(6/6) bcm57xx: package

This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11471 3c298f89-4303-0410-b956-a3cf2f4a3e73

16 files changed, 2806 insertions, 0 deletions

diff --git a/package/broadcom-57xx/src/proto/802.11.h b/package/broadcom-57xx/src/proto/802.11.h
new file mode 100644
index 0000000000..ebabf730a3
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/802.11.h
@@ -0,0 +1,1387 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Fundamental types and constants relating to 802.11
+ *
+ * $Id: 802.11.h,v 1.1.1.25 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _802_11_H_
+#define _802_11_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+#ifndef _NET_ETHERNET_H_
+#include <proto/ethernet.h>
+#endif
+
+#include <proto/wpa.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#define DOT11_TU_TO_US			1024	/* 802.11 Time Unit is 1024 microseconds */
+
+/* Generic 802.11 frame constants */
+#define DOT11_A3_HDR_LEN		24	/* d11 header length with A3 */
+#define DOT11_A4_HDR_LEN		30	/* d11 header length with A4 */
+#define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN	/* MAC header length */
+#define DOT11_FCS_LEN			4	/* d11 FCS length */
+#define DOT11_ICV_LEN			4	/* d11 ICV length */
+#define DOT11_ICV_AES_LEN		8	/* d11 ICV/AES length */
+#define DOT11_QOS_LEN			2	/* d11 QoS length */
+#define DOT11_HTC_LEN			4	/* d11 HT Control field length */
+
+#define DOT11_KEY_INDEX_SHIFT		6	/* d11 key index shift */
+#define DOT11_IV_LEN			4	/* d11 IV length */
+#define DOT11_IV_TKIP_LEN		8	/* d11 IV TKIP length */
+#define DOT11_IV_AES_OCB_LEN		4	/* d11 IV/AES/OCB length */
+#define DOT11_IV_AES_CCM_LEN		8	/* d11 IV/AES/CCM length */
+#define DOT11_IV_MAX_LEN		8	/* maximum iv len for any encryption */
+
+/* Includes MIC */
+#define DOT11_MAX_MPDU_BODY_LEN		2304	/* max MPDU body length */
+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
+#define DOT11_MAX_MPDU_LEN		(DOT11_A4_HDR_LEN + \
+					 DOT11_QOS_LEN + \
+					 DOT11_IV_AES_CCM_LEN + \
+					 DOT11_MAX_MPDU_BODY_LEN + \
+					 DOT11_ICV_LEN + \
+					 DOT11_FCS_LEN)	/* d11 max MPDU length */
+
+#define DOT11_MAX_SSID_LEN		32	/* d11 max ssid length */
+
+/* dot11RTSThreshold */
+#define DOT11_DEFAULT_RTS_LEN		2347	/* d11 default RTS length */
+#define DOT11_MAX_RTS_LEN		2347	/* d11 max RTS length */
+
+/* dot11FragmentationThreshold */
+#define DOT11_MIN_FRAG_LEN		256	/* d11 min fragmentation length */
+#define DOT11_MAX_FRAG_LEN		2346	/* Max frag is also limited by aMPDUMaxLength
+						* of the attached PHY
+						*/
+#define DOT11_DEFAULT_FRAG_LEN		2346	/* d11 default fragmentation length */
+
+/* dot11BeaconPeriod */
+#define DOT11_MIN_BEACON_PERIOD		1	/* d11 min beacon period */
+#define DOT11_MAX_BEACON_PERIOD		0xFFFF	/* d11 max beacon period */
+
+/* dot11DTIMPeriod */
+#define DOT11_MIN_DTIM_PERIOD		1	/* d11 min DTIM period */
+#define DOT11_MAX_DTIM_PERIOD		0xFF	/* d11 max DTIM period */
+
+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
+#define DOT11_LLC_SNAP_HDR_LEN		8	/* d11 LLC/SNAP header length */
+#define DOT11_OUI_LEN			3	/* d11 OUI length */
+struct dot11_llc_snap_header {
+	uint8	dsap;				/* always 0xAA */
+	uint8	ssap;				/* always 0xAA */
+	uint8	ctl;				/* always 0x03 */
+	uint8	oui[DOT11_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
+						 * Bridge-Tunnel: 0x00 0x00 0xF8
+						 */
+	uint16	type;				/* ethertype */
+} PACKED;
+
+/* RFC1042 header used by 802.11 per 802.1H */
+#define RFC1042_HDR_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)	/* RCF1042 header length */
+
+/* Generic 802.11 MAC header */
+/*
+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
+ *		 The fields are defined such that the shorter 1, 2, and 3
+ *		 address headers just use the first k fields.
+ */
+struct dot11_header {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	a1;		/* address 1 */
+	struct ether_addr	a2;		/* address 2 */
+	struct ether_addr	a3;		/* address 3 */
+	uint16			seq;		/* sequence control */
+	struct ether_addr	a4;		/* address 4 */
+} PACKED;
+
+/* Control frames */
+
+struct dot11_rts_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	ta;		/* transmitter address */
+} PACKED;
+#define	DOT11_RTS_LEN		16		/* d11 RTS frame length */
+
+struct dot11_cts_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+} PACKED;
+#define	DOT11_CTS_LEN		10		/* d11 CTS frame length */
+
+struct dot11_ack_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+} PACKED;
+#define	DOT11_ACK_LEN		10		/* d11 ACK frame length */
+
+struct dot11_ps_poll_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* AID */
+	struct ether_addr	bssid;		/* receiver address, STA in AP */
+	struct ether_addr	ta;		/* transmitter address */
+} PACKED;
+#define	DOT11_PS_POLL_LEN	16		/* d11 PS poll frame length */
+
+struct dot11_cf_end_frame {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	bssid;		/* transmitter address, STA in AP */
+} PACKED;
+#define	DOT11_CS_END_LEN	16		/* d11 CF-END frame length */
+
+/* BA/BAR Control parameters */
+#define DOT11_BA_CTL_POLICY_NORMAL	0x0000	/* normal ack */
+#define DOT11_BA_CTL_POLICY_NOACK	0x0001	/* no ack */
+#define DOT11_BA_CTL_POLICY_MASK	0x0001	/* ack policy mask */
+
+#define DOT11_BA_CTL_MTID		0x0002	/* multi tid BA */
+#define DOT11_BA_CTL_COMPRESSED		0x0004	/* compressed bitmap */
+
+#define DOT11_BA_CTL_NUMMSDU_MASK	0x0FC0	/* num msdu in bitmap mask */
+#define DOT11_BA_CTL_NUMMSDU_SHIFT	6	/* num msdu in bitmap shift */
+
+#define DOT11_BA_CTL_TID_MASK		0xF000	/* tid mask */
+#define DOT11_BA_CTL_TID_SHIFT		12	/* tid shift */
+
+/* control frame header (BA/BAR) */
+struct dot11_ctl_header {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	ra;		/* receiver address */
+	struct ether_addr	ta;		/* transmitter address */
+} PACKED;
+#define DOT11_CTL_HDR_LEN	16		/* control frame hdr len */
+
+/* BAR frame payload */
+struct dot11_bar {
+	uint16			bar_control;	/* BAR Control */
+	uint16			seqnum;		/* Starting Sequence control */
+} PACKED;
+#define DOT11_BAR_LEN		4		/* BAR frame payload length */
+
+#define DOT11_BA_BITMAP_LEN	128		/* bitmap length */
+#define DOT11_BA_CMP_BITMAP_LEN	8		/* compressed bitmap length */
+/* BA frame payload */
+struct dot11_ba {
+	uint16			ba_control;	/* BA Control */
+	uint16			seqnum;		/* Starting Sequence control */
+	uint8			bitmap[DOT11_BA_BITMAP_LEN];	/* Block Ack Bitmap */
+} PACKED;
+#define DOT11_BA_LEN		4		/* BA frame payload len (wo bitmap) */
+
+/* Management frame header */
+struct dot11_management_header {
+	uint16			fc;		/* frame control */
+	uint16			durid;		/* duration/ID */
+	struct ether_addr	da;		/* receiver address */
+	struct ether_addr	sa;		/* transmitter address */
+	struct ether_addr	bssid;		/* BSS ID */
+	uint16			seq;		/* sequence control */
+} PACKED;
+#define	DOT11_MGMT_HDR_LEN	24		/* d11 management header length */
+
+/* Management frame payloads */
+
+struct dot11_bcn_prb {
+	uint32			timestamp[2];
+	uint16			beacon_interval;
+	uint16			capability;
+} PACKED;
+#define	DOT11_BCN_PRB_LEN	12		/* 802.11 beacon/probe frame fixed length */
+
+struct dot11_auth {
+	uint16			alg;		/* algorithm */
+	uint16			seq;		/* sequence control */
+	uint16			status;		/* status code */
+} PACKED;
+#define DOT11_AUTH_FIXED_LEN	6		/* length of auth frame without challenge info
+						 * elt
+						 */
+
+struct dot11_assoc_req {
+	uint16			capability;	/* capability information */
+	uint16			listen;		/* listen interval */
+} PACKED;
+#define DOT11_ASSOC_REQ_FIXED_LEN	4	/* length of assoc frame without info elts */
+
+struct dot11_reassoc_req {
+	uint16			capability;	/* capability information */
+	uint16			listen;		/* listen interval */
+	struct ether_addr	ap;		/* Current AP address */
+} PACKED;
+#define DOT11_REASSOC_REQ_FIXED_LEN	10	/* length of assoc frame without info elts */
+
+struct dot11_assoc_resp {
+	uint16			capability;	/* capability information */
+	uint16			status;		/* status code */
+	uint16			aid;		/* association ID */
+} PACKED;
+
+struct dot11_action_measure {
+	uint8	category;
+	uint8	action;
+	uint8	token;
+	uint8	data[1];
+} PACKED;
+#define DOT11_ACTION_MEASURE_LEN	3	/* d11 action measurement header length */
+
+struct dot11_action_ht_ch_width {
+	uint8	category;
+	uint8	action;
+	uint8	ch_width;
+} PACKED;
+
+struct dot11_action_ht_mimops {
+	uint8	category;
+	uint8	action;
+	uint8	control;
+} PACKED;
+
+#define SM_PWRSAVE_ENABLE	1
+#define SM_PWRSAVE_MODE		2
+
+struct dot11_action_ht_info_xchg {
+	uint8	category;
+	uint8	action;
+	uint8	info;
+} PACKED;
+
+#define	DOT11_HT_INFO_XCHG_INFO_REQ		0x01
+#define	DOT11_HT_INFO_XCHG_40MHZ_INTOLERANT	0x02
+#define	DOT11_HT_INFO_XCHG_STA_CHAN_WIDTH	0x04
+
+
+/* ************* 802.11h related definitions. ************* */
+struct dot11_power_cnst {
+	uint8 id;
+	uint8 len;
+	uint8 power;
+} PACKED;
+typedef struct dot11_power_cnst dot11_power_cnst_t;
+
+struct dot11_power_cap {
+	uint8 min;
+	uint8 max;
+} PACKED;
+typedef struct dot11_power_cap dot11_power_cap_t;
+
+struct dot11_tpc_rep {
+	uint8 id;
+	uint8 len;
+	uint8 tx_pwr;
+	uint8 margin;
+} PACKED;
+typedef struct dot11_tpc_rep dot11_tpc_rep_t;
+#define DOT11_MNG_IE_TPC_REPORT_LEN	2 	/* length of IE data, not including 2 byte header */
+
+struct dot11_supp_channels {
+	uint8 id;
+	uint8 len;
+	uint8 first_channel;
+	uint8 num_channels;
+} PACKED;
+typedef struct dot11_supp_channels dot11_supp_channels_t;
+
+/* Extension Channel Offset IE: 802.11n-D1.0 spec. added sideband
+ * offset for 40MHz operation.  The possible 3 values are:
+ * 1 = above control channel
+ * 3 = below control channel
+ * 0 = no extension channel
+ */
+struct dot11_extch {
+	uint8	id;		/* IE ID, 62, DOT11_MNG_EXT_CHANNEL_OFFSET */
+	uint8	len;		/* IE length */
+	uint8	extch;
+} PACKED;
+typedef struct dot11_extch dot11_extch_ie_t;
+
+struct dot11_brcm_extch {
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];		/* Proprietary OUI, BRCM_OUI */
+	uint8	type;           /* type inidicates what follows */
+	uint8	extch;
+} PACKED;
+typedef struct dot11_brcm_extch dot11_brcm_extch_ie_t;
+
+#define BRCM_EXTCH_IE_LEN	5
+#define BRCM_EXTCH_IE_TYPE	53	/* 802.11n ID not yet assigned */
+#define DOT11_EXTCH_IE_LEN	1
+#define DOT11_EXT_CH_MASK	0x03	/* extension channel mask */
+#define DOT11_EXT_CH_UPPER	0x01	/* ext. ch. on upper sb */
+#define DOT11_EXT_CH_LOWER	0x03	/* ext. ch. on lower sb */
+#define DOT11_EXT_CH_NONE	0x00	/* no extension ch.  */
+
+struct dot11_action_frmhdr {
+	uint8	category;
+	uint8	action;
+	uint8	data[1];
+} PACKED;
+
+/* CSA IE data structure */
+struct dot11_channel_switch {
+	uint8 id;	/* id DOT11_MNG_CHANNEL_SWITCH_ID */
+	uint8 len;	/* length of IE */
+	uint8 mode;	/* mode 0 or 1 */
+	uint8 channel;	/* channel switch to */
+	uint8 count;	/* number of beacons before switching */
+} PACKED;
+typedef struct dot11_channel_switch dot11_chan_switch_ie_t;
+
+#define DOT11_SWITCH_IE_LEN	3	/* length of IE data, not including 2 byte header */
+/* CSA mode - 802.11h-2003 $7.3.2.20 */
+#define DOT11_CSA_MODE_ADVISORY		0	/* no DOT11_CSA_MODE_NO_TX restriction imposed */
+#define DOT11_CSA_MODE_NO_TX		1	/* no transmission upon receiving CSA frame. */
+
+struct dot11_action_switch_channel {
+	uint8	category;
+	uint8	action;
+	dot11_chan_switch_ie_t chan_switch_ie;	/* for switch IE */
+	dot11_brcm_extch_ie_t extch_ie;		/* extension channel offset */
+} PACKED;
+
+/* 11n Extended Channel Switch IE data structure */
+struct dot11_ext_csa {
+	uint8 id;	/* id DOT11_MNG_EXT_CHANNEL_SWITCH_ID */
+	uint8 len;	/* length of IE */
+	uint8 mode;	/* mode 0 or 1 */
+	uint8 reg;	/* regulatory class */
+	uint8 channel;	/* channel switch to */
+	uint8 count;	/* number of beacons before switching */
+} PACKED;
+typedef struct dot11_ext_csa dot11_ext_csa_ie_t;
+#define DOT11_EXT_CSA_IE_LEN	4	/* length of extended channel switch IE body */
+
+struct dot11_action_ext_csa {
+	uint8	category;
+	uint8	action;
+	dot11_ext_csa_ie_t chan_switch_ie;	/* for switch IE */
+} PACKED;
+
+/* 802.11h Measurement Request/Report IEs */
+/* Measurement Type field */
+#define DOT11_MEASURE_TYPE_BASIC 	0	/* d11 measurement basic type */
+#define DOT11_MEASURE_TYPE_CCA 		1	/* d11 measurement CCA type */
+#define DOT11_MEASURE_TYPE_RPI		2	/* d11 measurement PRI type */
+
+/* Measurement Request Modes */
+#define DOT11_MEASURE_MODE_ENABLE 	(1<<1)	/* d11 measurement enable */
+#define DOT11_MEASURE_MODE_REQUEST	(1<<2)	/* d11 measurement request */
+#define DOT11_MEASURE_MODE_REPORT 	(1<<3)	/* d11 measurement report */
+/* Measurement Report Modes */
+#define DOT11_MEASURE_MODE_LATE 	(1<<0)	/* d11 measurement late */
