[ltq-dsl]

* rename lqdsl packages to ltq-dsl
* small rework of packages
* make it work with latest kernel


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25274 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 700 insertions, 0 deletions

diff --git a/package/ltq-dsl/src/ifxmips_mei_interface.h b/package/ltq-dsl/src/ifxmips_mei_interface.h
new file mode 100644
index 0000000000..ffde6113c8
--- /dev/null
+++ b/package/ltq-dsl/src/ifxmips_mei_interface.h
@@ -0,0 +1,700 @@
+/******************************************************************************
+
+                               Copyright (c) 2009
+                            Infineon Technologies AG
+                     Am Campeon 1-12; 81726 Munich, Germany
+
+  For licensing information, see the file 'LICENSE' in the root folder of
+  this software module.
+
+******************************************************************************/
+
+#ifndef IFXMIPS_MEI_H
+#define IFXMIPS_MEI_H
+
+#define CONFIG_DANUBE 1
+
+#if !defined(CONFIG_DANUBE) && !defined(CONFIG_AMAZON_SE) && !defined(CONFIG_AR9) && !defined(CONFIG_VR9)
+#error Platform undefined!!!
+#endif
+
+#ifdef IFX_MEI_BSP
+/** This is the character datatype. */
+typedef char            DSL_char_t;
+/** This is the unsigned 8-bit datatype. */
+typedef unsigned char   DSL_uint8_t;
+/** This is the signed 8-bit datatype. */
+typedef signed char     DSL_int8_t;
+/** This is the unsigned 16-bit datatype. */
+typedef unsigned short  DSL_uint16_t;
+/** This is the signed 16-bit datatype. */
+typedef signed short    DSL_int16_t;
+/** This is the unsigned 32-bit datatype. */
+typedef unsigned long   DSL_uint32_t;
+/** This is the signed 32-bit datatype. */
+typedef signed long     DSL_int32_t;
+/** This is the float datatype. */
+typedef float           DSL_float_t;
+/** This is the void datatype. */
+typedef void            DSL_void_t;
+/** integer type, width is depending on processor arch */
+typedef int             DSL_int_t;
+/** unsigned integer type, width is depending on processor arch */
+typedef unsigned int    DSL_uint_t;
+typedef struct file DSL_DRV_file_t;
+typedef struct inode DSL_DRV_inode_t;
+
+/**
+ *    Defines all possible CMV groups
+ *    */
+typedef enum {
+   DSL_CMV_GROUP_CNTL = 1,
+   DSL_CMV_GROUP_STAT = 2,
+   DSL_CMV_GROUP_INFO = 3,
+   DSL_CMV_GROUP_TEST = 4,
+   DSL_CMV_GROUP_OPTN = 5,
+   DSL_CMV_GROUP_RATE = 6,
+   DSL_CMV_GROUP_PLAM = 7,
+   DSL_CMV_GROUP_CNFG = 8
+} DSL_CmvGroup_t;
+/**
+ *    Defines all opcode types
+ *    */
+typedef enum {
+   H2D_CMV_READ = 0x00,
+   H2D_CMV_WRITE = 0x04,
+   H2D_CMV_INDICATE_REPLY = 0x10,
+   H2D_ERROR_OPCODE_UNKNOWN =0x20,
+   H2D_ERROR_CMV_UNKNOWN =0x30,
+
+   D2H_CMV_READ_REPLY =0x01,
+   D2H_CMV_WRITE_REPLY = 0x05,
+   D2H_CMV_INDICATE = 0x11,
+   D2H_ERROR_OPCODE_UNKNOWN = 0x21,
+   D2H_ERROR_CMV_UNKNOWN = 0x31,
