packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37007 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 0 insertions, 485 deletions

diff --git a/package/broadcom-wl/files/etc/hotplug.d/net/20-broadcom_wds b/package/broadcom-wl/files/etc/hotplug.d/net/20-broadcom_wds
deleted file mode 100644
index 0a563c2dbd..0000000000
--- a/package/broadcom-wl/files/etc/hotplug.d/net/20-broadcom_wds
+++ /dev/null
@@ -1,61 +0,0 @@
-include /lib/wifi
-
-setup_broadcom_wds() {
-	local iface="$1"
-	local remote="$(wlc ifname "$iface" wdsmac)"
-
-	[ -z "$remote" ] && return
-	
-	config_cb() {
-		[ -z "$CONFIG_SECTION" ] && return
-	
-		config_get type "$CONFIG_SECTION" TYPE
-		[ "$type" = "wifi-iface" ] || return
-		
-		config_get network "$CONFIG_SECTION" network
-		[ -z "$network" ] && return
-		
-		config_get addr "$CONFIG_SECTION" bssid
-		addr=$(echo "$addr" | tr 'A-F' 'a-f')
-		[ "$addr" = "$remote" ] && {
-			local cfg="$CONFIG_SECTION"
-			
-			include /lib/network
-			scan_interfaces
-
-			for network in $network; do
-				setup_interface "$iface" "$network"
-			done
-			
-			config_get encryption "$cfg" encryption
-			config_get key "$cfg" key
-			config_get ssid "$cfg" ssid
-		
-			[ "$encryption" != "none" ] && {
-				sleep 5
-				case "$encryption" in
-					psk|PSK)
-						nas4not "$network" "$iface" up auto tkip psk "$key" "$ssid"
-						;;
-					psk2|PSK2)
-						nas4not "$network" "$iface" up auto aes psk "$key" "$ssid"
-						;;
-					psk+psk2|psk2+psk|PSK+PSK2|PSK2+PSK)
-						nas4not "$network" "$iface" up auto aes+tkip psk "$key" "$ssid"
-						;;
-					*)
-						nas4not lan "$iface" up auto aes "$encryption" "$key" "$ssid"
-						;;
-					esac
-			}
-		}
-	}
-
-	config_load wireless
-}
-
-case "$ACTION" in
-	add|register)
-		[ "${INTERFACE%%0.*}" = wds ] && setup_broadcom_wds "$INTERFACE"
-	;;
-esac
diff --git a/package/broadcom-wl/files/etc/init.d/wlunbind b/package/broadcom-wl/files/etc/init.d/wlunbind
deleted file mode 100755
index 0a29db565f..0000000000
--- a/package/broadcom-wl/files/etc/init.d/wlunbind
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2010-2011 OpenWrt.org
-
-START=09
-
-unbind_driver() {
-	local driver="$1"
-	local sysfs="/sys/bus/pci/drivers/$driver"
-	if [ -d "$sysfs" ]; then
-		local lnk
-		for lnk in $sysfs/*; do
-			[ -h "$lnk" ] || continue
-			case "${lnk##*/}" in
-				*:*:*.*)
-					logger "Unbinding WL PCI device ${lnk##*/} from $driver"
-					echo -n "${lnk##*/}" > "$sysfs/unbind"
-				;;
-			esac
-		done
-	fi
-}
-
-boot() {
-	unbind_driver b43-pci-bridge
-	unbind_driver bcma-pci-bridge
-}
-
-start() { :; }
-stop() { :; }
diff --git a/package/broadcom-wl/files/lib/wifi/broadcom.sh b/package/broadcom-wl/files/lib/wifi/broadcom.sh
deleted file mode 100644
index 72b85aaf88..0000000000
--- a/package/broadcom-wl/files/lib/wifi/broadcom.sh
+++ /dev/null
@@ -1,395 +0,0 @@
-append DRIVERS "broadcom"
-
-scan_broadcom() {
-	local device="$1"
