Add rt2x00-mac80211 snapshot (#1916)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8184 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 1358 insertions, 0 deletions

diff --git a/package/rt2x00/src/rt61pci.h b/package/rt2x00/src/rt61pci.h
new file mode 100644
index 0000000000..68347324c9
--- /dev/null
+++ b/package/rt2x00/src/rt61pci.h
@@ -0,0 +1,1358 @@
+/*
+	Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt61pci
+	Abstract: Data structures and registers for the rt61pci module.
+	Supported chipsets: RT2561, RT2561s, RT2661.
+ */
+
+#ifndef RT61PCI_H
+#define RT61PCI_H
+
+/*
+ * RF chip defines.
+ */
+#define RF5225				0x0001
+#define RF5325				0x0002
+#define RF2527				0x0003
+#define RF2529				0x0004
+
+/*
+ * Max RSSI value, required for RSSI <-> dBm conversion.
+ */
+#define MAX_RX_SSI			120
+#define MAX_RX_NOISE			-110
+
+/*
+ * Register layout information.
+ */
+#define CSR_REG_BASE			0x3000
+#define CSR_REG_SIZE			0x04b0
+#define EEPROM_BASE			0x0000
+#define EEPROM_SIZE			0x0100
+#define BBP_SIZE			0x0080
+
+/*
+ * PCI registers.
+ */
+
+/*
+ * PCI Configuration Header
+ */
+#define PCI_CONFIG_HEADER_VENDOR	0x0000
+#define PCI_CONFIG_HEADER_DEVICE	0x0002
+
+/*
+ * HOST_CMD_CSR: For HOST to interrupt embedded processor
+ */
+#define HOST_CMD_CSR			0x0008
+#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x0000007f)
+#define HOST_CMD_CSR_INTERRUPT_MCU	FIELD32(0x00000080)
+
+/*
+ * MCU_CNTL_CSR
+ * SELECT_BANK: Select 8051 program bank.
+ * RESET: Enable 8051 reset state.
+ * READY: Ready state for 8051.
+ */
+#define MCU_CNTL_CSR			0x000c
+#define MCU_CNTL_CSR_SELECT_BANK	FIELD32(0x00000001)
+#define MCU_CNTL_CSR_RESET		FIELD32(0x00000002)
+#define MCU_CNTL_CSR_READY		FIELD32(0x00000004)
+
+/*
+ * SOFT_RESET_CSR
+ */
+#define SOFT_RESET_CSR			0x0010
+
+/*
+ * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register.
+ */
+#define MCU_INT_SOURCE_CSR		0x0014
+#define MCU_INT_SOURCE_CSR_0		FIELD32(0x00000001)
+#define MCU_INT_SOURCE_CSR_1		FIELD32(0x00000002)
+#define MCU_INT_SOURCE_CSR_2		FIELD32(0x00000004)
+#define MCU_INT_SOURCE_CSR_3		FIELD32(0x00000008)
+#define MCU_INT_SOURCE_CSR_4		FIELD32(0x00000010)
+#define MCU_INT_SOURCE_CSR_5		FIELD32(0x00000020)
+#define MCU_INT_SOURCE_CSR_6		FIELD32(0x00000040)
+#define MCU_INT_SOURCE_CSR_7		FIELD32(0x00000080)
+#define MCU_INT_SOURCE_CSR_TWAKEUP	FIELD32(0x00000100)
+#define MCU_INT_SOURCE_CSR_TBTT_EXPIRE	FIELD32(0x00000200)
+
+/*
+ * MCU_INT_MASK_CSR: MCU interrupt source/mask register.
+ */
+#define MCU_INT_MASK_CSR		0x0018
+#define MCU_INT_MASK_CSR_0		FIELD32(0x00000001)
+#define MCU_INT_MASK_CSR_1		FIELD32(0x00000002)
+#define MCU_INT_MASK_CSR_2		FIELD32(0x00000004)
+#define MCU_INT_MASK_CSR_3		FIELD32(0x00000008)
+#define MCU_INT_MASK_CSR_4		FIELD32(0x00000010)
+#define MCU_INT_MASK_CSR_5		FIELD32(0x00000020)
+#define MCU_INT_MASK_CSR_6		FIELD32(0x00000040)
+#define MCU_INT_MASK_CSR_7		FIELD32(0x00000080)
+#define MCU_INT_MASK_CSR_TWAKEUP	FIELD32(0x00000100)
+#define MCU_INT_MASK_CSR_TBTT_EXPIRE	FIELD32(0x00000200)
+
+/*
+ * PCI_USEC_CSR
+ */
+#define PCI_USEC_CSR			0x001c
+
+/*
+ * Security key table memory.
+ * 16 entries 32-byte for shared key table
+ * 64 entries 32-byte for pairwise key table
+ * 64 entries 8-byte for pairwise ta key table
+ */
+#define SHARED_KEY_TABLE_BASE		0x1000
+#define PAIRWISE_KEY_TABLE_BASE		0x1200
+#define PAIRWISE_TA_TABLE_BASE		0x1a00
+
+struct hw_key_entry {
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+} __attribute__ ((packed));
+
+struct hw_pairwise_ta_entry {
+	u8 address[6];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+/*
+ * Other on-chip shared memory space.
+ */
+#define HW_CIS_BASE			0x2000
+#define HW_NULL_BASE			0x2b00
+
+/*
+ * Since NULL frame won't be that long (256 byte),
+ * We steal 16 tail bytes to save debugging settings.
+ */
+#define HW_DEBUG_SETTING_BASE		0x2bf0
+
+/*
+ * On-chip BEACON frame space.
+ */
+#define HW_BEACON_BASE0			0x2c00
+#define HW_BEACON_BASE1			0x2d00
+#define HW_BEACON_BASE2			0x2e00
+#define HW_BEACON_BASE3			0x2f00
+#define HW_BEACON_OFFSET		0x0100
+
+/*
+ * HOST-MCU shared memory.
+ */
+
+/*
+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ */
+#define H2M_MAILBOX_CSR			0x2100
+#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
+
+/*
+ * MCU_LEDCS: LED control for MCU Mailbox.
