ack = ar724x_pci_irq_mask, ++}; ++ ++static void __init ar724x_pci_irq_init(int irq) ++{ ++ void __iomem *base; ++ int i; ++ ++ base = ar724x_pci_ctrl_base; ++ ++ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); ++ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); ++ ++ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT); ++ ++ for (i = ATH79_PCI_IRQ_BASE; ++ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, ++ handle_level_irq); ++ ++ irq_set_chained_handler(irq, ar724x_pci_irq_handler); ++} ++ ++int __init ar724x_pcibios_init(int irq) + { ++ int ret; ++ ++ ret = -ENOMEM; ++ + ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE, + AR724X_PCI_CFG_SIZE); + if (ar724x_pci_devcfg_base == NULL) +- return -ENOMEM; ++ goto err; + ++ ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE, ++ AR724X_PCI_CTRL_SIZE); ++ if (ar724x_pci_ctrl_base == NULL) ++ goto err_unmap_devcfg; ++ ++ ar724x_pci_irq_init(irq); + register_pci_controller(&ar724x_pci_controller); + + return PCIBIOS_SUCCESSFUL; ++ ++err_unmap_devcfg: ++ iounmap(ar724x_pci_devcfg_base); ++err: ++ return ret; + } diff --git a/target/linux/ar71xx/patches-3.2/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch b/target/linux/ar71xx/patches-3.2/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch new file mode 100644 index 0000000000..17776ada90 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch @@ -0,0 +1,63 @@ +From adeefb0860e92f44c7d66d5fccdb217fccfb8a81 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 20 Nov 2011 10:19:08 +0100 +Subject: [PATCH 14/35] MIPS: ath79: get rid of some ifdefs in mach-ubnt-xm.c + +Remove a superfluous ifdef around an include. Also +reorganize the board setup code a bit, so another +ifdef can be removed. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes +--- + arch/mips/ath79/mach-ubnt-xm.c | 23 ++++++++++++----------- + 1 files changed, 12 insertions(+), 11 deletions(-) + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -12,10 +12,7 @@ + + #include <linux/init.h> + #include <linux/pci.h> +- +-#ifdef CONFIG_PCI + #include <linux/ath9k_platform.h> +-#endif /* CONFIG_PCI */ + + #include <asm/mach-ath79/irq.h> + +@@ -91,6 +88,17 @@ static struct ar724x_pci_data ubnt_xm_pc + .pdata = &ubnt_xm_eeprom_data, + }, + }; ++ ++static void __init ubnt_xm_pci_init(void) ++{ ++ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, ++ sizeof(ubnt_xm_eeprom_data.eeprom_data)); ++ ++ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); ++ ath79_register_pci(); ++} ++#else ++static inline void ubnt_xm_pci_init(void) {} + #endif /* CONFIG_PCI */ + + static void __init ubnt_xm_init(void) +@@ -105,14 +113,7 @@ static void __init ubnt_xm_init(void) + ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, + ARRAY_SIZE(ubnt_xm_spi_info)); + +-#ifdef CONFIG_PCI +- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, +- sizeof(ubnt_xm_eeprom_data.eeprom_data)); +- +- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); +-#endif /* CONFIG_PCI */ +- +- ath79_register_pci(); ++ ubnt_xm_pci_init(); + } + + MIPS_MACHINE(ATH79_MACH_UBNT_XM, diff --git a/target/linux/ar71xx/patches-3.2/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch b/target/linux/ar71xx/patches-3.2/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch new file mode 100644 index 0000000000..4a5ec6c93f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch @@ -0,0 +1,143 @@ +From 83d74abc7d549f5d6292b0474be080983239c0bd Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 20 Nov 2011 10:29:36 +0100 +Subject: [PATCH 15/35] MIPS: ath79: allow to use board specific pci_plat_dev_init functions + +Th current implementation causes NULL pointer dereference +if 'pci_data' is not set: + +pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit] +pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI +address [0x10000000-0x1000ffff]) +CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4 +Oops[#1]: +Cpu 0 +$ 0 : 00000000 80420000 00000000 00000000 +$ 4 : 00000000 00000000 00000001 00000001 +$ 8 : 00000001 0000032c 81c54700 00000001 +$12 : 0000032d 0000000f 00000000 ffffffff +$16 : 81c14c00 00000001 802dac74 80195f98 +$20 : 802ea050 00000000 00000000 00000000 +$24 : 00000003 800617f0 +$28 : 81c20000 81c21e70 00000000 802e78a4 +Hi : 00000000 +Lo : 4190ab00 +epc : 802daca0 0x802daca0 + Not tainted +ra : 802e78a4 0x802e78a4 +Status: 1000c003 KERNEL EXL IE +Cause : 00800008 +BadVA : 00000000 +PrId : 00019374 (MIPS 24Kc) +Modules linked in: +Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000) +Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000 + 802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290 + 80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000 + 00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000 + 00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000 + +This can be avoided by calling the 'ar724x_pci_add_data' +function from the board specific setup code. However it +makes no sense to use that function for every board, +especially when the board does not needs to set the +platform_data field of any PCI device. + +The patch allows the board setup code to specify a board +specific function if that is required. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes + +The pci_irq_map function can throw another NULL pointer +dereference, that will be fixed in a subsequent patch. +--- + arch/mips/ath79/mach-ubnt-xm.c | 13 ++++++++++++- + arch/mips/ath79/pci.c | 14 ++++++++------ + arch/mips/ath79/pci.h | 4 +++- + 3 files changed, 23 insertions(+), 8 deletions(-) + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -85,16 +85,27 @@ static struct ath9k_platform_data ubnt_x + static struct ar724x_pci_data ubnt_xm_pci_data[] = { + { + .irq = ATH79_PCI_IRQ(0), +- .pdata = &ubnt_xm_eeprom_data, + }, + }; + ++static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ switch (PCI_SLOT(dev->devfn)) { ++ case 0: ++ dev->dev.platform_data = &ubnt_xm_eeprom_data; ++ break; ++ } ++ ++ return 0; ++} ++ + static void __init ubnt_xm_pci_init(void) + { + memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, + sizeof(ubnt_xm_eeprom_data.eeprom_data)); + + ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); ++ ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); + ath79_register_pci(); + } + #else +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -14,6 +14,7 @@ + #include <asm/mach-ath79/pci.h> + #include "pci.h" + ++static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); + static struct ar724x_pci_data *pci_data; + static int pci_data_size; + +@@ -38,14 +39,15 @@ int __init pcibios_map_irq(const struct + + int pcibios_plat_dev_init(struct pci_dev *dev) + { +- unsigned int devfn = dev->devfn; +- +- if (devfn > pci_data_size - 1) +- return PCIBIOS_DEVICE_NOT_FOUND; ++ if (ath79_pci_plat_dev_init) ++ return ath79_pci_plat_dev_init(dev); + +- dev->dev.platform_data = pci_data[devfn].pdata; ++ return 0; ++} + +- return PCIBIOS_SUCCESSFUL; ++void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)) ++{ ++ ath79_pci_plat_dev_init = func; + } + + int __init ath79_register_pci(void) +--- a/arch/mips/ath79/pci.h ++++ b/arch/mips/ath79/pci.h +@@ -13,14 +13,16 @@ + + struct ar724x_pci_data { + int irq; +- void *pdata; + }; + + void ar724x_pci_add_data(struct ar724x_pci_data *data, int size); + + #ifdef CONFIG_PCI ++void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)); + int ath79_register_pci(void); + #else ++static inline void ++ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {} + static inline int ath79_register_pci(void) { return 0; } + #endif + diff --git a/target/linux/ar71xx/patches-3.2/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch b/target/linux/ar71xx/patches-3.2/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch new file mode 100644 index 0000000000..78e8bd56c6 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch @@ -0,0 +1,435 @@ +From 9f6d46372cf2a493eaeeffbefe0a796379f838fa Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Tue, 22 Nov 2011 22:54:32 +0100 +Subject: [PATCH 16/35] MIPS: ath79: add support for the PCI host controller of the AR71XX SoCs + +The Atheros AR71XX SoCs have a built-in PCI Host Controller. +This patch adds a driver for that, and modifies the relevant +files in order to allow to register the PCI controller from +board specific setup. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + +v2: - add missing pci-ar71xx.c +--- + arch/mips/ath79/Kconfig | 1 + + arch/mips/include/asm/mach-ath79/pci.h | 6 + + arch/mips/pci/Makefile | 1 + + arch/mips/pci/pci-ar71xx.c | 375 ++++++++++++++++++++++++++++++++ + 4 files changed, 383 insertions(+), 0 deletions(-) + create mode 100644 arch/mips/pci/pci-ar71xx.c + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -52,6 +52,7 @@ endmenu + config SOC_AR71XX + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI ++ select HW_HAS_PCI + def_bool n + + config SOC_AR724X +--- a/arch/mips/include/asm/mach-ath79/pci.h ++++ b/arch/mips/include/asm/mach-ath79/pci.h +@@ -11,6 +11,12 @@ + #ifndef __ASM_MACH_ATH79_PCI_H + #define __ASM_MACH_ATH79_PCI_H + ++#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX) ++int ar71xx_pcibios_init(void); ++#else ++static inline int ar71xx_pcibios_init(void) { return 0 }; ++#endif ++ + #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) + int ar724x_pcibios_init(int irq); + #else +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o + obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o ++obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o + obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o + + # +--- /dev/null ++++ b/arch/mips/pci/pci-ar71xx.c +@@ -0,0 +1,375 @@ ++/* ++ * Atheros AR71xx PCI host controller driver ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/resource.h> ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/bitops.h> ++#include <linux/pci.h> ++#include <linux/pci_regs.h> ++#include <linux/interrupt.h> ++ ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/pci.h> ++ ++#define AR71XX_PCI_MEM_BASE 0x10000000 ++#define AR71XX_PCI_MEM_SIZE 0x08000000 ++ ++#define AR71XX_PCI_WIN0_OFFS 0x10000000 ++#define AR71XX_PCI_WIN1_OFFS 0x11000000 ++#define AR71XX_PCI_WIN2_OFFS 0x12000000 ++#define AR71XX_PCI_WIN3_OFFS 0x13000000 ++#define AR71XX_PCI_WIN4_OFFS 0x14000000 ++#define AR71XX_PCI_WIN5_OFFS 0x15000000 ++#define AR71XX_PCI_WIN6_OFFS 0x16000000 ++#define AR71XX_PCI_WIN7_OFFS 0x07000000 ++ ++#define AR71XX_PCI_CFG_BASE \ ++ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) ++#define AR71XX_PCI_CFG_SIZE 0x100 ++ ++#define AR71XX_PCI_REG_CRP_AD_CBE 0x00 ++#define AR71XX_PCI_REG_CRP_WRDATA 0x04 ++#define AR71XX_PCI_REG_CRP_RDDATA 0x08 ++#define AR71XX_PCI_REG_CFG_AD 0x0c ++#define AR71XX_PCI_REG_CFG_CBE 0x10 ++#define AR71XX_PCI_REG_CFG_WRDATA 0x14 ++#define AR71XX_PCI_REG_CFG_RDDATA 0x18 ++#define AR71XX_PCI_REG_PCI_ERR 0x1c ++#define AR71XX_PCI_REG_PCI_ERR_ADDR 0x20 ++#define AR71XX_PCI_REG_AHB_ERR 0x24 ++#define AR71XX_PCI_REG_AHB_ERR_ADDR 0x28 ++ ++#define AR71XX_PCI_CRP_CMD_WRITE 0x00010000 ++#define AR71XX_PCI_CRP_CMD_READ 0x00000000 ++#define AR71XX_PCI_CFG_CMD_READ 0x0000000a ++#define AR71XX_PCI_CFG_CMD_WRITE 0x0000000b ++ ++#define AR71XX_PCI_INT_CORE BIT(4) ++#define AR71XX_PCI_INT_DEV2 BIT(2) ++#define AR71XX_PCI_INT_DEV1 BIT(1) ++#define AR71XX_PCI_INT_DEV0 BIT(0) ++ ++#define AR71XX_PCI_IRQ_COUNT 5 ++ ++static DEFINE_SPINLOCK(ar71xx_pci_lock); ++static void __iomem *ar71xx_pcicfg_base; ++ ++/* Byte lane enable bits */ ++static const u8 ar71xx_pci_ble_table[4][4] = { ++ {0x0, 0xf, 0xf, 0xf}, ++ {0xe, 0xd, 0xb, 0x7}, ++ {0xc, 0xf, 0x3, 0xf}, ++ {0xf, 0xf, 0xf, 0xf}, ++}; ++ ++static const u32 ar71xx_pci_read_mask[8] = { ++ 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0 ++}; ++ ++static inline u32 ar71xx_pci_get_ble(int where, int size, int local) ++{ ++ u32 t; ++ ++ t = ar71xx_pci_ble_table[size & 3][where & 3]; ++ BUG_ON(t == 0xf); ++ t <<= (local) ? 20 : 4; ++ ++ return t; ++} ++ ++static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn, ++ int where) ++{ ++ u32 ret; ++ ++ if (!bus->number) { ++ /* type 0 */ ++ ret = (1 << PCI_SLOT(devfn)) | (PCI_FUNC(devfn) << 8) | ++ (where & ~3); ++ } else { ++ /* type 1 */ ++ ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) | ++ (PCI_FUNC(devfn) << 8) | (where & ~3) | 1; ++ } ++ ++ return ret; ++} ++ ++static int ar71xx_pci_check_error(int quiet) ++{ ++ void __iomem *base = ar71xx_pcicfg_base; ++ u32 pci_err; ++ u32 ahb_err; ++ ++ pci_err = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR) & 3; ++ if (pci_err) { ++ if (!quiet) { ++ u32 addr; ++ ++ addr = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR_ADDR); ++ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n", ++ "PCI", pci_err, addr); ++ } ++ ++ /* clear PCI error status */ ++ __raw_writel(pci_err, base + AR71XX_PCI_REG_PCI_ERR); ++ } ++ ++ ahb_err = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR) & 1; ++ if (ahb_err) { ++ if (!quiet) { ++ u32 addr; ++ ++ addr = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR_ADDR); ++ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n", ++ "AHB", ahb_err, addr); ++ } ++ ++ /* clear AHB error status */ ++ __raw_writel(ahb_err, base + AR71XX_PCI_REG_AHB_ERR); ++ } ++ ++ return !!(ahb_err | pci_err); ++} ++ ++static inline void ar71xx_pci_local_write(int where, int size, u32 value) ++{ ++ void __iomem *base = ar71xx_pcicfg_base; ++ u32 ad_cbe; ++ ++ value = value << (8 * (where & 3)); ++ ++ ad_cbe = AR71XX_PCI_CRP_CMD_WRITE | (where & ~3); ++ ad_cbe |= ar71xx_pci_get_ble(where, size, 1); ++ ++ __raw_writel(ad_cbe, base + AR71XX_PCI_REG_CRP_AD_CBE); ++ __raw_writel(value, base + AR71XX_PCI_REG_CRP_WRDATA); ++} ++ ++static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus, ++ unsigned int devfn, ++ int where, int size, u32 cmd) ++{ ++ void __iomem *base = ar71xx_pcicfg_base; ++ u32 addr; ++ ++ addr = ar71xx_pci_bus_addr(bus, devfn, where); ++ ++ __raw_writel(addr, base + AR71XX_PCI_REG_CFG_AD); ++ __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0), ++ base + AR71XX_PCI_REG_CFG_CBE); ++ ++ return ar71xx_pci_check_error(1); ++} ++ ++static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *value) ++{ ++ void __iomem *base = ar71xx_pcicfg_base; ++ unsigned long flags; ++ u32 data; ++ int err; ++ int ret; ++ ++ ret = PCIBIOS_SUCCESSFUL; ++ data = ~0; ++ ++ spin_lock_irqsave(&ar71xx_pci_lock, flags); ++ ++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, ++ AR71XX_PCI_CFG_CMD_READ); ++ if (err) ++ ret = PCIBIOS_DEVICE_NOT_FOUND; ++ else ++ data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA); ++ ++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags); ++ ++ *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7]; ++ ++ return ret; ++} ++ ++static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 value) ++{ ++ void __iomem *base = ar71xx_pcicfg_base; ++ unsigned long flags; ++ int err; ++ int ret; ++ ++ value = value << (8 * (where & 3)); ++ ret = PCIBIOS_SUCCESSFUL; ++ ++ spin_lock_irqsave(&ar71xx_pci_lock, flags); ++ ++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, ++ AR71XX_PCI_CFG_CMD_WRITE); ++ if (err) ++ ret = PCIBIOS_DEVICE_NOT_FOUND; ++ else ++ __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA); ++ ++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags); ++ ++ return ret; ++} ++ ++static struct pci_ops ar71xx_pci_ops = { ++ .read = ar71xx_pci_read_config, ++ .write = ar71xx_pci_write_config, ++}; ++ ++static struct resource ar71xx_pci_io_resource = { ++ .name = "PCI IO space", ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct resource ar71xx_pci_mem_resource = { ++ .name = "PCI memory space", ++ .start = AR71XX_PCI_MEM_BASE, ++ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, ++ .flags = IORESOURCE_MEM ++}; ++ ++static struct pci_controller ar71xx_pci_controller = { ++ .pci_ops = &ar71xx_pci_ops, ++ .mem_resource = &ar71xx_pci_mem_resource, ++ .io_resource = &ar71xx_pci_io_resource, ++}; ++ ++static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) ++{ ++ void __iomem *base = ath79_reset_base; ++ u32 pending; ++ ++ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & ++ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ ++ if (pending & AR71XX_PCI_INT_DEV0) ++ generic_handle_irq(ATH79_PCI_IRQ(0)); ++ ++ else if (pending & AR71XX_PCI_INT_DEV1) ++ generic_handle_irq(ATH79_PCI_IRQ(1)); ++ ++ else if (pending & AR71XX_PCI_INT_DEV2) ++ generic_handle_irq(ATH79_PCI_IRQ(2)); ++ ++ else if (pending & AR71XX_PCI_INT_CORE) ++ generic_handle_irq(ATH79_PCI_IRQ(4)); ++ ++ else ++ spurious_interrupt(); ++} ++ ++static void ar71xx_pci_irq_unmask(struct irq_data *d) ++{ ++ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE; ++ void __iomem *base = ath79_reset_base; ++ u32 t; ++ ++ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ ++ /* flush write */ ++ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++} ++ ++static void ar71xx_pci_irq_mask(struct irq_data *d) ++{ ++ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE; ++ void __iomem *base = ath79_reset_base; ++ u32 t; ++ ++ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ ++ /* flush write */ ++ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++} ++ ++static struct irq_chip ar71xx_pci_irq_chip = { ++ .name = "AR71XX PCI", ++ .irq_mask = ar71xx_pci_irq_mask, ++ .irq_unmask = ar71xx_pci_irq_unmask, ++ .irq_mask_ack = ar71xx_pci_irq_mask, ++}; ++ ++static __init void ar71xx_pci_irq_init(void) ++{ ++ void __iomem *base = ath79_reset_base; ++ int i; ++ ++ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); ++ ++ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT); ++ ++ for (i = ATH79_PCI_IRQ_BASE; ++ i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, ++ handle_level_irq); ++ ++ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler); ++} ++ ++static __init void ar71xx_pci_reset(void) ++{ ++ void __iomem *ddr_base = ath79_ddr_base; ++ ++ ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE); ++ mdelay(100); ++ ++ ath79_device_reset_clear(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE); ++ mdelay(100); ++ ++ __raw_writel(AR71XX_PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0); ++ __raw_writel(AR71XX_PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1); ++ __raw_writel(AR71XX_PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2); ++ __raw_writel(AR71XX_PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3); ++ __raw_writel(AR71XX_PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4); ++ __raw_writel(AR71XX_PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5); ++ __raw_writel(AR71XX_PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6); ++ __raw_writel(AR71XX_PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7); ++ ++ mdelay(100); ++} ++ ++__init int ar71xx_pcibios_init(void) ++{ ++ u32 t; ++ ++ ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE); ++ if (ar71xx_pcicfg_base == NULL) ++ return -ENOMEM; ++ ++ ar71xx_pci_reset(); ++ ++ /* setup COMMAND register */ ++ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE ++ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; ++ ar71xx_pci_local_write(PCI_COMMAND, 4, t); ++ ++ /* clear bus errors */ ++ ar71xx_pci_check_error(1); ++ ++ ar71xx_pci_irq_init(); ++ ++ register_pci_controller(&ar71xx_pci_controller); ++ ++ return 0; ++} diff --git a/target/linux/ar71xx/patches-3.2/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch b/target/linux/ar71xx/patches-3.2/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch new file mode 100644 index 0000000000..251de55e54 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch @@ -0,0 +1,164 @@ +From 8a1a5852aa7f8cfc027b2b0bb51cbbac4309e144 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 20 Nov 2011 14:32:09 +0100 +Subject: [PATCH 17/35] MIPS: ath79: allow to use SoC specific PCI IRQ maps + +The PCI controllers in the AR71XX and in the +AR724X SoCs are different, and both of them +uses different IRQ wiring. + +The patch modifies the 'pcibios_map_irq' function +in order to allow to use different IRQ maps for +the different SoCs. The patch also adds a function, +which lets the board setup code to override the +default IRQ map. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes +--- + arch/mips/ath79/pci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++--- + arch/mips/ath79/pci.h | 9 ++++++ + 2 files changed, 77 insertions(+), 4 deletions(-) + +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -8,6 +8,7 @@ + * by the Free Software Foundation. + */ + ++#include <linux/init.h> + #include <linux/pci.h> + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/irq.h> +@@ -15,9 +16,35 @@ + #include "pci.h" + + static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); ++static const struct ath79_pci_irq *ath79_pci_irq_map __initdata; ++static unsigned ath79_pci_nr_irqs __initdata; + static struct ar724x_pci_data *pci_data; + static int pci_data_size; + ++static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = { ++ { ++ .slot = 17, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(0), ++ }, { ++ .slot = 18, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(1), ++ }, { ++ .slot = 19, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(2), ++ } ++}; ++ ++static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(0), ++ } ++}; ++ + void ar724x_pci_add_data(struct ar724x_pci_data *data, int size) + { + pci_data = data; +@@ -26,13 +53,40 @@ void ar724x_pci_add_data(struct ar724x_p + + int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) + { +- unsigned int devfn = dev->devfn; + int irq = -1; ++ int i; + +- if (devfn > pci_data_size - 1) +- return irq; +- +- irq = pci_data[devfn].irq; ++ if (ath79_pci_nr_irqs == 0 || ++ ath79_pci_irq_map == NULL) { ++ if (soc_is_ar71xx()) { ++ ath79_pci_irq_map = ar71xx_pci_irq_map; ++ ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map); ++ } else if (soc_is_ar724x()) { ++ ath79_pci_irq_map = ar724x_pci_irq_map; ++ ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); ++ } else { ++ pr_crit("pci %s: invalid irq map\n", ++ pci_name((struct pci_dev *) dev)); ++ return irq; ++ } ++ } ++ ++ for (i = 0; i < ath79_pci_nr_irqs; i++) { ++ const struct ath79_pci_irq *entry; ++ ++ entry = &ath79_pci_irq_map[i]; ++ if (entry->slot == slot && entry->pin == pin) { ++ irq = entry->irq; ++ break; ++ } ++ } ++ ++ if (irq < 0) ++ pr_crit("pci %s: no irq found for pin %u\n", ++ pci_name((struct pci_dev *) dev), pin); ++ else ++ pr_info("pci %s: using irq %d for pin %u\n", ++ pci_name((struct pci_dev *) dev), irq, pin); + + return irq; + } +@@ -45,6 +99,13 @@ int pcibios_plat_dev_init(struct pci_dev + return 0; + } + ++void __init ath79_pci_set_irq_map(unsigned nr_irqs, ++ const struct ath79_pci_irq *map) ++{ ++ ath79_pci_nr_irqs = nr_irqs; ++ ath79_pci_irq_map = map; ++} ++ + void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)) + { + ath79_pci_plat_dev_init = func; +@@ -52,6 +113,9 @@ void __init ath79_pci_set_plat_dev_init( + + int __init ath79_register_pci(void) + { ++ if (soc_is_ar71xx()) ++ return ar71xx_pcibios_init(); ++ + if (soc_is_ar724x()) + return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2); + +--- a/arch/mips/ath79/pci.h ++++ b/arch/mips/ath79/pci.h +@@ -15,13 +15,22 @@ struct ar724x_pci_data { + int irq; + }; + ++struct ath79_pci_irq { ++ u8 slot; ++ u8 pin; ++ int irq; ++}; ++ + void ar724x_pci_add_data(struct ar724x_pci_data *data, int size); + + #ifdef CONFIG_PCI ++void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map); + void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)); + int ath79_register_pci(void); + #else + static inline void ++ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {} ++static inline void + ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {} + static inline int ath79_register_pci(void) { return 0; } + #endif diff --git a/target/linux/ar71xx/patches-3.2/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch b/target/linux/ar71xx/patches-3.2/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch new file mode 100644 index 0000000000..1ce9804370 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch @@ -0,0 +1,85 @@ +From 0b026adc7a471edd018a060427e62d06e54be2bc Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 20 Nov 2011 15:50:32 +0100 +Subject: [PATCH 18/35] MIPS: ath79: remove ar724x_pci_add_data function + +The variables set by this function are not used anymore. +Remove the function and the relevant variables as well. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes +--- + arch/mips/ath79/mach-ubnt-xm.c | 7 ------- + arch/mips/ath79/pci.c | 8 -------- + arch/mips/ath79/pci.h | 6 ------ + 3 files changed, 0 insertions(+), 21 deletions(-) + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -82,12 +82,6 @@ static struct ath79_spi_platform_data ub + #ifdef CONFIG_PCI + static struct ath9k_platform_data ubnt_xm_eeprom_data; + +-static struct ar724x_pci_data ubnt_xm_pci_data[] = { +- { +- .irq = ATH79_PCI_IRQ(0), +- }, +-}; +- + static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) + { + switch (PCI_SLOT(dev->devfn)) { +@@ -104,7 +98,6 @@ static void __init ubnt_xm_pci_init(void + memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, + sizeof(ubnt_xm_eeprom_data.eeprom_data)); + +- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); + ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); + ath79_register_pci(); + } +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -18,8 +18,6 @@ + static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); + static const struct ath79_pci_irq *ath79_pci_irq_map __initdata; + static unsigned ath79_pci_nr_irqs __initdata; +-static struct ar724x_pci_data *pci_data; +-static int pci_data_size; + + static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = { + { +@@ -45,12 +43,6 @@ static const struct ath79_pci_irq ar724x + } + }; + +-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size) +-{ +- pci_data = data; +- pci_data_size = size; +-} +- + int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) + { + int irq = -1; +--- a/arch/mips/ath79/pci.h ++++ b/arch/mips/ath79/pci.h +@@ -11,18 +11,12 @@ + #ifndef _ATH79_PCI_H + #define _ATH79_PCI_H + +-struct ar724x_pci_data { +- int irq; +-}; +- + struct ath79_pci_irq { + u8 slot; + u8 pin; + int irq; + }; + +-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size); +- + #ifdef CONFIG_PCI + void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map); + void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)); diff --git a/target/linux/ar71xx/patches-3.2/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch b/target/linux/ar71xx/patches-3.2/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch new file mode 100644 index 0000000000..36d17e9fa1 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch @@ -0,0 +1,33 @@ +From 1759a5bc87d0eb8dbb0d8a9794b336813057eb88 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Thu, 25 Nov 2010 17:59:28 +0100 +Subject: [PATCH 19/35] MIPS: ath79: register PCI controller on the PB44 board + +The PB44 reference board has two miniPCI slots. Register +the PCI controller to make those usable. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> + +v2: - no changes +--- + arch/mips/ath79/mach-pb44.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/mach-pb44.c ++++ b/arch/mips/ath79/mach-pb44.c +@@ -19,6 +19,7 @@ + #include "dev-leds-gpio.h" + #include "dev-spi.h" + #include "dev-usb.h" ++#include "pci.h" + + #define PB44_GPIO_I2C_SCL 0 + #define PB44_GPIO_I2C_SDA 1 +@@ -114,6 +115,7 @@ static void __init pb44_init(void) + ath79_register_spi(&pb44_spi_data, pb44_spi_info, + ARRAY_SIZE(pb44_spi_info)); + ath79_register_usb(); ++ ath79_register_pci(); + } + + MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", diff --git a/target/linux/ar71xx/patches-3.2/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch b/target/linux/ar71xx/patches-3.2/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch new file mode 100644 index 0000000000..486e6f97c3 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch @@ -0,0 +1,77 @@ +From e83c294ff219ff709b8179cbff64f293199a6dad Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Tue, 22 Nov 2011 21:13:58 +0100 +Subject: [PATCH 20/35] MIPS: ath79: update copyright headers of PCI related files + +Add copyright records according to the recent changes in +the PCI code. Also fix up the descriptions. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + +Just in case if someone is curious about why 2008 and 2009 years are +present in this change: + +The recent PCI specific changes were based on an existing +code which can be found in the OpenWrt repository, and we +are working on that since 2008. + +v2: - no changes +--- + arch/mips/ath79/pci.c | 4 ++++ + arch/mips/ath79/pci.h | 4 +++- + arch/mips/include/asm/mach-ath79/pci.h | 4 +++- + arch/mips/pci/pci-ar724x.c | 3 ++- + 4 files changed, 12 insertions(+), 3 deletions(-) + +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -2,6 +2,10 @@ + * Atheros AR71XX/AR724X specific PCI setup code + * + * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published +--- a/arch/mips/ath79/pci.h ++++ b/arch/mips/ath79/pci.h +@@ -1,7 +1,9 @@ + /* +- * Atheros 724x PCI support ++ * Atheros AR71XX/AR724X PCI support + * + * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published +--- a/arch/mips/include/asm/mach-ath79/pci.h ++++ b/arch/mips/include/asm/mach-ath79/pci.h +@@ -1,7 +1,9 @@ + /* +- * Atheros 724x PCI support ++ * Atheros AR71XX/AR724X PCI support + * + * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -1,7 +1,8 @@ + /* +- * Atheros 724x PCI support ++ * Atheros AR724X PCI host controller driver + * + * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> ++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published diff --git a/target/linux/ar71xx/patches-3.2/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch new file mode 100644 index 0000000000..d22aedec6a --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch @@ -0,0 +1,52 @@ +From f60aed87f838ecfa4033ff1f63f97d05359b3b51 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 11 Dec 2011 17:36:08 +0100 +Subject: [PATCH 21/35] MIPS: ath79: add early_printk support for AR934X + +The patch allows to see kernel messages on AR934X SoCs in +early boot stage. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/early_printk.c | 3 +++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 6 +++++- + 2 files changed, 8 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -71,6 +71,9 @@ static void prom_putchar_init(void) + case REV_ID_MAJOR_AR7241: + case REV_ID_MAJOR_AR7242: + case REV_ID_MAJOR_AR913X: ++ case REV_ID_MAJOR_AR9341: ++ case REV_ID_MAJOR_AR9342: ++ case REV_ID_MAJOR_AR9344: + _prom_putchar = prom_putchar_ar71xx; + break; + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -1,10 +1,11 @@ + /* + * Atheros AR71XX/AR724X/AR913X SoC register definitions + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * +- * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published +@@ -249,6 +250,9 @@ + #define REV_ID_MAJOR_AR7242 0x1100 + #define REV_ID_MAJOR_AR9330 0x0110 + #define REV_ID_MAJOR_AR9331 0x1110 ++#define REV_ID_MAJOR_AR9341 0x0120 ++#define REV_ID_MAJOR_AR9342 0x1120 ++#define REV_ID_MAJOR_AR9344 0x2120 + + #define AR71XX_REV_ID_MINOR_MASK 0x3 + #define AR71XX_REV_ID_MINOR_AR7130 0x0 diff --git a/target/linux/ar71xx/patches-3.2/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch b/target/linux/ar71xx/patches-3.2/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch new file mode 100644 index 0000000000..7c57e40405 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch @@ -0,0 +1,54 @@ +From 655a57ed2df5e34c32645e08c3244facba70ae5f Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 14:39:04 +0100 +Subject: [PATCH 22/35] MIPS: ath79: sort case statements in ath79_detect_sys_type + +Sort the case statements alphabetically in order to improve +readability. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/setup.c | 24 ++++++++++++------------ + 1 files changed, 12 insertions(+), 12 deletions(-) + +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -116,18 +116,6 @@ static void __init ath79_detect_sys_type + rev = id & AR724X_REV_ID_REVISION_MASK; + break; + +- case REV_ID_MAJOR_AR9330: +- ath79_soc = ATH79_SOC_AR9330; +- chip = "9330"; +- rev = id & AR933X_REV_ID_REVISION_MASK; +- break; +- +- case REV_ID_MAJOR_AR9331: +- ath79_soc = ATH79_SOC_AR9331; +- chip = "9331"; +- rev = id & AR933X_REV_ID_REVISION_MASK; +- break; +- + case REV_ID_MAJOR_AR913X: + minor = id & AR913X_REV_ID_MINOR_MASK; + rev = id >> AR913X_REV_ID_REVISION_SHIFT; +@@ -145,6 +133,18 @@ static void __init ath79_detect_sys_type + } + break; + ++ case REV_ID_MAJOR_AR9330: ++ ath79_soc = ATH79_SOC_AR9330; ++ chip = "9330"; ++ rev = id & AR933X_REV_ID_REVISION_MASK; ++ break; ++ ++ case REV_ID_MAJOR_AR9331: ++ ath79_soc = ATH79_SOC_AR9331; ++ chip = "9331"; ++ rev = id & AR933X_REV_ID_REVISION_MASK; ++ break; ++ + default: + panic("ath79: unknown SoC, id:0x%08x\n", id); + } diff --git a/target/linux/ar71xx/patches-3.2/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch new file mode 100644 index 0000000000..636f82f8b5 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch @@ -0,0 +1,120 @@ +From 9c19e86a7eccf8efd159ba213290830164f33a71 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 11 Dec 2011 17:36:42 +0100 +Subject: [PATCH 23/35] MIPS: ath79: add SoC detection code for AR934X + +Also add 'soc_is_ar934[124x]' helper functions and a Kconfig +symbol for the AR934X SoCs. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/Kconfig | 4 ++++ + arch/mips/ath79/setup.c | 21 ++++++++++++++++++++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++ + arch/mips/include/asm/mach-ath79/ath79.h | 23 +++++++++++++++++++++++ + 4 files changed, 49 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -69,6 +69,10 @@ config SOC_AR933X + select USB_ARCH_HAS_EHCI + def_bool n + ++config SOC_AR934X ++ select USB_ARCH_HAS_EHCI ++ def_bool n ++ + config ATH79_DEV_GPIO_BUTTONS + def_bool n + +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -1,10 +1,11 @@ + /* + * Atheros AR71XX/AR724X/AR913X specific setup + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * +- * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published +@@ -145,6 +146,24 @@ static void __init ath79_detect_sys_type + rev = id & AR933X_REV_ID_REVISION_MASK; + break; + ++ case REV_ID_MAJOR_AR9341: ++ ath79_soc = ATH79_SOC_AR9341; ++ chip = "9341"; ++ rev = id & AR934X_REV_ID_REVISION_MASK; ++ break; ++ ++ case REV_ID_MAJOR_AR9342: ++ ath79_soc = ATH79_SOC_AR9342; ++ chip = "9342"; ++ rev = id & AR934X_REV_ID_REVISION_MASK; ++ break; ++ ++ case REV_ID_MAJOR_AR9344: ++ ath79_soc = ATH79_SOC_AR9344; ++ chip = "9344"; ++ rev = id & AR934X_REV_ID_REVISION_MASK; ++ break; ++ + default: + panic("ath79: unknown SoC, id:0x%08x\n", id); + } +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -271,6 +271,8 @@ + + #define AR724X_REV_ID_REVISION_MASK 0x3 + ++#define AR934X_REV_ID_REVISION_MASK 0xf ++ + /* + * SPI block + */ +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -29,6 +29,9 @@ enum ath79_soc_type { + ATH79_SOC_AR9132, + ATH79_SOC_AR9330, + ATH79_SOC_AR9331, ++ ATH79_SOC_AR9341, ++ ATH79_SOC_AR9342, ++ ATH79_SOC_AR9344, + }; + + extern enum ath79_soc_type ath79_soc; +@@ -75,6 +78,26 @@ static inline int soc_is_ar933x(void) + ath79_soc == ATH79_SOC_AR9331); + } + ++static inline int soc_is_ar9341(void) ++{ ++ return (ath79_soc == ATH79_SOC_AR9341); ++} ++ ++static inline int soc_is_ar9342(void) ++{ ++ return (ath79_soc == ATH79_SOC_AR9342); ++} ++ ++static inline int soc_is_ar9344(void) ++{ ++ return (ath79_soc == ATH79_SOC_AR9344); ++} ++ ++static inline int soc_is_ar934x(void) ++{ ++ return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); ++} ++ + extern void __iomem *ath79_ddr_base; + extern void __iomem *ath79_pll_base; + extern void __iomem *ath79_reset_base; diff --git a/target/linux/ar71xx/patches-3.2/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch new file mode 100644 index 0000000000..fd7976faf0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch @@ -0,0 +1,194 @@ +From 783addfa256e79892f889e95ec5cda34f4e91eb7 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 20:36:32 +0100 +Subject: [PATCH 24/35] MIPS: ath79: add clock initialization code for AR934X + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/clock.c | 81 ++++++++++++++++++++++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 53 +++++++++++++++ + 2 files changed, 134 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -1,8 +1,11 @@ + /* + * Atheros AR71XX/AR724X/AR913X common routines + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * ++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. +@@ -163,6 +166,82 @@ static void __init ar933x_clocks_init(vo + ath79_uart_clk.rate = ath79_ref_clk.rate; + } + ++static void __init ar934x_clocks_init(void) ++{ ++ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; ++ u32 cpu_pll, ddr_pll; ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40) ++ ath79_ref_clk.rate = 40 * 1000 * 1000; ++ else ++ ath79_ref_clk.rate = 25 * 1000 * 1000; ++ ++ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG); ++ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & ++ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) & ++ AR934X_PLL_CPU_CONFIG_REFDIV_MASK; ++ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) & ++ AR934X_PLL_CPU_CONFIG_NINT_MASK; ++ frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) & ++ AR934X_PLL_CPU_CONFIG_NFRAC_MASK; ++ ++ cpu_pll = nint * ath79_ref_clk.rate / ref_div; ++ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6)); ++ cpu_pll /= (1 << out_div); ++ ++ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG); ++ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & ++ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) & ++ AR934X_PLL_DDR_CONFIG_REFDIV_MASK; ++ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) & ++ AR934X_PLL_DDR_CONFIG_NINT_MASK; ++ frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) & ++ AR934X_PLL_DDR_CONFIG_NFRAC_MASK; ++ ++ ddr_pll = nint * ath79_ref_clk.rate / ref_div; ++ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10)); ++ ddr_pll /= (1 << out_div); ++ ++ clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG); ++ ++ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) & ++ AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK; ++ ++ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS) ++ ath79_cpu_clk.rate = ath79_ref_clk.rate; ++ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL) ++ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1); ++ else ++ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) & ++ AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK; ++ ++ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS) ++ ath79_ddr_clk.rate = ath79_ref_clk.rate; ++ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL) ++ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1); ++ else ++ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) & ++ AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK; ++ ++ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS) ++ ath79_ahb_clk.rate = ath79_ref_clk.rate; ++ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL) ++ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1); ++ else ++ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1); ++ ++ ath79_wdt_clk.rate = ath79_ref_clk.rate; ++ ath79_uart_clk.rate = ath79_ref_clk.rate; ++} ++ + void __init ath79_clocks_init(void) + { + if (soc_is_ar71xx()) +@@ -173,6 +252,8 @@ void __init ath79_clocks_init(void) + ar913x_clocks_init(); + else if (soc_is_ar933x()) + ar933x_clocks_init(); ++ else if (soc_is_ar934x()) ++ ar934x_clocks_init(); + else + BUG(); + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -151,6 +151,41 @@ + #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 + #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 + ++#define AR934X_PLL_CPU_CONFIG_REG 0x00 ++#define AR934X_PLL_DDR_CONFIG_REG 0x04 ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 ++ ++#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 ++#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f ++#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6 ++#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f ++#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 ++#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f ++#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 ++#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 ++ ++#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 ++#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff ++#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10 ++#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f ++#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 ++#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f ++#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 ++#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 ++ ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2) ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3) ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4) ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5 ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10 ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15 ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) ++#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) ++ + /* + * USB_CONFIG block + */ +@@ -186,6 +221,8 @@ + #define AR933X_RESET_REG_RESET_MODULE 0x1c + #define AR933X_RESET_REG_BOOTSTRAP 0xac + ++#define AR934X_RESET_REG_BOOTSTRAP 0xb0 ++ + #define MISC_INT_ETHSW BIT(12) + #define MISC_INT_TIMER4 BIT(10) + #define MISC_INT_TIMER3 BIT(9) +@@ -242,6 +279,22 @@ + + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + ++#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) ++#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22) ++#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21) ++#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20) ++#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19) ++#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18) ++#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17) ++#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16) ++#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) ++#define AR934X_BOOTSTRAP_PCIE_RC BIT(6) ++#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) ++#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) ++#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) ++#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) ++#define AR934X_BOOTSTRAP_DDR1 BIT(0) ++ + #define REV_ID_MAJOR_MASK 0xfff0 + #define REV_ID_MAJOR_AR71XX 0x00a0 + #define REV_ID_MAJOR_AR913X 0x00b0 diff --git a/target/linux/ar71xx/patches-3.2/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch new file mode 100644 index 0000000000..f406db90e6 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch @@ -0,0 +1,98 @@ +From c01b6005cfa2d762c2de33d5be2e82f91afaa66f Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 20:53:47 +0100 +Subject: [PATCH 25/35] MIPS: ath79: add GPIO support code for AR934X + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/gpio.c | 47 +++++++++++++++++++++++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + + 2 files changed, 47 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -1,9 +1,12 @@ + /* + * Atheros AR71XX/AR724X/AR913X GPIO API support + * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * ++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. +@@ -89,6 +92,42 @@ static int ath79_gpio_direction_output(s + return 0; + } + ++static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) ++{ ++ void __iomem *base = ath79_gpio_base; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ath79_gpio_lock, flags); ++ ++ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset), ++ base + AR71XX_GPIO_REG_OE); ++ ++ spin_unlock_irqrestore(&ath79_gpio_lock, flags); ++ ++ return 0; ++} ++ ++static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset, ++ int value) ++{ ++ void __iomem *base = ath79_gpio_base; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ath79_gpio_lock, flags); ++ ++ if (value) ++ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET); ++ else ++ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR); ++ ++ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset), ++ base + AR71XX_GPIO_REG_OE); ++ ++ spin_unlock_irqrestore(&ath79_gpio_lock, flags); ++ ++ return 0; ++} ++ + static struct gpio_chip ath79_gpio_chip = { + .label = "ath79", + .get = ath79_gpio_get_value, +@@ -155,11 +194,17 @@ void __init ath79_gpio_init(void) + ath79_gpio_count = AR913X_GPIO_COUNT; + else if (soc_is_ar933x()) + ath79_gpio_count = AR933X_GPIO_COUNT; ++ else if (soc_is_ar934x()) ++ ath79_gpio_count = AR934X_GPIO_COUNT; + else + BUG(); + + ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); + ath79_gpio_chip.ngpio = ath79_gpio_count; ++ if (soc_is_ar934x()) { ++ ath79_gpio_chip.direction_input = ar934x_gpio_direction_input; ++ ath79_gpio_chip.direction_output = ar934x_gpio_direction_output; ++ } + + err = gpiochip_add(&ath79_gpio_chip); + if (err) +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -367,5 +367,6 @@ + #define AR724X_GPIO_COUNT 18 + #define AR913X_GPIO_COUNT 22 + #define AR933X_GPIO_COUNT 30 ++#define AR934X_GPIO_COUNT 23 + + #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-3.2/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch b/target/linux/ar71xx/patches-3.2/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch new file mode 100644 index 0000000000..144acacf4a --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch @@ -0,0 +1,154 @@ +From e69d89040d4884ea4069352338f555694e65fe70 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 21:30:03 +0100 +Subject: [PATCH 26/35] MIPS: ath79: rework IP2/IP3 interrupt handling + +The current implementation assumes that flushing the +DDR writeback buffer is required for IP2/IP3 interrupts, +however this is not true for all SoCs. + +Use SoC specific IP2/IP3 handlers instead of flushing +the buffers in the dispatcher code. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/irq.c | 92 ++++++++++++++++++++++++++++++++++++++----------- + 1 files changed, 72 insertions(+), 20 deletions(-) + +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -1,7 +1,7 @@ + /* + * Atheros AR71xx/AR724x/AR913x specific interrupt handling + * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP +@@ -23,8 +23,8 @@ + #include <asm/mach-ath79/ar71xx_regs.h> + #include "common.h" + +-static unsigned int ath79_ip2_flush_reg; +-static unsigned int ath79_ip3_flush_reg; ++static void (*ath79_ip2_handler)(void); ++static void (*ath79_ip3_handler)(void); + + static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc) + { +@@ -152,10 +152,8 @@ asmlinkage void plat_irq_dispatch(void) + if (pending & STATUSF_IP7) + do_IRQ(ATH79_CPU_IRQ_TIMER); + +- else if (pending & STATUSF_IP2) { +- ath79_ddr_wb_flush(ath79_ip2_flush_reg); +- do_IRQ(ATH79_CPU_IRQ_IP2); +- } ++ else if (pending & STATUSF_IP2) ++ ath79_ip2_handler(); + + else if (pending & STATUSF_IP4) + do_IRQ(ATH79_CPU_IRQ_GE0); +@@ -163,10 +161,8 @@ asmlinkage void plat_irq_dispatch(void) + else if (pending & STATUSF_IP5) + do_IRQ(ATH79_CPU_IRQ_GE1); + +- else if (pending & STATUSF_IP3) { +- ath79_ddr_wb_flush(ath79_ip3_flush_reg); +- do_IRQ(ATH79_CPU_IRQ_USB); +- } ++ else if (pending & STATUSF_IP3) ++ ath79_ip3_handler(); + + else if (pending & STATUSF_IP6) + do_IRQ(ATH79_CPU_IRQ_MISC); +@@ -175,22 +171,78 @@ asmlinkage void plat_irq_dispatch(void) + spurious_interrupt(); + } + ++/* ++ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for ++ * these devices typically allocate coherent DMA memory, however the ++ * DMA controller may still have some unsynchronized data in the FIFO. ++ * Issue a flush in the handlers to ensure that the driver sees ++ * the update. ++ */ ++static void ar71xx_ip2_handler(void) ++{ ++ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI); ++ do_IRQ(ATH79_CPU_IRQ_IP2); ++} ++ ++static void ar724x_ip2_handler(void) ++{ ++ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE); ++ do_IRQ(ATH79_CPU_IRQ_IP2); ++} ++ ++static void ar913x_ip2_handler(void) ++{ ++ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC); ++ do_IRQ(ATH79_CPU_IRQ_IP2); ++} ++ ++static void ar933x_ip2_handler(void) ++{ ++ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC); ++ do_IRQ(ATH79_CPU_IRQ_IP2); ++} ++ ++static void ar71xx_ip3_handler(void) ++{ ++ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB); ++ do_IRQ(ATH79_CPU_IRQ_USB); ++} ++ ++static void ar724x_ip3_handler(void) ++{ ++ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB); ++ do_IRQ(ATH79_CPU_IRQ_USB); ++} ++ ++static void ar913x_ip3_handler(void) ++{ ++ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB); ++ do_IRQ(ATH79_CPU_IRQ_USB); ++} ++ ++static void ar933x_ip3_handler(void) ++{ ++ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB); ++ do_IRQ(ATH79_CPU_IRQ_USB); ++} ++ + void __init arch_init_irq(void) + { + if (soc_is_ar71xx()) { +- ath79_ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI; +- ath79_ip3_flush_reg = AR71XX_DDR_REG_FLUSH_USB; ++ ath79_ip2_handler = ar71xx_ip2_handler; ++ ath79_ip3_handler = ar71xx_ip3_handler; + } else if (soc_is_ar724x()) { +- ath79_ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE; +- ath79_ip3_flush_reg = AR724X_DDR_REG_FLUSH_USB; ++ ath79_ip2_handler = ar724x_ip2_handler; ++ ath79_ip3_handler = ar724x_ip3_handler; + } else if (soc_is_ar913x()) { +- ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC; +- ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB; ++ ath79_ip2_handler = ar913x_ip2_handler; ++ ath79_ip3_handler = ar913x_ip3_handler; + } else if (soc_is_ar933x()) { +- ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC; +- ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB; +- } else ++ ath79_ip2_handler = ar933x_ip2_handler; ++ ath79_ip3_handler = ar933x_ip3_handler; ++ } else { + BUG(); ++ } + + cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC; + mips_cpu_irq_init(); diff --git a/target/linux/ar71xx/patches-3.2/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch new file mode 100644 index 0000000000..083ca33189 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch @@ -0,0 +1,190 @@ +From 9db6021011556948d2d28d6957cee451bc2985aa Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 21:59:50 +0100 +Subject: [PATCH 27/35] MIPS: ath79: add IRQ handling code for AR934X + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/irq.c | 55 +++++++++++++++++++++++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 25 +++++++++++ + arch/mips/include/asm/mach-ath79/irq.h | 6 ++- + 3 files changed, 83 insertions(+), 3 deletions(-) + +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -1,10 +1,11 @@ + /* + * Atheros AR71xx/AR724x/AR913x specific interrupt handling + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * +- * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published +@@ -129,7 +130,7 @@ static void __init ath79_misc_irq_init(v + + if (soc_is_ar71xx() || soc_is_ar913x()) + ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; +- else if (soc_is_ar724x() || soc_is_ar933x()) ++ else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x()) + ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; + else + BUG(); +@@ -143,6 +144,39 @@ static void __init ath79_misc_irq_init(v + irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler); + } + ++static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) ++{ ++ u32 status; ++ ++ disable_irq_nosync(irq); ++ ++ status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS); ++ ++ if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) { ++ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE); ++ generic_handle_irq(ATH79_IP2_IRQ(0)); ++ } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { ++ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC); ++ generic_handle_irq(ATH79_IP2_IRQ(1)); ++ } else { ++ spurious_interrupt(); ++ } ++ ++ enable_irq(irq); ++} ++ ++static void ar934x_ip2_irq_init(void) ++{ ++ int i; ++ ++ for (i = ATH79_IP2_IRQ_BASE; ++ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &dummy_irq_chip, ++ handle_level_irq); ++ ++ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch); ++} ++ + asmlinkage void plat_irq_dispatch(void) + { + unsigned long pending; +@@ -202,6 +236,11 @@ static void ar933x_ip2_handler(void) + do_IRQ(ATH79_CPU_IRQ_IP2); + } + ++static void ar934x_ip2_handler(void) ++{ ++ do_IRQ(ATH79_CPU_IRQ_IP2); ++} ++ + static void ar71xx_ip3_handler(void) + { + ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB); +@@ -226,6 +265,12 @@ static void ar933x_ip3_handler(void) + do_IRQ(ATH79_CPU_IRQ_USB); + } + ++static void ar934x_ip3_handler(void) ++{ ++ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB); ++ do_IRQ(ATH79_CPU_IRQ_USB); ++} ++ + void __init arch_init_irq(void) + { + if (soc_is_ar71xx()) { +@@ -240,6 +285,9 @@ void __init arch_init_irq(void) + } else if (soc_is_ar933x()) { + ath79_ip2_handler = ar933x_ip2_handler; + ath79_ip3_handler = ar933x_ip3_handler; ++ } else if (soc_is_ar934x()) { ++ ath79_ip2_handler = ar934x_ip2_handler; ++ ath79_ip3_handler = ar934x_ip3_handler; + } else { + BUG(); + } +@@ -247,4 +295,7 @@ void __init arch_init_irq(void) + cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC; + mips_cpu_irq_init(); + ath79_misc_irq_init(); ++ ++ if (soc_is_ar934x()) ++ ar934x_ip2_irq_init(); + } +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -92,6 +92,12 @@ + #define AR933X_DDR_REG_FLUSH_USB 0x84 + #define AR933X_DDR_REG_FLUSH_WMAC 0x88 + ++#define AR934X_DDR_REG_FLUSH_GE0 0x9c ++#define AR934X_DDR_REG_FLUSH_GE1 0xa0 ++#define AR934X_DDR_REG_FLUSH_USB 0xa4 ++#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 ++#define AR934X_DDR_REG_FLUSH_WMAC 0xac ++ + /* + * PLL block + */ +@@ -222,6 +228,7 @@ + #define AR933X_RESET_REG_BOOTSTRAP 0xac + + #define AR934X_RESET_REG_BOOTSTRAP 0xb0 ++#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac + + #define MISC_INT_ETHSW BIT(12) + #define MISC_INT_TIMER4 BIT(10) +@@ -295,6 +302,24 @@ + #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) + #define AR934X_BOOTSTRAP_DDR1 BIT(0) + ++#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) ++#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) ++#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) ++#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) ++#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4) ++#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) ++#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) ++#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) ++#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) ++#define AR934X_PCIE_WMAC_INT_WMAC_ALL \ ++ (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \ ++ AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP) ++ ++#define AR934X_PCIE_WMAC_INT_PCIE_ALL \ ++ (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \ ++ AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ ++ AR934X_PCIE_WMAC_INT_PCIE_RC3) ++ + #define REV_ID_MAJOR_MASK 0xfff0 + #define REV_ID_MAJOR_AR71XX 0x00a0 + #define REV_ID_MAJOR_AR913X 0x00b0 +--- a/arch/mips/include/asm/mach-ath79/irq.h ++++ b/arch/mips/include/asm/mach-ath79/irq.h +@@ -10,7 +10,7 @@ + #define __ASM_MACH_ATH79_IRQ_H + + #define MIPS_CPU_IRQ_BASE 0 +-#define NR_IRQS 46 ++#define NR_IRQS 48 + + #define ATH79_MISC_IRQ_BASE 8 + #define ATH79_MISC_IRQ_COUNT 32 +@@ -19,6 +19,10 @@ + #define ATH79_PCI_IRQ_COUNT 6 + #define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x)) + ++#define ATH79_IP2_IRQ_BASE (ATH79_PCI_IRQ_BASE + ATH79_PCI_IRQ_COUNT) ++#define ATH79_IP2_IRQ_COUNT 2 ++#define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x)) ++ + #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2) + #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3) + #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4) diff --git a/target/linux/ar71xx/patches-3.2/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch b/target/linux/ar71xx/patches-3.2/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch new file mode 100644 index 0000000000..dc9df92fcf --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch @@ -0,0 +1,56 @@ +From da0f20f8a99de9193fc484a25d1f9edc913c98fd Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sat, 10 Dec 2011 20:09:39 +0100 +Subject: [PATCH 28/35] MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set} + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/common.c | 9 ++++++++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + + 2 files changed, 9 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -1,9 +1,12 @@ + /* + * Atheros AR71XX/AR724X/AR913X common routines + * +- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * ++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. +@@ -67,6 +70,8 @@ void ath79_device_reset_set(u32 mask) + reg = AR913X_RESET_REG_RESET_MODULE; + else if (soc_is_ar933x()) + reg = AR933X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar934x()) ++ reg = AR934X_RESET_REG_RESET_MODULE; + else + BUG(); + +@@ -91,6 +96,8 @@ void ath79_device_reset_clear(u32 mask) + reg = AR913X_RESET_REG_RESET_MODULE; + else if (soc_is_ar933x()) + reg = AR933X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar934x()) ++ reg = AR934X_RESET_REG_RESET_MODULE; + else + BUG(); + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -227,6 +227,7 @@ + #define AR933X_RESET_REG_RESET_MODULE 0x1c + #define AR933X_RESET_REG_BOOTSTRAP 0xac + ++#define AR934X_RESET_REG_RESET_MODULE 0x1c + #define AR934X_RESET_REG_BOOTSTRAP 0xb0 + #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac + diff --git a/target/linux/ar71xx/patches-3.2/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch b/target/linux/ar71xx/patches-3.2/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch new file mode 100644 index 0000000000..db5ae6164a --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch @@ -0,0 +1,23 @@ +From 6b6803a249a27aa708bc5f24aa15270e30f3de61 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sat, 10 Dec 2011 19:55:05 +0100 +Subject: [PATCH 29/35] MIPS: ath79: register UART device for AR934X SoCs + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/dev-common.c | 3 ++- + 1 files changed, 2 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -89,7 +89,8 @@ void __init ath79_register_uart(void) + + if (soc_is_ar71xx() || + soc_is_ar724x() || +- soc_is_ar913x()) { ++ soc_is_ar913x() || ++ soc_is_ar934x()) { + ath79_uart_data[0].uartclk = clk_get_rate(clk); + platform_device_register(&ath79_uart_device); + } else if (soc_is_ar933x()) { diff --git a/target/linux/ar71xx/patches-3.2/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch new file mode 100644 index 0000000000..ca7c9289ca --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch @@ -0,0 +1,112 @@ +From 58b69cf52387a7351ec13b52d3d6a495fe611c29 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 22:07:23 +0100 +Subject: [PATCH 30/35] MIPS: ath79: add WMAC registration code for AR934X + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/Kconfig | 2 +- + arch/mips/ath79/dev-wmac.c | 30 ++++++++++++++++++++++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++ + 3 files changed, 32 insertions(+), 3 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -86,7 +86,7 @@ config ATH79_DEV_USB + def_bool n + + config ATH79_DEV_WMAC +- depends on (SOC_AR913X || SOC_AR933X) ++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X) + def_bool n + + endif +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -1,9 +1,12 @@ + /* + * Atheros AR913X/AR933X SoC built-in WMAC device support + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * ++ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. +@@ -26,8 +29,7 @@ static struct resource ath79_wmac_resour + /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, { +- .start = ATH79_CPU_IRQ_IP2, +- .end = ATH79_CPU_IRQ_IP2, ++ /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_IRQ, + }, + }; +@@ -53,6 +55,8 @@ static void __init ar913x_wmac_setup(voi + + ath79_wmac_resources[0].start = AR913X_WMAC_BASE; + ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; ++ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2; ++ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2; + } + + +@@ -79,6 +83,8 @@ static void __init ar933x_wmac_setup(voi + + ath79_wmac_resources[0].start = AR933X_WMAC_BASE; + ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; ++ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2; ++ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2; + + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + if (t & AR933X_BOOTSTRAP_REF_CLK_40) +@@ -92,12 +98,32 @@ static void __init ar933x_wmac_setup(voi + ath79_wmac_data.external_reset = ar933x_wmac_reset; + } + ++static void ar934x_wmac_setup(void) ++{ ++ u32 t; ++ ++ ath79_wmac_device.name = "ar934x_wmac"; ++ ++ ath79_wmac_resources[0].start = AR934X_WMAC_BASE; ++ ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; ++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); ++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); ++ ++ t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); ++ if (t & AR934X_BOOTSTRAP_REF_CLK_40) ++ ath79_wmac_data.is_clk_25mhz = false; ++ else ++ ath79_wmac_data.is_clk_25mhz = true; ++} ++ + void __init ath79_register_wmac(u8 *cal_data) + { + if (soc_is_ar913x()) + ar913x_wmac_setup(); + else if (soc_is_ar933x()) + ar933x_wmac_setup(); ++ else if (soc_is_ar934x()) ++ ar934x_wmac_setup(); + else + BUG(); + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -61,6 +61,9 @@ + #define AR933X_EHCI_BASE 0x1b000000 + #define AR933X_EHCI_SIZE 0x1000 + ++#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define AR934X_WMAC_SIZE 0x20000 ++ + /* + * DDR_CTRL block + */ diff --git a/target/linux/ar71xx/patches-3.2/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch new file mode 100644 index 0000000000..7ac304fe81 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch @@ -0,0 +1,107 @@ +From 2d832612094b5592641364773c5ab2a3658f7120 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 11 Dec 2011 18:34:13 +0100 +Subject: [PATCH 31/35] MIPS: ath79: add USB platform setup code for AR934X + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/dev-usb.c | 28 +++++++++++++++++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 35 ++++++++++++++++++++++++ + 2 files changed, 63 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -180,6 +180,32 @@ static void __init ar933x_usb_setup(void + platform_device_register(&ath79_ehci_device); + } + ++static void __init ar934x_usb_setup(void) ++{ ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) ++ return; ++ ++ ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE); ++ udelay(1000); ++ ++ ath79_device_reset_set(AR934X_RESET_USB_PHY); ++ udelay(1000); ++ ++ ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG); ++ udelay(1000); ++ ++ ath79_device_reset_set(AR934X_RESET_USB_HOST); ++ udelay(1000); ++ ++ ath79_ehci_resources[0].start = AR934X_EHCI_BASE; ++ ath79_ehci_resources[0].end = AR934X_EHCI_BASE + AR934X_EHCI_SIZE - 1; ++ ath79_ehci_device.name = "ar934x-ehci"; ++ platform_device_register(&ath79_ehci_device); ++} ++ + void __init ath79_register_usb(void) + { + if (soc_is_ar71xx()) +@@ -192,6 +218,8 @@ void __init ath79_register_usb(void) + ar913x_usb_setup(); + else if (soc_is_ar933x()) + ar933x_usb_setup(); ++ else if (soc_is_ar934x()) ++ ar934x_usb_setup(); + else + BUG(); + } +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -63,6 +63,8 @@ + + #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR934X_WMAC_SIZE 0x20000 ++#define AR934X_EHCI_BASE 0x1b000000 ++#define AR934X_EHCI_SIZE 0x1000 + + /* + * DDR_CTRL block +@@ -288,6 +290,39 @@ + #define AR933X_RESET_USB_PHY BIT(4) + #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + ++#define AR934X_RESET_HOST BIT(31) ++#define AR934X_RESET_SLIC BIT(30) ++#define AR934X_RESET_HDMA BIT(29) ++#define AR934X_RESET_EXTERNAL BIT(28) ++#define AR934X_RESET_RTC BIT(27) ++#define AR934X_RESET_PCIE_EP_INT BIT(26) ++#define AR934X_RESET_CHKSUM_ACC BIT(25) ++#define AR934X_RESET_FULL_CHIP BIT(24) ++#define AR934X_RESET_GE1_MDIO BIT(23) ++#define AR934X_RESET_GE0_MDIO BIT(22) ++#define AR934X_RESET_CPU_NMI BIT(21) ++#define AR934X_RESET_CPU_COLD BIT(20) ++#define AR934X_RESET_HOST_RESET_INT BIT(19) ++#define AR934X_RESET_PCIE_EP BIT(18) ++#define AR934X_RESET_UART1 BIT(17) ++#define AR934X_RESET_DDR BIT(16) ++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) ++#define AR934X_RESET_NANDF BIT(14) ++#define AR934X_RESET_GE1_MAC BIT(13) ++#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) ++#define AR934X_RESET_USB_PHY_ANALOG BIT(11) ++#define AR934X_RESET_HOST_DMA_INT BIT(10) ++#define AR934X_RESET_GE0_MAC BIT(9) ++#define AR934X_RESET_ETH_SIWTCH BIT(8) ++#define AR934X_RESET_PCIE_PHY BIT(7) ++#define AR934X_RESET_PCIE BIT(6) ++#define AR934X_RESET_USB_HOST BIT(5) ++#define AR934X_RESET_USB_PHY BIT(4) ++#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) ++#define AR934X_RESET_LUT BIT(2) ++#define AR934X_RESET_MBOX BIT(1) ++#define AR934X_RESET_I2S BIT(0) ++ + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) diff --git a/target/linux/ar71xx/patches-3.2/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch b/target/linux/ar71xx/patches-3.2/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch new file mode 100644 index 0000000000..dff6969d6f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch @@ -0,0 +1,62 @@ +From f299f36542f81f05cff7cdebb50abde202faf6df Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sat, 17 Dec 2011 10:04:18 +0100 +Subject: [PATCH 32/35] MIPS: ath79: add PCI_AR724X Kconfig symbol + +The AR724X specific PCI code can be used for the +AR934X SoCs, however it can be selected only if +SOC_AR724X is set. + +Introduce a new Kconfig symbol in order to be able +to use the code for AR934X as well. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/Kconfig | 4 ++++ + arch/mips/include/asm/mach-ath79/pci.h | 2 +- + arch/mips/pci/Makefile | 2 +- + 3 files changed, 6 insertions(+), 2 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -59,6 +59,7 @@ config SOC_AR724X + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI + select HW_HAS_PCI ++ select PCI_AR724X if PCI + def_bool n + + config SOC_AR913X +@@ -73,6 +74,9 @@ config SOC_AR934X + select USB_ARCH_HAS_EHCI + def_bool n + ++config PCI_AR724X ++ def_bool n ++ + config ATH79_DEV_GPIO_BUTTONS + def_bool n + +--- a/arch/mips/include/asm/mach-ath79/pci.h ++++ b/arch/mips/include/asm/mach-ath79/pci.h +@@ -19,7 +19,7 @@ int ar71xx_pcibios_init(void); + static inline int ar71xx_pcibios_init(void) { return 0 }; + #endif + +-#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) ++#if defined(CONFIG_PCI_AR724X) + int ar724x_pcibios_init(int irq); + #else + static inline int ar724x_pcibios_init(int irq) { return 0 }; +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -20,7 +20,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o + ops-bcm63xx.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o + obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o +-obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o ++obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o + + # + # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ar71xx/patches-3.2/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.2/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch new file mode 100644 index 0000000000..6c9d072ac4 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch @@ -0,0 +1,58 @@ +From e30d942814a606c5258c7adafc6bbb49836573e9 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sat, 17 Dec 2011 10:13:08 +0100 +Subject: [PATCH 33/35] MIPS: ath79: add PCI registration code for AR934X + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/Kconfig | 2 ++ + arch/mips/ath79/pci.c | 13 ++++++++++++- + 2 files changed, 14 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -72,6 +72,8 @@ config SOC_AR933X + + config SOC_AR934X + select USB_ARCH_HAS_EHCI ++ select HW_HAS_PCI ++ select PCI_AR724X if PCI + def_bool n + + config PCI_AR724X +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -14,6 +14,7 @@ + + #include <linux/init.h> + #include <linux/pci.h> ++#include <asm/mach-ath79/ar71xx_regs.h> + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/irq.h> + #include <asm/mach-ath79/pci.h> +@@ -57,7 +58,9 @@ int __init pcibios_map_irq(const struct + if (soc_is_ar71xx()) { + ath79_pci_irq_map = ar71xx_pci_irq_map; + ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map); +- } else if (soc_is_ar724x()) { ++ } else if (soc_is_ar724x() || ++ soc_is_ar9342() || ++ soc_is_ar9344()) { + ath79_pci_irq_map = ar724x_pci_irq_map; + ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); + } else { +@@ -115,5 +118,13 @@ int __init ath79_register_pci(void) + if (soc_is_ar724x()) + return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2); + ++ if (soc_is_ar9342() || soc_is_ar9344()) { ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC) ++ return ar724x_pcibios_init(ATH79_IP2_IRQ(0)); ++ } ++ + return -ENODEV; + } diff --git a/target/linux/ar71xx/patches-3.2/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch b/target/linux/ar71xx/patches-3.2/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch new file mode 100644 index 0000000000..3f6c3e2adb --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch @@ -0,0 +1,213 @@ +From a01e8727327cf0fb6382ca8700a3a3f73d93202a Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Fri, 9 Dec 2011 22:23:02 +0100 +Subject: [PATCH 34/35] MIPS: ath79: add initial support for the Atheros DB120 board + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +--- + arch/mips/ath79/Kconfig | 12 +++ + arch/mips/ath79/Makefile | 1 + + arch/mips/ath79/mach-db120.c | 155 ++++++++++++++++++++++++++++++++++++++++++ + arch/mips/ath79/machtypes.h | 1 + + 4 files changed, 169 insertions(+), 0 deletions(-) + create mode 100644 arch/mips/ath79/mach-db120.c + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -26,6 +26,18 @@ config ATH79_MACH_AP81 + Say 'Y' here if you want your kernel to support the + Atheros AP81 reference board. + ++config ATH79_MACH_DB120 ++ bool "Atheros DB120 reference board" ++ select SOC_AR934X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros DB120 reference board. ++ + config ATH79_MACH_PB44 + bool "Atheros PB44 reference board" + select SOC_AR71XX +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -28,5 +28,6 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma + # + obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o + obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o ++obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o + obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o + obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o +--- /dev/null ++++ b/arch/mips/ath79/mach-db120.c +@@ -0,0 +1,155 @@ ++/* ++ * Atheros DB120 reference board support ++ * ++ * Copyright (c) 2011 Qualcomm Atheros ++ * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted (subject to the limitations in the ++ * disclaimer below) provided that the following conditions are met: ++ * ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the ++ * distribution. ++ * ++ * * Neither the name of Qualcomm Atheros nor the names of its ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE ++ * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT ++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ++ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, ++ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE ++ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN ++ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include <linux/pci.h> ++#include <linux/ath9k_platform.h> ++ ++#include "machtypes.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-spi.h" ++#include "dev-usb.h" ++#include "dev-wmac.h" ++#include "pci.h" ++ ++#define DB120_GPIO_LED_WLAN_5G 12 ++#define DB120_GPIO_LED_WLAN_2G 13 ++#define DB120_GPIO_LED_STATUS 14 ++#define DB120_GPIO_LED_WPS 15 ++ ++#define DB120_GPIO_BTN_WPS 16 ++ ++#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) ++ ++#define DB120_WMAC_CALDATA_OFFSET 0x1000 ++#define DB120_PCIE_CALDATA_OFFSET 0x5000 ++ ++static struct gpio_led db120_leds_gpio[] __initdata = { ++ { ++ .name = "db120:green:status", ++ .gpio = DB120_GPIO_LED_STATUS, ++ .active_low = 1, ++ }, ++ { ++ .name = "db120:green:wps", ++ .gpio = DB120_GPIO_LED_WPS, ++ .active_low = 1, ++ }, ++ { ++ .name = "db120:green:wlan-5g", ++ .gpio = DB120_GPIO_LED_WLAN_5G, ++ .active_low = 1, ++ }, ++ { ++ .name = "db120:green:wlan-2g", ++ .gpio = DB120_GPIO_LED_WLAN_2G, ++ .active_low = 1, ++ }, ++}; ++ ++static struct gpio_keys_button db120_gpio_keys[] __initdata = { ++ { ++ .desc = "WPS button", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DB120_GPIO_BTN_WPS, ++ .active_low = 1, ++ }, ++}; ++ ++static struct spi_board_info db120_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "s25sl064a", ++ } ++}; ++ ++static struct ath79_spi_platform_data db120_spi_data = { ++ .bus_num = 0, ++ .num_chipselect = 1, ++}; ++ ++#ifdef CONFIG_PCI ++static struct ath9k_platform_data db120_ath9k_data; ++ ++static int db120_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ switch (PCI_SLOT(dev->devfn)) { ++ case 0: ++ dev->dev.platform_data = &db120_ath9k_data; ++ break; ++ } ++ ++ return 0; ++} ++ ++static void __init db120_pci_init(u8 *eeprom) ++{ ++ memcpy(db120_ath9k_data.eeprom_data, eeprom, ++ sizeof(db120_ath9k_data.eeprom_data)); ++ ++ ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); ++ ath79_register_pci(); ++} ++#else ++static inline void db120_pci_init(void) {} ++#endif /* CONFIG_PCI */ ++ ++static void __init db120_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), ++ db120_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(db120_gpio_keys), ++ db120_gpio_keys); ++ ath79_register_spi(&db120_spi_data, db120_spi_info, ++ ARRAY_SIZE(db120_spi_info)); ++ ath79_register_usb(); ++ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); ++ db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); ++} ++ ++MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", ++ db120_setup); +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -18,6 +18,7 @@ enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, + ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ ++ ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ + }; diff --git a/target/linux/ar71xx/patches-3.2/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch b/target/linux/ar71xx/patches-3.2/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch new file mode 100644 index 0000000000..477fa0678d --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch @@ -0,0 +1,41 @@ +From cbf8930fe259777fb746f0387bf821729061c122 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 11 Dec 2011 22:09:20 +0100 +Subject: [PATCH 35/35] USB: ehci-ath79: add device_id entry for the AR934X SoCs + +Also make the USB_EHCI_ATH79 selectable for the AR934X SoCs. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: Alan Stern <stern@rowland.harvard.edu> +Cc: Greg Kroah-Hartman <gregkh@suse.de> +Cc: linux-usb@vger.kernel.org +--- + drivers/usb/host/Kconfig | 2 +- + drivers/usb/host/ehci-ath79.c | 4 ++++ + 2 files changed, 5 insertions(+), 1 deletions(-) + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -210,7 +210,7 @@ config USB_CNS3XXX_EHCI + + config USB_EHCI_ATH79 + bool "EHCI support for AR7XXX/AR9XXX SoCs" +- depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) ++ depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X || SOC_AR934X) + select USB_EHCI_ROOT_HUB_TT + default y + ---help--- +--- a/drivers/usb/host/ehci-ath79.c ++++ b/drivers/usb/host/ehci-ath79.c +@@ -37,6 +37,10 @@ static const struct platform_device_id e + .driver_data = EHCI_ATH79_IP_V2, + }, + { ++ .name = "ar934x-ehci", ++ .driver_data = EHCI_ATH79_IP_V2, ++ }, ++ { + /* terminating entry */ + }, + }; diff --git a/target/linux/ar71xx/patches-3.2/201-spi-ath79-add-delay-between-SCK-changes.patch b/target/linux/ar71xx/patches-3.2/201-spi-ath79-add-delay-between-SCK-changes.patch new file mode 100644 index 0000000000..c2681f9a5d --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/201-spi-ath79-add-delay-between-SCK-changes.patch @@ -0,0 +1,42 @@ +From 48b7e765e6e097d20d809fadd17a4355d26ad6d5 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 11 Jan 2012 20:06:35 +0100 +Subject: [PATCH 1/7] spi/ath79: add delay between SCK changes + +The driver uses the "as fast as it can" approach +to drive the SCK signal. However this does not +work with certain low speed SPI chips (e.g. the +PCF2123 RTC chip). Add per-bit slowdowns in order +to be able to use the driver with such chips as +well. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + drivers/spi/spi-ath79.c | 8 ++++++++ + 1 files changed, 8 insertions(+), 0 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -52,6 +52,12 @@ static inline struct ath79_spi *ath79_sp + return spi_master_get_devdata(spi->master); + } + ++static inline void ath79_spi_delay(unsigned nsecs) ++{ ++ if (nsecs) ++ ndelay(nsecs); ++} ++ + static void ath79_spi_chipselect(struct spi_device *spi, int is_active) + { + struct ath79_spi *sp = ath79_spidev_to_sp(spi); +@@ -184,7 +190,9 @@ static u32 ath79_spi_txrx_mode0(struct s + + /* setup MSB (to slave) on trailing edge */ + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); ++ ath79_spi_delay(nsecs); + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); ++ ath79_spi_delay(nsecs); + + word <<= 1; + } diff --git a/target/linux/ar71xx/patches-3.2/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch b/target/linux/ar71xx/patches-3.2/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch new file mode 100644 index 0000000000..0b36ab6573 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch @@ -0,0 +1,20 @@ +From 0ad8cbbb978bc01de08eadd3357ea188302b83ce Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 11 Jan 2012 20:33:41 +0100 +Subject: [PATCH 2/7] spi/ath79: add missing HIGH->LOW SCK transition + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + drivers/spi/spi-ath79.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -193,6 +193,7 @@ static u32 ath79_spi_txrx_mode0(struct s + ath79_spi_delay(nsecs); + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); + ath79_spi_delay(nsecs); ++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); + + word <<= 1; + } diff --git a/target/linux/ar71xx/patches-3.2/203-spi-ath79-remove-superfluous-chip-select-code.patch b/target/linux/ar71xx/patches-3.2/203-spi-ath79-remove-superfluous-chip-select-code.patch new file mode 100644 index 0000000000..a2391be646 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/203-spi-ath79-remove-superfluous-chip-select-code.patch @@ -0,0 +1,30 @@ +From 7385ff2cb72d6a0107890760466b9564aa5204c1 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 9 Jan 2012 15:03:28 +0100 +Subject: [PATCH 3/7] spi/ath79: remove superfluous chip select code + +The spi_bitbang driver calls the chipselect function +of the driver from spi_bitbang_setup in order to +deselect the given SPI chip, so we don't have to +initialize the CS line here. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + drivers/spi/spi-ath79.c | 6 ------ + 1 files changed, 0 insertions(+), 6 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -121,12 +121,6 @@ static int ath79_spi_setup_cs(struct spi + gpio_free(cdata->gpio); + return status; + } +- } else { +- if (spi->mode & SPI_CS_HIGH) +- sp->ioc_base |= AR71XX_SPI_IOC_CS0; +- else +- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; +- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + + return 0; diff --git a/target/linux/ar71xx/patches-3.2/204-spi-ath79-use-gpio_request_one.patch b/target/linux/ar71xx/patches-3.2/204-spi-ath79-use-gpio_request_one.patch new file mode 100644 index 0000000000..0484d3d7f3 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/204-spi-ath79-use-gpio_request_one.patch @@ -0,0 +1,55 @@ +From c5bfb0c760a5d8de7ffc3a6acfb8c782be6af1a5 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 9 Jan 2012 15:04:21 +0100 +Subject: [PATCH 4/7] spi/ath79: use gpio_request_one + +Use gpio_request_one() instead of multiple gpiolib calls. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + drivers/spi/spi-ath79.c | 26 +++++++++++++------------- + 1 files changed, 13 insertions(+), 13 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -93,6 +93,7 @@ static int ath79_spi_setup_cs(struct spi + { + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + struct ath79_spi_controller_data *cdata; ++ int status; + + cdata = spi->controller_data; + if (spi->chip_select && !cdata) +@@ -108,22 +109,21 @@ static int ath79_spi_setup_cs(struct spi + /* TODO: setup speed? */ + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); + ++ status = 0; + if (spi->chip_select) { +- int status = 0; ++ unsigned long flags; + +- status = gpio_request(cdata->gpio, dev_name(&spi->dev)); +- if (status) +- return status; ++ flags = GPIOF_DIR_OUT; ++ if (spi->mode & SPI_CS_HIGH) ++ flags |= GPIOF_INIT_HIGH; ++ else ++ flags |= GPIOF_INIT_LOW; + +- status = gpio_direction_output(cdata->gpio, +- spi->mode & SPI_CS_HIGH); +- if (status) { +- gpio_free(cdata->gpio); +- return status; +- } ++ status = gpio_request_one(cdata->gpio, flags, ++ dev_name(&spi->dev)); + } + +- return 0; ++ return status; + } + + static void ath79_spi_cleanup_cs(struct spi_device *spi) diff --git a/target/linux/ar71xx/patches-3.2/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch b/target/linux/ar71xx/patches-3.2/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch new file mode 100644 index 0000000000..bf18edead7 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/205-spi-ath79-introduce-ath79_spi_-en-dis-able-helpers.patch @@ -0,0 +1,93 @@ +From 4518ae06e5fc953abfd9c2b66c6155fc2b2696ce Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Mon, 9 Jan 2012 15:00:46 +0100 +Subject: [PATCH 5/7] spi/ath79: introduce ath79_spi_{en,dis}able helpers + +--- + drivers/spi/spi-ath79.c | 41 +++++++++++++++++++++++++---------------- + 1 files changed, 25 insertions(+), 16 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -89,16 +89,8 @@ static void ath79_spi_chipselect(struct + + } + +-static int ath79_spi_setup_cs(struct spi_device *spi) ++static void ath79_spi_enable(struct ath79_spi *sp) + { +- struct ath79_spi *sp = ath79_spidev_to_sp(spi); +- struct ath79_spi_controller_data *cdata; +- int status; +- +- cdata = spi->controller_data; +- if (spi->chip_select && !cdata) +- return -EINVAL; +- + /* enable GPIO mode */ + ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); + +@@ -108,6 +100,25 @@ static int ath79_spi_setup_cs(struct spi + + /* TODO: setup speed? */ + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); ++} ++ ++static void ath79_spi_disable(struct ath79_spi *sp) ++{ ++ /* restore CTRL register */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); ++ /* disable GPIO mode */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); ++} ++ ++static int ath79_spi_setup_cs(struct spi_device *spi) ++{ ++ struct ath79_spi *sp = ath79_spidev_to_sp(spi); ++ struct ath79_spi_controller_data *cdata; ++ int status; ++ ++ cdata = spi->controller_data; ++ if (spi->chip_select && !cdata) ++ return -EINVAL; + + status = 0; + if (spi->chip_select) { +@@ -134,11 +145,6 @@ static void ath79_spi_cleanup_cs(struct + struct ath79_spi_controller_data *cdata = spi->controller_data; + gpio_free(cdata->gpio); + } +- +- /* restore CTRL register */ +- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); +- /* disable GPIO mode */ +- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); + } + + static int ath79_spi_setup(struct spi_device *spi) +@@ -242,13 +248,15 @@ static __devinit int ath79_spi_probe(str + goto err_put_master; + } + ++ ath79_spi_enable(sp); + ret = spi_bitbang_start(&sp->bitbang); + if (ret) +- goto err_unmap; ++ goto err_disable; + + return 0; + +-err_unmap: ++err_disable: ++ ath79_spi_disable(sp); + iounmap(sp->base); + err_put_master: + platform_set_drvdata(pdev, NULL); +@@ -262,6 +270,7 @@ static __devexit int ath79_spi_remove(st + struct ath79_spi *sp = platform_get_drvdata(pdev); + + spi_bitbang_stop(&sp->bitbang); ++ ath79_spi_disable(sp); + iounmap(sp->base); + platform_set_drvdata(pdev, NULL); + spi_master_put(sp->bitbang.master); diff --git a/target/linux/ar71xx/patches-3.2/206-spi-ath79-add-shutdown-handler.patch b/target/linux/ar71xx/patches-3.2/206-spi-ath79-add-shutdown-handler.patch new file mode 100644 index 0000000000..555d6fd790 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/206-spi-ath79-add-shutdown-handler.patch @@ -0,0 +1,45 @@ +From 1025bfbe327b3f9f7227e781c71751d5251803cb Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 11 Jan 2012 22:19:32 +0100 +Subject: [PATCH 6/7] spi/ath79: add shutdown handler + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + drivers/spi/spi-ath79.c | 12 +++++++++++- + 1 files changed, 11 insertions(+), 1 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -265,7 +265,7 @@ err_put_master: + return ret; + } + +-static __devexit int ath79_spi_remove(struct platform_device *pdev) ++static void __ath79_spi_remove(struct platform_device *pdev) + { + struct ath79_spi *sp = platform_get_drvdata(pdev); + +@@ -274,13 +274,23 @@ static __devexit int ath79_spi_remove(st + iounmap(sp->base); + platform_set_drvdata(pdev, NULL); + spi_master_put(sp->bitbang.master); ++} + ++static __devexit int ath79_spi_remove(struct platform_device *pdev) ++{ ++ __ath79_spi_remove(pdev); + return 0; + } + ++static void ath79_spi_shutdown(struct platform_device *pdev) ++{ ++ __ath79_spi_remove(pdev); ++} ++ + static struct platform_driver ath79_spi_driver = { + .probe = ath79_spi_probe, + .remove = __devexit_p(ath79_spi_remove), ++ .shutdown = ath79_spi_shutdown, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, diff --git a/target/linux/ar71xx/patches-3.2/207-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.2/207-spi-ath79-make-chipselect-logic-more-flexible.patch new file mode 100644 index 0000000000..7c45b73f1f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/207-spi-ath79-make-chipselect-logic-more-flexible.patch @@ -0,0 +1,165 @@ +From b875f877d06acb852342636db4c3d1e6c9fe01ba Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 11 Jan 2012 22:25:11 +0100 +Subject: [PATCH 7/7] spi/ath79: make chipselect logic more flexible + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++- + drivers/spi/spi-ath79.c | 65 +++++++++++-------- + 2 files changed, 45 insertions(+), 28 deletions(-) + +--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h ++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h +@@ -16,8 +16,14 @@ struct ath79_spi_platform_data { + unsigned num_chipselect; + }; + ++enum ath79_spi_cs_type { ++ ATH79_SPI_CS_TYPE_INTERNAL, ++ ATH79_SPI_CS_TYPE_GPIO, ++}; ++ + struct ath79_spi_controller_data { +- unsigned gpio; ++ enum ath79_spi_cs_type cs_type; ++ unsigned cs_line; + }; + + #endif /* _ATH79_SPI_PLATFORM_H */ +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -30,6 +30,8 @@ + + #define DRV_NAME "ath79-spi" + ++#define ATH79_SPI_CS_LINE_MAX 2 ++ + struct ath79_spi { + struct spi_bitbang bitbang; + u32 ioc_base; +@@ -62,6 +64,7 @@ static void ath79_spi_chipselect(struct + { + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; ++ struct ath79_spi_controller_data *cdata = spi->controller_data; + + if (is_active) { + /* set initial clock polarity */ +@@ -73,20 +76,21 @@ static void ath79_spi_chipselect(struct + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + +- if (spi->chip_select) { +- struct ath79_spi_controller_data *cdata = spi->controller_data; +- +- /* SPI is normally active-low */ +- gpio_set_value(cdata->gpio, cs_high); +- } else { ++ switch (cdata->cs_type) { ++ case ATH79_SPI_CS_TYPE_INTERNAL: + if (cs_high) +- sp->ioc_base |= AR71XX_SPI_IOC_CS0; ++ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line); + else +- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; ++ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line); + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); +- } ++ break; + ++ case ATH79_SPI_CS_TYPE_GPIO: ++ /* SPI is normally active-low */ ++ gpio_set_value(cdata->cs_line, cs_high); ++ break; ++ } + } + + static void ath79_spi_enable(struct ath79_spi *sp) +@@ -114,24 +118,30 @@ static int ath79_spi_setup_cs(struct spi + { + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + struct ath79_spi_controller_data *cdata; ++ unsigned long flags; + int status; + + cdata = spi->controller_data; +- if (spi->chip_select && !cdata) ++ if (!cdata) + return -EINVAL; + + status = 0; +- if (spi->chip_select) { +- unsigned long flags; ++ switch (cdata->cs_type) { ++ case ATH79_SPI_CS_TYPE_INTERNAL: ++ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX) ++ status = -EINVAL; ++ break; + ++ case ATH79_SPI_CS_TYPE_GPIO: + flags = GPIOF_DIR_OUT; + if (spi->mode & SPI_CS_HIGH) + flags |= GPIOF_INIT_HIGH; + else + flags |= GPIOF_INIT_LOW; + +- status = gpio_request_one(cdata->gpio, flags, ++ status = gpio_request_one(cdata->cs_line, flags, + dev_name(&spi->dev)); ++ break; + } + + return status; +@@ -139,11 +149,15 @@ static int ath79_spi_setup_cs(struct spi + + static void ath79_spi_cleanup_cs(struct spi_device *spi) + { +- struct ath79_spi *sp = ath79_spidev_to_sp(spi); ++ struct ath79_spi_controller_data *cdata = spi->controller_data; + +- if (spi->chip_select) { +- struct ath79_spi_controller_data *cdata = spi->controller_data; +- gpio_free(cdata->gpio); ++ switch (cdata->cs_type) { ++ case ATH79_SPI_CS_TYPE_INTERNAL: ++ /* nothing to do */ ++ break; ++ case ATH79_SPI_CS_TYPE_GPIO: ++ gpio_free(cdata->cs_line); ++ break; + } + } + +@@ -209,6 +223,10 @@ static __devinit int ath79_spi_probe(str + struct resource *r; + int ret; + ++ pdata = pdev->dev.platform_data; ++ if (!pdata) ++ return -EINVAL; ++ + master = spi_alloc_master(&pdev->dev, sizeof(*sp)); + if (master == NULL) { + dev_err(&pdev->dev, "failed to allocate spi master\n"); +@@ -218,17 +236,10 @@ static __devinit int ath79_spi_probe(str + sp = spi_master_get_devdata(master); + platform_set_drvdata(pdev, sp); + +- pdata = pdev->dev.platform_data; +- + master->setup = ath79_spi_setup; + master->cleanup = ath79_spi_cleanup; +- if (pdata) { +- master->bus_num = pdata->bus_num; +- master->num_chipselect = pdata->num_chipselect; +- } else { +- master->bus_num = -1; +- master->num_chipselect = 1; +- } ++ master->bus_num = pdata->bus_num; ++ master->num_chipselect = pdata->num_chipselect; + + sp->bitbang.master = spi_master_get(master); + sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/target/linux/ar71xx/patches-3.2/208-spi-ath79-make-chip-select-more-flexible.patch b/target/linux/ar71xx/patches-3.2/208-spi-ath79-make-chip-select-more-flexible.patch new file mode 100644 index 0000000000..ed7b360d9c --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/208-spi-ath79-make-chip-select-more-flexible.patch @@ -0,0 +1,105 @@ +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi + } + }; + ++static struct ath79_spi_controller_data ap121_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info ap121_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l1606e", ++ .controller_data = &ap121_spi0_data, + } + }; + +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio + } + }; + ++static struct ath79_spi_controller_data ap81_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info ap81_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p64", ++ .controller_data = &ap81_spi0_data, + } + }; + +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -95,12 +95,18 @@ static struct gpio_keys_button db120_gpi + }, + }; + ++static struct ath79_spi_controller_data db120_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info db120_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "s25sl064a", ++ .controller_data = &db120_spi0_data, + } + }; + +--- a/arch/mips/ath79/mach-pb44.c ++++ b/arch/mips/ath79/mach-pb44.c +@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio + } + }; + ++static struct ath79_spi_controller_data pb44_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info pb44_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p64", ++ .controller_data = &pb44_spi0_data, + }, + }; + +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g + } + }; + ++static struct ath79_spi_controller_data ubnt_xm_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info ubnt_xm_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l6405d", ++ .controller_data = &ubnt_xm_spi0_data, + } + }; + diff --git a/target/linux/ar71xx/patches-3.2/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch b/target/linux/ar71xx/patches-3.2/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch new file mode 100644 index 0000000000..ca0d3cc701 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch @@ -0,0 +1,27 @@ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) + + if (soc_is_ar71xx()) + ath79_gpio_count = AR71XX_GPIO_COUNT; +- else if (soc_is_ar724x()) +- ath79_gpio_count = AR724X_GPIO_COUNT; ++ else if (soc_is_ar7240()) ++ ath79_gpio_count = AR7240_GPIO_COUNT; ++ else if (soc_is_ar7241() || soc_is_ar7242()) ++ ath79_gpio_count = AR7241_GPIO_COUNT; + else if (soc_is_ar913x()) + ath79_gpio_count = AR913X_GPIO_COUNT; + else if (soc_is_ar933x()) +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -428,7 +428,8 @@ + #define AR71XX_GPIO_REG_FUNC 0x28 + + #define AR71XX_GPIO_COUNT 16 +-#define AR724X_GPIO_COUNT 18 ++#define AR7240_GPIO_COUNT 18 ++#define AR7241_GPIO_COUNT 20 + #define AR913X_GPIO_COUNT 22 + #define AR933X_GPIO_COUNT 30 + #define AR934X_GPIO_COUNT 23 diff --git a/target/linux/ar71xx/patches-3.2/211-MIPS-ath79-fix-ar933x_wmac_reset.patch b/target/linux/ar71xx/patches-3.2/211-MIPS-ath79-fix-ar933x_wmac_reset.patch new file mode 100644 index 0000000000..9438844f29 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/211-MIPS-ath79-fix-ar933x_wmac_reset.patch @@ -0,0 +1,12 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -62,8 +62,8 @@ static void __init ar913x_wmac_setup(voi + + static int ar933x_wmac_reset(void) + { +- ath79_device_reset_clear(AR933X_RESET_WMAC); + ath79_device_reset_set(AR933X_RESET_WMAC); ++ ath79_device_reset_clear(AR933X_RESET_WMAC); + + return 0; + } diff --git a/target/linux/ar71xx/patches-3.2/300-leds-rb750-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/300-leds-rb750-3.2-fixes.patch new file mode 100644 index 0000000000..96aa7c50b0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/300-leds-rb750-3.2-fixes.patch @@ -0,0 +1,17 @@ +--- a/drivers/leds/leds-rb750.c ++++ b/drivers/leds/leds-rb750.c +@@ -9,12 +9,13 @@ + * + */ + #include <linux/kernel.h> ++#include <linux/module.h> + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/leds.h> + #include <linux/slab.h> + +-#include <asm/mach-ar71xx/mach-rb750.h> ++#include <asm/mach-ath79/mach-rb750.h> + + #define DRV_NAME "leds-rb750" + diff --git a/target/linux/ar71xx/patches-3.2/301-leds-wndr3700-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/301-leds-wndr3700-3.2-fixes.patch new file mode 100644 index 0000000000..5171e909dc --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/301-leds-wndr3700-3.2-fixes.patch @@ -0,0 +1,30 @@ +--- a/drivers/leds/leds-wndr3700-usb.c ++++ b/drivers/leds/leds-wndr3700-usb.c +@@ -12,7 +12,8 @@ + #include <linux/module.h> + #include <linux/platform_device.h> + +-#include <asm/mach-ar71xx/ar71xx.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ath79.h> + + #define DRIVER_NAME "wndr3700-led-usb" + +@@ -20,14 +21,14 @@ static void wndr3700_usb_led_set(struct + enum led_brightness brightness) + { + if (brightness) +- ar71xx_device_start(RESET_MODULE_GE1_PHY); ++ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); + else +- ar71xx_device_stop(RESET_MODULE_GE1_PHY); ++ ath79_device_reset_set(AR71XX_RESET_GE1_PHY); + } + + static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev) + { +- return ar71xx_device_stopped(RESET_MODULE_GE1_PHY) ? LED_OFF : LED_FULL; ++ return ath79_device_reset_get(AR71XX_RESET_GE1_PHY) ? LED_OFF : LED_FULL; + } + + static struct led_classdev wndr3700_usb_led = { diff --git a/target/linux/ar71xx/patches-3.2/302-rb4xx_nand-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/302-rb4xx_nand-3.2-fixes.patch new file mode 100644 index 0000000000..0a133f0ce1 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/302-rb4xx_nand-3.2-fixes.patch @@ -0,0 +1,36 @@ +--- a/drivers/mtd/nand/rb4xx_nand.c ++++ b/drivers/mtd/nand/rb4xx_nand.c +@@ -12,6 +12,8 @@ + * by the Free Software Foundation. + */ + ++#include <linux/kernel.h> ++#include <linux/module.h> + #include <linux/init.h> + #include <linux/mtd/nand.h> + #include <linux/mtd/mtd.h> +@@ -22,8 +24,8 @@ + #include <linux/gpio.h> + #include <linux/slab.h> + +-#include <asm/mach-ar71xx/ar71xx.h> +-#include <asm/mach-ar71xx/rb4xx_cpld.h> ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/rb4xx_cpld.h> + + #define DRV_NAME "rb4xx-nand" + #define DRV_VERSION "0.2.0" +@@ -238,12 +240,8 @@ static int __devinit rb4xx_nand_probe(st + goto err_set_drvdata; + } + +-#ifdef CONFIG_MTD_PARTITIONS +- ret = add_mtd_partitions(&info->mtd, rb4xx_nand_partitions, ++ mtd_device_register(&info->mtd, rb4xx_nand_partitions, + ARRAY_SIZE(rb4xx_nand_partitions)); +-#else +- ret = add_mtd_device(&info->mtd); +-#endif + if (ret) + goto err_release_nand; + diff --git a/target/linux/ar71xx/patches-3.2/303-rb750_nand-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/303-rb750_nand-3.2-fixes.patch new file mode 100644 index 0000000000..b0434e29a7 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/303-rb750_nand-3.2-fixes.patch @@ -0,0 +1,122 @@ +--- a/drivers/mtd/nand/rb750_nand.c ++++ b/drivers/mtd/nand/rb750_nand.c +@@ -1,14 +1,15 @@ + /* + * NAND flash driver for the MikroTik RouterBOARD 750 + * +- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +-#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/module.h> + #include <linux/mtd/nand.h> + #include <linux/mtd/mtd.h> + #include <linux/mtd/partitions.h> +@@ -16,8 +17,9 @@ + #include <linux/io.h> + #include <linux/slab.h> + +-#include <asm/mach-ar71xx/ar71xx.h> +-#include <asm/mach-ar71xx/mach-rb750.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ath79.h> ++#include <asm/mach-ath79/mach-rb750.h> + + #define DRV_NAME "rb750-nand" + #define DRV_VERSION "0.1.0" +@@ -73,7 +75,7 @@ static struct mtd_partition rb750_nand_p + + static void rb750_nand_write(const u8 *buf, unsigned len) + { +- void __iomem *base = ar71xx_gpio_base; ++ void __iomem *base = ath79_gpio_base; + u32 out; + u32 t; + unsigned i; +@@ -107,7 +109,7 @@ static void rb750_nand_write(const u8 *b + static int rb750_nand_read_verify(u8 *read_buf, unsigned len, + const u8 *verify_buf) + { +- void __iomem *base = ar71xx_gpio_base; ++ void __iomem *base = ath79_gpio_base; + unsigned i; + + for (i = 0; i < len; i++) { +@@ -136,7 +138,7 @@ static int rb750_nand_read_verify(u8 *re + + static void rb750_nand_select_chip(struct mtd_info *mtd, int chip) + { +- void __iomem *base = ar71xx_gpio_base; ++ void __iomem *base = ath79_gpio_base; + u32 func; + u32 t; + +@@ -145,9 +147,7 @@ static void rb750_nand_select_chip(struc + /* disable latch */ + rb750_latch_change(RB750_LVC573_LE, 0); + +- /* disable alternate functions */ +- ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, +- AR724X_GPIO_FUNC_SPI_EN); ++ rb750_nand_pins_enable(); + + /* set input mode for data lines */ + t = __raw_readl(base + AR71XX_GPIO_REG_OE); +@@ -172,9 +172,7 @@ static void rb750_nand_select_chip(struc + __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY, + base + AR71XX_GPIO_REG_OE); + +- /* restore alternate functions */ +- ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN, +- AR724X_GPIO_FUNC_JTAG_DISABLE); ++ rb750_nand_pins_disable(); + + /* enable latch */ + rb750_latch_change(0, RB750_LVC573_LE); +@@ -183,7 +181,7 @@ static void rb750_nand_select_chip(struc + + static int rb750_nand_dev_ready(struct mtd_info *mtd) + { +- void __iomem *base = ar71xx_gpio_base; ++ void __iomem *base = ath79_gpio_base; + + return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY); + } +@@ -192,7 +190,7 @@ static void rb750_nand_cmd_ctrl(struct m + unsigned int ctrl) + { + if (ctrl & NAND_CTRL_CHANGE) { +- void __iomem *base = ar71xx_gpio_base; ++ void __iomem *base = ath79_gpio_base; + u32 t; + + t = __raw_readl(base + AR71XX_GPIO_REG_OUT); +@@ -236,7 +234,7 @@ static int rb750_nand_verify_buf(struct + + static void __init rb750_nand_gpio_init(void) + { +- void __iomem *base = ar71xx_gpio_base; ++ void __iomem *base = ath79_gpio_base; + u32 out; + u32 t; + +@@ -306,12 +304,8 @@ static int __devinit rb750_nand_probe(st + goto err_set_drvdata; + } + +-#ifdef CONFIG_MTD_PARTITIONS +- ret = add_mtd_partitions(&info->mtd, rb750_nand_partitions, ++ ret = mtd_device_register(&info->mtd, rb750_nand_partitions, + ARRAY_SIZE(rb750_nand_partitions)); +-#else +- ret = add_mtd_device(&info->mtd); +-#endif + if (ret) + goto err_release_nand; + diff --git a/target/linux/ar71xx/patches-3.2/304-spi-ap83-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/304-spi-ap83-3.2-fixes.patch new file mode 100644 index 0000000000..7a9d686f24 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/304-spi-ap83-3.2-fixes.patch @@ -0,0 +1,47 @@ +--- a/drivers/spi/spi-ap83.c ++++ b/drivers/spi/spi-ap83.c +@@ -10,6 +10,7 @@ + */ + + #include <linux/kernel.h> ++#include <linux/module.h> + #include <linux/init.h> + #include <linux/delay.h> + #include <linux/spinlock.h> +@@ -21,8 +22,7 @@ + #include <linux/bitops.h> + #include <linux/gpio.h> + +-#include <asm/mach-ar71xx/ar71xx.h> +-#include <asm/mach-ar71xx/platform.h> ++#include <asm/mach-ath79/ath79.h> + + #define DRV_DESC "Atheros AP83 board SPI Controller driver" + #define DRV_VERSION "0.1.0" +@@ -106,7 +106,7 @@ static void ap83_spi_chipselect(struct s + dev_dbg(&spi->dev, "set CS to %d\n", (on) ? 