[boot] move boot related packages to their own folder

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33781 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 273 deletions

diff --git a/package/uboot-xburst/files/cpu/mips/mmc_protocol.h b/package/uboot-xburst/files/cpu/mips/mmc_protocol.h
deleted file mode 100644
index ebd59125b6..0000000000
--- a/package/uboot-xburst/files/cpu/mips/mmc_protocol.h
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
-**********************************************************************
-*
-*                            uC/MMC
-*
-*             (c) Copyright 2005 - 2007, Ingenic Semiconductor, Inc
-*                      All rights reserved.
-*
-***********************************************************************
-
-----------------------------------------------------------------------
-File        : mmc_protocol.h
-Purpose     : MMC protocol definitions.
-
-----------------------------------------------------------------------
-Version-Date-----Author-Explanation
-----------------------------------------------------------------------
-1.00.00 20060831 WeiJianli     First release
-
-----------------------------------------------------------------------
-Known problems or limitations with current version
-----------------------------------------------------------------------
-(none)
----------------------------END-OF-HEADER------------------------------
-*/
-
-#ifndef __MMC_PROTOCOL__
-#define __MMC_PROTOCOL__
-
-/* Standard MMC/SD clock speeds */
-#define MMC_CLOCK_SLOW    400000      /* 400 kHz for initial setup */
-#define MMC_CLOCK_FAST  20000000      /* 20 MHz for maximum for normal operation */
-#define SD_CLOCK_FAST   24000000      /* 24 MHz for SD Cards */
- 
-/* Extra MMC commands for state control */
-/* Use negative numbers to disambiguate */
-#define MMC_CIM_RESET            -1
-
-/* Standard MMC commands (3.1)           type  argument     response */
-   /* class 1 */
-#define	MMC_GO_IDLE_STATE         0   /* bc                          */
-#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
-#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
-#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
-#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
-#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
-#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
-#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
-#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
-#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
-#define MMC_SEND_STATUS	         13   /* ac   [31:16] RCA        R1  */
-#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
-
-  /* class 2 */
-#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
-#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
-#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
-
-  /* class 3 */
-#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
-
-  /* class 4 */
-#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
-#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
-#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
-#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
-#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
-
-  /* class 6 */
-#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
-#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
-#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
-
-  /* class 5 */
-#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
-#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
-#define MMC_ERASE                37   /* ac                      R1b */
-
-  /* class 9 */
-#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
-#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
-
-  /* class 7 */
-#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
-
-  /* class 8 */
-#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
-#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1b */
-
-  /* SD class */
-#define SD_SEND_OP_COND          41   /* bcr  [31:0] OCR         R3  */
-#define SET_BUS_WIDTH            6    /* ac   [1:0] bus width    R1  */
-#define SEND_SCR                 51   /* adtc [31:0] staff       R1  */
-
-/* Don't change the order of these; they are used in dispatch tables */
-enum mmc_rsp_t {
-	RESPONSE_NONE   = 0,
-	RESPONSE_R1     = 1,
-	RESPONSE_R1B    = 2,
-	RESPONSE_R2_CID = 3,
-	RESPONSE_R2_CSD  = 4,
-	RESPONSE_R3      = 5,
-	RESPONSE_R4      = 6,
-	RESPONSE_R5      = 7,
-        RESPONSE_R6      = 8,
-};
-
-
-/*
-  MMC status in R1
-  Type
-  	e : error bit
-	s : status bit
-	r : detected and set for the actual command response
-	x : detected and set during command execution. the host must poll
-            the card by sending status command in order to read these bits.