-	local wds
-	local adhoc sta apmode mon disabled
-	local adhoc_if sta_if ap_if mon_if
-	local _c=0
-
-	config_get vifs "$device" vifs
-	for vif in $vifs; do
-		config_get_bool disabled "$vif" disabled 0
-		[ $disabled -eq 0 ] || continue
-
-		config_get mode "$vif" mode
-		_c=$(($_c + 1))
-		case "$mode" in
-			adhoc)
-				adhoc=1
-				adhoc_if="$vif"
-			;;
-			sta)
-				sta=1
-				sta_if="$vif"
-			;;
-			ap)
-				apmode=1
-				ap_if="${ap_if:+$ap_if }$vif"
-			;;
-			wds)
-				config_get addr "$vif" bssid
-				[ -z "$addr" ] || {
-					addr=$(echo "$addr" | tr 'A-F' 'a-f')
-					append wds "$addr"
-				}
-			;;
-			monitor)
-				mon=1
-				mon_if="$vif"
-			;;
-			*) echo "$device($vif): Invalid mode";;
-		esac
-	done
-	config_set "$device" wds "$wds"
-
-	local _c=
-	for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
-		config_set "$vif" ifname "${device}${_c:+.$_c}"
-		_c=$((${_c:-0} + 1))
-	done
-	config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
-
-	ifdown="down"
-	for vif in 0 1 2 3; do
-		append ifdown "vif $vif" "$N"
-		append ifdown "enabled 0" "$N"
-	done
-
-	ap=1
-	infra=1
-	if [ "$_c" -gt 1 ]; then
-		mssid=1
-	else
-		mssid=
-	fi
-	apsta=0
-	radio=1
-	monitor=0
-	case "$adhoc:$sta:$apmode:$mon" in
-		1*)
-			ap=0
-			mssid=
-			infra=0
-		;;
-		:1:1:)
-			apsta=1
-			wet=1
-		;;
-		:1::)
-			wet=1
-			ap=0
-			mssid=
-		;;
-		:::1)
-			wet=1
-			ap=0
-			mssid=
-			monitor=1
-		;;
-		::)
-			radio=0
-		;;
-	esac
-}
-
-disable_broadcom() {
-	local device="$1"
-	set_wifi_down "$device"
-	wlc ifname "$device" down
-	wlc ifname "$device" bssid `wlc ifname "$device" default_bssid`
-	(
-		include /lib/network
-
-		# make sure the interfaces are down and removed from all bridges
-		for dev in $device ${device}.1 ${device}.2 ${device}.3; do
-			ifconfig "$dev" down 2>/dev/null >/dev/null && {
-				unbridge "$dev"
-			}
-		done
-	)
-	true
-}
-
-enable_broadcom() {
-	local device="$1"
-	local _c
-	config_get channel "$device" channel
-	config_get country "$device" country
-	config_get maxassoc "$device" maxassoc
-	config_get wds "$device" wds
-	config_get vifs "$device" vifs
-	config_get distance "$device" distance
-	config_get slottime "$device" slottime
-	config_get rxantenna "$device" rxantenna
-	config_get txantenna "$device" txantenna
-	config_get_bool frameburst "$device" frameburst
-	config_get macfilter "$device" macfilter
-	config_get maclist "$device" maclist
-	config_get macaddr "$device" macaddr
-	config_get txpower "$device" txpower
-	config_get frag "$device" frag
-	config_get rts "$device" rts
-	config_get hwmode "$device" hwmode
-	local vif_pre_up vif_post_up vif_do_up vif_txpower
-	local doth=0
-	local wmm=1
-
-	_c=0
-	nas="$(which nas)"
-	nas_cmd=
-	if_up=
-
-	[ -z "$slottime" ] && {
-		[ -n "$distance" ] && {
-			# slottime = 9 + (distance / 150) + (distance % 150 ? 1 : 0)
-			slottime="$((9 + ($distance / 150) + 1 - (150 - ($distance % 150)) / 150 ))"