+   D2H_ERROR_CMV_READ_NOT_AVAILABLE = 0x41,
+   D2H_ERROR_CMV_WRITE_ONLY = 0x51,
+   D2H_ERROR_CMV_READ_ONLY = 0x61,
+
+   H2D_DEBUG_READ_DM = 0x02,
+   H2D_DEBUG_READ_PM = 0x06,
+   H2D_DEBUG_WRITE_DM = 0x0a,
+   H2D_DEBUG_WRITE_PM = 0x0e,
+
+   D2H_DEBUG_READ_DM_REPLY = 0x03,
+   D2H_DEBUG_READ_FM_REPLY = 0x07,
+   D2H_DEBUG_WRITE_DM_REPLY = 0x0b,
+   D2H_DEBUG_WRITE_FM_REPLY = 0x0f,
+   D2H_ERROR_ADDR_UNKNOWN = 0x33,
+
+   D2H_AUTONOMOUS_MODEM_READY_MSG = 0xf1
+} DSL_CmvOpcode_t;
+
+/* mutex macros */
+#define MEI_MUTEX_INIT(id,flag) \
+        sema_init(&id,flag)
+#define MEI_MUTEX_LOCK(id) \
+        down_interruptible(&id)
+#define MEI_MUTEX_UNLOCK(id) \
+        up(&id)
+#define MEI_WAIT(ms) \
+        {\
+                set_current_state(TASK_INTERRUPTIBLE);\
+                schedule_timeout(ms);\
+        }
+#define MEI_INIT_WAKELIST(name,queue) \
+        init_waitqueue_head(&queue)
+
+/* wait for an event, timeout is measured in ms */
+#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
+        interruptible_sleep_on_timeout(&ev,timeout * HZ / 1000)
+#define MEI_WAKEUP_EVENT(ev)\
+        wake_up_interruptible(&ev)
+#endif /* IFX_MEI_BSP */
+
+/***	Register address offsets, relative to MEI_SPACE_ADDRESS ***/
+#define ME_DX_DATA				(0x0000)
+#define	ME_VERSION				(0x0004)
+#define	ME_ARC_GP_STAT				(0x0008)
+#define ME_DX_STAT				(0x000C)
+#define	ME_DX_AD				(0x0010)
+#define ME_DX_MWS				(0x0014)
+#define	ME_ME2ARC_INT				(0x0018)
+#define	ME_ARC2ME_STAT				(0x001C)
+#define	ME_ARC2ME_MASK 				(0x0020)
+#define	ME_DBG_WR_AD				(0x0024)
+#define ME_DBG_RD_AD				(0x0028)
+#define	ME_DBG_DATA				(0x002C)
+#define	ME_DBG_DECODE				(0x0030)
+#define ME_CONFIG				(0x0034)
+#define	ME_RST_CTRL				(0x0038)
+#define	ME_DBG_MASTER				(0x003C)
+#define	ME_CLK_CTRL				(0x0040)
+#define	ME_BIST_CTRL				(0x0044)
+#define	ME_BIST_STAT				(0x0048)
+#define ME_XDATA_BASE_SH			(0x004c)
+#define ME_XDATA_BASE				(0x0050)
+#define ME_XMEM_BAR_BASE			(0x0054)
+#define ME_XMEM_BAR0				(0x0054)
+#define ME_XMEM_BAR1				(0x0058)
+#define ME_XMEM_BAR2				(0x005C)
+#define ME_XMEM_BAR3				(0x0060)
+#define ME_XMEM_BAR4				(0x0064)
+#define ME_XMEM_BAR5				(0x0068)
+#define ME_XMEM_BAR6				(0x006C)
+#define ME_XMEM_BAR7				(0x0070)
+#define ME_XMEM_BAR8				(0x0074)
+#define ME_XMEM_BAR9				(0x0078)
+#define ME_XMEM_BAR10				(0x007C)
+#define ME_XMEM_BAR11				(0x0080)
+#define ME_XMEM_BAR12				(0x0084)
+#define ME_XMEM_BAR13				(0x0088)
+#define ME_XMEM_BAR14				(0x008C)
+#define ME_XMEM_BAR15				(0x0090)
+#define ME_XMEM_BAR16				(0x0094)
+
+#define WHILE_DELAY 		20000
+/*
+**	Define where in ME Processor's memory map the Stratify chip lives
+*/
+
+#define MAXSWAPSIZE      	(8 * 1024)	//8k *(32bits)
+
+//      Mailboxes
+#define MSG_LENGTH		16	// x16 bits
+#define YES_REPLY      	 	1
+#define NO_REPLY         	0