-  Clear condition
-  	a : according to the card state
-	b : always related to the previous command. Reception of
-            a valid command will clear it (with a delay of one command)
-	c : clear by read
- */
-
-#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
-#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
-#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
-#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
-#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
-#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
-#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
-#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
-#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
-#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
-#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
-#define R1_CC_ERROR		(1 << 20)	/* erx, c */
-#define R1_ERROR		(1 << 19)	/* erx, c */
-#define R1_UNDERRUN		(1 << 18)	/* ex, c */
-#define R1_OVERRUN		(1 << 17)	/* ex, c */
-#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
-#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
-#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
-#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
-#define R1_STATUS(x)            (x & 0xFFFFE000)
-#define R1_CURRENT_STATE(x)    	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
-#define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
-#define R1_APP_CMD		(1 << 7)	/* sr, c */
-
-enum card_state {
-	CARD_STATE_EMPTY = -1,
-	CARD_STATE_IDLE	 = 0,
-	CARD_STATE_READY = 1,
-	CARD_STATE_IDENT = 2,
-	CARD_STATE_STBY	 = 3,
-	CARD_STATE_TRAN	 = 4,
-	CARD_STATE_DATA	 = 5,
-	CARD_STATE_RCV	 = 6,
-	CARD_STATE_PRG	 = 7,
-	CARD_STATE_DIS	 = 8,
-};
-
-/* These are unpacked versions of the actual responses */
-
- struct mmc_response_r1 {
-	u8  cmd;
-	u32 status;
-};
-
-typedef struct mmc_cid {
-	u8  mid;
-	u16 oid;
-	u8  pnm[7];   /* Product name (we null-terminate) */
-	u8  prv;
-	u32 psn;
-	u8  mdt;
-}mmc_cid_t;
-
-typedef struct mmc_csd {
-	u8  csd_structure;
-	u8  spec_vers;
-	u8  taac;
-	u8  nsac;
-	u8  tran_speed;
-	u16 ccc;
-	u8  read_bl_len;
-	u8  read_bl_partial;
-	u8  write_blk_misalign;
-	u8  read_blk_misalign;
-	u8  dsr_imp;
-	u16 c_size;
-	u8  vdd_r_curr_min;
-	u8  vdd_r_curr_max;
-	u8  vdd_w_curr_min;
-	u8  vdd_w_curr_max;
-	u8  c_size_mult;
-	union {
-		struct { /* MMC system specification version 3.1 */
-			u8  erase_grp_size;
-			u8  erase_grp_mult;
-		} v31;
-		struct { /* MMC system specification version 2.2 */
-			u8  sector_size;
-			u8  erase_grp_size;
-		} v22;
-	} erase;
-	u8  wp_grp_size;
-	u8  wp_grp_enable;
-	u8  default_ecc;
-	u8  r2w_factor;
-	u8  write_bl_len;
-	u8  write_bl_partial;
-	u8  file_format_grp;
-	u8  copy;
-	u8  perm_write_protect;
-	u8  tmp_write_protect;
-	u8  file_format;
-	u8  ecc;
-}mmc_csd_t;;
-
-struct mmc_response_r3 {
-	u32 ocr;
-};
-
-#define MMC_VDD_145_150	0x00000001	/* VDD voltage 1.45 - 1.50 */
-#define MMC_VDD_150_155	0x00000002	/* VDD voltage 1.50 - 1.55 */
-#define MMC_VDD_155_160	0x00000004	/* VDD voltage 1.55 - 1.60 */
-#define MMC_VDD_160_165	0x00000008	/* VDD voltage 1.60 - 1.65 */
-#define MMC_VDD_165_170	0x00000010	/* VDD voltage 1.65 - 1.70 */
-#define MMC_VDD_17_18	0x00000020	/* VDD voltage 1.7 - 1.8 */
-#define MMC_VDD_18_19	0x00000040	/* VDD voltage 1.8 - 1.9 */
-#define MMC_VDD_19_20	0x00000080	/* VDD voltage 1.9 - 2.0 */
-#define MMC_VDD_20_21	0x00000100	/* VDD voltage 2.0 ~ 2.1 */
-#define MMC_VDD_21_22	0x00000200	/* VDD voltage 2.1 ~ 2.2 */
-#define MMC_VDD_22_23	0x00000400	/* VDD voltage 2.2 ~ 2.3 */
-#define MMC_VDD_23_24	0x00000800	/* VDD voltage 2.3 ~ 2.4 */
-#define MMC_VDD_24_25	0x00001000	/* VDD voltage 2.4 ~ 2.5 */
-#define MMC_VDD_25_26	0x00002000	/* VDD voltage 2.5 ~ 2.6 */
-#define MMC_VDD_26_27	0x00004000	/* VDD voltage 2.6 ~ 2.7 */
-#define MMC_VDD_27_28	0x00008000	/* VDD voltage 2.7 ~ 2.8 */
-#define MMC_VDD_28_29	0x00010000	/* VDD voltage 2.8 ~ 2.9 */
-#define MMC_VDD_29_30	0x00020000	/* VDD voltage 2.9 ~ 3.0 */
-#define MMC_VDD_30_31	0x00040000	/* VDD voltage 3.0 ~ 3.1 */
-#define MMC_VDD_31_32	0x00080000	/* VDD voltage 3.1 ~ 3.2 */
-#define MMC_VDD_32_33	0x00100000	/* VDD voltage 3.2 ~ 3.3 */
-#define MMC_VDD_33_34	0x00200000	/* VDD voltage 3.3 ~ 3.4 */
-#define MMC_VDD_34_35	0x00400000	/* VDD voltage 3.4 ~ 3.5 */
-#define MMC_VDD_35_36	0x00800000	/* VDD voltage 3.5 ~ 3.6 */
-#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
-
-
-/* CSD field definitions */
-
-#define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
-#define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
-#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1       */
-
-#define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
-#define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
-#define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
-#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 */
-
-#if MMC_DEBUG_LEVEL
-
-#define DEBUG(n, args...)			\
-    do {    \
-	if (n <=  MMC_DEBUG_LEVEL) {	\
-		printf(args);	\
-	}    \
-    } while(0)
-#else
-#define DEBUG(n, args...)
-#endif /* MMC_DEBUG_EN */
-
-#endif  /* __MMC_PROTOCOL__ */