-		}
-	} || {
-		slottime="${slottime:--1}"
-	}
-
-	case "$macfilter" in
-		allow|2)
-			macfilter=2;
-		;;
-		deny|1)
-			macfilter=1;
-		;;
-		disable|none|0)
-			macfilter=0;
-		;;
-	esac
-
-	case "$hwmode" in
-		*b)   hwmode=0;;
-		*bg)  hwmode=1;;
-		*g)   hwmode=2;;
-		*gst) hwmode=4;;
-		*lrs) hwmode=5;;
-		*)    hwmode=1;;
-	esac
-
-	for vif in $vifs; do
-		config_get vif_txpower "$vif" txpower
-
-		config_get mode "$vif" mode
-		append vif_pre_up "vif $_c" "$N"
-		append vif_post_up "vif $_c" "$N"
-		append vif_do_up "vif $_c" "$N"
-
-		config_get_bool wmm "$vif" wmm "$wmm"
-		config_get_bool doth "$vif" doth "$doth"
-
-		[ "$mode" = "sta" ] || {
-			config_get_bool hidden "$vif" hidden 0
-			append vif_pre_up "closed $hidden" "$N"
-			config_get_bool isolate "$vif" isolate 0
-			append vif_pre_up "ap_isolate $isolate" "$N"
-		}
-
-		wsec_r=0
-		eap_r=0
-		wsec=0
-		auth=0
-		nasopts=
-		config_get enc "$vif" encryption
-		case "$enc" in
-			*wep*)
-				wsec_r=1
-				wsec=1
-				defkey=1
-				config_get key "$vif" key
-				case "$enc" in
-					*shared*) append vif_do_up "wepauth 1" "$N";;
-					*) append vif_do_up "wepauth 0" "$N";;
-				esac
-				case "$key" in
-					[1234])
-						defkey="$key"
-						for knr in 1 2 3 4; do
-							config_get k "$vif" key$knr
-							[ -n "$k" ] || continue
-							[ "$defkey" = "$knr" ] && def="=" || def=""
-							append vif_do_up "wepkey $def$knr,$k" "$N"
-						done
-					;;
-					"");;
-					*) append vif_do_up "wepkey =1,$key" "$N";;
-				esac
-			;;
-			*psk*)
-				wsec_r=1
-				config_get key "$vif" key
-
-				# psk version + default cipher
-				case "$enc" in
-					*mixed*|*psk+psk2*) auth=132; wsec=6;;
-					*psk2*) auth=128; wsec=4;;
-					*) auth=4; wsec=2;;
-				esac
-
-				# cipher override
-				case "$enc" in
-					*tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
-					*aes*|*ccmp*) wsec=4;;
-					*tkip*) wsec=2;;
-				esac
-
-				# group rekey interval
-				config_get rekey "$vif" wpa_group_rekey
-
-				eval "${vif}_key=\"\$key\""
-				nasopts="-k \"\$${vif}_key\"${rekey:+ -g $rekey}"
-			;;
-			*wpa*)
-				wsec_r=1
-				eap_r=1
-				config_get auth_server "$vif" auth_server
-				[ -z "$auth_server" ] && config_get auth_server "$vif" server
-				config_get auth_port "$vif" auth_port
-				[ -z "$auth_port" ] && config_get auth_port "$vif" port
-				config_get auth_secret "$vif" auth_secret
-				[ -z "$auth_secret" ] && config_get auth_secret "$vif" key
-
-				# wpa version + default cipher
-				case "$enc" in
-					*mixed*|*wpa+wpa2*) auth=66; wsec=6;;
-					*wpa2*) auth=64; wsec=4;;
-					*) auth=2; wsec=2;;
-				esac
-
-				# cipher override
-				case "$enc" in
-					*tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
-					*aes*|*ccmp*) wsec=4;;
-					*tkip*) wsec=2;;
-				esac
-
-				# group rekey interval
-				config_get rekey "$vif" wpa_group_rekey
-
-				eval "${vif}_key=\"\$auth_secret\""