0 : 1); + + if (on) { +- ar71xx_flash_acquire(); ++ ath79_flash_acquire(); + + sp->addr = 0; + ap83_spi_rr(sp, sp->addr); +@@ -114,7 +114,7 @@ static void ap83_spi_chipselect(struct s + gpio_set_value(AP83_SPI_GPIO_CS, 0); + } else { + gpio_set_value(AP83_SPI_GPIO_CS, 1); +- ar71xx_flash_release(); ++ ath79_flash_release(); + } + } + +@@ -127,7 +127,7 @@ static void ap83_spi_chipselect(struct s + + #define EXPAND_BITBANG_TXRX + #include <linux/spi/spi_bitbang.h> +-#include "spi_bitbang_txrx.h" ++#include "spi-bitbang-txrx.h" + + static u32 ap83_spi_txrx_mode0(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) diff --git a/target/linux/ar71xx/patches-3.2/305-spi-rb4xx-cpld-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/305-spi-rb4xx-cpld-3.2-fixes.patch new file mode 100644 index 0000000000..4bc73ce268 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/305-spi-rb4xx-cpld-3.2-fixes.patch @@ -0,0 +1,19 @@ +--- a/drivers/spi/spi-rb4xx-cpld.c ++++ b/drivers/spi/spi-rb4xx-cpld.c +@@ -13,6 +13,7 @@ + + #include <linux/types.h> + #include <linux/kernel.h> ++#include <linux/module.h> + #include <linux/init.h> + #include <linux/module.h> + #include <linux/device.h> +@@ -21,7 +22,7 @@ + #include <linux/gpio.h> + #include <linux/slab.h> + +-#include <asm/mach-ar71xx/rb4xx_cpld.h> ++#include <asm/mach-ath79/rb4xx_cpld.h> + + #define DRV_NAME "spi-rb4xx-cpld" + #define DRV_DESC "RB4xx CPLD driver" diff --git a/target/linux/ar71xx/patches-3.2/306-spi-rb4xx-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/306-spi-rb4xx-3.2-fixes.patch new file mode 100644 index 0000000000..cd154324d9 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/306-spi-rb4xx-3.2-fixes.patch @@ -0,0 +1,261 @@ +--- a/drivers/spi/spi-rb4xx.c ++++ b/drivers/spi/spi-rb4xx.c +@@ -12,7 +12,10 @@ + * + */ + ++#include <linux/clk.h> ++#include <linux/err.h> + #include <linux/kernel.h> ++#include <linux/module.h> + #include <linux/init.h> + #include <linux/delay.h> + #include <linux/spinlock.h> +@@ -20,7 +23,8 @@ + #include <linux/platform_device.h> + #include <linux/spi/spi.h> + +-#include <asm/mach-ar71xx/ar71xx.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ath79.h> + + #define DRV_NAME "rb4xx-spi" + #define DRV_DESC "Mikrotik RB4xx SPI controller driver" +@@ -41,13 +45,16 @@ struct rb4xx_spi { + unsigned spi_ctrl_flash; + unsigned spi_ctrl_fread; + ++ struct clk *ahb_clk; ++ unsigned long ahb_freq; ++ + spinlock_t lock; + struct list_head queue; + int busy:1; + int cs_wait; + }; + +-static unsigned spi_clk_low = SPI_IOC_CS1; ++static unsigned spi_clk_low = AR71XX_SPI_IOC_CS1; + + #ifdef RB4XX_SPI_DEBUG + static inline void do_spi_delay(void) +@@ -60,10 +67,11 @@ static inline void do_spi_delay(void) { + + static inline void do_spi_init(struct spi_device *spi) + { +- unsigned cs = SPI_IOC_CS0 | SPI_IOC_CS1; ++ unsigned cs = AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1; + + if (!(spi->mode & SPI_CS_HIGH)) +- cs ^= (spi->chip_select == 2) ? SPI_IOC_CS1 : SPI_IOC_CS0; ++ cs ^= (spi->chip_select == 2) ? AR71XX_SPI_IOC_CS1 : ++ AR71XX_SPI_IOC_CS0; + + spi_clk_low = cs; + } +@@ -71,17 +79,18 @@ static inline void do_spi_init(struct sp + static inline void do_spi_finish(void __iomem *base) + { + do_spi_delay(); +- __raw_writel(SPI_IOC_CS0 | SPI_IOC_CS1, base + SPI_REG_IOC); ++ __raw_writel(AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1, ++ base + AR71XX_SPI_REG_IOC); + } + + static inline void do_spi_clk(void __iomem *base, int bit) + { +- unsigned bval = spi_clk_low | ((bit & 1) ? SPI_IOC_DO : 0); ++ unsigned bval = spi_clk_low | ((bit & 1) ? AR71XX_SPI_IOC_DO : 0); + + do_spi_delay(); +- __raw_writel(bval, base + SPI_REG_IOC); ++ __raw_writel(bval, base + AR71XX_SPI_REG_IOC); + do_spi_delay(); +- __raw_writel(bval | SPI_IOC_CLK, base + SPI_REG_IOC); ++ __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC); + } + + static void do_spi_byte(void __iomem *base, unsigned char byte) +@@ -97,19 +106,19 @@ static void do_spi_byte(void __iomem *ba + + pr_debug("spi_byte sent 0x%02x got 0x%02x\n", + (unsigned)byte, +- (unsigned char)__raw_readl(base + SPI_REG_RDS)); ++ (unsigned char)__raw_readl(base + AR71XX_SPI_REG_RDS)); + } + + static inline void do_spi_clk_fast(void __iomem *base, unsigned bit1, + unsigned bit2) + { + unsigned bval = (spi_clk_low | +- ((bit1 & 1) ? SPI_IOC_DO : 0) | +- ((bit2 & 1) ? SPI_IOC_CS2 : 0)); ++ ((bit1 & 1) ? AR71XX_SPI_IOC_DO : 0) | ++ ((bit2 & 1) ? AR71XX_SPI_IOC_CS2 : 0)); + do_spi_delay(); +- __raw_writel(bval, base + SPI_REG_IOC); ++ __raw_writel(bval, base + AR71XX_SPI_REG_IOC); + do_spi_delay(); +- __raw_writel(bval | SPI_IOC_CLK, base + SPI_REG_IOC); ++ __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC); + } + + static void do_spi_byte_fast(void __iomem *base, unsigned char byte) +@@ -121,7 +130,7 @@ static void do_spi_byte_fast(void __iome + + pr_debug("spi_byte_fast sent 0x%02x got 0x%02x\n", + (unsigned)byte, +- (unsigned char) __raw_readl(base + SPI_REG_RDS)); ++ (unsigned char) __raw_readl(base + AR71XX_SPI_REG_RDS)); + } + + static int rb4xx_spi_txrx(void __iomem *base, struct spi_transfer *t) +@@ -150,9 +159,9 @@ static int rb4xx_spi_txrx(void __iomem * + do_spi_byte(base, sdata); + + if (rx_ptr) { +- rx_ptr[i] = __raw_readl(base + SPI_REG_RDS) & 0xff; ++ rx_ptr[i] = __raw_readl(base + AR71XX_SPI_REG_RDS) & 0xff; + } else if (rxv_ptr) { +- unsigned char c = __raw_readl(base + SPI_REG_RDS); ++ unsigned char c = __raw_readl(base + AR71XX_SPI_REG_RDS); + if (rxv_ptr[i] != c) + return i; + } +@@ -201,9 +210,9 @@ static int rb4xx_spi_read_fast(struct rb + if (t->tx_buf && !t->verify) + return -1; + +- __raw_writel(SPI_FS_GPIO, base + SPI_REG_FS); +- __raw_writel(rbspi->spi_ctrl_fread, base + SPI_REG_CTRL); +- __raw_writel(0, base + SPI_REG_FS); ++ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS); ++ __raw_writel(rbspi->spi_ctrl_fread, base + AR71XX_SPI_REG_CTRL); ++ __raw_writel(0, base + AR71XX_SPI_REG_FS); + + if (t->rx_buf) { + memcpy(t->rx_buf, (const void *)addr, t->len); +@@ -216,9 +225,9 @@ static int rb4xx_spi_read_fast(struct rb + m->actual_length += t->len; + + if (rbspi->spi_ctrl_flash != rbspi->spi_ctrl_fread) { +- __raw_writel(SPI_FS_GPIO, base + SPI_REG_FS); +- __raw_writel(rbspi->spi_ctrl_flash, base + SPI_REG_CTRL); +- __raw_writel(0, base + SPI_REG_FS); ++ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS); ++ __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL); ++ __raw_writel(0, base + AR71XX_SPI_REG_FS); + } + + return 0; +@@ -237,8 +246,8 @@ static int rb4xx_spi_msg(struct rb4xx_sp + if (rb4xx_spi_read_fast(rbspi, m) == 0) + return -1; + +- __raw_writel(SPI_FS_GPIO, base + SPI_REG_FS); +- __raw_writel(SPI_CTRL_FASTEST, base + SPI_REG_CTRL); ++ __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS); ++ __raw_writel(SPI_CTRL_FASTEST, base + AR71XX_SPI_REG_CTRL); + do_spi_init(m->spi); + + list_for_each_entry(t, &m->transfers, transfer_list) { +@@ -262,8 +271,8 @@ static int rb4xx_spi_msg(struct rb4xx_sp + } + + do_spi_finish(base); +- __raw_writel(rbspi->spi_ctrl_flash, base + SPI_REG_CTRL); +- __raw_writel(0, base + SPI_REG_FS); ++ __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL); ++ __raw_writel(0, base + AR71XX_SPI_REG_FS); + return -1; + } + +@@ -352,11 +361,12 @@ static int rb4xx_spi_setup(struct spi_de + return 0; + } + +-static unsigned get_spi_ctrl(unsigned hz_max, const char *name) ++static unsigned get_spi_ctrl(struct rb4xx_spi *rbspi, unsigned hz_max, ++ const char *name) + { + unsigned div; + +- div = (ar71xx_ahb_freq - 1) / (2 * hz_max); ++ div = (rbspi->ahb_freq - 1) / (2 * hz_max); + + /* + * CPU has a bug at (div == 0) - first bit read is random +@@ -365,7 +375,7 @@ static unsigned get_spi_ctrl(unsigned hz + ++div; + + if (name) { +- unsigned ahb_khz = (ar71xx_ahb_freq + 500) / 1000; ++ unsigned ahb_khz = (rbspi->ahb_freq + 500) / 1000; + unsigned div_real = 2 * (div + 1); + pr_debug("rb4xx: %s SPI clock %u kHz (AHB %u kHz / %u)\n", + name, +@@ -396,23 +406,40 @@ static int rb4xx_spi_probe(struct platfo + master->transfer = rb4xx_spi_transfer; + + rbspi = spi_master_get_devdata(master); ++ ++ rbspi->ahb_clk = clk_get(&pdev->dev, "AHB"); ++ if (IS_ERR(rbspi->ahb_clk)) { ++ err = PTR_ERR(rbspi->ahb_clk); ++ goto err_put_master; ++ } ++ ++ err = clk_enable(rbspi->ahb_clk); ++ if (err) ++ goto err_clk_put; ++ ++ rbspi->ahb_freq = clk_get_rate(rbspi->ahb_clk); ++ if (!rbspi->ahb_freq) { ++ err = -EINVAL; ++ goto err_clk_disable; ++ } ++ + platform_set_drvdata(pdev, rbspi); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + err = -ENOENT; +- goto err_put_master; ++ goto err_clk_disable; + } + + rbspi->base = ioremap(r->start, r->end - r->start + 1); + if (!rbspi->base) { + err = -ENXIO; +- goto err_put_master; ++ goto err_clk_disable; + } + + rbspi->master = master; +- rbspi->spi_ctrl_flash = get_spi_ctrl(SPI_FLASH_HZ, "FLASH"); +- rbspi->spi_ctrl_fread = get_spi_ctrl(SPI_CPLD_HZ, "CPLD"); ++ rbspi->spi_ctrl_flash = get_spi_ctrl(rbspi, SPI_FLASH_HZ, "FLASH"); ++ rbspi->spi_ctrl_fread = get_spi_ctrl(rbspi, SPI_CPLD_HZ, "CPLD"); + rbspi->cs_wait = -1; + + spin_lock_init(&rbspi->lock); +@@ -428,6 +455,10 @@ static int rb4xx_spi_probe(struct platfo + + err_iounmap: + iounmap(rbspi->base); ++err_clk_disable: ++ clk_disable(rbspi->ahb_clk); ++err_clk_put: ++ clk_put(rbspi->ahb_clk); + err_put_master: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); +@@ -440,6 +471,8 @@ static int rb4xx_spi_remove(struct platf + struct rb4xx_spi *rbspi = platform_get_drvdata(pdev); + + iounmap(rbspi->base); ++ clk_disable(rbspi->ahb_clk); ++ clk_put(rbspi->ahb_clk); + platform_set_drvdata(pdev, NULL); + spi_master_put(rbspi->master); + diff --git a/target/linux/ar71xx/patches-3.2/307-tplinkpart-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/307-tplinkpart-3.2-fixes.patch new file mode 100644 index 0000000000..6c0aab8fc7 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/307-tplinkpart-3.2-fixes.patch @@ -0,0 +1,11 @@ +--- a/drivers/mtd/tplinkpart.c ++++ b/drivers/mtd/tplinkpart.c +@@ -108,7 +108,7 @@ static int tplink_check_rootfs_magic(str + + static int tplink_parse_partitions(struct mtd_info *master, + struct mtd_partition **pparts, +- unsigned long origin) ++ struct mtd_part_parser_data *data) + { + struct mtd_partition *parts; + struct tplink_fw_header *header; diff --git a/target/linux/ar71xx/patches-3.2/308-wrt160nl_part-3.2-fixes.patch b/target/linux/ar71xx/patches-3.2/308-wrt160nl_part-3.2-fixes.patch new file mode 100644 index 0000000000..d4d68400dd --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/308-wrt160nl_part-3.2-fixes.patch @@ -0,0 +1,11 @@ +--- a/drivers/mtd/wrt160nl_part.c ++++ b/drivers/mtd/wrt160nl_part.c +@@ -85,7 +85,7 @@ static struct mtd_partition trx_parts[TR + + static int wrt160nl_parse_partitions(struct mtd_info *master, + struct mtd_partition **pparts, +- unsigned long origin) ++ struct mtd_part_parser_data *data) + { + struct wrt160nl_header *header; + struct trx_header *theader; diff --git a/target/linux/ar71xx/patches-3.2/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.2/401-mtd-physmap-add-lock-unlock.patch new file mode 100644 index 0000000000..61c3384eb9 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/401-mtd-physmap-add-lock-unlock.patch @@ -0,0 +1,94 @@ +--- a/drivers/mtd/maps/physmap.c ++++ b/drivers/mtd/maps/physmap.c +@@ -29,6 +29,66 @@ struct physmap_flash_info { + struct map_info map[MAX_RESOURCES]; + }; + ++static struct platform_device *physmap_map2pdev(struct map_info *map) ++{ ++ return (struct platform_device *) map->map_priv_1; ++} ++ ++static void physmap_lock(struct map_info *map) ++{ ++ struct platform_device *pdev; ++ struct physmap_flash_data *physmap_data; ++ ++ pdev = physmap_map2pdev(map); ++ physmap_data = pdev->dev.platform_data; ++ physmap_data->lock(pdev); ++} ++ ++static void physmap_unlock(struct map_info *map) ++{ ++ struct platform_device *pdev; ++ struct physmap_flash_data *physmap_data; ++ ++ pdev = physmap_map2pdev(map); ++ physmap_data = pdev->dev.platform_data; ++ physmap_data->unlock(pdev); ++} ++ ++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs) ++{ ++ map_word ret; ++ ++ physmap_lock(map); ++ ret = inline_map_read(map, ofs); ++ physmap_unlock(map); ++ ++ return ret; ++} ++ ++static void physmap_flash_write_lock(struct map_info *map, map_word d, ++ unsigned long ofs) ++{ ++ physmap_lock(map); ++ inline_map_write(map, d, ofs); ++ physmap_unlock(map); ++} ++ ++static void physmap_flash_copy_from_lock(struct map_info *map, void *to, ++ unsigned long from, ssize_t len) ++{ ++ physmap_lock(map); ++ inline_map_copy_from(map, to, from, len); ++ physmap_unlock(map); ++} ++ ++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to, ++ const void *from, ssize_t len) ++{ ++ physmap_lock(map); ++ inline_map_copy_to(map, to, from, len); ++ physmap_unlock(map); ++} ++ + static int physmap_flash_remove(struct platform_device *dev) + { + struct physmap_flash_info *info; +@@ -140,6 +200,13 @@ static int physmap_flash_probe(struct pl + + simple_map_init(&info->map[i]); + ++ if (physmap_data->lock && physmap_data->unlock) { ++ info->map[i].read = physmap_flash_read_lock; ++ info->map[i].write = physmap_flash_write_lock; ++ info->map[i].copy_from = physmap_flash_copy_from_lock; ++ info->map[i].copy_to = physmap_flash_copy_to_lock; ++ } ++ + probe_type = rom_probe_types; + if (physmap_data->probe_type == NULL) { + for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) +--- a/include/linux/mtd/physmap.h ++++ b/include/linux/mtd/physmap.h +@@ -26,6 +26,8 @@ struct physmap_flash_data { + unsigned int width; + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); ++ void (*lock)(struct platform_device *); ++ void (*unlock)(struct platform_device *); + void (*set_vpp)(struct platform_device *, int); + unsigned int nr_parts; + unsigned int pfow_base; diff --git a/target/linux/ar71xx/patches-3.2/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.2/402-mtd-SST39VF6401B-support.patch new file mode 100644 index 0000000000..246abd5dc0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/402-mtd-SST39VF6401B-support.patch @@ -0,0 +1,29 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -148,6 +148,7 @@ + #define SST39LF160 0x2782 + #define SST39VF1601 0x234b + #define SST39VF3201 0x235b ++#define SST39VF6401B 0x236d + #define SST39WF1601 0x274b + #define SST39WF1602 0x274a + #define SST39LF512 0x00D4 +@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec + ERASEINFO(0x10000,64), + } + }, { ++ .mfr_id = CFI_MFR_SST, ++ .dev_id = SST39VF6401B, ++ .name = "SST 39VF6401B", ++ .devtypes = CFI_DEVICETYPE_X16, ++ .uaddr = MTD_UADDR_0xAAAA_0x5555, ++ .dev_size = SIZE_8MiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x10000,128) ++ } ++ }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29F800AB, + .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-3.2/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.2/403-mtd_fix_cfi_cmdset_0002_status_check.patch new file mode 100644 index 0000000000..9ed059822b --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/403-mtd_fix_cfi_cmdset_0002_status_check.patch @@ -0,0 +1,69 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1214,8 +1214,8 @@ static int __xipram do_write_oneword(str + break; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, datum)) ++ goto enable_xip; + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); +@@ -1231,6 +1231,8 @@ static int __xipram do_write_oneword(str + + ret = -EIO; + } ++ ++ enable_xip: + xip_enable(map, chip, adr); + op_done: + chip->state = FL_READY; +@@ -1563,7 +1565,6 @@ static int cfi_amdstd_write_buffers(stru + return 0; + } + +- + /* + * Handle devices with one erase region, that only implement + * the chip erase command. +@@ -1627,8 +1628,8 @@ static int __xipram do_erase_chip(struct + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, map_word_ff(map))) ++ goto op_done; + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", +@@ -1648,6 +1649,7 @@ static int __xipram do_erase_chip(struct + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + xip_enable(map, chip, adr); + put_chip(map, chip, adr); +@@ -1715,9 +1717,9 @@ static int __xipram do_erase_oneblock(st + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) { ++ if (chip_good(map, adr, map_word_ff(map))) { + xip_enable(map, chip, adr); +- break; ++ goto op_done; + } + + if (time_after(jiffies, timeo)) { +@@ -1739,6 +1741,7 @@ static int __xipram do_erase_oneblock(st + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); diff --git a/target/linux/ar71xx/patches-3.2/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.2/404-mtd-wrt160nl-trx-parser.patch new file mode 100644 index 0000000000..fdee9f53b7 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/404-mtd-wrt160nl-trx-parser.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -148,6 +148,12 @@ config MTD_AR7_PARTS + ---help--- + TI AR7 partitioning support + ++config MTD_WRT160NL_PARTS ++ tristate "Linksys WRT160NL partitioning support" ++ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL ++ ---help--- ++ Linksys WRT160NL partitioning support ++ + config MTD_MYLOADER_PARTS + tristate "MyLoader partition parsing" + depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79 +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o ++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + + # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ar71xx/patches-3.2/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.2/405-mtd-tp-link-partition-parser.patch new file mode 100644 index 0000000000..2c3efc1b1a --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/405-mtd-tp-link-partition-parser.patch @@ -0,0 +1,34 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -150,7 +150,7 @@ config MTD_AR7_PARTS + + config MTD_WRT160NL_PARTS + tristate "Linksys WRT160NL partitioning support" +- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL ++ depends on ATH79_MACH_WRT160NL + ---help--- + Linksys WRT160NL partitioning support + +@@ -170,6 +170,12 @@ config MTD_MYLOADER_PARTS + You will still need the parsing functions to be called by the driver + for your particular device. It won't happen automatically. + ++config MTD_TPLINK_PARTS ++ tristate "TP-Link AR7XXX/AR9XXX partitioning support" ++ depends on ATH79 ++ ---help--- ++ TBD. ++ + comment "User Modules And Translation Layers" + + config MTD_CHAR +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o ++obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/ar71xx/patches-3.2/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.2/406-mtd-m25p80-allow-to-specify-max-read-size.patch new file mode 100644 index 0000000000..86d9535802 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/406-mtd-m25p80-allow-to-specify-max-read-size.patch @@ -0,0 +1,112 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -100,6 +100,7 @@ struct m25p { + u16 addr_width; + u8 erase_opcode; + u8 *command; ++ size_t max_read_len; + }; + + static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) +@@ -352,6 +353,7 @@ static int m25p80_read(struct mtd_info * + struct m25p *flash = mtd_to_m25p(mtd); + struct spi_transfer t[2]; + struct spi_message m; ++ loff_t ofs; + + pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), + __func__, (u32)from, len); +@@ -374,8 +376,6 @@ static int m25p80_read(struct mtd_info * + t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE; + spi_message_add_tail(&t[0], &m); + +- t[1].rx_buf = buf; +- t[1].len = len; + spi_message_add_tail(&t[1], &m); + + /* Byte count starts at zero. */ +@@ -383,13 +383,6 @@ static int m25p80_read(struct mtd_info * + + mutex_lock(&flash->lock); + +- /* Wait till previous write/erase is done. */ +- if (wait_till_ready(flash)) { +- /* REVISIT status return?? */ +- mutex_unlock(&flash->lock); +- return 1; +- } +- + /* FIXME switch to OPCODE_FAST_READ. It's required for higher + * clocks; and at this writing, every chip this driver handles + * supports that opcode. +@@ -397,11 +390,44 @@ static int m25p80_read(struct mtd_info * + + /* Set up the write data buffer. */ + flash->command[0] = OPCODE_READ; +- m25p_addr2cmd(flash, from, flash->command); + +- spi_sync(flash->spi, &m); ++ ofs = 0; ++ while (len) { ++ size_t readlen; ++ size_t done; ++ int ret; ++ ++ ret = wait_till_ready(flash); ++ if (ret) { ++ mutex_unlock(&flash->lock); ++ return 1; ++ } ++ ++ if (flash->max_read_len > 0 && ++ flash->max_read_len < len) ++ readlen = flash->max_read_len; ++ else ++ readlen = len; ++ ++ t[1].rx_buf = buf + ofs; ++ t[1].len = readlen; ++ ++ m25p_addr2cmd(flash, from + ofs, flash->command); ++ ++ spi_sync(flash->spi, &m); + +- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE; ++ done = m.actual_length - m25p_cmdsz(flash) - ++ FAST_READ_DUMMY_BYTE; ++ if (done != readlen) { ++ mutex_unlock(&flash->lock); ++ return 1; ++ } ++ ++ ofs += done; ++ len -= done; ++ } ++ ++ *retlen = ofs; + + mutex_unlock(&flash->lock); + +@@ -924,6 +950,12 @@ static int __devinit m25p_probe(struct s + flash->mtd.erase = m25p80_erase; + flash->mtd.read = m25p80_read; + ++ if (data && data->max_read_len) { ++ flash->max_read_len = data->max_read_len; ++ dev_warn(&spi->dev, "max_read_len set to %d bytes\n", ++ flash->max_read_len); ++ } ++ + /* sst flash chips use AAI word program */ + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) + flash->mtd.write = sst_write; +--- a/include/linux/spi/flash.h ++++ b/include/linux/spi/flash.h +@@ -25,6 +25,7 @@ struct flash_platform_data { + + char *type; + ++ size_t max_read_len; + /* we'll likely add more ... use JEDEC IDs, etc */ + }; + diff --git a/target/linux/ar71xx/patches-3.2/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.2/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch new file mode 100644 index 0000000000..950bb239fc --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -1016,7 +1016,9 @@ static int __devinit m25p_probe(struct s + /* partitions should match sector boundaries; and it may be good to + * use readonly partitions for writeprotected sectors (BP2..BP0). + */ +- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, ++ return mtd_device_parse_register(&flash->mtd, ++ data ? data->part_probes : NULL, ++ &ppdata, + data ? data->parts : NULL, + data ? data->nr_parts : 0); + } +--- a/include/linux/spi/flash.h ++++ b/include/linux/spi/flash.h +@@ -24,6 +24,7 @@ struct flash_platform_data { + unsigned int nr_parts; + + char *type; ++ const char **part_probes; + + size_t max_read_len; + /* we'll likely add more ... use JEDEC IDs, etc */ diff --git a/target/linux/ar71xx/patches-3.2/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.2/408-mtd-redboot_partition_scan.patch new file mode 100644 index 0000000000..52b91751f3 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/408-mtd-redboot_partition_scan.patch @@ -0,0 +1,54 @@ +--- a/drivers/mtd/redboot.c ++++ b/drivers/mtd/redboot.c +@@ -79,31 +79,32 @@ static int parse_redboot_partitions(stru + static char nullstring[] = "unallocated"; + #endif + ++ buf = vmalloc(master->erasesize); ++ if (!buf) ++ return -ENOMEM; ++ ++ restart: + if ( directory < 0 ) { + offset = master->size + directory * master->erasesize; +- while (master->block_isbad && ++ while (master->block_isbad && + master->block_isbad(master, offset)) { + if (!offset) { + nogood: + printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++ vfree(buf); + return -EIO; + } + offset -= master->erasesize; + } + } else { + offset = directory * master->erasesize; +- while (master->block_isbad && ++ while (master->block_isbad && + master->block_isbad(master, offset)) { + offset += master->erasesize; + if (offset == master->size) + goto nogood; + } + } +- buf = vmalloc(master->erasesize); +- +- if (!buf) +- return -ENOMEM; +- + printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + master->name, offset); + +@@ -175,6 +176,11 @@ static int parse_redboot_partitions(stru + } + if (i == numslots) { + /* Didn't find it */ ++ if (offset + master->erasesize < master->size) { ++ /* not at the end of the flash yet, maybe next block :) */ ++ directory++; ++ goto restart; ++ } + printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", + master->name); + ret = 0; diff --git a/target/linux/ar71xx/patches-3.2/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.2/409-mtd-rb4xx_nand_driver.patch new file mode 100644 index 0000000000..154cb8889a --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/409-mtd-rb4xx_nand_driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -537,4 +537,8 @@ config MTD_NAND_FSMC + Enables support for NAND Flash chips on the ST Microelectronics + Flexible Static Memory Controller (FSMC) + ++config MTD_NAND_RB4XX ++ tristate "NAND flash driver for RouterBoard 4xx series" ++ depends on MTD_NAND && ATH79_MACH_RB4XX ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 + obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_ALAUDA) += alauda.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-3.2/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.2/410-mtd-rb750-nand-driver.patch new file mode 100644 index 0000000000..bf637370a1 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/410-mtd-rb750-nand-driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -541,4 +541,8 @@ config MTD_NAND_RB4XX + tristate "NAND flash driver for RouterBoard 4xx series" + depends on MTD_NAND && ATH79_MACH_RB4XX + ++config MTD_NAND_RB750 ++ tristate "NAND flash driver for the RouterBoard 750" ++ depends on MTD_NAND && ATH79_MACH_RB750 ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o ++obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o + obj-$(CONFIG_MTD_ALAUDA) += alauda.