+#define DOT11_MEASURE_MODE_INCAPABLE	(1<<1)	/* d11 measurement incapable */
+#define DOT11_MEASURE_MODE_REFUSED	(1<<2)	/* d11 measurement refuse */
+/* Basic Measurement Map bits */
+#define DOT11_MEASURE_BASIC_MAP_BSS	((uint8)(1<<0))	/* d11 measurement basic map BSS */
+#define DOT11_MEASURE_BASIC_MAP_OFDM	((uint8)(1<<1))	/* d11 measurement map OFDM */
+#define DOT11_MEASURE_BASIC_MAP_UKNOWN	((uint8)(1<<2))	/* d11 measurement map unknown */
+#define DOT11_MEASURE_BASIC_MAP_RADAR	((uint8)(1<<3))	/* d11 measurement map radar */
+#define DOT11_MEASURE_BASIC_MAP_UNMEAS	((uint8)(1<<4))	/* d11 measurement map unmeasuremnt */
+
+struct dot11_meas_req {
+	uint8 id;
+	uint8 len;
+	uint8 token;
+	uint8 mode;
+	uint8 type;
+	uint8 channel;
+	uint8 start_time[8];
+	uint16 duration;
+} PACKED;
+typedef struct dot11_meas_req dot11_meas_req_t;
+#define DOT11_MNG_IE_MREQ_LEN 14	/* d11 measurement request IE length */
+/* length of Measure Request IE data not including variable len */
+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3	/* d11 measurement request IE fixed length */
+
+struct dot11_meas_rep {
+	uint8 id;
+	uint8 len;
+	uint8 token;
+	uint8 mode;
+	uint8 type;
+	union
+	{
+		struct {
+			uint8 channel;
+			uint8 start_time[8];
+			uint16 duration;
+			uint8 map;
+		} PACKED basic;
+		uint8 data[1];
+	} PACKED rep;
+} PACKED;
+typedef struct dot11_meas_rep dot11_meas_rep_t;
+
+/* length of Measure Report IE data not including variable len */
+#define DOT11_MNG_IE_MREP_FIXED_LEN	3	/* d11 measurement response IE fixed length */
+
+struct dot11_meas_rep_basic {
+	uint8 channel;
+	uint8 start_time[8];
+	uint16 duration;
+	uint8 map;
+} PACKED;
+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
+#define DOT11_MEASURE_BASIC_REP_LEN	12	/* d11 measurement basic report length */
+
+struct dot11_quiet {
+	uint8 id;
+	uint8 len;
+	uint8 count;	/* TBTTs until beacon interval in quiet starts */
+	uint8 period;	/* Beacon intervals between periodic quiet periods ? */
+	uint16 duration;	/* Length of quiet period, in TU's */
+	uint16 offset;	/* TU's offset from TBTT in Count field */
+} PACKED;
+typedef struct dot11_quiet dot11_quiet_t;
+
+struct chan_map_tuple {
+	uint8 channel;
+	uint8 map;
+} PACKED;
+typedef struct chan_map_tuple chan_map_tuple_t;
+
+struct dot11_ibss_dfs {
+	uint8 id;
+	uint8 len;
+	uint8 eaddr[ETHER_ADDR_LEN];
+	uint8 interval;
+	chan_map_tuple_t map[1];
+} PACKED;
+typedef struct dot11_ibss_dfs dot11_ibss_dfs_t;
+
+/* WME Elements */
+#define WME_OUI			"\x00\x50\xf2"	/* WME OUI */
+#define WME_VER			1	/* WME version */
+#define WME_TYPE		2	/* WME type */
+#define WME_SUBTYPE_IE		0	/* Information Element */
+#define WME_SUBTYPE_PARAM_IE	1	/* Parameter Element */
+#define WME_SUBTYPE_TSPEC	2	/* Traffic Specification */
+
+/* WME Access Category Indices (ACIs) */
+#define AC_BE			0	/* Best Effort */
+#define AC_BK			1	/* Background */
+#define AC_VI			2	/* Video */
+#define AC_VO			3	/* Voice */
+#define AC_COUNT		4	/* number of ACs */
+
+typedef uint8 ac_bitmap_t;	/* AC bitmap of (1 << AC_xx) */
+
+#define AC_BITMAP_NONE		0x0	/* No ACs */
+#define AC_BITMAP_ALL		0xf	/* All ACs */
+#define AC_BITMAP_TST(ab, ac)	(((ab) & (1 << (ac))) != 0)
+
+/* WME Information Element (IE) */
+struct wme_ie {
+	uint8 oui[3];
+	uint8 type;
+	uint8 subtype;
+	uint8 version;
+	uint8 qosinfo;
+} PACKED;
+typedef struct wme_ie wme_ie_t;
+#define WME_IE_LEN 7	/* WME IE length */
+
+struct edcf_acparam {
+	uint8	ACI;
+	uint8	ECW;
+	uint16  TXOP;		/* stored in network order (ls octet first) */
+} PACKED;
+typedef struct edcf_acparam edcf_acparam_t;
+
+/* WME Parameter Element (PE) */
+struct wme_param_ie {
+	uint8 oui[3];
+	uint8 type;
+	uint8 subtype;
+	uint8 version;
+	uint8 qosinfo;
+	uint8 rsvd;
+	edcf_acparam_t acparam[AC_COUNT];
+} PACKED;
+typedef struct wme_param_ie wme_param_ie_t;
+#define WME_PARAM_IE_LEN            24          /* WME Parameter IE length */
+
+/* QoS Info field for IE as sent from AP */
+#define WME_QI_AP_APSD_MASK         0x80        /* U-APSD Supported mask */
+#define WME_QI_AP_APSD_SHIFT        7           /* U-APSD Supported shift */
+#define WME_QI_AP_COUNT_MASK        0x0f        /* Parameter set count mask */
+#define WME_QI_AP_COUNT_SHIFT       0           /* Parameter set count shift */
+
+/* QoS Info field for IE as sent from STA */
+#define WME_QI_STA_MAXSPLEN_MASK    0x60        /* Max Service Period Length mask */
+#define WME_QI_STA_MAXSPLEN_SHIFT   5           /* Max Service Period Length shift */
+#define WME_QI_STA_APSD_ALL_MASK    0xf         /* APSD all AC bits mask */
+#define WME_QI_STA_APSD_ALL_SHIFT   0           /* APSD all AC bits shift */
+#define WME_QI_STA_APSD_BE_MASK     0x8         /* APSD AC_BE mask */
+#define WME_QI_STA_APSD_BE_SHIFT    3           /* APSD AC_BE shift */
+#define WME_QI_STA_APSD_BK_MASK     0x4         /* APSD AC_BK mask */
+#define WME_QI_STA_APSD_BK_SHIFT    2           /* APSD AC_BK shift */
+#define WME_QI_STA_APSD_VI_MASK     0x2         /* APSD AC_VI mask */
+#define WME_QI_STA_APSD_VI_SHIFT    1           /* APSD AC_VI shift */
+#define WME_QI_STA_APSD_VO_MASK     0x1         /* APSD AC_VO mask */
+#define WME_QI_STA_APSD_VO_SHIFT    0           /* APSD AC_VO shift */
+
+/* ACI */
+#define EDCF_AIFSN_MIN               1           /* AIFSN minimum value */
+#define EDCF_AIFSN_MAX               15          /* AIFSN maximum value */
+#define EDCF_AIFSN_MASK              0x0f        /* AIFSN mask */
+#define EDCF_ACM_MASK                0x10        /* ACM mask */
+#define EDCF_ACI_MASK                0x60        /* ACI mask */
+#define EDCF_ACI_SHIFT               5           /* ACI shift */
+
+/* ECW */
+#define EDCF_ECW_MIN                 0           /* cwmin/cwmax exponent minimum value */
+#define EDCF_ECW_MAX                 15          /* cwmin/cwmax exponent maximum value */
+#define EDCF_ECW2CW(exp)             ((1 << (exp)) - 1)
+#define EDCF_ECWMIN_MASK             0x0f        /* cwmin exponent form mask */
+#define EDCF_ECWMAX_MASK             0xf0        /* cwmax exponent form mask */
+#define EDCF_ECWMAX_SHIFT            4           /* cwmax exponent form shift */
+
+/* TXOP */
+#define EDCF_TXOP_MIN                0           /* TXOP minimum value */
+#define EDCF_TXOP_MAX                65535       /* TXOP maximum value */
+#define EDCF_TXOP2USEC(txop)         ((txop) << 5)
+
+/* Default EDCF parameters that AP advertises for STA to use; WMM draft Table 12 */
+#define EDCF_AC_BE_ACI_STA           0x03	/* STA ACI value for best effort AC */
+#define EDCF_AC_BE_ECW_STA           0xA4	/* STA ECW value for best effort AC */
+#define EDCF_AC_BE_TXOP_STA          0x0000	/* STA TXOP value for best effort AC */
+#define EDCF_AC_BK_ACI_STA           0x27	/* STA ACI value for background AC */
+#define EDCF_AC_BK_ECW_STA           0xA4	/* STA ECW value for background AC */
+#define EDCF_AC_BK_TXOP_STA          0x0000	/* STA TXOP value for background AC */
+#define EDCF_AC_VI_ACI_STA           0x42	/* STA ACI value for video AC */
+#define EDCF_AC_VI_ECW_STA           0x43	/* STA ECW value for video AC */
+#define EDCF_AC_VI_TXOP_STA          0x005e	/* STA TXOP value for video AC */
+#define EDCF_AC_VO_ACI_STA           0x62	/* STA ACI value for audio AC */
+#define EDCF_AC_VO_ECW_STA           0x32	/* STA ECW value for audio AC */
+#define EDCF_AC_VO_TXOP_STA          0x002f	/* STA TXOP value for audio AC */
+
+/* Default EDCF parameters that AP uses; WMM draft Table 14 */
+#define EDCF_AC_BE_ACI_AP            0x03	/* AP ACI value for best effort AC */
+#define EDCF_AC_BE_ECW_AP            0x64	/* AP ECW value for best effort AC */
+#define EDCF_AC_BE_TXOP_AP           0x0000	/* AP TXOP value for best effort AC */
+#define EDCF_AC_BK_ACI_AP            0x27	/* AP ACI value for background AC */
+#define EDCF_AC_BK_ECW_AP            0xA4	/* AP ECW value for background AC */
+#define EDCF_AC_BK_TXOP_AP           0x0000	/* AP TXOP value for background AC */
+#define EDCF_AC_VI_ACI_AP            0x41	/* AP ACI value for video AC */
+#define EDCF_AC_VI_ECW_AP            0x43	/* AP ECW value for video AC */
+#define EDCF_AC_VI_TXOP_AP           0x005e	/* AP TXOP value for video AC */
+#define EDCF_AC_VO_ACI_AP            0x61	/* AP ACI value for audio AC */
+#define EDCF_AC_VO_ECW_AP            0x32	/* AP ECW value for audio AC */
+#define EDCF_AC_VO_TXOP_AP           0x002f	/* AP TXOP value for audio AC */
+
+struct dot11_qbss_load_ie {
+	uint8 id; 			/* 11, DOT11_MNG_QBSS_LOAD_ID */
+	uint8 length;
+	uint16 station_count; 		/* total number of STAs associated */
+	uint8 channel_utilization;	/* % of time, normalized to 255, QAP sensed medium busy */
+	uint16 aac; 			/* available admission capacity */
+} PACKED;
+typedef struct dot11_qbss_load_ie dot11_qbss_load_ie_t;
+
+/* nom_msdu_size */
+#define FIXED_MSDU_SIZE 0x8000		/* MSDU size is fixed */
+#define MSDU_SIZE_MASK	0x7fff		/* (Nominal or fixed) MSDU size */
+
+/* surplus_bandwidth */
+/* Represented as 3 bits of integer, binary point, 13 bits fraction */
+#define	INTEGER_SHIFT	13	/* integer shift */
+#define FRACTION_MASK	0x1FFF	/* fraction mask */
+
+/* Management Notification Frame */
+struct dot11_management_notification {
+	uint8 category;			/* DOT11_ACTION_NOTIFICATION */
+	uint8 action;
+	uint8 token;
+	uint8 status;
+	uint8 data[1];			/* Elements */
+} PACKED;
+#define DOT11_MGMT_NOTIFICATION_LEN 4	/* Fixed length */
+
+/* WME Action Codes */
+#define WME_ADDTS_REQUEST	0	/* WME ADDTS request */
+#define WME_ADDTS_RESPONSE	1	/* WME ADDTS response */
+#define WME_DELTS_REQUEST	2	/* WME DELTS request */
+
+/* WME Setup Response Status Codes */
+#define WME_ADMISSION_ACCEPTED	0	/* WME admission accepted */
+#define WME_INVALID_PARAMETERS	1	/* WME invalide parameters */
+#define WME_ADMISSION_REFUSED	3	/* WME admission refused */
+
+/* Macro to take a pointer to a beacon or probe response
+ * body and return the char* pointer to the SSID info element
+ */
+#define BCN_PRB_SSID(body) ((char*)(body) + DOT11_BCN_PRB_LEN)
+
+/* Authentication frame payload constants */
+#define DOT11_OPEN_SYSTEM	0	/* d11 open authentication */
+#define DOT11_SHARED_KEY	1	/* d11 shared authentication */
+#define DOT11_CHALLENGE_LEN	128	/* d11 challenge text length */
+
+/* Frame control macros */
+#define FC_PVER_MASK		0x3	/* PVER mask */
+#define FC_PVER_SHIFT		0	/* PVER shift */
+#define FC_TYPE_MASK		0xC	/* type mask */
+#define FC_TYPE_SHIFT		2	/* type shift */
+#define FC_SUBTYPE_MASK		0xF0	/* subtype mask */
+#define FC_SUBTYPE_SHIFT	4	/* subtype shift */
+#define FC_TODS			0x100	/* to DS */
+#define FC_TODS_SHIFT		8	/* to DS shift */
+#define FC_FROMDS		0x200	/* from DS */
+#define FC_FROMDS_SHIFT		9	/* from DS shift */
+#define FC_MOREFRAG		0x400	/* more frag. */
+#define FC_MOREFRAG_SHIFT	10	/* more frag. shift */
+#define FC_RETRY		0x800	/* retry */
+#define FC_RETRY_SHIFT		11	/* retry shift */
+#define FC_PM			0x1000	/* PM */
+#define FC_PM_SHIFT		12	/* PM shift */
+#define FC_MOREDATA		0x2000	/* more data */
+#define FC_MOREDATA_SHIFT	13	/* more data shift */
+#define FC_WEP			0x4000	/* WEP */
+#define FC_WEP_SHIFT		14	/* WEP shift */
+#define FC_ORDER		0x8000	/* order */
+#define FC_ORDER_SHIFT		15	/* order shift */
+
+/* sequence control macros */
+#define SEQNUM_SHIFT		4	/* seq. number shift */
+#define SEQNUM_MAX		0x1000	/* max seqnum + 1 */
+#define FRAGNUM_MASK		0xF	/* frag. number mask */
+
+/* Frame Control type/subtype defs */
+
+/* FC Types */
+#define FC_TYPE_MNG		0	/* management type */
+#define FC_TYPE_CTL		1	/* control type */
+#define FC_TYPE_DATA		2	/* data type */
+
+/* Management Subtypes */
+#define FC_SUBTYPE_ASSOC_REQ		0	/* assoc. request */
+#define FC_SUBTYPE_ASSOC_RESP		1	/* assoc. response */
+#define FC_SUBTYPE_REASSOC_REQ		2	/* reassoc. request */
+#define FC_SUBTYPE_REASSOC_RESP		3	/* reassoc. response */
+#define FC_SUBTYPE_PROBE_REQ		4	/* probe request */
+#define FC_SUBTYPE_PROBE_RESP		5	/* probe response */
+#define FC_SUBTYPE_BEACON		8	/* beacon */
+#define FC_SUBTYPE_ATIM			9	/* ATIM */
+#define FC_SUBTYPE_DISASSOC		10	/* disassoc. */
+#define FC_SUBTYPE_AUTH			11	/* authentication */
+#define FC_SUBTYPE_DEAUTH		12	/* de-authentication */
+#define FC_SUBTYPE_ACTION		13	/* action */
+#define FC_SUBTYPE_ACTION_NOACK		14	/* action no-ack */
+
+/* Control Subtypes */
+#define FC_SUBTYPE_CTL_WRAPPER		7	/* Control Wrapper */
+#define FC_SUBTYPE_BLOCKACK_REQ		8	/* Block Ack Req */
+#define FC_SUBTYPE_BLOCKACK		9	/* Block Ack */
+#define FC_SUBTYPE_PS_POLL		10	/* PS poll */
+#define FC_SUBTYPE_RTS			11	/* RTS */
