large init script cleanup and merge of whiterussian changes, new dnsmasq config handling

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@3588 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 69 insertions, 208 deletions

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
new file mode 100755
index 0000000000..4de124735b
--- /dev/null
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram
@@ -0,0 +1,66 @@
+#!/bin/sh
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware.
+
+# WGT634u
+grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
+
+alias debug=${DEBUG:-:}
+
+nvram_default() {
+	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+nvram_set() { # for the linksys fixup part
+	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
+		COMMIT=1
+		/usr/sbin/nvram set "$1=$2"
+	}
+}
+
+# work around braindead CFE defaults in linksys routers
+boardtype=$(nvram get boardtype)
+boardnum=$(nvram get boardnum)
+boardflags=$(($(nvram get boardflags)))
+adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
+
+case "$(( $boardtype ))" in
+	"1800") #0x708
+		if [ "$adm_switch" = 0 ]; then
+			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+			[ "$COMMIT" = 1 ] && {
+				nvram_set sdram_config 0x0062
+				nvram_set clkfreq 216
+				nvram_set sdram_ncdl 0x0
+				nvram_set pa0itssit 62
+				nvram_set pa0b0 0x15eb
+				nvram_set pa0b1 0xfa82
+				nvram_set pa0b2 0xfe66
+				nvram_set pa0maxpwr 0x4e
+			}
+		fi
+	;;
+	"1127") #0x467
+		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+		[ "$COMMIT" = 1 ] && {
+			nvram_set sdram_config 0x0062
+			nvram_set sdram_ncdl 0x0
+			nvram_set pa0itssit 62
+			nvram_set pa0b0 0x168b
+			nvram_set pa0b1 0xfabf
+			nvram_set pa0b2 0xfeaf
+			nvram_set pa0maxpwr 0x4e
+		}
+	;;
+esac
+[ "$COMMIT" = "1" ] && nvram commit
+
+# hack for some motorola routers
+nvram unset wl0gpio0
+
+[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+	# if default wifi mac, set two higher than the lan mac
+	nvram set il0macaddr=$(nvram get et0macaddr|
+	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+}
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
index 51be73b5ba..6a626f54a5 100755
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
@@ -50,7 +50,7 @@ END {
 		c["vlan1ports"] = "4 5"
 		c["lan_ifnames"] = "vlan0 ath0"
 	}
-	if (nvram["boardtype"] == "0x0467") {
+	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
 		c["vlan0ports"] = "0 1 2 3 5*"
 		c["vlan1ports"] = "4 5"
 	}
@@ -101,6 +101,8 @@ END {
 	print ""
 	print "## PPP over Ethernet and PPTP"
 	print "# wan_ifname=\"ppp0\""
+	print "# ppp_username=\"my_username\""
+	print "# ppp_passwd=\"my_password\""
 	print "# pptp_server_ip=\"192.168.0.1\""
 }
 ' > /etc/config/network
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
deleted file mode 100755
index b985948d78..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
+++ /dev/null
@@ -1,166 +0,0 @@
-#!/bin/sh
-# NVRAM setup
-#
-# This file handles the NVRAM quirks of various hardware.
-
-. /etc/network.overrides
-alias debug=${DEBUG:-:}
-
-# WGT634u
-grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
-
-remap () {
-	for type in lan wifi wan pppoe
-	do
-		for s in '' s
-		do
-			eval nvram set ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\" 
-		done
-	done
-}
-
-nvram_default() {
-	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
-}
-
-nvram_set() { # for the linksys fixup part
-	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
-		COMMIT=1
-		/usr/sbin/nvram set "$1=$2"
-	}
-}
-
-# work around braindead CFE defaults in linksys routers
-boardtype=$(nvram get boardtype)
-boardflags=$(($(nvram get boardflags)))
-[ "$boardtype" = "bcm94710dev" ] && boardtype="0xdeadbeef"
-adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
-case "$(( $boardtype ))" in
-	"$((0x708))")
-		if [ "$adm_switch" = 0 ]; then
-			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-			[ "$COMMIT" = 1 ] && {
-				nvram_set sdram_config 0x0062
-				nvram_set clkfreq 216
-				nvram_set sdram_ncdl 0x0
-				nvram_set pa0itssit 62
-				nvram_set pa0b0 0x15eb
-				nvram_set pa0b1 0xfa82
-				nvram_set pa0b2 0xfe66
-				nvram_set pa0maxpwr 0x4e
-			}
-		fi
-	;;
-	"$((0x467))")
-		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
-		[ "$COMMIT" = 1 ] && {
-			nvram_set sdram_config 0x0062
-			nvram_set sdram_ncdl 0x0
-			nvram_set pa0itssit 62
-			nvram_set pa0b0 0x168b
-			nvram_set pa0b1 0xfabf
-			nvram_set pa0b2 0xfeaf
-			nvram_set pa0maxpwr 0x4e
-		}
-	;;
-esac
-[ "$COMMIT" = "1" ] && nvram commit
-
-
-# linksys bug; remove when not using static configuration for lan
-nvram set lan_proto="static"
-
-# hacks for wrt54g 1.x hardware
-[  "$(nvram get boardnum)"  = "42" \
--a "$(nvram get boardtype)" = "bcm94710dev" ] && {
-	debug "### wrt54g 1.x hack ###"
-	nvram set vlan1hwname="et0"
-	nvram set vlan2hwname="et0"
-	remap eth0 vlan2
-	remap eth1 vlan1
-}
-
-# hacks for asus wl-500g deluxe
-[  "$(nvram get boardtype)" = "bcm95365r" \
--a "$(nvram get boardnum)" = "45" ] && {
-	debug "### wl-500g deluxe hacks ###"
-	nvram set vlan0hwname="et0"
-	nvram set vlan1hwname="et0"
-	remap eth0.1 vlan0
-	remap eth0 vlan1
-
-	# set up the vlan*ports variables for the asus wl-500g deluxe
-	# if they don't already exist 
-	nvram_default vlan0ports "1 2 3 4 5*"
-	nvram_default vlan1ports "0 5"
-}
-
-# hacks for asus
-case "$(nvram get productid)" in 
-	WL300g)
-		debug "### wl-300g hacks ###"
-		nvram set lan_ifnames="eth0 eth2"
-		nvram set wan_ifname="none"
-	;;
-	WLHDD)
-		debug "### wl-hdd hacks ###"
-		nvram set lan_ifnames="eth1 eth2"
-		nvram set wan_ifname="none"
-	;;
-	*)
-		# wl-500g defaults. these are placed here, because WL-HDD and WL-300g
-		# might have the same nvram settings.