+ */
+#define MCU_LEDCS_LED_MODE		FIELD16(0x001f)
+#define MCU_LEDCS_RADIO_STATUS		FIELD16(0x0020)
+#define MCU_LEDCS_LINK_BG_STATUS	FIELD16(0x0040)
+#define MCU_LEDCS_LINK_A_STATUS		FIELD16(0x0080)
+#define MCU_LEDCS_POLARITY_GPIO_0	FIELD16(0x0100)
+#define MCU_LEDCS_POLARITY_GPIO_1	FIELD16(0x0200)
+#define MCU_LEDCS_POLARITY_GPIO_2	FIELD16(0x0400)
+#define MCU_LEDCS_POLARITY_GPIO_3	FIELD16(0x0800)
+#define MCU_LEDCS_POLARITY_GPIO_4	FIELD16(0x1000)
+#define MCU_LEDCS_POLARITY_ACT		FIELD16(0x2000)
+#define MCU_LEDCS_POLARITY_READY_BG	FIELD16(0x4000)
+#define MCU_LEDCS_POLARITY_READY_A	FIELD16(0x8000)
+
+/*
+ * M2H_CMD_DONE_CSR.
+ */
+#define M2H_CMD_DONE_CSR		0x2104
+
+/*
+ * MCU_TXOP_ARRAY_BASE.
+ */
+#define MCU_TXOP_ARRAY_BASE		0x2110
+
+/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * MAC_CSR0: ASIC revision number.
+ */
+#define MAC_CSR0			0x3000
+
+/*
+ * MAC_CSR1: System control register.
+ * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
+ * BBP_RESET: Hardware reset BBP.
+ * HOST_READY: Host is ready after initialization, 1: ready.
+ */
+#define MAC_CSR1			0x3004
+#define MAC_CSR1_SOFT_RESET		FIELD32(0x00000001)
+#define MAC_CSR1_BBP_RESET		FIELD32(0x00000002)
+#define MAC_CSR1_HOST_READY		FIELD32(0x00000004)
+
+/*
+ * MAC_CSR2: STA MAC register 0.
+ */
+#define MAC_CSR2			0x3008
+#define MAC_CSR2_BYTE0			FIELD32(0x000000ff)
+#define MAC_CSR2_BYTE1			FIELD32(0x0000ff00)
+#define MAC_CSR2_BYTE2			FIELD32(0x00ff0000)
+#define MAC_CSR2_BYTE3			FIELD32(0xff000000)
+
+/*
+ * MAC_CSR3: STA MAC register 1.
+ */
+#define MAC_CSR3			0x300c
+#define MAC_CSR3_BYTE4			FIELD32(0x000000ff)
+#define MAC_CSR3_BYTE5			FIELD32(0x0000ff00)
+#define MAC_CSR3_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
+
+/*
+ * MAC_CSR4: BSSID register 0.
+ */
+#define MAC_CSR4			0x3010
+#define MAC_CSR4_BYTE0			FIELD32(0x000000ff)
+#define MAC_CSR4_BYTE1			FIELD32(0x0000ff00)
+#define MAC_CSR4_BYTE2			FIELD32(0x00ff0000)
+#define MAC_CSR4_BYTE3			FIELD32(0xff000000)
+
+/*
+ * MAC_CSR5: BSSID register 1.
+ * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID.
+ */
+#define MAC_CSR5			0x3014
+#define MAC_CSR5_BYTE4			FIELD32(0x000000ff)
+#define MAC_CSR5_BYTE5			FIELD32(0x0000ff00)
+#define MAC_CSR5_BSS_ID_MASK		FIELD32(0x00ff0000)
+
+/*
+ * MAC_CSR6: Maximum frame length register.
+ */
+#define MAC_CSR6			0x3018
+#define MAC_CSR6_MAX_FRAME_UNIT		FIELD32(0x000007ff)
+
+/*
+ * MAC_CSR7: Reserved
+ */
+#define MAC_CSR7			0x301c
+
+/*
+ * MAC_CSR8: SIFS/EIFS register.
+ * All units are in US.
+ */
+#define MAC_CSR8			0x3020
+#define MAC_CSR8_SIFS			FIELD32(0x000000ff)
+#define MAC_CSR8_SIFS_AFTER_RX_OFDM	FIELD32(0x0000ff00)
+#define MAC_CSR8_EIFS			FIELD32(0xffff0000)
+
+/*
+ * MAC_CSR9: Back-Off control register.
+ * SLOT_TIME: Slot time, default is 20us for 802.11BG.
+ * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
+ * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
+ * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
+ */
+#define MAC_CSR9			0x3024
+#define MAC_CSR9_SLOT_TIME		FIELD32(0x000000ff)
+#define MAC_CSR9_CWMIN			FIELD32(0x00000f00)
+#define MAC_CSR9_CWMAX			FIELD32(0x0000f000)
+#define MAC_CSR9_CW_SELECT		FIELD32(0x00010000)
+
+/*
+ * MAC_CSR10: Power state configuration.
+ */
+#define MAC_CSR10			0x3028
+
+/*
+ * MAC_CSR11: Power saving transition time register.
+ * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
+ * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
+ * WAKEUP_LATENCY: In unit of TU.
+ */
+#define MAC_CSR11			0x302c
+#define MAC_CSR11_DELAY_AFTER_TBCN	FIELD32(0x000000ff)
+#define MAC_CSR11_TBCN_BEFORE_WAKEUP	FIELD32(0x00007f00)
+#define MAC_CSR11_AUTOWAKE		FIELD32(0x00008000)
+#define MAC_CSR11_WAKEUP_LATENCY	FIELD32(0x000f0000)
+
+/*
+ * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
+ * CURRENT_STATE: 0:sleep, 1:awake.
+ * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
+ * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
+ */
+#define MAC_CSR12			0x3030
+#define MAC_CSR12_CURRENT_STATE		FIELD32(0x00000001)
+#define MAC_CSR12_PUT_TO_SLEEP		FIELD32(0x00000002)
+#define MAC_CSR12_FORCE_WAKEUP		FIELD32(0x00000004)
+#define MAC_CSR12_BBP_CURRENT_STATE	FIELD32(0x00000008)
+
+/*
+ * MAC_CSR13: GPIO.
+ */
+#define MAC_CSR13			0x3034
+#define MAC_CSR13_BIT0			FIELD32(0x00000001)
+#define MAC_CSR13_BIT1			FIELD32(0x00000002)
+#define MAC_CSR13_BIT2			FIELD32(0x00000004)
+#define MAC_CSR13_BIT3			FIELD32(0x00000008)
+#define MAC_CSR13_BIT4			FIELD32(0x00000010)
+#define MAC_CSR13_BIT5			FIELD32(0x00000020)
+#define MAC_CSR13_BIT6			FIELD32(0x00000040)
+#define MAC_CSR13_BIT7			FIELD32(0x00000080)
+
+/*
+ * MAC_CSR14: LED control register.
+ * ON_PERIOD: On period, default 70ms.
+ * OFF_PERIOD: Off period, default 30ms.
+ * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
+ * SW_LED: s/w LED, 1: ON, 0: OFF.
+ * HW_LED_POLARITY: 0: active low, 1: active high.