+#define FC_SUBTYPE_CTS			12	/* CTS */
+#define FC_SUBTYPE_ACK			13	/* ACK */
+#define FC_SUBTYPE_CF_END		14	/* CF-END */
+#define FC_SUBTYPE_CF_END_ACK		15	/* CF-END ACK */
+
+/* Data Subtypes */
+#define FC_SUBTYPE_DATA			0	/* Data */
+#define FC_SUBTYPE_DATA_CF_ACK		1	/* Data + CF-ACK */
+#define FC_SUBTYPE_DATA_CF_POLL		2	/* Data + CF-Poll */
+#define FC_SUBTYPE_DATA_CF_ACK_POLL	3	/* Data + CF-Ack + CF-Poll */
+#define FC_SUBTYPE_NULL			4	/* Null */
+#define FC_SUBTYPE_CF_ACK		5	/* CF-Ack */
+#define FC_SUBTYPE_CF_POLL		6	/* CF-Poll */
+#define FC_SUBTYPE_CF_ACK_POLL		7	/* CF-Ack + CF-Poll */
+#define FC_SUBTYPE_QOS_DATA		8	/* QoS Data */
+#define FC_SUBTYPE_QOS_DATA_CF_ACK	9	/* QoS Data + CF-Ack */
+#define FC_SUBTYPE_QOS_DATA_CF_POLL	10	/* QoS Data + CF-Poll */
+#define FC_SUBTYPE_QOS_DATA_CF_ACK_POLL	11	/* QoS Data + CF-Ack + CF-Poll */
+#define FC_SUBTYPE_QOS_NULL		12	/* QoS Null */
+#define FC_SUBTYPE_QOS_CF_POLL		14	/* QoS CF-Poll */
+#define FC_SUBTYPE_QOS_CF_ACK_POLL	15	/* QoS CF-Ack + CF-Poll */
+
+/* Data Subtype Groups */
+#define FC_SUBTYPE_ANY_QOS(s)		(((s) & 8) != 0)
+#define FC_SUBTYPE_ANY_NULL(s)		(((s) & 4) != 0)
+#define FC_SUBTYPE_ANY_CF_POLL(s)	(((s) & 2) != 0)
+#define FC_SUBTYPE_ANY_CF_ACK(s)	(((s) & 1) != 0)
+
+/* Type/Subtype Combos */
+#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)	/* FC kind mask */
+
+#define FC_KIND(t, s)	(((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))	/* FC kind */
+
+#define FC_SUBTYPE(fc)	(((fc) & FC_SUBTYPE_MASK) >> FC_SUBTYPE_SHIFT)	/* Subtype from FC */
+#define FC_TYPE(fc)	(((fc) & FC_TYPE_MASK) >> FC_TYPE_SHIFT)	/* Type from FC */
+
+#define FC_ASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)	/* assoc. request */
+#define FC_ASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)	/* assoc. response */
+#define FC_REASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)	/* reassoc. request */
+#define FC_REASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)	/* reassoc. response */
+#define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)	/* probe request */
+#define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)	/* probe response */
+#define FC_BEACON	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)		/* beacon */
+#define FC_DISASSOC	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)	/* disassoc */
+#define FC_AUTH		FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)		/* authentication */
+#define FC_DEAUTH	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)		/* deauthentication */
+#define FC_ACTION	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)		/* action */
+#define FC_ACTION_NOACK	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION_NOACK)	/* action no-ack */
+
+#define FC_CTL_WRAPPER	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTL_WRAPPER)	/* Control Wrapper */
+#define FC_BLOCKACK_REQ	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK_REQ)	/* Block Ack Req */
+#define FC_BLOCKACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK)	/* Block Ack */
+#define FC_PS_POLL	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)	/* PS poll */
+#define FC_RTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)		/* RTS */
+#define FC_CTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)		/* CTS */
+#define FC_ACK		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)		/* ACK */
+#define FC_CF_END	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)		/* CF-END */
+#define FC_CF_END_ACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)	/* CF-END ACK */
+
+#define FC_DATA		FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)		/* data */
+#define FC_NULL_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)		/* null data */
+#define FC_DATA_CF_ACK	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)	/* data CF ACK */
+#define FC_QOS_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)	/* QoS data */
+#define FC_QOS_NULL	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)	/* QoS null */
+
+/* QoS Control Field */
+
+/* 802.1D Priority */
+#define QOS_PRIO_SHIFT		0	/* QoS priority shift */
+#define QOS_PRIO_MASK		0x0007	/* QoS priority mask */
+#define QOS_PRIO(qos)		(((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)	/* QoS priority */
+
+/* Traffic Identifier */
+#define QOS_TID_SHIFT		0	/* QoS TID shift */
+#define QOS_TID_MASK		0x000f	/* QoS TID mask */
+#define QOS_TID(qos)		(((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)	/* QoS TID */
+
+/* End of Service Period (U-APSD) */
+#define QOS_EOSP_SHIFT		4	/* QoS End of Service Period shift */
+#define QOS_EOSP_MASK		0x0010	/* QoS End of Service Period mask */
+#define QOS_EOSP(qos)		(((qos) & QOS_EOSP_MASK) >> QOS_EOSP_SHIFT)	/* Qos EOSP */
+
+/* Ack Policy */
+#define QOS_ACK_NORMAL_ACK	0	/* Normal Ack */
+#define QOS_ACK_NO_ACK		1	/* No Ack (eg mcast) */
+#define QOS_ACK_NO_EXP_ACK	2	/* No Explicit Ack */
+#define QOS_ACK_BLOCK_ACK	3	/* Block Ack */
+#define QOS_ACK_SHIFT		5	/* QoS ACK shift */
+#define QOS_ACK_MASK		0x0060	/* QoS ACK mask */
+#define QOS_ACK(qos)		(((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)	/* QoS ACK */
+
+/* A-MSDU flag */
+#define QOS_AMSDU_SHIFT		7	/* AMSDU shift */
+#define QOS_AMSDU_MASK		0x0080	/* AMSDU mask */
+
+/* Management Frames */
+
+/* Management Frame Constants */
+
+/* Fixed fields */
+#define DOT11_MNG_AUTH_ALGO_LEN		2	/* d11 management auth. algo. length */
+#define DOT11_MNG_AUTH_SEQ_LEN		2	/* d11 management auth. seq. length */
+#define DOT11_MNG_BEACON_INT_LEN	2	/* d11 management beacon interval length */
+#define DOT11_MNG_CAP_LEN		2	/* d11 management cap. length */
+#define DOT11_MNG_AP_ADDR_LEN		6	/* d11 management AP address length */
+#define DOT11_MNG_LISTEN_INT_LEN	2	/* d11 management listen interval length */
+#define DOT11_MNG_REASON_LEN		2	/* d11 management reason length */
+#define DOT11_MNG_AID_LEN		2	/* d11 management AID length */
+#define DOT11_MNG_STATUS_LEN		2	/* d11 management status length */
+#define DOT11_MNG_TIMESTAMP_LEN		8	/* d11 management timestamp length */
+
+/* DUR/ID field in assoc resp is 0xc000 | AID */
+#define DOT11_AID_MASK			0x3fff	/* d11 AID mask */
+
+/* Reason Codes */
+#define DOT11_RC_RESERVED		0	/* d11 RC reserved */
+#define DOT11_RC_UNSPECIFIED		1	/* Unspecified reason */
+#define DOT11_RC_AUTH_INVAL		2	/* Previous authentication no longer valid */
+#define DOT11_RC_DEAUTH_LEAVING		3	/* Deauthenticated because sending station
+						 * is leaving (or has left) IBSS or ESS
+						 */
+#define DOT11_RC_INACTIVITY		4	/* Disassociated due to inactivity */
+#define DOT11_RC_BUSY			5	/* Disassociated because AP is unable to handle
+						 * all currently associated stations
+						 */
+#define DOT11_RC_INVAL_CLASS_2		6	/* Class 2 frame received from
+						 * nonauthenticated station
+						 */
+#define DOT11_RC_INVAL_CLASS_3		7	/* Class 3 frame received from
+						 *  nonassociated station
+						 */
+#define DOT11_RC_DISASSOC_LEAVING	8	/* Disassociated because sending station is
+						 * leaving (or has left) BSS
+						 */
+#define DOT11_RC_NOT_AUTH		9	/* Station requesting (re)association is not
+						 * authenticated with responding station
+						 */
+#define DOT11_RC_BAD_PC			10	/* Unacceptable power capability element */
+#define DOT11_RC_BAD_CHANNELS		11	/* Unacceptable supported channels element */
+/* 12 is unused */
+
+/* 32-39 are QSTA specific reasons added in 11e */
+#define DOT11_RC_UNSPECIFIED_QOS	32	/* unspecified QoS-related reason */
+#define DOT11_RC_INSUFFCIENT_BW		33	/* QAP lacks sufficient bandwidth */
+#define DOT11_RC_EXCESSIVE_FRAMES	34	/* excessive number of frames need ack */
+#define DOT11_RC_TX_OUTSIDE_TXOP	35	/* transmitting outside the limits of txop */
+#define DOT11_RC_LEAVING_QBSS		36	/* QSTA is leaving the QBSS (or restting) */
+#define DOT11_RC_BAD_MECHANISM		37	/* does not want to use the mechanism */
+#define DOT11_RC_SETUP_NEEDED		38	/* mechanism needs a setup */
+#define DOT11_RC_TIMEOUT		39	/* timeout */
+
+#define DOT11_RC_MAX			23	/* Reason codes > 23 are reserved */
+
+/* Status Codes */
+#define DOT11_SC_SUCCESS		0	/* Successful */
+#define DOT11_SC_FAILURE		1	/* Unspecified failure */
+#define DOT11_SC_CAP_MISMATCH		10	/* Cannot support all requested
+						 * capabilities in the Capability
+						 * Information field
+						 */
+#define DOT11_SC_REASSOC_FAIL		11	/* Reassociation denied due to inability
+						 * to confirm that association exists
+						 */
+#define DOT11_SC_ASSOC_FAIL		12	/* Association denied due to reason
+						 * outside the scope of this standard
+						 */
+#define DOT11_SC_AUTH_MISMATCH		13	/* Responding station does not support
+						 * the specified authentication
+						 * algorithm
+						 */
+#define DOT11_SC_AUTH_SEQ		14	/* Received an Authentication frame
+						 * with authentication transaction
+						 * sequence number out of expected
+						 * sequence
+						 */
+#define DOT11_SC_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of
+						 * challenge failure
+						 */
+#define DOT11_SC_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout
+						 * waiting for next frame in sequence
+						 */
+#define DOT11_SC_ASSOC_BUSY_FAIL	17	/* Association denied because AP is
+						 * unable to handle additional
+						 * associated stations
+						 */
+#define DOT11_SC_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting
+						 * station not supporting all of the
+						 * data rates in the BSSBasicRateSet
+						 * parameter
+						 */
+#define DOT11_SC_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting
+						 * station not supporting the Short
+						 * Preamble option
+						 */
+#define DOT11_SC_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting
+						 * station not supporting the PBCC
+						 * Modulation option
+						 */
+#define DOT11_SC_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting
+						 * station not supporting the Channel
+						 * Agility option
+						 */
+#define DOT11_SC_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum
+							 * Management capability is required.
+							 */
+#define DOT11_SC_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info
+						 * in the Power Cap element is
+						 * unacceptable.
+						 */
+#define DOT11_SC_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info
+						 * in the Supported Channel element is
+						 * unacceptable
+						 */
+#define DOT11_SC_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting
+							 * station not supporting the Short Slot
+							 * Time option
+							 */
+#define DOT11_SC_ASSOC_ERPBCC_REQUIRED	26	/* Association denied due to requesting
+						 * station not supporting the ER-PBCC
+						 * Modulation option
+						 */
+#define DOT11_SC_ASSOC_DSSOFDM_REQUIRED	27	/* Association denied due to requesting
+						 * station not supporting the DSS-OFDM
+						 * option
+						 */
+
+#define	DOT11_SC_DECLINED		37	/* request declined */
+#define	DOT11_SC_INVALID_PARAMS		38	/* One or more params have invalid values */
+
+/* Info Elts, length of INFORMATION portion of Info Elts */
+#define DOT11_MNG_DS_PARAM_LEN			1	/* d11 management DS parameter length */
+#define DOT11_MNG_IBSS_PARAM_LEN		2	/* d11 management IBSS parameter length */
+
+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
+ * followed by 1 to 251 bytes of Partial Virtual Bitmap
+ */
+#define DOT11_MNG_TIM_FIXED_LEN			3	/* d11 management TIM fixed length */
+#define DOT11_MNG_TIM_DTIM_COUNT		0	/* d11 management DTIM count */
+#define DOT11_MNG_TIM_DTIM_PERIOD		1	/* d11 management DTIM period */
+#define DOT11_MNG_TIM_BITMAP_CTL		2	/* d11 management TIM BITMAP control  */
+#define DOT11_MNG_TIM_PVB			3	/* d11 management TIM PVB */
+
+/* TLV defines */
+#define TLV_TAG_OFF		0	/* tag offset */
+#define TLV_LEN_OFF		1	/* length offset */
+#define TLV_HDR_LEN		2	/* header length */
+#define TLV_BODY_OFF		2	/* body offset */
+
+/* Management Frame Information Element IDs */
+#define DOT11_MNG_SSID_ID			0	/* d11 management SSID id */
+#define DOT11_MNG_RATES_ID			1	/* d11 management rates id */
+#define DOT11_MNG_FH_PARMS_ID			2	/* d11 management FH parameter id */
+#define DOT11_MNG_DS_PARMS_ID			3	/* d11 management DS parameter id */
+#define DOT11_MNG_CF_PARMS_ID			4	/* d11 management CF parameter id */
+#define DOT11_MNG_TIM_ID			5	/* d11 management TIM id */
+#define DOT11_MNG_IBSS_PARMS_ID			6	/* d11 management IBSS parameter id */
+#define DOT11_MNG_COUNTRY_ID			7	/* d11 management country id */
+#define DOT11_MNG_HOPPING_PARMS_ID		8	/* d11 management hopping parameter id */