-		[ "$(nvram get boardnum)" = "asusX" \
-		-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
-			nvram_default wan_device "eth1"
-		}
-	;;
-esac
-
-# hacks for wap54g hardware
-[  "$(nvram get boardnum)" = "2" \
--o "$(nvram get boardnum)" = "1024" ] && {
-	debug "### wap54g hack ###"
-	nvram set wan_ifname="none"
-}
-
-# hacks for buffalo wla2-g54l
-[  "$(nvram get boardnum)" = "00" \
--a "$(nvram get product_name)" = "Product_name" \
--o "$(nvram get product_name)" = "WLA2-G54L" ] && {
-	debug "### wla2-g54l hacks ###"
-	nvram set wan_ifname="none"
-	nvram set lan_ifnames="vlan0"
-}
-
-# needed at least for wrt54gs v1.1 and wrt54g v2.0, v2.2
-[ \! -z "$(nvram get boardrev)" ] && {
-	nvram_default wl0id 0x4320
-}
-
-# defaults
-nvram_default lan_ifname "br0"
-nvram_default lan_ifnames "$FAILSAFE_ifnames"
-
-nvram_default wan_ifname "vlan1"
-nvram_default wan_device "vlan1"
-nvram_default wan_proto "dhcp"
-
-nvram_default wl0_ssid OpenWrt
-nvram_default wl0_mode ap
-nvram_default wl0_infra 1
-nvram_default wl0_radio 1
-
-WAN_PROTO="$(nvram get wan_proto)"
-WAN_IFNAME="$(nvram get wan_ifname)"
-case "$WAN_PROTO" in
-	pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;;
-	*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";;
-esac
-
-[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-	# if default wifi mac, set two higher than the lan mac
-	nvram set il0macaddr=$(nvram get et0macaddr|
-	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-}
-
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/network.overrides b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/network.overrides
deleted file mode 100644
index 72ef012653..0000000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/network.overrides
+++ /dev/null
@@ -1,41 +0,0 @@
-# NVRAM overrides
-#
-# This file handles the NVRAM quirks of various hardware.
-# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
-
-# Load sysconf defaults
-[ -f /etc/sysconf ] && . /etc/sysconf
-
-# hacks for wrt54g 1.x hardware
-[  "$(nvram get boardnum)"  = "42" \
--a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="vlan0 vlan2 eth2"
-
-# hacks for asus wl-500g deluxe
-[  "$(nvram get boardtype)" = "bcm95365r" \
--a "$(nvram get boardnum)" = "45" ] && FAILSAFE_ifnames="vlan0 eth1"
-
-# hacks for wap54g hardware
-[  "$(nvram get boardnum)" = "2" \
--o "$(nvram get boardnum)" = "1024" ] && FAILSAFE_ifnames="eth0 eth1"
-
-# hack for asus wl-500g hardware
-[ "$(nvram get boardnum)" = "asusX" \
--a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="eth0 eth1 eth2"
-  
-FAILSAFE_ifnames=${FAILSAFE_ifnames:-"vlan0 eth1 eth2"}
-
-DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
-DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
-DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
-
-# failsafe if reset is held
-[ "$FAILSAFE" = "true" ] && {
-  echo "### YOU ARE IN FAILSAFE MODE ####"
-  lan_ifname="br0"
-  lan_ifnames=$FAILSAFE_ifnames
-  lan_ipaddr=$DEFAULT_lan_ipaddr
-  lan_netmask=$DEFAULT_lan_netmask
-  lan_hwaddr=$DEFAULT_lan_hwaddr
-  wan_ifname="none"
-  wifi_ifname="none"
-}