+ */
+#define MAC_CSR14			0x3038
+#define MAC_CSR14_ON_PERIOD		FIELD32(0x000000ff)
+#define MAC_CSR14_OFF_PERIOD		FIELD32(0x0000ff00)
+#define MAC_CSR14_HW_LED		FIELD32(0x00010000)
+#define MAC_CSR14_SW_LED		FIELD32(0x00020000)
+#define MAC_CSR14_HW_LED_POLARITY	FIELD32(0x00040000)
+#define MAC_CSR14_SW_LED2		FIELD32(0x00080000)
+
+/*
+ * MAC_CSR15: NAV control.
+ */
+#define MAC_CSR15			0x303c
+
+/*
+ * TXRX control registers.
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * TXRX_CSR0: TX/RX configuration register.
+ * TSF_OFFSET: Default is 24.
+ * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
+ * DISABLE_RX: Disable Rx engine.
+ * DROP_CRC: Drop CRC error.
+ * DROP_PHYSICAL: Drop physical error.
+ * DROP_CONTROL: Drop control frame.
+ * DROP_NOT_TO_ME: Drop not to me unicast frame.
+ * DROP_TO_DS: Drop fram ToDs bit is true.
+ * DROP_VERSION_ERROR: Drop version error frame.
+ * DROP_MULTICAST: Drop multicast frames.
+ * DROP_BORADCAST: Drop broadcast frames.
+ * ROP_ACK_CTS: Drop received ACK and CTS.
+ */
+#define TXRX_CSR0			0x3040
+#define TXRX_CSR0_RX_ACK_TIMEOUT	FIELD32(0x000001ff)
+#define TXRX_CSR0_TSF_OFFSET		FIELD32(0x00007e00)
+#define TXRX_CSR0_AUTO_TX_SEQ		FIELD32(0x00008000)
+#define TXRX_CSR0_DISABLE_RX		FIELD32(0x00010000)
+#define TXRX_CSR0_DROP_CRC		FIELD32(0x00020000)
+#define TXRX_CSR0_DROP_PHYSICAL		FIELD32(0x00040000)
+#define TXRX_CSR0_DROP_CONTROL		FIELD32(0x00080000)
+#define TXRX_CSR0_DROP_NOT_TO_ME	FIELD32(0x00100000)
+#define TXRX_CSR0_DROP_TO_DS		FIELD32(0x00200000)
+#define TXRX_CSR0_DROP_VERSION_ERROR	FIELD32(0x00400000)
+#define TXRX_CSR0_DROP_MULTICAST	FIELD32(0x00800000)
+#define TXRX_CSR0_DROP_BORADCAST	FIELD32(0x01000000)
+#define TXRX_CSR0_DROP_ACK_CTS		FIELD32(0x02000000)
+#define TXRX_CSR0_TX_WITHOUT_WAITING	FIELD32(0x04000000)
+
+/*
+ * TXRX_CSR1
+ */
+#define TXRX_CSR1			0x3044
+
+/*
+ * TXRX_CSR2
+ */
+#define TXRX_CSR2			0x3048
+
+/*
+ * TXRX_CSR3
+ */
+#define TXRX_CSR3			0x304c
+
+/*
+ * TXRX_CSR4: Auto-Responder/Tx-retry register.
+ * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
+ * OFDM_TX_RATE_DOWN: 1:enable.
+ * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
+ * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
+ */
+#define TXRX_CSR4			0x3050
+#define TXRX_CSR4_TX_ACK_TIMEOUT	FIELD32(0x000000ff)
+#define TXRX_CSR4_CNTL_ACK_POLICY	FIELD32(0x00000700)
+#define TXRX_CSR4_ACK_CTS_PSM		FIELD32(0x00010000)
+#define TXRX_CSR4_AUTORESPOND_ENABLE	FIELD32(0x00020000)
+#define TXRX_CSR4_AUTORESPOND_PREAMBLE	FIELD32(0x00040000)
+#define TXRX_CSR4_OFDM_TX_RATE_DOWN	FIELD32(0x00080000)
+#define TXRX_CSR4_OFDM_TX_RATE_STEP	FIELD32(0x00300000)
+#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK	FIELD32(0x00400000)
+#define TXRX_CSR4_LONG_RETRY_LIMIT	FIELD32(0x0f000000)
+#define TXRX_CSR4_SHORT_RETRY_LIMIT	FIELD32(0xf0000000)
+
+/*
+ * TXRX_CSR5
+ */
+#define TXRX_CSR5			0x3054
+
+/*
+ * ACK/CTS payload consumed time registers.
+ */
+#define TXRX_CSR6			0x3058
+#define TXRX_CSR7			0x305c
+#define TXRX_CSR8			0x3060
+
+/*
+ * TXRX_CSR9: Synchronization control register.
+ * BEACON_INTERVAL: In unit of 1/16 TU.
+ * TSF_TICKING: Enable TSF auto counting.
+ * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
+ * BEACON_GEN: Enable beacon generator.
+ */
+#define TXRX_CSR9			0x3064
+#define TXRX_CSR9_BEACON_INTERVAL	FIELD32(0x0000ffff)
+#define TXRX_CSR9_TSF_TICKING		FIELD32(0x00010000)
+#define TXRX_CSR9_TSF_SYNC		FIELD32(0x00060000)
+#define TXRX_CSR9_TBTT_ENABLE		FIELD32(0x00080000)
+#define TXRX_CSR9_BEACON_GEN		FIELD32(0x00100000)
+#define TXRX_CSR9_TIMESTAMP_COMPENSATE	FIELD32(0xff000000)
+
+/*
+ * TXRX_CSR10: BEACON alignment.
+ */
+#define TXRX_CSR10			0x3068
+
+/*
+ * TXRX_CSR11: AES mask.
+ */
+#define TXRX_CSR11			0x306c
+
+/*
+ * TXRX_CSR12: TSF low 32.
+ */
+#define TXRX_CSR12			0x3070
+#define TXRX_CSR12_LOW_TSFTIMER		FIELD32(0xffffffff)
+
+/*
+ * TXRX_CSR13: TSF high 32.
+ */
+#define TXRX_CSR13			0x3074
+#define TXRX_CSR13_HIGH_TSFTIMER	FIELD32(0xffffffff)
+
+/*
+ * TXRX_CSR14: TBTT timer.
+ */
+#define TXRX_CSR14			0x3078
+
+/*
+ * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
+ */
+#define TXRX_CSR15			0x307c
+
+
+/*
+ * PHY control registers.
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * PHY_CSR0: RF/PS control.