+#define DOT11_MNG_HOPPING_TABLE_ID		9	/* d11 management hopping table id */
+#define DOT11_MNG_REQUEST_ID			10	/* d11 management request id */
+#define DOT11_MNG_QBSS_LOAD_ID 			11	/* d11 management QBSS Load id */
+#define DOT11_MNG_CHALLENGE_ID			16	/* d11 management chanllenge id */
+#define DOT11_MNG_PWR_CONSTRAINT_ID		32	/* 11H PowerConstraint */
+#define DOT11_MNG_PWR_CAP_ID			33	/* 11H PowerCapability */
+#define DOT11_MNG_TPC_REQUEST_ID 		34	/* 11H TPC Request */
+#define DOT11_MNG_TPC_REPORT_ID			35	/* 11H TPC Report */
+#define DOT11_MNG_SUPP_CHANNELS_ID		36	/* 11H Supported Channels */
+#define DOT11_MNG_CHANNEL_SWITCH_ID		37	/* 11H ChannelSwitch Announcement */
+#define DOT11_MNG_MEASURE_REQUEST_ID		38	/* 11H MeasurementRequest */
+#define DOT11_MNG_MEASURE_REPORT_ID		39	/* 11H MeasurementReport */
+#define DOT11_MNG_QUIET_ID			40	/* 11H Quiet */
+#define DOT11_MNG_IBSS_DFS_ID			41	/* 11H IBSS_DFS */
+#define DOT11_MNG_ERP_ID			42	/* d11 management ERP id */
+#define DOT11_MNG_TS_DELAY_ID			43	/* d11 management TS Delay id */
+#define	DOT11_MNG_HT_CAP			45	/* d11 mgmt HT cap id */
+#define DOT11_MNG_NONERP_ID			47	/* d11 management NON-ERP id */
+#define DOT11_MNG_RSN_ID			48	/* d11 management RSN id */
+#define DOT11_MNG_EXT_RATES_ID			50	/* d11 management ext. rates id */
+#define DOT11_MNG_EXT_CSA_ID			60	/* d11 Extended CSA */
+#define	DOT11_MNG_HT_ADD			61	/* d11 mgmt additional HT info */
+#define	DOT11_MNG_EXT_CHANNEL_OFFSET		62	/* d11 mgmt ext channel offset */
+#define	DOT11_MNG_EXT_CAP			127	/* d11 mgmt ext capability */
+#define DOT11_MNG_WPA_ID			221	/* d11 management WPA id */
+#define DOT11_MNG_PROPR_ID			221	/* d11 management proprietary id */
+
+/* Rate element Basic flag and rate mask */
+#define DOT11_RATE_BASIC			0x80	/* flag for a Basic Rate */
+#define DOT11_RATE_MASK				0x7F	/* mask for numeric part of rate */
+
+/* ERP info element bit values */
+#define DOT11_MNG_ERP_LEN			1	/* ERP is currently 1 byte long */
+#define DOT11_MNG_NONERP_PRESENT		0x01	/* NonERP (802.11b) STAs are present
+							 *in the BSS
+							 */
+#define DOT11_MNG_USE_PROTECTION		0x02	/* Use protection mechanisms for
+							 *ERP-OFDM frames
+							 */
+#define DOT11_MNG_BARKER_PREAMBLE		0x04	/* Short Preambles: 0 == allowed,
+							 * 1 == not allowed
+							 */
+/* TS Delay element offset & size */
+#define DOT11_MGN_TS_DELAY_LEN		4	/* length of TS DELAY IE */
+#define TS_DELAY_FIELD_SIZE			4	/* TS DELAY field size */
+
+/* Capability Information Field */
+#define DOT11_CAP_ESS				0x0001	/* d11 cap. ESS */
+#define DOT11_CAP_IBSS				0x0002	/* d11 cap. IBSS */
+#define DOT11_CAP_POLLABLE			0x0004	/* d11 cap. pollable */
+#define DOT11_CAP_POLL_RQ			0x0008	/* d11 cap. poll request */
+#define DOT11_CAP_PRIVACY			0x0010	/* d11 cap. privacy */
+#define DOT11_CAP_SHORT				0x0020	/* d11 cap. short */
+#define DOT11_CAP_PBCC				0x0040	/* d11 cap. PBCC */
+#define DOT11_CAP_AGILITY			0x0080	/* d11 cap. agility */
+#define DOT11_CAP_SPECTRUM			0x0100	/* d11 cap. spectrum */
+#define DOT11_CAP_SHORTSLOT			0x0400	/* d11 cap. shortslot */
+#define DOT11_CAP_CCK_OFDM			0x2000	/* d11 cap. CCK/OFDM */
+
+/* Extended Capability Information Field */
+#define DOT11_EXT_CAP_HT_IE_SUPPORT	0x01	/* support for info xchg action frame */
+
+/* Action Frame Constants */
+#define DOT11_ACTION_HDR_LEN		2	/* action frame header length */
+#define DOT11_ACTION_CAT_ERR_MASK	0x80	/* d11 action category error mask */
+#define DOT11_ACTION_CAT_MASK		0x7F	/* d11 action category mask */
+#define DOT11_ACTION_CAT_SPECT_MNG	0x00	/* d11 action category spectrum management */
+#define DOT11_ACTION_CAT_BLOCKACK	0x03	/* d11 action category block ack */
+#define DOT11_ACTION_CAT_HT		0x07	/* d11 action category for HT */
+#define DOT11_ACTION_NOTIFICATION	0x11	/* 17 */
+
+#define DOT11_ACTION_ID_M_REQ		0	/* d11 action measurement request */
+#define DOT11_ACTION_ID_M_REP		1	/* d11 action measurement response */
+#define DOT11_ACTION_ID_TPC_REQ		2	/* d11 action TPC request */
+#define DOT11_ACTION_ID_TPC_REP		3	/* d11 action TPC response */
+#define DOT11_ACTION_ID_CHANNEL_SWITCH	4	/* d11 action channel switch */
+#define DOT11_ACTION_ID_EXT_CSA		5	/* d11 extened CSA for 11n */
+
+/* HT action ids */
+#define DOT11_ACTION_ID_HT_CH_WIDTH	0	/* notify channel width action id */
+#define DOT11_ACTION_ID_HT_MIMO_PS	1	/* mimo ps action id */
+#define DOT11_ACTION_ID_HT_INFO_XCHG	8	/* HT Information Exchange action id */
+
+/* Block Ack action types */
+#define DOT11_BA_ACTION_ADDBA_REQ	0	/* ADDBA Req action frame type */
+#define DOT11_BA_ACTION_ADDBA_RESP	1	/* ADDBA Resp action frame type */
+#define DOT11_BA_ACTION_DELBA		2	/* DELBA action frame type */
+
+/* ADDBA action parameters */
+#define DOT11_ADDBA_PARAM_AMSDU_SUP	0x0001	/* AMSDU supported under BA */
+#define DOT11_ADDBA_PARAM_POLICY_MASK	0x0002	/* policy mask(ack vs delayed) */
+#define DOT11_ADDBA_PARAM_POLICY_SHIFT	1	/* policy shift */
+#define DOT11_ADDBA_PARAM_TID_MASK	0x003c	/* tid mask */
+#define DOT11_ADDBA_PARAM_TID_SHIFT	2	/* tid shift */
+#define DOT11_ADDBA_PARAM_BSIZE_MASK	0xffc0	/* buffer size mask */
+#define DOT11_ADDBA_PARAM_BSIZE_SHIFT	6	/* buffer size shift */
+
+#define DOT11_ADDBA_POLICY_DELAYED	0	/* delayed BA policy */
+#define DOT11_ADDBA_POLICY_IMMEDIATE	1	/* immediate BA policy */
+
+struct dot11_addba_req {
+	uint8 category;				/* category of action frame (3) */
+	uint8 action;				/* action: addba req */
+	uint8 token;				/* identifier */
+	uint16 addba_param_set;			/* parameter set */
+	uint16 timeout;				/* timeout in seconds */
+	uint16 start_seqnum;			/* starting sequence number */
+}PACKED;
+typedef struct dot11_addba_req dot11_addba_req_t;
+#define DOT11_ADDBA_REQ_LEN		9	/* length of addba req frame */
+
+struct dot11_addba_resp {
+	uint8 category;				/* category of action frame (3) */
+	uint8 action;				/* action: addba resp */
+	uint8 token;				/* identifier */
+	uint16 status;				/* status of add request */
+	uint16 addba_param_set;			/* negotiated parameter set */
+	uint16 timeout;				/* negotiated timeout in seconds */
+}PACKED;
+typedef struct dot11_addba_resp dot11_addba_resp_t;
+#define DOT11_ADDBA_RESP_LEN		9	/* length of addba resp frame */
+
+/* DELBA action parameters */
+#define DOT11_DELBA_PARAM_INIT_MASK	0x0800	/* initiator mask */
+#define DOT11_DELBA_PARAM_INIT_SHIFT	11	/* initiator shift */
+#define DOT11_DELBA_PARAM_TID_MASK	0xf000	/* tid mask */
+#define DOT11_DELBA_PARAM_TID_SHIFT	12	/* tid shift */
+
+struct dot11_delba {
+	uint8 category;				/* category of action frame (3) */
+	uint8 action;				/* action: addba req */
+	uint16 delba_param_set;			/* paarmeter set */
+	uint16 reason;				/* reason for dellba */
+}PACKED;
+typedef struct dot11_delba dot11_delba_t;
+#define DOT11_DELBA_LEN			6	/* length of delba frame */
+
+/* MLME Enumerations */
+#define DOT11_BSSTYPE_INFRASTRUCTURE		0	/* d11 infrastructure */
+#define DOT11_BSSTYPE_INDEPENDENT		1	/* d11 independent */
+#define DOT11_BSSTYPE_ANY			2	/* d11 any BSS type */
+#define DOT11_SCANTYPE_ACTIVE			0	/* d11 scan active */
+#define DOT11_SCANTYPE_PASSIVE			1	/* d11 scan passive */
+
+/* 802.11 BRCM "Compromise" Pre N constants */
+#define PREN_PREAMBLE		24	/* green field preamble time */
+#define PREN_MM_EXT		8	/* extra mixed mode preamble time */
+#define PREN_PREAMBLE_EXT	4	/* extra preamble (multiply by unique_streams-1) */
+
+/* 802.11 N PHY constants */
+#define NPHY_RIFS_TIME		2	/* NPHY RIFS time */
+
+/* 802.11 A PHY constants */
+#define APHY_SLOT_TIME		9	/* APHY slot time */
+#define APHY_SIFS_TIME		16	/* APHY SIFS time */
+#define APHY_DIFS_TIME		(APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))	/* APHY DIFS time */
+#define APHY_PREAMBLE_TIME	16	/* APHY preamble time */
+#define APHY_SIGNAL_TIME	4	/* APHY signal time */
+#define APHY_SYMBOL_TIME	4	/* APHY symbol time */
+#define APHY_SERVICE_NBITS	16	/* APHY service nbits */
+#define APHY_TAIL_NBITS		6	/* APHY tail nbits */
+#define	APHY_CWMIN		15	/* APHY cwmin */
+
+/* 802.11 B PHY constants */
+#define BPHY_SLOT_TIME		20	/* BPHY slot time */
+#define BPHY_SIFS_TIME		10	/* BPHY SIFS time */
+#define BPHY_DIFS_TIME		50	/* BPHY DIFS time */
+#define BPHY_PLCP_TIME		192	/* BPHY PLCP time */
+#define BPHY_PLCP_SHORT_TIME	96	/* BPHY PLCP short time */
+#define	BPHY_CWMIN		31	/* BPHY cwmin */
+
+/* 802.11 G constants */
+#define DOT11_OFDM_SIGNAL_EXTENSION	6	/* d11 OFDM signal extension */
+
+#define PHY_CWMAX		1023	/* PHY cwmax */
+
+#define	DOT11_MAXNUMFRAGS	16	/* max # fragments per MSDU */
+
+/* dot11Counters Table - 802.11 spec., Annex D */
+typedef struct d11cnt {
+	uint32		txfrag;		/* dot11TransmittedFragmentCount */
+	uint32		txmulti;	/* dot11MulticastTransmittedFrameCount */
+	uint32		txfail;		/* dot11FailedCount */
+	uint32		txretry;	/* dot11RetryCount */
+	uint32		txretrie;	/* dot11MultipleRetryCount */
+	uint32		rxdup;		/* dot11FrameduplicateCount */
+	uint32		txrts;		/* dot11RTSSuccessCount */
+	uint32		txnocts;	/* dot11RTSFailureCount */
+	uint32		txnoack;	/* dot11ACKFailureCount */
+	uint32		rxfrag;		/* dot11ReceivedFragmentCount */
+	uint32		rxmulti;	/* dot11MulticastReceivedFrameCount */
+	uint32		rxcrc;		/* dot11FCSErrorCount */
+	uint32		txfrmsnt;	/* dot11TransmittedFrameCount */
+	uint32		rxundec;	/* dot11WEPUndecryptableCount */
+} d11cnt_t;
+
+/* BRCM OUI */
+#define BRCM_OUI		"\x00\x10\x18"	/* Broadcom OUI */
+
+/* OUI for BRCM proprietary IE */
+#define BRCM_PROP_OUI		"\x00\x90\x4C"	/* Broadcom proprietary OUI */
+
+/* BRCM info element */
+struct brcm_ie {
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];		/* Proprietary OUI, BRCM_OUI */
+	uint8	ver;		/* type/ver of this IE */
+	uint8	assoc;		/* # of assoc STAs */
+	uint8	flags;		/* misc flags */
+	uint8	flags1;		/* misc flags */
+	uint16	amsdu_mtu_pref;	/* preferred A-MSDU MTU */
+} PACKED;
+typedef	struct brcm_ie brcm_ie_t;
+#define BRCM_IE_LEN		11	/* BRCM IE length */
+#define BRCM_IE_VER		2	/* BRCM IE version */
+#define BRCM_IE_LEGACY_AES_VER	1	/* BRCM IE legacy AES version */
+
+/* brcm_ie flags */
+#define	BRF_ABCAP		0x1	/* afterburner capable */
+#define	BRF_ABRQRD		0x2	/* afterburner requested */
+#define	BRF_LZWDS		0x4	/* lazy wds enabled */
+#define	BRF_BLOCKACK		0x8	/* BlockACK capable */
+#define BRF_ABCOUNTER_MASK	0xf0	/* afterburner wds "state" counter */
+#define BRF_ABCOUNTER_SHIFT	4	/* offset of afterburner wds "state" counter */
+
+/* brcm_ie flags1 */
+#define	BRF1_AMSDU		0x1	/* A-MSDU capable */
+#define	BRF1_DPT		0x2	/* DPT capable */
+
+#define AB_WDS_TIMEOUT_MAX	15	/* afterburner wds Max count indicating not
+					 * locally capable
+					 */
+#define AB_WDS_TIMEOUT_MIN	1	/* afterburner wds, use zero count as indicating
+					 * "downrev"
+					 */
+
+/* EWC definitions */
+#define MCSSET_LEN	16	/* 16-bits per 8-bit set to give 128-bits bitmap of MCS Index */
+#define MAX_MCS_NUM	(128)	/* max mcs number = 128 */
+
+struct ewc_cap_ie {
+	uint16	cap;
+	uint8	params;
+	uint8	supp_mcs[MCSSET_LEN];
+	uint16	ext_htcap;
+	uint32	txbf_cap;
+	uint8	as_cap;
+} PACKED;
+typedef struct ewc_cap_ie ewc_cap_ie_t;
+
+/* CAP IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
+/* the capability IE is primarily used to convey this nodes abilities */
+struct ewc_prop_cap_ie {
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];		/* Proprietary OUI, BRCM_PROP_OUI */
+	uint8	type;           /* type inidicates what follows */
+	ewc_cap_ie_t cap_ie;
+} PACKED;
+typedef struct ewc_prop_cap_ie ewc_prop_cap_ie_t;
+#define EWC_PROP_IE_OVERHEAD	4	/* overhead bytes for prop oui ie */
+#define EWC_CAP_IE_LEN	26	
+#define EWC_CAP_IE_TYPE	51      
+
+#define EWC_CAP_LDPC_CODING	0x0001	/* Support for rx of LDPC coded pkts */
+#define EWC_CAP_40MHZ		0x0002  /* FALSE:20Mhz, TRUE:20/40MHZ supported */
+#define EWC_CAP_MIMO_PS_MASK	0x000C  /* Mimo PS mask */
+#define EWC_CAP_MIMO_PS_SHIFT	0x0002	/* Mimo PS shift */
+#define EWC_CAP_MIMO_PS_OFF	0x0003	/* Mimo PS, no restriction */
+#define EWC_CAP_MIMO_PS_RTS	0x0001	/* Mimo PS, send RTS/CTS around MIMO frames */
+#define EWC_CAP_MIMO_PS_ON	0x0000	/* Mimo PS, MIMO disallowed */
+#define EWC_CAP_GF		0x0010	/* Greenfield preamble support */
+#define EWC_CAP_SHORT_GI_20	0x0020	/* 20MHZ short guard interval support */
+#define EWC_CAP_SHORT_GI_40	0x0040	/* 40Mhz short guard interval support */
+#define EWC_CAP_TX_STBC		0x0080	/* Tx STBC support */
+#define EWC_CAP_RX_STBC_MASK	0x0300	/* Rx STBC mask */
+#define EWC_CAP_RX_STBC_SHIFT	8	/* Rx STBC shift */
+#define EWC_CAP_DELAYED_BA	0x0400	/* delayed BA support */