+
+#define CMV_TIMEOUT		1000	//jiffies
+
+//  Block size per BAR
+#define SDRAM_SEGMENT_SIZE	(64*1024)
+// Number of Bar registers
+#define MAX_BAR_REGISTERS	(17)
+
+#define XDATA_REGISTER		(15)
+
+// ARC register addresss
+#define ARC_STATUS		0x0
+#define ARC_LP_START		0x2
+#define ARC_LP_END		0x3
+#define ARC_DEBUG		0x5
+#define ARC_INT_MASK		0x10A
+
+#define IRAM0_BASE 		(0x00000)
+#define IRAM1_BASE 		(0x04000)
+#if defined(CONFIG_DANUBE)
+#define BRAM_BASE  		(0x0A000)
+#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
+#define BRAM_BASE               (0x08000)
+#endif
+#define XRAM_BASE		(0x18000)
+#define YRAM_BASE		(0x1A000)
+#define EXT_MEM_BASE		(0x80000)
+#define ARC_GPIO_CTRL		(0xC030)
+#define ARC_GPIO_DATA		(0xC034)
+
+#define IRAM0_SIZE		(16*1024)
+#define IRAM1_SIZE		(16*1024)
+#define BRAM_SIZE		(12*1024)
+#define XRAM_SIZE		(8*1024)
+#define YRAM_SIZE		(8*1024)
+#define EXT_MEM_SIZE		(1536*1024)
+
+#define ADSL_BASE		(0x20000)
+#define CRI_BASE		(ADSL_BASE + 0x11F00)
+#define CRI_CCR0		(CRI_BASE + 0x00)
+#define CRI_RST			(CRI_BASE + 0x04*4)
+#define ADSL_DILV_BASE 		(ADSL_BASE+0x20000)
+
+//
+#define IRAM0_ADDR_BIT_MASK	0xFFF
+#define IRAM1_ADDR_BIT_MASK	0xFFF
+#define BRAM_ADDR_BIT_MASK	0xFFF
+#define RX_DILV_ADDR_BIT_MASK	0x1FFF
+
+/***  Bit definitions ***/
+#define ARC_AUX_HALT		(1 << 25)
+#define ARC_DEBUG_HALT		(1 << 1)
+#define FALSE			0
+#define TRUE			1
+#define BIT0			(1<<0)
+#define BIT1			(1<<1)
+#define BIT2			(1<<2)
+#define BIT3			(1<<3)
+#define BIT4			(1<<4)
+#define BIT5			(1<<5)
+#define BIT6			(1<<6)
+#define BIT7			(1<<7)
+#define BIT8			(1<<8)
+#define BIT9			(1<<9)
+#define BIT10 			(1<<10)
+#define BIT11			(1<<11)
+#define BIT12			(1<<12)
+#define BIT13			(1<<13)
+#define BIT14			(1<<14)
+#define BIT15			(1<<15)
+#define BIT16 			(1<<16)
+#define BIT17			(1<<17)
+#define BIT18			(1<<18)
+#define BIT19			(1<<19)
+#define BIT20			(1<<20)
+#define BIT21			(1<<21)
+#define BIT22			(1<<22)
+#define BIT23			(1<<23)
+#define BIT24			(1<<24)
+#define BIT25			(1<<25)
+#define BIT26			(1<<26)
+#define BIT27			(1<<27)
+#define BIT28			(1<<28)
+#define BIT29			(1<<29)
+#define BIT30			(1<<30)
+#define BIT31			(1<<31)
+
+// CRI_CCR0 Register definitions
+#define CLK_2M_MODE_ENABLE	BIT6
+#define	ACL_CLK_MODE_ENABLE	BIT4
+#define FDF_CLK_MODE_ENABLE	BIT2
+#define STM_CLK_MODE_ENABLE	BIT0
+
+// CRI_RST Register definitions
+#define FDF_SRST		BIT3
+#define MTE_SRST		BIT2
+#define FCI_SRST		BIT1
+#define AAI_SRST		BIT0
+
+//      MEI_TO_ARC_INTERRUPT Register definitions
+#define	MEI_TO_ARC_INT1		BIT3
+#define	MEI_TO_ARC_INT0		BIT2
+#define MEI_TO_ARC_CS_DONE	BIT1	//need to check
+#define	MEI_TO_ARC_MSGAV	BIT0
+
+//      ARC_TO_MEI_INTERRUPT Register definitions
+#define	ARC_TO_MEI_INT1		BIT8
+#define	ARC_TO_MEI_INT0		BIT7
+#define	ARC_TO_MEI_CS_REQ	BIT6