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-3.2/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.2/411-mtd-cfi_cmdset_0002-force-word-write.patch new file mode 100644 index 0000000000..e4e879b5b9 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/411-mtd-cfi_cmdset_0002-force-word-write.patch @@ -0,0 +1,61 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -39,7 +39,7 @@ + #include <linux/mtd/xip.h> + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_WORD_RETRIES 3 + +@@ -50,7 +50,9 @@ + + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#if !FORCE_WORD_WRITE + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#endif + static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); + static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); + static void cfi_amdstd_sync (struct mtd_info *); +@@ -183,6 +185,7 @@ static void fixup_amd_bootblock(struct m + } + #endif + ++#if !FORCE_WORD_WRITE + static void fixup_use_write_buffers(struct mtd_info *mtd) + { + struct map_info *map = mtd->priv; +@@ -192,6 +195,7 @@ static void fixup_use_write_buffers(stru + mtd->write = cfi_amdstd_write_buffers; + } + } ++#endif /* !FORCE_WORD_WRITE */ + + /* Atmel chips don't use the same PRI format as AMD chips */ + static void fixup_convert_atmel_pri(struct mtd_info *mtd) +@@ -1374,6 +1378,7 @@ static int cfi_amdstd_write_words(struct + /* + * FIXME: interleaved mode not tested, and probably not supported! + */ ++#if !FORCE_WORD_WRITE + static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +@@ -1485,7 +1490,6 @@ static int __xipram do_write_buffer(stru + return ret; + } + +- + static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1564,6 +1568,7 @@ static int cfi_amdstd_write_buffers(stru + + return 0; + } ++#endif /* !FORCE_WORD_WRITE */ + + /* + * Handle devices with one erase region, that only implement diff --git a/target/linux/ar71xx/patches-3.2/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.2/420-net-ar71xx_mac_driver.patch new file mode 100644 index 0000000000..b65b3289a7 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/420-net-ar71xx_mac_driver.patch @@ -0,0 +1,19 @@ +--- a/drivers/net/ethernet/atheros/Kconfig ++++ b/drivers/net/ethernet/atheros/Kconfig +@@ -67,4 +67,6 @@ config ATL1C + To compile this driver as a module, choose M here. The module + will be called atl1c. + ++source drivers/net/ethernet/atheros/ag71xx/Kconfig ++ + endif # NET_VENDOR_ATHEROS +--- a/drivers/net/ethernet/atheros/Makefile ++++ b/drivers/net/ethernet/atheros/Makefile +@@ -2,6 +2,7 @@ + # Makefile for the Atheros network device drivers. + # + ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_ATL1) += atlx/ + obj-$(CONFIG_ATL2) += atlx/ + obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ar71xx/patches-3.2/421-net-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-3.2/421-net-ksz8041_phy_driver.patch new file mode 100644 index 0000000000..78d7e0e3eb --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/421-net-ksz8041_phy_driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -124,6 +124,11 @@ config RTL8306_PHY + tristate "Driver for Realtek RTL8306S switches" + select SWCONFIG + ++config MICREL_PHY ++ tristate "Drivers for Micrel/Kendin PHYs" ++ ---help--- ++ Currently has a driver for the KSZ8041 ++ + config FIXED_PHY + bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -25,6 +25,7 @@ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o + obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o + obj-$(CONFIG_RTL8367_PHY) += rtl8367.o + obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o ++obj-$(CONFIG_MICREL_PHY) += micrel.o + obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o + obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/ar71xx/patches-3.2/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.2/422-dsa-trailer-tag-validation-fix.patch new file mode 100644 index 0000000000..3e3902bac0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/422-dsa-trailer-tag-validation-fix.patch @@ -0,0 +1,11 @@ +--- a/net/dsa/tag_trailer.c ++++ b/net/dsa/tag_trailer.c +@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s + + trailer = skb_tail_pointer(skb) - 4; + if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || +- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) ++ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) + goto out_drop; + + source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-3.2/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.2/423-dsa-add-88e6063-driver.patch new file mode 100644 index 0000000000..1a11a69c6f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/423-dsa-add-88e6063-driver.patch @@ -0,0 +1,26 @@ +--- a/net/dsa/Kconfig ++++ b/net/dsa/Kconfig +@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060 + This enables support for the Marvell 88E6060 ethernet switch + chip. + ++config NET_DSA_MV88E6063 ++ bool "Marvell 88E6063 ethernet switch chip support" ++ select NET_DSA_TAG_TRAILER ++ ---help--- ++ This enables support for the Marvell 88E6063 ethernet switch ++ chip ++ + config NET_DSA_MV88E6XXX_NEED_PPU + bool + default n +--- a/net/dsa/Makefile ++++ b/net/dsa/Makefile +@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag + # switch drivers + obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o + obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o ++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o + obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o + obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o + diff --git a/target/linux/ar71xx/patches-3.2/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.2/430-drivers-link-spi-before-mtd.patch new file mode 100644 index 0000000000..e081087f2f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/430-drivers-link-spi-before-mtd.patch @@ -0,0 +1,12 @@ +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -51,8 +51,8 @@ obj-$(CONFIG_IDE) += ide/ + obj-$(CONFIG_SCSI) += scsi/ + obj-$(CONFIG_ATA) += ata/ + obj-$(CONFIG_TARGET_CORE) += target/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-y += net/ + obj-$(CONFIG_ATM) += atm/ + obj-$(CONFIG_FUSION) += message/ diff --git a/target/linux/ar71xx/patches-3.2/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.2/431-spi-add-various-flags.patch new file mode 100644 index 0000000000..b51f68f3ca --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/431-spi-add-various-flags.patch @@ -0,0 +1,19 @@ +--- a/include/linux/spi/spi.h ++++ b/include/linux/spi/spi.h +@@ -441,6 +441,8 @@ struct spi_transfer { + dma_addr_t rx_dma; + + unsigned cs_change:1; ++ unsigned verify:1; ++ unsigned fast_write:1; + u8 bits_per_word; + u16 delay_usecs; + u32 speed_hz; +@@ -482,6 +484,7 @@ struct spi_message { + struct spi_device *spi; + + unsigned is_dma_mapped:1; ++ unsigned fast_read:1; + + /* REVISIT: we might want a flag affecting the behavior of the + * last transfer ... allowing things like "read 16 bit length L" diff --git a/target/linux/ar71xx/patches-3.2/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.2/432-spi-rb4xx-spi-driver.patch new file mode 100644 index 0000000000..85157a0414 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/432-spi-rb4xx-spi-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -289,6 +289,12 @@ config SPI_PXA2XX + config SPI_PXA2XX_PCI + def_bool SPI_PXA2XX && X86_32 && PCI + ++config SPI_RB4XX ++ tristate "Mikrotik RB4XX SPI master" ++ depends on SPI_MASTER && ATH79_MACH_RB4XX ++ help ++ SPI controller driver for the Mikrotik RB4xx series boards. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C2410 && EXPERIMENTAL +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o + obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o ++obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o + obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o + spi-s3c24xx-hw-y := spi-s3c24xx.o + spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o diff --git a/target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch new file mode 100644 index 0000000000..c40607270a --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -441,6 +441,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on ATH79_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx. + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o + obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o + spi-s3c24xx-hw-y := spi-s3c24xx.o + spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o diff --git a/target/linux/ar71xx/patches-3.2/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.2/434-spi-ap83_spi_controller.patch new file mode 100644 index 0000000000..b4dbcd4705 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/434-spi-ap83_spi_controller.patch @@ -0,0 +1,27 @@ +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o + # SPI master controller drivers (bus) + obj-$(CONFIG_SPI_ALTERA) += spi-altera.o + obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o ++obj-$(CONFIG_SPI_AP83) += spi-ap83.o + obj-$(CONFIG_SPI_ATH79) += spi-ath79.o + obj-$(CONFIG_SPI_AU1550) += spi-au1550.o + obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -59,6 +59,14 @@ config SPI_ALTERA + help + This is the driver for the Altera SPI Controller. + ++config SPI_AP83 ++ tristate "Atheros AP83 specific SPI Controller" ++ depends on SPI_MASTER && ATH79_MACH_AP83 ++ select SPI_BITBANG ++ help ++ This is a specific SPI controller driver for the Atheros AP83 ++ reference board. ++ + config SPI_ATH79 + tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" + depends on ATH79 && GENERIC_GPIO diff --git a/target/linux/ar71xx/patches-3.2/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.2/435-spi-vsc7385_driver.patch new file mode 100644 index 0000000000..6504a05ce6 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/435-spi-vsc7385_driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -456,6 +456,11 @@ config SPI_RB4XX_CPLD + SPI driver for the Xilinx CPLD chip present on the + MikroTik RB4xx boards. + ++config SPI_VSC7385 ++ tristate "Vitesse VSC7385 ethernet switch driver" ++ help ++ SPI driver for the Vitesse VSC7385 ethernet switch. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -61,5 +61,5 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp. + obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o + obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o + obj-$(CONFIG_SPI_TXX9) += spi-txx9.o ++obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o + obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o +- diff --git a/target/linux/ar71xx/patches-3.2/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.2/440-leds-wndr3700-usb-led-driver.patch new file mode 100644 index 0000000000..5a0151ef52 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/440-leds-wndr3700-usb-led-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -395,6 +395,13 @@ config LEDS_TRIGGERS + These triggers allow kernel events to drive the LEDs and can + be configured via sysfs. If unsure, say Y. + ++config LEDS_WNDR3700_USB ++ tristate "NETGEAR WNDR3700 USB LED driver" ++ depends on LEDS_CLASS && ATH79_MACH_WNDR3700 ++ help ++ This option enables support for the USB LED found on the ++ NETGEAR WNDR3700 board. ++ + comment "LED Triggers" + + config LEDS_TRIGGER_TIMER +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903 + obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o + obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o + obj-$(CONFIG_LEDS_PWM) += leds-pwm.o ++obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o + obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o + obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o + obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-3.2/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.2/441-leds-rb750-led-driver.patch new file mode 100644 index 0000000000..ac3ded6ee9 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/441-leds-rb750-led-driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -402,6 +402,10 @@ config LEDS_WNDR3700_USB + This option enables support for the USB LED found on the + NETGEAR WNDR3700 board. + ++config LEDS_RB750 ++ tristate "LED driver for the Mikrotik RouterBOARD 750" ++ depends on LEDS_CLASS && ATH79_MACH_RB750 ++ + comment "LED Triggers" + + config LEDS_TRIGGER_TIMER +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 + obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o + obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o + obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o ++obj-$(CONFIG_LEDS_RB750) += leds-rb750.o + obj-$(CONFIG_LEDS_NS2) += leds-ns2.o + obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o + obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/target/linux/ar71xx/patches-3.2/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.2/450-gpio-nxp-74hc153-gpio-chip-driver.patch new file mode 100644 index 0000000000..1e67abfdd5 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/450-gpio-nxp-74hc153-gpio-chip-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -489,4 +489,13 @@ config GPIO_TPS65910 + help + Select this option to enable GPIO driver for the TPS65910 + chip family. ++ ++comment "Other GPIO expanders" ++ ++config GPIO_NXP_74HC153 ++ tristate "NXP 74HC153 Dual 4-input multiplexer" ++ help ++ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This ++ provides a GPIO interface supporting input mode only. ++ + endif +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2 + obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o + obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o + obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o ++obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o + obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o + obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o + obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o diff --git a/target/linux/ar71xx/patches-3.2/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.2/500-MIPS-fw-myloader.patch new file mode 100644 index 0000000000..446d75fd0f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/500-MIPS-fw-myloader.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -174,6 +174,7 @@ endif + # + libs-$(CONFIG_ARC) += arch/mips/fw/arc/ + libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ ++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ + libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ + libs-y += arch/mips/fw/lib/ + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -953,6 +953,9 @@ config MIPS_NILE4 + config MIPS_DISABLE_OBSOLETE_IDE + bool + ++config MYLOADER ++ bool ++ + config SYNC_R4K + bool + diff --git a/target/linux/ar71xx/patches-3.2/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.2/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch new file mode 100644 index 0000000000..8ac50ea2a4 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch @@ -0,0 +1,81 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -15,6 +15,7 @@ + #include <linux/init.h> + #include <linux/delay.h> + #include <linux/irq.h> ++#include <linux/etherdevice.h> + #include <linux/platform_device.h> + #include <linux/ath9k_platform.h> + +@@ -22,6 +23,7 @@ + #include <asm/mach-ath79/ar71xx_regs.h> + #include "dev-wmac.h" + ++static u8 ath79_wmac_mac[ETH_ALEN]; + static struct ath9k_platform_data ath79_wmac_data; + + static struct resource ath79_wmac_resources[] = { +@@ -116,7 +118,7 @@ static void ar934x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = true; + } + +-void __init ath79_register_wmac(u8 *cal_data) ++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) + ar913x_wmac_setup(); +@@ -131,5 +133,10 @@ void __init ath79_register_wmac(u8 *cal_ + memcpy(ath79_wmac_data.eeprom_data, cal_data, + sizeof(ath79_wmac_data.eeprom_data)); + ++ if (mac_addr) { ++ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac)); ++ ath79_wmac_data.macaddr = ath79_wmac_mac; ++ } ++ + platform_device_register(&ath79_wmac_device); + } +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -12,6 +12,6 @@ + #ifndef _ATH79_DEV_WMAC_H + #define _ATH79_DEV_WMAC_H + +-void ath79_register_wmac(u8 *cal_data); ++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); + + #endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -98,7 +98,7 @@ static void __init ap81_setup(void) + ap81_gpio_keys); + ath79_register_spi(&ap81_spi_data, ap81_spi_info, + ARRAY_SIZE(ap81_spi_info)); +- ath79_register_wmac(cal_data); ++ ath79_register_wmac(cal_data, NULL); + ath79_register_usb(); + } + +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -153,7 +153,7 @@ static void __init db120_setup(void) + ath79_register_spi(&db120_spi_data, db120_spi_info, + ARRAY_SIZE(db120_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); ++ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); + db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); + } + +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -91,7 +91,7 @@ static void __init ap121_setup(void) + ath79_register_spi(&ap121_spi_data, ap121_spi_info, + ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(cal_data); ++ ath79_register_wmac(cal_data, NULL); + } + + MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", diff --git a/target/linux/ar71xx/patches-3.2/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.2/502-MIPS-ath79-export-ath79_gpio_base.patch new file mode 100644 index 0000000000..9b16c424fc --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/502-MIPS-ath79-export-ath79_gpio_base.patch @@ -0,0 +1,23 @@ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -25,7 +25,9 @@ + #include <asm/mach-ath79/ath79.h> + #include "common.h" + +-static void __iomem *ath79_gpio_base; ++void __iomem *ath79_gpio_base; ++EXPORT_SYMBOL_GPL(ath79_gpio_base); ++ + static unsigned long ath79_gpio_count; + static DEFINE_SPINLOCK(ath79_gpio_lock); + +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -99,6 +99,7 @@ static inline int soc_is_ar934x(void) + } + + extern void __iomem *ath79_ddr_base; ++extern void __iomem *ath79_gpio_base; + extern void __iomem *ath79_pll_base; + extern void __iomem *ath79_reset_base; + diff --git a/target/linux/ar71xx/patches-3.2/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.2/503-MIPS-ath79-add-flash-acquire-release.patch new file mode 100644 index 0000000000..2c9cad1289 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/503-MIPS-ath79-add-flash-acquire-release.patch @@ -0,0 +1,37 @@ +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -22,6 +22,7 @@ + #include "common.h" + + static DEFINE_SPINLOCK(ath79_device_reset_lock); ++static DEFINE_MUTEX(ath79_flash_mutex); + + u32 ath79_cpu_freq; + EXPORT_SYMBOL_GPL(ath79_cpu_freq); +@@ -107,3 +108,16 @@ void ath79_device_reset_clear(u32 mask) + spin_unlock_irqrestore(&ath79_device_reset_lock, flags); + } + EXPORT_SYMBOL_GPL(ath79_device_reset_clear); ++ ++void ath79_flash_acquire(void) ++{ ++ mutex_lock(&ath79_flash_mutex); ++} ++EXPORT_SYMBOL_GPL(ath79_flash_acquire); ++ ++void ath79_flash_release(void) ++{ ++ mutex_unlock(&ath79_flash_mutex); ++} ++EXPORT_SYMBOL_GPL(ath79_flash_release); ++ +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -126,4 +126,7 @@ static inline u32 ath79_reset_rr(unsigne + void ath79_device_reset_set(u32 mask); + void ath79_device_reset_clear(u32 mask); + ++void ath79_flash_acquire(void); ++void ath79_flash_release(void); ++ + #endif /* __ASM_MACH_ATH79_H */ diff --git a/target/linux/ar71xx/patches-3.2/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.2/504-MIPS-ath79-add-ath79_device_reset_get.patch new file mode 100644 index 0000000000..5179a53de4 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/504-MIPS-ath79-add-ath79_device_reset_get.patch @@ -0,0 +1,45 @@ +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -125,6 +125,7 @@ static inline u32 ath79_reset_rr(unsigne + + void ath79_device_reset_set(u32 mask); + void ath79_device_reset_clear(u32 mask); ++u32 ath79_device_reset_get(u32 mask); + + void ath79_flash_acquire(void); + void ath79_flash_release(void); +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -109,6 +109,32 @@ void ath79_device_reset_clear(u32 mask) + } + EXPORT_SYMBOL_GPL(ath79_device_reset_clear); + ++u32 ath79_device_reset_get(u32 mask) ++{ ++ unsigned long flags; ++ u32 reg; ++ u32 ret; ++ ++ if (soc_is_ar71xx()) ++ reg = AR71XX_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar724x()) ++ reg = AR724X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar913x()) ++ reg = AR913X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar933x()) ++ reg = AR933X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar934x()) ++ reg = AR934X_RESET_REG_RESET_MODULE; ++ else ++ BUG(); ++ ++ spin_lock_irqsave(&ath79_device_reset_lock, flags); ++ ret = ath79_reset_rr(reg); ++ spin_unlock_irqrestore(&ath79_device_reset_lock, flags); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(ath79_device_reset_get); ++ + void ath79_flash_acquire(void) + { + mutex_lock(&ath79_flash_mutex); diff --git a/target/linux/ar71xx/patches-3.2/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.2/505-MIPS-ath79-add-ath79_gpio_function_select.patch new file mode 100644 index 0000000000..9a23f7d5e4 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/505-MIPS-ath79-add-ath79_gpio_function_select.patch @@ -0,0 +1,47 @@ +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg + void ath79_gpio_function_enable(u32 mask); + void ath79_gpio_function_disable(u32 mask); + void ath79_gpio_function_setup(u32 set, u32 clear); ++void ath79_gpio_output_select(unsigned gpio, u8 val); + void ath79_gpio_init(void); + + #endif /* __ATH79_COMMON_H */ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -184,6 +184,34 @@ void ath79_gpio_function_setup(u32 set, + spin_unlock_irqrestore(&ath79_gpio_lock, flags); + } + ++void __init ath79_gpio_output_select(unsigned gpio, u8 val) ++{ ++ void __iomem *base = ath79_gpio_base; ++ unsigned long flags; ++ unsigned int reg; ++ u32 t, s; ++ ++ BUG_ON(!soc_is_ar934x()); ++ ++ if (gpio >= AR934X_GPIO_COUNT) ++ return; ++ ++ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); ++ s = 8 * (gpio % 4); ++ ++ spin_lock_irqsave(&ath79_gpio_lock, flags); ++ ++ t = __raw_readl(base + reg); ++ t &= ~(0xff << s); ++ t |= val << s; ++ __raw_writel(t, base + reg); ++ ++ /* flush write */ ++ (void) __raw_readl(base + reg); ++ ++ spin_unlock_irqrestore(&ath79_gpio_lock, flags); ++} ++ + void __init ath79_gpio_init(void) + { + int err; diff --git a/target/linux/ar71xx/patches-3.2/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.2/506-MIPS-ath79-prom-parse-redboot-args.patch new file mode 100644 index 0000000000..aab959b900 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/506-MIPS-ath79-prom-parse-redboot-args.patch @@ -0,0 +1,86 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -19,6 +19,8 @@ + + #include "common.h" + ++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata; ++ + static inline int is_valid_ram_addr(void *addr) + { + if (((u32) addr > KSEG0) && +@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void + return 0; + } + ++static void __init ath79_prom_append_cmdline(const char *name, ++ const char *value) ++{ ++ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf), ++ " %s=%s", name, value); ++ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); ++} ++ ++static const char * __init ath79_prom_find_env(char **envp, const char *name) ++{ ++ const char *ret = NULL; ++ int len; ++ char **p; ++ ++ if (!is_valid_ram_addr(envp)) ++ return NULL; ++ ++ len = strlen(name); ++ for (p = envp; is_valid_ram_addr(*p); p++) { ++ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { ++ ret = *p + len + 1; ++ break; ++ } ++ ++ /* RedBoot env comes in pointer pairs - key, value */ ++ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) ++ if (is_valid_ram_addr(*(++p))) { ++ ret = *p; ++ break; ++ } ++ } ++ ++ return ret; ++} ++ + static __init void ath79_prom_init_cmdline(int argc, char **argv) + { + int i; +@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli + + void __init prom_init(void) + { ++ const char *env; ++ char **envp; ++ + ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); ++ ++ envp = (char **)fw_arg2; ++ if (!strstr(arcs_cmdline, "ethaddr=")) { ++ env = ath79_prom_find_env(envp, "ethaddr"); ++ if (env) ++ ath79_prom_append_cmdline("ethaddr", env); ++ } ++ ++ if (!strstr(arcs_cmdline, "board=")) { ++ env = ath79_prom_find_env(envp, "board"); ++ if (env) { ++ /* Workaround for buggy bootloaders */ ++ if (strcmp(env, "RouterStation") == 0 || ++ strcmp(env, "Ubiquiti AR71xx-based board") == 0) ++ env = "UBNT-RS"; ++ ++ if (strcmp(env, "RouterStation PRO") == 0) ++ env = "UBNT-RSPRO"; ++ ++ ath79_prom_append_cmdline("board", env); ++ } ++ } + } + + void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-3.2/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.2/507-MIPS-ath79-prom-add-myloader-support.patch new file mode 100644 index 0000000000..137bf6b84e --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/507-MIPS-ath79-prom-add-myloader-support.patch @@ -0,0 +1,55 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -16,6 +16,7 @@ + + #include <asm/bootinfo.h> + #include <asm/addrspace.h> ++#include <asm/fw/myloader/myloader.h> + + #include "common.h" + +@@ -69,6 +70,34 @@ static const char * __init ath79_prom_fi + return ret; + } + ++static int __init ath79_prom_init_myloader(void) ++{ ++ struct myloader_info *mylo; ++ char mac_buf[32]; ++ unsigned char *mac; ++ ++ mylo = myloader_get_info(); ++ if (!mylo) ++ return 0; ++ ++ switch (mylo->did) { ++ case DEVID_COMPEX_WP543: ++ ath79_prom_append_cmdline("board", "WP543"); ++ break; ++ default: ++ pr_warn("prom: unknown device id: %x\n", mylo->did); ++ return 0; ++ } ++ ++ mac = mylo->macs[0]; ++ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ ++ ath79_prom_append_cmdline("ethaddr", mac_buf); ++ ++ return 1; ++} ++ + static __init void ath79_prom_init_cmdline(int argc, char **argv) + { + int i; +@@ -88,6 +117,9 @@ void __init prom_init(void) + const char *env; + char **envp; + ++ if (ath79_prom_init_myloader()) ++ return; ++ + ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); + + envp = (char **)fw_arg2; diff --git a/target/linux/ar71xx/patches-3.2/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.2/508-MIPS-ath79-prom-image-command-line-hack.patch new file mode 100644 index 0000000000..062e513a35 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/508-MIPS-ath79-prom-image-command-line-hack.patch @@ -0,0 +1,57 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi + return ret; + } + ++#ifdef CONFIG_IMAGE_CMDLINE_HACK ++extern char __image_cmdline[]; ++ ++static int __init ath79_use_image_cmdline(void) ++{ ++ char *p = __image_cmdline; ++ int replace = 0; ++ ++ if (*p == '-') { ++ replace = 1; ++ p++; ++ } ++ ++ if (*p == '\0') ++ return 0; ++ ++ if (replace) { ++ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); ++ } else { ++ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); ++ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); ++ } ++ ++ return 1; ++} ++#else ++static inline int ath79_use_image_cmdline(void) { return 0; } ++#endif ++ + static int __init ath79_prom_init_myloader(void) + { + struct myloader_info *mylo; +@@ -95,6 +124,8 @@ static int __init ath79_prom_init_myload + + ath79_prom_append_cmdline("ethaddr", mac_buf); + ++ ath79_use_image_cmdline(); ++ + return 1; + } + +@@ -102,6 +133,9 @@ static __init void ath79_prom_init_cmdli + { + int i; + ++ if (ath79_use_image_cmdline()) ++ return; ++ + if (!is_valid_ram_addr(argv)) + return; + diff --git a/target/linux/ar71xx/patches-3.2/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.2/509-MIPS-ath79-process-board-kernel-option.patch new file mode 100644 index 0000000000..8b7e2d4889 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/509-MIPS-ath79-process-board-kernel-option.