+#define EWC_CAP_MAX_AMSDU	0x0800	/* Max AMSDU size in bytes , 0=3839, 1=7935 */
+#define EWC_CAP_DSSS_CCK	0x1000	/* DSSS/CCK supported by the BSS */
+#define EWC_CAP_PSMP		0x2000	/* Power Save Multi Poll support */
+#define EWC_CAP_40MHZ_INTOLERANT 0x4000	/* 40MHz Intolerant */
+#define EWC_CAP_LSIG_TXOP	0x8000	/* L-SIG TXOP protection support */
+
+#define EWC_CAP_RX_STBC_NO		0x0	/* no rx STBC support */
+#define EWC_CAP_RX_STBC_ONE_STREAM	0x1	/* rx STBC support of 1 spatial stream */
+#define EWC_CAP_RX_STBC_TWO_STREAM	0x2	/* rx STBC support of 1-2 spatial streams */
+#define EWC_CAP_RX_STBC_THREE_STREAM	0x3	/* rx STBC support of 1-3 spatial streams */
+
+#define EWC_MAX_AMSDU		7935	/* max amsdu size (bytes) per the EWC spec */
+#define EWC_MIN_AMSDU		3835	/* min amsdu size (bytes) per the EWC spec */
+
+#define EWC_PARAMS_RX_FACTOR_MASK	0x03	/* ampdu rcv factor mask */
+#define EWC_PARAMS_DENSITY_MASK		0x1C	/* ampdu density mask */
+#define EWC_PARAMS_DENSITY_SHIFT	2	/* ampdu density shift */
+
+/* EWC/AMPDU specific define */
+#define AMPDU_MAX_MPDU_DENSITY	7	/* max mpdu density; in 1/8 usec units */
+#define AMPDU_MAX_RX_FACTOR	3	/* max rcv ampdu len (64kb) */
+#define AMPDU_RX_FACTOR_BASE	8*1024	/* ampdu factor base for rx len */
+#define AMPDU_DELIMITER_LEN	4	/* length of ampdu delimiter */
+
+struct ewc_add_ie {
+	uint8	ctl_ch;			/* control channel number */
+	uint8	byte1;			/* ext ch,rec. ch. width, RIFS support */
+	uint16	opmode;			/* operation mode */
+	uint16	misc_bits;		/* misc bits */
+	uint8	basic_mcs[MCSSET_LEN];  /* required MCS set */
+} PACKED;
+typedef struct ewc_add_ie ewc_add_ie_t;
+
+/* ADD IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
+/* the additional IE is primarily used to convey the current BSS configuration */
+struct ewc_prop_add_ie {
+	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
+	uint8	len;		/* IE length */
+	uint8	oui[3];		/* Proprietary OUI, BRCM_PROP_OUI */
+	uint8	type;		/* indicates what follows */
+	ewc_add_ie_t add_ie;
+} PACKED;
+typedef struct ewc_prop_add_ie ewc_prop_add_ie_t;
+
+#define EWC_ADD_IE_LEN	22	
+#define EWC_ADD_IE_TYPE	52	
+
+/* byte1 defn's */
+#define EWC_BW_ANY		0x04	/* set, STA can use 20 or 40MHz */
+#define EWC_RIFS_PERMITTED     	0x08	/* RIFS allowed */
+
+/* opmode defn's */
+#define EWC_OPMODE_MASK	        0x0003	/* protection mode mask */
+#define EWC_OPMODE_SHIFT	0	/* protection mode shift */
+#define EWC_OPMODE_PURE		0x0000	/* protection mode PURE */
+#define EWC_OPMODE_OPTIONAL	0x0001	/* protection mode optional */
+#define EWC_OPMODE_HT20IN40	0x0002	/* protection mode 20MHz HT in 40MHz BSS */
+#define EWC_OPMODE_MIXED	0x0003	/* protection mode Mixed Mode */
+#define EWC_OPMODE_NONGF	0x0004	/* protection mode non-GF */
+#define DOT11N_TXBURST		0x0008	/* Tx burst limit */
+#define DOT11N_OBSS_NONHT	0x0010	/* OBSS Non-HT STA present */
+
+/* misc_bites defn's */
+#define EWC_BASIC_STBC_MCS	0x007f	/* basic STBC MCS */
+#define EWC_DUAL_STBC_PROT	0x0080	/* Dual STBC Protection */
+#define EWC_SECOND_BCN		0x0100	/* Secondary beacon support */
+#define EWC_LSIG_TXOP		0x0200	/* L-SIG TXOP Protection full support */
+#define EWC_PCO_ACTIVE		0x0400	/* PCO active */
+#define EWC_PCO_PHASE		0x0800	/* PCO phase */
+
+/* Tx Burst Limits */
+#define DOT11N_2G_TXBURST_LIMIT	6160	/* 2G band Tx burst limit per 802.11n Draft 1.10 (usec) */
+#define DOT11N_5G_TXBURST_LIMIT	3080	/* 5G band Tx burst limit per 802.11n Draft 1.10 (usec) */
+
+/* Macros for opmode */
+#define GET_EWC_OPMODE(add_ie)		((ltoh16_ua(&add_ie->opmode) & EWC_OPMODE_MASK) \
+					>> EWC_OPMODE_SHIFT)
+#define EWC_MIXEDMODE_PRESENT(add_ie)	((ltoh16_ua(&add_ie->opmode) & EWC_OPMODE_MASK) \
+					== EWC_OPMODE_MIXED)	/* mixed mode present */
+#define EWC_HT20_PRESENT(add_ie)	((ltoh16_ua(&add_ie->opmode) & EWC_OPMODE_MASK) \
+					== EWC_OPMODE_HT20IN40)	/* 20MHz HT present */
+#define EWC_OPTIONAL_PRESENT(add_ie)	((ltoh16_ua(&add_ie->opmode) & EWC_OPMODE_MASK) \
+					== EWC_OPMODE_OPTIONAL)	/* Optional protection present */
+#define EWC_USE_PROTECTION(add_ie)	(EWC_HT20_PRESENT((add_ie)) || \
+					EWC_MIXEDMODE_PRESENT((add_ie))) /* use protection */
+#define EWC_NONGF_PRESENT(add_ie)	((ltoh16_ua(&add_ie->opmode) & EWC_OPMODE_NONGF) \
+					== EWC_OPMODE_NONGF)	/* non-GF present */
+#define DOT11N_TXBURST_PRESENT(add_ie)	((ltoh16_ua(&add_ie->opmode) & DOT11N_TXBURST) \
+					== DOT11N_TXBURST)	/* Tx Burst present */
+#define DOT11N_OBSS_NONHT_PRESENT(add_ie)	((ltoh16_ua(&add_ie->opmode) & DOT11N_OBSS_NONHT) \
+					== DOT11N_OBSS_NONHT)	/* OBSS Non-HT present */
+
+/* Vendor IE structure */
+struct vndr_ie {
+	uchar id;
+	uchar len;
+	uchar oui [3];
+	uchar data [1]; 	/* Variable size data */
+} PACKED;
+typedef struct vndr_ie vndr_ie_t;
+
+#define VNDR_IE_HDR_LEN		2	/* id + len field */
+#define VNDR_IE_MIN_LEN		3	/* size of the oui field */
+#define VNDR_IE_MAX_LEN		256	/* verdor IE max length */
+
+/* WPA definitions */
+#define WPA_VERSION		1	/* WPA version */
+#define WPA_OUI			"\x00\x50\xF2"	/* WPA OUI */
+
+#define WPA2_VERSION		1	/* WPA2 version */
+#define WPA2_VERSION_LEN	2	/* WAP2 version length */
+#define WPA2_OUI		"\x00\x0F\xAC"	/* WPA2 OUI */
+
+#define WPA_OUI_LEN	3	/* WPA OUI length */
+
+/* RSN authenticated key managment suite */
+#define RSN_AKM_NONE		0	/* None (IBSS) */
+#define RSN_AKM_UNSPECIFIED	1	/* Over 802.1x */
+#define RSN_AKM_PSK		2	/* Pre-shared Key */
+
+/* Key related defines */
+#define DOT11_MAX_DEFAULT_KEYS	4	/* number of default keys */
+#define DOT11_MAX_KEY_SIZE	32	/* max size of any key */
+#define DOT11_MAX_IV_SIZE	16	/* max size of any IV */
+#define DOT11_EXT_IV_FLAG	(1<<5)	/* flag to indicate IV is > 4 bytes */
+
+#define WEP1_KEY_SIZE		5	/* max size of any WEP key */
+#define WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
+#define WEP128_KEY_SIZE		13	/* max size of any WEP key */
+#define WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
+#define TKIP_MIC_SIZE		8	/* size of TKIP MIC */
+#define TKIP_EOM_SIZE		7	/* max size of TKIP EOM */
+#define TKIP_EOM_FLAG		0x5a	/* TKIP EOM flag byte */
+#define TKIP_KEY_SIZE		32	/* size of any TKIP key */
+#define TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
+#define TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
+#define TKIP_MIC_SUP_RX		TKIP_MIC_AUTH_TX	/* offset to Supplicant MIC RX key */
+#define TKIP_MIC_SUP_TX		TKIP_MIC_AUTH_RX	/* offset to Supplicant MIC TX key */
+#define AES_KEY_SIZE		16	/* size of AES key */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _802_11_H_ */
diff --git a/package/broadcom-57xx/src/proto/802.11e.h b/package/broadcom-57xx/src/proto/802.11e.h
new file mode 100644
index 0000000000..278ab9c8c5
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/802.11e.h
@@ -0,0 +1,123 @@
+/*
+ * 802.11e protocol header file
+ *
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: 802.11e.h,v 1.1.1.2 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _802_11e_H_
+#define _802_11e_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#ifdef BCMDBG
+extern const char *aci_names[];
+#endif /* BCMDBG */
+
+/* WME Traffic Specification (TSPEC) element */
+#define WME_TSPEC_HDR_LEN           2           /* WME TSPEC header length */
+#define WME_TSPEC_BODY_OFF          2           /* WME TSPEC body offset */
+
+#define WME_CATEGORY_CODE_OFFSET	0		/* WME Category code offset */
+#define WME_ACTION_CODE_OFFSET		1		/* WME Action code offset */
+#define WME_TOKEN_CODE_OFFSET		2		/* WME Token code offset */
+#define WME_STATUS_CODE_OFFSET		3		/* WME Status code offset */
+
+struct tsinfo {
+	uint8 octets[3];
+} PACKED;
+
+typedef struct tsinfo tsinfo_t;
+
+/* 802.11e TSPEC IE */
+typedef struct tspec {
+	uint8 oui[DOT11_OUI_LEN];	/* WME_OUI */
+	uint8 type;					/* WME_TYPE */
+	uint8 subtype;				/* WME_SUBTYPE_TSPEC */
+	uint8 version;				/* WME_VERSION */
+	tsinfo_t tsinfo;			/* TS Info bit field */
+	uint16 nom_msdu_size;		/* (Nominal or fixed) MSDU Size (bytes) */
+	uint16 max_msdu_size;		/* Maximum MSDU Size (bytes) */
+	uint32 min_srv_interval;	/* Minimum Service Interval (us) */
+	uint32 max_srv_interval;	/* Maximum Service Interval (us) */
+	uint32 inactivity_interval;	/* Inactivity Interval (us) */
+	uint32 suspension_interval; /* Suspension Interval (us) */
+	uint32 srv_start_time;		/* Service Start Time (us) */
+	uint32 min_data_rate;		/* Minimum Data Rate (bps) */
+	uint32 mean_data_rate;		/* Mean Data Rate (bps) */
+	uint32 peak_data_rate;		/* Peak Data Rate (bps) */
+	uint32 max_burst_size;		/* Maximum Burst Size (bytes) */
+	uint32 delay_bound;			/* Delay Bound (us) */
+	uint32 min_phy_rate;		/* Minimum PHY Rate (bps) */
+	uint16 surplus_bw;			/* Surplus Bandwidth Allowance Factor */
+	uint16 medium_time;			/* Medium Time (32 us/s periods) */
+} PACKED tspec_t;
+
+#define WME_TSPEC_LEN	(sizeof(tspec_t))		/* not including 2-bytes of header */
+
+/* ts_info */
+/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
+#define TS_INFO_TID_SHIFT		1	/* TS info. TID shift */
+#define TS_INFO_TID_MASK		(0xf << TS_INFO_TID_SHIFT)	/* TS info. TID mask */
+#define TS_INFO_CONTENTION_SHIFT	7	/* TS info. contention shift */
+#define TS_INFO_CONTENTION_MASK	(0x1 << TS_INFO_CONTENTION_SHIFT) /* TS info. contention mask */
+#define TS_INFO_DIRECTION_SHIFT	5	/* TS info. direction shift */
+#define TS_INFO_DIRECTION_MASK	(0x3 << TS_INFO_DIRECTION_SHIFT) /* TS info. direction mask */
+#define TS_INFO_PSB_SHIFT		2		/* TS info. PSB bit Shift */
+#define TS_INFO_PSB_MASK		(1 << TS_INFO_PSB_SHIFT)	/* TS info. PSB mask */
+#define TS_INFO_UPLINK			(0 << TS_INFO_DIRECTION_SHIFT)	/* TS info. uplink */
+#define TS_INFO_DOWNLINK		(1 << TS_INFO_DIRECTION_SHIFT)	/* TS info. downlink */
+#define TS_INFO_BIDIRECTIONAL	(3 << TS_INFO_DIRECTION_SHIFT)	/* TS info. bidirectional */
+#define TS_INFO_USER_PRIO_SHIFT	3	/* TS info. user priority shift */
+/* TS info. user priority mask */
+#define TS_INFO_USER_PRIO_MASK	(0x7 << TS_INFO_USER_PRIO_SHIFT)
+
+/* Macro to get/set bit(s) field in TSINFO */
+#define WLC_CAC_GET_TID(pt)	((((pt).octets[0]) & TS_INFO_TID_MASK) >> TS_INFO_TID_SHIFT)
+#define WLC_CAC_GET_DIR(pt)	((((pt).octets[0]) & \
+	TS_INFO_DIRECTION_MASK) >> TS_INFO_DIRECTION_SHIFT)
+#define WLC_CAC_GET_PSB(pt)	((((pt).octets[1]) & WLC_CAC_PSB_MASK) >> WLC_CAC_PSB_SHIFT)
+#define WLC_CAC_GET_USER_PRIO(pt)	((((pt).octets[1]) & \
+	TS_INFO_USER_PRIO_MASK) >> TS_INFO_USER_PRIO_SHIFT)
+
+#define WLC_CAC_SET_TID(pt, id)	((((pt).octets[0]) & (~TS_INFO_TID_MASK)) | \
+	((id) << TS_INFO_TID_SHIFT))
+#define WLC_CAC_SET_USER_PRIO(pt, prio)	((((pt).octets[0]) & (~TS_INFO_USER_PRIO_MASK)) | \
+	((prio) << TS_INFO_USER_PRIO_SHIFT))
+
+/* 802.11e QBSS Load IE */
+#define QBSS_LOAD_IE_LEN		5	/* QBSS Load IE length */
+#define QBSS_LOAD_AAC_OFF		3	/* AAC offset in IE */
+
+#define CAC_ADDTS_RESP_TIMEOUT		300	/* default ADDTS response timeout in ms */
+
+/* 802.11e ADDTS status code */
+#define DOT11E_STATUS_ADMISSION_ACCEPTED	0	/* TSPEC Admission accepted status */
+#define DOT11E_STATUS_ADDTS_INVALID_PARAM	1	/* TSPEC invalid parameter status */
+#define DOT11E_STATUS_ADDTS_REFUSED_NSBW	3	/* ADDTS refused (non-sufficient BW) */
+
+/* 802.11e DELTS status code */
+#define DOT11E_STATUS_QSTA_LEAVE_QBSS		36	/* STA leave QBSS */
+#define DOT11E_STATUS_END_TS				37	/* END TS */
+#define DOT11E_STATUS_UNKNOWN_TS			38	/* UNKNOWN TS */
+#define DOT11E_STATUS_QSTA_REQ_TIMEOUT		39	/* STA ADDTS request timeout */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _802_11e_CAC_H_ */
diff --git a/package/broadcom-57xx/src/proto/802.1d.h b/package/broadcom-57xx/src/proto/802.1d.h
new file mode 100644
index 0000000000..831c43bf80
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/802.1d.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Fundamental types and constants relating to 802.1D
+ *
+ * $Id: 802.1d.h,v 1.1.1.2 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _802_1_D_
+#define _802_1_D_
+
+/* 802.1D priority defines */
+#define	PRIO_8021D_NONE		2	/* None = - */
+#define	PRIO_8021D_BK		1	/* BK - Background */
+#define	PRIO_8021D_BE		0	/* BE - Best-effort */
+#define	PRIO_8021D_EE		3	/* EE - Excellent-effort */
+#define	PRIO_8021D_CL		4	/* CL - Controlled Load */
+#define	PRIO_8021D_VI		5	/* Vi - Video */
+#define	PRIO_8021D_VO		6	/* Vo - Voice */
+#define	PRIO_8021D_NC		7	/* NC - Network Control */
+#define	MAXPRIO			7	/* 0-7 */
+#define NUMPRIO			(MAXPRIO + 1)
+
+#define ALLPRIO		-1	/* All prioirty */
+
+/* Converts prio to precedence since the numerical value of
+ * PRIO_8021D_BE and PRIO_8021D_NONE are swapped.