+#define	ARC_TO_MEI_DBG_DONE	BIT5
+#define	ARC_TO_MEI_MSGACK	BIT4
+#define	ARC_TO_MEI_NO_ACCESS	BIT3
+#define	ARC_TO_MEI_CHECK_AAITX	BIT2
+#define	ARC_TO_MEI_CHECK_AAIRX	BIT1
+#define	ARC_TO_MEI_MSGAV	BIT0
+
+//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define	GP_INT1_EN		BIT8
+#define	GP_INT0_EN		BIT7
+#define	CS_REQ_EN		BIT6
+#define	DBG_DONE_EN		BIT5
+#define	MSGACK_EN		BIT4
+#define	NO_ACC_EN		BIT3
+#define	AAITX_EN		BIT2
+#define	AAIRX_EN		BIT1
+#define	MSGAV_EN		BIT0
+
+#define	MEI_SOFT_RESET		BIT0
+
+#define	HOST_MSTR		BIT0
+
+#define JTAG_MASTER_MODE	0x0
+#define MEI_MASTER_MODE		HOST_MSTR
+
+//      MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK	(0x3)
+#define MEI_DEBUG_DEC_AUX_MASK	(0x0)
+#define ME_DBG_DECODE_DMP1_MASK	(0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK	(0x2)
+#define MEI_DEBUG_DEC_CORE_MASK	(0x3)
+
+#define AUX_STATUS		(0x0)
+#define AUX_ARC_GPIO_CTRL	(0x10C)
+#define AUX_ARC_GPIO_DATA	(0x10D)
+//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+//      page swap requests.
+#if defined(CONFIG_DANUBE)
+#define OMBOX_BASE      	0xDF80
+#define	ARC_TO_MEI_MAILBOX	0xDFA0
+#define IMBOX_BASE      	0xDFC0
+#define MEI_TO_ARC_MAILBOX	0xDFD0
+#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
+#define OMBOX_BASE              0xAF80
+#define ARC_TO_MEI_MAILBOX      0xAFA0
+#define IMBOX_BASE              0xAFC0
+#define MEI_TO_ARC_MAILBOX      0xAFD0
+#endif
+
+#define MEI_TO_ARC_MAILBOXR	(MEI_TO_ARC_MAILBOX + 0x2C)
+#define ARC_MEI_MAILBOXR	(ARC_TO_MEI_MAILBOX + 0x2C)
+#define OMBOX1  		(OMBOX_BASE+0x4)
+
+// Codeswap request messages are indicated by setting BIT31
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK	(0x80000000)
+
+// Clear Eoc messages received are indicated by setting BIT17
+#define OMB_CLEAREOC_INTERRUPT_CODE		(0x00020000)
+#define OMB_REBOOT_INTERRUPT_CODE               (1 << 18)
+
+/*
+**	Swap page header
+*/
+//      Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG		(BIT31)
+#define BOOT_FLAG_MASK		~BOOT_FLAG
+
+#define FREE_RELOAD		1
+#define FREE_SHOWTIME		2
+#define FREE_ALL		3
+
+// marcos
+#define	IFX_MEI_WRITE_REGISTER_L(data,addr)	*((volatile u32*)(addr)) = (u32)(data)
+#define IFX_MEI_READ_REGISTER_L(addr) 	(*((volatile u32*)(addr)))
+#define SET_BIT(reg, mask)			reg |= (mask)
+#define CLEAR_BIT(reg, mask)			reg &= (~mask)
+#define CLEAR_BITS(reg, mask)			CLEAR_BIT(reg, mask)
+//#define SET_BITS(reg, mask)			SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val)	{reg &= (~mask); reg |= (val << off);}
+
+#define ALIGN_SIZE				( 1L<<10 )	//1K size align
+#define MEM_ALIGN(addr)				(((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
+
+// swap marco
+#define MEI_HALF_WORD_SWAP(data)		{data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
+#define MEI_BYTE_SWAP(data)			{data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