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -215,6 +215,8 @@ void __init plat_time_init(void) + mips_hpt_frequency = clk_get_rate(clk) / 2; + } + ++__setup("board=", mips_machtype_setup); ++ + static int __init ath79_setup(void) + { + ath79_gpio_init(); diff --git a/target/linux/ar71xx/patches-3.2/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.2/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch new file mode 100644 index 0000000000..2d2235e292 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch @@ -0,0 +1,14 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -24,7 +24,10 @@ + #include "dev-wmac.h" + + static u8 ath79_wmac_mac[ETH_ALEN]; +-static struct ath9k_platform_data ath79_wmac_data; ++ ++static struct ath9k_platform_data ath79_wmac_data = { ++ .led_pin = -1, ++}; + + static struct resource ath79_wmac_resources[] = { + { diff --git a/target/linux/ar71xx/patches-3.2/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.2/601-MIPS-ath79-add-more-register-defines.patch new file mode 100644 index 0000000000..4d948bb29f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/601-MIPS-ath79-add-more-register-defines.patch @@ -0,0 +1,231 @@ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -20,7 +20,13 @@ + #include <linux/io.h> + #include <linux/bitops.h> + ++#define AR71XX_PCI_MEM_BASE 0x10000000 ++#define AR71XX_PCI_MEM_SIZE 0x08000000 + #define AR71XX_APB_BASE 0x18000000 ++#define AR71XX_GE0_BASE 0x19000000 ++#define AR71XX_GE0_SIZE 0x10000 ++#define AR71XX_GE1_BASE 0x1a000000 ++#define AR71XX_GE1_SIZE 0x10000 + #define AR71XX_EHCI_BASE 0x1b000000 + #define AR71XX_EHCI_SIZE 0x1000 + #define AR71XX_OHCI_BASE 0x1c000000 +@@ -40,6 +46,8 @@ + #define AR71XX_PLL_SIZE 0x100 + #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) + #define AR71XX_RESET_SIZE 0x100 ++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR71XX_MII_SIZE 0x100 + + #define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) + #define AR7240_USB_CTRL_SIZE 0x100 +@@ -56,11 +64,15 @@ + + #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) + #define AR933X_UART_SIZE 0x14 ++#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR933X_GMAC_SIZE 0x04 + #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR933X_WMAC_SIZE 0x20000 + #define AR933X_EHCI_BASE 0x1b000000 + #define AR933X_EHCI_SIZE 0x1000 + ++#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR934X_GMAC_SIZE 0x14 + #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR934X_WMAC_SIZE 0x20000 + #define AR934X_EHCI_BASE 0x1b000000 +@@ -120,6 +132,9 @@ + #define AR71XX_AHB_DIV_SHIFT 20 + #define AR71XX_AHB_DIV_MASK 0x7 + ++#define AR71XX_ETH0_PLL_SHIFT 17 ++#define AR71XX_ETH1_PLL_SHIFT 19 ++ + #define AR724X_PLL_REG_CPU_CONFIG 0x00 + #define AR724X_PLL_REG_PCIE_CONFIG 0x18 + +@@ -132,6 +147,8 @@ + #define AR724X_DDR_DIV_SHIFT 22 + #define AR724X_DDR_DIV_MASK 0x3 + ++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c ++ + #define AR913X_PLL_REG_CPU_CONFIG 0x00 + #define AR913X_PLL_REG_ETH_CONFIG 0x04 + #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 +@@ -144,6 +161,9 @@ + #define AR913X_AHB_DIV_SHIFT 19 + #define AR913X_AHB_DIV_MASK 0x1 + ++#define AR913X_ETH0_PLL_SHIFT 20 ++#define AR913X_ETH1_PLL_SHIFT 22 ++ + #define AR933X_PLL_CPU_CONFIG_REG 0x00 + #define AR933X_PLL_CLOCK_CTRL_REG 0x08 + +@@ -285,7 +305,11 @@ + #define AR913X_RESET_USB_HOST BIT(5) + #define AR913X_RESET_USB_PHY BIT(4) + ++#define AR933X_RESET_GE1_MDIO BIT(23) ++#define AR933X_RESET_GE0_MDIO BIT(22) ++#define AR933X_RESET_GE1_MAC BIT(13) + #define AR933X_RESET_WMAC BIT(11) ++#define AR933X_RESET_GE0_MAC BIT(9) + #define AR933X_RESET_USB_HOST BIT(5) + #define AR933X_RESET_USB_PHY BIT(4) + #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) +@@ -323,6 +347,8 @@ + #define AR934X_RESET_MBOX BIT(1) + #define AR934X_RESET_I2S BIT(0) + ++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) ++#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) +@@ -427,6 +453,14 @@ + #define AR71XX_GPIO_REG_INT_ENABLE 0x24 + #define AR71XX_GPIO_REG_FUNC 0x28 + ++#define AR934X_GPIO_REG_OUT_FUNC0 0x2c ++#define AR934X_GPIO_REG_OUT_FUNC1 0x30 ++#define AR934X_GPIO_REG_OUT_FUNC2 0x34 ++#define AR934X_GPIO_REG_OUT_FUNC3 0x38 ++#define AR934X_GPIO_REG_OUT_FUNC4 0x3c ++#define AR934X_GPIO_REG_OUT_FUNC5 0x40 ++#define AR934X_GPIO_REG_FUNC 0x6c ++ + #define AR71XX_GPIO_COUNT 16 + #define AR7240_GPIO_COUNT 18 + #define AR7241_GPIO_COUNT 20 +@@ -434,4 +468,124 @@ + #define AR933X_GPIO_COUNT 30 + #define AR934X_GPIO_COUNT 23 + ++#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) ++#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) ++#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) ++#define AR71XX_GPIO_FUNC_UART_EN BIT(8) ++#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) ++#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) ++ ++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) ++#define AR724X_GPIO_FUNC_SPI_EN BIT(18) ++#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) ++#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) ++#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) ++#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) ++#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) ++#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) ++#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) ++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) ++#define AR724X_GPIO_FUNC_UART_EN BIT(1) ++#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) ++ ++#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) ++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) ++#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) ++#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) ++#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) ++#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) ++#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) ++#define AR913X_GPIO_FUNC_UART_EN BIT(8) ++#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) ++ ++#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) ++#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) ++#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) ++#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) ++#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) ++#define AR933X_GPIO_FUNC_SPI_EN BIT(18) ++#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) ++#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) ++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) ++#define AR933X_GPIO_FUNC_UART_EN BIT(1) ++#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) ++ ++#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) ++#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) ++#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) ++ ++#define AR934X_GPIO_OUT_GPIO 0x00 ++ ++/* ++ * MII_CTRL block ++ */ ++#define AR71XX_MII_REG_MII0_CTRL 0x00 ++#define AR71XX_MII_REG_MII1_CTRL 0x04 ++ ++#define AR71XX_MII_CTRL_IF_MASK 3 ++#define AR71XX_MII_CTRL_SPEED_SHIFT 4 ++#define AR71XX_MII_CTRL_SPEED_MASK 3 ++#define AR71XX_MII_CTRL_SPEED_10 0 ++#define AR71XX_MII_CTRL_SPEED_100 1 ++#define AR71XX_MII_CTRL_SPEED_1000 2 ++ ++#define AR71XX_MII0_CTRL_IF_GMII 0 ++#define AR71XX_MII0_CTRL_IF_MII 1 ++#define AR71XX_MII0_CTRL_IF_RGMII 2 ++#define AR71XX_MII0_CTRL_IF_RMII 3 ++ ++#define AR71XX_MII1_CTRL_IF_RGMII 0 ++#define AR71XX_MII1_CTRL_IF_RMII 1 ++ ++/* ++ * AR933X GMAC interface ++ */ ++#define AR933X_GMAC_REG_ETH_CFG 0x00 ++ ++#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) ++#define AR933X_ETH_CFG_MII_GE0 BIT(1) ++#define AR933X_ETH_CFG_GMII_GE0 BIT(2) ++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) ++#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) ++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) ++#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) ++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) ++#define AR933X_ETH_CFG_RMII_GE0 BIT(9) ++#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 ++#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) ++ ++/* ++ * AR934X GMAC Interface ++ */ ++#define AR934X_GMAC_REG_ETH_CFG 0x00 ++ ++#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) ++#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) ++#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) ++#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) ++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) ++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) ++#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) ++#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) ++#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) ++#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) ++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) ++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) ++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) ++ + #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-3.2/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.2/602-MIPS-ath79-add-openwrt-stuff.patch new file mode 100644 index 0000000000..a29d79164b --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/602-MIPS-ath79-add-openwrt-stuff.patch @@ -0,0 +1,60 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -88,6 +88,20 @@ config SOC_AR934X + select PCI_AR724X if PCI + def_bool n + ++config ATH79_DEV_M25P80 ++ select ATH79_DEV_SPI ++ def_bool n ++ ++config ATH79_DEV_AP9X_PCI ++ select ATH79_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config ATH79_DEV_DSA ++ def_bool n ++ ++config ATH79_DEV_ETH ++ def_bool n ++ + config PCI_AR724X + def_bool n + +@@ -107,4 +121,10 @@ config ATH79_DEV_WMAC + depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X) + def_bool n + ++config ATH79_NVRAM ++ def_bool n ++ ++config ATH79_PCI_ATH9K_FIXUP ++ def_bool n ++ + endif +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -17,13 +17,23 @@ obj-$(CONFIG_PCI) += pci.o + # Devices + # + obj-y += dev-common.o ++obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o ++obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o ++obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o + obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o + obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o ++obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o + obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o + obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o + obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o + + # ++# Miscellaneous objects ++# ++obj-$(CONFIG_ATH79_NVRAM) += nvram.o ++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o ++ ++# + # Machines + # + obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o diff --git a/target/linux/ar71xx/patches-3.2/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.2/603-MIPS-ath79-ap121-fixes.patch new file mode 100644 index 0000000000..b8583d5a3b --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/603-MIPS-ath79-ap121-fixes.patch @@ -0,0 +1,240 @@ +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -1,19 +1,23 @@ + /* + * Atheros AP121 board support + * +- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> + +-#include "machtypes.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" ++#include "dev-m25p80.h" + #include "dev-spi.h" + #include "dev-usb.h" + #include "dev-wmac.h" ++#include "machtypes.h" + + #define AP121_GPIO_LED_WLAN 0 + #define AP121_GPIO_LED_USB 1 +@@ -24,7 +28,82 @@ + #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ + #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) + +-#define AP121_CAL_DATA_ADDR 0x1fff1000 ++#define AP121_MAC0_OFFSET 0x0000 ++#define AP121_MAC1_OFFSET 0x0006 ++#define AP121_CALDATA_OFFSET 0x1000 ++#define AP121_WMAC_MAC_OFFSET 0x1002 ++ ++#define AP121_MINI_GPIO_LED_WLAN 0 ++#define AP121_MINI_GPIO_BTN_JUMPSTART 12 ++#define AP121_MINI_GPIO_BTN_RESET 11 ++ ++static struct mtd_partition ap121_parts[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "rootfs", ++ .offset = 0x010000, ++ .size = 0x130000, ++ }, ++ { ++ .name = "uImage", ++ .offset = 0x140000, ++ .size = 0x0a0000, ++ }, ++ { ++ .name = "NVRAM", ++ .offset = 0x1e0000, ++ .size = 0x010000, ++ }, ++ { ++ .name = "ART", ++ .offset = 0x1f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++}; ++ ++static struct mtd_partition ap121_mini_parts[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x2b0000, ++ }, ++ { ++ .name = "uImage", ++ .offset = 0x300000, ++ .size = 0x0e0000, ++ }, ++ { ++ .name = "NVRAM", ++ .offset = 0x3e0000, ++ .size = 0x010000, ++ }, ++ { ++ .name = "ART", ++ .offset = 0x3f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++}; ++ ++static struct flash_platform_data ap121_flash_data; + + static struct gpio_led ap121_leds_gpio[] __initdata = { + { +@@ -58,41 +137,84 @@ static struct gpio_keys_button ap121_gpi + } + }; + +-static struct ath79_spi_controller_data ap121_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, ++static struct gpio_led ap121_mini_leds_gpio[] __initdata = { ++ { ++ .name = "ap121:green:wlan", ++ .gpio = AP121_MINI_GPIO_LED_WLAN, ++ .active_low = 0, ++ }, + }; + +-static struct spi_board_info ap121_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l1606e", +- .controller_data = &ap121_spi0_data, ++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { ++ { ++ .desc = "jumpstart button", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, ++ .active_low = 1, ++ }, ++ { ++ .desc = "reset button", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_RESET, ++ .active_low = 1, + } + }; + +-static struct ath79_spi_platform_data ap121_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; ++static void __init ap121_common_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(&ap121_flash_data); ++ ath79_register_wmac(art + AP121_CALDATA_OFFSET, ++ art + AP121_WMAC_MAC_OFFSET); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ /* LAN ports */ ++ ath79_register_eth(1); ++ ++ /* WAN port */ ++ ath79_register_eth(0); ++} + + static void __init ap121_setup(void) + { +- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); ++ ap121_flash_data.parts = ap121_parts; ++ ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_parts); ++ ++ ap121_common_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), + ap121_leds_gpio); + ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap121_gpio_keys), + ap121_gpio_keys); +- +- ath79_register_spi(&ap121_spi_data, ap121_spi_info, +- ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(cal_data, NULL); + } + + MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", + ap121_setup); ++ ++static void __init ap121_mini_setup(void) ++{ ++ ap121_flash_data.parts = ap121_mini_parts; ++ ap121_flash_data.nr_parts = ARRAY_SIZE(ap121_mini_parts); ++ ++ ap121_common_setup(); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), ++ ap121_mini_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap121_mini_gpio_keys), ++ ap121_mini_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", ++ ap121_mini_setup); +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi + config ATH79_MACH_AP121 + bool "Atheros AP121 reference board" + select SOC_AR933X ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -17,6 +17,7 @@ + enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, + ATH79_MACH_AP121, /* Atheros AP121 reference board */ ++ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ diff --git a/target/linux/ar71xx/patches-3.2/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.2/604-MIPS-ath79-ap81-fixes.patch new file mode 100644 index 0000000000..cc0d598464 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/604-MIPS-ath79-ap81-fixes.patch @@ -0,0 +1,128 @@ +--- a/arch/mips/ath79/mach-ap81.c ++++ b/arch/mips/ath79/mach-ap81.c +@@ -9,12 +9,16 @@ + * by the Free Software Foundation. + */ + +-#include "machtypes.h" +-#include "dev-wmac.h" ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++ ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" +-#include "dev-spi.h" ++#include "dev-m25p80.h" + #include "dev-usb.h" ++#include "dev-wmac.h" ++#include "machtypes.h" + + #define AP81_GPIO_LED_STATUS 1 + #define AP81_GPIO_LED_AOSS 3 +@@ -29,6 +33,37 @@ + + #define AP81_CAL_DATA_ADDR 0x1fff1000 + ++static struct mtd_partition ap81_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x500000, ++ }, { ++ .name = "uImage", ++ .offset = 0x550000, ++ .size = 0x100000, ++ }, { ++ .name = "ART", ++ .offset = 0x650000, ++ .size = 0x1b0000, ++ .mask_flags = MTD_WRITEABLE, ++ } ++}; ++ ++static struct flash_platform_data ap81_flash_data = { ++ .parts = ap81_partitions, ++ .nr_parts = ARRAY_SIZE(ap81_partitions), ++}; ++ + static struct gpio_led ap81_leds_gpio[] __initdata = { + { + .name = "ap81:green:status", +@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio + } + }; + +-static struct ath79_spi_controller_data ap81_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, +-}; +- +-static struct spi_board_info ap81_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "m25p64", +- .controller_data = &ap81_spi0_data, +- } +-}; +- +-static struct ath79_spi_platform_data ap81_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- + static void __init ap81_setup(void) + { + u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); +@@ -96,10 +111,24 @@ static void __init ap81_setup(void) + ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap81_gpio_keys), + ap81_gpio_keys); +- ath79_register_spi(&ap81_spi_data, ap81_spi_info, +- ARRAY_SIZE(ap81_spi_info)); ++ ath79_register_m25p80(&ap81_flash_data); + ath79_register_wmac(cal_data, NULL); + ath79_register_usb(); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0); ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ath79_eth0_data.speed = SPEED_100; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++ ath79_eth0_data.has_ar8216 = 1; ++ ++ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ath79_eth1_data.phy_mask = 0x10; ++ ++ ath79_register_eth(0); ++ ath79_register_eth(1); + } + + MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -18,9 +18,10 @@ config ATH79_MACH_AP121 + config ATH79_MACH_AP81 + bool "Atheros AP81 reference board" + select SOC_AR913X ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help diff --git a/target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch new file mode 100644 index 0000000000..07b23dae09 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/605-MIPS-ath79-db120-fixes.patch @@ -0,0 +1,220 @@ +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -37,17 +37,26 @@ + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> + #include <linux/pci.h> ++#include <linux/platform_device.h> + #include <linux/ath9k_platform.h> + +-#include "machtypes.h" ++#include <asm/mach-ath79/ar71xx_regs.h> ++ ++#include "common.h" ++#include "dev-ap9x-pci.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" ++#include "dev-m25p80.h" + #include "dev-spi.h" + #include "dev-usb.h" + #include "dev-wmac.h" +-#include "pci.h" ++#include "machtypes.h" + ++#define DB120_GPIO_LED_USB 11 + #define DB120_GPIO_LED_WLAN_5G 12 + #define DB120_GPIO_LED_WLAN_2G 13 + #define DB120_GPIO_LED_STATUS 14 +@@ -58,8 +67,50 @@ + #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ + #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) + +-#define DB120_WMAC_CALDATA_OFFSET 0x1000 +-#define DB120_PCIE_CALDATA_OFFSET 0x5000 ++#define DB120_MAC0_OFFSET 0 ++#define DB120_MAC1_OFFSET 6 ++#define DB120_WMAC_CALDATA_OFFSET 0x1000 ++#define DB120_PCIE_CALDATA_OFFSET 0x5000 ++ ++static struct mtd_partition db120_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ }, ++ { ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x630000, ++ }, ++ { ++ .name = "uImage", ++ .offset = 0x680000, ++ .size = 0x160000, ++ }, ++ { ++ .name = "NVRAM", ++ .offset = 0x7E0000, ++ .size = 0x010000, ++ }, ++ { ++ .name = "ART", ++ .offset = 0x7F0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ } ++}; ++ ++static struct flash_platform_data db120_flash_data = { ++ .parts = db120_partitions, ++ .nr_parts = ARRAY_SIZE(db120_partitions), ++}; + + static struct gpio_led db120_leds_gpio[] __initdata = { + { +@@ -82,6 +133,11 @@ static struct gpio_led db120_leds_gpio[] + .gpio = DB120_GPIO_LED_WLAN_2G, + .active_low = 1, + }, ++ { ++ .name = "db120:green:usb", ++ .gpio = DB120_GPIO_LED_USB, ++ .active_low = 1, ++ } + }; + + static struct gpio_keys_button db120_gpio_keys[] __initdata = { +@@ -95,66 +151,65 @@ static struct gpio_keys_button db120_gpi + }, + }; + +-static struct ath79_spi_controller_data db120_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, +-}; +- +-static struct spi_board_info db120_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "s25sl064a", +- .controller_data = &db120_spi0_data, +- } +-}; +- +-static struct ath79_spi_platform_data db120_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data db120_ath9k_data; +- +-static int db120_pci_plat_dev_init(struct pci_dev *dev) ++static void __init db120_gmac_setup(void) + { +- switch (PCI_SLOT(dev->devfn)) { +- case 0: +- dev->dev.platform_data = &db120_ath9k_data; +- break; +- } ++ void __iomem *base; ++ u32 t; + +- return 0; +-} ++ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); + +-static void __init db120_pci_init(u8 *eeprom) +-{ +- memcpy(db120_ath9k_data.eeprom_data, eeprom, +- sizeof(db120_ath9k_data.eeprom_data)); ++ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); ++ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | ++ AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); ++ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); + +- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); +- ath79_register_pci(); ++ iounmap(base); + } +-#else +-static inline void db120_pci_init(void) {} +-#endif /* CONFIG_PCI */ + + static void __init db120_setup(void) + { + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + ++ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); ++ ath79_register_m25p80(&db120_flash_data); ++ + ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), + db120_leds_gpio); + ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, + ARRAY_SIZE(db120_gpio_keys), + db120_gpio_keys); +- ath79_register_spi(&db120_spi_data, db120_spi_info, +- ARRAY_SIZE(db120_spi_info)); + ath79_register_usb(); + ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); +- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); ++ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); ++ ++ db120_gmac_setup(); ++ ++ ath79_register_mdio(0, 0x0); ++ ath79_register_mdio(1, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); ++#if 0 ++ /* GMAC0 is connected to an AR8327 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.speed = SPEED_1000; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++#else ++ /* GMAC0 is connected to PHY4 of the internal switch */ ++ ath79_switch_data.phy4_mii_en = 1; ++ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ath79_eth0_data.phy_mask = BIT(4); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; ++#endif ++ ath79_register_eth(0); ++ ++ /* GMAC1 is connected to the internal switch */ ++ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ++ ath79_register_eth(1); + } + + MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -31,9 +31,11 @@ config ATH79_MACH_AP81 + config ATH79_MACH_DB120 + bool "Atheros DB120 reference board" + select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help diff --git a/target/linux/ar71xx/patches-3.2/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.2/606-MIPS-ath79-pb44-fixes.patch new file mode 100644 index 0000000000..1f3550bc6f --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/606-MIPS-ath79-pb44-fixes.patch @@ -0,0 +1,153 @@ +--- a/arch/mips/ath79/mach-pb44.c ++++ b/arch/mips/ath79/mach-pb44.c +@@ -8,23 +8,48 @@ + * by the Free Software Foundation. + */ + ++#include <linux/delay.h> + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/i2c.h> + #include <linux/i2c-gpio.h> + #include <linux/i2c/pcf857x.h> ++#include <linux/i2c/pcf857x.h> ++#include <linux/spi/flash.h> ++#include <linux/spi/vsc7385.h> + +-#include "machtypes.h" ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ath79.h> ++ ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" + #include "dev-usb.h" ++#include "machtypes.h" + #include "pci.h" + + #define PB44_GPIO_I2C_SCL 0 + #define PB44_GPIO_I2C_SDA 1 + ++#define PB44_PCF8757_VSC7395_CS 0 ++#define PB44_PCF8757_STEREO_CS 1 ++#define PB44_PCF8757_SLIC_CS0 2 ++#define PB44_PCF8757_SLIC_TEST 3 ++#define PB44_PCF8757_SLIC_INT0 4 ++#define PB44_PCF8757_SLIC_INT1 5 ++#define PB44_PCF8757_SW_RESET 6 ++#define PB44_PCF8757_SW_JUMP 8 ++#define PB44_PCF8757_LED_JUMP1 9 ++#define PB44_PCF8757_LED_JUMP2 10 ++#define PB44_PCF8757_TP24 11 ++#define PB44_PCF8757_TP25 12 ++#define PB44_PCF8757_TP26 13 ++#define PB44_PCF8757_TP27 14 ++#define PB44_PCF8757_TP28 15 ++ + #define PB44_GPIO_EXP_BASE 16 ++#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) + #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) + #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) + #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) +@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data + .cs_line = 0, + }; + ++static struct ath79_spi_controller_data pb44_spi1_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_GPIO, ++ .cs_line = PB44_GPIO_VSC7395_CS, ++}; ++ ++static void pb44_vsc7395_reset(void) ++{ ++ ath79_device_reset_set(AR71XX_RESET_GE1_PHY); ++ udelay(10); ++ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); ++ mdelay(50); ++} ++ ++static struct vsc7385_platform_data pb44_vsc7395_data = { ++ .reset = pb44_vsc7395_reset, ++ .ucode_name = "vsc7395_ucode_pb44.bin", ++ .mac_cfg = { ++ .tx_ipg = 6, ++ .bit2 = 1, ++ .clk_sel = 0, ++ }, ++}; ++ ++static const char *pb44_part_probes[] = { ++ "RedBoot", ++ NULL, ++}; ++ ++static struct flash_platform_data pb44_flash_data = { ++ .part_probes = pb44_part_probes, ++}; ++ + static struct spi_board_info pb44_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p64", ++ .platform_data = &pb44_flash_data, + .controller_data = &pb44_spi0_data, + }, ++ { ++ .bus_num = 0, ++ .chip_select = 1, ++ .max_speed_hz = 25000000, ++ .modalias = "spi-vsc7385", ++ .platform_data = &pb44_vsc7395_data, ++ .controller_data = &pb44_spi1_data, ++ } + }; + + static struct ath79_spi_platform_data pb44_spi_data = { + .bus_num = 0, +- .num_chipselect = 1, ++ .num_chipselect = 2, + }; + ++#define PB44_WAN_PHYMASK BIT(0) ++#define PB44_LAN_PHYMASK 0 ++#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) ++ + static void __init pb44_init(void) + { + i2c_register_board_info(0, pb44_i2c_board_info, +@@ -122,6 +192,22 @@ static void __init pb44_init(void) + ARRAY_SIZE(pb44_spi_info)); + ath79_register_usb(); + ath79_register_pci(); ++ ++ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK; ++ ++ ath79_register_eth(0); ++ ++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ath79_eth1_pll_data.pll_1000 = 0x110000; ++ ++ ath79_register_eth(1); + } + + MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -45,6 +45,7 @@ config ATH79_MACH_DB120 + config ATH79_MACH_PB44 + bool "Atheros PB44 reference board" + select SOC_AR71XX ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI diff --git a/target/linux/ar71xx/patches-3.2/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.2/607-MIPS-ath79-ubnt-xm-fixes.patch new file mode 100644 index 0000000000..cc393a8e76 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/607-MIPS-ath79-ubnt-xm-fixes.patch @@ -0,0 +1,109 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -57,9 +57,10 @@ config ATH79_MACH_PB44 + config ATH79_MACH_UBNT_XM + bool "Ubiquiti Networks XM (rev 1.0) board" + select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -16,10 +16,11 @@ + + #include <asm/mach-ath79/irq.h> + +-#include "machtypes.h" ++#include "dev-ap9x-pci.