-				nasopts="-r \"\$${vif}_key\" -h $auth_server -p ${auth_port:-1812}${rekey:+ -g $rekey}"
-			;;
-		esac
-		append vif_do_up "wsec $wsec" "$N"
-		append vif_do_up "wpa_auth $auth" "$N"
-		append vif_do_up "wsec_restrict $wsec_r" "$N"
-		append vif_do_up "eap_restrict $eap_r" "$N"
-
-		config_get ssid "$vif" ssid
-		append vif_post_up "vlan_mode 0" "$N"
-		append vif_post_up "ssid $ssid" "$N"
-		append vif_do_up "ssid $ssid" "$N"
-
-		[ "$mode" = "monitor" ] && {
-			append vif_post_up "monitor $monitor" "$N"
-		}
-
-		[ "$mode" = "adhoc" ] && {
-			config_get bssid "$vif" bssid
-			[ -n "$bssid" ] && {
-				append vif_pre_up "bssid $bssid" "$N"
-				append vif_pre_up "ibss_merge 0" "$N"
-			} || {
-				append vif_pre_up "ibss_merge 1" "$N"
-			}
-		}
-
-		append vif_post_up "enabled 1" "$N"
-
-		config_get ifname "$vif" ifname
-		#append if_up "ifconfig $ifname up" ";$N"
-
-		local net_cfg
-		net_cfg="$(find_net_config "$vif")"
-		[ -z "$net_cfg" ] || {
-			append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
-			append if_up "start_net '$ifname' '$net_cfg'" ";$N"
-		}
-		[ -z "$nasopts" ] || {
-			eval "${vif}_ssid=\"\$ssid\""
-			nas_mode="-A"
-			[ "$mode" = "sta" ] && nas_mode="-S"
-			[ -z "$nas" ] || {
-				nas_cmd="${nas_cmd:+$nas_cmd$N}start-stop-daemon -S -b -p /var/run/nas.$ifname.pid -x $nas -- -P /var/run/nas.$ifname.pid -H 34954 -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 -F $nasopts"
-			}
-		}
-		_c=$(($_c + 1))
-	done
-	killall -KILL nas >&- 2>&-
-	wlc ifname "$device" stdin <<EOF
-$ifdown
-
-gmode ${hwmode:-1}
-apsta $apsta
-ap $ap
-${mssid:+mssid $mssid}
-infra $infra
-${wet:+wet 1}
-802.11d 0
-802.11h ${doth:-0}
-wme ${wmm:-1}
-rxant ${rxantenna:-3}
-txant ${txantenna:-3}
-fragthresh ${frag:-2346}
-rtsthresh ${rts:-2347}
-monitor ${monitor:-0}
-
-radio ${radio:-1}
-macfilter ${macfilter:-0}
-maclist ${maclist:-none}
-wds none
-${wds:+wds $wds}
-country ${country:-US}
-${channel:+channel $channel}
-maxassoc ${maxassoc:-128}
-slottime ${slottime:--1}
-${frameburst:+frameburst $frameburst}
-
-$vif_pre_up
-up
-$vif_post_up
-EOF
-	eval "$if_up"
-	wlc ifname "$device" stdin <<EOF
-$vif_do_up
-EOF
-
-	# use vif_txpower (from last wifi-iface) instead of txpower (from
-	# wifi-device) if the latter does not exist
-	txpower=${txpower:-$vif_txpower}
-	[ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
-
-	eval "$nas_cmd"
-}
-
-
-detect_broadcom() {
-	local i=-1
-
-	while grep -qs "^ *wl$((++i)):" /proc/net/dev; do
-		local channel
-
-		config_get type wl${i} type
-		[ "$type" = broadcom ] && continue
-		channel=`wlc ifname wl${i} channel`
-		cat <<EOF
-config wifi-device  wl${i}
-	option type     broadcom
-	option channel  ${channel:-11}
-
-	# REMOVE THIS LINE TO ENABLE WIFI:
-	option disabled 1
-
-config wifi-iface
-	option device   wl${i}
-	option network	lan
-	option mode     ap
-	option ssid     OpenWrt${i#0}
-	option encryption none
-
-EOF
-	done
-}