+
+
+#ifdef CONFIG_PROC_FS
+typedef struct reg_entry
+{
+   int *flag;
+   char name[30];               /* big enough to hold names */
+   char description[100];       /* big enough to hold description */
+   unsigned short low_ino;
+} reg_entry_t;
+#endif
+//      Swap page header describes size in 32-bit words, load location, and image offset
+//      for program and/or data segments
+typedef struct _arc_swp_page_hdr {
+	u32 p_offset;		//Offset bytes of progseg from beginning of image
+	u32 p_dest;		//Destination addr of progseg on processor
+	u32 p_size;		//Size in 32-bitwords of program segment
+	u32 d_offset;		//Offset bytes of dataseg from beginning of image
+	u32 d_dest;		//Destination addr of dataseg on processor
+	u32 d_size;		//Size in 32-bitwords of data segment
+} ARC_SWP_PAGE_HDR;
+
+/*
+**	Swap image header
+*/
+#define GET_PROG	0	//      Flag used for program mem segment
+#define GET_DATA	1	//      Flag used for data mem segment
+
+//      Image header contains size of image, checksum for image, and count of
+//      page headers. Following that are 'count' page headers followed by
+//      the code and/or data segments to be loaded
+typedef struct _arc_img_hdr {
+	u32 size;		//      Size of binary image in bytes
+	u32 checksum;		//      Checksum for image
+	u32 count;		//      Count of swp pages in image
+	ARC_SWP_PAGE_HDR page[1];	//      Should be "count" pages - '1' to make compiler happy
+} ARC_IMG_HDR;
+
+typedef struct smmu_mem_info {
+	int type;
+	int boot;
+	unsigned long nCopy;
+	unsigned long size;
+	unsigned char *address;
+	unsigned char *org_address;
+} smmu_mem_info_t;
+
+#ifdef __KERNEL__
+typedef struct ifx_mei_device_private {
+	int modem_ready;
+	int arcmsgav;
+	int cmv_reply;
+	int cmv_waiting;
+	// Mei to ARC CMV count, reply count, ARC Indicator count
+	int modem_ready_cnt;
+	int cmv_count;
+	int reply_count;
+	unsigned long image_size;
+	int nBar;
+	u16 Recent_indicator[MSG_LENGTH];
+
+	u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
+
+	smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
+	ARC_IMG_HDR *img_hdr;
+	//  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
+	wait_queue_head_t wait_queue_arcmsgav;
+	wait_queue_head_t wait_queue_modemready;
+	struct semaphore mei_cmv_sema;
+} ifx_mei_device_private_t;
+#endif
+typedef struct winhost_message {
+	union {
+		u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
+		u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
+	} msg;
+} DSL_DEV_WinHost_Message_t;
+/********************************************************************************************************
+ * DSL CPE API Driver Stack Interface Definitions
+ * *****************************************************************************************************/
+/** IOCTL codes for bsp driver */