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" +-#include "dev-spi.h" ++#include "dev-m25p80.h" ++#include "machtypes.h" + #include "pci.h" + + #define UBNT_XM_GPIO_LED_L1 0 +@@ -32,7 +33,7 @@ + #define UBNT_XM_KEYS_POLL_INTERVAL 20 + #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) + +-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) ++#define UBNT_XM_EEPROM_ADDR 0x1fff1000 + + static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { + { +@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g + } + }; + +-static struct ath79_spi_controller_data ubnt_xm_spi0_data = { +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, +-}; +- +-static struct spi_board_info ubnt_xm_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- .controller_data = &ubnt_xm_spi0_data, +- } +-}; +- +-static struct ath79_spi_platform_data ubnt_xm_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +-}; +- +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ubnt_xm_eeprom_data; +- +-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) +-{ +- switch (PCI_SLOT(dev->devfn)) { +- case 0: +- dev->dev.platform_data = &ubnt_xm_eeprom_data; +- break; +- } +- +- return 0; +-} +- +-static void __init ubnt_xm_pci_init(void) +-{ +- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, +- sizeof(ubnt_xm_eeprom_data.eeprom_data)); +- +- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); +- ath79_register_pci(); +-} +-#else +-static inline void ubnt_xm_pci_init(void) {} +-#endif /* CONFIG_PCI */ +- + static void __init ubnt_xm_init(void) + { ++ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); ++ + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), + ubnt_xm_leds_gpio); + +@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void) + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + +- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, +- ARRAY_SIZE(ubnt_xm_spi_info)); +- +- ubnt_xm_pci_init(); ++ ath79_register_m25p80(NULL); ++ ap91_pci_init(eeprom, NULL); + } + + MIPS_MACHINE(ATH79_MACH_UBNT_XM, diff --git a/target/linux/ar71xx/patches-3.2/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.2/608-MIPS-ath79-ubnt-xm-add-more-boards.patch new file mode 100644 index 0000000000..982860f561 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -0,0 +1,187 @@ +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -13,15 +13,17 @@ + #include <linux/init.h> + #include <linux/pci.h> + #include <linux/ath9k_platform.h> ++#include <linux/etherdevice.h> + + #include <asm/mach-ath79/irq.h> + + #include "dev-ap9x-pci.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-m25p80.h" ++#include "dev-usb.h" + #include "machtypes.h" +-#include "pci.h" + + #define UBNT_XM_GPIO_LED_L1 0 + #define UBNT_XM_GPIO_LED_L2 1 +@@ -37,19 +39,19 @@ + + static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { + { +- .name = "ubnt-xm:red:link1", ++ .name = "ubnt:red:link1", + .gpio = UBNT_XM_GPIO_LED_L1, + .active_low = 0, + }, { +- .name = "ubnt-xm:orange:link2", ++ .name = "ubnt:orange:link2", + .gpio = UBNT_XM_GPIO_LED_L2, + .active_low = 0, + }, { +- .name = "ubnt-xm:green:link3", ++ .name = "ubnt:green:link3", + .gpio = UBNT_XM_GPIO_LED_L3, + .active_low = 0, + }, { +- .name = "ubnt-xm:green:link4", ++ .name = "ubnt:green:link4", + .gpio = UBNT_XM_GPIO_LED_L4, + .active_low = 0, + }, +@@ -66,9 +68,13 @@ static struct gpio_keys_button ubnt_xm_g + } + }; + ++#define UBNT_M_WAN_PHYMASK BIT(4) ++ + static void __init ubnt_xm_init(void) + { + u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), + ubnt_xm_leds_gpio); +@@ -79,9 +85,99 @@ static void __init ubnt_xm_init(void) + + ath79_register_m25p80(NULL); + ap91_pci_init(eeprom, NULL); ++ ++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); ++ ath79_register_eth(0); + } + + MIPS_MACHINE(ATH79_MACH_UBNT_XM, + "UBNT-XM", + "Ubiquiti Networks XM (rev 1.0) board", + ubnt_xm_init); ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", ++ ubnt_xm_init); ++ ++static void __init ubnt_rocket_m_setup(void) ++{ ++ ubnt_xm_init(); ++ ath79_register_usb(); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", ++ ubnt_rocket_m_setup); ++ ++static void __init ubnt_nano_m_setup(void) ++{ ++ ubnt_xm_init(); ++ ath79_register_eth(1); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", ++ ubnt_nano_m_setup); ++ ++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:green:globe", ++ .gpio = 0, ++ .active_low = 1, ++ } ++}; ++ ++static void __init ubnt_airrouter_setup(void) ++{ ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ath79_register_m25p80(NULL); ++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); ++ ++ ath79_register_eth(1); ++ ath79_register_eth(0); ++ ath79_register_usb(); ++ ++ ap91_pci_init(ee, NULL); ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), ++ ubnt_airrouter_leds_gpio); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", ++ ubnt_airrouter_setup); ++ ++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:orange:dome", ++ .gpio = 1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:dome", ++ .gpio = 0, ++ .active_low = 0, ++ } ++}; ++ ++static void __init ubnt_unifi_setup(void) ++{ ++ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ++ ath79_register_eth(0); ++ ++ ap91_pci_init(ee, NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), ++ ubnt_unifi_leds_gpio); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", ++ ubnt_unifi_setup); +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -58,9 +58,11 @@ config ATH79_MACH_UBNT_XM + bool "Ubiquiti Networks XM (rev 1.0) board" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -21,6 +21,11 @@ enum ath79_mach_type { + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ ++ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ ++ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ ++ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ ++ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ + ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ + }; + diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch new file mode 100644 index 0000000000..e65bd51358 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch @@ -0,0 +1,642 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -16,17 +16,77 @@ + + enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, ++ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ ++ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ ++ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */ + ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ ++ ATH79_MACH_AP83, /* Atheros AP83 */ ++ ATH79_MACH_AP96, /* Atheros AP96 */ ++ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ ++ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ++ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ ++ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ ++ ATH79_MACH_JA76PF, /* jjPlus JA76PF */ ++ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ ++ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ ++ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ ++ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ ++ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ ++ ATH79_MACH_OM2P, /* OpenMesh OM2P */ ++ ATH79_MACH_PB42, /* Atheros PB42 */ ++ ATH79_MACH_PB92, /* Atheros PB92 */ ++ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ ++ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ ++ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ ++ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ ++ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ ++ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ ++ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ ++ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ ++ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ ++ ATH79_MACH_RW2458N, /* Redwave RW2458N */ ++ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ ++ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ ++ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ ++ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ ++ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ ++ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ ++ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ ++ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ ++ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ ++ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ ++ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ ++ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ ++ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ ++ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ + ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ + ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ ++ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ ++ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ + ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ + ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ ++ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ ++ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ + ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ + ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ ++ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ ++ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ ++ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ ++ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ ++ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ ++ ATH79_MACH_WP543, /* Compex WP543 */ ++ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ ++ ATH79_MACH_WRT400N, /* Linksys WRT400N */ ++ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ ++ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ ++ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ ++ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ ++ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + }; + + #endif /* _ATH79_MACHTYPE_H */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -2,6 +2,42 @@ if ATH79 + + menu "Atheros AR71XX/AR724X/AR913X machine selection" + ++config ATH79_MACH_ALFA_AP96 ++ bool "ALFA Network AP96 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_SPI ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_HORNET_UB ++ bool "ALFA Network Hornet-UB board support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_ALFA_NX ++ bool "ALFA Network N2/N5 board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_ALL0258N ++ bool "Allnet ALL0258N support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ + config ATH79_MACH_AP121 + bool "Atheros AP121 reference board" + select SOC_AR933X +@@ -28,6 +64,36 @@ config ATH79_MACH_AP81 + Say 'Y' here if you want your kernel to support the + Atheros AP81 reference board. + ++config ATH79_MACH_AP83 ++ bool "Atheros AP83 board support" ++ select SOC_AR913X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_AP96 ++ bool "Atheros AP96 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_AP121 ++ bool "Atheros AP121 reference board" ++ select SOC_AR933X ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ help ++ Say 'Y' here if you want your kernel to support the ++ Atheros AP121 reference board. ++ + config ATH79_MACH_DB120 + bool "Atheros DB120 reference board" + select SOC_AR934X +@@ -42,6 +108,13 @@ config ATH79_MACH_DB120 + Say 'Y' here if you want your kernel to support the + Atheros DB120 reference board. + ++config ATH79_MACH_PB42 ++ bool "Atheros PB42 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_M25P80 ++ + config ATH79_MACH_PB44 + bool "Atheros PB44 reference board" + select SOC_AR71XX +@@ -54,6 +127,349 @@ config ATH79_MACH_PB44 + Say 'Y' here if you want your kernel to support the + Atheros PB44 reference board. + ++config ATH79_MACH_PB92 ++ bool "Atheros PB92 board support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_PB9X_PCI if PCI ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_AW_NR580 ++ bool "AzureWave AW-NR580 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_WHR_HP_G300N ++ bool "Buffalo WHR-HP-G300N board support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_WZR_HP_AG300H ++ bool "Buffalo WZR-HP-AG300H board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WZR_HP_G300NH ++ bool "Buffalo WZR-HP-G300NH board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ select RTL8366_SMI ++ ++config ATH79_MACH_WZR_HP_G300NH2 ++ bool "Buffalo WZR-HP-G300NH2 board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WZR_HP_G450H ++ bool "Buffalo WZR-HP-G450H board support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WP543 ++ bool "Compex WP543/WPJ543 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select MYLOADER ++ ++config ATH79_MACH_DIR_600_A1 ++ bool "D-Link DIR-600 rev. A1 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_NVRAM ++ ++config ATH79_MACH_DIR_615_C1 ++ bool "D-Link DIR-615 rev. C1 support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_DIR_825_B1 ++ bool "D-Link DIR-825 rev. B1 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_JA76PF ++ bool "jjPlus JA76PF board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_JWAP003 ++ bool "jjPlus JWAP003 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WRT160NL ++ bool "Linksys WRT160NL board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_WRT400N ++ bool "Linksys WRT400N board support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ ++config ATH79_MACH_RB4XX ++ bool "MikroTik RouterBOARD 4xx series support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_RB750 ++ bool "MikroTik RouterBOARD 750 support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ ++config ATH79_MACH_WNDR3700 ++ bool "NETGEAR WNDR3700 board support" ++ select SOC_AR71XX ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_WNR2000 ++ bool "NETGEAR WNR2000 board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_OM2P ++ bool "OpenMesh OM2P board support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_MZK_W04NU ++ bool "Planex MZK-W04NU board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_MZK_W300NH ++ bool "Planex MZK-W300NH board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_RW2458N ++ bool "Redwave RW2458N board support" ++ select SOC_AR724X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_EAP7660D ++ bool "Senao EAP7660D support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TL_MR3020 ++ bool "TP-LINK TL-MR3020 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_MR3X20 ++ bool "TP-LINK TL-MR3220/3420 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_TL_WA901ND ++ bool "TP-LINK TL-WA901ND support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TL_WA901ND_V2 ++ bool "TP-LINK TL-WA901ND v2 support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR703N ++ bool "TP-LINK TL-WR703N support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR741ND ++ bool "TP-LINK TL-WR741ND support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TL_WR741ND_V4 ++ bool "TP-LINK TL-WR741ND v4 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR841N_V1 ++ bool "TP-LINK TL-WR841N v1 support" ++ select SOC_AR71XX ++ select ATH79_DEV_DSA ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_TL_WR941ND ++ bool "TP-LINK TL-WR941ND support" ++ select SOC_AR913X ++ select ATH79_DEV_DSA ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR1043ND ++ bool "TP-LINK TL-WR1043ND support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ ++config ATH79_MACH_TL_WR2543N ++ bool "TP-LINK TL-WR2543N/ND support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ ++config ATH79_MACH_TEW_632BRP ++ bool "TRENDnet TEW-632BRP support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_NVRAM ++ ++config ATH79_MACH_UBNT ++ bool "Ubiquiti AR71xx based boards support" ++ select SOC_AR71XX ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ + config ATH79_MACH_UBNT_XM + bool "Ubiquiti Networks XM (rev 1.0) board" + select SOC_AR724X +@@ -67,6 +483,24 @@ config ATH79_MACH_UBNT_XM + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. + ++config ATH79_MACH_ZCN_1523H ++ bool "Zcomax ZCN-1523H support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ ++config ATH79_MACH_NBG460N ++ bool "Zyxel NBG460N/550N/550NH board support" ++ select SOC_AR913X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ + endmenu + + config SOC_AR71XX +@@ -96,10 +530,6 @@ config SOC_AR934X + select PCI_AR724X if PCI + def_bool n + +-config ATH79_DEV_M25P80 +- select ATH79_DEV_SPI +- def_bool n +- + config ATH79_DEV_AP9X_PCI + select ATH79_PCI_ATH9K_FIXUP + def_bool n +@@ -110,7 +540,14 @@ config ATH79_DEV_DSA + config ATH79_DEV_ETH + def_bool n + +-config PCI_AR724X ++config ATH79_DEV_M25P80 ++ select ATH79_DEV_SPI ++ def_bool n ++ ++config ATH79_DEV_DSA ++ def_bool n ++ ++config ATH79_DEV_ETH + def_bool n + + config ATH79_DEV_GPIO_BUTTONS +@@ -135,4 +572,7 @@ config ATH79_NVRAM + config ATH79_PCI_ATH9K_FIXUP + def_bool n + ++config PCI_AR724X ++ def_bool n ++ + endif +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -36,8 +36,53 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p + # + # Machines + # ++obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o ++obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o ++obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o + obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o + obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o ++obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o ++obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o ++obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o ++obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o ++obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o ++obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o ++obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o ++obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o ++obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o ++obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o ++obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o ++obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o ++obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o ++obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o + obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o ++obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o ++obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o ++obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o ++obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o ++obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o ++obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o ++obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o ++obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o ++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o ++obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o ++obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o ++obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o + obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o ++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o ++obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o ++obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o ++obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o ++obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o ++obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o ++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o diff --git a/target/linux/ar71xx/patches-3.2/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.2/901-mdio_bitbang_ignore_ta_value.patch new file mode 100644 index 0000000000..39584aabfa --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/901-mdio_bitbang_ignore_ta_value.patch @@ -0,0 +1,20 @@ +--- a/drivers/net/phy/mdio-bitbang.c ++++ b/drivers/net/phy/mdio-bitbang.c +@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b + + ctrl->ops->set_mdio_dir(ctrl, 0); + +- /* check the turnaround bit: the PHY should be driving it to zero */ +- if (mdiobb_get_bit(ctrl) != 0) { +- /* PHY didn't drive TA low -- flush any bits it +- * may be trying to send. +- */ +- for (i = 0; i < 32; i++) +- mdiobb_get_bit(ctrl); +- +- return 0xffff; +- } ++ mdiobb_get_bit(ctrl); + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); diff --git a/target/linux/ar71xx/patches-3.2/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.2/902-unaligned_access_hacks.patch new file mode 100644 index 0000000000..921cf194d6 --- /dev/null +++ b/target/linux/ar71xx/patches-3.2/902-unaligned_access_hacks.patch @@ -0,0 +1,117 @@ +--- a/arch/mips/include/asm/checksum.h ++++ b/arch/mips/include/asm/checksum.h +@@ -12,6 +12,7 @@ + #define _ASM_CHECKSUM_H + + #include <linux/in6.h> ++#include <linux/unaligned/packed_struct.h> + + #include <asm/uaccess.h> + +@@ -104,26 +105,30 @@ static inline __sum16 ip_fast_csum(const + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; ++ unsigned int w; + +- csum = word[0]; +- csum += word[1]; +- carry = (csum < word[1]); ++ csum = __get_unaligned_cpu32(word++); ++ ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[2]; +- carry = (csum < word[2]); ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[3]; +- carry = (csum < word[3]); ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- word += 4; + do { +- csum += *word; +- carry = (csum < *word); ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; +- word++; + } while (word != stop); + + return csum_fold(csum); +--- a/include/linux/ip.h ++++ b/include/linux/ip.h +@@ -102,7 +102,7 @@ struct iphdr { + __be32 saddr; + __be32 daddr; + /*The options start here. */ +-}; ++} __packed; + + #ifdef __KERNEL__ + #include <linux/skbuff.h> +--- a/include/linux/ipv6.h ++++ b/include/linux/ipv6.h +@@ -126,7 +126,7 @@ struct ipv6hdr { + + struct in6_addr saddr; + struct in6_addr daddr; +-}; ++} __packed; + + #ifdef __KERNEL__ + /* +--- a/include/linux/tcp.h ++++ b/include/linux/tcp.h +@@ -54,7 +54,7 @@ struct tcphdr { + __be16 window; + __sum16 check; + __be16 urg_ptr; +-}; ++} __packed; + + /* + * The union cast uses a gcc extension to avoid aliasing problems +--- a/include/linux/udp.h ++++ b/include/linux/udp.h +@@ -24,7 +24,7 @@ struct udphdr { + __be16 dest; + __be16 len; + __sum16 check; +-}; ++} __packed; + + /* UDP socket options */ + #define UDP_CORK 1 /* Never send partially complete segments */ +--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c ++++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +@@ -14,6 +14,7 @@ + #include <linux/skbuff.h> + #include <linux/icmp.h> + #include <linux/sysctl.h> ++#include <linux/unaligned/packed_struct.h> + #include <net/route.h> + #include <net/ip.h> + +@@ -44,8 +45,8 @@ static bool ipv4_pkt_to_tuple(const stru + if (ap == NULL) + return false; + +- tuple->src.u3.ip = ap[0]; +- tuple->dst.u3.ip = ap[1]; ++ tuple->src.u3.ip = __get_unaligned_cpu32(ap++); ++ tuple->dst.u3.ip = __get_unaligned_cpu32(ap); + + return true; + } |