+ */
+#define PHY_CSR0			0x3080
+#define PHY_CSR0_PA_PE_BG		FIELD32(0x00010000)
+#define PHY_CSR0_PA_PE_A		FIELD32(0x00020000)
+
+/*
+ * PHY_CSR1
+ */
+#define PHY_CSR1			0x3084
+
+/*
+ * PHY_CSR2: Pre-TX BBP control.
+ */
+#define PHY_CSR2			0x3088
+
+/*
+ * PHY_CSR3: BBP serial control register.
+ * VALUE: Register value to program into BBP.
+ * REG_NUM: Selected BBP register.
+ * READ_CONTROL: 0: Write BBP, 1: Read BBP.
+ * BUSY: 1: ASIC is busy execute BBP programming.
+ */
+#define PHY_CSR3			0x308c
+#define PHY_CSR3_VALUE			FIELD32(0x000000ff)
+#define PHY_CSR3_REGNUM			FIELD32(0x00007f00)
+#define PHY_CSR3_READ_CONTROL		FIELD32(0x00008000)
+#define PHY_CSR3_BUSY			FIELD32(0x00010000)
+
+/*
+ * PHY_CSR4: RF serial control register
+ * VALUE: Register value (include register id) serial out to RF/IF chip.
+ * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
+ * IF_SELECT: 1: select IF to program, 0: select RF to program.
+ * PLL_LD: RF PLL_LD status.
+ * BUSY: 1: ASIC is busy execute RF programming.
+ */
+#define PHY_CSR4			0x3090
+#define PHY_CSR4_VALUE			FIELD32(0x00ffffff)
+#define PHY_CSR4_NUMBER_OF_BITS		FIELD32(0x1f000000)
+#define PHY_CSR4_IF_SELECT		FIELD32(0x20000000)
+#define PHY_CSR4_PLL_LD			FIELD32(0x40000000)
+#define PHY_CSR4_BUSY			FIELD32(0x80000000)
+
+/*
+ * PHY_CSR5: RX to TX signal switch timing control.
+ */
+#define PHY_CSR5			0x3094
+
+/*
+ * PHY_CSR6: TX to RX signal timing control.
+ */
+#define PHY_CSR6			0x3098
+
+/*
+ * PHY_CSR7: TX DAC switching timing control.
+ */
+#define PHY_CSR7			0x309c
+
+/*
+ * Security control register.
+ */
+
+/*
+ * SEC_CSR0: Shared key table control.
+ */
+#define SEC_CSR0			0x30a0
+
+/*
+ * SEC_CSR1: Shared key table security mode register.
+ */
+#define SEC_CSR1			0x30a4
+#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG	FIELD32(0x00000007)
+#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG	FIELD32(0x00000070)
+#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG	FIELD32(0x00000700)
+#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG	FIELD32(0x00007000)
+#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG	FIELD32(0x00070000)
+#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG	FIELD32(0x00700000)
+#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG	FIELD32(0x07000000)
+#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG	FIELD32(0x70000000)
+
+/*
+ * Pairwise key table valid bitmap registers.
+ * SEC_CSR2: pairwise key table valid bitmap 0.
+ * SEC_CSR3: pairwise key table valid bitmap 1.
+ */
+#define SEC_CSR2			0x30a8
+#define SEC_CSR3			0x30ac
+
+/*
+ * SEC_CSR4: Pairwise key table lookup control.
+ */
+#define SEC_CSR4			0x30b0
+
+/*
+ * SEC_CSR5: shared key table security mode register.
+ */
+#define SEC_CSR5			0x30b4
+#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG	FIELD32(0x00000007)
+#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG	FIELD32(0x00000070)
+#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG	FIELD32(0x00000700)
+#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG	FIELD32(0x00007000)
+#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG	FIELD32(0x00070000)
+#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG	FIELD32(0x00700000)
+#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG	FIELD32(0x07000000)
+#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG	FIELD32(0x70000000)
+
+/*
+ * STA control registers.
+ */
+
+/*
+ * STA_CSR0: RX PLCP error count & RX FCS error count.
+ */
+#define STA_CSR0			0x30c0
+#define STA_CSR0_FCS_ERROR		FIELD32(0x0000ffff)
+#define STA_CSR0_PLCP_ERROR		FIELD32(0xffff0000)
+
+/*
+ * STA_CSR1: RX False CCA count & RX LONG frame count.
+ */
+#define STA_CSR1			0x30c4
+#define STA_CSR1_PHYSICAL_ERROR		FIELD32(0x0000ffff)
+#define STA_CSR1_FALSE_CCA_ERROR	FIELD32(0xffff0000)
+
+/*
+ * STA_CSR2: TX Beacon count and RX FIFO overflow count.
+ */
+#define STA_CSR2			0x30c8
+#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT	FIELD32(0x0000ffff)
+#define STA_CSR2_RX_OVERFLOW_COUNT	FIELD32(0xffff0000)
+
+/*
+ * STA_CSR3: TX Beacon count.
+ */
+#define STA_CSR3			0x30cc
+#define STA_CSR3_TX_BEACON_COUNT	FIELD32(0x0000ffff)
+
+/*
+ * STA_CSR4: TX Result status register.
+ * VALID: 1:This register contains a valid TX result.
+ */
+#define STA_CSR4			0x30d0
+#define STA_CSR4_VALID			FIELD32(0x00000001)
+#define STA_CSR4_TX_RESULT		FIELD32(0x0000000e)
+#define STA_CSR4_RETRY_COUNT		FIELD32(0x000000f0)
+#define STA_CSR4_PID_SUBTYPE		FIELD32(0x00001f00)
+#define STA_CSR4_PID_TYPE		FIELD32(0x0000e000)
+#define STA_CSR4_TXRATE			FIELD32(0x000f0000)
+
+/*
+ * QOS control registers.
+ */
+
+/*
+ * QOS_CSR0: TXOP holder MAC address register.
+ */
+#define QOS_CSR0			0x30e0
+#define QOS_CSR0_BYTE0			FIELD32(0x000000ff)
+#define QOS_CSR0_BYTE1			FIELD32(0x0000ff00)
+#define QOS_CSR0_BYTE2			FIELD32(0x00ff0000)
+#define QOS_CSR0_BYTE3			FIELD32(0xff000000)
+
+/*
+ * QOS_CSR1: TXOP holder MAC address register.
+ */
+#define QOS_CSR1			0x30e4
+#define QOS_CSR1_BYTE4			FIELD32(0x000000ff)
+#define QOS_CSR1_BYTE5			FIELD32(0x0000ff00)
+
+/*
+ * QOS_CSR2: TXOP holder timeout register.
+ */
+#define QOS_CSR2			0x30e8
+
+/*
+ * RX QOS-CFPOLL MAC address register.
+ * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
+ * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
+ */
+#define QOS_CSR3			0x30ec
+#define QOS_CSR4			0x30f0
+
+/*
+ * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
+ */
+#define QOS_CSR5			0x30f4
+
+/*
+ * Host DMA registers.
+ */
+
+/*
+ * AC0_BASE_CSR: AC_BK base address.
+ */
+#define AC0_BASE_CSR			0x3400
+#define AC0_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
+
+/*
+ * AC1_BASE_CSR: AC_BE base address.
+ */
+#define AC1_BASE_CSR			0x3404
+#define AC1_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
+
+/*
+ * AC2_BASE_CSR: AC_VI base address.
+ */
+#define AC2_BASE_CSR			0x3408
+#define AC2_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
+
+/*
+ * AC3_BASE_CSR: AC_VO base address.
+ */
+#define AC3_BASE_CSR			0x340c
+#define AC3_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
+
+/*
+ * MGMT_BASE_CSR: MGMT ring base address.
+ */
+#define MGMT_BASE_CSR			0x3410
+#define MGMT_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
+
+/*
+ * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
+ */
+#define TX_RING_CSR0			0x3418
+#define TX_RING_CSR0_AC0_RING_SIZE	FIELD32(0x000000ff)
+#define TX_RING_CSR0_AC1_RING_SIZE	FIELD32(0x0000ff00)
+#define TX_RING_CSR0_AC2_RING_SIZE	FIELD32(0x00ff0000)
+#define TX_RING_CSR0_AC3_RING_SIZE	FIELD32(0xff000000)
+
+/*
+ * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring
+ * TXD_SIZE: In unit of 32-bit.
+ */
+#define TX_RING_CSR1			0x341c
+#define TX_RING_CSR1_MGMT_RING_SIZE	FIELD32(0x000000ff)
+#define TX_RING_CSR1_HCCA_RING_SIZE	FIELD32(0x0000ff00)
+#define TX_RING_CSR1_TXD_SIZE		FIELD32(0x003f0000)
+
+/*
+ * AIFSN_CSR: AIFSN for each EDCA AC.
+ * AIFSN0: For AC_BK.
+ * AIFSN1: For AC_BE.
+ * AIFSN2: For AC_VI.
+ * AIFSN3: For AC_VO.
+ */
+#define AIFSN_CSR			0x3420
+#define AIFSN_CSR_AIFSN0		FIELD32(0x0000000f)
+#define AIFSN_CSR_AIFSN1		FIELD32(0x000000f0)
+#define AIFSN_CSR_AIFSN2		FIELD32(0x00000f00)
+#define AIFSN_CSR_AIFSN3		FIELD32(0x0000f000)
+
+/*
+ * CWMIN_CSR: CWmin for each EDCA AC.
+ * CWMIN0: For AC_BK.
+ * CWMIN1: For AC_BE.
+ * CWMIN2: For AC_VI.
+ * CWMIN3: For AC_VO.
+ */
+#define CWMIN_CSR			0x3424
+#define CWMIN_CSR_CWMIN0		FIELD32(0x0000000f)
+#define CWMIN_CSR_CWMIN1		FIELD32(0x000000f0)
+#define CWMIN_CSR_CWMIN2		FIELD32(0x00000f00)
+#define CWMIN_CSR_CWMIN3		FIELD32(0x0000f000)
+
+/*
+ * CWMAX_CSR: CWmax for each EDCA AC.
+ * CWMAX0: For AC_BK.
+ * CWMAX1: For AC_BE.
+ * CWMAX2: For AC_VI.
+ * CWMAX3: For AC_VO.
+ */
+#define CWMAX_CSR			0x3428
+#define CWMAX_CSR_CWMAX0		FIELD32(0x0000000f)
+#define CWMAX_CSR_CWMAX1		FIELD32(0x000000f0)
+#define CWMAX_CSR_CWMAX2		FIELD32(0x00000f00)
+#define CWMAX_CSR_CWMAX3		FIELD32(0x0000f000)
+
+/*
+ * TX_DMA_DST_CSR
+ */
+#define TX_DMA_DST_CSR			0x342c
+
+/*
+ * TX_CNTL_CSR: KICK/Abort TX.
+ * KICK_TX_AC0: For AC_BK.
+ * KICK_TX_AC1: For AC_BE.
+ * KICK_TX_AC2: For AC_VI.
+ * KICK_TX_AC3: For AC_VO.
+ * ABORT_TX_AC0: For AC_BK.
+ * ABORT_TX_AC1: For AC_BE.
+ * ABORT_TX_AC2: For AC_VI.
+ * ABORT_TX_AC3: For AC_VO.
+ */
+#define TX_CNTL_CSR			0x3430
+#define TX_CNTL_CSR_KICK_TX_AC0		FIELD32(0x00000001)
+#define TX_CNTL_CSR_KICK_TX_AC1		FIELD32(0x00000002)
+#define TX_CNTL_CSR_KICK_TX_AC2		FIELD32(0x00000004)
+#define TX_CNTL_CSR_KICK_TX_AC3		FIELD32(0x00000008)
+#define TX_CNTL_CSR_KICK_TX_MGMT	FIELD32(0x00000010)
+#define TX_CNTL_CSR_ABORT_TX_AC0	FIELD32(0x00010000)
+#define TX_CNTL_CSR_ABORT_TX_AC1	FIELD32(0x00020000)
+#define TX_CNTL_CSR_ABORT_TX_AC2	FIELD32(0x00040000)
+#define TX_CNTL_CSR_ABORT_TX_AC3	FIELD32(0x00080000)
+#define TX_CNTL_CSR_ABORT_TX_MGMT	FIELD32(0x00100000)
+
+/*
+ * LOAD_TX_RING_CSR
+ */
+#define LOAD_TX_RING_CSR		0x3434
+
+/*
+ * Several read-only registers, for debugging.
+ */
+#define AC0_TXPTR_CSR			0x3438
+#define AC1_TXPTR_CSR			0x343c
+#define AC2_TXPTR_CSR			0x3440
+#define AC3_TXPTR_CSR			0x3444
+#define MGMT_TXPTR_CSR			0x3448
+
+/*
+ * RX_BASE_CSR
+ */
+#define RX_BASE_CSR			0x3450
+#define RX_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
+
+/*
+ * RX_RING_CSR.
+ * RXD_SIZE: In unit of 32-bit.
+ */
+#define RX_RING_CSR			0x3454
+#define RX_RING_CSR_RING_SIZE		FIELD32(0x000000ff)
+#define RX_RING_CSR_RXD_SIZE		FIELD32(0x00003f00)
+#define RX_RING_CSR_RXD_WRITEBACK_SIZE	FIELD32(0x00070000)
+
+/*
+ * RX_CNTL_CSR
+ */
+#define RX_CNTL_CSR			0x3458
+
+/*
+ * RXPTR_CSR: Read-only, for debugging.