+ */
+#define PRIO2PREC(prio) \
+	(((prio) == PRIO_8021D_NONE || (prio) == PRIO_8021D_BE) ? ((prio^2)) : (prio))
+
+#endif /* _802_1_D__ */
diff --git a/package/broadcom-57xx/src/proto/802.3.h b/package/broadcom-57xx/src/proto/802.3.h
new file mode 100644
index 0000000000..493b60e3f8
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/802.3.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ *
+ * Fundamental constants relating to 802.3
+ *
+ * $Id: 802.3.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _802_3_h_
+#define _802_3_h_
+
+#define SNAP_HDR_LEN	6	/* 802.3 LLC/SNAP header length */
+
+#endif	/* #ifndef _802_3_h_ */
diff --git a/package/broadcom-57xx/src/proto/bcmarp.h b/package/broadcom-57xx/src/proto/bcmarp.h
new file mode 100644
index 0000000000..2e27ac1669
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmarp.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ *
+ * Fundamental constants relating to ARP Protocol
+ *
+ * $Id: bcmarp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _bcmarp_h_
+#define _bcmarp_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#define ARP_OPC_OFFSET		6		/* option code offset */
+#define ARP_SRC_ETH_OFFSET	8		/* src h/w address offset */
+#define ARP_SRC_IP_OFFSET	14		/* src IP address offset */
+#define ARP_TGT_ETH_OFFSET	18		/* target h/w address offset */
+#define ARP_TGT_IP_OFFSET	24		/* target IP address offset */
+
+#define ARP_OPC_REQUEST		1		/* ARP request */
+#define ARP_OPC_REPLY		2		/* ARP reply */
+
+#define ARP_DATA_LEN		28		/* ARP data length */
+
+struct bcmarp {
+	uint16	htype;				/* Header type (1 = ethernet) */
+	uint16	ptype;				/* Protocol type (0x800 = IP) */
+	uint8	hlen;				/* Hardware address length (Eth = 6) */
+	uint8	plen;				/* Protocol address length (IP = 4) */
+	uint16	oper;				/* ARP_OPC_... */
+	uint8	src_eth[ETHER_ADDR_LEN];	/* Source hardware address */
+	uint8	src_ip[IPV4_ADDR_LEN];		/* Source protocol address (not aligned) */
+	uint8	dst_eth[ETHER_ADDR_LEN];	/* Destination hardware address */
+	uint8	dst_ip[IPV4_ADDR_LEN];		/* Destination protocol address */
+} PACKED;
+
+/* Ethernet header + Arp message */
+struct bcmetharp {
+	struct ether_header	eh;
+	struct bcmarp	arp;
+} PACKED;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif	/* !defined(_bcmarp_h_) */
diff --git a/package/broadcom-57xx/src/proto/bcmdhcp.h b/package/broadcom-57xx/src/proto/bcmdhcp.h
new file mode 100644
index 0000000000..f92a69b362
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmdhcp.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ *
+ * Fundamental constants relating to DHCP Protocol
+ *
+ * $Id: bcmdhcp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _bcmdhcp_h_
+#define _bcmdhcp_h_
+
+/* DHCP params */
+#define DHCP_TYPE_OFFSET	0	/* DHCP type (request|reply) offset */
+#define DHCP_FLAGS_OFFSET	10	/* DHCP flags offset */
+#define DHCP_CIADDR_OFFSET	12	/* DHCP client IP address offset */
+#define DHCP_YIADDR_OFFSET	16	/* DHCP your IP address offset */
+#define DHCP_GIADDR_OFFSET	24	/* DHCP relay agent IP address offset */
+#define DHCP_CHADDR_OFFSET	28	/* DHCP client h/w address offset */
+
+#define DHCP_TYPE_REQUEST	1	/* DHCP request (discover|request) */
+#define DHCP_TYPE_REPLY		2	/* DHCP reply (offset|ack) */
+
+#define DHCP_PORT_SERVER	67	/* DHCP server UDP port */
+#define DHCP_PORT_CLIENT	68	/* DHCP client UDP port */
+
+#define DHCP_FLAG_BCAST	0x8000	/* DHCP broadcast flag */
+
+#define DHCP_FLAGS_LEN	2	/* DHCP flags field length */
+
+#endif	/* #ifndef _bcmdhcp_h_ */
diff --git a/package/broadcom-57xx/src/proto/bcmeth.h b/package/broadcom-57xx/src/proto/bcmeth.h
new file mode 100644
index 0000000000..fffce6e7b5
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmeth.h
@@ -0,0 +1,101 @@
+/*
+ * Broadcom Ethernettype  protocol definitions
+ *
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: bcmeth.h,v 1.1.1.5 2007/05/31 08:00:41 michael Exp $
+ */
+
+/*
+ * Broadcom Ethernet protocol defines
+ */
+
+#ifndef _BCMETH_H_
+#define _BCMETH_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/* ETHER_TYPE_BRCM is defined in ethernet.h */
+
+/*
+ * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
+ * in one of two formats: (only subtypes 32768-65535 are in use now)
+ *
+ * subtypes 0-32767:
+ *     8 bit subtype (0-127)
+ *     8 bit length in bytes (0-255)
+ *
+ * subtypes 32768-65535:
+ *     16 bit big-endian subtype
+ *     16 bit big-endian length in bytes (0-65535)
+ *
+ * length is the number of additional bytes beyond the 4 or 6 byte header
+ *
+ * Reserved values:
+ * 0 reserved
+ * 5-15 reserved for iLine protocol assignments
+ * 17-126 reserved, assignable
+ * 127 reserved
+ * 32768 reserved
+ * 32769-65534 reserved, assignable
+ * 65535 reserved
+ */
+
+/* 
+ * While adding the subtypes and their specific processing code make sure
+ * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition
+ */
+
+#define	BCMILCP_SUBTYPE_RATE		1
+#define	BCMILCP_SUBTYPE_LINK		2
+#define	BCMILCP_SUBTYPE_CSA		3
+#define	BCMILCP_SUBTYPE_LARQ		4
+#define BCMILCP_SUBTYPE_VENDOR		5
+#define	BCMILCP_SUBTYPE_FLH		17
+
+#define BCMILCP_SUBTYPE_VENDOR_LONG	32769
+#define BCMILCP_SUBTYPE_CERT		32770
+#define BCMILCP_SUBTYPE_SES		32771
+
+
+#define BCMILCP_BCM_SUBTYPE_RESERVED	0
+#define BCMILCP_BCM_SUBTYPE_EVENT		1
+#define BCMILCP_BCM_SUBTYPE_SES			2
+/*
+ * The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
+ * within BCMILCP_BCM_SUBTYPE_EVENT type messages
+ */
+/* #define BCMILCP_BCM_SUBTYPE_EAPOL		3 */
+
+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH	8
+#define BCMILCP_BCM_SUBTYPEHDR_VERSION		0
+
+/* These fields are stored in network order */
+typedef  struct bcmeth_hdr
+{
+	uint16	subtype;	/* Vendor specific..32769 */
+	uint16	length;
+	uint8	version;	/* Version is 0 */
+	uint8	oui[3];		/* Broadcom OUI */
+	/* user specific Data */
+	uint16	usr_subtype;
+} PACKED bcmeth_hdr_t;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif	/*  _BCMETH_H_ */
diff --git a/package/broadcom-57xx/src/proto/bcmevent.h b/package/broadcom-57xx/src/proto/bcmevent.h
new file mode 100644
index 0000000000..e862763762
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmevent.h
@@ -0,0 +1,166 @@
+/*
+ * Broadcom Event  protocol definitions
+ *
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ *
+ * Dependencies: proto/bcmeth.h
+ *
+ * $Id: bcmevent.h,v 1.1.1.11 2007/05/31 08:00:41 michael Exp $
+ *
+ */
+
+/*
+ * Broadcom Ethernet Events protocol defines
+ *
+ */
+
+#ifndef _BCMEVENT_H_
+#define _BCMEVENT_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif /* defined(__GNUC__) */
+
+#define BCM_EVENT_MSG_VERSION		1	/* wl_event_msg_t struct version */
+#define BCM_MSG_IFNAME_MAX		16	/* max length of interface name */
+
+/* flags */
+#define WLC_EVENT_MSG_LINK		0x01	/* link is up */
+#define WLC_EVENT_MSG_FLUSHTXQ		0x02	/* flush tx queue on MIC error */
+#define WLC_EVENT_MSG_GROUP		0x04	/* group MIC error */
+
+/* these fields are stored in network order */
+typedef struct
+{
+	uint16	version;
+	uint16	flags;			/* see flags below */
+	uint32	event_type;		/* Message (see below) */
+	uint32	status;			/* Status code (see below) */
+	uint32	reason;			/* Reason code (if applicable) */
+	uint32	auth_type;		/* WLC_E_AUTH */
+	uint32	datalen;		/* data buf */
+	struct ether_addr	addr;	/* Station address (if applicable) */
+	char	ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
+} PACKED wl_event_msg_t;
+
+/* used by driver msgs */
+typedef struct bcm_event {
+	struct ether_header eth;
+	bcmeth_hdr_t		bcm_hdr;
+	wl_event_msg_t		event;
+	/* data portion follows */
+} PACKED bcm_event_t;
+
+#define BCM_MSG_LEN	(sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
+
+/* Event messages */
+#define WLC_E_SET_SSID		0	/* indicates status of set SSID */
+#define WLC_E_JOIN		1	/* differentiates join IBSS from found (WLC_E_START) IBSS */
+#define WLC_E_START		2	/* STA founded an IBSS or AP started a BSS */
+#define WLC_E_AUTH		3	/* 802.11 AUTH request */
+#define WLC_E_AUTH_IND		4	/* 802.11 AUTH indication */
+#define WLC_E_DEAUTH		5	/* 802.11 DEAUTH request */
+#define WLC_E_DEAUTH_IND	6	/* 802.11 DEAUTH indication */
+#define WLC_E_ASSOC		7	/* 802.11 ASSOC request */
+#define WLC_E_ASSOC_IND		8	/* 802.11 ASSOC indication */
+#define WLC_E_REASSOC		9	/* 802.11 REASSOC request */
+#define WLC_E_REASSOC_IND	10	/* 802.11 REASSOC indication */
+#define WLC_E_DISASSOC		11	/* 802.11 DISASSOC request */
+#define WLC_E_DISASSOC_IND	12	/* 802.11 DISASSOC indication */
+#define WLC_E_QUIET_START	13	/* 802.11h Quiet period started */
+#define WLC_E_QUIET_END		14	/* 802.11h Quiet period ended */
+#define WLC_E_BEACON_RX		15	/* BEACONS received/lost indication */
+#define WLC_E_LINK		16	/* generic link indication */
+#define WLC_E_MIC_ERROR		17	/* TKIP MIC error occurred */
+#define WLC_E_NDIS_LINK		18	/* NDIS style link indication */
+#define WLC_E_ROAM		19	/* roam attempt occurred: indicate status & reason */
+#define WLC_E_TXFAIL		20	/* change in dot11FailedCount (txfail) */
+#define WLC_E_PMKID_CACHE	21	/* WPA2 pmkid cache indication */
+#define WLC_E_RETROGRADE_TSF	22	/* current AP's TSF value went backward */
+#define WLC_E_PRUNE		23	/* AP was pruned from join list for reason */
+#define WLC_E_AUTOAUTH		24	/* report AutoAuth table entry match for join attempt */
+#define WLC_E_EAPOL_MSG		25	/* Event encapsulating an EAPOL message */
+#define WLC_E_SCAN_COMPLETE	26	/* Scan results are ready or scan was aborted */
+#define WLC_E_ADDTS_IND		27	/* indicate to host addts fail/success */
+#define WLC_E_DELTS_IND		28	/* indicate to host delts fail/success */
+#define WLC_E_BCNSENT_IND	29	/* indicate to host of beacon transmit */
+#define WLC_E_BCNRX_MSG		30	/* Send the received beacon up to the host */
+#define WLC_E_BCNLOST_MSG	31	/* indicate to host loss of beacon */
+#define WLC_E_ROAM_PREP		32	/* before attempting to roam */
+#define WLC_E_PFN_NET_FOUND	33	/* PFN network found event */
+#define WLC_E_PFN_NET_LOST	34	/* PFN network lost event */
+
+#ifdef EXT_STA
+#define WLC_E_RESET_COMPLETE	35
+#define WLC_E_JOIN_START	36
+#define WLC_E_ROAM_START	37
+#define WLC_E_ASSOC_START	38
+#define WLC_E_IBSS_ASSOC	39
+#define WLC_E_RADIO		40
+#define WLC_E_LAST		41 /* highest val + 1 for range checking */
+#else /* EXT_STA */
+#define WLC_E_LAST		35	/* highest val + 1 for range checking */
+#endif /* EXT_STA */
+
+/* Event status codes */
+#define WLC_E_STATUS_SUCCESS		0	/* operation was successful */
+#define WLC_E_STATUS_FAIL		1	/* operation failed */
+#define WLC_E_STATUS_TIMEOUT		2	/* operation timed out */
+#define WLC_E_STATUS_NO_NETWORKS	3	/* failed due to no matching network found */
+#define WLC_E_STATUS_ABORT		4	/* operation was aborted */
+#define WLC_E_STATUS_NO_ACK		5	/* protocol failure: packet not ack'd */
+#define WLC_E_STATUS_UNSOLICITED	6	/* AUTH or ASSOC packet was unsolicited */
+#define WLC_E_STATUS_ATTEMPT		7	/* attempt to assoc to an auto auth configuration */
+#define WLC_E_STATUS_PARTIAL		8	/* scan results are incomplete */
+#define WLC_E_STATUS_NEWSCAN	9	/* scan aborted by another scan */
+#define WLC_E_STATUS_NEWASSOC	10	/* scan aborted due to assoc in progress */
+#define WLC_E_STATUS_11HQUIET	11	/* 802.11h quiet period started */
+#define WLC_E_STATUS_SUPPRESS	12	/* user disabled scanning (WLC_SET_SCANSUPPRESS) */
+#define WLC_E_STATUS_NOCHANS	13	/* no allowable channels to scan */
+#define WLC_E_STATUS_CCXFASTRM	14	/* scan aborted due to CCX fast roam */
+
+/* roam reason codes */
+#define WLC_E_REASON_INITIAL_ASSOC	0	/* initial assoc */
+#define WLC_E_REASON_LOW_RSSI		1	/* roamed due to low RSSI */
+#define WLC_E_REASON_DEAUTH		2	/* roamed due to DEAUTH indication */
+#define WLC_E_REASON_DISASSOC		3	/* roamed due to DISASSOC indication */
+#define WLC_E_REASON_BCNS_LOST		4	/* roamed due to lost beacons */
+#define WLC_E_REASON_FAST_ROAM_FAILED	5	/* roamed due to fast roam failure */
+#define WLC_E_REASON_DIRECTED_ROAM	6	/* roamed due to request by AP */
+#define WLC_E_REASON_TSPEC_REJECTED	7	/* roamed due to TSPEC rejection */
+#define WLC_E_REASON_BETTER_AP		8	/* roamed due to finding better AP */
+
+/* prune reason codes */
+#define WLC_E_PRUNE_ENCR_MISMATCH	1	/* encryption mismatch */
+#define WLC_E_PRUNE_BCAST_BSSID		2	/* AP uses a broadcast BSSID */
+#define WLC_E_PRUNE_MAC_DENY		3	/* STA's MAC addr is in AP's MAC deny list */
+#define WLC_E_PRUNE_MAC_NA		4	/* STA's MAC addr is not in AP's MAC allow list */
+#define WLC_E_PRUNE_REG_PASSV		5	/* AP not allowed due to regulatory restriction */
+#define WLC_E_PRUNE_SPCT_MGMT		6	/* AP does not support STA locale spectrum mgmt */
+#define WLC_E_PRUNE_RADAR		7	/* AP is on a radar channel of STA locale */
+#define WLC_E_RSN_MISMATCH		8	/* STA does not support AP's RSN */
+#define WLC_E_PRUNE_NO_COMMON_RATES	9	/* No rates in common with AP */
+#define WLC_E_PRUNE_BASIC_RATES		10	/* STA does not support all basic rates of BSS */
+#define WLC_E_PRUNE_CIPHER_NA		12	/* BSS's cipher not supported */
+#define WLC_E_PRUNE_KNOWN_STA		13	/* AP is already known to us as a STA */
+#define WLC_E_PRUNE_WDS_PEER		15	/* AP is already known to us as a WDS peer */
+#define WLC_E_PRUNE_QBSS_LOAD		16	/* QBSS LOAD - AAC is too low */
+#define WLC_E_PRUNE_HOME_AP		17	/* prune home AP */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif /* PACKED */
+
+#endif /* _BCMEVENT_H_ */
diff --git a/package/broadcom-57xx/src/proto/bcmip.h b/package/broadcom-57xx/src/proto/bcmip.h
new file mode 100644
index 0000000000..11f63f3208
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmip.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Fundamental constants relating to IP Protocol
+ *
+ * $Id: bcmip.h,v 1.1.1.4 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _bcmip_h_
+#define _bcmip_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+
+/* IPV4 and IPV6 common */
+#define IP_VER_OFFSET		0x0	/* offset to version field */
+#define IP_VER_MASK		0xf0	/* version mask */
+#define IP_VER_SHIFT		4	/* version shift */
+#define IP_VER_4		4	/* version number for IPV4 */
+#define IP_VER_6		6	/* version number for IPV6 */
+
+#define IP_VER(ip_body) \
+	((((uint8 *)(ip_body))[IP_VER_OFFSET] & IP_VER_MASK) >> IP_VER_SHIFT)
+
+#define IP_PROT_ICMP		0x1	/* ICMP protocol */
+#define IP_PROT_TCP		0x6	/* TCP protocol */
+#define IP_PROT_UDP		0x11	/* UDP protocol type */
+
+/* IPV4 field offsets */
+#define IPV4_VER_HL_OFFSET	0	/* version and ihl byte offset */
