Add hardware details for WRT54G v1.1

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@300 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 425 insertions, 0 deletions

diff --git a/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt b/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt
new file mode 100644
index 0000000000..b3cfcfb0b4
--- /dev/null
+++ b/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt
@@ -0,0 +1,16 @@
+system type		: Broadcom BCM947XX
+processor		: 0
+cpu model		: BCM4710 V0.0
+BogoMIPS		: 82.94
+wait instruction	: no
+microsecond timers	: yes
+tlb_entries		: 32
+extra interrupt vector	: no
+hardware watchpoint	: no
+VCED exceptions		: not available
+VCEI exceptions		: not available
+dcache hits		: 2866936757
+dcache misses		: 57830034
+icache hits		: 1724839356
+icache misses		: 431170605
+instructions		: 2156850242
diff --git a/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt b/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt
new file mode 100644
index 0000000000..58e5ce54cc
--- /dev/null
+++ b/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt
@@ -0,0 +1,96 @@
+CPU revision is: 00024000
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005
+Determined physical RAM map:
+ memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4710 rev 0 at 125 MHz
+Using 62.400 MHz high precision timer.
+!unable to setup serial console!
+Calibrating delay loop... 82.94 BogoMIPS
+Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Fixing up bus 0
+PCI: Fixing up bridge
+PCI: Setting latency timer of device 01:00.0 to 64
+PCI: Fixing up bus 1
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+ Amd/Fujitsu Extended Query Table v1.1 at 0x0040
+Physically mapped flash: Swapping erase regions for broken CFI table.
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1fc00000
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000edd94-0x001fd000 : "rootfs"
+mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
+0x003f0000-0x00400000 : "nvram"
+0x00200000-0x003f0000 : "OpenWrt"
+sflash: chipcommon not found
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (squashfs filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Warning: unable to open an initial console.
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 0000041a
+using v1 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E	phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:08.0 to 64
+5325E	phy=FFFFFFFF
+eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 01:08.0 to 64
+PCI: Enabling device 01:08.0 (0004 -> 0006)
+eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan2: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+device eth2 entered promiscuous mode
+br0: port 3(eth2) entering learning state
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan2) entering learning state
+br0: port 3(eth2) entering forwarding state
+br0: topology change detected, propagating
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan2) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
diff --git a/docs/hardware/linksys/wrt54g_v11/ifconfig.txt b/docs/hardware/linksys/wrt54g_v11/ifconfig.txt
new file mode 100644
index 0000000000..a47a11b706
--- /dev/null
+++ b/docs/hardware/linksys/wrt54g_v11/ifconfig.txt
@@ -0,0 +1,54 @@
+br0       Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:6022 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:356276 (347.9 KiB)  TX bytes:457411 (446.6 KiB)
+
+eth0      Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:6204 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:514297 (502.2 KiB)  TX bytes:484047 (472.7 KiB)
+          Interrupt:3 Base address:0x2000 
+
+eth1      Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:56  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:0 (0.0 B)  TX bytes:7209 (7.0 KiB)
+          Interrupt:4 Base address:0x8000 
+
+eth2      Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:57  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:2202
+          TX packets:93 errors:36 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:0 (0.0 B)  TX bytes:11951 (11.6 KiB)
+          Interrupt:6 Base address:0x2000 
+
+lo        Link encap:Local Loopback  
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan1     Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:181 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:19634 (19.1 KiB)  TX bytes:3564 (3.4 KiB)
+
+vlan2     Link encap:Ethernet  HWaddr 00:0C:41:B3:3C:55  
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:6023 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0 
+          RX bytes:382991 (374.0 KiB)  TX bytes:480483 (469.2 KiB)
+
diff --git a/docs/hardware/linksys/wrt54g_v11/info.txt b/docs/hardware/linksys/wrt54g_v11/info.txt
new file mode 100644
index 0000000000..2bd458d160
--- /dev/null
+++ b/docs/hardware/linksys/wrt54g_v11/info.txt
@@ -0,0 +1,23 @@
+Linksys WRT54G v1.1
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601
+
+CPU: BCM4710 at 125 MHz
+RAM: 16 MB
+Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit)
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith
+serial port possible (but not used)
+JTAG interface available (but not used)
+
+List of files:
+nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade 
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
+lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported)
+
+--
+Nico
diff --git a/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt b/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt
new file mode 100644
index 0000000000..d58a02b25f
--- /dev/null
+++ b/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt
@@ -0,0 +1,92 @@
+0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Interrupt: pin ? routed to IRQ 6
+	Region 0: Memory at 18000000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=128M]
+	Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M]
+	Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Interrupt: pin B routed to IRQ 5
+	Region 0: Memory at 18001000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