+#define DSL_IOC_MEI_BSP_MAGIC		's'
+
+#define DSL_FIO_BSP_DSL_START		_IO  (DSL_IOC_MEI_BSP_MAGIC, 0)
+#define DSL_FIO_BSP_RUN			_IO  (DSL_IOC_MEI_BSP_MAGIC, 1)
+#define DSL_FIO_BSP_FREE_RESOURCE	_IO  (DSL_IOC_MEI_BSP_MAGIC, 2)
+#define DSL_FIO_BSP_RESET		_IO  (DSL_IOC_MEI_BSP_MAGIC, 3)
+#define DSL_FIO_BSP_REBOOT		_IO  (DSL_IOC_MEI_BSP_MAGIC, 4)
+#define DSL_FIO_BSP_HALT		_IO  (DSL_IOC_MEI_BSP_MAGIC, 5)
+#define DSL_FIO_BSP_BOOTDOWNLOAD	_IO  (DSL_IOC_MEI_BSP_MAGIC, 6)
+#define DSL_FIO_BSP_JTAG_ENABLE		_IO  (DSL_IOC_MEI_BSP_MAGIC, 7)
+#define DSL_FIO_FREE_RESOURCE		_IO  (DSL_IOC_MEI_BSP_MAGIC, 8)
+#define DSL_FIO_ARC_MUX_TEST		_IO  (DSL_IOC_MEI_BSP_MAGIC, 9)
+#define DSL_FIO_BSP_REMOTE		_IOW (DSL_IOC_MEI_BSP_MAGIC, 10, u32)
+#define DSL_FIO_BSP_GET_BASE_ADDRESS	_IOR (DSL_IOC_MEI_BSP_MAGIC, 11, u32)
+#define DSL_FIO_BSP_IS_MODEM_READY	_IOR (DSL_IOC_MEI_BSP_MAGIC, 12, u32)
+#define DSL_FIO_BSP_GET_VERSION		_IOR (DSL_IOC_MEI_BSP_MAGIC, 13, DSL_DEV_Version_t)
+#define DSL_FIO_BSP_CMV_WINHOST		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 14, DSL_DEV_WinHost_Message_t)
+#define DSL_FIO_BSP_CMV_READ		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 15, DSL_DEV_MeiReg_t)
+#define DSL_FIO_BSP_CMV_WRITE		_IOW (DSL_IOC_MEI_BSP_MAGIC, 16, DSL_DEV_MeiReg_t)
+#define DSL_FIO_BSP_DEBUG_READ		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 17, DSL_DEV_MeiDebug_t)
+#define DSL_FIO_BSP_DEBUG_WRITE		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 18, DSL_DEV_MeiDebug_t)
+#define DSL_FIO_BSP_GET_CHIP_INFO	_IOR (DSL_IOC_MEI_BSP_MAGIC, 19, DSL_DEV_HwVersion_t)
+
+#define DSL_DEV_MEIDEBUG_BUFFER_SIZES	512
+
+typedef struct DSL_DEV_MeiDebug
+{
+	DSL_uint32_t iAddress;
+	DSL_uint32_t iCount;
+	DSL_uint32_t buffer[DSL_DEV_MEIDEBUG_BUFFER_SIZES];
+} DSL_DEV_MeiDebug_t;			/* meidebug */
+
+/**
+ *    Structure is used for debug access only.
+ *       Refer to configure option INCLUDE_ADSL_WINHOST_DEBUG */
+typedef struct struct_meireg
+{
+	/*
+	*       Specifies that address for debug access */
+	unsigned long iAddress;
+	/*
+	*       Specifies the pointer to the data that has to be written or returns a
+	*             pointer to the data that has been read out*/
+	unsigned long iData;
+} DSL_DEV_MeiReg_t;					/* meireg */
+
+typedef struct DSL_DEV_Device
+{
+	DSL_int_t nInUse;                /* modem state, update by bsp driver, */
+	DSL_void_t *pPriv;
+	DSL_uint32_t base_address;       /* mei base address */
+	DSL_int_t nIrq[2];                  /* irq number */
+#define IFX_DFEIR		0
+#define IFX_DYING_GASP	1
+	DSL_DEV_MeiDebug_t lop_debugwr;  /* dying gasp */
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0))
+	struct module *owner;
+#endif
+} DSL_DEV_Device_t;			/* ifx_adsl_device_t */
+
+#define DSL_DEV_PRIVATE(dev)  ((ifx_mei_device_private_t*)(dev->pPriv))
+
+typedef struct DSL_DEV_Version		/* ifx_adsl_bsp_version */
+{
+	unsigned long major;
+	unsigned long minor;
+	unsigned long revision;
+} DSL_DEV_Version_t;			/* ifx_adsl_bsp_version_t */
+
+typedef struct DSL_DEV_ChipInfo
+{
+	unsigned long major;
+	unsigned long minor;
+} DSL_DEV_HwVersion_t;
+
+typedef struct
+{
+	DSL_uint8_t dummy;
+} DSL_DEV_DeviceConfig_t;
+
+/** error code definitions */
+typedef enum DSL_DEV_MeiError
+{
+	DSL_DEV_MEI_ERR_SUCCESS = 0,
+	DSL_DEV_MEI_ERR_FAILURE = -1,
+	DSL_DEV_MEI_ERR_MAILBOX_FULL = -2,
+	DSL_DEV_MEI_ERR_MAILBOX_EMPTY = -3,
+	DSL_DEV_MEI_ERR_MAILBOX_TIMEOUT = -4
+} DSL_DEV_MeiError_t;			/* MEI_ERROR */
+
+typedef enum {
+	DSL_BSP_MEMORY_READ=0,
+	DSL_BSP_MEMORY_WRITE,
+} DSL_BSP_MemoryAccessType_t;		/* ifx_adsl_memory_access_type_t */
+
+typedef enum
+{
+	DSL_LED_LINK_ID=0,
+	DSL_LED_DATA_ID
+} DSL_DEV_LedId_t;			/* ifx_adsl_led_id_t */
+
+typedef enum
+{
+	DSL_LED_LINK_TYPE=0,
+	DSL_LED_DATA_TYPE
+} DSL_DEV_LedType_t;			/* ifx_adsl_led_type_t */
+
+typedef enum
+{
+	DSL_LED_HD_CPU=0,
+	DSL_LED_HD_FW
+} DSL_DEV_LedHandler_t;			/* ifx_adsl_led_handler_t */
+
+typedef enum {
+	DSL_LED_ON=0,
+	DSL_LED_OFF,
+	DSL_LED_FLASH,
+} DSL_DEV_LedMode_t;			/* ifx_adsl_led_mode_t */
+
+typedef enum {
+	DSL_CPU_HALT=0,
+	DSL_CPU_RUN,
+	DSL_CPU_RESET,
+} DSL_DEV_CpuMode_t;			/* ifx_adsl_cpu_mode_t */
+
+#if 0
+typedef enum {
+	DSL_BSP_EVENT_DYING_GASP = 0,
+	DSL_BSP_EVENT_CEOC_IRQ,
+} DSL_BSP_Event_id_t;			/* ifx_adsl_event_id_t */
+
+typedef union DSL_BSP_CB_Param
+{
+	DSL_uint32_t nIrqMessage;
+} DSL_BSP_CB_Param_t;			/* ifx_adsl_cbparam_t */
+
+typedef struct DSL_BSP_CB_Event
+{
+	DSL_BSP_Event_id_t nID;
+	DSL_DEV_Device_t *pDev;
+	DSL_BSP_CB_Param_t *pParam;
+} DSL_BSP_CB_Event_t;			/* ifx_adsl_cb_event_t */
+#endif
+
+/* external functions (from the BSP Driver) */
+extern DSL_DEV_Device_t* DSL_BSP_DriverHandleGet(int, int);
+extern DSL_int_t DSL_BSP_DriverHandleDelete(DSL_DEV_Device_t *);
+extern DSL_DEV_MeiError_t DSL_BSP_FWDownload(DSL_DEV_Device_t *, const DSL_char_t *, DSL_uint32_t, DSL_int32_t *, DSL_int32_t *);
+extern int DSL_BSP_KernelIoctls(DSL_DEV_Device_t *, unsigned int, unsigned long);
+extern DSL_DEV_MeiError_t DSL_BSP_SendCMV(DSL_DEV_Device_t *, DSL_uint16_t *, DSL_int_t, DSL_uint16_t *);
+extern DSL_DEV_MeiError_t DSL_BSP_AdslLedInit(DSL_DEV_Device_t *, DSL_DEV_LedId_t, DSL_DEV_LedType_t, DSL_DEV_LedHandler_t);
+extern DSL_DEV_MeiError_t DSL_BSP_Showtime(DSL_DEV_Device_t *, DSL_uint32_t, DSL_uint32_t);
+extern int DSL_BSP_ATMLedCBRegister( int (*ifx_adsl_ledcallback)(void));
+extern DSL_DEV_MeiError_t DSL_BSP_MemoryDebugAccess(DSL_DEV_Device_t *, DSL_BSP_MemoryAccessType_t, DSL_uint32_t, DSL_uint32_t *, DSL_uint32_t);
+extern volatile DSL_DEV_Device_t *adsl_dev;
+
+/**
+ *    Dummy structure by now to show mechanism of extended data that will be
+ *       provided within event callback itself.