+ */
+#define RXPTR_CSR			0x345c
+
+/*
+ * PCI_CFG_CSR
+ */
+#define PCI_CFG_CSR			0x3460
+
+/*
+ * BUF_FORMAT_CSR
+ */
+#define BUF_FORMAT_CSR			0x3464
+
+/*
+ * INT_SOURCE_CSR: Interrupt source register.
+ * Write one to clear corresponding bit.
+ */
+#define INT_SOURCE_CSR			0x3468
+#define INT_SOURCE_CSR_TXDONE		FIELD32(0x00000001)
+#define INT_SOURCE_CSR_RXDONE		FIELD32(0x00000002)
+#define INT_SOURCE_CSR_BEACON_DONE	FIELD32(0x00000004)
+#define INT_SOURCE_CSR_TX_ABORT_DONE	FIELD32(0x00000010)
+#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00010000)
+#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00020000)
+#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00040000)
+#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00080000)
+#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00100000)
+#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00200000)
+
+/*
+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
+ * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock.
+ */
+#define INT_MASK_CSR			0x346c
+#define INT_MASK_CSR_TXDONE		FIELD32(0x00000001)
+#define INT_MASK_CSR_RXDONE		FIELD32(0x00000002)
+#define INT_MASK_CSR_BEACON_DONE	FIELD32(0x00000004)
+#define INT_MASK_CSR_TX_ABORT_DONE	FIELD32(0x00000010)
+#define INT_MASK_CSR_ENABLE_MITIGATION	FIELD32(0x00000080)
+#define INT_MASK_CSR_MITIGATION_PERIOD	FIELD32(0x0000ff00)
+#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00010000)
+#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00020000)
+#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00040000)
+#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00080000)
+#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00100000)
+#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00200000)
+
+/*
+ * E2PROM_CSR: EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE_93C46: 1: 93c46, 0:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR			0x3470
+#define E2PROM_CSR_RELOAD		FIELD32(0x00000001)
+#define E2PROM_CSR_DATA_CLOCK		FIELD32(0x00000002)
+#define E2PROM_CSR_CHIP_SELECT		FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_IN		FIELD32(0x00000008)
+#define E2PROM_CSR_DATA_OUT		FIELD32(0x00000010)
+#define E2PROM_CSR_TYPE_93C46		FIELD32(0x00000020)
+#define E2PROM_CSR_LOAD_STATUS		FIELD32(0x00000040)
+
+/*
+ * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
+ * AC0_TX_OP: For AC_BK, in unit of 32us.
+ * AC1_TX_OP: For AC_BE, in unit of 32us.
+ */
+#define AC_TXOP_CSR0			0x3474
+#define AC_TXOP_CSR0_AC0_TX_OP		FIELD32(0x0000ffff)
+#define AC_TXOP_CSR0_AC1_TX_OP		FIELD32(0xffff0000)
+
+/*
+ * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
+ * AC2_TX_OP: For AC_VI, in unit of 32us.
+ * AC3_TX_OP: For AC_VO, in unit of 32us.
+ */
+#define AC_TXOP_CSR1			0x3478
+#define AC_TXOP_CSR1_AC2_TX_OP		FIELD32(0x0000ffff)
+#define AC_TXOP_CSR1_AC3_TX_OP		FIELD32(0xffff0000)
+
+/*
+ * DMA_STATUS_CSR
+ */
+#define DMA_STATUS_CSR			0x3480
+
+/*
+ * TEST_MODE_CSR
+ */
+#define TEST_MODE_CSR			0x3484
+
+/*
+ * UART0_TX_CSR
+ */
+#define UART0_TX_CSR			0x3488
+
+/*
+ * UART0_RX_CSR
+ */
+#define UART0_RX_CSR			0x348c
+
+/*
+ * UART0_FRAME_CSR
+ */
+#define UART0_FRAME_CSR			0x3490
+
+/*
+ * UART0_BUFFER_CSR
+ */
+#define UART0_BUFFER_CSR		0x3494
+
+/*
+ * IO_CNTL_CSR
+ */
+#define IO_CNTL_CSR			0x3498
+
+/*
+ * UART_INT_SOURCE_CSR
+ */
+#define UART_INT_SOURCE_CSR		0x34a8
+
+/*
+ * UART_INT_MASK_CSR
+ */
+#define UART_INT_MASK_CSR		0x34ac
+
+/*
+ * PBF_QUEUE_CSR
+ */
+#define PBF_QUEUE_CSR			0x34b0
+
+/*
+ * Firmware DMA registers.
+ * Firmware DMA registers are dedicated for MCU usage
+ * and should not be touched by host driver.
+ * Therefore we skip the definition of these registers.
+ */
+#define FW_TX_BASE_CSR			0x34c0
+#define FW_TX_START_CSR			0x34c4
+#define FW_TX_LAST_CSR			0x34c8
+#define FW_MODE_CNTL_CSR		0x34cc
+#define FW_TXPTR_CSR			0x34d0
+
+/*
+ * 8051 firmware image.
+ */
+#define FIRMWARE_RT2561			"rt2561.bin"
+#define FIRMWARE_RT2561s		"rt2561s.bin"
+#define FIRMWARE_RT2661			"rt2661.bin"
+#define FIRMWARE_IMAGE_BASE		0x4000
+
+/*
+ * RF registers
+ */
+#define RF3_TXPOWER			FIELD32(0x00003e00)
+#define RF4_FREQ_OFFSET			FIELD32(0x0003f000)
+
+/*
+ * EEPROM content.
+ * The wordsize of the EEPROM is 16 bits.
+ */
+
+/*
+ * HW MAC address.
+ */
+#define EEPROM_MAC_ADDR_0		0x0002
+#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR1		0x0004
+#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_2		0x0006
+#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
+
+/*
+ * EEPROM antenna.
+ * ANTENNA_NUM: Number of antenna's.
+ * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
+ * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
+ * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
+ * DYN_TXAGC: Dynamic TX AGC control.
+ * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
+ * RF_TYPE: Rf_type of this adapter.
+ */
+#define EEPROM_ANTENNA			0x0010
+#define EEPROM_ANTENNA_NUM		FIELD16(0x0003)
+#define EEPROM_ANTENNA_TX_DEFAULT	FIELD16(0x000c)
+#define EEPROM_ANTENNA_RX_DEFAULT	FIELD16(0x0030)
+#define EEPROM_ANTENNA_FRAME_TYPE	FIELD16(0x0040)
+#define EEPROM_ANTENNA_DYN_TXAGC	FIELD16(0x0200)
+#define EEPROM_ANTENNA_HARDWARE_RADIO	FIELD16(0x0400)
+#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0xf800)
+
+/*
+ * EEPROM NIC config.