+#define IPV4_TOS_OFFSET		1	/* type of service offset */
+#define IPV4_PKTLEN_OFFSET	2	/* packet length offset */
+#define IPV4_PKTFLAG_OFFSET	6	/* more-frag,dont-frag flag offset */
+#define IPV4_PROT_OFFSET	9	/* protocol type offset */
+#define IPV4_CHKSUM_OFFSET	10	/* IP header checksum offset */
+#define IPV4_SRC_IP_OFFSET	12	/* src IP addr offset */
+#define IPV4_DEST_IP_OFFSET	16	/* dest IP addr offset */
+#define IPV4_OPTIONS_OFFSET	20	/* IP options offset */
+
+/* IPV4 field decodes */
+#define IPV4_VER_MASK		0xf0	/* IPV4 version mask */
+#define IPV4_VER_SHIFT		4	/* IPV4 version shift */
+
+#define IPV4_HLEN_MASK		0x0f	/* IPV4 header length mask */
+#define IPV4_HLEN(ipv4_body)	(4 * (((uint8 *)(ipv4_body))[IPV4_VER_HL_OFFSET] & IPV4_HLEN_MASK))
+
+#define IPV4_ADDR_LEN		4	/* IPV4 address length */
+
+#define IPV4_ADDR_NULL(a)	((((uint8 *)(a))[0] | ((uint8 *)(a))[1] | \
+				  ((uint8 *)(a))[2] | ((uint8 *)(a))[3]) == 0)
+
+#define IPV4_ADDR_BCAST(a)	((((uint8 *)(a))[0] & ((uint8 *)(a))[1] & \
+				  ((uint8 *)(a))[2] & ((uint8 *)(a))[3]) == 0xff)
+
+#define	IPV4_TOS_DSCP_MASK	0xfc	/* DiffServ codepoint mask */
+#define	IPV4_TOS_DSCP_SHIFT	2	/* DiffServ codepoint shift */
+
+#define	IPV4_TOS(ipv4_body)	(((uint8 *)(ipv4_body))[IPV4_TOS_OFFSET])
+
+#define	IPV4_TOS_PREC_MASK	0xe0	/* Historical precedence mask */
+#define	IPV4_TOS_PREC_SHIFT	5	/* Historical precedence shift */
+
+#define IPV4_TOS_LOWDELAY	0x10	/* Lowest delay requested */
+#define IPV4_TOS_THROUGHPUT	0x8	/* Best throughput requested */
+#define IPV4_TOS_RELIABILITY	0x4	/* Most reliable delivery requested */
+
+#define IPV4_PROT(ipv4_body)	(((uint8 *)(ipv4_body))[IPV4_PROT_OFFSET])
+
+#define IPV4_FRAG_RESV		0x8000	/* Reserved */
+#define IPV4_FRAG_DONT		0x4000	/* Don't fragment */
+#define IPV4_FRAG_MORE		0x2000	/* More fragments */
+#define IPV4_FRAG_OFFSET_MASK	0x1fff	/* Fragment offset */
+
+#define IPV4_ADDR_STR_LEN	16	/* Max IP address length in string format */
+
+/* IPv4, no options only.  */
+#define IPV4_NO_OPTIONS_HDR_LEN 20
+#define IPV4_NO_OPTIONS_PAYLOAD(ip_hdr)    (&(((uint8 *)(ip_hdr))[IPV4_NO_OPTIONS_HDR_LEN]))
+
+#define IPV4_PAYLOAD_LEN(ip_body) \
+	(((int)(((uint8 *)(ip_body))[IPV4_PKTLEN_OFFSET + 0]) << 8) | \
+	 ((uint8 *)(ip_body))[IPV4_PKTLEN_OFFSET + 1])
+
+/* IPV4 packet formats */
+struct ipv4_addr {
+	uint8	addr[IPV4_ADDR_LEN];
+} PACKED;
+
+struct ipv4_hdr {
+	uint8	version_ihl;		/* Version and Internet Header Length */
+	uint8	tos;			/* Type Of Service */
+	uint16	tot_len;		/* Number of bytes in packet (max 65535) */
+	uint16	id;
+	uint16	frag;			/* 3 flag bits and fragment offset */
+	uint8	ttl;			/* Time To Live */
+	uint8	prot;			/* Protocol */
+	uint16	hdr_chksum;		/* IP header checksum */
+	uint8	src_ip[IPV4_ADDR_LEN];	/* Source IP Address */
+	uint8	dst_ip[IPV4_ADDR_LEN];	/* Destination IP Address */
+} PACKED;
+
+/* IPV6 field offsets */
+#define IPV6_PAYLOAD_LEN_OFFSET	4	/* payload length offset */
+#define IPV6_NEXT_HDR_OFFSET	6	/* next header/protocol offset */
+#define IPV6_HOP_LIMIT_OFFSET	7	/* hop limit offset */
+#define IPV6_SRC_IP_OFFSET	8	/* src IP addr offset */
+#define IPV6_DEST_IP_OFFSET	24	/* dst IP addr offset */
+
+/* IPV6 field decodes */
+#define IPV6_TRAFFIC_CLASS(ipv6_body) \
+	(((((uint8 *)(ipv6_body))[0] & 0x0f) << 4) | \
+	 ((((uint8 *)(ipv6_body))[1] & 0xf0) >> 4))
+
+#define IPV6_FLOW_LABEL(ipv6_body) \
+	(((((uint8 *)(ipv6_body))[1] & 0x0f) << 16) | \
+	 (((uint8 *)(ipv6_body))[2] << 8) | \
+	 (((uint8 *)(ipv6_body))[3]))
+
+#define IPV6_PAYLOAD_LEN(ipv6_body) \
+	((((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 0] << 8) | \
+	 ((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 1])
+
+#define IPV6_NEXT_HDR(ipv6_body) \
+	(((uint8 *)(ipv6_body))[IPV6_NEXT_HDR_OFFSET])
+
+#define IPV6_PROT(ipv6_body)	IPV6_NEXT_HDR(ipv6_body)
+
+#define IPV6_ADDR_LEN		16	/* IPV6 address length */
+
+/* IPV4 TOS or IPV6 Traffic Classifier or 0 */
+#define IP_TOS(ip_body) \
+	(IP_VER(ip_body) == IP_VER_4 ? IPV4_TOS(ip_body) : \
+	 IP_VER(ip_body) == IP_VER_6 ? IPV6_TRAFFIC_CLASS(ip_body) : 0)
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif	/* _bcmip_h_ */
diff --git a/package/broadcom-57xx/src/proto/bcmtcp.h b/package/broadcom-57xx/src/proto/bcmtcp.h
new file mode 100644
index 0000000000..7e834a77b9
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmtcp.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Fundamental constants relating to TCP Protocol
+ *
+ * $Id: bcmtcp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _bcmtcp_h_
+#define _bcmtcp_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#define TCP_SRC_PORT_OFFSET	0	/* TCP source port offset */
+#define TCP_DEST_PORT_OFFSET	2	/* TCP dest port offset */
+#define TCP_CHKSUM_OFFSET	16	/* TCP body checksum offset */
+
+/* These fields are stored in network order */
+struct bcmtcp_hdr
+{
+	uint16	src_port;	/* Source Port Address */
+	uint16	dst_port;	/* Destination Port Address */
+	uint32	seq_num;	/* TCP Sequence Number */
+	uint32	ack_num;	/* TCP Sequence Number */
+	uint16	hdrlen_rsvd_flags;	/* Header length, reserved bits and flags */
+	uint16	tcpwin;		/* TCP window */
+	uint16	chksum;		/* Segment checksum with pseudoheader */
+	uint16	urg_ptr;	/* Points to seq-num of byte following urg data */
+} PACKED;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+/* Byte offset of flags in TCP header */
+#define TCP_FLAGS_OFFSET	13
+
+#define TCP_FLAGS_FIN		0x01
+#define TCP_FLAGS_SYN		0x02
+#define TCP_FLAGS_RST		0x03
+#define TCP_FLAGS_PSH		0x04
+#define TCP_FLAGS_ACK		0x10
+#define TCP_FLAGS_URG		0x20
+#define TCP_FLAGS_ECN		0x40
+#define TCP_FLAGS_CWR		0x80
+
+#define TCP_FLAGS(tcp_hdr)	(((uint8 *)(tcp_hdr))[TCP_FLAGS_OFFSET])
+#define TCP_IS_ACK(tcp_hdr)	(TCP_FLAGS(tcp_hdr) & TCP_FLAGS_ACK)
+
+#define TCP_SRC_PORT(tcp_hdr)	(ntoh16(((struct bcmtcp_hdr*)(tcp_hdr))->src_port))
+#define TCP_DST_PORT(tcp_hdr)	(ntoh16(((struct bcmtcp_hdr*)(tcp_hdr))->dst_port))
+#define TCP_SEQ_NUM(tcp_hdr)	(ntoh32(((struct bcmtcp_hdr*)(tcp_hdr))->seq_num))
+#define TCP_ACK_NUM(tcp_hdr)	(ntoh32(((struct bcmtcp_hdr*)(tcp_hdr))->ack_num))
+
+#endif	/* #ifndef _bcmtcp_h_ */
diff --git a/package/broadcom-57xx/src/proto/bcmudp.h b/package/broadcom-57xx/src/proto/bcmudp.h
new file mode 100644
index 0000000000..782f12e219
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/bcmudp.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.                
+ *                                     
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior      
+ * written permission of Broadcom Corporation.                            
+ *
+ * Fundamental constants relating to UDP Protocol
+ *
+ * $Id: bcmudp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _bcmudp_h_
+#define _bcmudp_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/* UDP header */
+#define UDP_DEST_PORT_OFFSET	2	/* UDP dest port offset */
+#define UDP_LEN_OFFSET		4	/* UDP length offset */
+#define UDP_CHKSUM_OFFSET	6	/* UDP body checksum offset */
+
+#define UDP_HDR_LEN	8	/* UDP header length */
+#define UDP_PORT_LEN	2	/* UDP port length */
+
+/* These fields are stored in network order */
+struct bcmudp_hdr
+{
+	uint16	src_port;	/* Source Port Address */
+	uint16	dst_port;	/* Destination Port Address */
+	uint16	len;		/* Number of bytes in datagram including header */
+	uint16	chksum;		/* entire datagram checksum with pseudoheader */
+} PACKED;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif	/* #ifndef _bcmudp_h_ */
diff --git a/package/broadcom-57xx/src/proto/eap.h b/package/broadcom-57xx/src/proto/eap.h
new file mode 100644
index 0000000000..36ed138769
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/eap.h
@@ -0,0 +1,45 @@
+/*
+ * Extensible Authentication Protocol (EAP) definitions
+ *
+ * See
+ * RFC 2284: PPP Extensible Authentication Protocol (EAP)
+ *
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * $Id: eap.h,v 1.2 2007/04/17 08:52:47 yogo Exp $
+ */
+
+#ifndef _eap_h_														
+#define _eap_h_
+
+/* EAP packet format */
+typedef struct {
+	unsigned char code;	/* EAP code */
+	unsigned char id;	/* Current request ID */
+	unsigned short length;	/* Length including header */
+	unsigned char type;	/* EAP type (optional) */
+	unsigned char data[1];	/* Type data (optional) */
+} eap_header_t;
+
+#define EAP_HEADER_LEN 4
+
+/* EAP codes */
+#define EAP_REQUEST	1
+#define EAP_RESPONSE	2
+#define EAP_SUCCESS	3
+#define EAP_FAILURE	4
+
+/* EAP types */
+#define EAP_IDENTITY		1
+#define EAP_NOTIFICATION	2
+#define EAP_NAK			3
+#define EAP_MD5			4
+#define EAP_OTP			5
+#define EAP_GTC			6
+#define EAP_TLS			13
+#define EAP_EXPANDED		254
+#define BCM_EAP_SES		10
+#define BCM_EAP_EXP_LEN		12  /* EAP_LEN 5 + 3 bytes for SMI ID + 4 bytes for ven type */
+#define BCM_SMI_ID		0x113d
+
+#endif /* _eap_h_ */
diff --git a/package/broadcom-57xx/src/proto/eapol.h b/package/broadcom-57xx/src/proto/eapol.h
new file mode 100644
index 0000000000..36bbe8155c
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/eapol.h
@@ -0,0 +1,179 @@
+/*
+ * 802.1x EAPOL definitions
+ *
+ * See
+ * IEEE Std 802.1X-2001
+ * IEEE 802.1X RADIUS Usage Guidelines
+ *
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * eapol.h,v 9.17 2004/12/13 22:36:09 davidm Exp
+ */
+
+#ifndef _eapol_h_
+#define _eapol_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#include <bcmcrypto/aeskeywrap.h>
+
+/* EAPOL for 802.3/Ethernet */
+typedef struct {
+	struct ether_header eth;	/* 802.3/Ethernet header */
+	unsigned char version;		/* EAPOL protocol version */
+	unsigned char type;		/* EAPOL type */
+	unsigned short length;		/* Length of body */
+	unsigned char body[1];		/* Body (optional) */
+} eapol_header_t;
+
+#define EAPOL_HEADER_LEN 18
+
+/* EAPOL version */
+#define WPA2_EAPOL_VERSION	2
+#define WPA_EAPOL_VERSION	1
+#define LEAP_EAPOL_VERSION	1
+#define SES_EAPOL_VERSION	1
+
+/* EAPOL types */
+#define EAP_PACKET		0
+#define EAPOL_START		1
+#define EAPOL_LOGOFF		2
+#define EAPOL_KEY		3
+#define EAPOL_ASF		4
+
+/* EAPOL-Key types */
+#define EAPOL_RC4_KEY		1
+#ifdef BCMWPA2
+#define EAPOL_WPA2_KEY		2	/* 802.11i/WPA2 */
+#endif
+#define EAPOL_WPA_KEY		254	/* WPA */
+
+/* RC4 EAPOL-Key header field sizes */
+#define EAPOL_KEY_REPLAY_LEN	8
+#define EAPOL_KEY_IV_LEN	16
+#define EAPOL_KEY_SIG_LEN	16
+
+/* RC4 EAPOL-Key */
+typedef struct {
+	unsigned char type;			/* Key Descriptor Type */
+	unsigned short length;			/* Key Length (unaligned) */
+	unsigned char replay[EAPOL_KEY_REPLAY_LEN];	/* Replay Counter */
+	unsigned char iv[EAPOL_KEY_IV_LEN];		/* Key IV */
+	unsigned char index;				/* Key Flags & Index */
+	unsigned char signature[EAPOL_KEY_SIG_LEN];	/* Key Signature */
+	unsigned char key[1];				/* Key (optional) */
+} PACKED eapol_key_header_t;
+
+#define EAPOL_KEY_HEADER_LEN 	44
+
+/* RC4 EAPOL-Key flags */
+#define EAPOL_KEY_FLAGS_MASK	0x80
+#define EAPOL_KEY_BROADCAST	0
+#define EAPOL_KEY_UNICAST	0x80
+
+/* RC4 EAPOL-Key index */
+#define EAPOL_KEY_INDEX_MASK	0x7f
+
+/* WPA/802.11i/WPA2 EAPOL-Key header field sizes */
+#define EAPOL_WPA_KEY_REPLAY_LEN	8
+#define EAPOL_WPA_KEY_NONCE_LEN		32
+#define EAPOL_WPA_KEY_IV_LEN		16
+#define EAPOL_WPA_KEY_RSC_LEN		8
+#define EAPOL_WPA_KEY_ID_LEN		8
+#define EAPOL_WPA_KEY_MIC_LEN		16
+#define EAPOL_WPA_KEY_DATA_LEN		(EAPOL_WPA_MAX_KEY_SIZE + AKW_BLOCK_LEN)
+#define EAPOL_WPA_MAX_KEY_SIZE		32
+
+/* WPA EAPOL-Key */
+typedef struct {
+	unsigned char type;		/* Key Descriptor Type */
+	unsigned short key_info;	/* Key Information (unaligned) */
+	unsigned short key_len;		/* Key Length (unaligned) */
+	unsigned char replay[EAPOL_WPA_KEY_REPLAY_LEN];	/* Replay Counter */
+	unsigned char nonce[EAPOL_WPA_KEY_NONCE_LEN];	/* Nonce */
+	unsigned char iv[EAPOL_WPA_KEY_IV_LEN];		/* Key IV */
+	unsigned char rsc[EAPOL_WPA_KEY_RSC_LEN];	/* Key RSC */
+	unsigned char id[EAPOL_WPA_KEY_ID_LEN];		/* WPA:Key ID, 802.11i/WPA2: Reserved */
+	unsigned char mic[EAPOL_WPA_KEY_MIC_LEN];	/* Key MIC */
+	unsigned short data_len;			/* Key Data Length */
+	unsigned char data[EAPOL_WPA_KEY_DATA_LEN];	/* Key data */
+} PACKED eapol_wpa_key_header_t;
+
+#define EAPOL_WPA_KEY_LEN 		95
+
+/* WPA/802.11i/WPA2 KEY KEY_INFO bits */
+#define WPA_KEY_DESC_V1		0x01
+#define WPA_KEY_DESC_V2		0x02
+#define WPA_KEY_PAIRWISE	0x08
+#define WPA_KEY_INSTALL		0x40
+#define WPA_KEY_ACK		0x80
+#define WPA_KEY_MIC		0x100
+#define WPA_KEY_SECURE		0x200
+#define WPA_KEY_ERROR		0x400
+#define WPA_KEY_REQ		0x800
+
+/* WPA-only KEY KEY_INFO bits */
+#define WPA_KEY_INDEX_0		0x00		
+#define WPA_KEY_INDEX_1		0x10
+#define WPA_KEY_INDEX_2		0x20
+#define WPA_KEY_INDEX_3		0x30
+#define WPA_KEY_INDEX_MASK	0x30
+#define WPA_KEY_INDEX_SHIFT	0x04
+
+#ifdef BCMWPA2
+/* 802.11i/WPA2-only KEY KEY_INFO bits */
+#define WPA_KEY_ENCRYPTED_DATA	0x1000
+
+/* Key Data encapsulation */
+typedef struct {
+	uint8 type;
+	uint8 length;
+	uint8 oui[3];
+	uint8 subtype;
+	uint8 data[1];
+} PACKED eapol_wpa2_encap_data_t;
+
+#define EAPOL_WPA2_ENCAP_DATA_HDR_LEN 	6
+
+#define WPA2_KEY_DATA_SUBTYPE_GTK	1	
+#define WPA2_KEY_DATA_SUBTYPE_STAKEY	2	
+#define WPA2_KEY_DATA_SUBTYPE_MAC	3	
+#define WPA2_KEY_DATA_SUBTYPE_PMKID	4	
+
+/* GTK encapsulation */
+typedef struct {
+	uint8	flags;
+	uint8	reserved;
+	uint8	gtk[EAPOL_WPA_MAX_KEY_SIZE];
+} PACKED eapol_wpa2_key_gtk_encap_t;
+
+#define EAPOL_WPA2_KEY_GTK_ENCAP_HDR_LEN 	2
+
+#define WPA2_GTK_INDEX_MASK	0x03
+#define WPA2_GTK_INDEX_SHIFT	0x00
+
+#define WPA2_GTK_TRANSMIT	0x04
+
+/* STAKey encapsulation */
+typedef struct {
+	uint8	reserved[2];
+	uint8	mac[ETHER_ADDR_LEN];
+	uint8	stakey[EAPOL_WPA_MAX_KEY_SIZE];
+} PACKED eapol_wpa2_key_stakey_encap_t;
+
+#define WPA2_KEY_DATA_PAD	0xdd
+
+#endif /* BCMWPA2 */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _eapol_h_ */
diff --git a/package/broadcom-57xx/src/proto/ethernet.h b/package/broadcom-57xx/src/proto/ethernet.h
new file mode 100644
index 0000000000..63430be5e2
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/ethernet.h
@@ -0,0 +1,173 @@
+/*
+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
+ *
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: ethernet.h,v 1.1.1.16 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _NET_ETHERNET_H_	    /* use native BSD ethernet.h when available */
+#define _NET_ETHERNET_H_
+
+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
+#endif
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/*
+ * The number of bytes in an ethernet (MAC) address.