+	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Latency: 64
+	Interrupt: pin A routed to IRQ 3
+	Region 0: Memory at 18002000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic])
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Interrupt: pin C routed to IRQ 2
+	Region 0: Memory at 18003000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI])
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Interrupt: pin D routed to IRQ 2
+	Region 0: Memory at 18004000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode])
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+
+	Region 0: Memory at 18005000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Region 1: Memory at 08000000 (32-bit, non-prefetchable) [disabled] [size=128M]
+	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
+	I/O behind bridge: 00000000-00000fff
+	Memory behind bridge: 00000000-000fffff
+	Prefetchable memory behind bridge: 00000000-000fffff
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
+
+0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Interrupt: pin ? routed to IRQ 6
+	Region 0: Memory at 18006000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Region 1: Memory at ff200000 (32-bit, non-prefetchable) [disabled] [size=2M]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core
+	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Interrupt: pin E routed to IRQ 2
+	Region 0: Memory at 18007000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Region 1: Memory at 1f000000 (32-bit, non-prefetchable) [disabled] [size=16M]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
+	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Latency: 64
+	Interrupt: pin F routed to IRQ 4
+	Region 0: Memory at 18008000 (32-bit, non-prefetchable) [disabled] [size=4K]
+	Expansion ROM at <unassigned> [disabled] [size=2K]
+
+0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01)
+	Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge
+	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
+	Latency: 64
+	Interrupt: pin A routed to IRQ 6
+	Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=8K]
+	Region 1: Memory at <unassigned> (32-bit, prefetchable) [size=128M]
+
+0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
+	Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603
+	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+	Latency: 64
+	Interrupt: pin A routed to IRQ 6
+	Region 0: Memory at 40002000 (32-bit, non-prefetchable) [size=8K]
+
diff --git a/docs/hardware/linksys/wrt54g_v11/nvram.txt b/docs/hardware/linksys/wrt54g_v11/nvram.txt
new file mode 100644
index 0000000000..6ff7fba698
--- /dev/null
+++ b/docs/hardware/linksys/wrt54g_v11/nvram.txt
@@ -0,0 +1,88 @@
+Intel_firmware_version=v1.41.8
+boardnum=42
+boardtype=bcm94710dev
+boot_date=Fri Sep 26 00:34:47 2003
+boot_ver=v1.5
+boot_wait=on
+clkfreq=125
+dl_ram_addr=a0001000
+et0macaddr=00:0C:41:B3:3C:55
+et0mdcport=0
+et0phyaddr=30
+et1macaddr=00:0C:41:B3:3C:56
+et1mdcport=1
+et1phyaddr=30
+firmware_version=v1.42.2
+flash_type=AMD 29lv320DT 2Mx16 TopB
+lan_ipaddr=192.168.1.1
+lan_netmask=255.255.255.0
+os_flash_addr=bfc40000
+os_ram_addr=80001000
+pmon_ver=PMON 3.31.15.0
+scratch=a0180000
+sdram_config=0x0000
+sdram_init=0x0419
+sdram_ncdl=0x00000000
+sdram_refresh=0x8040
+watchdog=5000
+wl0_active_mac=
+wl0_afterburner=auto
+wl0_afterburner_override=-1
+wl0_antdiv=-1
+wl0_ap_ip=
+wl0_ap_isolate=0
+wl0_ap_ssid=
+wl0_auth=0
+wl0_auth_mode=disabled
+wl0_bcn=100
+wl0_channel=6
+wl0_closed=0
+wl0_corerev=5
+wl0_country=Worldwide
+wl0_country_code=AU
+wl0_crypto=tkip
+wl0_dtim=1
+wl0_frag=2346
+wl0_frameburst=on
+wl0_gmode=1
+wl0_gmode_protection=auto
+wl0_hwaddr=00:0C:41:B3:3C:57
+wl0_ifname=eth2
+wl0_infra=1
+wl0_key1=
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl0_key=1
+wl0_lazywds=1
+wl0_mac_deny=
+wl0_mac_list=
+wl0_maclist=
+wl0_macmode1=disabled
+wl0_macmode=disabled
+wl0_mode=ap
+wl0_mrate=0
+wl0_net_mode=mixed
+wl0_passphrase=
+wl0_phytype=g
+wl0_phytypes=g
+wl0_plcphdr=long
+wl0_radio=1
+wl0_radioids=BCM2050
+wl0_radius_ipaddr=
+wl0_radius_key=
+wl0_radius_port=1812
+wl0_rate=0
+wl0_rateset=default
+wl0_rts=2347
+wl0_ssid=linksys
+wl0_unit=0
+wl0_wds=
+wl0_wep=off
+wl0_wep_bit=64
+wl0_wep_buf=
+wl0_wep_gen=
+wl0_wep_last=
+wl0_wpa_gtk_rekey=3600
+wl0_wpa_psk=
+wl_country_code=AU
diff --git a/docs/hardware/linksys/wrt54g_v11/pci.txt b/docs/hardware/linksys/wrt54g_v11/pci.txt
new file mode 100644
index 0000000000..ac34fc8249
--- /dev/null
+++ b/docs/hardware/linksys/wrt54g_v11/pci.txt
@@ -0,0 +1,56 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0500: PCI device 14e4:0803 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff].
+  Bus  0, device   1, function  0:
+    Class 0200: PCI device 14e4:4711 (rev 0).
+      IRQ 5.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 0).
+      IRQ 3.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0703: PCI device 14e4:4712 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4715 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0604: PCI device 14e4:0804 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+      Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff].
+  Bus  0, device   6, function  0:
+    Class 0b30: PCI device 14e4:0805 (rev 0).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff].
+  Bus  0, device   7, function  0:
+    Class 0501: PCI device 14e4:0811 (rev 0).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff].
+      Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff].
+  Bus  0, device   8, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 0).
+      IRQ 4.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff].
+  Bus  1, device   0, function  0:
+    Class 0600: PCI device 14e4:4710 (rev 1).
+      IRQ 6.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff].
+      Prefetchable 32 bit memory at 0x0 [0x7ffffff].
+  Bus  1, device   8, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 3).
+      IRQ 6.
+      Master Capable.  Latency=64.  
+      Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff].