move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the developers are ready

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@4944 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 104 deletions

diff --git a/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt b/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt
deleted file mode 100644
index afde786315..0000000000
--- a/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Linux version 2.4.30 (nthill@debian) (gcc version 3.4.4) #2 Sat Aug 13 01:30:32 CEST 2005
-BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
- BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
-128MB LOWMEM available.
-On node 0 totalpages: 32768
-zone(0): 4096 pages.
-zone(1): 28672 pages.
-zone(2): 0 pages.
-DMI not present.
-Kernel command line: blkmtd_device=/dev/hda2 root=/dev/mtdblock0 init=/etc/preinit noinitrd console=ttyS0,19200n8 
-Initializing CPU#0
-Detected 266.650 MHz processor.
-Calibrating delay loop... 532.48 BogoMIPS
-Memory: 127284k/131072k available (1238k kernel code, 3400k reserved, 248k data, 80k init, 0k highmem)
-Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
-Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
-Mount cache hash table entries: 512 (order: 0, 4096 bytes)
-Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
-Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
-CPU:     After generic, caps: 00808131 00818131 00000000 00000001
-CPU:             Common caps: 00808131 00818131 00000000 00000001
-CPU: NSC Unknown stepping 01
-Checking 'hlt' instruction... OK.
-POSIX conformance testing by UNIFIX
-PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0
-PCI: Using configuration type 1
-PCI: Probing PCI hardware
-PCI: Probing PCI hardware (bus 00)
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
-devfs: boot_options: 0x1
-JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
-Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
-pty: 256 Unix98 ptys configured
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-ttyS00 at 0x03f8 (irq = 4) is a 16550A
-ttyS01 at 0x02f8 (irq = 3) is a 16550A
-Software Watchdog Timer: 0.05, timer margin: 60 sec
-RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
-Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
-ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
-SC1200: IDE controller at PCI slot 00:12.2
-SC1200: chipset revision 1
-SC1200: not 100% native mode: will probe irqs later
-    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
-    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
-hda: Transcend 256M, CFA DISK drive
-hdb: HTS424030M9AT00, ATA DISK drive
-SC1200: set xfer mode failure
-hdb: sc1200_set_xfer_mode(UDMA 2)
-blk: queue c02c421c, I/O limit 4095Mb (mask 0xffffffff)
-ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
-hda: attached ide-disk driver.
-hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32
-hdb: attached ide-disk driver.
-hdb: host protected area => 1
-hdb: 58605120 sectors (30006 MB) w/1739KiB Cache, CHS=3648/255/63, UDMA(33)
-Partition check:
- /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
- /dev/ide/host0/bus0/target1/lun0: p1 p2 p3
- /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
-blkmtd: mtd0: [/dev/hda2] erase_size = 128KiB 
-blkmtd: version 1.10
-Initializing Cryptographic API
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 1024 buckets, 8Kbytes
-TCP: Hash tables configured (established 8192 bind 16384)
-ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
-ip_tables: (C) 2000-2002 Netfilter core team
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-NET4: Ethernet Bridge 008 for NET4.0
-802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
-All bugs added by David S. Miller <davem@redhat.com>
-VFS: Mounted root (jffs2 filesystem) readonly.
-Mounted devfs on /dev
-Freeing unused kernel memory: 80k freed
-jffs2.bbc: SIZE compression mode activated.
-natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
-  originally by Donald Becker <becker@scyld.com>
-  http://www.scyld.com/network/natsemi.html
-  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
-eth0: NatSemi DP8381[56] at 0xc88ab000, 00:00:24:c2:45:7c, IRQ 10.
-eth1: NatSemi DP8381[56] at 0xc88ad000, 00:00:24:c2:45:7d, IRQ 10.
-eth2: NatSemi DP8381[56] at 0xc88af000, 00:00:24:c2:45:7e, IRQ 10.
-device eth0 entered promiscuous mode
-eth0: link up.
-eth0: Setting full-duplex based on negotiated link capability.
-eth0: Promiscuous mode enabled.
-eth0: Promiscuous mode enabled.
-eth0: Promiscuous mode enabled.
-eth0: Promiscuous mode enabled.
-eth0: Promiscuous mode enabled.
-br0: port 1(eth0) entering learning state
-br0: port 1(eth0) entering forwarding state
-br0: topology change detected, propagating