+ * ENABLE_DIVERSITY: 1:enable, 0:disable.
+ * EXTERNAL_LNA_BG: External LNA enable for 2.4G.
+ * CARDBUS_ACCEL: 0:enable, 1:disable.
+ * EXTERNAL_LNA_A: External LNA enable for 5G.
+ */
+#define EEPROM_NIC			0x0011
+#define EEPROM_NIC_ENABLE_DIVERSITY	FIELD16(0x0001)
+#define EEPROM_NIC_TX_DIVERSITY		FIELD16(0x0002)
+#define EEPROM_NIC_TX_RX_FIXED		FIELD16(0x000c)
+#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0010)
+#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0020)
+#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0040)
+
+/*
+ * EEPROM geography.
+ * GEO_A: Default geographical setting for 5GHz band
+ * GEO: Default geographical setting.
+ */
+#define EEPROM_GEOGRAPHY		0x0012
+#define EEPROM_GEOGRAPHY_GEO_A		FIELD16(0x00ff)
+#define EEPROM_GEOGRAPHY_GEO		FIELD16(0xff00)
+
+/*
+ * EEPROM BBP.
+ */
+#define EEPROM_BBP_START		0x0013
+#define EEPROM_BBP_SIZE			16
+#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
+#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
+
+/*
+ * EEPROM TXPOWER 802.11G
+ */
+#define EEPROM_TXPOWER_G_START		0x0023
+#define EEPROM_TXPOWER_G_SIZE		7
+#define EEPROM_TXPOWER_G_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_G_2		FIELD16(0xff00)
+
+/*
+ * EEPROM Frequency
+ */
+#define EEPROM_FREQ			0x002f
+#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
+#define EEPROM_FREQ_SEQ_MASK		FIELD16(0xff00)
+#define EEPROM_FREQ_SEQ			FIELD16(0x0300)
+
+/*
+ * EEPROM LED.
+ * POLARITY_RDY_G: Polarity RDY_G setting.
+ * POLARITY_RDY_A: Polarity RDY_A setting.
+ * POLARITY_ACT: Polarity ACT setting.
+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
+ * LED_MODE: Led mode.
+ */
+#define EEPROM_LED			0x0030
+#define EEPROM_LED_POLARITY_RDY_G	FIELD16(0x0001)
+#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
+#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
+#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
+#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
+#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
+#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
+#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
+#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
+
+/*
+ * EEPROM TXPOWER 802.11A
+ */
+#define EEPROM_TXPOWER_A_START		0x0031
+#define EEPROM_TXPOWER_A_SIZE		12
+#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
+
+/*
+ * BBP content.
+ * The wordsize of the BBP is 8 bits.
+ */
+
+/*
+ * BBP_R2
+ */
+#define BBP_R2_BG_MODE			FIELD8(0x20)
+
+/*
+ * BBP_R3
+ */
+#define BBP_R3_SMART_MODE		FIELD8(0x01)
+
+/*
+ * BBP_R4: RX antenna control
+ * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
+ */
+#define BBP_R4_RX_ANTENNA		FIELD8(0x03)
+#define BBP_R4_RX_FRAME_END		FIELD8(0x10)
+#define BBP_R4_RX_BG_MODE		FIELD8(0x20)
+
+/*
+ * BBP_R77
+ */
+#define BBP_R77_PAIR			FIELD8(0x03)
+
+/*
+ * MCU mailbox commands.
+ */
+#define MCU_SLEEP			0x30
+#define MCU_WAKEUP			0x31
+#define MCU_LED				0x50
+#define MCU_LED_STRENGTH		0x52
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXD_DESC_SIZE			( 16 * sizeof(struct data_desc) )
+#define RXD_DESC_SIZE			( 16 * sizeof(struct data_desc) )
+
+/*
+ * TX descriptor format for TX, PRIO and Beacon Ring.
+ */
+
+/*
+ * Word0
+ * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
+ * KEY_TABLE: Use per-client pairwise KEY table.
+ * KEY_INDEX:
+ * Key index (0~31) to the pairwise KEY table.
+ * 0~3 to shared KEY table 0 (BSS0).
+ * 4~7 to shared KEY table 1 (BSS1).
+ * 8~11 to shared KEY table 2 (BSS2).
+ * 12~15 to shared KEY table 3 (BSS3).
+ * BURST: Next frame belongs to same "burst" event.
+ */
+#define TXD_W0_OWNER_NIC		FIELD32(0x00000001)
+#define TXD_W0_VALID			FIELD32(0x00000002)
+#define TXD_W0_MORE_FRAG		FIELD32(0x00000004)
+#define TXD_W0_ACK			FIELD32(0x00000008)
+#define TXD_W0_TIMESTAMP		FIELD32(0x00000010)
+#define TXD_W0_OFDM			FIELD32(0x00000020)
+#define TXD_W0_IFS			FIELD32(0x00000040)
+#define TXD_W0_RETRY_MODE		FIELD32(0x00000080)
+#define TXD_W0_TKIP_MIC			FIELD32(0x00000100)
+#define TXD_W0_KEY_TABLE		FIELD32(0x00000200)
+#define TXD_W0_KEY_INDEX		FIELD32(0x0000fc00)
+#define TXD_W0_DATABYTE_COUNT		FIELD32(0x0fff0000)
+#define TXD_W0_BURST			FIELD32(0x10000000)
+#define TXD_W0_CIPHER_ALG		FIELD32(0xe0000000)
+
+/*
+ * Word1
+ * HOST_Q_ID: EDCA/HCCA queue ID.
+ * HW_SEQUENCE: MAC overwrites the frame sequence number.
+ * BUFFER_COUNT: Number of buffers in this TXD.
+ */
+#define TXD_W1_HOST_Q_ID		FIELD32(0x0000000f)
+#define TXD_W1_AIFSN			FIELD32(0x000000f0)
+#define TXD_W1_CWMIN			FIELD32(0x00000f00)
+#define TXD_W1_CWMAX			FIELD32(0x0000f000)
+#define TXD_W1_IV_OFFSET		FIELD32(0x003f0000)
+#define TXD_W1_PIGGY_BACK		FIELD32(0x01000000)
+#define TXD_W1_HW_SEQUENCE		FIELD32(0x10000000)
+#define TXD_W1_BUFFER_COUNT		FIELD32(0xe0000000)
+
+/*
+ * Word2: PLCP information
+ */
+#define TXD_W2_PLCP_SIGNAL		FIELD32(0x000000ff)
+#define TXD_W2_PLCP_SERVICE		FIELD32(0x0000ff00)
+#define TXD_W2_PLCP_LENGTH_LOW		FIELD32(0x00ff0000)
+#define TXD_W2_PLCP_LENGTH_HIGH		FIELD32(0xff000000)
+
+/*
+ * Word3
+ */
+#define TXD_W3_IV			FIELD32(0xffffffff)
+
+/*
+ * Word4
+ */
+#define TXD_W4_EIV			FIELD32(0xffffffff)
+
+/*
+ * Word5
+ * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
+ * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler.
+ * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler.
+ * WAITING_DMA_DONE_INT: TXD been filled with data
+ * and waiting for TxDoneISR housekeeping.
+ */
+#define TXD_W5_FRAME_OFFSET		FIELD32(0x000000ff)
+#define TXD_W5_PID_SUBTYPE		FIELD32(0x00001f00)
+#define TXD_W5_PID_TYPE			FIELD32(0x0000e000)
+#define TXD_W5_TX_POWER			FIELD32(0x00ff0000)
+#define TXD_W5_WAITING_DMA_DONE_INT	FIELD32(0x01000000)
+
+/*
+ * the above 24-byte is called TXINFO and will be DMAed to MAC block
+ * through TXFIFO. MAC block use this TXINFO to control the transmission
+ * behavior of this frame.
+ * The following fields are not used by MAC block.
+ * They are used by DMA block and HOST driver only.
+ * Once a frame has been DMA to ASIC, all the following fields are useless
+ * to ASIC.
+ */
+
+/*
+ * Word6-10: Buffer physical address
+ */
+#define TXD_W6_BUFFER_PHYSICAL_ADDRESS	FIELD32(0xffffffff)
+#define TXD_W7_BUFFER_PHYSICAL_ADDRESS	FIELD32(0xffffffff)
+#define TXD_W8_BUFFER_PHYSICAL_ADDRESS	FIELD32(0xffffffff)
+#define TXD_W9_BUFFER_PHYSICAL_ADDRESS	FIELD32(0xffffffff)
+#define TXD_W10_BUFFER_PHYSICAL_ADDRESS	FIELD32(0xffffffff)
+
+/*
+ * Word11-13: Buffer length
+ */
+#define TXD_W11_BUFFER_LENGTH0		FIELD32(0x00000fff)
+#define TXD_W11_BUFFER_LENGTH1		FIELD32(0x0fff0000)
+#define TXD_W12_BUFFER_LENGTH2		FIELD32(0x00000fff)
+#define TXD_W12_BUFFER_LENGTH3		FIELD32(0x0fff0000)
+#define TXD_W13_BUFFER_LENGTH4		FIELD32(0x00000fff)
+
+/*
+ * Word14
+ */
+#define TXD_W14_SK_BUFFER		FIELD32(0xffffffff)
+
+/*
+ * Word15
+ */
+#define TXD_W15_NEXT_SK_BUFFER		FIELD32(0xffffffff)
+
+/*
+ * RX descriptor format for RX Ring.
+ */
+
+/*
+ * Word0
+ * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
+ * KEY_INDEX: Decryption key actually used.
+ */
+#define RXD_W0_OWNER_NIC		FIELD32(0x00000001)
+#define RXD_W0_DROP			FIELD32(0x00000002)
+#define RXD_W0_UNICAST_TO_ME		FIELD32(0x00000004)
+#define RXD_W0_MULTICAST		FIELD32(0x00000008)
+#define RXD_W0_BROADCAST		FIELD32(0x00000010)
+#define RXD_W0_MY_BSS			FIELD32(0x00000020)
+#define RXD_W0_CRC			FIELD32(0x00000040)
+#define RXD_W0_OFDM			FIELD32(0x00000080)
+#define RXD_W0_CIPHER_ERROR		FIELD32(0x00000300)
+#define RXD_W0_KEY_INDEX		FIELD32(0x0000fc00)
+#define RXD_W0_DATABYTE_COUNT		FIELD32(0x0fff0000)
+#define RXD_W0_CIPHER_ALG		FIELD32(0xe0000000)
+
+/*
+ * Word1
+ * SIGNAL: RX raw data rate reported by BBP.
+ * RSSI: RSSI reported by BBP.
+ */
+#define RXD_W1_SIGNAL			FIELD32(0x000000ff)
+#define RXD_W1_RSSI			FIELD32(0x0000ff00)
+#define RXD_W1_FRAME_OFFSET		FIELD32(0x7f000000)
+
+/*
+ * Word2
+ * IV: Received IV of originally encrypted.
+ */
+#define RXD_W2_IV			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * EIV: Received EIV of originally encrypted.
+ */
+#define RXD_W3_EIV			FIELD32(0xffffffff)
+
+/*
+ * Word4
+ */
+#define RXD_W4_RESERVED			FIELD32(0xffffffff)
+
+/*
+ * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
+ * and passed to the HOST driver.
+ * The following fields are for DMA block and HOST usage only.
+ * Can't be touched by ASIC MAC block.
+ */
+
+/*
+ * Word5
+ */
+#define RXD_W5_BUFFER_PHYSICAL_ADDRESS	FIELD32(0xffffffff)
+
+/*
+ * Word6-15: Reserved
+ */
+#define RXD_W6_RESERVED			FIELD32(0xffffffff)
+#define RXD_W7_RESERVED			FIELD32(0xffffffff)
+#define RXD_W8_RESERVED			FIELD32(0xffffffff)
+#define RXD_W9_RESERVED			FIELD32(0xffffffff)
+#define RXD_W10_RESERVED		FIELD32(0xffffffff)
+#define RXD_W11_RESERVED		FIELD32(0xffffffff)
+#define RXD_W12_RESERVED		FIELD32(0xffffffff)
+#define RXD_W13_RESERVED		FIELD32(0xffffffff)
+#define RXD_W14_RESERVED		FIELD32(0xffffffff)
+#define RXD_W15_RESERVED		FIELD32(0xffffffff)
+
+/*
+ * Macro's for converting txpower from EEPROM to dscape value
+ * and from dscape value to register value.
+ */
+#define MIN_TXPOWER	0
+#define MAX_TXPOWER	31
+#define DEFAULT_TXPOWER	24
+
+#define TXPOWER_FROM_DEV(__txpower)		\
+({						\
+	((__txpower) > MAX_TXPOWER) ?		\
+		DEFAULT_TXPOWER : (__txpower);	\
+})
+
+#define TXPOWER_TO_DEV(__txpower)			\
+({							\
+	((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER :	\
+	(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER :	\
+	(__txpower));					\
+})
+
+#endif /* RT61PCI_H */