+ */
+#define	ETHER_ADDR_LEN		6
+
+/*
+ * The number of bytes in the type field.
+ */
+#define	ETHER_TYPE_LEN		2
+
+/*
+ * The number of bytes in the trailing CRC field.
+ */
+#define	ETHER_CRC_LEN		4
+
+/*
+ * The length of the combined header.
+ */
+#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN)
+
+/*
+ * The minimum packet length.
+ */
+#define	ETHER_MIN_LEN		64
+
+/*
+ * The minimum packet user data length.
+ */
+#define	ETHER_MIN_DATA		46
+
+/*
+ * The maximum packet length.
+ */
+#define	ETHER_MAX_LEN		1518
+
+/*
+ * The maximum packet user data length.
+ */
+#define	ETHER_MAX_DATA		1500
+
+/* ether types */
+#define ETHER_TYPE_MIN		0x0600		/* Anything less than MIN is a length */
+#define	ETHER_TYPE_IP		0x0800		/* IP */
+#define ETHER_TYPE_ARP		0x0806		/* ARP */
+#define ETHER_TYPE_8021Q	0x8100		/* 802.1Q */
+#define	ETHER_TYPE_BRCM		0x886c		/* Broadcom Corp. */
+#define	ETHER_TYPE_802_1X	0x888e		/* 802.1x */
+#ifdef BCMWPA2
+#define	ETHER_TYPE_802_1X_PREAUTH 0x88c7	/* 802.1x preauthentication */
+#endif
+
+/* Broadcom subtype follows ethertype;  First 2 bytes are reserved; Next 2 are subtype; */
+#define	ETHER_BRCM_SUBTYPE_LEN	4		/* Broadcom 4 byte subtype */
+#define	ETHER_BRCM_CRAM		0x1		/* Broadcom subtype cram protocol */
+
+/* ether header */
+#define ETHER_DEST_OFFSET	(0 * ETHER_ADDR_LEN)	/* dest address offset */
+#define ETHER_SRC_OFFSET	(1 * ETHER_ADDR_LEN)	/* src address offset */
+#define ETHER_TYPE_OFFSET	(2 * ETHER_ADDR_LEN)	/* ether type offset */
+
+/*
+ * A macro to validate a length with
+ */
+#define	ETHER_IS_VALID_LEN(foo)	\
+	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
+
+#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
+/*
+ * Structure of a 10Mb/s Ethernet header.
+ */
+struct	ether_header {
+	uint8	ether_dhost[ETHER_ADDR_LEN];
+	uint8	ether_shost[ETHER_ADDR_LEN];
+	uint16	ether_type;
+} PACKED;
+
+/*
+ * Structure of a 48-bit Ethernet address.
+ */
+struct	ether_addr {
+	uint8 octet[ETHER_ADDR_LEN];
+} PACKED;
+#endif	/* !__INCif_etherh Quick and ugly hack for VxWorks */
+
+/*
+ * Takes a pointer, set, test, clear, toggle locally admininistered
+ * address bit in the 48-bit Ethernet address.
+ */
+#define ETHER_SET_LOCALADDR(ea)	(((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] | 2))
+#define ETHER_IS_LOCALADDR(ea) 	(((uint8 *)(ea))[0] & 2)
+#define ETHER_CLR_LOCALADDR(ea)	(((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] & 0xd))
+#define ETHER_TOGGLE_LOCALADDR(ea)	(((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] ^ 2))
+
+/* Takes a pointer, marks unicast address bit in the MAC address */
+#define ETHER_SET_UNICAST(ea)	(((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] & ~1))
+
+/*
+ * Takes a pointer, returns true if a 48-bit multicast address
+ * (including broadcast, since it is all ones)
+ */
+#define ETHER_ISMULTI(ea) (((const uint8 *)(ea))[0] & 1)
+
+
+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
+#define	ether_cmp(a, b)	(!(((short*)a)[0] == ((short*)b)[0]) | \
+			 !(((short*)a)[1] == ((short*)b)[1]) | \
+			 !(((short*)a)[2] == ((short*)b)[2]))
+
+/* copy an ethernet address - assumes the pointers can be referenced as shorts */
+#define	ether_copy(s, d) { \
+		((short*)d)[0] = ((short*)s)[0]; \
+		((short*)d)[1] = ((short*)s)[1]; \
+		((short*)d)[2] = ((short*)s)[2]; }
+
+/*
+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
+ */
+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
+			    ((uint8 *)(ea))[1] &		\
+			    ((uint8 *)(ea))[2] &		\
+			    ((uint8 *)(ea))[3] &		\
+			    ((uint8 *)(ea))[4] &		\
+			    ((uint8 *)(ea))[5]) == 0xff)
+
+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+static const struct ether_addr ether_null = {{0, 0, 0, 0, 0, 0}};
+
+/*
+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
+ */
+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
+			    ((uint8 *)(ea))[1] |		\
+			    ((uint8 *)(ea))[2] |		\
+			    ((uint8 *)(ea))[3] |		\
+			    ((uint8 *)(ea))[4] |		\
+			    ((uint8 *)(ea))[5]) == 0)
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _NET_ETHERNET_H_ */
diff --git a/package/broadcom-57xx/src/proto/vlan.h b/package/broadcom-57xx/src/proto/vlan.h
new file mode 100644
index 0000000000..79cd5891e1
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/vlan.h
@@ -0,0 +1,52 @@
+/*
+ * 802.1Q VLAN protocol definitions
+ *
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: vlan.h,v 1.1.1.4 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _vlan_h_
+#define _vlan_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+#define VLAN_VID_MASK		0xfff	/* low 12 bits are vlan id */
+#define	VLAN_CFI_SHIFT		12	/* canonical format indicator bit */
+#define VLAN_PRI_SHIFT		13	/* user priority */
+
+#define VLAN_PRI_MASK		7	/* 3 bits of priority */
+
+#define	VLAN_TAG_LEN		4
+#define	VLAN_TAG_OFFSET		(2 * ETHER_ADDR_LEN)	/* offset in Ethernet II packet only */
+
+#define VLAN_TPID		0x8100	/* VLAN ethertype/Tag Protocol ID */
+
+struct ethervlan_header {
+	uint8	ether_dhost[ETHER_ADDR_LEN];
+	uint8	ether_shost[ETHER_ADDR_LEN];
+	uint16	vlan_type;		/* 0x8100 */
+	uint16	vlan_tag;		/* priority, cfi and vid */
+	uint16	ether_type;
+};
+
+#define	ETHERVLAN_HDR_LEN	(ETHER_HDR_LEN + VLAN_TAG_LEN)
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _vlan_h_ */
diff --git a/package/broadcom-57xx/src/proto/wpa.h b/package/broadcom-57xx/src/proto/wpa.h
new file mode 100644
index 0000000000..9bb6752b8f
--- /dev/null
+++ b/package/broadcom-57xx/src/proto/wpa.h
@@ -0,0 +1,158 @@
+/*
+ * Fundamental types and constants relating to WPA
+ *
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wpa.h,v 1.1.1.6 2007/05/31 08:00:41 michael Exp $
+ */
+
+#ifndef _proto_wpa_h_
+#define _proto_wpa_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+/* Reason Codes */
+
+/* 13 through 23 taken from IEEE Std 802.11i-2004 */
+#define DOT11_RC_INVALID_WPA_IE		13	/* Invalid info. element */
+#define DOT11_RC_MIC_FAILURE		14	/* Michael failure */
+#define DOT11_RC_4WH_TIMEOUT		15	/* 4-way handshake timeout */
+#define DOT11_RC_GTK_UPDATE_TIMEOUT	16	/* Group key update timeout */
+#define DOT11_RC_WPA_IE_MISMATCH	17	/* WPA IE in 4-way handshake differs from
+						 * (re-)assoc. request/probe response
+						 */
+#define DOT11_RC_INVALID_MC_CIPHER	18	/* Invalid multicast cipher */
+#define DOT11_RC_INVALID_UC_CIPHER	19	/* Invalid unicast cipher */
+#define DOT11_RC_INVALID_AKMP		20	/* Invalid authenticated key management protocol */
+#define DOT11_RC_BAD_WPA_VERSION	21	/* Unsupported WPA version */
+#define DOT11_RC_INVALID_WPA_CAP	22	/* Invalid WPA IE capabilities */
+#define DOT11_RC_8021X_AUTH_FAIL	23	/* 802.1X authentication failure */
+
+#define WPA2_PMKID_LEN	16
+
+/* WPA IE fixed portion */
+typedef struct
+{
+	uint8 tag;	/* TAG */
+	uint8 length;	/* TAG length */
+	uint8 oui[3];	/* IE OUI */
+	uint8 oui_type;	/* OUI type */
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED version;	/* IE version */
+} PACKED wpa_ie_fixed_t;
+#define WPA_IE_OUITYPE_LEN	4
+#define WPA_IE_FIXED_LEN	8
+#define WPA_IE_TAG_FIXED_LEN	6
+
+#ifdef BCMWPA2
+typedef struct {
+	uint8 tag;	/* TAG */
+	uint8 length;	/* TAG length */
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED version;	/* IE version */
+} PACKED wpa_rsn_ie_fixed_t;
+#define WPA_RSN_IE_FIXED_LEN	4
+#define WPA_RSN_IE_TAG_FIXED_LEN	2
+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
+#endif
+
+/* WPA suite/multicast suite */
+typedef struct
+{
+	uint8 oui[3];
+	uint8 type;
+} PACKED wpa_suite_t, wpa_suite_mcast_t;
+#define WPA_SUITE_LEN	4
+
+/* WPA unicast suite list/key management suite list */
+typedef struct
+{
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED count;
+	wpa_suite_t list[1];
+} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
+#define WPA_IE_SUITE_COUNT_LEN	2
+#ifdef BCMWPA2
+typedef struct
+{
+	struct {
+		uint8 low;
+		uint8 high;
+	} PACKED count;
+	wpa_pmkid_t list[1];
+} PACKED wpa_pmkid_list_t;
+#endif
+
+/* WPA cipher suites */
+#define WPA_CIPHER_NONE		0	/* None */
+#define WPA_CIPHER_WEP_40	1	/* WEP (40-bit) */
+#define WPA_CIPHER_TKIP		2	/* TKIP: default for WPA */
+#define WPA_CIPHER_AES_OCB	3	/* AES (OCB) */
+#define WPA_CIPHER_AES_CCM	4	/* AES (CCM) */
+#define WPA_CIPHER_WEP_104	5	/* WEP (104-bit) */
+
+#define IS_WPA_CIPHER(cipher)	((cipher) == WPA_CIPHER_NONE || \
+				 (cipher) == WPA_CIPHER_WEP_40 || \
+				 (cipher) == WPA_CIPHER_WEP_104 || \
+				 (cipher) == WPA_CIPHER_TKIP || \
+				 (cipher) == WPA_CIPHER_AES_OCB || \
+				 (cipher) == WPA_CIPHER_AES_CCM)
+
+/* WPA TKIP countermeasures parameters */
+#define WPA_TKIP_CM_DETECT	60	/* multiple MIC failure window (seconds) */
+#define WPA_TKIP_CM_BLOCK	60	/* countermeasures active window (seconds) */
+
+/* RSN IE defines */
+#define RSN_CAP_LEN		2	/* Length of RSN capabilities field (2 octets) */
+
+/* RSN Capabilities defined in 802.11i */
+#define RSN_CAP_PREAUTH			0x0001
+#define RSN_CAP_NOPAIRWISE		0x0002
+#define RSN_CAP_PTK_REPLAY_CNTR_MASK	0x000C
+#define RSN_CAP_PTK_REPLAY_CNTR_SHIFT	2
+#define RSN_CAP_GTK_REPLAY_CNTR_MASK	0x0030
+#define RSN_CAP_GTK_REPLAY_CNTR_SHIFT	4
+#define RSN_CAP_1_REPLAY_CNTR		0
+#define RSN_CAP_2_REPLAY_CNTRS		1
+#define RSN_CAP_4_REPLAY_CNTRS		2
+#define RSN_CAP_16_REPLAY_CNTRS		3
+
+/* WPA capabilities defined in 802.11i */
+#define WPA_CAP_4_REPLAY_CNTRS		RSN_CAP_4_REPLAY_CNTRS
+#define WPA_CAP_16_REPLAY_CNTRS		RSN_CAP_16_REPLAY_CNTRS
+#define WPA_CAP_REPLAY_CNTR_SHIFT	RSN_CAP_PTK_REPLAY_CNTR_SHIFT
+#define WPA_CAP_REPLAY_CNTR_MASK	RSN_CAP_PTK_REPLAY_CNTR_MASK
+
+/* WPA Specific defines */
+#define WPA_CAP_LEN	RSN_CAP_LEN	/* Length of RSN capabilities in RSN IE (2 octets) */
+
+#define	WPA_CAP_WPA2_PREAUTH		RSN_CAP_PREAUTH
+
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _proto_wpa_h_ */