+ *       */
+typedef struct
+{
+	/**
+	*    Dummy value */
+	DSL_uint32_t nDummy1;
+} DSL_BSP_CB_Event1DataDummy_t;
+
+/**
+ *    Dummy structure by now to show mechanism of extended data that will be
+ *       provided within event callback itself.
+ *       */
+typedef struct
+{
+	/**
+	*    Dummy value */
+	DSL_uint32_t nDummy2;
+} DSL_BSP_CB_Event2DataDummy_t;
+
+/**
+ *    encapsulate all data structures that are necessary for status event
+ *       callbacks.
+ *       */
+typedef union
+{
+	DSL_BSP_CB_Event1DataDummy_t dataEvent1;
+	DSL_BSP_CB_Event2DataDummy_t dataEvent2;
+} DSL_BSP_CB_DATA_Union_t;
+
+
+typedef enum
+{
+	/**
+	 *    Informs the upper layer driver (DSL CPE API) about a reboot request from the
+	 *       firmware.
+	 *          \note This event does NOT include any additional data.
+	 *                   More detailed information upon reboot reason has to be requested from
+	 *                            upper layer software via CMV (INFO 109) if necessary. */
+	DSL_BSP_CB_FIRST = 0,
+        DSL_BSP_CB_DYING_GASP,
+	DSL_BSP_CB_CEOC_IRQ,
+	DSL_BSP_CB_FIRMWARE_REBOOT,
+	/**
+	 *    Delimiter only */
+	DSL_BSP_CB_LAST
+} DSL_BSP_CB_Type_t;
+
+/**
+ *    Specifies the common event type that has to be used for registering and
+ *       signalling of interrupts/autonomous status events from MEI BSP Driver.
+ *
+ *    \param pDev
+ *    Context pointer from MEI BSP Driver.
+ *
+ *    \param IFX_ADSL_BSP_CallbackType_t
+ *    Specifies the event callback type (reason of callback). Regrading to the
+ *    setting of this value the data which is included in the following union
+ *    might have different meanings.
+ *    Please refer to the description of the union to get information about the
+ *    meaning of the included data.
+ *
+ *    \param pData
+ *    Data according to \ref DSL_BSP_CB_DATA_Union_t.
+ *    If this pointer is NULL there is no additional data available.
+ *
+ *    \return depending on event
+ */
+typedef int (*DSL_BSP_EventCallback_t)
+(
+	DSL_DEV_Device_t *pDev,
+	DSL_BSP_CB_Type_t nCallbackType,
+	DSL_BSP_CB_DATA_Union_t *pData
+);
+
+typedef struct {
+        DSL_BSP_EventCallback_t function;
+        DSL_BSP_CB_Type_t       event;
+        DSL_BSP_CB_DATA_Union_t *pData;
+} DSL_BSP_EventCallBack_t;
+
+extern int DSL_BSP_EventCBRegister(DSL_BSP_EventCallBack_t *);
+extern int DSL_BSP_EventCBUnregister(DSL_BSP_EventCallBack_t *);
+
+/** Modem states */
+#define DSL_DEV_STAT_InitState              0x0000
+#define DSL_DEV_STAT_ReadyState             0x0001
+#define DSL_DEV_STAT_FailState              0x0002
+#define DSL_DEV_STAT_IdleState              0x0003
+#define DSL_DEV_STAT_QuietState             0x0004
+#define DSL_DEV_STAT_GhsState               0x0005
+#define DSL_DEV_STAT_FullInitState          0x0006
+#define DSL_DEV_STAT_ShowTimeState          0x0007
+#define DSL_DEV_STAT_FastRetrainState       0x0008
+#define DSL_DEV_STAT_LoopDiagMode           0x0009
+#define DSL_DEV_STAT_ShortInit              0x000A     /* Bis short initialization */
+
+#define DSL_DEV_STAT_CODESWAP_COMPLETE	    0x0002
+
+#endif //IFXMIPS_MEI_H